20 files changed, 235 insertions, 85 deletions

diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 61d75507d5d0..162c95a088ed 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -1596,6 +1596,7 @@ static const struct usb_device_id acm_ids[] = {
         { NOKIA_PCSUITE_ACM_INFO(0x00e9), }, /* Nokia 5320 XpressMusic */
         { NOKIA_PCSUITE_ACM_INFO(0x0108), }, /* Nokia 5320 XpressMusic 2G */
         { NOKIA_PCSUITE_ACM_INFO(0x01f5), }, /* Nokia N97, RM-505 */
+        { NOKIA_PCSUITE_ACM_INFO(0x02e3), }, /* Nokia 5230, RM-588 */
 
         /* NOTE: non-Nokia COMM/ACM/0xff is likely MSFT RNDIS... NOT a modem! */
 
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 83e7bbbe97fa..70cccc75a362 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -1982,6 +1982,8 @@ static int hub_port_wait_reset(struct usb_hub *hub, int port1,
                     (portstatus & USB_PORT_STAT_ENABLE)) {
                         if (hub_is_wusb(hub))
                                 udev->speed = USB_SPEED_WIRELESS;
+                        else if (portstatus & USB_PORT_STAT_SUPER_SPEED)
+                                udev->speed = USB_SPEED_SUPER;
                         else if (portstatus & USB_PORT_STAT_HIGH_SPEED)
                                 udev->speed = USB_SPEED_HIGH;
                         else if (portstatus & USB_PORT_STAT_LOW_SPEED)
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index f22d03df8b17..db99c084df92 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -41,6 +41,10 @@ static const struct usb_device_id usb_quirk_list[] = {
         /* Philips PSC805 audio device */
         { USB_DEVICE(0x0471, 0x0155), .driver_info = USB_QUIRK_RESET_RESUME },
 
+        /* Artisman Watchdog Dongle */
+        { USB_DEVICE(0x04b4, 0x0526), .driver_info =
+                        USB_QUIRK_CONFIG_INTF_STRINGS },
+
         /* Roland SC-8820 */
         { USB_DEVICE(0x0582, 0x0007), .driver_info = USB_QUIRK_RESET_RESUME },
 
@@ -64,6 +68,9 @@ static const struct usb_device_id usb_quirk_list[] = {
         /* X-Rite/Gretag-Macbeth Eye-One Pro display colorimeter */
         { USB_DEVICE(0x0971, 0x2000), .driver_info = USB_QUIRK_NO_SET_INTF },
 
+        /* Broadcom BCM92035DGROM BT dongle */
+        { USB_DEVICE(0x0a5c, 0x2021), .driver_info = USB_QUIRK_RESET_RESUME },
+
         /* Action Semiconductor flash disk */
         { USB_DEVICE(0x10d6, 0x2200), .driver_info =
                         USB_QUIRK_STRING_FETCH_255 },
diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
index eaa79c8a9b8c..93ead19507b6 100644
--- a/drivers/usb/gadget/at91_udc.c
+++ b/drivers/usb/gadget/at91_udc.c
@@ -76,11 +76,12 @@
 static const char driver_name [] = "at91_udc";
 static const char ep0name[] = "ep0";
 
+#define VBUS_POLL_TIMEOUT       msecs_to_jiffies(1000)
 
-#define at91_udp_read(dev, reg) \
-        __raw_readl((dev)->udp_baseaddr + (reg))
-#define at91_udp_write(dev, reg, val) \
-        __raw_writel((val), (dev)->udp_baseaddr + (reg))
+#define at91_udp_read(udc, reg) \
+        __raw_readl((udc)->udp_baseaddr + (reg))
+#define at91_udp_write(udc, reg, val) \
+        __raw_writel((val), (udc)->udp_baseaddr + (reg))
 
 /*-------------------------------------------------------------------------*/
 
@@ -102,8 +103,9 @@ static void proc_ep_show(struct seq_file *s, struct at91_ep *ep)
         u32                     csr;
         struct at91_request     *req;
         unsigned long   flags;
+        struct at91_udc *udc = ep->udc;
 
-        local_irq_save(flags);
+        spin_lock_irqsave(&udc->lock, flags);
 
         csr = __raw_readl(ep->creg);
 
@@ -147,7 +149,7 @@ static void proc_ep_show(struct seq_file *s, struct at91_ep *ep)
                                 &req->req, length,
                                 req->req.length, req->req.buf);
         }
-        local_irq_restore(flags);
+        spin_unlock_irqrestore(&udc->lock, flags);
 }
 
 static void proc_irq_show(struct seq_file *s, const char *label, u32 mask)
@@ -272,7 +274,9 @@ static void done(struct at91_ep *ep, struct at91_request *req, int status)
                 VDBG("%s done %p, status %d\n", ep->ep.name, req, status);
 
         ep->stopped = 1;
+        spin_unlock(&udc->lock);
         req->req.complete(&ep->ep, &req->req);
+        spin_lock(&udc->lock);
         ep->stopped = stopped;
 
         /* ep0 is always ready; other endpoints need a non-empty queue */
@@ -472,7 +476,7 @@ static int at91_ep_enable(struct usb_ep *_ep,
                                 const struct usb_endpoint_descriptor *desc)
 {
         struct at91_ep  *ep = container_of(_ep, struct at91_ep, ep);
-        struct at91_udc *dev = ep->udc;
+        struct at91_udc *udc = ep->udc;
         u16             maxpacket;
         u32             tmp;
         unsigned long   flags;
@@ -487,7 +491,7 @@ static int at91_ep_enable(struct usb_ep *_ep,
                 return -EINVAL;
         }
 
-        if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN) {
+        if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN) {
                 DBG("bogus device state\n");
                 return -ESHUTDOWN;
         }
@@ -521,7 +525,7 @@ bogus_max:
         }
 
 ok:
-        local_irq_save(flags);
+        spin_lock_irqsave(&udc->lock, flags);
 
         /* initialize endpoint to match this descriptor */
         ep->is_in = usb_endpoint_dir_in(desc);
@@ -540,10 +544,10 @@ ok:
          * reset/init endpoint fifo.  NOTE:  leaves fifo_bank alone,
          * since endpoint resets don't reset hw pingpong state.
          */
-        at91_udp_write(dev, AT91_UDP_RST_EP, ep->int_mask);
-        at91_udp_write(dev, AT91_UDP_RST_EP, 0);
+        at91_udp_write(udc, AT91_UDP_RST_EP, ep->int_mask);
+        at91_udp_write(udc, AT91_UDP_RST_EP, 0);
 
-        local_irq_restore(flags);
+        spin_unlock_irqrestore(&udc->lock, flags);
         return 0;
 }
 
@@ -556,7 +560,7 @@ static int at91_ep_disable (struct usb_ep * _ep)
         if (ep == &ep->udc->ep[0])
                 return -EINVAL;
 
-        local_irq_save(flags);
+        spin_lock_irqsave(&udc->lock, flags);
 
         nuke(ep, -ESHUTDOWN);
 
@@ -571,7 +575,7 @@ static int at91_ep_disable (struct usb_ep * _ep)
                 __raw_writel(0, ep->creg);
         }
 
-        local_irq_restore(flags);
+        spin_unlock_irqrestore(&udc->lock, flags);
         return 0;
 }
 
@@ -607,7 +611,7 @@ static int at91_ep_queue(struct usb_ep *_ep,
 {
         struct at91_request     *req;
         struct at91_ep          *ep;
-        struct at91_udc         *dev;
+        struct at91_udc         *udc;
         int                     status;
         unsigned long           flags;
 
@@ -625,9 +629,9 @@ static int at91_ep_queue(struct usb_ep *_ep,
                 return -EINVAL;
         }
 
-        dev = ep->udc;
+        udc = ep->udc;
 
-        if (!dev || !dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN) {
+        if (!udc || !udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN) {
                 DBG("invalid device\n");
                 return -EINVAL;
         }
@@ -635,7 +639,7 @@ static int at91_ep_queue(struct usb_ep *_ep,
         _req->status = -EINPROGRESS;
         _req->actual = 0;
 
-        local_irq_save(flags);
+        spin_lock_irqsave(&udc->lock, flags);
 
         /* try to kickstart any empty and idle queue */
         if (list_empty(&ep->queue) && !ep->stopped) {
@@ -653,7 +657,7 @@ static int at91_ep_queue(struct usb_ep *_ep,
                 if (is_ep0) {
                         u32     tmp;
 
-                        if (!dev->req_pending) {
+                        if (!udc->req_pending) {
                                 status = -EINVAL;
                                 goto done;
                         }
@@ -662,11 +666,11 @@ static int at91_ep_queue(struct usb_ep *_ep,
                          * defer changing CONFG until after the gadget driver
                          * reconfigures the endpoints.
                          */
-                        if (dev->wait_for_config_ack) {
-                                tmp = at91_udp_read(dev, AT91_UDP_GLB_STAT);
+                        if (udc->wait_for_config_ack) {
+                                tmp = at91_udp_read(udc, AT91_UDP_GLB_STAT);
                                 tmp ^= AT91_UDP_CONFG;
                                 VDBG("toggle config\n");
-                                at91_udp_write(dev, AT91_UDP_GLB_STAT, tmp);
+                                at91_udp_write(udc, AT91_UDP_GLB_STAT, tmp);
                         }
                         if (req->req.length == 0) {
 ep0_in_status:
@@ -676,7 +680,7 @@ ep0_in_status:
                                 tmp &= ~SET_FX;
                                 tmp |= CLR_FX | AT91_UDP_TXPKTRDY;
                                 __raw_writel(tmp, ep->creg);
-                                dev->req_pending = 0;
+                                udc->req_pending = 0;
                                 goto done;
                         }
                 }
@@ -695,31 +699,40 @@ ep0_in_status:
 
         if (req && !status) {
                 list_add_tail (&req->queue, &ep->queue);
-                at91_udp_write(dev, AT91_UDP_IER, ep->int_mask);
+                at91_udp_write(udc, AT91_UDP_IER, ep->int_mask);
         }
 done:
-        local_irq_restore(flags);
+        spin_unlock_irqrestore(&udc->lock, flags);
         return (status < 0) ? status : 0;
 }
 
 static int at91_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
 {
-        struct at91_ep  *ep;
+        struct at91_ep          *ep;
         struct at91_request     *req;
+        unsigned long           flags;
+        struct at91_udc         *udc;
 
         ep = container_of(_ep, struct at91_ep, ep);
         if (!_ep || ep->ep.name == ep0name)
                 return -EINVAL;
 
+        udc = ep->udc;
+
+        spin_lock_irqsave(&udc->lock, flags);
+
         /* make sure it's actually queued on this endpoint */
         list_for_each_entry (req, &ep->queue, queue) {
                 if (&req->req == _req)
                         break;
         }
-        if (&req->req != _req)
+        if (&req->req != _req) {
+                spin_unlock_irqrestore(&udc->lock, flags);
                 return -EINVAL;
+        }
 
         done(ep, req, -ECONNRESET);
+        spin_unlock_irqrestore(&udc->lock, flags);
         return 0;
 }
 
@@ -736,7 +749,7 @@ static int at91_ep_set_halt(struct usb_ep *_ep, int value)
                 return -EINVAL;
 
         creg = ep->creg;
-        local_irq_save(flags);
+        spin_lock_irqsave(&udc->lock, flags);
 
         csr = __raw_readl(creg);
 
@@ -761,7 +774,7 @@ static int at91_ep_set_halt(struct usb_ep *_ep, int value)
                 __raw_writel(csr, creg);
         }
 
-        local_irq_restore(flags);
+        spin_unlock_irqrestore(&udc->lock, flags);
         return status;
 }
 
@@ -795,7 +808,7 @@ static int at91_wakeup(struct usb_gadget *gadget)
         unsigned long   flags;
 
         DBG("%s\n", __func__ );
-        local_irq_save(flags);
+        spin_lock_irqsave(&udc->lock, flags);
 
         if (!udc->clocked || !udc->suspended)
                 goto done;
@@ -809,7 +822,7 @@ static int at91_wakeup(struct usb_gadget *gadget)
         at91_udp_write(udc, AT91_UDP_GLB_STAT, glbstate);
 
 done:
-        local_irq_restore(flags);
+        spin_unlock_irqrestore(&udc->lock, flags);
         return status;
 }
 
@@ -851,8 +864,11 @@ static void stop_activity(struct at91_udc *udc)
                 ep->stopped = 1;
                 nuke(ep, -ESHUTDOWN);
         }
-        if (driver)
+        if (driver) {
+                spin_unlock(&udc->lock);
                 driver->disconnect(&udc->gadget);
+                spin_lock(&udc->lock);
+        }
 
         udc_reinit(udc);
 }
@@ -935,13 +951,13 @@ static int at91_vbus_session(struct usb_gadget *gadget, int is_active)
         unsigned long   flags;
 
         // VDBG("vbus %s\n", is_active ? "on" : "off");
-        local_irq_save(flags);
+        spin_lock_irqsave(&udc->lock, flags);
         udc->vbus = (is_active != 0);
         if (udc->driver)
                 pullup(udc, is_active);
         else
                 pullup(udc, 0);
-        local_irq_restore(flags);
+        spin_unlock_irqrestore(&udc->lock, flags);
         return 0;
 }
 
@@ -950,10 +966,10 @@ static int at91_pullup(struct usb_gadget *gadget, int is_on)
         struct at91_udc *udc = to_udc(gadget);
         unsigned long   flags;
 
-        local_irq_save(flags);
+        spin_lock_irqsave(&udc->lock, flags);
         udc->enabled = is_on = !!is_on;
         pullup(udc, is_on);
-        local_irq_restore(flags);
+        spin_unlock_irqrestore(&udc->lock, flags);
         return 0;
 }
 
@@ -962,9 +978,9 @@ static int at91_set_selfpowered(struct usb_gadget *gadget, int is_on)
         struct at91_udc *udc = to_udc(gadget);
         unsigned long   flags;
 
-        local_irq_save(flags);
+        spin_lock_irqsave(&udc->lock, flags);
         udc->selfpowered = (is_on != 0);
-        local_irq_restore(flags);
+        spin_unlock_irqrestore(&udc->lock, flags);
         return 0;
 }
 
@@ -1226,8 +1242,11 @@ static void handle_setup(struct at91_udc *udc, struct at91_ep *ep, u32 csr)
 #undef w_length
 
         /* pass request up to the gadget driver */
-        if (udc->driver)
+        if (udc->driver) {
+                spin_unlock(&udc->lock);
                 status = udc->driver->setup(&udc->gadget, &pkt.r);
+                spin_lock(&udc->lock);
+        }
         else
                 status = -ENODEV;
         if (status < 0) {
@@ -1378,6 +1397,9 @@ static irqreturn_t at91_udc_irq (int irq, void *_udc)
         struct at91_udc         *udc = _udc;
         u32                     rescans = 5;
         int                     disable_clock = 0;
+        unsigned long           flags;
+
+        spin_lock_irqsave(&udc->lock, flags);
 
         if (!udc->clocked) {
                 clk_on(udc);
@@ -1433,8 +1455,11 @@ static irqreturn_t at91_udc_irq (int irq, void *_udc)
                          * and then into standby to avoid drawing more than
                          * 500uA power (2500uA for some high-power configs).
                          */
-                        if (udc->driver && udc->driver->suspend)
+                        if (udc->driver && udc->driver->suspend) {
+                                spin_unlock(&udc->lock);
                                 udc->driver->suspend(&udc->gadget);
+                                spin_lock(&udc->lock);
+                        }
 
                 /* host initiated resume */
                 } else if (status & AT91_UDP_RXRSM) {
@@ -1451,8 +1476,11 @@ static irqreturn_t at91_udc_irq (int irq, void *_udc)
                          * would normally want to switch out of slow clock
                          * mode into normal mode.
                          */
-                        if (udc->driver && udc->driver->resume)
+                        if (udc->driver && udc->driver->resume) {
+                                spin_unlock(&udc->lock);
                                 udc->driver->resume(&udc->gadget);
+                                spin_lock(&udc->lock);
+                        }
 
                 /* endpoint IRQs are cleared by handling them */
                 } else {
@@ -1474,6 +1502,8 @@ static irqreturn_t at91_udc_irq (int irq, void *_udc)
         if (disable_clock)
                 clk_off(udc);
 
+        spin_unlock_irqrestore(&udc->lock, flags);
+
         return IRQ_HANDLED;
 }
 
@@ -1556,24 +1586,53 @@ static struct at91_udc controller = {
         /* ep6 and ep7 are also reserved (custom silicon might use them) */
 };
 
+static void at91_vbus_update(struct at91_udc *udc, unsigned value)
+{
+        value ^= udc->board.vbus_active_low;
+        if (value != udc->vbus)
+                at91_vbus_session(&udc->gadget, value);
+}
+
 static irqreturn_t at91_vbus_irq(int irq, void *_udc)
 {
         struct at91_udc *udc = _udc;
-        unsigned        value;
 
         /* vbus needs at least brief debouncing */
         udelay(10);
-        value = gpio_get_value(udc->board.vbus_pin);
-        if (value != udc->vbus)
-                at91_vbus_session(&udc->gadget, value);
+        at91_vbus_update(udc, gpio_get_value(udc->board.vbus_pin));
 
         return IRQ_HANDLED;
 }
 
+static void at91_vbus_timer_work(struct work_struct *work)
+{
+        struct at91_udc *udc = container_of(work, struct at91_udc,
+                                            vbus_timer_work);
+
+        at91_vbus_update(udc, gpio_get_value_cansleep(udc->board.vbus_pin));
+
+        if (!timer_pending(&udc->vbus_timer))
+                mod_timer(&udc->vbus_timer, jiffies + VBUS_POLL_TIMEOUT);
+}
+
+static void at91_vbus_timer(unsigned long data)
+{
+        struct at91_udc *udc = (struct at91_udc *)data;
+
+        /*
+         * If we are polling vbus it is likely that the gpio is on an
+         * bus such as i2c or spi which may sleep, so schedule some work
+         * to read the vbus gpio
+         */
+        if (!work_pending(&udc->vbus_timer_work))
+                schedule_work(&udc->vbus_timer_work);
+}
+
 int usb_gadget_register_driver (struct usb_gadget_driver *driver)
 {
         struct at91_udc *udc = &controller;
         int             retval;
+        unsigned long   flags;
 
         if (!driver
                         || driver->speed < USB_SPEED_FULL
@@ -1605,9 +1664,9 @@ int usb_gadget_register_driver (struct usb_gadget_driver *driver)
                 return retval;
         }
 
-        local_irq_disable();
+        spin_lock_irqsave(&udc->lock, flags);
         pullup(udc, 1);
-        local_irq_enable();
+        spin_unlock_irqrestore(&udc->lock, flags);
 
         DBG("bound to %s\n", driver->driver.name);
         return 0;
@@ -1617,15 +1676,16 @@ EXPORT_SYMBOL (usb_gadget_register_driver);
 int usb_gadget_unregister_driver (struct usb_gadget_driver *driver)
 {
         struct at91_udc *udc = &controller;
+        unsigned long   flags;
 
         if (!driver || driver != udc->driver || !driver->unbind)
                 return -EINVAL;
 
-        local_irq_disable();
+        spin_lock_irqsave(&udc->lock, flags);
         udc->enabled = 0;
         at91_udp_write(udc, AT91_UDP_IDR, ~0);
         pullup(udc, 0);
-        local_irq_enable();
+        spin_unlock_irqrestore(&udc->lock, flags);
 
         driver->unbind(&udc->gadget);
         udc->gadget.dev.driver = NULL;
@@ -1641,8 +1701,13 @@ EXPORT_SYMBOL (usb_gadget_unregister_driver);
 
 static void at91udc_shutdown(struct platform_device *dev)
 {
+        struct at91_udc *udc = platform_get_drvdata(dev);
+        unsigned long   flags;
+
         /* force disconnect on reboot */
+        spin_lock_irqsave(&udc->lock, flags);
         pullup(platform_get_drvdata(dev), 0);
+        spin_unlock_irqrestore(&udc->lock, flags);
 }
 
 static int __init at91udc_probe(struct platform_device *pdev)
@@ -1683,6 +1748,7 @@ static int __init at91udc_probe(struct platform_device *pdev)
         udc->board = *(struct at91_udc_data *) dev->platform_data;
         udc->pdev = pdev;
         udc->enabled = 0;
+        spin_lock_init(&udc->lock);
 
         /* rm9200 needs manual D+ pullup; off by default */
         if (cpu_is_at91rm9200()) {
@@ -1763,13 +1829,23 @@ static int __init at91udc_probe(struct platform_device *pdev)
                  * Get the initial state of VBUS - we cannot expect
                  * a pending interrupt.
                  */
-                udc->vbus = gpio_get_value(udc->board.vbus_pin);
-                if (request_irq(udc->board.vbus_pin, at91_vbus_irq,
-                                IRQF_DISABLED, driver_name, udc)) {
-                        DBG("request vbus irq %d failed\n",
-                                        udc->board.vbus_pin);
-                        retval = -EBUSY;
-                        goto fail3;
+                udc->vbus = gpio_get_value_cansleep(udc->board.vbus_pin) ^
+                        udc->board.vbus_active_low;
+
+                if (udc->board.vbus_polled) {
+                        INIT_WORK(&udc->vbus_timer_work, at91_vbus_timer_work);
+                        setup_timer(&udc->vbus_timer, at91_vbus_timer,
+                                    (unsigned long)udc);
+                        mod_timer(&udc->vbus_timer,
+                                  jiffies + VBUS_POLL_TIMEOUT);
+                } else {
+                        if (request_irq(udc->board.vbus_pin, at91_vbus_irq,
+                                        IRQF_DISABLED, driver_name, udc)) {
+                                DBG("request vbus irq %d failed\n",
+                                    udc->board.vbus_pin);
+                                retval = -EBUSY;
+                                goto fail3;
+                        }
                 }
         } else {
                 DBG("no VBUS detection, assuming always-on\n");
@@ -1804,13 +1880,16 @@ static int __exit at91udc_remove(struct platform_device *pdev)
 {
         struct at91_udc *udc = platform_get_drvdata(pdev);
         struct resource *res;
+        unsigned long   flags;
 
         DBG("remove\n");
 
         if (udc->driver)
                 return -EBUSY;
 
+        spin_lock_irqsave(&udc->lock, flags);
         pullup(udc, 0);
+        spin_unlock_irqrestore(&udc->lock, flags);
 
         device_init_wakeup(&pdev->dev, 0);
         remove_debug_file(udc);
@@ -1840,6 +1919,7 @@ static int at91udc_suspend(struct platform_device *pdev, pm_message_t mesg)
 {
         struct at91_udc *udc = platform_get_drvdata(pdev);
         int             wake = udc->driver && device_may_wakeup(&pdev->dev);
+        unsigned long   flags;
 
         /* Unless we can act normally to the host (letting it wake us up
          * whenever it has work for us) force disconnect.  Wakeup requires
@@ -1849,13 +1929,15 @@ static int at91udc_suspend(struct platform_device *pdev, pm_message_t mesg)
         if ((!udc->suspended && udc->addr)
                         || !wake
                         || at91_suspend_entering_slow_clock()) {
+                spin_lock_irqsave(&udc->lock, flags);
                 pullup(udc, 0);
                 wake = 0;
+                spin_unlock_irqrestore(&udc->lock, flags);
         } else
                 enable_irq_wake(udc->udp_irq);
 
         udc->active_suspend = wake;
-        if (udc->board.vbus_pin > 0 && wake)
+        if (udc->board.vbus_pin > 0 && !udc->board.vbus_polled && wake)
                 enable_irq_wake(udc->board.vbus_pin);
         return 0;
 }
@@ -1863,15 +1945,20 @@ static int at91udc_suspend(struct platform_device *pdev, pm_message_t mesg)
 static int at91udc_resume(struct platform_device *pdev)
 {
         struct at91_udc *udc = platform_get_drvdata(pdev);
+        unsigned long   flags;
 
-        if (udc->board.vbus_pin > 0 && udc->active_suspend)
+        if (udc->board.vbus_pin > 0 && !udc->board.vbus_polled &&
+            udc->active_suspend)
                 disable_irq_wake(udc->board.vbus_pin);
 
         /* maybe reconnect to host; if so, clocks on */
         if (udc->active_suspend)
                 disable_irq_wake(udc->udp_irq);
-        else
+        else {
+                spin_lock_irqsave(&udc->lock, flags);
                 pullup(udc, 1);
+                spin_unlock_irqrestore(&udc->lock, flags);
+        }
         return 0;
 }
 #else
diff --git a/drivers/usb/gadget/at91_udc.h b/drivers/usb/gadget/at91_udc.h
index c65d62295890..108ca54f9092 100644
--- a/drivers/usb/gadget/at91_udc.h
+++ b/drivers/usb/gadget/at91_udc.h
@@ -144,6 +144,9 @@ struct at91_udc {
         struct proc_dir_entry           *pde;
         void __iomem                    *udp_baseaddr;
         int                             udp_irq;
+        spinlock_t                      lock;
+        struct timer_list               vbus_timer;
+        struct work_struct              vbus_timer_work;
 };
 
 static inline struct at91_udc *to_udc(struct usb_gadget *g)
diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c
index 85b0d8921eae..980762453a9c 100644
--- a/drivers/usb/gadget/pxa27x_udc.c
+++ b/drivers/usb/gadget/pxa27x_udc.c
@@ -2561,7 +2561,7 @@ static void pxa_udc_shutdown(struct platform_device *_dev)
                 udc_disable(udc);
 }
 
-#ifdef CONFIG_CPU_PXA27x
+#ifdef CONFIG_PXA27x
 extern void pxa27x_clear_otgph(void);
 #else
 #define pxa27x_clear_otgph()   do {} while (0)
diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c
index e724a051bfdd..ea2b3c7ebee5 100644
--- a/drivers/usb/gadget/s3c2410_udc.c
+++ b/drivers/usb/gadget/s3c2410_udc.c
@@ -735,6 +735,10 @@ static void s3c2410_udc_handle_ep0_idle(struct s3c2410_udc *dev,
         else
                 dev->ep0state = EP0_OUT_DATA_PHASE;
 
+        if (!dev->driver)
+                return;
+
+        /* deliver the request to the gadget driver */
         ret = dev->driver->setup(&dev->gadget, crq);
         if (ret < 0) {
                 if (dev->req_config) {
diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c
index a18debdd79b8..418163894775 100644
--- a/drivers/usb/host/ohci-pxa27x.c
+++ b/drivers/usb/host/ohci-pxa27x.c
@@ -203,7 +203,7 @@ static inline void pxa27x_reset_hc(struct pxa27x_ohci *ohci)
         __raw_writel(uhchr & ~UHCHR_FHR, ohci->mmio_base + UHCHR);
 }
 
-#ifdef CONFIG_CPU_PXA27x
+#ifdef CONFIG_PXA27x
 extern void pxa27x_clear_otgph(void);
 #else
 #define pxa27x_clear_otgph()    do {} while (0)
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index fd9e03afd91c..2eb658d26394 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -835,6 +835,27 @@ fail:
         return 0;
 }
 
+void xhci_copy_ep0_dequeue_into_input_ctx(struct xhci_hcd *xhci,
+                struct usb_device *udev)
+{
+        struct xhci_virt_device *virt_dev;
+        struct xhci_ep_ctx      *ep0_ctx;
+        struct xhci_ring        *ep_ring;
+
+        virt_dev = xhci->devs[udev->slot_id];
+        ep0_ctx = xhci_get_ep_ctx(xhci, virt_dev->in_ctx, 0);
+        ep_ring = virt_dev->eps[0].ring;
+        /*
+         * FIXME we don't keep track of the dequeue pointer very well after a
+         * Set TR dequeue pointer, so we're setting the dequeue pointer of the
+         * host to our enqueue pointer.  This should only be called after a
+         * configured device has reset, so all control transfers should have
+         * been completed or cancelled before the reset.
+         */
+        ep0_ctx->deq = xhci_trb_virt_to_dma(ep_ring->enq_seg, ep_ring->enqueue);
+        ep0_ctx->deq |= ep_ring->cycle_state;
+}
+
 /* Setup an xHCI virtual device for a Set Address command */
 int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *udev)
 {
@@ -1002,7 +1023,7 @@ static inline unsigned int xhci_get_endpoint_interval(struct usb_device *udev,
         return EP_INTERVAL(interval);
 }
 
-/* The "Mult" field in the endpoint context is only set for SuperSpeed devices.
+/* The "Mult" field in the endpoint context is only set for SuperSpeed isoc eps.
  * High speed endpoint descriptors can define "the number of additional
  * transaction opportunities per microframe", but that goes in the Max Burst
  * endpoint context field.
@@ -1010,7 +1031,8 @@ static inline unsigned int xhci_get_endpoint_interval(struct usb_device *udev,
 static inline u32 xhci_get_endpoint_mult(struct usb_device *udev,
                 struct usb_host_endpoint *ep)
 {
-        if (udev->speed != USB_SPEED_SUPER)
+        if (udev->speed != USB_SPEED_SUPER ||
+                        !usb_endpoint_xfer_isoc(&ep->desc))
                 return 0;
         return ep->ss_ep_comp.bmAttributes;
 }
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 94e6934edb09..bfc99a939455 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -2380,16 +2380,19 @@ static int queue_command(struct xhci_hcd *xhci, u32 field1, u32 field2,
                 u32 field3, u32 field4, bool command_must_succeed)
 {
         int reserved_trbs = xhci->cmd_ring_reserved_trbs;
+        int ret;
+
         if (!command_must_succeed)
                 reserved_trbs++;
 
-        if (!room_on_ring(xhci, xhci->cmd_ring, reserved_trbs)) {
-                if (!in_interrupt())
-                        xhci_err(xhci, "ERR: No room for command on command ring\n");
+        ret = prepare_ring(xhci, xhci->cmd_ring, EP_STATE_RUNNING,
+                        reserved_trbs, GFP_ATOMIC);
+        if (ret < 0) {
+                xhci_err(xhci, "ERR: No room for command on command ring\n");
                 if (command_must_succeed)
                         xhci_err(xhci, "ERR: Reserved TRB counting for "
                                         "unfailable commands failed.\n");
-                return -ENOMEM;
+                return ret;
         }
         queue_trb(xhci, xhci->cmd_ring, false, false, field1, field2, field3,
                         field4 | xhci->cmd_ring->cycle_state);
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 27345cd04da0..3998f72cd0c4 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -2134,6 +2134,8 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev)
         /* If this is a Set Address to an unconfigured device, setup ep 0 */
         if (!udev->config)
                 xhci_setup_addressable_virt_dev(xhci, udev);
+        else
+                xhci_copy_ep0_dequeue_into_input_ctx(xhci, udev);
         /* Otherwise, assume the core has the device configured how it wants */
         xhci_dbg(xhci, "Slot ID %d Input Context:\n", udev->slot_id);
         xhci_dbg_ctx(xhci, virt_dev->in_ctx, 2);
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 8b4b7d39f79c..6c7e3430ec93 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1292,6 +1292,8 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags);
 void xhci_free_virt_device(struct xhci_hcd *xhci, int slot_id);
 int xhci_alloc_virt_device(struct xhci_hcd *xhci, int slot_id, struct usb_device *udev, gfp_t flags);
 int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *udev);
+void xhci_copy_ep0_dequeue_into_input_ctx(struct xhci_hcd *xhci,
+                struct usb_device *udev);
 unsigned int xhci_get_endpoint_index(struct usb_endpoint_descriptor *desc);
 unsigned int xhci_get_endpoint_flag(struct usb_endpoint_descriptor *desc);
 unsigned int xhci_get_endpoint_flag_from_index(unsigned int ep_index);
diff --git a/drivers/usb/misc/sisusbvga/sisusb.c b/drivers/usb/misc/sisusbvga/sisusb.c
index 30d930386b65..d25814c172b2 100644
--- a/drivers/usb/misc/sisusbvga/sisusb.c
+++ b/drivers/usb/misc/sisusbvga/sisusb.c
@@ -2436,7 +2436,8 @@ sisusb_open(struct inode *inode, struct file *file)
         }
 
         if (!sisusb->devinit) {
-                if (sisusb->sisusb_dev->speed == USB_SPEED_HIGH) {
+                if (sisusb->sisusb_dev->speed == USB_SPEED_HIGH ||
+                    sisusb->sisusb_dev->speed == USB_SPEED_SUPER) {
                         if (sisusb_init_gfxdevice(sisusb, 0)) {
                                 mutex_unlock(&sisusb->lock);
                                 dev_err(&sisusb->sisusb_dev->dev, "Failed to initialize device\n");
@@ -3166,7 +3167,7 @@ static int sisusb_probe(struct usb_interface *intf,
 
         sisusb->present = 1;
 
-        if (dev->speed == USB_SPEED_HIGH) {
+        if (dev->speed == USB_SPEED_HIGH || dev->speed == USB_SPEED_SUPER) {
                 int initscreen = 1;
 #ifdef INCL_SISUSB_CON
                 if (sisusb_first_vc > 0 &&
diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c
index 05c077f8f9ac..3c48e77a0aa2 100644
--- a/drivers/usb/musb/tusb6010.c
+++ b/drivers/usb/musb/tusb6010.c
@@ -29,19 +29,6 @@ static void tusb_source_power(struct musb *musb, int is_on);
 #define TUSB_REV_MAJOR(reg_val)         ((reg_val >> 4) & 0xf)
 #define TUSB_REV_MINOR(reg_val)         (reg_val & 0xf)
 
-#ifdef CONFIG_PM
-/* REVISIT: These should be only needed if somebody implements off idle */
-void musb_platform_save_context(struct musb *musb,
-                        struct musb_context_registers *musb_context)
-{
-}
-
-void musb_platform_restore_context(struct musb *musb,
-                        struct musb_context_registers *musb_context)
-{
-}
-#endif
-
 /*
  * Checks the revision. We need to use the DMA register as 3.0 does not
  * have correct versions for TUSB_PRCM_REV or TUSB_INT_CTRL_REV.
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index da7e334b0407..e298dc4baed7 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -691,6 +691,7 @@ static struct usb_device_id id_table_combined [] = {
         { USB_DEVICE(FTDI_VID, FTDI_NDI_AURORA_SCU_PID),
                 .driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk },
         { USB_DEVICE(TELLDUS_VID, TELLDUS_TELLSTICK_PID) },
+        { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_SERIAL_VX7_PID) },
         { USB_DEVICE(FTDI_VID, FTDI_MAXSTREAM_PID) },
         { USB_DEVICE(FTDI_VID, FTDI_PHI_FISCO_PID) },
         { USB_DEVICE(TML_VID, TML_USB_SERIAL_PID) },
@@ -737,6 +738,14 @@ static struct usb_device_id id_table_combined [] = {
         { USB_DEVICE(FTDI_VID, MJSG_SR_RADIO_PID) },
         { USB_DEVICE(FTDI_VID, MJSG_HD_RADIO_PID) },
         { USB_DEVICE(FTDI_VID, MJSG_XM_RADIO_PID) },
+        { USB_DEVICE(FTDI_VID, XVERVE_SIGNALYZER_ST_PID),
+                .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+        { USB_DEVICE(FTDI_VID, XVERVE_SIGNALYZER_SLITE_PID),
+                .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+        { USB_DEVICE(FTDI_VID, XVERVE_SIGNALYZER_SH2_PID),
+                .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+        { USB_DEVICE(FTDI_VID, XVERVE_SIGNALYZER_SH4_PID),
+                .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
         { },                                    /* Optional parameter entry */
         { }                                     /* Terminating entry */
 };
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index bbc159a1df45..d01946db8fac 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -696,6 +696,12 @@
 #define TELLDUS_TELLSTICK_PID           0x0C30  /* RF control dongle 433 MHz using FT232RL */
 
 /*
+ * RT Systems programming cables for various ham radios
+ */
+#define RTSYSTEMS_VID                   0x2100  /* Vendor ID */
+#define RTSYSTEMS_SERIAL_VX7_PID        0x9e52  /* Serial converter for VX-7 Radios using FT232RL */
+
+/*
  * Bayer Ascensia Contour blood glucose meter USB-converter cable.
  * http://winglucofacts.com/cables/
  */
@@ -1017,3 +1023,12 @@
 #define MJSG_SR_RADIO_PID       0x9379
 #define MJSG_XM_RADIO_PID       0x937A
 #define MJSG_HD_RADIO_PID       0x937C
+
+/*
+ * Xverve Signalyzer tools (http://www.signalyzer.com/)
+ */
+#define XVERVE_SIGNALYZER_ST_PID        0xBCA0
+#define XVERVE_SIGNALYZER_SLITE_PID     0xBCA1
+#define XVERVE_SIGNALYZER_SH2_PID       0xBCA2
+#define XVERVE_SIGNALYZER_SH4_PID       0xBCA4
+
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index e280ad8e12f7..5cd30e4345c6 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -206,6 +206,7 @@ static void option_instat_callback(struct urb *urb);
 #define AMOI_PRODUCT_H01                        0x0800
 #define AMOI_PRODUCT_H01A                       0x7002
 #define AMOI_PRODUCT_H02                        0x0802
+#define AMOI_PRODUCT_SKYPEPHONE_S2              0x0407
 
 #define DELL_VENDOR_ID                          0x413C
 
@@ -302,6 +303,7 @@ static void option_instat_callback(struct urb *urb);
 #define QISDA_PRODUCT_H21_4512                  0x4512
 #define QISDA_PRODUCT_H21_4523                  0x4523
 #define QISDA_PRODUCT_H20_4515                  0x4515
+#define QISDA_PRODUCT_H20_4518                  0x4518
 #define QISDA_PRODUCT_H20_4519                  0x4519
 
 /* TLAYTECH PRODUCTS */
@@ -516,6 +518,7 @@ static const struct usb_device_id option_ids[] = {
         { USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H01) },
         { USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H01A) },
         { USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H02) },
+        { USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_SKYPEPHONE_S2) },
 
         { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5700_MINICARD) },             /* Dell Wireless 5700 Mobile Broadband CDMA/EVDO Mini-Card == Novatel Expedite EV620 CDMA/EV-DO */
         { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5500_MINICARD) },             /* Dell Wireless 5500 Mobile Broadband HSDPA Mini-Card == Novatel Expedite EU740 HSDPA/3G */
@@ -852,6 +855,7 @@ static const struct usb_device_id option_ids[] = {
         { USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H21_4512) },
         { USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H21_4523) },
         { USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H20_4515) },
+        { USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H20_4518) },
         { USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H20_4519) },
         { USB_DEVICE(TOSHIBA_VENDOR_ID, TOSHIBA_PRODUCT_G450) },
         { USB_DEVICE(TOSHIBA_VENDOR_ID, TOSHIBA_PRODUCT_HSDPA_MINICARD ) }, /* Toshiba 3G HSDPA == Novatel Expedite EU870D MiniCard */
diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c
index 93d72eb8cafc..cde67cacb2c3 100644
--- a/drivers/usb/serial/qcserial.c
+++ b/drivers/usb/serial/qcserial.c
@@ -51,6 +51,8 @@ static const struct usb_device_id id_table[] = {
         {USB_DEVICE(0x1f45, 0x0001)},   /* Unknown Gobi QDL device */
         {USB_DEVICE(0x413c, 0x8185)},   /* Dell Gobi 2000 QDL device (N0218, VU936) */
         {USB_DEVICE(0x413c, 0x8186)},   /* Dell Gobi 2000 Modem device (N0218, VU936) */
+        {USB_DEVICE(0x05c6, 0x9208)},   /* Generic Gobi 2000 QDL device */
+        {USB_DEVICE(0x05c6, 0x920b)},   /* Generic Gobi 2000 Modem device */
         {USB_DEVICE(0x05c6, 0x9224)},   /* Sony Gobi 2000 QDL device (N0279, VU730) */
         {USB_DEVICE(0x05c6, 0x9225)},   /* Sony Gobi 2000 Modem device (N0279, VU730) */
         {USB_DEVICE(0x05c6, 0x9244)},   /* Samsung Gobi 2000 QDL device (VL176) */
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index ef0bdb08d788..d47b56e9e8ce 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -245,6 +245,7 @@ static const struct usb_device_id id_table[] = {
         { USB_DEVICE(0x1199, 0x0021) }, /* Sierra Wireless AirCard 597E */
         { USB_DEVICE(0x1199, 0x0112) }, /* Sierra Wireless AirCard 580 */
         { USB_DEVICE(0x1199, 0x0120) }, /* Sierra Wireless USB Dongle 595U */
+        { USB_DEVICE(0x1199, 0x0301) }, /* Sierra Wireless USB Dongle 250U */
         /* Sierra Wireless C597 */
         { USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x0023, 0xFF, 0xFF, 0xFF) },
         /* Sierra Wireless T598 */
diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c
index 44716427c51c..64ec073e89de 100644
--- a/drivers/usb/storage/transport.c
+++ b/drivers/usb/storage/transport.c
@@ -139,9 +139,7 @@ static int usb_stor_msg_common(struct us_data *us, int timeout)
 
         /* fill the common fields in the URB */
         us->current_urb->context = &urb_done;
-        us->current_urb->actual_length = 0;
-        us->current_urb->error_count = 0;
-        us->current_urb->status = 0;
+        us->current_urb->transfer_flags = 0;
 
         /* we assume that if transfer_buffer isn't us->iobuf then it
          * hasn't been mapped for DMA.  Yes, this is clunky, but it's