1 files changed, 3 insertions, 9 deletions

diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
index 4449f565d6c6..d3166e693dcb 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/host/ehci-fsl.c
@@ -130,7 +130,7 @@ static int usb_hcd_fsl_probe(const struct hc_driver *driver,
         }
 
         /* Enable USB controller, 83xx or 8536 */
-        if (pdata->have_sysif_regs)
+        if (pdata->have_sysif_regs && pdata->controller_ver < FSL_USB_VER_1_6)
                 setbits32(hcd->regs + FSL_SOC_USB_CTRL, 0x4);
 
         /* Don't need to set host mode here. It will be done by tdi_reset() */
@@ -232,15 +232,9 @@ static int ehci_fsl_setup_phy(struct usb_hcd *hcd,
         case FSL_USB2_PHY_ULPI:
                 if (pdata->have_sysif_regs && pdata->controller_ver) {
                         /* controller version 1.6 or above */
+                        clrbits32(non_ehci + FSL_SOC_USB_CTRL, UTMI_PHY_EN);
                         setbits32(non_ehci + FSL_SOC_USB_CTRL,
-                                        ULPI_PHY_CLK_SEL);
-                        /*
-                         * Due to controller issue of PHY_CLK_VALID in ULPI
-                         * mode, we set USB_CTRL_USB_EN before checking
-                         * PHY_CLK_VALID, otherwise PHY_CLK_VALID doesn't work.
-                         */
-                        clrsetbits_be32(non_ehci + FSL_SOC_USB_CTRL,
-                                        UTMI_PHY_EN, USB_CTRL_USB_EN);
+                                ULPI_PHY_CLK_SEL | USB_CTRL_USB_EN);
                 }
                 portsc |= PORT_PTS_ULPI;
                 break;