119 files changed, 8126 insertions, 4201 deletions

diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index 7dd73546bf43..7580aa5da0f8 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -6,6 +6,9 @@ menuconfig USB_SUPPORT
         bool "USB support"
         depends on HAS_IOMEM
         default y
+        ---help---
+          This option adds core support for Universal Serial Bus (USB).
+          You will also need drivers from the following menu to make use of it.
 
 if USB_SUPPORT
 
@@ -18,6 +21,7 @@ config USB_ARCH_HAS_HCD
         default y if USB_ARCH_HAS_EHCI
         default y if PCMCIA && !M32R                    # sl811_cs
         default y if ARM                                # SL-811
+        default y if SUPERH                             # r8a66597-hcd
         default PCI
 
 # many non-PCI SOC chips embed OHCI
diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile
index ac49b15fa768..516a6400db43 100644
--- a/drivers/usb/Makefile
+++ b/drivers/usb/Makefile
@@ -28,27 +28,7 @@ obj-$(CONFIG_USB_MICROTEK)	+= image/
 
 obj-$(CONFIG_USB_SERIAL)        += serial/
 
-obj-$(CONFIG_USB_ADUTUX)        += misc/
-obj-$(CONFIG_USB_APPLEDISPLAY)  += misc/
-obj-$(CONFIG_USB_AUERSWALD)     += misc/
-obj-$(CONFIG_USB_BERRY_CHARGE)  += misc/
-obj-$(CONFIG_USB_CYPRESS_CY7C63)+= misc/
-obj-$(CONFIG_USB_CYTHERM)       += misc/
-obj-$(CONFIG_USB_EMI26)         += misc/
-obj-$(CONFIG_USB_EMI62)         += misc/
-obj-$(CONFIG_USB_FTDI_ELAN)     += misc/
-obj-$(CONFIG_USB_IDMOUSE)       += misc/
-obj-$(CONFIG_USB_LCD)           += misc/
-obj-$(CONFIG_USB_LD)            += misc/
-obj-$(CONFIG_USB_LED)           += misc/
-obj-$(CONFIG_USB_LEGOTOWER)     += misc/
-obj-$(CONFIG_USB_PHIDGETSERVO)  += misc/
-obj-$(CONFIG_USB_RIO500)        += misc/
-obj-$(CONFIG_USB_SISUSBVGA)     += misc/
-obj-$(CONFIG_USB_TEST)          += misc/
-obj-$(CONFIG_USB_TRANCEVIBRATOR)+= misc/
-obj-$(CONFIG_USB_USS720)        += misc/
-obj-$(CONFIG_USB_IOWARRIOR)     += misc/
+obj-$(CONFIG_USB)               += misc/
 
 obj-$(CONFIG_USB_ATM)           += atm/
 obj-$(CONFIG_USB_SPEEDTOUCH)    += atm/
diff --git a/drivers/usb/atm/cxacru.c b/drivers/usb/atm/cxacru.c
index 02c52f8d5dbf..a51eeedc18d4 100644
--- a/drivers/usb/atm/cxacru.c
+++ b/drivers/usb/atm/cxacru.c
@@ -456,7 +456,6 @@ static int cxacru_start_wait_urb(struct urb *urb, struct completion *done,
                                  int* actual_length)
 {
         struct timer_list timer;
-        int status = urb->status;
 
         init_timer(&timer);
         timer.expires = jiffies + msecs_to_jiffies(CMD_TIMEOUT);
@@ -468,7 +467,7 @@ static int cxacru_start_wait_urb(struct urb *urb, struct completion *done,
 
         if (actual_length)
                 *actual_length = urb->actual_length;
-        return status;
+        return urb->status; /* must read status after completion */
 }
 
 static int cxacru_cm(struct cxacru_data *instance, enum cxacru_cm_request cm,
@@ -483,7 +482,9 @@ static int cxacru_cm(struct cxacru_data *instance, enum cxacru_cm_request cm,
         int rbuflen = ((rsize - 1) / stride + 1) * CMD_PACKET_SIZE;
 
         if (wbuflen > PAGE_SIZE || rbuflen > PAGE_SIZE) {
-                dbg("too big transfer requested");
+                if (printk_ratelimit())
+                        usb_err(instance->usbatm, "requested transfer size too large (%d, %d)\n",
+                                wbuflen, rbuflen);
                 ret = -ENOMEM;
                 goto fail;
         }
@@ -494,8 +495,9 @@ static int cxacru_cm(struct cxacru_data *instance, enum cxacru_cm_request cm,
         init_completion(&instance->rcv_done);
         ret = usb_submit_urb(instance->rcv_urb, GFP_KERNEL);
         if (ret < 0) {
-                dbg("submitting read urb for cm %#x failed", cm);
-                ret = ret;
+                if (printk_ratelimit())
+                        usb_err(instance->usbatm, "submit of read urb for cm %#x failed (%d)\n",
+                                cm, ret);
                 goto fail;
         }
 
@@ -511,27 +513,29 @@ static int cxacru_cm(struct cxacru_data *instance, enum cxacru_cm_request cm,
         init_completion(&instance->snd_done);
         ret = usb_submit_urb(instance->snd_urb, GFP_KERNEL);
         if (ret < 0) {
-                dbg("submitting write urb for cm %#x failed", cm);
-                ret = ret;
+                if (printk_ratelimit())
+                        usb_err(instance->usbatm, "submit of write urb for cm %#x failed (%d)\n",
+                                cm, ret);
                 goto fail;
         }
 
         ret = cxacru_start_wait_urb(instance->snd_urb, &instance->snd_done, NULL);
         if (ret < 0) {
-                dbg("sending cm %#x failed", cm);
-                ret = ret;
+                if (printk_ratelimit())
+                        usb_err(instance->usbatm, "send of cm %#x failed (%d)\n", cm, ret);
                 goto fail;
         }
 
         ret = cxacru_start_wait_urb(instance->rcv_urb, &instance->rcv_done, &actlen);
         if (ret < 0) {
-                dbg("receiving cm %#x failed", cm);
-                ret = ret;
+                if (printk_ratelimit())
+                        usb_err(instance->usbatm, "receive of cm %#x failed (%d)\n", cm, ret);
                 goto fail;
         }
         if (actlen % CMD_PACKET_SIZE || !actlen) {
-                dbg("response is not a positive multiple of %d: %#x",
-                                CMD_PACKET_SIZE, actlen);
+                if (printk_ratelimit())
+                        usb_err(instance->usbatm, "invalid response length to cm %#x: %d\n",
+                                cm, actlen);
                 ret = -EIO;
                 goto fail;
         }
@@ -539,12 +543,16 @@ static int cxacru_cm(struct cxacru_data *instance, enum cxacru_cm_request cm,
         /* check the return status and copy the data to the output buffer, if needed */
         for (offb = offd = 0; offd < rsize && offb < actlen; offb += CMD_PACKET_SIZE) {
                 if (rbuf[offb] != cm) {
-                        dbg("wrong cm %#x in response", rbuf[offb]);
+                        if (printk_ratelimit())
+                                usb_err(instance->usbatm, "wrong cm %#x in response to cm %#x\n",
+                                        rbuf[offb], cm);
                         ret = -EIO;
                         goto fail;
                 }
                 if (rbuf[offb + 1] != CM_STATUS_SUCCESS) {
-                        dbg("response failed: %#x", rbuf[offb + 1]);
+                        if (printk_ratelimit())
+                                usb_err(instance->usbatm, "response to cm %#x failed: %#x\n",
+                                        cm, rbuf[offb + 1]);
                         ret = -EIO;
                         goto fail;
                 }
@@ -583,14 +591,18 @@ static int cxacru_cm_get_array(struct cxacru_data *instance, enum cxacru_cm_requ
         for (offb = 0; offb < len; ) {
                 int l = le32_to_cpu(buf[offb++]);
                 if (l > stride || l > (len - offb) / 2) {
-                        dbg("wrong data length %#x in response", l);
+                        if (printk_ratelimit())
+                                usb_err(instance->usbatm, "invalid data length from cm %#x: %d\n",
+                                        cm, l);
                         ret = -EIO;
                         goto cleanup;
                 }
                 while (l--) {
                         offd = le32_to_cpu(buf[offb++]);
                         if (offd >= size) {
-                                dbg("wrong index %#x in response", offd);
+                                if (printk_ratelimit())
+                                        usb_err(instance->usbatm, "wrong index #%x in response to cm #%x\n",
+                                                offd, cm);
                                 ret = -EIO;
                                 goto cleanup;
                         }
diff --git a/drivers/usb/atm/speedtch.c b/drivers/usb/atm/speedtch.c
index eb0615abff68..7d27c9cf3c43 100644
--- a/drivers/usb/atm/speedtch.c
+++ b/drivers/usb/atm/speedtch.c
@@ -88,7 +88,7 @@ static const unsigned char DEFAULT_MODEM_OPTION[MODEM_OPTION_LENGTH] = {
 static unsigned int BMaxDSL = DEFAULT_B_MAX_DSL;
 static unsigned char ModemMode = DEFAULT_MODEM_MODE;
 static unsigned char ModemOption[MODEM_OPTION_LENGTH];
-static int num_ModemOption;
+static unsigned int num_ModemOption;
 
 module_param(altsetting, uint, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(altsetting,
@@ -251,7 +251,6 @@ static int speedtch_upload_firmware(struct speedtch_instance_data *instance,
 {
         unsigned char *buffer;
         struct usbatm_data *usbatm = instance->usbatm;
-        struct usb_interface *intf;
         struct usb_device *usb_dev = usbatm->usb_dev;
         int actual_length;
         int ret = 0;
@@ -265,7 +264,7 @@ static int speedtch_upload_firmware(struct speedtch_instance_data *instance,
                 goto out;
         }
 
-        if (!(intf = usb_ifnum_to_if(usb_dev, 2))) {
+        if (!usb_ifnum_to_if(usb_dev, 2)) {
                 ret = -ENODEV;
                 usb_dbg(usbatm, "%s: interface not found!\n", __func__);
                 goto out_free;
diff --git a/drivers/usb/atm/ueagle-atm.c b/drivers/usb/atm/ueagle-atm.c
index a1a1c9d467e0..389c5b164eb2 100644
--- a/drivers/usb/atm/ueagle-atm.c
+++ b/drivers/usb/atm/ueagle-atm.c
@@ -2,7 +2,8 @@
  * Copyright (c) 2003, 2004
  *      Damien Bergamini <damien.bergamini@free.fr>. All rights reserved.
  *
- * Copyright (c) 2005 Matthieu Castet <castet.matthieu@free.fr>
+ * Copyright (c) 2005-2007 Matthieu Castet <castet.matthieu@free.fr>
+ * Copyright (c) 2005-2007 Stanislaw Gruszka <stf_xl@wp.pl>
  *
  * This software is available to you under a choice of one of two
  * licenses. You may choose to be licensed under the terms of the GNU
@@ -107,18 +108,51 @@
 #define uea_info(usb_dev, format,args...) \
         dev_info(&(usb_dev)->dev ,"[ueagle-atm] " format, ##args)
 
-struct uea_cmvs {
+struct intr_pkt;
+
+/* cmv's from firmware */
+struct uea_cmvs_v1 {
         u32 address;
         u16 offset;
         u32 data;
 } __attribute__ ((packed));
 
+struct uea_cmvs_v2 {
+        u32 group;
+        u32 address;
+        u32 offset;
+        u32 data;
+} __attribute__ ((packed));
+
+/* information about currently processed cmv */
+struct cmv_dsc_e1 {
+        u8 function;
+        u16 idx;
+        u32 address;
+        u16 offset;
+};
+
+struct cmv_dsc_e4 {
+        u16 function;
+        u16 offset;
+        u16 address;
+        u16 group;
+};
+
+union cmv_dsc {
+        struct cmv_dsc_e1 e1;
+        struct cmv_dsc_e4 e4;
+};
+
 struct uea_softc {
         struct usb_device *usb_dev;
         struct usbatm_data *usbatm;
 
         int modem_index;
         unsigned int driver_info;
+        int annex;
+#define ANNEXA 0
+#define ANNEXB 1
 
         int booting;
         int reset;
@@ -127,20 +161,23 @@ struct uea_softc {
 
         struct task_struct *kthread;
         u32 data;
-        wait_queue_head_t cmv_ack_wait;
+        u32 data1;
+
         int cmv_ack;
+        union cmv_dsc cmv_dsc;
 
         struct work_struct task;
+        struct workqueue_struct *work_q;
         u16 pageno;
         u16 ovl;
 
         const struct firmware *dsp_firm;
         struct urb *urb_int;
 
-        u8 cmv_function;
-        u16 cmv_idx;
-        u32 cmv_address;
-        u16 cmv_offset;
+        void (*dispatch_cmv) (struct uea_softc *, struct intr_pkt *);
+        void (*schedule_load_page) (struct uea_softc *, struct intr_pkt *);
+        int (*stat) (struct uea_softc *);
+        int (*send_cmvs) (struct uea_softc *);
 
         /* keep in sync with eaglectl */
         struct uea_stats {
@@ -174,10 +211,34 @@ struct uea_softc {
 #define ELSA_PID_PSTFIRM        0x3350
 #define ELSA_PID_PREFIRM        0x3351
 
+#define ELSA_PID_A_PREFIRM      0x3352
+#define ELSA_PID_A_PSTFIRM      0x3353
+#define ELSA_PID_B_PREFIRM      0x3362
+#define ELSA_PID_B_PSTFIRM      0x3363
+
 /*
- * Sagem USB IDs
+ * Devolo IDs : pots if (pid & 0x10)
  */
-#define EAGLE_VID               0x1110
+#define DEVOLO_VID                      0x1039
+#define DEVOLO_EAGLE_I_A_PID_PSTFIRM    0x2110
+#define DEVOLO_EAGLE_I_A_PID_PREFIRM    0x2111
+
+#define DEVOLO_EAGLE_I_B_PID_PSTFIRM    0x2100
+#define DEVOLO_EAGLE_I_B_PID_PREFIRM    0x2101
+
+#define DEVOLO_EAGLE_II_A_PID_PSTFIRM   0x2130
+#define DEVOLO_EAGLE_II_A_PID_PREFIRM   0x2131
+
+#define DEVOLO_EAGLE_II_B_PID_PSTFIRM   0x2120
+#define DEVOLO_EAGLE_II_B_PID_PREFIRM   0x2121
+
+/*
+ * Reference design USB IDs
+ */
+#define ANALOG_VID              0x1110
+#define ADI930_PID_PREFIRM      0x9001
+#define ADI930_PID_PSTFIRM      0x9000
+
 #define EAGLE_I_PID_PREFIRM     0x9010  /* Eagle I */
 #define EAGLE_I_PID_PSTFIRM     0x900F  /* Eagle I */
 
@@ -187,12 +248,12 @@ struct uea_softc {
 #define EAGLE_II_PID_PREFIRM    0x9022  /* Eagle II */
 #define EAGLE_II_PID_PSTFIRM    0x9021  /* Eagle II */
 
-/*
- *  Eagle III Pid
- */
 #define EAGLE_III_PID_PREFIRM   0x9032  /* Eagle III */
 #define EAGLE_III_PID_PSTFIRM   0x9031  /* Eagle III */
 
+#define EAGLE_IV_PID_PREFIRM    0x9042  /* Eagle IV */
+#define EAGLE_IV_PID_PSTFIRM    0x9041  /* Eagle IV */
+
 /*
  * USR USB IDs
  */
@@ -208,11 +269,15 @@ struct uea_softc {
 
 #define PREFIRM 0
 #define PSTFIRM (1<<7)
+#define AUTO_ANNEX_A (1<<8)
+#define AUTO_ANNEX_B (1<<9)
+
 enum {
         ADI930 = 0,
         EAGLE_I,
         EAGLE_II,
-        EAGLE_III
+        EAGLE_III,
+        EAGLE_IV
 };
 
 /* macros for both struct usb_device_id and struct uea_softc */
@@ -221,15 +286,18 @@ enum {
 #define UEA_CHIP_VERSION(x) \
         ((x)->driver_info & 0xf)
 
-#define IS_ISDN(usb_dev) \
-        (le16_to_cpu((usb_dev)->descriptor.bcdDevice) & 0x80)
+#define IS_ISDN(x) \
+        ((x)->annex & ANNEXB)
 
 #define INS_TO_USBDEV(ins) ins->usb_dev
 
 #define GET_STATUS(data) \
         ((data >> 8) & 0xf)
+
 #define IS_OPERATIONAL(sc) \
-        (GET_STATUS(sc->stats.phy.state) == 2)
+        ((UEA_CHIP_VERSION(sc) != EAGLE_IV) ? \
+        (GET_STATUS(sc->stats.phy.state) == 2) : \
+        (sc->stats.phy.state == 7))
 
 /*
  * Set of macros to handle unaligned data in the firmware blob.
@@ -259,7 +327,8 @@ enum {
 #define UEA_INTR_PIPE           0x04
 #define UEA_ISO_DATA_PIPE       0x08
 
-#define UEA_SET_BLOCK           0x0001
+#define UEA_E1_SET_BLOCK        0x0001
+#define UEA_E4_SET_BLOCK        0x002c
 #define UEA_SET_MODE            0x0003
 #define UEA_SET_2183_DATA       0x0004
 #define UEA_SET_TIMEOUT         0x0011
@@ -275,71 +344,179 @@ enum {
 #define UEA_MPTX_MAILBOX        (0x3fd6 | 0x4000)
 #define UEA_MPRX_MAILBOX        (0x3fdf | 0x4000)
 
-/* structure describing a block within a DSP page */
-struct block_info {
+/* block information in eagle4 dsp firmware  */
+struct block_index {
+        __le32 PageOffset;
+        __le32 NotLastBlock;
+        __le32 dummy;
+        __le32 PageSize;
+        __le32 PageAddress;
+        __le16 dummy1;
+        __le16 PageNumber;
+} __attribute__ ((packed));
+
+#define E4_IS_BOOT_PAGE(PageSize) ((le32_to_cpu(PageSize)) & 0x80000000)
+#define E4_PAGE_BYTES(PageSize) ((le32_to_cpu(PageSize) & 0x7fffffff) * 4)
+
+#define E4_L1_STRING_HEADER 0x10
+#define E4_MAX_PAGE_NUMBER 0x58
+#define E4_NO_SWAPPAGE_HEADERS 0x31
+
+/* l1_code is eagle4 dsp firmware format */
+struct l1_code {
+        u8 string_header[E4_L1_STRING_HEADER];
+        u8 page_number_to_block_index[E4_MAX_PAGE_NUMBER];
+        struct block_index page_header[E4_NO_SWAPPAGE_HEADERS];
+        u8 code [0];
+} __attribute__ ((packed));
+
+/* structures describing a block within a DSP page */
+struct block_info_e1 {
         __le16 wHdr;
-#define UEA_BIHDR 0xabcd
         __le16 wAddress;
         __le16 wSize;
         __le16 wOvlOffset;
         __le16 wOvl;            /* overlay */
         __le16 wLast;
 } __attribute__ ((packed));
-#define BLOCK_INFO_SIZE 12
+#define E1_BLOCK_INFO_SIZE 12
+
+struct block_info_e4 {
+        __be16 wHdr;
+        __u8 bBootPage;
+        __u8 bPageNumber;
+        __be32 dwSize;
+        __be32 dwAddress;
+        __be16 wReserved;
+} __attribute__ ((packed));
+#define E4_BLOCK_INFO_SIZE 14
 
-/* structure representing a CMV (Configuration and Management Variable) */
-struct cmv {
-        __le16 wPreamble;
-#define PREAMBLE 0x535c
-        __u8 bDirection;
-#define MODEMTOHOST 0x01
-#define HOSTTOMODEM 0x10
-        __u8 bFunction;
-#define FUNCTION_TYPE(f)    ((f) >> 4)
-#define MEMACCESS       0x1
-#define ADSLDIRECTIVE   0x7
+#define UEA_BIHDR 0xabcd
+#define UEA_RESERVED 0xffff
+
+/* constants describing cmv type */
+#define E1_PREAMBLE 0x535c
+#define E1_MODEMTOHOST 0x01
+#define E1_HOSTTOMODEM 0x10
+
+#define E1_MEMACCESS 0x1
+#define E1_ADSLDIRECTIVE 0x7
+#define E1_FUNCTION_TYPE(f) ((f) >> 4)
+#define E1_FUNCTION_SUBTYPE(f) ((f) & 0x0f)
+
+#define E4_MEMACCESS 0
+#define E4_ADSLDIRECTIVE 0xf
+#define E4_FUNCTION_TYPE(f) ((f) >> 8)
+#define E4_FUNCTION_SIZE(f) ((f) & 0x0f)
+#define E4_FUNCTION_SUBTYPE(f) (((f) >> 4) & 0x0f)
 
-#define FUNCTION_SUBTYPE(f) ((f) & 0x0f)
 /* for MEMACCESS */
-#define REQUESTREAD     0x0
-#define REQUESTWRITE    0x1
-#define REPLYREAD       0x2
-#define REPLYWRITE      0x3
+#define E1_REQUESTREAD  0x0
+#define E1_REQUESTWRITE 0x1
+#define E1_REPLYREAD    0x2
+#define E1_REPLYWRITE   0x3
+
+#define E4_REQUESTREAD  0x0
+#define E4_REQUESTWRITE 0x4
+#define E4_REPLYREAD    (E4_REQUESTREAD | 1)
+#define E4_REPLYWRITE   (E4_REQUESTWRITE | 1)
+
 /* for ADSLDIRECTIVE */
-#define KERNELREADY     0x0
-#define MODEMREADY      0x1
+#define E1_KERNELREADY 0x0
+#define E1_MODEMREADY  0x1
 
-#define MAKEFUNCTION(t, s) (((t) & 0xf) << 4 | ((s) & 0xf))
-        __le16 wIndex;
-        __le32 dwSymbolicAddress;
-#define MAKESA(a, b, c, d)                                              \
+#define E4_KERNELREADY 0x0
+#define E4_MODEMREADY  0x1
+
+#define E1_MAKEFUNCTION(t, s) (((t) & 0xf) << 4 | ((s) & 0xf))
+#define E4_MAKEFUNCTION(t, st, s) (((t) & 0xf) << 8 | ((st) & 0xf) << 4 | ((s) & 0xf))
+
+#define E1_MAKESA(a, b, c, d)                                           \
         (((c) & 0xff) << 24 |                                           \
          ((d) & 0xff) << 16 |                                           \
          ((a) & 0xff) << 8  |                                           \
          ((b) & 0xff))
-#define GETSA1(a) ((a >> 8) & 0xff)
-#define GETSA2(a) (a & 0xff)
-#define GETSA3(a) ((a >> 24) & 0xff)
-#define GETSA4(a) ((a >> 16) & 0xff)
-
-#define SA_CNTL MAKESA('C', 'N', 'T', 'L')
-#define SA_DIAG MAKESA('D', 'I', 'A', 'G')
-#define SA_INFO MAKESA('I', 'N', 'F', 'O')
-#define SA_OPTN MAKESA('O', 'P', 'T', 'N')
-#define SA_RATE MAKESA('R', 'A', 'T', 'E')
-#define SA_STAT MAKESA('S', 'T', 'A', 'T')
+
+#define E1_GETSA1(a) ((a >> 8) & 0xff)
+#define E1_GETSA2(a) (a & 0xff)
+#define E1_GETSA3(a) ((a >> 24) & 0xff)
+#define E1_GETSA4(a) ((a >> 16) & 0xff)
+
+#define E1_SA_CNTL E1_MAKESA('C', 'N', 'T', 'L')
+#define E1_SA_DIAG E1_MAKESA('D', 'I', 'A', 'G')
+#define E1_SA_INFO E1_MAKESA('I', 'N', 'F', 'O')
+#define E1_SA_OPTN E1_MAKESA('O', 'P', 'T', 'N')
+#define E1_SA_RATE E1_MAKESA('R', 'A', 'T', 'E')
+#define E1_SA_STAT E1_MAKESA('S', 'T', 'A', 'T')
+
+#define E4_SA_CNTL 1
+#define E4_SA_STAT 2
+#define E4_SA_INFO 3
+#define E4_SA_TEST 4
+#define E4_SA_OPTN 5
+#define E4_SA_RATE 6
+#define E4_SA_DIAG 7
+#define E4_SA_CNFG 8
+
+/* structures representing a CMV (Configuration and Management Variable) */
+struct cmv_e1 {
+        __le16 wPreamble;
+        __u8 bDirection;
+        __u8 bFunction;
+        __le16 wIndex;
+        __le32 dwSymbolicAddress;
         __le16 wOffsetAddress;
         __le32 dwData;
 } __attribute__ ((packed));
-#define CMV_SIZE 16
 
-/* structure representing swap information */
-struct swap_info {
+struct cmv_e4 {
+        __be16 wGroup;
+        __be16 wFunction;
+        __be16 wOffset;
+        __be16 wAddress;
+        __be32 dwData [6];
+} __attribute__ ((packed));
+
+/* structures representing swap information */
+struct swap_info_e1 {
         __u8 bSwapPageNo;
         __u8 bOvl;              /* overlay */
 } __attribute__ ((packed));
 
-/* structure representing interrupt data */
+struct swap_info_e4 {
+        __u8 bSwapPageNo;
+} __attribute__ ((packed));
+
+/* structures representing interrupt data */
+#define e1_bSwapPageNo  u.e1.s1.swapinfo.bSwapPageNo
+#define e1_bOvl         u.e1.s1.swapinfo.bOvl
+#define e4_bSwapPageNo  u.e4.s1.swapinfo.bSwapPageNo
+
+#define INT_LOADSWAPPAGE 0x0001
+#define INT_INCOMINGCMV  0x0002
+
+union intr_data_e1 {
+        struct {
+                struct swap_info_e1 swapinfo;
+                __le16 wDataSize;
+        } __attribute__ ((packed)) s1;
+        struct {
+                struct cmv_e1 cmv;
+                __le16 wDataSize;
+        } __attribute__ ((packed)) s2;
+} __attribute__ ((packed));
+
+union intr_data_e4 {
+        struct {
+                struct swap_info_e4 swapinfo;
+                __le16 wDataSize;
+        } __attribute__ ((packed)) s1;
+        struct {
+                struct cmv_e4 cmv;
+                __le16 wDataSize;
+        } __attribute__ ((packed)) s2;
+} __attribute__ ((packed));
+
 struct intr_pkt {
         __u8 bType;
         __u8 bNotification;
@@ -347,43 +524,48 @@ struct intr_pkt {
         __le16 wIndex;
         __le16 wLength;
         __le16 wInterrupt;
-#define INT_LOADSWAPPAGE 0x0001
-#define INT_INCOMINGCMV  0x0002
         union {
-                struct {
-                        struct swap_info swapinfo;
-                        __le16 wDataSize;
-                } __attribute__ ((packed)) s1;
-
-                struct {
-                        struct cmv cmv;
-                        __le16 wDataSize;
-                } __attribute__ ((packed)) s2;
-        } __attribute__ ((packed)) u;
-#define bSwapPageNo     u.s1.swapinfo.bSwapPageNo
-#define bOvl            u.s1.swapinfo.bOvl
+                union intr_data_e1 e1;
+                union intr_data_e4 e4;
+        } u;
 } __attribute__ ((packed));
-#define INTR_PKT_SIZE 28
+
+#define E1_INTR_PKT_SIZE 28
+#define E4_INTR_PKT_SIZE 64
 
 static struct usb_driver uea_driver;
 static DEFINE_MUTEX(uea_mutex);
-static const char *chip_name[] = {"ADI930", "Eagle I", "Eagle II", "Eagle III"};
+static const char *chip_name[] = {"ADI930", "Eagle I", "Eagle II", "Eagle III", "Eagle IV"};
 
 static int modem_index;
 static unsigned int debug;
-static int use_iso[NB_MODEM] = {[0 ... (NB_MODEM - 1)] = 1};
+static unsigned int altsetting[NB_MODEM] = {[0 ... (NB_MODEM - 1)] = FASTEST_ISO_INTF};
 static int sync_wait[NB_MODEM];
 static char *cmv_file[NB_MODEM];
+static int annex[NB_MODEM];
 
 module_param(debug, uint, 0644);
 MODULE_PARM_DESC(debug, "module debug level (0=off,1=on,2=verbose)");
-module_param_array(use_iso, bool, NULL, 0644);
-MODULE_PARM_DESC(use_iso, "use isochronous usb pipe for incoming traffic");
+module_param_array(altsetting, uint, NULL, 0644);
+MODULE_PARM_DESC(altsetting, "alternate setting for incoming traffic: 0=bulk, "
+                             "1=isoc slowest, ... , 8=isoc fastest (default)");
 module_param_array(sync_wait, bool, NULL, 0644);
 MODULE_PARM_DESC(sync_wait, "wait the synchronisation before starting ATM");
 module_param_array(cmv_file, charp, NULL, 0644);
 MODULE_PARM_DESC(cmv_file,
                 "file name with configuration and management variables");
+module_param_array(annex, uint, NULL, 0644);
+MODULE_PARM_DESC(annex,
+                 "manually set annex a/b (0=auto, 1=annex a, 2=annex b)");
+
+#define uea_wait(sc, cond, timeo) \
+({ \
+        int _r = wait_event_interruptible_timeout(sc->sync_q, \
+                        (cond) || kthread_should_stop(), timeo); \
+        if (kthread_should_stop()) \
+                _r = -ENODEV; \
+        _r; \
+})
 
 #define UPDATE_ATM_STAT(type, val) \
         do { \
@@ -519,6 +701,9 @@ static int uea_load_firmware(struct usb_device *usb, unsigned int ver)
         case EAGLE_III:
                 fw_name = FW_DIR "eagleIII.fw";
                 break;
+        case EAGLE_IV:
+                fw_name = FW_DIR "eagleIV.fw";
+                break;
         }
 
         ret = request_firmware_nowait(THIS_MODULE, 1, fw_name, &usb->dev, usb, uea_upload_pre_firmware);
@@ -537,7 +722,7 @@ static int uea_load_firmware(struct usb_device *usb, unsigned int ver)
 /*
  * Make sure that the DSP code provided is safe to use.
  */
-static int check_dsp(u8 *dsp, unsigned int len)
+static int check_dsp_e1(u8 *dsp, unsigned int len)
 {
         u8 pagecount, blockcount;
         u16 blocksize;
@@ -588,6 +773,51 @@ static int check_dsp(u8 *dsp, unsigned int len)
         return 0;
 }
 
+static int check_dsp_e4(u8 *dsp, int len)
+{
+        int i;
+        struct l1_code *p = (struct l1_code *) dsp;
+        unsigned int sum = p->code - dsp;
+
+        if (len < sum)
+                return 1;
+
+        if (strcmp("STRATIPHY ANEXA", p->string_header) != 0 &&
+            strcmp("STRATIPHY ANEXB", p->string_header) != 0)
+                return 1;
+
+        for (i = 0; i < E4_MAX_PAGE_NUMBER; i++) {
+                struct block_index *blockidx;
+                u8 blockno = p->page_number_to_block_index[i];
+                if (blockno >= E4_NO_SWAPPAGE_HEADERS)
+                        continue;
+
+                do {
+                        u64 l;
+
+                        if (blockno >= E4_NO_SWAPPAGE_HEADERS)
+                                return 1;
+
+                        blockidx = &p->page_header[blockno++];
+                        if ((u8 *)(blockidx + 1) - dsp  >= len)
+                                return 1;
+
+                        if (le16_to_cpu(blockidx->PageNumber) != i)
+                                return 1;
+
+                        l = E4_PAGE_BYTES(blockidx->PageSize);
+                        sum += l;
+                        l += le32_to_cpu(blockidx->PageOffset);
+                        if (l > len)
+                                return 1;
+
+                /* zero is zero regardless endianes */
+                } while (blockidx->NotLastBlock);
+        }
+
+        return (sum == len) ? 0 : 1;
+}
+
 /*
  * send data to the idma pipe
  * */
@@ -624,13 +854,18 @@ static int request_dsp(struct uea_softc *sc)
         int ret;
         char *dsp_name;
 
-        if (UEA_CHIP_VERSION(sc) == ADI930) {
-                if (IS_ISDN(sc->usb_dev))
+        if (UEA_CHIP_VERSION(sc) == EAGLE_IV) {
+                if (IS_ISDN(sc))
+                        dsp_name = FW_DIR "DSP4i.bin";
+                else
+                        dsp_name = FW_DIR "DSP4p.bin";
+        } else if (UEA_CHIP_VERSION(sc) == ADI930) {
+                if (IS_ISDN(sc))
                         dsp_name = FW_DIR "DSP9i.bin";
                 else
                         dsp_name = FW_DIR "DSP9p.bin";
         } else {
-                if (IS_ISDN(sc->usb_dev))
+                if (IS_ISDN(sc))
                         dsp_name = FW_DIR "DSPei.bin";
                 else
                         dsp_name = FW_DIR "DSPep.bin";
@@ -640,11 +875,16 @@ static int request_dsp(struct uea_softc *sc)
         if (ret < 0) {
                 uea_err(INS_TO_USBDEV(sc),
                        "requesting firmware %s failed with error %d\n",
-                       dsp_name, ret);
+                        dsp_name, ret);
                 return ret;
         }
 
-        if (check_dsp(sc->dsp_firm->data, sc->dsp_firm->size)) {
+        if (UEA_CHIP_VERSION(sc) == EAGLE_IV)
+                ret = check_dsp_e4(sc->dsp_firm->data, sc->dsp_firm->size);
+        else
+                ret = check_dsp_e1(sc->dsp_firm->data, sc->dsp_firm->size);
+
+        if (ret) {
                 uea_err(INS_TO_USBDEV(sc), "firmware %s is corrupted\n",
                        dsp_name);
                 release_firmware(sc->dsp_firm);
@@ -658,12 +898,12 @@ static int request_dsp(struct uea_softc *sc)
 /*
  * The uea_load_page() function must be called within a process context
  */
-static void uea_load_page(struct work_struct *work)
+static void uea_load_page_e1(struct work_struct *work)
 {
         struct uea_softc *sc = container_of(work, struct uea_softc, task);
         u16 pageno = sc->pageno;
         u16 ovl = sc->ovl;
-        struct block_info bi;
+        struct block_info_e1 bi;
 
         u8 *p;
         u8 pagecount, blockcount;
@@ -716,7 +956,7 @@ static void uea_load_page(struct work_struct *work)
                 bi.wLast = cpu_to_le16((i == blockcount - 1) ? 1 : 0);
 
                 /* send block info through the IDMA pipe */
-                if (uea_idma_write(sc, &bi, BLOCK_INFO_SIZE))
+                if (uea_idma_write(sc, &bi, E1_BLOCK_INFO_SIZE))
                         goto bad2;
 
                 /* send block data through the IDMA pipe */
@@ -735,17 +975,114 @@ bad1:
         uea_err(INS_TO_USBDEV(sc), "invalid DSP page %u requested\n", pageno);
 }
 
+static void __uea_load_page_e4(struct uea_softc *sc, u8 pageno, int boot)
+{
+        struct block_info_e4 bi;
+        struct block_index *blockidx;
+        struct l1_code *p = (struct l1_code *) sc->dsp_firm->data;
+        u8 blockno = p->page_number_to_block_index[pageno];
+
+        bi.wHdr = cpu_to_be16(UEA_BIHDR);
+        bi.bBootPage = boot;
+        bi.bPageNumber = pageno;
+        bi.wReserved = cpu_to_be16(UEA_RESERVED);
+
+        do {
+                u8 *blockoffset;
+                unsigned int blocksize;
+
+                blockidx = &p->page_header[blockno];
+                blocksize = E4_PAGE_BYTES(blockidx->PageSize);
+                blockoffset = sc->dsp_firm->data + le32_to_cpu(blockidx->PageOffset);
+
+                bi.dwSize = cpu_to_be32(blocksize);
+                bi.dwAddress = swab32(blockidx->PageAddress);
+
+                uea_dbg(INS_TO_USBDEV(sc),
+                       "sending block %u for DSP page %u size %u adress %x\n",
+                       blockno, pageno, blocksize, le32_to_cpu(blockidx->PageAddress));
+
+                /* send block info through the IDMA pipe */
+                if (uea_idma_write(sc, &bi, E4_BLOCK_INFO_SIZE))
+                        goto bad;
+
+                /* send block data through the IDMA pipe */
+                if (uea_idma_write(sc, blockoffset, blocksize))
+                        goto bad;
+
+                blockno++;
+        } while (blockidx->NotLastBlock);
+
+        return;
+
+bad:
+        uea_err(INS_TO_USBDEV(sc), "sending DSP block %u failed\n", blockno);
+        return;
+}
+
+static void uea_load_page_e4(struct work_struct *work)
+{
+        struct uea_softc *sc = container_of(work, struct uea_softc, task);
+        u8 pageno = sc->pageno;
+        int i;
+        struct block_info_e4 bi;
+        struct l1_code *p;
+
+        uea_dbg(INS_TO_USBDEV(sc), "sending DSP page %u\n", pageno);
+
+        /* reload firmware when reboot start and it's loaded already */
+        if (pageno == 0 && sc->dsp_firm) {
+                release_firmware(sc->dsp_firm);
+                sc->dsp_firm = NULL;
+        }
+
+        if (sc->dsp_firm == NULL && request_dsp(sc) < 0)
+                return;
+
+        p = (struct l1_code *) sc->dsp_firm->data;
+        if (pageno >= p->page_header[0].PageNumber) {
+                uea_err(INS_TO_USBDEV(sc), "invalid DSP page %u requested\n", pageno);
+                return;
+        }
+
+        if (pageno != 0) {
+                __uea_load_page_e4(sc, pageno, 0);
+                return;
+        }
+
+        uea_dbg(INS_TO_USBDEV(sc),
+               "sending Main DSP page %u\n", p->page_header[0].PageNumber);
+
+        for (i = 0; i < le16_to_cpu(p->page_header[0].PageNumber); i++) {
+                if (E4_IS_BOOT_PAGE(p->page_header[i].PageSize))
+                        __uea_load_page_e4(sc, i, 1);
+        }
+
+        uea_dbg(INS_TO_USBDEV(sc),"sending start bi\n");
+
+        bi.wHdr = cpu_to_be16(UEA_BIHDR);
+        bi.bBootPage = 0;
+        bi.bPageNumber = 0xff;
+        bi.wReserved = cpu_to_be16(UEA_RESERVED);
+        bi.dwSize = cpu_to_be32(E4_PAGE_BYTES(p->page_header[0].PageSize));
+        bi.dwAddress = swab32(p->page_header[0].PageAddress);
+
+        /* send block info through the IDMA pipe */
+        if (uea_idma_write(sc, &bi, E4_BLOCK_INFO_SIZE))
+                uea_err(INS_TO_USBDEV(sc), "sending DSP start bi failed\n");
+}
+
 static inline void wake_up_cmv_ack(struct uea_softc *sc)
 {
         BUG_ON(sc->cmv_ack);
         sc->cmv_ack = 1;
-        wake_up(&sc->cmv_ack_wait);
+        wake_up(&sc->sync_q);
 }
 
 static inline int wait_cmv_ack(struct uea_softc *sc)
 {
-        int ret = wait_event_interruptible_timeout(sc->cmv_ack_wait,
-                                                   sc->cmv_ack, ACK_TIMEOUT);
+        int ret = uea_wait(sc, sc->cmv_ack , ACK_TIMEOUT);
+
         sc->cmv_ack = 0;
 
         uea_dbg(INS_TO_USBDEV(sc), "wait_event_timeout : %d ms\n",
@@ -792,33 +1129,34 @@ static int uea_request(struct uea_softc *sc,
         return 0;
 }
 
-static int uea_cmv(struct uea_softc *sc,
+static int uea_cmv_e1(struct uea_softc *sc,
                 u8 function, u32 address, u16 offset, u32 data)
 {
-        struct cmv cmv;
+        struct cmv_e1 cmv;
         int ret;
 
         uea_enters(INS_TO_USBDEV(sc));
         uea_vdbg(INS_TO_USBDEV(sc), "Function : %d-%d, Address : %c%c%c%c, "
                         "offset : 0x%04x, data : 0x%08x\n",
-                        FUNCTION_TYPE(function), FUNCTION_SUBTYPE(function),
-                        GETSA1(address), GETSA2(address), GETSA3(address),
-                        GETSA4(address), offset, data);
+                        E1_FUNCTION_TYPE(function), E1_FUNCTION_SUBTYPE(function),
+                        E1_GETSA1(address), E1_GETSA2(address), E1_GETSA3(address),
+                        E1_GETSA4(address), offset, data);
+
         /* we send a request, but we expect a reply */
-        sc->cmv_function = function | 0x2;
-        sc->cmv_idx++;
-        sc->cmv_address = address;
-        sc->cmv_offset = offset;
+        sc->cmv_dsc.e1.function = function | 0x2;
+        sc->cmv_dsc.e1.idx++;
+        sc->cmv_dsc.e1.address = address;
+        sc->cmv_dsc.e1.offset = offset;
 
-        cmv.wPreamble = cpu_to_le16(PREAMBLE);
-        cmv.bDirection = HOSTTOMODEM;
+        cmv.wPreamble = cpu_to_le16(E1_PREAMBLE);
+        cmv.bDirection = E1_HOSTTOMODEM;
         cmv.bFunction = function;
-        cmv.wIndex = cpu_to_le16(sc->cmv_idx);
+        cmv.wIndex = cpu_to_le16(sc->cmv_dsc.e1.idx);
         put_unaligned(cpu_to_le32(address), &cmv.dwSymbolicAddress);
         cmv.wOffsetAddress = cpu_to_le16(offset);
         put_unaligned(cpu_to_le32(data >> 16 | data << 16), &cmv.dwData);
 
-        ret = uea_request(sc, UEA_SET_BLOCK, UEA_MPTX_START, CMV_SIZE, &cmv);
+        ret = uea_request(sc, UEA_E1_SET_BLOCK, UEA_MPTX_START, sizeof(cmv), &cmv);
         if (ret < 0)
                 return ret;
         ret = wait_cmv_ack(sc);
@@ -826,10 +1164,44 @@ static int uea_cmv(struct uea_softc *sc,
         return ret;
 }
 
-static inline int uea_read_cmv(struct uea_softc *sc,
+static int uea_cmv_e4(struct uea_softc *sc,
+                u16 function, u16 group, u16 address, u16 offset, u32 data)
+{
+        struct cmv_e4 cmv;
+        int ret;
+
+        uea_enters(INS_TO_USBDEV(sc));
+        memset(&cmv, 0, sizeof(cmv));
+
+        uea_vdbg(INS_TO_USBDEV(sc), "Function : %d-%d, Group : 0x%04x, "
+                 "Address : 0x%04x, offset : 0x%04x, data : 0x%08x\n",
+                 E4_FUNCTION_TYPE(function), E4_FUNCTION_SUBTYPE(function),
+                 group, address, offset, data);
+
+        /* we send a request, but we expect a reply */
+        sc->cmv_dsc.e4.function = function | (0x1 << 4);
+        sc->cmv_dsc.e4.offset = offset;
+        sc->cmv_dsc.e4.address = address;
+        sc->cmv_dsc.e4.group = group;
+
+        cmv.wFunction = cpu_to_be16(function);
+        cmv.wGroup = cpu_to_be16(group);
+        cmv.wAddress = cpu_to_be16(address);
+        cmv.wOffset = cpu_to_be16(offset);
+        cmv.dwData[0] = cpu_to_be32(data);
+
+        ret = uea_request(sc, UEA_E4_SET_BLOCK, UEA_MPTX_START, sizeof(cmv), &cmv);
+        if (ret < 0)
+                return ret;
+        ret = wait_cmv_ack(sc);
+        uea_leaves(INS_TO_USBDEV(sc));
+        return ret;
+}
+
+static inline int uea_read_cmv_e1(struct uea_softc *sc,
                 u32 address, u16 offset, u32 *data)
 {
-        int ret = uea_cmv(sc, MAKEFUNCTION(MEMACCESS, REQUESTREAD),
+        int ret = uea_cmv_e1(sc, E1_MAKEFUNCTION(E1_MEMACCESS, E1_REQUESTREAD),
                           address, offset, 0);
         if (ret < 0)
                 uea_err(INS_TO_USBDEV(sc),
@@ -840,10 +1212,27 @@ static inline int uea_read_cmv(struct uea_softc *sc,
         return ret;
 }
 
-static inline int uea_write_cmv(struct uea_softc *sc,
+static inline int uea_read_cmv_e4(struct uea_softc *sc,
+                u8 size, u16 group, u16 address, u16 offset, u32 *data)
+{
+        int ret = uea_cmv_e4(sc, E4_MAKEFUNCTION(E4_MEMACCESS, E4_REQUESTREAD, size),
+                          group, address, offset, 0);
+        if (ret < 0)
+                uea_err(INS_TO_USBDEV(sc),
+                        "reading cmv failed with error %d\n", ret);
+        else {
+                *data = sc->data;
+                /* size is in 16-bit word quantities */
+                if (size > 2)
+                        *(data + 1) = sc->data1;
+        }
+        return ret;
+}
+
+static inline int uea_write_cmv_e1(struct uea_softc *sc,
                 u32 address, u16 offset, u32 data)
 {
-        int ret = uea_cmv(sc, MAKEFUNCTION(MEMACCESS, REQUESTWRITE),
+        int ret = uea_cmv_e1(sc, E1_MAKEFUNCTION(E1_MEMACCESS, E1_REQUESTWRITE),
                           address, offset, data);
         if (ret < 0)
                 uea_err(INS_TO_USBDEV(sc),
@@ -852,12 +1241,48 @@ static inline int uea_write_cmv(struct uea_softc *sc,
         return ret;
 }
 
+static inline int uea_write_cmv_e4(struct uea_softc *sc,
+                u8 size, u16 group, u16 address, u16 offset, u32 data)
+{
+        int ret = uea_cmv_e4(sc, E4_MAKEFUNCTION(E4_MEMACCESS, E4_REQUESTWRITE, size),
+                          group, address, offset, data);
+        if (ret < 0)
+                uea_err(INS_TO_USBDEV(sc),
+                        "writing cmv failed with error %d\n", ret);
+
+        return ret;
+}
+
+static void uea_set_bulk_timeout(struct uea_softc *sc, u32 dsrate)
+{
+        int ret;
+        u16 timeout;
+
+        /* in bulk mode the modem have problem with high rate
+         * changing internal timing could improve things, but the
+         * value is misterious.
+         * ADI930 don't support it (-EPIPE error).
+         */
+
+        if (UEA_CHIP_VERSION(sc) == ADI930 ||
+            altsetting[sc->modem_index] > 0 ||
+            sc->stats.phy.dsrate == dsrate)
+                return;
+
+        /* Original timming (1Mbit/s) from ADI (used in windows driver) */
+        timeout = (dsrate <= 1024*1024) ? 0 : 1;
+        ret = uea_request(sc, UEA_SET_TIMEOUT, timeout, 0, NULL);
+        uea_info(INS_TO_USBDEV(sc), "setting new timeout %d%s\n",
+                 timeout,  ret < 0 ? " failed" : "");
+
+}
+
 /*
  * Monitor the modem and update the stat
  * return 0 if everything is ok
  * return < 0 if an error occurs (-EAGAIN reboot needed)
  */
-static int uea_stat(struct uea_softc *sc)
+static int uea_stat_e1(struct uea_softc *sc)
 {
         u32 data;
         int ret;
@@ -865,7 +1290,7 @@ static int uea_stat(struct uea_softc *sc)
         uea_enters(INS_TO_USBDEV(sc));
         data = sc->stats.phy.state;
 
-        ret = uea_read_cmv(sc, SA_STAT, 0, &sc->stats.phy.state);
+        ret = uea_read_cmv_e1(sc, E1_SA_STAT, 0, &sc->stats.phy.state);
         if (ret < 0)
                 return ret;
 
@@ -885,7 +1310,7 @@ static int uea_stat(struct uea_softc *sc)
 
         case 3:         /* fail ... */
                 uea_info(INS_TO_USBDEV(sc), "modem synchronization failed"
-                                " (may be try other cmv/dsp)\n");
+                                        " (may be try other cmv/dsp)\n");
                 return -EAGAIN;
 
         case 4 ... 6:   /* test state */
@@ -923,7 +1348,7 @@ static int uea_stat(struct uea_softc *sc)
         /* wake up processes waiting for synchronization */
         wake_up(&sc->sync_q);
 
-        ret = uea_read_cmv(sc, SA_DIAG, 2, &sc->stats.phy.flags);
+        ret = uea_read_cmv_e1(sc, E1_SA_DIAG, 2, &sc->stats.phy.flags);
         if (ret < 0)
                 return ret;
         sc->stats.phy.mflags |= sc->stats.phy.flags;
@@ -937,105 +1362,223 @@ static int uea_stat(struct uea_softc *sc)
                 return 0;
         }
 
-        ret = uea_read_cmv(sc, SA_RATE, 0, &data);
+        ret = uea_read_cmv_e1(sc, E1_SA_RATE, 0, &data);
         if (ret < 0)
                 return ret;
 
-        /* in bulk mode the modem have problem with high rate
-         * changing internal timing could improve things, but the
-         * value is misterious.
-         * ADI930 don't support it (-EPIPE error).
-         */
-        if (UEA_CHIP_VERSION(sc) != ADI930
-                    && !use_iso[sc->modem_index]
-                    && sc->stats.phy.dsrate != (data >> 16) * 32) {
-                /* Original timming from ADI(used in windows driver)
-                 * 0x20ffff>>16 * 32 = 32 * 32 = 1Mbits
-                 */
-                u16 timeout = (data <= 0x20ffff) ? 0 : 1;
-                ret = uea_request(sc, UEA_SET_TIMEOUT, timeout, 0, NULL);
-                uea_info(INS_TO_USBDEV(sc),
-                                "setting new timeout %d%s\n", timeout,
-                                ret < 0?" failed":"");
-        }
+        uea_set_bulk_timeout(sc, (data >> 16) * 32);
         sc->stats.phy.dsrate = (data >> 16) * 32;
         sc->stats.phy.usrate = (data & 0xffff) * 32;
         UPDATE_ATM_STAT(link_rate, sc->stats.phy.dsrate * 1000 / 424);
 
-        ret = uea_read_cmv(sc, SA_DIAG, 23, &data);
+        ret = uea_read_cmv_e1(sc, E1_SA_DIAG, 23, &data);
         if (ret < 0)
                 return ret;
         sc->stats.phy.dsattenuation = (data & 0xff) / 2;
 
-        ret = uea_read_cmv(sc, SA_DIAG, 47, &data);
+        ret = uea_read_cmv_e1(sc, E1_SA_DIAG, 47, &data);
         if (ret < 0)
                 return ret;
         sc->stats.phy.usattenuation = (data & 0xff) / 2;
 
-        ret = uea_read_cmv(sc, SA_DIAG, 25, &sc->stats.phy.dsmargin);
+        ret = uea_read_cmv_e1(sc, E1_SA_DIAG, 25, &sc->stats.phy.dsmargin);
         if (ret < 0)
                 return ret;
 
-        ret = uea_read_cmv(sc, SA_DIAG, 49, &sc->stats.phy.usmargin);
+        ret = uea_read_cmv_e1(sc, E1_SA_DIAG, 49, &sc->stats.phy.usmargin);
         if (ret < 0)
                 return ret;
 
-        ret = uea_read_cmv(sc, SA_DIAG, 51, &sc->stats.phy.rxflow);
+        ret = uea_read_cmv_e1(sc, E1_SA_DIAG, 51, &sc->stats.phy.rxflow);
         if (ret < 0)
                 return ret;
 
-        ret = uea_read_cmv(sc, SA_DIAG, 52, &sc->stats.phy.txflow);
+        ret = uea_read_cmv_e1(sc, E1_SA_DIAG, 52, &sc->stats.phy.txflow);
         if (ret < 0)
                 return ret;
 
-        ret = uea_read_cmv(sc, SA_DIAG, 54, &sc->stats.phy.dsunc);
+        ret = uea_read_cmv_e1(sc, E1_SA_DIAG, 54, &sc->stats.phy.dsunc);
         if (ret < 0)
                 return ret;
 
         /* only for atu-c */
-        ret = uea_read_cmv(sc, SA_DIAG, 58, &sc->stats.phy.usunc);
+        ret = uea_read_cmv_e1(sc, E1_SA_DIAG, 58, &sc->stats.phy.usunc);
         if (ret < 0)
                 return ret;
 
-        ret = uea_read_cmv(sc, SA_DIAG, 53, &sc->stats.phy.dscorr);
+        ret = uea_read_cmv_e1(sc, E1_SA_DIAG, 53, &sc->stats.phy.dscorr);
         if (ret < 0)
                 return ret;
 
         /* only for atu-c */
-        ret = uea_read_cmv(sc, SA_DIAG, 57, &sc->stats.phy.uscorr);
+        ret = uea_read_cmv_e1(sc, E1_SA_DIAG, 57, &sc->stats.phy.uscorr);
         if (ret < 0)
                 return ret;
 
-        ret = uea_read_cmv(sc, SA_INFO, 8, &sc->stats.phy.vidco);
+        ret = uea_read_cmv_e1(sc, E1_SA_INFO, 8, &sc->stats.phy.vidco);
         if (ret < 0)
                 return ret;
 
-        ret = uea_read_cmv(sc, SA_INFO, 13, &sc->stats.phy.vidcpe);
+        ret = uea_read_cmv_e1(sc, E1_SA_INFO, 13, &sc->stats.phy.vidcpe);
         if (ret < 0)
                 return ret;
 
         return 0;
 }
 
-static int request_cmvs(struct uea_softc *sc,
-                 struct uea_cmvs **cmvs, const struct firmware **fw)
+static int uea_stat_e4(struct uea_softc *sc)
 {
-        int ret, size;
-        u8 *data;
+        u32 data;
+        u32 tmp_arr[2];
+        int ret;
+
+        uea_enters(INS_TO_USBDEV(sc));
+        data = sc->stats.phy.state;
+
+        /* XXX only need to be done before operationnal... */
+        ret = uea_read_cmv_e4(sc, 1, E4_SA_STAT, 0, 0, &sc->stats.phy.state);
+        if (ret < 0)
+                return ret;
+
+        switch (sc->stats.phy.state) {
+                case 0x0:       /* not yet synchronized */
+                case 0x1:
+                case 0x3:
+                case 0x4:
+                        uea_dbg(INS_TO_USBDEV(sc), "modem not yet synchronized\n");
+                        return 0;
+                case 0x5:       /* initialization */
+                case 0x6:
+                case 0x9:
+                case 0xa:
+                        uea_dbg(INS_TO_USBDEV(sc), "modem initializing\n");
+                        return 0;
+                case 0x2:       /* fail ... */
+                        uea_info(INS_TO_USBDEV(sc), "modem synchronization failed"
+                                        " (may be try other cmv/dsp)\n");
+                        return -EAGAIN;
+                case 0x7:       /* operational */
+                        break;
+                default:
+                        uea_warn(INS_TO_USBDEV(sc), "unknown state: %x\n", sc->stats.phy.state);
+                        return 0;
+        }
+
+        if (data != 7) {
+                uea_request(sc, UEA_SET_MODE, UEA_LOOPBACK_OFF, 0, NULL);
+                uea_info(INS_TO_USBDEV(sc), "modem operational\n");
+
+                /* release the dsp firmware as it is not needed until
+                 * the next failure
+                 */
+                if (sc->dsp_firm) {
+                        release_firmware(sc->dsp_firm);
+                        sc->dsp_firm = NULL;
+                }
+        }
+
+        /* always update it as atm layer could not be init when we switch to
+         * operational state
+         */
+        UPDATE_ATM_STAT(signal, ATM_PHY_SIG_FOUND);
+
+        /* wake up processes waiting for synchronization */
+        wake_up(&sc->sync_q);
+
+        /* TODO improve this state machine :
+         * we need some CMV info : what they do and their unit
+         * we should find the equivalent of eagle3- CMV
+         */
+        /* check flags */
+        ret = uea_read_cmv_e4(sc, 1, E4_SA_DIAG, 0, 0, &sc->stats.phy.flags);
+        if (ret < 0)
+                return ret;
+        sc->stats.phy.mflags |= sc->stats.phy.flags;
+
+        /* in case of a flags ( for example delineation LOSS (& 0x10)),
+         * we check the status again in order to detect the failure earlier
+         */
+        if (sc->stats.phy.flags) {
+                uea_dbg(INS_TO_USBDEV(sc), "Stat flag = 0x%x\n",
+                       sc->stats.phy.flags);
+                if (sc->stats.phy.flags & 1) //delineation LOSS
+                        return -EAGAIN;
+                if (sc->stats.phy.flags & 0x4000) //Reset Flag
+                        return -EAGAIN;
+                return 0;
+        }
+
+        /* rate data may be in upper or lower half of 64 bit word, strange */
+        ret = uea_read_cmv_e4(sc, 4, E4_SA_RATE, 0, 0, tmp_arr);
+        if (ret < 0)
+                return ret;
+        data = (tmp_arr[0]) ? tmp_arr[0] : tmp_arr[1];
+        sc->stats.phy.usrate = data / 1000;
+
+        ret = uea_read_cmv_e4(sc, 4, E4_SA_RATE, 1, 0, tmp_arr);
+        if (ret < 0)
+                return ret;
+        data = (tmp_arr[0]) ? tmp_arr[0] : tmp_arr[1];
+        uea_set_bulk_timeout(sc, data / 1000);
+        sc->stats.phy.dsrate = data / 1000;
+        UPDATE_ATM_STAT(link_rate, sc->stats.phy.dsrate * 1000 / 424);
+
+        ret = uea_read_cmv_e4(sc, 1, E4_SA_INFO, 68, 1, &data);
+        if (ret < 0)
+                return ret;
+        sc->stats.phy.dsattenuation = data / 10;
+
+        ret = uea_read_cmv_e4(sc, 1, E4_SA_INFO, 69, 1, &data);
+        if (ret < 0)
+                return ret;
+        sc->stats.phy.usattenuation = data / 10;
+
+        ret = uea_read_cmv_e4(sc, 1, E4_SA_INFO, 68, 3, &data);
+        if (ret < 0)
+                return ret;
+        sc->stats.phy.dsmargin = data / 2;
+
+        ret = uea_read_cmv_e4(sc, 1, E4_SA_INFO, 69, 3, &data);
+        if (ret < 0)
+                return ret;
+        sc->stats.phy.usmargin = data / 10;
+
+        return 0;
+}
+
+static void cmvs_file_name(struct uea_softc *sc, char *const cmv_name, int ver)
+{
+        char file_arr[] = "CMVxy.bin";
         char *file;
-        char cmv_name[FIRMWARE_NAME_MAX]; /* 30 bytes stack variable */
 
+        /* set proper name corresponding modem version and line type */
         if (cmv_file[sc->modem_index] == NULL) {
                 if (UEA_CHIP_VERSION(sc) == ADI930)
-                        file = (IS_ISDN(sc->usb_dev)) ? "CMV9i.bin" : "CMV9p.bin";
+                        file_arr[3] = '9';
+                else if (UEA_CHIP_VERSION(sc) == EAGLE_IV)
+                        file_arr[3] = '4';
                 else
-                        file = (IS_ISDN(sc->usb_dev)) ? "CMVei.bin" : "CMVep.bin";
+                        file_arr[3] = 'e';
+
+                file_arr[4] = IS_ISDN(sc) ? 'i' : 'p';
+                file = file_arr;
         } else
                 file = cmv_file[sc->modem_index];
 
         strcpy(cmv_name, FW_DIR);
-        strlcat(cmv_name, file, sizeof(cmv_name));
+        strlcat(cmv_name, file, FIRMWARE_NAME_MAX);
+        if (ver == 2)
+                strlcat(cmv_name, ".v2", FIRMWARE_NAME_MAX);
+}
+
+static int request_cmvs_old(struct uea_softc *sc,
+                 void **cmvs, const struct firmware **fw)
+{
+        int ret, size;
+        u8 *data;
+        char cmv_name[FIRMWARE_NAME_MAX]; /* 30 bytes stack variable */
 
+        cmvs_file_name(sc, cmv_name, 1);
         ret = request_firmware(fw, cmv_name, &sc->usb_dev->dev);
         if (ret < 0) {
                 uea_err(INS_TO_USBDEV(sc),
@@ -1045,16 +1588,197 @@ static int request_cmvs(struct uea_softc *sc,
         }
 
         data = (u8 *) (*fw)->data;
-        size = *data * sizeof(struct uea_cmvs) + 1;
-        if (size != (*fw)->size) {
-                uea_err(INS_TO_USBDEV(sc), "firmware %s is corrupted\n",
-                       cmv_name);
-                release_firmware(*fw);
-                return -EILSEQ;
+        size = (*fw)->size;
+        if (size < 1)
+                goto err_fw_corrupted;
+
+        if (size != *data * sizeof(struct uea_cmvs_v1) + 1)
+                goto err_fw_corrupted;
+
+        *cmvs = (void *)(data + 1);
+        return *data;
+
+err_fw_corrupted:
+        uea_err(INS_TO_USBDEV(sc), "firmware %s is corrupted\n", cmv_name);
+        release_firmware(*fw);
+        return -EILSEQ;
+}
+
+static int request_cmvs(struct uea_softc *sc,
+                 void **cmvs, const struct firmware **fw, int *ver)
+{
+        int ret, size;
+        u32 crc;
+        u8 *data;
+        char cmv_name[FIRMWARE_NAME_MAX]; /* 30 bytes stack variable */
+
+        cmvs_file_name(sc, cmv_name, 2);
+        ret = request_firmware(fw, cmv_name, &sc->usb_dev->dev);
+        if (ret < 0) {
+                /* if caller can handle old version, try to provide it */
+                if (*ver == 1) {
+                        uea_warn(INS_TO_USBDEV(sc), "requesting firmware %s failed, "
+                                "try to get older cmvs\n", cmv_name);
+                        return request_cmvs_old(sc, cmvs, fw);
+                }
+                uea_err(INS_TO_USBDEV(sc),
+                       "requesting firmware %s failed with error %d\n",
+                       cmv_name, ret);
+                return ret;
         }
 
-        *cmvs = (struct uea_cmvs *)(data + 1);
+        size = (*fw)->size;
+        data = (u8 *) (*fw)->data;
+        if (size < 4 || strncmp(data, "cmv2", 4) != 0) {
+                if (*ver == 1) {
+                        uea_warn(INS_TO_USBDEV(sc), "firmware %s is corrupted, "
+                                "try to get older cmvs\n", cmv_name);
+                        release_firmware(*fw);
+                        return request_cmvs_old(sc, cmvs, fw);
+                }
+                goto err_fw_corrupted;
+        }
+
+        *ver = 2;
+
+        data += 4;
+        size -= 4;
+        if (size < 5)
+                goto err_fw_corrupted;
+
+        crc = FW_GET_LONG(data);
+        data += 4;
+        size -= 4;
+        if (crc32_be(0, data, size) != crc)
+                goto err_fw_corrupted;
+
+        if (size != *data * sizeof(struct uea_cmvs_v2) + 1)
+                goto err_fw_corrupted;
+
+        *cmvs = (void *) (data + 1);
         return *data;
+
+err_fw_corrupted:
+        uea_err(INS_TO_USBDEV(sc), "firmware %s is corrupted\n", cmv_name);
+        release_firmware(*fw);
+        return -EILSEQ;
+}
+
+static int uea_send_cmvs_e1(struct uea_softc *sc)
+{
+        int i, ret, len;
+        void *cmvs_ptr;
+        const struct firmware *cmvs_fw;
+        int ver = 1; // we can handle v1 cmv firmware version;
+
+        /* Enter in R-IDLE (cmv) until instructed otherwise */
+        ret = uea_write_cmv_e1(sc, E1_SA_CNTL, 0, 1);
+        if (ret < 0)
+                return ret;
+
+        /* Dump firmware version */
+        ret = uea_read_cmv_e1(sc, E1_SA_INFO, 10, &sc->stats.phy.firmid);
+        if (ret < 0)
+                return ret;
+        uea_info(INS_TO_USBDEV(sc), "ATU-R firmware version : %x\n",
+                        sc->stats.phy.firmid);
+
+        /* get options */
+        ret = len = request_cmvs(sc, &cmvs_ptr, &cmvs_fw, &ver);
+        if (ret < 0)
+                return ret;
+
+        /* send options */
+        if (ver == 1) {
+                struct uea_cmvs_v1 *cmvs_v1 = cmvs_ptr;
+
+                uea_warn(INS_TO_USBDEV(sc), "use deprecated cmvs version, "
+                        "please update your firmware\n");
+
+                for (i = 0; i < len; i++) {
+                        ret = uea_write_cmv_e1(sc, FW_GET_LONG(&cmvs_v1[i].address),
+                                                FW_GET_WORD(&cmvs_v1[i].offset),
+                                                FW_GET_LONG(&cmvs_v1[i].data));
+                        if (ret < 0)
+                                goto out;
+                }
+        } else if (ver == 2) {
+                struct uea_cmvs_v2 *cmvs_v2 = cmvs_ptr;
+
+                for (i = 0; i < len; i++) {
+                        ret = uea_write_cmv_e1(sc, FW_GET_LONG(&cmvs_v2[i].address),
+                                                (u16) FW_GET_LONG(&cmvs_v2[i].offset),
+                                                FW_GET_LONG(&cmvs_v2[i].data));
+                        if (ret < 0)
+                                goto out;
+                }
+        } else {
+                /* This realy should not happen */
+                uea_err(INS_TO_USBDEV(sc), "bad cmvs version %d\n", ver);
+                goto out;
+        }
+
+        /* Enter in R-ACT-REQ */
+        ret = uea_write_cmv_e1(sc, E1_SA_CNTL, 0, 2);
+        uea_vdbg(INS_TO_USBDEV(sc), "Entering in R-ACT-REQ state\n");
+        uea_info(INS_TO_USBDEV(sc), "modem started, waiting synchronization...\n");
+out:
+        release_firmware(cmvs_fw);
+        return ret;
+}
+
+static int uea_send_cmvs_e4(struct uea_softc *sc)
+{
+        int i, ret, len;
+        void *cmvs_ptr;
+        const struct firmware *cmvs_fw;
+        int ver = 2; // we can only handle v2 cmv firmware version;
+
+        /* Enter in R-IDLE (cmv) until instructed otherwise */
+        ret = uea_write_cmv_e4(sc, 1, E4_SA_CNTL, 0, 0, 1);
+        if (ret < 0)
+                return ret;
+
+        /* Dump firmware version */
+        /* XXX don't read the 3th byte as it is always 6 */
+        ret = uea_read_cmv_e4(sc, 2, E4_SA_INFO, 55, 0, &sc->stats.phy.firmid);
+        if (ret < 0)
+                return ret;
+        uea_info(INS_TO_USBDEV(sc), "ATU-R firmware version : %x\n",
+                        sc->stats.phy.firmid);
+
+
+        /* get options */
+        ret = len = request_cmvs(sc, &cmvs_ptr, &cmvs_fw, &ver);
+        if (ret < 0)
+                return ret;
+
+        /* send options */
+        if (ver == 2) {
+                struct uea_cmvs_v2 *cmvs_v2 = cmvs_ptr;
+
+                for (i = 0; i < len; i++) {
+                        ret = uea_write_cmv_e4(sc, 1,
+                                                FW_GET_LONG(&cmvs_v2[i].group),
+                                                FW_GET_LONG(&cmvs_v2[i].address),
+                                                FW_GET_LONG(&cmvs_v2[i].offset),
+                                                FW_GET_LONG(&cmvs_v2[i].data));
+                        if (ret < 0)
+                                goto out;
+                }
+        } else {
+                /* This realy should not happen */
+                uea_err(INS_TO_USBDEV(sc), "bad cmvs version %d\n", ver);
+                goto out;
+        }
+
+        /* Enter in R-ACT-REQ */
+        ret = uea_write_cmv_e4(sc, 1, E4_SA_CNTL, 0, 0, 2);
+        uea_vdbg(INS_TO_USBDEV(sc), "Entering in R-ACT-REQ state\n");
+        uea_info(INS_TO_USBDEV(sc), "modem started, waiting synchronization...\n");
+out:
+        release_firmware(cmvs_fw);
+        return ret;
 }
 
 /* Start boot post firmware modem:
@@ -1066,9 +1790,7 @@ static int request_cmvs(struct uea_softc *sc,
 static int uea_start_reset(struct uea_softc *sc)
 {
         u16 zero = 0;   /* ;-) */
-        int i, len, ret;
-        struct uea_cmvs *cmvs;
-        const struct firmware *cmvs_fw;
+        int ret;
 
         uea_enters(INS_TO_USBDEV(sc));
         uea_info(INS_TO_USBDEV(sc), "(re)booting started\n");
@@ -1093,25 +1815,36 @@ static int uea_start_reset(struct uea_softc *sc)
         uea_request(sc, UEA_SET_MODE, UEA_START_RESET, 0, NULL);
 
         /* original driver use 200ms, but windows driver use 100ms */
-        msleep(100);
+        ret = uea_wait(sc, 0, msecs_to_jiffies(100));
+        if (ret < 0)
+                return ret;
 
         /* leave reset mode */
         uea_request(sc, UEA_SET_MODE, UEA_END_RESET, 0, NULL);
 
-        /* clear tx and rx mailboxes */
-        uea_request(sc, UEA_SET_2183_DATA, UEA_MPTX_MAILBOX, 2, &zero);
-        uea_request(sc, UEA_SET_2183_DATA, UEA_MPRX_MAILBOX, 2, &zero);
-        uea_request(sc, UEA_SET_2183_DATA, UEA_SWAP_MAILBOX, 2, &zero);
+        if (UEA_CHIP_VERSION(sc) != EAGLE_IV) {
+                /* clear tx and rx mailboxes */
+                uea_request(sc, UEA_SET_2183_DATA, UEA_MPTX_MAILBOX, 2, &zero);
+                uea_request(sc, UEA_SET_2183_DATA, UEA_MPRX_MAILBOX, 2, &zero);
+                uea_request(sc, UEA_SET_2183_DATA, UEA_SWAP_MAILBOX, 2, &zero);
+        }
+
+        ret = uea_wait(sc, 0, msecs_to_jiffies(1000));
+        if (ret < 0)
+                return ret;
+
+        if (UEA_CHIP_VERSION(sc) == EAGLE_IV)
+                sc->cmv_dsc.e4.function = E4_MAKEFUNCTION(E4_ADSLDIRECTIVE, E4_MODEMREADY, 1);
+        else
+                sc->cmv_dsc.e1.function = E1_MAKEFUNCTION(E1_ADSLDIRECTIVE, E1_MODEMREADY);
 
-        msleep(1000);
-        sc->cmv_function = MAKEFUNCTION(ADSLDIRECTIVE, MODEMREADY);
         /* demask interrupt */
         sc->booting = 0;
 
         /* start loading DSP */
         sc->pageno = 0;
         sc->ovl = 0;
-        schedule_work(&sc->task);
+        queue_work(sc->work_q, &sc->task);
 
         /* wait for modem ready CMV */
         ret = wait_cmv_ack(sc);
@@ -1120,38 +1853,10 @@ static int uea_start_reset(struct uea_softc *sc)
 
         uea_vdbg(INS_TO_USBDEV(sc), "Ready CMV received\n");
 
-        /* Enter in R-IDLE (cmv) until instructed otherwise */
-        ret = uea_write_cmv(sc, SA_CNTL, 0, 1);
+        ret = sc->send_cmvs(sc);
         if (ret < 0)
                 return ret;
 
-        /* Dump firmware version */
-        ret = uea_read_cmv(sc, SA_INFO, 10, &sc->stats.phy.firmid);
-        if (ret < 0)
-                return ret;
-        uea_info(INS_TO_USBDEV(sc), "ATU-R firmware version : %x\n",
-                        sc->stats.phy.firmid);
-
-        /* get options */
-        ret = len = request_cmvs(sc, &cmvs, &cmvs_fw);
-        if (ret < 0)
-                return ret;
-
-        /* send options */
-        for (i = 0; i < len; i++) {
-                ret = uea_write_cmv(sc, FW_GET_LONG(&cmvs[i].address),
-                                        FW_GET_WORD(&cmvs[i].offset),
-                                        FW_GET_LONG(&cmvs[i].data));
-                if (ret < 0)
-                        goto out;
-        }
-        /* Enter in R-ACT-REQ */
-        ret = uea_write_cmv(sc, SA_CNTL, 0, 2);
-        uea_vdbg(INS_TO_USBDEV(sc), "Entering in R-ACT-REQ state\n");
-        uea_info(INS_TO_USBDEV(sc), "Modem started, "
-                "waiting synchronization\n");
-out:
-        release_firmware(cmvs_fw);
         sc->reset = 0;
         uea_leaves(INS_TO_USBDEV(sc));
         return ret;
@@ -1174,12 +1879,10 @@ static int uea_kthread(void *data)
                 if (ret < 0 || sc->reset)
                         ret = uea_start_reset(sc);
                 if (!ret)
-                        ret = uea_stat(sc);
+                        ret = sc->stat(sc);
                 if (ret != -EAGAIN)
-                        msleep_interruptible(1000);
-                if (try_to_freeze())
-                        uea_err(INS_TO_USBDEV(sc), "suspend/resume not supported, "
-                                "please unplug/replug your modem\n");
+                        uea_wait(sc, 0, msecs_to_jiffies(1000));
+                try_to_freeze();
         }
         uea_leaves(INS_TO_USBDEV(sc));
         return ret;
@@ -1234,7 +1937,6 @@ static int load_XILINX_firmware(struct uea_softc *sc)
         if (ret < 0)
                 uea_err(sc->usb_dev, "elsa de-assert failed with error %d\n", ret);
 
-
 err1:
         release_firmware(fw_entry);
 err0:
@@ -1243,40 +1945,41 @@ err0:
 }
 
 /* The modem send us an ack. First with check if it right */
-static void uea_dispatch_cmv(struct uea_softc *sc, struct cmv* cmv)
+static void uea_dispatch_cmv_e1(struct uea_softc *sc, struct intr_pkt *intr)
 {
+        struct cmv_dsc_e1 *dsc = &sc->cmv_dsc.e1;
+        struct cmv_e1 *cmv = &intr->u.e1.s2.cmv;
+
         uea_enters(INS_TO_USBDEV(sc));
-        if (le16_to_cpu(cmv->wPreamble) != PREAMBLE)
+        if (le16_to_cpu(cmv->wPreamble) != E1_PREAMBLE)
                 goto bad1;
 
-        if (cmv->bDirection != MODEMTOHOST)
+        if (cmv->bDirection != E1_MODEMTOHOST)
                 goto bad1;
 
         /* FIXME : ADI930 reply wrong preambule (func = 2, sub = 2) to
          * the first MEMACESS cmv. Ignore it...
          */
-        if (cmv->bFunction != sc->cmv_function) {
+        if (cmv->bFunction != dsc->function) {
                 if (UEA_CHIP_VERSION(sc) == ADI930
-                                && cmv->bFunction ==  MAKEFUNCTION(2, 2)) {
-                        cmv->wIndex = cpu_to_le16(sc->cmv_idx);
-                        put_unaligned(cpu_to_le32(sc->cmv_address), &cmv->dwSymbolicAddress);
-                        cmv->wOffsetAddress = cpu_to_le16(sc->cmv_offset);
-                }
-                else
+                                && cmv->bFunction ==  E1_MAKEFUNCTION(2, 2)) {
+                        cmv->wIndex = cpu_to_le16(dsc->idx);
+                        put_unaligned(cpu_to_le32(dsc->address), &cmv->dwSymbolicAddress);
+                        cmv->wOffsetAddress = cpu_to_le16(dsc->offset);
+                } else
                         goto bad2;
         }
 
-        if (cmv->bFunction == MAKEFUNCTION(ADSLDIRECTIVE, MODEMREADY)) {
+        if (cmv->bFunction == E1_MAKEFUNCTION(E1_ADSLDIRECTIVE, E1_MODEMREADY)) {
                 wake_up_cmv_ack(sc);
                 uea_leaves(INS_TO_USBDEV(sc));
                 return;
         }
 
         /* in case of MEMACCESS */
-        if (le16_to_cpu(cmv->wIndex) != sc->cmv_idx ||
-            le32_to_cpu(get_unaligned(&cmv->dwSymbolicAddress)) !=
-            sc->cmv_address
-            || le16_to_cpu(cmv->wOffsetAddress) != sc->cmv_offset)
+        if (le16_to_cpu(cmv->wIndex) != dsc->idx ||
+            le32_to_cpu(get_unaligned(&cmv->dwSymbolicAddress)) != dsc->address ||
+            le16_to_cpu(cmv->wOffsetAddress) != dsc->offset)
                 goto bad2;
 
         sc->data = le32_to_cpu(get_unaligned(&cmv->dwData));
@@ -1289,8 +1992,8 @@ static void uea_dispatch_cmv(struct uea_softc *sc, struct cmv* cmv)
 bad2:
         uea_err(INS_TO_USBDEV(sc), "unexpected cmv received,"
                         "Function : %d, Subfunction : %d\n",
-                        FUNCTION_TYPE(cmv->bFunction),
-                        FUNCTION_SUBTYPE(cmv->bFunction));
+                        E1_FUNCTION_TYPE(cmv->bFunction),
+                        E1_FUNCTION_SUBTYPE(cmv->bFunction));
         uea_leaves(INS_TO_USBDEV(sc));
         return;
 
@@ -1301,6 +2004,61 @@ bad1:
         uea_leaves(INS_TO_USBDEV(sc));
 }
 
+/* The modem send us an ack. First with check if it right */
+static void uea_dispatch_cmv_e4(struct uea_softc *sc, struct intr_pkt *intr)
+{
+        struct cmv_dsc_e4 *dsc = &sc->cmv_dsc.e4;
+        struct cmv_e4 *cmv = &intr->u.e4.s2.cmv;
+
+        uea_enters(INS_TO_USBDEV(sc));
+        uea_dbg(INS_TO_USBDEV(sc), "cmv %x %x %x %x %x %x\n",
+                be16_to_cpu(cmv->wGroup), be16_to_cpu(cmv->wFunction),
+                be16_to_cpu(cmv->wOffset), be16_to_cpu(cmv->wAddress),
+                be32_to_cpu(cmv->dwData[0]), be32_to_cpu(cmv->dwData[1]));
+
+        if (be16_to_cpu(cmv->wFunction) != dsc->function)
+                goto bad2;
+
+        if (be16_to_cpu(cmv->wFunction) == E4_MAKEFUNCTION(E4_ADSLDIRECTIVE, E4_MODEMREADY, 1)) {
+                wake_up_cmv_ack(sc);
+                uea_leaves(INS_TO_USBDEV(sc));
+                return;
+        }
+
+        /* in case of MEMACCESS */
+        if (be16_to_cpu(cmv->wOffset) != dsc->offset ||
+            be16_to_cpu(cmv->wGroup) != dsc->group ||
+            be16_to_cpu(cmv->wAddress) != dsc->address)
+                goto bad2;
+
+        sc->data = be32_to_cpu(cmv->dwData[0]);
+        sc->data1 = be32_to_cpu(cmv->dwData[1]);
+        wake_up_cmv_ack(sc);
+        uea_leaves(INS_TO_USBDEV(sc));
+        return;
+
+bad2:
+        uea_err(INS_TO_USBDEV(sc), "unexpected cmv received,"
+                        "Function : %d, Subfunction : %d\n",
+                        E4_FUNCTION_TYPE(cmv->wFunction),
+                        E4_FUNCTION_SUBTYPE(cmv->wFunction));
+        uea_leaves(INS_TO_USBDEV(sc));
+        return;
+}
+
+static void uea_schedule_load_page_e1(struct uea_softc *sc, struct intr_pkt *intr)
+{
+        sc->pageno = intr->e1_bSwapPageNo;
+        sc->ovl = intr->e1_bOvl >> 4 | intr->e1_bOvl << 4;
+        queue_work(sc->work_q, &sc->task);
+}
+
+static void uea_schedule_load_page_e4(struct uea_softc *sc, struct intr_pkt *intr)
+{
+        sc->pageno = intr->e4_bSwapPageNo;
+        queue_work(sc->work_q, &sc->task);
+}
+
 /*
  * interrupt handler
  */
@@ -1326,13 +2084,11 @@ static void uea_intr(struct urb *urb)
 
         switch (le16_to_cpu(intr->wInterrupt)) {
         case INT_LOADSWAPPAGE:
-                sc->pageno = intr->bSwapPageNo;
-                sc->ovl = intr->bOvl >> 4 | intr->bOvl << 4;
-                schedule_work(&sc->task);
+                sc->schedule_load_page(sc, intr);
                 break;
 
         case INT_INCOMINGCMV:
-                uea_dispatch_cmv(sc, &intr->u.s2.cmv);
+                sc->dispatch_cmv(sc, intr);
                 break;
 
         default:
@@ -1349,35 +2105,55 @@ resubmit:
  */
 static int uea_boot(struct uea_softc *sc)
 {
-        int ret;
+        int ret, size;
         struct intr_pkt *intr;
 
         uea_enters(INS_TO_USBDEV(sc));
 
-        INIT_WORK(&sc->task, uea_load_page);
+        if (UEA_CHIP_VERSION(sc) == EAGLE_IV) {
+                size = E4_INTR_PKT_SIZE;
+                sc->dispatch_cmv = uea_dispatch_cmv_e4;
+                sc->schedule_load_page = uea_schedule_load_page_e4;
+                sc->stat = uea_stat_e4;
+                sc->send_cmvs = uea_send_cmvs_e4;
+                INIT_WORK(&sc->task, uea_load_page_e4);
+        } else {
+                size = E1_INTR_PKT_SIZE;
+                sc->dispatch_cmv = uea_dispatch_cmv_e1;
+                sc->schedule_load_page = uea_schedule_load_page_e1;
+                sc->stat = uea_stat_e1;
+                sc->send_cmvs = uea_send_cmvs_e1;
+                INIT_WORK(&sc->task, uea_load_page_e1);
+        }
+
         init_waitqueue_head(&sc->sync_q);
-        init_waitqueue_head(&sc->cmv_ack_wait);
+
+        sc->work_q = create_workqueue("ueagle-dsp");
+        if (!sc->work_q) {
+                uea_err(INS_TO_USBDEV(sc), "cannot allocate workqueue\n");
+                uea_leaves(INS_TO_USBDEV(sc));
+                return -ENOMEM;
+        }
 
         if (UEA_CHIP_VERSION(sc) == ADI930)
                 load_XILINX_firmware(sc);
 
-        intr = kmalloc(INTR_PKT_SIZE, GFP_KERNEL);
+        intr = kmalloc(size, GFP_KERNEL);
         if (!intr) {
                 uea_err(INS_TO_USBDEV(sc),
                        "cannot allocate interrupt package\n");
-                uea_leaves(INS_TO_USBDEV(sc));
-                return -ENOMEM;
+                goto err0;
         }
 
         sc->urb_int = usb_alloc_urb(0, GFP_KERNEL);
         if (!sc->urb_int) {
                 uea_err(INS_TO_USBDEV(sc), "cannot allocate interrupt URB\n");
-                goto err;
+                goto err1;
         }
 
         usb_fill_int_urb(sc->urb_int, sc->usb_dev,
                          usb_rcvintpipe(sc->usb_dev, UEA_INTR_PIPE),
-                         intr, INTR_PKT_SIZE, uea_intr, sc,
+                         intr, size, uea_intr, sc,
                          sc->usb_dev->actconfig->interface[0]->altsetting[0].
                          endpoint[0].desc.bInterval);
 
@@ -1385,7 +2161,7 @@ static int uea_boot(struct uea_softc *sc)
         if (ret < 0) {
                 uea_err(INS_TO_USBDEV(sc),
                        "urb submition failed with error %d\n", ret);
-                goto err;
+                goto err1;
         }
 
         sc->kthread = kthread_run(uea_kthread, sc, "ueagle-atm");
@@ -1399,10 +2175,12 @@ static int uea_boot(struct uea_softc *sc)
 
 err2:
         usb_kill_urb(sc->urb_int);
-err:
+err1:
         usb_free_urb(sc->urb_int);
         sc->urb_int = NULL;
         kfree(intr);
+err0:
+        destroy_workqueue(sc->work_q);
         uea_leaves(INS_TO_USBDEV(sc));
         return -ENOMEM;
 }
@@ -1417,15 +2195,15 @@ static void uea_stop(struct uea_softc *sc)
         ret = kthread_stop(sc->kthread);
         uea_dbg(INS_TO_USBDEV(sc), "kthread finish with status %d\n", ret);
 
-        /* stop any pending boot process */
-        flush_scheduled_work();
-
         uea_request(sc, UEA_SET_MODE, UEA_LOOPBACK_ON, 0, NULL);
 
         usb_kill_urb(sc->urb_int);
         kfree(sc->urb_int->transfer_buffer);
         usb_free_urb(sc->urb_int);
 
+        /* stop any pending boot process, when no one can schedule work */
+        destroy_workqueue(sc->work_q);
+
         if (sc->dsp_firm)
                 release_firmware(sc->dsp_firm);
         uea_leaves(INS_TO_USBDEV(sc));
@@ -1487,6 +2265,7 @@ static ssize_t read_human_status(struct device *dev, struct device_attribute *at
                 char *buf)
 {
         int ret = -ENODEV;
+        int modem_state;
         struct uea_softc *sc;
 
         mutex_lock(&uea_mutex);
@@ -1494,7 +2273,34 @@ static ssize_t read_human_status(struct device *dev, struct device_attribute *at
         if (!sc)
                 goto out;
 
-        switch (GET_STATUS(sc->stats.phy.state)) {
+        if (UEA_CHIP_VERSION(sc) == EAGLE_IV) {
+                switch (sc->stats.phy.state) {
+                case 0x0:       /* not yet synchronized */
+                case 0x1:
+                case 0x3:
+                case 0x4:
+                        modem_state = 0;
+                        break;
+                case 0x5:       /* initialization */
+                case 0x6:
+                case 0x9:
+                case 0xa:
+                        modem_state = 1;
+                        break;
+                case 0x7:       /* operational */
+                        modem_state = 2;
+                        break;
+                case 0x2:       /* fail ... */
+                        modem_state = 3;
+                        break;
+                default:        /* unknown */
+                        modem_state = 4;
+                        break;
+                }
+        } else
+                modem_state = GET_STATUS(sc->stats.phy.state);
+
+        switch (modem_state) {
         case 0:
                 ret = sprintf(buf, "Modem is booting\n");
                 break;
@@ -1504,9 +2310,12 @@ static ssize_t read_human_status(struct device *dev, struct device_attribute *at
         case 2:
                 ret = sprintf(buf, "Modem is operational\n");
                 break;
-        default:
+        case 3:
                 ret = sprintf(buf, "Modem synchronization failed\n");
                 break;
+        default:
+                ret = sprintf(buf, "Modem state is unknown\n");
+                break;
         }
 out:
         mutex_unlock(&uea_mutex);
@@ -1520,18 +2329,26 @@ static ssize_t read_delin(struct device *dev, struct device_attribute *attr,
 {
         int ret = -ENODEV;
         struct uea_softc *sc;
+        char *delin = "GOOD";
 
         mutex_lock(&uea_mutex);
         sc = dev_to_uea(dev);
         if (!sc)
                 goto out;
 
-        if (sc->stats.phy.flags & 0x0C00)
-                ret = sprintf(buf, "ERROR\n");
-        else if (sc->stats.phy.flags & 0x0030)
-                ret = sprintf(buf, "LOSS\n");
-        else
-                ret = sprintf(buf, "GOOD\n");
+        if (UEA_CHIP_VERSION(sc) == EAGLE_IV) {
+                if (sc->stats.phy.flags & 0x4000)
+                        delin = "RESET";
+                else if (sc->stats.phy.flags & 0x0001)
+                        delin = "LOSS";
+        } else {
+                if (sc->stats.phy.flags & 0x0C00)
+                        delin = "ERROR";
+                else if (sc->stats.phy.flags & 0x0030)
+                        delin = "LOSS";
+        }
+
+        ret = sprintf(buf, "%s\n", delin);
 out:
         mutex_unlock(&uea_mutex);
         return ret;
@@ -1662,6 +2479,7 @@ static int uea_bind(struct usbatm_data *usbatm, struct usb_interface *intf,
         struct usb_device *usb = interface_to_usbdev(intf);
         struct uea_softc *sc;
         int ret, ifnum = intf->altsetting->desc.bInterfaceNumber;
+        unsigned int alt;
 
         uea_enters(usb);
 
@@ -1696,22 +2514,29 @@ static int uea_bind(struct usbatm_data *usbatm, struct usb_interface *intf,
         sc->modem_index = (modem_index < NB_MODEM) ? modem_index++ : 0;
         sc->driver_info = id->driver_info;
 
-        /* ADI930 don't support iso */
-        if (UEA_CHIP_VERSION(id) != ADI930 && use_iso[sc->modem_index]) {
-                int i;
-
-                /* try set fastest alternate for inbound traffic interface */
-                for (i = FASTEST_ISO_INTF; i > 0; i--)
-                        if (usb_set_interface(usb, UEA_DS_IFACE_NO, i) == 0)
-                                break;
+        /* first try to use module parameter */
+        if (annex[sc->modem_index] == 1)
+                sc->annex = ANNEXA;
+        else if (annex[sc->modem_index] == 2)
+                sc->annex = ANNEXB;
+        /* try to autodetect annex */
+        else if (sc->driver_info & AUTO_ANNEX_A)
+                sc->annex = ANNEXA;
+        else if (sc->driver_info & AUTO_ANNEX_B)
+                sc->annex = ANNEXB;
+        else
+                sc->annex = (le16_to_cpu(sc->usb_dev->descriptor.bcdDevice) & 0x80)?ANNEXB:ANNEXA;
 
-                if (i > 0) {
-                        uea_dbg(usb, "set alternate %d for 2 interface\n", i);
+        alt = altsetting[sc->modem_index];
+        /* ADI930 don't support iso */
+        if (UEA_CHIP_VERSION(id) != ADI930 && alt > 0) {
+                if (alt <= 8 && usb_set_interface(usb, UEA_DS_IFACE_NO, alt) == 0) {
+                        uea_dbg(usb, "set alternate %u for 2 interface\n", alt);
                         uea_info(usb, "using iso mode\n");
                         usbatm->flags |= UDSL_USE_ISOC | UDSL_IGNORE_EILSEQ;
                 } else {
-                        uea_err(usb, "setting any alternate failed for "
-                                        "2 interface, using bulk mode\n");
+                        uea_err(usb, "setting alternate %u failed for "
+                                        "2 interface, using bulk mode\n", alt);
                 }
         }
 
@@ -1721,9 +2546,12 @@ static int uea_bind(struct usbatm_data *usbatm, struct usb_interface *intf,
 
         ret = uea_boot(sc);
         if (ret < 0)
-                goto error;
+                goto error_rm_grp;
 
         return 0;
+
+error_rm_grp:
+        sysfs_remove_group(&intf->dev.kobj, &attr_grp);
 error:
         kfree(sc);
         return ret;
@@ -1754,10 +2582,11 @@ static int uea_probe(struct usb_interface *intf, const struct usb_device_id *id)
         struct usb_device *usb = interface_to_usbdev(intf);
 
         uea_enters(usb);
-        uea_info(usb, "ADSL device founded vid (%#X) pid (%#X) : %s %s\n",
-               le16_to_cpu(usb->descriptor.idVendor),
-               le16_to_cpu(usb->descriptor.idProduct),
-               chip_name[UEA_CHIP_VERSION(id)], IS_ISDN(usb)?"isdn":"pots");
+        uea_info(usb, "ADSL device founded vid (%#X) pid (%#X) Rev (%#X): %s\n",
+                le16_to_cpu(usb->descriptor.idVendor),
+                le16_to_cpu(usb->descriptor.idProduct),
+                le16_to_cpu(usb->descriptor.bcdDevice),
+                chip_name[UEA_CHIP_VERSION(id)]);
 
         usb_reset_device(usb);
 
@@ -1790,24 +2619,40 @@ static void uea_disconnect(struct usb_interface *intf)
  * List of supported VID/PID
  */
 static const struct usb_device_id uea_ids[] = {
+        {USB_DEVICE(ANALOG_VID, ADI930_PID_PREFIRM),    .driver_info = ADI930 | PREFIRM},
+        {USB_DEVICE(ANALOG_VID, ADI930_PID_PSTFIRM),    .driver_info = ADI930 | PSTFIRM},
+        {USB_DEVICE(ANALOG_VID, EAGLE_I_PID_PREFIRM),   .driver_info = EAGLE_I | PREFIRM},
+        {USB_DEVICE(ANALOG_VID, EAGLE_I_PID_PSTFIRM),   .driver_info = EAGLE_I | PSTFIRM},
+        {USB_DEVICE(ANALOG_VID, EAGLE_II_PID_PREFIRM),  .driver_info = EAGLE_II | PREFIRM},
+        {USB_DEVICE(ANALOG_VID, EAGLE_II_PID_PSTFIRM),  .driver_info = EAGLE_II | PSTFIRM},
+        {USB_DEVICE(ANALOG_VID, EAGLE_IIC_PID_PREFIRM), .driver_info = EAGLE_II | PREFIRM},
+        {USB_DEVICE(ANALOG_VID, EAGLE_IIC_PID_PSTFIRM), .driver_info = EAGLE_II | PSTFIRM},
+        {USB_DEVICE(ANALOG_VID, EAGLE_III_PID_PREFIRM), .driver_info = EAGLE_III | PREFIRM},
+        {USB_DEVICE(ANALOG_VID, EAGLE_III_PID_PSTFIRM), .driver_info = EAGLE_III | PSTFIRM},
+        {USB_DEVICE(ANALOG_VID, EAGLE_IV_PID_PREFIRM),  .driver_info = EAGLE_IV | PREFIRM},
+        {USB_DEVICE(ANALOG_VID, EAGLE_IV_PID_PSTFIRM),  .driver_info = EAGLE_IV | PSTFIRM},
+        {USB_DEVICE(DEVOLO_VID, DEVOLO_EAGLE_I_A_PID_PREFIRM),  .driver_info = EAGLE_I | PREFIRM},
+        {USB_DEVICE(DEVOLO_VID, DEVOLO_EAGLE_I_A_PID_PSTFIRM),  .driver_info = EAGLE_I | PSTFIRM | AUTO_ANNEX_A},
+        {USB_DEVICE(DEVOLO_VID, DEVOLO_EAGLE_I_B_PID_PREFIRM),  .driver_info = EAGLE_I | PREFIRM},
+        {USB_DEVICE(DEVOLO_VID, DEVOLO_EAGLE_I_B_PID_PSTFIRM),  .driver_info = EAGLE_I | PSTFIRM | AUTO_ANNEX_B},
+        {USB_DEVICE(DEVOLO_VID, DEVOLO_EAGLE_II_A_PID_PREFIRM), .driver_info = EAGLE_II | PREFIRM},
+        {USB_DEVICE(DEVOLO_VID, DEVOLO_EAGLE_II_A_PID_PSTFIRM), .driver_info = EAGLE_II | PSTFIRM | AUTO_ANNEX_A},
+        {USB_DEVICE(DEVOLO_VID, DEVOLO_EAGLE_II_B_PID_PREFIRM), .driver_info = EAGLE_II | PREFIRM},
+        {USB_DEVICE(DEVOLO_VID, DEVOLO_EAGLE_II_B_PID_PSTFIRM), .driver_info = EAGLE_II | PSTFIRM | AUTO_ANNEX_B},
         {USB_DEVICE(ELSA_VID,   ELSA_PID_PREFIRM),      .driver_info = ADI930 | PREFIRM},
         {USB_DEVICE(ELSA_VID,   ELSA_PID_PSTFIRM),      .driver_info = ADI930 | PSTFIRM},
-        {USB_DEVICE(EAGLE_VID,  EAGLE_I_PID_PREFIRM),   .driver_info = EAGLE_I | PREFIRM},
-        {USB_DEVICE(EAGLE_VID,  EAGLE_I_PID_PSTFIRM),   .driver_info = EAGLE_I | PSTFIRM},
-        {USB_DEVICE(EAGLE_VID,  EAGLE_II_PID_PREFIRM),  .driver_info = EAGLE_II | PREFIRM},
-        {USB_DEVICE(EAGLE_VID,  EAGLE_II_PID_PSTFIRM),  .driver_info = EAGLE_II | PSTFIRM},
-        {USB_DEVICE(EAGLE_VID,  EAGLE_IIC_PID_PREFIRM), .driver_info = EAGLE_II | PREFIRM},
-        {USB_DEVICE(EAGLE_VID,  EAGLE_IIC_PID_PSTFIRM), .driver_info = EAGLE_II | PSTFIRM},
-        {USB_DEVICE(EAGLE_VID,  EAGLE_III_PID_PREFIRM), .driver_info = EAGLE_III | PREFIRM},
-        {USB_DEVICE(EAGLE_VID,  EAGLE_III_PID_PSTFIRM), .driver_info = EAGLE_III | PSTFIRM},
+        {USB_DEVICE(ELSA_VID,   ELSA_PID_A_PREFIRM),    .driver_info = ADI930 | PREFIRM},
+        {USB_DEVICE(ELSA_VID,   ELSA_PID_A_PSTFIRM),    .driver_info = ADI930 | PSTFIRM | AUTO_ANNEX_A},
+        {USB_DEVICE(ELSA_VID,   ELSA_PID_B_PREFIRM),    .driver_info = ADI930 | PREFIRM},
+        {USB_DEVICE(ELSA_VID,   ELSA_PID_B_PSTFIRM),    .driver_info = ADI930 | PSTFIRM | AUTO_ANNEX_B},
         {USB_DEVICE(USR_VID,    MILLER_A_PID_PREFIRM),  .driver_info = EAGLE_I | PREFIRM},
-        {USB_DEVICE(USR_VID,    MILLER_A_PID_PSTFIRM),  .driver_info = EAGLE_I | PSTFIRM},
+        {USB_DEVICE(USR_VID,    MILLER_A_PID_PSTFIRM),  .driver_info = EAGLE_I | PSTFIRM  | AUTO_ANNEX_A},
         {USB_DEVICE(USR_VID,    MILLER_B_PID_PREFIRM),  .driver_info = EAGLE_I | PREFIRM},
-        {USB_DEVICE(USR_VID,    MILLER_B_PID_PSTFIRM),  .driver_info = EAGLE_I | PSTFIRM},
+        {USB_DEVICE(USR_VID,    MILLER_B_PID_PSTFIRM),  .driver_info = EAGLE_I | PSTFIRM  | AUTO_ANNEX_B},
         {USB_DEVICE(USR_VID,    HEINEKEN_A_PID_PREFIRM),.driver_info = EAGLE_I | PREFIRM},
-        {USB_DEVICE(USR_VID,    HEINEKEN_A_PID_PSTFIRM),.driver_info = EAGLE_I | PSTFIRM},
+        {USB_DEVICE(USR_VID,    HEINEKEN_A_PID_PSTFIRM),.driver_info = EAGLE_I | PSTFIRM | AUTO_ANNEX_A},
         {USB_DEVICE(USR_VID,    HEINEKEN_B_PID_PREFIRM),.driver_info = EAGLE_I | PREFIRM},
-        {USB_DEVICE(USR_VID,    HEINEKEN_B_PID_PSTFIRM),.driver_info = EAGLE_I | PSTFIRM},
+        {USB_DEVICE(USR_VID,    HEINEKEN_B_PID_PSTFIRM),.driver_info = EAGLE_I | PSTFIRM | AUTO_ANNEX_B},
         {}
 };
 
diff --git a/drivers/usb/atm/xusbatm.c b/drivers/usb/atm/xusbatm.c
index 70125c6d3be4..8472543eee81 100644
--- a/drivers/usb/atm/xusbatm.c
+++ b/drivers/usb/atm/xusbatm.c
@@ -29,7 +29,7 @@
 
 #define XUSBATM_PARM(name, type, parmtype, desc) \
         static type name[XUSBATM_DRIVERS_MAX]; \
-        static int num_##name; \
+        static unsigned int num_##name; \
         module_param_array(name, parmtype, &num_##name, 0444); \
         MODULE_PARM_DESC(name, desc)
 
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index fe940e0536e0..f51e22490edf 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -921,6 +921,10 @@ skip_normal_probe:
                         return -EINVAL;
                 }
         }
+
+        /* Accept probe requests only for the control interface */
+        if (intf != control_interface)
+                return -ENODEV;
         
         if (usb_interface_claimed(data_interface)) { /* valid in this context */
                 dev_dbg(&intf->dev,"The data interface isn't available");
@@ -1109,10 +1113,12 @@ static void acm_disconnect(struct usb_interface *intf)
                 return;
         }
         if (acm->country_codes){
-                device_remove_file(&intf->dev, &dev_attr_wCountryCodes);
-                device_remove_file(&intf->dev, &dev_attr_iCountryCodeRelDate);
+                device_remove_file(&acm->control->dev,
+                                &dev_attr_wCountryCodes);
+                device_remove_file(&acm->control->dev,
+                                &dev_attr_iCountryCodeRelDate);
         }
-        device_remove_file(&intf->dev, &dev_attr_bmCapabilities);
+        device_remove_file(&acm->control->dev, &dev_attr_bmCapabilities);
         acm->dev = NULL;
         usb_set_intfdata(acm->control, NULL);
         usb_set_intfdata(acm->data, NULL);
diff --git a/drivers/usb/class/usblp.c b/drivers/usb/class/usblp.c
index 5192cd9356de..ad632f2d6f94 100644
--- a/drivers/usb/class/usblp.c
+++ b/drivers/usb/class/usblp.c
@@ -28,6 +28,7 @@
  *      v0.12 - add hpoj.sourceforge.net ioctls (David Paschal)
  *      v0.13 - alloc space for statusbuf (<status> not on stack);
  *              use usb_buffer_alloc() for read buf & write buf;
+ *      none  - Maintained in Linux kernel after v0.13
  */
 
 /*
@@ -69,7 +70,6 @@
 #define USBLP_DEVICE_ID_SIZE    1024
 
 /* ioctls: */
-#define LPGETSTATUS             0x060b          /* same as in drivers/char/lp.c */
 #define IOCNR_GET_DEVICE_ID             1
 #define IOCNR_GET_PROTOCOLS             2
 #define IOCNR_SET_PROTOCOL              3
@@ -115,7 +115,7 @@ MFG:HEWLETT-PACKARD;MDL:DESKJET 970C;CMD:MLC,PCL,PML;CLASS:PRINTER;DESCRIPTION:H
 #define USBLP_MINORS            16
 #define USBLP_MINOR_BASE        0
 
-#define USBLP_WRITE_TIMEOUT     (5000)                  /* 5 seconds */
+#define USBLP_CTL_TIMEOUT       5000                    /* 5 seconds */
 
 #define USBLP_FIRST_PROTOCOL    1
 #define USBLP_LAST_PROTOCOL     3
@@ -159,10 +159,12 @@ struct usblp {
         int                     wstatus;        /* bytes written or error */
         int                     rstatus;        /* bytes ready or error */
         unsigned int            quirks;                 /* quirks flags */
+        unsigned int            flags;                  /* mode flags */
         unsigned char           used;                   /* True if open */
         unsigned char           present;                /* True if not disconnected */
         unsigned char           bidir;                  /* interface is bidirectional */
         unsigned char           sleeping;               /* interface is suspended */
+        unsigned char           no_paper;               /* Paper Out happened */
         unsigned char           *device_id_string;      /* IEEE 1284 DEVICE ID string (ptr) */
                                                         /* first 2 bytes are (big-endian) length */
 };
@@ -259,7 +261,7 @@ static int usblp_ctrl_msg(struct usblp *usblp, int request, int type, int dir, i
 
         retval = usb_control_msg(usblp->dev,
                 dir ? usb_rcvctrlpipe(usblp->dev, 0) : usb_sndctrlpipe(usblp->dev, 0),
-                request, type | dir | recip, value, index, buf, len, USBLP_WRITE_TIMEOUT);
+                request, type | dir | recip, value, index, buf, len, USBLP_CTL_TIMEOUT);
         dbg("usblp_control_msg: rq: 0x%02x dir: %d recip: %d value: %d idx: %d len: %#x result: %d",
                 request, !!dir, recip, value, index, len, retval);
         return retval < 0 ? retval : 0;
@@ -325,13 +327,11 @@ static void usblp_bulk_write(struct urb *urb)
                 usblp->wstatus = status;
         else
                 usblp->wstatus = urb->actual_length;
+        usblp->no_paper = 0;
         usblp->wcomplete = 1;
         wake_up(&usblp->wwait);
         spin_unlock(&usblp->lock);
 
-        /* XXX Use usb_setup_bulk_urb when available. Talk to Marcel. */
-        kfree(urb->transfer_buffer);
-        urb->transfer_buffer = NULL;    /* Not refcounted, so to be safe... */
         usb_free_urb(urb);
 }
 
@@ -346,16 +346,17 @@ static int usblp_check_status(struct usblp *usblp, int err)
         unsigned char status, newerr = 0;
         int error;
 
-        error = usblp_read_status (usblp, usblp->statusbuf);
-        if (error < 0) {
+        mutex_lock(&usblp->mut);
+        if ((error = usblp_read_status(usblp, usblp->statusbuf)) < 0) {
+                mutex_unlock(&usblp->mut);
                 if (printk_ratelimit())
                         printk(KERN_ERR
                                 "usblp%d: error %d reading printer status\n",
                                 usblp->minor, error);
                 return 0;
         }
-
         status = *usblp->statusbuf;
+        mutex_unlock(&usblp->mut);
 
         if (~status & LP_PERRORP)
                 newerr = 3;
@@ -411,18 +412,10 @@ static int usblp_open(struct inode *inode, struct file *file)
                 goto out;
 
         /*
-         * TODO: need to implement LP_ABORTOPEN + O_NONBLOCK as in drivers/char/lp.c ???
-         * This is #if 0-ed because we *don't* want to fail an open
-         * just because the printer is off-line.
+         * We do not implement LP_ABORTOPEN/LPABORTOPEN for two reasons:
+         *  - We do not want persistent state which close(2) does not clear
+         *  - It is not used anyway, according to CUPS people
          */
-#if 0
-        if ((retval = usblp_check_status(usblp, 0))) {
-                retval = retval > 1 ? -EIO : -ENOSPC;
-                goto out;
-        }
-#else
-        retval = 0;
-#endif
 
         retval = usb_autopm_get_interface(intf);
         if (retval < 0)
@@ -463,6 +456,8 @@ static int usblp_release(struct inode *inode, struct file *file)
 {
         struct usblp *usblp = file->private_data;
 
+        usblp->flags &= ~LP_ABORT;
+
         mutex_lock (&usblp_mutex);
         usblp->used = 0;
         if (usblp->present) {
@@ -485,8 +480,8 @@ static unsigned int usblp_poll(struct file *file, struct poll_table_struct *wait
         poll_wait(file, &usblp->rwait, wait);
         poll_wait(file, &usblp->wwait, wait);
         spin_lock_irqsave(&usblp->lock, flags);
-        ret = ((!usblp->bidir || !usblp->rcomplete) ? 0 : POLLIN  | POLLRDNORM)
-                               | (!usblp->wcomplete ? 0 : POLLOUT | POLLWRNORM);
+        ret = ((usblp->bidir && usblp->rcomplete) ? POLLIN  | POLLRDNORM : 0) |
+           ((usblp->no_paper || usblp->wcomplete) ? POLLOUT | POLLWRNORM : 0);
         spin_unlock_irqrestore(&usblp->lock, flags);
         return ret;
 }
@@ -675,6 +670,13 @@ static long usblp_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
                                         retval = -EFAULT;
                                 break;
 
+                        case LPABORT:
+                                if (arg)
+                                        usblp->flags |= LP_ABORT;
+                                else
+                                        usblp->flags &= ~LP_ABORT;
+                                break;
+
                         default:
                                 retval = -ENOTTY;
                 }
@@ -684,10 +686,30 @@ done:
         return retval;
 }
 
+static struct urb *usblp_new_writeurb(struct usblp *usblp, int transfer_length)
+{
+        struct urb *urb;
+        char *writebuf;
+
+        if ((writebuf = kmalloc(transfer_length, GFP_KERNEL)) == NULL)
+                return NULL;
+        if ((urb = usb_alloc_urb(0, GFP_KERNEL)) == NULL) {
+                kfree(writebuf);
+                return NULL;
+        }
+
+        usb_fill_bulk_urb(urb, usblp->dev,
+                usb_sndbulkpipe(usblp->dev,
+                 usblp->protocol[usblp->current_protocol].epwrite->bEndpointAddress),
+                writebuf, transfer_length, usblp_bulk_write, usblp);
+        urb->transfer_flags |= URB_FREE_BUFFER;
+
+        return urb;
+}
+
 static ssize_t usblp_write(struct file *file, const char __user *buffer, size_t count, loff_t *ppos)
 {
         struct usblp *usblp = file->private_data;
-        char *writebuf;
         struct urb *writeurb;
         int rv;
         int transfer_length;
@@ -708,17 +730,11 @@ static ssize_t usblp_write(struct file *file, const char __user *buffer, size_t
                         transfer_length = USBLP_BUF_SIZE;
 
                 rv = -ENOMEM;
-                if ((writebuf = kmalloc(USBLP_BUF_SIZE, GFP_KERNEL)) == NULL)
-                        goto raise_buf;
-                if ((writeurb = usb_alloc_urb(0, GFP_KERNEL)) == NULL)
+                if ((writeurb = usblp_new_writeurb(usblp, transfer_length)) == NULL)
                         goto raise_urb;
-                usb_fill_bulk_urb(writeurb, usblp->dev,
-                        usb_sndbulkpipe(usblp->dev,
-                          usblp->protocol[usblp->current_protocol].epwrite->bEndpointAddress),
-                        writebuf, transfer_length, usblp_bulk_write, usblp);
                 usb_anchor_urb(writeurb, &usblp->urbs);
 
-                if (copy_from_user(writebuf,
+                if (copy_from_user(writeurb->transfer_buffer,
                                    buffer + writecount, transfer_length)) {
                         rv = -EFAULT;
                         goto raise_badaddr;
@@ -730,6 +746,7 @@ static ssize_t usblp_write(struct file *file, const char __user *buffer, size_t
                 if ((rv = usb_submit_urb(writeurb, GFP_KERNEL)) < 0) {
                         usblp->wstatus = 0;
                         spin_lock_irq(&usblp->lock);
+                        usblp->no_paper = 0;
                         usblp->wcomplete = 1;
                         wake_up(&usblp->wwait);
                         spin_unlock_irq(&usblp->lock);
@@ -747,12 +764,17 @@ static ssize_t usblp_write(struct file *file, const char __user *buffer, size_t
                                 /* Presume that it's going to complete well. */
                                 writecount += transfer_length;
                         }
+                        if (rv == -ENOSPC) {
+                                spin_lock_irq(&usblp->lock);
+                                usblp->no_paper = 1;    /* Mark for poll(2) */
+                                spin_unlock_irq(&usblp->lock);
+                                writecount += transfer_length;
+                        }
                         /* Leave URB dangling, to be cleaned on close. */
                         goto collect_error;
                 }
 
                 if (usblp->wstatus < 0) {
-                        usblp_check_status(usblp, 0);
                         rv = -EIO;
                         goto collect_error;
                 }
@@ -771,8 +793,6 @@ raise_badaddr:
         usb_unanchor_urb(writeurb);
         usb_free_urb(writeurb);
 raise_urb:
-        kfree(writebuf);
-raise_buf:
 raise_wait:
 collect_error:          /* Out of raise sequence */
         mutex_unlock(&usblp->wmut);
@@ -838,32 +858,36 @@ done:
  * when O_NONBLOCK is set. So, applications setting O_NONBLOCK must use
  * select(2) or poll(2) to wait for the buffer to drain before closing.
  * Alternatively, set blocking mode with fcntl and issue a zero-size write.
- *
- * Old v0.13 code had a non-functional timeout for wait_event(). Someone forgot
- * to check the return code for timeout expiration, so it had no effect.
- * Apparently, it was intended to check for error conditons, such as out
- * of paper. It is going to return when we settle things with CUPS. XXX
  */
 static int usblp_wwait(struct usblp *usblp, int nonblock)
 {
         DECLARE_WAITQUEUE(waita, current);
         int rc;
+        int err = 0;
 
         add_wait_queue(&usblp->wwait, &waita);
         for (;;) {
+                set_current_state(TASK_INTERRUPTIBLE);
                 if (mutex_lock_interruptible(&usblp->mut)) {
                         rc = -EINTR;
                         break;
                 }
-                set_current_state(TASK_INTERRUPTIBLE);
-                if ((rc = usblp_wtest(usblp, nonblock)) < 0) {
-                        mutex_unlock(&usblp->mut);
-                        break;
-                }
+                rc = usblp_wtest(usblp, nonblock);
                 mutex_unlock(&usblp->mut);
-                if (rc == 0)
+                if (rc <= 0)
                         break;
-                schedule();
+
+                if (usblp->flags & LP_ABORT) {
+                        if (schedule_timeout(msecs_to_jiffies(5000)) == 0) {
+                                err = usblp_check_status(usblp, err);
+                                if (err == 1) { /* Paper out */
+                                        rc = -ENOSPC;
+                                        break;
+                                }
+                        }
+                } else {
+                        schedule();
+                }
         }
         set_current_state(TASK_RUNNING);
         remove_wait_queue(&usblp->wwait, &waita);
diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c
index cb69aa1e02e8..1a8edcee7f30 100644
--- a/drivers/usb/core/config.c
+++ b/drivers/usb/core/config.c
@@ -507,18 +507,30 @@ void usb_destroy_configuration(struct usb_device *dev)
 }
 
 
-// hub-only!! ... and only in reset path, or usb_new_device()
-// (used by real hubs and virtual root hubs)
+/*
+ * Get the USB config descriptors, cache and parse'em
+ *
+ * hub-only!! ... and only in reset path, or usb_new_device()
+ * (used by real hubs and virtual root hubs)
+ *
+ * NOTE: if this is a WUSB device and is not authorized, we skip the
+ *       whole thing. A non-authorized USB device has no
+ *       configurations.
+ */
 int usb_get_configuration(struct usb_device *dev)
 {
         struct device *ddev = &dev->dev;
         int ncfg = dev->descriptor.bNumConfigurations;
-        int result = -ENOMEM;
+        int result = 0;
         unsigned int cfgno, length;
         unsigned char *buffer;
         unsigned char *bigbuffer;
         struct usb_config_descriptor *desc;
 
+        cfgno = 0;
+        if (dev->authorized == 0)       /* Not really an error */
+                goto out_not_authorized;
+        result = -ENOMEM;
         if (ncfg > USB_MAXCONFIG) {
                 dev_warn(ddev, "too many configurations: %d, "
                     "using maximum allowed: %d\n", ncfg, USB_MAXCONFIG);
@@ -545,14 +557,15 @@ int usb_get_configuration(struct usb_device *dev)
                 goto err2;
         desc = (struct usb_config_descriptor *)buffer;
 
-        for (cfgno = 0; cfgno < ncfg; cfgno++) {
+        result = 0;
+        for (; cfgno < ncfg; cfgno++) {
                 /* We grab just the first descriptor so we know how long
                  * the whole configuration is */
                 result = usb_get_descriptor(dev, USB_DT_CONFIG, cfgno,
                     buffer, USB_DT_CONFIG_SIZE);
                 if (result < 0) {
                         dev_err(ddev, "unable to read config index %d "
-                            "descriptor/%s\n", cfgno, "start");
+                            "descriptor/%s: %d\n", cfgno, "start", result);
                         dev_err(ddev, "chopping to %d config(s)\n", cfgno);
                         dev->descriptor.bNumConfigurations = cfgno;
                         break;
@@ -599,6 +612,7 @@ int usb_get_configuration(struct usb_device *dev)
 
 err:
         kfree(buffer);
+out_not_authorized:
         dev->descriptor.bNumConfigurations = cfgno;
 err2:
         if (result == -ENOMEM)
diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c
index 927a181120a9..f013b4012c9a 100644
--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -71,6 +71,7 @@ struct async {
         void __user *userbuffer;
         void __user *userurb;
         struct urb *urb;
+        int status;
         u32 secid;
 };
 
@@ -289,10 +290,8 @@ static void snoop_urb(struct urb *urb, void __user *userurb)
         if (!usbfs_snoop)
                 return;
 
-        if (urb->pipe & USB_DIR_IN)
-                dev_info(&urb->dev->dev, "direction=IN\n");
-        else
-                dev_info(&urb->dev->dev, "direction=OUT\n");
+        dev_info(&urb->dev->dev, "direction=%s\n",
+                        usb_urb_dir_in(urb) ? "IN" : "OUT");
         dev_info(&urb->dev->dev, "userurb=%p\n", userurb);
         dev_info(&urb->dev->dev, "transfer_buffer_length=%d\n",
                  urb->transfer_buffer_length);
@@ -312,9 +311,10 @@ static void async_completed(struct urb *urb)
         spin_lock(&ps->lock);
         list_move_tail(&as->asynclist, &ps->async_completed);
         spin_unlock(&ps->lock);
+        as->status = urb->status;
         if (as->signr) {
                 sinfo.si_signo = as->signr;
-                sinfo.si_errno = as->urb->status;
+                sinfo.si_errno = as->status;
                 sinfo.si_code = SI_ASYNCIO;
                 sinfo.si_addr = as->userurb;
                 kill_pid_info_as_uid(as->signr, &sinfo, as->pid, as->uid,
@@ -910,6 +910,7 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb,
         struct usb_ctrlrequest *dr = NULL;
         unsigned int u, totlen, isofrmlen;
         int ret, ifnum = -1;
+        int is_in;
 
         if (uurb->flags & ~(USBDEVFS_URB_ISO_ASAP|USBDEVFS_URB_SHORT_NOT_OK|
                            URB_NO_FSBR|URB_ZERO_PACKET))
@@ -924,16 +925,18 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb,
                 if ((ret = checkintf(ps, ifnum)))
                         return ret;
         }
-        if ((uurb->endpoint & USB_ENDPOINT_DIR_MASK) != 0)
-                ep = ps->dev->ep_in [uurb->endpoint & USB_ENDPOINT_NUMBER_MASK];
-        else
-                ep = ps->dev->ep_out [uurb->endpoint & USB_ENDPOINT_NUMBER_MASK];
+        if ((uurb->endpoint & USB_ENDPOINT_DIR_MASK) != 0) {
+                is_in = 1;
+                ep = ps->dev->ep_in[uurb->endpoint & USB_ENDPOINT_NUMBER_MASK];
+        } else {
+                is_in = 0;
+                ep = ps->dev->ep_out[uurb->endpoint & USB_ENDPOINT_NUMBER_MASK];
+        }
         if (!ep)
                 return -ENOENT;
         switch(uurb->type) {
         case USBDEVFS_URB_TYPE_CONTROL:
-                if ((ep->desc.bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
-                                != USB_ENDPOINT_XFER_CONTROL)
+                if (!usb_endpoint_xfer_control(&ep->desc))
                         return -EINVAL;
                 /* min 8 byte setup packet, max 8 byte setup plus an arbitrary data stage */
                 if (uurb->buffer_length < 8 || uurb->buffer_length > (8 + MAX_USBFS_BUFFER_SIZE))
@@ -952,23 +955,32 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb,
                         kfree(dr);
                         return ret;
                 }
-                uurb->endpoint = (uurb->endpoint & ~USB_ENDPOINT_DIR_MASK) | (dr->bRequestType & USB_ENDPOINT_DIR_MASK);
                 uurb->number_of_packets = 0;
                 uurb->buffer_length = le16_to_cpup(&dr->wLength);
                 uurb->buffer += 8;
-                if (!access_ok((uurb->endpoint & USB_DIR_IN) ?  VERIFY_WRITE : VERIFY_READ, uurb->buffer, uurb->buffer_length)) {
+                if ((dr->bRequestType & USB_DIR_IN) && uurb->buffer_length) {
+                        is_in = 1;
+                        uurb->endpoint |= USB_DIR_IN;
+                } else {
+                        is_in = 0;
+                        uurb->endpoint &= ~USB_DIR_IN;
+                }
+                if (!access_ok(is_in ? VERIFY_WRITE : VERIFY_READ,
+                                uurb->buffer, uurb->buffer_length)) {
                         kfree(dr);
                         return -EFAULT;
                 }
                 snoop(&ps->dev->dev, "control urb: bRequest=%02x "
                         "bRrequestType=%02x wValue=%04x "
                         "wIndex=%04x wLength=%04x\n",
-                        dr->bRequest, dr->bRequestType, dr->wValue,
-                        dr->wIndex, dr->wLength);
+                        dr->bRequest, dr->bRequestType,
+                        __le16_to_cpup(&dr->wValue),
+                        __le16_to_cpup(&dr->wIndex),
+                        __le16_to_cpup(&dr->wLength));
                 break;
 
         case USBDEVFS_URB_TYPE_BULK:
-                switch (ep->desc.bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
+                switch (usb_endpoint_type(&ep->desc)) {
                 case USB_ENDPOINT_XFER_CONTROL:
                 case USB_ENDPOINT_XFER_ISOC:
                         return -EINVAL;
@@ -977,7 +989,8 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb,
                 uurb->number_of_packets = 0;
                 if (uurb->buffer_length > MAX_USBFS_BUFFER_SIZE)
                         return -EINVAL;
-                if (!access_ok((uurb->endpoint & USB_DIR_IN) ? VERIFY_WRITE : VERIFY_READ, uurb->buffer, uurb->buffer_length))
+                if (!access_ok(is_in ? VERIFY_WRITE : VERIFY_READ,
+                                uurb->buffer, uurb->buffer_length))
                         return -EFAULT;
                 snoop(&ps->dev->dev, "bulk urb\n");
                 break;
@@ -986,8 +999,7 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb,
                 /* arbitrary limit */
                 if (uurb->number_of_packets < 1 || uurb->number_of_packets > 128)
                         return -EINVAL;
-                if ((ep->desc.bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
-                                != USB_ENDPOINT_XFER_ISOC)
+                if (!usb_endpoint_xfer_isoc(&ep->desc))
                         return -EINVAL;
                 isofrmlen = sizeof(struct usbdevfs_iso_packet_desc) * uurb->number_of_packets;
                 if (!(isopkt = kmalloc(isofrmlen, GFP_KERNEL)))
@@ -1014,12 +1026,12 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb,
 
         case USBDEVFS_URB_TYPE_INTERRUPT:
                 uurb->number_of_packets = 0;
-                if ((ep->desc.bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
-                                != USB_ENDPOINT_XFER_INT)
+                if (!usb_endpoint_xfer_int(&ep->desc))
                         return -EINVAL;
                 if (uurb->buffer_length > MAX_USBFS_BUFFER_SIZE)
                         return -EINVAL;
-                if (!access_ok((uurb->endpoint & USB_DIR_IN) ? VERIFY_WRITE : VERIFY_READ, uurb->buffer, uurb->buffer_length))
+                if (!access_ok(is_in ? VERIFY_WRITE : VERIFY_READ,
+                                uurb->buffer, uurb->buffer_length))
                         return -EFAULT;
                 snoop(&ps->dev->dev, "interrupt urb\n");
                 break;
@@ -1039,8 +1051,11 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb,
                 return -ENOMEM;
         }
         as->urb->dev = ps->dev;
-        as->urb->pipe = (uurb->type << 30) | __create_pipe(ps->dev, uurb->endpoint & 0xf) | (uurb->endpoint & USB_DIR_IN);
-        as->urb->transfer_flags = uurb->flags;
+        as->urb->pipe = (uurb->type << 30) |
+                        __create_pipe(ps->dev, uurb->endpoint & 0xf) |
+                        (uurb->endpoint & USB_DIR_IN);
+        as->urb->transfer_flags = uurb->flags |
+                        (is_in ? URB_DIR_IN : URB_DIR_OUT);
         as->urb->transfer_buffer_length = uurb->buffer_length;
         as->urb->setup_packet = (unsigned char*)dr;
         as->urb->start_frame = uurb->start_frame;
@@ -1070,13 +1085,13 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb,
         as->uid = current->uid;
         as->euid = current->euid;
         security_task_getsecid(current, &as->secid);
-        if (!(uurb->endpoint & USB_DIR_IN)) {
-                if (copy_from_user(as->urb->transfer_buffer, uurb->buffer, as->urb->transfer_buffer_length)) {
+        if (!is_in) {
+                if (copy_from_user(as->urb->transfer_buffer, uurb->buffer,
+                                as->urb->transfer_buffer_length)) {
                         free_async(as);
                         return -EFAULT;
                 }
         }
-        snoop(&as->urb->dev->dev, "submit urb\n");
         snoop_urb(as->urb, as->userurb);
         async_newpending(as);
         if ((ret = usb_submit_urb(as->urb, GFP_KERNEL))) {
@@ -1119,14 +1134,14 @@ static int processcompl(struct async *as, void __user * __user *arg)
         if (as->userbuffer)
                 if (copy_to_user(as->userbuffer, urb->transfer_buffer, urb->transfer_buffer_length))
                         return -EFAULT;
-        if (put_user(urb->status, &userurb->status))
+        if (put_user(as->status, &userurb->status))
                 return -EFAULT;
         if (put_user(urb->actual_length, &userurb->actual_length))
                 return -EFAULT;
         if (put_user(urb->error_count, &userurb->error_count))
                 return -EFAULT;
 
-        if (usb_pipeisoc(urb->pipe)) {
+        if (usb_endpoint_xfer_isoc(&urb->ep->desc)) {
                 for (i = 0; i < urb->number_of_packets; i++) {
                         if (put_user(urb->iso_frame_desc[i].actual_length,
                                      &userurb->iso_frame_desc[i].actual_length))
@@ -1233,14 +1248,14 @@ static int processcompl_compat(struct async *as, void __user * __user *arg)
         if (as->userbuffer)
                 if (copy_to_user(as->userbuffer, urb->transfer_buffer, urb->transfer_buffer_length))
                         return -EFAULT;
-        if (put_user(urb->status, &userurb->status))
+        if (put_user(as->status, &userurb->status))
                 return -EFAULT;
         if (put_user(urb->actual_length, &userurb->actual_length))
                 return -EFAULT;
         if (put_user(urb->error_count, &userurb->error_count))
                 return -EFAULT;
 
-        if (usb_pipeisoc(urb->pipe)) {
+        if (usb_endpoint_xfer_isoc(&urb->ep->desc)) {
                 for (i = 0; i < urb->number_of_packets; i++) {
                         if (put_user(urb->iso_frame_desc[i].actual_length,
                                      &userurb->iso_frame_desc[i].actual_length))
@@ -1576,6 +1591,7 @@ static unsigned int usbdev_poll(struct file *file, struct poll_table_struct *wai
 }
 
 const struct file_operations usbdev_file_operations = {
+        .owner =        THIS_MODULE,
         .llseek =       usbdev_lseek,
         .read =         usbdev_read,
         .poll =         usbdev_poll,
@@ -1625,10 +1641,7 @@ static struct notifier_block usbdev_nb = {
 };
 #endif
 
-static struct cdev usb_device_cdev = {
-        .kobj   = {.name = "usb_device", },
-        .owner  = THIS_MODULE,
-};
+static struct cdev usb_device_cdev;
 
 int __init usb_devio_init(void)
 {
diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index 654857493a82..8586817698ad 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -60,7 +60,7 @@ ssize_t usb_store_new_id(struct usb_dynids *dynids,
         dynid->id.match_flags = USB_DEVICE_ID_MATCH_DEVICE;
 
         spin_lock(&dynids->lock);
-        list_add_tail(&dynids->list, &dynid->node);
+        list_add_tail(&dynid->node, &dynids->list);
         spin_unlock(&dynids->lock);
 
         if (get_driver(driver)) {
@@ -202,6 +202,11 @@ static int usb_probe_interface(struct device *dev)
         intf = to_usb_interface(dev);
         udev = interface_to_usbdev(intf);
 
+        if (udev->authorized == 0) {
+                dev_err(&intf->dev, "Device is not authorized for usage\n");
+                return -ENODEV;
+        }
+
         id = usb_match_id(intf, driver->id_table);
         if (!id)
                 id = usb_match_dynamic_id(intf, driver);
@@ -576,12 +581,9 @@ static int usb_device_match(struct device *dev, struct device_driver *drv)
 }
 
 #ifdef  CONFIG_HOTPLUG
-static int usb_uevent(struct device *dev, char **envp, int num_envp,
-                      char *buffer, int buffer_size)
+static int usb_uevent(struct device *dev, struct kobj_uevent_env *env)
 {
         struct usb_device *usb_dev;
-        int i = 0;
-        int length = 0;
 
         if (!dev)
                 return -ENODEV;
@@ -610,51 +612,39 @@ static int usb_uevent(struct device *dev, char **envp, int num_envp,
          * all the device descriptors we don't tell them about.  Or
          * act as usermode drivers.
          */
-        if (add_uevent_var(envp, num_envp, &i,
-                           buffer, buffer_size, &length,
-                           "DEVICE=/proc/bus/usb/%03d/%03d",
+        if (add_uevent_var(env, "DEVICE=/proc/bus/usb/%03d/%03d",
                            usb_dev->bus->busnum, usb_dev->devnum))
                 return -ENOMEM;
 #endif
 
         /* per-device configurations are common */
-        if (add_uevent_var(envp, num_envp, &i,
-                           buffer, buffer_size, &length,
-                           "PRODUCT=%x/%x/%x",
+        if (add_uevent_var(env, "PRODUCT=%x/%x/%x",
                            le16_to_cpu(usb_dev->descriptor.idVendor),
                            le16_to_cpu(usb_dev->descriptor.idProduct),
                            le16_to_cpu(usb_dev->descriptor.bcdDevice)))
                 return -ENOMEM;
 
         /* class-based driver binding models */
-        if (add_uevent_var(envp, num_envp, &i,
-                           buffer, buffer_size, &length,
-                           "TYPE=%d/%d/%d",
+        if (add_uevent_var(env, "TYPE=%d/%d/%d",
                            usb_dev->descriptor.bDeviceClass,
                            usb_dev->descriptor.bDeviceSubClass,
                            usb_dev->descriptor.bDeviceProtocol))
                 return -ENOMEM;
 
-        if (add_uevent_var(envp, num_envp, &i,
-                           buffer, buffer_size, &length,
-                           "BUSNUM=%03d",
+        if (add_uevent_var(env, "BUSNUM=%03d",
                            usb_dev->bus->busnum))
                 return -ENOMEM;
 
-        if (add_uevent_var(envp, num_envp, &i,
-                           buffer, buffer_size, &length,
-                           "DEVNUM=%03d",
+        if (add_uevent_var(env, "DEVNUM=%03d",
                            usb_dev->devnum))
                 return -ENOMEM;
 
-        envp[i] = NULL;
         return 0;
 }
 
 #else
 
-static int usb_uevent(struct device *dev, char **envp,
-                      int num_envp, char *buffer, int buffer_size)
+static int usb_uevent(struct device *dev, struct kobj_uevent_env *env)
 {
         return -ENODEV;
 }
@@ -945,11 +935,11 @@ done:
 #ifdef  CONFIG_USB_SUSPEND
 
 /* Internal routine to check whether we may autosuspend a device. */
-static int autosuspend_check(struct usb_device *udev)
+static int autosuspend_check(struct usb_device *udev, int reschedule)
 {
         int                     i;
         struct usb_interface    *intf;
-        unsigned long           suspend_time;
+        unsigned long           suspend_time, j;
 
         /* For autosuspend, fail fast if anything is in use or autosuspend
          * is disabled.  Also fail if any interfaces require remote wakeup
@@ -991,20 +981,20 @@ static int autosuspend_check(struct usb_device *udev)
         }
 
         /* If everything is okay but the device hasn't been idle for long
-         * enough, queue a delayed autosuspend request.
+         * enough, queue a delayed autosuspend request.  If the device
+         * _has_ been idle for long enough and the reschedule flag is set,
+         * likewise queue a delayed (1 second) autosuspend request.
          */
-        if (time_after(suspend_time, jiffies)) {
+        j = jiffies;
+        if (time_before(j, suspend_time))
+                reschedule = 1;
+        else
+                suspend_time = j + HZ;
+        if (reschedule) {
                 if (!timer_pending(&udev->autosuspend.timer)) {
-
-                        /* The value of jiffies may change between the
-                         * time_after() comparison above and the subtraction
-                         * below.  That's okay; the system behaves sanely
-                         * when a timer is registered for the present moment
-                         * or for the past.
-                         */
                         queue_delayed_work(ksuspend_usb_wq, &udev->autosuspend,
-                                round_jiffies_relative(suspend_time - jiffies));
-                        }
+                                round_jiffies_relative(suspend_time - j));
+                }
                 return -EAGAIN;
         }
         return 0;
@@ -1012,7 +1002,7 @@ static int autosuspend_check(struct usb_device *udev)
 
 #else
 
-static inline int autosuspend_check(struct usb_device *udev)
+static inline int autosuspend_check(struct usb_device *udev, int reschedule)
 {
         return 0;
 }
@@ -1069,7 +1059,7 @@ static int usb_suspend_both(struct usb_device *udev, pm_message_t msg)
         udev->do_remote_wakeup = device_may_wakeup(&udev->dev);
 
         if (udev->auto_pm) {
-                status = autosuspend_check(udev);
+                status = autosuspend_check(udev, 0);
                 if (status < 0)
                         goto done;
         }
@@ -1083,15 +1073,8 @@ static int usb_suspend_both(struct usb_device *udev, pm_message_t msg)
                                 break;
                 }
         }
-        if (status == 0) {
-
-                /* Non-root devices don't need to do anything for FREEZE
-                 * or PRETHAW. */
-                if (udev->parent && (msg.event == PM_EVENT_FREEZE ||
-                                msg.event == PM_EVENT_PRETHAW))
-                        goto done;
+        if (status == 0)
                 status = usb_suspend_device(udev, msg);
-        }
 
         /* If the suspend failed, resume interfaces that did get suspended */
         if (status != 0) {
@@ -1102,12 +1085,24 @@ static int usb_suspend_both(struct usb_device *udev, pm_message_t msg)
 
                 /* Try another autosuspend when the interfaces aren't busy */
                 if (udev->auto_pm)
-                        autosuspend_check(udev);
+                        autosuspend_check(udev, status == -EBUSY);
 
-        /* If the suspend succeeded, propagate it up the tree */
+        /* If the suspend succeeded then prevent any more URB submissions,
+         * flush any outstanding URBs, and propagate the suspend up the tree.
+         */
         } else {
                 cancel_delayed_work(&udev->autosuspend);
-                if (parent)
+                udev->can_submit = 0;
+                for (i = 0; i < 16; ++i) {
+                        usb_hcd_flush_endpoint(udev, udev->ep_out[i]);
+                        usb_hcd_flush_endpoint(udev, udev->ep_in[i]);
+                }
+
+                /* If this is just a FREEZE or a PRETHAW, udev might
+                 * not really be suspended.  Only true suspends get
+                 * propagated up the device tree.
+                 */
+                if (parent && udev->state == USB_STATE_SUSPENDED)
                         usb_autosuspend_device(parent);
         }
 
@@ -1156,6 +1151,7 @@ static int usb_resume_both(struct usb_device *udev)
                 status = -ENODEV;
                 goto done;
         }
+        udev->can_submit = 1;
 
         /* Propagate the resume up the tree, if necessary */
         if (udev->state == USB_STATE_SUSPENDED) {
@@ -1224,6 +1220,8 @@ static int usb_autopm_do_device(struct usb_device *udev, int inc_usage_cnt)
         udev->auto_pm = 1;
         udev->pm_usage_cnt += inc_usage_cnt;
         WARN_ON(udev->pm_usage_cnt < 0);
+        if (inc_usage_cnt)
+                udev->last_busy = jiffies;
         if (inc_usage_cnt >= 0 && udev->pm_usage_cnt > 0) {
                 if (udev->state == USB_STATE_SUSPENDED)
                         status = usb_resume_both(udev);
@@ -1232,8 +1230,6 @@ static int usb_autopm_do_device(struct usb_device *udev, int inc_usage_cnt)
                 else if (inc_usage_cnt)
                         udev->last_busy = jiffies;
         } else if (inc_usage_cnt <= 0 && udev->pm_usage_cnt <= 0) {
-                if (inc_usage_cnt)
-                        udev->last_busy = jiffies;
                 status = usb_suspend_both(udev, PMSG_SUSPEND);
         }
         usb_pm_unlock(udev);
@@ -1342,16 +1338,15 @@ static int usb_autopm_do_interface(struct usb_interface *intf,
         else {
                 udev->auto_pm = 1;
                 intf->pm_usage_cnt += inc_usage_cnt;
+                udev->last_busy = jiffies;
                 if (inc_usage_cnt >= 0 && intf->pm_usage_cnt > 0) {
                         if (udev->state == USB_STATE_SUSPENDED)
                                 status = usb_resume_both(udev);
                         if (status != 0)
                                 intf->pm_usage_cnt -= inc_usage_cnt;
-                        else if (inc_usage_cnt)
+                        else
                                 udev->last_busy = jiffies;
                 } else if (inc_usage_cnt <= 0 && intf->pm_usage_cnt <= 0) {
-                        if (inc_usage_cnt)
-                                udev->last_busy = jiffies;
                         status = usb_suspend_both(udev, PMSG_SUSPEND);
                 }
         }
@@ -1530,9 +1525,21 @@ int usb_external_resume_device(struct usb_device *udev)
 
 static int usb_suspend(struct device *dev, pm_message_t message)
 {
+        struct usb_device       *udev;
+
         if (!is_usb_device(dev))        /* Ignore PM for interfaces */
                 return 0;
-        return usb_external_suspend_device(to_usb_device(dev), message);
+        udev = to_usb_device(dev);
+
+        /* If udev is already suspended, we can skip this suspend and
+         * we should also skip the upcoming system resume. */
+        if (udev->state == USB_STATE_SUSPENDED) {
+                udev->skip_sys_resume = 1;
+                return 0;
+        }
+
+        udev->skip_sys_resume = 0;
+        return usb_external_suspend_device(udev, message);
 }
 
 static int usb_resume(struct device *dev)
@@ -1543,13 +1550,14 @@ static int usb_resume(struct device *dev)
                 return 0;
         udev = to_usb_device(dev);
 
-        /* If autoresume is disabled then we also want to prevent resume
-         * during system wakeup.  However, a "persistent-device" reset-resume
-         * after power loss counts as a wakeup event.  So allow a
-         * reset-resume to occur if remote wakeup is enabled. */
-        if (udev->autoresume_disabled) {
+        /* If udev->skip_sys_resume is set then udev was already suspended
+         * when the system suspend started, so we don't want to resume
+         * udev during this system wakeup.  However a reset-resume counts
+         * as a wakeup event, so allow a reset-resume to occur if remote
+         * wakeup is enabled. */
+        if (udev->skip_sys_resume) {
                 if (!(udev->reset_resume && udev->do_remote_wakeup))
-                        return -EPERM;
+                        return -EHOSTUNREACH;
         }
         return usb_external_resume_device(udev);
 }
diff --git a/drivers/usb/core/endpoint.c b/drivers/usb/core/endpoint.c
index e0ec7045e865..7dc123d6b2d0 100644
--- a/drivers/usb/core/endpoint.c
+++ b/drivers/usb/core/endpoint.c
@@ -267,7 +267,6 @@ static void ep_device_release(struct device *dev)
 {
         struct ep_device *ep_dev = to_ep_device(dev);
 
-        dev_dbg(dev, "%s called for %s\n", __FUNCTION__, dev->bus_id);
         endpoint_free_minor(ep_dev);
         kfree(ep_dev);
 }
diff --git a/drivers/usb/core/generic.c b/drivers/usb/core/generic.c
index b2fc2b115256..c1cb94e9f242 100644
--- a/drivers/usb/core/generic.c
+++ b/drivers/usb/core/generic.c
@@ -40,7 +40,7 @@ static int is_activesync(struct usb_interface_descriptor *desc)
                 && desc->bInterfaceProtocol == 1;
 }
 
-static int choose_configuration(struct usb_device *udev)
+int usb_choose_configuration(struct usb_device *udev)
 {
         int i;
         int num_configs;
@@ -161,17 +161,20 @@ static int generic_probe(struct usb_device *udev)
         /* Choose and set the configuration.  This registers the interfaces
          * with the driver core and lets interface drivers bind to them.
          */
-        c = choose_configuration(udev);
-        if (c >= 0) {
-                err = usb_set_configuration(udev, c);
-                if (err) {
-                        dev_err(&udev->dev, "can't set config #%d, error %d\n",
+        if (udev->authorized == 0)
+                dev_err(&udev->dev, "Device is not authorized for usage\n");
+        else {
+                c = usb_choose_configuration(udev);
+                if (c >= 0) {
+                        err = usb_set_configuration(udev, c);
+                        if (err) {
+                                dev_err(&udev->dev, "can't set config #%d, error %d\n",
                                         c, err);
-                        /* This need not be fatal.  The user can try to
-                         * set other configurations. */
+                                /* This need not be fatal.  The user can try to
+                                 * set other configurations. */
+                        }
                 }
         }
-
         /* USB device state == configured ... usable */
         usb_notify_add_device(udev);
 
@@ -203,8 +206,13 @@ static int generic_suspend(struct usb_device *udev, pm_message_t msg)
          */
         if (!udev->parent)
                 rc = hcd_bus_suspend(udev);
+
+        /* Non-root devices don't need to do anything for FREEZE or PRETHAW */
+        else if (msg.event == PM_EVENT_FREEZE || msg.event == PM_EVENT_PRETHAW)
+                rc = 0;
         else
                 rc = usb_port_suspend(udev);
+
         return rc;
 }
 
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 42ef1d5f6c8a..3dd997df8505 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -356,10 +356,18 @@ static int rh_call_control (struct usb_hcd *hcd, struct urb *urb)
         const u8        *bufp = tbuf;
         int             len = 0;
         int             patch_wakeup = 0;
-        unsigned long   flags;
-        int             status = 0;
+        int             status;
         int             n;
 
+        might_sleep();
+
+        spin_lock_irq(&hcd_root_hub_lock);
+        status = usb_hcd_link_urb_to_ep(hcd, urb);
+        spin_unlock_irq(&hcd_root_hub_lock);
+        if (status)
+                return status;
+        urb->hcpriv = hcd;      /* Indicate it's queued */
+
         cmd = (struct usb_ctrlrequest *) urb->setup_packet;
         typeReq  = (cmd->bRequestType << 8) | cmd->bRequest;
         wValue   = le16_to_cpu (cmd->wValue);
@@ -523,13 +531,18 @@ error:
         }
 
         /* any errors get returned through the urb completion */
-        local_irq_save (flags);
-        spin_lock (&urb->lock);
-        if (urb->status == -EINPROGRESS)
-                urb->status = status;
-        spin_unlock (&urb->lock);
-        usb_hcd_giveback_urb (hcd, urb);
-        local_irq_restore (flags);
+        spin_lock_irq(&hcd_root_hub_lock);
+        usb_hcd_unlink_urb_from_ep(hcd, urb);
+
+        /* This peculiar use of spinlocks echoes what real HC drivers do.
+         * Avoiding calls to local_irq_disable/enable makes the code
+         * RT-friendly.
+         */
+        spin_unlock(&hcd_root_hub_lock);
+        usb_hcd_giveback_urb(hcd, urb, status);
+        spin_lock(&hcd_root_hub_lock);
+
+        spin_unlock_irq(&hcd_root_hub_lock);
         return 0;
 }
 
@@ -559,31 +572,23 @@ void usb_hcd_poll_rh_status(struct usb_hcd *hcd)
         if (length > 0) {
 
                 /* try to complete the status urb */
-                local_irq_save (flags);
-                spin_lock(&hcd_root_hub_lock);
+                spin_lock_irqsave(&hcd_root_hub_lock, flags);
                 urb = hcd->status_urb;
                 if (urb) {
-                        spin_lock(&urb->lock);
-                        if (urb->status == -EINPROGRESS) {
-                                hcd->poll_pending = 0;
-                                hcd->status_urb = NULL;
-                                urb->status = 0;
-                                urb->hcpriv = NULL;
-                                urb->actual_length = length;
-                                memcpy(urb->transfer_buffer, buffer, length);
-                        } else          /* urb has been unlinked */
-                                length = 0;
-                        spin_unlock(&urb->lock);
-                } else
-                        length = 0;
-                spin_unlock(&hcd_root_hub_lock);
+                        hcd->poll_pending = 0;
+                        hcd->status_urb = NULL;
+                        urb->actual_length = length;
+                        memcpy(urb->transfer_buffer, buffer, length);
 
-                /* local irqs are always blocked in completions */
-                if (length > 0)
-                        usb_hcd_giveback_urb (hcd, urb);
-                else
+                        usb_hcd_unlink_urb_from_ep(hcd, urb);
+                        spin_unlock(&hcd_root_hub_lock);
+                        usb_hcd_giveback_urb(hcd, urb, 0);
+                        spin_lock(&hcd_root_hub_lock);
+                } else {
+                        length = 0;
                         hcd->poll_pending = 1;
-                local_irq_restore (flags);
+                }
+                spin_unlock_irqrestore(&hcd_root_hub_lock, flags);
         }
 
         /* The USB 2.0 spec says 256 ms.  This is close enough and won't
@@ -611,33 +616,35 @@ static int rh_queue_status (struct usb_hcd *hcd, struct urb *urb)
         int             len = 1 + (urb->dev->maxchild / 8);
 
         spin_lock_irqsave (&hcd_root_hub_lock, flags);
-        if (urb->status != -EINPROGRESS)        /* already unlinked */
-                retval = urb->status;
-        else if (hcd->status_urb || urb->transfer_buffer_length < len) {
+        if (hcd->status_urb || urb->transfer_buffer_length < len) {
                 dev_dbg (hcd->self.controller, "not queuing rh status urb\n");
                 retval = -EINVAL;
-        } else {
-                hcd->status_urb = urb;
-                urb->hcpriv = hcd;      /* indicate it's queued */
+                goto done;
+        }
 
-                if (!hcd->uses_new_polling)
-                        mod_timer (&hcd->rh_timer,
-                                (jiffies/(HZ/4) + 1) * (HZ/4));
+        retval = usb_hcd_link_urb_to_ep(hcd, urb);
+        if (retval)
+                goto done;
 
-                /* If a status change has already occurred, report it ASAP */
-                else if (hcd->poll_pending)
-                        mod_timer (&hcd->rh_timer, jiffies);
-                retval = 0;
-        }
+        hcd->status_urb = urb;
+        urb->hcpriv = hcd;      /* indicate it's queued */
+        if (!hcd->uses_new_polling)
+                mod_timer(&hcd->rh_timer, (jiffies/(HZ/4) + 1) * (HZ/4));
+
+        /* If a status change has already occurred, report it ASAP */
+        else if (hcd->poll_pending)
+                mod_timer(&hcd->rh_timer, jiffies);
+        retval = 0;
+ done:
         spin_unlock_irqrestore (&hcd_root_hub_lock, flags);
         return retval;
 }
 
 static int rh_urb_enqueue (struct usb_hcd *hcd, struct urb *urb)
 {
-        if (usb_pipeint (urb->pipe))
+        if (usb_endpoint_xfer_int(&urb->ep->desc))
                 return rh_queue_status (hcd, urb);
-        if (usb_pipecontrol (urb->pipe))
+        if (usb_endpoint_xfer_control(&urb->ep->desc))
                 return rh_call_control (hcd, urb);
         return -EINVAL;
 }
@@ -647,32 +654,96 @@ static int rh_urb_enqueue (struct usb_hcd *hcd, struct urb *urb)
 /* Unlinks of root-hub control URBs are legal, but they don't do anything
  * since these URBs always execute synchronously.
  */
-static int usb_rh_urb_dequeue (struct usb_hcd *hcd, struct urb *urb)
+static int usb_rh_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
 {
         unsigned long   flags;
+        int             rc;
+
+        spin_lock_irqsave(&hcd_root_hub_lock, flags);
+        rc = usb_hcd_check_unlink_urb(hcd, urb, status);
+        if (rc)
+                goto done;
 
-        if (usb_pipeendpoint(urb->pipe) == 0) { /* Control URB */
+        if (usb_endpoint_num(&urb->ep->desc) == 0) {    /* Control URB */
                 ;       /* Do nothing */
 
         } else {                                /* Status URB */
                 if (!hcd->uses_new_polling)
                         del_timer (&hcd->rh_timer);
-                local_irq_save (flags);
-                spin_lock (&hcd_root_hub_lock);
                 if (urb == hcd->status_urb) {
                         hcd->status_urb = NULL;
-                        urb->hcpriv = NULL;
-                } else
-                        urb = NULL;             /* wasn't fully queued */
-                spin_unlock (&hcd_root_hub_lock);
-                if (urb)
-                        usb_hcd_giveback_urb (hcd, urb);
-                local_irq_restore (flags);
+                        usb_hcd_unlink_urb_from_ep(hcd, urb);
+
+                        spin_unlock(&hcd_root_hub_lock);
+                        usb_hcd_giveback_urb(hcd, urb, status);
+                        spin_lock(&hcd_root_hub_lock);
+                }
         }
+ done:
+        spin_unlock_irqrestore(&hcd_root_hub_lock, flags);
+        return rc;
+}
 
-        return 0;
+
+
+/*
+ * Show & store the current value of authorized_default
+ */
+static ssize_t usb_host_authorized_default_show(struct device *dev,
+                                                struct device_attribute *attr,
+                                                char *buf)
+{
+        struct usb_device *rh_usb_dev = to_usb_device(dev);
+        struct usb_bus *usb_bus = rh_usb_dev->bus;
+        struct usb_hcd *usb_hcd;
+
+        if (usb_bus == NULL)    /* FIXME: not sure if this case is possible */
+                return -ENODEV;
+        usb_hcd = bus_to_hcd(usb_bus);
+        return snprintf(buf, PAGE_SIZE, "%u\n", usb_hcd->authorized_default);
+}
+
+static ssize_t usb_host_authorized_default_store(struct device *dev,
+                                                 struct device_attribute *attr,
+                                                 const char *buf, size_t size)
+{
+        ssize_t result;
+        unsigned val;
+        struct usb_device *rh_usb_dev = to_usb_device(dev);
+        struct usb_bus *usb_bus = rh_usb_dev->bus;
+        struct usb_hcd *usb_hcd;
+
+        if (usb_bus == NULL)    /* FIXME: not sure if this case is possible */
+                return -ENODEV;
+        usb_hcd = bus_to_hcd(usb_bus);
+        result = sscanf(buf, "%u\n", &val);
+        if (result == 1) {
+                usb_hcd->authorized_default = val? 1 : 0;
+                result = size;
+        }
+        else
+                result = -EINVAL;
+        return result;
 }
 
+static DEVICE_ATTR(authorized_default, 0644,
+            usb_host_authorized_default_show,
+            usb_host_authorized_default_store);
+
+
+/* Group all the USB bus attributes */
+static struct attribute *usb_bus_attrs[] = {
+                &dev_attr_authorized_default.attr,
+                NULL,
+};
+
+static struct attribute_group usb_bus_attr_group = {
+        .name = NULL,   /* we want them in the same directory */
+        .attrs = usb_bus_attrs,
+};
+
+
+
 /*-------------------------------------------------------------------------*/
 
 static struct class *usb_host_class;
@@ -726,27 +797,23 @@ static void usb_bus_init (struct usb_bus *bus)
  */
 static int usb_register_bus(struct usb_bus *bus)
 {
+        int result = -E2BIG;
         int busnum;
 
         mutex_lock(&usb_bus_list_lock);
         busnum = find_next_zero_bit (busmap.busmap, USB_MAXBUS, 1);
-        if (busnum < USB_MAXBUS) {
-                set_bit (busnum, busmap.busmap);
-                bus->busnum = busnum;
-        } else {
+        if (busnum >= USB_MAXBUS) {
                 printk (KERN_ERR "%s: too many buses\n", usbcore_name);
-                mutex_unlock(&usb_bus_list_lock);
-                return -E2BIG;
+                goto error_find_busnum;
         }
-
+        set_bit (busnum, busmap.busmap);
+        bus->busnum = busnum;
         bus->class_dev = class_device_create(usb_host_class, NULL, MKDEV(0,0),
-                                             bus->controller, "usb_host%d", busnum);
-        if (IS_ERR(bus->class_dev)) {
-                clear_bit(busnum, busmap.busmap);
-                mutex_unlock(&usb_bus_list_lock);
-                return PTR_ERR(bus->class_dev);
-        }
-
+                                             bus->controller, "usb_host%d",
+                                             busnum);
+        result = PTR_ERR(bus->class_dev);
+        if (IS_ERR(bus->class_dev))
+                goto error_create_class_dev;
         class_set_devdata(bus->class_dev, bus);
 
         /* Add it to the local list of buses */
@@ -755,8 +822,15 @@ static int usb_register_bus(struct usb_bus *bus)
 
         usb_notify_add_bus(bus);
 
-        dev_info (bus->controller, "new USB bus registered, assigned bus number %d\n", bus->busnum);
+        dev_info (bus->controller, "new USB bus registered, assigned bus "
+                  "number %d\n", bus->busnum);
         return 0;
+
+error_create_class_dev:
+        clear_bit(busnum, busmap.busmap);
+error_find_busnum:
+        mutex_unlock(&usb_bus_list_lock);
+        return result;
 }
 
 /**
@@ -908,103 +982,145 @@ EXPORT_SYMBOL (usb_calc_bus_time);
 
 /*-------------------------------------------------------------------------*/
 
-static void urb_unlink(struct usb_hcd *hcd, struct urb *urb)
+/**
+ * usb_hcd_link_urb_to_ep - add an URB to its endpoint queue
+ * @hcd: host controller to which @urb was submitted
+ * @urb: URB being submitted
+ *
+ * Host controller drivers should call this routine in their enqueue()
+ * method.  The HCD's private spinlock must be held and interrupts must
+ * be disabled.  The actions carried out here are required for URB
+ * submission, as well as for endpoint shutdown and for usb_kill_urb.
+ *
+ * Returns 0 for no error, otherwise a negative error code (in which case
+ * the enqueue() method must fail).  If no error occurs but enqueue() fails
+ * anyway, it must call usb_hcd_unlink_urb_from_ep() before releasing
+ * the private spinlock and returning.
+ */
+int usb_hcd_link_urb_to_ep(struct usb_hcd *hcd, struct urb *urb)
 {
-        unsigned long           flags;
+        int             rc = 0;
 
-        /* clear all state linking urb to this dev (and hcd) */
-        spin_lock_irqsave(&hcd_urb_list_lock, flags);
-        list_del_init (&urb->urb_list);
-        spin_unlock_irqrestore(&hcd_urb_list_lock, flags);
+        spin_lock(&hcd_urb_list_lock);
 
-        if (hcd->self.uses_dma && !is_root_hub(urb->dev)) {
-                if (usb_pipecontrol (urb->pipe)
-                        && !(urb->transfer_flags & URB_NO_SETUP_DMA_MAP))
-                        dma_unmap_single (hcd->self.controller, urb->setup_dma,
-                                        sizeof (struct usb_ctrlrequest),
-                                        DMA_TO_DEVICE);
-                if (urb->transfer_buffer_length != 0
-                        && !(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP))
-                        dma_unmap_single (hcd->self.controller,
-                                        urb->transfer_dma,
-                                        urb->transfer_buffer_length,
-                                        usb_pipein (urb->pipe)
-                                            ? DMA_FROM_DEVICE
-                                            : DMA_TO_DEVICE);
+        /* Check that the URB isn't being killed */
+        if (unlikely(urb->reject)) {
+                rc = -EPERM;
+                goto done;
         }
-}
-
-/* may be called in any context with a valid urb->dev usecount
- * caller surrenders "ownership" of urb
- * expects usb_submit_urb() to have sanity checked and conditioned all
- * inputs in the urb
- */
-int usb_hcd_submit_urb (struct urb *urb, gfp_t mem_flags)
-{
-        int                     status;
-        struct usb_hcd          *hcd = bus_to_hcd(urb->dev->bus);
-        struct usb_host_endpoint *ep;
-        unsigned long           flags;
 
-        if (!hcd)
-                return -ENODEV;
+        if (unlikely(!urb->ep->enabled)) {
+                rc = -ENOENT;
+                goto done;
+        }
 
-        usbmon_urb_submit(&hcd->self, urb);
+        if (unlikely(!urb->dev->can_submit)) {
+                rc = -EHOSTUNREACH;
+                goto done;
+        }
 
         /*
-         * Atomically queue the urb,  first to our records, then to the HCD.
-         * Access to urb->status is controlled by urb->lock ... changes on
-         * i/o completion (normal or fault) or unlinking.
+         * Check the host controller's state and add the URB to the
+         * endpoint's queue.
          */
-
-        // FIXME:  verify that quiescing hc works right (RH cleans up)
-
-        spin_lock_irqsave(&hcd_urb_list_lock, flags);
-        ep = (usb_pipein(urb->pipe) ? urb->dev->ep_in : urb->dev->ep_out)
-                        [usb_pipeendpoint(urb->pipe)];
-        if (unlikely (!ep))
-                status = -ENOENT;
-        else if (unlikely (urb->reject))
-                status = -EPERM;
-        else switch (hcd->state) {
+        switch (hcd->state) {
         case HC_STATE_RUNNING:
         case HC_STATE_RESUMING:
-                list_add_tail (&urb->urb_list, &ep->urb_list);
-                status = 0;
+                urb->unlinked = 0;
+                list_add_tail(&urb->urb_list, &urb->ep->urb_list);
                 break;
         default:
-                status = -ESHUTDOWN;
-                break;
+                rc = -ESHUTDOWN;
+                goto done;
         }
-        spin_unlock_irqrestore(&hcd_urb_list_lock, flags);
-        if (status) {
-                INIT_LIST_HEAD (&urb->urb_list);
-                usbmon_urb_submit_error(&hcd->self, urb, status);
-                return status;
+ done:
+        spin_unlock(&hcd_urb_list_lock);
+        return rc;
+}
+EXPORT_SYMBOL_GPL(usb_hcd_link_urb_to_ep);
+
+/**
+ * usb_hcd_check_unlink_urb - check whether an URB may be unlinked
+ * @hcd: host controller to which @urb was submitted
+ * @urb: URB being checked for unlinkability
+ * @status: error code to store in @urb if the unlink succeeds
+ *
+ * Host controller drivers should call this routine in their dequeue()
+ * method.  The HCD's private spinlock must be held and interrupts must
+ * be disabled.  The actions carried out here are required for making
+ * sure than an unlink is valid.
+ *
+ * Returns 0 for no error, otherwise a negative error code (in which case
+ * the dequeue() method must fail).  The possible error codes are:
+ *
+ *      -EIDRM: @urb was not submitted or has already completed.
+ *              The completion function may not have been called yet.
+ *
+ *      -EBUSY: @urb has already been unlinked.
+ */
+int usb_hcd_check_unlink_urb(struct usb_hcd *hcd, struct urb *urb,
+                int status)
+{
+        struct list_head        *tmp;
+
+        /* insist the urb is still queued */
+        list_for_each(tmp, &urb->ep->urb_list) {
+                if (tmp == &urb->urb_list)
+                        break;
         }
+        if (tmp != &urb->urb_list)
+                return -EIDRM;
 
-        /* increment urb's reference count as part of giving it to the HCD
-         * (which now controls it).  HCD guarantees that it either returns
-         * an error or calls giveback(), but not both.
+        /* Any status except -EINPROGRESS means something already started to
+         * unlink this URB from the hardware.  So there's no more work to do.
          */
-        urb = usb_get_urb (urb);
-        atomic_inc (&urb->use_count);
-
-        if (is_root_hub(urb->dev)) {
-                /* NOTE:  requirement on hub callers (usbfs and the hub
-                 * driver, for now) that URBs' urb->transfer_buffer be
-                 * valid and usb_buffer_{sync,unmap}() not be needed, since
-                 * they could clobber root hub response data.
-                 */
-                status = rh_urb_enqueue (hcd, urb);
-                goto done;
+        if (urb->unlinked)
+                return -EBUSY;
+        urb->unlinked = status;
+
+        /* IRQ setup can easily be broken so that USB controllers
+         * never get completion IRQs ... maybe even the ones we need to
+         * finish unlinking the initial failed usb_set_address()
+         * or device descriptor fetch.
+         */
+        if (!test_bit(HCD_FLAG_SAW_IRQ, &hcd->flags) &&
+                        !is_root_hub(urb->dev)) {
+                dev_warn(hcd->self.controller, "Unlink after no-IRQ?  "
+                        "Controller is probably using the wrong IRQ.\n");
+                set_bit(HCD_FLAG_SAW_IRQ, &hcd->flags);
         }
 
-        /* lower level hcd code should use *_dma exclusively,
+        return 0;
+}
+EXPORT_SYMBOL_GPL(usb_hcd_check_unlink_urb);
+
+/**
+ * usb_hcd_unlink_urb_from_ep - remove an URB from its endpoint queue
+ * @hcd: host controller to which @urb was submitted
+ * @urb: URB being unlinked
+ *
+ * Host controller drivers should call this routine before calling
+ * usb_hcd_giveback_urb().  The HCD's private spinlock must be held and
+ * interrupts must be disabled.  The actions carried out here are required
+ * for URB completion.
+ */
+void usb_hcd_unlink_urb_from_ep(struct usb_hcd *hcd, struct urb *urb)
+{
+        /* clear all state linking urb to this dev (and hcd) */
+        spin_lock(&hcd_urb_list_lock);
+        list_del_init(&urb->urb_list);
+        spin_unlock(&hcd_urb_list_lock);
+}
+EXPORT_SYMBOL_GPL(usb_hcd_unlink_urb_from_ep);
+
+static void map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb)
+{
+        /* Map the URB's buffers for DMA access.
+         * Lower level HCD code should use *_dma exclusively,
          * unless it uses pio or talks to another transport.
          */
-        if (hcd->self.uses_dma) {
-                if (usb_pipecontrol (urb->pipe)
+        if (hcd->self.uses_dma && !is_root_hub(urb->dev)) {
+                if (usb_endpoint_xfer_control(&urb->ep->desc)
                         && !(urb->transfer_flags & URB_NO_SETUP_DMA_MAP))
                         urb->setup_dma = dma_map_single (
                                         hcd->self.controller,
@@ -1017,20 +1133,75 @@ int usb_hcd_submit_urb (struct urb *urb, gfp_t mem_flags)
                                         hcd->self.controller,
                                         urb->transfer_buffer,
                                         urb->transfer_buffer_length,
-                                        usb_pipein (urb->pipe)
+                                        usb_urb_dir_in(urb)
                                             ? DMA_FROM_DEVICE
                                             : DMA_TO_DEVICE);
         }
+}
 
-        status = hcd->driver->urb_enqueue (hcd, ep, urb, mem_flags);
-done:
-        if (unlikely (status)) {
-                urb_unlink(hcd, urb);
-                atomic_dec (&urb->use_count);
-                if (urb->reject)
-                        wake_up (&usb_kill_urb_queue);
+static void unmap_urb_for_dma(struct usb_hcd *hcd, struct urb *urb)
+{
+        if (hcd->self.uses_dma && !is_root_hub(urb->dev)) {
+                if (usb_endpoint_xfer_control(&urb->ep->desc)
+                        && !(urb->transfer_flags & URB_NO_SETUP_DMA_MAP))
+                        dma_unmap_single(hcd->self.controller, urb->setup_dma,
+                                        sizeof(struct usb_ctrlrequest),
+                                        DMA_TO_DEVICE);
+                if (urb->transfer_buffer_length != 0
+                        && !(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP))
+                        dma_unmap_single(hcd->self.controller,
+                                        urb->transfer_dma,
+                                        urb->transfer_buffer_length,
+                                        usb_urb_dir_in(urb)
+                                            ? DMA_FROM_DEVICE
+                                            : DMA_TO_DEVICE);
+        }
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* may be called in any context with a valid urb->dev usecount
+ * caller surrenders "ownership" of urb
+ * expects usb_submit_urb() to have sanity checked and conditioned all
+ * inputs in the urb
+ */
+int usb_hcd_submit_urb (struct urb *urb, gfp_t mem_flags)
+{
+        int                     status;
+        struct usb_hcd          *hcd = bus_to_hcd(urb->dev->bus);
+
+        /* increment urb's reference count as part of giving it to the HCD
+         * (which will control it).  HCD guarantees that it either returns
+         * an error or calls giveback(), but not both.
+         */
+        usb_get_urb(urb);
+        atomic_inc(&urb->use_count);
+        atomic_inc(&urb->dev->urbnum);
+        usbmon_urb_submit(&hcd->self, urb);
+
+        /* NOTE requirements on root-hub callers (usbfs and the hub
+         * driver, for now):  URBs' urb->transfer_buffer must be
+         * valid and usb_buffer_{sync,unmap}() not be needed, since
+         * they could clobber root hub response data.  Also, control
+         * URBs must be submitted in process context with interrupts
+         * enabled.
+         */
+        map_urb_for_dma(hcd, urb);
+        if (is_root_hub(urb->dev))
+                status = rh_urb_enqueue(hcd, urb);
+        else
+                status = hcd->driver->urb_enqueue(hcd, urb, mem_flags);
+
+        if (unlikely(status)) {
                 usbmon_urb_submit_error(&hcd->self, urb, status);
-                usb_put_urb (urb);
+                unmap_urb_for_dma(hcd, urb);
+                urb->hcpriv = NULL;
+                INIT_LIST_HEAD(&urb->urb_list);
+                atomic_dec(&urb->use_count);
+                atomic_dec(&urb->dev->urbnum);
+                if (urb->reject)
+                        wake_up(&usb_kill_urb_queue);
+                usb_put_urb(urb);
         }
         return status;
 }
@@ -1042,24 +1213,19 @@ done:
  * soon as practical.  we've already set up the urb's return status,
  * but we can't know if the callback completed already.
  */
-static int
-unlink1 (struct usb_hcd *hcd, struct urb *urb)
+static int unlink1(struct usb_hcd *hcd, struct urb *urb, int status)
 {
         int             value;
 
         if (is_root_hub(urb->dev))
-                value = usb_rh_urb_dequeue (hcd, urb);
+                value = usb_rh_urb_dequeue(hcd, urb, status);
         else {
 
                 /* The only reason an HCD might fail this call is if
                  * it has not yet fully queued the urb to begin with.
                  * Such failures should be harmless. */
-                value = hcd->driver->urb_dequeue (hcd, urb);
+                value = hcd->driver->urb_dequeue(hcd, urb, status);
         }
-
-        if (value != 0)
-                dev_dbg (hcd->self.controller, "dequeue %p --> %d\n",
-                                urb, value);
         return value;
 }
 
@@ -1071,88 +1237,17 @@ unlink1 (struct usb_hcd *hcd, struct urb *urb)
  */
 int usb_hcd_unlink_urb (struct urb *urb, int status)
 {
-        struct usb_host_endpoint        *ep;
-        struct usb_hcd                  *hcd = NULL;
-        struct device                   *sys = NULL;
-        unsigned long                   flags;
-        struct list_head                *tmp;
-        int                             retval;
-
-        if (!urb)
-                return -EINVAL;
-        if (!urb->dev || !urb->dev->bus)
-                return -ENODEV;
-        ep = (usb_pipein(urb->pipe) ? urb->dev->ep_in : urb->dev->ep_out)
-                        [usb_pipeendpoint(urb->pipe)];
-        if (!ep)
-                return -ENODEV;
-
-        /*
-         * we contend for urb->status with the hcd core,
-         * which changes it while returning the urb.
-         *
-         * Caller guaranteed that the urb pointer hasn't been freed, and
-         * that it was submitted.  But as a rule it can't know whether or
-         * not it's already been unlinked ... so we respect the reversed
-         * lock sequence needed for the usb_hcd_giveback_urb() code paths
-         * (urb lock, then hcd_urb_list_lock) in case some other CPU is now
-         * unlinking it.
-         */
-        spin_lock_irqsave (&urb->lock, flags);
-        spin_lock(&hcd_urb_list_lock);
+        struct usb_hcd          *hcd;
+        int                     retval;
 
-        sys = &urb->dev->dev;
         hcd = bus_to_hcd(urb->dev->bus);
-        if (hcd == NULL) {
-                retval = -ENODEV;
-                goto done;
-        }
+        retval = unlink1(hcd, urb, status);
 
-        /* insist the urb is still queued */
-        list_for_each(tmp, &ep->urb_list) {
-                if (tmp == &urb->urb_list)
-                        break;
-        }
-        if (tmp != &urb->urb_list) {
-                retval = -EIDRM;
-                goto done;
-        }
-
-        /* Any status except -EINPROGRESS means something already started to
-         * unlink this URB from the hardware.  So there's no more work to do.
-         */
-        if (urb->status != -EINPROGRESS) {
-                retval = -EBUSY;
-                goto done;
-        }
-
-        /* IRQ setup can easily be broken so that USB controllers
-         * never get completion IRQs ... maybe even the ones we need to
-         * finish unlinking the initial failed usb_set_address()
-         * or device descriptor fetch.
-         */
-        if (!test_bit(HCD_FLAG_SAW_IRQ, &hcd->flags) &&
-                        !is_root_hub(urb->dev)) {
-                dev_warn (hcd->self.controller, "Unlink after no-IRQ?  "
-                        "Controller is probably using the wrong IRQ.\n");
-                set_bit(HCD_FLAG_SAW_IRQ, &hcd->flags);
-        }
-
-        urb->status = status;
-
-        spin_unlock(&hcd_urb_list_lock);
-        spin_unlock_irqrestore (&urb->lock, flags);
-
-        retval = unlink1 (hcd, urb);
         if (retval == 0)
                 retval = -EINPROGRESS;
-        return retval;
-
-done:
-        spin_unlock(&hcd_urb_list_lock);
-        spin_unlock_irqrestore (&urb->lock, flags);
-        if (retval != -EIDRM && sys && sys->driver)
-                dev_dbg (sys, "hcd_unlink_urb %p fail %d\n", urb, retval);
+        else if (retval != -EIDRM && retval != -EBUSY)
+                dev_dbg(&urb->dev->dev, "hcd_unlink_urb %p fail %d\n",
+                                urb, retval);
         return retval;
 }
 
@@ -1162,6 +1257,7 @@ done:
  * usb_hcd_giveback_urb - return URB from HCD to device driver
  * @hcd: host controller returning the URB
  * @urb: urb being returned to the USB device driver.
+ * @status: completion status code for the URB.
  * Context: in_interrupt()
  *
  * This hands the URB from HCD to its USB device driver, using its
@@ -1169,14 +1265,27 @@ done:
  * (and is done using urb->hcpriv).  It also released all HCD locks;
  * the device driver won't cause problems if it frees, modifies,
  * or resubmits this URB.
+ *
+ * If @urb was unlinked, the value of @status will be overridden by
+ * @urb->unlinked.  Erroneous short transfers are detected in case
+ * the HCD hasn't checked for them.
  */
-void usb_hcd_giveback_urb (struct usb_hcd *hcd, struct urb *urb)
+void usb_hcd_giveback_urb(struct usb_hcd *hcd, struct urb *urb, int status)
 {
-        urb_unlink(hcd, urb);
-        usbmon_urb_complete (&hcd->self, urb);
+        urb->hcpriv = NULL;
+        if (unlikely(urb->unlinked))
+                status = urb->unlinked;
+        else if (unlikely((urb->transfer_flags & URB_SHORT_NOT_OK) &&
+                        urb->actual_length < urb->transfer_buffer_length &&
+                        !status))
+                status = -EREMOTEIO;
+
+        unmap_urb_for_dma(hcd, urb);
+        usbmon_urb_complete(&hcd->self, urb, status);
         usb_unanchor_urb(urb);
 
         /* pass ownership to the completion handler */
+        urb->status = status;
         urb->complete (urb);
         atomic_dec (&urb->use_count);
         if (unlikely (urb->reject))
@@ -1187,78 +1296,61 @@ EXPORT_SYMBOL (usb_hcd_giveback_urb);
 
 /*-------------------------------------------------------------------------*/
 
-/* disables the endpoint: cancels any pending urbs, then synchronizes with
- * the hcd to make sure all endpoint state is gone from hardware, and then
- * waits until the endpoint's queue is completely drained. use for
- * set_configuration, set_interface, driver removal, physical disconnect.
- *
- * example:  a qh stored in ep->hcpriv, holding state related to endpoint
- * type, maxpacket size, toggle, halt status, and scheduling.
+/* Cancel all URBs pending on this endpoint and wait for the endpoint's
+ * queue to drain completely.  The caller must first insure that no more
+ * URBs can be submitted for this endpoint.
  */
-void usb_hcd_endpoint_disable (struct usb_device *udev,
+void usb_hcd_flush_endpoint(struct usb_device *udev,
                 struct usb_host_endpoint *ep)
 {
         struct usb_hcd          *hcd;
         struct urb              *urb;
 
+        if (!ep)
+                return;
+        might_sleep();
         hcd = bus_to_hcd(udev->bus);
-        local_irq_disable ();
 
-        /* ep is already gone from udev->ep_{in,out}[]; no more submits */
+        /* No more submits can occur */
 rescan:
-        spin_lock(&hcd_urb_list_lock);
+        spin_lock_irq(&hcd_urb_list_lock);
         list_for_each_entry (urb, &ep->urb_list, urb_list) {
-                int     tmp;
+                int     is_in;
 
-                /* the urb may already have been unlinked */
-                if (urb->status != -EINPROGRESS)
+                if (urb->unlinked)
                         continue;
                 usb_get_urb (urb);
+                is_in = usb_urb_dir_in(urb);
                 spin_unlock(&hcd_urb_list_lock);
 
-                spin_lock (&urb->lock);
-                tmp = urb->status;
-                if (tmp == -EINPROGRESS)
-                        urb->status = -ESHUTDOWN;
-                spin_unlock (&urb->lock);
-
-                /* kick hcd unless it's already returning this */
-                if (tmp == -EINPROGRESS) {
-                        tmp = urb->pipe;
-                        unlink1 (hcd, urb);
-                        dev_dbg (hcd->self.controller,
-                                "shutdown urb %p pipe %08x ep%d%s%s\n",
-                                urb, tmp, usb_pipeendpoint (tmp),
-                                (tmp & USB_DIR_IN) ? "in" : "out",
-                                ({ char *s; \
-                                 switch (usb_pipetype (tmp)) { \
-                                 case PIPE_CONTROL:     s = ""; break; \
-                                 case PIPE_BULK:        s = "-bulk"; break; \
-                                 case PIPE_INTERRUPT:   s = "-intr"; break; \
-                                 default:               s = "-iso"; break; \
-                                }; s;}));
-                }
+                /* kick hcd */
+                unlink1(hcd, urb, -ESHUTDOWN);
+                dev_dbg (hcd->self.controller,
+                        "shutdown urb %p ep%d%s%s\n",
+                        urb, usb_endpoint_num(&ep->desc),
+                        is_in ? "in" : "out",
+                        ({      char *s;
+
+                                 switch (usb_endpoint_type(&ep->desc)) {
+                                 case USB_ENDPOINT_XFER_CONTROL:
+                                        s = ""; break;
+                                 case USB_ENDPOINT_XFER_BULK:
+                                        s = "-bulk"; break;
+                                 case USB_ENDPOINT_XFER_INT:
+                                        s = "-intr"; break;
+                                 default:
+                                        s = "-iso"; break;
+                                };
+                                s;
+                        }));
                 usb_put_urb (urb);
 
                 /* list contents may have changed */
                 goto rescan;
         }
-        spin_unlock(&hcd_urb_list_lock);
-        local_irq_enable ();
-
-        /* synchronize with the hardware, so old configuration state
-         * clears out immediately (and will be freed).
-         */
-        might_sleep ();
-        if (hcd->driver->endpoint_disable)
-                hcd->driver->endpoint_disable (hcd, ep);
+        spin_unlock_irq(&hcd_urb_list_lock);
 
-        /* Wait until the endpoint queue is completely empty.  Most HCDs
-         * will have done this already in their endpoint_disable method,
-         * but some might not.  And there could be root-hub control URBs
-         * still pending since they aren't affected by the HCDs'
-         * endpoint_disable methods.
-         */
+        /* Wait until the endpoint queue is completely empty */
         while (!list_empty (&ep->urb_list)) {
                 spin_lock_irq(&hcd_urb_list_lock);
 
@@ -1278,6 +1370,25 @@ rescan:
         }
 }
 
+/* Disables the endpoint: synchronizes with the hcd to make sure all
+ * endpoint state is gone from hardware.  usb_hcd_flush_endpoint() must
+ * have been called previously.  Use for set_configuration, set_interface,
+ * driver removal, physical disconnect.
+ *
+ * example:  a qh stored in ep->hcpriv, holding state related to endpoint
+ * type, maxpacket size, toggle, halt status, and scheduling.
+ */
+void usb_hcd_disable_endpoint(struct usb_device *udev,
+                struct usb_host_endpoint *ep)
+{
+        struct usb_hcd          *hcd;
+
+        might_sleep();
+        hcd = bus_to_hcd(udev->bus);
+        if (hcd->driver->endpoint_disable)
+                hcd->driver->endpoint_disable(hcd, ep);
+}
+
 /*-------------------------------------------------------------------------*/
 
 /* called in any context */
@@ -1525,7 +1636,6 @@ struct usb_hcd *usb_create_hcd (const struct hc_driver *driver,
         hcd->driver = driver;
         hcd->product_desc = (driver->product_desc) ? driver->product_desc :
                         "USB Host Controller";
-
         return hcd;
 }
 EXPORT_SYMBOL (usb_create_hcd);
@@ -1570,6 +1680,7 @@ int usb_add_hcd(struct usb_hcd *hcd,
 
         dev_info(hcd->self.controller, "%s\n", hcd->product_desc);
 
+        hcd->authorized_default = hcd->wireless? 0 : 1;
         set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
 
         /* HC is in reset state, but accessible.  Now do the one-time init,
@@ -1646,10 +1757,20 @@ int usb_add_hcd(struct usb_hcd *hcd,
         if ((retval = register_root_hub(hcd)) != 0)
                 goto err_register_root_hub;
 
+        retval = sysfs_create_group(&rhdev->dev.kobj, &usb_bus_attr_group);
+        if (retval < 0) {
+                printk(KERN_ERR "Cannot register USB bus sysfs attributes: %d\n",
+                       retval);
+                goto error_create_attr_group;
+        }
         if (hcd->uses_new_polling && hcd->poll_rh)
                 usb_hcd_poll_rh_status(hcd);
         return retval;
 
+error_create_attr_group:
+        mutex_lock(&usb_bus_list_lock);
+        usb_disconnect(&hcd->self.root_hub);
+        mutex_unlock(&usb_bus_list_lock);
 err_register_root_hub:
         hcd->driver->stop(hcd);
 err_hcd_driver_start:
@@ -1691,6 +1812,7 @@ void usb_remove_hcd(struct usb_hcd *hcd)
         cancel_work_sync(&hcd->wakeup_work);
 #endif
 
+        sysfs_remove_group(&hcd->self.root_hub->dev.kobj, &usb_bus_attr_group);
         mutex_lock(&usb_bus_list_lock);
         usb_disconnect(&hcd->self.root_hub);
         mutex_unlock(&usb_bus_list_lock);
diff --git a/drivers/usb/core/hcd.h b/drivers/usb/core/hcd.h
index b5ebb73c2332..98e24194a4ab 100644
--- a/drivers/usb/core/hcd.h
+++ b/drivers/usb/core/hcd.h
@@ -19,6 +19,8 @@
 
 #ifdef __KERNEL__
 
+#include <linux/rwsem.h>
+
 /* This file contains declarations of usbcore internals that are mostly
  * used or exposed by Host Controller Drivers.
  */
@@ -51,6 +53,12 @@
  *
  * Since "struct usb_bus" is so thin, you can't share much code in it.
  * This framework is a layer over that, and should be more sharable.
+ *
+ * @authorized_default: Specifies if new devices are authorized to
+ *                      connect by default or they require explicit
+ *                      user space authorization; this bit is settable
+ *                      through /sys/class/usb_host/X/authorized_default.
+ *                      For the rest is RO, so we don't lock to r/w it.
  */
 
 /*-------------------------------------------------------------------------*/
@@ -90,6 +98,7 @@ struct usb_hcd {
         unsigned                poll_rh:1;      /* poll for rh status? */
         unsigned                poll_pending:1; /* status has changed? */
         unsigned                wireless:1;     /* Wireless USB HCD */
+        unsigned                authorized_default:1;
 
         int                     irq;            /* irq allocated */
         void __iomem            *regs;          /* device memory/io */
@@ -182,11 +191,10 @@ struct hc_driver {
         int     (*get_frame_number) (struct usb_hcd *hcd);
 
         /* manage i/o requests, device state */
-        int     (*urb_enqueue) (struct usb_hcd *hcd,
-                                        struct usb_host_endpoint *ep,
-                                        struct urb *urb,
-                                        gfp_t mem_flags);
-        int     (*urb_dequeue) (struct usb_hcd *hcd, struct urb *urb);
+        int     (*urb_enqueue)(struct usb_hcd *hcd,
+                                struct urb *urb, gfp_t mem_flags);
+        int     (*urb_dequeue)(struct usb_hcd *hcd,
+                                struct urb *urb, int status);
 
         /* hw synch, freeing endpoint resources that urb_dequeue can't */
         void    (*endpoint_disable)(struct usb_hcd *hcd,
@@ -204,10 +212,18 @@ struct hc_driver {
                 /* Needed only if port-change IRQs are level-triggered */
 };
 
+extern int usb_hcd_link_urb_to_ep(struct usb_hcd *hcd, struct urb *urb);
+extern int usb_hcd_check_unlink_urb(struct usb_hcd *hcd, struct urb *urb,
+                int status);
+extern void usb_hcd_unlink_urb_from_ep(struct usb_hcd *hcd, struct urb *urb);
+
 extern int usb_hcd_submit_urb (struct urb *urb, gfp_t mem_flags);
 extern int usb_hcd_unlink_urb (struct urb *urb, int status);
-extern void usb_hcd_giveback_urb (struct usb_hcd *hcd, struct urb *urb);
-extern void usb_hcd_endpoint_disable (struct usb_device *udev,
+extern void usb_hcd_giveback_urb(struct usb_hcd *hcd, struct urb *urb,
+                int status);
+extern void usb_hcd_flush_endpoint(struct usb_device *udev,
+                struct usb_host_endpoint *ep);
+extern void usb_hcd_disable_endpoint(struct usb_device *udev,
                 struct usb_host_endpoint *ep);
 extern int usb_hcd_get_frame_number (struct usb_device *udev);
 
@@ -402,7 +418,7 @@ static inline void usbfs_cleanup(void) { }
 struct usb_mon_operations {
         void (*urb_submit)(struct usb_bus *bus, struct urb *urb);
         void (*urb_submit_error)(struct usb_bus *bus, struct urb *urb, int err);
-        void (*urb_complete)(struct usb_bus *bus, struct urb *urb);
+        void (*urb_complete)(struct usb_bus *bus, struct urb *urb, int status);
         /* void (*urb_unlink)(struct usb_bus *bus, struct urb *urb); */
 };
 
@@ -421,10 +437,11 @@ static inline void usbmon_urb_submit_error(struct usb_bus *bus, struct urb *urb,
                 (*mon_ops->urb_submit_error)(bus, urb, error);
 }
 
-static inline void usbmon_urb_complete(struct usb_bus *bus, struct urb *urb)
+static inline void usbmon_urb_complete(struct usb_bus *bus, struct urb *urb,
+                int status)
 {
         if (bus->monitored)
-                (*mon_ops->urb_complete)(bus, urb);
+                (*mon_ops->urb_complete)(bus, urb, status);
 }
 
 int usb_mon_register(struct usb_mon_operations *ops);
@@ -435,7 +452,8 @@ void usb_mon_deregister(void);
 static inline void usbmon_urb_submit(struct usb_bus *bus, struct urb *urb) {}
 static inline void usbmon_urb_submit_error(struct usb_bus *bus, struct urb *urb,
     int error) {}
-static inline void usbmon_urb_complete(struct usb_bus *bus, struct urb *urb) {}
+static inline void usbmon_urb_complete(struct usb_bus *bus, struct urb *urb,
+                int status) {}
 
 #endif /* CONFIG_USB_MON */
 
@@ -454,5 +472,9 @@ static inline void usbmon_urb_complete(struct usb_bus *bus, struct urb *urb) {}
                 : (in_interrupt () ? "in_interrupt" : "can sleep"))
 
 
-#endif /* __KERNEL__ */
+/* This rwsem is for use only by the hub driver and ehci-hcd.
+ * Nobody else should touch it.
+ */
+extern struct rw_semaphore ehci_cf_port_reset_rwsem;
 
+#endif /* __KERNEL__ */
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index e341a1da517f..d20cb545a6e4 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -125,6 +125,12 @@ MODULE_PARM_DESC(use_both_schemes,
                 "try the other device initialization scheme if the "
                 "first one fails");
 
+/* Mutual exclusion for EHCI CF initialization.  This interferes with
+ * port reset on some companion controllers.
+ */
+DECLARE_RWSEM(ehci_cf_port_reset_rwsem);
+EXPORT_SYMBOL_GPL(ehci_cf_port_reset_rwsem);
+
 
 static inline char *portspeed(int portstatus)
 {
@@ -347,11 +353,11 @@ void usb_kick_khubd(struct usb_device *hdev)
 static void hub_irq(struct urb *urb)
 {
         struct usb_hub *hub = urb->context;
-        int status;
+        int status = urb->status;
         int i;
         unsigned long bits;
 
-        switch (urb->status) {
+        switch (status) {
         case -ENOENT:           /* synchronous unlink */
         case -ECONNRESET:       /* async unlink */
         case -ESHUTDOWN:        /* hardware going away */
@@ -359,10 +365,10 @@ static void hub_irq(struct urb *urb)
 
         default:                /* presumably an error */
                 /* Cause a hub reset after 10 consecutive errors */
-                dev_dbg (hub->intfdev, "transfer --> %d\n", urb->status);
+                dev_dbg (hub->intfdev, "transfer --> %d\n", status);
                 if ((++hub->nerrors < 10) || hub->error)
                         goto resubmit;
-                hub->error = urb->status;
+                hub->error = status;
                 /* FALL THROUGH */
 
         /* let khubd handle things */
@@ -1220,54 +1226,14 @@ static inline void show_string(struct usb_device *udev, char *id, char *string)
 #endif
 
 /**
- * usb_new_device - perform initial device setup (usbcore-internal)
+ * usb_configure_device_otg - FIXME (usbcore-internal)
  * @udev: newly addressed device (in ADDRESS state)
  *
- * This is called with devices which have been enumerated, but not yet
- * configured.  The device descriptor is available, but not descriptors
- * for any device configuration.  The caller must have locked either
- * the parent hub (if udev is a normal device) or else the
- * usb_bus_list_lock (if udev is a root hub).  The parent's pointer to
- * udev has already been installed, but udev is not yet visible through
- * sysfs or other filesystem code.
- *
- * It will return if the device is configured properly or not.  Zero if
- * the interface was registered with the driver core; else a negative
- * errno value.
- *
- * This call is synchronous, and may not be used in an interrupt context.
- *
- * Only the hub driver or root-hub registrar should ever call this.
+ * Do configuration for On-The-Go devices
  */
-int usb_new_device(struct usb_device *udev)
+static int usb_configure_device_otg(struct usb_device *udev)
 {
-        int err;
-
-        /* Determine quirks */
-        usb_detect_quirks(udev);
-
-        err = usb_get_configuration(udev);
-        if (err < 0) {
-                dev_err(&udev->dev, "can't read configurations, error %d\n",
-                        err);
-                goto fail;
-        }
-
-        /* read the standard strings and cache them if present */
-        udev->product = usb_cache_string(udev, udev->descriptor.iProduct);
-        udev->manufacturer = usb_cache_string(udev,
-                        udev->descriptor.iManufacturer);
-        udev->serial = usb_cache_string(udev, udev->descriptor.iSerialNumber);
-
-        /* Tell the world! */
-        dev_dbg(&udev->dev, "new device strings: Mfr=%d, Product=%d, "
-                        "SerialNumber=%d\n",
-                        udev->descriptor.iManufacturer,
-                        udev->descriptor.iProduct,
-                        udev->descriptor.iSerialNumber);
-        show_string(udev, "Product", udev->product);
-        show_string(udev, "Manufacturer", udev->manufacturer);
-        show_string(udev, "SerialNumber", udev->serial);
+        int err = 0;
 
 #ifdef  CONFIG_USB_OTG
         /*
@@ -1329,8 +1295,82 @@ int usb_new_device(struct usb_device *udev)
                 err = -ENOTSUPP;
                 goto fail;
         }
+fail:
 #endif
+        return err;
+}
+
+
+/**
+ * usb_configure_device - Detect and probe device intfs/otg (usbcore-internal)
+ * @udev: newly addressed device (in ADDRESS state)
+ *
+ * This is only called by usb_new_device() and usb_authorize_device()
+ * and FIXME -- all comments that apply to them apply here wrt to
+ * environment.
+ *
+ * If the device is WUSB and not authorized, we don't attempt to read
+ * the string descriptors, as they will be errored out by the device
+ * until it has been authorized.
+ */
+static int usb_configure_device(struct usb_device *udev)
+{
+        int err;
 
+        if (udev->config == NULL) {
+                err = usb_get_configuration(udev);
+                if (err < 0) {
+                        dev_err(&udev->dev, "can't read configurations, error %d\n",
+                                err);
+                        goto fail;
+                }
+        }
+        if (udev->wusb == 1 && udev->authorized == 0) {
+                udev->product = kstrdup("n/a (unauthorized)", GFP_KERNEL);
+                udev->manufacturer = kstrdup("n/a (unauthorized)", GFP_KERNEL);
+                udev->serial = kstrdup("n/a (unauthorized)", GFP_KERNEL);
+        }
+        else {
+                /* read the standard strings and cache them if present */
+                udev->product = usb_cache_string(udev, udev->descriptor.iProduct);
+                udev->manufacturer = usb_cache_string(udev,
+                                                      udev->descriptor.iManufacturer);
+                udev->serial = usb_cache_string(udev, udev->descriptor.iSerialNumber);
+        }
+        err = usb_configure_device_otg(udev);
+fail:
+        return err;
+}
+
+
+/**
+ * usb_new_device - perform initial device setup (usbcore-internal)
+ * @udev: newly addressed device (in ADDRESS state)
+ *
+ * This is called with devices which have been enumerated, but not yet
+ * configured.  The device descriptor is available, but not descriptors
+ * for any device configuration.  The caller must have locked either
+ * the parent hub (if udev is a normal device) or else the
+ * usb_bus_list_lock (if udev is a root hub).  The parent's pointer to
+ * udev has already been installed, but udev is not yet visible through
+ * sysfs or other filesystem code.
+ *
+ * It will return if the device is configured properly or not.  Zero if
+ * the interface was registered with the driver core; else a negative
+ * errno value.
+ *
+ * This call is synchronous, and may not be used in an interrupt context.
+ *
+ * Only the hub driver or root-hub registrar should ever call this.
+ */
+int usb_new_device(struct usb_device *udev)
+{
+        int err;
+
+        usb_detect_quirks(udev);                /* Determine quirks */
+        err = usb_configure_device(udev);       /* detect & probe dev/intfs */
+        if (err < 0)
+                goto fail;
         /* export the usbdev device-node for libusb */
         udev->dev.devt = MKDEV(USB_DEVICE_MAJOR,
                         (((udev->bus->busnum-1) * 128) + (udev->devnum-1)));
@@ -1346,19 +1386,106 @@ int usb_new_device(struct usb_device *udev)
         err = device_add(&udev->dev);
         if (err) {
                 dev_err(&udev->dev, "can't device_add, error %d\n", err);
-                if (udev->parent)
-                        usb_autosuspend_device(udev->parent);
                 goto fail;
         }
 
-exit:
+        /* Tell the world! */
+        dev_dbg(&udev->dev, "new device strings: Mfr=%d, Product=%d, "
+                "SerialNumber=%d\n",
+                udev->descriptor.iManufacturer,
+                udev->descriptor.iProduct,
+                udev->descriptor.iSerialNumber);
+        show_string(udev, "Product", udev->product);
+        show_string(udev, "Manufacturer", udev->manufacturer);
+        show_string(udev, "SerialNumber", udev->serial);
         return err;
 
 fail:
         usb_set_device_state(udev, USB_STATE_NOTATTACHED);
-        goto exit;
+        return err;
 }
 
+
+/**
+ * Similar to usb_disconnect()
+ *
+ * We share a lock (that we have) with device_del(), so we need to
+ * defer its call.
+ */
+int usb_deauthorize_device(struct usb_device *usb_dev)
+{
+        unsigned cnt;
+        usb_lock_device(usb_dev);
+        if (usb_dev->authorized == 0)
+                goto out_unauthorized;
+        usb_dev->authorized = 0;
+        usb_set_configuration(usb_dev, -1);
+        usb_dev->product = kstrdup("n/a (unauthorized)", GFP_KERNEL);
+        usb_dev->manufacturer = kstrdup("n/a (unauthorized)", GFP_KERNEL);
+        usb_dev->serial = kstrdup("n/a (unauthorized)", GFP_KERNEL);
+        kfree(usb_dev->config);
+        usb_dev->config = NULL;
+        for (cnt = 0; cnt < usb_dev->descriptor.bNumConfigurations; cnt++)
+                kfree(usb_dev->rawdescriptors[cnt]);
+        usb_dev->descriptor.bNumConfigurations = 0;
+        kfree(usb_dev->rawdescriptors);
+out_unauthorized:
+        usb_unlock_device(usb_dev);
+        return 0;
+}
+
+
+int usb_authorize_device(struct usb_device *usb_dev)
+{
+        int result = 0, c;
+        usb_lock_device(usb_dev);
+        if (usb_dev->authorized == 1)
+                goto out_authorized;
+        kfree(usb_dev->product);
+        usb_dev->product = NULL;
+        kfree(usb_dev->manufacturer);
+        usb_dev->manufacturer = NULL;
+        kfree(usb_dev->serial);
+        usb_dev->serial = NULL;
+        result = usb_autoresume_device(usb_dev);
+        if (result < 0) {
+                dev_err(&usb_dev->dev,
+                        "can't autoresume for authorization: %d\n", result);
+                goto error_autoresume;
+        }
+        result = usb_get_device_descriptor(usb_dev, sizeof(usb_dev->descriptor));
+        if (result < 0) {
+                dev_err(&usb_dev->dev, "can't re-read device descriptor for "
+                        "authorization: %d\n", result);
+                goto error_device_descriptor;
+        }
+        usb_dev->authorized = 1;
+        result = usb_configure_device(usb_dev);
+        if (result < 0)
+                goto error_configure;
+        /* Choose and set the configuration.  This registers the interfaces
+         * with the driver core and lets interface drivers bind to them.
+         */
+        c = usb_choose_configuration(usb_dev);
+        if (c >= 0) {
+                result = usb_set_configuration(usb_dev, c);
+                if (result) {
+                        dev_err(&usb_dev->dev,
+                                "can't set config #%d, error %d\n", c, result);
+                        /* This need not be fatal.  The user can try to
+                         * set other configurations. */
+                }
+        }
+        dev_info(&usb_dev->dev, "authorized to connect\n");
+error_configure:
+error_device_descriptor:
+error_autoresume:
+out_authorized:
+        usb_unlock_device(usb_dev);     // complements locktree
+        return result;
+}
+
+
 static int hub_port_status(struct usb_hub *hub, int port1,
                                u16 *status, u16 *change)
 {
@@ -1460,6 +1587,11 @@ static int hub_port_reset(struct usb_hub *hub, int port1,
 {
         int i, status;
 
+        /* Block EHCI CF initialization during the port reset.
+         * Some companion controllers don't like it when they mix.
+         */
+        down_read(&ehci_cf_port_reset_rwsem);
+
         /* Reset the port */
         for (i = 0; i < PORT_RESET_TRIES; i++) {
                 status = set_port_feature(hub->hdev,
@@ -1481,6 +1613,7 @@ static int hub_port_reset(struct usb_hub *hub, int port1,
                 case 0:
                         /* TRSTRCY = 10 ms; plus some extra */
                         msleep(10 + 40);
+                        udev->devnum = 0;       /* Device now at address 0 */
                         /* FALL THROUGH */
                 case -ENOTCONN:
                 case -ENODEV:
@@ -1490,7 +1623,7 @@ static int hub_port_reset(struct usb_hub *hub, int port1,
                         usb_set_device_state(udev, status
                                         ? USB_STATE_NOTATTACHED
                                         : USB_STATE_DEFAULT);
-                        return status;
+                        goto done;
                 }
 
                 dev_dbg (hub->intfdev,
@@ -1503,6 +1636,8 @@ static int hub_port_reset(struct usb_hub *hub, int port1,
                 "Cannot enable port %i.  Maybe the USB cable is bad?\n",
                 port1);
 
+ done:
+        up_read(&ehci_cf_port_reset_rwsem);
         return status;
 }
 
@@ -1644,9 +1779,10 @@ static int finish_port_resume(struct usb_device *udev)
          * and device drivers will know about any resume quirks.
          */
         if (status == 0) {
+                devstatus = 0;
                 status = usb_get_status(udev, USB_RECIP_DEVICE, 0, &devstatus);
                 if (status >= 0)
-                        status = (status == 2 ? 0 : -ENODEV);
+                        status = (status > 0 ? 0 : -ENODEV);
         }
 
         if (status) {
@@ -1832,14 +1968,7 @@ static int hub_suspend(struct usb_interface *intf, pm_message_t msg)
                 struct usb_device       *udev;
 
                 udev = hdev->children [port1-1];
-                if (udev && msg.event == PM_EVENT_SUSPEND &&
-#ifdef  CONFIG_USB_SUSPEND
-                                udev->state != USB_STATE_SUSPENDED
-#else
-                                udev->dev.power.power_state.event
-                                        == PM_EVENT_ON
-#endif
-                                ) {
+                if (udev && udev->can_submit) {
                         if (!hdev->auto_pm)
                                 dev_dbg(&intf->dev, "port %d nyet suspended\n",
                                                 port1);
@@ -1998,26 +2127,27 @@ static void ep0_reinit(struct usb_device *udev)
 {
         usb_disable_endpoint(udev, 0 + USB_DIR_IN);
         usb_disable_endpoint(udev, 0 + USB_DIR_OUT);
-        udev->ep_in[0] = udev->ep_out[0] = &udev->ep0;
+        usb_enable_endpoint(udev, &udev->ep0);
 }
 
 #define usb_sndaddr0pipe()      (PIPE_CONTROL << 30)
 #define usb_rcvaddr0pipe()      ((PIPE_CONTROL << 30) | USB_DIR_IN)
 
-static int hub_set_address(struct usb_device *udev)
+static int hub_set_address(struct usb_device *udev, int devnum)
 {
         int retval;
 
-        if (udev->devnum == 0)
+        if (devnum <= 1)
                 return -EINVAL;
         if (udev->state == USB_STATE_ADDRESS)
                 return 0;
         if (udev->state != USB_STATE_DEFAULT)
                 return -EINVAL;
         retval = usb_control_msg(udev, usb_sndaddr0pipe(),
-                USB_REQ_SET_ADDRESS, 0, udev->devnum, 0,
+                USB_REQ_SET_ADDRESS, 0, devnum, 0,
                 NULL, 0, USB_CTRL_SET_TIMEOUT);
         if (retval == 0) {
+                udev->devnum = devnum;  /* Device now using proper address */
                 usb_set_device_state(udev, USB_STATE_ADDRESS);
                 ep0_reinit(udev);
         }
@@ -2044,6 +2174,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
         unsigned                delay = HUB_SHORT_RESET_TIME;
         enum usb_device_speed   oldspeed = udev->speed;
         char                    *speed, *type;
+        int                     devnum = udev->devnum;
 
         /* root hub ports have a slightly longer reset period
          * (from USB 2.0 spec, section 7.1.7.5)
@@ -2073,7 +2204,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
                 goto fail;
         }
         oldspeed = udev->speed;
-  
+
         /* USB 2.0 section 5.5.3 talks about ep0 maxpacket ...
          * it's fixed size except for full speed devices.
          * For Wireless USB devices, ep0 max packet is always 512 (tho
@@ -2114,7 +2245,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
         dev_info (&udev->dev,
                   "%s %s speed %sUSB device using %s and address %d\n",
                   (udev->config) ? "reset" : "new", speed, type,
-                  udev->bus->controller->driver->name, udev->devnum);
+                  udev->bus->controller->driver->name, devnum);
 
         /* Set up TT records, if needed  */
         if (hdev->tt) {
@@ -2201,7 +2332,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
                 }
 
                 for (j = 0; j < SET_ADDRESS_TRIES; ++j) {
-                        retval = hub_set_address(udev);
+                        retval = hub_set_address(udev, devnum);
                         if (retval >= 0)
                                 break;
                         msleep(200);
@@ -2209,7 +2340,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
                 if (retval < 0) {
                         dev_err(&udev->dev,
                                 "device not accepting address %d, error %d\n",
-                                udev->devnum, retval);
+                                devnum, retval);
                         goto fail;
                 }
  
@@ -2262,8 +2393,10 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
         retval = 0;
 
 fail:
-        if (retval)
+        if (retval) {
                 hub_port_disable(hub, port1, 0);
+                udev->devnum = devnum;  /* for disconnect processing */
+        }
         mutex_unlock(&usb_address0_mutex);
         return retval;
 }
@@ -2698,9 +2831,9 @@ static void hub_events(void)
                                 clear_hub_feature(hdev, C_HUB_LOCAL_POWER);
                                 if (hubstatus & HUB_STATUS_LOCAL_POWER)
                                         /* FIXME: Is this always true? */
-                                        hub->limited_power = 0;
-                                else
                                         hub->limited_power = 1;
+                                else
+                                        hub->limited_power = 0;
                         }
                         if (hubchange & HUB_CHANGE_OVERCURRENT) {
                                 dev_dbg (hub_dev, "overcurrent change\n");
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index b6bd05e3d439..c021af390372 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -59,8 +59,8 @@ static int usb_start_wait_urb(struct urb *urb, int timeout, int *actual_length)
                 dev_dbg(&urb->dev->dev,
                         "%s timed out on ep%d%s len=%d/%d\n",
                         current->comm,
-                        usb_pipeendpoint(urb->pipe),
-                        usb_pipein(urb->pipe) ? "in" : "out",
+                        usb_endpoint_num(&urb->ep->desc),
+                        usb_urb_dir_in(urb) ? "in" : "out",
                         urb->actual_length,
                         urb->transfer_buffer_length);
         } else
@@ -250,7 +250,8 @@ static void sg_clean (struct usb_sg_request *io)
                 io->urbs = NULL;
         }
         if (io->dev->dev.dma_mask != NULL)
-                usb_buffer_unmap_sg (io->dev, io->pipe, io->sg, io->nents);
+                usb_buffer_unmap_sg (io->dev, usb_pipein(io->pipe),
+                                io->sg, io->nents);
         io->dev = NULL;
 }
 
@@ -278,8 +279,8 @@ static void sg_complete (struct urb *urb)
                 dev_err (io->dev->bus->controller,
                         "dev %s ep%d%s scatterlist error %d/%d\n",
                         io->dev->devpath,
-                        usb_pipeendpoint (urb->pipe),
-                        usb_pipein (urb->pipe) ? "in" : "out",
+                        usb_endpoint_num(&urb->ep->desc),
+                        usb_urb_dir_in(urb) ? "in" : "out",
                         status, io->status);
                 // BUG ();
         }
@@ -379,7 +380,8 @@ int usb_sg_init (
          */
         dma = (dev->dev.dma_mask != NULL);
         if (dma)
-                io->entries = usb_buffer_map_sg (dev, pipe, sg, nents);
+                io->entries = usb_buffer_map_sg(dev, usb_pipein(pipe),
+                                sg, nents);
         else
                 io->entries = nents;
 
@@ -637,12 +639,12 @@ int usb_get_descriptor(struct usb_device *dev, unsigned char type, unsigned char
         memset(buf,0,size);     // Make sure we parse really received data
 
         for (i = 0; i < 3; ++i) {
-                /* retry on length 0 or stall; some devices are flakey */
+                /* retry on length 0 or error; some devices are flakey */
                 result = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
                                 USB_REQ_GET_DESCRIPTOR, USB_DIR_IN,
                                 (type << 8) + index, 0, buf, size,
                                 USB_CTRL_GET_TIMEOUT);
-                if (result == 0 || result == -EPIPE)
+                if (result <= 0 && result != -ETIMEDOUT)
                         continue;
                 if (result > 1 && ((u8 *)buf)[1] != type) {
                         result = -EPROTO;
@@ -1013,8 +1015,11 @@ void usb_disable_endpoint(struct usb_device *dev, unsigned int epaddr)
                 ep = dev->ep_in[epnum];
                 dev->ep_in[epnum] = NULL;
         }
-        if (ep && dev->bus)
-                usb_hcd_endpoint_disable(dev, ep);
+        if (ep) {
+                ep->enabled = 0;
+                usb_hcd_flush_endpoint(dev, ep);
+                usb_hcd_disable_endpoint(dev, ep);
+        }
 }
 
 /**
@@ -1096,23 +1101,21 @@ void usb_disable_device(struct usb_device *dev, int skip_ep0)
  * Resets the endpoint toggle, and sets dev->ep_{in,out} pointers.
  * For control endpoints, both the input and output sides are handled.
  */
-static void
-usb_enable_endpoint(struct usb_device *dev, struct usb_host_endpoint *ep)
+void usb_enable_endpoint(struct usb_device *dev, struct usb_host_endpoint *ep)
 {
-        unsigned int epaddr = ep->desc.bEndpointAddress;
-        unsigned int epnum = epaddr & USB_ENDPOINT_NUMBER_MASK;
-        int is_control;
+        int epnum = usb_endpoint_num(&ep->desc);
+        int is_out = usb_endpoint_dir_out(&ep->desc);
+        int is_control = usb_endpoint_xfer_control(&ep->desc);
 
-        is_control = ((ep->desc.bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
-                        == USB_ENDPOINT_XFER_CONTROL);
-        if (usb_endpoint_out(epaddr) || is_control) {
+        if (is_out || is_control) {
                 usb_settoggle(dev, epnum, 1, 0);
                 dev->ep_out[epnum] = ep;
         }
-        if (!usb_endpoint_out(epaddr) || is_control) {
+        if (!is_out || is_control) {
                 usb_settoggle(dev, epnum, 0, 0);
                 dev->ep_in[epnum] = ep;
         }
+        ep->enabled = 1;
 }
 
 /*
@@ -1171,6 +1174,7 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate)
         struct usb_host_interface *alt;
         int ret;
         int manual = 0;
+        int changed;
 
         if (dev->state == USB_STATE_SUSPENDED)
                 return -EHOSTUNREACH;
@@ -1210,7 +1214,8 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate)
          */
 
         /* prevent submissions using previous endpoint settings */
-        if (device_is_registered(&iface->dev))
+        changed = (iface->cur_altsetting != alt);
+        if (changed && device_is_registered(&iface->dev))
                 usb_remove_sysfs_intf_files(iface);
         usb_disable_interface(dev, iface);
 
@@ -1247,7 +1252,7 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate)
          * (Likewise, EP0 never "halts" on well designed devices.)
          */
         usb_enable_interface(dev, iface);
-        if (device_is_registered(&iface->dev))
+        if (changed && device_is_registered(&iface->dev))
                 usb_create_sysfs_intf_files(iface);
 
         return 0;
@@ -1328,7 +1333,7 @@ int usb_reset_configuration(struct usb_device *dev)
         return 0;
 }
 
-void usb_release_interface(struct device *dev)
+static void usb_release_interface(struct device *dev)
 {
         struct usb_interface *intf = to_usb_interface(dev);
         struct usb_interface_cache *intfc =
@@ -1339,14 +1344,11 @@ void usb_release_interface(struct device *dev)
 }
 
 #ifdef  CONFIG_HOTPLUG
-static int usb_if_uevent(struct device *dev, char **envp, int num_envp,
-                 char *buffer, int buffer_size)
+static int usb_if_uevent(struct device *dev, struct kobj_uevent_env *env)
 {
         struct usb_device *usb_dev;
         struct usb_interface *intf;
         struct usb_host_interface *alt;
-        int i = 0;
-        int length = 0;
 
         if (!dev)
                 return -ENODEV;
@@ -1358,16 +1360,31 @@ static int usb_if_uevent(struct device *dev, char **envp, int num_envp,
         usb_dev = interface_to_usbdev(intf);
         alt = intf->cur_altsetting;
 
-        if (add_uevent_var(envp, num_envp, &i,
-                   buffer, buffer_size, &length,
-                   "INTERFACE=%d/%d/%d",
+#ifdef CONFIG_USB_DEVICEFS
+        if (add_uevent_var(env, "DEVICE=/proc/bus/usb/%03d/%03d",
+                           usb_dev->bus->busnum, usb_dev->devnum))
+                return -ENOMEM;
+#endif
+
+        if (add_uevent_var(env, "PRODUCT=%x/%x/%x",
+                           le16_to_cpu(usb_dev->descriptor.idVendor),
+                           le16_to_cpu(usb_dev->descriptor.idProduct),
+                           le16_to_cpu(usb_dev->descriptor.bcdDevice)))
+                return -ENOMEM;
+
+        if (add_uevent_var(env, "TYPE=%d/%d/%d",
+                           usb_dev->descriptor.bDeviceClass,
+                           usb_dev->descriptor.bDeviceSubClass,
+                           usb_dev->descriptor.bDeviceProtocol))
+                return -ENOMEM;
+
+        if (add_uevent_var(env, "INTERFACE=%d/%d/%d",
                    alt->desc.bInterfaceClass,
                    alt->desc.bInterfaceSubClass,
                    alt->desc.bInterfaceProtocol))
                 return -ENOMEM;
 
-        if (add_uevent_var(envp, num_envp, &i,
-                   buffer, buffer_size, &length,
+        if (add_uevent_var(env,
                    "MODALIAS=usb:v%04Xp%04Xd%04Xdc%02Xdsc%02Xdp%02Xic%02Xisc%02Xip%02X",
                    le16_to_cpu(usb_dev->descriptor.idVendor),
                    le16_to_cpu(usb_dev->descriptor.idProduct),
@@ -1380,14 +1397,12 @@ static int usb_if_uevent(struct device *dev, char **envp, int num_envp,
                    alt->desc.bInterfaceProtocol))
                 return -ENOMEM;
 
-        envp[i] = NULL;
         return 0;
 }
 
 #else
 
-static int usb_if_uevent(struct device *dev, char **envp,
-                         int num_envp, char *buffer, int buffer_size)
+static int usb_if_uevent(struct device *dev, struct kobj_uevent_env *env)
 {
         return -ENODEV;
 }
@@ -1457,6 +1472,9 @@ static struct usb_interface_assoc_descriptor *find_iad(struct usb_device *dev,
  * channels are available independently; and choosing between open
  * standard device protocols (like CDC) or proprietary ones.
  *
+ * Note that a non-authorized device (dev->authorized == 0) will only
+ * be put in unconfigured mode.
+ *
  * Note that USB has an additional level of device configurability,
  * associated with interfaces.  That configurability is accessed using
  * usb_set_interface().
@@ -1478,7 +1496,7 @@ int usb_set_configuration(struct usb_device *dev, int configuration)
         struct usb_interface **new_interfaces = NULL;
         int n, nintf;
 
-        if (configuration == -1)
+        if (dev->authorized == 0 || configuration == -1)
                 configuration = 0;
         else {
                 for (i = 0; i < dev->descriptor.bNumConfigurations; i++) {
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index b7917c5a3c6f..d42c561c75f1 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -28,64 +28,26 @@
  * devices is broken...
  */
 static const struct usb_device_id usb_quirk_list[] = {
+        /* CBM - Flash disk */
+        { USB_DEVICE(0x0204, 0x6025), .driver_info = USB_QUIRK_RESET_RESUME },
         /* HP 5300/5370C scanner */
         { USB_DEVICE(0x03f0, 0x0701), .driver_info = USB_QUIRK_STRING_FETCH_255 },
-        /* Acer Peripherals Inc. (now BenQ Corp.) Prisa 640BU */
-        { USB_DEVICE(0x04a5, 0x207e), .driver_info = USB_QUIRK_NO_AUTOSUSPEND },
-        /* Benq S2W 3300U */
-        { USB_DEVICE(0x04a5, 0x20b0), .driver_info = USB_QUIRK_NO_AUTOSUSPEND },
-        /* Canon, Inc. CanoScan N1240U/LiDE30 */
-        { USB_DEVICE(0x04a9, 0x220e), .driver_info = USB_QUIRK_NO_AUTOSUSPEND },
-        /* Canon, Inc. CanoScan N650U/N656U */
-        { USB_DEVICE(0x04a9, 0x2206), .driver_info = USB_QUIRK_NO_AUTOSUSPEND },
-        /* Canon, Inc. CanoScan 1220U */
-        { USB_DEVICE(0x04a9, 0x2207), .driver_info = USB_QUIRK_NO_AUTOSUSPEND },
-        /* Canon, Inc. CanoScan N670U/N676U/LiDE 20 */
-        { USB_DEVICE(0x04a9, 0x220d), .driver_info = USB_QUIRK_NO_AUTOSUSPEND },
-        /* old Cannon scanner */
-        { USB_DEVICE(0x04a9, 0x2220), .driver_info = USB_QUIRK_NO_AUTOSUSPEND },
-        /* Seiko Epson Corp. Perfection 1200 */
-        { USB_DEVICE(0x04b8, 0x0104), .driver_info = USB_QUIRK_NO_AUTOSUSPEND },
-        /* Seiko Epson Corp. Perfection 660 */
-        { USB_DEVICE(0x04b8, 0x0114), .driver_info = USB_QUIRK_NO_AUTOSUSPEND },
-        /* Epson Perfection 1260 Photo */
-        { USB_DEVICE(0x04b8, 0x011d), .driver_info = USB_QUIRK_NO_AUTOSUSPEND },
-        /* Seiko Epson Corp - Perfection 1670 */
-        { USB_DEVICE(0x04b8, 0x011f), .driver_info = USB_QUIRK_NO_AUTOSUSPEND },
-        /* EPSON Perfection 2480 */
-        { USB_DEVICE(0x04b8, 0x0121), .driver_info = USB_QUIRK_NO_AUTOSUSPEND },
-        /* Seiko Epson Corp.*/
-        { USB_DEVICE(0x04b8, 0x0122), .driver_info = USB_QUIRK_NO_AUTOSUSPEND },
-        /* Samsung ML-2510 Series printer */
-        { USB_DEVICE(0x04e8, 0x327e), .driver_info = USB_QUIRK_NO_AUTOSUSPEND },
-        /* Elsa MicroLink 56k (V.250) */
-        { USB_DEVICE(0x05cc, 0x2267), .driver_info = USB_QUIRK_NO_AUTOSUSPEND },
-        /* Ultima Electronics Corp.*/
-        { USB_DEVICE(0x05d8, 0x4005), .driver_info = USB_QUIRK_NO_AUTOSUSPEND },
-        /* Agfa Snapscan1212u */
-        { USB_DEVICE(0x06bd, 0x2061), .driver_info = USB_QUIRK_NO_AUTOSUSPEND },
-        /* Umax [hex] Astra 3400U */
-        { USB_DEVICE(0x1606, 0x0060), .driver_info = USB_QUIRK_NO_AUTOSUSPEND },
+
+        /* INTEL VALUE SSD */
+        { USB_DEVICE(0x8086, 0xf1a5), .driver_info = USB_QUIRK_RESET_RESUME },
+
+        /* M-Systems Flash Disk Pioneers */
+        { USB_DEVICE(0x08ec, 0x1000), .driver_info = USB_QUIRK_RESET_RESUME },
 
         /* Philips PSC805 audio device */
         { USB_DEVICE(0x0471, 0x0155), .driver_info = USB_QUIRK_RESET_RESUME },
 
-        /* RIM Blackberry */
-        { USB_DEVICE(0x0fca, 0x0001), .driver_info = USB_QUIRK_NO_AUTOSUSPEND },
-        { USB_DEVICE(0x0fca, 0x0004), .driver_info = USB_QUIRK_NO_AUTOSUSPEND },
-        { USB_DEVICE(0x0fca, 0x0006), .driver_info = USB_QUIRK_NO_AUTOSUSPEND },
+        /* SKYMEDI USB_DRIVE */
+        { USB_DEVICE(0x1516, 0x8628), .driver_info = USB_QUIRK_RESET_RESUME },
 
         { }  /* terminating entry must be last */
 };
 
-static void usb_autosuspend_quirk(struct usb_device *udev)
-{
-#ifdef  CONFIG_USB_SUSPEND
-        /* disable autosuspend, but allow the user to re-enable it via sysfs */
-        udev->autosuspend_disabled = 1;
-#endif
-}
-
 static const struct usb_device_id *find_id(struct usb_device *udev)
 {
         const struct usb_device_id *id = usb_quirk_list;
@@ -112,7 +74,9 @@ void usb_detect_quirks(struct usb_device *udev)
                 dev_dbg(&udev->dev, "USB quirks for this device: %x\n",
                                 udev->quirks);
 
-        /* do any special quirk handling here if needed */
-        if (udev->quirks & USB_QUIRK_NO_AUTOSUSPEND)
-                usb_autosuspend_quirk(udev);
+        /* By default, disable autosuspend for all non-hubs */
+#ifdef  CONFIG_USB_SUSPEND
+        if (udev->descriptor.bDeviceClass != USB_CLASS_HUB)
+                udev->autosuspend_disabled = 1;
+#endif
 }
diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c
index 2ab222be8fd1..b04afd06e502 100644
--- a/drivers/usb/core/sysfs.c
+++ b/drivers/usb/core/sysfs.c
@@ -169,6 +169,16 @@ show_quirks(struct device *dev, struct device_attribute *attr, char *buf)
 }
 static DEVICE_ATTR(quirks, S_IRUGO, show_quirks, NULL);
 
+static ssize_t
+show_urbnum(struct device *dev, struct device_attribute *attr, char *buf)
+{
+        struct usb_device *udev;
+
+        udev = to_usb_device(dev);
+        return sprintf(buf, "%d\n", atomic_read(&udev->urbnum));
+}
+static DEVICE_ATTR(urbnum, S_IRUGO, show_urbnum, NULL);
+
 
 #if defined(CONFIG_USB_PERSIST) || defined(CONFIG_USB_SUSPEND)
 static const char power_group[] = "power";
@@ -413,6 +423,44 @@ usb_descriptor_attr(bDeviceProtocol, "%02x\n")
 usb_descriptor_attr(bNumConfigurations, "%d\n")
 usb_descriptor_attr(bMaxPacketSize0, "%d\n")
 
+
+
+/* show if the device is authorized (1) or not (0) */
+static ssize_t usb_dev_authorized_show(struct device *dev,
+                                       struct device_attribute *attr,
+                                       char *buf)
+{
+        struct usb_device *usb_dev = to_usb_device(dev);
+        return snprintf(buf, PAGE_SIZE, "%u\n", usb_dev->authorized);
+}
+
+
+/*
+ * Authorize a device to be used in the system
+ *
+ * Writing a 0 deauthorizes the device, writing a 1 authorizes it.
+ */
+static ssize_t usb_dev_authorized_store(struct device *dev,
+                                        struct device_attribute *attr,
+                                        const char *buf, size_t size)
+{
+        ssize_t result;
+        struct usb_device *usb_dev = to_usb_device(dev);
+        unsigned val;
+        result = sscanf(buf, "%u\n", &val);
+        if (result != 1)
+                result = -EINVAL;
+        else if (val == 0)
+                result = usb_deauthorize_device(usb_dev);
+        else
+                result = usb_authorize_device(usb_dev);
+        return result < 0? result : size;
+}
+
+static DEVICE_ATTR(authorized, 0644,
+            usb_dev_authorized_show, usb_dev_authorized_store);
+
+
 static struct attribute *dev_attrs[] = {
         /* current configuration's attributes */
         &dev_attr_configuration.attr,
@@ -420,6 +468,7 @@ static struct attribute *dev_attrs[] = {
         &dev_attr_bConfigurationValue.attr,
         &dev_attr_bmAttributes.attr,
         &dev_attr_bMaxPower.attr,
+        &dev_attr_urbnum.attr,
         /* device attributes */
         &dev_attr_idVendor.attr,
         &dev_attr_idProduct.attr,
@@ -435,6 +484,7 @@ static struct attribute *dev_attrs[] = {
         &dev_attr_version.attr,
         &dev_attr_maxchild.attr,
         &dev_attr_quirks.attr,
+        &dev_attr_authorized.attr,
         NULL,
 };
 static struct attribute_group dev_attr_grp = {
diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c
index be630228461c..c20c03aaf012 100644
--- a/drivers/usb/core/urb.c
+++ b/drivers/usb/core/urb.c
@@ -3,6 +3,7 @@
 #include <linux/bitops.h>
 #include <linux/slab.h>
 #include <linux/init.h>
+#include <linux/log2.h>
 #include <linux/usb.h>
 #include <linux/wait.h>
 #include "hcd.h"
@@ -38,7 +39,6 @@ void usb_init_urb(struct urb *urb)
         if (urb) {
                 memset(urb, 0, sizeof(*urb));
                 kref_init(&urb->kref);
-                spin_lock_init(&urb->lock);
                 INIT_LIST_HEAD(&urb->anchor_list);
         }
 }
@@ -277,44 +277,58 @@ EXPORT_SYMBOL_GPL(usb_unanchor_urb);
  */
 int usb_submit_urb(struct urb *urb, gfp_t mem_flags)
 {
-        int                     pipe, temp, max;
-        struct usb_device       *dev;
-        int                     is_out;
+        int                             xfertype, max;
+        struct usb_device               *dev;
+        struct usb_host_endpoint        *ep;
+        int                             is_out;
 
         if (!urb || urb->hcpriv || !urb->complete)
                 return -EINVAL;
-        if (!(dev = urb->dev) ||
-            (dev->state < USB_STATE_DEFAULT) ||
-            (!dev->bus) || (dev->devnum <= 0))
+        if (!(dev = urb->dev) || dev->state < USB_STATE_DEFAULT)
                 return -ENODEV;
-        if (dev->bus->controller->power.power_state.event != PM_EVENT_ON
-                        || dev->state == USB_STATE_SUSPENDED)
-                return -EHOSTUNREACH;
 
+        /* For now, get the endpoint from the pipe.  Eventually drivers
+         * will be required to set urb->ep directly and we will eliminate
+         * urb->pipe.
+         */
+        ep = (usb_pipein(urb->pipe) ? dev->ep_in : dev->ep_out)
+                        [usb_pipeendpoint(urb->pipe)];
+        if (!ep)
+                return -ENOENT;
+
+        urb->ep = ep;
         urb->status = -EINPROGRESS;
         urb->actual_length = 0;
 
         /* Lots of sanity checks, so HCDs can rely on clean data
          * and don't need to duplicate tests
          */
-        pipe = urb->pipe;
-        temp = usb_pipetype(pipe);
-        is_out = usb_pipeout(pipe);
+        xfertype = usb_endpoint_type(&ep->desc);
+        if (xfertype == USB_ENDPOINT_XFER_CONTROL) {
+                struct usb_ctrlrequest *setup =
+                                (struct usb_ctrlrequest *) urb->setup_packet;
+
+                if (!setup)
+                        return -ENOEXEC;
+                is_out = !(setup->bRequestType & USB_DIR_IN) ||
+                                !setup->wLength;
+        } else {
+                is_out = usb_endpoint_dir_out(&ep->desc);
+        }
 
-        if (!usb_pipecontrol(pipe) && dev->state < USB_STATE_CONFIGURED)
-                return -ENODEV;
+        /* Cache the direction for later use */
+        urb->transfer_flags = (urb->transfer_flags & ~URB_DIR_MASK) |
+                        (is_out ? URB_DIR_OUT : URB_DIR_IN);
 
-        /* FIXME there should be a sharable lock protecting us against
-         * config/altsetting changes and disconnects, kicking in here.
-         * (here == before maxpacket, and eventually endpoint type,
-         * checks get made.)
-         */
+        if (xfertype != USB_ENDPOINT_XFER_CONTROL &&
+                        dev->state < USB_STATE_CONFIGURED)
+                return -ENODEV;
 
-        max = usb_maxpacket(dev, pipe, is_out);
+        max = le16_to_cpu(ep->desc.wMaxPacketSize);
         if (max <= 0) {
                 dev_dbg(&dev->dev,
                         "bogus endpoint ep%d%s in %s (bad maxpacket %d)\n",
-                        usb_pipeendpoint(pipe), is_out ? "out" : "in",
+                        usb_endpoint_num(&ep->desc), is_out ? "out" : "in",
                         __FUNCTION__, max);
                 return -EMSGSIZE;
         }
@@ -323,7 +337,7 @@ int usb_submit_urb(struct urb *urb, gfp_t mem_flags)
          * but drivers only control those sizes for ISO.
          * while we're checking, initialize return status.
          */
-        if (temp == PIPE_ISOCHRONOUS) {
+        if (xfertype == USB_ENDPOINT_XFER_ISOC) {
                 int     n, len;
 
                 /* "high bandwidth" mode, 1-3 packets/uframe? */
@@ -358,20 +372,20 @@ int usb_submit_urb(struct urb *urb, gfp_t mem_flags)
 
         /* enforce simple/standard policy */
         allowed = (URB_NO_TRANSFER_DMA_MAP | URB_NO_SETUP_DMA_MAP |
-                        URB_NO_INTERRUPT);
-        switch (temp) {
-        case PIPE_BULK:
+                        URB_NO_INTERRUPT | URB_DIR_MASK);
+        switch (xfertype) {
+        case USB_ENDPOINT_XFER_BULK:
                 if (is_out)
                         allowed |= URB_ZERO_PACKET;
                 /* FALLTHROUGH */
-        case PIPE_CONTROL:
+        case USB_ENDPOINT_XFER_CONTROL:
                 allowed |= URB_NO_FSBR; /* only affects UHCI */
                 /* FALLTHROUGH */
         default:                        /* all non-iso endpoints */
                 if (!is_out)
                         allowed |= URB_SHORT_NOT_OK;
                 break;
-        case PIPE_ISOCHRONOUS:
+        case USB_ENDPOINT_XFER_ISOC:
                 allowed |= URB_ISO_ASAP;
                 break;
         }
@@ -393,9 +407,9 @@ int usb_submit_urb(struct urb *urb, gfp_t mem_flags)
          * supports different values... this uses EHCI/UHCI defaults (and
          * EHCI can use smaller non-default values).
          */
-        switch (temp) {
-        case PIPE_ISOCHRONOUS:
-        case PIPE_INTERRUPT:
+        switch (xfertype) {
+        case USB_ENDPOINT_XFER_ISOC:
+        case USB_ENDPOINT_XFER_INT:
                 /* too small? */
                 if (urb->interval <= 0)
                         return -EINVAL;
@@ -405,29 +419,27 @@ int usb_submit_urb(struct urb *urb, gfp_t mem_flags)
                         // NOTE usb handles 2^15
                         if (urb->interval > (1024 * 8))
                                 urb->interval = 1024 * 8;
-                        temp = 1024 * 8;
+                        max = 1024 * 8;
                         break;
                 case USB_SPEED_FULL:    /* units are frames/msec */
                 case USB_SPEED_LOW:
-                        if (temp == PIPE_INTERRUPT) {
+                        if (xfertype == USB_ENDPOINT_XFER_INT) {
                                 if (urb->interval > 255)
                                         return -EINVAL;
                                 // NOTE ohci only handles up to 32
-                                temp = 128;
+                                max = 128;
                         } else {
                                 if (urb->interval > 1024)
                                         urb->interval = 1024;
                                 // NOTE usb and ohci handle up to 2^15
-                                temp = 1024;
+                                max = 1024;
                         }
                         break;
                 default:
                         return -EINVAL;
                 }
-                /* power of two? */
-                while (temp > urb->interval)
-                        temp >>= 1;
-                urb->interval = temp;
+                /* Round down to a power of 2, no more than max */
+                urb->interval = min(max, 1 << ilog2(urb->interval));
         }
 
         return usb_hcd_submit_urb(urb, mem_flags);
@@ -496,8 +508,10 @@ int usb_unlink_urb(struct urb *urb)
 {
         if (!urb)
                 return -EINVAL;
-        if (!(urb->dev && urb->dev->bus))
+        if (!urb->dev)
                 return -ENODEV;
+        if (!urb->ep)
+                return -EIDRM;
         return usb_hcd_unlink_urb(urb, -ECONNRESET);
 }
 
@@ -523,19 +537,21 @@ int usb_unlink_urb(struct urb *urb)
  */
 void usb_kill_urb(struct urb *urb)
 {
+        static DEFINE_MUTEX(reject_mutex);
+
         might_sleep();
-        if (!(urb && urb->dev && urb->dev->bus))
+        if (!(urb && urb->dev && urb->ep))
                 return;
-        spin_lock_irq(&urb->lock);
+        mutex_lock(&reject_mutex);
         ++urb->reject;
-        spin_unlock_irq(&urb->lock);
+        mutex_unlock(&reject_mutex);
 
         usb_hcd_unlink_urb(urb, -ENOENT);
         wait_event(usb_kill_urb_queue, atomic_read(&urb->use_count) == 0);
 
-        spin_lock_irq(&urb->lock);
+        mutex_lock(&reject_mutex);
         --urb->reject;
-        spin_unlock_irq(&urb->lock);
+        mutex_unlock(&reject_mutex);
 }
 
 /**
diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
index 0fee5c66fd64..c99938d5f78e 100644
--- a/drivers/usb/core/usb.c
+++ b/drivers/usb/core/usb.c
@@ -223,6 +223,15 @@ static void ksuspend_usb_cleanup(void)
 
 #endif  /* CONFIG_PM */
 
+
+/* Returns 1 if @usb_bus is WUSB, 0 otherwise */
+static unsigned usb_bus_is_wusb(struct usb_bus *bus)
+{
+        struct usb_hcd *hcd = container_of(bus, struct usb_hcd, self);
+        return hcd->wireless;
+}
+
+
 /**
  * usb_alloc_dev - usb device constructor (usbcore-internal)
  * @parent: hub to which device is connected; null to allocate a root hub
@@ -239,6 +248,8 @@ struct usb_device *
 usb_alloc_dev(struct usb_device *parent, struct usb_bus *bus, unsigned port1)
 {
         struct usb_device *dev;
+        struct usb_hcd *usb_hcd = container_of(bus, struct usb_hcd, self);
+        unsigned root_hub = 0;
 
         dev = kzalloc(sizeof(*dev), GFP_KERNEL);
         if (!dev)
@@ -255,12 +266,14 @@ usb_alloc_dev(struct usb_device *parent, struct usb_bus *bus, unsigned port1)
         dev->dev.dma_mask = bus->controller->dma_mask;
         set_dev_node(&dev->dev, dev_to_node(bus->controller));
         dev->state = USB_STATE_ATTACHED;
+        atomic_set(&dev->urbnum, 0);
 
         INIT_LIST_HEAD(&dev->ep0.urb_list);
         dev->ep0.desc.bLength = USB_DT_ENDPOINT_SIZE;
         dev->ep0.desc.bDescriptorType = USB_DT_ENDPOINT;
         /* ep0 maxpacket comes later, from device descriptor */
-        dev->ep_in[0] = dev->ep_out[0] = &dev->ep0;
+        usb_enable_endpoint(dev, &dev->ep0);
+        dev->can_submit = 1;
 
         /* Save readable and stable topology id, distinguishing devices
          * by location for diagnostics, tools, driver model, etc.  The
@@ -275,6 +288,7 @@ usb_alloc_dev(struct usb_device *parent, struct usb_bus *bus, unsigned port1)
 
                 dev->dev.parent = bus->controller;
                 sprintf(&dev->dev.bus_id[0], "usb%d", bus->busnum);
+                root_hub = 1;
         } else {
                 /* match any labeling on the hubs; it's one-based */
                 if (parent->devpath[0] == '0')
@@ -301,6 +315,12 @@ usb_alloc_dev(struct usb_device *parent, struct usb_bus *bus, unsigned port1)
         INIT_DELAYED_WORK(&dev->autosuspend, usb_autosuspend_work);
         dev->autosuspend_delay = usb_autosuspend_delay * HZ;
 #endif
+        if (root_hub)   /* Root hub always ok [and always wired] */
+                dev->authorized = 1;
+        else {
+                dev->authorized = usb_hcd->authorized_default;
+                dev->wusb = usb_bus_is_wusb(bus)? 1 : 0;
+        }
         return dev;
 }
 
@@ -748,7 +768,7 @@ void usb_buffer_unmap(struct urb *urb)
 /**
  * usb_buffer_map_sg - create scatterlist DMA mapping(s) for an endpoint
  * @dev: device to which the scatterlist will be mapped
- * @pipe: endpoint defining the mapping direction
+ * @is_in: mapping transfer direction
  * @sg: the scatterlist to map
  * @nents: the number of entries in the scatterlist
  *
@@ -771,14 +791,13 @@ void usb_buffer_unmap(struct urb *urb)
  *
  * Reverse the effect of this call with usb_buffer_unmap_sg().
  */
-int usb_buffer_map_sg(const struct usb_device *dev, unsigned pipe,
+int usb_buffer_map_sg(const struct usb_device *dev, int is_in,
                       struct scatterlist *sg, int nents)
 {
         struct usb_bus          *bus;
         struct device           *controller;
 
         if (!dev
-                        || usb_pipecontrol(pipe)
                         || !(bus = dev->bus)
                         || !(controller = bus->controller)
                         || !controller->dma_mask)
@@ -786,7 +805,7 @@ int usb_buffer_map_sg(const struct usb_device *dev, unsigned pipe,
 
         // FIXME generic api broken like pci, can't report errors
         return dma_map_sg(controller, sg, nents,
-                        usb_pipein(pipe) ? DMA_FROM_DEVICE : DMA_TO_DEVICE);
+                        is_in ? DMA_FROM_DEVICE : DMA_TO_DEVICE);
 }
 
 /* XXX DISABLED, no users currently.  If you wish to re-enable this
@@ -799,14 +818,14 @@ int usb_buffer_map_sg(const struct usb_device *dev, unsigned pipe,
 /**
  * usb_buffer_dmasync_sg - synchronize DMA and CPU view of scatterlist buffer(s)
  * @dev: device to which the scatterlist will be mapped
- * @pipe: endpoint defining the mapping direction
+ * @is_in: mapping transfer direction
  * @sg: the scatterlist to synchronize
  * @n_hw_ents: the positive return value from usb_buffer_map_sg
  *
  * Use this when you are re-using a scatterlist's data buffers for
  * another USB request.
  */
-void usb_buffer_dmasync_sg(const struct usb_device *dev, unsigned pipe,
+void usb_buffer_dmasync_sg(const struct usb_device *dev, int is_in,
                            struct scatterlist *sg, int n_hw_ents)
 {
         struct usb_bus          *bus;
@@ -819,20 +838,20 @@ void usb_buffer_dmasync_sg(const struct usb_device *dev, unsigned pipe,
                 return;
 
         dma_sync_sg(controller, sg, n_hw_ents,
-                        usb_pipein(pipe) ? DMA_FROM_DEVICE : DMA_TO_DEVICE);
+                        is_in ? DMA_FROM_DEVICE : DMA_TO_DEVICE);
 }
 #endif
 
 /**
  * usb_buffer_unmap_sg - free DMA mapping(s) for a scatterlist
  * @dev: device to which the scatterlist will be mapped
- * @pipe: endpoint defining the mapping direction
+ * @is_in: mapping transfer direction
  * @sg: the scatterlist to unmap
  * @n_hw_ents: the positive return value from usb_buffer_map_sg
  *
  * Reverses the effect of usb_buffer_map_sg().
  */
-void usb_buffer_unmap_sg(const struct usb_device *dev, unsigned pipe,
+void usb_buffer_unmap_sg(const struct usb_device *dev, int is_in,
                          struct scatterlist *sg, int n_hw_ents)
 {
         struct usb_bus          *bus;
@@ -845,7 +864,7 @@ void usb_buffer_unmap_sg(const struct usb_device *dev, unsigned pipe,
                 return;
 
         dma_unmap_sg(controller, sg, n_hw_ents,
-                        usb_pipein(pipe) ? DMA_FROM_DEVICE : DMA_TO_DEVICE);
+                        is_in ? DMA_FROM_DEVICE : DMA_TO_DEVICE);
 }
 
 /* format to disable USB on kernel command line is: nousb */
diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h
index ad5fa0338f49..c52626c51f70 100644
--- a/drivers/usb/core/usb.h
+++ b/drivers/usb/core/usb.h
@@ -8,17 +8,22 @@ extern int usb_create_ep_files(struct device *parent, struct usb_host_endpoint *
                                 struct usb_device *udev);
 extern void usb_remove_ep_files(struct usb_host_endpoint *endpoint);
 
+extern void usb_enable_endpoint(struct usb_device *dev,
+                struct usb_host_endpoint *ep);
 extern void usb_disable_endpoint (struct usb_device *dev, unsigned int epaddr);
 extern void usb_disable_interface (struct usb_device *dev,
                 struct usb_interface *intf);
 extern void usb_release_interface_cache(struct kref *ref);
 extern void usb_disable_device (struct usb_device *dev, int skip_ep0);
+extern int usb_deauthorize_device (struct usb_device *);
+extern int usb_authorize_device (struct usb_device *);
 extern void usb_detect_quirks(struct usb_device *udev);
 
 extern int usb_get_device_descriptor(struct usb_device *dev,
                 unsigned int size);
 extern char *usb_cache_string(struct usb_device *udev, int index);
 extern int usb_set_configuration(struct usb_device *dev, int configuration);
+extern int usb_choose_configuration(struct usb_device *udev);
 
 extern void usb_kick_khubd(struct usb_device *dev);
 extern int usb_match_device(struct usb_device *dev,
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 767aed5b4bea..f81d08d6538b 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -67,6 +67,17 @@ config USB_GADGET_DEBUG_FILES
            driver on a new board.   Enable these files by choosing "Y"
            here.  If in doubt, or to conserve kernel memory, say "N".
 
+config USB_GADGET_DEBUG_FS
+        boolean "Debugging information files in debugfs"
+        depends on USB_GADGET && DEBUG_FS
+        help
+           Some of the drivers in the "gadget" framework can expose
+           debugging information in files under /sys/kernel/debug/.
+           The information in these files may help when you're
+           troubleshooting or bringing up a driver on a new board.
+           Enable these files by choosing "Y" here.  If in doubt, or
+           to conserve kernel memory, say "N".
+
 config  USB_GADGET_SELECTED
         boolean
 
@@ -103,6 +114,20 @@ config USB_AMD5536UDC
         default USB_GADGET
         select USB_GADGET_SELECTED
 
+config USB_GADGET_ATMEL_USBA
+        boolean "Atmel USBA"
+        select USB_GADGET_DUALSPEED
+        depends on AVR32
+        help
+          USBA is the integrated high-speed USB Device controller on
+          the AT32AP700x processors from Atmel.
+
+config USB_ATMEL_USBA
+        tristate
+        depends on USB_GADGET_ATMEL_USBA
+        default USB_GADGET
+        select USB_GADGET_SELECTED
+
 config USB_GADGET_FSL_USB2
         boolean "Freescale Highspeed USB DR Peripheral Controller"
         depends on MPC834x || PPC_MPC831x
@@ -228,7 +253,6 @@ config USB_LH7A40X
         default USB_GADGET
         select USB_GADGET_SELECTED
 
-
 config USB_GADGET_OMAP
         boolean "OMAP USB Device Controller"
         depends on ARCH_OMAP
diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
index 1bc0f03550ce..904e57bf6112 100644
--- a/drivers/usb/gadget/Makefile
+++ b/drivers/usb/gadget/Makefile
@@ -14,6 +14,7 @@ obj-$(CONFIG_USB_OMAP)		+= omap_udc.o
 obj-$(CONFIG_USB_LH7A40X)       += lh7a40x_udc.o
 obj-$(CONFIG_USB_S3C2410)       += s3c2410_udc.o
 obj-$(CONFIG_USB_AT91)          += at91_udc.o
+obj-$(CONFIG_USB_ATMEL_USBA)    += atmel_usba_udc.o
 obj-$(CONFIG_USB_FSL_USB2)      += fsl_usb2_udc.o
 obj-$(CONFIG_USB_M66592)        += m66592-udc.o
 
diff --git a/drivers/usb/gadget/amd5536udc.c b/drivers/usb/gadget/amd5536udc.c
index 714156ca8fe4..1c8040602525 100644
--- a/drivers/usb/gadget/amd5536udc.c
+++ b/drivers/usb/gadget/amd5536udc.c
@@ -69,7 +69,7 @@
 
 /* gadget stack */
 #include <linux/usb/ch9.h>
-#include <linux/usb_gadget.h>
+#include <linux/usb/gadget.h>
 
 /* udc specific */
 #include "amd5536udc.h"
@@ -3244,7 +3244,6 @@ static int udc_pci_probe(
                 retval = -ENOMEM;
                 goto finished;
         }
-        memset(dev, 0, sizeof(struct udc));
 
         /* pci setup */
         if (pci_enable_device(pdev) < 0) {
@@ -3286,14 +3285,12 @@ static int udc_pci_probe(
 
         pci_set_drvdata(pdev, dev);
 
-        /* chip revision */
-        dev->chiprev = 0;
+        /* chip revision for Hs AMD5536 */
+        dev->chiprev = pdev->revision;
 
         pci_set_master(pdev);
         pci_set_mwi(pdev);
 
-        /* chip rev for Hs AMD5536 */
-        pci_read_config_byte(pdev, PCI_REVISION_ID, (u8 *) &dev->chiprev);
         /* init dma pools */
         if (use_dma) {
                 retval = init_dma_pools(dev);
diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
index 63d7d6568699..a6adf7e0f6f8 100644
--- a/drivers/usb/gadget/at91_udc.c
+++ b/drivers/usb/gadget/at91_udc.c
@@ -38,7 +38,7 @@
 #include <linux/proc_fs.h>
 #include <linux/clk.h>
 #include <linux/usb/ch9.h>
-#include <linux/usb_gadget.h>
+#include <linux/usb/gadget.h>
 
 #include <asm/byteorder.h>
 #include <asm/hardware.h>
diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c
new file mode 100644
index 000000000000..4fb5ff469574
--- /dev/null
+++ b/drivers/usb/gadget/atmel_usba_udc.c
@@ -0,0 +1,2077 @@
+/*
+ * Driver for the Atmel USBA high speed USB device controller
+ *
+ * Copyright (C) 2005-2007 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/clk.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/list.h>
+#include <linux/platform_device.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/delay.h>
+
+#include <asm/gpio.h>
+#include <asm/arch/board.h>
+
+#include "atmel_usba_udc.h"
+
+
+static struct usba_udc the_udc;
+
+#ifdef CONFIG_USB_GADGET_DEBUG_FS
+#include <linux/debugfs.h>
+#include <linux/uaccess.h>
+
+static int queue_dbg_open(struct inode *inode, struct file *file)
+{
+        struct usba_ep *ep = inode->i_private;
+        struct usba_request *req, *req_copy;
+        struct list_head *queue_data;
+
+        queue_data = kmalloc(sizeof(*queue_data), GFP_KERNEL);
+        if (!queue_data)
+                return -ENOMEM;
+        INIT_LIST_HEAD(queue_data);
+
+        spin_lock_irq(&ep->udc->lock);
+        list_for_each_entry(req, &ep->queue, queue) {
+                req_copy = kmalloc(sizeof(*req_copy), GFP_ATOMIC);
+                if (!req_copy)
+                        goto fail;
+                memcpy(req_copy, req, sizeof(*req_copy));
+                list_add_tail(&req_copy->queue, queue_data);
+        }
+        spin_unlock_irq(&ep->udc->lock);
+
+        file->private_data = queue_data;
+        return 0;
+
+fail:
+        spin_unlock_irq(&ep->udc->lock);
+        list_for_each_entry_safe(req, req_copy, queue_data, queue) {
+                list_del(&req->queue);
+                kfree(req);
+        }
+        kfree(queue_data);
+        return -ENOMEM;
+}
+
+/*
+ * bbbbbbbb llllllll IZS sssss nnnn FDL\n\0
+ *
+ * b: buffer address
+ * l: buffer length
+ * I/i: interrupt/no interrupt
+ * Z/z: zero/no zero
+ * S/s: short ok/short not ok
+ * s: status
+ * n: nr_packets
+ * F/f: submitted/not submitted to FIFO
+ * D/d: using/not using DMA
+ * L/l: last transaction/not last transaction
+ */
+static ssize_t queue_dbg_read(struct file *file, char __user *buf,
+                size_t nbytes, loff_t *ppos)
+{
+        struct list_head *queue = file->private_data;
+        struct usba_request *req, *tmp_req;
+        size_t len, remaining, actual = 0;
+        char tmpbuf[38];
+
+        if (!access_ok(VERIFY_WRITE, buf, nbytes))
+                return -EFAULT;
+
+        mutex_lock(&file->f_dentry->d_inode->i_mutex);
+        list_for_each_entry_safe(req, tmp_req, queue, queue) {
+                len = snprintf(tmpbuf, sizeof(tmpbuf),
+                                "%8p %08x %c%c%c %5d %c%c%c\n",
+                                req->req.buf, req->req.length,
+                                req->req.no_interrupt ? 'i' : 'I',
+                                req->req.zero ? 'Z' : 'z',
+                                req->req.short_not_ok ? 's' : 'S',
+                                req->req.status,
+                                req->submitted ? 'F' : 'f',
+                                req->using_dma ? 'D' : 'd',
+                                req->last_transaction ? 'L' : 'l');
+                len = min(len, sizeof(tmpbuf));
+                if (len > nbytes)
+                        break;
+
+                list_del(&req->queue);
+                kfree(req);
+
+                remaining = __copy_to_user(buf, tmpbuf, len);
+                actual += len - remaining;
+                if (remaining)
+                        break;
+
+                nbytes -= len;
+                buf += len;
+        }
+        mutex_unlock(&file->f_dentry->d_inode->i_mutex);
+
+        return actual;
+}
+
+static int queue_dbg_release(struct inode *inode, struct file *file)
+{
+        struct list_head *queue_data = file->private_data;
+        struct usba_request *req, *tmp_req;
+
+        list_for_each_entry_safe(req, tmp_req, queue_data, queue) {
+                list_del(&req->queue);
+                kfree(req);
+        }
+        kfree(queue_data);
+        return 0;
+}
+
+static int regs_dbg_open(struct inode *inode, struct file *file)
+{
+        struct usba_udc *udc;
+        unsigned int i;
+        u32 *data;
+        int ret = -ENOMEM;
+
+        mutex_lock(&inode->i_mutex);
+        udc = inode->i_private;
+        data = kmalloc(inode->i_size, GFP_KERNEL);
+        if (!data)
+                goto out;
+
+        spin_lock_irq(&udc->lock);
+        for (i = 0; i < inode->i_size / 4; i++)
+                data[i] = __raw_readl(udc->regs + i * 4);
+        spin_unlock_irq(&udc->lock);
+
+        file->private_data = data;
+        ret = 0;
+
+out:
+        mutex_unlock(&inode->i_mutex);
+
+        return ret;
+}
+
+static ssize_t regs_dbg_read(struct file *file, char __user *buf,
+                size_t nbytes, loff_t *ppos)
+{
+        struct inode *inode = file->f_dentry->d_inode;
+        int ret;
+
+        mutex_lock(&inode->i_mutex);
+        ret = simple_read_from_buffer(buf, nbytes, ppos,
+                        file->private_data,
+                        file->f_dentry->d_inode->i_size);
+        mutex_unlock(&inode->i_mutex);
+
+        return ret;
+}
+
+static int regs_dbg_release(struct inode *inode, struct file *file)
+{
+        kfree(file->private_data);
+        return 0;
+}
+
+const struct file_operations queue_dbg_fops = {
+        .owner          = THIS_MODULE,
+        .open           = queue_dbg_open,
+        .llseek         = no_llseek,
+        .read           = queue_dbg_read,
+        .release        = queue_dbg_release,
+};
+
+const struct file_operations regs_dbg_fops = {
+        .owner          = THIS_MODULE,
+        .open           = regs_dbg_open,
+        .llseek         = generic_file_llseek,
+        .read           = regs_dbg_read,
+        .release        = regs_dbg_release,
+};
+
+static void usba_ep_init_debugfs(struct usba_udc *udc,
+                struct usba_ep *ep)
+{
+        struct dentry *ep_root;
+
+        ep_root = debugfs_create_dir(ep->ep.name, udc->debugfs_root);
+        if (!ep_root)
+                goto err_root;
+        ep->debugfs_dir = ep_root;
+
+        ep->debugfs_queue = debugfs_create_file("queue", 0400, ep_root,
+                                                ep, &queue_dbg_fops);
+        if (!ep->debugfs_queue)
+                goto err_queue;
+
+        if (ep->can_dma) {
+                ep->debugfs_dma_status
+                        = debugfs_create_u32("dma_status", 0400, ep_root,
+                                        &ep->last_dma_status);
+                if (!ep->debugfs_dma_status)
+                        goto err_dma_status;
+        }
+        if (ep_is_control(ep)) {
+                ep->debugfs_state
+                        = debugfs_create_u32("state", 0400, ep_root,
+                                        &ep->state);
+                if (!ep->debugfs_state)
+                        goto err_state;
+        }
+
+        return;
+
+err_state:
+        if (ep->can_dma)
+                debugfs_remove(ep->debugfs_dma_status);
+err_dma_status:
+        debugfs_remove(ep->debugfs_queue);
+err_queue:
+        debugfs_remove(ep_root);
+err_root:
+        dev_err(&ep->udc->pdev->dev,
+                "failed to create debugfs directory for %s\n", ep->ep.name);
+}
+
+static void usba_ep_cleanup_debugfs(struct usba_ep *ep)
+{
+        debugfs_remove(ep->debugfs_queue);
+        debugfs_remove(ep->debugfs_dma_status);
+        debugfs_remove(ep->debugfs_state);
+        debugfs_remove(ep->debugfs_dir);
+        ep->debugfs_dma_status = NULL;
+        ep->debugfs_dir = NULL;
+}
+
+static void usba_init_debugfs(struct usba_udc *udc)
+{
+        struct dentry *root, *regs;
+        struct resource *regs_resource;
+
+        root = debugfs_create_dir(udc->gadget.name, NULL);
+        if (IS_ERR(root) || !root)
+                goto err_root;
+        udc->debugfs_root = root;
+
+        regs = debugfs_create_file("regs", 0400, root, udc, &regs_dbg_fops);
+        if (!regs)
+                goto err_regs;
+
+        regs_resource = platform_get_resource(udc->pdev, IORESOURCE_MEM,
+                                CTRL_IOMEM_ID);
+        regs->d_inode->i_size = regs_resource->end - regs_resource->start + 1;
+        udc->debugfs_regs = regs;
+
+        usba_ep_init_debugfs(udc, to_usba_ep(udc->gadget.ep0));
+
+        return;
+
+err_regs:
+        debugfs_remove(root);
+err_root:
+        udc->debugfs_root = NULL;
+        dev_err(&udc->pdev->dev, "debugfs is not available\n");
+}
+
+static void usba_cleanup_debugfs(struct usba_udc *udc)
+{
+        usba_ep_cleanup_debugfs(to_usba_ep(udc->gadget.ep0));
+        debugfs_remove(udc->debugfs_regs);
+        debugfs_remove(udc->debugfs_root);
+        udc->debugfs_regs = NULL;
+        udc->debugfs_root = NULL;
+}
+#else
+static inline void usba_ep_init_debugfs(struct usba_udc *udc,
+                                         struct usba_ep *ep)
+{
+
+}
+
+static inline void usba_ep_cleanup_debugfs(struct usba_ep *ep)
+{
+
+}
+
+static inline void usba_init_debugfs(struct usba_udc *udc)
+{
+
+}
+
+static inline void usba_cleanup_debugfs(struct usba_udc *udc)
+{
+
+}
+#endif
+
+static int vbus_is_present(struct usba_udc *udc)
+{
+        if (udc->vbus_pin != -1)
+                return gpio_get_value(udc->vbus_pin);
+
+        /* No Vbus detection: Assume always present */
+        return 1;
+}
+
+static void copy_to_fifo(void __iomem *fifo, const void *buf, int len)
+{
+        unsigned long tmp;
+
+        DBG(DBG_FIFO, "copy to FIFO (len %d):\n", len);
+        for (; len > 0; len -= 4, buf += 4, fifo += 4) {
+                tmp = *(unsigned long *)buf;
+                if (len >= 4) {
+                        DBG(DBG_FIFO, "  -> %08lx\n", tmp);
+                        __raw_writel(tmp, fifo);
+                } else {
+                        do {
+                                DBG(DBG_FIFO, "  -> %02lx\n", tmp >> 24);
+                                __raw_writeb(tmp >> 24, fifo);
+                                fifo++;
+                                tmp <<= 8;
+                        } while (--len);
+                        break;
+                }
+        }
+}
+
+static void copy_from_fifo(void *buf, void __iomem *fifo, int len)
+{
+        union {
+                unsigned long *w;
+                unsigned char *b;
+        } p;
+        unsigned long tmp;
+
+        DBG(DBG_FIFO, "copy from FIFO (len %d):\n", len);
+        for (p.w = buf; len > 0; len -= 4, p.w++, fifo += 4) {
+                if (len >= 4) {
+                        tmp = __raw_readl(fifo);
+                        *p.w = tmp;
+                        DBG(DBG_FIFO, "  -> %08lx\n", tmp);
+                } else {
+                        do {
+                                tmp = __raw_readb(fifo);
+                                *p.b = tmp;
+                                DBG(DBG_FIFO, " -> %02lx\n", tmp);
+                                fifo++, p.b++;
+                        } while (--len);
+                }
+        }
+}
+
+static void next_fifo_transaction(struct usba_ep *ep, struct usba_request *req)
+{
+        unsigned int transaction_len;
+
+        transaction_len = req->req.length - req->req.actual;
+        req->last_transaction = 1;
+        if (transaction_len > ep->ep.maxpacket) {
+                transaction_len = ep->ep.maxpacket;
+                req->last_transaction = 0;
+        } else if (transaction_len == ep->ep.maxpacket && req->req.zero)
+                req->last_transaction = 0;
+
+        DBG(DBG_QUEUE, "%s: submit_transaction, req %p (length %d)%s\n",
+                ep->ep.name, req, transaction_len,
+                req->last_transaction ? ", done" : "");
+
+        copy_to_fifo(ep->fifo, req->req.buf + req->req.actual, transaction_len);
+        usba_ep_writel(ep, SET_STA, USBA_TX_PK_RDY);
+        req->req.actual += transaction_len;
+}
+
+static void submit_request(struct usba_ep *ep, struct usba_request *req)
+{
+        DBG(DBG_QUEUE, "%s: submit_request: req %p (length %d)\n",
+                ep->ep.name, req, req->req.length);
+
+        req->req.actual = 0;
+        req->submitted = 1;
+
+        if (req->using_dma) {
+                if (req->req.length == 0) {
+                        usba_ep_writel(ep, CTL_ENB, USBA_TX_PK_RDY);
+                        return;
+                }
+
+                if (req->req.zero)
+                        usba_ep_writel(ep, CTL_ENB, USBA_SHORT_PACKET);
+                else
+                        usba_ep_writel(ep, CTL_DIS, USBA_SHORT_PACKET);
+
+                usba_dma_writel(ep, ADDRESS, req->req.dma);
+                usba_dma_writel(ep, CONTROL, req->ctrl);
+        } else {
+                next_fifo_transaction(ep, req);
+                if (req->last_transaction) {
+                        usba_ep_writel(ep, CTL_DIS, USBA_TX_PK_RDY);
+                        usba_ep_writel(ep, CTL_ENB, USBA_TX_COMPLETE);
+                } else {
+                        usba_ep_writel(ep, CTL_DIS, USBA_TX_COMPLETE);
+                        usba_ep_writel(ep, CTL_ENB, USBA_TX_PK_RDY);
+                }
+        }
+}
+
+static void submit_next_request(struct usba_ep *ep)
+{
+        struct usba_request *req;
+
+        if (list_empty(&ep->queue)) {
+                usba_ep_writel(ep, CTL_DIS, USBA_TX_PK_RDY | USBA_RX_BK_RDY);
+                return;
+        }
+
+        req = list_entry(ep->queue.next, struct usba_request, queue);
+        if (!req->submitted)
+                submit_request(ep, req);
+}
+
+static void send_status(struct usba_udc *udc, struct usba_ep *ep)
+{
+        ep->state = STATUS_STAGE_IN;
+        usba_ep_writel(ep, SET_STA, USBA_TX_PK_RDY);
+        usba_ep_writel(ep, CTL_ENB, USBA_TX_COMPLETE);
+}
+
+static void receive_data(struct usba_ep *ep)
+{
+        struct usba_udc *udc = ep->udc;
+        struct usba_request *req;
+        unsigned long status;
+        unsigned int bytecount, nr_busy;
+        int is_complete = 0;
+
+        status = usba_ep_readl(ep, STA);
+        nr_busy = USBA_BFEXT(BUSY_BANKS, status);
+
+        DBG(DBG_QUEUE, "receive data: nr_busy=%u\n", nr_busy);
+
+        while (nr_busy > 0) {
+                if (list_empty(&ep->queue)) {
+                        usba_ep_writel(ep, CTL_DIS, USBA_RX_BK_RDY);
+                        break;
+                }
+                req = list_entry(ep->queue.next,
+                                 struct usba_request, queue);
+
+                bytecount = USBA_BFEXT(BYTE_COUNT, status);
+
+                if (status & (1 << 31))
+                        is_complete = 1;
+                if (req->req.actual + bytecount >= req->req.length) {
+                        is_complete = 1;
+                        bytecount = req->req.length - req->req.actual;
+                }
+
+                copy_from_fifo(req->req.buf + req->req.actual,
+                                ep->fifo, bytecount);
+                req->req.actual += bytecount;
+
+                usba_ep_writel(ep, CLR_STA, USBA_RX_BK_RDY);
+
+                if (is_complete) {
+                        DBG(DBG_QUEUE, "%s: request done\n", ep->ep.name);
+                        req->req.status = 0;
+                        list_del_init(&req->queue);
+                        usba_ep_writel(ep, CTL_DIS, USBA_RX_BK_RDY);
+                        spin_unlock(&udc->lock);
+                        req->req.complete(&ep->ep, &req->req);
+                        spin_lock(&udc->lock);
+                }
+
+                status = usba_ep_readl(ep, STA);
+                nr_busy = USBA_BFEXT(BUSY_BANKS, status);
+
+                if (is_complete && ep_is_control(ep)) {
+                        send_status(udc, ep);
+                        break;
+                }
+        }
+}
+
+static void
+request_complete(struct usba_ep *ep, struct usba_request *req, int status)
+{
+        struct usba_udc *udc = ep->udc;
+
+        WARN_ON(!list_empty(&req->queue));
+
+        if (req->req.status == -EINPROGRESS)
+                req->req.status = status;
+
+        if (req->mapped) {
+                dma_unmap_single(
+                        &udc->pdev->dev, req->req.dma, req->req.length,
+                        ep->is_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
+                req->req.dma = DMA_ADDR_INVALID;
+                req->mapped = 0;
+        }
+
+        DBG(DBG_GADGET | DBG_REQ,
+                "%s: req %p complete: status %d, actual %u\n",
+                ep->ep.name, req, req->req.status, req->req.actual);
+
+        spin_unlock(&udc->lock);
+        req->req.complete(&ep->ep, &req->req);
+        spin_lock(&udc->lock);
+}
+
+static void
+request_complete_list(struct usba_ep *ep, struct list_head *list, int status)
+{
+        struct usba_request *req, *tmp_req;
+
+        list_for_each_entry_safe(req, tmp_req, list, queue) {
+                list_del_init(&req->queue);
+                request_complete(ep, req, status);
+        }
+}
+
+static int
+usba_ep_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
+{
+        struct usba_ep *ep = to_usba_ep(_ep);
+        struct usba_udc *udc = ep->udc;
+        unsigned long flags, ept_cfg, maxpacket;
+        unsigned int nr_trans;
+
+        DBG(DBG_GADGET, "%s: ep_enable: desc=%p\n", ep->ep.name, desc);
+
+        maxpacket = le16_to_cpu(desc->wMaxPacketSize) & 0x7ff;
+
+        if (((desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK) != ep->index)
+                        || ep->index == 0
+                        || desc->bDescriptorType != USB_DT_ENDPOINT
+                        || maxpacket == 0
+                        || maxpacket > ep->fifo_size) {
+                DBG(DBG_ERR, "ep_enable: Invalid argument");
+                return -EINVAL;
+        }
+
+        ep->is_isoc = 0;
+        ep->is_in = 0;
+
+        if (maxpacket <= 8)
+                ept_cfg = USBA_BF(EPT_SIZE, USBA_EPT_SIZE_8);
+        else
+                /* LSB is bit 1, not 0 */
+                ept_cfg = USBA_BF(EPT_SIZE, fls(maxpacket - 1) - 3);
+
+        DBG(DBG_HW, "%s: EPT_SIZE = %lu (maxpacket = %lu)\n",
+                        ep->ep.name, ept_cfg, maxpacket);
+
+        if ((desc->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) {
+                ep->is_in = 1;
+                ept_cfg |= USBA_EPT_DIR_IN;
+        }
+
+        switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
+        case USB_ENDPOINT_XFER_CONTROL:
+                ept_cfg |= USBA_BF(EPT_TYPE, USBA_EPT_TYPE_CONTROL);
+                ept_cfg |= USBA_BF(BK_NUMBER, USBA_BK_NUMBER_ONE);
+                break;
+        case USB_ENDPOINT_XFER_ISOC:
+                if (!ep->can_isoc) {
+                        DBG(DBG_ERR, "ep_enable: %s is not isoc capable\n",
+                                        ep->ep.name);
+                        return -EINVAL;
+                }
+
+                /*
+                 * Bits 11:12 specify number of _additional_
+                 * transactions per microframe.
+                 */
+                nr_trans = ((le16_to_cpu(desc->wMaxPacketSize) >> 11) & 3) + 1;
+                if (nr_trans > 3)
+                        return -EINVAL;
+
+                ep->is_isoc = 1;
+                ept_cfg |= USBA_BF(EPT_TYPE, USBA_EPT_TYPE_ISO);
+
+                /*
+                 * Do triple-buffering on high-bandwidth iso endpoints.
+                 */
+                if (nr_trans > 1 && ep->nr_banks == 3)
+                        ept_cfg |= USBA_BF(BK_NUMBER, USBA_BK_NUMBER_TRIPLE);
+                else
+                        ept_cfg |= USBA_BF(BK_NUMBER, USBA_BK_NUMBER_DOUBLE);
+                ept_cfg |= USBA_BF(NB_TRANS, nr_trans);
+                break;
+        case USB_ENDPOINT_XFER_BULK:
+                ept_cfg |= USBA_BF(EPT_TYPE, USBA_EPT_TYPE_BULK);
+                ept_cfg |= USBA_BF(BK_NUMBER, USBA_BK_NUMBER_DOUBLE);
+                break;
+        case USB_ENDPOINT_XFER_INT:
+                ept_cfg |= USBA_BF(EPT_TYPE, USBA_EPT_TYPE_INT);
+                ept_cfg |= USBA_BF(BK_NUMBER, USBA_BK_NUMBER_DOUBLE);
+                break;
+        }
+
+        spin_lock_irqsave(&ep->udc->lock, flags);
+
+        if (ep->desc) {
+                spin_unlock_irqrestore(&ep->udc->lock, flags);
+                DBG(DBG_ERR, "ep%d already enabled\n", ep->index);
+                return -EBUSY;
+        }
+
+        ep->desc = desc;
+        ep->ep.maxpacket = maxpacket;
+
+        usba_ep_writel(ep, CFG, ept_cfg);
+        usba_ep_writel(ep, CTL_ENB, USBA_EPT_ENABLE);
+
+        if (ep->can_dma) {
+                u32 ctrl;
+
+                usba_writel(udc, INT_ENB,
+                                (usba_readl(udc, INT_ENB)
+                                        | USBA_BF(EPT_INT, 1 << ep->index)
+                                        | USBA_BF(DMA_INT, 1 << ep->index)));
+                ctrl = USBA_AUTO_VALID | USBA_INTDIS_DMA;
+                usba_ep_writel(ep, CTL_ENB, ctrl);
+        } else {
+                usba_writel(udc, INT_ENB,
+                                (usba_readl(udc, INT_ENB)
+                                        | USBA_BF(EPT_INT, 1 << ep->index)));
+        }
+
+        spin_unlock_irqrestore(&udc->lock, flags);
+
+        DBG(DBG_HW, "EPT_CFG%d after init: %#08lx\n", ep->index,
+                        (unsigned long)usba_ep_readl(ep, CFG));
+        DBG(DBG_HW, "INT_ENB after init: %#08lx\n",
+                        (unsigned long)usba_readl(udc, INT_ENB));
+
+        return 0;
+}
+
+static int usba_ep_disable(struct usb_ep *_ep)
+{
+        struct usba_ep *ep = to_usba_ep(_ep);
+        struct usba_udc *udc = ep->udc;
+        LIST_HEAD(req_list);
+        unsigned long flags;
+
+        DBG(DBG_GADGET, "ep_disable: %s\n", ep->ep.name);
+
+        spin_lock_irqsave(&udc->lock, flags);
+
+        if (!ep->desc) {
+                spin_unlock_irqrestore(&udc->lock, flags);
+                DBG(DBG_ERR, "ep_disable: %s not enabled\n", ep->ep.name);
+                return -EINVAL;
+        }
+        ep->desc = NULL;
+
+        list_splice_init(&ep->queue, &req_list);
+        if (ep->can_dma) {
+                usba_dma_writel(ep, CONTROL, 0);
+                usba_dma_writel(ep, ADDRESS, 0);
+                usba_dma_readl(ep, STATUS);
+        }
+        usba_ep_writel(ep, CTL_DIS, USBA_EPT_ENABLE);
+        usba_writel(udc, INT_ENB,
+                        usba_readl(udc, INT_ENB)
+                        & ~USBA_BF(EPT_INT, 1 << ep->index));
+
+        request_complete_list(ep, &req_list, -ESHUTDOWN);
+
+        spin_unlock_irqrestore(&udc->lock, flags);
+
+        return 0;
+}
+
+static struct usb_request *
+usba_ep_alloc_request(struct usb_ep *_ep, gfp_t gfp_flags)
+{
+        struct usba_request *req;
+
+        DBG(DBG_GADGET, "ep_alloc_request: %p, 0x%x\n", _ep, gfp_flags);
+
+        req = kzalloc(sizeof(*req), gfp_flags);
+        if (!req)
+                return NULL;
+
+        INIT_LIST_HEAD(&req->queue);
+        req->req.dma = DMA_ADDR_INVALID;
+
+        return &req->req;
+}
+
+static void
+usba_ep_free_request(struct usb_ep *_ep, struct usb_request *_req)
+{
+        struct usba_request *req = to_usba_req(_req);
+
+        DBG(DBG_GADGET, "ep_free_request: %p, %p\n", _ep, _req);
+
+        kfree(req);
+}
+
+static int queue_dma(struct usba_udc *udc, struct usba_ep *ep,
+                struct usba_request *req, gfp_t gfp_flags)
+{
+        unsigned long flags;
+        int ret;
+
+        DBG(DBG_DMA, "%s: req l/%u d/%08x %c%c%c\n",
+                ep->ep.name, req->req.length, req->req.dma,
+                req->req.zero ? 'Z' : 'z',
+                req->req.short_not_ok ? 'S' : 's',
+                req->req.no_interrupt ? 'I' : 'i');
+
+        if (req->req.length > 0x10000) {
+                /* Lengths from 0 to 65536 (inclusive) are supported */
+                DBG(DBG_ERR, "invalid request length %u\n", req->req.length);
+                return -EINVAL;
+        }
+
+        req->using_dma = 1;
+
+        if (req->req.dma == DMA_ADDR_INVALID) {
+                req->req.dma = dma_map_single(
+                        &udc->pdev->dev, req->req.buf, req->req.length,
+                        ep->is_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
+                req->mapped = 1;
+        } else {
+                dma_sync_single_for_device(
+                        &udc->pdev->dev, req->req.dma, req->req.length,
+                        ep->is_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
+                req->mapped = 0;
+        }
+
+        req->ctrl = USBA_BF(DMA_BUF_LEN, req->req.length)
+                        | USBA_DMA_CH_EN | USBA_DMA_END_BUF_IE
+                        | USBA_DMA_END_TR_EN | USBA_DMA_END_TR_IE;
+
+        if (ep->is_in)
+                req->ctrl |= USBA_DMA_END_BUF_EN;
+
+        /*
+         * Add this request to the queue and submit for DMA if
+         * possible. Check if we're still alive first -- we may have
+         * received a reset since last time we checked.
+         */
+        ret = -ESHUTDOWN;
+        spin_lock_irqsave(&udc->lock, flags);
+        if (ep->desc) {
+                if (list_empty(&ep->queue))
+                        submit_request(ep, req);
+
+                list_add_tail(&req->queue, &ep->queue);
+                ret = 0;
+        }
+        spin_unlock_irqrestore(&udc->lock, flags);
+
+        return ret;
+}
+
+static int
+usba_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
+{
+        struct usba_request *req = to_usba_req(_req);
+        struct usba_ep *ep = to_usba_ep(_ep);
+        struct usba_udc *udc = ep->udc;
+        unsigned long flags;
+        int ret;
+
+        DBG(DBG_GADGET | DBG_QUEUE | DBG_REQ, "%s: queue req %p, len %u\n",
+                        ep->ep.name, req, _req->length);
+
+        if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN || !ep->desc)
+                return -ESHUTDOWN;
+
+        req->submitted = 0;
+        req->using_dma = 0;
+        req->last_transaction = 0;
+
+        _req->status = -EINPROGRESS;
+        _req->actual = 0;
+
+        if (ep->can_dma)
+                return queue_dma(udc, ep, req, gfp_flags);
+
+        /* May have received a reset since last time we checked */
+        ret = -ESHUTDOWN;
+        spin_lock_irqsave(&udc->lock, flags);
+        if (ep->desc) {
+                list_add_tail(&req->queue, &ep->queue);
+
+                if (ep->is_in || (ep_is_control(ep)
+                                && (ep->state == DATA_STAGE_IN
+                                        || ep->state == STATUS_STAGE_IN)))
+                        usba_ep_writel(ep, CTL_ENB, USBA_TX_PK_RDY);
+                else
+                        usba_ep_writel(ep, CTL_ENB, USBA_RX_BK_RDY);
+                ret = 0;
+        }
+        spin_unlock_irqrestore(&udc->lock, flags);
+
+        return ret;
+}
+
+static void
+usba_update_req(struct usba_ep *ep, struct usba_request *req, u32 status)
+{
+        req->req.actual = req->req.length - USBA_BFEXT(DMA_BUF_LEN, status);
+}
+
+static int stop_dma(struct usba_ep *ep, u32 *pstatus)
+{
+        unsigned int timeout;
+        u32 status;
+
+        /*
+         * Stop the DMA controller. When writing both CH_EN
+         * and LINK to 0, the other bits are not affected.
+         */
+        usba_dma_writel(ep, CONTROL, 0);
+
+        /* Wait for the FIFO to empty */
+        for (timeout = 40; timeout; --timeout) {
+                status = usba_dma_readl(ep, STATUS);
+                if (!(status & USBA_DMA_CH_EN))
+                        break;
+                udelay(1);
+        }
+
+        if (pstatus)
+                *pstatus = status;
+
+        if (timeout == 0) {
+                dev_err(&ep->udc->pdev->dev,
+                        "%s: timed out waiting for DMA FIFO to empty\n",
+                        ep->ep.name);
+                return -ETIMEDOUT;
+        }
+
+        return 0;
+}
+
+static int usba_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
+{
+        struct usba_ep *ep = to_usba_ep(_ep);
+        struct usba_udc *udc = ep->udc;
+        struct usba_request *req = to_usba_req(_req);
+        unsigned long flags;
+        u32 status;
+
+        DBG(DBG_GADGET | DBG_QUEUE, "ep_dequeue: %s, req %p\n",
+                        ep->ep.name, req);
+
+        spin_lock_irqsave(&udc->lock, flags);
+
+        if (req->using_dma) {
+                /*
+                 * If this request is currently being transferred,
+                 * stop the DMA controller and reset the FIFO.
+                 */
+                if (ep->queue.next == &req->queue) {
+                        status = usba_dma_readl(ep, STATUS);
+                        if (status & USBA_DMA_CH_EN)
+                                stop_dma(ep, &status);
+
+#ifdef CONFIG_USB_GADGET_DEBUG_FS
+                        ep->last_dma_status = status;
+#endif
+
+                        usba_writel(udc, EPT_RST, 1 << ep->index);
+
+                        usba_update_req(ep, req, status);
+                }
+        }
+
+        /*
+         * Errors should stop the queue from advancing until the
+         * completion function returns.
+         */
+        list_del_init(&req->queue);
+
+        request_complete(ep, req, -ECONNRESET);
+
+        /* Process the next request if any */
+        submit_next_request(ep);
+        spin_unlock_irqrestore(&udc->lock, flags);
+
+        return 0;
+}
+
+static int usba_ep_set_halt(struct usb_ep *_ep, int value)
+{
+        struct usba_ep *ep = to_usba_ep(_ep);
+        struct usba_udc *udc = ep->udc;
+        unsigned long flags;
+        int ret = 0;
+
+        DBG(DBG_GADGET, "endpoint %s: %s HALT\n", ep->ep.name,
+                        value ? "set" : "clear");
+
+        if (!ep->desc) {
+                DBG(DBG_ERR, "Attempted to halt uninitialized ep %s\n",
+                                ep->ep.name);
+                return -ENODEV;
+        }
+        if (ep->is_isoc) {
+                DBG(DBG_ERR, "Attempted to halt isochronous ep %s\n",
+                                ep->ep.name);
+                return -ENOTTY;
+        }
+
+        spin_lock_irqsave(&udc->lock, flags);
+
+        /*
+         * We can't halt IN endpoints while there are still data to be
+         * transferred
+         */
+        if (!list_empty(&ep->queue)
+                        || ((value && ep->is_in && (usba_ep_readl(ep, STA)
+                                        & USBA_BF(BUSY_BANKS, -1L))))) {
+                ret = -EAGAIN;
+        } else {
+                if (value)
+                        usba_ep_writel(ep, SET_STA, USBA_FORCE_STALL);
+                else
+                        usba_ep_writel(ep, CLR_STA,
+                                        USBA_FORCE_STALL | USBA_TOGGLE_CLR);
+                usba_ep_readl(ep, STA);
+        }
+
+        spin_unlock_irqrestore(&udc->lock, flags);
+
+        return ret;
+}
+
+static int usba_ep_fifo_status(struct usb_ep *_ep)
+{
+        struct usba_ep *ep = to_usba_ep(_ep);
+
+        return USBA_BFEXT(BYTE_COUNT, usba_ep_readl(ep, STA));
+}
+
+static void usba_ep_fifo_flush(struct usb_ep *_ep)
+{
+        struct usba_ep *ep = to_usba_ep(_ep);
+        struct usba_udc *udc = ep->udc;
+
+        usba_writel(udc, EPT_RST, 1 << ep->index);
+}
+
+static const struct usb_ep_ops usba_ep_ops = {
+        .enable         = usba_ep_enable,
+        .disable        = usba_ep_disable,
+        .alloc_request  = usba_ep_alloc_request,
+        .free_request   = usba_ep_free_request,
+        .queue          = usba_ep_queue,
+        .dequeue        = usba_ep_dequeue,
+        .set_halt       = usba_ep_set_halt,
+        .fifo_status    = usba_ep_fifo_status,
+        .fifo_flush     = usba_ep_fifo_flush,
+};
+
+static int usba_udc_get_frame(struct usb_gadget *gadget)
+{
+        struct usba_udc *udc = to_usba_udc(gadget);
+
+        return USBA_BFEXT(FRAME_NUMBER, usba_readl(udc, FNUM));
+}
+
+static int usba_udc_wakeup(struct usb_gadget *gadget)
+{
+        struct usba_udc *udc = to_usba_udc(gadget);
+        unsigned long flags;
+        u32 ctrl;
+        int ret = -EINVAL;
+
+        spin_lock_irqsave(&udc->lock, flags);
+        if (udc->devstatus & (1 << USB_DEVICE_REMOTE_WAKEUP)) {
+                ctrl = usba_readl(udc, CTRL);
+                usba_writel(udc, CTRL, ctrl | USBA_REMOTE_WAKE_UP);
+                ret = 0;
+        }
+        spin_unlock_irqrestore(&udc->lock, flags);
+
+        return ret;
+}
+
+static int
+usba_udc_set_selfpowered(struct usb_gadget *gadget, int is_selfpowered)
+{
+        struct usba_udc *udc = to_usba_udc(gadget);
+        unsigned long flags;
+
+        spin_lock_irqsave(&udc->lock, flags);
+        if (is_selfpowered)
+                udc->devstatus |= 1 << USB_DEVICE_SELF_POWERED;
+        else
+                udc->devstatus &= ~(1 << USB_DEVICE_SELF_POWERED);
+        spin_unlock_irqrestore(&udc->lock, flags);
+
+        return 0;
+}
+
+static const struct usb_gadget_ops usba_udc_ops = {
+        .get_frame              = usba_udc_get_frame,
+        .wakeup                 = usba_udc_wakeup,
+        .set_selfpowered        = usba_udc_set_selfpowered,
+};
+
+#define EP(nam, idx, maxpkt, maxbk, dma, isoc)                  \
+{                                                               \
+        .ep     = {                                             \
+                .ops            = &usba_ep_ops,                 \
+                .name           = nam,                          \
+                .maxpacket      = maxpkt,                       \
+        },                                                      \
+        .udc            = &the_udc,                             \
+        .queue          = LIST_HEAD_INIT(usba_ep[idx].queue),   \
+        .fifo_size      = maxpkt,                               \
+        .nr_banks       = maxbk,                                \
+        .index          = idx,                                  \
+        .can_dma        = dma,                                  \
+        .can_isoc       = isoc,                                 \
+}
+
+static struct usba_ep usba_ep[] = {
+        EP("ep0", 0, 64, 1, 0, 0),
+        EP("ep1in-bulk", 1, 512, 2, 1, 1),
+        EP("ep2out-bulk", 2, 512, 2, 1, 1),
+        EP("ep3in-int", 3, 64, 3, 1, 0),
+        EP("ep4out-int", 4, 64, 3, 1, 0),
+        EP("ep5in-iso", 5, 1024, 3, 1, 1),
+        EP("ep6out-iso", 6, 1024, 3, 1, 1),
+};
+#undef EP
+
+static struct usb_endpoint_descriptor usba_ep0_desc = {
+        .bLength = USB_DT_ENDPOINT_SIZE,
+        .bDescriptorType = USB_DT_ENDPOINT,
+        .bEndpointAddress = 0,
+        .bmAttributes = USB_ENDPOINT_XFER_CONTROL,
+        .wMaxPacketSize = __constant_cpu_to_le16(64),
+        /* FIXME: I have no idea what to put here */
+        .bInterval = 1,
+};
+
+static void nop_release(struct device *dev)
+{
+
+}
+
+static struct usba_udc the_udc = {
+        .gadget = {
+                .ops            = &usba_udc_ops,
+                .ep0            = &usba_ep[0].ep,
+                .ep_list        = LIST_HEAD_INIT(the_udc.gadget.ep_list),
+                .is_dualspeed   = 1,
+                .name           = "atmel_usba_udc",
+                .dev    = {
+                        .bus_id         = "gadget",
+                        .release        = nop_release,
+                },
+        },
+
+        .lock   = SPIN_LOCK_UNLOCKED,
+};
+
+/*
+ * Called with interrupts disabled and udc->lock held.
+ */
+static void reset_all_endpoints(struct usba_udc *udc)
+{
+        struct usba_ep *ep;
+        struct usba_request *req, *tmp_req;
+
+        usba_writel(udc, EPT_RST, ~0UL);
+
+        ep = to_usba_ep(udc->gadget.ep0);
+        list_for_each_entry_safe(req, tmp_req, &ep->queue, queue) {
+                list_del_init(&req->queue);
+                request_complete(ep, req, -ECONNRESET);
+        }
+
+        list_for_each_entry(ep, &udc->gadget.ep_list, ep.ep_list) {
+                if (ep->desc) {
+                        spin_unlock(&udc->lock);
+                        usba_ep_disable(&ep->ep);
+                        spin_lock(&udc->lock);
+                }
+        }
+}
+
+static struct usba_ep *get_ep_by_addr(struct usba_udc *udc, u16 wIndex)
+{
+        struct usba_ep *ep;
+
+        if ((wIndex & USB_ENDPOINT_NUMBER_MASK) == 0)
+                return to_usba_ep(udc->gadget.ep0);
+
+        list_for_each_entry (ep, &udc->gadget.ep_list, ep.ep_list) {
+                u8 bEndpointAddress;
+
+                if (!ep->desc)
+                        continue;
+                bEndpointAddress = ep->desc->bEndpointAddress;
+                if ((wIndex ^ bEndpointAddress) & USB_DIR_IN)
+                        continue;
+                if ((bEndpointAddress & USB_ENDPOINT_NUMBER_MASK)
+                                == (wIndex & USB_ENDPOINT_NUMBER_MASK))
+                        return ep;
+        }
+
+        return NULL;
+}
+
+/* Called with interrupts disabled and udc->lock held */
+static inline void set_protocol_stall(struct usba_udc *udc, struct usba_ep *ep)
+{
+        usba_ep_writel(ep, SET_STA, USBA_FORCE_STALL);
+        ep->state = WAIT_FOR_SETUP;
+}
+
+static inline int is_stalled(struct usba_udc *udc, struct usba_ep *ep)
+{
+        if (usba_ep_readl(ep, STA) & USBA_FORCE_STALL)
+                return 1;
+        return 0;
+}
+
+static inline void set_address(struct usba_udc *udc, unsigned int addr)
+{
+        u32 regval;
+
+        DBG(DBG_BUS, "setting address %u...\n", addr);
+        regval = usba_readl(udc, CTRL);
+        regval = USBA_BFINS(DEV_ADDR, addr, regval);
+        usba_writel(udc, CTRL, regval);
+}
+
+static int do_test_mode(struct usba_udc *udc)
+{
+        static const char test_packet_buffer[] = {
+                /* JKJKJKJK * 9 */
+                0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+                /* JJKKJJKK * 8 */
+                0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA,
+                /* JJKKJJKK * 8 */
+                0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE,
+                /* JJJJJJJKKKKKKK * 8 */
+                0xFE, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+                0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+                /* JJJJJJJK * 8 */
+                0x7F, 0xBF, 0xDF, 0xEF, 0xF7, 0xFB, 0xFD,
+                /* {JKKKKKKK * 10}, JK */
+                0xFC, 0x7E, 0xBF, 0xDF, 0xEF, 0xF7, 0xFB, 0xFD, 0x7E
+        };
+        struct usba_ep *ep;
+        struct device *dev = &udc->pdev->dev;
+        int test_mode;
+
+        test_mode = udc->test_mode;
+
+        /* Start from a clean slate */
+        reset_all_endpoints(udc);
+
+        switch (test_mode) {
+        case 0x0100:
+                /* Test_J */
+                usba_writel(udc, TST, USBA_TST_J_MODE);
+                dev_info(dev, "Entering Test_J mode...\n");
+                break;
+        case 0x0200:
+                /* Test_K */
+                usba_writel(udc, TST, USBA_TST_K_MODE);
+                dev_info(dev, "Entering Test_K mode...\n");
+                break;
+        case 0x0300:
+                /*
+                 * Test_SE0_NAK: Force high-speed mode and set up ep0
+                 * for Bulk IN transfers
+                 */
+                ep = &usba_ep[0];
+                usba_writel(udc, TST,
+                                USBA_BF(SPEED_CFG, USBA_SPEED_CFG_FORCE_HIGH));
+                usba_ep_writel(ep, CFG,
+                                USBA_BF(EPT_SIZE, USBA_EPT_SIZE_64)
+                                | USBA_EPT_DIR_IN
+                                | USBA_BF(EPT_TYPE, USBA_EPT_TYPE_BULK)
+                                | USBA_BF(BK_NUMBER, 1));
+                if (!(usba_ep_readl(ep, CFG) & USBA_EPT_MAPPED)) {
+                        set_protocol_stall(udc, ep);
+                        dev_err(dev, "Test_SE0_NAK: ep0 not mapped\n");
+                } else {
+                        usba_ep_writel(ep, CTL_ENB, USBA_EPT_ENABLE);
+                        dev_info(dev, "Entering Test_SE0_NAK mode...\n");
+                }
+                break;
+        case 0x0400:
+                /* Test_Packet */
+                ep = &usba_ep[0];
+                usba_ep_writel(ep, CFG,
+                                USBA_BF(EPT_SIZE, USBA_EPT_SIZE_64)
+                                | USBA_EPT_DIR_IN
+                                | USBA_BF(EPT_TYPE, USBA_EPT_TYPE_BULK)
+                                | USBA_BF(BK_NUMBER, 1));
+                if (!(usba_ep_readl(ep, CFG) & USBA_EPT_MAPPED)) {
+                        set_protocol_stall(udc, ep);
+                        dev_err(dev, "Test_Packet: ep0 not mapped\n");
+                } else {
+                        usba_ep_writel(ep, CTL_ENB, USBA_EPT_ENABLE);
+                        usba_writel(udc, TST, USBA_TST_PKT_MODE);
+                        copy_to_fifo(ep->fifo, test_packet_buffer,
+                                        sizeof(test_packet_buffer));
+                        usba_ep_writel(ep, SET_STA, USBA_TX_PK_RDY);
+                        dev_info(dev, "Entering Test_Packet mode...\n");
+                }
+                break;
+        default:
+                dev_err(dev, "Invalid test mode: 0x%04x\n", test_mode);
+                return -EINVAL;
+        }
+
+        return 0;
+}
+
+/* Avoid overly long expressions */
+static inline bool feature_is_dev_remote_wakeup(struct usb_ctrlrequest *crq)
+{
+        if (crq->wValue == __constant_cpu_to_le16(USB_DEVICE_REMOTE_WAKEUP))
+                return true;
+        return false;
+}
+
+static inline bool feature_is_dev_test_mode(struct usb_ctrlrequest *crq)
+{
+        if (crq->wValue == __constant_cpu_to_le16(USB_DEVICE_TEST_MODE))
+                return true;
+        return false;
+}
+
+static inline bool feature_is_ep_halt(struct usb_ctrlrequest *crq)
+{
+        if (crq->wValue == __constant_cpu_to_le16(USB_ENDPOINT_HALT))
+                return true;
+        return false;
+}
+
+static int handle_ep0_setup(struct usba_udc *udc, struct usba_ep *ep,
+                struct usb_ctrlrequest *crq)
+{
+        int retval = 0;;
+
+        switch (crq->bRequest) {
+        case USB_REQ_GET_STATUS: {
+                u16 status;
+
+                if (crq->bRequestType == (USB_DIR_IN | USB_RECIP_DEVICE)) {
+                        status = cpu_to_le16(udc->devstatus);
+                } else if (crq->bRequestType
+                                == (USB_DIR_IN | USB_RECIP_INTERFACE)) {
+                        status = __constant_cpu_to_le16(0);
+                } else if (crq->bRequestType
+                                == (USB_DIR_IN | USB_RECIP_ENDPOINT)) {
+                        struct usba_ep *target;
+
+                        target = get_ep_by_addr(udc, le16_to_cpu(crq->wIndex));
+                        if (!target)
+                                goto stall;
+
+                        status = 0;
+                        if (is_stalled(udc, target))
+                                status |= __constant_cpu_to_le16(1);
+                } else
+                        goto delegate;
+
+                /* Write directly to the FIFO. No queueing is done. */
+                if (crq->wLength != __constant_cpu_to_le16(sizeof(status)))
+                        goto stall;
+                ep->state = DATA_STAGE_IN;
+                __raw_writew(status, ep->fifo);
+                usba_ep_writel(ep, SET_STA, USBA_TX_PK_RDY);
+                break;
+        }
+
+        case USB_REQ_CLEAR_FEATURE: {
+                if (crq->bRequestType == USB_RECIP_DEVICE) {
+                        if (feature_is_dev_remote_wakeup(crq))
+                                udc->devstatus
+                                        &= ~(1 << USB_DEVICE_REMOTE_WAKEUP);
+                        else
+                                /* Can't CLEAR_FEATURE TEST_MODE */
+                                goto stall;
+                } else if (crq->bRequestType == USB_RECIP_ENDPOINT) {
+                        struct usba_ep *target;
+
+                        if (crq->wLength != __constant_cpu_to_le16(0)
+                                        || !feature_is_ep_halt(crq))
+                                goto stall;
+                        target = get_ep_by_addr(udc, le16_to_cpu(crq->wIndex));
+                        if (!target)
+                                goto stall;
+
+                        usba_ep_writel(target, CLR_STA, USBA_FORCE_STALL);
+                        if (target->index != 0)
+                                usba_ep_writel(target, CLR_STA,
+                                                USBA_TOGGLE_CLR);
+                } else {
+                        goto delegate;
+                }
+
+                send_status(udc, ep);
+                break;
+        }
+
+        case USB_REQ_SET_FEATURE: {
+                if (crq->bRequestType == USB_RECIP_DEVICE) {
+                        if (feature_is_dev_test_mode(crq)) {
+                                send_status(udc, ep);
+                                ep->state = STATUS_STAGE_TEST;
+                                udc->test_mode = le16_to_cpu(crq->wIndex);
+                                return 0;
+                        } else if (feature_is_dev_remote_wakeup(crq)) {
+                                udc->devstatus |= 1 << USB_DEVICE_REMOTE_WAKEUP;
+                        } else {
+                                goto stall;
+                        }
+                } else if (crq->bRequestType == USB_RECIP_ENDPOINT) {
+                        struct usba_ep *target;
+
+                        if (crq->wLength != __constant_cpu_to_le16(0)
+                                        || !feature_is_ep_halt(crq))
+                                goto stall;
+
+                        target = get_ep_by_addr(udc, le16_to_cpu(crq->wIndex));
+                        if (!target)
+                                goto stall;
+
+                        usba_ep_writel(target, SET_STA, USBA_FORCE_STALL);
+                } else
+                        goto delegate;
+
+                send_status(udc, ep);
+                break;
+        }
+
+        case USB_REQ_SET_ADDRESS:
+                if (crq->bRequestType != (USB_DIR_OUT | USB_RECIP_DEVICE))
+                        goto delegate;
+
+                set_address(udc, le16_to_cpu(crq->wValue));
+                send_status(udc, ep);
+                ep->state = STATUS_STAGE_ADDR;
+                break;
+
+        default:
+delegate:
+                spin_unlock(&udc->lock);
+                retval = udc->driver->setup(&udc->gadget, crq);
+                spin_lock(&udc->lock);
+        }
+
+        return retval;
+
+stall:
+        printk(KERN_ERR
+                "udc: %s: Invalid setup request: %02x.%02x v%04x i%04x l%d, "
+                "halting endpoint...\n",
+                ep->ep.name, crq->bRequestType, crq->bRequest,
+                le16_to_cpu(crq->wValue), le16_to_cpu(crq->wIndex),
+                le16_to_cpu(crq->wLength));
+        set_protocol_stall(udc, ep);
+        return -1;
+}
+
+static void usba_control_irq(struct usba_udc *udc, struct usba_ep *ep)
+{
+        struct usba_request *req;
+        u32 epstatus;
+        u32 epctrl;
+
+restart:
+        epstatus = usba_ep_readl(ep, STA);
+        epctrl = usba_ep_readl(ep, CTL);
+
+        DBG(DBG_INT, "%s [%d]: s/%08x c/%08x\n",
+                        ep->ep.name, ep->state, epstatus, epctrl);
+
+        req = NULL;
+        if (!list_empty(&ep->queue))
+                req = list_entry(ep->queue.next,
+                                 struct usba_request, queue);
+
+        if ((epctrl & USBA_TX_PK_RDY) && !(epstatus & USBA_TX_PK_RDY)) {
+                if (req->submitted)
+                        next_fifo_transaction(ep, req);
+                else
+                        submit_request(ep, req);
+
+                if (req->last_transaction) {
+                        usba_ep_writel(ep, CTL_DIS, USBA_TX_PK_RDY);
+                        usba_ep_writel(ep, CTL_ENB, USBA_TX_COMPLETE);
+                }
+                goto restart;
+        }
+        if ((epstatus & epctrl) & USBA_TX_COMPLETE) {
+                usba_ep_writel(ep, CLR_STA, USBA_TX_COMPLETE);
+
+                switch (ep->state) {
+                case DATA_STAGE_IN:
+                        usba_ep_writel(ep, CTL_ENB, USBA_RX_BK_RDY);
+                        usba_ep_writel(ep, CTL_DIS, USBA_TX_COMPLETE);
+                        ep->state = STATUS_STAGE_OUT;
+                        break;
+                case STATUS_STAGE_ADDR:
+                        /* Activate our new address */
+                        usba_writel(udc, CTRL, (usba_readl(udc, CTRL)
+                                                | USBA_FADDR_EN));
+                        usba_ep_writel(ep, CTL_DIS, USBA_TX_COMPLETE);
+                        ep->state = WAIT_FOR_SETUP;
+                        break;
+                case STATUS_STAGE_IN:
+                        if (req) {
+                                list_del_init(&req->queue);
+                                request_complete(ep, req, 0);
+                                submit_next_request(ep);
+                        }
+                        usba_ep_writel(ep, CTL_DIS, USBA_TX_COMPLETE);
+                        ep->state = WAIT_FOR_SETUP;
+                        break;
+                case STATUS_STAGE_TEST:
+                        usba_ep_writel(ep, CTL_DIS, USBA_TX_COMPLETE);
+                        ep->state = WAIT_FOR_SETUP;
+                        if (do_test_mode(udc))
+                                set_protocol_stall(udc, ep);
+                        break;
+                default:
+                        printk(KERN_ERR
+                                "udc: %s: TXCOMP: Invalid endpoint state %d, "
+                                "halting endpoint...\n",
+                                ep->ep.name, ep->state);
+                        set_protocol_stall(udc, ep);
+                        break;
+                }
+
+                goto restart;
+        }
+        if ((epstatus & epctrl) & USBA_RX_BK_RDY) {
+                switch (ep->state) {
+                case STATUS_STAGE_OUT:
+                        usba_ep_writel(ep, CLR_STA, USBA_RX_BK_RDY);
+                        usba_ep_writel(ep, CTL_DIS, USBA_RX_BK_RDY);
+
+                        if (req) {
+                                list_del_init(&req->queue);
+                                request_complete(ep, req, 0);
+                        }
+                        ep->state = WAIT_FOR_SETUP;
+                        break;
+
+                case DATA_STAGE_OUT:
+                        receive_data(ep);
+                        break;
+
+                default:
+                        usba_ep_writel(ep, CLR_STA, USBA_RX_BK_RDY);
+                        usba_ep_writel(ep, CTL_DIS, USBA_RX_BK_RDY);
+                        printk(KERN_ERR
+                                "udc: %s: RXRDY: Invalid endpoint state %d, "
+                                "halting endpoint...\n",
+                                ep->ep.name, ep->state);
+                        set_protocol_stall(udc, ep);
+                        break;
+                }
+
+                goto restart;
+        }
+        if (epstatus & USBA_RX_SETUP) {
+                union {
+                        struct usb_ctrlrequest crq;
+                        unsigned long data[2];
+                } crq;
+                unsigned int pkt_len;
+                int ret;
+
+                if (ep->state != WAIT_FOR_SETUP) {
+                        /*
+                         * Didn't expect a SETUP packet at this
+                         * point. Clean up any pending requests (which
+                         * may be successful).
+                         */
+                        int status = -EPROTO;
+
+                        /*
+                         * RXRDY and TXCOMP are dropped when SETUP
+                         * packets arrive.  Just pretend we received
+                         * the status packet.
+                         */
+                        if (ep->state == STATUS_STAGE_OUT
+                                        || ep->state == STATUS_STAGE_IN) {
+                                usba_ep_writel(ep, CTL_DIS, USBA_RX_BK_RDY);
+                                status = 0;
+                        }
+
+                        if (req) {
+                                list_del_init(&req->queue);
+                                request_complete(ep, req, status);
+                        }
+                }
+
+                pkt_len = USBA_BFEXT(BYTE_COUNT, usba_ep_readl(ep, STA));
+                DBG(DBG_HW, "Packet length: %u\n", pkt_len);
+                if (pkt_len != sizeof(crq)) {
+                        printk(KERN_WARNING "udc: Invalid packet length %u "
+                                "(expected %lu)\n", pkt_len, sizeof(crq));
+                        set_protocol_stall(udc, ep);
+                        return;
+                }
+
+                DBG(DBG_FIFO, "Copying ctrl request from 0x%p:\n", ep->fifo);
+                copy_from_fifo(crq.data, ep->fifo, sizeof(crq));
+
+                /* Free up one bank in the FIFO so that we can
+                 * generate or receive a reply right away. */
+                usba_ep_writel(ep, CLR_STA, USBA_RX_SETUP);
+
+                /* printk(KERN_DEBUG "setup: %d: %02x.%02x\n",
+                        ep->state, crq.crq.bRequestType,
+                        crq.crq.bRequest); */
+
+                if (crq.crq.bRequestType & USB_DIR_IN) {
+                        /*
+                         * The USB 2.0 spec states that "if wLength is
+                         * zero, there is no data transfer phase."
+                         * However, testusb #14 seems to actually
+                         * expect a data phase even if wLength = 0...
+                         */
+                        ep->state = DATA_STAGE_IN;
+                } else {
+                        if (crq.crq.wLength != __constant_cpu_to_le16(0))
+                                ep->state = DATA_STAGE_OUT;
+                        else
+                                ep->state = STATUS_STAGE_IN;
+                }
+
+                ret = -1;
+                if (ep->index == 0)
+                        ret = handle_ep0_setup(udc, ep, &crq.crq);
+                else {
+                        spin_unlock(&udc->lock);
+                        ret = udc->driver->setup(&udc->gadget, &crq.crq);
+                        spin_lock(&udc->lock);
+                }
+
+                DBG(DBG_BUS, "req %02x.%02x, length %d, state %d, ret %d\n",
+                        crq.crq.bRequestType, crq.crq.bRequest,
+                        le16_to_cpu(crq.crq.wLength), ep->state, ret);
+
+                if (ret < 0) {
+                        /* Let the host know that we failed */
+                        set_protocol_stall(udc, ep);
+                }
+        }
+}
+
+static void usba_ep_irq(struct usba_udc *udc, struct usba_ep *ep)
+{
+        struct usba_request *req;
+        u32 epstatus;
+        u32 epctrl;
+
+        epstatus = usba_ep_readl(ep, STA);
+        epctrl = usba_ep_readl(ep, CTL);
+
+        DBG(DBG_INT, "%s: interrupt, status: 0x%08x\n", ep->ep.name, epstatus);
+
+        while ((epctrl & USBA_TX_PK_RDY) && !(epstatus & USBA_TX_PK_RDY)) {
+                DBG(DBG_BUS, "%s: TX PK ready\n", ep->ep.name);
+
+                if (list_empty(&ep->queue)) {
+                        dev_warn(&udc->pdev->dev, "ep_irq: queue empty\n");
+                        usba_ep_writel(ep, CTL_DIS, USBA_TX_PK_RDY);
+                        return;
+                }
+
+                req = list_entry(ep->queue.next, struct usba_request, queue);
+
+                if (req->using_dma) {
+                        /* Send a zero-length packet */
+                        usba_ep_writel(ep, SET_STA,
+                                        USBA_TX_PK_RDY);
+                        usba_ep_writel(ep, CTL_DIS,
+                                        USBA_TX_PK_RDY);
+                        list_del_init(&req->queue);
+                        submit_next_request(ep);
+                        request_complete(ep, req, 0);
+                } else {
+                        if (req->submitted)
+                                next_fifo_transaction(ep, req);
+                        else
+                                submit_request(ep, req);
+
+                        if (req->last_transaction) {
+                                list_del_init(&req->queue);
+                                submit_next_request(ep);
+                                request_complete(ep, req, 0);
+                        }
+                }
+
+                epstatus = usba_ep_readl(ep, STA);
+                epctrl = usba_ep_readl(ep, CTL);
+        }
+        if ((epstatus & epctrl) & USBA_RX_BK_RDY) {
+                DBG(DBG_BUS, "%s: RX data ready\n", ep->ep.name);
+                receive_data(ep);
+                usba_ep_writel(ep, CLR_STA, USBA_RX_BK_RDY);
+        }
+}
+
+static void usba_dma_irq(struct usba_udc *udc, struct usba_ep *ep)
+{
+        struct usba_request *req;
+        u32 status, control, pending;
+
+        status = usba_dma_readl(ep, STATUS);
+        control = usba_dma_readl(ep, CONTROL);
+#ifdef CONFIG_USB_GADGET_DEBUG_FS
+        ep->last_dma_status = status;
+#endif
+        pending = status & control;
+        DBG(DBG_INT | DBG_DMA, "dma irq, s/%#08x, c/%#08x\n", status, control);
+
+        if (status & USBA_DMA_CH_EN) {
+                dev_err(&udc->pdev->dev,
+                        "DMA_CH_EN is set after transfer is finished!\n");
+                dev_err(&udc->pdev->dev,
+                        "status=%#08x, pending=%#08x, control=%#08x\n",
+                        status, pending, control);
+
+                /*
+                 * try to pretend nothing happened. We might have to
+                 * do something here...
+                 */
+        }
+
+        if (list_empty(&ep->queue))
+                /* Might happen if a reset comes along at the right moment */
+                return;
+
+        if (pending & (USBA_DMA_END_TR_ST | USBA_DMA_END_BUF_ST)) {
+                req = list_entry(ep->queue.next, struct usba_request, queue);
+                usba_update_req(ep, req, status);
+
+                list_del_init(&req->queue);
+                submit_next_request(ep);
+                request_complete(ep, req, 0);
+        }
+}
+
+static irqreturn_t usba_udc_irq(int irq, void *devid)
+{
+        struct usba_udc *udc = devid;
+        u32 status;
+        u32 dma_status;
+        u32 ep_status;
+
+        spin_lock(&udc->lock);
+
+        status = usba_readl(udc, INT_STA);
+        DBG(DBG_INT, "irq, status=%#08x\n", status);
+
+        if (status & USBA_DET_SUSPEND) {
+                usba_writel(udc, INT_CLR, USBA_DET_SUSPEND);
+                DBG(DBG_BUS, "Suspend detected\n");
+                if (udc->gadget.speed != USB_SPEED_UNKNOWN
+                                && udc->driver && udc->driver->suspend) {
+                        spin_unlock(&udc->lock);
+                        udc->driver->suspend(&udc->gadget);
+                        spin_lock(&udc->lock);
+                }
+        }
+
+        if (status & USBA_WAKE_UP) {
+                usba_writel(udc, INT_CLR, USBA_WAKE_UP);
+                DBG(DBG_BUS, "Wake Up CPU detected\n");
+        }
+
+        if (status & USBA_END_OF_RESUME) {
+                usba_writel(udc, INT_CLR, USBA_END_OF_RESUME);
+                DBG(DBG_BUS, "Resume detected\n");
+                if (udc->gadget.speed != USB_SPEED_UNKNOWN
+                                && udc->driver && udc->driver->resume) {
+                        spin_unlock(&udc->lock);
+                        udc->driver->resume(&udc->gadget);
+                        spin_lock(&udc->lock);
+                }
+        }
+
+        dma_status = USBA_BFEXT(DMA_INT, status);
+        if (dma_status) {
+                int i;
+
+                for (i = 1; i < USBA_NR_ENDPOINTS; i++)
+                        if (dma_status & (1 << i))
+                                usba_dma_irq(udc, &usba_ep[i]);
+        }
+
+        ep_status = USBA_BFEXT(EPT_INT, status);
+        if (ep_status) {
+                int i;
+
+                for (i = 0; i < USBA_NR_ENDPOINTS; i++)
+                        if (ep_status & (1 << i)) {
+                                if (ep_is_control(&usba_ep[i]))
+                                        usba_control_irq(udc, &usba_ep[i]);
+                                else
+                                        usba_ep_irq(udc, &usba_ep[i]);
+                        }
+        }
+
+        if (status & USBA_END_OF_RESET) {
+                struct usba_ep *ep0;
+
+                usba_writel(udc, INT_CLR, USBA_END_OF_RESET);
+                reset_all_endpoints(udc);
+
+                if (status & USBA_HIGH_SPEED) {
+                        DBG(DBG_BUS, "High-speed bus reset detected\n");
+                        udc->gadget.speed = USB_SPEED_HIGH;
+                } else {
+                        DBG(DBG_BUS, "Full-speed bus reset detected\n");
+                        udc->gadget.speed = USB_SPEED_FULL;
+                }
+
+                ep0 = &usba_ep[0];
+                ep0->desc = &usba_ep0_desc;
+                ep0->state = WAIT_FOR_SETUP;
+                usba_ep_writel(ep0, CFG,
+                                (USBA_BF(EPT_SIZE, EP0_EPT_SIZE)
+                                | USBA_BF(EPT_TYPE, USBA_EPT_TYPE_CONTROL)
+                                | USBA_BF(BK_NUMBER, USBA_BK_NUMBER_ONE)));
+                usba_ep_writel(ep0, CTL_ENB,
+                                USBA_EPT_ENABLE | USBA_RX_SETUP);
+                usba_writel(udc, INT_ENB,
+                                (usba_readl(udc, INT_ENB)
+                                | USBA_BF(EPT_INT, 1)
+                                | USBA_DET_SUSPEND
+                                | USBA_END_OF_RESUME));
+
+                if (!(usba_ep_readl(ep0, CFG) & USBA_EPT_MAPPED))
+                        dev_warn(&udc->pdev->dev,
+                                 "WARNING: EP0 configuration is invalid!\n");
+        }
+
+        spin_unlock(&udc->lock);
+
+        return IRQ_HANDLED;
+}
+
+static irqreturn_t usba_vbus_irq(int irq, void *devid)
+{
+        struct usba_udc *udc = devid;
+        int vbus;
+
+        /* debounce */
+        udelay(10);
+
+        spin_lock(&udc->lock);
+
+        /* May happen if Vbus pin toggles during probe() */
+        if (!udc->driver)
+                goto out;
+
+        vbus = gpio_get_value(udc->vbus_pin);
+        if (vbus != udc->vbus_prev) {
+                if (vbus) {
+                        usba_writel(udc, CTRL, USBA_EN_USBA);
+                        usba_writel(udc, INT_ENB, USBA_END_OF_RESET);
+                } else {
+                        udc->gadget.speed = USB_SPEED_UNKNOWN;
+                        reset_all_endpoints(udc);
+                        usba_writel(udc, CTRL, 0);
+                        spin_unlock(&udc->lock);
+                        udc->driver->disconnect(&udc->gadget);
+                        spin_lock(&udc->lock);
+                }
+                udc->vbus_prev = vbus;
+        }
+
+out:
+        spin_unlock(&udc->lock);
+
+        return IRQ_HANDLED;
+}
+
+int usb_gadget_register_driver(struct usb_gadget_driver *driver)
+{
+        struct usba_udc *udc = &the_udc;
+        unsigned long flags;
+        int ret;
+
+        if (!udc->pdev)
+                return -ENODEV;
+
+        spin_lock_irqsave(&udc->lock, flags);
+        if (udc->driver) {
+                spin_unlock_irqrestore(&udc->lock, flags);
+                return -EBUSY;
+        }
+
+        udc->devstatus = 1 << USB_DEVICE_SELF_POWERED;
+        udc->driver = driver;
+        udc->gadget.dev.driver = &driver->driver;
+        spin_unlock_irqrestore(&udc->lock, flags);
+
+        clk_enable(udc->pclk);
+        clk_enable(udc->hclk);
+
+        ret = driver->bind(&udc->gadget);
+        if (ret) {
+                DBG(DBG_ERR, "Could not bind to driver %s: error %d\n",
+                        driver->driver.name, ret);
+                goto err_driver_bind;
+        }
+
+        DBG(DBG_GADGET, "registered driver `%s'\n", driver->driver.name);
+
+        udc->vbus_prev = 0;
+        if (udc->vbus_pin != -1)
+                enable_irq(gpio_to_irq(udc->vbus_pin));
+
+        /* If Vbus is present, enable the controller and wait for reset */
+        spin_lock_irqsave(&udc->lock, flags);
+        if (vbus_is_present(udc) && udc->vbus_prev == 0) {
+                usba_writel(udc, CTRL, USBA_EN_USBA);
+                usba_writel(udc, INT_ENB, USBA_END_OF_RESET);
+        }
+        spin_unlock_irqrestore(&udc->lock, flags);
+
+        return 0;
+
+err_driver_bind:
+        udc->driver = NULL;
+        udc->gadget.dev.driver = NULL;
+        return ret;
+}
+EXPORT_SYMBOL(usb_gadget_register_driver);
+
+int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
+{
+        struct usba_udc *udc = &the_udc;
+        unsigned long flags;
+
+        if (!udc->pdev)
+                return -ENODEV;
+        if (driver != udc->driver)
+                return -EINVAL;
+
+        if (udc->vbus_pin != -1)
+                disable_irq(gpio_to_irq(udc->vbus_pin));
+
+        spin_lock_irqsave(&udc->lock, flags);
+        udc->gadget.speed = USB_SPEED_UNKNOWN;
+        reset_all_endpoints(udc);
+        spin_unlock_irqrestore(&udc->lock, flags);
+
+        /* This will also disable the DP pullup */
+        usba_writel(udc, CTRL, 0);
+
+        driver->unbind(&udc->gadget);
+        udc->gadget.dev.driver = NULL;
+        udc->driver = NULL;
+
+        clk_disable(udc->hclk);
+        clk_disable(udc->pclk);
+
+        DBG(DBG_GADGET, "unregistered driver `%s'\n", driver->driver.name);
+
+        return 0;
+}
+EXPORT_SYMBOL(usb_gadget_unregister_driver);
+
+static int __init usba_udc_probe(struct platform_device *pdev)
+{
+        struct usba_platform_data *pdata = pdev->dev.platform_data;
+        struct resource *regs, *fifo;
+        struct clk *pclk, *hclk;
+        struct usba_udc *udc = &the_udc;
+        int irq, ret, i;
+
+        regs = platform_get_resource(pdev, IORESOURCE_MEM, CTRL_IOMEM_ID);
+        fifo = platform_get_resource(pdev, IORESOURCE_MEM, FIFO_IOMEM_ID);
+        if (!regs || !fifo)
+                return -ENXIO;
+
+        irq = platform_get_irq(pdev, 0);
+        if (irq < 0)
+                return irq;
+
+        pclk = clk_get(&pdev->dev, "pclk");
+        if (IS_ERR(pclk))
+                return PTR_ERR(pclk);
+        hclk = clk_get(&pdev->dev, "hclk");
+        if (IS_ERR(hclk)) {
+                ret = PTR_ERR(hclk);
+                goto err_get_hclk;
+        }
+
+        udc->pdev = pdev;
+        udc->pclk = pclk;
+        udc->hclk = hclk;
+        udc->vbus_pin = -1;
+
+        ret = -ENOMEM;
+        udc->regs = ioremap(regs->start, regs->end - regs->start + 1);
+        if (!udc->regs) {
+                dev_err(&pdev->dev, "Unable to map I/O memory, aborting.\n");
+                goto err_map_regs;
+        }
+        dev_info(&pdev->dev, "MMIO registers at 0x%08lx mapped at %p\n",
+                 (unsigned long)regs->start, udc->regs);
+        udc->fifo = ioremap(fifo->start, fifo->end - fifo->start + 1);
+        if (!udc->fifo) {
+                dev_err(&pdev->dev, "Unable to map FIFO, aborting.\n");
+                goto err_map_fifo;
+        }
+        dev_info(&pdev->dev, "FIFO at 0x%08lx mapped at %p\n",
+                 (unsigned long)fifo->start, udc->fifo);
+
+        device_initialize(&udc->gadget.dev);
+        udc->gadget.dev.parent = &pdev->dev;
+        udc->gadget.dev.dma_mask = pdev->dev.dma_mask;
+
+        platform_set_drvdata(pdev, udc);
+
+        /* Make sure we start from a clean slate */
+        clk_enable(pclk);
+        usba_writel(udc, CTRL, 0);
+        clk_disable(pclk);
+
+        INIT_LIST_HEAD(&usba_ep[0].ep.ep_list);
+        usba_ep[0].ep_regs = udc->regs + USBA_EPT_BASE(0);
+        usba_ep[0].dma_regs = udc->regs + USBA_DMA_BASE(0);
+        usba_ep[0].fifo = udc->fifo + USBA_FIFO_BASE(0);
+        for (i = 1; i < ARRAY_SIZE(usba_ep); i++) {
+                struct usba_ep *ep = &usba_ep[i];
+
+                ep->ep_regs = udc->regs + USBA_EPT_BASE(i);
+                ep->dma_regs = udc->regs + USBA_DMA_BASE(i);
+                ep->fifo = udc->fifo + USBA_FIFO_BASE(i);
+
+                list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list);
+        }
+
+        ret = request_irq(irq, usba_udc_irq, 0, "atmel_usba_udc", udc);
+        if (ret) {
+                dev_err(&pdev->dev, "Cannot request irq %d (error %d)\n",
+                        irq, ret);
+                goto err_request_irq;
+        }
+        udc->irq = irq;
+
+        ret = device_add(&udc->gadget.dev);
+        if (ret) {
+                dev_dbg(&pdev->dev, "Could not add gadget: %d\n", ret);
+                goto err_device_add;
+        }
+
+        if (pdata && pdata->vbus_pin != GPIO_PIN_NONE) {
+                if (!gpio_request(pdata->vbus_pin, "atmel_usba_udc")) {
+                        udc->vbus_pin = pdata->vbus_pin;
+
+                        ret = request_irq(gpio_to_irq(udc->vbus_pin),
+                                        usba_vbus_irq, 0,
+                                        "atmel_usba_udc", udc);
+                        if (ret) {
+                                gpio_free(udc->vbus_pin);
+                                udc->vbus_pin = -1;
+                                dev_warn(&udc->pdev->dev,
+                                         "failed to request vbus irq; "
+                                         "assuming always on\n");
+                        } else {
+                                disable_irq(gpio_to_irq(udc->vbus_pin));
+                        }
+                }
+        }
+
+        usba_init_debugfs(udc);
+        for (i = 1; i < ARRAY_SIZE(usba_ep); i++)
+                usba_ep_init_debugfs(udc, &usba_ep[i]);
+
+        return 0;
+
+err_device_add:
+        free_irq(irq, udc);
+err_request_irq:
+        iounmap(udc->fifo);
+err_map_fifo:
+        iounmap(udc->regs);
+err_map_regs:
+        clk_put(hclk);
+err_get_hclk:
+        clk_put(pclk);
+
+        platform_set_drvdata(pdev, NULL);
+
+        return ret;
+}
+
+static int __exit usba_udc_remove(struct platform_device *pdev)
+{
+        struct usba_udc *udc;
+        int i;
+
+        udc = platform_get_drvdata(pdev);
+
+        for (i = 1; i < ARRAY_SIZE(usba_ep); i++)
+                usba_ep_cleanup_debugfs(&usba_ep[i]);
+        usba_cleanup_debugfs(udc);
+
+        if (udc->vbus_pin != -1)
+                gpio_free(udc->vbus_pin);
+
+        free_irq(udc->irq, udc);
+        iounmap(udc->fifo);
+        iounmap(udc->regs);
+        clk_put(udc->hclk);
+        clk_put(udc->pclk);
+
+        device_unregister(&udc->gadget.dev);
+
+        return 0;
+}
+
+static struct platform_driver udc_driver = {
+        .remove         = __exit_p(usba_udc_remove),
+        .driver         = {
+                .name           = "atmel_usba_udc",
+        },
+};
+
+static int __init udc_init(void)
+{
+        return platform_driver_probe(&udc_driver, usba_udc_probe);
+}
+module_init(udc_init);
+
+static void __exit udc_exit(void)
+{
+        platform_driver_unregister(&udc_driver);
+}
+module_exit(udc_exit);
+
+MODULE_DESCRIPTION("Atmel USBA UDC driver");
+MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/gadget/atmel_usba_udc.h b/drivers/usb/gadget/atmel_usba_udc.h
new file mode 100644
index 000000000000..a68304e31a68
--- /dev/null
+++ b/drivers/usb/gadget/atmel_usba_udc.h
@@ -0,0 +1,352 @@
+/*
+ * Driver for the Atmel USBA high speed USB device controller
+ *
+ * Copyright (C) 2005-2007 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __LINUX_USB_GADGET_USBA_UDC_H__
+#define __LINUX_USB_GADGET_USBA_UDC_H__
+
+/* USB register offsets */
+#define USBA_CTRL                               0x0000
+#define USBA_FNUM                               0x0004
+#define USBA_INT_ENB                            0x0010
+#define USBA_INT_STA                            0x0014
+#define USBA_INT_CLR                            0x0018
+#define USBA_EPT_RST                            0x001c
+#define USBA_TST                                0x00e0
+
+/* USB endpoint register offsets */
+#define USBA_EPT_CFG                            0x0000
+#define USBA_EPT_CTL_ENB                        0x0004
+#define USBA_EPT_CTL_DIS                        0x0008
+#define USBA_EPT_CTL                            0x000c
+#define USBA_EPT_SET_STA                        0x0014
+#define USBA_EPT_CLR_STA                        0x0018
+#define USBA_EPT_STA                            0x001c
+
+/* USB DMA register offsets */
+#define USBA_DMA_NXT_DSC                        0x0000
+#define USBA_DMA_ADDRESS                        0x0004
+#define USBA_DMA_CONTROL                        0x0008
+#define USBA_DMA_STATUS                         0x000c
+
+/* Bitfields in CTRL */
+#define USBA_DEV_ADDR_OFFSET                    0
+#define USBA_DEV_ADDR_SIZE                      7
+#define USBA_FADDR_EN                           (1 <<  7)
+#define USBA_EN_USBA                            (1 <<  8)
+#define USBA_DETACH                             (1 <<  9)
+#define USBA_REMOTE_WAKE_UP                     (1 << 10)
+
+/* Bitfields in FNUM */
+#define USBA_MICRO_FRAME_NUM_OFFSET             0
+#define USBA_MICRO_FRAME_NUM_SIZE               3
+#define USBA_FRAME_NUMBER_OFFSET                3
+#define USBA_FRAME_NUMBER_SIZE                  11
+#define USBA_FRAME_NUM_ERROR                    (1 << 31)
+
+/* Bitfields in INT_ENB/INT_STA/INT_CLR */
+#define USBA_HIGH_SPEED                         (1 <<  0)
+#define USBA_DET_SUSPEND                        (1 <<  1)
+#define USBA_MICRO_SOF                          (1 <<  2)
+#define USBA_SOF                                (1 <<  3)
+#define USBA_END_OF_RESET                       (1 <<  4)
+#define USBA_WAKE_UP                            (1 <<  5)
+#define USBA_END_OF_RESUME                      (1 <<  6)
+#define USBA_UPSTREAM_RESUME                    (1 <<  7)
+#define USBA_EPT_INT_OFFSET                     8
+#define USBA_EPT_INT_SIZE                       16
+#define USBA_DMA_INT_OFFSET                     24
+#define USBA_DMA_INT_SIZE                       8
+
+/* Bitfields in EPT_RST */
+#define USBA_RST_OFFSET                         0
+#define USBA_RST_SIZE                           16
+
+/* Bitfields in USBA_TST */
+#define USBA_SPEED_CFG_OFFSET                   0
+#define USBA_SPEED_CFG_SIZE                     2
+#define USBA_TST_J_MODE                         (1 <<  2)
+#define USBA_TST_K_MODE                         (1 <<  3)
+#define USBA_TST_PKT_MODE                       (1 <<  4)
+#define USBA_OPMODE2                            (1 <<  5)
+
+/* Bitfields in EPT_CFG */
+#define USBA_EPT_SIZE_OFFSET                    0
+#define USBA_EPT_SIZE_SIZE                      3
+#define USBA_EPT_DIR_IN                         (1 <<  3)
+#define USBA_EPT_TYPE_OFFSET                    4
+#define USBA_EPT_TYPE_SIZE                      2
+#define USBA_BK_NUMBER_OFFSET                   6
+#define USBA_BK_NUMBER_SIZE                     2
+#define USBA_NB_TRANS_OFFSET                    8
+#define USBA_NB_TRANS_SIZE                      2
+#define USBA_EPT_MAPPED                         (1 << 31)
+
+/* Bitfields in EPT_CTL/EPT_CTL_ENB/EPT_CTL_DIS */
+#define USBA_EPT_ENABLE                         (1 <<  0)
+#define USBA_AUTO_VALID                         (1 <<  1)
+#define USBA_INTDIS_DMA                         (1 <<  3)
+#define USBA_NYET_DIS                           (1 <<  4)
+#define USBA_DATAX_RX                           (1 <<  6)
+#define USBA_MDATA_RX                           (1 <<  7)
+/* Bits 8-15 and 31 enable interrupts for respective bits in EPT_STA */
+#define USBA_BUSY_BANK_IE                       (1 << 18)
+
+/* Bitfields in EPT_SET_STA/EPT_CLR_STA/EPT_STA */
+#define USBA_FORCE_STALL                        (1 <<  5)
+#define USBA_TOGGLE_CLR                         (1 <<  6)
+#define USBA_TOGGLE_SEQ_OFFSET                  6
+#define USBA_TOGGLE_SEQ_SIZE                    2
+#define USBA_ERR_OVFLW                          (1 <<  8)
+#define USBA_RX_BK_RDY                          (1 <<  9)
+#define USBA_KILL_BANK                          (1 <<  9)
+#define USBA_TX_COMPLETE                        (1 << 10)
+#define USBA_TX_PK_RDY                          (1 << 11)
+#define USBA_ISO_ERR_TRANS                      (1 << 11)
+#define USBA_RX_SETUP                           (1 << 12)
+#define USBA_ISO_ERR_FLOW                       (1 << 12)
+#define USBA_STALL_SENT                         (1 << 13)
+#define USBA_ISO_ERR_CRC                        (1 << 13)
+#define USBA_ISO_ERR_NBTRANS                    (1 << 13)
+#define USBA_NAK_IN                             (1 << 14)
+#define USBA_ISO_ERR_FLUSH                      (1 << 14)
+#define USBA_NAK_OUT                            (1 << 15)
+#define USBA_CURRENT_BANK_OFFSET                16
+#define USBA_CURRENT_BANK_SIZE                  2
+#define USBA_BUSY_BANKS_OFFSET                  18
+#define USBA_BUSY_BANKS_SIZE                    2
+#define USBA_BYTE_COUNT_OFFSET                  20
+#define USBA_BYTE_COUNT_SIZE                    11
+#define USBA_SHORT_PACKET                       (1 << 31)
+
+/* Bitfields in DMA_CONTROL */
+#define USBA_DMA_CH_EN                          (1 <<  0)
+#define USBA_DMA_LINK                           (1 <<  1)
+#define USBA_DMA_END_TR_EN                      (1 <<  2)
+#define USBA_DMA_END_BUF_EN                     (1 <<  3)
+#define USBA_DMA_END_TR_IE                      (1 <<  4)
+#define USBA_DMA_END_BUF_IE                     (1 <<  5)
+#define USBA_DMA_DESC_LOAD_IE                   (1 <<  6)
+#define USBA_DMA_BURST_LOCK                     (1 <<  7)
+#define USBA_DMA_BUF_LEN_OFFSET                 16
+#define USBA_DMA_BUF_LEN_SIZE                   16
+
+/* Bitfields in DMA_STATUS */
+#define USBA_DMA_CH_ACTIVE                      (1 <<  1)
+#define USBA_DMA_END_TR_ST                      (1 <<  4)
+#define USBA_DMA_END_BUF_ST                     (1 <<  5)
+#define USBA_DMA_DESC_LOAD_ST                   (1 <<  6)
+
+/* Constants for SPEED_CFG */
+#define USBA_SPEED_CFG_NORMAL                   0
+#define USBA_SPEED_CFG_FORCE_HIGH               2
+#define USBA_SPEED_CFG_FORCE_FULL               3
+
+/* Constants for EPT_SIZE */
+#define USBA_EPT_SIZE_8                         0
+#define USBA_EPT_SIZE_16                        1
+#define USBA_EPT_SIZE_32                        2
+#define USBA_EPT_SIZE_64                        3
+#define USBA_EPT_SIZE_128                       4
+#define USBA_EPT_SIZE_256                       5
+#define USBA_EPT_SIZE_512                       6
+#define USBA_EPT_SIZE_1024                      7
+
+/* Constants for EPT_TYPE */
+#define USBA_EPT_TYPE_CONTROL                   0
+#define USBA_EPT_TYPE_ISO                       1
+#define USBA_EPT_TYPE_BULK                      2
+#define USBA_EPT_TYPE_INT                       3
+
+/* Constants for BK_NUMBER */
+#define USBA_BK_NUMBER_ZERO                     0
+#define USBA_BK_NUMBER_ONE                      1
+#define USBA_BK_NUMBER_DOUBLE                   2
+#define USBA_BK_NUMBER_TRIPLE                   3
+
+/* Bit manipulation macros */
+#define USBA_BF(name, value)                                    \
+        (((value) & ((1 << USBA_##name##_SIZE) - 1))            \
+         << USBA_##name##_OFFSET)
+#define USBA_BFEXT(name, value)                                 \
+        (((value) >> USBA_##name##_OFFSET)                      \
+         & ((1 << USBA_##name##_SIZE) - 1))
+#define USBA_BFINS(name, value, old)                            \
+        (((old) & ~(((1 << USBA_##name##_SIZE) - 1)             \
+                    << USBA_##name##_OFFSET))                   \
+         | USBA_BF(name, value))
+
+/* Register access macros */
+#define usba_readl(udc, reg)                                    \
+        __raw_readl((udc)->regs + USBA_##reg)
+#define usba_writel(udc, reg, value)                            \
+        __raw_writel((value), (udc)->regs + USBA_##reg)
+#define usba_ep_readl(ep, reg)                                  \
+        __raw_readl((ep)->ep_regs + USBA_EPT_##reg)
+#define usba_ep_writel(ep, reg, value)                          \
+        __raw_writel((value), (ep)->ep_regs + USBA_EPT_##reg)
+#define usba_dma_readl(ep, reg)                                 \
+        __raw_readl((ep)->dma_regs + USBA_DMA_##reg)
+#define usba_dma_writel(ep, reg, value)                         \
+        __raw_writel((value), (ep)->dma_regs + USBA_DMA_##reg)
+
+/* Calculate base address for a given endpoint or DMA controller */
+#define USBA_EPT_BASE(x)        (0x100 + (x) * 0x20)
+#define USBA_DMA_BASE(x)        (0x300 + (x) * 0x10)
+#define USBA_FIFO_BASE(x)       ((x) << 16)
+
+/* Synth parameters */
+#define USBA_NR_ENDPOINTS       7
+
+#define EP0_FIFO_SIZE           64
+#define EP0_EPT_SIZE            USBA_EPT_SIZE_64
+#define EP0_NR_BANKS            1
+
+/*
+ * REVISIT: Try to eliminate this value. Can we rely on req->mapped to
+ * provide this information?
+ */
+#define DMA_ADDR_INVALID (~(dma_addr_t)0)
+
+#define FIFO_IOMEM_ID   0
+#define CTRL_IOMEM_ID   1
+
+#ifdef DEBUG
+#define DBG_ERR         0x0001  /* report all error returns */
+#define DBG_HW          0x0002  /* debug hardware initialization */
+#define DBG_GADGET      0x0004  /* calls to/from gadget driver */
+#define DBG_INT         0x0008  /* interrupts */
+#define DBG_BUS         0x0010  /* report changes in bus state */
+#define DBG_QUEUE       0x0020  /* debug request queue processing */
+#define DBG_FIFO        0x0040  /* debug FIFO contents */
+#define DBG_DMA         0x0080  /* debug DMA handling */
+#define DBG_REQ         0x0100  /* print out queued request length */
+#define DBG_ALL         0xffff
+#define DBG_NONE        0x0000
+
+#define DEBUG_LEVEL     (DBG_ERR)
+#define DBG(level, fmt, ...)                                    \
+        do {                                                    \
+                if ((level) & DEBUG_LEVEL)                      \
+                        printk(KERN_DEBUG "udc: " fmt, ## __VA_ARGS__); \
+        } while (0)
+#else
+#define DBG(level, fmt...)
+#endif
+
+enum usba_ctrl_state {
+        WAIT_FOR_SETUP,
+        DATA_STAGE_IN,
+        DATA_STAGE_OUT,
+        STATUS_STAGE_IN,
+        STATUS_STAGE_OUT,
+        STATUS_STAGE_ADDR,
+        STATUS_STAGE_TEST,
+};
+/*
+  EP_STATE_IDLE,
+  EP_STATE_SETUP,
+  EP_STATE_IN_DATA,
+  EP_STATE_OUT_DATA,
+  EP_STATE_SET_ADDR_STATUS,
+  EP_STATE_RX_STATUS,
+  EP_STATE_TX_STATUS,
+  EP_STATE_HALT,
+*/
+
+struct usba_dma_desc {
+        dma_addr_t next;
+        dma_addr_t addr;
+        u32 ctrl;
+};
+
+struct usba_ep {
+        int                                     state;
+        void __iomem                            *ep_regs;
+        void __iomem                            *dma_regs;
+        void __iomem                            *fifo;
+        struct usb_ep                           ep;
+        struct usba_udc                         *udc;
+
+        struct list_head                        queue;
+        const struct usb_endpoint_descriptor    *desc;
+
+        u16                                     fifo_size;
+        u8                                      nr_banks;
+        u8                                      index;
+        unsigned int                            can_dma:1;
+        unsigned int                            can_isoc:1;
+        unsigned int                            is_isoc:1;
+        unsigned int                            is_in:1;
+
+#ifdef CONFIG_USB_GADGET_DEBUG_FS
+        u32                                     last_dma_status;
+        struct dentry                           *debugfs_dir;
+        struct dentry                           *debugfs_queue;
+        struct dentry                           *debugfs_dma_status;
+        struct dentry                           *debugfs_state;
+#endif
+};
+
+struct usba_request {
+        struct usb_request                      req;
+        struct list_head                        queue;
+
+        u32                                     ctrl;
+
+        unsigned int                            submitted:1;
+        unsigned int                            last_transaction:1;
+        unsigned int                            using_dma:1;
+        unsigned int                            mapped:1;
+};
+
+struct usba_udc {
+        /* Protect hw registers from concurrent modifications */
+        spinlock_t lock;
+
+        void __iomem *regs;
+        void __iomem *fifo;
+
+        struct usb_gadget gadget;
+        struct usb_gadget_driver *driver;
+        struct platform_device *pdev;
+        int irq;
+        int vbus_pin;
+        struct clk *pclk;
+        struct clk *hclk;
+
+        u16 devstatus;
+
+        u16 test_mode;
+        int vbus_prev;
+
+#ifdef CONFIG_USB_GADGET_DEBUG_FS
+        struct dentry *debugfs_root;
+        struct dentry *debugfs_regs;
+#endif
+};
+
+static inline struct usba_ep *to_usba_ep(struct usb_ep *ep)
+{
+        return container_of(ep, struct usba_ep, ep);
+}
+
+static inline struct usba_request *to_usba_req(struct usb_request *req)
+{
+        return container_of(req, struct usba_request, req);
+}
+
+static inline struct usba_udc *to_usba_udc(struct usb_gadget *gadget)
+{
+        return container_of(gadget, struct usba_udc, gadget);
+}
+
+#define ep_is_control(ep)       ((ep)->index == 0)
+#define ep_is_idle(ep)          ((ep)->state == EP_STATE_IDLE)
+
+#endif /* __LINUX_USB_GADGET_USBA_UDC_H */
diff --git a/drivers/usb/gadget/config.c b/drivers/usb/gadget/config.c
index c6760aee1e5c..a4e54b2743f0 100644
--- a/drivers/usb/gadget/config.c
+++ b/drivers/usb/gadget/config.c
@@ -25,7 +25,7 @@
 #include <linux/device.h>
 
 #include <linux/usb/ch9.h>
-#include <linux/usb_gadget.h>
+#include <linux/usb/gadget.h>
 
 
 /**
diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c
index f2fbdc7fe376..9db2482bdfa2 100644
--- a/drivers/usb/gadget/dummy_hcd.c
+++ b/drivers/usb/gadget/dummy_hcd.c
@@ -34,8 +34,6 @@
  * bypassing some hardware (and driver) issues.  UML could help too.
  */
 
-#define DEBUG
-
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/delay.h>
@@ -48,7 +46,7 @@
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
 #include <linux/usb.h>
-#include <linux/usb_gadget.h>
+#include <linux/usb/gadget.h>
 
 #include <asm/byteorder.h>
 #include <asm/io.h>
@@ -964,13 +962,13 @@ static struct platform_driver dummy_udc_driver = {
 
 static int dummy_urb_enqueue (
         struct usb_hcd                  *hcd,
-        struct usb_host_endpoint        *ep,
         struct urb                      *urb,
         gfp_t                           mem_flags
 ) {
         struct dummy    *dum;
         struct urbp     *urbp;
         unsigned long   flags;
+        int             rc;
 
         if (!urb->transfer_buffer && urb->transfer_buffer_length)
                 return -EINVAL;
@@ -982,6 +980,11 @@ static int dummy_urb_enqueue (
 
         dum = hcd_to_dummy (hcd);
         spin_lock_irqsave (&dum->lock, flags);
+        rc = usb_hcd_link_urb_to_ep(hcd, urb);
+        if (rc) {
+                kfree(urbp);
+                goto done;
+        }
 
         if (!dum->udev) {
                 dum->udev = urb->dev;
@@ -998,36 +1001,35 @@ static int dummy_urb_enqueue (
         if (!timer_pending (&dum->timer))
                 mod_timer (&dum->timer, jiffies + 1);
 
-        spin_unlock_irqrestore (&dum->lock, flags);
-        return 0;
+ done:
+        spin_unlock_irqrestore(&dum->lock, flags);
+        return rc;
 }
 
-static int dummy_urb_dequeue (struct usb_hcd *hcd, struct urb *urb)
+static int dummy_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
 {
         struct dummy    *dum;
         unsigned long   flags;
+        int             rc;
 
         /* giveback happens automatically in timer callback,
          * so make sure the callback happens */
         dum = hcd_to_dummy (hcd);
         spin_lock_irqsave (&dum->lock, flags);
-        if (dum->rh_state != DUMMY_RH_RUNNING && !list_empty(&dum->urbp_list))
+
+        rc = usb_hcd_check_unlink_urb(hcd, urb, status);
+        if (!rc && dum->rh_state != DUMMY_RH_RUNNING &&
+                        !list_empty(&dum->urbp_list))
                 mod_timer (&dum->timer, jiffies);
-        spin_unlock_irqrestore (&dum->lock, flags);
-        return 0;
-}
 
-static void maybe_set_status (struct urb *urb, int status)
-{
-        spin_lock (&urb->lock);
-        if (urb->status == -EINPROGRESS)
-                urb->status = status;
-        spin_unlock (&urb->lock);
+        spin_unlock_irqrestore (&dum->lock, flags);
+        return rc;
 }
 
 /* transfer up to a frame's worth; caller must own lock */
 static int
-transfer (struct dummy *dum, struct urb *urb, struct dummy_ep *ep, int limit)
+transfer(struct dummy *dum, struct urb *urb, struct dummy_ep *ep, int limit,
+                int *status)
 {
         struct dummy_request    *req;
 
@@ -1090,24 +1092,20 @@ top:
                  *
                  * partially filling a buffer optionally blocks queue advances
                  * (so completion handlers can clean up the queue) but we don't
-                 * need to emulate such data-in-flight.  so we only show part
-                 * of the URB_SHORT_NOT_OK effect: completion status.
+                 * need to emulate such data-in-flight.
                  */
                 if (is_short) {
                         if (host_len == dev_len) {
                                 req->req.status = 0;
-                                maybe_set_status (urb, 0);
+                                *status = 0;
                         } else if (to_host) {
                                 req->req.status = 0;
                                 if (dev_len > host_len)
-                                        maybe_set_status (urb, -EOVERFLOW);
+                                        *status = -EOVERFLOW;
                                 else
-                                        maybe_set_status (urb,
-                                                (urb->transfer_flags
-                                                        & URB_SHORT_NOT_OK)
-                                                ? -EREMOTEIO : 0);
+                                        *status = 0;
                         } else if (!to_host) {
-                                maybe_set_status (urb, 0);
+                                *status = 0;
                                 if (host_len > dev_len)
                                         req->req.status = -EOVERFLOW;
                                 else
@@ -1121,9 +1119,8 @@ top:
                                 req->req.status = 0;
                         if (urb->transfer_buffer_length == urb->actual_length
                                         && !(urb->transfer_flags
-                                                & URB_ZERO_PACKET)) {
-                                maybe_set_status (urb, 0);
-                        }
+                                                & URB_ZERO_PACKET))
+                                *status = 0;
                 }
 
                 /* device side completion --> continuable */
@@ -1139,7 +1136,7 @@ top:
                 }
 
                 /* host side completion --> terminate */
-                if (urb->status != -EINPROGRESS)
+                if (*status != -EINPROGRESS)
                         break;
 
                 /* rescan to continue with any other queued i/o */
@@ -1250,12 +1247,12 @@ restart:
                 u8                      address;
                 struct dummy_ep         *ep = NULL;
                 int                     type;
+                int                     status = -EINPROGRESS;
 
                 urb = urbp->urb;
-                if (urb->status != -EINPROGRESS) {
-                        /* likely it was just unlinked */
+                if (urb->unlinked)
                         goto return_urb;
-                } else if (dum->rh_state != DUMMY_RH_RUNNING)
+                else if (dum->rh_state != DUMMY_RH_RUNNING)
                         continue;
                 type = usb_pipetype (urb->pipe);
 
@@ -1276,7 +1273,7 @@ restart:
                         dev_dbg (dummy_dev(dum),
                                 "no ep configured for urb %p\n",
                                 urb);
-                        maybe_set_status (urb, -EPROTO);
+                        status = -EPROTO;
                         goto return_urb;
                 }
 
@@ -1291,7 +1288,7 @@ restart:
                         /* NOTE: must not be iso! */
                         dev_dbg (dummy_dev(dum), "ep %s halted, urb %p\n",
                                         ep->ep.name, urb);
-                        maybe_set_status (urb, -EPIPE);
+                        status = -EPIPE;
                         goto return_urb;
                 }
                 /* FIXME make sure both ends agree on maxpacket */
@@ -1309,7 +1306,7 @@ restart:
                         w_value = le16_to_cpu(setup.wValue);
                         if (le16_to_cpu(setup.wLength) !=
                                         urb->transfer_buffer_length) {
-                                maybe_set_status (urb, -EOVERFLOW);
+                                status = -EOVERFLOW;
                                 goto return_urb;
                         }
 
@@ -1339,7 +1336,7 @@ restart:
                                 if (setup.bRequestType != Dev_Request)
                                         break;
                                 dum->address = w_value;
-                                maybe_set_status (urb, 0);
+                                status = 0;
                                 dev_dbg (udc_dev(dum), "set_address = %d\n",
                                                 w_value);
                                 value = 0;
@@ -1366,7 +1363,7 @@ restart:
                                         if (value == 0) {
                                                 dum->devstatus |=
                                                         (1 << w_value);
-                                                maybe_set_status (urb, 0);
+                                                status = 0;
                                         }
 
                                 } else if (setup.bRequestType == Ep_Request) {
@@ -1378,7 +1375,7 @@ restart:
                                         }
                                         ep2->halted = 1;
                                         value = 0;
-                                        maybe_set_status (urb, 0);
+                                        status = 0;
                                 }
                                 break;
                         case USB_REQ_CLEAR_FEATURE:
@@ -1388,7 +1385,7 @@ restart:
                                                 dum->devstatus &= ~(1 <<
                                                         USB_DEVICE_REMOTE_WAKEUP);
                                                 value = 0;
-                                                maybe_set_status (urb, 0);
+                                                status = 0;
                                                 break;
                                         default:
                                                 value = -EOPNOTSUPP;
@@ -1403,7 +1400,7 @@ restart:
                                         }
                                         ep2->halted = 0;
                                         value = 0;
-                                        maybe_set_status (urb, 0);
+                                        status = 0;
                                 }
                                 break;
                         case USB_REQ_GET_STATUS:
@@ -1440,7 +1437,7 @@ restart:
                                         urb->actual_length = min (2,
                                                 urb->transfer_buffer_length);
                                         value = 0;
-                                        maybe_set_status (urb, 0);
+                                        status = 0;
                                 }
                                 break;
                         }
@@ -1467,7 +1464,7 @@ restart:
                                         dev_dbg (udc_dev(dum),
                                                 "setup --> %d\n",
                                                 value);
-                                maybe_set_status (urb, -EPIPE);
+                                status = -EPIPE;
                                 urb->actual_length = 0;
                         }
 
@@ -1484,7 +1481,7 @@ restart:
                          * report random errors, to debug drivers.
                          */
                         limit = max (limit, periodic_bytes (dum, ep));
-                        maybe_set_status (urb, -ENOSYS);
+                        status = -ENOSYS;
                         break;
 
                 case PIPE_INTERRUPT:
@@ -1498,23 +1495,23 @@ restart:
                 default:
                 treat_control_like_bulk:
                         ep->last_io = jiffies;
-                        total = transfer (dum, urb, ep, limit);
+                        total = transfer(dum, urb, ep, limit, &status);
                         break;
                 }
 
                 /* incomplete transfer? */
-                if (urb->status == -EINPROGRESS)
+                if (status == -EINPROGRESS)
                         continue;
 
 return_urb:
-                urb->hcpriv = NULL;
                 list_del (&urbp->urbp_list);
                 kfree (urbp);
                 if (ep)
                         ep->already_seen = ep->setup_stage = 0;
 
+                usb_hcd_unlink_urb_from_ep(dummy_to_hcd(dum), urb);
                 spin_unlock (&dum->lock);
-                usb_hcd_giveback_urb (dummy_to_hcd(dum), urb);
+                usb_hcd_giveback_urb(dummy_to_hcd(dum), urb, status);
                 spin_lock (&dum->lock);
 
                 goto restart;
diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c
index 3aa46cfa66ba..f9d07108bc30 100644
--- a/drivers/usb/gadget/epautoconf.c
+++ b/drivers/usb/gadget/epautoconf.c
@@ -28,7 +28,7 @@
 #include <linux/string.h>
 
 #include <linux/usb/ch9.h>
-#include <linux/usb_gadget.h>
+#include <linux/usb/gadget.h>
 
 #include "gadget_chips.h"
 
diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c
index 593e23507b1a..9e732bff9df0 100644
--- a/drivers/usb/gadget/ether.c
+++ b/drivers/usb/gadget/ether.c
@@ -19,40 +19,18 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
+/* #define VERBOSE_DEBUG */
 
-// #define DEBUG 1
-// #define VERBOSE
-
-#include <linux/module.h>
 #include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/ioport.h>
-#include <linux/slab.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/timer.h>
-#include <linux/list.h>
-#include <linux/interrupt.h>
 #include <linux/utsname.h>
 #include <linux/device.h>
-#include <linux/moduleparam.h>
 #include <linux/ctype.h>
-
-#include <asm/byteorder.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/system.h>
-#include <asm/uaccess.h>
-#include <asm/unaligned.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
 
 #include <linux/usb/ch9.h>
 #include <linux/usb/cdc.h>
-#include <linux/usb_gadget.h>
-
-#include <linux/random.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/ethtool.h>
+#include <linux/usb/gadget.h>
 
 #include "gadget_chips.h"
 
@@ -356,15 +334,15 @@ module_param (qmult, uint, S_IRUGO|S_IWUSR);
 #define qlen(gadget) \
         (DEFAULT_QLEN*((gadget->speed == USB_SPEED_HIGH) ? qmult : 1))
 
-/* also defer IRQs on highspeed TX */
-#define TX_DELAY        qmult
-
 static inline int BITRATE(struct usb_gadget *g)
 {
         return (g->speed == USB_SPEED_HIGH) ? HS_BPS : FS_BPS;
 }
 
 #else   /* full speed (low speed doesn't do bulk) */
+
+#define qmult           1
+
 #define DEVSPEED        USB_SPEED_FULL
 
 #define qlen(gadget) DEFAULT_QLEN
@@ -390,7 +368,7 @@ static inline int BITRATE(struct usb_gadget *g)
         do { } while (0)
 #endif /* DEBUG */
 
-#ifdef VERBOSE
+#ifdef VERBOSE_DEBUG
 #define VDEBUG  DEBUG
 #else
 #define VDEBUG(dev,fmt,args...) \
@@ -830,8 +808,6 @@ static const struct usb_descriptor_header *fs_rndis_function [] = {
 };
 #endif
 
-#ifdef  CONFIG_USB_GADGET_DUALSPEED
-
 /*
  * usb 2.0 devices need to expose both high speed and full speed
  * descriptors, unless they only run at full speed.
@@ -934,18 +910,15 @@ static const struct usb_descriptor_header *hs_rndis_function [] = {
 
 
 /* maxpacket and other transfer characteristics vary by speed. */
-#define ep_desc(g,hs,fs) (((g)->speed==USB_SPEED_HIGH)?(hs):(fs))
-
-#else
-
-/* if there's no high speed support, maxpacket doesn't change. */
-#define ep_desc(g,hs,fs) (((void)(g)), (fs))
-
-static inline void __init hs_subset_descriptors(void)
+static inline struct usb_endpoint_descriptor *
+ep_desc(struct usb_gadget *g, struct usb_endpoint_descriptor *hs,
+                struct usb_endpoint_descriptor *fs)
 {
+        if (gadget_is_dualspeed(g) && g->speed == USB_SPEED_HIGH)
+                return hs;
+        return fs;
 }
 
-#endif  /* !CONFIG_USB_GADGET_DUALSPEED */
 
 /*-------------------------------------------------------------------------*/
 
@@ -989,22 +962,19 @@ static struct usb_gadget_strings	stringtab = {
  * complications: class descriptors, and an altsetting.
  */
 static int
-config_buf (enum usb_device_speed speed,
-        u8 *buf, u8 type,
-        unsigned index, int is_otg)
+config_buf(struct usb_gadget *g, u8 *buf, u8 type, unsigned index, int is_otg)
 {
         int                                     len;
         const struct usb_config_descriptor      *config;
         const struct usb_descriptor_header      **function;
-#ifdef CONFIG_USB_GADGET_DUALSPEED
-        int                             hs = (speed == USB_SPEED_HIGH);
+        int                                     hs = 0;
 
-        if (type == USB_DT_OTHER_SPEED_CONFIG)
-                hs = !hs;
+        if (gadget_is_dualspeed(g)) {
+                hs = (g->speed == USB_SPEED_HIGH);
+                if (type == USB_DT_OTHER_SPEED_CONFIG)
+                        hs = !hs;
+        }
 #define which_fn(t)     (hs ? hs_ ## t ## _function : fs_ ## t ## _function)
-#else
-#define which_fn(t)     (fs_ ## t ## _function)
-#endif
 
         if (index >= device_desc.bNumConfigurations)
                 return -EINVAL;
@@ -1217,7 +1187,7 @@ eth_set_config (struct eth_dev *dev, unsigned number, gfp_t gfp_flags)
                 if (number)
                         eth_reset_config (dev);
                 usb_gadget_vbus_draw(dev->gadget,
-                                dev->gadget->is_otg ? 8 : 100);
+                                gadget_is_otg(dev->gadget) ? 8 : 100);
         } else {
                 char *speed;
                 unsigned power;
@@ -1399,24 +1369,22 @@ eth_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
                         value = min (wLength, (u16) sizeof device_desc);
                         memcpy (req->buf, &device_desc, value);
                         break;
-#ifdef CONFIG_USB_GADGET_DUALSPEED
                 case USB_DT_DEVICE_QUALIFIER:
-                        if (!gadget->is_dualspeed)
+                        if (!gadget_is_dualspeed(gadget))
                                 break;
                         value = min (wLength, (u16) sizeof dev_qualifier);
                         memcpy (req->buf, &dev_qualifier, value);
                         break;
 
                 case USB_DT_OTHER_SPEED_CONFIG:
-                        if (!gadget->is_dualspeed)
+                        if (!gadget_is_dualspeed(gadget))
                                 break;
                         // FALLTHROUGH
-#endif /* CONFIG_USB_GADGET_DUALSPEED */
                 case USB_DT_CONFIG:
-                        value = config_buf (gadget->speed, req->buf,
+                        value = config_buf(gadget, req->buf,
                                         wValue >> 8,
                                         wValue & 0xff,
-                                        gadget->is_otg);
+                                        gadget_is_otg(gadget));
                         if (value >= 0)
                                 value = min (wLength, (u16) value);
                         break;
@@ -1585,12 +1553,12 @@ done_set_intf:
                                 && rndis_control_intf.bInterfaceNumber
                                         == wIndex) {
                         u8 *buf;
+                        u32 n;
 
                         /* return the result */
-                        buf = rndis_get_next_response (dev->rndis_config,
-                                                       &value);
+                        buf = rndis_get_next_response(dev->rndis_config, &n);
                         if (buf) {
-                                memcpy (req->buf, buf, value);
+                                memcpy(req->buf, buf, n);
                                 req->complete = rndis_response_complete;
                                 rndis_free_response(dev->rndis_config, buf);
                         }
@@ -1989,8 +1957,20 @@ static int eth_start_xmit (struct sk_buff *skb, struct net_device *net)
         }
 
         spin_lock_irqsave(&dev->req_lock, flags);
+        /*
+         * this freelist can be empty if an interrupt triggered disconnect()
+         * and reconfigured the gadget (shutting down this queue) after the
+         * network stack decided to xmit but before we got the spinlock.
+         */
+        if (list_empty(&dev->tx_reqs)) {
+                spin_unlock_irqrestore(&dev->req_lock, flags);
+                return 1;
+        }
+
         req = container_of (dev->tx_reqs.next, struct usb_request, list);
         list_del (&req->list);
+
+        /* temporarily stop TX queue when the freelist empties */
         if (list_empty (&dev->tx_reqs))
                 netif_stop_queue (net);
         spin_unlock_irqrestore(&dev->req_lock, flags);
@@ -2026,12 +2006,11 @@ static int eth_start_xmit (struct sk_buff *skb, struct net_device *net)
 
         req->length = length;
 
-#ifdef  CONFIG_USB_GADGET_DUALSPEED
         /* throttle highspeed IRQ rate back slightly */
-        req->no_interrupt = (dev->gadget->speed == USB_SPEED_HIGH)
-                ? ((atomic_read (&dev->tx_qlen) % TX_DELAY) != 0)
-                : 0;
-#endif
+        if (gadget_is_dualspeed(dev->gadget))
+                req->no_interrupt = (dev->gadget->speed == USB_SPEED_HIGH)
+                        ? ((atomic_read(&dev->tx_qlen) % qmult) != 0)
+                        : 0;
 
         retval = usb_ep_queue (dev->in_ep, req, GFP_ATOMIC);
         switch (retval) {
@@ -2188,8 +2167,7 @@ static int eth_stop (struct net_device *net)
         }
 
         if (rndis_active(dev)) {
-                rndis_set_param_medium (dev->rndis_config,
-                                        NDIS_MEDIUM_802_3, 0);
+                rndis_set_param_medium(dev->rndis_config, NDIS_MEDIUM_802_3, 0);
                 (void) rndis_signal_disconnect (dev->rndis_config);
         }
 
@@ -2443,26 +2421,28 @@ autoconf_fail:
         if (rndis)
                 device_desc.bNumConfigurations = 2;
 
-#ifdef  CONFIG_USB_GADGET_DUALSPEED
-        if (rndis)
-                dev_qualifier.bNumConfigurations = 2;
-        else if (!cdc)
-                dev_qualifier.bDeviceClass = USB_CLASS_VENDOR_SPEC;
+        if (gadget_is_dualspeed(gadget)) {
+                if (rndis)
+                        dev_qualifier.bNumConfigurations = 2;
+                else if (!cdc)
+                        dev_qualifier.bDeviceClass = USB_CLASS_VENDOR_SPEC;
 
-        /* assumes ep0 uses the same value for both speeds ... */
-        dev_qualifier.bMaxPacketSize0 = device_desc.bMaxPacketSize0;
+                /* assumes ep0 uses the same value for both speeds ... */
+                dev_qualifier.bMaxPacketSize0 = device_desc.bMaxPacketSize0;
 
-        /* and that all endpoints are dual-speed */
-        hs_source_desc.bEndpointAddress = fs_source_desc.bEndpointAddress;
-        hs_sink_desc.bEndpointAddress = fs_sink_desc.bEndpointAddress;
+                /* and that all endpoints are dual-speed */
+                hs_source_desc.bEndpointAddress =
+                                fs_source_desc.bEndpointAddress;
+                hs_sink_desc.bEndpointAddress =
+                                fs_sink_desc.bEndpointAddress;
 #if defined(DEV_CONFIG_CDC) || defined(CONFIG_USB_ETH_RNDIS)
-        if (status_ep)
-                hs_status_desc.bEndpointAddress =
-                                fs_status_desc.bEndpointAddress;
+                if (status_ep)
+                        hs_status_desc.bEndpointAddress =
+                                        fs_status_desc.bEndpointAddress;
 #endif
-#endif  /* DUALSPEED */
+        }
 
-        if (gadget->is_otg) {
+        if (gadget_is_otg(gadget)) {
                 otg_descriptor.bmAttributes |= USB_OTG_HNP,
                 eth_config.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
                 eth_config.bMaxPower = 4;
@@ -2484,7 +2464,6 @@ autoconf_fail:
 
         /* network device setup */
         dev->net = net;
-        SET_MODULE_OWNER (net);
         strcpy (net->name, "usb%d");
         dev->cdc = cdc;
         dev->zlp = zlp;
@@ -2599,12 +2578,11 @@ fail0:
                 if (rndis_set_param_dev (dev->rndis_config, dev->net,
                                          &dev->stats, &dev->cdc_filter))
                         goto fail0;
-                if (rndis_set_param_vendor (dev->rndis_config, vendorID,
-                                            manufacturer))
+                if (rndis_set_param_vendor(dev->rndis_config, vendorID,
+                                        manufacturer))
                         goto fail0;
-                if (rndis_set_param_medium (dev->rndis_config,
-                                            NDIS_MEDIUM_802_3,
-                                            0))
+                if (rndis_set_param_medium(dev->rndis_config,
+                                        NDIS_MEDIUM_802_3, 0))
                         goto fail0;
                 INFO (dev, "RNDIS ready\n");
         }
diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c
index be7a1bd2823b..73726c570a6e 100644
--- a/drivers/usb/gadget/file_storage.c
+++ b/drivers/usb/gadget/file_storage.c
@@ -1,7 +1,7 @@
 /*
  * file_storage.c -- File-backed USB Storage Gadget, for USB development
  *
- * Copyright (C) 2003-2005 Alan Stern
+ * Copyright (C) 2003-2007 Alan Stern
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -217,17 +217,11 @@
  */
 
 
-#undef DEBUG
-#undef VERBOSE
-#undef DUMP_MSGS
-
+/* #define VERBOSE_DEBUG */
+/* #define DUMP_MSGS */
 
-#include <asm/system.h>
-#include <asm/uaccess.h>
 
-#include <linux/bitops.h>
 #include <linux/blkdev.h>
-#include <linux/compiler.h>
 #include <linux/completion.h>
 #include <linux/dcache.h>
 #include <linux/delay.h>
@@ -235,18 +229,10 @@
 #include <linux/fcntl.h>
 #include <linux/file.h>
 #include <linux/fs.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
 #include <linux/kref.h>
 #include <linux/kthread.h>
 #include <linux/limits.h>
-#include <linux/list.h>
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/pagemap.h>
 #include <linux/rwsem.h>
-#include <linux/sched.h>
-#include <linux/signal.h>
 #include <linux/slab.h>
 #include <linux/spinlock.h>
 #include <linux/string.h>
@@ -254,7 +240,7 @@
 #include <linux/utsname.h>
 
 #include <linux/usb/ch9.h>
-#include <linux/usb_gadget.h>
+#include <linux/usb/gadget.h>
 
 #include "gadget_chips.h"
 
@@ -263,7 +249,7 @@
 
 #define DRIVER_DESC             "File-backed Storage Gadget"
 #define DRIVER_NAME             "g_file_storage"
-#define DRIVER_VERSION          "28 November 2005"
+#define DRIVER_VERSION          "7 August 2007"
 
 static const char longname[] = DRIVER_DESC;
 static const char shortname[] = DRIVER_NAME;
@@ -289,57 +275,48 @@ MODULE_LICENSE("Dual BSD/GPL");
 
 /*-------------------------------------------------------------------------*/
 
-#define xprintk(f,level,fmt,args...) \
-        dev_printk(level , &(f)->gadget->dev , fmt , ## args)
-#define yprintk(l,level,fmt,args...) \
-        dev_printk(level , &(l)->dev , fmt , ## args)
-
 #ifdef DEBUG
-#define DBG(fsg,fmt,args...) \
-        xprintk(fsg , KERN_DEBUG , fmt , ## args)
 #define LDBG(lun,fmt,args...) \
-        yprintk(lun , KERN_DEBUG , fmt , ## args)
+        dev_dbg(&(lun)->dev , fmt , ## args)
 #define MDBG(fmt,args...) \
         printk(KERN_DEBUG DRIVER_NAME ": " fmt , ## args)
 #else
-#define DBG(fsg,fmt,args...) \
-        do { } while (0)
 #define LDBG(lun,fmt,args...) \
         do { } while (0)
 #define MDBG(fmt,args...) \
         do { } while (0)
-#undef VERBOSE
+#undef VERBOSE_DEBUG
 #undef DUMP_MSGS
 #endif /* DEBUG */
 
-#ifdef VERBOSE
-#define VDBG    DBG
+#ifdef VERBOSE_DEBUG
 #define VLDBG   LDBG
 #else
-#define VDBG(fsg,fmt,args...) \
-        do { } while (0)
 #define VLDBG(lun,fmt,args...) \
         do { } while (0)
-#endif /* VERBOSE */
+#endif /* VERBOSE_DEBUG */
 
-#define ERROR(fsg,fmt,args...) \
-        xprintk(fsg , KERN_ERR , fmt , ## args)
 #define LERROR(lun,fmt,args...) \
-        yprintk(lun , KERN_ERR , fmt , ## args)
-
-#define WARN(fsg,fmt,args...) \
-        xprintk(fsg , KERN_WARNING , fmt , ## args)
+        dev_err(&(lun)->dev , fmt , ## args)
 #define LWARN(lun,fmt,args...) \
-        yprintk(lun , KERN_WARNING , fmt , ## args)
-
-#define INFO(fsg,fmt,args...) \
-        xprintk(fsg , KERN_INFO , fmt , ## args)
+        dev_warn(&(lun)->dev , fmt , ## args)
 #define LINFO(lun,fmt,args...) \
-        yprintk(lun , KERN_INFO , fmt , ## args)
+        dev_info(&(lun)->dev , fmt , ## args)
 
 #define MINFO(fmt,args...) \
         printk(KERN_INFO DRIVER_NAME ": " fmt , ## args)
 
+#define DBG(d, fmt, args...) \
+        dev_dbg(&(d)->gadget->dev , fmt , ## args)
+#define VDBG(d, fmt, args...) \
+        dev_vdbg(&(d)->gadget->dev , fmt , ## args)
+#define ERROR(d, fmt, args...) \
+        dev_err(&(d)->gadget->dev , fmt , ## args)
+#define WARN(d, fmt, args...) \
+        dev_warn(&(d)->gadget->dev , fmt , ## args)
+#define INFO(d, fmt, args...) \
+        dev_info(&(d)->gadget->dev , fmt , ## args)
+
 
 /*-------------------------------------------------------------------------*/
 
@@ -350,8 +327,8 @@ MODULE_LICENSE("Dual BSD/GPL");
 static struct {
         char            *file[MAX_LUNS];
         int             ro[MAX_LUNS];
-        int             num_filenames;
-        int             num_ros;
+        unsigned int    num_filenames;
+        unsigned int    num_ros;
         unsigned int    nluns;
 
         int             removable;
@@ -578,7 +555,7 @@ struct lun {
 
 #define backing_file_is_open(curlun)    ((curlun)->filp != NULL)
 
-static inline struct lun *dev_to_lun(struct device *dev)
+static struct lun *dev_to_lun(struct device *dev)
 {
         return container_of(dev, struct lun, dev);
 }
@@ -599,7 +576,6 @@ enum fsg_buffer_state {
 
 struct fsg_buffhd {
         void                            *buf;
-        dma_addr_t                      dma;
         enum fsg_buffer_state           state;
         struct fsg_buffhd               *next;
 
@@ -712,13 +688,13 @@ struct fsg_dev {
 
 typedef void (*fsg_routine_t)(struct fsg_dev *);
 
-static int inline exception_in_progress(struct fsg_dev *fsg)
+static int exception_in_progress(struct fsg_dev *fsg)
 {
         return (fsg->state > FSG_STATE_IDLE);
 }
 
 /* Make bulk-out requests be divisible by the maxpacket size */
-static void inline set_bulk_out_req_length(struct fsg_dev *fsg,
+static void set_bulk_out_req_length(struct fsg_dev *fsg,
                 struct fsg_buffhd *bh, unsigned int length)
 {
         unsigned int    rem;
@@ -744,50 +720,36 @@ static void	close_all_backing_files(struct fsg_dev *fsg);
 static void dump_msg(struct fsg_dev *fsg, const char *label,
                 const u8 *buf, unsigned int length)
 {
-        unsigned int    start, num, i;
-        char            line[52], *p;
-
-        if (length >= 512)
-                return;
-        DBG(fsg, "%s, length %u:\n", label, length);
-
-        start = 0;
-        while (length > 0) {
-                num = min(length, 16u);
-                p = line;
-                for (i = 0; i < num; ++i) {
-                        if (i == 8)
-                                *p++ = ' ';
-                        sprintf(p, " %02x", buf[i]);
-                        p += 3;
-                }
-                *p = 0;
-                printk(KERN_DEBUG "%6x: %s\n", start, line);
-                buf += num;
-                start += num;
-                length -= num;
+        if (length < 512) {
+                DBG(fsg, "%s, length %u:\n", label, length);
+                print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET,
+                                16, 1, buf, length, 0);
         }
 }
 
-static void inline dump_cdb(struct fsg_dev *fsg)
+static void dump_cdb(struct fsg_dev *fsg)
 {}
 
 #else
 
-static void inline dump_msg(struct fsg_dev *fsg, const char *label,
+static void dump_msg(struct fsg_dev *fsg, const char *label,
                 const u8 *buf, unsigned int length)
 {}
 
-static void inline dump_cdb(struct fsg_dev *fsg)
-{
-        int     i;
-        char    cmdbuf[3*MAX_COMMAND_SIZE + 1];
+#ifdef VERBOSE_DEBUG
 
-        for (i = 0; i < fsg->cmnd_size; ++i)
-                sprintf(cmdbuf + i*3, " %02x", fsg->cmnd[i]);
-        VDBG(fsg, "SCSI CDB: %s\n", cmdbuf);
+static void dump_cdb(struct fsg_dev *fsg)
+{
+        print_hex_dump(KERN_DEBUG, "SCSI CDB: ", DUMP_PREFIX_NONE,
+                        16, 1, fsg->cmnd, fsg->cmnd_size, 0);
 }
 
+#else
+
+static void dump_cdb(struct fsg_dev *fsg)
+{}
+
+#endif /* VERBOSE_DEBUG */
 #endif /* DUMP_MSGS */
 
 
@@ -810,24 +772,24 @@ static int fsg_set_halt(struct fsg_dev *fsg, struct usb_ep *ep)
 
 /* Routines for unaligned data access */
 
-static u16 inline get_be16(u8 *buf)
+static u16 get_be16(u8 *buf)
 {
         return ((u16) buf[0] << 8) | ((u16) buf[1]);
 }
 
-static u32 inline get_be32(u8 *buf)
+static u32 get_be32(u8 *buf)
 {
         return ((u32) buf[0] << 24) | ((u32) buf[1] << 16) |
                         ((u32) buf[2] << 8) | ((u32) buf[3]);
 }
 
-static void inline put_be16(u8 *buf, u16 val)
+static void put_be16(u8 *buf, u16 val)
 {
         buf[0] = val >> 8;
         buf[1] = val;
 }
 
-static void inline put_be32(u8 *buf, u32 val)
+static void put_be32(u8 *buf, u32 val)
 {
         buf[0] = val >> 24;
         buf[1] = val >> 16;
@@ -951,8 +913,6 @@ static const struct usb_descriptor_header *fs_function[] = {
 #define FS_FUNCTION_PRE_EP_ENTRIES      2
 
 
-#ifdef  CONFIG_USB_GADGET_DUALSPEED
-
 /*
  * USB 2.0 devices need to expose both high speed and full speed
  * descriptors, unless they only run at full speed.
@@ -1015,14 +975,14 @@ static const struct usb_descriptor_header *hs_function[] = {
 #define HS_FUNCTION_PRE_EP_ENTRIES      2
 
 /* Maxpacket and other transfer characteristics vary by speed. */
-#define ep_desc(g,fs,hs)        (((g)->speed==USB_SPEED_HIGH) ? (hs) : (fs))
-
-#else
-
-/* If there's no high speed support, always use the full-speed descriptor. */
-#define ep_desc(g,fs,hs)        fs
-
-#endif  /* !CONFIG_USB_GADGET_DUALSPEED */
+static struct usb_endpoint_descriptor *
+ep_desc(struct usb_gadget *g, struct usb_endpoint_descriptor *fs,
+                struct usb_endpoint_descriptor *hs)
+{
+        if (gadget_is_dualspeed(g) && g->speed == USB_SPEED_HIGH)
+                return hs;
+        return fs;
+}
 
 
 /* The CBI specification limits the serial string to 12 uppercase hexadecimal
@@ -1054,26 +1014,22 @@ static struct usb_gadget_strings	stringtab = {
 static int populate_config_buf(struct usb_gadget *gadget,
                 u8 *buf, u8 type, unsigned index)
 {
-#ifdef CONFIG_USB_GADGET_DUALSPEED
         enum usb_device_speed                   speed = gadget->speed;
-#endif
         int                                     len;
         const struct usb_descriptor_header      **function;
 
         if (index > 0)
                 return -EINVAL;
 
-#ifdef CONFIG_USB_GADGET_DUALSPEED
-        if (type == USB_DT_OTHER_SPEED_CONFIG)
+        if (gadget_is_dualspeed(gadget) && type == USB_DT_OTHER_SPEED_CONFIG)
                 speed = (USB_SPEED_FULL + USB_SPEED_HIGH) - speed;
-        if (speed == USB_SPEED_HIGH)
+        if (gadget_is_dualspeed(gadget) && speed == USB_SPEED_HIGH)
                 function = hs_function;
         else
-#endif
                 function = fs_function;
 
         /* for now, don't advertise srp-only devices */
-        if (!gadget->is_otg)
+        if (!gadget_is_otg(gadget))
                 function++;
 
         len = usb_gadget_config_buf(&config_desc, buf, EP0_BUFSIZE, function);
@@ -1295,6 +1251,7 @@ static int class_setup_req(struct fsg_dev *fsg,
         struct usb_request      *req = fsg->ep0req;
         int                     value = -EOPNOTSUPP;
         u16                     w_index = le16_to_cpu(ctrl->wIndex);
+        u16                     w_value = le16_to_cpu(ctrl->wValue);
         u16                     w_length = le16_to_cpu(ctrl->wLength);
 
         if (!fsg->config)
@@ -1308,7 +1265,7 @@ static int class_setup_req(struct fsg_dev *fsg,
                         if (ctrl->bRequestType != (USB_DIR_OUT |
                                         USB_TYPE_CLASS | USB_RECIP_INTERFACE))
                                 break;
-                        if (w_index != 0) {
+                        if (w_index != 0 || w_value != 0) {
                                 value = -EDOM;
                                 break;
                         }
@@ -1324,7 +1281,7 @@ static int class_setup_req(struct fsg_dev *fsg,
                         if (ctrl->bRequestType != (USB_DIR_IN |
                                         USB_TYPE_CLASS | USB_RECIP_INTERFACE))
                                 break;
-                        if (w_index != 0) {
+                        if (w_index != 0 || w_value != 0) {
                                 value = -EDOM;
                                 break;
                         }
@@ -1343,7 +1300,7 @@ static int class_setup_req(struct fsg_dev *fsg,
                         if (ctrl->bRequestType != (USB_DIR_OUT |
                                         USB_TYPE_CLASS | USB_RECIP_INTERFACE))
                                 break;
-                        if (w_index != 0) {
+                        if (w_index != 0 || w_value != 0) {
                                 value = -EDOM;
                                 break;
                         }
@@ -1394,10 +1351,9 @@ static int standard_setup_req(struct fsg_dev *fsg,
                         value = sizeof device_desc;
                         memcpy(req->buf, &device_desc, value);
                         break;
-#ifdef CONFIG_USB_GADGET_DUALSPEED
                 case USB_DT_DEVICE_QUALIFIER:
                         VDBG(fsg, "get device qualifier\n");
-                        if (!fsg->gadget->is_dualspeed)
+                        if (!gadget_is_dualspeed(fsg->gadget))
                                 break;
                         value = sizeof dev_qualifier;
                         memcpy(req->buf, &dev_qualifier, value);
@@ -1405,15 +1361,12 @@ static int standard_setup_req(struct fsg_dev *fsg,
 
                 case USB_DT_OTHER_SPEED_CONFIG:
                         VDBG(fsg, "get other-speed config descriptor\n");
-                        if (!fsg->gadget->is_dualspeed)
+                        if (!gadget_is_dualspeed(fsg->gadget))
                                 break;
                         goto get_config;
-#endif
                 case USB_DT_CONFIG:
                         VDBG(fsg, "get configuration descriptor\n");
-#ifdef CONFIG_USB_GADGET_DUALSPEED
-                get_config:
-#endif
+get_config:
                         value = populate_config_buf(fsg->gadget,
                                         req->buf,
                                         w_value >> 8,
@@ -1646,7 +1599,8 @@ static int do_read(struct fsg_dev *fsg)
                 /* Wait for the next buffer to become available */
                 bh = fsg->next_buffhd_to_fill;
                 while (bh->state != BUF_STATE_EMPTY) {
-                        if ((rc = sleep_thread(fsg)) != 0)
+                        rc = sleep_thread(fsg);
+                        if (rc)
                                 return rc;
                 }
 
@@ -1885,7 +1839,8 @@ static int do_write(struct fsg_dev *fsg)
                 }
 
                 /* Wait for something to happen */
-                if ((rc = sleep_thread(fsg)) != 0)
+                rc = sleep_thread(fsg);
+                if (rc)
                         return rc;
         }
 
@@ -2369,7 +2324,8 @@ static int pad_with_zeros(struct fsg_dev *fsg)
 
                 /* Wait for the next buffer to be free */
                 while (bh->state != BUF_STATE_EMPTY) {
-                        if ((rc = sleep_thread(fsg)) != 0)
+                        rc = sleep_thread(fsg);
+                        if (rc)
                                 return rc;
                 }
 
@@ -2429,7 +2385,8 @@ static int throw_away_data(struct fsg_dev *fsg)
                 }
 
                 /* Otherwise wait for something to happen */
-                if ((rc = sleep_thread(fsg)) != 0)
+                rc = sleep_thread(fsg);
+                if (rc)
                         return rc;
         }
         return 0;
@@ -2551,7 +2508,8 @@ static int send_status(struct fsg_dev *fsg)
         /* Wait for the next buffer to become available */
         bh = fsg->next_buffhd_to_fill;
         while (bh->state != BUF_STATE_EMPTY) {
-                if ((rc = sleep_thread(fsg)) != 0)
+                rc = sleep_thread(fsg);
+                if (rc)
                         return rc;
         }
 
@@ -2611,7 +2569,6 @@ static int send_status(struct fsg_dev *fsg)
 
                 fsg->intr_buffhd = bh;          // Point to the right buffhd
                 fsg->intreq->buf = bh->inreq->buf;
-                fsg->intreq->dma = bh->inreq->dma;
                 fsg->intreq->context = bh;
                 start_transfer(fsg, fsg->intr_in, fsg->intreq,
                                 &fsg->intreq_busy, &bh->state);
@@ -2772,9 +2729,10 @@ static int do_scsi_command(struct fsg_dev *fsg)
         /* Wait for the next buffer to become available for data or status */
         bh = fsg->next_buffhd_to_drain = fsg->next_buffhd_to_fill;
         while (bh->state != BUF_STATE_EMPTY) {
-                if ((rc = sleep_thread(fsg)) != 0)
+                rc = sleep_thread(fsg);
+                if (rc)
                         return rc;
-                }
+        }
         fsg->phase_error = 0;
         fsg->short_packet_received = 0;
 
@@ -3006,7 +2964,7 @@ static int received_cbw(struct fsg_dev *fsg, struct fsg_buffhd *bh)
 
         /* Is the CBW meaningful? */
         if (cbw->Lun >= MAX_LUNS || cbw->Flags & ~USB_BULK_IN_FLAG ||
-                        cbw->Length < 6 || cbw->Length > MAX_COMMAND_SIZE) {
+                        cbw->Length <= 0 || cbw->Length > MAX_COMMAND_SIZE) {
                 DBG(fsg, "non-meaningful CBW: lun = %u, flags = 0x%x, "
                                 "cmdlen %u\n",
                                 cbw->Lun, cbw->Flags, cbw->Length);
@@ -3046,9 +3004,10 @@ static int get_next_command(struct fsg_dev *fsg)
                 /* Wait for the next buffer to become available */
                 bh = fsg->next_buffhd_to_fill;
                 while (bh->state != BUF_STATE_EMPTY) {
-                        if ((rc = sleep_thread(fsg)) != 0)
+                        rc = sleep_thread(fsg);
+                        if (rc)
                                 return rc;
-                        }
+                }
 
                 /* Queue a request to read a Bulk-only CBW */
                 set_bulk_out_req_length(fsg, bh, USB_BULK_CB_WRAP_LEN);
@@ -3062,9 +3021,10 @@ static int get_next_command(struct fsg_dev *fsg)
 
                 /* Wait for the CBW to arrive */
                 while (bh->state != BUF_STATE_FULL) {
-                        if ((rc = sleep_thread(fsg)) != 0)
+                        rc = sleep_thread(fsg);
+                        if (rc)
                                 return rc;
-                        }
+                }
                 smp_rmb();
                 rc = received_cbw(fsg, bh);
                 bh->state = BUF_STATE_EMPTY;
@@ -3073,9 +3033,10 @@ static int get_next_command(struct fsg_dev *fsg)
 
                 /* Wait for the next command to arrive */
                 while (fsg->cbbuf_cmnd_size == 0) {
-                        if ((rc = sleep_thread(fsg)) != 0)
+                        rc = sleep_thread(fsg);
+                        if (rc)
                                 return rc;
-                        }
+                }
 
                 /* Is the previous status interrupt request still busy?
                  * The host is allowed to skip reading the status,
@@ -3200,7 +3161,6 @@ reset:
                 if ((rc = alloc_request(fsg, fsg->bulk_out, &bh->outreq)) != 0)
                         goto reset;
                 bh->inreq->buf = bh->outreq->buf = bh->buf;
-                bh->inreq->dma = bh->outreq->dma = bh->dma;
                 bh->inreq->context = bh->outreq->context = bh;
                 bh->inreq->complete = bulk_in_complete;
                 bh->outreq->complete = bulk_out_complete;
@@ -3597,7 +3557,8 @@ static ssize_t show_ro(struct device *dev, struct device_attribute *attr, char *
         return sprintf(buf, "%d\n", curlun->ro);
 }
 
-static ssize_t show_file(struct device *dev, struct device_attribute *attr, char *buf)
+static ssize_t show_file(struct device *dev, struct device_attribute *attr,
+                char *buf)
 {
         struct lun      *curlun = dev_to_lun(dev);
         struct fsg_dev  *fsg = dev_get_drvdata(dev);
@@ -3606,8 +3567,8 @@ static ssize_t show_file(struct device *dev, struct device_attribute *attr, char
 
         down_read(&fsg->filesem);
         if (backing_file_is_open(curlun)) {     // Get the complete pathname
-                p = d_path(curlun->filp->f_path.dentry, curlun->filp->f_path.mnt,
-                                buf, PAGE_SIZE - 1);
+                p = d_path(curlun->filp->f_path.dentry,
+                                curlun->filp->f_path.mnt, buf, PAGE_SIZE - 1);
                 if (IS_ERR(p))
                         rc = PTR_ERR(p);
                 else {
@@ -3625,7 +3586,8 @@ static ssize_t show_file(struct device *dev, struct device_attribute *attr, char
 }
 
 
-static ssize_t store_ro(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+static ssize_t store_ro(struct device *dev, struct device_attribute *attr,
+                const char *buf, size_t count)
 {
         ssize_t         rc = count;
         struct lun      *curlun = dev_to_lun(dev);
@@ -3649,7 +3611,8 @@ static ssize_t store_ro(struct device *dev, struct device_attribute *attr, const
         return rc;
 }
 
-static ssize_t store_file(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+static ssize_t store_file(struct device *dev, struct device_attribute *attr,
+                const char *buf, size_t count)
 {
         struct lun      *curlun = dev_to_lun(dev);
         struct fsg_dev  *fsg = dev_get_drvdata(dev);
@@ -3861,7 +3824,7 @@ static int __init fsg_bind(struct usb_gadget *gadget)
         /* Find out how many LUNs there should be */
         i = mod_data.nluns;
         if (i == 0)
-                i = max(mod_data.num_filenames, 1);
+                i = max(mod_data.num_filenames, 1u);
         if (i > MAX_LUNS) {
                 ERROR(fsg, "invalid number of LUNs: %d\n", i);
                 rc = -EINVAL;
@@ -3946,21 +3909,23 @@ static int __init fsg_bind(struct usb_gadget *gadget)
         intf_desc.bInterfaceProtocol = mod_data.transport_type;
         fs_function[i + FS_FUNCTION_PRE_EP_ENTRIES] = NULL;
 
-#ifdef CONFIG_USB_GADGET_DUALSPEED
-        hs_function[i + HS_FUNCTION_PRE_EP_ENTRIES] = NULL;
+        if (gadget_is_dualspeed(gadget)) {
+                hs_function[i + HS_FUNCTION_PRE_EP_ENTRIES] = NULL;
 
-        /* Assume ep0 uses the same maxpacket value for both speeds */
-        dev_qualifier.bMaxPacketSize0 = fsg->ep0->maxpacket;
+                /* Assume ep0 uses the same maxpacket value for both speeds */
+                dev_qualifier.bMaxPacketSize0 = fsg->ep0->maxpacket;
 
-        /* Assume that all endpoint addresses are the same for both speeds */
-        hs_bulk_in_desc.bEndpointAddress = fs_bulk_in_desc.bEndpointAddress;
-        hs_bulk_out_desc.bEndpointAddress = fs_bulk_out_desc.bEndpointAddress;
-        hs_intr_in_desc.bEndpointAddress = fs_intr_in_desc.bEndpointAddress;
-#endif
+                /* Assume endpoint addresses are the same for both speeds */
+                hs_bulk_in_desc.bEndpointAddress =
+                                fs_bulk_in_desc.bEndpointAddress;
+                hs_bulk_out_desc.bEndpointAddress =
+                                fs_bulk_out_desc.bEndpointAddress;
+                hs_intr_in_desc.bEndpointAddress =
+                                fs_intr_in_desc.bEndpointAddress;
+        }
 
-        if (gadget->is_otg) {
+        if (gadget_is_otg(gadget))
                 otg_desc.bmAttributes |= USB_OTG_HNP;
-        }
 
         rc = -ENOMEM;
 
diff --git a/drivers/usb/gadget/fsl_usb2_udc.c b/drivers/usb/gadget/fsl_usb2_udc.c
index 10b2b33b8698..9bb7f64a85cd 100644
--- a/drivers/usb/gadget/fsl_usb2_udc.c
+++ b/drivers/usb/gadget/fsl_usb2_udc.c
@@ -35,7 +35,7 @@
 #include <linux/moduleparam.h>
 #include <linux/device.h>
 #include <linux/usb/ch9.h>
-#include <linux/usb_gadget.h>
+#include <linux/usb/gadget.h>
 #include <linux/usb/otg.h>
 #include <linux/dma-mapping.h>
 #include <linux/platform_device.h>
@@ -1090,14 +1090,11 @@ static int fsl_vbus_session(struct usb_gadget *gadget, int is_active)
  */
 static int fsl_vbus_draw(struct usb_gadget *gadget, unsigned mA)
 {
-#ifdef CONFIG_USB_OTG
         struct fsl_udc *udc;
 
         udc = container_of(gadget, struct fsl_udc, gadget);
-
         if (udc->transceiver)
                 return otg_set_power(udc->transceiver, mA);
-#endif
         return -ENOTSUPP;
 }
 
@@ -1120,7 +1117,7 @@ static int fsl_pullup(struct usb_gadget *gadget, int is_on)
         return 0;
 }
 
-/* defined in usb_gadget.h */
+/* defined in gadget.h */
 static struct usb_gadget_ops fsl_gadget_ops = {
         .get_frame = fsl_get_frame,
         .wakeup = fsl_wakeup,
@@ -1277,31 +1274,32 @@ static void setup_received_irq(struct fsl_udc *udc,
 
         udc_reset_ep_queue(udc, 0);
 
+        /* We process some stardard setup requests here */
         switch (setup->bRequest) {
-                /* Request that need Data+Status phase from udc */
         case USB_REQ_GET_STATUS:
-                if ((setup->bRequestType & (USB_DIR_IN | USB_TYPE_STANDARD))
+                /* Data+Status phase from udc */
+                if ((setup->bRequestType & (USB_DIR_IN | USB_TYPE_MASK))
                                         != (USB_DIR_IN | USB_TYPE_STANDARD))
                         break;
                 ch9getstatus(udc, setup->bRequestType, wValue, wIndex, wLength);
-                break;
+                return;
 
-                /* Requests that need Status phase from udc */
         case USB_REQ_SET_ADDRESS:
+                /* Status phase from udc */
                 if (setup->bRequestType != (USB_DIR_OUT | USB_TYPE_STANDARD
                                                 | USB_RECIP_DEVICE))
                         break;
                 ch9setaddress(udc, wValue, wIndex, wLength);
-                break;
+                return;
 
-                /* Handled by udc, no data, status by udc */
         case USB_REQ_CLEAR_FEATURE:
         case USB_REQ_SET_FEATURE:
-        {       /* status transaction */
+                /* Status phase from udc */
+        {
                 int rc = -EOPNOTSUPP;
 
-                if ((setup->bRequestType & USB_RECIP_MASK)
-                                == USB_RECIP_ENDPOINT) {
+                if ((setup->bRequestType & (USB_RECIP_MASK | USB_TYPE_MASK))
+                                == (USB_RECIP_ENDPOINT | USB_TYPE_STANDARD)) {
                         int pipe = get_pipe_by_windex(wIndex);
                         struct fsl_ep *ep;
 
@@ -1315,11 +1313,12 @@ static void setup_received_irq(struct fsl_udc *udc,
                                                 ? 1 : 0);
                         spin_lock(&udc->lock);
 
-                } else if ((setup->bRequestType & USB_RECIP_MASK)
-                                == USB_RECIP_DEVICE) {
+                } else if ((setup->bRequestType & (USB_RECIP_MASK
+                                | USB_TYPE_MASK)) == (USB_RECIP_DEVICE
+                                | USB_TYPE_STANDARD)) {
                         /* Note: The driver has not include OTG support yet.
                          * This will be set when OTG support is added */
-                        if (!udc->gadget.is_otg)
+                        if (!gadget_is_otg(udc->gadget))
                                 break;
                         else if (setup->bRequest == USB_DEVICE_B_HNP_ENABLE)
                                 udc->gadget.b_hnp_enable = 1;
@@ -1328,40 +1327,45 @@ static void setup_received_irq(struct fsl_udc *udc,
                         else if (setup->bRequest ==
                                         USB_DEVICE_A_ALT_HNP_SUPPORT)
                                 udc->gadget.a_alt_hnp_support = 1;
+                        else
+                                break;
                         rc = 0;
-                }
+                } else
+                        break;
+
                 if (rc == 0) {
                         if (ep0_prime_status(udc, EP_DIR_IN))
                                 ep0stall(udc);
                 }
-                break;
+                return;
         }
-                /* Requests handled by gadget */
-        default:
-                if (wLength) {
-                        /* Data phase from gadget, status phase from udc */
-                        udc->ep0_dir = (setup->bRequestType & USB_DIR_IN)
-                                        ?  USB_DIR_IN : USB_DIR_OUT;
-                        spin_unlock(&udc->lock);
-                        if (udc->driver->setup(&udc->gadget,
-                                        &udc->local_setup_buff) < 0)
-                                ep0stall(udc);
-                        spin_lock(&udc->lock);
-                        udc->ep0_state = (setup->bRequestType & USB_DIR_IN)
-                                        ?  DATA_STATE_XMIT : DATA_STATE_RECV;
 
-                } else {
-                        /* No data phase, IN status from gadget */
-                        udc->ep0_dir = USB_DIR_IN;
-                        spin_unlock(&udc->lock);
-                        if (udc->driver->setup(&udc->gadget,
-                                        &udc->local_setup_buff) < 0)
-                                ep0stall(udc);
-                        spin_lock(&udc->lock);
-                        udc->ep0_state = WAIT_FOR_OUT_STATUS;
-                }
+        default:
                 break;
         }
+
+        /* Requests handled by gadget */
+        if (wLength) {
+                /* Data phase from gadget, status phase from udc */
+                udc->ep0_dir = (setup->bRequestType & USB_DIR_IN)
+                                ?  USB_DIR_IN : USB_DIR_OUT;
+                spin_unlock(&udc->lock);
+                if (udc->driver->setup(&udc->gadget,
+                                &udc->local_setup_buff) < 0)
+                        ep0stall(udc);
+                spin_lock(&udc->lock);
+                udc->ep0_state = (setup->bRequestType & USB_DIR_IN)
+                                ?  DATA_STATE_XMIT : DATA_STATE_RECV;
+        } else {
+                /* No data phase, IN status from gadget */
+                udc->ep0_dir = USB_DIR_IN;
+                spin_unlock(&udc->lock);
+                if (udc->driver->setup(&udc->gadget,
+                                &udc->local_setup_buff) < 0)
+                        ep0stall(udc);
+                spin_lock(&udc->lock);
+                udc->ep0_state = WAIT_FOR_OUT_STATUS;
+        }
 }
 
 /* Process request for Data or Status phase of ep0
@@ -1835,10 +1839,8 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
         if (!driver || driver != udc_controller->driver || !driver->unbind)
                 return -EINVAL;
 
-#ifdef CONFIG_USB_OTG
         if (udc_controller->transceiver)
                 (void)otg_set_peripheral(udc_controller->transceiver, 0);
-#endif
 
         /* stop DR, disable intr */
         dr_controller_stop(udc_controller);
diff --git a/drivers/usb/gadget/gmidi.c b/drivers/usb/gadget/gmidi.c
index 1c5aa49d7432..0689189550bc 100644
--- a/drivers/usb/gadget/gmidi.c
+++ b/drivers/usb/gadget/gmidi.c
@@ -18,17 +18,11 @@
  * http://www.usb.org/developers/devclass_docs/midi10.pdf
  */
 
-#define DEBUG 1
-// #define VERBOSE
+/* #define VERBOSE_DEBUG */
 
-#include <linux/module.h>
 #include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/errno.h>
-#include <linux/init.h>
 #include <linux/utsname.h>
 #include <linux/device.h>
-#include <linux/moduleparam.h>
 
 #include <sound/driver.h>
 #include <sound/core.h>
@@ -36,7 +30,7 @@
 #include <sound/rawmidi.h>
 
 #include <linux/usb/ch9.h>
-#include <linux/usb_gadget.h>
+#include <linux/usb/gadget.h>
 #include <linux/usb/audio.h>
 #include <linux/usb/midi.h>
 
@@ -139,30 +133,16 @@ struct gmidi_device {
 static void gmidi_transmit(struct gmidi_device* dev, struct usb_request* req);
 
 
-#define xprintk(d,level,fmt,args...) \
-        dev_printk(level , &(d)->gadget->dev , fmt , ## args)
-
-#ifdef DEBUG
-#define DBG(dev,fmt,args...) \
-        xprintk(dev , KERN_DEBUG , fmt , ## args)
-#else
-#define DBG(dev,fmt,args...) \
-        do { } while (0)
-#endif /* DEBUG */
-
-#ifdef VERBOSE
-#define VDBG    DBG
-#else
-#define VDBG(dev,fmt,args...) \
-        do { } while (0)
-#endif /* VERBOSE */
-
-#define ERROR(dev,fmt,args...) \
-        xprintk(dev , KERN_ERR , fmt , ## args)
-#define WARN(dev,fmt,args...) \
-        xprintk(dev , KERN_WARNING , fmt , ## args)
-#define INFO(dev,fmt,args...) \
-        xprintk(dev , KERN_INFO , fmt , ## args)
+#define DBG(d, fmt, args...) \
+        dev_dbg(&(d)->gadget->dev , fmt , ## args)
+#define VDBG(d, fmt, args...) \
+        dev_vdbg(&(d)->gadget->dev , fmt , ## args)
+#define ERROR(d, fmt, args...) \
+        dev_err(&(d)->gadget->dev , fmt , ## args)
+#define WARN(d, fmt, args...) \
+        dev_warn(&(d)->gadget->dev , fmt , ## args)
+#define INFO(d, fmt, args...) \
+        dev_info(&(d)->gadget->dev , fmt , ## args)
 
 
 static unsigned buflen = 256;
@@ -425,7 +405,7 @@ static int config_buf(struct usb_gadget *gadget,
         return len;
 }
 
-static struct usb_request* alloc_ep_req(struct usb_ep *ep, unsigned length)
+static struct usb_request *alloc_ep_req(struct usb_ep *ep, unsigned length)
 {
         struct usb_request      *req;
 
@@ -455,7 +435,7 @@ static const uint8_t gmidi_cin_length[] = {
  * Receives a chunk of MIDI data.
  */
 static void gmidi_read_data(struct usb_ep *ep, int cable,
-                                   uint8_t* data, int length)
+                                   uint8_t *data, int length)
 {
         struct gmidi_device *dev = ep->driver_data;
         /* cable is ignored, because for now we only have one. */
@@ -541,7 +521,7 @@ static int set_gmidi_config(struct gmidi_device *dev, gfp_t gfp_flags)
 {
         int err = 0;
         struct usb_request *req;
-        struct usb_ep* ep;
+        struct usb_ep *ep;
         unsigned i;
 
         err = usb_ep_enable(dev->in_ep, &bulk_in_desc);
@@ -628,7 +608,7 @@ gmidi_set_config(struct gmidi_device *dev, unsigned number, gfp_t gfp_flags)
 
         if (gadget_is_sa1100(gadget) && dev->config) {
                 /* tx fifo is full, but we can't clear it...*/
-                INFO(dev, "can't change configurations\n");
+                ERROR(dev, "can't change configurations\n");
                 return -ESPIPE;
         }
         gmidi_reset_config(dev);
@@ -843,7 +823,7 @@ static void gmidi_disconnect(struct usb_gadget *gadget)
 static void /* __init_or_exit */ gmidi_unbind(struct usb_gadget *gadget)
 {
         struct gmidi_device *dev = get_gadget_data(gadget);
-        struct snd_card* card;
+        struct snd_card *card;
 
         DBG(dev, "unbind\n");
 
@@ -867,12 +847,12 @@ static int gmidi_snd_free(struct snd_device *device)
         return 0;
 }
 
-static void gmidi_transmit_packet(struct usb_request* req, uint8_t p0,
+static void gmidi_transmit_packet(struct usb_request *req, uint8_t p0,
                                         uint8_t p1, uint8_t p2, uint8_t p3)
 {
         unsigned length = req->length;
+        u8 *buf = (u8 *)req->buf + length;
 
-        uint8_t* buf = (uint8_t*)req->buf + length;
         buf[0] = p0;
         buf[1] = p1;
         buf[2] = p2;
@@ -883,8 +863,8 @@ static void gmidi_transmit_packet(struct usb_request* req, uint8_t p0,
 /*
  * Converts MIDI commands to USB MIDI packets.
  */
-static void gmidi_transmit_byte(struct usb_request* req,
-                                struct gmidi_in_port* port, uint8_t b)
+static void gmidi_transmit_byte(struct usb_request *req,
+                                struct gmidi_in_port *port, uint8_t b)
 {
         uint8_t p0 = port->cable;
 
@@ -981,10 +961,10 @@ static void gmidi_transmit_byte(struct usb_request* req,
         }
 }
 
-static void gmidi_transmit(struct gmidi_device* dev, struct usb_request* req)
+static void gmidi_transmit(struct gmidi_device *dev, struct usb_request *req)
 {
-        struct usb_ep* ep = dev->in_ep;
-        struct gmidi_in_port* port = &dev->in_port;
+        struct usb_ep *ep = dev->in_ep;
+        struct gmidi_in_port *port = &dev->in_port;
 
         if (!ep) {
                 return;
@@ -1020,14 +1000,14 @@ static void gmidi_transmit(struct gmidi_device* dev, struct usb_request* req)
 
 static void gmidi_in_tasklet(unsigned long data)
 {
-        struct gmidi_device* dev = (struct gmidi_device*)data;
+        struct gmidi_device *dev = (struct gmidi_device *)data;
 
         gmidi_transmit(dev, NULL);
 }
 
 static int gmidi_in_open(struct snd_rawmidi_substream *substream)
 {
-        struct gmidi_device* dev = substream->rmidi->private_data;
+        struct gmidi_device *dev = substream->rmidi->private_data;
 
         VDBG(dev, "gmidi_in_open\n");
         dev->in_substream = substream;
@@ -1037,13 +1017,15 @@ static int gmidi_in_open(struct snd_rawmidi_substream *substream)
 
 static int gmidi_in_close(struct snd_rawmidi_substream *substream)
 {
+        struct gmidi_device *dev = substream->rmidi->private_data;
+
         VDBG(dev, "gmidi_in_close\n");
         return 0;
 }
 
 static void gmidi_in_trigger(struct snd_rawmidi_substream *substream, int up)
 {
-        struct gmidi_device* dev = substream->rmidi->private_data;
+        struct gmidi_device *dev = substream->rmidi->private_data;
 
         VDBG(dev, "gmidi_in_trigger %d\n", up);
         dev->in_port.active = up;
@@ -1054,7 +1036,7 @@ static void gmidi_in_trigger(struct snd_rawmidi_substream *substream, int up)
 
 static int gmidi_out_open(struct snd_rawmidi_substream *substream)
 {
-        struct gmidi_device* dev = substream->rmidi->private_data;
+        struct gmidi_device *dev = substream->rmidi->private_data;
 
         VDBG(dev, "gmidi_out_open\n");
         dev->out_substream = substream;
@@ -1063,13 +1045,15 @@ static int gmidi_out_open(struct snd_rawmidi_substream *substream)
 
 static int gmidi_out_close(struct snd_rawmidi_substream *substream)
 {
+        struct gmidi_device *dev = substream->rmidi->private_data;
+
         VDBG(dev, "gmidi_out_close\n");
         return 0;
 }
 
 static void gmidi_out_trigger(struct snd_rawmidi_substream *substream, int up)
 {
-        struct gmidi_device* dev = substream->rmidi->private_data;
+        struct gmidi_device *dev = substream->rmidi->private_data;
 
         VDBG(dev, "gmidi_out_trigger %d\n", up);
         if (up) {
diff --git a/drivers/usb/gadget/goku_udc.c b/drivers/usb/gadget/goku_udc.c
index 349b8166f34a..2ec9d196a8cf 100644
--- a/drivers/usb/gadget/goku_udc.c
+++ b/drivers/usb/gadget/goku_udc.c
@@ -37,7 +37,7 @@
 #include <linux/proc_fs.h>
 #include <linux/device.h>
 #include <linux/usb/ch9.h>
-#include <linux/usb_gadget.h>
+#include <linux/usb/gadget.h>
 
 #include <asm/byteorder.h>
 #include <asm/io.h>
diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c
index 173004f60fea..47ef8bd58a00 100644
--- a/drivers/usb/gadget/inode.c
+++ b/drivers/usb/gadget/inode.c
@@ -20,8 +20,7 @@
  */
 
 
-// #define      DEBUG                   /* data to help fault diagnosis */
-// #define      VERBOSE         /* extra debug messages (success too) */
+/* #define VERBOSE_DEBUG */
 
 #include <linux/init.h>
 #include <linux/module.h>
@@ -38,7 +37,7 @@
 #include <linux/moduleparam.h>
 
 #include <linux/usb/gadgetfs.h>
-#include <linux/usb_gadget.h>
+#include <linux/usb/gadget.h>
 
 
 /*
@@ -253,7 +252,7 @@ static const char *CHIP;
         do { } while (0)
 #endif /* DEBUG */
 
-#ifdef VERBOSE
+#ifdef VERBOSE_DEBUG
 #define VDEBUG  DBG
 #else
 #define VDEBUG(dev,fmt,args...) \
@@ -1010,11 +1009,12 @@ ep0_read (struct file *fd, char __user *buf, size_t len, loff_t *ptr)
                         /* assume that was SET_CONFIGURATION */
                         if (dev->current_config) {
                                 unsigned power;
-#ifdef  CONFIG_USB_GADGET_DUALSPEED
-                                if (dev->gadget->speed == USB_SPEED_HIGH)
+
+                                if (gadget_is_dualspeed(dev->gadget)
+                                                && (dev->gadget->speed
+                                                        == USB_SPEED_HIGH))
                                         power = dev->hs_config->bMaxPower;
                                 else
-#endif
                                         power = dev->config->bMaxPower;
                                 usb_gadget_vbus_draw(dev->gadget, 2 * power);
                         }
@@ -1355,24 +1355,21 @@ static int
 config_buf (struct dev_data *dev, u8 type, unsigned index)
 {
         int             len;
-#ifdef CONFIG_USB_GADGET_DUALSPEED
-        int             hs;
-#endif
+        int             hs = 0;
 
         /* only one configuration */
         if (index > 0)
                 return -EINVAL;
 
-#ifdef CONFIG_USB_GADGET_DUALSPEED
-        hs = (dev->gadget->speed == USB_SPEED_HIGH);
-        if (type == USB_DT_OTHER_SPEED_CONFIG)
-                hs = !hs;
+        if (gadget_is_dualspeed(dev->gadget)) {
+                hs = (dev->gadget->speed == USB_SPEED_HIGH);
+                if (type == USB_DT_OTHER_SPEED_CONFIG)
+                        hs = !hs;
+        }
         if (hs) {
                 dev->req->buf = dev->hs_config;
                 len = le16_to_cpu(dev->hs_config->wTotalLength);
-        } else
-#endif
-        {
+        } else {
                 dev->req->buf = dev->config;
                 len = le16_to_cpu(dev->config->wTotalLength);
         }
@@ -1393,13 +1390,13 @@ gadgetfs_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
         spin_lock (&dev->lock);
         dev->setup_abort = 0;
         if (dev->state == STATE_DEV_UNCONNECTED) {
-#ifdef  CONFIG_USB_GADGET_DUALSPEED
-                if (gadget->speed == USB_SPEED_HIGH && dev->hs_config == NULL) {
+                if (gadget_is_dualspeed(gadget)
+                                && gadget->speed == USB_SPEED_HIGH
+                                && dev->hs_config == NULL) {
                         spin_unlock(&dev->lock);
                         ERROR (dev, "no high speed config??\n");
                         return -EINVAL;
                 }
-#endif  /* CONFIG_USB_GADGET_DUALSPEED */
 
                 dev->state = STATE_DEV_CONNECTED;
                 dev->dev->bMaxPacketSize0 = gadget->ep0->maxpacket;
@@ -1469,13 +1466,12 @@ gadgetfs_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
                         // user mode expected to disable endpoints
                 } else {
                         u8      config, power;
-#ifdef  CONFIG_USB_GADGET_DUALSPEED
-                        if (gadget->speed == USB_SPEED_HIGH) {
+
+                        if (gadget_is_dualspeed(gadget)
+                                        && gadget->speed == USB_SPEED_HIGH) {
                                 config = dev->hs_config->bConfigurationValue;
                                 power = dev->hs_config->bMaxPower;
-                        } else
-#endif
-                        {
+                        } else {
                                 config = dev->config->bConfigurationValue;
                                 power = dev->config->bMaxPower;
                         }
diff --git a/drivers/usb/gadget/lh7a40x_udc.h b/drivers/usb/gadget/lh7a40x_udc.h
index b3fe197e1eeb..1ecfd6366b9a 100644
--- a/drivers/usb/gadget/lh7a40x_udc.h
+++ b/drivers/usb/gadget/lh7a40x_udc.h
@@ -50,7 +50,7 @@
 #include <asm/hardware.h>
 
 #include <linux/usb/ch9.h>
-#include <linux/usb_gadget.h>
+#include <linux/usb/gadget.h>
 
 /*
  * Memory map
diff --git a/drivers/usb/gadget/m66592-udc.c b/drivers/usb/gadget/m66592-udc.c
index 4b27d12f049d..ebc5536aa271 100644
--- a/drivers/usb/gadget/m66592-udc.c
+++ b/drivers/usb/gadget/m66592-udc.c
@@ -27,7 +27,7 @@
 #include <linux/platform_device.h>
 
 #include <linux/usb/ch9.h>
-#include <linux/usb_gadget.h>
+#include <linux/usb/gadget.h>
 
 #include "m66592-udc.h"
 
diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c
index c3d364ecd4f8..d5d473f8144b 100644
--- a/drivers/usb/gadget/net2280.c
+++ b/drivers/usb/gadget/net2280.c
@@ -62,7 +62,7 @@
 #include <linux/moduleparam.h>
 #include <linux/device.h>
 #include <linux/usb/ch9.h>
-#include <linux/usb_gadget.h>
+#include <linux/usb/gadget.h>
 
 #include <asm/byteorder.h>
 #include <asm/io.h>
diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c
index 9b0f0925dddf..87c4f50dfb61 100644
--- a/drivers/usb/gadget/omap_udc.c
+++ b/drivers/usb/gadget/omap_udc.c
@@ -38,7 +38,7 @@
 #include <linux/moduleparam.h>
 #include <linux/platform_device.h>
 #include <linux/usb/ch9.h>
-#include <linux/usb_gadget.h>
+#include <linux/usb/gadget.h>
 #include <linux/usb/otg.h>
 #include <linux/dma-mapping.h>
 #include <linux/clk.h>
@@ -1241,19 +1241,15 @@ static void pullup_enable(struct omap_udc *udc)
         udc->gadget.dev.parent->power.power_state = PMSG_ON;
         udc->gadget.dev.power.power_state = PMSG_ON;
         UDC_SYSCON1_REG |= UDC_PULLUP_EN;
-#ifndef CONFIG_USB_OTG
-        if (!cpu_is_omap15xx())
+        if (!gadget_is_otg(udc->gadget) && !cpu_is_omap15xx())
                 OTG_CTRL_REG |= OTG_BSESSVLD;
-#endif
         UDC_IRQ_EN_REG = UDC_DS_CHG_IE;
 }
 
 static void pullup_disable(struct omap_udc *udc)
 {
-#ifndef CONFIG_USB_OTG
-        if (!cpu_is_omap15xx())
+        if (!gadget_is_otg(udc->gadget) && !cpu_is_omap15xx())
                 OTG_CTRL_REG &= ~OTG_BSESSVLD;
-#endif
         UDC_IRQ_EN_REG = UDC_DS_CHG_IE;
         UDC_SYSCON1_REG &= ~UDC_PULLUP_EN;
 }
@@ -1390,7 +1386,7 @@ static void update_otg(struct omap_udc *udc)
 {
         u16     devstat;
 
-        if (!udc->gadget.is_otg)
+        if (!gadget_is_otg(udc->gadget))
                 return;
 
         if (OTG_CTRL_REG & OTG_ID)
diff --git a/drivers/usb/gadget/pxa2xx_udc.c b/drivers/usb/gadget/pxa2xx_udc.c
index 72b4ebbf132d..3e715082de36 100644
--- a/drivers/usb/gadget/pxa2xx_udc.c
+++ b/drivers/usb/gadget/pxa2xx_udc.c
@@ -54,7 +54,7 @@
 #include <asm/hardware.h>
 
 #include <linux/usb/ch9.h>
-#include <linux/usb_gadget.h>
+#include <linux/usb/gadget.h>
 
 #include <asm/mach/udc_pxa2xx.h>
 
@@ -967,7 +967,7 @@ static int pxa2xx_udc_pullup(struct usb_gadget *_gadget, int is_active)
         udc = container_of(_gadget, struct pxa2xx_udc, gadget);
 
         /* not all boards support pullup control */
-        if (!udc->mach->udc_command)
+        if (!udc->mach->gpio_pullup && !udc->mach->udc_command)
                 return -EOPNOTSUPP;
 
         is_active = (is_active != 0);
@@ -2309,7 +2309,7 @@ static int pxa2xx_udc_suspend(struct platform_device *dev, pm_message_t state)
 {
         struct pxa2xx_udc       *udc = platform_get_drvdata(dev);
 
-        if (!udc->mach->udc_command)
+        if (!udc->mach->gpio_pullup && !udc->mach->udc_command)
                 WARN("USB host won't detect disconnect!\n");
         pullup(udc, 0);
 
diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c
index 0be80c635c48..e3e90f8a75e7 100644
--- a/drivers/usb/gadget/s3c2410_udc.c
+++ b/drivers/usb/gadget/s3c2410_udc.c
@@ -42,7 +42,7 @@
 #include <linux/seq_file.h>
 
 #include <linux/usb.h>
-#include <linux/usb_gadget.h>
+#include <linux/usb/gadget.h>
 
 #include <asm/byteorder.h>
 #include <asm/io.h>
diff --git a/drivers/usb/gadget/serial.c b/drivers/usb/gadget/serial.c
index 9cd98e73dc1d..f5738eb8e765 100644
--- a/drivers/usb/gadget/serial.c
+++ b/drivers/usb/gadget/serial.c
@@ -17,34 +17,15 @@
  *
  */
 
-#include <linux/module.h>
 #include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/ioport.h>
-#include <linux/slab.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/timer.h>
-#include <linux/list.h>
-#include <linux/interrupt.h>
 #include <linux/utsname.h>
-#include <linux/wait.h>
-#include <linux/proc_fs.h>
 #include <linux/device.h>
 #include <linux/tty.h>
 #include <linux/tty_flip.h>
-#include <linux/mutex.h>
-
-#include <asm/byteorder.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/system.h>
-#include <asm/unaligned.h>
-#include <asm/uaccess.h>
 
 #include <linux/usb/ch9.h>
 #include <linux/usb/cdc.h>
-#include <linux/usb_gadget.h>
+#include <linux/usb/gadget.h>
 
 #include "gadget_chips.h"
 
@@ -89,30 +70,29 @@
 #define GS_DEFAULT_PARITY               USB_CDC_NO_PARITY
 #define GS_DEFAULT_CHAR_FORMAT          USB_CDC_1_STOP_BITS
 
-/* select highspeed/fullspeed, hiding highspeed if not configured */
-#ifdef CONFIG_USB_GADGET_DUALSPEED
-#define GS_SPEED_SELECT(is_hs,hs,fs) ((is_hs) ? (hs) : (fs))
-#else
-#define GS_SPEED_SELECT(is_hs,hs,fs) (fs)
-#endif /* CONFIG_USB_GADGET_DUALSPEED */
+/* maxpacket and other transfer characteristics vary by speed. */
+static inline struct usb_endpoint_descriptor *
+choose_ep_desc(struct usb_gadget *g, struct usb_endpoint_descriptor *hs,
+                struct usb_endpoint_descriptor *fs)
+{
+        if (gadget_is_dualspeed(g) && g->speed == USB_SPEED_HIGH)
+                return hs;
+        return fs;
+}
+
 
 /* debug settings */
-#ifdef GS_DEBUG
+#ifdef DEBUG
 static int debug = 1;
+#else
+#define debug 0
+#endif
 
 #define gs_debug(format, arg...) \
         do { if (debug) printk(KERN_DEBUG format, ## arg); } while(0)
 #define gs_debug_level(level, format, arg...) \
         do { if (debug>=level) printk(KERN_DEBUG format, ## arg); } while(0)
 
-#else
-
-#define gs_debug(format, arg...) \
-        do { } while(0)
-#define gs_debug_level(level, format, arg...) \
-        do { } while(0)
-
-#endif /* GS_DEBUG */
 
 /* Thanks to NetChip Technologies for donating this product ID.
  *
@@ -147,10 +127,10 @@ struct gs_req_entry {
 
 /* the port structure holds info for each port, one for each minor number */
 struct gs_port {
-        struct gs_dev           *port_dev;      /* pointer to device struct */
+        struct gs_dev           *port_dev;      /* pointer to device struct */
         struct tty_struct       *port_tty;      /* pointer to tty struct */
         spinlock_t              port_lock;
-        int                     port_num;
+        int                     port_num;
         int                     port_open_count;
         int                     port_in_use;    /* open/close in progress */
         wait_queue_head_t       port_write_wait;/* waiting to write */
@@ -188,7 +168,7 @@ static void __exit gs_module_exit(void);
 /* tty driver */
 static int gs_open(struct tty_struct *tty, struct file *file);
 static void gs_close(struct tty_struct *tty, struct file *file);
-static int gs_write(struct tty_struct *tty, 
+static int gs_write(struct tty_struct *tty,
         const unsigned char *buf, int count);
 static void gs_put_char(struct tty_struct *tty, unsigned char ch);
 static void gs_flush_chars(struct tty_struct *tty);
@@ -222,7 +202,7 @@ static void gs_setup_complete(struct usb_ep *ep, struct usb_request *req);
 static void gs_disconnect(struct usb_gadget *gadget);
 static int gs_set_config(struct gs_dev *dev, unsigned config);
 static void gs_reset_config(struct gs_dev *dev);
-static int gs_build_config_buf(u8 *buf, enum usb_device_speed speed,
+static int gs_build_config_buf(u8 *buf, struct usb_gadget *g,
                 u8 type, unsigned int index, int is_otg);
 
 static struct usb_request *gs_alloc_req(struct usb_ep *ep, unsigned int len,
@@ -415,18 +395,18 @@ static const struct usb_cdc_header_desc gs_header_desc = {
 };
 
 static const struct usb_cdc_call_mgmt_descriptor gs_call_mgmt_descriptor = {
-        .bLength =              sizeof(gs_call_mgmt_descriptor),
-        .bDescriptorType =      USB_DT_CS_INTERFACE,
-        .bDescriptorSubType =   USB_CDC_CALL_MANAGEMENT_TYPE,
-        .bmCapabilities =       0,
-        .bDataInterface =       1,      /* index of data interface */
+        .bLength =              sizeof(gs_call_mgmt_descriptor),
+        .bDescriptorType =      USB_DT_CS_INTERFACE,
+        .bDescriptorSubType =   USB_CDC_CALL_MANAGEMENT_TYPE,
+        .bmCapabilities =       0,
+        .bDataInterface =       1,      /* index of data interface */
 };
 
 static struct usb_cdc_acm_descriptor gs_acm_descriptor = {
-        .bLength =              sizeof(gs_acm_descriptor),
-        .bDescriptorType =      USB_DT_CS_INTERFACE,
-        .bDescriptorSubType =   USB_CDC_ACM_TYPE,
-        .bmCapabilities =       0,
+        .bLength =              sizeof(gs_acm_descriptor),
+        .bDescriptorType =      USB_DT_CS_INTERFACE,
+        .bDescriptorSubType =   USB_CDC_ACM_TYPE,
+        .bmCapabilities =       0,
 };
 
 static const struct usb_cdc_union_desc gs_union_desc = {
@@ -436,7 +416,7 @@ static const struct usb_cdc_union_desc gs_union_desc = {
         .bMasterInterface0 =    0,      /* index of control interface */
         .bSlaveInterface0 =     1,      /* index of data interface */
 };
- 
+
 static struct usb_endpoint_descriptor gs_fullspeed_notify_desc = {
         .bLength =              USB_DT_ENDPOINT_SIZE,
         .bDescriptorType =      USB_DT_ENDPOINT,
@@ -482,7 +462,6 @@ static const struct usb_descriptor_header *gs_acm_fullspeed_function[] = {
         NULL,
 };
 
-#ifdef CONFIG_USB_GADGET_DUALSPEED
 static struct usb_endpoint_descriptor gs_highspeed_notify_desc = {
         .bLength =              USB_DT_ENDPOINT_SIZE,
         .bDescriptorType =      USB_DT_ENDPOINT,
@@ -536,15 +515,13 @@ static const struct usb_descriptor_header *gs_acm_highspeed_function[] = {
         NULL,
 };
 
-#endif /* CONFIG_USB_GADGET_DUALSPEED */
-
 
 /* Module */
 MODULE_DESCRIPTION(GS_LONG_NAME);
 MODULE_AUTHOR("Al Borchers");
 MODULE_LICENSE("GPL");
 
-#ifdef GS_DEBUG
+#ifdef DEBUG
 module_param(debug, int, S_IRUGO|S_IWUSR);
 MODULE_PARM_DESC(debug, "Enable debugging, 0=off, 1=on");
 #endif
@@ -915,7 +892,8 @@ static void gs_put_char(struct tty_struct *tty, unsigned char ch)
                 return;
         }
 
-        gs_debug("gs_put_char: (%d,%p) char=0x%x, called from %p, %p, %p\n", port->port_num, tty, ch, __builtin_return_address(0), __builtin_return_address(1), __builtin_return_address(2));
+        gs_debug("gs_put_char: (%d,%p) char=0x%x, called from %p\n",
+                port->port_num, tty, ch, __builtin_return_address(0));
 
         spin_lock_irqsave(&port->port_lock, flags);
 
@@ -1116,7 +1094,11 @@ static int gs_send(struct gs_dev *dev)
                 len = gs_send_packet(dev, req->buf, ep->maxpacket);
 
                 if (len > 0) {
-gs_debug_level(3, "gs_send: len=%d, 0x%2.2x 0x%2.2x 0x%2.2x ...\n", len, *((unsigned char *)req->buf), *((unsigned char *)req->buf+1), *((unsigned char *)req->buf+2));
+                        gs_debug_level(3, "gs_send: len=%d, 0x%2.2x "
+                                        "0x%2.2x 0x%2.2x ...\n", len,
+                                        *((unsigned char *)req->buf),
+                                        *((unsigned char *)req->buf+1),
+                                        *((unsigned char *)req->buf+2));
                         list_del(&req_entry->re_entry);
                         req->length = len;
                         spin_unlock_irqrestore(&dev->dev_lock, flags);
@@ -1269,7 +1251,7 @@ static void gs_read_complete(struct usb_ep *ep, struct usb_request *req)
 
         switch(req->status) {
         case 0:
-                /* normal completion */
+                /* normal completion */
                 gs_recv_packet(dev, req->buf, req->actual);
 requeue:
                 req->length = ep->maxpacket;
@@ -1406,23 +1388,24 @@ static int __init gs_bind(struct usb_gadget *gadget)
                 ? USB_CLASS_COMM : USB_CLASS_VENDOR_SPEC;
         gs_device_desc.bMaxPacketSize0 = gadget->ep0->maxpacket;
 
-#ifdef CONFIG_USB_GADGET_DUALSPEED
-        gs_qualifier_desc.bDeviceClass = use_acm
-                ? USB_CLASS_COMM : USB_CLASS_VENDOR_SPEC;
-        /* assume ep0 uses the same packet size for both speeds */
-        gs_qualifier_desc.bMaxPacketSize0 = gs_device_desc.bMaxPacketSize0;
-        /* assume endpoints are dual-speed */
-        gs_highspeed_notify_desc.bEndpointAddress =
-                gs_fullspeed_notify_desc.bEndpointAddress;
-        gs_highspeed_in_desc.bEndpointAddress =
-                gs_fullspeed_in_desc.bEndpointAddress;
-        gs_highspeed_out_desc.bEndpointAddress =
-                gs_fullspeed_out_desc.bEndpointAddress;
-#endif /* CONFIG_USB_GADGET_DUALSPEED */
+        if (gadget_is_dualspeed(gadget)) {
+                gs_qualifier_desc.bDeviceClass = use_acm
+                        ? USB_CLASS_COMM : USB_CLASS_VENDOR_SPEC;
+                /* assume ep0 uses the same packet size for both speeds */
+                gs_qualifier_desc.bMaxPacketSize0 =
+                        gs_device_desc.bMaxPacketSize0;
+                /* assume endpoints are dual-speed */
+                gs_highspeed_notify_desc.bEndpointAddress =
+                        gs_fullspeed_notify_desc.bEndpointAddress;
+                gs_highspeed_in_desc.bEndpointAddress =
+                        gs_fullspeed_in_desc.bEndpointAddress;
+                gs_highspeed_out_desc.bEndpointAddress =
+                        gs_fullspeed_out_desc.bEndpointAddress;
+        }
 
         usb_gadget_set_selfpowered(gadget);
 
-        if (gadget->is_otg) {
+        if (gadget_is_otg(gadget)) {
                 gs_otg_descriptor.bmAttributes |= USB_OTG_HNP,
                 gs_bulk_config_desc.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
                 gs_acm_config_desc.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
@@ -1487,6 +1470,12 @@ static void /* __init_or_exit */ gs_unbind(struct usb_gadget *gadget)
                         dev->dev_ctrl_req = NULL;
                 }
                 gs_free_ports(dev);
+                if (dev->dev_notify_ep)
+                        usb_ep_disable(dev->dev_notify_ep);
+                if (dev->dev_in_ep)
+                        usb_ep_disable(dev->dev_in_ep);
+                if (dev->dev_out_ep)
+                        usb_ep_disable(dev->dev_out_ep);
                 kfree(dev);
                 set_gadget_data(gadget, NULL);
         }
@@ -1570,9 +1559,8 @@ static int gs_setup_standard(struct usb_gadget *gadget,
                         memcpy(req->buf, &gs_device_desc, ret);
                         break;
 
-#ifdef CONFIG_USB_GADGET_DUALSPEED
                 case USB_DT_DEVICE_QUALIFIER:
-                        if (!gadget->is_dualspeed)
+                        if (!gadget_is_dualspeed(gadget))
                                 break;
                         ret = min(wLength,
                                 (u16)sizeof(struct usb_qualifier_descriptor));
@@ -1580,14 +1568,13 @@ static int gs_setup_standard(struct usb_gadget *gadget,
                         break;
 
                 case USB_DT_OTHER_SPEED_CONFIG:
-                        if (!gadget->is_dualspeed)
+                        if (!gadget_is_dualspeed(gadget))
                                 break;
                         /* fall through */
-#endif /* CONFIG_USB_GADGET_DUALSPEED */
                 case USB_DT_CONFIG:
-                        ret = gs_build_config_buf(req->buf, gadget->speed,
+                        ret = gs_build_config_buf(req->buf, gadget,
                                 wValue >> 8, wValue & 0xff,
-                                gadget->is_otg);
+                                gadget_is_otg(gadget));
                         if (ret >= 0)
                                 ret = min(wLength, (u16)ret);
                         break;
@@ -1691,14 +1678,12 @@ static int gs_setup_class(struct usb_gadget *gadget,
 
         switch (ctrl->bRequest) {
         case USB_CDC_REQ_SET_LINE_CODING:
-                ret = min(wLength,
-                        (u16)sizeof(struct usb_cdc_line_coding));
-                if (port) {
-                        spin_lock(&port->port_lock);
-                        memcpy(&port->port_line_coding, req->buf, ret);
-                        spin_unlock(&port->port_lock);
-                }
-                ret = 0;
+                /* FIXME Submit req to read the data; have its completion
+                 * handler copy that data to port->port_line_coding (iff
+                 * it's valid) and maybe pass it on.  Until then, fail.
+                 */
+                printk(KERN_WARNING "gs_setup: set_line_coding "
+                                "unuspported\n");
                 break;
 
         case USB_CDC_REQ_GET_LINE_CODING:
@@ -1713,11 +1698,18 @@ static int gs_setup_class(struct usb_gadget *gadget,
                 break;
 
         case USB_CDC_REQ_SET_CONTROL_LINE_STATE:
-                ret = 0;
+                /* FIXME Submit req to read the data; have its completion
+                 * handler use that to set the state (iff it's valid) and
+                 * maybe pass it on.  Until then, fail.
+                 */
+                printk(KERN_WARNING "gs_setup: set_control_line_state "
+                                "unuspported\n");
                 break;
 
         default:
-                printk(KERN_ERR "gs_setup: unknown class request, type=%02x, request=%02x, value=%04x, index=%04x, length=%d\n",
+                printk(KERN_ERR "gs_setup: unknown class request, "
+                                "type=%02x, request=%02x, value=%04x, "
+                                "index=%04x, length=%d\n",
                         ctrl->bRequestType, ctrl->bRequest,
                         wValue, wIndex, wLength);
                 break;
@@ -1822,8 +1814,7 @@ static int gs_set_config(struct gs_dev *dev, unsigned config)
 
                 if (EP_NOTIFY_NAME
                 && strcmp(ep->name, EP_NOTIFY_NAME) == 0) {
-                        ep_desc = GS_SPEED_SELECT(
-                                gadget->speed == USB_SPEED_HIGH,
+                        ep_desc = choose_ep_desc(gadget,
                                 &gs_highspeed_notify_desc,
                                 &gs_fullspeed_notify_desc);
                         ret = usb_ep_enable(ep,ep_desc);
@@ -1839,9 +1830,8 @@ static int gs_set_config(struct gs_dev *dev, unsigned config)
                 }
 
                 else if (strcmp(ep->name, EP_IN_NAME) == 0) {
-                        ep_desc = GS_SPEED_SELECT(
-                                gadget->speed == USB_SPEED_HIGH,
-                                &gs_highspeed_in_desc,
+                        ep_desc = choose_ep_desc(gadget,
+                                &gs_highspeed_in_desc,
                                 &gs_fullspeed_in_desc);
                         ret = usb_ep_enable(ep,ep_desc);
                         if (ret == 0) {
@@ -1856,8 +1846,7 @@ static int gs_set_config(struct gs_dev *dev, unsigned config)
                 }
 
                 else if (strcmp(ep->name, EP_OUT_NAME) == 0) {
-                        ep_desc = GS_SPEED_SELECT(
-                                gadget->speed == USB_SPEED_HIGH,
+                        ep_desc = choose_ep_desc(gadget,
                                 &gs_highspeed_out_desc,
                                 &gs_fullspeed_out_desc);
                         ret = usb_ep_enable(ep,ep_desc);
@@ -1976,11 +1965,11 @@ static void gs_reset_config(struct gs_dev *dev)
  * Builds the config descriptors in the given buffer and returns the
  * length, or a negative error number.
  */
-static int gs_build_config_buf(u8 *buf, enum usb_device_speed speed,
+static int gs_build_config_buf(u8 *buf, struct usb_gadget *g,
         u8 type, unsigned int index, int is_otg)
 {
         int len;
-        int high_speed;
+        int high_speed = 0;
         const struct usb_config_descriptor *config_desc;
         const struct usb_descriptor_header **function;
 
@@ -1988,20 +1977,22 @@ static int gs_build_config_buf(u8 *buf, enum usb_device_speed speed,
                 return -EINVAL;
 
         /* other speed switches high and full speed */
-        high_speed = (speed == USB_SPEED_HIGH);
-        if (type == USB_DT_OTHER_SPEED_CONFIG)
-                high_speed = !high_speed;
+        if (gadget_is_dualspeed(g)) {
+                high_speed = (g->speed == USB_SPEED_HIGH);
+                if (type == USB_DT_OTHER_SPEED_CONFIG)
+                        high_speed = !high_speed;
+        }
 
         if (use_acm) {
                 config_desc = &gs_acm_config_desc;
-                function = GS_SPEED_SELECT(high_speed,
-                        gs_acm_highspeed_function,
-                        gs_acm_fullspeed_function);
+                function = high_speed
+                        ? gs_acm_highspeed_function
+                        : gs_acm_fullspeed_function;
         } else {
                 config_desc = &gs_bulk_config_desc;
-                function = GS_SPEED_SELECT(high_speed,
-                        gs_bulk_highspeed_function,
-                        gs_bulk_fullspeed_function);
+                function = high_speed
+                        ? gs_bulk_highspeed_function
+                        : gs_bulk_fullspeed_function;
         }
 
         /* for now, don't advertise srp-only devices */
diff --git a/drivers/usb/gadget/usbstring.c b/drivers/usb/gadget/usbstring.c
index 3459ea6c6c0b..878e428a0ec1 100644
--- a/drivers/usb/gadget/usbstring.c
+++ b/drivers/usb/gadget/usbstring.c
@@ -15,7 +15,7 @@
 #include <linux/init.h>
 
 #include <linux/usb/ch9.h>
-#include <linux/usb_gadget.h>
+#include <linux/usb/gadget.h>
 
 #include <asm/unaligned.h>
 
diff --git a/drivers/usb/gadget/zero.c b/drivers/usb/gadget/zero.c
index fcfe869acb94..fcde5d9c87df 100644
--- a/drivers/usb/gadget/zero.c
+++ b/drivers/usb/gadget/zero.c
@@ -1,38 +1,22 @@
 /*
  * zero.c -- Gadget Zero, for USB development
  *
- * Copyright (C) 2003-2004 David Brownell
+ * Copyright (C) 2003-2007 David Brownell
  * All rights reserved.
  *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions, and the following disclaimer,
- *    without modification.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. The names of the above-listed copyright holders may not be used
- *    to endorse or promote products derived from this software without
- *    specific prior written permission.
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
  *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
  *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
- * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
- * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
- * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
- * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
- * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
- * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
- * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
- * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 
@@ -57,40 +41,28 @@
  * Many drivers will only have one configuration, letting them be much
  * simpler if they also don't support high speed operation (like this
  * driver does).
+ *
+ * Why is *this* driver using two configurations, rather than setting up
+ * two interfaces with different functions?  To help verify that multiple
+ * configuration infrastucture is working correctly; also, so that it can
+ * work with low capability USB controllers without four bulk endpoints.
  */
 
-#define DEBUG 1
-// #define VERBOSE
+/* #define VERBOSE_DEBUG */
 
-#include <linux/module.h>
 #include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/ioport.h>
-#include <linux/slab.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/timer.h>
-#include <linux/list.h>
-#include <linux/interrupt.h>
 #include <linux/utsname.h>
 #include <linux/device.h>
-#include <linux/moduleparam.h>
-
-#include <asm/byteorder.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/system.h>
-#include <asm/unaligned.h>
 
 #include <linux/usb/ch9.h>
-#include <linux/usb_gadget.h>
+#include <linux/usb/gadget.h>
 
 #include "gadget_chips.h"
 
 
 /*-------------------------------------------------------------------------*/
 
-#define DRIVER_VERSION          "St Patrick's Day 2004"
+#define DRIVER_VERSION          "Lughnasadh, 2007"
 
 static const char shortname [] = "zero";
 static const char longname [] = "Gadget Zero";
@@ -131,30 +103,16 @@ struct zero_dev {
         struct timer_list       resume;
 };
 
-#define xprintk(d,level,fmt,args...) \
-        dev_printk(level , &(d)->gadget->dev , fmt , ## args)
-
-#ifdef DEBUG
-#define DBG(dev,fmt,args...) \
-        xprintk(dev , KERN_DEBUG , fmt , ## args)
-#else
-#define DBG(dev,fmt,args...) \
-        do { } while (0)
-#endif /* DEBUG */
-
-#ifdef VERBOSE
-#define VDBG    DBG
-#else
-#define VDBG(dev,fmt,args...) \
-        do { } while (0)
-#endif /* VERBOSE */
-
-#define ERROR(dev,fmt,args...) \
-        xprintk(dev , KERN_ERR , fmt , ## args)
-#define WARN(dev,fmt,args...) \
-        xprintk(dev , KERN_WARNING , fmt , ## args)
-#define INFO(dev,fmt,args...) \
-        xprintk(dev , KERN_INFO , fmt , ## args)
+#define DBG(d, fmt, args...) \
+        dev_dbg(&(d)->gadget->dev , fmt , ## args)
+#define VDBG(d, fmt, args...) \
+        dev_vdbg(&(d)->gadget->dev , fmt , ## args)
+#define ERROR(d, fmt, args...) \
+        dev_err(&(d)->gadget->dev , fmt , ## args)
+#define WARN(d, fmt, args...) \
+        dev_warn(&(d)->gadget->dev , fmt , ## args)
+#define INFO(d, fmt, args...) \
+        dev_info(&(d)->gadget->dev , fmt , ## args)
 
 /*-------------------------------------------------------------------------*/
 
@@ -326,8 +284,6 @@ static const struct usb_descriptor_header *fs_loopback_function [] = {
         NULL,
 };
 
-#ifdef  CONFIG_USB_GADGET_DUALSPEED
-
 /*
  * usb 2.0 devices need to expose both high speed and full speed
  * descriptors, unless they only run at full speed.
@@ -383,17 +339,20 @@ static const struct usb_descriptor_header *hs_loopback_function [] = {
 };
 
 /* maxpacket and other transfer characteristics vary by speed. */
-#define ep_desc(g,hs,fs) (((g)->speed==USB_SPEED_HIGH)?(hs):(fs))
-
-#else
+static inline struct usb_endpoint_descriptor *
+ep_desc(struct usb_gadget *g, struct usb_endpoint_descriptor *hs,
+                struct usb_endpoint_descriptor *fs)
+{
+        if (gadget_is_dualspeed(g) && g->speed == USB_SPEED_HIGH)
+                return hs;
+        return fs;
+}
 
-/* if there's no high speed support, maxpacket doesn't change. */
-#define ep_desc(g,hs,fs) fs
+static char manufacturer[50];
 
-#endif  /* !CONFIG_USB_GADGET_DUALSPEED */
+/* default serial number takes at least two packets */
+static char serial[] = "0123456789.0123456789.0123456789";
 
-static char                             manufacturer [50];
-static char                             serial [40];
 
 /* static strings, in UTF-8 */
 static struct usb_string                strings [] = {
@@ -435,30 +394,29 @@ config_buf (struct usb_gadget *gadget,
         int                             is_source_sink;
         int                             len;
         const struct usb_descriptor_header **function;
-#ifdef CONFIG_USB_GADGET_DUALSPEED
-        int                             hs = (gadget->speed == USB_SPEED_HIGH);
-#endif
+        int                             hs = 0;
 
         /* two configurations will always be index 0 and index 1 */
         if (index > 1)
                 return -EINVAL;
         is_source_sink = loopdefault ? (index == 1) : (index == 0);
 
-#ifdef CONFIG_USB_GADGET_DUALSPEED
-        if (type == USB_DT_OTHER_SPEED_CONFIG)
-                hs = !hs;
+        if (gadget_is_dualspeed(gadget)) {
+                hs = (gadget->speed == USB_SPEED_HIGH);
+                if (type == USB_DT_OTHER_SPEED_CONFIG)
+                        hs = !hs;
+        }
         if (hs)
                 function = is_source_sink
                         ? hs_source_sink_function
                         : hs_loopback_function;
         else
-#endif
                 function = is_source_sink
                         ? fs_source_sink_function
                         : fs_loopback_function;
 
         /* for now, don't advertise srp-only devices */
-        if (!gadget->is_otg)
+        if (!gadget_is_otg(gadget))
                 function++;
 
         len = usb_gadget_config_buf (is_source_sink
@@ -498,6 +456,19 @@ static void free_ep_req (struct usb_ep *ep, struct usb_request *req)
 
 /*-------------------------------------------------------------------------*/
 
+/*
+ * SOURCE/SINK FUNCTION ... a primary testing vehicle for USB peripherals,
+ * this just sinks bulk packets OUT to the peripheral and sources them IN
+ * to the host, optionally with specific data patterns.
+ *
+ * In terms of control messaging, this supports all the standard requests
+ * plus two that support control-OUT tests.
+ *
+ * Note that because this doesn't queue more than one request at a time,
+ * some other function must be used to test queueing logic.  The network
+ * link (g_ether) is probably the best option for that.
+ */
+
 /* optionally require specific source/sink data patterns  */
 
 static int
@@ -534,12 +505,7 @@ check_read_data (
         return 0;
 }
 
-static void
-reinit_write_data (
-        struct zero_dev         *dev,
-        struct usb_ep           *ep,
-        struct usb_request      *req
-)
+static void reinit_write_data(struct usb_ep *ep, struct usb_request *req)
 {
         unsigned        i;
         u8              *buf = req->buf;
@@ -566,16 +532,16 @@ static void source_sink_complete (struct usb_ep *ep, struct usb_request *req)
 
         switch (status) {
 
-        case 0:                         /* normal completion? */
+        case 0:                         /* normal completion? */
                 if (ep == dev->out_ep) {
                         check_read_data (dev, ep, req);
                         memset (req->buf, 0x55, req->length);
                 } else
-                        reinit_write_data (dev, ep, req);
+                        reinit_write_data(ep, req);
                 break;
 
         /* this endpoint is normally active while we're configured */
-        case -ECONNABORTED:             /* hardware forced ep reset */
+        case -ECONNABORTED:             /* hardware forced ep reset */
         case -ECONNRESET:               /* request dequeued */
         case -ESHUTDOWN:                /* disconnect from host */
                 VDBG (dev, "%s gone (%d), %d/%d\n", ep->name, status,
@@ -607,8 +573,7 @@ static void source_sink_complete (struct usb_ep *ep, struct usb_request *req)
         }
 }
 
-static struct usb_request *
-source_sink_start_ep (struct usb_ep *ep, gfp_t gfp_flags)
+static struct usb_request *source_sink_start_ep(struct usb_ep *ep)
 {
         struct usb_request      *req;
         int                     status;
@@ -621,11 +586,11 @@ source_sink_start_ep (struct usb_ep *ep, gfp_t gfp_flags)
         req->complete = source_sink_complete;
 
         if (strcmp (ep->name, EP_IN_NAME) == 0)
-                reinit_write_data (ep->driver_data, ep, req);
+                reinit_write_data(ep, req);
         else
                 memset (req->buf, 0x55, req->length);
 
-        status = usb_ep_queue (ep, req, gfp_flags);
+        status = usb_ep_queue(ep, req, GFP_ATOMIC);
         if (status) {
                 struct zero_dev *dev = ep->driver_data;
 
@@ -637,8 +602,7 @@ source_sink_start_ep (struct usb_ep *ep, gfp_t gfp_flags)
         return req;
 }
 
-static int
-set_source_sink_config (struct zero_dev *dev, gfp_t gfp_flags)
+static int set_source_sink_config(struct zero_dev *dev)
 {
         int                     result = 0;
         struct usb_ep           *ep;
@@ -653,8 +617,7 @@ set_source_sink_config (struct zero_dev *dev, gfp_t gfp_flags)
                         result = usb_ep_enable (ep, d);
                         if (result == 0) {
                                 ep->driver_data = dev;
-                                if (source_sink_start_ep(ep, gfp_flags)
-                                                != NULL) {
+                                if (source_sink_start_ep(ep) != NULL) {
                                         dev->in_ep = ep;
                                         continue;
                                 }
@@ -668,8 +631,7 @@ set_source_sink_config (struct zero_dev *dev, gfp_t gfp_flags)
                         result = usb_ep_enable (ep, d);
                         if (result == 0) {
                                 ep->driver_data = dev;
-                                if (source_sink_start_ep(ep, gfp_flags)
-                                                != NULL) {
+                                if (source_sink_start_ep(ep) != NULL) {
                                         dev->out_ep = ep;
                                         continue;
                                 }
@@ -701,7 +663,7 @@ static void loopback_complete (struct usb_ep *ep, struct usb_request *req)
 
         switch (status) {
 
-        case 0:                         /* normal completion? */
+        case 0:                         /* normal completion? */
                 if (ep == dev->out_ep) {
                         /* loop this OUT packet back IN to the host */
                         req->zero = (req->actual < req->length);
@@ -735,7 +697,7 @@ static void loopback_complete (struct usb_ep *ep, struct usb_request *req)
          * rely on the hardware driver to clean up on disconnect or
          * endpoint disable.
          */
-        case -ECONNABORTED:             /* hardware forced ep reset */
+        case -ECONNABORTED:             /* hardware forced ep reset */
         case -ECONNRESET:               /* request dequeued */
         case -ESHUTDOWN:                /* disconnect from host */
                 free_ep_req (ep, req);
@@ -743,8 +705,7 @@ static void loopback_complete (struct usb_ep *ep, struct usb_request *req)
         }
 }
 
-static int
-set_loopback_config (struct zero_dev *dev, gfp_t gfp_flags)
+static int set_loopback_config(struct zero_dev *dev)
 {
         int                     result = 0;
         struct usb_ep           *ep;
@@ -844,8 +805,7 @@ static void zero_reset_config (struct zero_dev *dev)
  * code can do, perhaps by disallowing more than one configuration or
  * by limiting configuration choices (like the pxa2xx).
  */
-static int
-zero_set_config (struct zero_dev *dev, unsigned number, gfp_t gfp_flags)
+static int zero_set_config(struct zero_dev *dev, unsigned number)
 {
         int                     result = 0;
         struct usb_gadget       *gadget = dev->gadget;
@@ -855,17 +815,17 @@ zero_set_config (struct zero_dev *dev, unsigned number, gfp_t gfp_flags)
 
         if (gadget_is_sa1100 (gadget) && dev->config) {
                 /* tx fifo is full, but we can't clear it...*/
-                INFO (dev, "can't change configurations\n");
+                ERROR(dev, "can't change configurations\n");
                 return -ESPIPE;
         }
         zero_reset_config (dev);
 
         switch (number) {
         case CONFIG_SOURCE_SINK:
-                result = set_source_sink_config (dev, gfp_flags);
+                result = set_source_sink_config(dev);
                 break;
         case CONFIG_LOOPBACK:
-                result = set_loopback_config (dev, gfp_flags);
+                result = set_loopback_config(dev);
                 break;
         default:
                 result = -EINVAL;
@@ -885,7 +845,7 @@ zero_set_config (struct zero_dev *dev, unsigned number, gfp_t gfp_flags)
                 case USB_SPEED_LOW:     speed = "low"; break;
                 case USB_SPEED_FULL:    speed = "full"; break;
                 case USB_SPEED_HIGH:    speed = "high"; break;
-                default:                speed = "?"; break;
+                default:                speed = "?"; break;
                 }
 
                 dev->config = number;
@@ -938,19 +898,17 @@ zero_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
                         value = min (w_length, (u16) sizeof device_desc);
                         memcpy (req->buf, &device_desc, value);
                         break;
-#ifdef CONFIG_USB_GADGET_DUALSPEED
                 case USB_DT_DEVICE_QUALIFIER:
-                        if (!gadget->is_dualspeed)
+                        if (!gadget_is_dualspeed(gadget))
                                 break;
                         value = min (w_length, (u16) sizeof dev_qualifier);
                         memcpy (req->buf, &dev_qualifier, value);
                         break;
 
                 case USB_DT_OTHER_SPEED_CONFIG:
-                        if (!gadget->is_dualspeed)
+                        if (!gadget_is_dualspeed(gadget))
                                 break;
                         // FALLTHROUGH
-#endif /* CONFIG_USB_GADGET_DUALSPEED */
                 case USB_DT_CONFIG:
                         value = config_buf (gadget, req->buf,
                                         w_value >> 8,
@@ -984,7 +942,7 @@ zero_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
                 else
                         VDBG (dev, "HNP inactive\n");
                 spin_lock (&dev->lock);
-                value = zero_set_config (dev, w_value, GFP_ATOMIC);
+                value = zero_set_config(dev, w_value);
                 spin_unlock (&dev->lock);
                 break;
         case USB_REQ_GET_CONFIGURATION:
@@ -1013,7 +971,7 @@ zero_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
                          * use this "reset the config" shortcut.
                          */
                         zero_reset_config (dev);
-                        zero_set_config (dev, config, GFP_ATOMIC);
+                        zero_set_config(dev, config);
                         value = 0;
                 }
                 spin_unlock (&dev->lock);
@@ -1163,7 +1121,7 @@ autoconf_fail:
         }
         EP_IN_NAME = ep->name;
         ep->driver_data = ep;   /* claim */
-        
+
         ep = usb_ep_autoconfig (gadget, &fs_sink_desc);
         if (!ep)
                 goto autoconf_fail;
@@ -1207,16 +1165,18 @@ autoconf_fail:
 
         device_desc.bMaxPacketSize0 = gadget->ep0->maxpacket;
 
-#ifdef CONFIG_USB_GADGET_DUALSPEED
-        /* assume ep0 uses the same value for both speeds ... */
-        dev_qualifier.bMaxPacketSize0 = device_desc.bMaxPacketSize0;
+        if (gadget_is_dualspeed(gadget)) {
+                /* assume ep0 uses the same value for both speeds ... */
+                dev_qualifier.bMaxPacketSize0 = device_desc.bMaxPacketSize0;
 
-        /* and that all endpoints are dual-speed */
-        hs_source_desc.bEndpointAddress = fs_source_desc.bEndpointAddress;
-        hs_sink_desc.bEndpointAddress = fs_sink_desc.bEndpointAddress;
-#endif
+                /* and that all endpoints are dual-speed */
+                hs_source_desc.bEndpointAddress =
+                                fs_source_desc.bEndpointAddress;
+                hs_sink_desc.bEndpointAddress =
+                                fs_sink_desc.bEndpointAddress;
+        }
 
-        if (gadget->is_otg) {
+        if (gadget_is_otg(gadget)) {
                 otg_descriptor.bmAttributes |= USB_OTG_HNP,
                 source_sink_config.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
                 loopback_config.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
@@ -1294,23 +1254,18 @@ static struct usb_gadget_driver zero_driver = {
         .suspend        = zero_suspend,
         .resume         = zero_resume,
 
-        .driver         = {
+        .driver         = {
                 .name           = (char *) shortname,
                 .owner          = THIS_MODULE,
         },
 };
 
-MODULE_AUTHOR ("David Brownell");
-MODULE_LICENSE ("Dual BSD/GPL");
+MODULE_AUTHOR("David Brownell");
+MODULE_LICENSE("GPL");
 
 
 static int __init init (void)
 {
-        /* a real value would likely come through some id prom
-         * or module option.  this one takes at least two packets.
-         */
-        strlcpy (serial, "0123456789.0123456789.0123456789", sizeof serial);
-
         return usb_gadget_register_driver (&zero_driver);
 }
 module_init (init);
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 2f529828c74d..c978d622fa8a 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -154,6 +154,19 @@ config USB_OHCI_HCD_PCI
           Enables support for PCI-bus plug-in USB controller cards.
           If unsure, say Y.
 
+config USB_OHCI_HCD_SSB
+        bool "OHCI support for Broadcom SSB OHCI core"
+        depends on USB_OHCI_HCD && SSB && EXPERIMENTAL
+        default n
+        ---help---
+          Support for the Sonics Silicon Backplane (SSB) attached
+          Broadcom USB OHCI core.
+
+          This device is present in some embedded devices with
+          Broadcom based SSB bus.
+
+          If unsure, say N.
+
 config USB_OHCI_BIG_ENDIAN_DESC
         bool
         depends on USB_OHCI_HCD
@@ -237,7 +250,7 @@ config USB_SL811_CS
           module will be called "sl811_cs".
 
 config USB_R8A66597_HCD
-        tristate "R8A66597 HCD suppoort"
+        tristate "R8A66597 HCD support"
         depends on USB
         help
           The R8A66597 is a USB 2.0 host and peripheral controller.
diff --git a/drivers/usb/host/ehci-au1xxx.c b/drivers/usb/host/ehci-au1xxx.c
index 5d1b12aad776..766ef68a0b43 100644
--- a/drivers/usb/host/ehci-au1xxx.c
+++ b/drivers/usb/host/ehci-au1xxx.c
@@ -1,8 +1,6 @@
 /*
  * EHCI HCD (Host Controller Driver) for USB.
  *
- * (C) Copyright 2000-2004 David Brownell <dbrownell@users.sourceforge.net>
- *
  * Bus Glue for AMD Alchemy Au1xxx
  *
  * Based on "ohci-au1xxx.c" by Matt Porter <mporter@kernel.crashing.org>
@@ -196,6 +194,9 @@ static const struct hc_driver ehci_au1xxx_hc_driver = {
 
         /*
          * basic lifecycle operations
+         *
+         * FIXME -- ehci_init() doesn't do enough here.
+         * See ehci-ppc-soc for a complete implementation.
          */
         .reset = ehci_init,
         .start = ehci_run,
@@ -219,10 +220,8 @@ static const struct hc_driver ehci_au1xxx_hc_driver = {
          */
         .hub_status_data = ehci_hub_status_data,
         .hub_control = ehci_hub_control,
-#ifdef  CONFIG_PM
-        .hub_suspend = ehci_hub_suspend,
-        .hub_resume = ehci_hub_resume,
-#endif
+        .bus_suspend = ehci_bus_suspend,
+        .bus_resume = ehci_bus_resume,
 };
 
 /*-------------------------------------------------------------------------*/
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index c4e15ed1405a..c1514442883e 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -275,58 +275,6 @@ static void ehci_work(struct ehci_hcd *ehci);
 
 /*-------------------------------------------------------------------------*/
 
-#ifdef CONFIG_CPU_FREQ
-
-#include <linux/cpufreq.h>
-
-static void ehci_cpufreq_pause (struct ehci_hcd *ehci)
-{
-        unsigned long   flags;
-
-        spin_lock_irqsave(&ehci->lock, flags);
-        if (!ehci->cpufreq_changing++)
-                qh_inactivate_split_intr_qhs(ehci);
-        spin_unlock_irqrestore(&ehci->lock, flags);
-}
-
-static void ehci_cpufreq_unpause (struct ehci_hcd *ehci)
-{
-        unsigned long   flags;
-
-        spin_lock_irqsave(&ehci->lock, flags);
-        if (!--ehci->cpufreq_changing)
-                qh_reactivate_split_intr_qhs(ehci);
-        spin_unlock_irqrestore(&ehci->lock, flags);
-}
-
-/*
- * ehci_cpufreq_notifier is needed to avoid MMF errors that occur when
- * EHCI controllers that don't cache many uframes get delayed trying to
- * read main memory during CPU frequency transitions.  This can cause
- * split interrupt transactions to not be completed in the required uframe.
- * This has been observed on the Broadcom/ServerWorks HT1000 controller.
- */
-static int ehci_cpufreq_notifier(struct notifier_block *nb, unsigned long val,
-                                 void *data)
-{
-        struct ehci_hcd *ehci = container_of(nb, struct ehci_hcd,
-                                             cpufreq_transition);
-
-        switch (val) {
-        case CPUFREQ_PRECHANGE:
-                ehci_cpufreq_pause(ehci);
-                break;
-        case CPUFREQ_POSTCHANGE:
-                ehci_cpufreq_unpause(ehci);
-                break;
-        }
-        return 0;
-}
-
-#endif
-
-/*-------------------------------------------------------------------------*/
-
 static void ehci_watchdog (unsigned long param)
 {
         struct ehci_hcd         *ehci = (struct ehci_hcd *) param;
@@ -460,10 +408,6 @@ static void ehci_stop (struct usb_hcd *hcd)
         ehci_writel(ehci, 0, &ehci->regs->intr_enable);
         spin_unlock_irq(&ehci->lock);
 
-#ifdef CONFIG_CPU_FREQ
-        cpufreq_unregister_notifier(&ehci->cpufreq_transition,
-                                    CPUFREQ_TRANSITION_NOTIFIER);
-#endif
         /* let companion controllers work when we aren't */
         ehci_writel(ehci, 0, &ehci->regs->configured_flag);
 
@@ -569,17 +513,6 @@ static int ehci_init(struct usb_hcd *hcd)
         }
         ehci->command = temp;
 
-#ifdef CONFIG_CPU_FREQ
-        INIT_LIST_HEAD(&ehci->split_intr_qhs);
-        /*
-         * If the EHCI controller caches enough uframes, this probably
-         * isn't needed unless there are so many low/full speed devices
-         * that the controller's can't cache it all.
-         */
-        ehci->cpufreq_transition.notifier_call = ehci_cpufreq_notifier;
-        cpufreq_register_notifier(&ehci->cpufreq_transition,
-                                  CPUFREQ_TRANSITION_NOTIFIER);
-#endif
         return 0;
 }
 
@@ -637,10 +570,18 @@ static int ehci_run (struct usb_hcd *hcd)
          * are explicitly handed to companion controller(s), so no TT is
          * involved with the root hub.  (Except where one is integrated,
          * and there's no companion controller unless maybe for USB OTG.)
+         *
+         * Turning on the CF flag will transfer ownership of all ports
+         * from the companions to the EHCI controller.  If any of the
+         * companions are in the middle of a port reset at the time, it
+         * could cause trouble.  Write-locking ehci_cf_port_reset_rwsem
+         * guarantees that no resets are in progress.
          */
+        down_write(&ehci_cf_port_reset_rwsem);
         hcd->state = HC_STATE_RUNNING;
         ehci_writel(ehci, FLAG_CF, &ehci->regs->configured_flag);
         ehci_readl(ehci, &ehci->regs->command); /* unblock posted writes */
+        up_write(&ehci_cf_port_reset_rwsem);
 
         temp = HC_VERSION(ehci_readl(ehci, &ehci->caps->hc_capbase));
         ehci_info (ehci,
@@ -786,7 +727,6 @@ dead:
  */
 static int ehci_urb_enqueue (
         struct usb_hcd  *hcd,
-        struct usb_host_endpoint *ep,
         struct urb      *urb,
         gfp_t           mem_flags
 ) {
@@ -801,12 +741,12 @@ static int ehci_urb_enqueue (
         default:
                 if (!qh_urb_transaction (ehci, urb, &qtd_list, mem_flags))
                         return -ENOMEM;
-                return submit_async (ehci, ep, urb, &qtd_list, mem_flags);
+                return submit_async(ehci, urb, &qtd_list, mem_flags);
 
         case PIPE_INTERRUPT:
                 if (!qh_urb_transaction (ehci, urb, &qtd_list, mem_flags))
                         return -ENOMEM;
-                return intr_submit (ehci, ep, urb, &qtd_list, mem_flags);
+                return intr_submit(ehci, urb, &qtd_list, mem_flags);
 
         case PIPE_ISOCHRONOUS:
                 if (urb->dev->speed == USB_SPEED_HIGH)
@@ -844,13 +784,18 @@ static void unlink_async (struct ehci_hcd *ehci, struct ehci_qh *qh)
  * completions normally happen asynchronously
  */
 
-static int ehci_urb_dequeue (struct usb_hcd *hcd, struct urb *urb)
+static int ehci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
 {
         struct ehci_hcd         *ehci = hcd_to_ehci (hcd);
         struct ehci_qh          *qh;
         unsigned long           flags;
+        int                     rc;
 
         spin_lock_irqsave (&ehci->lock, flags);
+        rc = usb_hcd_check_unlink_urb(hcd, urb, status);
+        if (rc)
+                goto done;
+
         switch (usb_pipetype (urb->pipe)) {
         // case PIPE_CONTROL:
         // case PIPE_BULK:
@@ -905,7 +850,7 @@ static int ehci_urb_dequeue (struct usb_hcd *hcd, struct urb *urb)
         }
 done:
         spin_unlock_irqrestore (&ehci->lock, flags);
-        return 0;
+        return rc;
 }
 
 /*-------------------------------------------------------------------------*/
diff --git a/drivers/usb/host/ehci-mem.c b/drivers/usb/host/ehci-mem.c
index 8816d09903d0..0431397836f6 100644
--- a/drivers/usb/host/ehci-mem.c
+++ b/drivers/usb/host/ehci-mem.c
@@ -94,9 +94,6 @@ static struct ehci_qh *ehci_qh_alloc (struct ehci_hcd *ehci, gfp_t flags)
         qh->qh_dma = dma;
         // INIT_LIST_HEAD (&qh->qh_list);
         INIT_LIST_HEAD (&qh->qtd_list);
-#ifdef CONFIG_CPU_FREQ
-        INIT_LIST_HEAD (&qh->split_intr_qhs);
-#endif
 
         /* dummy td enables safe urb queuing */
         qh->dummy = ehci_qtd_alloc (ehci, flags);
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index a7816e392a85..ad0d4965f2fb 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -58,8 +58,6 @@ static int ehci_pci_reinit(struct ehci_hcd *ehci, struct pci_dev *pdev)
         if (!retval)
                 ehci_dbg(ehci, "MWI active\n");
 
-        ehci_port_power(ehci, 0);
-
         return 0;
 }
 
@@ -156,8 +154,7 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
                 break;
         }
 
-        if (ehci_is_TDI(ehci))
-                ehci_reset(ehci);
+        ehci_reset(ehci);
 
         /* at least the Genesys GL880S needs fixup here */
         temp = HCS_N_CC(ehci->hcs_params) * HCS_N_PCC(ehci->hcs_params);
diff --git a/drivers/usb/host/ehci-ppc-soc.c b/drivers/usb/host/ehci-ppc-soc.c
index c2cedb09ed8b..452d4b1bc859 100644
--- a/drivers/usb/host/ehci-ppc-soc.c
+++ b/drivers/usb/host/ehci-ppc-soc.c
@@ -6,7 +6,7 @@
  * Bus Glue for PPC On-Chip EHCI driver
  * Tested on AMCC 440EPx
  *
- * Based on "ehci-au12xx.c" by David Brownell <dbrownell@users.sourceforge.net>
+ * Based on "ehci-au1xxx.c" by K.Boge <karsten.boge@amd.com>
  *
  * This file is licenced under the GPL.
  */
@@ -15,6 +15,24 @@
 
 extern int usb_disabled(void);
 
+/* called during probe() after chip reset completes */
+static int ehci_ppc_soc_setup(struct usb_hcd *hcd)
+{
+        struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+        int             retval;
+
+        retval = ehci_halt(ehci);
+        if (retval)
+                return retval;
+
+        retval = ehci_init(hcd);
+        if (retval)
+                return retval;
+
+        ehci->sbrn = 0x20;
+        return ehci_reset(ehci);
+}
+
 /**
  * usb_ehci_ppc_soc_probe - initialize PPC-SoC-based HCDs
  * Context: !in_interrupt()
@@ -120,7 +138,7 @@ static const struct hc_driver ehci_ppc_soc_hc_driver = {
         /*
          * basic lifecycle operations
          */
-        .reset = ehci_init,
+        .reset = ehci_ppc_soc_setup,
         .start = ehci_run,
         .stop = ehci_stop,
         .shutdown = ehci_shutdown,
@@ -142,10 +160,8 @@ static const struct hc_driver ehci_ppc_soc_hc_driver = {
          */
         .hub_status_data = ehci_hub_status_data,
         .hub_control = ehci_hub_control,
-#ifdef  CONFIG_PM
-        .hub_suspend = ehci_hub_suspend,
-        .hub_resume = ehci_hub_resume,
-#endif
+        .bus_suspend = ehci_bus_suspend,
+        .bus_resume = ehci_bus_resume,
 };
 
 static int ehci_hcd_ppc_soc_drv_probe(struct platform_device *pdev)
diff --git a/drivers/usb/host/ehci-ps3.c b/drivers/usb/host/ehci-ps3.c
index 829fe649a981..03a6b2f4e6ed 100644
--- a/drivers/usb/host/ehci-ps3.c
+++ b/drivers/usb/host/ehci-ps3.c
@@ -47,7 +47,7 @@ static int ps3_ehci_hc_reset(struct usb_hcd *hcd)
         if (result)
                 return result;
 
-        ehci_port_power(ehci, 0);
+        ehci_reset(ehci);
 
         return result;
 }
diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c
index 2284028f8aa5..b10f39c047e9 100644
--- a/drivers/usb/host/ehci-q.c
+++ b/drivers/usb/host/ehci-q.c
@@ -139,63 +139,65 @@ qh_refresh (struct ehci_hcd *ehci, struct ehci_qh *qh)
 
 /*-------------------------------------------------------------------------*/
 
-static void qtd_copy_status (
+static int qtd_copy_status (
         struct ehci_hcd *ehci,
         struct urb *urb,
         size_t length,
         u32 token
 )
 {
+        int     status = -EINPROGRESS;
+
         /* count IN/OUT bytes, not SETUP (even short packets) */
         if (likely (QTD_PID (token) != 2))
                 urb->actual_length += length - QTD_LENGTH (token);
 
         /* don't modify error codes */
-        if (unlikely (urb->status != -EINPROGRESS))
-                return;
+        if (unlikely(urb->unlinked))
+                return status;
 
         /* force cleanup after short read; not always an error */
         if (unlikely (IS_SHORT_READ (token)))
-                urb->status = -EREMOTEIO;
+                status = -EREMOTEIO;
 
         /* serious "can't proceed" faults reported by the hardware */
         if (token & QTD_STS_HALT) {
                 if (token & QTD_STS_BABBLE) {
                         /* FIXME "must" disable babbling device's port too */
-                        urb->status = -EOVERFLOW;
+                        status = -EOVERFLOW;
                 } else if (token & QTD_STS_MMF) {
                         /* fs/ls interrupt xfer missed the complete-split */
-                        urb->status = -EPROTO;
+                        status = -EPROTO;
                 } else if (token & QTD_STS_DBE) {
-                        urb->status = (QTD_PID (token) == 1) /* IN ? */
+                        status = (QTD_PID (token) == 1) /* IN ? */
                                 ? -ENOSR  /* hc couldn't read data */
                                 : -ECOMM; /* hc couldn't write data */
                 } else if (token & QTD_STS_XACT) {
                         /* timeout, bad crc, wrong PID, etc; retried */
                         if (QTD_CERR (token))
-                                urb->status = -EPIPE;
+                                status = -EPIPE;
                         else {
                                 ehci_dbg (ehci, "devpath %s ep%d%s 3strikes\n",
                                         urb->dev->devpath,
                                         usb_pipeendpoint (urb->pipe),
                                         usb_pipein (urb->pipe) ? "in" : "out");
-                                urb->status = -EPROTO;
+                                status = -EPROTO;
                         }
                 /* CERR nonzero + no errors + halt --> stall */
                 } else if (QTD_CERR (token))
-                        urb->status = -EPIPE;
+                        status = -EPIPE;
                 else    /* unknown */
-                        urb->status = -EPROTO;
+                        status = -EPROTO;
 
                 ehci_vdbg (ehci,
                         "dev%d ep%d%s qtd token %08x --> status %d\n",
                         usb_pipedevice (urb->pipe),
                         usb_pipeendpoint (urb->pipe),
                         usb_pipein (urb->pipe) ? "in" : "out",
-                        token, urb->status);
+                        token, status);
 
                 /* if async CSPLIT failed, try cleaning out the TT buffer */
-                if (urb->status != -EPIPE
+                if (status != -EPIPE
                                 && urb->dev->tt && !usb_pipeint (urb->pipe)
                                 && ((token & QTD_STS_MMF) != 0
                                         || QTD_CERR(token) == 0)
@@ -212,10 +214,12 @@ static void qtd_copy_status (
                         usb_hub_tt_clear_buffer (urb->dev, urb->pipe);
                 }
         }
+
+        return status;
 }
 
 static void
-ehci_urb_done (struct ehci_hcd *ehci, struct urb *urb)
+ehci_urb_done(struct ehci_hcd *ehci, struct urb *urb, int status)
 __releases(ehci->lock)
 __acquires(ehci->lock)
 {
@@ -231,25 +235,13 @@ __acquires(ehci->lock)
                 qh_put (qh);
         }
 
-        spin_lock (&urb->lock);
-        urb->hcpriv = NULL;
-        switch (urb->status) {
-        case -EINPROGRESS:              /* success */
-                urb->status = 0;
-        default:                        /* fault */
-                COUNT (ehci->stats.complete);
-                break;
-        case -EREMOTEIO:                /* fault or normal */
-                if (!(urb->transfer_flags & URB_SHORT_NOT_OK))
-                        urb->status = 0;
-                COUNT (ehci->stats.complete);
-                break;
-        case -ECONNRESET:               /* canceled */
-        case -ENOENT:
-                COUNT (ehci->stats.unlink);
-                break;
+        if (unlikely(urb->unlinked)) {
+                COUNT(ehci->stats.unlink);
+        } else {
+                if (likely(status == -EINPROGRESS))
+                        status = 0;
+                COUNT(ehci->stats.complete);
         }
-        spin_unlock (&urb->lock);
 
 #ifdef EHCI_URB_TRACE
         ehci_dbg (ehci,
@@ -257,13 +249,14 @@ __acquires(ehci->lock)
                 __FUNCTION__, urb->dev->devpath, urb,
                 usb_pipeendpoint (urb->pipe),
                 usb_pipein (urb->pipe) ? "in" : "out",
-                urb->status,
+                status,
                 urb->actual_length, urb->transfer_buffer_length);
 #endif
 
         /* complete() can reenter this HCD */
+        usb_hcd_unlink_urb_from_ep(ehci_to_hcd(ehci), urb);
         spin_unlock (&ehci->lock);
-        usb_hcd_giveback_urb (ehci_to_hcd(ehci), urb);
+        usb_hcd_giveback_urb(ehci_to_hcd(ehci), urb, status);
         spin_lock (&ehci->lock);
 }
 
@@ -283,6 +276,7 @@ qh_completions (struct ehci_hcd *ehci, struct ehci_qh *qh)
 {
         struct ehci_qtd         *last = NULL, *end = qh->dummy;
         struct list_head        *entry, *tmp;
+        int                     last_status = -EINPROGRESS;
         int                     stopped;
         unsigned                count = 0;
         int                     do_status = 0;
@@ -311,10 +305,7 @@ qh_completions (struct ehci_hcd *ehci, struct ehci_qh *qh)
                 struct ehci_qtd *qtd;
                 struct urb      *urb;
                 u32             token = 0;
-
-                /* ignore QHs that are currently inactive */
-                if (qh->hw_info1 & __constant_cpu_to_le32(QH_INACTIVATE))
-                        break;
+                int             qtd_status;
 
                 qtd = list_entry (entry, struct ehci_qtd, qtd_list);
                 urb = qtd->urb;
@@ -322,11 +313,12 @@ qh_completions (struct ehci_hcd *ehci, struct ehci_qh *qh)
                 /* clean up any state from previous QTD ...*/
                 if (last) {
                         if (likely (last->urb != urb)) {
-                                ehci_urb_done (ehci, last->urb);
+                                ehci_urb_done(ehci, last->urb, last_status);
                                 count++;
                         }
                         ehci_qtd_free (ehci, last);
                         last = NULL;
+                        last_status = -EINPROGRESS;
                 }
 
                 /* ignore urbs submitted during completions we reported */
@@ -362,13 +354,14 @@ qh_completions (struct ehci_hcd *ehci, struct ehci_qh *qh)
                         stopped = 1;
 
                         if (unlikely (!HC_IS_RUNNING (ehci_to_hcd(ehci)->state)))
-                                urb->status = -ESHUTDOWN;
+                                last_status = -ESHUTDOWN;
 
                         /* ignore active urbs unless some previous qtd
                          * for the urb faulted (including short read) or
                          * its urb was canceled.  we may patch qh or qtds.
                          */
-                        if (likely (urb->status == -EINPROGRESS))
+                        if (likely(last_status == -EINPROGRESS &&
+                                        !urb->unlinked))
                                 continue;
 
                         /* issue status after short control reads */
@@ -396,11 +389,14 @@ halt:
                 }
 
                 /* remove it from the queue */
-                spin_lock (&urb->lock);
-                qtd_copy_status (ehci, urb, qtd->length, token);
-                do_status = (urb->status == -EREMOTEIO)
-                                && usb_pipecontrol (urb->pipe);
-                spin_unlock (&urb->lock);
+                qtd_status = qtd_copy_status(ehci, urb, qtd->length, token);
+                if (unlikely(qtd_status == -EREMOTEIO)) {
+                        do_status = (!urb->unlinked &&
+                                        usb_pipecontrol(urb->pipe));
+                        qtd_status = 0;
+                }
+                if (likely(last_status == -EINPROGRESS))
+                        last_status = qtd_status;
 
                 if (stopped && qtd->qtd_list.prev != &qh->qtd_list) {
                         last = list_entry (qtd->qtd_list.prev,
@@ -413,7 +409,7 @@ halt:
 
         /* last urb's completion might still need calling */
         if (likely (last != NULL)) {
-                ehci_urb_done (ehci, last->urb);
+                ehci_urb_done(ehci, last->urb, last_status);
                 count++;
                 ehci_qtd_free (ehci, last);
         }
@@ -917,7 +913,6 @@ static struct ehci_qh *qh_append_tds (
 static int
 submit_async (
         struct ehci_hcd         *ehci,
-        struct usb_host_endpoint *ep,
         struct urb              *urb,
         struct list_head        *qtd_list,
         gfp_t                   mem_flags
@@ -926,10 +921,10 @@ submit_async (
         int                     epnum;
         unsigned long           flags;
         struct ehci_qh          *qh = NULL;
-        int                     rc = 0;
+        int                     rc;
 
         qtd = list_entry (qtd_list->next, struct ehci_qtd, qtd_list);
-        epnum = ep->desc.bEndpointAddress;
+        epnum = urb->ep->desc.bEndpointAddress;
 
 #ifdef EHCI_URB_TRACE
         ehci_dbg (ehci,
@@ -937,7 +932,7 @@ submit_async (
                 __FUNCTION__, urb->dev->devpath, urb,
                 epnum & 0x0f, (epnum & USB_DIR_IN) ? "in" : "out",
                 urb->transfer_buffer_length,
-                qtd, ep->hcpriv);
+                qtd, urb->ep->hcpriv);
 #endif
 
         spin_lock_irqsave (&ehci->lock, flags);
@@ -946,9 +941,13 @@ submit_async (
                 rc = -ESHUTDOWN;
                 goto done;
         }
+        rc = usb_hcd_link_urb_to_ep(ehci_to_hcd(ehci), urb);
+        if (unlikely(rc))
+                goto done;
 
-        qh = qh_append_tds (ehci, urb, qtd_list, epnum, &ep->hcpriv);
+        qh = qh_append_tds(ehci, urb, qtd_list, epnum, &urb->ep->hcpriv);
         if (unlikely(qh == NULL)) {
+                usb_hcd_unlink_urb_from_ep(ehci_to_hcd(ehci), urb);
                 rc = -ENOMEM;
                 goto done;
         }
diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c
index d4a8ace49676..80d99bce2b38 100644
--- a/drivers/usb/host/ehci-sched.c
+++ b/drivers/usb/host/ehci-sched.c
@@ -479,109 +479,6 @@ static int disable_periodic (struct ehci_hcd *ehci)
 }
 
 /*-------------------------------------------------------------------------*/
-#ifdef CONFIG_CPU_FREQ
-
-static int safe_to_modify_i (struct ehci_hcd *ehci, struct ehci_qh *qh)
-{
-        int now; /* current (frame * 8) + uframe */
-        int prev_start, next_start; /* uframes from/to split start */
-        int start_uframe = ffs(le32_to_cpup (&qh->hw_info2) & QH_SMASK);
-        int end_uframe = fls((le32_to_cpup (&qh->hw_info2) & QH_CMASK) >> 8);
-        int split_duration = end_uframe - start_uframe;
-
-        now = readl(&ehci->regs->frame_index) % (ehci->periodic_size << 3);
-
-        next_start = ((1024 << 3) + (qh->start << 3) + start_uframe - now)
-                        % (qh->period << 3);
-        prev_start = (qh->period << 3) - next_start;
-
-        /*
-         * Make sure there will be at least one uframe when qh is safe.
-         */
-        if ((qh->period << 3) <= (ehci->i_thresh + 2 + split_duration))
-                /* never safe */
-                return -EINVAL;
-
-        /*
-         * Wait 1 uframe after transaction should have started, to make
-         * sure controller has time to write back overlay, so we can
-         * check QTD_STS_STS to see if transaction is in progress.
-         */
-        if ((next_start > ehci->i_thresh) && (prev_start > 1))
-                /* safe to set "i" bit if split isn't in progress */
-                return (qh->hw_token & STATUS_BIT(ehci)) ? 0 : 1;
-        else
-                return 0;
-}
-
-/* Set inactivate bit for all the split interrupt QHs. */
-static void qh_inactivate_split_intr_qhs (struct ehci_hcd *ehci)
-{
-        struct ehci_qh  *qh;
-        int             not_done, safe;
-        u32             inactivate = INACTIVATE_BIT(ehci);
-        u32             active = ACTIVE_BIT(ehci);
-
-        do {
-                not_done = 0;
-                list_for_each_entry(qh, &ehci->split_intr_qhs,
-                                split_intr_qhs) {
-                        if (qh->hw_info1 & inactivate)
-                                /* already off */
-                                continue;
-                        /*
-                         * To avoid setting "I" after the start split happens,
-                         * don't set it if the QH might be cached in the
-                         * controller.  Some HCs (Broadcom/ServerWorks HT1000)
-                         * will stop in the middle of a split transaction when
-                         * the "I" bit is set.
-                         */
-                        safe = safe_to_modify_i(ehci, qh);
-                        if (safe == 0) {
-                                not_done = 1;
-                        } else if (safe > 0) {
-                                qh->was_active = qh->hw_token & active;
-                                qh->hw_info1 |= inactivate;
-                        }
-                }
-        } while (not_done);
-        wmb();
-}
-
-static void qh_reactivate_split_intr_qhs (struct ehci_hcd *ehci)
-{
-        struct ehci_qh  *qh;
-        u32             token;
-        int             not_done, safe;
-        u32             inactivate = INACTIVATE_BIT(ehci);
-        u32             active = ACTIVE_BIT(ehci);
-        u32             halt = HALT_BIT(ehci);
-
-        do {
-                not_done = 0;
-                list_for_each_entry(qh, &ehci->split_intr_qhs, split_intr_qhs) {
-                        if (!(qh->hw_info1 & inactivate)) /* already on */
-                                continue;
-                        /*
-                         * Don't reactivate if cached, or controller might
-                         * overwrite overlay after we modify it!
-                         */
-                        safe = safe_to_modify_i(ehci, qh);
-                        if (safe == 0) {
-                                not_done = 1;
-                        } else if (safe > 0) {
-                                /* See EHCI 1.0 section 4.15.2.4. */
-                                token = qh->hw_token;
-                                qh->hw_token = (token | halt) & ~active;
-                                wmb();
-                                qh->hw_info1 &= ~inactivate;
-                                wmb();
-                                qh->hw_token = (token & ~halt) | qh->was_active;
-                        }
-                }
-        } while (not_done);
-}
-#endif
 
 /* periodic schedule slots have iso tds (normal or split) first, then a
  * sparse tree for active interrupt transfers.
@@ -599,17 +496,6 @@ static int qh_link_periodic (struct ehci_hcd *ehci, struct ehci_qh *qh)
                 period, hc32_to_cpup(ehci, &qh->hw_info2) & (QH_CMASK | QH_SMASK),
                 qh, qh->start, qh->usecs, qh->c_usecs);
 
-#ifdef CONFIG_CPU_FREQ
-        /*
-         * If low/full speed interrupt QHs are inactive (because of
-         * cpufreq changing processor speeds), start QH with I flag set--
-         * it will automatically be cleared when cpufreq is done.
-         */
-        if (ehci->cpufreq_changing)
-                if (!(qh->hw_info1 & (cpu_to_le32(1 << 13))))
-                        qh->hw_info1 |= INACTIVATE_BIT(ehci);
-#endif
-
         /* high bandwidth, or otherwise every microframe */
         if (period == 0)
                 period = 1;
@@ -658,12 +544,6 @@ static int qh_link_periodic (struct ehci_hcd *ehci, struct ehci_qh *qh)
                 ? ((qh->usecs + qh->c_usecs) / qh->period)
                 : (qh->usecs * 8);
 
-#ifdef CONFIG_CPU_FREQ
-        /* add qh to list of low/full speed interrupt QHs, if applicable */
-        if (!(qh->hw_info1 & (cpu_to_le32(1 << 13)))) {
-                list_add(&qh->split_intr_qhs, &ehci->split_intr_qhs);
-        }
-#endif
         /* maybe enable periodic schedule processing */
         if (!ehci->periodic_sched++)
                 return enable_periodic (ehci);
@@ -683,13 +563,6 @@ static void qh_unlink_periodic (struct ehci_hcd *ehci, struct ehci_qh *qh)
         // THEN
         //   qh->hw_info1 |= __constant_cpu_to_hc32(1 << 7 /* "ignore" */);
 
-#ifdef CONFIG_CPU_FREQ
-        /* remove qh from list of low/full speed interrupt QHs */
-        if (!(qh->hw_info1 & (cpu_to_le32(1 << 13)))) {
-                list_del_init(&qh->split_intr_qhs);
-        }
-#endif
-
         /* high bandwidth, or otherwise part of every microframe */
         if ((period = qh->period) == 0)
                 period = 1;
@@ -924,7 +797,6 @@ done:
 
 static int intr_submit (
         struct ehci_hcd         *ehci,
-        struct usb_host_endpoint *ep,
         struct urb              *urb,
         struct list_head        *qtd_list,
         gfp_t                   mem_flags
@@ -932,23 +804,26 @@ static int intr_submit (
         unsigned                epnum;
         unsigned long           flags;
         struct ehci_qh          *qh;
-        int                     status = 0;
+        int                     status;
         struct list_head        empty;
 
         /* get endpoint and transfer/schedule data */
-        epnum = ep->desc.bEndpointAddress;
+        epnum = urb->ep->desc.bEndpointAddress;
 
         spin_lock_irqsave (&ehci->lock, flags);
 
         if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE,
                         &ehci_to_hcd(ehci)->flags))) {
                 status = -ESHUTDOWN;
-                goto done;
+                goto done_not_linked;
         }
+        status = usb_hcd_link_urb_to_ep(ehci_to_hcd(ehci), urb);
+        if (unlikely(status))
+                goto done_not_linked;
 
         /* get qh and force any scheduling errors */
         INIT_LIST_HEAD (&empty);
-        qh = qh_append_tds (ehci, urb, &empty, epnum, &ep->hcpriv);
+        qh = qh_append_tds(ehci, urb, &empty, epnum, &urb->ep->hcpriv);
         if (qh == NULL) {
                 status = -ENOMEM;
                 goto done;
@@ -959,13 +834,16 @@ static int intr_submit (
         }
 
         /* then queue the urb's tds to the qh */
-        qh = qh_append_tds (ehci, urb, qtd_list, epnum, &ep->hcpriv);
+        qh = qh_append_tds(ehci, urb, qtd_list, epnum, &urb->ep->hcpriv);
         BUG_ON (qh == NULL);
 
         /* ... update usbfs periodic stats */
         ehci_to_hcd(ehci)->self.bandwidth_int_reqs++;
 
 done:
+        if (unlikely(status))
+                usb_hcd_unlink_urb_from_ep(ehci_to_hcd(ehci), urb);
+done_not_linked:
         spin_unlock_irqrestore (&ehci->lock, flags);
         if (status)
                 qtd_list_free (ehci, urb, qtd_list);
@@ -1749,7 +1627,7 @@ itd_complete (
 
         /* give urb back to the driver ... can be out-of-order */
         dev = urb->dev;
-        ehci_urb_done (ehci, urb);
+        ehci_urb_done(ehci, urb, 0);
         urb = NULL;
 
         /* defer stopping schedule; completion can submit */
@@ -1813,12 +1691,19 @@ static int itd_submit (struct ehci_hcd *ehci, struct urb *urb,
         /* schedule ... need to lock */
         spin_lock_irqsave (&ehci->lock, flags);
         if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE,
-                               &ehci_to_hcd(ehci)->flags)))
+                               &ehci_to_hcd(ehci)->flags))) {
                 status = -ESHUTDOWN;
-        else
-                status = iso_stream_schedule (ehci, urb, stream);
+                goto done_not_linked;
+        }
+        status = usb_hcd_link_urb_to_ep(ehci_to_hcd(ehci), urb);
+        if (unlikely(status))
+                goto done_not_linked;
+        status = iso_stream_schedule(ehci, urb, stream);
         if (likely (status == 0))
                 itd_link_urb (ehci, urb, ehci->periodic_size << 3, stream);
+        else
+                usb_hcd_unlink_urb_from_ep(ehci_to_hcd(ehci), urb);
+done_not_linked:
         spin_unlock_irqrestore (&ehci->lock, flags);
 
 done:
@@ -2115,7 +2000,7 @@ sitd_complete (
 
         /* give urb back to the driver */
         dev = urb->dev;
-        ehci_urb_done (ehci, urb);
+        ehci_urb_done(ehci, urb, 0);
         urb = NULL;
 
         /* defer stopping schedule; completion can submit */
@@ -2176,12 +2061,19 @@ static int sitd_submit (struct ehci_hcd *ehci, struct urb *urb,
         /* schedule ... need to lock */
         spin_lock_irqsave (&ehci->lock, flags);
         if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE,
-                               &ehci_to_hcd(ehci)->flags)))
+                               &ehci_to_hcd(ehci)->flags))) {
                 status = -ESHUTDOWN;
-        else
-                status = iso_stream_schedule (ehci, urb, stream);
+                goto done_not_linked;
+        }
+        status = usb_hcd_link_urb_to_ep(ehci_to_hcd(ehci), urb);
+        if (unlikely(status))
+                goto done_not_linked;
+        status = iso_stream_schedule(ehci, urb, stream);
         if (status == 0)
                 sitd_link_urb (ehci, urb, ehci->periodic_size << 3, stream);
+        else
+                usb_hcd_unlink_urb_from_ep(ehci_to_hcd(ehci), urb);
+done_not_linked:
         spin_unlock_irqrestore (&ehci->lock, flags);
 
 done:
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index 2c68a04230c1..951d69fec513 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -71,12 +71,6 @@ struct ehci_hcd {			/* one per controller */
         __u32                   hcs_params;     /* cached register copy */
         spinlock_t              lock;
 
-#ifdef CONFIG_CPU_FREQ
-        struct notifier_block   cpufreq_transition;
-        int                     cpufreq_changing;
-        struct list_head        split_intr_qhs;
-#endif
-
         /* async schedule support */
         struct ehci_qh          *async;
         struct ehci_qh          *reclaim;
@@ -439,10 +433,6 @@ struct ehci_qh {
         __hc32                  hw_next;        /* see EHCI 3.6.1 */
         __hc32                  hw_info1;       /* see EHCI 3.6.2 */
 #define QH_HEAD         0x00008000
-#define QH_INACTIVATE   0x00000080
-
-#define INACTIVATE_BIT(ehci)    cpu_to_hc32(ehci, QH_INACTIVATE)
-
         __hc32                  hw_info2;        /* see EHCI 3.6.2 */
 #define QH_SMASK        0x000000ff
 #define QH_CMASK        0x0000ff00
@@ -492,10 +482,6 @@ struct ehci_qh {
         unsigned short          start;          /* where polling starts */
 #define NO_FRAME ((unsigned short)~0)                   /* pick new start */
         struct usb_device       *dev;           /* access to TT */
-#ifdef CONFIG_CPU_FREQ
-        struct list_head        split_intr_qhs; /* list of split qhs */
-        __le32                  was_active;     /* active bit before "i" set */
-#endif
 } __attribute__ ((aligned (32)));
 
 /*-------------------------------------------------------------------------*/
diff --git a/drivers/usb/host/isp116x-hcd.c b/drivers/usb/host/isp116x-hcd.c
index 5c851a36de72..c27417f5b9d8 100644
--- a/drivers/usb/host/isp116x-hcd.c
+++ b/drivers/usb/host/isp116x-hcd.c
@@ -277,12 +277,11 @@ static void preproc_atl_queue(struct isp116x *isp116x)
   processed urbs.
 */
 static void finish_request(struct isp116x *isp116x, struct isp116x_ep *ep,
-                           struct urb *urb)
+                           struct urb *urb, int status)
 __releases(isp116x->lock) __acquires(isp116x->lock)
 {
         unsigned i;
 
-        urb->hcpriv = NULL;
         ep->error_count = 0;
 
         if (usb_pipecontrol(urb->pipe))
@@ -290,8 +289,9 @@ __releases(isp116x->lock) __acquires(isp116x->lock)
 
         urb_dbg(urb, "Finish");
 
+        usb_hcd_unlink_urb_from_ep(isp116x_to_hcd(isp116x), urb);
         spin_unlock(&isp116x->lock);
-        usb_hcd_giveback_urb(isp116x_to_hcd(isp116x), urb);
+        usb_hcd_giveback_urb(isp116x_to_hcd(isp116x), urb, status);
         spin_lock(&isp116x->lock);
 
         /* take idle endpoints out of the schedule */
@@ -445,12 +445,7 @@ static void postproc_atl_queue(struct isp116x *isp116x)
                         if (PTD_GET_ACTIVE(ptd)
                             || (cc != TD_CC_NOERROR && cc < 0x0E))
                                 break;
-                        if ((urb->transfer_flags & URB_SHORT_NOT_OK) &&
-                                        urb->actual_length <
-                                                urb->transfer_buffer_length)
-                                status = -EREMOTEIO;
-                        else
-                                status = 0;
+                        status = 0;
                         ep->nextpid = 0;
                         break;
                 default:
@@ -458,14 +453,8 @@ static void postproc_atl_queue(struct isp116x *isp116x)
                 }
 
  done:
-                if (status != -EINPROGRESS) {
-                        spin_lock(&urb->lock);
-                        if (urb->status == -EINPROGRESS)
-                                urb->status = status;
-                        spin_unlock(&urb->lock);
-                }
-                if (urb->status != -EINPROGRESS)
-                        finish_request(isp116x, ep, urb);
+                if (status != -EINPROGRESS || urb->unlinked)
+                        finish_request(isp116x, ep, urb, status);
         }
 }
 
@@ -673,7 +662,7 @@ static int balance(struct isp116x *isp116x, u16 period, u16 load)
 /*-----------------------------------------------------------------*/
 
 static int isp116x_urb_enqueue(struct usb_hcd *hcd,
-                               struct usb_host_endpoint *hep, struct urb *urb,
+                               struct urb *urb,
                                gfp_t mem_flags)
 {
         struct isp116x *isp116x = hcd_to_isp116x(hcd);
@@ -682,6 +671,7 @@ static int isp116x_urb_enqueue(struct usb_hcd *hcd,
         int is_out = !usb_pipein(pipe);
         int type = usb_pipetype(pipe);
         int epnum = usb_pipeendpoint(pipe);
+        struct usb_host_endpoint *hep = urb->ep;
         struct isp116x_ep *ep = NULL;
         unsigned long flags;
         int i;
@@ -705,7 +695,12 @@ static int isp116x_urb_enqueue(struct usb_hcd *hcd,
         if (!HC_IS_RUNNING(hcd->state)) {
                 kfree(ep);
                 ret = -ENODEV;
-                goto fail;
+                goto fail_not_linked;
+        }
+        ret = usb_hcd_link_urb_to_ep(hcd, urb);
+        if (ret) {
+                kfree(ep);
+                goto fail_not_linked;
         }
 
         if (hep->hcpriv)
@@ -808,16 +803,13 @@ static int isp116x_urb_enqueue(struct usb_hcd *hcd,
                 }
         }
 
-        /* in case of unlink-during-submit */
-        if (urb->status != -EINPROGRESS) {
-                finish_request(isp116x, ep, urb);
-                ret = 0;
-                goto fail;
-        }
         urb->hcpriv = hep;
         start_atl_transfers(isp116x);
 
       fail:
+        if (ret)
+                usb_hcd_unlink_urb_from_ep(hcd, urb);
+      fail_not_linked:
         spin_unlock_irqrestore(&isp116x->lock, flags);
         return ret;
 }
@@ -825,20 +817,21 @@ static int isp116x_urb_enqueue(struct usb_hcd *hcd,
 /*
    Dequeue URBs.
 */
-static int isp116x_urb_dequeue(struct usb_hcd *hcd, struct urb *urb)
+static int isp116x_urb_dequeue(struct usb_hcd *hcd, struct urb *urb,
+                int status)
 {
         struct isp116x *isp116x = hcd_to_isp116x(hcd);
         struct usb_host_endpoint *hep;
         struct isp116x_ep *ep, *ep_act;
         unsigned long flags;
+        int rc;
 
         spin_lock_irqsave(&isp116x->lock, flags);
+        rc = usb_hcd_check_unlink_urb(hcd, urb, status);
+        if (rc)
+                goto done;
+
         hep = urb->hcpriv;
-        /* URB already unlinked (or never linked)? */
-        if (!hep) {
-                spin_unlock_irqrestore(&isp116x->lock, flags);
-                return 0;
-        }
         ep = hep->hcpriv;
         WARN_ON(hep != ep->hep);
 
@@ -855,10 +848,10 @@ static int isp116x_urb_dequeue(struct usb_hcd *hcd, struct urb *urb)
                         }
 
         if (urb)
-                finish_request(isp116x, ep, urb);
-
+                finish_request(isp116x, ep, urb, status);
+ done:
         spin_unlock_irqrestore(&isp116x->lock, flags);
-        return 0;
+        return rc;
 }
 
 static void isp116x_endpoint_disable(struct usb_hcd *hcd,
diff --git a/drivers/usb/host/ohci-dbg.c b/drivers/usb/host/ohci-dbg.c
index 6f9e43e9a6ca..ebab5ce8f5ce 100644
--- a/drivers/usb/host/ohci-dbg.c
+++ b/drivers/usb/host/ohci-dbg.c
@@ -24,7 +24,7 @@
  * small: 0) header + data packets 1) just header
  */
 static void __maybe_unused
-urb_print (struct urb * urb, char * str, int small)
+urb_print(struct urb * urb, char * str, int small, int status)
 {
         unsigned int pipe= urb->pipe;
 
@@ -34,7 +34,7 @@ urb_print (struct urb * urb, char * str, int small)
         }
 
 #ifndef OHCI_VERBOSE_DEBUG
-        if (urb->status != 0)
+        if (status != 0)
 #endif
         dbg("%s %p dev=%d ep=%d%s-%s flags=%x len=%d/%d stat=%d",
                     str,
@@ -46,7 +46,7 @@ urb_print (struct urb * urb, char * str, int small)
                     urb->transfer_flags,
                     urb->actual_length,
                     urb->transfer_buffer_length,
-                    urb->status);
+                    status);
 
 #ifdef  OHCI_VERBOSE_DEBUG
         if (!small) {
@@ -66,7 +66,7 @@ urb_print (struct urb * urb, char * str, int small)
                                                 urb->transfer_buffer_length: urb->actual_length;
                         for (i = 0; i < 16 && i < len; i++)
                                 printk (" %02x", ((__u8 *) urb->transfer_buffer) [i]);
-                        printk ("%s stat:%d\n", i < len? "...": "", urb->status);
+                        printk ("%s stat:%d\n", i < len? "...": "", status);
                 }
         }
 #endif
@@ -74,7 +74,7 @@ urb_print (struct urb * urb, char * str, int small)
 
 #define ohci_dbg_sw(ohci, next, size, format, arg...) \
         do { \
-        if (next) { \
+        if (next != NULL) { \
                 unsigned s_len; \
                 s_len = scnprintf (*next, *size, format, ## arg ); \
                 *size -= s_len; *next += s_len; \
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index 6edf4097d2d2..240c7f507541 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -81,7 +81,6 @@ static void ohci_dump (struct ohci_hcd *ohci, int verbose);
 static int ohci_init (struct ohci_hcd *ohci);
 static void ohci_stop (struct usb_hcd *hcd);
 static int ohci_restart (struct ohci_hcd *ohci);
-static void ohci_quirk_nec_worker (struct work_struct *work);
 
 #include "ohci-hub.c"
 #include "ohci-dbg.c"
@@ -118,7 +117,6 @@ MODULE_PARM_DESC (no_handshake, "true (not default) disables BIOS handshake");
  */
 static int ohci_urb_enqueue (
         struct usb_hcd  *hcd,
-        struct usb_host_endpoint *ep,
         struct urb      *urb,
         gfp_t           mem_flags
 ) {
@@ -131,11 +129,11 @@ static int ohci_urb_enqueue (
         int             retval = 0;
 
 #ifdef OHCI_VERBOSE_DEBUG
-        urb_print (urb, "SUB", usb_pipein (pipe));
+        urb_print(urb, "SUB", usb_pipein(pipe), -EINPROGRESS);
 #endif
 
         /* every endpoint has a ed, locate and maybe (re)initialize it */
-        if (! (ed = ed_get (ohci, ep, urb->dev, pipe, urb->interval)))
+        if (! (ed = ed_get (ohci, urb->ep, urb->dev, pipe, urb->interval)))
                 return -ENOMEM;
 
         /* for the private part of the URB we need the number of TDs (size) */
@@ -200,22 +198,17 @@ static int ohci_urb_enqueue (
                 retval = -ENODEV;
                 goto fail;
         }
-
-        /* in case of unlink-during-submit */
-        spin_lock (&urb->lock);
-        if (urb->status != -EINPROGRESS) {
-                spin_unlock (&urb->lock);
-                urb->hcpriv = urb_priv;
-                finish_urb (ohci, urb);
-                retval = 0;
+        retval = usb_hcd_link_urb_to_ep(hcd, urb);
+        if (retval)
                 goto fail;
-        }
 
         /* schedule the ed if needed */
         if (ed->state == ED_IDLE) {
                 retval = ed_schedule (ohci, ed);
-                if (retval < 0)
-                        goto fail0;
+                if (retval < 0) {
+                        usb_hcd_unlink_urb_from_ep(hcd, urb);
+                        goto fail;
+                }
                 if (ed->type == PIPE_ISOCHRONOUS) {
                         u16     frame = ohci_frame_no(ohci);
 
@@ -239,8 +232,6 @@ static int ohci_urb_enqueue (
         urb->hcpriv = urb_priv;
         td_submit_urb (ohci, urb);
 
-fail0:
-        spin_unlock (&urb->lock);
 fail:
         if (retval)
                 urb_free_priv (ohci, urb_priv);
@@ -249,22 +240,26 @@ fail:
 }
 
 /*
- * decouple the URB from the HC queues (TDs, urb_priv); it's
- * already marked using urb->status.  reporting is always done
+ * decouple the URB from the HC queues (TDs, urb_priv).
+ * reporting is always done
  * asynchronously, and we might be dealing with an urb that's
  * partially transferred, or an ED with other urbs being unlinked.
  */
-static int ohci_urb_dequeue (struct usb_hcd *hcd, struct urb *urb)
+static int ohci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
 {
         struct ohci_hcd         *ohci = hcd_to_ohci (hcd);
         unsigned long           flags;
+        int                     rc;
 
 #ifdef OHCI_VERBOSE_DEBUG
-        urb_print (urb, "UNLINK", 1);
+        urb_print(urb, "UNLINK", 1, status);
 #endif
 
         spin_lock_irqsave (&ohci->lock, flags);
-        if (HC_IS_RUNNING(hcd->state)) {
+        rc = usb_hcd_check_unlink_urb(hcd, urb, status);
+        if (rc) {
+                ;       /* Do nothing */
+        } else if (HC_IS_RUNNING(hcd->state)) {
                 urb_priv_t  *urb_priv;
 
                 /* Unless an IRQ completed the unlink while it was being
@@ -282,10 +277,10 @@ static int ohci_urb_dequeue (struct usb_hcd *hcd, struct urb *urb)
                  * any more ... just clean up every urb's memory.
                  */
                 if (urb->hcpriv)
-                        finish_urb (ohci, urb);
+                        finish_urb(ohci, urb, status);
         }
         spin_unlock_irqrestore (&ohci->lock, flags);
-        return 0;
+        return rc;
 }
 
 /*-------------------------------------------------------------------------*/
@@ -314,6 +309,8 @@ rescan:
         if (!HC_IS_RUNNING (hcd->state)) {
 sanitize:
                 ed->state = ED_IDLE;
+                if (quirk_zfmicro(ohci) && ed->type == PIPE_INTERRUPT)
+                        ohci->eds_scheduled--;
                 finish_unlinks (ohci, 0);
         }
 
@@ -321,7 +318,12 @@ sanitize:
         case ED_UNLINK:         /* wait for hw to finish? */
                 /* major IRQ delivery trouble loses INTR_SF too... */
                 if (limit-- == 0) {
-                        ohci_warn (ohci, "IRQ INTR_SF lossage\n");
+                        ohci_warn(ohci, "ED unlink timeout\n");
+                        if (quirk_zfmicro(ohci)) {
+                                ohci_warn(ohci, "Attempting ZF TD recovery\n");
+                                ohci->ed_to_check = ed;
+                                ohci->zf_delay = 2;
+                        }
                         goto sanitize;
                 }
                 spin_unlock_irqrestore (&ohci->lock, flags);
@@ -379,6 +381,93 @@ ohci_shutdown (struct usb_hcd *hcd)
         (void) ohci_readl (ohci, &ohci->regs->control);
 }
 
+static int check_ed(struct ohci_hcd *ohci, struct ed *ed)
+{
+        return (hc32_to_cpu(ohci, ed->hwINFO) & ED_IN) != 0
+                && (hc32_to_cpu(ohci, ed->hwHeadP) & TD_MASK)
+                        == (hc32_to_cpu(ohci, ed->hwTailP) & TD_MASK)
+                && !list_empty(&ed->td_list);
+}
+
+/* ZF Micro watchdog timer callback. The ZF Micro chipset sometimes completes
+ * an interrupt TD but neglects to add it to the donelist.  On systems with
+ * this chipset, we need to periodically check the state of the queues to look
+ * for such "lost" TDs.
+ */
+static void unlink_watchdog_func(unsigned long _ohci)
+{
+        long            flags;
+        unsigned        max;
+        unsigned        seen_count = 0;
+        unsigned        i;
+        struct ed       **seen = NULL;
+        struct ohci_hcd *ohci = (struct ohci_hcd *) _ohci;
+
+        spin_lock_irqsave(&ohci->lock, flags);
+        max = ohci->eds_scheduled;
+        if (!max)
+                goto done;
+
+        if (ohci->ed_to_check)
+                goto out;
+
+        seen = kcalloc(max, sizeof *seen, GFP_ATOMIC);
+        if (!seen)
+                goto out;
+
+        for (i = 0; i < NUM_INTS; i++) {
+                struct ed       *ed = ohci->periodic[i];
+
+                while (ed) {
+                        unsigned        temp;
+
+                        /* scan this branch of the periodic schedule tree */
+                        for (temp = 0; temp < seen_count; temp++) {
+                                if (seen[temp] == ed) {
+                                        /* we've checked it and what's after */
+                                        ed = NULL;
+                                        break;
+                                }
+                        }
+                        if (!ed)
+                                break;
+                        seen[seen_count++] = ed;
+                        if (!check_ed(ohci, ed)) {
+                                ed = ed->ed_next;
+                                continue;
+                        }
+
+                        /* HC's TD list is empty, but HCD sees at least one
+                         * TD that's not been sent through the donelist.
+                         */
+                        ohci->ed_to_check = ed;
+                        ohci->zf_delay = 2;
+
+                        /* The HC may wait until the next frame to report the
+                         * TD as done through the donelist and INTR_WDH.  (We
+                         * just *assume* it's not a multi-TD interrupt URB;
+                         * those could defer the IRQ more than one frame, using
+                         * DI...)  Check again after the next INTR_SF.
+                         */
+                        ohci_writel(ohci, OHCI_INTR_SF,
+                                        &ohci->regs->intrstatus);
+                        ohci_writel(ohci, OHCI_INTR_SF,
+                                        &ohci->regs->intrenable);
+
+                        /* flush those writes */
+                        (void) ohci_readl(ohci, &ohci->regs->control);
+
+                        goto out;
+                }
+        }
+out:
+        kfree(seen);
+        if (ohci->eds_scheduled)
+                mod_timer(&ohci->unlink_watchdog, round_jiffies_relative(HZ));
+done:
+        spin_unlock_irqrestore(&ohci->lock, flags);
+}
+
 /*-------------------------------------------------------------------------*
  * HC functions
  *-------------------------------------------------------------------------*/
@@ -616,6 +705,15 @@ retry:
         mdelay ((temp >> 23) & 0x1fe);
         hcd->state = HC_STATE_RUNNING;
 
+        if (quirk_zfmicro(ohci)) {
+                /* Create timer to watch for bad queue state on ZF Micro */
+                setup_timer(&ohci->unlink_watchdog, unlink_watchdog_func,
+                                (unsigned long) ohci);
+
+                ohci->eds_scheduled = 0;
+                ohci->ed_to_check = NULL;
+        }
+
         ohci_dump (ohci, 1);
 
         return 0;
@@ -629,10 +727,11 @@ static irqreturn_t ohci_irq (struct usb_hcd *hcd)
 {
         struct ohci_hcd         *ohci = hcd_to_ohci (hcd);
         struct ohci_regs __iomem *regs = ohci->regs;
-        int                     ints; 
+        int                     ints;
 
         /* we can eliminate a (slow) ohci_readl()
-           if _only_ WDH caused this irq */
+         * if _only_ WDH caused this irq
+         */
         if ((ohci->hcca->done_head != 0)
                         && ! (hc32_to_cpup (ohci, &ohci->hcca->done_head)
                                 & 0x01)) {
@@ -651,7 +750,7 @@ static irqreturn_t ohci_irq (struct usb_hcd *hcd)
 
         if (ints & OHCI_INTR_UE) {
                 // e.g. due to PCI Master/Target Abort
-                if (ohci->flags & OHCI_QUIRK_NEC) {
+                if (quirk_nec(ohci)) {
                         /* Workaround for a silicon bug in some NEC chips used
                          * in Apple's PowerBooks. Adapted from Darwin code.
                          */
@@ -713,6 +812,31 @@ static irqreturn_t ohci_irq (struct usb_hcd *hcd)
                         ohci_writel (ohci, OHCI_INTR_WDH, &regs->intrenable);
         }
 
+        if (quirk_zfmicro(ohci) && (ints & OHCI_INTR_SF)) {
+                spin_lock(&ohci->lock);
+                if (ohci->ed_to_check) {
+                        struct ed *ed = ohci->ed_to_check;
+
+                        if (check_ed(ohci, ed)) {
+                                /* HC thinks the TD list is empty; HCD knows
+                                 * at least one TD is outstanding
+                                 */
+                                if (--ohci->zf_delay == 0) {
+                                        struct td *td = list_entry(
+                                                ed->td_list.next,
+                                                struct td, td_list);
+                                        ohci_warn(ohci,
+                                                  "Reclaiming orphan TD %p\n",
+                                                  td);
+                                        takeback_td(ohci, td);
+                                        ohci->ed_to_check = NULL;
+                                }
+                        } else
+                                ohci->ed_to_check = NULL;
+                }
+                spin_unlock(&ohci->lock);
+        }
+
         /* could track INTR_SO to reduce available PCI/... bandwidth */
 
         /* handle any pending URB/ED unlinks, leaving INTR_SF enabled
@@ -721,7 +845,9 @@ static irqreturn_t ohci_irq (struct usb_hcd *hcd)
         spin_lock (&ohci->lock);
         if (ohci->ed_rm_list)
                 finish_unlinks (ohci, ohci_frame_no(ohci));
-        if ((ints & OHCI_INTR_SF) != 0 && !ohci->ed_rm_list
+        if ((ints & OHCI_INTR_SF) != 0
+                        && !ohci->ed_rm_list
+                        && !ohci->ed_to_check
                         && HC_IS_RUNNING(hcd->state))
                 ohci_writel (ohci, OHCI_INTR_SF, &regs->intrdisable);
         spin_unlock (&ohci->lock);
@@ -751,6 +877,9 @@ static void ohci_stop (struct usb_hcd *hcd)
         free_irq(hcd->irq, hcd);
         hcd->irq = -1;
 
+        if (quirk_zfmicro(ohci))
+                del_timer(&ohci->unlink_watchdog);
+
         remove_debug_files (ohci);
         ohci_mem_cleanup (ohci);
         if (ohci->hcca) {
@@ -798,9 +927,8 @@ static int ohci_restart (struct ohci_hcd *ohci)
                                         ed, ed->state);
                 }
 
-                spin_lock (&urb->lock);
-                urb->status = -ESHUTDOWN;
-                spin_unlock (&urb->lock);
+                if (!urb->unlinked)
+                        urb->unlinked = -ESHUTDOWN;
         }
         finish_unlinks (ohci, 0);
         spin_unlock_irq(&ohci->lock);
@@ -828,27 +956,6 @@ static int ohci_restart (struct ohci_hcd *ohci)
 
 /*-------------------------------------------------------------------------*/
 
-/* NEC workaround */
-static void ohci_quirk_nec_worker(struct work_struct *work)
-{
-        struct ohci_hcd *ohci = container_of(work, struct ohci_hcd, nec_work);
-        int status;
-
-        status = ohci_init(ohci);
-        if (status != 0) {
-                ohci_err(ohci, "Restarting NEC controller failed "
-                         "in ohci_init, %d\n", status);
-                return;
-        }
-
-        status = ohci_restart(ohci);
-        if (status != 0)
-                ohci_err(ohci, "Restarting NEC controller failed "
-                         "in ohci_restart, %d\n", status);
-}
-
-/*-------------------------------------------------------------------------*/
-
 #define DRIVER_INFO DRIVER_VERSION " " DRIVER_DESC
 
 MODULE_AUTHOR (DRIVER_AUTHOR);
@@ -926,11 +1033,17 @@ MODULE_LICENSE ("GPL");
 #define PS3_SYSTEM_BUS_DRIVER   ps3_ohci_driver
 #endif
 
+#ifdef CONFIG_USB_OHCI_HCD_SSB
+#include "ohci-ssb.c"
+#define SSB_OHCI_DRIVER         ssb_ohci_driver
+#endif
+
 #if     !defined(PCI_DRIVER) &&         \
         !defined(PLATFORM_DRIVER) &&    \
         !defined(OF_PLATFORM_DRIVER) && \
         !defined(SA1111_DRIVER) &&      \
-        !defined(PS3_SYSTEM_BUS_DRIVER)
+        !defined(PS3_SYSTEM_BUS_DRIVER) && \
+        !defined(SSB_OHCI_DRIVER)
 #error "missing bus glue for ohci-hcd"
 #endif
 
@@ -975,10 +1088,20 @@ static int __init ohci_hcd_mod_init(void)
                 goto error_pci;
 #endif
 
+#ifdef SSB_OHCI_DRIVER
+        retval = ssb_driver_register(&SSB_OHCI_DRIVER);
+        if (retval)
+                goto error_ssb;
+#endif
+
         return retval;
 
         /* Error path */
+#ifdef SSB_OHCI_DRIVER
+ error_ssb:
+#endif
 #ifdef PCI_DRIVER
+        pci_unregister_driver(&PCI_DRIVER);
  error_pci:
 #endif
 #ifdef SA1111_DRIVER
@@ -1003,6 +1126,9 @@ module_init(ohci_hcd_mod_init);
 
 static void __exit ohci_hcd_mod_exit(void)
 {
+#ifdef SSB_OHCI_DRIVER
+        ssb_driver_unregister(&SSB_OHCI_DRIVER);
+#endif
 #ifdef PCI_DRIVER
         pci_unregister_driver(&PCI_DRIVER);
 #endif
diff --git a/drivers/usb/host/ohci-mem.c b/drivers/usb/host/ohci-mem.c
index 450c7b460c5a..2f20d3dc895b 100644
--- a/drivers/usb/host/ohci-mem.c
+++ b/drivers/usb/host/ohci-mem.c
@@ -28,7 +28,6 @@ static void ohci_hcd_init (struct ohci_hcd *ohci)
         ohci->next_statechange = jiffies;
         spin_lock_init (&ohci->lock);
         INIT_LIST_HEAD (&ohci->pending);
-        INIT_WORK (&ohci->nec_work, ohci_quirk_nec_worker);
 }
 
 /*-------------------------------------------------------------------------*/
diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c
index a5e2eb85d073..d0360f65ebd9 100644
--- a/drivers/usb/host/ohci-pci.c
+++ b/drivers/usb/host/ohci-pci.c
@@ -84,7 +84,7 @@ static int ohci_quirk_zfmicro(struct usb_hcd *hcd)
         struct ohci_hcd *ohci = hcd_to_ohci (hcd);
 
         ohci->flags |= OHCI_QUIRK_ZFMICRO;
-        ohci_dbg (ohci, "enabled Compaq ZFMicro chipset quirk\n");
+        ohci_dbg(ohci, "enabled Compaq ZFMicro chipset quirks\n");
 
         return 0;
 }
@@ -113,11 +113,31 @@ static int ohci_quirk_toshiba_scc(struct usb_hcd *hcd)
 
 /* Check for NEC chip and apply quirk for allegedly lost interrupts.
  */
+
+static void ohci_quirk_nec_worker(struct work_struct *work)
+{
+        struct ohci_hcd *ohci = container_of(work, struct ohci_hcd, nec_work);
+        int status;
+
+        status = ohci_init(ohci);
+        if (status != 0) {
+                ohci_err(ohci, "Restarting NEC controller failed in %s, %d\n",
+                         "ohci_init", status);
+                return;
+        }
+
+        status = ohci_restart(ohci);
+        if (status != 0)
+                ohci_err(ohci, "Restarting NEC controller failed in %s, %d\n",
+                         "ohci_restart", status);
+}
+
 static int ohci_quirk_nec(struct usb_hcd *hcd)
 {
         struct ohci_hcd *ohci = hcd_to_ohci (hcd);
 
         ohci->flags |= OHCI_QUIRK_NEC;
+        INIT_WORK(&ohci->nec_work, ohci_quirk_nec_worker);
         ohci_dbg (ohci, "enabled NEC chipset lost interrupt quirk\n");
 
         return 0;
diff --git a/drivers/usb/host/ohci-ppc-of.c b/drivers/usb/host/ohci-ppc-of.c
index c43b66acd4d5..0a7426920150 100644
--- a/drivers/usb/host/ohci-ppc-of.c
+++ b/drivers/usb/host/ohci-ppc-of.c
@@ -134,8 +134,11 @@ ohci_hcd_ppc_of_probe(struct of_device *op, const struct of_device_id *match)
         }
 
         ohci = hcd_to_ohci(hcd);
-        if (is_bigendian)
+        if (is_bigendian) {
                 ohci->flags |= OHCI_QUIRK_BE_MMIO | OHCI_QUIRK_BE_DESC;
+                if (of_device_is_compatible(dn, "mpc5200-ohci"))
+                        ohci->flags |= OHCI_QUIRK_FRAME_NO;
+        }
 
         ohci_hcd_init(ohci);
 
diff --git a/drivers/usb/host/ohci-ppc-soc.c b/drivers/usb/host/ohci-ppc-soc.c
index 1a2e1777ca61..f95be1896b0d 100644
--- a/drivers/usb/host/ohci-ppc-soc.c
+++ b/drivers/usb/host/ohci-ppc-soc.c
@@ -73,6 +73,11 @@ static int usb_hcd_ppc_soc_probe(const struct hc_driver *driver,
 
         ohci = hcd_to_ohci(hcd);
         ohci->flags |= OHCI_QUIRK_BE_MMIO | OHCI_QUIRK_BE_DESC;
+
+#ifdef CONFIG_PPC_MPC52xx
+        /* MPC52xx doesn't need frame_no shift */
+        ohci->flags |= OHCI_QUIRK_FRAME_NO;
+#endif
         ohci_hcd_init(ohci);
 
         retval = usb_add_hcd(hcd, irq, IRQF_DISABLED);
diff --git a/drivers/usb/host/ohci-q.c b/drivers/usb/host/ohci-q.c
index 830a3fe8615e..51817322232b 100644
--- a/drivers/usb/host/ohci-q.c
+++ b/drivers/usb/host/ohci-q.c
@@ -36,29 +36,15 @@ static void urb_free_priv (struct ohci_hcd *hc, urb_priv_t *urb_priv)
  * PRECONDITION:  ohci lock held, irqs blocked.
  */
 static void
-finish_urb (struct ohci_hcd *ohci, struct urb *urb)
+finish_urb(struct ohci_hcd *ohci, struct urb *urb, int status)
 __releases(ohci->lock)
 __acquires(ohci->lock)
 {
         // ASSERT (urb->hcpriv != 0);
 
         urb_free_priv (ohci, urb->hcpriv);
-        urb->hcpriv = NULL;
-
-        spin_lock (&urb->lock);
-        if (likely (urb->status == -EINPROGRESS))
-                urb->status = 0;
-        /* report short control reads right even though the data TD always
-         * has TD_R set.  (much simpler, but creates the 1-td limit.)
-         */
-        if (unlikely (urb->transfer_flags & URB_SHORT_NOT_OK)
-                        && unlikely (usb_pipecontrol (urb->pipe))
-                        && urb->actual_length < urb->transfer_buffer_length
-                        && usb_pipein (urb->pipe)
-                        && urb->status == 0) {
-                urb->status = -EREMOTEIO;
-        }
-        spin_unlock (&urb->lock);
+        if (likely(status == -EINPROGRESS))
+                status = 0;
 
         switch (usb_pipetype (urb->pipe)) {
         case PIPE_ISOCHRONOUS:
@@ -70,12 +56,13 @@ __acquires(ohci->lock)
         }
 
 #ifdef OHCI_VERBOSE_DEBUG
-        urb_print (urb, "RET", usb_pipeout (urb->pipe));
+        urb_print(urb, "RET", usb_pipeout (urb->pipe), status);
 #endif
 
         /* urb->complete() can reenter this HCD */
+        usb_hcd_unlink_urb_from_ep(ohci_to_hcd(ohci), urb);
         spin_unlock (&ohci->lock);
-        usb_hcd_giveback_urb (ohci_to_hcd(ohci), urb);
+        usb_hcd_giveback_urb(ohci_to_hcd(ohci), urb, status);
         spin_lock (&ohci->lock);
 
         /* stop periodic dma if it's not needed */
@@ -179,6 +166,10 @@ static int ed_schedule (struct ohci_hcd *ohci, struct ed *ed)
         ed->ed_prev = NULL;
         ed->ed_next = NULL;
         ed->hwNextED = 0;
+        if (quirk_zfmicro(ohci)
+                        && (ed->type == PIPE_INTERRUPT)
+                        && !(ohci->eds_scheduled++))
+                mod_timer(&ohci->unlink_watchdog, round_jiffies_relative(HZ));
         wmb ();
 
         /* we care about rm_list when setting CLE/BLE in case the HC was at
@@ -708,19 +699,18 @@ static void td_submit_urb (
  * Done List handling functions
  *-------------------------------------------------------------------------*/
 
-/* calculate transfer length/status and update the urb
- * PRECONDITION:  irqsafe (only for urb->status locking)
- */
-static void td_done (struct ohci_hcd *ohci, struct urb *urb, struct td *td)
+/* calculate transfer length/status and update the urb */
+static int td_done(struct ohci_hcd *ohci, struct urb *urb, struct td *td)
 {
         u32     tdINFO = hc32_to_cpup (ohci, &td->hwINFO);
         int     cc = 0;
+        int     status = -EINPROGRESS;
 
         list_del (&td->td_list);
 
         /* ISO ... drivers see per-TD length/status */
         if (tdINFO & TD_ISO) {
-                u16     tdPSW = ohci_hwPSW (ohci, td, 0);
+                u16     tdPSW = ohci_hwPSW(ohci, td, 0);
                 int     dlen = 0;
 
                 /* NOTE:  assumes FC in tdINFO == 0, and that
@@ -729,7 +719,7 @@ static void td_done (struct ohci_hcd *ohci, struct urb *urb, struct td *td)
 
                 cc = (tdPSW >> 12) & 0xF;
                 if (tdINFO & TD_CC)     /* hc didn't touch? */
-                        return;
+                        return status;
 
                 if (usb_pipeout (urb->pipe))
                         dlen = urb->iso_frame_desc [td->index].length;
@@ -762,12 +752,8 @@ static void td_done (struct ohci_hcd *ohci, struct urb *urb, struct td *td)
                 if (cc == TD_DATAUNDERRUN
                                 && !(urb->transfer_flags & URB_SHORT_NOT_OK))
                         cc = TD_CC_NOERROR;
-                if (cc != TD_CC_NOERROR && cc < 0x0E) {
-                        spin_lock (&urb->lock);
-                        if (urb->status == -EINPROGRESS)
-                                urb->status = cc_to_error [cc];
-                        spin_unlock (&urb->lock);
-                }
+                if (cc != TD_CC_NOERROR && cc < 0x0E)
+                        status = cc_to_error[cc];
 
                 /* count all non-empty packets except control SETUP packet */
                 if ((type != PIPE_CONTROL || td->index != 0) && tdBE != 0) {
@@ -786,14 +772,15 @@ static void td_done (struct ohci_hcd *ohci, struct urb *urb, struct td *td)
                                 urb->actual_length,
                                 urb->transfer_buffer_length);
         }
+        return status;
 }
 
 /*-------------------------------------------------------------------------*/
 
-static inline struct td *
-ed_halted (struct ohci_hcd *ohci, struct td *td, int cc, struct td *rev)
+static void ed_halted(struct ohci_hcd *ohci, struct td *td, int cc)
 {
         struct urb              *urb = td->urb;
+        urb_priv_t              *urb_priv = urb->hcpriv;
         struct ed               *ed = td->ed;
         struct list_head        *tmp = td->td_list.next;
         __hc32                  toggle = ed->hwHeadP & cpu_to_hc32 (ohci, ED_C);
@@ -805,13 +792,12 @@ ed_halted (struct ohci_hcd *ohci, struct td *td, int cc, struct td *rev)
         wmb ();
         ed->hwHeadP &= ~cpu_to_hc32 (ohci, ED_H);
 
-        /* put any later tds from this urb onto the donelist, after 'td',
-         * order won't matter here: no errors, and nothing was transferred.
-         * also patch the ed so it looks as if those tds completed normally.
+        /* Get rid of all later tds from this urb.  We don't have
+         * to be careful: no errors and nothing was transferred.
+         * Also patch the ed so it looks as if those tds completed normally.
          */
         while (tmp != &ed->td_list) {
                 struct td       *next;
-                __hc32          info;
 
                 next = list_entry (tmp, struct td, td_list);
                 tmp = next->td_list.next;
@@ -826,14 +812,9 @@ ed_halted (struct ohci_hcd *ohci, struct td *td, int cc, struct td *rev)
                  * then we need to leave the control STATUS packet queued
                  * and clear ED_SKIP.
                  */
-                info = next->hwINFO;
-                info |= cpu_to_hc32 (ohci, TD_DONE);
-                info &= ~cpu_to_hc32 (ohci, TD_CC);
-                next->hwINFO = info;
-
-                next->next_dl_td = rev;
-                rev = next;
 
+                list_del(&next->td_list);
+                urb_priv->td_cnt++;
                 ed->hwHeadP = next->hwNextTD | toggle;
         }
 
@@ -859,8 +840,6 @@ ed_halted (struct ohci_hcd *ohci, struct td *td, int cc, struct td *rev)
                         hc32_to_cpu (ohci, td->hwINFO),
                         cc, cc_to_error [cc]);
         }
-
-        return rev;
 }
 
 /* replies to the request have to be on a FIFO basis so
@@ -897,7 +876,7 @@ static struct td *dl_reverse_done_list (struct ohci_hcd *ohci)
                  */
                 if (cc != TD_CC_NOERROR
                                 && (td->ed->hwHeadP & cpu_to_hc32 (ohci, ED_H)))
-                        td_rev = ed_halted (ohci, td, cc, td_rev);
+                        ed_halted(ohci, td, cc);
 
                 td->next_dl_td = td_rev;
                 td_rev = td;
@@ -940,8 +919,12 @@ skip_ed:
                                                                 TD_MASK;
 
                                 /* INTR_WDH may need to clean up first */
-                                if (td->td_dma != head)
-                                        goto skip_ed;
+                                if (td->td_dma != head) {
+                                        if (ed == ohci->ed_to_check)
+                                                ohci->ed_to_check = NULL;
+                                        else
+                                                goto skip_ed;
+                                }
                         }
                 }
 
@@ -974,7 +957,7 @@ rescan_this:
                         urb = td->urb;
                         urb_priv = td->urb->hcpriv;
 
-                        if (urb->status == -EINPROGRESS) {
+                        if (!urb->unlinked) {
                                 prev = &td->hwNextTD;
                                 continue;
                         }
@@ -990,7 +973,7 @@ rescan_this:
                         /* if URB is done, clean up */
                         if (urb_priv->td_cnt == urb_priv->length) {
                                 modified = completed = 1;
-                                finish_urb (ohci, urb);
+                                finish_urb(ohci, urb, 0);
                         }
                 }
                 if (completed && !list_empty (&ed->td_list))
@@ -998,6 +981,8 @@ rescan_this:
 
                 /* ED's now officially unlinked, hc doesn't see */
                 ed->state = ED_IDLE;
+                if (quirk_zfmicro(ohci) && ed->type == PIPE_INTERRUPT)
+                        ohci->eds_scheduled--;
                 ed->hwHeadP &= ~cpu_to_hc32(ohci, ED_H);
                 ed->hwNextED = 0;
                 wmb ();
@@ -1021,7 +1006,7 @@ rescan_this:
 
                 if (ohci->ed_controltail) {
                         command |= OHCI_CLF;
-                        if (ohci->flags & OHCI_QUIRK_ZFMICRO)
+                        if (quirk_zfmicro(ohci))
                                 mdelay(1);
                         if (!(ohci->hc_control & OHCI_CTRL_CLE)) {
                                 control |= OHCI_CTRL_CLE;
@@ -1031,7 +1016,7 @@ rescan_this:
                 }
                 if (ohci->ed_bulktail) {
                         command |= OHCI_BLF;
-                        if (ohci->flags & OHCI_QUIRK_ZFMICRO)
+                        if (quirk_zfmicro(ohci))
                                 mdelay(1);
                         if (!(ohci->hc_control & OHCI_CTRL_BLE)) {
                                 control |= OHCI_CTRL_BLE;
@@ -1043,13 +1028,13 @@ rescan_this:
                 /* CLE/BLE to enable, CLF/BLF to (maybe) kickstart */
                 if (control) {
                         ohci->hc_control |= control;
-                        if (ohci->flags & OHCI_QUIRK_ZFMICRO)
+                        if (quirk_zfmicro(ohci))
                                 mdelay(1);
                         ohci_writel (ohci, ohci->hc_control,
                                         &ohci->regs->control);
                 }
                 if (command) {
-                        if (ohci->flags & OHCI_QUIRK_ZFMICRO)
+                        if (quirk_zfmicro(ohci))
                                 mdelay(1);
                         ohci_writel (ohci, command, &ohci->regs->cmdstatus);
                 }
@@ -1061,11 +1046,60 @@ rescan_this:
 /*-------------------------------------------------------------------------*/
 
 /*
+ * Used to take back a TD from the host controller. This would normally be
+ * called from within dl_done_list, however it may be called directly if the
+ * HC no longer sees the TD and it has not appeared on the donelist (after
+ * two frames).  This bug has been observed on ZF Micro systems.
+ */
+static void takeback_td(struct ohci_hcd *ohci, struct td *td)
+{
+        struct urb      *urb = td->urb;
+        urb_priv_t      *urb_priv = urb->hcpriv;
+        struct ed       *ed = td->ed;
+        int             status;
+
+        /* update URB's length and status from TD */
+        status = td_done(ohci, urb, td);
+        urb_priv->td_cnt++;
+
+        /* If all this urb's TDs are done, call complete() */
+        if (urb_priv->td_cnt == urb_priv->length)
+                finish_urb(ohci, urb, status);
+
+        /* clean schedule:  unlink EDs that are no longer busy */
+        if (list_empty(&ed->td_list)) {
+                if (ed->state == ED_OPER)
+                        start_ed_unlink(ohci, ed);
+
+        /* ... reenabling halted EDs only after fault cleanup */
+        } else if ((ed->hwINFO & cpu_to_hc32(ohci, ED_SKIP | ED_DEQUEUE))
+                        == cpu_to_hc32(ohci, ED_SKIP)) {
+                td = list_entry(ed->td_list.next, struct td, td_list);
+                if (!(td->hwINFO & cpu_to_hc32(ohci, TD_DONE))) {
+                        ed->hwINFO &= ~cpu_to_hc32(ohci, ED_SKIP);
+                        /* ... hc may need waking-up */
+                        switch (ed->type) {
+                        case PIPE_CONTROL:
+                                ohci_writel(ohci, OHCI_CLF,
+                                                &ohci->regs->cmdstatus);
+                                break;
+                        case PIPE_BULK:
+                                ohci_writel(ohci, OHCI_BLF,
+                                                &ohci->regs->cmdstatus);
+                                break;
+                        }
+                }
+        }
+}
+
+/*
  * Process normal completions (error or success) and clean the schedules.
  *
  * This is the main path for handing urbs back to drivers.  The only other
- * path is finish_unlinks(), which unlinks URBs using ed_rm_list, instead of
- * scanning the (re-reversed) donelist as this does.
+ * normal path is finish_unlinks(), which unlinks URBs using ed_rm_list,
+ * instead of scanning the (re-reversed) donelist as this does.  There's
+ * an abnormal path too, handling a quirk in some Compaq silicon:  URBs
+ * with TDs that appear to be orphaned are directly reclaimed.
  */
 static void
 dl_done_list (struct ohci_hcd *ohci)
@@ -1074,44 +1108,7 @@ dl_done_list (struct ohci_hcd *ohci)
 
         while (td) {
                 struct td       *td_next = td->next_dl_td;
-                struct urb      *urb = td->urb;
-                urb_priv_t      *urb_priv = urb->hcpriv;
-                struct ed       *ed = td->ed;
-
-                /* update URB's length and status from TD */
-                td_done (ohci, urb, td);
-                urb_priv->td_cnt++;
-
-                /* If all this urb's TDs are done, call complete() */
-                if (urb_priv->td_cnt == urb_priv->length)
-                        finish_urb (ohci, urb);
-
-                /* clean schedule:  unlink EDs that are no longer busy */
-                if (list_empty (&ed->td_list)) {
-                        if (ed->state == ED_OPER)
-                                start_ed_unlink (ohci, ed);
-
-                /* ... reenabling halted EDs only after fault cleanup */
-                } else if ((ed->hwINFO & cpu_to_hc32 (ohci,
-                                                ED_SKIP | ED_DEQUEUE))
-                                        == cpu_to_hc32 (ohci, ED_SKIP)) {
-                        td = list_entry (ed->td_list.next, struct td, td_list);
-                        if (!(td->hwINFO & cpu_to_hc32 (ohci, TD_DONE))) {
-                                ed->hwINFO &= ~cpu_to_hc32 (ohci, ED_SKIP);
-                                /* ... hc may need waking-up */
-                                switch (ed->type) {
-                                case PIPE_CONTROL:
-                                        ohci_writel (ohci, OHCI_CLF,
-                                                &ohci->regs->cmdstatus);
-                                        break;
-                                case PIPE_BULK:
-                                        ohci_writel (ohci, OHCI_BLF,
-                                                &ohci->regs->cmdstatus);
-                                        break;
-                                }
-                        }
-                }
-
+                takeback_td(ohci, td);
                 td = td_next;
         }
 }
diff --git a/drivers/usb/host/ohci-ssb.c b/drivers/usb/host/ohci-ssb.c
new file mode 100644
index 000000000000..fe70e72340de
--- /dev/null
+++ b/drivers/usb/host/ohci-ssb.c
@@ -0,0 +1,249 @@
+/*
+ * Sonics Silicon Backplane
+ * Broadcom USB-core OHCI driver
+ *
+ * Copyright 2007 Michael Buesch <mb@bu3sch.de>
+ *
+ * Derived from the OHCI-PCI driver
+ * Copyright 1999 Roman Weissgaerber
+ * Copyright 2000-2002 David Brownell
+ * Copyright 1999 Linus Torvalds
+ * Copyright 1999 Gregory P. Smith
+ *
+ * Derived from the USBcore related parts of Broadcom-SB
+ * Copyright 2005 Broadcom Corporation
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+#include <linux/ssb/ssb.h>
+
+
+#define SSB_OHCI_TMSLOW_HOSTMODE        (1 << 29)
+
+struct ssb_ohci_device {
+        struct ohci_hcd ohci; /* _must_ be at the beginning. */
+
+        u32 enable_flags;
+};
+
+static inline
+struct ssb_ohci_device *hcd_to_ssb_ohci(struct usb_hcd *hcd)
+{
+        return (struct ssb_ohci_device *)(hcd->hcd_priv);
+}
+
+
+static int ssb_ohci_reset(struct usb_hcd *hcd)
+{
+        struct ssb_ohci_device *ohcidev = hcd_to_ssb_ohci(hcd);
+        struct ohci_hcd *ohci = &ohcidev->ohci;
+        int err;
+
+        ohci_hcd_init(ohci);
+        err = ohci_init(ohci);
+
+        return err;
+}
+
+static int ssb_ohci_start(struct usb_hcd *hcd)
+{
+        struct ssb_ohci_device *ohcidev = hcd_to_ssb_ohci(hcd);
+        struct ohci_hcd *ohci = &ohcidev->ohci;
+        int err;
+
+        err = ohci_run(ohci);
+        if (err < 0) {
+                ohci_err(ohci, "can't start\n");
+                ohci_stop(hcd);
+        }
+
+        return err;
+}
+
+#ifdef CONFIG_PM
+static int ssb_ohci_hcd_suspend(struct usb_hcd *hcd, pm_message_t message)
+{
+        struct ssb_ohci_device *ohcidev = hcd_to_ssb_ohci(hcd);
+        struct ohci_hcd *ohci = &ohcidev->ohci;
+        unsigned long flags;
+
+        spin_lock_irqsave(&ohci->lock, flags);
+
+        ohci_writel(ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable);
+        ohci_readl(ohci, &ohci->regs->intrdisable); /* commit write */
+
+        /* make sure snapshot being resumed re-enumerates everything */
+        if (message.event == PM_EVENT_PRETHAW)
+                ohci_usb_reset(ohci);
+
+        clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+
+        spin_unlock_irqrestore(&ohci->lock, flags);
+        return 0;
+}
+
+static int ssb_ohci_hcd_resume(struct usb_hcd *hcd)
+{
+        set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+        usb_hcd_resume_root_hub(hcd);
+        return 0;
+}
+#endif /* CONFIG_PM */
+
+static const struct hc_driver ssb_ohci_hc_driver = {
+        .description            = "ssb-usb-ohci",
+        .product_desc           = "SSB OHCI Controller",
+        .hcd_priv_size          = sizeof(struct ssb_ohci_device),
+
+        .irq                    = ohci_irq,
+        .flags                  = HCD_MEMORY | HCD_USB11,
+
+        .reset                  = ssb_ohci_reset,
+        .start                  = ssb_ohci_start,
+        .stop                   = ohci_stop,
+        .shutdown               = ohci_shutdown,
+
+#ifdef CONFIG_PM
+        .suspend                = ssb_ohci_hcd_suspend,
+        .resume                 = ssb_ohci_hcd_resume,
+#endif
+
+        .urb_enqueue            = ohci_urb_enqueue,
+        .urb_dequeue            = ohci_urb_dequeue,
+        .endpoint_disable       = ohci_endpoint_disable,
+
+        .get_frame_number       = ohci_get_frame,
+
+        .hub_status_data        = ohci_hub_status_data,
+        .hub_control            = ohci_hub_control,
+        .hub_irq_enable         = ohci_rhsc_enable,
+#ifdef  CONFIG_PM
+        .bus_suspend            = ohci_bus_suspend,
+        .bus_resume             = ohci_bus_resume,
+#endif
+
+        .start_port_reset       = ohci_start_port_reset,
+};
+
+static void ssb_ohci_detach(struct ssb_device *dev)
+{
+        struct usb_hcd *hcd = ssb_get_drvdata(dev);
+
+        usb_remove_hcd(hcd);
+        iounmap(hcd->regs);
+        usb_put_hcd(hcd);
+        ssb_device_disable(dev, 0);
+}
+
+static int ssb_ohci_attach(struct ssb_device *dev)
+{
+        struct ssb_ohci_device *ohcidev;
+        struct usb_hcd *hcd;
+        int err = -ENOMEM;
+        u32 tmp, flags = 0;
+
+        if (dev->id.coreid == SSB_DEV_USB11_HOSTDEV)
+                flags |= SSB_OHCI_TMSLOW_HOSTMODE;
+
+        ssb_device_enable(dev, flags);
+
+        hcd = usb_create_hcd(&ssb_ohci_hc_driver, dev->dev,
+                        dev->dev->bus_id);
+        if (!hcd)
+                goto err_dev_disable;
+        ohcidev = hcd_to_ssb_ohci(hcd);
+        ohcidev->enable_flags = flags;
+
+        tmp = ssb_read32(dev, SSB_ADMATCH0);
+        hcd->rsrc_start = ssb_admatch_base(tmp);
+        hcd->rsrc_len = ssb_admatch_size(tmp);
+        hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len);
+        if (!hcd->regs)
+                goto err_put_hcd;
+        err = usb_add_hcd(hcd, dev->irq, IRQF_SHARED);
+        if (err)
+                goto err_iounmap;
+
+        ssb_set_drvdata(dev, hcd);
+
+        return err;
+
+err_iounmap:
+        iounmap(hcd->regs);
+err_put_hcd:
+        usb_put_hcd(hcd);
+err_dev_disable:
+        ssb_device_disable(dev, flags);
+        return err;
+}
+
+static int ssb_ohci_probe(struct ssb_device *dev,
+                const struct ssb_device_id *id)
+{
+        int err;
+        u16 chipid_top;
+
+        /* USBcores are only connected on embedded devices. */
+        chipid_top = (dev->bus->chip_id & 0xFF00);
+        if (chipid_top != 0x4700 && chipid_top != 0x5300)
+                return -ENODEV;
+
+        /* TODO: Probably need checks here; is the core connected? */
+
+        if (usb_disabled())
+                return -ENODEV;
+
+        /* We currently always attach SSB_DEV_USB11_HOSTDEV
+         * as HOST OHCI. If we want to attach it as Client device,
+         * we must branch here and call into the (yet to
+         * be written) Client mode driver. Same for remove(). */
+
+        err = ssb_ohci_attach(dev);
+
+        return err;
+}
+
+static void ssb_ohci_remove(struct ssb_device *dev)
+{
+        ssb_ohci_detach(dev);
+}
+
+#ifdef CONFIG_PM
+
+static int ssb_ohci_suspend(struct ssb_device *dev, pm_message_t state)
+{
+        ssb_device_disable(dev, 0);
+
+        return 0;
+}
+
+static int ssb_ohci_resume(struct ssb_device *dev)
+{
+        struct usb_hcd *hcd = ssb_get_drvdata(dev);
+        struct ssb_ohci_device *ohcidev = hcd_to_ssb_ohci(hcd);
+
+        ssb_device_enable(dev, ohcidev->enable_flags);
+
+        return 0;
+}
+
+#else /* !CONFIG_PM */
+#define ssb_ohci_suspend        NULL
+#define ssb_ohci_resume NULL
+#endif /* CONFIG_PM */
+
+static const struct ssb_device_id ssb_ohci_table[] = {
+        SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOSTDEV, SSB_ANY_REV),
+        SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOST, SSB_ANY_REV),
+        SSB_DEVTABLE_END
+};
+MODULE_DEVICE_TABLE(ssb, ssb_ohci_table);
+
+static struct ssb_driver ssb_ohci_driver = {
+        .name           = KBUILD_MODNAME,
+        .id_table       = ssb_ohci_table,
+        .probe          = ssb_ohci_probe,
+        .remove         = ssb_ohci_remove,
+        .suspend        = ssb_ohci_suspend,
+        .resume         = ssb_ohci_resume,
+};
diff --git a/drivers/usb/host/ohci.h b/drivers/usb/host/ohci.h
index 4ada43cf1387..47c5c66a282c 100644
--- a/drivers/usb/host/ohci.h
+++ b/drivers/usb/host/ohci.h
@@ -398,11 +398,38 @@ struct ohci_hcd {
 #define OHCI_QUIRK_BE_MMIO      0x10                    /* BE registers */
 #define OHCI_QUIRK_ZFMICRO      0x20                    /* Compaq ZFMicro chipset*/
 #define OHCI_QUIRK_NEC          0x40                    /* lost interrupts */
+#define OHCI_QUIRK_FRAME_NO     0x80                    /* no big endian frame_no shift */
         // there are also chip quirks/bugs in init logic
 
         struct work_struct      nec_work;       /* Worker for NEC quirk */
+
+        /* Needed for ZF Micro quirk */
+        struct timer_list       unlink_watchdog;
+        unsigned                eds_scheduled;
+        struct ed               *ed_to_check;
+        unsigned                zf_delay;
 };
 
+#ifdef CONFIG_PCI
+static inline int quirk_nec(struct ohci_hcd *ohci)
+{
+        return ohci->flags & OHCI_QUIRK_NEC;
+}
+static inline int quirk_zfmicro(struct ohci_hcd *ohci)
+{
+        return ohci->flags & OHCI_QUIRK_ZFMICRO;
+}
+#else
+static inline int quirk_nec(struct ohci_hcd *ohci)
+{
+        return 0;
+}
+static inline int quirk_zfmicro(struct ohci_hcd *ohci)
+{
+        return 0;
+}
+#endif
+
 /* convert between an hcd pointer and the corresponding ohci_hcd */
 static inline struct ohci_hcd *hcd_to_ohci (struct usb_hcd *hcd)
 {
@@ -607,15 +634,12 @@ static inline u32 hc32_to_cpup (const struct ohci_hcd *ohci, const __hc32 *x)
 /* HCCA frame number is 16 bits, but is accessed as 32 bits since not all
  * hardware handles 16 bit reads.  That creates a different confusion on
  * some big-endian SOC implementations.  Same thing happens with PSW access.
- *
- * FIXME: Deal with that as a runtime quirk when STB03xxx is ported over
- * to arch/powerpc
  */
 
-#ifdef CONFIG_STB03xxx
-#define OHCI_BE_FRAME_NO_SHIFT  16
+#ifdef CONFIG_PPC_MPC52xx
+#define big_endian_frame_no_quirk(ohci) (ohci->flags & OHCI_QUIRK_FRAME_NO)
 #else
-#define OHCI_BE_FRAME_NO_SHIFT  0
+#define big_endian_frame_no_quirk(ohci) 0
 #endif
 
 static inline u16 ohci_frame_no(const struct ohci_hcd *ohci)
@@ -623,7 +647,8 @@ static inline u16 ohci_frame_no(const struct ohci_hcd *ohci)
         u32 tmp;
         if (big_endian_desc(ohci)) {
                 tmp = be32_to_cpup((__force __be32 *)&ohci->hcca->frame_no);
-                tmp >>= OHCI_BE_FRAME_NO_SHIFT;
+                if (!big_endian_frame_no_quirk(ohci))
+                        tmp >>= 16;
         } else
                 tmp = le32_to_cpup((__force __le32 *)&ohci->hcca->frame_no);
 
diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c
index d60f1985320c..ae8ec4474eb8 100644
--- a/drivers/usb/host/r8a66597-hcd.c
+++ b/drivers/usb/host/r8a66597-hcd.c
@@ -782,10 +782,12 @@ static void force_dequeue(struct r8a66597 *r8a66597, u16 pipenum, u16 address)
                 kfree(td);
 
                 if (urb) {
-                        urb->status = -ENODEV;
-                        urb->hcpriv = NULL;
+                        usb_hcd_unlink_urb_from_ep(r8a66597_to_hcd(r8a66597),
+                                        urb);
+
                         spin_unlock(&r8a66597->lock);
-                        usb_hcd_giveback_urb(r8a66597_to_hcd(r8a66597), urb);
+                        usb_hcd_giveback_urb(r8a66597_to_hcd(r8a66597), urb,
+                                        -ENODEV);
                         spin_lock(&r8a66597->lock);
                 }
                 break;
@@ -832,7 +834,7 @@ static void init_pipe_info(struct r8a66597 *r8a66597, struct urb *urb,
         info.pipenum = get_empty_pipenum(r8a66597, ep);
         info.address = get_urb_to_r8a66597_addr(r8a66597, urb);
         info.epnum = ep->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK;
-        info.maxpacket = ep->wMaxPacketSize;
+        info.maxpacket = le16_to_cpu(ep->wMaxPacketSize);
         info.type = get_r8a66597_type(ep->bmAttributes
                                       & USB_ENDPOINT_XFERTYPE_MASK);
         info.bufnum = get_bufnum(info.pipenum);
@@ -923,7 +925,7 @@ static void prepare_setup_packet(struct r8a66597 *r8a66597,
         r8a66597_write(r8a66597, ~(SIGN | SACK), INTSTS1);
 
         for (i = 0; i < 4; i++) {
-                r8a66597_write(r8a66597, p[i], setup_addr);
+                r8a66597_write(r8a66597, cpu_to_le16(p[i]), setup_addr);
                 setup_addr += 2;
         }
         r8a66597_write(r8a66597, SUREQ, DCPCTR);
@@ -1032,6 +1034,15 @@ static void prepare_status_packet(struct r8a66597 *r8a66597,
         pipe_start(r8a66597, td->pipe);
 }
 
+static int is_set_address(unsigned char *setup_packet)
+{
+        if (((setup_packet[0] & USB_TYPE_MASK) == USB_TYPE_STANDARD) &&
+                        setup_packet[1] == USB_REQ_SET_ADDRESS)
+                return 1;
+        else
+                return 0;
+}
+
 /* this function must be called with interrupt disabled */
 static int start_transfer(struct r8a66597 *r8a66597, struct r8a66597_td *td)
 {
@@ -1039,7 +1050,7 @@ static int start_transfer(struct r8a66597 *r8a66597, struct r8a66597_td *td)
 
         switch (td->type) {
         case USB_PID_SETUP:
-                if (td->urb->setup_packet[1] == USB_REQ_SET_ADDRESS) {
+                if (is_set_address(td->urb->setup_packet)) {
                         td->set_address = 1;
                         td->urb->setup_packet[2] = alloc_usb_address(r8a66597,
                                                                      td->urb);
@@ -1106,8 +1117,9 @@ static void set_td_timer(struct r8a66597 *r8a66597, struct r8a66597_td *td)
 }
 
 /* this function must be called with interrupt disabled */
-static void done(struct r8a66597 *r8a66597, struct r8a66597_td *td,
-                 u16 pipenum, struct urb *urb)
+static void finish_request(struct r8a66597 *r8a66597, struct r8a66597_td *td,
+                u16 pipenum, struct urb *urb, int status)
+__releases(r8a66597->lock) __acquires(r8a66597->lock)
 {
         int restart = 0;
         struct usb_hcd *hcd = r8a66597_to_hcd(r8a66597);
@@ -1115,7 +1127,7 @@ static void done(struct r8a66597 *r8a66597, struct r8a66597_td *td,
         r8a66597->timeout_map &= ~(1 << pipenum);
 
         if (likely(td)) {
-                if (td->set_address && urb->status != 0)
+                if (td->set_address && (status != 0 || urb->unlinked))
                         r8a66597->address_map &= ~(1 << urb->setup_packet[2]);
 
                 pipe_toggle_save(r8a66597, td->pipe, urb);
@@ -1130,9 +1142,9 @@ static void done(struct r8a66597 *r8a66597, struct r8a66597_td *td,
                 if (usb_pipeisoc(urb->pipe))
                         urb->start_frame = r8a66597_get_frame(hcd);
 
-                urb->hcpriv = NULL;
+                usb_hcd_unlink_urb_from_ep(r8a66597_to_hcd(r8a66597), urb);
                 spin_unlock(&r8a66597->lock);
-                usb_hcd_giveback_urb(hcd, urb);
+                usb_hcd_giveback_urb(hcd, urb, status);
                 spin_lock(&r8a66597->lock);
         }
 
@@ -1146,14 +1158,6 @@ static void done(struct r8a66597 *r8a66597, struct r8a66597_td *td,
         }
 }
 
-/* this function must be called with interrupt disabled */
-static void finish_request(struct r8a66597 *r8a66597, struct r8a66597_td *td,
-                           u16 pipenum, struct urb *urb)
-__releases(r8a66597->lock) __acquires(r8a66597->lock)
-{
-        done(r8a66597, td, pipenum, urb);
-}
-
 static void packet_read(struct r8a66597 *r8a66597, u16 pipenum)
 {
         u16 tmp;
@@ -1162,6 +1166,7 @@ static void packet_read(struct r8a66597 *r8a66597, u16 pipenum)
         struct r8a66597_td *td = r8a66597_get_td(r8a66597, pipenum);
         struct urb *urb;
         int finish = 0;
+        int status = 0;
 
         if (unlikely(!td))
                 return;
@@ -1170,17 +1175,15 @@ static void packet_read(struct r8a66597 *r8a66597, u16 pipenum)
         fifo_change_from_pipe(r8a66597, td->pipe);
         tmp = r8a66597_read(r8a66597, td->pipe->fifoctr);
         if (unlikely((tmp & FRDY) == 0)) {
-                urb->status = -EPIPE;
                 pipe_stop(r8a66597, td->pipe);
                 pipe_irq_disable(r8a66597, pipenum);
                 err("in fifo not ready (%d)", pipenum);
-                finish_request(r8a66597, td, pipenum, td->urb);
+                finish_request(r8a66597, td, pipenum, td->urb, -EPIPE);
                 return;
         }
 
         /* prepare parameters */
         rcv_len = tmp & DTLN;
-        bufsize = td->maxpacket;
         if (usb_pipeisoc(urb->pipe)) {
                 buf = (u16 *)(urb->transfer_buffer +
                                 urb->iso_frame_desc[td->iso_cnt].offset);
@@ -1189,29 +1192,31 @@ static void packet_read(struct r8a66597 *r8a66597, u16 pipenum)
                 buf = (void *)urb->transfer_buffer + urb->actual_length;
                 urb_len = urb->transfer_buffer_length - urb->actual_length;
         }
-        if (rcv_len < bufsize)
-                size = min(rcv_len, urb_len);
-        else
-                size = min(bufsize, urb_len);
+        bufsize = min(urb_len, (int) td->maxpacket);
+        if (rcv_len <= bufsize) {
+                size = rcv_len;
+        } else {
+                size = bufsize;
+                status = -EOVERFLOW;
+                finish = 1;
+        }
 
         /* update parameters */
         urb->actual_length += size;
         if (rcv_len == 0)
                 td->zero_packet = 1;
-        if ((size % td->maxpacket) > 0) {
+        if (rcv_len < bufsize) {
                 td->short_packet = 1;
-                if (urb->transfer_buffer_length != urb->actual_length &&
-                    urb->transfer_flags & URB_SHORT_NOT_OK)
-                        td->urb->status = -EREMOTEIO;
         }
         if (usb_pipeisoc(urb->pipe)) {
                 urb->iso_frame_desc[td->iso_cnt].actual_length = size;
-                urb->iso_frame_desc[td->iso_cnt].status = 0;
+                urb->iso_frame_desc[td->iso_cnt].status = status;
                 td->iso_cnt++;
+                finish = 0;
         }
 
         /* check transfer finish */
-        if (check_transfer_finish(td, urb)) {
+        if (finish || check_transfer_finish(td, urb)) {
                 pipe_stop(r8a66597, td->pipe);
                 pipe_irq_disable(r8a66597, pipenum);
                 finish = 1;
@@ -1226,11 +1231,8 @@ static void packet_read(struct r8a66597 *r8a66597, u16 pipenum)
                                            buf, size);
         }
 
-        if (finish && pipenum != 0) {
-                if (td->urb->status == -EINPROGRESS)
-                        td->urb->status = 0;
-                finish_request(r8a66597, td, pipenum, urb);
-        }
+        if (finish && pipenum != 0)
+                finish_request(r8a66597, td, pipenum, urb, status);
 }
 
 static void packet_write(struct r8a66597 *r8a66597, u16 pipenum)
@@ -1248,11 +1250,10 @@ static void packet_write(struct r8a66597 *r8a66597, u16 pipenum)
         fifo_change_from_pipe(r8a66597, td->pipe);
         tmp = r8a66597_read(r8a66597, td->pipe->fifoctr);
         if (unlikely((tmp & FRDY) == 0)) {
-                urb->status = -EPIPE;
                 pipe_stop(r8a66597, td->pipe);
                 pipe_irq_disable(r8a66597, pipenum);
                 err("out write fifo not ready. (%d)", pipenum);
-                finish_request(r8a66597, td, pipenum, td->urb);
+                finish_request(r8a66597, td, pipenum, urb, -EPIPE);
                 return;
         }
 
@@ -1297,7 +1298,7 @@ static void packet_write(struct r8a66597 *r8a66597, u16 pipenum)
 }
 
 
-static void check_next_phase(struct r8a66597 *r8a66597)
+static void check_next_phase(struct r8a66597 *r8a66597, int status)
 {
         struct r8a66597_td *td = r8a66597_get_td(r8a66597, 0);
         struct urb *urb;
@@ -1310,49 +1311,41 @@ static void check_next_phase(struct r8a66597 *r8a66597)
         switch (td->type) {
         case USB_PID_IN:
         case USB_PID_OUT:
-                if (urb->status != -EINPROGRESS) {
-                        finish = 1;
-                        break;
-                }
                 if (check_transfer_finish(td, urb))
                         td->type = USB_PID_ACK;
                 break;
         case USB_PID_SETUP:
-                if (urb->status != -EINPROGRESS)
-                        finish = 1;
-                else if (urb->transfer_buffer_length == urb->actual_length) {
+                if (urb->transfer_buffer_length == urb->actual_length)
                         td->type = USB_PID_ACK;
-                        urb->status = 0;
-                } else if (usb_pipeout(urb->pipe))
+                else if (usb_pipeout(urb->pipe))
                         td->type = USB_PID_OUT;
                 else
                         td->type = USB_PID_IN;
                 break;
         case USB_PID_ACK:
                 finish = 1;
-                if (urb->status == -EINPROGRESS)
-                        urb->status = 0;
                 break;
         }
 
-        if (finish)
-                finish_request(r8a66597, td, 0, urb);
+        if (finish || status != 0 || urb->unlinked)
+                finish_request(r8a66597, td, 0, urb, status);
         else
                 start_transfer(r8a66597, td);
 }
 
-static void set_urb_error(struct r8a66597 *r8a66597, u16 pipenum)
+static int get_urb_error(struct r8a66597 *r8a66597, u16 pipenum)
 {
         struct r8a66597_td *td = r8a66597_get_td(r8a66597, pipenum);
 
-        if (td && td->urb) {
+        if (td) {
                 u16 pid = r8a66597_read(r8a66597, td->pipe->pipectr) & PID;
 
                 if (pid == PID_NAK)
-                        td->urb->status = -ECONNRESET;
+                        return -ECONNRESET;
                 else
-                        td->urb->status = -EPIPE;
+                        return -EPIPE;
         }
+        return 0;
 }
 
 static void irq_pipe_ready(struct r8a66597 *r8a66597)
@@ -1371,7 +1364,7 @@ static void irq_pipe_ready(struct r8a66597 *r8a66597)
                         packet_read(r8a66597, 0);
                 else
                         pipe_irq_disable(r8a66597, 0);
-                check_next_phase(r8a66597);
+                check_next_phase(r8a66597, 0);
         }
 
         for (pipenum = 1; pipenum < R8A66597_MAX_NUM_PIPE; pipenum++) {
@@ -1405,7 +1398,7 @@ static void irq_pipe_empty(struct r8a66597 *r8a66597)
                 td = r8a66597_get_td(r8a66597, 0);
                 if (td && td->type != USB_PID_OUT)
                         disable_irq_empty(r8a66597, 0);
-                check_next_phase(r8a66597);
+                check_next_phase(r8a66597, 0);
         }
 
         for (pipenum = 1; pipenum < R8A66597_MAX_NUM_PIPE; pipenum++) {
@@ -1420,9 +1413,8 @@ static void irq_pipe_empty(struct r8a66597 *r8a66597)
                         if ((tmp & INBUFM) == 0) {
                                 disable_irq_empty(r8a66597, pipenum);
                                 pipe_irq_disable(r8a66597, pipenum);
-                                if (td->urb->status == -EINPROGRESS)
-                                        td->urb->status = 0;
-                                finish_request(r8a66597, td, pipenum, td->urb);
+                                finish_request(r8a66597, td, pipenum, td->urb,
+                                                0);
                         }
                 }
         }
@@ -1433,15 +1425,16 @@ static void irq_pipe_nrdy(struct r8a66597 *r8a66597)
         u16 check;
         u16 pipenum;
         u16 mask;
+        int status;
 
         mask = r8a66597_read(r8a66597, NRDYSTS)
                & r8a66597_read(r8a66597, NRDYENB);
         r8a66597_write(r8a66597, ~mask, NRDYSTS);
         if (mask & NRDY0) {
                 cfifo_change(r8a66597, 0);
-                set_urb_error(r8a66597, 0);
+                status = get_urb_error(r8a66597, 0);
                 pipe_irq_disable(r8a66597, 0);
-                check_next_phase(r8a66597);
+                check_next_phase(r8a66597, status);
         }
 
         for (pipenum = 1; pipenum < R8A66597_MAX_NUM_PIPE; pipenum++) {
@@ -1452,10 +1445,10 @@ static void irq_pipe_nrdy(struct r8a66597 *r8a66597)
                         if (unlikely(!td))
                                 continue;
 
-                        set_urb_error(r8a66597, pipenum);
+                        status = get_urb_error(r8a66597, pipenum);
                         pipe_irq_disable(r8a66597, pipenum);
                         pipe_stop(r8a66597, td->pipe);
-                        finish_request(r8a66597, td, pipenum, td->urb);
+                        finish_request(r8a66597, td, pipenum, td->urb, status);
                 }
         }
 }
@@ -1475,6 +1468,7 @@ static irqreturn_t r8a66597_irq(struct usb_hcd *hcd)
         u16 intsts0, intsts1, intsts2;
         u16 intenb0, intenb1, intenb2;
         u16 mask0, mask1, mask2;
+        int status;
 
         spin_lock(&r8a66597->lock);
 
@@ -1518,12 +1512,12 @@ static irqreturn_t r8a66597_irq(struct usb_hcd *hcd)
                 }
                 if (mask1 & SIGN) {
                         r8a66597_write(r8a66597, ~SIGN, INTSTS1);
-                        set_urb_error(r8a66597, 0);
-                        check_next_phase(r8a66597);
+                        status = get_urb_error(r8a66597, 0);
+                        check_next_phase(r8a66597, status);
                 }
                 if (mask1 & SACK) {
                         r8a66597_write(r8a66597, ~SACK, INTSTS1);
-                        check_next_phase(r8a66597);
+                        check_next_phase(r8a66597, 0);
                 }
         }
         if (mask0) {
@@ -1722,21 +1716,25 @@ static struct r8a66597_td *r8a66597_make_td(struct r8a66597 *r8a66597,
 }
 
 static int r8a66597_urb_enqueue(struct usb_hcd *hcd,
-                                struct usb_host_endpoint *hep,
                                 struct urb *urb,
                                 gfp_t mem_flags)
 {
+        struct usb_host_endpoint *hep = urb->ep;
         struct r8a66597 *r8a66597 = hcd_to_r8a66597(hcd);
         struct r8a66597_td *td = NULL;
-        int ret = 0, request = 0;
+        int ret, request = 0;
         unsigned long flags;
 
         spin_lock_irqsave(&r8a66597->lock, flags);
         if (!get_urb_to_r8a66597_dev(r8a66597, urb)) {
                 ret = -ENODEV;
-                goto error;
+                goto error_not_linked;
         }
 
+        ret = usb_hcd_link_urb_to_ep(hcd, urb);
+        if (ret)
+                goto error_not_linked;
+
         if (!hep->hcpriv) {
                 hep->hcpriv = kzalloc(sizeof(struct r8a66597_pipe),
                                 GFP_ATOMIC);
@@ -1761,15 +1759,7 @@ static int r8a66597_urb_enqueue(struct usb_hcd *hcd,
         if (list_empty(&r8a66597->pipe_queue[td->pipenum]))
                 request = 1;
         list_add_tail(&td->queue, &r8a66597->pipe_queue[td->pipenum]);
-
-        spin_lock(&urb->lock);
-        if (urb->status != -EINPROGRESS) {
-                spin_unlock(&urb->lock);
-                ret = -EPIPE;
-                goto error;
-        }
         urb->hcpriv = td;
-        spin_unlock(&urb->lock);
 
         if (request) {
                 ret = start_transfer(r8a66597, td);
@@ -1781,26 +1771,36 @@ static int r8a66597_urb_enqueue(struct usb_hcd *hcd,
                 set_td_timer(r8a66597, td);
 
 error:
+        if (ret)
+                usb_hcd_unlink_urb_from_ep(hcd, urb);
+error_not_linked:
         spin_unlock_irqrestore(&r8a66597->lock, flags);
         return ret;
 }
 
-static int r8a66597_urb_dequeue(struct usb_hcd *hcd, struct urb *urb)
+static int r8a66597_urb_dequeue(struct usb_hcd *hcd, struct urb *urb,
+                int status)
 {
         struct r8a66597 *r8a66597 = hcd_to_r8a66597(hcd);
         struct r8a66597_td *td;
         unsigned long flags;
+        int rc;
 
         spin_lock_irqsave(&r8a66597->lock, flags);
+        rc = usb_hcd_check_unlink_urb(hcd, urb, status);
+        if (rc)
+                goto done;
+
         if (urb->hcpriv) {
                 td = urb->hcpriv;
                 pipe_stop(r8a66597, td->pipe);
                 pipe_irq_disable(r8a66597, td->pipenum);
                 disable_irq_empty(r8a66597, td->pipenum);
-                done(r8a66597, td, td->pipenum, urb);
+                finish_request(r8a66597, td, td->pipenum, urb, status);
         }
+ done:
         spin_unlock_irqrestore(&r8a66597->lock, flags);
-        return 0;
+        return rc;
 }
 
 static void r8a66597_endpoint_disable(struct usb_hcd *hcd,
@@ -1830,7 +1830,7 @@ static void r8a66597_endpoint_disable(struct usb_hcd *hcd,
         td = r8a66597_get_td(r8a66597, pipenum);
         if (td)
                 urb = td->urb;
-        done(r8a66597, td, pipenum, urb);
+        finish_request(r8a66597, td, pipenum, urb, -ESHUTDOWN);
         kfree(hep->hcpriv);
         hep->hcpriv = NULL;
         spin_unlock_irqrestore(&r8a66597->lock, flags);
@@ -2027,7 +2027,7 @@ static int r8a66597_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
         case GetPortStatus:
                 if (wIndex > R8A66597_MAX_ROOT_HUB)
                         goto error;
-                *(u32 *)buf = rh->port;
+                *(u32 *)buf = cpu_to_le32(rh->port);
                 break;
         case SetPortFeature:
                 if (wIndex > R8A66597_MAX_ROOT_HUB)
@@ -2126,8 +2126,8 @@ static int __init_or_module r8a66597_remove(struct platform_device *pdev)
         struct usb_hcd          *hcd = r8a66597_to_hcd(r8a66597);
 
         del_timer_sync(&r8a66597->rh_timer);
-        iounmap((void *)r8a66597->reg);
         usb_remove_hcd(hcd);
+        iounmap((void *)r8a66597->reg);
         usb_put_hcd(hcd);
         return 0;
 }
@@ -2208,8 +2208,6 @@ static int __init r8a66597_probe(struct platform_device *pdev)
 clean_up:
         if (reg)
                 iounmap(reg);
-        if (res)
-                release_mem_region(res->start, 1);
 
         return ret;
 }
diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c
index 4cfa3ff2c993..94d859aa73f8 100644
--- a/drivers/usb/host/sl811-hcd.c
+++ b/drivers/usb/host/sl811-hcd.c
@@ -435,14 +435,9 @@ static void finish_request(
         if (usb_pipecontrol(urb->pipe))
                 ep->nextpid = USB_PID_SETUP;
 
-        spin_lock(&urb->lock);
-        if (urb->status == -EINPROGRESS)
-                urb->status = status;
-        urb->hcpriv = NULL;
-        spin_unlock(&urb->lock);
-
+        usb_hcd_unlink_urb_from_ep(sl811_to_hcd(sl811), urb);
         spin_unlock(&sl811->lock);
-        usb_hcd_giveback_urb(sl811_to_hcd(sl811), urb);
+        usb_hcd_giveback_urb(sl811_to_hcd(sl811), urb, status);
         spin_lock(&sl811->lock);
 
         /* leave active endpoints in the schedule */
@@ -538,35 +533,21 @@ done(struct sl811 *sl811, struct sl811h_ep *ep, u8 bank)
                                                 bank + SL11H_XFERCNTREG);
                         if (len > ep->length) {
                                 len = ep->length;
-                                urb->status = -EOVERFLOW;
+                                urbstat = -EOVERFLOW;
                         }
                         urb->actual_length += len;
                         sl811_read_buf(sl811, SL811HS_PACKET_BUF(bank == 0),
                                         buf, len);
                         usb_dotoggle(udev, ep->epnum, 0);
-                        if (urb->actual_length == urb->transfer_buffer_length)
-                                urbstat = 0;
-                        else if (len < ep->maxpacket) {
-                                if (urb->transfer_flags & URB_SHORT_NOT_OK)
-                                        urbstat = -EREMOTEIO;
+                        if (urbstat == -EINPROGRESS &&
+                                        (len < ep->maxpacket ||
+                                                urb->actual_length ==
+                                                urb->transfer_buffer_length)) {
+                                if (usb_pipecontrol(urb->pipe))
+                                        ep->nextpid = USB_PID_ACK;
                                 else
                                         urbstat = 0;
                         }
-                        if (usb_pipecontrol(urb->pipe)
-                                        && (urbstat == -EREMOTEIO
-                                                || urbstat == 0)) {
-
-                                /* NOTE if the status stage STALLs (why?),
-                                 * this reports the wrong urb status.
-                                 */
-                                spin_lock(&urb->lock);
-                                if (urb->status == -EINPROGRESS)
-                                        urb->status = urbstat;
-                                spin_unlock(&urb->lock);
-
-                                urb = NULL;
-                                ep->nextpid = USB_PID_ACK;
-                        }
                         break;
                 case USB_PID_SETUP:
                         // PACKET("...ACK/setup_%02x qh%p\n", bank, ep);
@@ -605,7 +586,7 @@ done(struct sl811 *sl811, struct sl811h_ep *ep, u8 bank)
                                 bank, status, ep, urbstat);
         }
 
-        if (urb && (urbstat != -EINPROGRESS || urb->status != -EINPROGRESS))
+        if (urbstat != -EINPROGRESS || urb->unlinked)
                 finish_request(sl811, ep, urb, urbstat);
 }
 
@@ -807,7 +788,6 @@ static int balance(struct sl811 *sl811, u16 period, u16 load)
 
 static int sl811h_urb_enqueue(
         struct usb_hcd          *hcd,
-        struct usb_host_endpoint *hep,
         struct urb              *urb,
         gfp_t                   mem_flags
 ) {
@@ -820,7 +800,8 @@ static int sl811h_urb_enqueue(
         struct sl811h_ep        *ep = NULL;
         unsigned long           flags;
         int                     i;
-        int                     retval = 0;
+        int                     retval;
+        struct usb_host_endpoint        *hep = urb->ep;
 
 #ifdef  DISABLE_ISO
         if (type == PIPE_ISOCHRONOUS)
@@ -838,7 +819,12 @@ static int sl811h_urb_enqueue(
                         || !HC_IS_RUNNING(hcd->state)) {
                 retval = -ENODEV;
                 kfree(ep);
-                goto fail;
+                goto fail_not_linked;
+        }
+        retval = usb_hcd_link_urb_to_ep(hcd, urb);
+        if (retval) {
+                kfree(ep);
+                goto fail_not_linked;
         }
 
         if (hep->hcpriv) {
@@ -951,37 +937,31 @@ static int sl811h_urb_enqueue(
                 sofirq_on(sl811);
         }
 
-        /* in case of unlink-during-submit */
-        spin_lock(&urb->lock);
-        if (urb->status != -EINPROGRESS) {
-                spin_unlock(&urb->lock);
-                finish_request(sl811, ep, urb, 0);
-                retval = 0;
-                goto fail;
-        }
         urb->hcpriv = hep;
-        spin_unlock(&urb->lock);
-
         start_transfer(sl811);
         sl811_write(sl811, SL11H_IRQ_ENABLE, sl811->irq_enable);
 fail:
+        if (retval)
+                usb_hcd_unlink_urb_from_ep(hcd, urb);
+fail_not_linked:
         spin_unlock_irqrestore(&sl811->lock, flags);
         return retval;
 }
 
-static int sl811h_urb_dequeue(struct usb_hcd *hcd, struct urb *urb)
+static int sl811h_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
 {
         struct sl811            *sl811 = hcd_to_sl811(hcd);
         struct usb_host_endpoint *hep;
         unsigned long           flags;
         struct sl811h_ep        *ep;
-        int                     retval = 0;
+        int                     retval;
 
         spin_lock_irqsave(&sl811->lock, flags);
-        hep = urb->hcpriv;
-        if (!hep)
+        retval = usb_hcd_check_unlink_urb(hcd, urb, status);
+        if (retval)
                 goto fail;
 
+        hep = urb->hcpriv;
         ep = hep->hcpriv;
         if (ep) {
                 /* finish right away if this urb can't be active ...
@@ -1029,8 +1009,8 @@ static int sl811h_urb_dequeue(struct usb_hcd *hcd, struct urb *urb)
                         VDBG("dequeue, urb %p active %s; wait4irq\n", urb,
                                 (sl811->active_a == ep) ? "A" : "B");
         } else
-fail:
                 retval = -EINVAL;
+ fail:
         spin_unlock_irqrestore(&sl811->lock, flags);
         return retval;
 }
diff --git a/drivers/usb/host/u132-hcd.c b/drivers/usb/host/u132-hcd.c
index 7f765ec038cd..ac283b09a63f 100644
--- a/drivers/usb/host/u132-hcd.c
+++ b/drivers/usb/host/u132-hcd.c
@@ -51,7 +51,6 @@
 #include <linux/usb.h>
 #include <linux/workqueue.h>
 #include <linux/platform_device.h>
-#include <linux/pci_ids.h>
 #include <linux/mutex.h>
 #include <asm/io.h>
 #include <asm/irq.h>
@@ -184,7 +183,7 @@ struct u132_ring {
 struct u132 {
         struct kref kref;
         struct list_head u132_list;
-        struct semaphore sw_lock;
+        struct mutex sw_lock;
         struct semaphore scheduler_lock;
         struct u132_platform_data *board;
         struct platform_device *platform_dev;
@@ -493,20 +492,20 @@ static void u132_hcd_monitor_work(struct work_struct *work)
                 return;
         } else {
                 int retval;
-                down(&u132->sw_lock);
+                mutex_lock(&u132->sw_lock);
                 retval = read_roothub_info(u132);
                 if (retval) {
                         struct usb_hcd *hcd = u132_to_hcd(u132);
                         u132_disable(u132);
                         u132->going = 1;
-                        up(&u132->sw_lock);
+                        mutex_unlock(&u132->sw_lock);
                         usb_hc_died(hcd);
                         ftdi_elan_gone_away(u132->platform_dev);
                         u132_monitor_put_kref(u132);
                         return;
                 } else {
                         u132_monitor_requeue_work(u132, 500);
-                        up(&u132->sw_lock);
+                        mutex_unlock(&u132->sw_lock);
                         return;
                 }
         }
@@ -519,9 +518,8 @@ static void u132_hcd_giveback_urb(struct u132 *u132, struct u132_endp *endp,
         unsigned long irqs;
         struct usb_hcd *hcd = u132_to_hcd(u132);
         urb->error_count = 0;
-        urb->status = status;
-        urb->hcpriv = NULL;
         spin_lock_irqsave(&endp->queue_lock.slock, irqs);
+        usb_hcd_unlink_urb_from_ep(hcd, urb);
         endp->queue_next += 1;
         if (ENDP_QUEUE_SIZE > --endp->queue_size) {
                 endp->active = 0;
@@ -543,7 +541,7 @@ static void u132_hcd_giveback_urb(struct u132 *u132, struct u132_endp *endp,
         u132_ring_queue_work(u132, ring, 0);
         up(&u132->scheduler_lock);
         u132_endp_put_kref(u132, endp);
-        usb_hcd_giveback_urb(hcd, urb);
+        usb_hcd_giveback_urb(hcd, urb, status);
         return;
 }
 
@@ -559,9 +557,8 @@ static void u132_hcd_abandon_urb(struct u132 *u132, struct u132_endp *endp,
         unsigned long irqs;
         struct usb_hcd *hcd = u132_to_hcd(u132);
         urb->error_count = 0;
-        urb->status = status;
-        urb->hcpriv = NULL;
         spin_lock_irqsave(&endp->queue_lock.slock, irqs);
+        usb_hcd_unlink_urb_from_ep(hcd, urb);
         endp->queue_next += 1;
         if (ENDP_QUEUE_SIZE > --endp->queue_size) {
                 endp->active = 0;
@@ -576,7 +573,7 @@ static void u132_hcd_abandon_urb(struct u132 *u132, struct u132_endp *endp,
                 endp->active = 0;
                 spin_unlock_irqrestore(&endp->queue_lock.slock, irqs);
                 kfree(urbq);
-        } usb_hcd_giveback_urb(hcd, urb);
+        } usb_hcd_giveback_urb(hcd, urb, status);
         return;
 }
 
@@ -646,12 +643,12 @@ static void u132_hcd_interrupt_recv(void *data, struct urb *urb, u8 *buf,
                 u132_hcd_giveback_urb(u132, endp, urb, -EINTR);
                 return;
         } else if (u132->going > 0) {
-                dev_err(&u132->platform_dev->dev, "device is being removed urb="
-                        "%p status=%d\n", urb, urb->status);
+                dev_err(&u132->platform_dev->dev, "device is being removed "
+                                "urb=%p\n", urb);
                 up(&u132->scheduler_lock);
                 u132_hcd_giveback_urb(u132, endp, urb, -ENODEV);
                 return;
-        } else if (urb->status == -EINPROGRESS) {
+        } else if (!urb->unlinked) {
                 struct u132_ring *ring = endp->ring;
                 u8 *u = urb->transfer_buffer + urb->actual_length;
                 u8 *b = buf;
@@ -717,10 +714,10 @@ static void u132_hcd_interrupt_recv(void *data, struct urb *urb, u8 *buf,
                         return;
                 }
         } else {
-                dev_err(&u132->platform_dev->dev, "CALLBACK called urb=%p statu"
-                        "s=%d\n", urb, urb->status);
+                dev_err(&u132->platform_dev->dev, "CALLBACK called urb=%p "
+                                "unlinked=%d\n", urb, urb->unlinked);
                 up(&u132->scheduler_lock);
-                u132_hcd_giveback_urb(u132, endp, urb, urb->status);
+                u132_hcd_giveback_urb(u132, endp, urb, 0);
                 return;
         }
 }
@@ -745,12 +742,12 @@ static void u132_hcd_bulk_output_sent(void *data, struct urb *urb, u8 *buf,
                 u132_hcd_giveback_urb(u132, endp, urb, -EINTR);
                 return;
         } else if (u132->going > 0) {
-                dev_err(&u132->platform_dev->dev, "device is being removed urb="
-                        "%p status=%d\n", urb, urb->status);
+                dev_err(&u132->platform_dev->dev, "device is being removed "
+                                "urb=%p\n", urb);
                 up(&u132->scheduler_lock);
                 u132_hcd_giveback_urb(u132, endp, urb, -ENODEV);
                 return;
-        } else if (urb->status == -EINPROGRESS) {
+        } else if (!urb->unlinked) {
                 struct u132_ring *ring = endp->ring;
                 urb->actual_length += len;
                 endp->toggle_bits = toggle_bits;
@@ -769,10 +766,10 @@ static void u132_hcd_bulk_output_sent(void *data, struct urb *urb, u8 *buf,
                         return;
                 }
         } else {
-                dev_err(&u132->platform_dev->dev, "CALLBACK called urb=%p statu"
-                        "s=%d\n", urb, urb->status);
+                dev_err(&u132->platform_dev->dev, "CALLBACK called urb=%p "
+                                "unlinked=%d\n", urb, urb->unlinked);
                 up(&u132->scheduler_lock);
-                u132_hcd_giveback_urb(u132, endp, urb, urb->status);
+                u132_hcd_giveback_urb(u132, endp, urb, 0);
                 return;
         }
 }
@@ -798,12 +795,12 @@ static void u132_hcd_bulk_input_recv(void *data, struct urb *urb, u8 *buf,
                 u132_hcd_giveback_urb(u132, endp, urb, -EINTR);
                 return;
         } else if (u132->going > 0) {
-                dev_err(&u132->platform_dev->dev, "device is being removed urb="
-                        "%p status=%d\n", urb, urb->status);
+                dev_err(&u132->platform_dev->dev, "device is being removed "
+                                "urb=%p\n", urb);
                 up(&u132->scheduler_lock);
                 u132_hcd_giveback_urb(u132, endp, urb, -ENODEV);
                 return;
-        } else if (urb->status == -EINPROGRESS) {
+        } else if (!urb->unlinked) {
                 struct u132_ring *ring = endp->ring;
                 u8 *u = urb->transfer_buffer + urb->actual_length;
                 u8 *b = buf;
@@ -872,10 +869,10 @@ static void u132_hcd_bulk_input_recv(void *data, struct urb *urb, u8 *buf,
                         return;
                 }
         } else {
-                dev_err(&u132->platform_dev->dev, "CALLBACK called urb=%p statu"
-                        "s=%d\n", urb, urb->status);
+                dev_err(&u132->platform_dev->dev, "CALLBACK called urb=%p "
+                                "unlinked=%d\n", urb, urb->unlinked);
                 up(&u132->scheduler_lock);
-                u132_hcd_giveback_urb(u132, endp, urb, urb->status);
+                u132_hcd_giveback_urb(u132, endp, urb, 0);
                 return;
         }
 }
@@ -899,20 +896,20 @@ static void u132_hcd_configure_empty_sent(void *data, struct urb *urb, u8 *buf,
                 u132_hcd_giveback_urb(u132, endp, urb, -EINTR);
                 return;
         } else if (u132->going > 0) {
-                dev_err(&u132->platform_dev->dev, "device is being removed urb="
-                        "%p status=%d\n", urb, urb->status);
+                dev_err(&u132->platform_dev->dev, "device is being removed "
+                                "urb=%p\n", urb);
                 up(&u132->scheduler_lock);
                 u132_hcd_giveback_urb(u132, endp, urb, -ENODEV);
                 return;
-        } else if (urb->status == -EINPROGRESS) {
+        } else if (!urb->unlinked) {
                 up(&u132->scheduler_lock);
                 u132_hcd_giveback_urb(u132, endp, urb, 0);
                 return;
         } else {
-                dev_err(&u132->platform_dev->dev, "CALLBACK called urb=%p statu"
-                        "s=%d\n", urb, urb->status);
+                dev_err(&u132->platform_dev->dev, "CALLBACK called urb=%p "
+                                "unlinked=%d\n", urb, urb->unlinked);
                 up(&u132->scheduler_lock);
-                u132_hcd_giveback_urb(u132, endp, urb, urb->status);
+                u132_hcd_giveback_urb(u132, endp, urb, 0);
                 return;
         }
 }
@@ -937,12 +934,12 @@ static void u132_hcd_configure_input_recv(void *data, struct urb *urb, u8 *buf,
                 u132_hcd_giveback_urb(u132, endp, urb, -EINTR);
                 return;
         } else if (u132->going > 0) {
-                dev_err(&u132->platform_dev->dev, "device is being removed urb="
-                        "%p status=%d\n", urb, urb->status);
+                dev_err(&u132->platform_dev->dev, "device is being removed "
+                                "urb=%p\n", urb);
                 up(&u132->scheduler_lock);
                 u132_hcd_giveback_urb(u132, endp, urb, -ENODEV);
                 return;
-        } else if (urb->status == -EINPROGRESS) {
+        } else if (!urb->unlinked) {
                 struct u132_ring *ring = endp->ring;
                 u8 *u = urb->transfer_buffer;
                 u8 *b = buf;
@@ -981,10 +978,10 @@ static void u132_hcd_configure_input_recv(void *data, struct urb *urb, u8 *buf,
                         return;
                 }
         } else {
-                dev_err(&u132->platform_dev->dev, "CALLBACK called urb=%p statu"
-                        "s=%d\n", urb, urb->status);
+                dev_err(&u132->platform_dev->dev, "CALLBACK called urb=%p "
+                                "unlinked=%d\n", urb, urb->unlinked);
                 up(&u132->scheduler_lock);
-                u132_hcd_giveback_urb(u132, endp, urb, urb->status);
+                u132_hcd_giveback_urb(u132, endp, urb, 0);
                 return;
         }
 }
@@ -1008,20 +1005,20 @@ static void u132_hcd_configure_empty_recv(void *data, struct urb *urb, u8 *buf,
                 u132_hcd_giveback_urb(u132, endp, urb, -EINTR);
                 return;
         } else if (u132->going > 0) {
-                dev_err(&u132->platform_dev->dev, "device is being removed urb="
-                        "%p status=%d\n", urb, urb->status);
+                dev_err(&u132->platform_dev->dev, "device is being removed "
+                                "urb=%p\n", urb);
                 up(&u132->scheduler_lock);
                 u132_hcd_giveback_urb(u132, endp, urb, -ENODEV);
                 return;
-        } else if (urb->status == -EINPROGRESS) {
+        } else if (!urb->unlinked) {
                 up(&u132->scheduler_lock);
                 u132_hcd_giveback_urb(u132, endp, urb, 0);
                 return;
         } else {
-                dev_err(&u132->platform_dev->dev, "CALLBACK called urb=%p statu"
-                        "s=%d\n", urb, urb->status);
+                dev_err(&u132->platform_dev->dev, "CALLBACK called urb=%p "
+                                "unlinked=%d\n", urb, urb->unlinked);
                 up(&u132->scheduler_lock);
-                u132_hcd_giveback_urb(u132, endp, urb, urb->status);
+                u132_hcd_giveback_urb(u132, endp, urb, 0);
                 return;
         }
 }
@@ -1046,12 +1043,12 @@ static void u132_hcd_configure_setup_sent(void *data, struct urb *urb, u8 *buf,
                 u132_hcd_giveback_urb(u132, endp, urb, -EINTR);
                 return;
         } else if (u132->going > 0) {
-                dev_err(&u132->platform_dev->dev, "device is being removed urb="
-                        "%p status=%d\n", urb, urb->status);
+                dev_err(&u132->platform_dev->dev, "device is being removed "
+                                "urb=%p\n", urb);
                 up(&u132->scheduler_lock);
                 u132_hcd_giveback_urb(u132, endp, urb, -ENODEV);
                 return;
-        } else if (urb->status == -EINPROGRESS) {
+        } else if (!urb->unlinked) {
                 if (usb_pipein(urb->pipe)) {
                         int retval;
                         struct u132_ring *ring = endp->ring;
@@ -1078,10 +1075,10 @@ static void u132_hcd_configure_setup_sent(void *data, struct urb *urb, u8 *buf,
                         return;
                 }
         } else {
-                dev_err(&u132->platform_dev->dev, "CALLBACK called urb=%p statu"
-                        "s=%d\n", urb, urb->status);
+                dev_err(&u132->platform_dev->dev, "CALLBACK called urb=%p "
+                                "unlinked=%d\n", urb, urb->unlinked);
                 up(&u132->scheduler_lock);
-                u132_hcd_giveback_urb(u132, endp, urb, urb->status);
+                u132_hcd_giveback_urb(u132, endp, urb, 0);
                 return;
         }
 }
@@ -1107,22 +1104,22 @@ static void u132_hcd_enumeration_empty_recv(void *data, struct urb *urb,
                 u132_hcd_giveback_urb(u132, endp, urb, -EINTR);
                 return;
         } else if (u132->going > 0) {
-                dev_err(&u132->platform_dev->dev, "device is being removed urb="
-                        "%p status=%d\n", urb, urb->status);
+                dev_err(&u132->platform_dev->dev, "device is being removed "
+                                "urb=%p\n", urb);
                 up(&u132->scheduler_lock);
                 u132_hcd_giveback_urb(u132, endp, urb, -ENODEV);
                 return;
-        } else if (urb->status == -EINPROGRESS) {
+        } else if (!urb->unlinked) {
                 u132->addr[0].address = 0;
                 endp->usb_addr = udev->usb_addr;
                 up(&u132->scheduler_lock);
                 u132_hcd_giveback_urb(u132, endp, urb, 0);
                 return;
         } else {
-                dev_err(&u132->platform_dev->dev, "CALLBACK called urb=%p statu"
-                        "s=%d\n", urb, urb->status);
+                dev_err(&u132->platform_dev->dev, "CALLBACK called urb=%p "
+                                "unlinked=%d\n", urb, urb->unlinked);
                 up(&u132->scheduler_lock);
-                u132_hcd_giveback_urb(u132, endp, urb, urb->status);
+                u132_hcd_giveback_urb(u132, endp, urb, 0);
                 return;
         }
 }
@@ -1146,12 +1143,12 @@ static void u132_hcd_enumeration_address_sent(void *data, struct urb *urb,
                 u132_hcd_giveback_urb(u132, endp, urb, -EINTR);
                 return;
         } else if (u132->going > 0) {
-                dev_err(&u132->platform_dev->dev, "device is being removed urb="
-                        "%p status=%d\n", urb, urb->status);
+                dev_err(&u132->platform_dev->dev, "device is being removed "
+                                "urb=%p\n", urb);
                 up(&u132->scheduler_lock);
                 u132_hcd_giveback_urb(u132, endp, urb, -ENODEV);
                 return;
-        } else if (urb->status == -EINPROGRESS) {
+        } else if (!urb->unlinked) {
                 int retval;
                 struct u132_ring *ring = endp->ring;
                 up(&u132->scheduler_lock);
@@ -1163,10 +1160,10 @@ static void u132_hcd_enumeration_address_sent(void *data, struct urb *urb,
                         u132_hcd_giveback_urb(u132, endp, urb, retval);
                 return;
         } else {
-                dev_err(&u132->platform_dev->dev, "CALLBACK called urb=%p statu"
-                        "s=%d\n", urb, urb->status);
+                dev_err(&u132->platform_dev->dev, "CALLBACK called urb=%p "
+                                "unlinked=%d\n", urb, urb->unlinked);
                 up(&u132->scheduler_lock);
-                u132_hcd_giveback_urb(u132, endp, urb, urb->status);
+                u132_hcd_giveback_urb(u132, endp, urb, 0);
                 return;
         }
 }
@@ -1190,20 +1187,20 @@ static void u132_hcd_initial_empty_sent(void *data, struct urb *urb, u8 *buf,
                 u132_hcd_giveback_urb(u132, endp, urb, -EINTR);
                 return;
         } else if (u132->going > 0) {
-                dev_err(&u132->platform_dev->dev, "device is being removed urb="
-                        "%p status=%d\n", urb, urb->status);
+                dev_err(&u132->platform_dev->dev, "device is being removed "
+                                "urb=%p\n", urb);
                 up(&u132->scheduler_lock);
                 u132_hcd_giveback_urb(u132, endp, urb, -ENODEV);
                 return;
-        } else if (urb->status == -EINPROGRESS) {
+        } else if (!urb->unlinked) {
                 up(&u132->scheduler_lock);
                 u132_hcd_giveback_urb(u132, endp, urb, 0);
                 return;
         } else {
-                dev_err(&u132->platform_dev->dev, "CALLBACK called urb=%p statu"
-                        "s=%d\n", urb, urb->status);
+                dev_err(&u132->platform_dev->dev, "CALLBACK called urb=%p "
+                                "unlinked=%d\n", urb, urb->unlinked);
                 up(&u132->scheduler_lock);
-                u132_hcd_giveback_urb(u132, endp, urb, urb->status);
+                u132_hcd_giveback_urb(u132, endp, urb, 0);
                 return;
         }
 }
@@ -1228,12 +1225,12 @@ static void u132_hcd_initial_input_recv(void *data, struct urb *urb, u8 *buf,
                 u132_hcd_giveback_urb(u132, endp, urb, -EINTR);
                 return;
         } else if (u132->going > 0) {
-                dev_err(&u132->platform_dev->dev, "device is being removed urb="
-                        "%p status=%d\n", urb, urb->status);
+                dev_err(&u132->platform_dev->dev, "device is being removed "
+                                "urb=%p\n", urb);
                 up(&u132->scheduler_lock);
                 u132_hcd_giveback_urb(u132, endp, urb, -ENODEV);
                 return;
-        } else if (urb->status == -EINPROGRESS) {
+        } else if (!urb->unlinked) {
                 int retval;
                 struct u132_ring *ring = endp->ring;
                 u8 *u = urb->transfer_buffer;
@@ -1252,10 +1249,10 @@ static void u132_hcd_initial_input_recv(void *data, struct urb *urb, u8 *buf,
                         u132_hcd_giveback_urb(u132, endp, urb, retval);
                 return;
         } else {
-                dev_err(&u132->platform_dev->dev, "CALLBACK called urb=%p statu"
-                        "s=%d\n", urb, urb->status);
+                dev_err(&u132->platform_dev->dev, "CALLBACK called urb=%p "
+                                "unlinked=%d\n", urb, urb->unlinked);
                 up(&u132->scheduler_lock);
-                u132_hcd_giveback_urb(u132, endp, urb, urb->status);
+                u132_hcd_giveback_urb(u132, endp, urb, 0);
                 return;
         }
 }
@@ -1280,12 +1277,12 @@ static void u132_hcd_initial_setup_sent(void *data, struct urb *urb, u8 *buf,
                 u132_hcd_giveback_urb(u132, endp, urb, -EINTR);
                 return;
         } else if (u132->going > 0) {
-                dev_err(&u132->platform_dev->dev, "device is being removed urb="
-                        "%p status=%d\n", urb, urb->status);
+                dev_err(&u132->platform_dev->dev, "device is being removed "
+                                "urb=%p\n", urb);
                 up(&u132->scheduler_lock);
                 u132_hcd_giveback_urb(u132, endp, urb, -ENODEV);
                 return;
-        } else if (urb->status == -EINPROGRESS) {
+        } else if (!urb->unlinked) {
                 int retval;
                 struct u132_ring *ring = endp->ring;
                 up(&u132->scheduler_lock);
@@ -1297,10 +1294,10 @@ static void u132_hcd_initial_setup_sent(void *data, struct urb *urb, u8 *buf,
                         u132_hcd_giveback_urb(u132, endp, urb, retval);
                 return;
         } else {
-                dev_err(&u132->platform_dev->dev, "CALLBACK called urb=%p statu"
-                        "s=%d\n", urb, urb->status);
+                dev_err(&u132->platform_dev->dev, "CALLBACK called urb=%p "
+                                "unlinked=%d\n", urb, urb->unlinked);
                 up(&u132->scheduler_lock);
-                u132_hcd_giveback_urb(u132, endp, urb, urb->status);
+                u132_hcd_giveback_urb(u132, endp, urb, 0);
                 return;
         }
 }
@@ -1520,12 +1517,15 @@ static void u132_hcd_endp_work_scheduler(struct work_struct *work)
                 }
         }
 }
+#ifdef CONFIG_PM
 
 static void port_power(struct u132 *u132, int pn, int is_on)
 {
         u132->port[pn].power = is_on;
 }
 
+#endif
+
 static void u132_power(struct u132 *u132, int is_on)
 {
         struct usb_hcd *hcd = u132_to_hcd(u132)
@@ -1802,10 +1802,10 @@ static void u132_hcd_stop(struct usb_hcd *hcd)
                 dev_err(&u132->platform_dev->dev, "device hcd=%p is being remov"
                         "ed\n", hcd);
         } else {
-                down(&u132->sw_lock);
+                mutex_lock(&u132->sw_lock);
                 msleep(100);
                 u132_power(u132, 0);
-                up(&u132->sw_lock);
+                mutex_unlock(&u132->sw_lock);
         }
 }
 
@@ -1827,7 +1827,7 @@ static int u132_hcd_start(struct usb_hcd *hcd)
                         (pdev->dev.platform_data))->vendor;
                 u16 device = ((struct u132_platform_data *)
                         (pdev->dev.platform_data))->device;
-                down(&u132->sw_lock);
+                mutex_lock(&u132->sw_lock);
                 msleep(10);
                 if (vendor == PCI_VENDOR_ID_AMD && device == 0x740c) {
                         u132->flags = OHCI_QUIRK_AMD756;
@@ -1842,7 +1842,7 @@ static int u132_hcd_start(struct usb_hcd *hcd)
                         u132->going = 1;
                 }
                 msleep(100);
-                up(&u132->sw_lock);
+                mutex_unlock(&u132->sw_lock);
                 return retval;
         } else {
                 dev_err(&u132->platform_dev->dev, "platform_device missing\n");
@@ -1862,32 +1862,44 @@ static int u132_hcd_reset(struct usb_hcd *hcd)
                 return -ESHUTDOWN;
         } else {
                 int retval;
-                down(&u132->sw_lock);
+                mutex_lock(&u132->sw_lock);
                 retval = u132_init(u132);
                 if (retval) {
                         u132_disable(u132);
                         u132->going = 1;
                 }
-                up(&u132->sw_lock);
+                mutex_unlock(&u132->sw_lock);
                 return retval;
         }
 }
 
 static int create_endpoint_and_queue_int(struct u132 *u132,
-        struct u132_udev *udev, struct usb_host_endpoint *hep, struct urb *urb,
+        struct u132_udev *udev, struct urb *urb,
         struct usb_device *usb_dev, u8 usb_addr, u8 usb_endp, u8 address,
         gfp_t mem_flags)
 {
         struct u132_ring *ring;
         unsigned long irqs;
-        u8 endp_number = ++u132->num_endpoints;
-        struct u132_endp *endp = hep->hcpriv = u132->endp[endp_number - 1] =
-                kmalloc(sizeof(struct u132_endp), mem_flags);
+        int rc;
+        u8 endp_number;
+        struct u132_endp *endp = kmalloc(sizeof(struct u132_endp), mem_flags);
+
         if (!endp) {
                 return -ENOMEM;
         }
+
+        spin_lock_init(&endp->queue_lock.slock);
+        spin_lock_irqsave(&endp->queue_lock.slock, irqs);
+        rc = usb_hcd_link_urb_to_ep(u132_to_hcd(u132), urb);
+        if (rc) {
+                spin_unlock_irqrestore(&endp->queue_lock.slock, irqs);
+                kfree(endp);
+                return rc;
+        }
+
+        endp_number = ++u132->num_endpoints;
+        urb->ep->hcpriv = u132->endp[endp_number - 1] = endp;
         INIT_DELAYED_WORK(&endp->scheduler, u132_hcd_endp_work_scheduler);
-        spin_lock_init(&endp->queue_lock.slock);
         INIT_LIST_HEAD(&endp->urb_more);
         ring = endp->ring = &u132->ring[0];
         if (ring->curr_endp) {
@@ -1903,7 +1915,7 @@ static int create_endpoint_and_queue_int(struct u132 *u132,
         endp->delayed = 0;
         endp->endp_number = endp_number;
         endp->u132 = u132;
-        endp->hep = hep;
+        endp->hep = urb->ep;
         endp->pipetype = usb_pipetype(urb->pipe);
         u132_endp_init_kref(u132, endp);
         if (usb_pipein(urb->pipe)) {
@@ -1922,7 +1934,6 @@ static int create_endpoint_and_queue_int(struct u132 *u132,
                 u132_udev_get_kref(u132, udev);
         }
         urb->hcpriv = u132;
-        spin_lock_irqsave(&endp->queue_lock.slock, irqs);
         endp->delayed = 1;
         endp->jiffies = jiffies + msecs_to_jiffies(urb->interval);
         endp->udev_number = address;
@@ -1937,8 +1948,8 @@ static int create_endpoint_and_queue_int(struct u132 *u132,
         return 0;
 }
 
-static int queue_int_on_old_endpoint(struct u132 *u132, struct u132_udev *udev,
-        struct usb_host_endpoint *hep, struct urb *urb,
+static int queue_int_on_old_endpoint(struct u132 *u132,
+        struct u132_udev *udev, struct urb *urb,
         struct usb_device *usb_dev, struct u132_endp *endp, u8 usb_addr,
         u8 usb_endp, u8 address)
 {
@@ -1962,21 +1973,33 @@ static int queue_int_on_old_endpoint(struct u132 *u132, struct u132_udev *udev,
 }
 
 static int create_endpoint_and_queue_bulk(struct u132 *u132,
-        struct u132_udev *udev, struct usb_host_endpoint *hep, struct urb *urb,
+        struct u132_udev *udev, struct urb *urb,
         struct usb_device *usb_dev, u8 usb_addr, u8 usb_endp, u8 address,
         gfp_t mem_flags)
 {
         int ring_number;
         struct u132_ring *ring;
         unsigned long irqs;
-        u8 endp_number = ++u132->num_endpoints;
-        struct u132_endp *endp = hep->hcpriv = u132->endp[endp_number - 1] =
-                kmalloc(sizeof(struct u132_endp), mem_flags);
+        int rc;
+        u8 endp_number;
+        struct u132_endp *endp = kmalloc(sizeof(struct u132_endp), mem_flags);
+
         if (!endp) {
                 return -ENOMEM;
         }
+
+        spin_lock_init(&endp->queue_lock.slock);
+        spin_lock_irqsave(&endp->queue_lock.slock, irqs);
+        rc = usb_hcd_link_urb_to_ep(u132_to_hcd(u132), urb);
+        if (rc) {
+                spin_unlock_irqrestore(&endp->queue_lock.slock, irqs);
+                kfree(endp);
+                return rc;
+        }
+
+        endp_number = ++u132->num_endpoints;
+        urb->ep->hcpriv = u132->endp[endp_number - 1] = endp;
         INIT_DELAYED_WORK(&endp->scheduler, u132_hcd_endp_work_scheduler);
-        spin_lock_init(&endp->queue_lock.slock);
         INIT_LIST_HEAD(&endp->urb_more);
         endp->dequeueing = 0;
         endp->edset_flush = 0;
@@ -1984,7 +2007,7 @@ static int create_endpoint_and_queue_bulk(struct u132 *u132,
         endp->delayed = 0;
         endp->endp_number = endp_number;
         endp->u132 = u132;
-        endp->hep = hep;
+        endp->hep = urb->ep;
         endp->pipetype = usb_pipetype(urb->pipe);
         u132_endp_init_kref(u132, endp);
         if (usb_pipein(urb->pipe)) {
@@ -2013,7 +2036,6 @@ static int create_endpoint_and_queue_bulk(struct u132 *u132,
         }
         ring->length += 1;
         urb->hcpriv = u132;
-        spin_lock_irqsave(&endp->queue_lock.slock, irqs);
         endp->udev_number = address;
         endp->usb_addr = usb_addr;
         endp->usb_endp = usb_endp;
@@ -2027,7 +2049,7 @@ static int create_endpoint_and_queue_bulk(struct u132 *u132,
 }
 
 static int queue_bulk_on_old_endpoint(struct u132 *u132, struct u132_udev *udev,
-         struct usb_host_endpoint *hep, struct urb *urb,
+        struct urb *urb,
         struct usb_device *usb_dev, struct u132_endp *endp, u8 usb_addr,
         u8 usb_endp, u8 address)
 {
@@ -2049,19 +2071,32 @@ static int queue_bulk_on_old_endpoint(struct u132 *u132, struct u132_udev *udev,
 }
 
 static int create_endpoint_and_queue_control(struct u132 *u132,
-        struct usb_host_endpoint *hep, struct urb *urb,
+        struct urb *urb,
         struct usb_device *usb_dev, u8 usb_addr, u8 usb_endp,
         gfp_t mem_flags)
 {
         struct u132_ring *ring;
-        u8 endp_number = ++u132->num_endpoints;
-        struct u132_endp *endp = hep->hcpriv = u132->endp[endp_number - 1] =
-                kmalloc(sizeof(struct u132_endp), mem_flags);
+        unsigned long irqs;
+        int rc;
+        u8 endp_number;
+        struct u132_endp *endp = kmalloc(sizeof(struct u132_endp), mem_flags);
+
         if (!endp) {
                 return -ENOMEM;
         }
+
+        spin_lock_init(&endp->queue_lock.slock);
+        spin_lock_irqsave(&endp->queue_lock.slock, irqs);
+        rc = usb_hcd_link_urb_to_ep(u132_to_hcd(u132), urb);
+        if (rc) {
+                spin_unlock_irqrestore(&endp->queue_lock.slock, irqs);
+                kfree(endp);
+                return rc;
+        }
+
+        endp_number = ++u132->num_endpoints;
+        urb->ep->hcpriv = u132->endp[endp_number - 1] = endp;
         INIT_DELAYED_WORK(&endp->scheduler, u132_hcd_endp_work_scheduler);
-        spin_lock_init(&endp->queue_lock.slock);
         INIT_LIST_HEAD(&endp->urb_more);
         ring = endp->ring = &u132->ring[0];
         if (ring->curr_endp) {
@@ -2077,11 +2112,10 @@ static int create_endpoint_and_queue_control(struct u132 *u132,
         endp->delayed = 0;
         endp->endp_number = endp_number;
         endp->u132 = u132;
-        endp->hep = hep;
+        endp->hep = urb->ep;
         u132_endp_init_kref(u132, endp);
         u132_endp_get_kref(u132, endp);
         if (usb_addr == 0) {
-                unsigned long irqs;
                 u8 address = u132->addr[usb_addr].address;
                 struct u132_udev *udev = &u132->udev[address];
                 endp->udev_number = address;
@@ -2095,7 +2129,6 @@ static int create_endpoint_and_queue_control(struct u132 *u132,
                 udev->endp_number_in[usb_endp] = endp_number;
                 udev->endp_number_out[usb_endp] = endp_number;
                 urb->hcpriv = u132;
-                spin_lock_irqsave(&endp->queue_lock.slock, irqs);
                 endp->queue_size = 1;
                 endp->queue_last = 0;
                 endp->queue_next = 0;
@@ -2104,7 +2137,6 @@ static int create_endpoint_and_queue_control(struct u132 *u132,
                 u132_endp_queue_work(u132, endp, 0);
                 return 0;
         } else {                /*(usb_addr > 0) */
-                unsigned long irqs;
                 u8 address = u132->addr[usb_addr].address;
                 struct u132_udev *udev = &u132->udev[address];
                 endp->udev_number = address;
@@ -2118,7 +2150,6 @@ static int create_endpoint_and_queue_control(struct u132 *u132,
                 udev->endp_number_in[usb_endp] = endp_number;
                 udev->endp_number_out[usb_endp] = endp_number;
                 urb->hcpriv = u132;
-                spin_lock_irqsave(&endp->queue_lock.slock, irqs);
                 endp->queue_size = 1;
                 endp->queue_last = 0;
                 endp->queue_next = 0;
@@ -2130,7 +2161,7 @@ static int create_endpoint_and_queue_control(struct u132 *u132,
 }
 
 static int queue_control_on_old_endpoint(struct u132 *u132,
-        struct usb_host_endpoint *hep, struct urb *urb,
+        struct urb *urb,
         struct usb_device *usb_dev, struct u132_endp *endp, u8 usb_addr,
         u8 usb_endp)
 {
@@ -2230,8 +2261,8 @@ static int queue_control_on_old_endpoint(struct u132 *u132,
         }
 }
 
-static int u132_urb_enqueue(struct usb_hcd *hcd, struct usb_host_endpoint *hep,
-        struct urb *urb, gfp_t mem_flags)
+static int u132_urb_enqueue(struct usb_hcd *hcd, struct urb *urb,
+                gfp_t mem_flags)
 {
         struct u132 *u132 = hcd_to_u132(hcd);
         if (irqs_disabled()) {
@@ -2246,8 +2277,8 @@ static int u132_urb_enqueue(struct usb_hcd *hcd, struct usb_host_endpoint *hep,
                         , u132->going);
                 return -ENODEV;
         } else if (u132->going > 0) {
-                dev_err(&u132->platform_dev->dev, "device is being removed urb="
-                        "%p status=%d\n", urb, urb->status);
+                dev_err(&u132->platform_dev->dev, "device is being removed "
+                                "urb=%p\n", urb);
                 return -ESHUTDOWN;
         } else {
                 u8 usb_addr = usb_pipedevice(urb->pipe);
@@ -2256,16 +2287,24 @@ static int u132_urb_enqueue(struct usb_hcd *hcd, struct usb_host_endpoint *hep,
                 if (usb_pipetype(urb->pipe) == PIPE_INTERRUPT) {
                         u8 address = u132->addr[usb_addr].address;
                         struct u132_udev *udev = &u132->udev[address];
-                        struct u132_endp *endp = hep->hcpriv;
+                        struct u132_endp *endp = urb->ep->hcpriv;
                         urb->actual_length = 0;
                         if (endp) {
                                 unsigned long irqs;
                                 int retval;
                                 spin_lock_irqsave(&endp->queue_lock.slock,
                                         irqs);
-                                retval = queue_int_on_old_endpoint(u132, udev,
-                                        hep, urb, usb_dev, endp, usb_addr,
-                                        usb_endp, address);
+                                retval = usb_hcd_link_urb_to_ep(hcd, urb);
+                                if (retval == 0) {
+                                        retval = queue_int_on_old_endpoint(
+                                                        u132, udev, urb,
+                                                        usb_dev, endp,
+                                                        usb_addr, usb_endp,
+                                                        address);
+                                        if (retval)
+                                                usb_hcd_unlink_urb_from_ep(
+                                                                hcd, urb);
+                                }
                                 spin_unlock_irqrestore(&endp->queue_lock.slock,
                                         irqs);
                                 if (retval) {
@@ -2280,8 +2319,8 @@ static int u132_urb_enqueue(struct usb_hcd *hcd, struct usb_host_endpoint *hep,
                                 return -EINVAL;
                         } else {        /*(endp == NULL) */
                                 return create_endpoint_and_queue_int(u132, udev,
-                                         hep, urb, usb_dev, usb_addr, usb_endp,
-                                        address, mem_flags);
+                                                urb, usb_dev, usb_addr,
+                                                usb_endp, address, mem_flags);
                         }
                 } else if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
                         dev_err(&u132->platform_dev->dev, "the hardware does no"
@@ -2290,16 +2329,24 @@ static int u132_urb_enqueue(struct usb_hcd *hcd, struct usb_host_endpoint *hep,
                 } else if (usb_pipetype(urb->pipe) == PIPE_BULK) {
                         u8 address = u132->addr[usb_addr].address;
                         struct u132_udev *udev = &u132->udev[address];
-                        struct u132_endp *endp = hep->hcpriv;
+                        struct u132_endp *endp = urb->ep->hcpriv;
                         urb->actual_length = 0;
                         if (endp) {
                                 unsigned long irqs;
                                 int retval;
                                 spin_lock_irqsave(&endp->queue_lock.slock,
                                         irqs);
-                                retval = queue_bulk_on_old_endpoint(u132, udev,
-                                        hep, urb, usb_dev, endp, usb_addr,
-                                        usb_endp, address);
+                                retval = usb_hcd_link_urb_to_ep(hcd, urb);
+                                if (retval == 0) {
+                                        retval = queue_bulk_on_old_endpoint(
+                                                        u132, udev, urb,
+                                                        usb_dev, endp,
+                                                        usb_addr, usb_endp,
+                                                        address);
+                                        if (retval)
+                                                usb_hcd_unlink_urb_from_ep(
+                                                                hcd, urb);
+                                }
                                 spin_unlock_irqrestore(&endp->queue_lock.slock,
                                         irqs);
                                 if (retval) {
@@ -2312,10 +2359,10 @@ static int u132_urb_enqueue(struct usb_hcd *hcd, struct usb_host_endpoint *hep,
                                 return -EINVAL;
                         } else
                                 return create_endpoint_and_queue_bulk(u132,
-                                        udev, hep, urb, usb_dev, usb_addr,
+                                        udev, urb, usb_dev, usb_addr,
                                         usb_endp, address, mem_flags);
                 } else {
-                        struct u132_endp *endp = hep->hcpriv;
+                        struct u132_endp *endp = urb->ep->hcpriv;
                         u16 urb_size = 8;
                         u8 *b = urb->setup_packet;
                         int i = 0;
@@ -2338,9 +2385,16 @@ static int u132_urb_enqueue(struct usb_hcd *hcd, struct usb_host_endpoint *hep,
                                 int retval;
                                 spin_lock_irqsave(&endp->queue_lock.slock,
                                         irqs);
-                                retval = queue_control_on_old_endpoint(u132,
-                                        hep, urb, usb_dev, endp, usb_addr,
-                                        usb_endp);
+                                retval = usb_hcd_link_urb_to_ep(hcd, urb);
+                                if (retval == 0) {
+                                        retval = queue_control_on_old_endpoint(
+                                                        u132, urb, usb_dev,
+                                                        endp, usb_addr,
+                                                        usb_endp);
+                                        if (retval)
+                                                usb_hcd_unlink_urb_from_ep(
+                                                                hcd, urb);
+                                }
                                 spin_unlock_irqrestore(&endp->queue_lock.slock,
                                         irqs);
                                 if (retval) {
@@ -2353,7 +2407,7 @@ static int u132_urb_enqueue(struct usb_hcd *hcd, struct usb_host_endpoint *hep,
                                 return -EINVAL;
                         } else
                                 return create_endpoint_and_queue_control(u132,
-                                        hep, urb, usb_dev, usb_addr, usb_endp,
+                                        urb, usb_dev, usb_addr, usb_endp,
                                         mem_flags);
                 }
         }
@@ -2372,8 +2426,7 @@ static int dequeue_from_overflow_chain(struct u132 *u132,
                         list_del(scan);
                         endp->queue_size -= 1;
                         urb->error_count = 0;
-                        urb->hcpriv = NULL;
-                        usb_hcd_giveback_urb(hcd, urb);
+                        usb_hcd_giveback_urb(hcd, urb, 0);
                         return 0;
                 } else
                         continue;
@@ -2388,10 +2441,17 @@ static int dequeue_from_overflow_chain(struct u132 *u132,
 }
 
 static int u132_endp_urb_dequeue(struct u132 *u132, struct u132_endp *endp,
-        struct urb *urb)
+                struct urb *urb, int status)
 {
         unsigned long irqs;
+        int rc;
+
         spin_lock_irqsave(&endp->queue_lock.slock, irqs);
+        rc = usb_hcd_check_unlink_urb(u132_to_hcd(u132), urb, status);
+        if (rc) {
+                spin_unlock_irqrestore(&endp->queue_lock.slock, irqs);
+                return rc;
+        }
         if (endp->queue_size == 0) {
                 dev_err(&u132->platform_dev->dev, "urb=%p not found in endp[%d]"
                         "=%p ring[%d] %c%c usb_endp=%d usb_addr=%d\n", urb,
@@ -2407,11 +2467,10 @@ static int u132_endp_urb_dequeue(struct u132 *u132, struct u132_endp *endp,
                         endp->edset_flush = 1;
                         u132_endp_queue_work(u132, endp, 0);
                         spin_unlock_irqrestore(&endp->queue_lock.slock, irqs);
-                        urb->hcpriv = NULL;
                         return 0;
                 } else {
                         spin_unlock_irqrestore(&endp->queue_lock.slock, irqs);
-                        u132_hcd_abandon_urb(u132, endp, urb, urb->status);
+                        u132_hcd_abandon_urb(u132, endp, urb, status);
                         return 0;
                 }
         } else {
@@ -2436,6 +2495,8 @@ static int u132_endp_urb_dequeue(struct u132 *u132, struct u132_endp *endp,
                 }
                 if (urb_slot) {
                         struct usb_hcd *hcd = u132_to_hcd(u132);
+
+                        usb_hcd_unlink_urb_from_ep(hcd, urb);
                         endp->queue_size -= 1;
                         if (list_empty(&endp->urb_more)) {
                                 spin_unlock_irqrestore(&endp->queue_lock.slock,
@@ -2450,8 +2511,7 @@ static int u132_endp_urb_dequeue(struct u132 *u132, struct u132_endp *endp,
                                         irqs);
                                 kfree(urbq);
                         } urb->error_count = 0;
-                        urb->hcpriv = NULL;
-                        usb_hcd_giveback_urb(hcd, urb);
+                        usb_hcd_giveback_urb(hcd, urb, status);
                         return 0;
                 } else if (list_empty(&endp->urb_more)) {
                         dev_err(&u132->platform_dev->dev, "urb=%p not found in "
@@ -2465,7 +2525,10 @@ static int u132_endp_urb_dequeue(struct u132 *u132, struct u132_endp *endp,
                         spin_unlock_irqrestore(&endp->queue_lock.slock, irqs);
                         return -EINVAL;
                 } else {
-                        int retval = dequeue_from_overflow_chain(u132, endp,
+                        int retval;
+
+                        usb_hcd_unlink_urb_from_ep(u132_to_hcd(u132), urb);
+                        retval = dequeue_from_overflow_chain(u132, endp,
                                 urb);
                         spin_unlock_irqrestore(&endp->queue_lock.slock, irqs);
                         return retval;
@@ -2473,7 +2536,7 @@ static int u132_endp_urb_dequeue(struct u132 *u132, struct u132_endp *endp,
         }
 }
 
-static int u132_urb_dequeue(struct usb_hcd *hcd, struct urb *urb)
+static int u132_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
 {
         struct u132 *u132 = hcd_to_u132(hcd);
         if (u132->going > 2) {
@@ -2488,11 +2551,11 @@ static int u132_urb_dequeue(struct usb_hcd *hcd, struct urb *urb)
                 if (usb_pipein(urb->pipe)) {
                         u8 endp_number = udev->endp_number_in[usb_endp];
                         struct u132_endp *endp = u132->endp[endp_number - 1];
-                        return u132_endp_urb_dequeue(u132, endp, urb);
+                        return u132_endp_urb_dequeue(u132, endp, urb, status);
                 } else {
                         u8 endp_number = udev->endp_number_out[usb_endp];
                         struct u132_endp *endp = u132->endp[endp_number - 1];
-                        return u132_endp_urb_dequeue(u132, endp, urb);
+                        return u132_endp_urb_dequeue(u132, endp, urb, status);
                 }
         }
 }
@@ -2802,7 +2865,7 @@ static int u132_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
                 return -ESHUTDOWN;
         } else {
                 int retval = 0;
-                down(&u132->sw_lock);
+                mutex_lock(&u132->sw_lock);
                 switch (typeReq) {
                 case ClearHubFeature:
                         switch (wValue) {
@@ -2865,7 +2928,7 @@ static int u132_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
                       stall:retval = -EPIPE;
                         break;
                 }
-                up(&u132->sw_lock);
+                mutex_unlock(&u132->sw_lock);
                 return retval;
         }
 }
@@ -3001,7 +3064,7 @@ static int __devexit u132_remove(struct platform_device *pdev)
                         dev_err(&u132->platform_dev->dev, "removing device u132"
                                 ".%d\n", u132->sequence_num);
                         msleep(100);
-                        down(&u132->sw_lock);
+                        mutex_lock(&u132->sw_lock);
                         u132_monitor_cancel_work(u132);
                         while (rings-- > 0) {
                                 struct u132_ring *ring = &u132->ring[rings];
@@ -3014,7 +3077,7 @@ static int __devexit u132_remove(struct platform_device *pdev)
                         u132->going += 1;
                         printk(KERN_INFO "removing device u132.%d\n",
                                 u132->sequence_num);
-                        up(&u132->sw_lock);
+                        mutex_unlock(&u132->sw_lock);
                         usb_remove_hcd(hcd);
                         u132_u132_put_kref(u132);
                         return 0;
@@ -3034,7 +3097,7 @@ static void u132_initialise(struct u132 *u132, struct platform_device *pdev)
         u132->platform_dev = pdev;
         u132->power = 0;
         u132->reset = 0;
-        init_MUTEX(&u132->sw_lock);
+        mutex_init(&u132->sw_lock);
         init_MUTEX(&u132->scheduler_lock);
         while (rings-- > 0) {
                 struct u132_ring *ring = &u132->ring[rings];
@@ -3044,7 +3107,7 @@ static void u132_initialise(struct u132 *u132, struct platform_device *pdev)
                 ring->curr_endp = NULL;
                 INIT_DELAYED_WORK(&ring->scheduler,
                                   u132_hcd_ring_work_scheduler);
-        } down(&u132->sw_lock);
+        } mutex_lock(&u132->sw_lock);
         INIT_DELAYED_WORK(&u132->monitor, u132_hcd_monitor_work);
         while (ports-- > 0) {
                 struct u132_port *port = &u132->port[ports];
@@ -3074,7 +3137,7 @@ static void u132_initialise(struct u132 *u132, struct platform_device *pdev)
         while (endps-- > 0) {
                 u132->endp[endps] = NULL;
         }
-        up(&u132->sw_lock);
+        mutex_unlock(&u132->sw_lock);
         return;
 }
 
diff --git a/drivers/usb/host/uhci-debug.c b/drivers/usb/host/uhci-debug.c
index 1497371583b9..20cc58b97807 100644
--- a/drivers/usb/host/uhci-debug.c
+++ b/drivers/usb/host/uhci-debug.c
@@ -120,8 +120,8 @@ static int uhci_show_urbp(struct urb_priv *urbp, char *buf, int len, int space)
         out += sprintf(out, "%s%s", ptype, (urbp->fsbr ? " FSBR" : ""));
         out += sprintf(out, " Actlen=%d", urbp->urb->actual_length);
 
-        if (urbp->urb->status != -EINPROGRESS)
-                out += sprintf(out, " Status=%d", urbp->urb->status);
+        if (urbp->urb->unlinked)
+                out += sprintf(out, " Unlinked=%d", urbp->urb->unlinked);
         out += sprintf(out, "\n");
 
         i = nactive = ninactive = 0;
diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c
index 805e5fc5f5db..4db17f75f4f1 100644
--- a/drivers/usb/host/uhci-hcd.c
+++ b/drivers/usb/host/uhci-hcd.c
@@ -237,7 +237,7 @@ static int resume_detect_interrupts_are_broken(struct uhci_hcd *uhci)
 static int remote_wakeup_is_broken(struct uhci_hcd *uhci)
 {
         int port;
-        char *sys_info;
+        const char *sys_info;
         static char bad_Asus_board[] = "A7V8X";
 
         /* One of Asus's motherboards has a bug which causes it to
diff --git a/drivers/usb/host/uhci-hcd.h b/drivers/usb/host/uhci-hcd.h
index 1b3d23406ac4..340d6ed3e6e9 100644
--- a/drivers/usb/host/uhci-hcd.h
+++ b/drivers/usb/host/uhci-hcd.h
@@ -146,7 +146,6 @@ struct uhci_qh {
         short phase;                    /* Between 0 and period-1 */
         short load;                     /* Periodic time requirement, in us */
         unsigned int iso_frame;         /* Frame # for iso_packet_desc */
-        int iso_status;                 /* Status for Isochronous URBs */
 
         int state;                      /* QH_STATE_xxx; see above */
         int type;                       /* Queue type (control, bulk, etc) */
@@ -457,21 +456,6 @@ struct urb_priv {
 };
 
 
-/*
- * Locking in uhci.c
- *
- * Almost everything relating to the hardware schedule and processing
- * of URBs is protected by uhci->lock.  urb->status is protected by
- * urb->lock; that's the one exception.
- *
- * To prevent deadlocks, never lock uhci->lock while holding urb->lock.
- * The safe order of locking is:
- *
- * #1 uhci->lock
- * #2 urb->lock
- */
-
-
 /* Some special IDs */
 
 #define PCI_VENDOR_ID_GENESYS           0x17a0
diff --git a/drivers/usb/host/uhci-q.c b/drivers/usb/host/uhci-q.c
index 3bb908ca38e9..e5d60d5b105a 100644
--- a/drivers/usb/host/uhci-q.c
+++ b/drivers/usb/host/uhci-q.c
@@ -757,7 +757,6 @@ static void uhci_free_urb_priv(struct uhci_hcd *uhci,
                 uhci_free_td(uhci, td);
         }
 
-        urbp->urb->hcpriv = NULL;
         kmem_cache_free(uhci_up_cachep, urbp);
 }
 
@@ -1324,7 +1323,6 @@ static int uhci_submit_isochronous(struct uhci_hcd *uhci, struct urb *urb,
         if (list_empty(&qh->queue)) {
                 qh->iso_packet_desc = &urb->iso_frame_desc[0];
                 qh->iso_frame = urb->start_frame;
-                qh->iso_status = 0;
         }
 
         qh->skel = SKEL_ISO;
@@ -1361,22 +1359,18 @@ static int uhci_result_isochronous(struct uhci_hcd *uhci, struct urb *urb)
                         qh->iso_packet_desc->actual_length = actlength;
                         qh->iso_packet_desc->status = status;
                 }
-
-                if (status) {
+                if (status)
                         urb->error_count++;
-                        qh->iso_status = status;
-                }
 
                 uhci_remove_td_from_urbp(td);
                 uhci_free_td(uhci, td);
                 qh->iso_frame += qh->period;
                 ++qh->iso_packet_desc;
         }
-        return qh->iso_status;
+        return 0;
 }
 
 static int uhci_urb_enqueue(struct usb_hcd *hcd,
-                struct usb_host_endpoint *hep,
                 struct urb *urb, gfp_t mem_flags)
 {
         int ret;
@@ -1387,19 +1381,19 @@ static int uhci_urb_enqueue(struct usb_hcd *hcd,
 
         spin_lock_irqsave(&uhci->lock, flags);
 
-        ret = urb->status;
-        if (ret != -EINPROGRESS)                /* URB already unlinked! */
-                goto done;
+        ret = usb_hcd_link_urb_to_ep(hcd, urb);
+        if (ret)
+                goto done_not_linked;
 
         ret = -ENOMEM;
         urbp = uhci_alloc_urb_priv(uhci, urb);
         if (!urbp)
                 goto done;
 
-        if (hep->hcpriv)
-                qh = (struct uhci_qh *) hep->hcpriv;
+        if (urb->ep->hcpriv)
+                qh = urb->ep->hcpriv;
         else {
-                qh = uhci_alloc_qh(uhci, urb->dev, hep);
+                qh = uhci_alloc_qh(uhci, urb->dev, urb->ep);
                 if (!qh)
                         goto err_no_qh;
         }
@@ -1440,27 +1434,29 @@ static int uhci_urb_enqueue(struct usb_hcd *hcd,
 err_submit_failed:
         if (qh->state == QH_STATE_IDLE)
                 uhci_make_qh_idle(uhci, qh);    /* Reclaim unused QH */
-
 err_no_qh:
         uhci_free_urb_priv(uhci, urbp);
-
 done:
+        if (ret)
+                usb_hcd_unlink_urb_from_ep(hcd, urb);
+done_not_linked:
         spin_unlock_irqrestore(&uhci->lock, flags);
         return ret;
 }
 
-static int uhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb)
+static int uhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
 {
         struct uhci_hcd *uhci = hcd_to_uhci(hcd);
         unsigned long flags;
-        struct urb_priv *urbp;
         struct uhci_qh *qh;
+        int rc;
 
         spin_lock_irqsave(&uhci->lock, flags);
-        urbp = urb->hcpriv;
-        if (!urbp)                      /* URB was never linked! */
+        rc = usb_hcd_check_unlink_urb(hcd, urb, status);
+        if (rc)
                 goto done;
-        qh = urbp->qh;
+
+        qh = ((struct urb_priv *) urb->hcpriv)->qh;
 
         /* Remove Isochronous TDs from the frame list ASAP */
         if (qh->type == USB_ENDPOINT_XFER_ISOC) {
@@ -1477,14 +1473,14 @@ static int uhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb)
 
 done:
         spin_unlock_irqrestore(&uhci->lock, flags);
-        return 0;
+        return rc;
 }
 
 /*
  * Finish unlinking an URB and give it back
  */
 static void uhci_giveback_urb(struct uhci_hcd *uhci, struct uhci_qh *qh,
-                struct urb *urb)
+                struct urb *urb, int status)
 __releases(uhci->lock)
 __acquires(uhci->lock)
 {
@@ -1497,13 +1493,6 @@ __acquires(uhci->lock)
                  * unlinked first.  Regardless, don't confuse people with a
                  * negative length. */
                 urb->actual_length = max(urb->actual_length, 0);
-
-                /* Report erroneous short transfers */
-                if (unlikely((urb->transfer_flags & URB_SHORT_NOT_OK) &&
-                                urb->actual_length <
-                                        urb->transfer_buffer_length &&
-                                urb->status == 0))
-                        urb->status = -EREMOTEIO;
         }
 
         /* When giving back the first URB in an Isochronous queue,
@@ -1516,7 +1505,6 @@ __acquires(uhci->lock)
 
                 qh->iso_packet_desc = &nurb->iso_frame_desc[0];
                 qh->iso_frame = nurb->start_frame;
-                qh->iso_status = 0;
         }
 
         /* Take the URB off the QH's queue.  If the queue is now empty,
@@ -1529,9 +1517,10 @@ __acquires(uhci->lock)
         }
 
         uhci_free_urb_priv(uhci, urbp);
+        usb_hcd_unlink_urb_from_ep(uhci_to_hcd(uhci), urb);
 
         spin_unlock(&uhci->lock);
-        usb_hcd_giveback_urb(uhci_to_hcd(uhci), urb);
+        usb_hcd_giveback_urb(uhci_to_hcd(uhci), urb, status);
         spin_lock(&uhci->lock);
 
         /* If the queue is now empty, we can unlink the QH and give up its
@@ -1567,24 +1556,17 @@ static void uhci_scan_qh(struct uhci_hcd *uhci, struct uhci_qh *qh)
                 if (status == -EINPROGRESS)
                         break;
 
-                spin_lock(&urb->lock);
-                if (urb->status == -EINPROGRESS)        /* Not dequeued */
-                        urb->status = status;
-                else
-                        status = ECONNRESET;            /* Not -ECONNRESET */
-                spin_unlock(&urb->lock);
-
                 /* Dequeued but completed URBs can't be given back unless
                  * the QH is stopped or has finished unlinking. */
-                if (status == ECONNRESET) {
+                if (urb->unlinked) {
                         if (QH_FINISHED_UNLINKING(qh))
                                 qh->is_stopped = 1;
                         else if (!qh->is_stopped)
                                 return;
                 }
 
-                uhci_giveback_urb(uhci, qh, urb);
-                if (status < 0 && qh->type != USB_ENDPOINT_XFER_ISOC)
+                uhci_giveback_urb(uhci, qh, urb, status);
+                if (status < 0)
                         break;
         }
 
@@ -1599,7 +1581,7 @@ static void uhci_scan_qh(struct uhci_hcd *uhci, struct uhci_qh *qh)
 restart:
         list_for_each_entry(urbp, &qh->queue, node) {
                 urb = urbp->urb;
-                if (urb->status != -EINPROGRESS) {
+                if (urb->unlinked) {
 
                         /* Fix up the TD links and save the toggles for
                          * non-Isochronous queues.  For Isochronous queues,
@@ -1608,7 +1590,7 @@ restart:
                                 qh->is_stopped = 0;
                                 return;
                         }
-                        uhci_giveback_urb(uhci, qh, urb);
+                        uhci_giveback_urb(uhci, qh, urb, 0);
                         goto restart;
                 }
         }
diff --git a/drivers/usb/misc/adutux.c b/drivers/usb/misc/adutux.c
index e9fdbc8997b3..5131cbfb2f52 100644
--- a/drivers/usb/misc/adutux.c
+++ b/drivers/usb/misc/adutux.c
@@ -188,7 +188,8 @@ static void adu_interrupt_in_callback(struct urb *urb)
         spin_lock(&dev->buflock);
 
         if (status != 0) {
-                if ((status != -ENOENT) && (status != -ECONNRESET)) {
+                if ((status != -ENOENT) && (status != -ECONNRESET) &&
+                        (status != -ESHUTDOWN)) {
                         dbg(1," %s : nonzero status received: %d",
                             __FUNCTION__, status);
                 }
diff --git a/drivers/usb/misc/berry_charge.c b/drivers/usb/misc/berry_charge.c
index 92c1d2768df9..24e2dc3148a4 100644
--- a/drivers/usb/misc/berry_charge.c
+++ b/drivers/usb/misc/berry_charge.c
@@ -71,7 +71,7 @@ static int magic_charge(struct usb_device *udev)
         if (retval != 2) {
                 dev_err(&udev->dev, "First magic command failed: %d.\n",
                         retval);
-                return retval;
+                goto exit;
         }
 
         dbg(&udev->dev, "Sending second magic command\n");
@@ -80,7 +80,7 @@ static int magic_charge(struct usb_device *udev)
         if (retval != 0) {
                 dev_err(&udev->dev, "Second magic command failed: %d.\n",
                         retval);
-                return retval;
+                goto exit;
         }
 
         dbg(&udev->dev, "Calling set_configuration\n");
@@ -88,6 +88,8 @@ static int magic_charge(struct usb_device *udev)
         if (retval)
                 dev_err(&udev->dev, "Set Configuration failed :%d.\n", retval);
 
+exit:
+        kfree(dummy_buffer);
         return retval;
 }
 
@@ -112,6 +114,7 @@ static int magic_dual_mode(struct usb_device *udev)
         if (retval)
                 dev_err(&udev->dev, "Set Configuration failed :%d.\n", retval);
 
+        kfree(dummy_buffer);
         return retval;
 }
 
diff --git a/drivers/usb/misc/ftdi-elan.c b/drivers/usb/misc/ftdi-elan.c
index 538b535e955b..d3d8cd6ff103 100644
--- a/drivers/usb/misc/ftdi-elan.c
+++ b/drivers/usb/misc/ftdi-elan.c
@@ -2777,12 +2777,14 @@ static int ftdi_elan_probe(struct usb_interface *interface,
         size_t buffer_size;
         int i;
         int retval = -ENOMEM;
-        struct usb_ftdi *ftdi = kmalloc(sizeof(struct usb_ftdi), GFP_KERNEL);
-        if (ftdi == NULL) {
+        struct usb_ftdi *ftdi;
+
+        ftdi = kzalloc(sizeof(struct usb_ftdi), GFP_KERNEL);
+        if (!ftdi) {
                 printk(KERN_ERR "Out of memory\n");
                 return -ENOMEM;
         }
-        memset(ftdi, 0x00, sizeof(struct usb_ftdi));
+
         mutex_lock(&ftdi_module_lock);
         list_add_tail(&ftdi->ftdi_list, &ftdi_static_list);
         ftdi->sequence_num = ++ftdi_instances;
diff --git a/drivers/usb/misc/sisusbvga/sisusb.c b/drivers/usb/misc/sisusbvga/sisusb.c
index 9f37ba44c132..9244d067cec1 100644
--- a/drivers/usb/misc/sisusbvga/sisusb.c
+++ b/drivers/usb/misc/sisusbvga/sisusb.c
@@ -32,7 +32,7 @@
  * * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
  * * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  *
- * Author:      Thomas Winischhofer <thomas@winischhofer.net>
+ * Author:      Thomas Winischhofer <thomas@winischhofer.net>
  *
  */
 
@@ -962,12 +962,12 @@ static int sisusb_write_mem_bulk(struct sisusb_usb_data *sisusb, u32 addr,
                            packet.address = 0x00000194;
                            packet.data    = addr;
                            ret = sisusb_send_bridge_packet(sisusb, 10,
-                                                                &packet, 0);
+                                                                &packet, 0);
                            packet.header  = 0x001f;
                            packet.address = 0x00000190;
                            packet.data    = (length & ~3);
                            ret |= sisusb_send_bridge_packet(sisusb, 10,
-                                                                &packet, 0);
+                                                                &packet, 0);
                            if (sisusb->flagb0 != 0x16) {
                                 packet.header  = 0x001f;
                                 packet.address = 0x00000180;
@@ -1003,23 +1003,17 @@ static int sisusb_write_mem_bulk(struct sisusb_usb_data *sisusb, u32 addr,
                         if (ret) {
                                 msgcount++;
                                 if (msgcount < 500)
-                                        printk(KERN_ERR
-                                                "sisusbvga[%d]: Wrote %zd of "
-                                                "%d bytes, error %d\n",
-                                                sisusb->minor, *bytes_written,
-                                                length, ret);
+                                        dev_err(&sisusb->sisusb_dev->dev, "Wrote %zd of %d bytes, error %d\n",
+                                                *bytes_written, length, ret);
                                 else if (msgcount == 500)
-                                        printk(KERN_ERR
-                                                "sisusbvga[%d]: Too many errors"
-                                                ", logging stopped\n",
-                                                sisusb->minor);
+                                        dev_err(&sisusb->sisusb_dev->dev, "Too many errors, logging stopped\n");
                         }
                         addr += (*bytes_written);
                         length -= (*bytes_written);
             }
 
             if (ret)
-                break;
+                break;
 
         }
 
@@ -1261,51 +1255,10 @@ static int sisusb_read_mem_bulk(struct sisusb_usb_data *sisusb, u32 addr,
                                 addr += 4;
                                 length -= 4;
                         }
-#if 0           /* That does not work, as EP 2 is an OUT EP! */
-                default:
-                        CLEARPACKET(&packet);
-                        packet.header  = 0x001f;
-                        packet.address = 0x000001a0;
-                        packet.data    = 0x00000006;
-                        ret |= sisusb_send_bridge_packet(sisusb, 10,
-                                                                &packet, 0);
-                        packet.header  = 0x001f;
-                        packet.address = 0x000001b0;
-                        packet.data    = (length & ~3) | 0x40000000;
-                        ret |= sisusb_send_bridge_packet(sisusb, 10,
-                                                                &packet, 0);
-                        packet.header  = 0x001f;
-                        packet.address = 0x000001b4;
-                        packet.data    = addr;
-                        ret |= sisusb_send_bridge_packet(sisusb, 10,
-                                                                &packet, 0);
-                        packet.header  = 0x001f;
-                        packet.address = 0x000001a4;
-                        packet.data    = 0x00000001;
-                        ret |= sisusb_send_bridge_packet(sisusb, 10,
-                                                                &packet, 0);
-                        if (userbuffer) {
-                                ret |= sisusb_recv_bulk_msg(sisusb,
-                                                        SISUSB_EP_GFX_BULK_IN,
-                                                        (length & ~3),
-                                                        NULL, userbuffer,
-                                                        bytes_read, 0);
-                                if (!ret) userbuffer += (*bytes_read);
-                        } else {
-                                ret |= sisusb_recv_bulk_msg(sisusb,
-                                                        SISUSB_EP_GFX_BULK_IN,
-                                                        (length & ~3),
-                                                        kernbuffer, NULL,
-                                                        bytes_read, 0);
-                                if (!ret) kernbuffer += (*bytes_read);
-                        }
-                        addr += (*bytes_read);
-                        length -= (*bytes_read);
-#endif
             }
 
             if (ret)
-                break;
+                break;
         }
 
         return ret;
@@ -1401,22 +1354,6 @@ sisusb_readb(struct sisusb_usb_data *sisusb, u32 adr, u8 *data)
         return(sisusb_read_memio_byte(sisusb, SISUSB_TYPE_MEM, adr, data));
 }
 
-#if 0
-
-int
-sisusb_writew(struct sisusb_usb_data *sisusb, u32 adr, u16 data)
-{
-        return(sisusb_write_memio_word(sisusb, SISUSB_TYPE_MEM, adr, data));
-}
-
-int
-sisusb_readw(struct sisusb_usb_data *sisusb, u32 adr, u16 *data)
-{
-        return(sisusb_read_memio_word(sisusb, SISUSB_TYPE_MEM, adr, data));
-}
-
-#endif  /*  0  */
-
 int
 sisusb_copy_memory(struct sisusb_usb_data *sisusb, char *src,
                         u32 dest, int length, size_t *bytes_written)
@@ -1446,10 +1383,10 @@ sisusb_testreadwrite(struct sisusb_usb_data *sisusb)
     sisusb_copy_memory(sisusb, srcbuffer, sisusb->vrambase, 7, &dummy);
 
     for(i = 1; i <= 7; i++) {
-        printk(KERN_DEBUG "sisusb: rwtest %d bytes\n", i);
+        dev_dbg(&sisusb->sisusb_dev->dev, "sisusb: rwtest %d bytes\n", i);
         sisusb_read_memory(sisusb, destbuffer, sisusb->vrambase, i, &dummy);
         for(j = 0; j < i; j++) {
-             printk(KERN_DEBUG "sisusb: rwtest read[%d] = %x\n", j, destbuffer[j]);
+             dev_dbg(&sisusb->sisusb_dev->dev, "rwtest read[%d] = %x\n", j, destbuffer[j]);
         }
     }
 }
@@ -1533,9 +1470,9 @@ sisusb_clear_vram(struct sisusb_usb_data *sisusb, u32 address, int length)
 #define SETIREGAND(r,i,a)       sisusb_setidxregand(sisusb, r, i, a)
 #define SETIREGANDOR(r,i,a,o)   sisusb_setidxregandor(sisusb, r, i, a, o)
 #define READL(a,d)      sisusb_read_memio_long(sisusb, SISUSB_TYPE_MEM, a, d)
-#define WRITEL(a,d)     sisusb_write_memio_long(sisusb, SISUSB_TYPE_MEM, a, d)
+#define WRITEL(a,d)     sisusb_write_memio_long(sisusb, SISUSB_TYPE_MEM, a, d)
 #define READB(a,d)      sisusb_read_memio_byte(sisusb, SISUSB_TYPE_MEM, a, d)
-#define WRITEB(a,d)     sisusb_write_memio_byte(sisusb, SISUSB_TYPE_MEM, a, d)
+#define WRITEB(a,d)     sisusb_write_memio_byte(sisusb, SISUSB_TYPE_MEM, a, d)
 
 static int
 sisusb_triggersr16(struct sisusb_usb_data *sisusb, u8 ramtype)
@@ -2008,7 +1945,7 @@ sisusb_set_default_mode(struct sisusb_usb_data *sisusb, int touchengines)
                 SETIREG(SISSR, 0x26, 0x00);
         }
 
-        SETIREG(SISCR, 0x34, 0x44);     /* we just set std mode #44 */
+        SETIREG(SISCR, 0x34, 0x44);     /* we just set std mode #44 */
 
         return ret;
 }
@@ -2168,17 +2105,12 @@ sisusb_init_gfxcore(struct sisusb_usb_data *sisusb)
                 if (ramtype <= 1) {
                         ret |= sisusb_get_sdram_size(sisusb, &iret, bw, chab);
                         if (iret) {
-                                printk(KERN_ERR "sisusbvga[%d]: RAM size "
-                                        "detection failed, "
-                                        "assuming 8MB video RAM\n",
-                                        sisusb->minor);
+                                dev_err(&sisusb->sisusb_dev->dev,"RAM size detection failed, assuming 8MB video RAM\n");
                                 ret |= SETIREG(SISSR,0x14,0x31);
                                 /* TODO */
                         }
                 } else {
-                        printk(KERN_ERR "sisusbvga[%d]: DDR RAM device found, "
-                                        "assuming 8MB video RAM\n",
-                                        sisusb->minor);
+                        dev_err(&sisusb->sisusb_dev->dev, "DDR RAM device found, assuming 8MB video RAM\n");
                         ret |= SETIREG(SISSR,0x14,0x31);
                         /* *** TODO *** */
                 }
@@ -2249,8 +2181,7 @@ sisusb_get_ramconfig(struct sisusb_usb_data *sisusb)
                 break;
         }
 
-        printk(KERN_INFO "sisusbvga[%d]: %dMB %s %s, bus width %d\n",
-                        sisusb->minor, (sisusb->vramsize >> 20), ramtypetext1,
+        dev_info(&sisusb->sisusb_dev->dev, "%dMB %s %s, bus width %d\n", (sisusb->vramsize >> 20), ramtypetext1,
                         ramtypetext2[ramtype], bw);
 }
 
@@ -2509,11 +2440,8 @@ sisusb_open(struct inode *inode, struct file *file)
         struct usb_interface *interface;
         int subminor = iminor(inode);
 
-        if (!(interface = usb_find_interface(&sisusb_driver, subminor))) {
-                printk(KERN_ERR "sisusb[%d]: Failed to find interface\n",
-                                subminor);
+        if (!(interface = usb_find_interface(&sisusb_driver, subminor)))
                 return -ENODEV;
-        }
 
         if (!(sisusb = usb_get_intfdata(interface)))
                 return -ENODEV;
@@ -2534,18 +2462,12 @@ sisusb_open(struct inode *inode, struct file *file)
                 if (sisusb->sisusb_dev->speed == USB_SPEED_HIGH) {
                         if (sisusb_init_gfxdevice(sisusb, 0)) {
                                 mutex_unlock(&sisusb->lock);
-                                printk(KERN_ERR
-                                        "sisusbvga[%d]: Failed to initialize "
-                                        "device\n",
-                                        sisusb->minor);
+                                dev_err(&sisusb->sisusb_dev->dev, "Failed to initialize device\n");
                                 return -EIO;
                         }
                 } else {
                         mutex_unlock(&sisusb->lock);
-                        printk(KERN_ERR
-                                "sisusbvga[%d]: Device not attached to "
-                                "USB 2.0 hub\n",
-                                sisusb->minor);
+                        dev_err(&sisusb->sisusb_dev->dev, "Device not attached to USB 2.0 hub\n");
                         return -EIO;
                 }
         }
@@ -2586,7 +2508,6 @@ static int
 sisusb_release(struct inode *inode, struct file *file)
 {
         struct sisusb_usb_data *sisusb;
-        int myminor;
 
         if (!(sisusb = (struct sisusb_usb_data *)file->private_data))
                 return -ENODEV;
@@ -2599,8 +2520,6 @@ sisusb_release(struct inode *inode, struct file *file)
                         sisusb_kill_all_busy(sisusb);
         }
 
-        myminor = sisusb->minor;
-
         sisusb->isopen = 0;
         file->private_data = NULL;
 
@@ -2942,7 +2861,7 @@ static int
 sisusb_handle_command(struct sisusb_usb_data *sisusb, struct sisusb_command *y,
                                                         unsigned long arg)
 {
-        int     retval, port, length;
+        int     retval, port, length;
         u32     address;
 
         /* All our commands require the device
@@ -3065,12 +2984,12 @@ sisusb_handle_command(struct sisusb_usb_data *sisusb, struct sisusb_command *y,
 
 static int
 sisusb_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
-                                                        unsigned long arg)
+                                                        unsigned long arg)
 {
         struct sisusb_usb_data *sisusb;
         struct sisusb_info x;
         struct sisusb_command y;
-        int     retval = 0;
+        int     retval = 0;
         u32 __user *argp = (u32 __user *)arg;
 
         if (!(sisusb = (struct sisusb_usb_data *)file->private_data))
@@ -3095,7 +3014,7 @@ sisusb_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
 
                 case SISUSB_GET_CONFIG:
 
-                        x.sisusb_id         = SISUSB_ID;
+                        x.sisusb_id         = SISUSB_ID;
                         x.sisusb_version    = SISUSB_VERSION;
                         x.sisusb_revision   = SISUSB_REVISION;
                         x.sisusb_patchlevel = SISUSB_PATCHLEVEL;
@@ -3164,7 +3083,7 @@ static const struct file_operations usb_sisusb_fops = {
         .release =      sisusb_release,
         .read =         sisusb_read,
         .write =        sisusb_write,
-        .llseek =       sisusb_lseek,
+        .llseek =       sisusb_lseek,
 #ifdef SISUSB_NEW_CONFIG_COMPAT
         .compat_ioctl = sisusb_compat_ioctl,
 #endif
@@ -3183,17 +3102,13 @@ static int sisusb_probe(struct usb_interface *intf,
         struct usb_device *dev = interface_to_usbdev(intf);
         struct sisusb_usb_data *sisusb;
         int retval = 0, i;
-        const char *memfail =
-                KERN_ERR
-                "sisusbvga[%d]: Failed to allocate memory for %s buffer\n";
 
-        printk(KERN_INFO "sisusb: USB2VGA dongle found at address %d\n",
+        dev_info(&dev->dev, "USB2VGA dongle found at address %d\n",
                 dev->devnum);
 
         /* Allocate memory for our private */
         if (!(sisusb = kzalloc(sizeof(*sisusb), GFP_KERNEL))) {
-                printk(KERN_ERR
-                        "sisusb: Failed to allocate memory for private data\n");
+                dev_err(&sisusb->sisusb_dev->dev, "Failed to allocate memory for private data\n");
                 return -ENOMEM;
         }
         kref_init(&sisusb->kref);
@@ -3202,8 +3117,7 @@ static int sisusb_probe(struct usb_interface *intf,
 
         /* Register device */
         if ((retval = usb_register_dev(intf, &usb_sisusb_class))) {
-                printk(KERN_ERR
-                        "sisusb: Failed to get a minor for device %d\n",
+                dev_err(&sisusb->sisusb_dev->dev, "Failed to get a minor for device %d\n",
                         dev->devnum);
                 retval = -ENODEV;
                 goto error_1;
@@ -3221,7 +3135,7 @@ static int sisusb_probe(struct usb_interface *intf,
         sisusb->ibufsize = SISUSB_IBUF_SIZE;
         if (!(sisusb->ibuf = usb_buffer_alloc(dev, SISUSB_IBUF_SIZE,
                                         GFP_KERNEL, &sisusb->transfer_dma_in))) {
-                printk(memfail, "input", sisusb->minor);
+                dev_err(&sisusb->sisusb_dev->dev, "Failed to allocate memory for input buffer");
                 retval = -ENOMEM;
                 goto error_2;
         }
@@ -3233,7 +3147,7 @@ static int sisusb_probe(struct usb_interface *intf,
                                         GFP_KERNEL,
                                         &sisusb->transfer_dma_out[i]))) {
                         if (i == 0) {
-                                printk(memfail, "output", sisusb->minor);
+                                dev_err(&sisusb->sisusb_dev->dev, "Failed to allocate memory for output buffer\n");
                                 retval = -ENOMEM;
                                 goto error_3;
                         }
@@ -3245,9 +3159,7 @@ static int sisusb_probe(struct usb_interface *intf,
 
         /* Allocate URBs */
         if (!(sisusb->sisurbin = usb_alloc_urb(0, GFP_KERNEL))) {
-                printk(KERN_ERR
-                        "sisusbvga[%d]: Failed to allocate URBs\n",
-                        sisusb->minor);
+                dev_err(&sisusb->sisusb_dev->dev, "Failed to allocate URBs\n");
                 retval = -ENOMEM;
                 goto error_3;
         }
@@ -3255,9 +3167,7 @@ static int sisusb_probe(struct usb_interface *intf,
 
         for (i = 0; i < sisusb->numobufs; i++) {
                 if (!(sisusb->sisurbout[i] = usb_alloc_urb(0, GFP_KERNEL))) {
-                        printk(KERN_ERR
-                                "sisusbvga[%d]: Failed to allocate URBs\n",
-                                sisusb->minor);
+                        dev_err(&sisusb->sisusb_dev->dev, "Failed to allocate URBs\n");
                         retval = -ENOMEM;
                         goto error_4;
                 }
@@ -3266,15 +3176,12 @@ static int sisusb_probe(struct usb_interface *intf,
                 sisusb->urbstatus[i] = 0;
         }
 
-        printk(KERN_INFO "sisusbvga[%d]: Allocated %d output buffers\n",
-                                        sisusb->minor, sisusb->numobufs);
+        dev_info(&sisusb->sisusb_dev->dev, "Allocated %d output buffers\n", sisusb->numobufs);
 
 #ifdef INCL_SISUSB_CON
         /* Allocate our SiS_Pr */
         if (!(sisusb->SiS_Pr = kmalloc(sizeof(struct SiS_Private), GFP_KERNEL))) {
-                printk(KERN_ERR
-                        "sisusbvga[%d]: Failed to allocate SiS_Pr\n",
-                        sisusb->minor);
+                dev_err(&sisusb->sisusb_dev->dev, "Failed to allocate SiS_Pr\n");
         }
 #endif
 
@@ -3296,10 +3203,7 @@ static int sisusb_probe(struct usb_interface *intf,
         ret |= register_ioctl32_conversion(SISUSB_GET_CONFIG,      NULL);
         ret |= register_ioctl32_conversion(SISUSB_COMMAND,         NULL);
         if (ret)
-                printk(KERN_ERR
-                        "sisusbvga[%d]: Error registering ioctl32 "
-                        "translations\n",
-                        sisusb->minor);
+                dev_err(&sisusb->sisusb_dev->dev, "Error registering ioctl32 translations\n");
         else
                 sisusb->ioctl32registered = 1;
         }
@@ -3315,23 +3219,17 @@ static int sisusb_probe(struct usb_interface *intf,
                         initscreen = 0;
 #endif
                 if (sisusb_init_gfxdevice(sisusb, initscreen))
-                        printk(KERN_ERR
-                                "sisusbvga[%d]: Failed to early "
-                                "initialize device\n",
-                                sisusb->minor);
+                        dev_err(&sisusb->sisusb_dev->dev, "Failed to early initialize device\n");
 
         } else
-                printk(KERN_INFO
-                        "sisusbvga[%d]: Not attached to USB 2.0 hub, "
-                        "deferring init\n",
-                        sisusb->minor);
+                dev_info(&sisusb->sisusb_dev->dev, "Not attached to USB 2.0 hub, deferring init\n");
 
         sisusb->ready = 1;
 
 #ifdef SISUSBENDIANTEST
-        printk(KERN_DEBUG "sisusb: *** RWTEST ***\n");
+        dev_dbg(&sisusb->sisusb_dev->dev, "*** RWTEST ***\n");
         sisusb_testreadwrite(sisusb);
-        printk(KERN_DEBUG "sisusb: *** RWTEST END ***\n");
+        dev_dbg(&sisusb->sisusb_dev->dev, "*** RWTEST END ***\n");
 #endif
 
 #ifdef INCL_SISUSB_CON
@@ -3354,7 +3252,6 @@ error_1:
 static void sisusb_disconnect(struct usb_interface *intf)
 {
         struct sisusb_usb_data *sisusb;
-        int minor;
 
         /* This should *not* happen */
         if (!(sisusb = usb_get_intfdata(intf)))
@@ -3364,8 +3261,6 @@ static void sisusb_disconnect(struct usb_interface *intf)
         sisusb_console_exit(sisusb);
 #endif
 
-        minor = sisusb->minor;
-
         usb_deregister_dev(intf, &usb_sisusb_class);
 
         mutex_lock(&sisusb->lock);
@@ -3384,10 +3279,7 @@ static void sisusb_disconnect(struct usb_interface *intf)
                 ret |= unregister_ioctl32_conversion(SISUSB_GET_CONFIG);
                 ret |= unregister_ioctl32_conversion(SISUSB_COMMAND);
                 if (ret) {
-                        printk(KERN_ERR
-                                "sisusbvga[%d]: Error unregistering "
-                                "ioctl32 translations\n",
-                                minor);
+                        dev_err(&sisusb->sisusb_dev->dev, "Error unregistering ioctl32 translations\n");
                 }
         }
 #endif
@@ -3400,10 +3292,11 @@ static void sisusb_disconnect(struct usb_interface *intf)
         /* decrement our usage count */
         kref_put(&sisusb->kref, sisusb_delete);
 
-        printk(KERN_INFO "sisusbvga[%d]: Disconnected\n", minor);
+        dev_info(&sisusb->sisusb_dev->dev, "Disconnected\n");
 }
 
 static struct usb_device_id sisusb_table [] = {
+        { USB_DEVICE(0x0711, 0x0550) },
         { USB_DEVICE(0x0711, 0x0900) },
         { USB_DEVICE(0x0711, 0x0901) },
         { USB_DEVICE(0x0711, 0x0902) },
@@ -3423,22 +3316,12 @@ static struct usb_driver sisusb_driver = {
 
 static int __init usb_sisusb_init(void)
 {
-        int retval;
 
 #ifdef INCL_SISUSB_CON
         sisusb_init_concode();
 #endif
 
-        if (!(retval = usb_register(&sisusb_driver))) {
-
-                printk(KERN_INFO "sisusb: Driver version %d.%d.%d\n",
-                        SISUSB_VERSION, SISUSB_REVISION, SISUSB_PATCHLEVEL);
-                printk(KERN_INFO
-                        "sisusb: Copyright (C) 2005 Thomas Winischhofer\n");
-
-        }
-
-        return retval;
+        return usb_register(&sisusb_driver);
 }
 
 static void __exit usb_sisusb_exit(void)
diff --git a/drivers/usb/misc/sisusbvga/sisusb.h b/drivers/usb/misc/sisusbvga/sisusb.h
index 8e1120a64806..d2d7872cd022 100644
--- a/drivers/usb/misc/sisusbvga/sisusb.h
+++ b/drivers/usb/misc/sisusbvga/sisusb.h
@@ -8,29 +8,29 @@
  *
  * Otherwise, the following license terms apply:
  *
- * * Redistribution and use in source and binary forms, with or without
- * * modification, are permitted provided that the following conditions
- * * are met:
- * * 1) Redistributions of source code must retain the above copyright
- * *    notice, this list of conditions and the following disclaimer.
- * * 2) Redistributions in binary form must reproduce the above copyright
- * *    notice, this list of conditions and the following disclaimer in the
- * *    documentation and/or other materials provided with the distribution.
- * * 3) The name of the author may not be used to endorse or promote products
- * *    derived from this software without specific prior written permission.
- * *
- * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESSED OR
- * * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
- * * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
- * * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1) Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2) Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3) The name of the author may not be used to endorse or promote products
+ *    derived from this software without specific prior written permission.
  *
- * Author:      Thomas Winischhofer <thomas@winischhofer.net>
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESSED OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * Author:      Thomas Winischhofer <thomas@winischhofer.net>
  *
  */
 
@@ -44,16 +44,14 @@
 #include <linux/mutex.h>
 
 /* For older kernels, support for text consoles is by default
- * off. To ensable text console support, change the following:
+ * off. To enable text console support, change the following:
  */
-#if 0
-#define CONFIG_USB_SISUSBVGA_CON
-#endif
+/* #define CONFIG_USB_SISUSBVGA_CON */
 
 /* Version Information */
 
 #define SISUSB_VERSION          0
-#define SISUSB_REVISION         0
+#define SISUSB_REVISION         0
 #define SISUSB_PATCHLEVEL       8
 
 /* Include console and mode switching code? */
@@ -74,7 +72,7 @@
 #define SISUSB_IBUF_SIZE  0x01000
 #define SISUSB_OBUF_SIZE  0x10000       /* fixed */
 
-#define NUMOBUFS 8                      /* max number of output buffers/output URBs */
+#define NUMOBUFS 8              /* max number of output buffers/output URBs */
 
 /* About endianness:
  *
@@ -93,7 +91,7 @@
  */
 
 #ifdef __BIG_ENDIAN
-#define SISUSB_CORRECT_ENDIANNESS_PACKET(p)             \
+#define SISUSB_CORRECT_ENDIANNESS_PACKET(p)             \
         do {                                            \
                 p->header  = cpu_to_le16(p->header);    \
                 p->address = cpu_to_le32(p->address);   \
@@ -105,7 +103,7 @@
 
 struct sisusb_usb_data;
 
-struct sisusb_urb_context {             /* urb->context for outbound bulk URBs */
+struct sisusb_urb_context {     /* urb->context for outbound bulk URBs */
         struct sisusb_usb_data *sisusb;
         int urbindex;
         int *actual_length;
@@ -116,16 +114,16 @@ struct sisusb_usb_data {
         struct usb_interface *interface;
         struct kref kref;
         wait_queue_head_t wait_q;       /* for syncind and timeouts */
-        struct mutex lock;              /* general race avoidance */
-        unsigned int ifnum;             /* interface number of the USB device */
-        int minor;                      /* minor (for logging clarity) */
-        int isopen;                     /* !=0 if open */
-        int present;                    /* !=0 if device is present on the bus */
-        int ready;                      /* !=0 if device is ready for userland */
+        struct mutex lock;      /* general race avoidance */
+        unsigned int ifnum;     /* interface number of the USB device */
+        int minor;              /* minor (for logging clarity) */
+        int isopen;             /* !=0 if open */
+        int present;            /* !=0 if device is present on the bus */
+        int ready;              /* !=0 if device is ready for userland */
 #ifdef SISUSB_OLD_CONFIG_COMPAT
         int ioctl32registered;
 #endif
-        int numobufs;                   /* number of obufs = number of out urbs */
+        int numobufs;           /* number of obufs = number of out urbs */
         char *obuf[NUMOBUFS], *ibuf;    /* transfer buffers */
         int obufsize, ibufsize;
         dma_addr_t transfer_dma_out[NUMOBUFS];
@@ -136,13 +134,13 @@ struct sisusb_usb_data {
         unsigned char completein;
         struct sisusb_urb_context urbout_context[NUMOBUFS];
         unsigned long flagb0;
-        unsigned long vrambase;         /* framebuffer base */
-        unsigned int vramsize;          /* framebuffer size (bytes) */
+        unsigned long vrambase; /* framebuffer base */
+        unsigned int vramsize;  /* framebuffer size (bytes) */
         unsigned long mmiobase;
         unsigned int mmiosize;
         unsigned long ioportbase;
-        unsigned char devinit;          /* device initialized? */
-        unsigned char gfxinit;          /* graphics core initialized? */
+        unsigned char devinit;  /* device initialized? */
+        unsigned char gfxinit;  /* graphics core initialized? */
         unsigned short chipid, chipvendor;
         unsigned short chiprevision;
 #ifdef INCL_SISUSB_CON
@@ -152,7 +150,7 @@ struct sisusb_usb_data {
         int haveconsole, con_first, con_last;
         int havethisconsole[MAX_NR_CONSOLES];
         int textmodedestroyed;
-        unsigned int sisusb_num_columns; /* real number, not vt's idea */
+        unsigned int sisusb_num_columns;        /* real number, not vt's idea */
         int cur_start_addr, con_rolled_over;
         int sisusb_cursor_loc, bad_cursor_pos;
         int sisusb_cursor_size_from;
@@ -197,7 +195,7 @@ struct sisusb_packet {
         unsigned short header;
         u32 address;
         u32 data;
-} __attribute__((__packed__));
+} __attribute__ ((__packed__));
 
 #define CLEARPACKET(packet) memset(packet, 0, 10)
 
@@ -265,36 +263,36 @@ struct sisusb_packet {
 
 /* Structure argument for SISUSB_GET_INFO ioctl  */
 struct sisusb_info {
-        __u32   sisusb_id;              /* for identifying sisusb */
-#define SISUSB_ID  0x53495355           /* Identify myself with 'SISU' */
-        __u8    sisusb_version;
-        __u8    sisusb_revision;
-        __u8    sisusb_patchlevel;
-        __u8    sisusb_gfxinit;         /* graphics core initialized? */
+        __u32 sisusb_id;        /* for identifying sisusb */
+#define SISUSB_ID  0x53495355   /* Identify myself with 'SISU' */
+        __u8 sisusb_version;
+        __u8 sisusb_revision;
+        __u8 sisusb_patchlevel;
+        __u8 sisusb_gfxinit;    /* graphics core initialized? */
 
-        __u32   sisusb_vrambase;
-        __u32   sisusb_mmiobase;
-        __u32   sisusb_iobase;
-        __u32   sisusb_pcibase;
+        __u32 sisusb_vrambase;
+        __u32 sisusb_mmiobase;
+        __u32 sisusb_iobase;
+        __u32 sisusb_pcibase;
 
-        __u32   sisusb_vramsize;        /* framebuffer size in bytes */
+        __u32 sisusb_vramsize;  /* framebuffer size in bytes */
 
-        __u32   sisusb_minor;
+        __u32 sisusb_minor;
 
-        __u32   sisusb_fbdevactive;     /* != 0 if framebuffer device active */
+        __u32 sisusb_fbdevactive;       /* != 0 if framebuffer device active */
 
-        __u32   sisusb_conactive;       /* != 0 if console driver active */
+        __u32 sisusb_conactive; /* != 0 if console driver active */
 
-        __u8    sisusb_reserved[28];    /* for future use */
+        __u8 sisusb_reserved[28];       /* for future use */
 };
 
 struct sisusb_command {
-        __u8   operation;       /* see below */
-        __u8   data0;           /* operation dependent */
-        __u8   data1;           /* operation dependent */
-        __u8   data2;           /* operation dependent */
-        __u32  data3;           /* operation dependent */
-        __u32  data4;           /* for future use */
+        __u8 operation;         /* see below */
+        __u8 data0;             /* operation dependent */
+        __u8 data1;             /* operation dependent */
+        __u8 data2;             /* operation dependent */
+        __u32 data3;            /* operation dependent */
+        __u32 data4;            /* for future use */
 };
 
 #define SUCMD_GET       0x01    /* for all: data0 = index, data3 = port */
@@ -306,7 +304,7 @@ struct sisusb_command {
 
 #define SUCMD_CLRSCR    0x07    /* data0:1:2 = length, data3 = address */
 
-#define SUCMD_HANDLETEXTMODE 0x08 /* Reset/destroy text mode */
+#define SUCMD_HANDLETEXTMODE 0x08       /* Reset/destroy text mode */
 
 #define SUCMD_SETMODE   0x09    /* Set a display mode (data3 = SiS mode) */
 #define SUCMD_SETVESAMODE 0x0a  /* Set a display mode (data3 = VESA mode) */
@@ -315,6 +313,4 @@ struct sisusb_command {
 #define SISUSB_GET_CONFIG_SIZE  _IOR(0xF3,0x3E,__u32)
 #define SISUSB_GET_CONFIG       _IOR(0xF3,0x3F,struct sisusb_info)
 
-
 #endif /* SISUSB_H */
-
diff --git a/drivers/usb/misc/sisusbvga/sisusb_con.c b/drivers/usb/misc/sisusbvga/sisusb_con.c
index 8d0edc867f33..43722e5a49d1 100644
--- a/drivers/usb/misc/sisusbvga/sisusb_con.c
+++ b/drivers/usb/misc/sisusbvga/sisusb_con.c
@@ -52,6 +52,7 @@
 #include <linux/kernel.h>
 #include <linux/signal.h>
 #include <linux/fs.h>
+#include <linux/usb.h>
 #include <linux/tty.h>
 #include <linux/console.h>
 #include <linux/string.h>
@@ -373,14 +374,6 @@ sisusbcon_putc(struct vc_data *c, int ch, int y, int x)
                 return;
 
         /* sisusb->lock is down */
-
-        /* Don't need to put the character into buffer ourselves,
-         * because the vt does this BEFORE calling us.
-         */
-#if 0
-        sisusbcon_writew(ch, SISUSB_VADDR(x, y));
-#endif
-
         if (sisusb_is_inactive(c, sisusb)) {
                 mutex_unlock(&sisusb->lock);
                 return;
@@ -490,10 +483,6 @@ sisusbcon_bmove(struct vc_data *c, int sy, int sx,
         struct sisusb_usb_data *sisusb;
         ssize_t written;
         int cols, length;
-#if 0
-        u16 *src, *dest;
-        int i;
-#endif
 
         if (width <= 0 || height <= 0)
                 return;
@@ -505,41 +494,6 @@ sisusbcon_bmove(struct vc_data *c, int sy, int sx,
 
         cols = sisusb->sisusb_num_columns;
 
-        /* Don't need to move data outselves, because
-         * vt does this BEFORE calling us.
-         * This is only used by vt's insert/deletechar.
-         */
-#if 0
-        if (sx == 0 && dx == 0 && width >= c->vc_cols && width <= cols) {
-
-                sisusbcon_memmovew(SISUSB_VADDR(0, dy), SISUSB_VADDR(0, sy),
-                                        height * width * 2);
-
-        } else if (dy < sy || (dy == sy && dx < sx)) {
-
-                src  = SISUSB_VADDR(sx, sy);
-                dest = SISUSB_VADDR(dx, dy);
-
-                for (i = height; i > 0; i--) {
-                        sisusbcon_memmovew(dest, src, width * 2);
-                        src  += cols;
-                        dest += cols;
-                }
-
-        } else {
-
-                src  = SISUSB_VADDR(sx, sy + height - 1);
-                dest = SISUSB_VADDR(dx, dy + height - 1);
-
-                for (i = height; i > 0; i--) {
-                        sisusbcon_memmovew(dest, src, width * 2);
-                        src  -= cols;
-                        dest -= cols;
-                }
-
-        }
-#endif
-
         if (sisusb_is_inactive(c, sisusb)) {
                 mutex_unlock(&sisusb->lock);
                 return;
@@ -584,7 +538,7 @@ sisusbcon_switch(struct vc_data *c)
          */
         if (c->vc_origin == (unsigned long)c->vc_screenbuf) {
                 mutex_unlock(&sisusb->lock);
-                printk(KERN_DEBUG "sisusb: ASSERT ORIGIN != SCREENBUF!\n");
+                dev_dbg(&sisusb->sisusb_dev->dev, "ASSERT ORIGIN != SCREENBUF!\n");
                 return 0;
         }
 
@@ -1475,7 +1429,7 @@ static const struct consw sisusb_dummy_con = {
 int
 sisusb_console_init(struct sisusb_usb_data *sisusb, int first, int last)
 {
-        int i, ret, minor = sisusb->minor;
+        int i, ret;
 
         mutex_lock(&sisusb->lock);
 
@@ -1508,9 +1462,7 @@ sisusb_console_init(struct sisusb_usb_data *sisusb, int first, int last)
         /* Set up text mode (and upload  default font) */
         if (sisusb_reset_text_mode(sisusb, 1)) {
                 mutex_unlock(&sisusb->lock);
-                printk(KERN_ERR
-                        "sisusbvga[%d]: Failed to set up text mode\n",
-                        minor);
+                dev_err(&sisusb->sisusb_dev->dev, "Failed to set up text mode\n");
                 return 1;
         }
 
@@ -1531,9 +1483,7 @@ sisusb_console_init(struct sisusb_usb_data *sisusb, int first, int last)
         /* Allocate screen buffer */
         if (!(sisusb->scrbuf = (unsigned long)vmalloc(sisusb->scrbuf_size))) {
                 mutex_unlock(&sisusb->lock);
-                printk(KERN_ERR
-                        "sisusbvga[%d]: Failed to allocate screen buffer\n",
-                        minor);
+                dev_err(&sisusb->sisusb_dev->dev, "Failed to allocate screen buffer\n");
                 return 1;
         }
 
diff --git a/drivers/usb/misc/sisusbvga/sisusb_init.c b/drivers/usb/misc/sisusbvga/sisusb_init.c
index 9b30f8962814..273de5d0934e 100644
--- a/drivers/usb/misc/sisusbvga/sisusb_init.c
+++ b/drivers/usb/misc/sisusbvga/sisusb_init.c
@@ -32,7 +32,7 @@
  * * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
  * * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  *
- * Author:      Thomas Winischhofer <thomas@winischhofer.net>
+ * Author:      Thomas Winischhofer <thomas@winischhofer.net>
  *
  */
 
@@ -55,109 +55,18 @@
 /*         POINTER INITIALIZATION            */
 /*********************************************/
 
-static void
-SiSUSB_InitPtr(struct SiS_Private *SiS_Pr)
+static void SiSUSB_InitPtr(struct SiS_Private *SiS_Pr)
 {
-        SiS_Pr->SiS_ModeResInfo   = SiSUSB_ModeResInfo;
-        SiS_Pr->SiS_StandTable    = SiSUSB_StandTable;
-
-        SiS_Pr->SiS_SModeIDTable  = SiSUSB_SModeIDTable;
-        SiS_Pr->SiS_EModeIDTable  = SiSUSB_EModeIDTable;
-        SiS_Pr->SiS_RefIndex      = SiSUSB_RefIndex;
-        SiS_Pr->SiS_CRT1Table     = SiSUSB_CRT1Table;
-
-        SiS_Pr->SiS_VCLKData      = SiSUSB_VCLKData;
-}
-
-/*********************************************/
-/*            HELPER: Get ModeID             */
-/*********************************************/
+        SiS_Pr->SiS_ModeResInfo = SiSUSB_ModeResInfo;
+        SiS_Pr->SiS_StandTable = SiSUSB_StandTable;
 
-#if 0
-unsigned short
-SiSUSB_GetModeID(int HDisplay, int VDisplay, int Depth)
-{
-        unsigned short ModeIndex = 0;
-
-        switch (HDisplay)
-        {
-                case 320:
-                        if (VDisplay == 200)
-                                ModeIndex = ModeIndex_320x200[Depth];
-                        else if (VDisplay == 240)
-                                ModeIndex = ModeIndex_320x240[Depth];
-                        break;
-                case 400:
-                        if (VDisplay == 300)
-                                ModeIndex = ModeIndex_400x300[Depth];
-                        break;
-                case 512:
-                        if (VDisplay == 384)
-                                ModeIndex = ModeIndex_512x384[Depth];
-                        break;
-                case 640:
-                        if (VDisplay == 480)
-                                ModeIndex = ModeIndex_640x480[Depth];
-                        else if (VDisplay == 400)
-                                ModeIndex = ModeIndex_640x400[Depth];
-                        break;
-                case 720:
-                        if (VDisplay == 480)
-                                ModeIndex = ModeIndex_720x480[Depth];
-                        else if (VDisplay == 576)
-                                ModeIndex = ModeIndex_720x576[Depth];
-                        break;
-                case 768:
-                        if (VDisplay == 576)
-                                ModeIndex = ModeIndex_768x576[Depth];
-                        break;
-                case 800:
-                        if (VDisplay == 600)
-                                ModeIndex = ModeIndex_800x600[Depth];
-                        else if (VDisplay == 480)
-                                ModeIndex = ModeIndex_800x480[Depth];
-                        break;
-                case 848:
-                        if (VDisplay == 480)
-                                ModeIndex = ModeIndex_848x480[Depth];
-                        break;
-                case 856:
-                        if (VDisplay == 480)
-                                ModeIndex = ModeIndex_856x480[Depth];
-                        break;
-                case 960:
-                        if (VDisplay == 540)
-                                ModeIndex = ModeIndex_960x540[Depth];
-                        else if (VDisplay == 600)
-                                ModeIndex = ModeIndex_960x600[Depth];
-                        break;
-                case 1024:
-                        if (VDisplay == 576)
-                                ModeIndex = ModeIndex_1024x576[Depth];
-                        else if (VDisplay == 768)
-                                ModeIndex = ModeIndex_1024x768[Depth];
-                        break;
-                case 1152:
-                        if (VDisplay == 864)
-                                ModeIndex = ModeIndex_1152x864[Depth];
-                        break;
-                case 1280:
-                        switch (VDisplay) {
-                                case 720:
-                                        ModeIndex = ModeIndex_1280x720[Depth];
-                                        break;
-                                case 768:
-                                        ModeIndex = ModeIndex_1280x768[Depth];
-                                        break;
-                                case 1024:
-                                        ModeIndex = ModeIndex_1280x1024[Depth];
-                                        break;
-                        }
-        }
+        SiS_Pr->SiS_SModeIDTable = SiSUSB_SModeIDTable;
+        SiS_Pr->SiS_EModeIDTable = SiSUSB_EModeIDTable;
+        SiS_Pr->SiS_RefIndex = SiSUSB_RefIndex;
+        SiS_Pr->SiS_CRT1Table = SiSUSB_CRT1Table;
 
-        return ModeIndex;
+        SiS_Pr->SiS_VCLKData = SiSUSB_VCLKData;
 }
-#endif  /*  0  */
 
 /*********************************************/
 /*          HELPER: SetReg, GetReg           */
@@ -165,21 +74,20 @@ SiSUSB_GetModeID(int HDisplay, int VDisplay, int Depth)
 
 static void
 SiS_SetReg(struct SiS_Private *SiS_Pr, unsigned long port,
-                        unsigned short index, unsigned short data)
+           unsigned short index, unsigned short data)
 {
         sisusb_setidxreg(SiS_Pr->sisusb, port, index, data);
 }
 
 static void
 SiS_SetRegByte(struct SiS_Private *SiS_Pr, unsigned long port,
-                                                unsigned short data)
+               unsigned short data)
 {
         sisusb_setreg(SiS_Pr->sisusb, port, data);
 }
 
 static unsigned char
-SiS_GetReg(struct SiS_Private *SiS_Pr, unsigned long port,
-                                                unsigned short index)
+SiS_GetReg(struct SiS_Private *SiS_Pr, unsigned long port, unsigned short index)
 {
         u8 data;
 
@@ -200,22 +108,22 @@ SiS_GetRegByte(struct SiS_Private *SiS_Pr, unsigned long port)
 
 static void
 SiS_SetRegANDOR(struct SiS_Private *SiS_Pr, unsigned long port,
-                        unsigned short index, unsigned short DataAND,
-                                                unsigned short DataOR)
+                unsigned short index, unsigned short DataAND,
+                unsigned short DataOR)
 {
         sisusb_setidxregandor(SiS_Pr->sisusb, port, index, DataAND, DataOR);
 }
 
 static void
 SiS_SetRegAND(struct SiS_Private *SiS_Pr, unsigned long port,
-                        unsigned short index, unsigned short DataAND)
+              unsigned short index, unsigned short DataAND)
 {
         sisusb_setidxregand(SiS_Pr->sisusb, port, index, DataAND);
 }
 
 static void
-SiS_SetRegOR(struct SiS_Private *SiS_Pr,unsigned long port,
-                        unsigned short index, unsigned short DataOR)
+SiS_SetRegOR(struct SiS_Private *SiS_Pr, unsigned long port,
+             unsigned short index, unsigned short DataOR)
 {
         sisusb_setidxregor(SiS_Pr->sisusb, port, index, DataOR);
 }
@@ -224,8 +132,7 @@ SiS_SetRegOR(struct SiS_Private *SiS_Pr,unsigned long port,
 /*      HELPER: DisplayOn, DisplayOff        */
 /*********************************************/
 
-static void
-SiS_DisplayOn(struct SiS_Private *SiS_Pr)
+static void SiS_DisplayOn(struct SiS_Private *SiS_Pr)
 {
         SiS_SetRegAND(SiS_Pr, SiS_Pr->SiS_P3c4, 0x01, 0xDF);
 }
@@ -234,8 +141,7 @@ SiS_DisplayOn(struct SiS_Private *SiS_Pr)
 /*        HELPER: Init Port Addresses        */
 /*********************************************/
 
-static void
-SiSUSBRegInit(struct SiS_Private *SiS_Pr, unsigned long BaseAddr)
+static void SiSUSBRegInit(struct SiS_Private *SiS_Pr, unsigned long BaseAddr)
 {
         SiS_Pr->SiS_P3c4 = BaseAddr + 0x14;
         SiS_Pr->SiS_P3d4 = BaseAddr + 0x24;
@@ -258,8 +164,7 @@ SiSUSBRegInit(struct SiS_Private *SiS_Pr, unsigned long BaseAddr)
 /*             HELPER: GetSysFlags           */
 /*********************************************/
 
-static void
-SiS_GetSysFlags(struct SiS_Private *SiS_Pr)
+static void SiS_GetSysFlags(struct SiS_Private *SiS_Pr)
 {
         SiS_Pr->SiS_MyCR63 = 0x63;
 }
@@ -268,8 +173,7 @@ SiS_GetSysFlags(struct SiS_Private *SiS_Pr)
 /*         HELPER: Init PCI & Engines        */
 /*********************************************/
 
-static void
-SiSInitPCIetc(struct SiS_Private *SiS_Pr)
+static void SiSInitPCIetc(struct SiS_Private *SiS_Pr)
 {
         SiS_SetReg(SiS_Pr, SiS_Pr->SiS_P3c4, 0x20, 0xa1);
         /*  - Enable 2D (0x40)
@@ -285,8 +189,7 @@ SiSInitPCIetc(struct SiS_Private *SiS_Pr)
 /*        HELPER: SET SEGMENT REGISTERS      */
 /*********************************************/
 
-static void
-SiS_SetSegRegLower(struct SiS_Private *SiS_Pr, unsigned short value)
+static void SiS_SetSegRegLower(struct SiS_Private *SiS_Pr, unsigned short value)
 {
         unsigned short temp;
 
@@ -299,8 +202,7 @@ SiS_SetSegRegLower(struct SiS_Private *SiS_Pr, unsigned short value)
         SiS_SetRegByte(SiS_Pr, SiS_Pr->SiS_P3cd, temp);
 }
 
-static void
-SiS_SetSegRegUpper(struct SiS_Private *SiS_Pr, unsigned short value)
+static void SiS_SetSegRegUpper(struct SiS_Private *SiS_Pr, unsigned short value)
 {
         unsigned short temp;
 
@@ -313,15 +215,13 @@ SiS_SetSegRegUpper(struct SiS_Private *SiS_Pr, unsigned short value)
         SiS_SetRegByte(SiS_Pr, SiS_Pr->SiS_P3cd, temp);
 }
 
-static void
-SiS_SetSegmentReg(struct SiS_Private *SiS_Pr, unsigned short value)
+static void SiS_SetSegmentReg(struct SiS_Private *SiS_Pr, unsigned short value)
 {
         SiS_SetSegRegLower(SiS_Pr, value);
         SiS_SetSegRegUpper(SiS_Pr, value);
 }
 
-static void
-SiS_ResetSegmentReg(struct SiS_Private *SiS_Pr)
+static void SiS_ResetSegmentReg(struct SiS_Private *SiS_Pr)
 {
         SiS_SetSegmentReg(SiS_Pr, 0);
 }
@@ -337,14 +237,12 @@ SiS_SetSegmentRegOver(struct SiS_Private *SiS_Pr, unsigned short value)
         SiS_SetSegmentReg(SiS_Pr, value);
 }
 
-static void
-SiS_ResetSegmentRegOver(struct SiS_Private *SiS_Pr)
+static void SiS_ResetSegmentRegOver(struct SiS_Private *SiS_Pr)
 {
         SiS_SetSegmentRegOver(SiS_Pr, 0);
 }
 
-static void
-SiS_ResetSegmentRegisters(struct SiS_Private *SiS_Pr)
+static void SiS_ResetSegmentRegisters(struct SiS_Private *SiS_Pr)
 {
         SiS_ResetSegmentReg(SiS_Pr);
         SiS_ResetSegmentRegOver(SiS_Pr);
@@ -356,7 +254,7 @@ SiS_ResetSegmentRegisters(struct SiS_Private *SiS_Pr)
 
 static int
 SiS_SearchModeID(struct SiS_Private *SiS_Pr, unsigned short *ModeNo,
-                                                unsigned short *ModeIdIndex)
+                 unsigned short *ModeIdIndex)
 {
         if ((*ModeNo) <= 0x13) {
 
@@ -367,12 +265,14 @@ SiS_SearchModeID(struct SiS_Private *SiS_Pr, unsigned short *ModeNo,
 
         } else {
 
-                for(*ModeIdIndex = 0; ;(*ModeIdIndex)++) {
+                for (*ModeIdIndex = 0;; (*ModeIdIndex)++) {
 
-                        if (SiS_Pr->SiS_EModeIDTable[*ModeIdIndex].Ext_ModeID == (*ModeNo))
+                        if (SiS_Pr->SiS_EModeIDTable[*ModeIdIndex].Ext_ModeID ==
+                            (*ModeNo))
                                 break;
 
-                        if (SiS_Pr->SiS_EModeIDTable[*ModeIdIndex].Ext_ModeID == 0xFF)
+                        if (SiS_Pr->SiS_EModeIDTable[*ModeIdIndex].Ext_ModeID ==
+                            0xFF)
                                 return 0;
                 }
 
@@ -385,8 +285,7 @@ SiS_SearchModeID(struct SiS_Private *SiS_Pr, unsigned short *ModeNo,
 /*            HELPER: ENABLE CRT1            */
 /*********************************************/
 
-static void
-SiS_HandleCRT1(struct SiS_Private *SiS_Pr)
+static void SiS_HandleCRT1(struct SiS_Private *SiS_Pr)
 {
         /* Enable CRT1 gating */
         SiS_SetRegAND(SiS_Pr, SiS_Pr->SiS_P3d4, SiS_Pr->SiS_MyCR63, 0xbf);
@@ -398,9 +297,9 @@ SiS_HandleCRT1(struct SiS_Private *SiS_Pr)
 
 static unsigned short
 SiS_GetColorDepth(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
-                unsigned short ModeIdIndex)
+                  unsigned short ModeIdIndex)
 {
-        static const unsigned short ColorDepth[6] = { 1, 2, 4, 4, 6, 8};
+        static const unsigned short ColorDepth[6] = { 1, 2, 4, 4, 6, 8 };
         unsigned short modeflag;
         short index;
 
@@ -411,7 +310,8 @@ SiS_GetColorDepth(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
         }
 
         index = (modeflag & ModeTypeMask) - ModeEGA;
-        if (index < 0) index = 0;
+        if (index < 0)
+                index = 0;
         return ColorDepth[index];
 }
 
@@ -421,7 +321,7 @@ SiS_GetColorDepth(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
 
 static unsigned short
 SiS_GetOffset(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
-                unsigned short ModeIdIndex, unsigned short rrti)
+              unsigned short ModeIdIndex, unsigned short rrti)
 {
         unsigned short xres, temp, colordepth, infoflag;
 
@@ -458,8 +358,8 @@ SiS_SetSeqRegs(struct SiS_Private *SiS_Pr, unsigned short StandTableIndex)
         SRdata = SiS_Pr->SiS_StandTable[StandTableIndex].SR[0] | 0x20;
         SiS_SetReg(SiS_Pr, SiS_Pr->SiS_P3c4, 0x01, SRdata);
 
-        for(i = 2; i <= 4; i++) {
-                SRdata = SiS_Pr->SiS_StandTable[StandTableIndex].SR[i-1];
+        for (i = 2; i <= 4; i++) {
+                SRdata = SiS_Pr->SiS_StandTable[StandTableIndex].SR[i - 1];
                 SiS_SetReg(SiS_Pr, SiS_Pr->SiS_P3c4, i, SRdata);
         }
 }
@@ -488,7 +388,7 @@ SiS_SetCRTCRegs(struct SiS_Private *SiS_Pr, unsigned short StandTableIndex)
 
         SiS_SetRegAND(SiS_Pr, SiS_Pr->SiS_P3d4, 0x11, 0x7f);
 
-        for(i = 0; i <= 0x18; i++) {
+        for (i = 0; i <= 0x18; i++) {
                 CRTCdata = SiS_Pr->SiS_StandTable[StandTableIndex].CRTC[i];
                 SiS_SetReg(SiS_Pr, SiS_Pr->SiS_P3d4, i, CRTCdata);
         }
@@ -504,7 +404,7 @@ SiS_SetATTRegs(struct SiS_Private *SiS_Pr, unsigned short StandTableIndex)
         unsigned char ARdata;
         unsigned short i;
 
-        for(i = 0; i <= 0x13; i++) {
+        for (i = 0; i <= 0x13; i++) {
                 ARdata = SiS_Pr->SiS_StandTable[StandTableIndex].ATTR[i];
                 SiS_GetRegByte(SiS_Pr, SiS_Pr->SiS_P3da);
                 SiS_SetRegByte(SiS_Pr, SiS_Pr->SiS_P3c0, i);
@@ -529,7 +429,7 @@ SiS_SetGRCRegs(struct SiS_Private *SiS_Pr, unsigned short StandTableIndex)
         unsigned char GRdata;
         unsigned short i;
 
-        for(i = 0; i <= 0x08; i++) {
+        for (i = 0; i <= 0x08; i++) {
                 GRdata = SiS_Pr->SiS_StandTable[StandTableIndex].GRC[i];
                 SiS_SetReg(SiS_Pr, SiS_Pr->SiS_P3ce, i, GRdata);
         }
@@ -544,12 +444,11 @@ SiS_SetGRCRegs(struct SiS_Private *SiS_Pr, unsigned short StandTableIndex)
 /*          CLEAR EXTENDED REGISTERS         */
 /*********************************************/
 
-static void
-SiS_ClearExt1Regs(struct SiS_Private *SiS_Pr, unsigned short ModeNo)
+static void SiS_ClearExt1Regs(struct SiS_Private *SiS_Pr, unsigned short ModeNo)
 {
         int i;
 
-        for(i = 0x0A; i <= 0x0E; i++) {
+        for (i = 0x0A; i <= 0x0E; i++) {
                 SiS_SetReg(SiS_Pr, SiS_Pr->SiS_P3c4, i, 0x00);
         }
 
@@ -562,15 +461,16 @@ SiS_ClearExt1Regs(struct SiS_Private *SiS_Pr, unsigned short ModeNo)
 
 static unsigned short
 SiS_GetRatePtr(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
-                                        unsigned short ModeIdIndex)
+               unsigned short ModeIdIndex)
 {
         unsigned short rrti, i, index, temp;
 
         if (ModeNo <= 0x13)
                 return 0xFFFF;
 
-        index = SiS_GetReg(SiS_Pr,SiS_Pr->SiS_P3d4, 0x33) & 0x0F;
-        if (index > 0) index--;
+        index = SiS_GetReg(SiS_Pr, SiS_Pr->SiS_P3d4, 0x33) & 0x0F;
+        if (index > 0)
+                index--;
 
         rrti = SiS_Pr->SiS_EModeIDTable[ModeIdIndex].REFindex;
         ModeNo = SiS_Pr->SiS_RefIndex[rrti].ModeID;
@@ -580,13 +480,14 @@ SiS_GetRatePtr(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
                 if (SiS_Pr->SiS_RefIndex[rrti + i].ModeID != ModeNo)
                         break;
 
-                temp = SiS_Pr->SiS_RefIndex[rrti + i].Ext_InfoFlag & ModeTypeMask;
+                temp =
+                    SiS_Pr->SiS_RefIndex[rrti + i].Ext_InfoFlag & ModeTypeMask;
                 if (temp < SiS_Pr->SiS_ModeType)
                         break;
 
                 i++;
                 index--;
-        } while(index != 0xFFFF);
+        } while (index != 0xFFFF);
 
         i--;
 
@@ -597,8 +498,7 @@ SiS_GetRatePtr(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
 /*                  SYNC                     */
 /*********************************************/
 
-static void
-SiS_SetCRT1Sync(struct SiS_Private *SiS_Pr, unsigned short rrti)
+static void SiS_SetCRT1Sync(struct SiS_Private *SiS_Pr, unsigned short rrti)
 {
         unsigned short sync = SiS_Pr->SiS_RefIndex[rrti].Ext_InfoFlag >> 8;
         sync &= 0xC0;
@@ -612,39 +512,40 @@ SiS_SetCRT1Sync(struct SiS_Private *SiS_Pr, unsigned short rrti)
 
 static void
 SiS_SetCRT1CRTC(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
-                        unsigned short ModeIdIndex, unsigned short rrti)
+                unsigned short ModeIdIndex, unsigned short rrti)
 {
-        unsigned char  index;
+        unsigned char index;
         unsigned short temp, i, j, modeflag;
 
-        SiS_SetRegAND(SiS_Pr, SiS_Pr->SiS_P3d4,0x11,0x7f);
+        SiS_SetRegAND(SiS_Pr, SiS_Pr->SiS_P3d4, 0x11, 0x7f);
 
         modeflag = SiS_Pr->SiS_EModeIDTable[ModeIdIndex].Ext_ModeFlag;
 
         index = SiS_Pr->SiS_RefIndex[rrti].Ext_CRT1CRTC;
 
-        for(i = 0,j = 0; i <= 7; i++, j++) {
+        for (i = 0, j = 0; i <= 7; i++, j++) {
                 SiS_SetReg(SiS_Pr, SiS_Pr->SiS_P3d4, j,
-                                SiS_Pr->SiS_CRT1Table[index].CR[i]);
+                           SiS_Pr->SiS_CRT1Table[index].CR[i]);
         }
-        for(j = 0x10; i <= 10; i++, j++) {
+        for (j = 0x10; i <= 10; i++, j++) {
                 SiS_SetReg(SiS_Pr, SiS_Pr->SiS_P3d4, j,
-                                SiS_Pr->SiS_CRT1Table[index].CR[i]);
+                           SiS_Pr->SiS_CRT1Table[index].CR[i]);
         }
-        for(j = 0x15; i <= 12; i++, j++) {
+        for (j = 0x15; i <= 12; i++, j++) {
                 SiS_SetReg(SiS_Pr, SiS_Pr->SiS_P3d4, j,
-                                SiS_Pr->SiS_CRT1Table[index].CR[i]);
+                           SiS_Pr->SiS_CRT1Table[index].CR[i]);
         }
-        for(j = 0x0A; i <= 15; i++, j++) {
+        for (j = 0x0A; i <= 15; i++, j++) {
                 SiS_SetReg(SiS_Pr, SiS_Pr->SiS_P3c4, j,
-                                SiS_Pr->SiS_CRT1Table[index].CR[i]);
+                           SiS_Pr->SiS_CRT1Table[index].CR[i]);
         }
 
         temp = SiS_Pr->SiS_CRT1Table[index].CR[16] & 0xE0;
-        SiS_SetReg(SiS_Pr,SiS_Pr->SiS_P3c4, 0x0E, temp);
+        SiS_SetReg(SiS_Pr, SiS_Pr->SiS_P3c4, 0x0E, temp);
 
         temp = ((SiS_Pr->SiS_CRT1Table[index].CR[16]) & 0x01) << 5;
-        if (modeflag & DoubleScanMode)  temp |= 0x80;
+        if (modeflag & DoubleScanMode)
+                temp |= 0x80;
         SiS_SetRegANDOR(SiS_Pr, SiS_Pr->SiS_P3d4, 0x09, 0x5F, temp);
 
         if (SiS_Pr->SiS_ModeType > ModeVGA)
@@ -659,10 +560,10 @@ SiS_SetCRT1CRTC(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
 
 static void
 SiS_SetCRT1Offset(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
-                        unsigned short ModeIdIndex, unsigned short rrti)
+                  unsigned short ModeIdIndex, unsigned short rrti)
 {
         unsigned short du = SiS_GetOffset(SiS_Pr, ModeNo, ModeIdIndex, rrti);
-        unsigned short infoflag =  SiS_Pr->SiS_RefIndex[rrti].Ext_InfoFlag;
+        unsigned short infoflag = SiS_Pr->SiS_RefIndex[rrti].Ext_InfoFlag;
         unsigned short temp;
 
         temp = (du >> 8) & 0x0f;
@@ -670,11 +571,13 @@ SiS_SetCRT1Offset(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
 
         SiS_SetReg(SiS_Pr, SiS_Pr->SiS_P3d4, 0x13, (du & 0xFF));
 
-        if (infoflag & InterlaceMode) du >>= 1;
+        if (infoflag & InterlaceMode)
+                du >>= 1;
 
         du <<= 5;
         temp = (du >> 8) & 0xff;
-        if (du & 0xff) temp++;
+        if (du & 0xff)
+                temp++;
         temp++;
         SiS_SetReg(SiS_Pr, SiS_Pr->SiS_P3c4, 0x10, temp);
 }
@@ -685,17 +588,17 @@ SiS_SetCRT1Offset(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
 
 static void
 SiS_SetCRT1VCLK(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
-                                                unsigned short rrti)
+                unsigned short rrti)
 {
         unsigned short index = SiS_Pr->SiS_RefIndex[rrti].Ext_CRTVCLK;
         unsigned short clka = SiS_Pr->SiS_VCLKData[index].SR2B;
         unsigned short clkb = SiS_Pr->SiS_VCLKData[index].SR2C;
 
-        SiS_SetRegAND(SiS_Pr, SiS_Pr->SiS_P3c4,0x31,0xCF);
+        SiS_SetRegAND(SiS_Pr, SiS_Pr->SiS_P3c4, 0x31, 0xCF);
 
-        SiS_SetReg(SiS_Pr,SiS_Pr->SiS_P3c4,0x2B,clka);
-        SiS_SetReg(SiS_Pr,SiS_Pr->SiS_P3c4,0x2C,clkb);
-        SiS_SetReg(SiS_Pr,SiS_Pr->SiS_P3c4,0x2D,0x01);
+        SiS_SetReg(SiS_Pr, SiS_Pr->SiS_P3c4, 0x2B, clka);
+        SiS_SetReg(SiS_Pr, SiS_Pr->SiS_P3c4, 0x2C, clkb);
+        SiS_SetReg(SiS_Pr, SiS_Pr->SiS_P3c4, 0x2D, 0x01);
 }
 
 /*********************************************/
@@ -704,7 +607,7 @@ SiS_SetCRT1VCLK(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
 
 static void
 SiS_SetCRT1FIFO_310(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
-                                                        unsigned short mi)
+                    unsigned short mi)
 {
         unsigned short modeflag = SiS_Pr->SiS_EModeIDTable[mi].Ext_ModeFlag;
 
@@ -729,7 +632,7 @@ SiS_SetCRT1FIFO_310(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
 
 static void
 SiS_SetVCLKState(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
-                                                        unsigned short rrti)
+                 unsigned short rrti)
 {
         unsigned short data = 0, VCLK = 0, index = 0;
 
@@ -738,7 +641,8 @@ SiS_SetVCLKState(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
                 VCLK = SiS_Pr->SiS_VCLKData[index].CLOCK;
         }
 
-        if (VCLK >= 166) data |= 0x0c;
+        if (VCLK >= 166)
+                data |= 0x0c;
         SiS_SetRegANDOR(SiS_Pr, SiS_Pr->SiS_P3c4, 0x32, 0xf3, data);
 
         if (VCLK >= 166)
@@ -758,7 +662,7 @@ SiS_SetVCLKState(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
 
 static void
 SiS_SetCRT1ModeRegs(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
-                        unsigned short ModeIdIndex, unsigned short rrti)
+                    unsigned short ModeIdIndex, unsigned short rrti)
 {
         unsigned short data, infoflag = 0, modeflag;
 
@@ -778,17 +682,22 @@ SiS_SetCRT1ModeRegs(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
                         data |= 0x02;
                         data |= ((SiS_Pr->SiS_ModeType - ModeVGA) << 2);
                 }
-                if (infoflag & InterlaceMode) data |= 0x20;
+                if (infoflag & InterlaceMode)
+                        data |= 0x20;
         }
         SiS_SetRegANDOR(SiS_Pr, SiS_Pr->SiS_P3c4, 0x06, 0xC0, data);
 
         data = 0;
         if (infoflag & InterlaceMode) {
                 /* data = (Hsync / 8) - ((Htotal / 8) / 2) + 3 */
-                unsigned short hrs = (SiS_GetReg(SiS_Pr, SiS_Pr->SiS_P3d4, 0x04) |
-                        ((SiS_GetReg(SiS_Pr, SiS_Pr->SiS_P3c4, 0x0b) & 0xc0) << 2)) - 3;
-                unsigned short hto = (SiS_GetReg(SiS_Pr, SiS_Pr->SiS_P3d4, 0x00) |
-                        ((SiS_GetReg(SiS_Pr, SiS_Pr->SiS_P3c4, 0x0b) & 0x03) << 8)) + 5;
+                unsigned short hrs =
+                    (SiS_GetReg(SiS_Pr, SiS_Pr->SiS_P3d4, 0x04) |
+                     ((SiS_GetReg(SiS_Pr, SiS_Pr->SiS_P3c4, 0x0b) & 0xc0) << 2))
+                    - 3;
+                unsigned short hto =
+                    (SiS_GetReg(SiS_Pr, SiS_Pr->SiS_P3d4, 0x00) |
+                     ((SiS_GetReg(SiS_Pr, SiS_Pr->SiS_P3c4, 0x0b) & 0x03) << 8))
+                    + 5;
                 data = hrs - (hto >> 1) + 3;
         }
         SiS_SetReg(SiS_Pr, SiS_Pr->SiS_P3d4, 0x19, (data & 0xFF));
@@ -829,20 +738,26 @@ SiS_SetCRT1ModeRegs(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
 
 static void
 SiS_WriteDAC(struct SiS_Private *SiS_Pr, unsigned long DACData,
-                unsigned short shiftflag, unsigned short dl, unsigned short ah,
-                unsigned short al, unsigned short dh)
+             unsigned short shiftflag, unsigned short dl, unsigned short ah,
+             unsigned short al, unsigned short dh)
 {
         unsigned short d1, d2, d3;
 
         switch (dl) {
-                case  0:
-                        d1 = dh; d2 = ah; d3 = al;
-                        break;
-                case  1:
-                        d1 = ah; d2 = al; d3 = dh;
-                        break;
-                default:
-                        d1 = al; d2 = dh; d3 = ah;
+        case 0:
+                d1 = dh;
+                d2 = ah;
+                d3 = al;
+                break;
+        case 1:
+                d1 = ah;
+                d2 = al;
+                d3 = dh;
+                break;
+        default:
+                d1 = al;
+                d2 = dh;
+                d3 = ah;
         }
         SiS_SetRegByte(SiS_Pr, DACData, (d1 << shiftflag));
         SiS_SetRegByte(SiS_Pr, DACData, (d2 << shiftflag));
@@ -850,7 +765,8 @@ SiS_WriteDAC(struct SiS_Private *SiS_Pr, unsigned long DACData,
 }
 
 static void
-SiS_LoadDAC(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short mi)
+SiS_LoadDAC(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
+            unsigned short mi)
 {
         unsigned short data, data2, time, i, j, k, m, n, o;
         unsigned short si, di, bx, sf;
@@ -884,41 +800,45 @@ SiS_LoadDAC(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short mi
 
         SiS_SetRegByte(SiS_Pr, DACAddr, 0x00);
 
-        for(i = 0; i < j; i++) {
+        for (i = 0; i < j; i++) {
                 data = table[i];
-                for(k = 0; k < 3; k++) {
+                for (k = 0; k < 3; k++) {
                         data2 = 0;
-                        if (data & 0x01) data2 += 0x2A;
-                        if (data & 0x02) data2 += 0x15;
+                        if (data & 0x01)
+                                data2 += 0x2A;
+                        if (data & 0x02)
+                                data2 += 0x15;
                         SiS_SetRegByte(SiS_Pr, DACData, (data2 << sf));
                         data >>= 2;
                 }
         }
 
         if (time == 256) {
-                for(i = 16; i < 32; i++) {
+                for (i = 16; i < 32; i++) {
                         data = table[i] << sf;
-                        for(k = 0; k < 3; k++)
+                        for (k = 0; k < 3; k++)
                                 SiS_SetRegByte(SiS_Pr, DACData, data);
                 }
                 si = 32;
-                for(m = 0; m < 9; m++) {
+                for (m = 0; m < 9; m++) {
                         di = si;
                         bx = si + 4;
-                        for(n = 0; n < 3; n++) {
-                                for(o = 0; o < 5; o++) {
+                        for (n = 0; n < 3; n++) {
+                                for (o = 0; o < 5; o++) {
                                         SiS_WriteDAC(SiS_Pr, DACData, sf, n,
-                                                table[di], table[bx], table[si]);
+                                                     table[di], table[bx],
+                                                     table[si]);
                                         si++;
                                 }
                                 si -= 2;
-                                for(o = 0; o < 3; o++) {
+                                for (o = 0; o < 3; o++) {
                                         SiS_WriteDAC(SiS_Pr, DACData, sf, n,
-                                                table[di], table[si], table[bx]);
+                                                     table[di], table[si],
+                                                     table[bx]);
                                         si--;
                                 }
                         }
-                si += 5;
+                        si += 5;
                 }
         }
 }
@@ -929,7 +849,7 @@ SiS_LoadDAC(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short mi
 
 static void
 SiS_SetCRT1Group(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
-                                        unsigned short ModeIdIndex)
+                 unsigned short ModeIdIndex)
 {
         unsigned short StandTableIndex, rrti;
 
@@ -970,11 +890,10 @@ SiS_SetCRT1Group(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
 /*                 SiSSetMode()              */
 /*********************************************/
 
-int
-SiSUSBSetMode(struct SiS_Private *SiS_Pr, unsigned short ModeNo)
+int SiSUSBSetMode(struct SiS_Private *SiS_Pr, unsigned short ModeNo)
 {
         unsigned short ModeIdIndex;
-        unsigned long  BaseAddr = SiS_Pr->IOAddress;
+        unsigned long BaseAddr = SiS_Pr->IOAddress;
 
         SiSUSB_InitPtr(SiS_Pr);
         SiSUSBRegInit(SiS_Pr, BaseAddr);
@@ -990,7 +909,7 @@ SiSUSBSetMode(struct SiS_Private *SiS_Pr, unsigned short ModeNo)
         ModeNo &= 0x7f;
 
         SiS_Pr->SiS_ModeType =
-                SiS_Pr->SiS_EModeIDTable[ModeIdIndex].Ext_ModeFlag & ModeTypeMask;
+            SiS_Pr->SiS_EModeIDTable[ModeIdIndex].Ext_ModeFlag & ModeTypeMask;
 
         SiS_Pr->SiS_SetFlag = LowModeTests;
 
@@ -1008,8 +927,7 @@ SiSUSBSetMode(struct SiS_Private *SiS_Pr, unsigned short ModeNo)
         return 1;
 }
 
-int
-SiSUSBSetVESAMode(struct SiS_Private *SiS_Pr, unsigned short VModeNo)
+int SiSUSBSetVESAMode(struct SiS_Private *SiS_Pr, unsigned short VModeNo)
 {
         unsigned short ModeNo = 0;
         int i;
@@ -1041,7 +959,3 @@ SiSUSBSetVESAMode(struct SiS_Private *SiS_Pr, unsigned short VModeNo)
 }
 
 #endif /* INCL_SISUSB_CON */
-
-
-
-
diff --git a/drivers/usb/misc/sisusbvga/sisusb_init.h b/drivers/usb/misc/sisusbvga/sisusb_init.h
index 864bc0e96591..c46ce42d4489 100644
--- a/drivers/usb/misc/sisusbvga/sisusb_init.h
+++ b/drivers/usb/misc/sisusbvga/sisusb_init.h
@@ -46,7 +46,7 @@
  * * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
  * * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  *
- * Author:      Thomas Winischhofer <thomas@winischhofer.net>
+ * Author:      Thomas Winischhofer <thomas@winischhofer.net>
  *
  */
 
@@ -76,21 +76,21 @@
 #define CRT2Mode                0x0800
 #define HalfDCLK                0x1000
 #define NoSupportSimuTV         0x2000
-#define NoSupportLCDScale       0x4000 /* SiS bridge: No scaling possible (no matter what panel) */
+#define NoSupportLCDScale       0x4000  /* SiS bridge: No scaling possible (no matter what panel) */
 #define DoubleScanMode          0x8000
 
 /* Infoflag */
 #define SupportTV               0x0008
 #define SupportTV1024           0x0800
-#define SupportCHTV             0x0800
-#define Support64048060Hz       0x0800  /* Special for 640x480 LCD */
+#define SupportCHTV             0x0800
+#define Support64048060Hz       0x0800  /* Special for 640x480 LCD */
 #define SupportHiVision         0x0010
 #define SupportYPbPr750p        0x1000
 #define SupportLCD              0x0020
 #define SupportRAMDAC2          0x0040  /* All           (<= 100Mhz) */
-#define SupportRAMDAC2_135      0x0100  /* All except DH (<= 135Mhz) */
-#define SupportRAMDAC2_162      0x0200  /* B, C          (<= 162Mhz) */
-#define SupportRAMDAC2_202      0x0400  /* C             (<= 202Mhz) */
+#define SupportRAMDAC2_135      0x0100  /* All except DH (<= 135Mhz) */
+#define SupportRAMDAC2_162      0x0200  /* B, C          (<= 162Mhz) */
+#define SupportRAMDAC2_202      0x0400  /* C             (<= 202Mhz) */
 #define InterlaceMode           0x0080
 #define SyncPP                  0x0000
 #define SyncPN                  0x4000
@@ -129,7 +129,7 @@
 #define SIS_RI_856x480          19
 #define SIS_RI_1280x768         20
 #define SIS_RI_1400x1050        21
-#define SIS_RI_1152x864         22  /* Up to here SiS conforming */
+#define SIS_RI_1152x864         22      /* Up to here SiS conforming */
 #define SIS_RI_848x480          23
 #define SIS_RI_1360x768         24
 #define SIS_RI_1024x600         25
@@ -147,691 +147,691 @@
 #define SIS_CRT2_PORT_04        0x04 - 0x30
 
 /* Mode numbers */
-static const unsigned short ModeIndex_320x200[]   = {0x59, 0x41, 0x00, 0x4f};
-static const unsigned short ModeIndex_320x240[]   = {0x50, 0x56, 0x00, 0x53};
-static const unsigned short ModeIndex_400x300[]   = {0x51, 0x57, 0x00, 0x54};
-static const unsigned short ModeIndex_512x384[]   = {0x52, 0x58, 0x00, 0x5c};
-static const unsigned short ModeIndex_640x400[]   = {0x2f, 0x5d, 0x00, 0x5e};
-static const unsigned short ModeIndex_640x480[]   = {0x2e, 0x44, 0x00, 0x62};
-static const unsigned short ModeIndex_720x480[]   = {0x31, 0x33, 0x00, 0x35};
-static const unsigned short ModeIndex_720x576[]   = {0x32, 0x34, 0x00, 0x36};
-static const unsigned short ModeIndex_768x576[]   = {0x5f, 0x60, 0x00, 0x61};
-static const unsigned short ModeIndex_800x480[]   = {0x70, 0x7a, 0x00, 0x76};
-static const unsigned short ModeIndex_800x600[]   = {0x30, 0x47, 0x00, 0x63};
-static const unsigned short ModeIndex_848x480[]   = {0x39, 0x3b, 0x00, 0x3e};
-static const unsigned short ModeIndex_856x480[]   = {0x3f, 0x42, 0x00, 0x45};
-static const unsigned short ModeIndex_960x540[]   = {0x1d, 0x1e, 0x00, 0x1f};
-static const unsigned short ModeIndex_960x600[]   = {0x20, 0x21, 0x00, 0x22};
-static const unsigned short ModeIndex_1024x768[]  = {0x38, 0x4a, 0x00, 0x64};
-static const unsigned short ModeIndex_1024x576[]  = {0x71, 0x74, 0x00, 0x77};
-static const unsigned short ModeIndex_1152x864[]  = {0x29, 0x2a, 0x00, 0x2b};
-static const unsigned short ModeIndex_1280x720[]  = {0x79, 0x75, 0x00, 0x78};
-static const unsigned short ModeIndex_1280x768[]  = {0x23, 0x24, 0x00, 0x25};
-static const unsigned short ModeIndex_1280x1024[] = {0x3a, 0x4d, 0x00, 0x65};
+static const unsigned short ModeIndex_320x200[] = { 0x59, 0x41, 0x00, 0x4f };
+static const unsigned short ModeIndex_320x240[] = { 0x50, 0x56, 0x00, 0x53 };
+static const unsigned short ModeIndex_400x300[] = { 0x51, 0x57, 0x00, 0x54 };
+static const unsigned short ModeIndex_512x384[] = { 0x52, 0x58, 0x00, 0x5c };
+static const unsigned short ModeIndex_640x400[] = { 0x2f, 0x5d, 0x00, 0x5e };
+static const unsigned short ModeIndex_640x480[] = { 0x2e, 0x44, 0x00, 0x62 };
+static const unsigned short ModeIndex_720x480[] = { 0x31, 0x33, 0x00, 0x35 };
+static const unsigned short ModeIndex_720x576[] = { 0x32, 0x34, 0x00, 0x36 };
+static const unsigned short ModeIndex_768x576[] = { 0x5f, 0x60, 0x00, 0x61 };
+static const unsigned short ModeIndex_800x480[] = { 0x70, 0x7a, 0x00, 0x76 };
+static const unsigned short ModeIndex_800x600[] = { 0x30, 0x47, 0x00, 0x63 };
+static const unsigned short ModeIndex_848x480[] = { 0x39, 0x3b, 0x00, 0x3e };
+static const unsigned short ModeIndex_856x480[] = { 0x3f, 0x42, 0x00, 0x45 };
+static const unsigned short ModeIndex_960x540[] = { 0x1d, 0x1e, 0x00, 0x1f };
+static const unsigned short ModeIndex_960x600[] = { 0x20, 0x21, 0x00, 0x22 };
+static const unsigned short ModeIndex_1024x768[] = { 0x38, 0x4a, 0x00, 0x64 };
+static const unsigned short ModeIndex_1024x576[] = { 0x71, 0x74, 0x00, 0x77 };
+static const unsigned short ModeIndex_1152x864[] = { 0x29, 0x2a, 0x00, 0x2b };
+static const unsigned short ModeIndex_1280x720[] = { 0x79, 0x75, 0x00, 0x78 };
+static const unsigned short ModeIndex_1280x768[] = { 0x23, 0x24, 0x00, 0x25 };
+static const unsigned short ModeIndex_1280x1024[] = { 0x3a, 0x4d, 0x00, 0x65 };
 
-static const unsigned char SiS_MDA_DAC[] =
-{
-        0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-        0x15,0x15,0x15,0x15,0x15,0x15,0x15,0x15,
-        0x15,0x15,0x15,0x15,0x15,0x15,0x15,0x15,
-        0x3F,0x3F,0x3F,0x3F,0x3F,0x3F,0x3F,0x3F,
-        0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-        0x15,0x15,0x15,0x15,0x15,0x15,0x15,0x15,
-        0x15,0x15,0x15,0x15,0x15,0x15,0x15,0x15,
-        0x3F,0x3F,0x3F,0x3F,0x3F,0x3F,0x3F,0x3F
+static const unsigned char SiS_MDA_DAC[] = {
+        0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+        0x15, 0x15, 0x15, 0x15, 0x15, 0x15, 0x15, 0x15,
+        0x15, 0x15, 0x15, 0x15, 0x15, 0x15, 0x15, 0x15,
+        0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F,
+        0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+        0x15, 0x15, 0x15, 0x15, 0x15, 0x15, 0x15, 0x15,
+        0x15, 0x15, 0x15, 0x15, 0x15, 0x15, 0x15, 0x15,
+        0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F
 };
 
-static const unsigned char SiS_CGA_DAC[] =
-{
-        0x00,0x10,0x04,0x14,0x01,0x11,0x09,0x15,
-        0x00,0x10,0x04,0x14,0x01,0x11,0x09,0x15,
-        0x2A,0x3A,0x2E,0x3E,0x2B,0x3B,0x2F,0x3F,
-        0x2A,0x3A,0x2E,0x3E,0x2B,0x3B,0x2F,0x3F,
-        0x00,0x10,0x04,0x14,0x01,0x11,0x09,0x15,
-        0x00,0x10,0x04,0x14,0x01,0x11,0x09,0x15,
-        0x2A,0x3A,0x2E,0x3E,0x2B,0x3B,0x2F,0x3F,
-        0x2A,0x3A,0x2E,0x3E,0x2B,0x3B,0x2F,0x3F
+static const unsigned char SiS_CGA_DAC[] = {
+        0x00, 0x10, 0x04, 0x14, 0x01, 0x11, 0x09, 0x15,
+        0x00, 0x10, 0x04, 0x14, 0x01, 0x11, 0x09, 0x15,
+        0x2A, 0x3A, 0x2E, 0x3E, 0x2B, 0x3B, 0x2F, 0x3F,
+        0x2A, 0x3A, 0x2E, 0x3E, 0x2B, 0x3B, 0x2F, 0x3F,
+        0x00, 0x10, 0x04, 0x14, 0x01, 0x11, 0x09, 0x15,
+        0x00, 0x10, 0x04, 0x14, 0x01, 0x11, 0x09, 0x15,
+        0x2A, 0x3A, 0x2E, 0x3E, 0x2B, 0x3B, 0x2F, 0x3F,
+        0x2A, 0x3A, 0x2E, 0x3E, 0x2B, 0x3B, 0x2F, 0x3F
 };
 
-static const unsigned char SiS_EGA_DAC[] =
-{
-        0x00,0x10,0x04,0x14,0x01,0x11,0x05,0x15,
-        0x20,0x30,0x24,0x34,0x21,0x31,0x25,0x35,
-        0x08,0x18,0x0C,0x1C,0x09,0x19,0x0D,0x1D,
-        0x28,0x38,0x2C,0x3C,0x29,0x39,0x2D,0x3D,
-        0x02,0x12,0x06,0x16,0x03,0x13,0x07,0x17,
-        0x22,0x32,0x26,0x36,0x23,0x33,0x27,0x37,
-        0x0A,0x1A,0x0E,0x1E,0x0B,0x1B,0x0F,0x1F,
-        0x2A,0x3A,0x2E,0x3E,0x2B,0x3B,0x2F,0x3F
+static const unsigned char SiS_EGA_DAC[] = {
+        0x00, 0x10, 0x04, 0x14, 0x01, 0x11, 0x05, 0x15,
+        0x20, 0x30, 0x24, 0x34, 0x21, 0x31, 0x25, 0x35,
+        0x08, 0x18, 0x0C, 0x1C, 0x09, 0x19, 0x0D, 0x1D,
+        0x28, 0x38, 0x2C, 0x3C, 0x29, 0x39, 0x2D, 0x3D,
+        0x02, 0x12, 0x06, 0x16, 0x03, 0x13, 0x07, 0x17,
+        0x22, 0x32, 0x26, 0x36, 0x23, 0x33, 0x27, 0x37,
+        0x0A, 0x1A, 0x0E, 0x1E, 0x0B, 0x1B, 0x0F, 0x1F,
+        0x2A, 0x3A, 0x2E, 0x3E, 0x2B, 0x3B, 0x2F, 0x3F
 };
 
-static const unsigned char SiS_VGA_DAC[] =
-{
-        0x00,0x10,0x04,0x14,0x01,0x11,0x09,0x15,
-        0x2A,0x3A,0x2E,0x3E,0x2B,0x3B,0x2F,0x3F,
-        0x00,0x05,0x08,0x0B,0x0E,0x11,0x14,0x18,
-        0x1C,0x20,0x24,0x28,0x2D,0x32,0x38,0x3F,
-        0x00,0x10,0x1F,0x2F,0x3F,0x1F,0x27,0x2F,
-        0x37,0x3F,0x2D,0x31,0x36,0x3A,0x3F,0x00,
-        0x07,0x0E,0x15,0x1C,0x0E,0x11,0x15,0x18,
-        0x1C,0x14,0x16,0x18,0x1A,0x1C,0x00,0x04,
-        0x08,0x0C,0x10,0x08,0x0A,0x0C,0x0E,0x10,
-        0x0B,0x0C,0x0D,0x0F,0x10
+static const unsigned char SiS_VGA_DAC[] = {
+        0x00, 0x10, 0x04, 0x14, 0x01, 0x11, 0x09, 0x15,
+        0x2A, 0x3A, 0x2E, 0x3E, 0x2B, 0x3B, 0x2F, 0x3F,
+        0x00, 0x05, 0x08, 0x0B, 0x0E, 0x11, 0x14, 0x18,
+        0x1C, 0x20, 0x24, 0x28, 0x2D, 0x32, 0x38, 0x3F,
+        0x00, 0x10, 0x1F, 0x2F, 0x3F, 0x1F, 0x27, 0x2F,
+        0x37, 0x3F, 0x2D, 0x31, 0x36, 0x3A, 0x3F, 0x00,
+        0x07, 0x0E, 0x15, 0x1C, 0x0E, 0x11, 0x15, 0x18,
+        0x1C, 0x14, 0x16, 0x18, 0x1A, 0x1C, 0x00, 0x04,
+        0x08, 0x0C, 0x10, 0x08, 0x0A, 0x0C, 0x0E, 0x10,
+        0x0B, 0x0C, 0x0D, 0x0F, 0x10
 };
 
-static const struct SiS_St SiSUSB_SModeIDTable[] =
-{
-        {0x03,0x0010,0x18,0x02,0x02,0x00,0x01,0x03,0x40},
-        {0xff,0x0000,0x00,0x00,0x00,0x00,0x00,0x00,0x00}
+static const struct SiS_St SiSUSB_SModeIDTable[] = {
+        {0x03, 0x0010, 0x18, 0x02, 0x02, 0x00, 0x01, 0x03, 0x40},
+        {0xff, 0x0000, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}
 };
 
-static const struct SiS_StResInfo_S SiSUSB_StResInfo[] =
-{
-        { 640,400},
-        { 640,350},
-        { 720,400},
-        { 720,350},
-        { 640,480}
+static const struct SiS_StResInfo_S SiSUSB_StResInfo[] = {
+        {640, 400},
+        {640, 350},
+        {720, 400},
+        {720, 350},
+        {640, 480}
 };
 
-static const struct SiS_ModeResInfo SiSUSB_ModeResInfo[] =
-{
-        {  320, 200, 8, 8},   /* 0x00 */
-        {  320, 240, 8, 8},   /* 0x01 */
-        {  320, 400, 8, 8},   /* 0x02 */
-        {  400, 300, 8, 8},   /* 0x03 */
-        {  512, 384, 8, 8},   /* 0x04 */
-        {  640, 400, 8,16},   /* 0x05 */
-        {  640, 480, 8,16},   /* 0x06 */
-        {  800, 600, 8,16},   /* 0x07 */
-        { 1024, 768, 8,16},   /* 0x08 */
-        { 1280,1024, 8,16},   /* 0x09 */
-        { 1600,1200, 8,16},   /* 0x0a */
-        { 1920,1440, 8,16},   /* 0x0b */
-        { 2048,1536, 8,16},   /* 0x0c */
-        {  720, 480, 8,16},   /* 0x0d */
-        {  720, 576, 8,16},   /* 0x0e */
-        { 1280, 960, 8,16},   /* 0x0f */
-        {  800, 480, 8,16},   /* 0x10 */
-        { 1024, 576, 8,16},   /* 0x11 */
-        { 1280, 720, 8,16},   /* 0x12 */
-        {  856, 480, 8,16},   /* 0x13 */
-        { 1280, 768, 8,16},   /* 0x14 */
-        { 1400,1050, 8,16},   /* 0x15 */
-        { 1152, 864, 8,16},   /* 0x16 */
-        {  848, 480, 8,16},   /* 0x17 */
-        { 1360, 768, 8,16},   /* 0x18 */
-        { 1024, 600, 8,16},   /* 0x19 */
-        { 1152, 768, 8,16},   /* 0x1a */
-        {  768, 576, 8,16},   /* 0x1b */
-        { 1360,1024, 8,16},   /* 0x1c */
-        { 1680,1050, 8,16},   /* 0x1d */
-        { 1280, 800, 8,16},   /* 0x1e */
-        { 1920,1080, 8,16},   /* 0x1f */
-        {  960, 540, 8,16},   /* 0x20 */
-        {  960, 600, 8,16}    /* 0x21 */
+static const struct SiS_ModeResInfo SiSUSB_ModeResInfo[] = {
+        {320, 200, 8, 8},       /* 0x00 */
+        {320, 240, 8, 8},       /* 0x01 */
+        {320, 400, 8, 8},       /* 0x02 */
+        {400, 300, 8, 8},       /* 0x03 */
+        {512, 384, 8, 8},       /* 0x04 */
+        {640, 400, 8, 16},      /* 0x05 */
+        {640, 480, 8, 16},      /* 0x06 */
+        {800, 600, 8, 16},      /* 0x07 */
+        {1024, 768, 8, 16},     /* 0x08 */
+        {1280, 1024, 8, 16},    /* 0x09 */
+        {1600, 1200, 8, 16},    /* 0x0a */
+        {1920, 1440, 8, 16},    /* 0x0b */
+        {2048, 1536, 8, 16},    /* 0x0c */
+        {720, 480, 8, 16},      /* 0x0d */
+        {720, 576, 8, 16},      /* 0x0e */
+        {1280, 960, 8, 16},     /* 0x0f */
+        {800, 480, 8, 16},      /* 0x10 */
+        {1024, 576, 8, 16},     /* 0x11 */
+        {1280, 720, 8, 16},     /* 0x12 */
+        {856, 480, 8, 16},      /* 0x13 */
+        {1280, 768, 8, 16},     /* 0x14 */
+        {1400, 1050, 8, 16},    /* 0x15 */
+        {1152, 864, 8, 16},     /* 0x16 */
+        {848, 480, 8, 16},      /* 0x17 */
+        {1360, 768, 8, 16},     /* 0x18 */
+        {1024, 600, 8, 16},     /* 0x19 */
+        {1152, 768, 8, 16},     /* 0x1a */
+        {768, 576, 8, 16},      /* 0x1b */
+        {1360, 1024, 8, 16},    /* 0x1c */
+        {1680, 1050, 8, 16},    /* 0x1d */
+        {1280, 800, 8, 16},     /* 0x1e */
+        {1920, 1080, 8, 16},    /* 0x1f */
+        {960, 540, 8, 16},      /* 0x20 */
+        {960, 600, 8, 16}       /* 0x21 */
 };
 
-static const struct SiS_StandTable SiSUSB_StandTable[] =
-{
+static const struct SiS_StandTable SiSUSB_StandTable[] = {
         /* MD_3_400 - mode 0x03 - 400 */
         {
-                0x50,0x18,0x10,0x1000,
-                { 0x00,0x03,0x00,0x02 },
-                0x67,
-                { 0x5f,0x4f,0x50,0x82,0x55,0x81,0xbf,0x1f,
-                  0x00,0x4f,0x0d,0x0e,0x00,0x00,0x00,0x00,
-                  0x9c,0x8e,0x8f,0x28,0x1f,0x96,0xb9,0xa3,
-                  0xff },
-                { 0x00,0x01,0x02,0x03,0x04,0x05,0x14,0x07,
-                  0x38,0x39,0x3a,0x3b,0x3c,0x3d,0x3e,0x3f,
-                  0x0c,0x00,0x0f,0x08 },
-                { 0x00,0x00,0x00,0x00,0x00,0x10,0x0e,0x00, 0xff }
-        },
+         0x50, 0x18, 0x10, 0x1000,
+         {0x00, 0x03, 0x00, 0x02},
+         0x67,
+         {0x5f, 0x4f, 0x50, 0x82, 0x55, 0x81, 0xbf, 0x1f,
+          0x00, 0x4f, 0x0d, 0x0e, 0x00, 0x00, 0x00, 0x00,
+          0x9c, 0x8e, 0x8f, 0x28, 0x1f, 0x96, 0xb9, 0xa3,
+          0xff},
+         {0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x14, 0x07,
+          0x38, 0x39, 0x3a, 0x3b, 0x3c, 0x3d, 0x3e, 0x3f,
+          0x0c, 0x00, 0x0f, 0x08},
+         {0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x0e, 0x00, 0xff}
+         },
         /* Generic for VGA and higher */
         {
-                0x00,0x00,0x00,0x0000,
-                { 0x01,0x0f,0x00,0x0e },
-                0x23,
-                { 0x5f,0x4f,0x50,0x82,0x54,0x80,0x0b,0x3e,
-                  0x00,0x40,0x00,0x00,0x00,0x00,0x00,0x00,
-                  0xea,0x8c,0xdf,0x28,0x40,0xe7,0x04,0xa3,
-                  0xff },
-                { 0x00,0x01,0x02,0x03,0x04,0x05,0x06,0x07,
-                  0x08,0x09,0x0a,0x0b,0x0c,0x0d,0x0e,0x0f,
-                  0x01,0x00,0x00,0x00 },
-                { 0x00,0x00,0x00,0x00,0x00,0x40,0x05,0x0f, 0xff }
-        }
+         0x00, 0x00, 0x00, 0x0000,
+         {0x01, 0x0f, 0x00, 0x0e},
+         0x23,
+         {0x5f, 0x4f, 0x50, 0x82, 0x54, 0x80, 0x0b, 0x3e,
+          0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+          0xea, 0x8c, 0xdf, 0x28, 0x40, 0xe7, 0x04, 0xa3,
+          0xff},
+         {0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
+          0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f,
+          0x01, 0x00, 0x00, 0x00},
+         {0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x05, 0x0f, 0xff}
+         }
 };
 
-static const struct SiS_Ext SiSUSB_EModeIDTable[] =
-{
-        {0x2e,0x0a1b,0x0101,SIS_RI_640x480,  0x00,0x00,0x05,0x05,0x08, 2}, /* 640x480x8 */
-        {0x2f,0x0a1b,0x0100,SIS_RI_640x400,  0x00,0x00,0x05,0x05,0x10, 0}, /* 640x400x8 */
-        {0x30,0x2a1b,0x0103,SIS_RI_800x600,  0x00,0x00,0x07,0x06,0x00, 3}, /* 800x600x8 */
-        {0x31,0x4a1b,0x0000,SIS_RI_720x480,  0x00,0x00,0x06,0x06,0x11,-1}, /* 720x480x8 */
-        {0x32,0x4a1b,0x0000,SIS_RI_720x576,  0x00,0x00,0x06,0x06,0x12,-1}, /* 720x576x8 */
-        {0x33,0x4a1d,0x0000,SIS_RI_720x480,  0x00,0x00,0x06,0x06,0x11,-1}, /* 720x480x16 */
-        {0x34,0x6a1d,0x0000,SIS_RI_720x576,  0x00,0x00,0x06,0x06,0x12,-1}, /* 720x576x16 */
-        {0x35,0x4a1f,0x0000,SIS_RI_720x480,  0x00,0x00,0x06,0x06,0x11,-1}, /* 720x480x32 */
-        {0x36,0x6a1f,0x0000,SIS_RI_720x576,  0x00,0x00,0x06,0x06,0x12,-1}, /* 720x576x32 */
-        {0x38,0x0a1b,0x0105,SIS_RI_1024x768, 0x00,0x00,0x08,0x07,0x13, 4}, /* 1024x768x8 */
-        {0x3a,0x0e3b,0x0107,SIS_RI_1280x1024,0x00,0x00,0x00,0x00,0x2f, 8}, /* 1280x1024x8 */
-        {0x41,0x9a1d,0x010e,SIS_RI_320x200,  0x00,0x00,0x04,0x04,0x1a, 0}, /* 320x200x16 */
-        {0x44,0x0a1d,0x0111,SIS_RI_640x480,  0x00,0x00,0x05,0x05,0x08, 2}, /* 640x480x16 */
-        {0x47,0x2a1d,0x0114,SIS_RI_800x600,  0x00,0x00,0x07,0x06,0x00, 3}, /* 800x600x16 */
-        {0x4a,0x0a3d,0x0117,SIS_RI_1024x768, 0x00,0x00,0x08,0x07,0x13, 4}, /* 1024x768x16 */
-        {0x4d,0x0e7d,0x011a,SIS_RI_1280x1024,0x00,0x00,0x00,0x00,0x2f, 8}, /* 1280x1024x16 */
-        {0x50,0x9a1b,0x0132,SIS_RI_320x240,  0x00,0x00,0x04,0x04,0x1b, 2}, /* 320x240x8  */
-        {0x51,0xba1b,0x0133,SIS_RI_400x300,  0x00,0x00,0x07,0x07,0x1c, 3}, /* 400x300x8  */
-        {0x52,0xba1b,0x0134,SIS_RI_512x384,  0x00,0x00,0x00,0x00,0x1d, 4}, /* 512x384x8  */
-        {0x56,0x9a1d,0x0135,SIS_RI_320x240,  0x00,0x00,0x04,0x04,0x1b, 2}, /* 320x240x16 */
-        {0x57,0xba1d,0x0136,SIS_RI_400x300,  0x00,0x00,0x07,0x07,0x1c, 3}, /* 400x300x16 */
-        {0x58,0xba1d,0x0137,SIS_RI_512x384,  0x00,0x00,0x00,0x00,0x1d, 4}, /* 512x384x16 */
-        {0x59,0x9a1b,0x0138,SIS_RI_320x200,  0x00,0x00,0x04,0x04,0x1a, 0}, /* 320x200x8  */
-        {0x5c,0xba1f,0x0000,SIS_RI_512x384,  0x00,0x00,0x00,0x00,0x1d, 4}, /* 512x384x32 */
-        {0x5d,0x0a1d,0x0139,SIS_RI_640x400,  0x00,0x00,0x05,0x07,0x10, 0}, /* 640x400x16 */
-        {0x5e,0x0a1f,0x0000,SIS_RI_640x400,  0x00,0x00,0x05,0x07,0x10, 0}, /* 640x400x32 */
-        {0x62,0x0a3f,0x013a,SIS_RI_640x480,  0x00,0x00,0x05,0x05,0x08, 2}, /* 640x480x32 */
-        {0x63,0x2a3f,0x013b,SIS_RI_800x600,  0x00,0x00,0x07,0x06,0x00, 3}, /* 800x600x32 */
-        {0x64,0x0a7f,0x013c,SIS_RI_1024x768, 0x00,0x00,0x08,0x07,0x13, 4}, /* 1024x768x32 */
-        {0x65,0x0eff,0x013d,SIS_RI_1280x1024,0x00,0x00,0x00,0x00,0x2f, 8}, /* 1280x1024x32 */
-        {0x70,0x6a1b,0x0000,SIS_RI_800x480,  0x00,0x00,0x07,0x07,0x1e,-1}, /* 800x480x8 */
-        {0x71,0x4a1b,0x0000,SIS_RI_1024x576, 0x00,0x00,0x00,0x00,0x21,-1}, /* 1024x576x8 */
-        {0x74,0x4a1d,0x0000,SIS_RI_1024x576, 0x00,0x00,0x00,0x00,0x21,-1}, /* 1024x576x16 */
-        {0x75,0x0a3d,0x0000,SIS_RI_1280x720, 0x00,0x00,0x00,0x00,0x24, 5}, /* 1280x720x16 */
-        {0x76,0x6a1f,0x0000,SIS_RI_800x480,  0x00,0x00,0x07,0x07,0x1e,-1}, /* 800x480x32 */
-        {0x77,0x4a1f,0x0000,SIS_RI_1024x576, 0x00,0x00,0x00,0x00,0x21,-1}, /* 1024x576x32 */
-        {0x78,0x0a3f,0x0000,SIS_RI_1280x720, 0x00,0x00,0x00,0x00,0x24, 5}, /* 1280x720x32 */
-        {0x79,0x0a3b,0x0000,SIS_RI_1280x720, 0x00,0x00,0x00,0x00,0x24, 5}, /* 1280x720x8 */
-        {0x7a,0x6a1d,0x0000,SIS_RI_800x480,  0x00,0x00,0x07,0x07,0x1e,-1}, /* 800x480x16 */
-        {0x23,0x0e3b,0x0000,SIS_RI_1280x768, 0x00,0x00,0x00,0x00,0x27, 6}, /* 1280x768x8 */
-        {0x24,0x0e7d,0x0000,SIS_RI_1280x768, 0x00,0x00,0x00,0x00,0x27, 6}, /* 1280x768x16 */
-        {0x25,0x0eff,0x0000,SIS_RI_1280x768, 0x00,0x00,0x00,0x00,0x27, 6}, /* 1280x768x32 */
-        {0x39,0x6a1b,0x0000,SIS_RI_848x480,  0x00,0x00,0x00,0x00,0x28,-1}, /* 848x480 */
-        {0x3b,0x6a3d,0x0000,SIS_RI_848x480,  0x00,0x00,0x00,0x00,0x28,-1},
-        {0x3e,0x6a7f,0x0000,SIS_RI_848x480,  0x00,0x00,0x00,0x00,0x28,-1},
-        {0x3f,0x6a1b,0x0000,SIS_RI_856x480,  0x00,0x00,0x00,0x00,0x2a,-1}, /* 856x480 */
-        {0x42,0x6a3d,0x0000,SIS_RI_856x480,  0x00,0x00,0x00,0x00,0x2a,-1},
-        {0x45,0x6a7f,0x0000,SIS_RI_856x480,  0x00,0x00,0x00,0x00,0x2a,-1},
-        {0x4f,0x9a1f,0x0000,SIS_RI_320x200,  0x00,0x00,0x04,0x04,0x1a, 0}, /* 320x200x32 */
-        {0x53,0x9a1f,0x0000,SIS_RI_320x240,  0x00,0x00,0x04,0x04,0x1b, 2}, /* 320x240x32 */
-        {0x54,0xba1f,0x0000,SIS_RI_400x300,  0x00,0x00,0x07,0x07,0x1c, 3}, /* 400x300x32 */
-        {0x5f,0x6a1b,0x0000,SIS_RI_768x576,  0x00,0x00,0x06,0x06,0x2c,-1}, /* 768x576 */
-        {0x60,0x6a1d,0x0000,SIS_RI_768x576,  0x00,0x00,0x06,0x06,0x2c,-1},
-        {0x61,0x6a3f,0x0000,SIS_RI_768x576,  0x00,0x00,0x06,0x06,0x2c,-1},
-        {0x1d,0x6a1b,0x0000,SIS_RI_960x540,  0x00,0x00,0x00,0x00,0x2d,-1}, /* 960x540 */
-        {0x1e,0x6a3d,0x0000,SIS_RI_960x540,  0x00,0x00,0x00,0x00,0x2d,-1},
-        {0x1f,0x6a7f,0x0000,SIS_RI_960x540,  0x00,0x00,0x00,0x00,0x2d,-1},
-        {0x20,0x6a1b,0x0000,SIS_RI_960x600,  0x00,0x00,0x00,0x00,0x2e,-1}, /* 960x600 */
-        {0x21,0x6a3d,0x0000,SIS_RI_960x600,  0x00,0x00,0x00,0x00,0x2e,-1},
-        {0x22,0x6a7f,0x0000,SIS_RI_960x600,  0x00,0x00,0x00,0x00,0x2e,-1},
-        {0x29,0x4e1b,0x0000,SIS_RI_1152x864, 0x00,0x00,0x00,0x00,0x33,-1}, /* 1152x864 */
-        {0x2a,0x4e3d,0x0000,SIS_RI_1152x864, 0x00,0x00,0x00,0x00,0x33,-1},
-        {0x2b,0x4e7f,0x0000,SIS_RI_1152x864, 0x00,0x00,0x00,0x00,0x33,-1},
-        {0xff,0x0000,0x0000,0,               0x00,0x00,0x00,0x00,0x00,-1}
+static const struct SiS_Ext SiSUSB_EModeIDTable[] = {
+        {0x2e, 0x0a1b, 0x0101, SIS_RI_640x480, 0x00, 0x00, 0x05, 0x05, 0x08, 2},        /* 640x480x8 */
+        {0x2f, 0x0a1b, 0x0100, SIS_RI_640x400, 0x00, 0x00, 0x05, 0x05, 0x10, 0},        /* 640x400x8 */
+        {0x30, 0x2a1b, 0x0103, SIS_RI_800x600, 0x00, 0x00, 0x07, 0x06, 0x00, 3},        /* 800x600x8 */
+        {0x31, 0x4a1b, 0x0000, SIS_RI_720x480, 0x00, 0x00, 0x06, 0x06, 0x11, -1},       /* 720x480x8 */
+        {0x32, 0x4a1b, 0x0000, SIS_RI_720x576, 0x00, 0x00, 0x06, 0x06, 0x12, -1},       /* 720x576x8 */
+        {0x33, 0x4a1d, 0x0000, SIS_RI_720x480, 0x00, 0x00, 0x06, 0x06, 0x11, -1},       /* 720x480x16 */
+        {0x34, 0x6a1d, 0x0000, SIS_RI_720x576, 0x00, 0x00, 0x06, 0x06, 0x12, -1},       /* 720x576x16 */
+        {0x35, 0x4a1f, 0x0000, SIS_RI_720x480, 0x00, 0x00, 0x06, 0x06, 0x11, -1},       /* 720x480x32 */
+        {0x36, 0x6a1f, 0x0000, SIS_RI_720x576, 0x00, 0x00, 0x06, 0x06, 0x12, -1},       /* 720x576x32 */
+        {0x38, 0x0a1b, 0x0105, SIS_RI_1024x768, 0x00, 0x00, 0x08, 0x07, 0x13, 4},       /* 1024x768x8 */
+        {0x3a, 0x0e3b, 0x0107, SIS_RI_1280x1024, 0x00, 0x00, 0x00, 0x00, 0x2f, 8},      /* 1280x1024x8 */
+        {0x41, 0x9a1d, 0x010e, SIS_RI_320x200, 0x00, 0x00, 0x04, 0x04, 0x1a, 0},        /* 320x200x16 */
+        {0x44, 0x0a1d, 0x0111, SIS_RI_640x480, 0x00, 0x00, 0x05, 0x05, 0x08, 2},        /* 640x480x16 */
+        {0x47, 0x2a1d, 0x0114, SIS_RI_800x600, 0x00, 0x00, 0x07, 0x06, 0x00, 3},        /* 800x600x16 */
+        {0x4a, 0x0a3d, 0x0117, SIS_RI_1024x768, 0x00, 0x00, 0x08, 0x07, 0x13, 4},       /* 1024x768x16 */
+        {0x4d, 0x0e7d, 0x011a, SIS_RI_1280x1024, 0x00, 0x00, 0x00, 0x00, 0x2f, 8},      /* 1280x1024x16 */
+        {0x50, 0x9a1b, 0x0132, SIS_RI_320x240, 0x00, 0x00, 0x04, 0x04, 0x1b, 2},        /* 320x240x8  */
+        {0x51, 0xba1b, 0x0133, SIS_RI_400x300, 0x00, 0x00, 0x07, 0x07, 0x1c, 3},        /* 400x300x8  */
+        {0x52, 0xba1b, 0x0134, SIS_RI_512x384, 0x00, 0x00, 0x00, 0x00, 0x1d, 4},        /* 512x384x8  */
+        {0x56, 0x9a1d, 0x0135, SIS_RI_320x240, 0x00, 0x00, 0x04, 0x04, 0x1b, 2},        /* 320x240x16 */
+        {0x57, 0xba1d, 0x0136, SIS_RI_400x300, 0x00, 0x00, 0x07, 0x07, 0x1c, 3},        /* 400x300x16 */
+        {0x58, 0xba1d, 0x0137, SIS_RI_512x384, 0x00, 0x00, 0x00, 0x00, 0x1d, 4},        /* 512x384x16 */
+        {0x59, 0x9a1b, 0x0138, SIS_RI_320x200, 0x00, 0x00, 0x04, 0x04, 0x1a, 0},        /* 320x200x8  */
+        {0x5c, 0xba1f, 0x0000, SIS_RI_512x384, 0x00, 0x00, 0x00, 0x00, 0x1d, 4},        /* 512x384x32 */
+        {0x5d, 0x0a1d, 0x0139, SIS_RI_640x400, 0x00, 0x00, 0x05, 0x07, 0x10, 0},        /* 640x400x16 */
+        {0x5e, 0x0a1f, 0x0000, SIS_RI_640x400, 0x00, 0x00, 0x05, 0x07, 0x10, 0},        /* 640x400x32 */
+        {0x62, 0x0a3f, 0x013a, SIS_RI_640x480, 0x00, 0x00, 0x05, 0x05, 0x08, 2},        /* 640x480x32 */
+        {0x63, 0x2a3f, 0x013b, SIS_RI_800x600, 0x00, 0x00, 0x07, 0x06, 0x00, 3},        /* 800x600x32 */
+        {0x64, 0x0a7f, 0x013c, SIS_RI_1024x768, 0x00, 0x00, 0x08, 0x07, 0x13, 4},       /* 1024x768x32 */
+        {0x65, 0x0eff, 0x013d, SIS_RI_1280x1024, 0x00, 0x00, 0x00, 0x00, 0x2f, 8},      /* 1280x1024x32 */
+        {0x70, 0x6a1b, 0x0000, SIS_RI_800x480, 0x00, 0x00, 0x07, 0x07, 0x1e, -1},       /* 800x480x8 */
+        {0x71, 0x4a1b, 0x0000, SIS_RI_1024x576, 0x00, 0x00, 0x00, 0x00, 0x21, -1},      /* 1024x576x8 */
+        {0x74, 0x4a1d, 0x0000, SIS_RI_1024x576, 0x00, 0x00, 0x00, 0x00, 0x21, -1},      /* 1024x576x16 */
+        {0x75, 0x0a3d, 0x0000, SIS_RI_1280x720, 0x00, 0x00, 0x00, 0x00, 0x24, 5},       /* 1280x720x16 */
+        {0x76, 0x6a1f, 0x0000, SIS_RI_800x480, 0x00, 0x00, 0x07, 0x07, 0x1e, -1},       /* 800x480x32 */
+        {0x77, 0x4a1f, 0x0000, SIS_RI_1024x576, 0x00, 0x00, 0x00, 0x00, 0x21, -1},      /* 1024x576x32 */
+        {0x78, 0x0a3f, 0x0000, SIS_RI_1280x720, 0x00, 0x00, 0x00, 0x00, 0x24, 5},       /* 1280x720x32 */
+        {0x79, 0x0a3b, 0x0000, SIS_RI_1280x720, 0x00, 0x00, 0x00, 0x00, 0x24, 5},       /* 1280x720x8 */
+        {0x7a, 0x6a1d, 0x0000, SIS_RI_800x480, 0x00, 0x00, 0x07, 0x07, 0x1e, -1},       /* 800x480x16 */
+        {0x23, 0x0e3b, 0x0000, SIS_RI_1280x768, 0x00, 0x00, 0x00, 0x00, 0x27, 6},       /* 1280x768x8 */
+        {0x24, 0x0e7d, 0x0000, SIS_RI_1280x768, 0x00, 0x00, 0x00, 0x00, 0x27, 6},       /* 1280x768x16 */
+        {0x25, 0x0eff, 0x0000, SIS_RI_1280x768, 0x00, 0x00, 0x00, 0x00, 0x27, 6},       /* 1280x768x32 */
+        {0x39, 0x6a1b, 0x0000, SIS_RI_848x480, 0x00, 0x00, 0x00, 0x00, 0x28, -1},       /* 848x480 */
+        {0x3b, 0x6a3d, 0x0000, SIS_RI_848x480, 0x00, 0x00, 0x00, 0x00, 0x28,
+         -1},
+        {0x3e, 0x6a7f, 0x0000, SIS_RI_848x480, 0x00, 0x00, 0x00, 0x00, 0x28,
+         -1},
+        {0x3f, 0x6a1b, 0x0000, SIS_RI_856x480, 0x00, 0x00, 0x00, 0x00, 0x2a, -1},       /* 856x480 */
+        {0x42, 0x6a3d, 0x0000, SIS_RI_856x480, 0x00, 0x00, 0x00, 0x00, 0x2a,
+         -1},
+        {0x45, 0x6a7f, 0x0000, SIS_RI_856x480, 0x00, 0x00, 0x00, 0x00, 0x2a,
+         -1},
+        {0x4f, 0x9a1f, 0x0000, SIS_RI_320x200, 0x00, 0x00, 0x04, 0x04, 0x1a, 0},        /* 320x200x32 */
+        {0x53, 0x9a1f, 0x0000, SIS_RI_320x240, 0x00, 0x00, 0x04, 0x04, 0x1b, 2},        /* 320x240x32 */
+        {0x54, 0xba1f, 0x0000, SIS_RI_400x300, 0x00, 0x00, 0x07, 0x07, 0x1c, 3},        /* 400x300x32 */
+        {0x5f, 0x6a1b, 0x0000, SIS_RI_768x576, 0x00, 0x00, 0x06, 0x06, 0x2c, -1},       /* 768x576 */
+        {0x60, 0x6a1d, 0x0000, SIS_RI_768x576, 0x00, 0x00, 0x06, 0x06, 0x2c,
+         -1},
+        {0x61, 0x6a3f, 0x0000, SIS_RI_768x576, 0x00, 0x00, 0x06, 0x06, 0x2c,
+         -1},
+        {0x1d, 0x6a1b, 0x0000, SIS_RI_960x540, 0x00, 0x00, 0x00, 0x00, 0x2d, -1},       /* 960x540 */
+        {0x1e, 0x6a3d, 0x0000, SIS_RI_960x540, 0x00, 0x00, 0x00, 0x00, 0x2d,
+         -1},
+        {0x1f, 0x6a7f, 0x0000, SIS_RI_960x540, 0x00, 0x00, 0x00, 0x00, 0x2d,
+         -1},
+        {0x20, 0x6a1b, 0x0000, SIS_RI_960x600, 0x00, 0x00, 0x00, 0x00, 0x2e, -1},       /* 960x600 */
+        {0x21, 0x6a3d, 0x0000, SIS_RI_960x600, 0x00, 0x00, 0x00, 0x00, 0x2e,
+         -1},
+        {0x22, 0x6a7f, 0x0000, SIS_RI_960x600, 0x00, 0x00, 0x00, 0x00, 0x2e,
+         -1},
+        {0x29, 0x4e1b, 0x0000, SIS_RI_1152x864, 0x00, 0x00, 0x00, 0x00, 0x33, -1},      /* 1152x864 */
+        {0x2a, 0x4e3d, 0x0000, SIS_RI_1152x864, 0x00, 0x00, 0x00, 0x00, 0x33,
+         -1},
+        {0x2b, 0x4e7f, 0x0000, SIS_RI_1152x864, 0x00, 0x00, 0x00, 0x00, 0x33,
+         -1},
+        {0xff, 0x0000, 0x0000, 0, 0x00, 0x00, 0x00, 0x00, 0x00, -1}
 };
 
-static const struct SiS_Ext2 SiSUSB_RefIndex[] =
-{
-        {0x085f,0x0d,0x03,0x05,0x05,0x30, 800, 600, 0x40, 0x00, 0x00}, /* 0x0 */
-        {0x0067,0x0e,0x04,0x05,0x05,0x30, 800, 600, 0x40, 0x00, 0x00}, /* 0x1 */
-        {0x0067,0x0f,0x08,0x48,0x05,0x30, 800, 600, 0x40, 0x00, 0x00}, /* 0x2 */
-        {0x0067,0x10,0x07,0x8b,0x05,0x30, 800, 600, 0x40, 0x00, 0x00}, /* 0x3 */
-        {0x0047,0x11,0x0a,0x00,0x05,0x30, 800, 600, 0x40, 0x00, 0x00}, /* 0x4 */
-        {0x0047,0x12,0x0d,0x00,0x05,0x30, 800, 600, 0x40, 0x00, 0x00}, /* 0x5 */
-        {0x0047,0x13,0x13,0x00,0x05,0x30, 800, 600, 0x20, 0x00, 0x00}, /* 0x6 */
-        {0x0107,0x14,0x1c,0x00,0x05,0x30, 800, 600, 0x20, 0x00, 0x00}, /* 0x7 */
-        {0xc85f,0x05,0x00,0x04,0x04,0x2e, 640, 480, 0x40, 0x00, 0x00}, /* 0x8 */
-        {0xc067,0x06,0x02,0x04,0x04,0x2e, 640, 480, 0x40, 0x00, 0x00}, /* 0x9 */
-        {0xc067,0x07,0x02,0x47,0x04,0x2e, 640, 480, 0x40, 0x00, 0x00}, /* 0xa */
-        {0xc067,0x08,0x03,0x8a,0x04,0x2e, 640, 480, 0x40, 0x00, 0x00}, /* 0xb */
-        {0xc047,0x09,0x05,0x00,0x04,0x2e, 640, 480, 0x40, 0x00, 0x00}, /* 0xc */
-        {0xc047,0x0a,0x09,0x00,0x04,0x2e, 640, 480, 0x40, 0x00, 0x00}, /* 0xd */
-        {0xc047,0x0b,0x0e,0x00,0x04,0x2e, 640, 480, 0x40, 0x00, 0x00}, /* 0xe */
-        {0xc047,0x0c,0x15,0x00,0x04,0x2e, 640, 480, 0x40, 0x00, 0x00}, /* 0xf */
-        {0x487f,0x04,0x00,0x00,0x00,0x2f, 640, 400, 0x30, 0x55, 0x6e}, /* 0x10 */
-        {0xc06f,0x3c,0x01,0x06,0x13,0x31, 720, 480, 0x30, 0x00, 0x00}, /* 0x11 */
-        {0x006f,0x3d,0x6f,0x06,0x14,0x32, 720, 576, 0x30, 0x00, 0x00}, /* 0x12 (6f was 03) */
-        {0x0087,0x15,0x06,0x00,0x06,0x38,1024, 768, 0x30, 0x00, 0x00}, /* 0x13 */
-        {0xc877,0x16,0x0b,0x06,0x06,0x38,1024, 768, 0x20, 0x00, 0x00}, /* 0x14 */
-        {0xc067,0x17,0x0f,0x49,0x06,0x38,1024, 768, 0x20, 0x00, 0x00}, /* 0x15 */
-        {0x0067,0x18,0x11,0x00,0x06,0x38,1024, 768, 0x20, 0x00, 0x00}, /* 0x16 */
-        {0x0047,0x19,0x16,0x8c,0x06,0x38,1024, 768, 0x20, 0x00, 0x00}, /* 0x17 */
-        {0x0107,0x1a,0x1b,0x00,0x06,0x38,1024, 768, 0x10, 0x00, 0x00}, /* 0x18 */
-        {0x0107,0x1b,0x1f,0x00,0x06,0x38,1024, 768, 0x10, 0x00, 0x00}, /* 0x19 */
-        {0x407f,0x00,0x00,0x00,0x00,0x41, 320, 200, 0x30, 0x56, 0x4e}, /* 0x1a */
-        {0xc07f,0x01,0x00,0x04,0x04,0x50, 320, 240, 0x30, 0x00, 0x00}, /* 0x1b */
-        {0x007f,0x02,0x04,0x05,0x05,0x51, 400, 300, 0x30, 0x00, 0x00}, /* 0x1c */
-        {0xc077,0x03,0x0b,0x06,0x06,0x52, 512, 384, 0x30, 0x00, 0x00}, /* 0x1d */
-        {0x0077,0x32,0x40,0x08,0x18,0x70, 800, 480, 0x30, 0x00, 0x00}, /* 0x1e */
-        {0x0047,0x33,0x07,0x08,0x18,0x70, 800, 480, 0x30, 0x00, 0x00}, /* 0x1f */
-        {0x0047,0x34,0x0a,0x08,0x18,0x70, 800, 480, 0x30, 0x00, 0x00}, /* 0x20 */
-        {0x0077,0x35,0x0b,0x09,0x19,0x71,1024, 576, 0x30, 0x00, 0x00}, /* 0x21 */
-        {0x0047,0x36,0x11,0x09,0x19,0x71,1024, 576, 0x30, 0x00, 0x00}, /* 0x22 */
-        {0x0047,0x37,0x16,0x09,0x19,0x71,1024, 576, 0x30, 0x00, 0x00}, /* 0x23 */
-        {0x1137,0x38,0x19,0x0a,0x0c,0x75,1280, 720, 0x30, 0x00, 0x00}, /* 0x24 */
-        {0x1107,0x39,0x1e,0x0a,0x0c,0x75,1280, 720, 0x30, 0x00, 0x00}, /* 0x25 */
-        {0x1307,0x3a,0x20,0x0a,0x0c,0x75,1280, 720, 0x30, 0x00, 0x00}, /* 0x26 */
-        {0x0077,0x42,0x5b,0x08,0x11,0x23,1280, 768, 0x30, 0x00, 0x00}, /* 0x27 */
-        {0x0087,0x45,0x57,0x00,0x16,0x39, 848, 480, 0x30, 0x00, 0x00}, /* 0x28 38Hzi  */
-        {0xc067,0x46,0x55,0x0b,0x16,0x39, 848, 480, 0x30, 0x00, 0x00}, /* 0x29 848x480-60Hz   */
-        {0x0087,0x47,0x57,0x00,0x17,0x3f, 856, 480, 0x30, 0x00, 0x00}, /* 0x2a 856x480-38Hzi  */
-        {0xc067,0x48,0x57,0x00,0x17,0x3f, 856, 480, 0x30, 0x00, 0x00}, /* 0x2b 856x480-60Hz   */
-        {0x006f,0x4d,0x71,0x06,0x15,0x5f, 768, 576, 0x30, 0x00, 0x00}, /* 0x2c 768x576-56Hz   */
-        {0x0067,0x52,0x6a,0x00,0x1c,0x1d, 960, 540, 0x30, 0x00, 0x00}, /* 0x2d 960x540 60Hz */
-        {0x0077,0x53,0x6b,0x0b,0x1d,0x20, 960, 600, 0x30, 0x00, 0x00}, /* 0x2e 960x600 60Hz */
-        {0x0087,0x1c,0x11,0x00,0x07,0x3a,1280,1024, 0x30, 0x00, 0x00}, /* 0x2f */
-        {0x0137,0x1d,0x19,0x07,0x07,0x3a,1280,1024, 0x00, 0x00, 0x00}, /* 0x30 */
-        {0x0107,0x1e,0x1e,0x00,0x07,0x3a,1280,1024, 0x00, 0x00, 0x00}, /* 0x31 */
-        {0x0207,0x1f,0x20,0x00,0x07,0x3a,1280,1024, 0x00, 0x00, 0x00}, /* 0x32 */
-        {0x0127,0x54,0x6d,0x00,0x1a,0x29,1152, 864, 0x30, 0x00, 0x00}, /* 0x33 1152x864-60Hz  */
-        {0x0127,0x44,0x19,0x00,0x1a,0x29,1152, 864, 0x30, 0x00, 0x00}, /* 0x34 1152x864-75Hz  */
-        {0x0127,0x4a,0x1e,0x00,0x1a,0x29,1152, 864, 0x30, 0x00, 0x00}, /* 0x35 1152x864-85Hz  */
-        {0xffff,0x00,0x00,0x00,0x00,0x00,   0,   0,    0, 0x00, 0x00}
+static const struct SiS_Ext2 SiSUSB_RefIndex[] = {
+        {0x085f, 0x0d, 0x03, 0x05, 0x05, 0x30, 800, 600, 0x40, 0x00, 0x00},     /* 0x0 */
+        {0x0067, 0x0e, 0x04, 0x05, 0x05, 0x30, 800, 600, 0x40, 0x00, 0x00},     /* 0x1 */
+        {0x0067, 0x0f, 0x08, 0x48, 0x05, 0x30, 800, 600, 0x40, 0x00, 0x00},     /* 0x2 */
+        {0x0067, 0x10, 0x07, 0x8b, 0x05, 0x30, 800, 600, 0x40, 0x00, 0x00},     /* 0x3 */
+        {0x0047, 0x11, 0x0a, 0x00, 0x05, 0x30, 800, 600, 0x40, 0x00, 0x00},     /* 0x4 */
+        {0x0047, 0x12, 0x0d, 0x00, 0x05, 0x30, 800, 600, 0x40, 0x00, 0x00},     /* 0x5 */
+        {0x0047, 0x13, 0x13, 0x00, 0x05, 0x30, 800, 600, 0x20, 0x00, 0x00},     /* 0x6 */
+        {0x0107, 0x14, 0x1c, 0x00, 0x05, 0x30, 800, 600, 0x20, 0x00, 0x00},     /* 0x7 */
+        {0xc85f, 0x05, 0x00, 0x04, 0x04, 0x2e, 640, 480, 0x40, 0x00, 0x00},     /* 0x8 */
+        {0xc067, 0x06, 0x02, 0x04, 0x04, 0x2e, 640, 480, 0x40, 0x00, 0x00},     /* 0x9 */
+        {0xc067, 0x07, 0x02, 0x47, 0x04, 0x2e, 640, 480, 0x40, 0x00, 0x00},     /* 0xa */
+        {0xc067, 0x08, 0x03, 0x8a, 0x04, 0x2e, 640, 480, 0x40, 0x00, 0x00},     /* 0xb */
+        {0xc047, 0x09, 0x05, 0x00, 0x04, 0x2e, 640, 480, 0x40, 0x00, 0x00},     /* 0xc */
+        {0xc047, 0x0a, 0x09, 0x00, 0x04, 0x2e, 640, 480, 0x40, 0x00, 0x00},     /* 0xd */
+        {0xc047, 0x0b, 0x0e, 0x00, 0x04, 0x2e, 640, 480, 0x40, 0x00, 0x00},     /* 0xe */
+        {0xc047, 0x0c, 0x15, 0x00, 0x04, 0x2e, 640, 480, 0x40, 0x00, 0x00},     /* 0xf */
+        {0x487f, 0x04, 0x00, 0x00, 0x00, 0x2f, 640, 400, 0x30, 0x55, 0x6e},     /* 0x10 */
+        {0xc06f, 0x3c, 0x01, 0x06, 0x13, 0x31, 720, 480, 0x30, 0x00, 0x00},     /* 0x11 */
+        {0x006f, 0x3d, 0x6f, 0x06, 0x14, 0x32, 720, 576, 0x30, 0x00, 0x00},     /* 0x12 (6f was 03) */
+        {0x0087, 0x15, 0x06, 0x00, 0x06, 0x38, 1024, 768, 0x30, 0x00, 0x00},    /* 0x13 */
+        {0xc877, 0x16, 0x0b, 0x06, 0x06, 0x38, 1024, 768, 0x20, 0x00, 0x00},    /* 0x14 */
+        {0xc067, 0x17, 0x0f, 0x49, 0x06, 0x38, 1024, 768, 0x20, 0x00, 0x00},    /* 0x15 */
+        {0x0067, 0x18, 0x11, 0x00, 0x06, 0x38, 1024, 768, 0x20, 0x00, 0x00},    /* 0x16 */
+        {0x0047, 0x19, 0x16, 0x8c, 0x06, 0x38, 1024, 768, 0x20, 0x00, 0x00},    /* 0x17 */
+        {0x0107, 0x1a, 0x1b, 0x00, 0x06, 0x38, 1024, 768, 0x10, 0x00, 0x00},    /* 0x18 */
+        {0x0107, 0x1b, 0x1f, 0x00, 0x06, 0x38, 1024, 768, 0x10, 0x00, 0x00},    /* 0x19 */
+        {0x407f, 0x00, 0x00, 0x00, 0x00, 0x41, 320, 200, 0x30, 0x56, 0x4e},     /* 0x1a */
+        {0xc07f, 0x01, 0x00, 0x04, 0x04, 0x50, 320, 240, 0x30, 0x00, 0x00},     /* 0x1b */
+        {0x007f, 0x02, 0x04, 0x05, 0x05, 0x51, 400, 300, 0x30, 0x00, 0x00},     /* 0x1c */
+        {0xc077, 0x03, 0x0b, 0x06, 0x06, 0x52, 512, 384, 0x30, 0x00, 0x00},     /* 0x1d */
+        {0x0077, 0x32, 0x40, 0x08, 0x18, 0x70, 800, 480, 0x30, 0x00, 0x00},     /* 0x1e */
+        {0x0047, 0x33, 0x07, 0x08, 0x18, 0x70, 800, 480, 0x30, 0x00, 0x00},     /* 0x1f */
+        {0x0047, 0x34, 0x0a, 0x08, 0x18, 0x70, 800, 480, 0x30, 0x00, 0x00},     /* 0x20 */
+        {0x0077, 0x35, 0x0b, 0x09, 0x19, 0x71, 1024, 576, 0x30, 0x00, 0x00},    /* 0x21 */
+        {0x0047, 0x36, 0x11, 0x09, 0x19, 0x71, 1024, 576, 0x30, 0x00, 0x00},    /* 0x22 */
+        {0x0047, 0x37, 0x16, 0x09, 0x19, 0x71, 1024, 576, 0x30, 0x00, 0x00},    /* 0x23 */
+        {0x1137, 0x38, 0x19, 0x0a, 0x0c, 0x75, 1280, 720, 0x30, 0x00, 0x00},    /* 0x24 */
+        {0x1107, 0x39, 0x1e, 0x0a, 0x0c, 0x75, 1280, 720, 0x30, 0x00, 0x00},    /* 0x25 */
+        {0x1307, 0x3a, 0x20, 0x0a, 0x0c, 0x75, 1280, 720, 0x30, 0x00, 0x00},    /* 0x26 */
+        {0x0077, 0x42, 0x5b, 0x08, 0x11, 0x23, 1280, 768, 0x30, 0x00, 0x00},    /* 0x27 */
+        {0x0087, 0x45, 0x57, 0x00, 0x16, 0x39, 848, 480, 0x30, 0x00, 0x00},     /* 0x28 38Hzi  */
+        {0xc067, 0x46, 0x55, 0x0b, 0x16, 0x39, 848, 480, 0x30, 0x00, 0x00},     /* 0x29 848x480-60Hz   */
+        {0x0087, 0x47, 0x57, 0x00, 0x17, 0x3f, 856, 480, 0x30, 0x00, 0x00},     /* 0x2a 856x480-38Hzi  */
+        {0xc067, 0x48, 0x57, 0x00, 0x17, 0x3f, 856, 480, 0x30, 0x00, 0x00},     /* 0x2b 856x480-60Hz   */
+        {0x006f, 0x4d, 0x71, 0x06, 0x15, 0x5f, 768, 576, 0x30, 0x00, 0x00},     /* 0x2c 768x576-56Hz   */
+        {0x0067, 0x52, 0x6a, 0x00, 0x1c, 0x1d, 960, 540, 0x30, 0x00, 0x00},     /* 0x2d 960x540 60Hz */
+        {0x0077, 0x53, 0x6b, 0x0b, 0x1d, 0x20, 960, 600, 0x30, 0x00, 0x00},     /* 0x2e 960x600 60Hz */
+        {0x0087, 0x1c, 0x11, 0x00, 0x07, 0x3a, 1280, 1024, 0x30, 0x00, 0x00},   /* 0x2f */
+        {0x0137, 0x1d, 0x19, 0x07, 0x07, 0x3a, 1280, 1024, 0x00, 0x00, 0x00},   /* 0x30 */
+        {0x0107, 0x1e, 0x1e, 0x00, 0x07, 0x3a, 1280, 1024, 0x00, 0x00, 0x00},   /* 0x31 */
+        {0x0207, 0x1f, 0x20, 0x00, 0x07, 0x3a, 1280, 1024, 0x00, 0x00, 0x00},   /* 0x32 */
+        {0x0127, 0x54, 0x6d, 0x00, 0x1a, 0x29, 1152, 864, 0x30, 0x00, 0x00},    /* 0x33 1152x864-60Hz  */
+        {0x0127, 0x44, 0x19, 0x00, 0x1a, 0x29, 1152, 864, 0x30, 0x00, 0x00},    /* 0x34 1152x864-75Hz  */
+        {0x0127, 0x4a, 0x1e, 0x00, 0x1a, 0x29, 1152, 864, 0x30, 0x00, 0x00},    /* 0x35 1152x864-85Hz  */
+        {0xffff, 0x00, 0x00, 0x00, 0x00, 0x00, 0, 0, 0, 0x00, 0x00}
 };
 
-static const struct SiS_CRT1Table SiSUSB_CRT1Table[] =
-{
- {{0x2d,0x27,0x28,0x90,0x2c,0x80,0xbf,0x1f,
-   0x9c,0x8e,0x8f,0x96,0xb9,0x30,0x00,0x00,
-   0x00}}, /* 0x0 */
- {{0x2d,0x27,0x28,0x90,0x2c,0x80,0x0b,0x3e,
-   0xe9,0x8b,0xdf,0xe7,0x04,0x00,0x00,0x00,
-   0x00}}, /* 0x1 */
- {{0x3d,0x31,0x31,0x81,0x37,0x1f,0x72,0xf0,
-   0x58,0x8c,0x57,0x57,0x73,0x20,0x00,0x05,
-   0x01}}, /* 0x2 */
- {{0x4f,0x3f,0x3f,0x93,0x45,0x0d,0x24,0xf5,
-   0x02,0x88,0xff,0xff,0x25,0x10,0x00,0x01,
-   0x01}}, /* 0x3 */
- {{0x5f,0x4f,0x50,0x82,0x55,0x81,0xbf,0x1f,
-   0x9c,0x8e,0x8f,0x96,0xb9,0x30,0x00,0x05,
-   0x00}}, /* 0x4 */
- {{0x5f,0x4f,0x4f,0x83,0x55,0x81,0x0b,0x3e,
-   0xe9,0x8b,0xdf,0xe8,0x0c,0x00,0x00,0x05,
-   0x00}}, /* 0x5 */
- {{0x63,0x4f,0x4f,0x87,0x56,0x9b,0x06,0x3e,
-   0xe8,0x8a,0xdf,0xe7,0x07,0x00,0x00,0x01,
-   0x00}}, /* 0x6 */
- {{0x64,0x4f,0x4f,0x88,0x55,0x9d,0xf2,0x1f,
-   0xe0,0x83,0xdf,0xdf,0xf3,0x10,0x00,0x01,
-   0x00}}, /* 0x7 */
- {{0x63,0x4f,0x4f,0x87,0x5a,0x81,0xfb,0x1f,
-   0xe0,0x83,0xdf,0xdf,0xfc,0x10,0x00,0x05,
-   0x00}}, /* 0x8 */
- {{0x65,0x4f,0x4f,0x89,0x58,0x80,0xfb,0x1f,
-   0xe0,0x83,0xdf,0xdf,0xfc,0x10,0x00,0x05,
-   0x61}}, /* 0x9 */
- {{0x65,0x4f,0x4f,0x89,0x58,0x80,0x01,0x3e,
-   0xe0,0x83,0xdf,0xdf,0x02,0x00,0x00,0x05,
-   0x61}}, /* 0xa */
- {{0x67,0x4f,0x4f,0x8b,0x58,0x81,0x0d,0x3e,
-   0xe0,0x83,0xdf,0xdf,0x0e,0x00,0x00,0x05,
-   0x61}}, /* 0xb */
- {{0x65,0x4f,0x4f,0x89,0x57,0x9f,0xfb,0x1f,
-   0xe6,0x8a,0xdf,0xdf,0xfc,0x10,0x00,0x01,
-   0x00}}, /* 0xc */
- {{0x7b,0x63,0x63,0x9f,0x6a,0x93,0x6f,0xf0,
-   0x58,0x8a,0x57,0x57,0x70,0x20,0x00,0x05,
-   0x01}}, /* 0xd */
- {{0x7f,0x63,0x63,0x83,0x6c,0x1c,0x72,0xf0,
-   0x58,0x8c,0x57,0x57,0x73,0x20,0x00,0x06,
-   0x01}}, /* 0xe */
- {{0x7d,0x63,0x63,0x81,0x6e,0x1d,0x98,0xf0,
-   0x7c,0x82,0x57,0x57,0x99,0x00,0x00,0x06,
-   0x01}}, /* 0xf */
- {{0x7f,0x63,0x63,0x83,0x69,0x13,0x6f,0xf0,
-   0x58,0x8b,0x57,0x57,0x70,0x20,0x00,0x06,
-   0x01}}, /* 0x10 */
- {{0x7e,0x63,0x63,0x82,0x6b,0x13,0x75,0xf0,
-   0x58,0x8b,0x57,0x57,0x76,0x20,0x00,0x06,
-   0x01}}, /* 0x11 */
- {{0x81,0x63,0x63,0x85,0x6d,0x18,0x7a,0xf0,
-   0x58,0x8b,0x57,0x57,0x7b,0x20,0x00,0x06,
-   0x61}}, /* 0x12 */
- {{0x83,0x63,0x63,0x87,0x6e,0x19,0x81,0xf0,
-   0x58,0x8b,0x57,0x57,0x82,0x20,0x00,0x06,
-   0x61}}, /* 0x13 */
- {{0x85,0x63,0x63,0x89,0x6f,0x1a,0x91,0xf0,
-   0x58,0x8b,0x57,0x57,0x92,0x20,0x00,0x06,
-   0x61}}, /* 0x14 */
- {{0x99,0x7f,0x7f,0x9d,0x84,0x1a,0x96,0x1f,
-   0x7f,0x83,0x7f,0x7f,0x97,0x10,0x00,0x02,
-   0x00}}, /* 0x15 */
- {{0xa3,0x7f,0x7f,0x87,0x86,0x97,0x24,0xf5,
-   0x02,0x88,0xff,0xff,0x25,0x10,0x00,0x02,
-   0x01}}, /* 0x16 */
- {{0xa1,0x7f,0x7f,0x85,0x86,0x97,0x24,0xf5,
-   0x02,0x88,0xff,0xff,0x25,0x10,0x00,0x02,
-   0x01}}, /* 0x17 */
- {{0x9f,0x7f,0x7f,0x83,0x85,0x91,0x1e,0xf5,
-   0x00,0x83,0xff,0xff,0x1f,0x10,0x00,0x02,
-   0x01}}, /* 0x18 */
- {{0xa7,0x7f,0x7f,0x8b,0x89,0x95,0x26,0xf5,
-   0x00,0x83,0xff,0xff,0x27,0x10,0x00,0x02,
-   0x01}}, /* 0x19 */
- {{0xa9,0x7f,0x7f,0x8d,0x8c,0x9a,0x2c,0xf5,
-   0x00,0x83,0xff,0xff,0x2d,0x14,0x00,0x02,
-   0x62}}, /* 0x1a */
- {{0xab,0x7f,0x7f,0x8f,0x8d,0x9b,0x35,0xf5,
-   0x00,0x83,0xff,0xff,0x36,0x14,0x00,0x02,
-   0x62}}, /* 0x1b */
- {{0xcf,0x9f,0x9f,0x93,0xb2,0x01,0x14,0xba,
-   0x00,0x83,0xff,0xff,0x15,0x00,0x00,0x03,
-   0x00}}, /* 0x1c */
- {{0xce,0x9f,0x9f,0x92,0xa9,0x17,0x28,0x5a,
-   0x00,0x83,0xff,0xff,0x29,0x09,0x00,0x07,
-   0x01}}, /* 0x1d */
- {{0xce,0x9f,0x9f,0x92,0xa5,0x17,0x28,0x5a,
-   0x00,0x83,0xff,0xff,0x29,0x09,0x00,0x07,
-   0x01}}, /* 0x1e */
- {{0xd3,0x9f,0x9f,0x97,0xab,0x1f,0x2e,0x5a,
-   0x00,0x83,0xff,0xff,0x2f,0x09,0x00,0x07,
-   0x01}}, /* 0x1f */
- {{0x09,0xc7,0xc7,0x8d,0xd3,0x0b,0xe0,0x10,
-   0xb0,0x83,0xaf,0xaf,0xe1,0x2f,0x01,0x04,
-   0x00}}, /* 0x20 */
- {{0x09,0xc7,0xc7,0x8d,0xd3,0x0b,0xe0,0x10,
-   0xb0,0x83,0xaf,0xaf,0xe1,0x2f,0x01,0x04,
-   0x00}}, /* 0x21 */
- {{0x09,0xc7,0xc7,0x8d,0xd3,0x0b,0xe0,0x10,
-   0xb0,0x83,0xaf,0xaf,0xe1,0x2f,0x01,0x04,
-   0x00}}, /* 0x22 */
- {{0x09,0xc7,0xc7,0x8d,0xd3,0x0b,0xe0,0x10,
-   0xb0,0x83,0xaf,0xaf,0xe1,0x2f,0x01,0x04,
-   0x00}}, /* 0x23 */
- {{0x09,0xc7,0xc7,0x8d,0xd3,0x0b,0xe0,0x10,
-   0xb0,0x83,0xaf,0xaf,0xe1,0x2f,0x01,0x04,
-   0x00}}, /* 0x24 */
- {{0x09,0xc7,0xc7,0x8d,0xd3,0x0b,0xe0,0x10,
-   0xb0,0x83,0xaf,0xaf,0xe1,0x2f,0x01,0x04,
-   0x00}}, /* 0x25 */
- {{0x09,0xc7,0xc7,0x8d,0xd3,0x0b,0xe0,0x10,
-   0xb0,0x83,0xaf,0xaf,0xe1,0x2f,0x01,0x04,
-   0x00}}, /* 0x26 */
- {{0x40,0xef,0xef,0x84,0x03,0x1d,0xda,0x1f,
-   0xa0,0x83,0x9f,0x9f,0xdb,0x1f,0x41,0x01,
-   0x00}}, /* 0x27 */
- {{0x43,0xef,0xef,0x87,0x06,0x00,0xd4,0x1f,
-   0xa0,0x83,0x9f,0x9f,0xd5,0x1f,0x41,0x05,
-   0x63}}, /* 0x28 */
- {{0x45,0xef,0xef,0x89,0x07,0x01,0xd9,0x1f,
-   0xa0,0x83,0x9f,0x9f,0xda,0x1f,0x41,0x05,
-   0x63}}, /* 0x29 */
- {{0x40,0xef,0xef,0x84,0x03,0x1d,0xda,0x1f,
-   0xa0,0x83,0x9f,0x9f,0xdb,0x1f,0x41,0x01,
-   0x00}}, /* 0x2a */
- {{0x40,0xef,0xef,0x84,0x03,0x1d,0xda,0x1f,
-   0xa0,0x83,0x9f,0x9f,0xdb,0x1f,0x41,0x01,
-   0x00}}, /* 0x2b */
- {{0x40,0xef,0xef,0x84,0x03,0x1d,0xda,0x1f,
-   0xa0,0x83,0x9f,0x9f,0xdb,0x1f,0x41,0x01,
-   0x00}}, /* 0x2c */
- {{0x59,0xff,0xff,0x9d,0x17,0x13,0x33,0xba,
-   0x00,0x83,0xff,0xff,0x34,0x0f,0x41,0x05,
-   0x44}}, /* 0x2d */
- {{0x5b,0xff,0xff,0x9f,0x18,0x14,0x38,0xba,
-   0x00,0x83,0xff,0xff,0x39,0x0f,0x41,0x05,
-   0x44}}, /* 0x2e */
- {{0x5b,0xff,0xff,0x9f,0x18,0x14,0x3d,0xba,
-   0x00,0x83,0xff,0xff,0x3e,0x0f,0x41,0x05,
-   0x44}}, /* 0x2f */
- {{0x5d,0xff,0xff,0x81,0x19,0x95,0x41,0xba,
-   0x00,0x84,0xff,0xff,0x42,0x0f,0x41,0x05,
-   0x44}}, /* 0x30 */
- {{0x55,0xff,0xff,0x99,0x0d,0x0c,0x3e,0xba,
-   0x00,0x84,0xff,0xff,0x3f,0x0f,0x41,0x05,
-   0x00}}, /* 0x31 */
- {{0x7f,0x63,0x63,0x83,0x6c,0x1c,0x72,0xba,
-   0x27,0x8b,0xdf,0xdf,0x73,0x00,0x00,0x06,
-   0x01}}, /* 0x32 */
- {{0x7f,0x63,0x63,0x83,0x69,0x13,0x6f,0xba,
-   0x26,0x89,0xdf,0xdf,0x6f,0x00,0x00,0x06,
-   0x01}}, /* 0x33 */
- {{0x7f,0x63,0x63,0x82,0x6b,0x13,0x75,0xba,
-   0x29,0x8c,0xdf,0xdf,0x75,0x00,0x00,0x06,
-   0x01}}, /* 0x34 */
- {{0xa3,0x7f,0x7f,0x87,0x86,0x97,0x24,0xf1,
-   0xaf,0x85,0x3f,0x3f,0x25,0x30,0x00,0x02,
-   0x01}}, /* 0x35 */
- {{0x9f,0x7f,0x7f,0x83,0x85,0x91,0x1e,0xf1,
-   0xad,0x81,0x3f,0x3f,0x1f,0x30,0x00,0x02,
-   0x01}}, /* 0x36 */
- {{0xa7,0x7f,0x7f,0x88,0x89,0x95,0x26,0xf1,
-   0xb1,0x85,0x3f,0x3f,0x27,0x30,0x00,0x02,
-   0x01}}, /* 0x37 */
- {{0xce,0x9f,0x9f,0x92,0xa9,0x17,0x28,0xc4,
-   0x7a,0x8e,0xcf,0xcf,0x29,0x21,0x00,0x07,
-   0x01}}, /* 0x38 */
- {{0xce,0x9f,0x9f,0x92,0xa5,0x17,0x28,0xd4,
-   0x7a,0x8e,0xcf,0xcf,0x29,0x21,0x00,0x07,
-   0x01}}, /* 0x39 */
- {{0xd3,0x9f,0x9f,0x97,0xab,0x1f,0x2e,0xd4,
-   0x7d,0x81,0xcf,0xcf,0x2f,0x21,0x00,0x07,
-   0x01}}, /* 0x3a */
- {{0xdc,0x9f,0x9f,0x80,0xaf,0x9d,0xe6,0xff,
-   0xc0,0x83,0xbf,0xbf,0xe7,0x10,0x00,0x07,
-   0x01}}, /* 0x3b */
- {{0x6b,0x59,0x59,0x8f,0x5e,0x8c,0x0b,0x3e,
-   0xe9,0x8b,0xdf,0xe7,0x04,0x00,0x00,0x05,
-   0x00}}, /* 0x3c */
- {{0x6d,0x59,0x59,0x91,0x60,0x89,0x53,0xf0,
-   0x41,0x84,0x3f,0x3f,0x54,0x00,0x00,0x05,
-   0x41}}, /* 0x3d */
- {{0x86,0x6a,0x6a,0x8a,0x74,0x06,0x8c,0x15,
-   0x4f,0x83,0xef,0xef,0x8d,0x30,0x00,0x02,
-   0x00}}, /* 0x3e */
- {{0x81,0x6a,0x6a,0x85,0x70,0x00,0x0f,0x3e,
-   0xeb,0x8e,0xdf,0xdf,0x10,0x00,0x00,0x02,
-   0x00}}, /* 0x3f */
- {{0xa3,0x7f,0x7f,0x87,0x86,0x97,0x1e,0xf1,
-   0xae,0x85,0x57,0x57,0x1f,0x30,0x00,0x02,
-   0x01}},  /* 0x40 */
- {{0xa3,0x7f,0x7f,0x87,0x86,0x97,0x24,0xf5,
-   0x02,0x88,0xff,0xff,0x25,0x10,0x00,0x02,
-   0x01}},  /* 0x41 */
- {{0xce,0x9f,0x9f,0x92,0xa9,0x17,0x20,0xf5,
-   0x03,0x88,0xff,0xff,0x21,0x10,0x00,0x07,
-   0x01}},  /* 0x42 */
- {{0xe6,0xae,0xae,0x8a,0xbd,0x90,0x3d,0x10,
-   0x1a,0x8d,0x19,0x19,0x3e,0x2f,0x00,0x03,
-   0x00}},  /* 0x43 */
- {{0xc3,0x8f,0x8f,0x87,0x9b,0x0b,0x82,0xef,
-   0x60,0x83,0x5f,0x5f,0x83,0x10,0x00,0x07,
-   0x01}},  /* 0x44 */
- {{0x86,0x69,0x69,0x8A,0x74,0x06,0x8C,0x15,
-   0x4F,0x83,0xEF,0xEF,0x8D,0x30,0x00,0x02,
-   0x00}},  /* 0x45 */
- {{0x83,0x69,0x69,0x87,0x6f,0x1d,0x03,0x3E,
-   0xE5,0x8d,0xDF,0xe4,0x04,0x00,0x00,0x06,
-   0x00}},  /* 0x46 */
- {{0x86,0x6A,0x6A,0x8A,0x74,0x06,0x8C,0x15,
-   0x4F,0x83,0xEF,0xEF,0x8D,0x30,0x00,0x02,
-   0x00}},  /* 0x47 */
- {{0x81,0x6A,0x6A,0x85,0x70,0x00,0x0F,0x3E,
-   0xEB,0x8E,0xDF,0xDF,0x10,0x00,0x00,0x02,
-   0x00}},  /* 0x48 */
- {{0xdd,0xa9,0xa9,0x81,0xb4,0x97,0x26,0xfd,
-   0x01,0x8d,0xff,0x00,0x27,0x10,0x00,0x03,
-   0x01}},  /* 0x49 */
- {{0xd9,0x8f,0x8f,0x9d,0xba,0x0a,0x8a,0xff,
-   0x60,0x8b,0x5f,0x5f,0x8b,0x10,0x00,0x03,
-   0x01}},  /* 0x4a */
- {{0xea,0xae,0xae,0x8e,0xba,0x82,0x40,0x10,
-   0x1b,0x87,0x19,0x1a,0x41,0x0f,0x00,0x03,
-   0x00}},  /* 0x4b */
- {{0xd3,0x9f,0x9f,0x97,0xab,0x1f,0xf1,0xff,
-   0xc0,0x83,0xbf,0xbf,0xf2,0x10,0x00,0x07,
-   0x01}},  /* 0x4c */
- {{0x75,0x5f,0x5f,0x99,0x66,0x90,0x53,0xf0,
-   0x41,0x84,0x3f,0x3f,0x54,0x00,0x00,0x05,
-   0x41}},
- {{0x2d,0x27,0x28,0x90,0x2c,0x80,0x0b,0x3e,
-   0xe9,0x8b,0xdf,0xe7,0x04,0x00,0x00,0x00,
-   0x00}},  /* 0x4e */
- {{0xcd,0x9f,0x9f,0x91,0xab,0x1c,0x3a,0xff,
-   0x20,0x83,0x1f,0x1f,0x3b,0x10,0x00,0x07,
-   0x21}},  /* 0x4f */
- {{0x15,0xd1,0xd1,0x99,0xe2,0x19,0x3d,0x10,
-   0x1a,0x8d,0x19,0x19,0x3e,0x2f,0x01,0x0c,
-   0x20}},  /* 0x50 */
- {{0x0e,0xef,0xef,0x92,0xfe,0x03,0x30,0xf0,
-   0x1e,0x83,0x1b,0x1c,0x31,0x00,0x01,0x00,
-   0x61}},  /* 0x51 */
- {{0x85,0x77,0x77,0x89,0x7d,0x01,0x31,0xf0,
-   0x1e,0x84,0x1b,0x1c,0x32,0x00,0x00,0x02,
-   0x41}},  /* 0x52 */
- {{0x87,0x77,0x77,0x8b,0x81,0x0b,0x68,0xf0,
-   0x5a,0x80,0x57,0x57,0x69,0x00,0x00,0x02,
-   0x01}},  /* 0x53 */
- {{0xcd,0x8f,0x8f,0x91,0x9b,0x1b,0x7a,0xff,
-   0x64,0x8c,0x5f,0x62,0x7b,0x10,0x00,0x07,
-   0x41}}   /* 0x54 */
+static const struct SiS_CRT1Table SiSUSB_CRT1Table[] = {
+        {{0x2d, 0x27, 0x28, 0x90, 0x2c, 0x80, 0xbf, 0x1f,
+          0x9c, 0x8e, 0x8f, 0x96, 0xb9, 0x30, 0x00, 0x00,
+          0x00}},               /* 0x0 */
+        {{0x2d, 0x27, 0x28, 0x90, 0x2c, 0x80, 0x0b, 0x3e,
+          0xe9, 0x8b, 0xdf, 0xe7, 0x04, 0x00, 0x00, 0x00,
+          0x00}},               /* 0x1 */
+        {{0x3d, 0x31, 0x31, 0x81, 0x37, 0x1f, 0x72, 0xf0,
+          0x58, 0x8c, 0x57, 0x57, 0x73, 0x20, 0x00, 0x05,
+          0x01}},               /* 0x2 */
+        {{0x4f, 0x3f, 0x3f, 0x93, 0x45, 0x0d, 0x24, 0xf5,
+          0x02, 0x88, 0xff, 0xff, 0x25, 0x10, 0x00, 0x01,
+          0x01}},               /* 0x3 */
+        {{0x5f, 0x4f, 0x50, 0x82, 0x55, 0x81, 0xbf, 0x1f,
+          0x9c, 0x8e, 0x8f, 0x96, 0xb9, 0x30, 0x00, 0x05,
+          0x00}},               /* 0x4 */
+        {{0x5f, 0x4f, 0x4f, 0x83, 0x55, 0x81, 0x0b, 0x3e,
+          0xe9, 0x8b, 0xdf, 0xe8, 0x0c, 0x00, 0x00, 0x05,
+          0x00}},               /* 0x5 */
+        {{0x63, 0x4f, 0x4f, 0x87, 0x56, 0x9b, 0x06, 0x3e,
+          0xe8, 0x8a, 0xdf, 0xe7, 0x07, 0x00, 0x00, 0x01,
+          0x00}},               /* 0x6 */
+        {{0x64, 0x4f, 0x4f, 0x88, 0x55, 0x9d, 0xf2, 0x1f,
+          0xe0, 0x83, 0xdf, 0xdf, 0xf3, 0x10, 0x00, 0x01,
+          0x00}},               /* 0x7 */
+        {{0x63, 0x4f, 0x4f, 0x87, 0x5a, 0x81, 0xfb, 0x1f,
+          0xe0, 0x83, 0xdf, 0xdf, 0xfc, 0x10, 0x00, 0x05,
+          0x00}},               /* 0x8 */
+        {{0x65, 0x4f, 0x4f, 0x89, 0x58, 0x80, 0xfb, 0x1f,
+          0xe0, 0x83, 0xdf, 0xdf, 0xfc, 0x10, 0x00, 0x05,
+          0x61}},               /* 0x9 */
+        {{0x65, 0x4f, 0x4f, 0x89, 0x58, 0x80, 0x01, 0x3e,
+          0xe0, 0x83, 0xdf, 0xdf, 0x02, 0x00, 0x00, 0x05,
+          0x61}},               /* 0xa */
+        {{0x67, 0x4f, 0x4f, 0x8b, 0x58, 0x81, 0x0d, 0x3e,
+          0xe0, 0x83, 0xdf, 0xdf, 0x0e, 0x00, 0x00, 0x05,
+          0x61}},               /* 0xb */
+        {{0x65, 0x4f, 0x4f, 0x89, 0x57, 0x9f, 0xfb, 0x1f,
+          0xe6, 0x8a, 0xdf, 0xdf, 0xfc, 0x10, 0x00, 0x01,
+          0x00}},               /* 0xc */
+        {{0x7b, 0x63, 0x63, 0x9f, 0x6a, 0x93, 0x6f, 0xf0,
+          0x58, 0x8a, 0x57, 0x57, 0x70, 0x20, 0x00, 0x05,
+          0x01}},               /* 0xd */
+        {{0x7f, 0x63, 0x63, 0x83, 0x6c, 0x1c, 0x72, 0xf0,
+          0x58, 0x8c, 0x57, 0x57, 0x73, 0x20, 0x00, 0x06,
+          0x01}},               /* 0xe */
+        {{0x7d, 0x63, 0x63, 0x81, 0x6e, 0x1d, 0x98, 0xf0,
+          0x7c, 0x82, 0x57, 0x57, 0x99, 0x00, 0x00, 0x06,
+          0x01}},               /* 0xf */
+        {{0x7f, 0x63, 0x63, 0x83, 0x69, 0x13, 0x6f, 0xf0,
+          0x58, 0x8b, 0x57, 0x57, 0x70, 0x20, 0x00, 0x06,
+          0x01}},               /* 0x10 */
+        {{0x7e, 0x63, 0x63, 0x82, 0x6b, 0x13, 0x75, 0xf0,
+          0x58, 0x8b, 0x57, 0x57, 0x76, 0x20, 0x00, 0x06,
+          0x01}},               /* 0x11 */
+        {{0x81, 0x63, 0x63, 0x85, 0x6d, 0x18, 0x7a, 0xf0,
+          0x58, 0x8b, 0x57, 0x57, 0x7b, 0x20, 0x00, 0x06,
+          0x61}},               /* 0x12 */
+        {{0x83, 0x63, 0x63, 0x87, 0x6e, 0x19, 0x81, 0xf0,
+          0x58, 0x8b, 0x57, 0x57, 0x82, 0x20, 0x00, 0x06,
+          0x61}},               /* 0x13 */
+        {{0x85, 0x63, 0x63, 0x89, 0x6f, 0x1a, 0x91, 0xf0,
+          0x58, 0x8b, 0x57, 0x57, 0x92, 0x20, 0x00, 0x06,
+          0x61}},               /* 0x14 */
+        {{0x99, 0x7f, 0x7f, 0x9d, 0x84, 0x1a, 0x96, 0x1f,
+          0x7f, 0x83, 0x7f, 0x7f, 0x97, 0x10, 0x00, 0x02,
+          0x00}},               /* 0x15 */
+        {{0xa3, 0x7f, 0x7f, 0x87, 0x86, 0x97, 0x24, 0xf5,
+          0x02, 0x88, 0xff, 0xff, 0x25, 0x10, 0x00, 0x02,
+          0x01}},               /* 0x16 */
+        {{0xa1, 0x7f, 0x7f, 0x85, 0x86, 0x97, 0x24, 0xf5,
+          0x02, 0x88, 0xff, 0xff, 0x25, 0x10, 0x00, 0x02,
+          0x01}},               /* 0x17 */
+        {{0x9f, 0x7f, 0x7f, 0x83, 0x85, 0x91, 0x1e, 0xf5,
+          0x00, 0x83, 0xff, 0xff, 0x1f, 0x10, 0x00, 0x02,
+          0x01}},               /* 0x18 */
+        {{0xa7, 0x7f, 0x7f, 0x8b, 0x89, 0x95, 0x26, 0xf5,
+          0x00, 0x83, 0xff, 0xff, 0x27, 0x10, 0x00, 0x02,
+          0x01}},               /* 0x19 */
+        {{0xa9, 0x7f, 0x7f, 0x8d, 0x8c, 0x9a, 0x2c, 0xf5,
+          0x00, 0x83, 0xff, 0xff, 0x2d, 0x14, 0x00, 0x02,
+          0x62}},               /* 0x1a */
+        {{0xab, 0x7f, 0x7f, 0x8f, 0x8d, 0x9b, 0x35, 0xf5,
+          0x00, 0x83, 0xff, 0xff, 0x36, 0x14, 0x00, 0x02,
+          0x62}},               /* 0x1b */
+        {{0xcf, 0x9f, 0x9f, 0x93, 0xb2, 0x01, 0x14, 0xba,
+          0x00, 0x83, 0xff, 0xff, 0x15, 0x00, 0x00, 0x03,
+          0x00}},               /* 0x1c */
+        {{0xce, 0x9f, 0x9f, 0x92, 0xa9, 0x17, 0x28, 0x5a,
+          0x00, 0x83, 0xff, 0xff, 0x29, 0x09, 0x00, 0x07,
+          0x01}},               /* 0x1d */
+        {{0xce, 0x9f, 0x9f, 0x92, 0xa5, 0x17, 0x28, 0x5a,
+          0x00, 0x83, 0xff, 0xff, 0x29, 0x09, 0x00, 0x07,
+          0x01}},               /* 0x1e */
+        {{0xd3, 0x9f, 0x9f, 0x97, 0xab, 0x1f, 0x2e, 0x5a,
+          0x00, 0x83, 0xff, 0xff, 0x2f, 0x09, 0x00, 0x07,
+          0x01}},               /* 0x1f */
+        {{0x09, 0xc7, 0xc7, 0x8d, 0xd3, 0x0b, 0xe0, 0x10,
+          0xb0, 0x83, 0xaf, 0xaf, 0xe1, 0x2f, 0x01, 0x04,
+          0x00}},               /* 0x20 */
+        {{0x09, 0xc7, 0xc7, 0x8d, 0xd3, 0x0b, 0xe0, 0x10,
+          0xb0, 0x83, 0xaf, 0xaf, 0xe1, 0x2f, 0x01, 0x04,
+          0x00}},               /* 0x21 */
+        {{0x09, 0xc7, 0xc7, 0x8d, 0xd3, 0x0b, 0xe0, 0x10,
+          0xb0, 0x83, 0xaf, 0xaf, 0xe1, 0x2f, 0x01, 0x04,
+          0x00}},               /* 0x22 */
+        {{0x09, 0xc7, 0xc7, 0x8d, 0xd3, 0x0b, 0xe0, 0x10,
+          0xb0, 0x83, 0xaf, 0xaf, 0xe1, 0x2f, 0x01, 0x04,
+          0x00}},               /* 0x23 */
+        {{0x09, 0xc7, 0xc7, 0x8d, 0xd3, 0x0b, 0xe0, 0x10,
+          0xb0, 0x83, 0xaf, 0xaf, 0xe1, 0x2f, 0x01, 0x04,
+          0x00}},               /* 0x24 */
+        {{0x09, 0xc7, 0xc7, 0x8d, 0xd3, 0x0b, 0xe0, 0x10,
+          0xb0, 0x83, 0xaf, 0xaf, 0xe1, 0x2f, 0x01, 0x04,
+          0x00}},               /* 0x25 */
+        {{0x09, 0xc7, 0xc7, 0x8d, 0xd3, 0x0b, 0xe0, 0x10,
+          0xb0, 0x83, 0xaf, 0xaf, 0xe1, 0x2f, 0x01, 0x04,
+          0x00}},               /* 0x26 */
+        {{0x40, 0xef, 0xef, 0x84, 0x03, 0x1d, 0xda, 0x1f,
+          0xa0, 0x83, 0x9f, 0x9f, 0xdb, 0x1f, 0x41, 0x01,
+          0x00}},               /* 0x27 */
+        {{0x43, 0xef, 0xef, 0x87, 0x06, 0x00, 0xd4, 0x1f,
+          0xa0, 0x83, 0x9f, 0x9f, 0xd5, 0x1f, 0x41, 0x05,
+          0x63}},               /* 0x28 */
+        {{0x45, 0xef, 0xef, 0x89, 0x07, 0x01, 0xd9, 0x1f,
+          0xa0, 0x83, 0x9f, 0x9f, 0xda, 0x1f, 0x41, 0x05,
+          0x63}},               /* 0x29 */
+        {{0x40, 0xef, 0xef, 0x84, 0x03, 0x1d, 0xda, 0x1f,
+          0xa0, 0x83, 0x9f, 0x9f, 0xdb, 0x1f, 0x41, 0x01,
+          0x00}},               /* 0x2a */
+        {{0x40, 0xef, 0xef, 0x84, 0x03, 0x1d, 0xda, 0x1f,
+          0xa0, 0x83, 0x9f, 0x9f, 0xdb, 0x1f, 0x41, 0x01,
+          0x00}},               /* 0x2b */
+        {{0x40, 0xef, 0xef, 0x84, 0x03, 0x1d, 0xda, 0x1f,
+          0xa0, 0x83, 0x9f, 0x9f, 0xdb, 0x1f, 0x41, 0x01,
+          0x00}},               /* 0x2c */
+        {{0x59, 0xff, 0xff, 0x9d, 0x17, 0x13, 0x33, 0xba,
+          0x00, 0x83, 0xff, 0xff, 0x34, 0x0f, 0x41, 0x05,
+          0x44}},               /* 0x2d */
+        {{0x5b, 0xff, 0xff, 0x9f, 0x18, 0x14, 0x38, 0xba,
+          0x00, 0x83, 0xff, 0xff, 0x39, 0x0f, 0x41, 0x05,
+          0x44}},               /* 0x2e */
+        {{0x5b, 0xff, 0xff, 0x9f, 0x18, 0x14, 0x3d, 0xba,
+          0x00, 0x83, 0xff, 0xff, 0x3e, 0x0f, 0x41, 0x05,
+          0x44}},               /* 0x2f */
+        {{0x5d, 0xff, 0xff, 0x81, 0x19, 0x95, 0x41, 0xba,
+          0x00, 0x84, 0xff, 0xff, 0x42, 0x0f, 0x41, 0x05,
+          0x44}},               /* 0x30 */
+        {{0x55, 0xff, 0xff, 0x99, 0x0d, 0x0c, 0x3e, 0xba,
+          0x00, 0x84, 0xff, 0xff, 0x3f, 0x0f, 0x41, 0x05,
+          0x00}},               /* 0x31 */
+        {{0x7f, 0x63, 0x63, 0x83, 0x6c, 0x1c, 0x72, 0xba,
+          0x27, 0x8b, 0xdf, 0xdf, 0x73, 0x00, 0x00, 0x06,
+          0x01}},               /* 0x32 */
+        {{0x7f, 0x63, 0x63, 0x83, 0x69, 0x13, 0x6f, 0xba,
+          0x26, 0x89, 0xdf, 0xdf, 0x6f, 0x00, 0x00, 0x06,
+          0x01}},               /* 0x33 */
+        {{0x7f, 0x63, 0x63, 0x82, 0x6b, 0x13, 0x75, 0xba,
+          0x29, 0x8c, 0xdf, 0xdf, 0x75, 0x00, 0x00, 0x06,
+          0x01}},               /* 0x34 */
+        {{0xa3, 0x7f, 0x7f, 0x87, 0x86, 0x97, 0x24, 0xf1,
+          0xaf, 0x85, 0x3f, 0x3f, 0x25, 0x30, 0x00, 0x02,
+          0x01}},               /* 0x35 */
+        {{0x9f, 0x7f, 0x7f, 0x83, 0x85, 0x91, 0x1e, 0xf1,
+          0xad, 0x81, 0x3f, 0x3f, 0x1f, 0x30, 0x00, 0x02,
+          0x01}},               /* 0x36 */
+        {{0xa7, 0x7f, 0x7f, 0x88, 0x89, 0x95, 0x26, 0xf1,
+          0xb1, 0x85, 0x3f, 0x3f, 0x27, 0x30, 0x00, 0x02,
+          0x01}},               /* 0x37 */
+        {{0xce, 0x9f, 0x9f, 0x92, 0xa9, 0x17, 0x28, 0xc4,
+          0x7a, 0x8e, 0xcf, 0xcf, 0x29, 0x21, 0x00, 0x07,
+          0x01}},               /* 0x38 */
+        {{0xce, 0x9f, 0x9f, 0x92, 0xa5, 0x17, 0x28, 0xd4,
+          0x7a, 0x8e, 0xcf, 0xcf, 0x29, 0x21, 0x00, 0x07,
+          0x01}},               /* 0x39 */
+        {{0xd3, 0x9f, 0x9f, 0x97, 0xab, 0x1f, 0x2e, 0xd4,
+          0x7d, 0x81, 0xcf, 0xcf, 0x2f, 0x21, 0x00, 0x07,
+          0x01}},               /* 0x3a */
+        {{0xdc, 0x9f, 0x9f, 0x80, 0xaf, 0x9d, 0xe6, 0xff,
+          0xc0, 0x83, 0xbf, 0xbf, 0xe7, 0x10, 0x00, 0x07,
+          0x01}},               /* 0x3b */
+        {{0x6b, 0x59, 0x59, 0x8f, 0x5e, 0x8c, 0x0b, 0x3e,
+          0xe9, 0x8b, 0xdf, 0xe7, 0x04, 0x00, 0x00, 0x05,
+          0x00}},               /* 0x3c */
+        {{0x6d, 0x59, 0x59, 0x91, 0x60, 0x89, 0x53, 0xf0,
+          0x41, 0x84, 0x3f, 0x3f, 0x54, 0x00, 0x00, 0x05,
+          0x41}},               /* 0x3d */
+        {{0x86, 0x6a, 0x6a, 0x8a, 0x74, 0x06, 0x8c, 0x15,
+          0x4f, 0x83, 0xef, 0xef, 0x8d, 0x30, 0x00, 0x02,
+          0x00}},               /* 0x3e */
+        {{0x81, 0x6a, 0x6a, 0x85, 0x70, 0x00, 0x0f, 0x3e,
+          0xeb, 0x8e, 0xdf, 0xdf, 0x10, 0x00, 0x00, 0x02,
+          0x00}},               /* 0x3f */
+        {{0xa3, 0x7f, 0x7f, 0x87, 0x86, 0x97, 0x1e, 0xf1,
+          0xae, 0x85, 0x57, 0x57, 0x1f, 0x30, 0x00, 0x02,
+          0x01}},               /* 0x40 */
+        {{0xa3, 0x7f, 0x7f, 0x87, 0x86, 0x97, 0x24, 0xf5,
+          0x02, 0x88, 0xff, 0xff, 0x25, 0x10, 0x00, 0x02,
+          0x01}},               /* 0x41 */
+        {{0xce, 0x9f, 0x9f, 0x92, 0xa9, 0x17, 0x20, 0xf5,
+          0x03, 0x88, 0xff, 0xff, 0x21, 0x10, 0x00, 0x07,
+          0x01}},               /* 0x42 */
+        {{0xe6, 0xae, 0xae, 0x8a, 0xbd, 0x90, 0x3d, 0x10,
+          0x1a, 0x8d, 0x19, 0x19, 0x3e, 0x2f, 0x00, 0x03,
+          0x00}},               /* 0x43 */
+        {{0xc3, 0x8f, 0x8f, 0x87, 0x9b, 0x0b, 0x82, 0xef,
+          0x60, 0x83, 0x5f, 0x5f, 0x83, 0x10, 0x00, 0x07,
+          0x01}},               /* 0x44 */
+        {{0x86, 0x69, 0x69, 0x8A, 0x74, 0x06, 0x8C, 0x15,
+          0x4F, 0x83, 0xEF, 0xEF, 0x8D, 0x30, 0x00, 0x02,
+          0x00}},               /* 0x45 */
+        {{0x83, 0x69, 0x69, 0x87, 0x6f, 0x1d, 0x03, 0x3E,
+          0xE5, 0x8d, 0xDF, 0xe4, 0x04, 0x00, 0x00, 0x06,
+          0x00}},               /* 0x46 */
+        {{0x86, 0x6A, 0x6A, 0x8A, 0x74, 0x06, 0x8C, 0x15,
+          0x4F, 0x83, 0xEF, 0xEF, 0x8D, 0x30, 0x00, 0x02,
+          0x00}},               /* 0x47 */
+        {{0x81, 0x6A, 0x6A, 0x85, 0x70, 0x00, 0x0F, 0x3E,
+          0xEB, 0x8E, 0xDF, 0xDF, 0x10, 0x00, 0x00, 0x02,
+          0x00}},               /* 0x48 */
+        {{0xdd, 0xa9, 0xa9, 0x81, 0xb4, 0x97, 0x26, 0xfd,
+          0x01, 0x8d, 0xff, 0x00, 0x27, 0x10, 0x00, 0x03,
+          0x01}},               /* 0x49 */
+        {{0xd9, 0x8f, 0x8f, 0x9d, 0xba, 0x0a, 0x8a, 0xff,
+          0x60, 0x8b, 0x5f, 0x5f, 0x8b, 0x10, 0x00, 0x03,
+          0x01}},               /* 0x4a */
+        {{0xea, 0xae, 0xae, 0x8e, 0xba, 0x82, 0x40, 0x10,
+          0x1b, 0x87, 0x19, 0x1a, 0x41, 0x0f, 0x00, 0x03,
+          0x00}},               /* 0x4b */
+        {{0xd3, 0x9f, 0x9f, 0x97, 0xab, 0x1f, 0xf1, 0xff,
+          0xc0, 0x83, 0xbf, 0xbf, 0xf2, 0x10, 0x00, 0x07,
+          0x01}},               /* 0x4c */
+        {{0x75, 0x5f, 0x5f, 0x99, 0x66, 0x90, 0x53, 0xf0,
+          0x41, 0x84, 0x3f, 0x3f, 0x54, 0x00, 0x00, 0x05,
+          0x41}},
+        {{0x2d, 0x27, 0x28, 0x90, 0x2c, 0x80, 0x0b, 0x3e,
+          0xe9, 0x8b, 0xdf, 0xe7, 0x04, 0x00, 0x00, 0x00,
+          0x00}},               /* 0x4e */
+        {{0xcd, 0x9f, 0x9f, 0x91, 0xab, 0x1c, 0x3a, 0xff,
+          0x20, 0x83, 0x1f, 0x1f, 0x3b, 0x10, 0x00, 0x07,
+          0x21}},               /* 0x4f */
+        {{0x15, 0xd1, 0xd1, 0x99, 0xe2, 0x19, 0x3d, 0x10,
+          0x1a, 0x8d, 0x19, 0x19, 0x3e, 0x2f, 0x01, 0x0c,
+          0x20}},               /* 0x50 */
+        {{0x0e, 0xef, 0xef, 0x92, 0xfe, 0x03, 0x30, 0xf0,
+          0x1e, 0x83, 0x1b, 0x1c, 0x31, 0x00, 0x01, 0x00,
+          0x61}},               /* 0x51 */
+        {{0x85, 0x77, 0x77, 0x89, 0x7d, 0x01, 0x31, 0xf0,
+          0x1e, 0x84, 0x1b, 0x1c, 0x32, 0x00, 0x00, 0x02,
+          0x41}},               /* 0x52 */
+        {{0x87, 0x77, 0x77, 0x8b, 0x81, 0x0b, 0x68, 0xf0,
+          0x5a, 0x80, 0x57, 0x57, 0x69, 0x00, 0x00, 0x02,
+          0x01}},               /* 0x53 */
+        {{0xcd, 0x8f, 0x8f, 0x91, 0x9b, 0x1b, 0x7a, 0xff,
+          0x64, 0x8c, 0x5f, 0x62, 0x7b, 0x10, 0x00, 0x07,
+          0x41}}                /* 0x54 */
 };
 
-static const struct SiS_VCLKData SiSUSB_VCLKData[] =
-{
-        { 0x1b,0xe1, 25}, /* 0x00 */
-        { 0x4e,0xe4, 28}, /* 0x01 */
-        { 0x57,0xe4, 31}, /* 0x02 */
-        { 0xc3,0xc8, 36}, /* 0x03 */
-        { 0x42,0xe2, 40}, /* 0x04 */
-        { 0xfe,0xcd, 43}, /* 0x05 */
-        { 0x5d,0xc4, 44}, /* 0x06 */
-        { 0x52,0xe2, 49}, /* 0x07 */
-        { 0x53,0xe2, 50}, /* 0x08 */
-        { 0x74,0x67, 52}, /* 0x09 */
-        { 0x6d,0x66, 56}, /* 0x0a */
-        { 0x5a,0x64, 65}, /* 0x0b */
-        { 0x46,0x44, 67}, /* 0x0c */
-        { 0xb1,0x46, 68}, /* 0x0d */
-        { 0xd3,0x4a, 72}, /* 0x0e */
-        { 0x29,0x61, 75}, /* 0x0f */
-        { 0x6e,0x46, 76}, /* 0x10 */
-        { 0x2b,0x61, 78}, /* 0x11 */
-        { 0x31,0x42, 79}, /* 0x12 */
-        { 0xab,0x44, 83}, /* 0x13 */
-        { 0x46,0x25, 84}, /* 0x14 */
-        { 0x78,0x29, 86}, /* 0x15 */
-        { 0x62,0x44, 94}, /* 0x16 */
-        { 0x2b,0x41,104}, /* 0x17 */
-        { 0x3a,0x23,105}, /* 0x18 */
-        { 0x70,0x44,108}, /* 0x19 */
-        { 0x3c,0x23,109}, /* 0x1a */
-        { 0x5e,0x43,113}, /* 0x1b */
-        { 0xbc,0x44,116}, /* 0x1c */
-        { 0xe0,0x46,132}, /* 0x1d */
-        { 0x54,0x42,135}, /* 0x1e */
-        { 0xea,0x2a,139}, /* 0x1f */
-        { 0x41,0x22,157}, /* 0x20 */
-        { 0x70,0x24,162}, /* 0x21 */
-        { 0x30,0x21,175}, /* 0x22 */
-        { 0x4e,0x22,189}, /* 0x23 */
-        { 0xde,0x26,194}, /* 0x24 */
-        { 0x62,0x06,202}, /* 0x25 */
-        { 0x3f,0x03,229}, /* 0x26 */
-        { 0xb8,0x06,234}, /* 0x27 */
-        { 0x34,0x02,253}, /* 0x28 */
-        { 0x58,0x04,255}, /* 0x29 */
-        { 0x24,0x01,265}, /* 0x2a */
-        { 0x9b,0x02,267}, /* 0x2b */
-        { 0x70,0x05,270}, /* 0x2c */
-        { 0x25,0x01,272}, /* 0x2d */
-        { 0x9c,0x02,277}, /* 0x2e */
-        { 0x27,0x01,286}, /* 0x2f */
-        { 0x3c,0x02,291}, /* 0x30 */
-        { 0xef,0x0a,292}, /* 0x31 */
-        { 0xf6,0x0a,310}, /* 0x32 */
-        { 0x95,0x01,315}, /* 0x33 */
-        { 0xf0,0x09,324}, /* 0x34 */
-        { 0xfe,0x0a,331}, /* 0x35 */
-        { 0xf3,0x09,332}, /* 0x36 */
-        { 0xea,0x08,340}, /* 0x37 */
-        { 0xe8,0x07,376}, /* 0x38 */
-        { 0xde,0x06,389}, /* 0x39 */
-        { 0x52,0x2a, 54}, /* 0x3a 301 TV */
-        { 0x52,0x6a, 27}, /* 0x3b 301 TV */
-        { 0x62,0x24, 70}, /* 0x3c 301 TV */
-        { 0x62,0x64, 70}, /* 0x3d 301 TV */
-        { 0xa8,0x4c, 30}, /* 0x3e 301 TV */
-        { 0x20,0x26, 33}, /* 0x3f 301 TV */
-        { 0x31,0xc2, 39}, /* 0x40 */
-        { 0x60,0x36, 30}, /* 0x41 Chrontel */
-        { 0x40,0x4a, 28}, /* 0x42 Chrontel */
-        { 0x9f,0x46, 44}, /* 0x43 Chrontel */
-        { 0x97,0x2c, 26}, /* 0x44 */
-        { 0x44,0xe4, 25}, /* 0x45 Chrontel */
-        { 0x7e,0x32, 47}, /* 0x46 Chrontel */
-        { 0x8a,0x24, 31}, /* 0x47 Chrontel */
-        { 0x97,0x2c, 26}, /* 0x48 Chrontel */
-        { 0xce,0x3c, 39}, /* 0x49 */
-        { 0x52,0x4a, 36}, /* 0x4a Chrontel */
-        { 0x34,0x61, 95}, /* 0x4b */
-        { 0x78,0x27,108}, /* 0x4c - was 102 */
-        { 0x66,0x43,123}, /* 0x4d Modes 0x26-0x28 (1400x1050) */
-        { 0x41,0x4e, 21}, /* 0x4e */
-        { 0xa1,0x4a, 29}, /* 0x4f Chrontel */
-        { 0x19,0x42, 42}, /* 0x50 */
-        { 0x54,0x46, 58}, /* 0x51 Chrontel */
-        { 0x25,0x42, 61}, /* 0x52 */
-        { 0x44,0x44, 66}, /* 0x53 Chrontel */
-        { 0x3a,0x62, 70}, /* 0x54 Chrontel */
-        { 0x62,0xc6, 34}, /* 0x55 848x480-60 */
-        { 0x6a,0xc6, 37}, /* 0x56 848x480-75 - TEMP */
-        { 0xbf,0xc8, 35}, /* 0x57 856x480-38i,60 */
-        { 0x30,0x23, 88}, /* 0x58 1360x768-62 (is 60Hz!) */
-        { 0x52,0x07,149}, /* 0x59 1280x960-85 */
-        { 0x56,0x07,156}, /* 0x5a 1400x1050-75 */
-        { 0x70,0x29, 81}, /* 0x5b 1280x768 LCD */
-        { 0x45,0x25, 83}, /* 0x5c 1280x800  */
-        { 0x70,0x0a,147}, /* 0x5d 1680x1050 */
-        { 0x70,0x24,162}, /* 0x5e 1600x1200 */
-        { 0x5a,0x64, 65}, /* 0x5f 1280x720 - temp */
-        { 0x63,0x46, 68}, /* 0x60 1280x768_2 */
-        { 0x31,0x42, 79}, /* 0x61 1280x768_3 - temp */
-        {    0,   0,  0}, /* 0x62 - custom (will be filled out at run-time) */
-        { 0x5a,0x64, 65}, /* 0x63 1280x720 (LCD LVDS) */
-        { 0x70,0x28, 90}, /* 0x64 1152x864@60 */
-        { 0x41,0xc4, 32}, /* 0x65 848x480@60 */
-        { 0x5c,0xc6, 32}, /* 0x66 856x480@60 */
-        { 0x76,0xe7, 27}, /* 0x67 720x480@60 */
-        { 0x5f,0xc6, 33}, /* 0x68 720/768x576@60 */
-        { 0x52,0x27, 75}, /* 0x69 1920x1080i 60Hz interlaced */
-        { 0x7c,0x6b, 38}, /* 0x6a 960x540@60 */
-        { 0xe3,0x56, 41}, /* 0x6b 960x600@60 */
-        { 0x45,0x25, 83}, /* 0x6c 1280x800 */
-        { 0x70,0x28, 90}, /* 0x6d 1152x864@60 */
-        { 0x15,0xe1, 20}, /* 0x6e 640x400@60 (fake, not actually used) */
-        { 0x5f,0xc6, 33}, /* 0x6f 720x576@60 */
-        { 0x37,0x5a, 10}, /* 0x70 320x200@60 (fake, not actually used) */
-        { 0x2b,0xc2, 35}  /* 0x71 768@576@60 */
+static const struct SiS_VCLKData SiSUSB_VCLKData[] = {
+        {0x1b, 0xe1, 25},       /* 0x00 */
+        {0x4e, 0xe4, 28},       /* 0x01 */
+        {0x57, 0xe4, 31},       /* 0x02 */
+        {0xc3, 0xc8, 36},       /* 0x03 */
+        {0x42, 0xe2, 40},       /* 0x04 */
+        {0xfe, 0xcd, 43},       /* 0x05 */
+        {0x5d, 0xc4, 44},       /* 0x06 */
+        {0x52, 0xe2, 49},       /* 0x07 */
+        {0x53, 0xe2, 50},       /* 0x08 */
+        {0x74, 0x67, 52},       /* 0x09 */
+        {0x6d, 0x66, 56},       /* 0x0a */
+        {0x5a, 0x64, 65},       /* 0x0b */
+        {0x46, 0x44, 67},       /* 0x0c */
+        {0xb1, 0x46, 68},       /* 0x0d */
+        {0xd3, 0x4a, 72},       /* 0x0e */
+        {0x29, 0x61, 75},       /* 0x0f */
+        {0x6e, 0x46, 76},       /* 0x10 */
+        {0x2b, 0x61, 78},       /* 0x11 */
+        {0x31, 0x42, 79},       /* 0x12 */
+        {0xab, 0x44, 83},       /* 0x13 */
+        {0x46, 0x25, 84},       /* 0x14 */
+        {0x78, 0x29, 86},       /* 0x15 */
+        {0x62, 0x44, 94},       /* 0x16 */
+        {0x2b, 0x41, 104},      /* 0x17 */
+        {0x3a, 0x23, 105},      /* 0x18 */
+        {0x70, 0x44, 108},      /* 0x19 */
+        {0x3c, 0x23, 109},      /* 0x1a */
+        {0x5e, 0x43, 113},      /* 0x1b */
+        {0xbc, 0x44, 116},      /* 0x1c */
+        {0xe0, 0x46, 132},      /* 0x1d */
+        {0x54, 0x42, 135},      /* 0x1e */
+        {0xea, 0x2a, 139},      /* 0x1f */
+        {0x41, 0x22, 157},      /* 0x20 */
+        {0x70, 0x24, 162},      /* 0x21 */
+        {0x30, 0x21, 175},      /* 0x22 */
+        {0x4e, 0x22, 189},      /* 0x23 */
+        {0xde, 0x26, 194},      /* 0x24 */
+        {0x62, 0x06, 202},      /* 0x25 */
+        {0x3f, 0x03, 229},      /* 0x26 */
+        {0xb8, 0x06, 234},      /* 0x27 */
+        {0x34, 0x02, 253},      /* 0x28 */
+        {0x58, 0x04, 255},      /* 0x29 */
+        {0x24, 0x01, 265},      /* 0x2a */
+        {0x9b, 0x02, 267},      /* 0x2b */
+        {0x70, 0x05, 270},      /* 0x2c */
+        {0x25, 0x01, 272},      /* 0x2d */
+        {0x9c, 0x02, 277},      /* 0x2e */
+        {0x27, 0x01, 286},      /* 0x2f */
+        {0x3c, 0x02, 291},      /* 0x30 */
+        {0xef, 0x0a, 292},      /* 0x31 */
+        {0xf6, 0x0a, 310},      /* 0x32 */
+        {0x95, 0x01, 315},      /* 0x33 */
+        {0xf0, 0x09, 324},      /* 0x34 */
+        {0xfe, 0x0a, 331},      /* 0x35 */
+        {0xf3, 0x09, 332},      /* 0x36 */
+        {0xea, 0x08, 340},      /* 0x37 */
+        {0xe8, 0x07, 376},      /* 0x38 */
+        {0xde, 0x06, 389},      /* 0x39 */
+        {0x52, 0x2a, 54},       /* 0x3a 301 TV */
+        {0x52, 0x6a, 27},       /* 0x3b 301 TV */
+        {0x62, 0x24, 70},       /* 0x3c 301 TV */
+        {0x62, 0x64, 70},       /* 0x3d 301 TV */
+        {0xa8, 0x4c, 30},       /* 0x3e 301 TV */
+        {0x20, 0x26, 33},       /* 0x3f 301 TV */
+        {0x31, 0xc2, 39},       /* 0x40 */
+        {0x60, 0x36, 30},       /* 0x41 Chrontel */
+        {0x40, 0x4a, 28},       /* 0x42 Chrontel */
+        {0x9f, 0x46, 44},       /* 0x43 Chrontel */
+        {0x97, 0x2c, 26},       /* 0x44 */
+        {0x44, 0xe4, 25},       /* 0x45 Chrontel */
+        {0x7e, 0x32, 47},       /* 0x46 Chrontel */
+        {0x8a, 0x24, 31},       /* 0x47 Chrontel */
+        {0x97, 0x2c, 26},       /* 0x48 Chrontel */
+        {0xce, 0x3c, 39},       /* 0x49 */
+        {0x52, 0x4a, 36},       /* 0x4a Chrontel */
+        {0x34, 0x61, 95},       /* 0x4b */
+        {0x78, 0x27, 108},      /* 0x4c - was 102 */
+        {0x66, 0x43, 123},      /* 0x4d Modes 0x26-0x28 (1400x1050) */
+        {0x41, 0x4e, 21},       /* 0x4e */
+        {0xa1, 0x4a, 29},       /* 0x4f Chrontel */
+        {0x19, 0x42, 42},       /* 0x50 */
+        {0x54, 0x46, 58},       /* 0x51 Chrontel */
+        {0x25, 0x42, 61},       /* 0x52 */
+        {0x44, 0x44, 66},       /* 0x53 Chrontel */
+        {0x3a, 0x62, 70},       /* 0x54 Chrontel */
+        {0x62, 0xc6, 34},       /* 0x55 848x480-60 */
+        {0x6a, 0xc6, 37},       /* 0x56 848x480-75 - TEMP */
+        {0xbf, 0xc8, 35},       /* 0x57 856x480-38i,60 */
+        {0x30, 0x23, 88},       /* 0x58 1360x768-62 (is 60Hz!) */
+        {0x52, 0x07, 149},      /* 0x59 1280x960-85 */
+        {0x56, 0x07, 156},      /* 0x5a 1400x1050-75 */
+        {0x70, 0x29, 81},       /* 0x5b 1280x768 LCD */
+        {0x45, 0x25, 83},       /* 0x5c 1280x800  */
+        {0x70, 0x0a, 147},      /* 0x5d 1680x1050 */
+        {0x70, 0x24, 162},      /* 0x5e 1600x1200 */
+        {0x5a, 0x64, 65},       /* 0x5f 1280x720 - temp */
+        {0x63, 0x46, 68},       /* 0x60 1280x768_2 */
+        {0x31, 0x42, 79},       /* 0x61 1280x768_3 - temp */
+        {0, 0, 0},              /* 0x62 - custom (will be filled out at run-time) */
+        {0x5a, 0x64, 65},       /* 0x63 1280x720 (LCD LVDS) */
+        {0x70, 0x28, 90},       /* 0x64 1152x864@60 */
+        {0x41, 0xc4, 32},       /* 0x65 848x480@60 */
+        {0x5c, 0xc6, 32},       /* 0x66 856x480@60 */
+        {0x76, 0xe7, 27},       /* 0x67 720x480@60 */
+        {0x5f, 0xc6, 33},       /* 0x68 720/768x576@60 */
+        {0x52, 0x27, 75},       /* 0x69 1920x1080i 60Hz interlaced */
+        {0x7c, 0x6b, 38},       /* 0x6a 960x540@60 */
+        {0xe3, 0x56, 41},       /* 0x6b 960x600@60 */
+        {0x45, 0x25, 83},       /* 0x6c 1280x800 */
+        {0x70, 0x28, 90},       /* 0x6d 1152x864@60 */
+        {0x15, 0xe1, 20},       /* 0x6e 640x400@60 (fake, not actually used) */
+        {0x5f, 0xc6, 33},       /* 0x6f 720x576@60 */
+        {0x37, 0x5a, 10},       /* 0x70 320x200@60 (fake, not actually used) */
+        {0x2b, 0xc2, 35}        /* 0x71 768@576@60 */
 };
 
-int             SiSUSBSetMode(struct SiS_Private *SiS_Pr, unsigned short ModeNo);
-int             SiSUSBSetVESAMode(struct SiS_Private *SiS_Pr, unsigned short VModeNo);
+int SiSUSBSetMode(struct SiS_Private *SiS_Pr, unsigned short ModeNo);
+int SiSUSBSetVESAMode(struct SiS_Private *SiS_Pr, unsigned short VModeNo);
 
-extern int      sisusb_setreg(struct sisusb_usb_data *sisusb, int port, u8 data);
-extern int      sisusb_getreg(struct sisusb_usb_data *sisusb, int port, u8 *data);
-extern int      sisusb_setidxreg(struct sisusb_usb_data *sisusb, int port,
-                                        u8 index, u8 data);
-extern int      sisusb_getidxreg(struct sisusb_usb_data *sisusb, int port,
-                                        u8 index, u8 *data);
-extern int      sisusb_setidxregandor(struct sisusb_usb_data *sisusb, int port,
-                                        u8 idx, u8 myand, u8 myor);
-extern int      sisusb_setidxregor(struct sisusb_usb_data *sisusb, int port,
-                                        u8 index, u8 myor);
-extern int      sisusb_setidxregand(struct sisusb_usb_data *sisusb, int port,
-                                        u8 idx, u8 myand);
+extern int sisusb_setreg(struct sisusb_usb_data *sisusb, int port, u8 data);
+extern int sisusb_getreg(struct sisusb_usb_data *sisusb, int port, u8 * data);
+extern int sisusb_setidxreg(struct sisusb_usb_data *sisusb, int port,
+                            u8 index, u8 data);
+extern int sisusb_getidxreg(struct sisusb_usb_data *sisusb, int port,
+                            u8 index, u8 * data);
+extern int sisusb_setidxregandor(struct sisusb_usb_data *sisusb, int port,
+                                 u8 idx, u8 myand, u8 myor);
+extern int sisusb_setidxregor(struct sisusb_usb_data *sisusb, int port,
+                              u8 index, u8 myor);
+extern int sisusb_setidxregand(struct sisusb_usb_data *sisusb, int port,
+                               u8 idx, u8 myand);
 
 void sisusb_delete(struct kref *kref);
 int sisusb_writeb(struct sisusb_usb_data *sisusb, u32 adr, u8 data);
-int sisusb_readb(struct sisusb_usb_data *sisusb, u32 adr, u8 *data);
+int sisusb_readb(struct sisusb_usb_data *sisusb, u32 adr, u8 * data);
 int sisusb_copy_memory(struct sisusb_usb_data *sisusb, char *src,
-                       u32 dest, int length, size_t *bytes_written);
+                       u32 dest, int length, size_t * bytes_written);
 int sisusb_reset_text_mode(struct sisusb_usb_data *sisusb, int init);
 int sisusbcon_do_font_op(struct sisusb_usb_data *sisusb, int set, int slot,
-                         u8 *arg, int cmapsz, int ch512, int dorecalc,
+                         u8 * arg, int cmapsz, int ch512, int dorecalc,
                          struct vc_data *c, int fh, int uplock);
 void sisusb_set_cursor(struct sisusb_usb_data *sisusb, unsigned int location);
 int sisusb_console_init(struct sisusb_usb_data *sisusb, int first, int last);
@@ -839,4 +839,3 @@ void sisusb_console_exit(struct sisusb_usb_data *sisusb);
 void sisusb_init_concode(void);
 
 #endif
-
diff --git a/drivers/usb/misc/sisusbvga/sisusb_struct.h b/drivers/usb/misc/sisusbvga/sisusb_struct.h
index f325ecb29a61..1c4240e802c1 100644
--- a/drivers/usb/misc/sisusbvga/sisusb_struct.h
+++ b/drivers/usb/misc/sisusbvga/sisusb_struct.h
@@ -44,7 +44,7 @@
  * * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
  * * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  *
- * Author:      Thomas Winischhofer <thomas@winischhofer.net>
+ * Author:      Thomas Winischhofer <thomas@winischhofer.net>
  *
  */
 
@@ -52,85 +52,78 @@
 #define _SISUSB_STRUCT_H_
 
 struct SiS_St {
-        unsigned char   St_ModeID;
-        unsigned short  St_ModeFlag;
-        unsigned char   St_StTableIndex;
-        unsigned char   St_CRT2CRTC;
-        unsigned char   St_ResInfo;
-        unsigned char   VB_StTVFlickerIndex;
-        unsigned char   VB_StTVEdgeIndex;
-        unsigned char   VB_StTVYFilterIndex;
-        unsigned char   St_PDC;
+        unsigned char St_ModeID;
+        unsigned short St_ModeFlag;
+        unsigned char St_StTableIndex;
+        unsigned char St_CRT2CRTC;
+        unsigned char St_ResInfo;
+        unsigned char VB_StTVFlickerIndex;
+        unsigned char VB_StTVEdgeIndex;
+        unsigned char VB_StTVYFilterIndex;
+        unsigned char St_PDC;
 };
 
-struct SiS_StandTable
-{
-        unsigned char   CRT_COLS;
-        unsigned char   ROWS;
-        unsigned char   CHAR_HEIGHT;
-        unsigned short  CRT_LEN;
-        unsigned char   SR[4];
-        unsigned char   MISC;
-        unsigned char   CRTC[0x19];
-        unsigned char   ATTR[0x14];
-        unsigned char   GRC[9];
+struct SiS_StandTable {
+        unsigned char CRT_COLS;
+        unsigned char ROWS;
+        unsigned char CHAR_HEIGHT;
+        unsigned short CRT_LEN;
+        unsigned char SR[4];
+        unsigned char MISC;
+        unsigned char CRTC[0x19];
+        unsigned char ATTR[0x14];
+        unsigned char GRC[9];
 };
 
 struct SiS_StResInfo_S {
-        unsigned short  HTotal;
-        unsigned short  VTotal;
+        unsigned short HTotal;
+        unsigned short VTotal;
 };
 
-struct SiS_Ext
-{
-        unsigned char   Ext_ModeID;
-        unsigned short  Ext_ModeFlag;
-        unsigned short  Ext_VESAID;
-        unsigned char   Ext_RESINFO;
-        unsigned char   VB_ExtTVFlickerIndex;
-        unsigned char   VB_ExtTVEdgeIndex;
-        unsigned char   VB_ExtTVYFilterIndex;
-        unsigned char   VB_ExtTVYFilterIndexROM661;
-        unsigned char   REFindex;
-        char            ROMMODEIDX661;
+struct SiS_Ext {
+        unsigned char Ext_ModeID;
+        unsigned short Ext_ModeFlag;
+        unsigned short Ext_VESAID;
+        unsigned char Ext_RESINFO;
+        unsigned char VB_ExtTVFlickerIndex;
+        unsigned char VB_ExtTVEdgeIndex;
+        unsigned char VB_ExtTVYFilterIndex;
+        unsigned char VB_ExtTVYFilterIndexROM661;
+        unsigned char REFindex;
+        char ROMMODEIDX661;
 };
 
-struct SiS_Ext2
-{
-        unsigned short  Ext_InfoFlag;
-        unsigned char   Ext_CRT1CRTC;
-        unsigned char   Ext_CRTVCLK;
-        unsigned char   Ext_CRT2CRTC;
-        unsigned char   Ext_CRT2CRTC_NS;
-        unsigned char   ModeID;
-        unsigned short  XRes;
-        unsigned short  YRes;
-        unsigned char   Ext_PDC;
-        unsigned char   Ext_FakeCRT2CRTC;
-        unsigned char   Ext_FakeCRT2Clk;
+struct SiS_Ext2 {
+        unsigned short Ext_InfoFlag;
+        unsigned char Ext_CRT1CRTC;
+        unsigned char Ext_CRTVCLK;
+        unsigned char Ext_CRT2CRTC;
+        unsigned char Ext_CRT2CRTC_NS;
+        unsigned char ModeID;
+        unsigned short XRes;
+        unsigned short YRes;
+        unsigned char Ext_PDC;
+        unsigned char Ext_FakeCRT2CRTC;
+        unsigned char Ext_FakeCRT2Clk;
 };
 
-struct SiS_CRT1Table
-{
-        unsigned char   CR[17];
+struct SiS_CRT1Table {
+        unsigned char CR[17];
 };
 
-struct SiS_VCLKData
-{
-        unsigned char   SR2B,SR2C;
-        unsigned short  CLOCK;
+struct SiS_VCLKData {
+        unsigned char SR2B, SR2C;
+        unsigned short CLOCK;
 };
 
-struct SiS_ModeResInfo
-{
-        unsigned short  HTotal;
-        unsigned short  VTotal;
-        unsigned char   XChar;
-        unsigned char   YChar;
+struct SiS_ModeResInfo {
+        unsigned short HTotal;
+        unsigned short VTotal;
+        unsigned char XChar;
+        unsigned char YChar;
 };
 
-struct SiS_Private
-{
+struct SiS_Private {
         void *sisusb;
 
         unsigned long IOAddress;
@@ -151,19 +144,18 @@ struct SiS_Private
         unsigned long SiS_P3da;
         unsigned long SiS_Part1Port;
 
-        unsigned char   SiS_MyCR63;
-        unsigned short  SiS_CRT1Mode;
-        unsigned short  SiS_ModeType;
-        unsigned short  SiS_SetFlag;
-
-        const struct SiS_StandTable     *SiS_StandTable;
-        const struct SiS_St             *SiS_SModeIDTable;
-        const struct SiS_Ext            *SiS_EModeIDTable;
-        const struct SiS_Ext2           *SiS_RefIndex;
-        const struct SiS_CRT1Table      *SiS_CRT1Table;
-        const struct SiS_VCLKData       *SiS_VCLKData;
-        const struct SiS_ModeResInfo    *SiS_ModeResInfo;
+        unsigned char SiS_MyCR63;
+        unsigned short SiS_CRT1Mode;
+        unsigned short SiS_ModeType;
+        unsigned short SiS_SetFlag;
+
+        const struct SiS_StandTable *SiS_StandTable;
+        const struct SiS_St *SiS_SModeIDTable;
+        const struct SiS_Ext *SiS_EModeIDTable;
+        const struct SiS_Ext2 *SiS_RefIndex;
+        const struct SiS_CRT1Table *SiS_CRT1Table;
+        const struct SiS_VCLKData *SiS_VCLKData;
+        const struct SiS_ModeResInfo *SiS_ModeResInfo;
 };
 
 #endif
-
diff --git a/drivers/usb/mon/mon_bin.c b/drivers/usb/mon/mon_bin.c
index c03dfd7a9d36..f06e4e2b49d3 100644
--- a/drivers/usb/mon/mon_bin.c
+++ b/drivers/usb/mon/mon_bin.c
@@ -172,6 +172,10 @@ static inline struct mon_bin_hdr *MON_OFF2HDR(const struct mon_reader_bin *rp,
 
 #define MON_RING_EMPTY(rp)      ((rp)->b_cnt == 0)
 
+static unsigned char xfer_to_pipe[4] = {
+        PIPE_CONTROL, PIPE_ISOCHRONOUS, PIPE_BULK, PIPE_INTERRUPT
+};
+
 static struct class *mon_bin_class;
 static dev_t mon_bin_dev0;
 static struct cdev mon_bin_cdev;
@@ -354,13 +358,9 @@ static inline char mon_bin_get_setup(unsigned char *setupb,
     const struct urb *urb, char ev_type)
 {
 
-        if (!usb_pipecontrol(urb->pipe) || ev_type != 'S')
+        if (!usb_endpoint_xfer_control(&urb->ep->desc) || ev_type != 'S')
                 return '-';
 
-        if (urb->dev->bus->uses_dma &&
-            (urb->transfer_flags & URB_NO_SETUP_DMA_MAP)) {
-                return mon_dmapeek(setupb, urb->setup_dma, SETUP_LEN);
-        }
         if (urb->setup_packet == NULL)
                 return 'Z';
 
@@ -386,13 +386,15 @@ static char mon_bin_get_data(const struct mon_reader_bin *rp,
 }
 
 static void mon_bin_event(struct mon_reader_bin *rp, struct urb *urb,
-    char ev_type)
+    char ev_type, int status)
 {
+        const struct usb_endpoint_descriptor *epd = &urb->ep->desc;
         unsigned long flags;
         struct timeval ts;
         unsigned int urb_length;
         unsigned int offset;
         unsigned int length;
+        unsigned char dir;
         struct mon_bin_hdr *ep;
         char data_tag = 0;
 
@@ -410,16 +412,19 @@ static void mon_bin_event(struct mon_reader_bin *rp, struct urb *urb,
         if (length >= rp->b_size/5)
                 length = rp->b_size/5;
 
-        if (usb_pipein(urb->pipe)) {
+        if (usb_urb_dir_in(urb)) {
                 if (ev_type == 'S') {
                         length = 0;
                         data_tag = '<';
                 }
+                /* Cannot rely on endpoint number in case of control ep.0 */
+                dir = USB_DIR_IN;
         } else {
                 if (ev_type == 'C') {
                         length = 0;
                         data_tag = '>';
                 }
+                dir = 0;
         }
 
         if (rp->mmap_active)
@@ -440,15 +445,14 @@ static void mon_bin_event(struct mon_reader_bin *rp, struct urb *urb,
          */
         memset(ep, 0, PKT_SIZE);
         ep->type = ev_type;
-        ep->xfer_type = usb_pipetype(urb->pipe);
-        /* We use the fact that usb_pipein() returns 0x80 */
-        ep->epnum = usb_pipeendpoint(urb->pipe) | usb_pipein(urb->pipe);
-        ep->devnum = usb_pipedevice(urb->pipe);
+        ep->xfer_type = xfer_to_pipe[usb_endpoint_type(epd)];
+        ep->epnum = dir | usb_endpoint_num(epd);
+        ep->devnum = urb->dev->devnum;
         ep->busnum = urb->dev->bus->busnum;
         ep->id = (unsigned long) urb;
         ep->ts_sec = ts.tv_sec;
         ep->ts_usec = ts.tv_usec;
-        ep->status = urb->status;
+        ep->status = status;
         ep->len_urb = urb_length;
         ep->len_cap = length;
 
@@ -471,13 +475,13 @@ static void mon_bin_event(struct mon_reader_bin *rp, struct urb *urb,
 static void mon_bin_submit(void *data, struct urb *urb)
 {
         struct mon_reader_bin *rp = data;
-        mon_bin_event(rp, urb, 'S');
+        mon_bin_event(rp, urb, 'S', -EINPROGRESS);
 }
 
-static void mon_bin_complete(void *data, struct urb *urb)
+static void mon_bin_complete(void *data, struct urb *urb, int status)
 {
         struct mon_reader_bin *rp = data;
-        mon_bin_event(rp, urb, 'C');
+        mon_bin_event(rp, urb, 'C', status);
 }
 
 static void mon_bin_error(void *data, struct urb *urb, int error)
@@ -500,10 +504,10 @@ static void mon_bin_error(void *data, struct urb *urb, int error)
 
         memset(ep, 0, PKT_SIZE);
         ep->type = 'E';
-        ep->xfer_type = usb_pipetype(urb->pipe);
-        /* We use the fact that usb_pipein() returns 0x80 */
-        ep->epnum = usb_pipeendpoint(urb->pipe) | usb_pipein(urb->pipe);
-        ep->devnum = usb_pipedevice(urb->pipe);
+        ep->xfer_type = xfer_to_pipe[usb_endpoint_type(&urb->ep->desc)];
+        ep->epnum = usb_urb_dir_in(urb) ? USB_DIR_IN : 0;
+        ep->epnum |= usb_endpoint_num(&urb->ep->desc);
+        ep->devnum = urb->dev->devnum;
         ep->busnum = urb->dev->bus->busnum;
         ep->id = (unsigned long) urb;
         ep->status = error;
diff --git a/drivers/usb/mon/mon_main.c b/drivers/usb/mon/mon_main.c
index ce61d8b0fd86..b371ffd39d36 100644
--- a/drivers/usb/mon/mon_main.c
+++ b/drivers/usb/mon/mon_main.c
@@ -129,7 +129,8 @@ static void mon_submit_error(struct usb_bus *ubus, struct urb *urb, int error)
 
 /*
  */
-static void mon_bus_complete(struct mon_bus *mbus, struct urb *urb)
+static void mon_bus_complete(struct mon_bus *mbus, struct urb *urb,
+                int status)
 {
         unsigned long flags;
         struct list_head *pos;
@@ -139,28 +140,18 @@ static void mon_bus_complete(struct mon_bus *mbus, struct urb *urb)
         mbus->cnt_events++;
         list_for_each (pos, &mbus->r_list) {
                 r = list_entry(pos, struct mon_reader, r_link);
-                r->rnf_complete(r->r_data, urb);
+                r->rnf_complete(r->r_data, urb, status);
         }
         spin_unlock_irqrestore(&mbus->lock, flags);
 }
 
-static void mon_complete(struct usb_bus *ubus, struct urb *urb)
+static void mon_complete(struct usb_bus *ubus, struct urb *urb, int status)
 {
         struct mon_bus *mbus;
 
-        mbus = ubus->mon_bus;
-        if (mbus == NULL) {
-                /*
-                 * This should not happen.
-                 * At this point we do not even know the bus number...
-                 */
-                printk(KERN_ERR TAG ": Null mon bus in URB, pipe 0x%x\n",
-                    urb->pipe);
-                return;
-        }
-
-        mon_bus_complete(mbus, urb);
-        mon_bus_complete(&mon_bus0, urb);
+        if ((mbus = ubus->mon_bus) != NULL)
+                mon_bus_complete(mbus, urb, status);
+        mon_bus_complete(&mon_bus0, urb, status);
 }
 
 /* int (*unlink_urb) (struct urb *urb, int status); */
@@ -170,7 +161,7 @@ static void mon_complete(struct usb_bus *ubus, struct urb *urb)
  */
 static void mon_stop(struct mon_bus *mbus)
 {
-        struct usb_bus *ubus = mbus->u_bus;
+        struct usb_bus *ubus;
         struct list_head *p;
 
         if (mbus == &mon_bus0) {
diff --git a/drivers/usb/mon/mon_text.c b/drivers/usb/mon/mon_text.c
index 8f27a9e1c36b..ebb04ac4857b 100644
--- a/drivers/usb/mon/mon_text.c
+++ b/drivers/usb/mon/mon_text.c
@@ -50,10 +50,13 @@ struct mon_iso_desc {
 struct mon_event_text {
         struct list_head e_link;
         int type;               /* submit, complete, etc. */
-        unsigned int pipe;      /* Pipe */
         unsigned long id;       /* From pointer, most of the time */
         unsigned int tstamp;
         int busnum;
+        char devnum;
+        char epnum;
+        char is_in;
+        char xfertype;
         int length;             /* Depends on type: xfer length or act length */
         int status;
         int interval;
@@ -121,13 +124,9 @@ static inline char mon_text_get_setup(struct mon_event_text *ep,
     struct urb *urb, char ev_type, struct mon_bus *mbus)
 {
 
-        if (!usb_pipecontrol(urb->pipe) || ev_type != 'S')
+        if (ep->xfertype != USB_ENDPOINT_XFER_CONTROL || ev_type != 'S')
                 return '-';
 
-        if (urb->dev->bus->uses_dma &&
-            (urb->transfer_flags & URB_NO_SETUP_DMA_MAP)) {
-                return mon_dmapeek(ep->setup, urb->setup_dma, SETUP_MAX);
-        }
         if (urb->setup_packet == NULL)
                 return 'Z';     /* '0' would be not as pretty. */
 
@@ -138,14 +137,12 @@ static inline char mon_text_get_setup(struct mon_event_text *ep,
 static inline char mon_text_get_data(struct mon_event_text *ep, struct urb *urb,
     int len, char ev_type, struct mon_bus *mbus)
 {
-        int pipe = urb->pipe;
-
         if (len <= 0)
                 return 'L';
         if (len >= DATA_MAX)
                 len = DATA_MAX;
 
-        if (usb_pipein(pipe)) {
+        if (ep->is_in) {
                 if (ev_type != 'C')
                         return '<';
         } else {
@@ -186,7 +183,7 @@ static inline unsigned int mon_get_timestamp(void)
 }
 
 static void mon_text_event(struct mon_reader_text *rp, struct urb *urb,
-    char ev_type)
+    char ev_type, int status)
 {
         struct mon_event_text *ep;
         unsigned int stamp;
@@ -203,24 +200,28 @@ static void mon_text_event(struct mon_reader_text *rp, struct urb *urb,
         }
 
         ep->type = ev_type;
-        ep->pipe = urb->pipe;
         ep->id = (unsigned long) urb;
         ep->busnum = urb->dev->bus->busnum;
+        ep->devnum = urb->dev->devnum;
+        ep->epnum = usb_endpoint_num(&urb->ep->desc);
+        ep->xfertype = usb_endpoint_type(&urb->ep->desc);
+        ep->is_in = usb_urb_dir_in(urb);
         ep->tstamp = stamp;
         ep->length = (ev_type == 'S') ?
             urb->transfer_buffer_length : urb->actual_length;
         /* Collecting status makes debugging sense for submits, too */
-        ep->status = urb->status;
+        ep->status = status;
 
-        if (usb_pipeint(urb->pipe)) {
+        if (ep->xfertype == USB_ENDPOINT_XFER_INT) {
                 ep->interval = urb->interval;
-        } else if (usb_pipeisoc(urb->pipe)) {
+        } else if (ep->xfertype == USB_ENDPOINT_XFER_ISOC) {
                 ep->interval = urb->interval;
                 ep->start_frame = urb->start_frame;
                 ep->error_count = urb->error_count;
         }
         ep->numdesc = urb->number_of_packets;
-        if (usb_pipeisoc(urb->pipe) && urb->number_of_packets > 0) {
+        if (ep->xfertype == USB_ENDPOINT_XFER_ISOC &&
+                        urb->number_of_packets > 0) {
                 if ((ndesc = urb->number_of_packets) > ISODESC_MAX)
                         ndesc = ISODESC_MAX;
                 fp = urb->iso_frame_desc;
@@ -247,13 +248,13 @@ static void mon_text_event(struct mon_reader_text *rp, struct urb *urb,
 static void mon_text_submit(void *data, struct urb *urb)
 {
         struct mon_reader_text *rp = data;
-        mon_text_event(rp, urb, 'S');
+        mon_text_event(rp, urb, 'S', -EINPROGRESS);
 }
 
-static void mon_text_complete(void *data, struct urb *urb)
+static void mon_text_complete(void *data, struct urb *urb, int status)
 {
         struct mon_reader_text *rp = data;
-        mon_text_event(rp, urb, 'C');
+        mon_text_event(rp, urb, 'C', status);
 }
 
 static void mon_text_error(void *data, struct urb *urb, int error)
@@ -268,9 +269,12 @@ static void mon_text_error(void *data, struct urb *urb, int error)
         }
 
         ep->type = 'E';
-        ep->pipe = urb->pipe;
         ep->id = (unsigned long) urb;
         ep->busnum = 0;
+        ep->devnum = urb->dev->devnum;
+        ep->epnum = usb_endpoint_num(&urb->ep->desc);
+        ep->xfertype = usb_endpoint_type(&urb->ep->desc);
+        ep->is_in = usb_urb_dir_in(urb);
         ep->tstamp = 0;
         ep->length = 0;
         ep->status = error;
@@ -413,10 +417,10 @@ static ssize_t mon_text_read_u(struct file *file, char __user *buf,
         mon_text_read_head_u(rp, &ptr, ep);
         if (ep->type == 'E') {
                 mon_text_read_statset(rp, &ptr, ep);
-        } else if (usb_pipeisoc(ep->pipe)) {
+        } else if (ep->xfertype == USB_ENDPOINT_XFER_ISOC) {
                 mon_text_read_isostat(rp, &ptr, ep);
                 mon_text_read_isodesc(rp, &ptr, ep);
-        } else if (usb_pipeint(ep->pipe)) {
+        } else if (ep->xfertype == USB_ENDPOINT_XFER_INT) {
                 mon_text_read_intstat(rp, &ptr, ep);
         } else {
                 mon_text_read_statset(rp, &ptr, ep);
@@ -468,18 +472,17 @@ static void mon_text_read_head_t(struct mon_reader_text *rp,
 {
         char udir, utype;
 
-        udir = usb_pipein(ep->pipe) ? 'i' : 'o';
-        switch (usb_pipetype(ep->pipe)) {
-        case PIPE_ISOCHRONOUS:  utype = 'Z'; break;
-        case PIPE_INTERRUPT:    utype = 'I'; break;
-        case PIPE_CONTROL:      utype = 'C'; break;
+        udir = (ep->is_in ? 'i' : 'o');
+        switch (ep->xfertype) {
+        case USB_ENDPOINT_XFER_ISOC:    utype = 'Z'; break;
+        case USB_ENDPOINT_XFER_INT:     utype = 'I'; break;
+        case USB_ENDPOINT_XFER_CONTROL: utype = 'C'; break;
         default: /* PIPE_BULK */  utype = 'B';
         }
         p->cnt += snprintf(p->pbuf + p->cnt, p->limit - p->cnt,
             "%lx %u %c %c%c:%03u:%02u",
             ep->id, ep->tstamp, ep->type,
-            utype, udir,
-            usb_pipedevice(ep->pipe), usb_pipeendpoint(ep->pipe));
+            utype, udir, ep->devnum, ep->epnum);
 }
 
 static void mon_text_read_head_u(struct mon_reader_text *rp,
@@ -487,18 +490,17 @@ static void mon_text_read_head_u(struct mon_reader_text *rp,
 {
         char udir, utype;
 
-        udir = usb_pipein(ep->pipe) ? 'i' : 'o';
-        switch (usb_pipetype(ep->pipe)) {
-        case PIPE_ISOCHRONOUS:  utype = 'Z'; break;
-        case PIPE_INTERRUPT:    utype = 'I'; break;
-        case PIPE_CONTROL:      utype = 'C'; break;
+        udir = (ep->is_in ? 'i' : 'o');
+        switch (ep->xfertype) {
+        case USB_ENDPOINT_XFER_ISOC:    utype = 'Z'; break;
+        case USB_ENDPOINT_XFER_INT:     utype = 'I'; break;
+        case USB_ENDPOINT_XFER_CONTROL: utype = 'C'; break;
         default: /* PIPE_BULK */  utype = 'B';
         }
         p->cnt += snprintf(p->pbuf + p->cnt, p->limit - p->cnt,
             "%lx %u %c %c%c:%d:%03u:%u",
             ep->id, ep->tstamp, ep->type,
-            utype, udir,
-            ep->busnum, usb_pipedevice(ep->pipe), usb_pipeendpoint(ep->pipe));
+            utype, udir, ep->busnum, ep->devnum, ep->epnum);
 }
 
 static void mon_text_read_statset(struct mon_reader_text *rp,
diff --git a/drivers/usb/mon/usb_mon.h b/drivers/usb/mon/usb_mon.h
index f68ad6d99ad7..f5d84ff8c101 100644
--- a/drivers/usb/mon/usb_mon.h
+++ b/drivers/usb/mon/usb_mon.h
@@ -46,7 +46,7 @@ struct mon_reader {
 
         void (*rnf_submit)(void *data, struct urb *urb);
         void (*rnf_error)(void *data, struct urb *urb, int error);
-        void (*rnf_complete)(void *data, struct urb *urb);
+        void (*rnf_complete)(void *data, struct urb *urb, int status);
 };
 
 void mon_reader_add(struct mon_bus *mbus, struct mon_reader *r);
diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
index 43d6db696f90..99fefed77919 100644
--- a/drivers/usb/serial/Kconfig
+++ b/drivers/usb/serial/Kconfig
@@ -92,6 +92,16 @@ config USB_SERIAL_BELKIN
           To compile this driver as a module, choose M here: the
           module will be called belkin_sa.
 
+config USB_SERIAL_CH341
+        tristate "USB Winchiphead CH341 Single Port Serial Driver"
+        depends on USB_SERIAL
+        help
+          Say Y here if you want to use a Winchiphead CH341 single port
+          USB to serial adapter.
+
+          To compile this driver as a module, choose M here: the
+          module will be called ch341.
+
 config USB_SERIAL_WHITEHEAT
         tristate "USB ConnectTech WhiteHEAT Serial Driver"
         depends on USB_SERIAL
diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile
index 07a976eca6b7..d6fb384e52b2 100644
--- a/drivers/usb/serial/Makefile
+++ b/drivers/usb/serial/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_USB_SERIAL_AIRCABLE)		+= aircable.o
 obj-$(CONFIG_USB_SERIAL_AIRPRIME)               += airprime.o
 obj-$(CONFIG_USB_SERIAL_ARK3116)                += ark3116.o
 obj-$(CONFIG_USB_SERIAL_BELKIN)                 += belkin_sa.o
+obj-$(CONFIG_USB_SERIAL_CH341)                  += ch341.o
 obj-$(CONFIG_USB_SERIAL_CP2101)                 += cp2101.o
 obj-$(CONFIG_USB_SERIAL_CYBERJACK)              += cyberjack.o
 obj-$(CONFIG_USB_SERIAL_CYPRESS_M8)             += cypress_m8.o
diff --git a/drivers/usb/serial/airprime.c b/drivers/usb/serial/airprime.c
index cff6fd190a28..77bb893bf2e9 100644
--- a/drivers/usb/serial/airprime.c
+++ b/drivers/usb/serial/airprime.c
@@ -18,7 +18,6 @@
 
 static struct usb_device_id id_table [] = {
         { USB_DEVICE(0x0c88, 0x17da) }, /* Kyocera Wireless KPC650/Passport */
-        { USB_DEVICE(0x413c, 0x8115) }, /* Dell Wireless HSDPA 5500 */
         { },
 };
 MODULE_DEVICE_TABLE(usb, id_table);
diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c
index c9fd486c1c7d..2a8e537cb046 100644
--- a/drivers/usb/serial/ark3116.c
+++ b/drivers/usb/serial/ark3116.c
@@ -172,11 +172,6 @@ static void ark3116_set_termios(struct usb_serial_port *port,
 
         dbg("%s - port %d", __FUNCTION__, port->number);
 
-        if (!port->tty || !port->tty->termios) {
-                dbg("%s - no tty structures", __FUNCTION__);
-                return;
-        }
-
         spin_lock_irqsave(&priv->lock, flags);
         if (!priv->termios_initialized) {
                 *(port->tty->termios) = tty_std_termios;
diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c
index e67ce25f7512..86724e885704 100644
--- a/drivers/usb/serial/belkin_sa.c
+++ b/drivers/usb/serial/belkin_sa.c
@@ -383,6 +383,10 @@ static void belkin_sa_set_termios (struct usb_serial_port *port, struct ktermios
         }
 
         baud = tty_get_baud_rate(port->tty);
+        if (baud == 0) {
+                dbg("%s - tty_get_baud_rate says 0 baud", __FUNCTION__);
+                return;
+        }
         urb_value = BELKIN_SA_BAUD(baud);
         /* Clip to maximum speed */
         if (urb_value == 0)
diff --git a/drivers/usb/serial/bus.c b/drivers/usb/serial/bus.c
index c08a38402b93..0b14aea8ebd5 100644
--- a/drivers/usb/serial/bus.c
+++ b/drivers/usb/serial/bus.c
@@ -36,6 +36,16 @@ static int usb_serial_device_match (struct device *dev, struct device_driver *dr
         return 0;
 }
 
+static ssize_t show_port_number(struct device *dev,
+                                struct device_attribute *attr, char *buf)
+{
+        struct usb_serial_port *port = to_usb_serial_port(dev);
+
+        return sprintf(buf, "%d\n", port->number - port->serial->minor);
+}
+
+static DEVICE_ATTR(port_number, S_IRUGO, show_port_number, NULL);
+
 static int usb_serial_device_probe (struct device *dev)
 {
         struct usb_serial_driver *driver;
@@ -62,6 +72,10 @@ static int usb_serial_device_probe (struct device *dev)
                         goto exit;
         }
 
+        retval = device_create_file(dev, &dev_attr_port_number);
+        if (retval)
+                goto exit;
+
         minor = port->number;
         tty_register_device (usb_serial_tty_driver, minor, dev);
         dev_info(&port->serial->dev->dev, 
@@ -84,6 +98,8 @@ static int usb_serial_device_remove (struct device *dev)
                 return -ENODEV;
         }
 
+        device_remove_file(&port->dev, &dev_attr_port_number);
+
         driver = port->serial->type;
         if (driver->port_remove) {
                 if (!try_module_get(driver->driver.owner)) {
@@ -138,7 +154,7 @@ static void free_dynids(struct usb_serial_driver *drv)
 static struct driver_attribute drv_attrs[] = {
         __ATTR_NULL,
 };
-static inline void free_dynids(struct usb_driver *drv)
+static inline void free_dynids(struct usb_serial_driver *drv)
 {
 }
 #endif
diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c
new file mode 100644
index 000000000000..6b252ceb39a8
--- /dev/null
+++ b/drivers/usb/serial/ch341.c
@@ -0,0 +1,354 @@
+/*
+ * Copyright 2007, Frank A Kingswood <frank@kingswood-consulting.co.uk>
+ *
+ * ch341.c implements a serial port driver for the Winchiphead CH341.
+ *
+ * The CH341 device can be used to implement an RS232 asynchronous
+ * serial port, an IEEE-1284 parallel printer port or a memory-like
+ * interface. In all cases the CH341 supports an I2C interface as well.
+ * This driver only supports the asynchronous serial interface.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/tty.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+#include <linux/serial.h>
+
+#define DEFAULT_BAUD_RATE 2400
+#define DEFAULT_TIMEOUT   1000
+
+static int debug;
+
+static struct usb_device_id id_table [] = {
+        { USB_DEVICE(0x4348, 0x5523) },
+        { },
+};
+MODULE_DEVICE_TABLE(usb, id_table);
+
+struct ch341_private {
+        unsigned baud_rate;
+        u8 dtr;
+        u8 rts;
+};
+
+static int ch341_control_out(struct usb_device *dev, u8 request,
+                             u16 value, u16 index)
+{
+        int r;
+        dbg("ch341_control_out(%02x,%02x,%04x,%04x)", USB_DIR_OUT|0x40,
+                (int)request, (int)value, (int)index);
+
+        r = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), request,
+                            USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
+                            value, index, NULL, 0, DEFAULT_TIMEOUT);
+
+        return r;
+}
+
+static int ch341_control_in(struct usb_device *dev,
+                            u8 request, u16 value, u16 index,
+                            char *buf, unsigned bufsize)
+{
+        int r;
+        dbg("ch341_control_in(%02x,%02x,%04x,%04x,%p,%u)", USB_DIR_IN|0x40,
+                (int)request, (int)value, (int)index, buf, (int)bufsize);
+
+        r = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), request,
+                            USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
+                            value, index, buf, bufsize, DEFAULT_TIMEOUT);
+        return r;
+}
+
+static int ch341_set_baudrate(struct usb_device *dev,
+                              struct ch341_private *priv)
+{
+        short a, b;
+        int r;
+
+        dbg("ch341_set_baudrate(%d)", priv->baud_rate);
+        switch (priv->baud_rate) {
+        case 2400:
+                a = 0xd901;
+                b = 0x0038;
+                break;
+        case 4800:
+                a = 0x6402;
+                b = 0x001f;
+                break;
+        case 9600:
+                a = 0xb202;
+                b = 0x0013;
+                break;
+        case 19200:
+                a = 0xd902;
+                b = 0x000d;
+                break;
+        case 38400:
+                a = 0x6403;
+                b = 0x000a;
+                break;
+        case 115200:
+                a = 0xcc03;
+                b = 0x0008;
+                break;
+        default:
+                return -EINVAL;
+        }
+
+        r = ch341_control_out(dev, 0x9a, 0x1312, a);
+        if (!r)
+                r = ch341_control_out(dev, 0x9a, 0x0f2c, b);
+
+        return r;
+}
+
+static int ch341_set_handshake(struct usb_device *dev,
+                               struct ch341_private *priv)
+{
+        dbg("ch341_set_handshake(%d,%d)", priv->dtr, priv->rts);
+        return ch341_control_out(dev, 0xa4,
+                ~((priv->dtr?1<<5:0)|(priv->rts?1<<6:0)), 0);
+}
+
+static int ch341_get_status(struct usb_device *dev)
+{
+        char *buffer;
+        int r;
+        const unsigned size = 8;
+
+        dbg("ch341_get_status()");
+
+        buffer = kmalloc(size, GFP_KERNEL);
+        if (!buffer)
+                return -ENOMEM;
+
+        r = ch341_control_in(dev, 0x95, 0x0706, 0, buffer, size);
+        if ( r < 0)
+                goto out;
+
+        /* Not having the datasheet for the CH341, we ignore the bytes returned
+         * from the device. Return error if the device did not respond in time.
+         */
+        r = 0;
+
+out:    kfree(buffer);
+        return r;
+}
+
+/* -------------------------------------------------------------------------- */
+
+static int ch341_configure(struct usb_device *dev, struct ch341_private *priv)
+{
+        char *buffer;
+        int r;
+        const unsigned size = 8;
+
+        dbg("ch341_configure()");
+
+        buffer = kmalloc(size, GFP_KERNEL);
+        if (!buffer)
+                return -ENOMEM;
+
+        /* expect two bytes 0x27 0x00 */
+        r = ch341_control_in(dev, 0x5f, 0, 0, buffer, size);
+        if (r < 0)
+                goto out;
+
+        r = ch341_control_out(dev, 0xa1, 0, 0);
+        if (r < 0)
+                goto out;
+
+        r = ch341_set_baudrate(dev, priv);
+        if (r < 0)
+                goto out;
+
+        /* expect two bytes 0x56 0x00 */
+        r = ch341_control_in(dev, 0x95, 0x2518, 0, buffer, size);
+        if (r < 0)
+                goto out;
+
+        r = ch341_control_out(dev, 0x9a, 0x2518, 0x0050);
+        if (r < 0)
+                goto out;
+
+        /* expect 0xff 0xee */
+        r = ch341_get_status(dev);
+        if (r < 0)
+                goto out;
+
+        r = ch341_control_out(dev, 0xa1, 0x501f, 0xd90a);
+        if (r < 0)
+                goto out;
+
+        r = ch341_set_baudrate(dev, priv);
+        if (r < 0)
+                goto out;
+
+        r = ch341_set_handshake(dev, priv);
+        if (r < 0)
+                goto out;
+
+        /* expect 0x9f 0xee */
+        r = ch341_get_status(dev);
+
+out:    kfree(buffer);
+        return r;
+}
+
+/* allocate private data */
+static int ch341_attach(struct usb_serial *serial)
+{
+        struct ch341_private *priv;
+        int r;
+
+        dbg("ch341_attach()");
+
+        /* private data */
+        priv = kzalloc(sizeof(struct ch341_private), GFP_KERNEL);
+        if (!priv)
+                return -ENOMEM;
+
+        priv->baud_rate = DEFAULT_BAUD_RATE;
+        priv->dtr = 1;
+        priv->rts = 1;
+
+        r = ch341_configure(serial->dev, priv);
+        if (r < 0)
+                goto error;
+
+        usb_set_serial_port_data(serial->port[0], priv);
+        return 0;
+
+error:  kfree(priv);
+        return r;
+}
+
+/* open this device, set default parameters */
+static int ch341_open(struct usb_serial_port *port, struct file *filp)
+{
+        struct usb_serial *serial = port->serial;
+        struct ch341_private *priv = usb_get_serial_port_data(serial->port[0]);
+        int r;
+
+        dbg("ch341_open()");
+
+        priv->baud_rate = DEFAULT_BAUD_RATE;
+        priv->dtr = 1;
+        priv->rts = 1;
+
+        r = ch341_configure(serial->dev, priv);
+        if (r)
+                goto out;
+
+        r = ch341_set_handshake(serial->dev, priv);
+        if (r)
+                goto out;
+
+        r = ch341_set_baudrate(serial->dev, priv);
+        if (r)
+                goto out;
+
+        r = usb_serial_generic_open(port, filp);
+
+out:    return r;
+}
+
+/* Old_termios contains the original termios settings and
+ * tty->termios contains the new setting to be used.
+ */
+static void ch341_set_termios(struct usb_serial_port *port,
+                              struct ktermios *old_termios)
+{
+        struct ch341_private *priv = usb_get_serial_port_data(port);
+        struct tty_struct *tty = port->tty;
+        unsigned baud_rate;
+
+        dbg("ch341_set_termios()");
+
+        if (!tty || !tty->termios)
+                return;
+
+        baud_rate = tty_get_baud_rate(tty);
+
+        switch (baud_rate) {
+        case 2400:
+        case 4800:
+        case 9600:
+        case 19200:
+        case 38400:
+        case 115200:
+                priv->baud_rate = baud_rate;
+                break;
+        default:
+                dbg("Rate %d not supported, using %d",
+                        baud_rate, DEFAULT_BAUD_RATE);
+                priv->baud_rate = DEFAULT_BAUD_RATE;
+        }
+
+        ch341_set_baudrate(port->serial->dev, priv);
+
+        /* Unimplemented:
+         * (cflag & CSIZE) : data bits [5, 8]
+         * (cflag & PARENB) : parity {NONE, EVEN, ODD}
+         * (cflag & CSTOPB) : stop bits [1, 2]
+         */
+}
+
+static struct usb_driver ch341_driver = {
+        .name           = "ch341",
+        .probe          = usb_serial_probe,
+        .disconnect     = usb_serial_disconnect,
+        .id_table       = id_table,
+        .no_dynamic_id  = 1,
+};
+
+static struct usb_serial_driver ch341_device = {
+        .driver = {
+                .owner  = THIS_MODULE,
+                .name   = "ch341-uart",
+        },
+        .id_table         = id_table,
+        .usb_driver       = &ch341_driver,
+        .num_interrupt_in = NUM_DONT_CARE,
+        .num_bulk_in      = 1,
+        .num_bulk_out     = 1,
+        .num_ports        = 1,
+        .open             = ch341_open,
+        .set_termios      = ch341_set_termios,
+        .attach           = ch341_attach,
+};
+
+static int __init ch341_init(void)
+{
+        int retval;
+
+        retval = usb_serial_register(&ch341_device);
+        if (retval)
+                return retval;
+        retval = usb_register(&ch341_driver);
+        if (retval)
+                usb_serial_deregister(&ch341_device);
+        return retval;
+}
+
+static void __exit ch341_exit(void)
+{
+        usb_deregister(&ch341_driver);
+        usb_serial_deregister(&ch341_device);
+}
+
+module_init(ch341_init);
+module_exit(ch341_exit);
+MODULE_LICENSE("GPL");
+
+module_param(debug, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Debug enabled or not");
+
+/* EOF ch341.c */
diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c
index 33f6ee50b8d3..eb7df1835c11 100644
--- a/drivers/usb/serial/cp2101.c
+++ b/drivers/usb/serial/cp2101.c
@@ -53,6 +53,7 @@ static void cp2101_shutdown(struct usb_serial*);
 static int debug;
 
 static struct usb_device_id id_table [] = {
+        { USB_DEVICE(0x08e6, 0x5501) }, /* Gemalto Prox-PU/CU contactless smartcard reader */
         { USB_DEVICE(0x0FCF, 0x1003) }, /* Dynastream ANT development board */
         { USB_DEVICE(0x10A6, 0xAA26) }, /* Knock-off DCU-11 cable */
         { USB_DEVICE(0x10AB, 0x10C5) }, /* Siemens MC60 Cable */
@@ -521,7 +522,7 @@ static void cp2101_set_termios (struct usb_serial_port *port,
 
         dbg("%s - port %d", __FUNCTION__, port->number);
 
-        if ((!port->tty) || (!port->tty->termios)) {
+        if (!port->tty || !port->tty->termios) {
                 dbg("%s - no tty structures", __FUNCTION__);
                 return;
         }
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 7b1673a44077..e4c248c98e84 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -538,6 +538,8 @@ static struct usb_device_id id_table_combined [] = {
         { USB_DEVICE(FTDI_VID, FTDI_TERATRONIK_VCP_PID) },
         { USB_DEVICE(FTDI_VID, FTDI_TERATRONIK_D2XX_PID) },
         { USB_DEVICE(EVOLUTION_VID, EVOLUTION_ER1_PID) },
+        { USB_DEVICE(EVOLUTION_VID, EVO_HYBRID_PID) },
+        { USB_DEVICE(EVOLUTION_VID, EVO_RCM4_PID) },
         { USB_DEVICE(FTDI_VID, FTDI_ARTEMIS_PID) },
         { USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16_PID) },
         { USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16C_PID) },
@@ -566,6 +568,7 @@ static struct usb_device_id id_table_combined [] = {
         { USB_DEVICE(ELEKTOR_VID, ELEKTOR_FT323R_PID) },
         { USB_DEVICE(TELLDUS_VID, TELLDUS_TELLSTICK_PID) },
         { USB_DEVICE(FTDI_VID, FTDI_MAXSTREAM_PID) },
+        { USB_DEVICE(TML_VID, TML_USB_SERIAL_PID) },
         { USB_DEVICE(OLIMEX_VID, OLIMEX_ARM_USB_OCD_PID),
                 .driver_info = (kernel_ulong_t)&ftdi_olimex_quirk },
         { },                                    /* Optional parameter entry */
@@ -1166,7 +1169,9 @@ static void remove_sysfs_attrs(struct usb_serial_port *port)
         /* XXX see create_sysfs_attrs */
         if (priv->chip_type != SIO) {
                 device_remove_file(&port->dev, &dev_attr_event_char);
-                if (priv->chip_type == FT232BM || priv->chip_type == FT2232C) {
+                if (priv->chip_type == FT232BM ||
+                    priv->chip_type == FT2232C ||
+                    priv->chip_type == FT232RL) {
                         device_remove_file(&port->dev, &dev_attr_latency_timer);
                 }
         }
@@ -2099,6 +2104,7 @@ static int ftdi_tiocmget (struct usb_serial_port *port, struct file *file)
         case FT8U232AM:
         case FT232BM:
         case FT2232C:
+        case FT232RL:
                 /* the 8U232AM returns a two byte value (the sio is a 1 byte value) - in the same
                    format as the data returned from the in point */
                 if ((ret = usb_control_msg(port->serial->dev,
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index d9e49716db13..b57b90ae9f9d 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -430,6 +430,9 @@
  */
 #define EVOLUTION_VID           0xDEEE  /* Vendor ID */
 #define EVOLUTION_ER1_PID       0x0300  /* ER1 Control Module */
+#define EVO_8U232AM_PID 0x02FF  /* Evolution robotics RCM2 (FT232AM)*/
+#define EVO_HYBRID_PID          0x0302  /* Evolution robotics RCM4 PID (FT232BM)*/
+#define EVO_RCM4_PID            0x0303  /* Evolution robotics RCM4 PID */
 
 /* Pyramid Computer GmbH */
 #define FTDI_PYRAMID_PID        0xE6C8  /* Pyramid Appliance Display */
@@ -531,6 +534,14 @@
 #define OLIMEX_VID                      0x15BA
 #define OLIMEX_ARM_USB_OCD_PID          0x0003
 
+
+/*
+ * The Mobility Lab (TML)
+ * Submitted by Pierre Castella
+ */
+#define TML_VID                 0x1B91  /* Vendor ID */
+#define TML_USB_SERIAL_PID      0x0064  /* USB - Serial Converter */
+
 /* Commands */
 #define FTDI_SIO_RESET          0 /* Reset the port */
 #define FTDI_SIO_MODEM_CTRL     1 /* Set the modem control register */
diff --git a/drivers/usb/serial/funsoft.c b/drivers/usb/serial/funsoft.c
index 4092f6dc9efd..b5194dc7d3bb 100644
--- a/drivers/usb/serial/funsoft.c
+++ b/drivers/usb/serial/funsoft.c
@@ -24,26 +24,6 @@ static struct usb_device_id id_table [] = {
 };
 MODULE_DEVICE_TABLE(usb, id_table);
 
-static int funsoft_ioctl(struct usb_serial_port *port, struct file *file,
-                         unsigned int cmd, unsigned long arg)
-{
-        struct ktermios t;
-
-        dbg("%s - port %d, cmd 0x%04x", __FUNCTION__, port->number, cmd);
-
-        if (cmd == TCSETSF) {
-                if (user_termios_to_kernel_termios(&t, (struct termios __user *)arg))
-                        return -EFAULT;
-
-                dbg("%s - iflag:%x oflag:%x cflag:%x lflag:%x", __FUNCTION__,
-                    t.c_iflag, t.c_oflag, t.c_cflag, t.c_lflag);
-
-                if (!(t.c_lflag & ICANON))
-                        return -EINVAL;
-        }
-        return -ENOIOCTLCMD;
-}
-
 static struct usb_driver funsoft_driver = {
         .name =         "funsoft",
         .probe =        usb_serial_probe,
@@ -63,7 +43,6 @@ static struct usb_serial_driver funsoft_device = {
         .num_bulk_in =          NUM_DONT_CARE,
         .num_bulk_out =         NUM_DONT_CARE,
         .num_ports =            1,
-        .ioctl =                funsoft_ioctl,
 };
 
 static int __init funsoft_init(void)
diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c
index 04bd3b7a2985..f1c90cfe7251 100644
--- a/drivers/usb/serial/garmin_gps.c
+++ b/drivers/usb/serial/garmin_gps.c
@@ -1,7 +1,7 @@
 /*
  * Garmin GPS driver
  *
- * Copyright (C) 2006 Hermann Kneissel herkne@users.sourceforge.net
+ * Copyright (C) 2006,2007 Hermann Kneissel herkne@users.sourceforge.net
  *
  * The latest version of the driver can be found at
  * http://sourceforge.net/projects/garmin-gps/
@@ -34,6 +34,7 @@
 #include <linux/module.h>
 #include <linux/spinlock.h>
 #include <asm/uaccess.h>
+#include <asm/atomic.h>
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
 
@@ -52,7 +53,7 @@ static int debug = 0;
  */
 
 #define VERSION_MAJOR   0
-#define VERSION_MINOR   28
+#define VERSION_MINOR   31
 
 #define _STR(s) #s
 #define _DRIVER_VERSION(a,b) "v" _STR(a) "." _STR(b)
@@ -141,6 +142,8 @@ struct garmin_data {
         __u8   inbuffer [GPS_IN_BUFSIZ];  /* tty -> usb */
         __u8   outbuffer[GPS_OUT_BUFSIZ]; /* usb -> tty */
         __u8   privpkt[4*6];
+        atomic_t req_count;
+        atomic_t resp_count;
         spinlock_t lock;
         struct list_head pktlist;
 };
@@ -171,8 +174,6 @@ struct garmin_data {
 #define CLEAR_HALT_REQUIRED       0x0001
 
 #define FLAGS_QUEUING             0x0100
-#define FLAGS_APP_RESP_SEEN       0x0200
-#define FLAGS_APP_REQ_SEEN        0x0400
 #define FLAGS_DROP_DATA           0x0800
 
 #define FLAGS_GSP_SKIP            0x1000
@@ -186,7 +187,8 @@ struct garmin_data {
 /* function prototypes */
 static void gsp_next_packet(struct garmin_data * garmin_data_p);
 static int  garmin_write_bulk(struct usb_serial_port *port,
-                             const unsigned char *buf, int count);
+                             const unsigned char *buf, int count,
+                             int dismiss_ack);
 
 /* some special packets to be send or received */
 static unsigned char const GARMIN_START_SESSION_REQ[]
@@ -233,9 +235,7 @@ static struct usb_driver garmin_driver = {
 
 static inline int noResponseFromAppLayer(struct garmin_data * garmin_data_p)
 {
-        return ((garmin_data_p->flags
-                                & (FLAGS_APP_REQ_SEEN|FLAGS_APP_RESP_SEEN))
-                == FLAGS_APP_REQ_SEEN);
+        return atomic_read(&garmin_data_p->req_count) == atomic_read(&garmin_data_p->resp_count);
 }
 
 
@@ -463,7 +463,7 @@ static int gsp_rec_packet(struct garmin_data * garmin_data_p, int count)
         usbdata[2] = __cpu_to_le32(size);
 
         garmin_write_bulk (garmin_data_p->port, garmin_data_p->inbuffer,
-                           GARMIN_PKTHDR_LENGTH+size);
+                           GARMIN_PKTHDR_LENGTH+size, 0);
 
         /* if this was an abort-transfer command, flush all
            queued data. */
@@ -818,7 +818,7 @@ static int nat_receive(struct garmin_data * garmin_data_p,
                         if (garmin_data_p->insize >= len) {
                                 garmin_write_bulk (garmin_data_p->port,
                                                    garmin_data_p->inbuffer,
-                                                   len);
+                                                   len, 0);
                                 garmin_data_p->insize = 0;
 
                                 /* if this was an abort-transfer command,
@@ -893,10 +893,11 @@ static int garmin_clear(struct garmin_data * garmin_data_p)
 
         struct usb_serial_port *port = garmin_data_p->port;
 
-        if (port != NULL && garmin_data_p->flags & FLAGS_APP_RESP_SEEN) {
+        if (port != NULL && atomic_read(&garmin_data_p->resp_count)) {
                 /* send a terminate command */
                 status = garmin_write_bulk(port, GARMIN_STOP_TRANSFER_REQ,
-                                           sizeof(GARMIN_STOP_TRANSFER_REQ));
+                                           sizeof(GARMIN_STOP_TRANSFER_REQ),
+                                           1);
         }
 
         /* flush all queued data */
@@ -939,7 +940,8 @@ static int garmin_init_session(struct usb_serial_port *port)
                 dbg("%s - starting session ...", __FUNCTION__);
                 garmin_data_p->state = STATE_ACTIVE;
                 status = garmin_write_bulk(port, GARMIN_START_SESSION_REQ,
-                                           sizeof(GARMIN_START_SESSION_REQ));
+                                           sizeof(GARMIN_START_SESSION_REQ),
+                                           0);
 
                 if (status >= 0) {
 
@@ -950,7 +952,8 @@ static int garmin_init_session(struct usb_serial_port *port)
                         /* not needed, but the win32 driver does it too ... */
                         status = garmin_write_bulk(port,
                                                    GARMIN_START_SESSION_REQ2,
-                                                   sizeof(GARMIN_START_SESSION_REQ2));
+                                                   sizeof(GARMIN_START_SESSION_REQ2),
+                                                   0);
                         if (status >= 0) {
                                 status = 0;
                                 spin_lock_irqsave(&garmin_data_p->lock, flags);
@@ -987,6 +990,8 @@ static int garmin_open (struct usb_serial_port *port, struct file *filp)
         garmin_data_p->mode  = initial_mode;
         garmin_data_p->count = 0;
         garmin_data_p->flags = 0;
+        atomic_set(&garmin_data_p->req_count, 0);
+        atomic_set(&garmin_data_p->resp_count, 0);
         spin_unlock_irqrestore(&garmin_data_p->lock, flags);
 
         /* shutdown any bulk reads that might be going on */
@@ -1035,28 +1040,39 @@ static void garmin_write_bulk_callback (struct urb *urb)
 {
         unsigned long flags;
         struct usb_serial_port *port = (struct usb_serial_port *)urb->context;
-        struct garmin_data * garmin_data_p = usb_get_serial_port_data(port);
         int status = urb->status;
 
-        /* free up the transfer buffer, as usb_free_urb() does not do this */
-        kfree (urb->transfer_buffer);
+        if (port) {
+                struct garmin_data * garmin_data_p = usb_get_serial_port_data(port);
 
-        dbg("%s - port %d", __FUNCTION__, port->number);
+                dbg("%s - port %d", __FUNCTION__, port->number);
 
-        if (status) {
-                dbg("%s - nonzero write bulk status received: %d",
-                        __FUNCTION__, status);
-                spin_lock_irqsave(&garmin_data_p->lock, flags);
-                garmin_data_p->flags |= CLEAR_HALT_REQUIRED;
-                spin_unlock_irqrestore(&garmin_data_p->lock, flags);
+                if (GARMIN_LAYERID_APPL == getLayerId(urb->transfer_buffer)
+                    && (garmin_data_p->mode == MODE_GARMIN_SERIAL))  {
+                        gsp_send_ack(garmin_data_p, ((__u8 *)urb->transfer_buffer)[4]);
+                }
+
+                if (status) {
+                        dbg("%s - nonzero write bulk status received: %d",
+                            __FUNCTION__, urb->status);
+                        spin_lock_irqsave(&garmin_data_p->lock, flags);
+                        garmin_data_p->flags |= CLEAR_HALT_REQUIRED;
+                        spin_unlock_irqrestore(&garmin_data_p->lock, flags);
+                }
+
+                usb_serial_port_softint(port);
         }
 
-        usb_serial_port_softint(port);
+        /* Ignore errors that resulted from garmin_write_bulk with dismiss_ack=1 */
+
+        /* free up the transfer buffer, as usb_free_urb() does not do this */
+        kfree (urb->transfer_buffer);
 }
 
 
 static int garmin_write_bulk (struct usb_serial_port *port,
-                              const unsigned char *buf, int count)
+                              const unsigned char *buf, int count,
+                              int dismiss_ack)
 {
         unsigned long flags;
         struct usb_serial *serial = port->serial;
@@ -1093,13 +1109,12 @@ static int garmin_write_bulk (struct usb_serial_port *port,
                                 usb_sndbulkpipe (serial->dev,
                                 port->bulk_out_endpointAddress),
                                 buffer, count,
-                                garmin_write_bulk_callback, port);
+                                garmin_write_bulk_callback,
+                                dismiss_ack ? NULL : port);
         urb->transfer_flags |= URB_ZERO_PACKET;
 
         if (GARMIN_LAYERID_APPL == getLayerId(buffer)) {
-                spin_lock_irqsave(&garmin_data_p->lock, flags);
-                garmin_data_p->flags |= FLAGS_APP_REQ_SEEN;
-                spin_unlock_irqrestore(&garmin_data_p->lock, flags);
+                atomic_inc(&garmin_data_p->req_count);
                 if (garmin_data_p->mode == MODE_GARMIN_SERIAL)  {
                         pkt_clear(garmin_data_p);
                         garmin_data_p->state = STATE_GSP_WAIT_DATA;
@@ -1114,13 +1129,6 @@ static int garmin_write_bulk (struct usb_serial_port *port,
                         "failed with status = %d\n",
                                 __FUNCTION__, status);
                 count = status;
-        } else {
-
-                if (GARMIN_LAYERID_APPL == getLayerId(buffer)
-                    && (garmin_data_p->mode == MODE_GARMIN_SERIAL))  {
-
-                        gsp_send_ack(garmin_data_p, buffer[4]);
-                }
         }
 
         /* we are done with this urb, so let the host driver
@@ -1135,7 +1143,6 @@ static int garmin_write_bulk (struct usb_serial_port *port,
 static int garmin_write (struct usb_serial_port *port,
                          const unsigned char *buf, int count)
 {
-        unsigned long flags;
         int pktid, pktsiz, len;
         struct garmin_data * garmin_data_p = usb_get_serial_port_data(port);
         __le32 *privpkt = (__le32 *)garmin_data_p->privpkt;
@@ -1186,9 +1193,7 @@ static int garmin_write (struct usb_serial_port *port,
                                 break;
 
                         case PRIV_PKTID_RESET_REQ:
-                                spin_lock_irqsave(&garmin_data_p->lock, flags);
-                                garmin_data_p->flags |= FLAGS_APP_REQ_SEEN;
-                                spin_unlock_irqrestore(&garmin_data_p->lock, flags);
+                                atomic_inc(&garmin_data_p->req_count);
                                 break;
 
                         case PRIV_PKTID_SET_DEF_MODE:
@@ -1241,8 +1246,6 @@ static int garmin_chars_in_buffer (struct usb_serial_port *port)
 static void garmin_read_process(struct garmin_data * garmin_data_p,
                                  unsigned char *data, unsigned data_length)
 {
-        unsigned long flags;
-
         if (garmin_data_p->flags & FLAGS_DROP_DATA) {
                 /* abort-transfer cmd is actice */
                 dbg("%s - pkt dropped", __FUNCTION__);
@@ -1254,9 +1257,7 @@ static void garmin_read_process(struct garmin_data * garmin_data_p,
                    the device */
                 if (0 == memcmp(data, GARMIN_APP_LAYER_REPLY,
                                 sizeof(GARMIN_APP_LAYER_REPLY))) {
-                        spin_lock_irqsave(&garmin_data_p->lock, flags);
-                        garmin_data_p->flags |= FLAGS_APP_RESP_SEEN;
-                        spin_unlock_irqrestore(&garmin_data_p->lock, flags);
+                        atomic_inc(&garmin_data_p->resp_count);
                 }
 
                 /* if throttling is active or postprecessing is required
diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c
index 0455c1552ae9..e836ad07fdb9 100644
--- a/drivers/usb/serial/ipaq.c
+++ b/drivers/usb/serial/ipaq.c
@@ -256,6 +256,7 @@ static struct usb_device_id ipaq_id_table [] = {
         { USB_DEVICE(0x04DD, 0x9121) }, /* SHARP WS004SH USB Modem */
         { USB_DEVICE(0x04DD, 0x9123) }, /* SHARP WS007SH USB Modem */
         { USB_DEVICE(0x04DD, 0x9151) }, /* SHARP S01SH USB Modem */
+        { USB_DEVICE(0x04DD, 0x91AC) }, /* SHARP WS011SH USB Modem */
         { USB_DEVICE(0x04E8, 0x5F00) }, /* Samsung NEXiO USB Sync */
         { USB_DEVICE(0x04E8, 0x5F01) }, /* Samsung NEXiO USB Sync */
         { USB_DEVICE(0x04E8, 0x5F02) }, /* Samsung NEXiO USB Sync */
@@ -545,6 +546,7 @@ static struct usb_device_id ipaq_id_table [] = {
         { USB_DEVICE(0x413C, 0x4009) }, /* Dell Axim USB Sync */
         { USB_DEVICE(0x4505, 0x0010) }, /* Smartphone */
         { USB_DEVICE(0x5E04, 0xCE00) }, /* SAGEM Wireless Assistant */
+        { USB_DEVICE(0x0BB4, 0x00CF) }, /* HTC smartphone modems */
         { }                             /* Terminating entry */
 };
 
@@ -645,11 +647,13 @@ static int ipaq_open(struct usb_serial_port *port, struct file *filp)
         kfree(port->bulk_out_buffer);
         port->bulk_in_buffer = kmalloc(URBDATA_SIZE, GFP_KERNEL);
         if (port->bulk_in_buffer == NULL) {
+                port->bulk_out_buffer = NULL; /* prevent double free */
                 goto enomem;
         }
         port->bulk_out_buffer = kmalloc(URBDATA_SIZE, GFP_KERNEL);
         if (port->bulk_out_buffer == NULL) {
                 kfree(port->bulk_in_buffer);
+                port->bulk_in_buffer = NULL;
                 goto enomem;
         }
         port->read_urb->transfer_buffer = port->bulk_in_buffer;
diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c
index 5a4127e62c4a..90e3216abd1f 100644
--- a/drivers/usb/serial/kl5kusb105.c
+++ b/drivers/usb/serial/kl5kusb105.c
@@ -728,24 +728,32 @@ static void klsi_105_set_termios (struct usb_serial_port *port,
 #endif
                 }
                 
-                switch(cflag & CBAUD) {
-                case B0: /* handled below */
+                switch(tty_get_baud_rate(port->tty)) {
+                case 0: /* handled below */
                         break;
-                case B1200: priv->cfg.baudrate = kl5kusb105a_sio_b1200;
+                case 1200:
+                        priv->cfg.baudrate = kl5kusb105a_sio_b1200;
                         break;
-                case B2400: priv->cfg.baudrate = kl5kusb105a_sio_b2400;
+                case 2400:
+                        priv->cfg.baudrate = kl5kusb105a_sio_b2400;
                         break;
-                case B4800: priv->cfg.baudrate = kl5kusb105a_sio_b4800;
+                case 4800:
+                        priv->cfg.baudrate = kl5kusb105a_sio_b4800;
                         break;
-                case B9600: priv->cfg.baudrate = kl5kusb105a_sio_b9600;
+                case 9600:
+                        priv->cfg.baudrate = kl5kusb105a_sio_b9600;
                         break;
-                case B19200: priv->cfg.baudrate = kl5kusb105a_sio_b19200;
+                case 19200:
+                        priv->cfg.baudrate = kl5kusb105a_sio_b19200;
                         break;
-                case B38400: priv->cfg.baudrate = kl5kusb105a_sio_b38400;
+                case 38400:
+                        priv->cfg.baudrate = kl5kusb105a_sio_b38400;
                         break;
-                case B57600: priv->cfg.baudrate = kl5kusb105a_sio_b57600;
+                case 57600:
+                        priv->cfg.baudrate = kl5kusb105a_sio_b57600;
                         break;
-                case B115200: priv->cfg.baudrate = kl5kusb105a_sio_b115200;
+                case 115200:
+                        priv->cfg.baudrate = kl5kusb105a_sio_b115200;
                         break;
                 default:
                         err("KLSI USB->Serial converter:"
diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c
index 02a86dbc0e97..6f224195bd25 100644
--- a/drivers/usb/serial/kobil_sct.c
+++ b/drivers/usb/serial/kobil_sct.c
@@ -82,6 +82,7 @@ static int  kobil_tiocmset(struct usb_serial_port *port, struct file *file,
                            unsigned int set, unsigned int clear);
 static void kobil_read_int_callback( struct urb *urb );
 static void kobil_write_callback( struct urb *purb );
+static void kobil_set_termios(struct usb_serial_port *port, struct ktermios *old);
 
 
 static struct usb_device_id id_table [] = {
@@ -119,6 +120,7 @@ static struct usb_serial_driver kobil_device = {
         .attach =               kobil_startup,
         .shutdown =             kobil_shutdown,
         .ioctl =                kobil_ioctl,
+        .set_termios =          kobil_set_termios,
         .tiocmget =             kobil_tiocmget,
         .tiocmset =             kobil_tiocmset,
         .open =                 kobil_open,
@@ -137,7 +139,6 @@ struct kobil_private {
         int cur_pos; // index of the next char to send in buf
         __u16 device_type;
         int line_state;
-        struct ktermios internal_termios;
 };
 
 
@@ -216,7 +217,7 @@ static void kobil_shutdown (struct usb_serial *serial)
 
 static int kobil_open (struct usb_serial_port *port, struct file *filp)
 {
-        int i, result = 0;
+        int result = 0;
         struct kobil_private *priv;
         unsigned char *transfer_buffer;
         int transfer_buffer_length = 8;
@@ -242,16 +243,6 @@ static int kobil_open (struct usb_serial_port *port, struct file *filp)
         port->tty->termios->c_iflag = IGNBRK | IGNPAR | IXOFF;
         port->tty->termios->c_oflag &= ~ONLCR; // do NOT translate CR to CR-NL (0x0A -> 0x0A 0x0D)
         
-        // set up internal termios structure 
-        priv->internal_termios.c_iflag = port->tty->termios->c_iflag;
-        priv->internal_termios.c_oflag = port->tty->termios->c_oflag;
-        priv->internal_termios.c_cflag = port->tty->termios->c_cflag;
-        priv->internal_termios.c_lflag = port->tty->termios->c_lflag;
-
-        for (i=0; i<NCCS; i++) {
-                priv->internal_termios.c_cc[i] = port->tty->termios->c_cc[i];
-        }
-        
         // allocate memory for transfer buffer
         transfer_buffer = kzalloc(transfer_buffer_length, GFP_KERNEL);
         if (! transfer_buffer) {
@@ -607,102 +598,79 @@ static int  kobil_tiocmset(struct usb_serial_port *port, struct file *file,
         return (result < 0) ? result : 0;
 }
 
-
-static int  kobil_ioctl(struct usb_serial_port *port, struct file *file,
-                        unsigned int cmd, unsigned long arg)
+static void kobil_set_termios(struct usb_serial_port *port, struct ktermios *old)
 {
         struct kobil_private * priv;
         int result;
         unsigned short urb_val = 0;
-        unsigned char *transfer_buffer;
-        int transfer_buffer_length = 8;
-        char *settings;
-        void __user *user_arg = (void __user *)arg;
+        int c_cflag = port->tty->termios->c_cflag;
+        speed_t speed;
+        void * settings;
 
         priv = usb_get_serial_port_data(port);
-        if ((priv->device_type == KOBIL_USBTWIN_PRODUCT_ID) || (priv->device_type == KOBIL_KAAN_SIM_PRODUCT_ID)) {
+        if (priv->device_type == KOBIL_USBTWIN_PRODUCT_ID || priv->device_type == KOBIL_KAAN_SIM_PRODUCT_ID)
                 // This device doesn't support ioctl calls
-                return 0;
-        }
-
-        switch (cmd) {
-        case TCGETS:   // 0x5401
-                if (!access_ok(VERIFY_WRITE, user_arg, sizeof(struct ktermios))) {
-                        dbg("%s - port %d Error in access_ok", __FUNCTION__, port->number);
-                        return -EFAULT;
-                }
-                if (kernel_termios_to_user_termios((struct ktermios __user *)arg,
-                                                   &priv->internal_termios))
-                        return -EFAULT;
-                return 0;
-
-        case TCSETS:   // 0x5402
-                if (!(port->tty->termios)) {
-                        dbg("%s - port %d Error: port->tty->termios is NULL", __FUNCTION__, port->number);
-                        return -ENOTTY;
-                }
-                if (!access_ok(VERIFY_READ, user_arg, sizeof(struct ktermios))) {
-                        dbg("%s - port %d Error in access_ok", __FUNCTION__, port->number);
-                        return -EFAULT;
-                }
-                if (user_termios_to_kernel_termios(&priv->internal_termios,
-                                                   (struct ktermios __user *)arg))
-                        return -EFAULT;
-                
-                settings = kzalloc(50, GFP_KERNEL);
-                if (! settings) {
-                        return -ENOBUFS;
-                }
+                return;
 
-                switch (priv->internal_termios.c_cflag & CBAUD) {
-                case B1200:
+        switch (speed = tty_get_baud_rate(port->tty)) {
+                case 1200:
                         urb_val = SUSBCR_SBR_1200;
-                        strcat(settings, "1200 ");
                         break;
-                case B9600:
+                case 9600:
                 default:
                         urb_val = SUSBCR_SBR_9600;
-                        strcat(settings, "9600 ");
                         break;
-                }
+        }
+        urb_val |= (c_cflag & CSTOPB) ? SUSBCR_SPASB_2StopBits : SUSBCR_SPASB_1StopBit;
+
+        settings = kzalloc(50, GFP_KERNEL);
+        if (! settings)
+                return;
 
-                urb_val |= (priv->internal_termios.c_cflag & CSTOPB) ? SUSBCR_SPASB_2StopBits : SUSBCR_SPASB_1StopBit;
-                strcat(settings, (priv->internal_termios.c_cflag & CSTOPB) ? "2 StopBits " : "1 StopBit ");
+        sprintf(settings, "%d ", speed);
 
-                if (priv->internal_termios.c_cflag & PARENB) {
-                        if  (priv->internal_termios.c_cflag & PARODD) {
-                                urb_val |= SUSBCR_SPASB_OddParity;
-                                strcat(settings, "Odd Parity");
-                        } else {
-                                urb_val |= SUSBCR_SPASB_EvenParity;
-                                strcat(settings, "Even Parity");
-                        }
+        if (c_cflag & PARENB) {
+                if  (c_cflag & PARODD) {
+                        urb_val |= SUSBCR_SPASB_OddParity;
+                        strcat(settings, "Odd Parity");
                 } else {
-                        urb_val |= SUSBCR_SPASB_NoParity;
-                        strcat(settings, "No Parity");
+                        urb_val |= SUSBCR_SPASB_EvenParity;
+                        strcat(settings, "Even Parity");
                 }
-                dbg("%s - port %d setting port to: %s", __FUNCTION__, port->number, settings );
+        } else {
+                urb_val |= SUSBCR_SPASB_NoParity;
+                strcat(settings, "No Parity");
+        }
 
-                result = usb_control_msg( port->serial->dev, 
-                                          usb_rcvctrlpipe(port->serial->dev, 0 ), 
-                                          SUSBCRequest_SetBaudRateParityAndStopBits,
-                                          USB_TYPE_VENDOR | USB_RECIP_ENDPOINT | USB_DIR_OUT,
-                                          urb_val,
-                                          0,
-                                          settings,
-                                          0,
-                                          KOBIL_TIMEOUT
-                        );
+        result = usb_control_msg( port->serial->dev,
+                                  usb_rcvctrlpipe(port->serial->dev, 0 ),
+                                  SUSBCRequest_SetBaudRateParityAndStopBits,
+                                  USB_TYPE_VENDOR | USB_RECIP_ENDPOINT | USB_DIR_OUT,
+                                  urb_val,
+                                  0,
+                                  settings,
+                                  0,
+                                  KOBIL_TIMEOUT
+                );
+        kfree(settings);
+}
 
-                dbg("%s - port %d Send set_baudrate URB returns: %i", __FUNCTION__, port->number, result);
-                kfree(settings);
+static int kobil_ioctl(struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg)
+{
+        struct kobil_private * priv = usb_get_serial_port_data(port);
+        unsigned char *transfer_buffer;
+        int transfer_buffer_length = 8;
+        int result;
+
+        if (priv->device_type == KOBIL_USBTWIN_PRODUCT_ID || priv->device_type == KOBIL_KAAN_SIM_PRODUCT_ID)
+                // This device doesn't support ioctl calls
                 return 0;
 
+        switch (cmd) {
         case TCFLSH:   // 0x540B
                 transfer_buffer = kmalloc(transfer_buffer_length, GFP_KERNEL);
-                if (! transfer_buffer) {
+                if (! transfer_buffer)
                         return -ENOBUFS;
-                }
 
                 result = usb_control_msg( port->serial->dev, 
                                           usb_rcvctrlpipe(port->serial->dev, 0 ), 
@@ -716,15 +684,13 @@ static int  kobil_ioctl(struct usb_serial_port *port, struct file *file,
                         );
                 
                 dbg("%s - port %d Send reset_all_queues (FLUSH) URB returns: %i", __FUNCTION__, port->number, result);
-
                 kfree(transfer_buffer);
-                return ((result < 0) ? -EFAULT : 0);
-
+                return (result < 0) ? -EFAULT : 0;
+        default:
+                return -ENOIOCTLCMD;
         }
-        return -ENOIOCTLCMD;
 }
 
-
 static int __init kobil_init (void)
 {
         int retval;
diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c
index e08c9bb403d8..0dc99f75bb09 100644
--- a/drivers/usb/serial/mct_u232.c
+++ b/drivers/usb/serial/mct_u232.c
@@ -206,20 +206,20 @@ static int mct_u232_calculate_baud_rate(struct usb_serial *serial, speed_t value
                 }
         } else {
                 switch (value) {
-                        case 300: break;
-                        case 600: break;
-                        case 1200: break;
-                        case 2400: break;
-                        case 4800: break;
-                        case 9600: break;
-                        case 19200: break;
-                        case 38400: break;
-                        case 57600: break;
-                        case 115200: break;
-                        default:
-                                err("MCT USB-RS232: unsupported baudrate request 0x%x,"
-                                    " using default of B9600", value);
-                                value = 9600;
+                case 300: break;
+                case 600: break;
+                case 1200: break;
+                case 2400: break;
+                case 4800: break;
+                case 9600: break;
+                case 19200: break;
+                case 38400: break;
+                case 57600: break;
+                case 115200: break;
+                default:
+                        err("MCT USB-RS232: unsupported baudrate request 0x%x,"
+                            " using default of B9600", value);
+                        value = 9600;
                 }
                 return 115200/value;
         }
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 84c12b5f1271..a18659e0700c 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -108,8 +108,10 @@ static int  option_send_setup(struct usb_serial_port *port);
 #define HUAWEI_VENDOR_ID                        0x12D1
 #define HUAWEI_PRODUCT_E600                     0x1001
 #define HUAWEI_PRODUCT_E220                     0x1003
+#define HUAWEI_PRODUCT_E220BIS                  0x1004
 
 #define NOVATELWIRELESS_VENDOR_ID               0x1410
+#define DELL_VENDOR_ID                          0x413C
 
 #define ANYDATA_VENDOR_ID                       0x16d5
 #define ANYDATA_PRODUCT_ADU_E100A               0x6501
@@ -119,8 +121,6 @@ static int  option_send_setup(struct usb_serial_port *port);
 #define BANDRICH_PRODUCT_C100_1                 0x1002
 #define BANDRICH_PRODUCT_C100_2                 0x1003
 
-#define DELL_VENDOR_ID                          0x413C
-
 static struct usb_device_id option_ids[] = {
         { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) },
         { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) },
@@ -159,6 +159,7 @@ static struct usb_device_id option_ids[] = {
         { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_KOI_NETWORK) },
         { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E600) },
         { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220) },
+        { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220BIS) },
         { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x1100) }, /* Novatel Merlin XS620/S640 */
         { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x1110) }, /* Novatel Merlin S620 */
         { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x1120) }, /* Novatel Merlin EX720 */
@@ -171,11 +172,17 @@ static struct usb_device_id option_ids[] = {
         { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x2110) }, /* Novatel Merlin ES620 / Merlin ES720 / Ovation U720 */
         { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x2130) }, /* Novatel Merlin ES620 SM Bus */
         { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x2410) }, /* Novatel EU740 */
+        { USB_DEVICE(DELL_VENDOR_ID, 0x8114) }, /* Dell Wireless 5700 Mobile Broadband CDMA/EVDO Mini-Card == Novatel Expedite EV620 CDMA/EV-DO */
+        { USB_DEVICE(DELL_VENDOR_ID, 0x8115) }, /* Dell Wireless 5500 Mobile Broadband HSDPA Mini-Card == Novatel Expedite EU740 HSDPA/3G */
+        { USB_DEVICE(DELL_VENDOR_ID, 0x8116) }, /* Dell Wireless 5505 Mobile Broadband HSDPA Mini-Card == Novatel Expedite EU740 HSDPA/3G */
+        { USB_DEVICE(DELL_VENDOR_ID, 0x8117) }, /* Dell Wireless 5700 Mobile Broadband CDMA/EVDO ExpressCard == Novatel Merlin XV620 CDMA/EV-DO */
+        { USB_DEVICE(DELL_VENDOR_ID, 0x8118) }, /* Dell Wireless 5510 Mobile Broadband HSDPA ExpressCard == Novatel Merlin XU870 HSDPA/3G */
+        { USB_DEVICE(DELL_VENDOR_ID, 0x8128) }, /* Dell Wireless 5700 Mobile Broadband CDMA/EVDO Mini-Card == Novatel Expedite E720 CDMA/EV-DO */
+        { USB_DEVICE(DELL_VENDOR_ID, 0x8137) }, /* Dell Wireless HSDPA 5520 */
         { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_E100A) },
         { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_500A) },
         { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_1) },
         { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_2) },
-        { USB_DEVICE(DELL_VENDOR_ID, 0x8118) },         /* Dell Wireless 5510 Mobile Broadband HSDPA ExpressCard */
         { } /* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, option_ids);
diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c
index d7db71eca520..d19861166b50 100644
--- a/drivers/usb/serial/oti6858.c
+++ b/drivers/usb/serial/oti6858.c
@@ -817,23 +817,6 @@ static int oti6858_ioctl(struct usb_serial_port *port, struct file *file,
                                 __FUNCTION__, port->number, cmd, arg);
 
         switch (cmd) {
-                case TCGETS:
-                        if (copy_to_user(user_arg, port->tty->termios,
-                                                sizeof(struct ktermios))) {
-                                return -EFAULT;
-                        }
-                        return 0;
-
-                case TCSETS:
-                case TCSETSW:   /* FIXME: this is not the same! */
-                case TCSETSF:   /* FIXME: this is not the same! */
-                        if (copy_from_user(port->tty->termios, user_arg,
-                                                sizeof(struct ktermios))) {
-                                return -EFAULT;
-                        }
-                        oti6858_set_termios(port, NULL);
-                        return 0;
-
                 case TCFLSH:
                         /* FIXME */
                         return 0;
@@ -1161,7 +1144,7 @@ static struct pl2303_buf *pl2303_buf_alloc(unsigned int size)
         if (size == 0)
                 return NULL;
 
-        pb = (struct pl2303_buf *)kmalloc(sizeof(struct pl2303_buf), GFP_KERNEL);
+        pb = kmalloc(sizeof(struct pl2303_buf), GFP_KERNEL);
         if (pb == NULL)
                 return NULL;
 
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index f9f85f56f0db..1da57fd9ea23 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -73,6 +73,7 @@ static struct usb_device_id id_table [] = {
         { USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_SX1) },
         { USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_X65) },
         { USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_X75) },
+        { USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_EF81) },
         { USB_DEVICE(SYNTECH_VENDOR_ID, SYNTECH_PRODUCT_ID) },
         { USB_DEVICE(NOKIA_CA42_VENDOR_ID, NOKIA_CA42_PRODUCT_ID) },
         { USB_DEVICE(CA_42_CA42_VENDOR_ID, CA_42_CA42_PRODUCT_ID) },
diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h
index f9a71d0c102e..c39bace5cbcc 100644
--- a/drivers/usb/serial/pl2303.h
+++ b/drivers/usb/serial/pl2303.h
@@ -59,6 +59,7 @@
 #define SIEMENS_PRODUCT_ID_SX1  0x0001
 #define SIEMENS_PRODUCT_ID_X65  0x0003
 #define SIEMENS_PRODUCT_ID_X75  0x0004
+#define SIEMENS_PRODUCT_ID_EF81 0x0005
 
 #define SYNTECH_VENDOR_ID       0x0745
 #define SYNTECH_PRODUCT_ID      0x0001
diff --git a/drivers/usb/serial/safe_serial.c b/drivers/usb/serial/safe_serial.c
index 86899d55d8d8..4e6dcc199be9 100644
--- a/drivers/usb/serial/safe_serial.c
+++ b/drivers/usb/serial/safe_serial.c
@@ -74,13 +74,13 @@
 #include <linux/usb/serial.h>
 
 
-#ifndef CONFIG_USB_SAFE_PADDED
-#define CONFIG_USB_SAFE_PADDED 0
+#ifndef CONFIG_USB_SERIAL_SAFE_PADDED
+#define CONFIG_USB_SERIAL_SAFE_PADDED 0
 #endif
 
 static int debug;
 static int safe = 1;
-static int padded = CONFIG_USB_SAFE_PADDED;
+static int padded = CONFIG_USB_SERIAL_SAFE_PADDED;
 
 #define DRIVER_VERSION "v0.0b"
 #define DRIVER_AUTHOR "sl@lineo.com, tbr@lineo.com"
@@ -90,18 +90,12 @@ MODULE_AUTHOR (DRIVER_AUTHOR);
 MODULE_DESCRIPTION (DRIVER_DESC);
 MODULE_LICENSE("GPL");
 
-#if defined(CONFIG_USBD_SAFE_SERIAL_VENDOR) && !defined(CONFIG_USBD_SAFE_SERIAL_PRODUCT)
-#error "SAFE_SERIAL_VENDOR defined without SAFE_SERIAL_PRODUCT"
-#endif
-
-#if ! defined(CONFIG_USBD_SAFE_SERIAL_VENDOR)
 static __u16 vendor;            // no default
 static __u16 product;           // no default
 module_param(vendor, ushort, 0);
 MODULE_PARM_DESC(vendor, "User specified USB idVendor (required)");
 module_param(product, ushort, 0);
 MODULE_PARM_DESC(product, "User specified USB idProduct (required)");
-#endif
 
 module_param(debug, bool, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(debug, "Debug enabled or not");
@@ -145,11 +139,6 @@ static struct usb_device_id id_table[] = {
         {MY_USB_DEVICE (0x4dd, 0x8003, CDC_DEVICE_CLASS, LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)},  // Collie 
         {MY_USB_DEVICE (0x4dd, 0x8004, CDC_DEVICE_CLASS, LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)},  // Collie 
         {MY_USB_DEVICE (0x5f9, 0xffff, CDC_DEVICE_CLASS, LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)},  // Sharp tmp
-#if defined(CONFIG_USB_SAFE_SERIAL_VENDOR)
-        {MY_USB_DEVICE
-         (CONFIG_USB_SAFE_SERIAL_VENDOR, CONFIG_USB_SAFE_SERIAL_PRODUCT, CDC_DEVICE_CLASS,
-          LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)},
-#endif
         // extra null entry for module 
         // vendor/produc parameters
         {MY_USB_DEVICE (0, 0, CDC_DEVICE_CLASS, LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)},
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index f98626ae75fe..1f0149495fb4 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -214,13 +214,13 @@ static int debug;
 static int low_latency = TI_DEFAULT_LOW_LATENCY;
 static int closing_wait = TI_DEFAULT_CLOSING_WAIT;
 static ushort vendor_3410[TI_EXTRA_VID_PID_COUNT];
-static int vendor_3410_count;
+static unsigned int vendor_3410_count;
 static ushort product_3410[TI_EXTRA_VID_PID_COUNT];
-static int product_3410_count;
+static unsigned int product_3410_count;
 static ushort vendor_5052[TI_EXTRA_VID_PID_COUNT];
-static int vendor_5052_count;
+static unsigned int vendor_5052_count;
 static ushort product_5052[TI_EXTRA_VID_PID_COUNT];
-static int product_5052_count;
+static unsigned int product_5052_count;
 
 /* supported devices */
 /* the array dimension is the number of default entries plus */
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 9bf01a5efc84..4b1bd7def4a5 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -578,6 +578,17 @@ static void kill_traffic(struct usb_serial_port *port)
 {
         usb_kill_urb(port->read_urb);
         usb_kill_urb(port->write_urb);
+        /*
+         * This is tricky.
+         * Some drivers submit the read_urb in the
+         * handler for the write_urb or vice versa
+         * this order determines the order in which
+         * usb_kill_urb() must be used to reliably
+         * kill the URBs. As it is unknown here,
+         * both orders must be used in turn.
+         * The call below is not redundant.
+         */
+        usb_kill_urb(port->read_urb);
         usb_kill_urb(port->interrupt_in_urb);
         usb_kill_urb(port->interrupt_out_urb);
 }
@@ -651,16 +662,14 @@ exit:
 
 static struct usb_serial_driver *search_serial_device(struct usb_interface *iface)
 {
-        struct list_head *p;
         const struct usb_device_id *id;
-        struct usb_serial_driver *t;
+        struct usb_serial_driver *drv;
 
         /* Check if the usb id matches a known device */
-        list_for_each(p, &usb_serial_driver_list) {
-                t = list_entry(p, struct usb_serial_driver, driver_list);
-                id = get_iface_id(t, iface);
+        list_for_each_entry(drv, &usb_serial_driver_list, driver_list) {
+                id = get_iface_id(drv, iface);
                 if (id)
-                        return t;
+                        return drv;
         }
 
         return NULL;
@@ -800,9 +809,6 @@ int usb_serial_probe(struct usb_interface *interface,
         /* END HORRIBLE HACK FOR PL2303 */
 #endif
 
-        /* found all that we need */
-        dev_info(&interface->dev, "%s converter detected\n", type->description);
-
 #ifdef CONFIG_USB_SERIAL_GENERIC
         if (type == &usb_serial_generic_device) {
                 num_ports = num_bulk_out;
@@ -836,6 +842,24 @@ int usb_serial_probe(struct usb_interface *interface,
         serial->num_interrupt_in = num_interrupt_in;
         serial->num_interrupt_out = num_interrupt_out;
 
+        /* check that the device meets the driver's requirements */
+        if ((type->num_interrupt_in != NUM_DONT_CARE &&
+                                type->num_interrupt_in != num_interrupt_in)
+                        || (type->num_interrupt_out != NUM_DONT_CARE &&
+                                type->num_interrupt_out != num_interrupt_out)
+                        || (type->num_bulk_in != NUM_DONT_CARE &&
+                                type->num_bulk_in != num_bulk_in)
+                        || (type->num_bulk_out != NUM_DONT_CARE &&
+                                type->num_bulk_out != num_bulk_out)) {
+                dbg("wrong number of endpoints");
+                kfree(serial);
+                return -EIO;
+        }
+
+        /* found all that we need */
+        dev_info(&interface->dev, "%s converter detected\n",
+                        type->description);
+
         /* create our ports, we need as many as the max endpoints */
         /* we don't use num_ports here cauz some devices have more endpoint pairs than ports */
         max_endpoints = max(num_bulk_in, num_bulk_out);
diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c
index 7d84a7647e81..7ee087fed913 100644
--- a/drivers/usb/serial/visor.c
+++ b/drivers/usb/serial/visor.c
@@ -46,7 +46,6 @@ static int  visor_probe		(struct usb_serial *serial, const struct usb_device_id
 static int  visor_calc_num_ports(struct usb_serial *serial);
 static void visor_shutdown      (struct usb_serial *serial);
 static int  visor_ioctl         (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg);
-static void visor_set_termios   (struct usb_serial_port *port, struct ktermios *old_termios);
 static void visor_write_bulk_callback   (struct urb *urb);
 static void visor_read_bulk_callback    (struct urb *urb);
 static void visor_read_int_callback     (struct urb *urb);
@@ -104,6 +103,8 @@ static struct usb_device_id id_table [] = {
                 .driver_info = (kernel_ulong_t)&palm_os_4_probe },
         { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_TJ25_ID),
                 .driver_info = (kernel_ulong_t)&palm_os_4_probe },
+        { USB_DEVICE(ACER_VENDOR_ID, ACER_S10_ID),
+                .driver_info = (kernel_ulong_t)&palm_os_4_probe },
         { USB_DEVICE(SAMSUNG_VENDOR_ID, SAMSUNG_SCH_I330_ID), 
                 .driver_info = (kernel_ulong_t)&palm_os_4_probe },
         { USB_DEVICE(SAMSUNG_VENDOR_ID, SAMSUNG_SPH_I500_ID), 
@@ -201,7 +202,6 @@ static struct usb_serial_driver handspring_device = {
         .calc_num_ports =       visor_calc_num_ports,
         .shutdown =             visor_shutdown,
         .ioctl =                visor_ioctl,
-        .set_termios =          visor_set_termios,
         .write =                visor_write,
         .write_room =           visor_write_room,
         .chars_in_buffer =      visor_chars_in_buffer,
@@ -232,7 +232,6 @@ static struct usb_serial_driver clie_5_device = {
         .calc_num_ports =       visor_calc_num_ports,
         .shutdown =             visor_shutdown,
         .ioctl =                visor_ioctl,
-        .set_termios =          visor_set_termios,
         .write =                visor_write,
         .write_room =           visor_write_room,
         .chars_in_buffer =      visor_chars_in_buffer,
@@ -260,7 +259,6 @@ static struct usb_serial_driver clie_3_5_device = {
         .unthrottle =           visor_unthrottle,
         .attach =               clie_3_5_startup,
         .ioctl =                visor_ioctl,
-        .set_termios =          visor_set_termios,
         .write =                visor_write,
         .write_room =           visor_write_room,
         .chars_in_buffer =      visor_chars_in_buffer,
@@ -934,66 +932,6 @@ static int visor_ioctl (struct usb_serial_port *port, struct file * file, unsign
         return -ENOIOCTLCMD;
 }
 
-
-/* This function is all nice and good, but we don't change anything based on it :) */
-static void visor_set_termios (struct usb_serial_port *port, struct ktermios *old_termios)
-{
-        unsigned int cflag;
-
-        dbg("%s - port %d", __FUNCTION__, port->number);
-
-        if ((!port->tty) || (!port->tty->termios)) {
-                dbg("%s - no tty structures", __FUNCTION__);
-                return;
-        }
-
-        cflag = port->tty->termios->c_cflag;
-
-        /* get the byte size */
-        switch (cflag & CSIZE) {
-                case CS5:       dbg("%s - data bits = 5", __FUNCTION__);   break;
-                case CS6:       dbg("%s - data bits = 6", __FUNCTION__);   break;
-                case CS7:       dbg("%s - data bits = 7", __FUNCTION__);   break;
-                default:
-                case CS8:       dbg("%s - data bits = 8", __FUNCTION__);   break;
-        }
-        
-        /* determine the parity */
-        if (cflag & PARENB)
-                if (cflag & PARODD)
-                        dbg("%s - parity = odd", __FUNCTION__);
-                else
-                        dbg("%s - parity = even", __FUNCTION__);
-        else
-                dbg("%s - parity = none", __FUNCTION__);
-
-        /* figure out the stop bits requested */
-        if (cflag & CSTOPB)
-                dbg("%s - stop bits = 2", __FUNCTION__);
-        else
-                dbg("%s - stop bits = 1", __FUNCTION__);
-
-        
-        /* figure out the flow control settings */
-        if (cflag & CRTSCTS)
-                dbg("%s - RTS/CTS is enabled", __FUNCTION__);
-        else
-                dbg("%s - RTS/CTS is disabled", __FUNCTION__);
-        
-        /* determine software flow control */
-        if (I_IXOFF(port->tty))
-                dbg("%s - XON/XOFF is enabled, XON = %2x, XOFF = %2x",
-                    __FUNCTION__, START_CHAR(port->tty), STOP_CHAR(port->tty));
-        else
-                dbg("%s - XON/XOFF is disabled", __FUNCTION__);
-
-        /* get the baud rate wanted */
-        dbg("%s - baud rate = %d", __FUNCTION__, tty_get_baud_rate(port->tty));
-
-        return;
-}
-
-
 static int __init visor_init (void)
 {
         int i, retval;
diff --git a/drivers/usb/serial/visor.h b/drivers/usb/serial/visor.h
index 4ce6f62a6f39..57229cf66477 100644
--- a/drivers/usb/serial/visor.h
+++ b/drivers/usb/serial/visor.h
@@ -48,6 +48,9 @@
 #define SONY_CLIE_UX50_ID               0x0144
 #define SONY_CLIE_TJ25_ID               0x0169
 
+#define ACER_VENDOR_ID                  0x0502
+#define ACER_S10_ID                     0x0001
+
 #define SAMSUNG_VENDOR_ID               0x04E8
 #define SAMSUNG_SCH_I330_ID             0x8001
 #define SAMSUNG_SPH_I500_ID             0x6601
diff --git a/drivers/usb/storage/initializers.c b/drivers/usb/storage/initializers.c
index 3a41740cad97..ee5b42aa5363 100644
--- a/drivers/usb/storage/initializers.c
+++ b/drivers/usb/storage/initializers.c
@@ -90,3 +90,17 @@ int usb_stor_ucr61s2b_init(struct us_data *us)
 
         return (res ? -1 : 0);
 }
+
+/* This places the HUAWEI E220 devices in multi-port mode */
+int usb_stor_huawei_e220_init(struct us_data *us)
+{
+        int result;
+
+        us->iobuf[0] = 0x1;
+        result = usb_stor_control_msg(us, us->send_ctrl_pipe,
+                                      USB_REQ_SET_FEATURE,
+                                      USB_TYPE_STANDARD | USB_RECIP_DEVICE,
+                                      0x01, 0x0, us->iobuf, 0x1, 1000);
+        US_DEBUGP("usb_control_msg performing result is %d\n", result);
+        return (result ? 0 : -1);
+}
diff --git a/drivers/usb/storage/initializers.h b/drivers/usb/storage/initializers.h
index e2967a4d48a2..ad3ffd4236c2 100644
--- a/drivers/usb/storage/initializers.h
+++ b/drivers/usb/storage/initializers.h
@@ -47,3 +47,6 @@ int usb_stor_euscsi_init(struct us_data *us);
 /* This function is required to activate all four slots on the UCR-61S2B
  * flash reader */
 int usb_stor_ucr61s2b_init(struct us_data *us);
+
+/* This places the HUAWEI E220 devices in multi-port mode */
+int usb_stor_huawei_e220_init(struct us_data *us);
diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c
index 47e56079925d..1ba19eaa1970 100644
--- a/drivers/usb/storage/scsiglue.c
+++ b/drivers/usb/storage/scsiglue.c
@@ -285,15 +285,10 @@ static int device_reset(struct scsi_cmnd *srb)
 
         US_DEBUGP("%s called\n", __FUNCTION__);
 
-        result = usb_autopm_get_interface(us->pusb_intf);
-        if (result == 0) {
-
-                /* lock the device pointers and do the reset */
-                mutex_lock(&(us->dev_mutex));
-                result = us->transport_reset(us);
-                mutex_unlock(&us->dev_mutex);
-                usb_autopm_put_interface(us->pusb_intf);
-        }
+        /* lock the device pointers and do the reset */
+        mutex_lock(&(us->dev_mutex));
+        result = us->transport_reset(us);
+        mutex_unlock(&us->dev_mutex);
 
         return result < 0 ? FAILED : SUCCESS;
 }
diff --git a/drivers/usb/storage/shuttle_usbat.c b/drivers/usb/storage/shuttle_usbat.c
index 5e27297c0175..17ca4d73577b 100644
--- a/drivers/usb/storage/shuttle_usbat.c
+++ b/drivers/usb/storage/shuttle_usbat.c
@@ -190,9 +190,6 @@ static int usbat_check_status(struct us_data *us)
         unsigned char *reply = us->iobuf;
         int rc;
 
-        if (!us)
-                return USB_STOR_TRANSPORT_ERROR;
-
         rc = usbat_get_status(us, reply);
         if (rc != USB_STOR_XFER_GOOD)
                 return USB_STOR_TRANSPORT_FAILED;
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index d8d008d42946..9b656ec427d0 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -198,7 +198,7 @@ UNUSUAL_DEV(  0x0421, 0x044e, 0x0100, 0x0100,
                 US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ),
 
 /* Reported by Bardur Arantsson <bardur@scientician.net> */
-UNUSUAL_DEV(  0x0421, 0x047c, 0x0370, 0x0370,
+UNUSUAL_DEV(  0x0421, 0x047c, 0x0370, 0x0610,
                 "Nokia",
                 "6131",
                 US_SC_DEVICE, US_PR_DEVICE, NULL,
@@ -341,13 +341,41 @@ UNUSUAL_DEV(  0x04b0, 0x040d, 0x0100, 0x0100,
                 US_SC_DEVICE, US_PR_DEVICE, NULL,
                 US_FL_FIX_CAPACITY),
 
+/* Reported by Graber and Mike Pagano <mpagano-kernel@mpagano.com> */
+UNUSUAL_DEV(  0x04b0, 0x040f, 0x0200, 0x0200,
+       "NIKON",
+       "NIKON DSC D200",
+       US_SC_DEVICE, US_PR_DEVICE, NULL,
+       US_FL_FIX_CAPACITY),
+
 /* Reported by Emil Larsson <emil@swip.net> */
-UNUSUAL_DEV(  0x04b0, 0x0411, 0x0100, 0x0100,
+UNUSUAL_DEV(  0x04b0, 0x0411, 0x0100, 0x0101,
                 "NIKON",
                 "NIKON DSC D80",
                 US_SC_DEVICE, US_PR_DEVICE, NULL,
                 US_FL_FIX_CAPACITY),
 
+/* Reported by Ortwin Glueck <odi@odi.ch> */
+UNUSUAL_DEV(  0x04b0, 0x0413, 0x0110, 0x0110,
+                "NIKON",
+                "NIKON DSC D40",
+                US_SC_DEVICE, US_PR_DEVICE, NULL,
+                US_FL_FIX_CAPACITY),
+
+/* Reported by Paul Check <paul@openstreet.com> */
+UNUSUAL_DEV(  0x04b0, 0x0415, 0x0100, 0x0100,
+                "NIKON",
+                "NIKON DSC D2Xs",
+                US_SC_DEVICE, US_PR_DEVICE, NULL,
+                US_FL_FIX_CAPACITY),
+
+/* Reported by Shan Destromp (shansan@gmail.com) */
+UNUSUAL_DEV(  0x04b0, 0x0417, 0x0100, 0x0100,
+                "NIKON",
+                "NIKON DSC D40X",
+                US_SC_DEVICE, US_PR_DEVICE, NULL,
+                US_FL_FIX_CAPACITY),
+
 /* BENQ DC5330
  * Reported by Manuel Fombuena <mfombuena@ya.com> and
  * Frank Copeland <fjc@thingy.apana.org.au> */
@@ -897,6 +925,22 @@ UNUSUAL_DEV(  0x069b, 0x3004, 0x0001, 0x0001,
                 US_SC_DEVICE, US_PR_DEVICE, NULL,
                 US_FL_FIX_CAPACITY ),
 
+/* Reported by Massimiliano Ghilardi <massimiliano.ghilardi@gmail.com>
+ * This USB MP3/AVI player device fails and disconnects if more than 128
+ * sectors (64kB) are read/written in a single command, and may be present
+ * at least in the following products:
+ *   "Magnex Digital Video Panel DVP 1800"
+ *   "MP4 AIGO 4GB SLOT SD"
+ *   "Teclast TL-C260 MP3"
+ *   "i.Meizu PMP MP3/MP4"
+ *   "Speed MV8 MP4 Audio Player"
+ */
+UNUSUAL_DEV(  0x071b, 0x3203, 0x0100, 0x0100,
+                "RockChip",
+                "ROCK MP3",
+                US_SC_DEVICE, US_PR_DEVICE, NULL,
+                US_FL_MAX_SECTORS_64),
+
 /* Reported by Olivier Blondeau <zeitoun@gmail.com> */
 UNUSUAL_DEV(  0x0727, 0x0306, 0x0100, 0x0100,
                 "ATMEL",
@@ -1393,6 +1437,13 @@ UNUSUAL_DEV(  0x0fce, 0xe030, 0x0000, 0x0000,
                 US_SC_DEVICE, US_PR_DEVICE, NULL,
                 US_FL_FIX_CAPACITY | US_FL_IGNORE_RESIDUE ),
 
+/* Reported by Ricardo Barberis <ricardo@dattatec.com> */
+UNUSUAL_DEV(  0x0fce, 0xe092, 0x0000, 0x0000,
+                "Sony Ericsson",
+                "P1i",
+                US_SC_DEVICE, US_PR_DEVICE, NULL,
+                US_FL_IGNORE_RESIDUE ),
+
 /* Reported by Emmanuel Vasilakis <evas@forthnet.gr> */
 UNUSUAL_DEV(  0x0fce, 0xe031, 0x0000, 0x0000,
                 "Sony Ericsson",
@@ -1433,6 +1484,17 @@ UNUSUAL_DEV(  0x1210, 0x0003, 0x0100, 0x0100,
                 US_SC_DEVICE, US_PR_DEVICE, NULL,
                 US_FL_IGNORE_RESIDUE ),
 
+/* Reported by fangxiaozhi <fangxiaozhi60675@huawei.com>
+ * and by linlei <linlei83@huawei.com>
+ * Patch reworked by Johann Wilhelm <johann.wilhelm@student.tugraz.at>
+ * This brings the HUAWEI E220 devices into multi-port mode
+ */
+UNUSUAL_DEV( 0x12d1, 0x1003, 0x0000, 0x0000,
+                "HUAWEI MOBILE",
+                "Mass Storage",
+                US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+                0),
+
 /* Reported by Vilius Bilinkevicius <vilisas AT xxx DOT lt) */
 UNUSUAL_DEV(  0x132b, 0x000b, 0x0001, 0x0001,
                 "Minolta",
diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c
index 28842d208bb0..3451e8d03ab0 100644
--- a/drivers/usb/storage/usb.c
+++ b/drivers/usb/storage/usb.c
@@ -112,13 +112,6 @@ module_param(delay_use, uint, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(delay_use, "seconds to delay before using a new device");
 
 
-/* These are used to make sure the module doesn't unload before all the
- * threads have exited.
- */
-static atomic_t total_threads = ATOMIC_INIT(0);
-static DECLARE_COMPLETION(threads_gone);
-
-
 /*
  * The entries in this table correspond, line for line,
  * with the entries of us_unusual_dev_list[].
@@ -191,14 +184,16 @@ static int storage_suspend(struct usb_interface *iface, pm_message_t message)
 {
         struct us_data *us = usb_get_intfdata(iface);
 
-        US_DEBUGP("%s\n", __FUNCTION__);
-
         /* Wait until no command is running */
         mutex_lock(&us->dev_mutex);
 
+        US_DEBUGP("%s\n", __FUNCTION__);
         if (us->suspend_resume_hook)
                 (us->suspend_resume_hook)(us, US_SUSPEND);
 
+        /* When runtime PM is working, we'll set a flag to indicate
+         * whether we should autoresume when a SCSI request arrives. */
+
         mutex_unlock(&us->dev_mutex);
         return 0;
 }
@@ -207,11 +202,13 @@ static int storage_resume(struct usb_interface *iface)
 {
         struct us_data *us = usb_get_intfdata(iface);
 
-        US_DEBUGP("%s\n", __FUNCTION__);
+        mutex_lock(&us->dev_mutex);
 
+        US_DEBUGP("%s\n", __FUNCTION__);
         if (us->suspend_resume_hook)
                 (us->suspend_resume_hook)(us, US_RESUME);
 
+        mutex_unlock(&us->dev_mutex);
         return 0;
 }
 
@@ -309,7 +306,6 @@ static int usb_stor_control_thread(void * __us)
 {
         struct us_data *us = (struct us_data *)__us;
         struct Scsi_Host *host = us_to_host(us);
-        int autopm_rc;
 
         for(;;) {
                 US_DEBUGP("*** thread sleeping.\n");
@@ -318,9 +314,6 @@ static int usb_stor_control_thread(void * __us)
                         
                 US_DEBUGP("*** thread awakened.\n");
 
-                /* Autoresume the device */
-                autopm_rc = usb_autopm_get_interface(us->pusb_intf);
-
                 /* lock the device pointers */
                 mutex_lock(&(us->dev_mutex));
 
@@ -379,12 +372,6 @@ static int usb_stor_control_thread(void * __us)
                         us->srb->result = SAM_STAT_GOOD;
                 }
 
-                /* Did the autoresume fail? */
-                else if (autopm_rc < 0) {
-                        US_DEBUGP("Could not wake device\n");
-                        us->srb->result = DID_ERROR << 16;
-                }
-
                 /* we've got a command, let's do it! */
                 else {
                         US_DEBUG(usb_stor_show_command(us->srb));
@@ -427,10 +414,6 @@ SkipForAbort:
 
                 /* unlock the device pointers */
                 mutex_unlock(&us->dev_mutex);
-
-                /* Start an autosuspend */
-                if (autopm_rc == 0)
-                        usb_autopm_put_interface(us->pusb_intf);
         } /* for (;;) */
 
         /* Wait until we are told to stop */
@@ -879,9 +862,6 @@ static void quiesce_and_remove_host(struct us_data *us)
         usb_stor_stop_transport(us);
         wake_up(&us->delay_wait);
 
-        /* It doesn't matter if the SCSI-scanning thread is still running.
-         * The thread will exit when it sees the DISCONNECTING flag. */
-
         /* queuecommand won't accept any new commands and the control
          * thread won't execute a previously-queued command.  If there
          * is such a command pending, complete it with an error. */
@@ -891,12 +871,16 @@ static void quiesce_and_remove_host(struct us_data *us)
                 scsi_lock(host);
                 us->srb->scsi_done(us->srb);
                 us->srb = NULL;
+                complete(&us->notify);          /* in case of an abort */
                 scsi_unlock(host);
         }
         mutex_unlock(&us->dev_mutex);
 
         /* Now we own no commands so it's safe to remove the SCSI host */
         scsi_remove_host(host);
+
+        /* Wait for the SCSI-scanning thread to stop */
+        wait_for_completion(&us->scanning_done);
 }
 
 /* Second stage of disconnect processing: deallocate all resources */
@@ -947,9 +931,7 @@ retry:
                 /* Should we unbind if no devices were detected? */
         }
 
-        scsi_host_put(us_to_host(us));
-        usb_autopm_put_interface(us->pusb_intf);
-        complete_and_exit(&threads_gone, 0);
+        complete_and_exit(&us->scanning_done, 0);
 }
 
 
@@ -978,12 +960,17 @@ static int storage_probe(struct usb_interface *intf,
                 return -ENOMEM;
         }
 
+        /*
+         * Allow 16-byte CDBs and thus > 2TB
+         */
+        host->max_cmd_len = 16;
         us = host_to_us(host);
         memset(us, 0, sizeof(struct us_data));
         mutex_init(&(us->dev_mutex));
         init_MUTEX_LOCKED(&(us->sema));
         init_completion(&(us->notify));
         init_waitqueue_head(&us->delay_wait);
+        init_completion(&us->scanning_done);
 
         /* Associate the us_data structure with the USB device */
         result = associate_dev(us, intf);
@@ -1033,12 +1020,6 @@ static int storage_probe(struct usb_interface *intf,
                 goto BadDevice;
         }
 
-        /* Take a reference to the host for the scanning thread and
-         * count it among all the threads we have launched.  Then
-         * start it up. */
-        scsi_host_get(us_to_host(us));
-        atomic_inc(&total_threads);
-        usb_autopm_get_interface(intf); /* dropped in the scanning thread */
         wake_up_process(th);
 
         return 0;
@@ -1076,7 +1057,6 @@ static struct usb_driver usb_storage_driver = {
         .pre_reset =    storage_pre_reset,
         .post_reset =   storage_post_reset,
         .id_table =     storage_usb_ids,
-        .supports_autosuspend = 1,
 };
 
 static int __init usb_stor_init(void)
@@ -1104,16 +1084,6 @@ static void __exit usb_stor_exit(void)
         US_DEBUGP("-- calling usb_deregister()\n");
         usb_deregister(&usb_storage_driver) ;
 
-        /* Don't return until all of our control and scanning threads
-         * have exited.  Since each thread signals threads_gone as its
-         * last act, we have to call wait_for_completion the right number
-         * of times.
-         */
-        while (atomic_read(&total_threads) > 0) {
-                wait_for_completion(&threads_gone);
-                atomic_dec(&total_threads);
-        }
-
         usb_usual_clear_present(USB_US_TYPE_STOR);
 }
 
diff --git a/drivers/usb/storage/usb.h b/drivers/usb/storage/usb.h
index 6445665b1577..8d87503e2560 100644
--- a/drivers/usb/storage/usb.h
+++ b/drivers/usb/storage/usb.h
@@ -150,6 +150,7 @@ struct us_data {
         struct semaphore        sema;            /* to sleep thread on      */
         struct completion       notify;          /* thread begin/end        */
         wait_queue_head_t       delay_wait;      /* wait during scan, reset */
+        struct completion       scanning_done;   /* wait for scan thread    */
 
         /* subdriver information */
         void                    *extra;          /* Any extra data          */
diff --git a/drivers/usb/usb-skeleton.c b/drivers/usb/usb-skeleton.c
index 8de11deb5d14..c815a40e167f 100644
--- a/drivers/usb/usb-skeleton.c
+++ b/drivers/usb/usb-skeleton.c
@@ -125,6 +125,7 @@ static int skel_open(struct inode *inode, struct file *file)
 
         /* save our object in the file's private structure */
         file->private_data = dev;
+        mutex_unlock(&dev->io_mutex);
 
 exit:
         return retval;