252 files changed, 3061 insertions, 9987 deletions

diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index 4c90b510d016..640ae6c6d2d2 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -37,6 +37,7 @@ config USB_ARCH_HAS_EHCI
         default y if ARCH_W90X900
         default y if ARCH_AT91
         default y if ARCH_MXC
+        default y if ARCH_MXS
         default y if ARCH_OMAP3
         default y if ARCH_CNS3XXX
         default y if ARCH_VT8500
diff --git a/drivers/usb/c67x00/c67x00-drv.c b/drivers/usb/c67x00/c67x00-drv.c
index 6f3b6e267398..fe815ecd557e 100644
--- a/drivers/usb/c67x00/c67x00-drv.c
+++ b/drivers/usb/c67x00/c67x00-drv.c
@@ -116,7 +116,7 @@ static irqreturn_t c67x00_irq(int irq, void *__dev)
 
 /* ------------------------------------------------------------------------- */
 
-static int __devinit c67x00_drv_probe(struct platform_device *pdev)
+static int c67x00_drv_probe(struct platform_device *pdev)
 {
         struct c67x00_device *c67x00;
         struct c67x00_platform_data *pdata;
@@ -191,7 +191,7 @@ static int __devinit c67x00_drv_probe(struct platform_device *pdev)
         return ret;
 }
 
-static int __devexit c67x00_drv_remove(struct platform_device *pdev)
+static int c67x00_drv_remove(struct platform_device *pdev)
 {
         struct c67x00_device *c67x00 = platform_get_drvdata(pdev);
         struct resource *res;
@@ -219,7 +219,7 @@ static int __devexit c67x00_drv_remove(struct platform_device *pdev)
 
 static struct platform_driver c67x00_driver = {
         .probe  = c67x00_drv_probe,
-        .remove = __devexit_p(c67x00_drv_remove),
+        .remove = c67x00_drv_remove,
         .driver = {
                 .owner = THIS_MODULE,
                 .name = "c67x00",
diff --git a/drivers/usb/chipidea/Kconfig b/drivers/usb/chipidea/Kconfig
index 1ea932a13685..608a2aeb400c 100644
--- a/drivers/usb/chipidea/Kconfig
+++ b/drivers/usb/chipidea/Kconfig
@@ -20,6 +20,7 @@ config USB_CHIPIDEA_UDC
 config USB_CHIPIDEA_HOST
         bool "ChipIdea host controller"
         depends on USB=y || USB=USB_CHIPIDEA
+        depends on USB_EHCI_HCD
         select USB_EHCI_ROOT_HUB_TT
         help
           Say Y here to enable host controller functionality of the
diff --git a/drivers/usb/chipidea/ci13xxx_imx.c b/drivers/usb/chipidea/ci13xxx_imx.c
index 0f5ca4bea17f..8c291220be7f 100644
--- a/drivers/usb/chipidea/ci13xxx_imx.c
+++ b/drivers/usb/chipidea/ci13xxx_imx.c
@@ -85,7 +85,7 @@ EXPORT_SYMBOL_GPL(usbmisc_get_init_data);
 
 /* End of common functions shared by usbmisc drivers*/
 
-static struct ci13xxx_platform_data ci13xxx_imx_platdata __devinitdata  = {
+static struct ci13xxx_platform_data ci13xxx_imx_platdata  = {
         .name                   = "ci13xxx_imx",
         .flags                  = CI13XXX_REQUIRE_TRANSCEIVER |
                                   CI13XXX_PULLUP_ON_VBUS |
@@ -93,7 +93,7 @@ static struct ci13xxx_platform_data ci13xxx_imx_platdata __devinitdata  = {
         .capoffset              = DEF_CAPOFFSET,
 };
 
-static int __devinit ci13xxx_imx_probe(struct platform_device *pdev)
+static int ci13xxx_imx_probe(struct platform_device *pdev)
 {
         struct ci13xxx_imx_data *data;
         struct platform_device *plat_ci, *phy_pdev;
@@ -220,7 +220,7 @@ put_np:
         return ret;
 }
 
-static int __devexit ci13xxx_imx_remove(struct platform_device *pdev)
+static int ci13xxx_imx_remove(struct platform_device *pdev)
 {
         struct ci13xxx_imx_data *data = platform_get_drvdata(pdev);
 
@@ -252,7 +252,7 @@ MODULE_DEVICE_TABLE(of, ci13xxx_imx_dt_ids);
 
 static struct platform_driver ci13xxx_imx_driver = {
         .probe = ci13xxx_imx_probe,
-        .remove = __devexit_p(ci13xxx_imx_remove),
+        .remove = ci13xxx_imx_remove,
         .driver = {
                 .name = "imx_usb",
                 .owner = THIS_MODULE,
diff --git a/drivers/usb/chipidea/ci13xxx_msm.c b/drivers/usb/chipidea/ci13xxx_msm.c
index b01feb3be92e..7d16681fd3d2 100644
--- a/drivers/usb/chipidea/ci13xxx_msm.c
+++ b/drivers/usb/chipidea/ci13xxx_msm.c
@@ -55,7 +55,7 @@ static struct ci13xxx_platform_data ci13xxx_msm_platdata = {
         .notify_event           = ci13xxx_msm_notify_event,
 };
 
-static int __devinit ci13xxx_msm_probe(struct platform_device *pdev)
+static int ci13xxx_msm_probe(struct platform_device *pdev)
 {
         struct platform_device *plat_ci;
 
@@ -77,7 +77,7 @@ static int __devinit ci13xxx_msm_probe(struct platform_device *pdev)
         return 0;
 }
 
-static int __devexit ci13xxx_msm_remove(struct platform_device *pdev)
+static int ci13xxx_msm_remove(struct platform_device *pdev)
 {
         struct platform_device *plat_ci = platform_get_drvdata(pdev);
 
@@ -89,7 +89,7 @@ static int __devexit ci13xxx_msm_remove(struct platform_device *pdev)
 
 static struct platform_driver ci13xxx_msm_driver = {
         .probe = ci13xxx_msm_probe,
-        .remove = __devexit_p(ci13xxx_msm_remove),
+        .remove = ci13xxx_msm_remove,
         .driver = { .name = "msm_hsusb", },
 };
 
diff --git a/drivers/usb/chipidea/ci13xxx_pci.c b/drivers/usb/chipidea/ci13xxx_pci.c
index 918e14971f2b..9b227e39299a 100644
--- a/drivers/usb/chipidea/ci13xxx_pci.c
+++ b/drivers/usb/chipidea/ci13xxx_pci.c
@@ -48,7 +48,7 @@ struct ci13xxx_platform_data penwell_pci_platdata = {
  * Allocates basic PCI resources for this USB device controller, and then
  * invokes the udc_probe() method to start the UDC associated with it
  */
-static int __devinit ci13xxx_pci_probe(struct pci_dev *pdev,
+static int ci13xxx_pci_probe(struct pci_dev *pdev,
                                        const struct pci_device_id *id)
 {
         struct ci13xxx_platform_data *platdata = (void *)id->driver_data;
@@ -107,7 +107,7 @@ static int __devinit ci13xxx_pci_probe(struct pci_dev *pdev,
  * first invoking the udc_remove() and then releases
  * all PCI resources allocated for this USB device controller
  */
-static void __devexit ci13xxx_pci_remove(struct pci_dev *pdev)
+static void ci13xxx_pci_remove(struct pci_dev *pdev)
 {
         struct platform_device *plat_ci = pci_get_drvdata(pdev);
 
@@ -147,7 +147,7 @@ static struct pci_driver ci13xxx_pci_driver = {
         .name         = UDC_DRIVER_NAME,
         .id_table     = ci13xxx_pci_id_table,
         .probe        = ci13xxx_pci_probe,
-        .remove       = __devexit_p(ci13xxx_pci_remove),
+        .remove       = ci13xxx_pci_remove,
 };
 
 module_pci_driver(ci13xxx_pci_driver);
diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
index f69d029b4607..aebf695a9344 100644
--- a/drivers/usb/chipidea/core.c
+++ b/drivers/usb/chipidea/core.c
@@ -385,12 +385,13 @@ EXPORT_SYMBOL_GPL(ci13xxx_add_device);
 
 void ci13xxx_remove_device(struct platform_device *pdev)
 {
+        int id = pdev->id;
         platform_device_unregister(pdev);
-        ida_simple_remove(&ci_ida, pdev->id);
+        ida_simple_remove(&ci_ida, id);
 }
 EXPORT_SYMBOL_GPL(ci13xxx_remove_device);
 
-static int __devinit ci_hdrc_probe(struct platform_device *pdev)
+static int ci_hdrc_probe(struct platform_device *pdev)
 {
         struct device   *dev = &pdev->dev;
         struct ci13xxx  *ci;
@@ -508,7 +509,7 @@ rm_wq:
         return ret;
 }
 
-static int __devexit ci_hdrc_remove(struct platform_device *pdev)
+static int ci_hdrc_remove(struct platform_device *pdev)
 {
         struct ci13xxx *ci = platform_get_drvdata(pdev);
 
@@ -523,7 +524,7 @@ static int __devexit ci_hdrc_remove(struct platform_device *pdev)
 
 static struct platform_driver ci_hdrc_driver = {
         .probe  = ci_hdrc_probe,
-        .remove = __devexit_p(ci_hdrc_remove),
+        .remove = ci_hdrc_remove,
         .driver = {
                 .name   = "ci_hdrc",
         },
diff --git a/drivers/usb/chipidea/debug.c b/drivers/usb/chipidea/debug.c
index c6f50a257565..3bc244d2636a 100644
--- a/drivers/usb/chipidea/debug.c
+++ b/drivers/usb/chipidea/debug.c
@@ -160,9 +160,6 @@ static ssize_t show_device(struct device *dev, struct device_attribute *attr,
                        gadget->speed);
         n += scnprintf(buf + n, PAGE_SIZE - n, "max_speed         = %d\n",
                        gadget->max_speed);
-        /* TODO: Scheduled for removal in 3.8. */
-        n += scnprintf(buf + n, PAGE_SIZE - n, "is_dualspeed      = %d\n",
-                       gadget_is_dualspeed(gadget));
         n += scnprintf(buf + n, PAGE_SIZE - n, "is_otg            = %d\n",
                        gadget->is_otg);
         n += scnprintf(buf + n, PAGE_SIZE - n, "is_a_peripheral   = %d\n",
diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c
index ebff9f4f56ec..8e9d31277c43 100644
--- a/drivers/usb/chipidea/host.c
+++ b/drivers/usb/chipidea/host.c
@@ -20,77 +20,18 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/io.h>
 #include <linux/usb.h>
 #include <linux/usb/hcd.h>
 #include <linux/usb/chipidea.h>
 
-#define CHIPIDEA_EHCI
-#include "../host/ehci-hcd.c"
+#include "../host/ehci.h"
 
 #include "ci.h"
 #include "bits.h"
 #include "host.h"
 
-static int ci_ehci_setup(struct usb_hcd *hcd)
-{
-        struct ehci_hcd *ehci = hcd_to_ehci(hcd);
-        int ret;
-
-        hcd->has_tt = 1;
-
-        ret = ehci_setup(hcd);
-        if (ret)
-                return ret;
-
-        ehci_port_power(ehci, 0);
-
-        return ret;
-}
-
-static const struct hc_driver ci_ehci_hc_driver = {
-        .description    = "ehci_hcd",
-        .product_desc   = "ChipIdea HDRC EHCI",
-        .hcd_priv_size  = sizeof(struct ehci_hcd),
-
-        /*
-         * generic hardware linkage
-         */
-        .irq    = ehci_irq,
-        .flags  = HCD_MEMORY | HCD_USB2,
-
-        /*
-         * basic lifecycle operations
-         */
-        .reset          = ci_ehci_setup,
-        .start          = ehci_run,
-        .stop           = ehci_stop,
-        .shutdown       = ehci_shutdown,
-
-        /*
-         * managing i/o requests and associated device resources
-         */
-        .urb_enqueue            = ehci_urb_enqueue,
-        .urb_dequeue            = ehci_urb_dequeue,
-        .endpoint_disable       = ehci_endpoint_disable,
-        .endpoint_reset         = ehci_endpoint_reset,
-
-        /*
-         * scheduling support
-         */
-        .get_frame_number = ehci_get_frame,
-
-        /*
-         * root hub support
-         */
-        .hub_status_data        = ehci_hub_status_data,
-        .hub_control            = ehci_hub_control,
-        .bus_suspend            = ehci_bus_suspend,
-        .bus_resume             = ehci_bus_resume,
-        .relinquish_port        = ehci_relinquish_port,
-        .port_handed_over       = ehci_port_handed_over,
-
-        .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
-};
+static struct hc_driver __read_mostly ci_ehci_hc_driver;
 
 static irqreturn_t host_irq(struct ci13xxx *ci)
 {
@@ -129,6 +70,9 @@ static int host_start(struct ci13xxx *ci)
         else
                 ci->hcd = hcd;
 
+        if (ci->platdata->flags & CI13XXX_DISABLE_STREAMING)
+                hw_write(ci, OP_USBMODE, USBMODE_CI_SDIS, USBMODE_CI_SDIS);
+
         return ret;
 }
 
@@ -157,5 +101,7 @@ int ci_hdrc_host_init(struct ci13xxx *ci)
         rdrv->name      = "host";
         ci->roles[CI_ROLE_HOST] = rdrv;
 
+        ehci_init_driver(&ci_ehci_hc_driver, NULL);
+
         return 0;
 }
diff --git a/drivers/usb/chipidea/usbmisc_imx6q.c b/drivers/usb/chipidea/usbmisc_imx6q.c
index 416e3fc58fd0..845efe29e6b9 100644
--- a/drivers/usb/chipidea/usbmisc_imx6q.c
+++ b/drivers/usb/chipidea/usbmisc_imx6q.c
@@ -82,7 +82,7 @@ static const struct of_device_id usbmisc_imx6q_dt_ids[] = {
         { /* sentinel */ }
 };
 
-static int __devinit usbmisc_imx6q_probe(struct platform_device *pdev)
+static int usbmisc_imx6q_probe(struct platform_device *pdev)
 {
         struct resource *res;
         struct imx6q_usbmisc *data;
@@ -127,7 +127,7 @@ static int __devinit usbmisc_imx6q_probe(struct platform_device *pdev)
         return 0;
 }
 
-static int __devexit usbmisc_imx6q_remove(struct platform_device *pdev)
+static int usbmisc_imx6q_remove(struct platform_device *pdev)
 {
         usbmisc_unset_ops(&imx6q_usbmisc_ops);
         clk_disable_unprepare(usbmisc->clk);
@@ -136,7 +136,7 @@ static int __devexit usbmisc_imx6q_remove(struct platform_device *pdev)
 
 static struct platform_driver usbmisc_imx6q_driver = {
         .probe = usbmisc_imx6q_probe,
-        .remove = __devexit_p(usbmisc_imx6q_remove),
+        .remove = usbmisc_imx6q_remove,
         .driver = {
                 .name = "usbmisc_imx6q",
                 .owner = THIS_MODULE,
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 6e49ec6f3adc..2d92cce260d7 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -787,6 +787,10 @@ static int get_serial_info(struct acm *acm, struct serial_struct __user *info)
         tmp.flags = ASYNC_LOW_LATENCY;
         tmp.xmit_fifo_size = acm->writesize;
         tmp.baud_base = le32_to_cpu(acm->line.dwDTERate);
+        tmp.close_delay = acm->port.close_delay / 10;
+        tmp.closing_wait = acm->port.closing_wait == ASYNC_CLOSING_WAIT_NONE ?
+                                ASYNC_CLOSING_WAIT_NONE :
+                                acm->port.closing_wait / 10;
 
         if (copy_to_user(info, &tmp, sizeof(tmp)))
                 return -EFAULT;
@@ -794,6 +798,37 @@ static int get_serial_info(struct acm *acm, struct serial_struct __user *info)
                 return 0;
 }
 
+static int set_serial_info(struct acm *acm,
+                                struct serial_struct __user *newinfo)
+{
+        struct serial_struct new_serial;
+        unsigned int closing_wait, close_delay;
+        int retval = 0;
+
+        if (copy_from_user(&new_serial, newinfo, sizeof(new_serial)))
+                return -EFAULT;
+
+        close_delay = new_serial.close_delay * 10;
+        closing_wait = new_serial.closing_wait == ASYNC_CLOSING_WAIT_NONE ?
+                        ASYNC_CLOSING_WAIT_NONE : new_serial.closing_wait * 10;
+
+        mutex_lock(&acm->port.mutex);
+
+        if (!capable(CAP_SYS_ADMIN)) {
+                if ((close_delay != acm->port.close_delay) ||
+                    (closing_wait != acm->port.closing_wait))
+                        retval = -EPERM;
+                else
+                        retval = -EOPNOTSUPP;
+        } else {
+                acm->port.close_delay  = close_delay;
+                acm->port.closing_wait = closing_wait;
+        }
+
+        mutex_unlock(&acm->port.mutex);
+        return retval;
+}
+
 static int acm_tty_ioctl(struct tty_struct *tty,
                                         unsigned int cmd, unsigned long arg)
 {
@@ -804,6 +839,9 @@ static int acm_tty_ioctl(struct tty_struct *tty,
         case TIOCGSERIAL: /* gets serial port data */
                 rv = get_serial_info(acm, (struct serial_struct __user *) arg);
                 break;
+        case TIOCSSERIAL:
+                rv = set_serial_info(acm, (struct serial_struct __user *) arg);
+                break;
         }
 
         return rv;
@@ -1564,6 +1602,9 @@ static const struct usb_device_id acm_ids[] = {
         { USB_DEVICE(0x0572, 0x1340), /* Conexant CX93010-2x UCMxx */
         .driver_info = NO_UNION_NORMAL,
         },
+        { USB_DEVICE(0x05f9, 0x4002), /* PSC Scanning, Magellan 800i */
+        .driver_info = NO_UNION_NORMAL,
+        },
         { USB_DEVICE(0x1bbb, 0x0003), /* Alcatel OT-I650 */
         .driver_info = NO_UNION_NORMAL, /* reports zero length descriptor */
         },
diff --git a/drivers/usb/core/devices.c b/drivers/usb/core/devices.c
index f460de31acee..cbacea933b18 100644
--- a/drivers/usb/core/devices.c
+++ b/drivers/usb/core/devices.c
@@ -591,16 +591,14 @@ static ssize_t usb_device_dump(char __user **buffer, size_t *nbytes,
 
         /* Now look at all of this device's children. */
         usb_hub_for_each_child(usbdev, chix, childdev) {
-                if (childdev) {
-                        usb_lock_device(childdev);
-                        ret = usb_device_dump(buffer, nbytes, skip_bytes,
-                                              file_offset, childdev, bus,
-                                              level + 1, chix - 1, ++cnt);
-                        usb_unlock_device(childdev);
-                        if (ret == -EFAULT)
-                                return total_written;
-                        total_written += ret;
-                }
+                usb_lock_device(childdev);
+                ret = usb_device_dump(buffer, nbytes, skip_bytes,
+                                      file_offset, childdev, bus,
+                                      level + 1, chix - 1, ++cnt);
+                usb_unlock_device(childdev);
+                if (ret == -EFAULT)
+                        return total_written;
+                total_written += ret;
         }
         return total_written;
 }
diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index 6056db7af410..d938b2b99e31 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -32,8 +32,6 @@
 #include "usb.h"
 
 
-#ifdef CONFIG_HOTPLUG
-
 /*
  * Adds a new dynamic USBdevice ID to this driver,
  * and cause the driver to probe for all devices again.
@@ -194,20 +192,6 @@ static void usb_free_dynids(struct usb_driver *usb_drv)
         }
         spin_unlock(&usb_drv->dynids.lock);
 }
-#else
-static inline int usb_create_newid_files(struct usb_driver *usb_drv)
-{
-        return 0;
-}
-
-static void usb_remove_newid_files(struct usb_driver *usb_drv)
-{
-}
-
-static inline void usb_free_dynids(struct usb_driver *usb_drv)
-{
-}
-#endif
 
 static const struct usb_device_id *usb_match_dynamic_id(struct usb_interface *intf,
                                                         struct usb_driver *drv)
@@ -238,7 +222,7 @@ static int usb_probe_device(struct device *dev)
         /* TODO: Add real matching code */
 
         /* The device should always appear to be in use
-         * unless the driver suports autosuspend.
+         * unless the driver supports autosuspend.
          */
         if (!udriver->supports_autosuspend)
                 error = usb_autoresume_device(udev);
@@ -790,7 +774,6 @@ static int usb_device_match(struct device *dev, struct device_driver *drv)
         return 0;
 }
 
-#ifdef  CONFIG_HOTPLUG
 static int usb_uevent(struct device *dev, struct kobj_uevent_env *env)
 {
         struct usb_device *usb_dev;
@@ -832,14 +815,6 @@ static int usb_uevent(struct device *dev, struct kobj_uevent_env *env)
         return 0;
 }
 
-#else
-
-static int usb_uevent(struct device *dev, struct kobj_uevent_env *env)
-{
-        return -ENODEV;
-}
-#endif  /* CONFIG_HOTPLUG */
-
 /**
  * usb_register_device_driver - register a USB device (not interface) driver
  * @new_udriver: USB operations for the device driver
diff --git a/drivers/usb/core/generic.c b/drivers/usb/core/generic.c
index 69ecd3c92311..eff2010eb63f 100644
--- a/drivers/usb/core/generic.c
+++ b/drivers/usb/core/generic.c
@@ -47,6 +47,9 @@ int usb_choose_configuration(struct usb_device *udev)
         int insufficient_power = 0;
         struct usb_host_config *c, *best;
 
+        if (usb_device_is_owned(udev))
+                return 0;
+
         best = NULL;
         c = udev->config;
         num_configs = udev->descriptor.bNumConfigurations;
@@ -160,9 +163,7 @@ static int generic_probe(struct usb_device *udev)
         /* Choose and set the configuration.  This registers the interfaces
          * with the driver core and lets interface drivers bind to them.
          */
-        if (usb_device_is_owned(udev))
-                ;               /* Don't configure if the device is owned */
-        else if (udev->authorized == 0)
+        if (udev->authorized == 0)
                 dev_err(&udev->dev, "Device is not authorized for usage\n");
         else {
                 c = usb_choose_configuration(udev);
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index f034716190ff..4225d5e72131 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -2039,8 +2039,9 @@ int hcd_bus_resume(struct usb_device *rhdev, pm_message_t msg)
         status = hcd->driver->bus_resume(hcd);
         clear_bit(HCD_FLAG_WAKEUP_PENDING, &hcd->flags);
         if (status == 0) {
-                /* TRSMRCY = 10 msec */
-                msleep(10);
+                struct usb_device *udev;
+                int port1;
+
                 spin_lock_irq(&hcd_root_hub_lock);
                 if (!HCD_DEAD(hcd)) {
                         usb_set_device_state(rhdev, rhdev->actconfig
@@ -2050,6 +2051,20 @@ int hcd_bus_resume(struct usb_device *rhdev, pm_message_t msg)
                         hcd->state = HC_STATE_RUNNING;
                 }
                 spin_unlock_irq(&hcd_root_hub_lock);
+
+                /*
+                 * Check whether any of the enabled ports on the root hub are
+                 * unsuspended.  If they are then a TRSMRCY delay is needed
+                 * (this is what the USB-2 spec calls a "global resume").
+                 * Otherwise we can skip the delay.
+                 */
+                usb_hub_for_each_child(rhdev, port1, udev) {
+                        if (udev->state != USB_STATE_NOTATTACHED &&
+                                        !udev->port_is_suspended) {
+                                usleep_range(10000, 11000);     /* TRSMRCY */
+                                break;
+                        }
+                }
         } else {
                 hcd->state = old_state;
                 dev_dbg(&rhdev->dev, "bus %s fail, err %d\n",
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 1af04bdeaf0c..957ed2c41482 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -39,6 +39,9 @@
 #endif
 #endif
 
+#define USB_VENDOR_GENESYS_LOGIC                0x05e3
+#define HUB_QUIRK_CHECK_PORT_AUTOSUSPEND        0x01
+
 struct usb_port {
         struct usb_device *child;
         struct device dev;
@@ -86,6 +89,8 @@ struct usb_hub {
         unsigned                quiescing:1;
         unsigned                disconnected:1;
 
+        unsigned                quirk_check_port_auto_suspend:1;
+
         unsigned                has_indicators:1;
         u8                      indicator[USB_MAXCHILDREN];
         struct delayed_work     leds;
@@ -736,7 +741,6 @@ static void hub_tt_work(struct work_struct *work)
         struct usb_hub          *hub =
                 container_of(work, struct usb_hub, tt.clear_work);
         unsigned long           flags;
-        int                     limit = 100;
 
         spin_lock_irqsave (&hub->tt.lock, flags);
         while (!list_empty(&hub->tt.clear_list)) {
@@ -746,9 +750,6 @@ static void hub_tt_work(struct work_struct *work)
                 const struct hc_driver  *drv;
                 int                     status;
 
-                if (!hub->quiescing && --limit < 0)
-                        break;
-
                 next = hub->tt.clear_list.next;
                 clear = list_entry (next, struct usb_tt_clear, clear_list);
                 list_del (&clear->clear_list);
@@ -876,6 +877,60 @@ static int hub_hub_status(struct usb_hub *hub,
         return ret;
 }
 
+static int hub_set_port_link_state(struct usb_hub *hub, int port1,
+                        unsigned int link_status)
+{
+        return set_port_feature(hub->hdev,
+                        port1 | (link_status << 3),
+                        USB_PORT_FEAT_LINK_STATE);
+}
+
+/*
+ * If USB 3.0 ports are placed into the Disabled state, they will no longer
+ * detect any device connects or disconnects.  This is generally not what the
+ * USB core wants, since it expects a disabled port to produce a port status
+ * change event when a new device connects.
+ *
+ * Instead, set the link state to Disabled, wait for the link to settle into
+ * that state, clear any change bits, and then put the port into the RxDetect
+ * state.
+ */
+static int hub_usb3_port_disable(struct usb_hub *hub, int port1)
+{
+        int ret;
+        int total_time;
+        u16 portchange, portstatus;
+
+        if (!hub_is_superspeed(hub->hdev))
+                return -EINVAL;
+
+        ret = hub_set_port_link_state(hub, port1, USB_SS_PORT_LS_SS_DISABLED);
+        if (ret) {
+                dev_err(hub->intfdev, "cannot disable port %d (err = %d)\n",
+                                port1, ret);
+                return ret;
+        }
+
+        /* Wait for the link to enter the disabled state. */
+        for (total_time = 0; ; total_time += HUB_DEBOUNCE_STEP) {
+                ret = hub_port_status(hub, port1, &portstatus, &portchange);
+                if (ret < 0)
+                        return ret;
+
+                if ((portstatus & USB_PORT_STAT_LINK_STATE) ==
+                                USB_SS_PORT_LS_SS_DISABLED)
+                        break;
+                if (total_time >= HUB_DEBOUNCE_TIMEOUT)
+                        break;
+                msleep(HUB_DEBOUNCE_STEP);
+        }
+        if (total_time >= HUB_DEBOUNCE_TIMEOUT)
+                dev_warn(hub->intfdev, "Could not disable port %d after %d ms\n",
+                                port1, total_time);
+
+        return hub_set_port_link_state(hub, port1, USB_SS_PORT_LS_RX_DETECT);
+}
+
 static int hub_port_disable(struct usb_hub *hub, int port1, int set_state)
 {
         struct usb_device *hdev = hub->hdev;
@@ -884,8 +939,13 @@ static int hub_port_disable(struct usb_hub *hub, int port1, int set_state)
         if (hub->ports[port1 - 1]->child && set_state)
                 usb_set_device_state(hub->ports[port1 - 1]->child,
                                 USB_STATE_NOTATTACHED);
-        if (!hub->error && !hub_is_superspeed(hub->hdev))
-                ret = clear_port_feature(hdev, port1, USB_PORT_FEAT_ENABLE);
+        if (!hub->error) {
+                if (hub_is_superspeed(hub->hdev))
+                        ret = hub_usb3_port_disable(hub, port1);
+                else
+                        ret = clear_port_feature(hdev, port1,
+                                        USB_PORT_FEAT_ENABLE);
+        }
         if (ret)
                 dev_err(hub->intfdev, "cannot disable port %d (err = %d)\n",
                                 port1, ret);
@@ -1612,6 +1672,41 @@ static int hub_probe(struct usb_interface *intf, const struct usb_device_id *id)
         desc = intf->cur_altsetting;
         hdev = interface_to_usbdev(intf);
 
+        /*
+         * Set default autosuspend delay as 0 to speedup bus suspend,
+         * based on the below considerations:
+         *
+         * - Unlike other drivers, the hub driver does not rely on the
+         *   autosuspend delay to provide enough time to handle a wakeup
+         *   event, and the submitted status URB is just to check future
+         *   change on hub downstream ports, so it is safe to do it.
+         *
+         * - The patch might cause one or more auto supend/resume for
+         *   below very rare devices when they are plugged into hub
+         *   first time:
+         *
+         *      devices having trouble initializing, and disconnect
+         *      themselves from the bus and then reconnect a second
+         *      or so later
+         *
+         *      devices just for downloading firmware, and disconnects
+         *      themselves after completing it
+         *
+         *   For these quite rare devices, their drivers may change the
+         *   autosuspend delay of their parent hub in the probe() to one
+         *   appropriate value to avoid the subtle problem if someone
+         *   does care it.
+         *
+         * - The patch may cause one or more auto suspend/resume on
+         *   hub during running 'lsusb', but it is probably too
+         *   infrequent to worry about.
+         *
+         * - Change autosuspend delay of hub can avoid unnecessary auto
+         *   suspend timer for hub, also may decrease power consumption
+         *   of USB bus.
+         */
+        pm_runtime_set_autosuspend_delay(&hdev->dev, 0);
+
         /* Hubs have proper suspend/resume support. */
         usb_enable_autosuspend(hdev);
 
@@ -1670,6 +1765,9 @@ descriptor_error:
         if (hdev->speed == USB_SPEED_HIGH)
                 highspeed_hubs++;
 
+        if (id->driver_info & HUB_QUIRK_CHECK_PORT_AUTOSUSPEND)
+                hub->quirk_check_port_auto_suspend = 1;
+
         if (hub_configure(hub, endpoint) >= 0)
                 return 0;
 
@@ -2012,7 +2110,7 @@ static void show_string(struct usb_device *udev, char *id, char *string)
 {
         if (!string)
                 return;
-        dev_printk(KERN_INFO, &udev->dev, "%s: %s\n", id, string);
+        dev_info(&udev->dev, "%s: %s\n", id, string);
 }
 
 static void announce_device(struct usb_device *udev)
@@ -2401,7 +2499,7 @@ static unsigned hub_is_wusb(struct usb_hub *hub)
 #define HUB_SHORT_RESET_TIME    10
 #define HUB_BH_RESET_TIME       50
 #define HUB_LONG_RESET_TIME     200
-#define HUB_RESET_TIMEOUT       500
+#define HUB_RESET_TIMEOUT       800
 
 static int hub_port_reset(struct usb_hub *hub, int port1,
                         struct usb_device *udev, unsigned int delay, bool warm);
@@ -2436,6 +2534,10 @@ static int hub_port_wait_reset(struct usb_hub *hub, int port1,
                 if (ret < 0)
                         return ret;
 
+                /* The port state is unknown until the reset completes. */
+                if ((portstatus & USB_PORT_STAT_RESET))
+                        goto delay;
+
                 /*
                  * Some buggy devices require a warm reset to be issued even
                  * when the port appears not to be connected.
@@ -2481,11 +2583,7 @@ static int hub_port_wait_reset(struct usb_hub *hub, int port1,
                         if ((portchange & USB_PORT_STAT_C_CONNECTION))
                                 return -ENOTCONN;
 
-                        /* if we`ve finished resetting, then break out of
-                         * the loop
-                         */
-                        if (!(portstatus & USB_PORT_STAT_RESET) &&
-                            (portstatus & USB_PORT_STAT_ENABLE)) {
+                        if ((portstatus & USB_PORT_STAT_ENABLE)) {
                                 if (hub_is_wusb(hub))
                                         udev->speed = USB_SPEED_WIRELESS;
                                 else if (hub_is_superspeed(hub->hdev))
@@ -2499,10 +2597,15 @@ static int hub_port_wait_reset(struct usb_hub *hub, int port1,
                                 return 0;
                         }
                 } else {
-                        if (portchange & USB_PORT_STAT_C_BH_RESET)
-                                return 0;
+                        if (!(portstatus & USB_PORT_STAT_CONNECTION) ||
+                                        hub_port_warm_reset_required(hub,
+                                                portstatus))
+                                return -ENOTCONN;
+
+                        return 0;
                 }
 
+delay:
                 /* switch to the long delay after two short delay failures */
                 if (delay_time >= 2 * HUB_SHORT_RESET_TIME)
                         delay = HUB_LONG_RESET_TIME;
@@ -2526,14 +2629,11 @@ static void hub_port_finish_reset(struct usb_hub *hub, int port1,
                         msleep(10 + 40);
                         update_devnum(udev, 0);
                         hcd = bus_to_hcd(udev->bus);
-                        if (hcd->driver->reset_device) {
-                                *status = hcd->driver->reset_device(hcd, udev);
-                                if (*status < 0) {
-                                        dev_err(&udev->dev, "Cannot reset "
-                                                        "HCD device state\n");
-                                        break;
-                                }
-                        }
+                        /* The xHC may think the device is already reset,
+                         * so ignore the status.
+                         */
+                        if (hcd->driver->reset_device)
+                                hcd->driver->reset_device(hcd, udev);
                 }
                 /* FALL THROUGH */
         case -ENOTCONN:
@@ -2541,16 +2641,16 @@ static void hub_port_finish_reset(struct usb_hub *hub, int port1,
                 clear_port_feature(hub->hdev,
                                 port1, USB_PORT_FEAT_C_RESET);
                 /* FIXME need disconnect() for NOTATTACHED device */
-                if (warm) {
+                if (hub_is_superspeed(hub->hdev)) {
                         clear_port_feature(hub->hdev, port1,
                                         USB_PORT_FEAT_C_BH_PORT_RESET);
                         clear_port_feature(hub->hdev, port1,
                                         USB_PORT_FEAT_C_PORT_LINK_STATE);
-                } else {
+                }
+                if (!warm)
                         usb_set_device_state(udev, *status
                                         ? USB_STATE_NOTATTACHED
                                         : USB_STATE_DEFAULT);
-                }
                 break;
         }
 }
@@ -2879,6 +2979,7 @@ int usb_port_suspend(struct usb_device *udev, pm_message_t msg)
                                 (PMSG_IS_AUTO(msg) ? "auto-" : ""),
                                 udev->do_remote_wakeup);
                 usb_set_device_state(udev, USB_STATE_SUSPENDED);
+                udev->port_is_suspended = 1;
                 msleep(10);
         }
         usb_mark_last_busy(hub->hdev);
@@ -2899,7 +3000,7 @@ int usb_port_suspend(struct usb_device *udev, pm_message_t msg)
 static int finish_port_resume(struct usb_device *udev)
 {
         int     status = 0;
-        u16     devstatus;
+        u16     devstatus = 0;
 
         /* caller owns the udev device lock */
         dev_dbg(&udev->dev, "%s\n",
@@ -2944,7 +3045,13 @@ static int finish_port_resume(struct usb_device *udev)
         if (status) {
                 dev_dbg(&udev->dev, "gone after usb resume? status %d\n",
                                 status);
-        } else if (udev->actconfig) {
+        /*
+         * There are a few quirky devices which violate the standard
+         * by claiming to have remote wakeup enabled after a reset,
+         * which crash if the feature is cleared, hence check for
+         * udev->reset_resume
+         */
+        } else if (udev->actconfig && !udev->reset_resume) {
                 le16_to_cpus(&devstatus);
                 if (devstatus & (1 << USB_DEVICE_REMOTE_WAKEUP)) {
                         status = usb_control_msg(udev,
@@ -3043,6 +3150,7 @@ int usb_port_resume(struct usb_device *udev, pm_message_t msg)
 
  SuspendCleared:
         if (status == 0) {
+                udev->port_is_suspended = 0;
                 if (hub_is_superspeed(hub->hdev)) {
                         if (portchange & USB_PORT_STAT_C_LINK_STATE)
                                 clear_port_feature(hub->hdev, port1,
@@ -3126,6 +3234,21 @@ int usb_port_resume(struct usb_device *udev, pm_message_t msg)
 
 #endif
 
+static int check_ports_changed(struct usb_hub *hub)
+{
+        int port1;
+
+        for (port1 = 1; port1 <= hub->hdev->maxchild; ++port1) {
+                u16 portstatus, portchange;
+                int status;
+
+                status = hub_port_status(hub, port1, &portstatus, &portchange);
+                if (!status && portchange)
+                        return 1;
+        }
+        return 0;
+}
+
 static int hub_suspend(struct usb_interface *intf, pm_message_t msg)
 {
         struct usb_hub          *hub = usb_get_intfdata (intf);
@@ -3144,6 +3267,16 @@ static int hub_suspend(struct usb_interface *intf, pm_message_t msg)
                                 return -EBUSY;
                 }
         }
+
+        if (hdev->do_remote_wakeup && hub->quirk_check_port_auto_suspend) {
+                /* check if there are changes pending on hub ports */
+                if (check_ports_changed(hub)) {
+                        if (PMSG_IS_AUTO(msg))
+                                return -EBUSY;
+                        pm_wakeup_event(&hdev->dev, 2000);
+                }
+        }
+
         if (hub_is_superspeed(hdev) && hdev->do_remote_wakeup) {
                 /* Enable hub to send remote wakeup for all ports. */
                 for (port1 = 1; port1 <= hdev->maxchild; port1++) {
@@ -3972,6 +4105,9 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
         if (retval)
                 goto fail;
 
+        if (hcd->phy && !hdev->parent)
+                usb_phy_notify_connect(hcd->phy, udev->speed);
+
         /*
          * Some superspeed devices have finished the link training process
          * and attached to a superspeed hub port, but the device descriptor
@@ -4166,8 +4302,12 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1,
         }
 
         /* Disconnect any existing devices under this port */
-        if (udev)
+        if (udev) {
+                if (hcd->phy && !hdev->parent &&
+                                !(portstatus & USB_PORT_STAT_CONNECTION))
+                        usb_phy_notify_disconnect(hcd->phy, udev->speed);
                 usb_disconnect(&hub->ports[port1 - 1]->child);
+        }
         clear_bit(port1, hub->change_bits);
 
         /* We can forget about a "removed" device when there's a physical
@@ -4190,13 +4330,6 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1,
                 }
         }
 
-        if (hcd->phy && !hdev->parent) {
-                if (portstatus & USB_PORT_STAT_CONNECTION)
-                        usb_phy_notify_connect(hcd->phy, port1);
-                else
-                        usb_phy_notify_disconnect(hcd->phy, port1);
-        }
-
         /* Return now if debouncing failed or nothing is connected or
          * the device was "removed".
          */
@@ -4572,9 +4705,14 @@ static void hub_events(void)
                          * SS.Inactive state.
                          */
                         if (hub_port_warm_reset_required(hub, portstatus)) {
+                                int status;
+
                                 dev_dbg(hub_dev, "warm reset port %d\n", i);
-                                hub_port_reset(hub, i, NULL,
+                                status = hub_port_reset(hub, i, NULL,
                                                 HUB_BH_RESET_TIME, true);
+                                if (status < 0)
+                                        hub_port_disable(hub, i, 1);
+                                connect_change = 0;
                         }
 
                         if (connect_change)
@@ -4648,6 +4786,11 @@ static int hub_thread(void *__unused)
 }
 
 static const struct usb_device_id hub_id_table[] = {
+    { .match_flags = USB_DEVICE_ID_MATCH_VENDOR
+                   | USB_DEVICE_ID_MATCH_INT_CLASS,
+      .idVendor = USB_VENDOR_GENESYS_LOGIC,
+      .bInterfaceClass = USB_CLASS_HUB,
+      .driver_info = HUB_QUIRK_CHECK_PORT_AUTOSUSPEND},
     { .match_flags = USB_DEVICE_ID_MATCH_DEV_CLASS,
       .bDeviceClass = USB_CLASS_HUB},
     { .match_flags = USB_DEVICE_ID_MATCH_INT_CLASS,
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index 1ed5afd91e6d..131f73649b60 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -1540,7 +1540,6 @@ static void usb_release_interface(struct device *dev)
         kfree(intf);
 }
 
-#ifdef  CONFIG_HOTPLUG
 static int usb_if_uevent(struct device *dev, struct kobj_uevent_env *env)
 {
         struct usb_device *usb_dev;
@@ -1575,14 +1574,6 @@ static int usb_if_uevent(struct device *dev, struct kobj_uevent_env *env)
         return 0;
 }
 
-#else
-
-static int usb_if_uevent(struct device *dev, struct kobj_uevent_env *env)
-{
-        return -ENODEV;
-}
-#endif  /* CONFIG_HOTPLUG */
-
 struct device_type usb_if_device_type = {
         .name =         "usb_interface",
         .release =      usb_release_interface,
@@ -1795,7 +1786,8 @@ free_interfaces:
         if (dev->actconfig && usb_disable_lpm(dev)) {
                 dev_err(&dev->dev, "%s Failed to disable LPM\n.", __func__);
                 mutex_unlock(hcd->bandwidth_mutex);
-                return -ENOMEM;
+                ret = -ENOMEM;
+                goto free_interfaces;
         }
         ret = usb_hcd_alloc_bandwidth(dev, cp, NULL, NULL);
         if (ret < 0) {
@@ -1806,29 +1798,8 @@ free_interfaces:
                 goto free_interfaces;
         }
 
-        ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
-                              USB_REQ_SET_CONFIGURATION, 0, configuration, 0,
-                              NULL, 0, USB_CTRL_SET_TIMEOUT);
-        if (ret < 0) {
-                /* All the old state is gone, so what else can we do?
-                 * The device is probably useless now anyway.
-                 */
-                cp = NULL;
-        }
-
-        dev->actconfig = cp;
-        if (!cp) {
-                usb_set_device_state(dev, USB_STATE_ADDRESS);
-                usb_hcd_alloc_bandwidth(dev, NULL, NULL, NULL);
-                /* Leave LPM disabled while the device is unconfigured. */
-                mutex_unlock(hcd->bandwidth_mutex);
-                usb_autosuspend_device(dev);
-                goto free_interfaces;
-        }
-        mutex_unlock(hcd->bandwidth_mutex);
-        usb_set_device_state(dev, USB_STATE_CONFIGURED);
-
-        /* Initialize the new interface structures and the
+        /*
+         * Initialize the new interface structures and the
          * hc/hcd/usbcore interface/endpoint state.
          */
         for (i = 0; i < nintf; ++i) {
@@ -1872,6 +1843,35 @@ free_interfaces:
         }
         kfree(new_interfaces);
 
+        ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
+                              USB_REQ_SET_CONFIGURATION, 0, configuration, 0,
+                              NULL, 0, USB_CTRL_SET_TIMEOUT);
+        if (ret < 0 && cp) {
+                /*
+                 * All the old state is gone, so what else can we do?
+                 * The device is probably useless now anyway.
+                 */
+                usb_hcd_alloc_bandwidth(dev, NULL, NULL, NULL);
+                for (i = 0; i < nintf; ++i) {
+                        usb_disable_interface(dev, cp->interface[i], true);
+                        put_device(&cp->interface[i]->dev);
+                        cp->interface[i] = NULL;
+                }
+                cp = NULL;
+        }
+
+        dev->actconfig = cp;
+        mutex_unlock(hcd->bandwidth_mutex);
+
+        if (!cp) {
+                usb_set_device_state(dev, USB_STATE_ADDRESS);
+
+                /* Leave LPM disabled while the device is unconfigured. */
+                usb_autosuspend_device(dev);
+                return ret;
+        }
+        usb_set_device_state(dev, USB_STATE_CONFIGURED);
+
         if (cp->string == NULL &&
                         !(dev->quirks & USB_QUIRK_CONFIG_INTF_STRINGS))
                 cp->string = usb_cache_string(dev, cp->desc.iConfiguration);
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index fdefd9c7f7af..3113c1d71442 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -43,6 +43,9 @@ static const struct usb_device_id usb_quirk_list[] = {
         /* Creative SB Audigy 2 NX */
         { USB_DEVICE(0x041e, 0x3020), .driver_info = USB_QUIRK_RESET_RESUME },
 
+        /* Microsoft LifeCam-VX700 v2.0 */
+        { USB_DEVICE(0x045e, 0x0770), .driver_info = USB_QUIRK_RESET_RESUME },
+
         /* Logitech Quickcam Fusion */
         { USB_DEVICE(0x046d, 0x08c1), .driver_info = USB_QUIRK_RESET_RESUME },
 
diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c
index 9d912bfdcffe..e0d9d948218c 100644
--- a/drivers/usb/core/urb.c
+++ b/drivers/usb/core/urb.c
@@ -214,9 +214,25 @@ EXPORT_SYMBOL_GPL(usb_unanchor_urb);
  * urb->interval is modified to reflect the actual transfer period used
  * (normally some power of two units).  And for isochronous urbs,
  * urb->start_frame is modified to reflect when the URB's transfers were
- * scheduled to start.  Not all isochronous transfer scheduling policies
- * will work, but most host controller drivers should easily handle ISO
- * queues going from now until 10-200 msec into the future.
+ * scheduled to start.
+ *
+ * Not all isochronous transfer scheduling policies will work, but most
+ * host controller drivers should easily handle ISO queues going from now
+ * until 10-200 msec into the future.  Drivers should try to keep at
+ * least one or two msec of data in the queue; many controllers require
+ * that new transfers start at least 1 msec in the future when they are
+ * added.  If the driver is unable to keep up and the queue empties out,
+ * the behavior for new submissions is governed by the URB_ISO_ASAP flag.
+ * If the flag is set, or if the queue is idle, then the URB is always
+ * assigned to the first available (and not yet expired) slot in the
+ * endpoint's schedule.  If the flag is not set and the queue is active
+ * then the URB is always assigned to the next slot in the schedule
+ * following the end of the endpoint's previous URB, even if that slot is
+ * in the past.  When a packet is assigned in this way to a slot that has
+ * already expired, the packet is not transmitted and the corresponding
+ * usb_iso_packet_descriptor's status field will return -EXDEV.  If this
+ * would happen to all the packets in the URB, submission fails with a
+ * -EXDEV error code.
  *
  * For control endpoints, the synchronous usb_control_msg() call is
  * often used (in non-interrupt context) instead of this call.
@@ -305,8 +321,13 @@ int usb_submit_urb(struct urb *urb, gfp_t mem_flags)
         struct usb_host_endpoint        *ep;
         int                             is_out;
 
-        if (!urb || urb->hcpriv || !urb->complete)
+        if (!urb || !urb->complete)
                 return -EINVAL;
+        if (urb->hcpriv) {
+                WARN_ONCE(1, "URB %p submitted while active\n", urb);
+                return -EBUSY;
+        }
+
         dev = urb->dev;
         if ((!dev) || (dev->state < USB_STATE_UNAUTHENTICATED))
                 return -ENODEV;
diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
index cd8fb44a3e16..f81b92572735 100644
--- a/drivers/usb/core/usb.c
+++ b/drivers/usb/core/usb.c
@@ -233,7 +233,6 @@ static void usb_release_dev(struct device *dev)
         kfree(udev);
 }
 
-#ifdef  CONFIG_HOTPLUG
 static int usb_dev_uevent(struct device *dev, struct kobj_uevent_env *env)
 {
         struct usb_device *usb_dev;
@@ -249,14 +248,6 @@ static int usb_dev_uevent(struct device *dev, struct kobj_uevent_env *env)
         return 0;
 }
 
-#else
-
-static int usb_dev_uevent(struct device *dev, struct kobj_uevent_env *env)
-{
-        return -ENODEV;
-}
-#endif  /* CONFIG_HOTPLUG */
-
 #ifdef  CONFIG_PM
 
 /* USB device Power-Management thunks.
@@ -370,14 +361,14 @@ struct usb_device *usb_alloc_dev(struct usb_device *parent,
                                  struct usb_bus *bus, unsigned port1)
 {
         struct usb_device *dev;
-        struct usb_hcd *usb_hcd = container_of(bus, struct usb_hcd, self);
+        struct usb_hcd *usb_hcd = bus_to_hcd(bus);
         unsigned root_hub = 0;
 
         dev = kzalloc(sizeof(*dev), GFP_KERNEL);
         if (!dev)
                 return NULL;
 
-        if (!usb_get_hcd(bus_to_hcd(bus))) {
+        if (!usb_get_hcd(usb_hcd)) {
                 kfree(dev);
                 return NULL;
         }
diff --git a/drivers/usb/dwc3/Makefile b/drivers/usb/dwc3/Makefile
index d441fe4c180b..4502648b8171 100644
--- a/drivers/usb/dwc3/Makefile
+++ b/drivers/usb/dwc3/Makefile
@@ -27,19 +27,7 @@ endif
 ##
 
 obj-$(CONFIG_USB_DWC3)          += dwc3-omap.o
-
-##
-# REVISIT Samsung Exynos platform needs the clk API which isn't
-# defined on all architectures. If we allow dwc3-exynos.c compile
-# always we will fail the linking phase on those architectures
-# which don't provide clk api implementation and that's unnaceptable.
-#
-# When Samsung's platform start supporting pm_runtime, this check
-# for HAVE_CLK should be removed.
-##
-ifneq ($(CONFIG_HAVE_CLK),)
-        obj-$(CONFIG_USB_DWC3)          += dwc3-exynos.o
-endif
+obj-$(CONFIG_USB_DWC3)          += dwc3-exynos.o
 
 ifneq ($(CONFIG_PCI),)
         obj-$(CONFIG_USB_DWC3)          += dwc3-pci.o
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index c14ebc975ba4..3a4004a620ad 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -66,45 +66,6 @@ MODULE_PARM_DESC(maximum_speed, "Maximum supported speed.");
 
 /* -------------------------------------------------------------------------- */
 
-#define DWC3_DEVS_POSSIBLE      32
-
-static DECLARE_BITMAP(dwc3_devs, DWC3_DEVS_POSSIBLE);
-
-int dwc3_get_device_id(void)
-{
-        int             id;
-
-again:
-        id = find_first_zero_bit(dwc3_devs, DWC3_DEVS_POSSIBLE);
-        if (id < DWC3_DEVS_POSSIBLE) {
-                int old;
-
-                old = test_and_set_bit(id, dwc3_devs);
-                if (old)
-                        goto again;
-        } else {
-                pr_err("dwc3: no space for new device\n");
-                id = -ENOMEM;
-        }
-
-        return id;
-}
-EXPORT_SYMBOL_GPL(dwc3_get_device_id);
-
-void dwc3_put_device_id(int id)
-{
-        int                     ret;
-
-        if (id < 0)
-                return;
-
-        ret = test_bit(id, dwc3_devs);
-        WARN(!ret, "dwc3: ID %d not in use\n", id);
-        smp_mb__before_clear_bit();
-        clear_bit(id, dwc3_devs);
-}
-EXPORT_SYMBOL_GPL(dwc3_put_device_id);
-
 void dwc3_set_mode(struct dwc3 *dwc, u32 mode)
 {
         u32 reg;
@@ -169,7 +130,6 @@ static void dwc3_free_one_event_buffer(struct dwc3 *dwc,
                 struct dwc3_event_buffer *evt)
 {
         dma_free_coherent(dwc->dev, evt->length, evt->buf, evt->dma);
-        kfree(evt);
 }
 
 /**
@@ -180,12 +140,11 @@ static void dwc3_free_one_event_buffer(struct dwc3 *dwc,
  * Returns a pointer to the allocated event buffer structure on success
  * otherwise ERR_PTR(errno).
  */
-static struct dwc3_event_buffer *__devinit
-dwc3_alloc_one_event_buffer(struct dwc3 *dwc, unsigned length)
+static struct dwc3_event_buffer *dwc3_alloc_one_event_buffer(struct dwc3 *dwc, unsigned length)
 {
         struct dwc3_event_buffer        *evt;
 
-        evt = kzalloc(sizeof(*evt), GFP_KERNEL);
+        evt = devm_kzalloc(dwc->dev, sizeof(*evt), GFP_KERNEL);
         if (!evt)
                 return ERR_PTR(-ENOMEM);
 
@@ -193,10 +152,8 @@ dwc3_alloc_one_event_buffer(struct dwc3 *dwc, unsigned length)
         evt->length     = length;
         evt->buf        = dma_alloc_coherent(dwc->dev, length,
                         &evt->dma, GFP_KERNEL);
-        if (!evt->buf) {
-                kfree(evt);
+        if (!evt->buf)
                 return ERR_PTR(-ENOMEM);
-        }
 
         return evt;
 }
@@ -215,8 +172,6 @@ static void dwc3_free_event_buffers(struct dwc3 *dwc)
                 if (evt)
                         dwc3_free_one_event_buffer(dwc, evt);
         }
-
-        kfree(dwc->ev_buffs);
 }
 
 /**
@@ -227,7 +182,7 @@ static void dwc3_free_event_buffers(struct dwc3 *dwc)
  * Returns 0 on success otherwise negative errno. In the error case, dwc
  * may contain some buffers allocated but not all which were requested.
  */
-static int __devinit dwc3_alloc_event_buffers(struct dwc3 *dwc, unsigned length)
+static int dwc3_alloc_event_buffers(struct dwc3 *dwc, unsigned length)
 {
         int                     num;
         int                     i;
@@ -235,7 +190,8 @@ static int __devinit dwc3_alloc_event_buffers(struct dwc3 *dwc, unsigned length)
         num = DWC3_NUM_INT(dwc->hwparams.hwparams1);
         dwc->num_event_buffers = num;
 
-        dwc->ev_buffs = kzalloc(sizeof(*dwc->ev_buffs) * num, GFP_KERNEL);
+        dwc->ev_buffs = devm_kzalloc(dwc->dev, sizeof(*dwc->ev_buffs) * num,
+                        GFP_KERNEL);
         if (!dwc->ev_buffs) {
                 dev_err(dwc->dev, "can't allocate event buffers array\n");
                 return -ENOMEM;
@@ -303,7 +259,7 @@ static void dwc3_event_buffers_cleanup(struct dwc3 *dwc)
         }
 }
 
-static void __devinit dwc3_cache_hwparams(struct dwc3 *dwc)
+static void dwc3_cache_hwparams(struct dwc3 *dwc)
 {
         struct dwc3_hwparams    *parms = &dwc->hwparams;
 
@@ -324,7 +280,7 @@ static void __devinit dwc3_cache_hwparams(struct dwc3 *dwc)
  *
  * Returns 0 on success otherwise negative errno.
  */
-static int __devinit dwc3_core_init(struct dwc3 *dwc)
+static int dwc3_core_init(struct dwc3 *dwc)
 {
         unsigned long           timeout;
         u32                     reg;
@@ -358,8 +314,6 @@ static int __devinit dwc3_core_init(struct dwc3 *dwc)
 
         dwc3_core_soft_reset(dwc);
 
-        dwc3_cache_hwparams(dwc);
-
         reg = dwc3_readl(dwc->regs, DWC3_GCTL);
         reg &= ~DWC3_GCTL_SCALEDOWN_MASK;
         reg &= ~DWC3_GCTL_DISSCRAMBLE;
@@ -383,24 +337,14 @@ static int __devinit dwc3_core_init(struct dwc3 *dwc)
 
         dwc3_writel(dwc->regs, DWC3_GCTL, reg);
 
-        ret = dwc3_alloc_event_buffers(dwc, DWC3_EVENT_BUFFERS_SIZE);
-        if (ret) {
-                dev_err(dwc->dev, "failed to allocate event buffers\n");
-                ret = -ENOMEM;
-                goto err1;
-        }
-
         ret = dwc3_event_buffers_setup(dwc);
         if (ret) {
                 dev_err(dwc->dev, "failed to setup event buffers\n");
-                goto err1;
+                goto err0;
         }
 
         return 0;
 
-err1:
-        dwc3_free_event_buffers(dwc);
-
 err0:
         return ret;
 }
@@ -408,16 +352,14 @@ err0:
 static void dwc3_core_exit(struct dwc3 *dwc)
 {
         dwc3_event_buffers_cleanup(dwc);
-        dwc3_free_event_buffers(dwc);
 
         usb_phy_shutdown(dwc->usb2_phy);
         usb_phy_shutdown(dwc->usb3_phy);
-
 }
 
 #define DWC3_ALIGN_MASK         (16 - 1)
 
-static int __devinit dwc3_probe(struct platform_device *pdev)
+static int dwc3_probe(struct platform_device *pdev)
 {
         struct device_node      *node = pdev->dev.of_node;
         struct resource         *res;
@@ -515,10 +457,19 @@ static int __devinit dwc3_probe(struct platform_device *pdev)
         pm_runtime_get_sync(dev);
         pm_runtime_forbid(dev);
 
+        dwc3_cache_hwparams(dwc);
+
+        ret = dwc3_alloc_event_buffers(dwc, DWC3_EVENT_BUFFERS_SIZE);
+        if (ret) {
+                dev_err(dwc->dev, "failed to allocate event buffers\n");
+                ret = -ENOMEM;
+                goto err0;
+        }
+
         ret = dwc3_core_init(dwc);
         if (ret) {
                 dev_err(dev, "failed to initialize core\n");
-                return ret;
+                goto err0;
         }
 
         mode = DWC3_MODE(dwc->hwparams.hwparams0);
@@ -590,10 +541,13 @@ err2:
 err1:
         dwc3_core_exit(dwc);
 
+err0:
+        dwc3_free_event_buffers(dwc);
+
         return ret;
 }
 
-static int __devexit dwc3_remove(struct platform_device *pdev)
+static int dwc3_remove(struct platform_device *pdev)
 {
         struct dwc3     *dwc = platform_get_drvdata(pdev);
         struct resource *res;
@@ -628,7 +582,7 @@ static int __devexit dwc3_remove(struct platform_device *pdev)
 
 static struct platform_driver dwc3_driver = {
         .probe          = dwc3_probe,
-        .remove         = __devexit_p(dwc3_remove),
+        .remove         = dwc3_remove,
         .driver         = {
                 .name   = "dwc3",
         },
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 243affc93431..499956344262 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -868,7 +868,4 @@ void dwc3_host_exit(struct dwc3 *dwc);
 int dwc3_gadget_init(struct dwc3 *dwc);
 void dwc3_gadget_exit(struct dwc3 *dwc);
 
-extern int dwc3_get_device_id(void);
-extern void dwc3_put_device_id(int id);
-
 #endif /* __DRIVERS_USB_DWC3_CORE_H */
diff --git a/drivers/usb/dwc3/debugfs.c b/drivers/usb/dwc3/debugfs.c
index d4a30f118724..5945aadaa1c9 100644
--- a/drivers/usb/dwc3/debugfs.c
+++ b/drivers/usb/dwc3/debugfs.c
@@ -56,7 +56,7 @@
 #define dump_register(nm)                               \
 {                                                       \
         .name   = __stringify(nm),                      \
-        .offset = DWC3_ ##nm,                           \
+        .offset = DWC3_ ##nm - DWC3_GLOBALS_REGS_START, \
 }
 
 static const struct debugfs_reg32 dwc3_regs[] = {
@@ -652,7 +652,7 @@ static const struct file_operations dwc3_link_state_fops = {
         .release                = single_release,
 };
 
-int __devinit dwc3_debugfs_init(struct dwc3 *dwc)
+int dwc3_debugfs_init(struct dwc3 *dwc)
 {
         struct dentry           *root;
         struct dentry           *file;
@@ -703,7 +703,7 @@ err0:
         return ret;
 }
 
-void __devexit dwc3_debugfs_exit(struct dwc3 *dwc)
+void dwc3_debugfs_exit(struct dwc3 *dwc)
 {
         debugfs_remove_recursive(dwc->root);
         dwc->root = NULL;
diff --git a/drivers/usb/dwc3/dwc3-exynos.c b/drivers/usb/dwc3/dwc3-exynos.c
index ca6597853f90..aae5328ac771 100644
--- a/drivers/usb/dwc3/dwc3-exynos.c
+++ b/drivers/usb/dwc3/dwc3-exynos.c
@@ -21,6 +21,7 @@
 #include <linux/clk.h>
 #include <linux/usb/otg.h>
 #include <linux/usb/nop-usb-xceiv.h>
+#include <linux/of.h>
 
 #include "core.h"
 
@@ -33,7 +34,7 @@ struct dwc3_exynos {
         struct clk              *clk;
 };
 
-static int __devinit dwc3_exynos_register_phys(struct dwc3_exynos *exynos)
+static int dwc3_exynos_register_phys(struct dwc3_exynos *exynos)
 {
         struct nop_usb_xceiv_platform_data pdata;
         struct platform_device  *pdev;
@@ -87,14 +88,14 @@ err1:
         return ret;
 }
 
-static int __devinit dwc3_exynos_probe(struct platform_device *pdev)
+static u64 dwc3_exynos_dma_mask = DMA_BIT_MASK(32);
+
+static int dwc3_exynos_probe(struct platform_device *pdev)
 {
-        struct dwc3_exynos_data *pdata = pdev->dev.platform_data;
         struct platform_device  *dwc3;
         struct dwc3_exynos      *exynos;
         struct clk              *clk;
 
-        int                     devid;
         int                     ret = -ENOMEM;
 
         exynos = kzalloc(sizeof(*exynos), GFP_KERNEL);
@@ -103,11 +104,15 @@ static int __devinit dwc3_exynos_probe(struct platform_device *pdev)
                 goto err0;
         }
 
-        platform_set_drvdata(pdev, exynos);
+        /*
+         * Right now device-tree probed devices don't get dma_mask set.
+         * Since shared usb code relies on it, set it here for now.
+         * Once we move to full device tree support this will vanish off.
+         */
+        if (!pdev->dev.dma_mask)
+                pdev->dev.dma_mask = &dwc3_exynos_dma_mask;
 
-        devid = dwc3_get_device_id();
-        if (devid < 0)
-                goto err1;
+        platform_set_drvdata(pdev, exynos);
 
         ret = dwc3_exynos_register_phys(exynos);
         if (ret) {
@@ -115,10 +120,10 @@ static int __devinit dwc3_exynos_probe(struct platform_device *pdev)
                 goto err1;
         }
 
-        dwc3 = platform_device_alloc("dwc3", devid);
+        dwc3 = platform_device_alloc("dwc3", PLATFORM_DEVID_AUTO);
         if (!dwc3) {
                 dev_err(&pdev->dev, "couldn't allocate dwc3 device\n");
-                goto err2;
+                goto err1;
         }
 
         clk = clk_get(&pdev->dev, "usbdrd30");
@@ -139,14 +144,6 @@ static int __devinit dwc3_exynos_probe(struct platform_device *pdev)
 
         clk_enable(exynos->clk);
 
-        /* PHY initialization */
-        if (!pdata) {
-                dev_dbg(&pdev->dev, "missing platform data\n");
-        } else {
-                if (pdata->phy_init)
-                        pdata->phy_init(pdev, pdata->phy_type);
-        }
-
         ret = platform_device_add_resources(dwc3, pdev->resource,
                         pdev->num_resources);
         if (ret) {
@@ -163,35 +160,24 @@ static int __devinit dwc3_exynos_probe(struct platform_device *pdev)
         return 0;
 
 err4:
-        if (pdata && pdata->phy_exit)
-                pdata->phy_exit(pdev, pdata->phy_type);
-
         clk_disable(clk);
         clk_put(clk);
 err3:
         platform_device_put(dwc3);
-err2:
-        dwc3_put_device_id(devid);
 err1:
         kfree(exynos);
 err0:
         return ret;
 }
 
-static int __devexit dwc3_exynos_remove(struct platform_device *pdev)
+static int dwc3_exynos_remove(struct platform_device *pdev)
 {
         struct dwc3_exynos      *exynos = platform_get_drvdata(pdev);
-        struct dwc3_exynos_data *pdata = pdev->dev.platform_data;
 
         platform_device_unregister(exynos->dwc3);
         platform_device_unregister(exynos->usb2_phy);
         platform_device_unregister(exynos->usb3_phy);
 
-        dwc3_put_device_id(exynos->dwc3->id);
-
-        if (pdata && pdata->phy_exit)
-                pdata->phy_exit(pdev, pdata->phy_type);
-
         clk_disable(exynos->clk);
         clk_put(exynos->clk);
 
@@ -200,11 +186,20 @@ static int __devexit dwc3_exynos_remove(struct platform_device *pdev)
         return 0;
 }
 
+#ifdef CONFIG_OF
+static const struct of_device_id exynos_dwc3_match[] = {
+        { .compatible = "samsung,exynos-dwc3" },
+        {},
+};
+MODULE_DEVICE_TABLE(of, exynos_dwc3_match);
+#endif
+
 static struct platform_driver dwc3_exynos_driver = {
         .probe          = dwc3_exynos_probe,
-        .remove         = __devexit_p(dwc3_exynos_remove),
+        .remove         = dwc3_exynos_remove,
         .driver         = {
                 .name   = "exynos-dwc3",
+                .of_match_table = of_match_ptr(exynos_dwc3_match),
         },
 };
 
diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c
index ee57a10d90d0..f31867fd2574 100644
--- a/drivers/usb/dwc3/dwc3-omap.c
+++ b/drivers/usb/dwc3/dwc3-omap.c
@@ -157,7 +157,7 @@ static inline void dwc3_omap_writel(void __iomem *base, u32 offset, u32 value)
         writel(value, base + offset);
 }
 
-static int __devinit dwc3_omap_register_phys(struct dwc3_omap *omap)
+static int dwc3_omap_register_phys(struct dwc3_omap *omap)
 {
         struct nop_usb_xceiv_platform_data pdata;
         struct platform_device  *pdev;
@@ -262,7 +262,7 @@ static irqreturn_t dwc3_omap_interrupt(int irq, void *_omap)
         return IRQ_HANDLED;
 }
 
-static int __devinit dwc3_omap_probe(struct platform_device *pdev)
+static int dwc3_omap_probe(struct platform_device *pdev)
 {
         struct dwc3_omap_data   *pdata = pdev->dev.platform_data;
         struct device_node      *node = pdev->dev.of_node;
@@ -272,7 +272,6 @@ static int __devinit dwc3_omap_probe(struct platform_device *pdev)
         struct resource         *res;
         struct device           *dev = &pdev->dev;
 
-        int                     devid;
         int                     size;
         int                     ret = -ENOMEM;
         int                     irq;
@@ -315,14 +314,10 @@ static int __devinit dwc3_omap_probe(struct platform_device *pdev)
                 return ret;
         }
 
-        devid = dwc3_get_device_id();
-        if (devid < 0)
-                return -ENODEV;
-
-        dwc3 = platform_device_alloc("dwc3", devid);
+        dwc3 = platform_device_alloc("dwc3", PLATFORM_DEVID_AUTO);
         if (!dwc3) {
                 dev_err(dev, "couldn't allocate dwc3 device\n");
-                goto err1;
+                return -ENOMEM;
         }
 
         context = devm_kzalloc(dev, resource_size(res), GFP_KERNEL);
@@ -423,23 +418,16 @@ static int __devinit dwc3_omap_probe(struct platform_device *pdev)
 
 err2:
         platform_device_put(dwc3);
-
-err1:
-        dwc3_put_device_id(devid);
-
         return ret;
 }
 
-static int __devexit dwc3_omap_remove(struct platform_device *pdev)
+static int dwc3_omap_remove(struct platform_device *pdev)
 {
         struct dwc3_omap        *omap = platform_get_drvdata(pdev);
 
         platform_device_unregister(omap->dwc3);
         platform_device_unregister(omap->usb2_phy);
         platform_device_unregister(omap->usb3_phy);
-
-        dwc3_put_device_id(omap->dwc3->id);
-
         return 0;
 }
 
@@ -453,7 +441,7 @@ MODULE_DEVICE_TABLE(of, of_dwc3_matach);
 
 static struct platform_driver dwc3_omap_driver = {
         .probe          = dwc3_omap_probe,
-        .remove         = __devexit_p(dwc3_omap_remove),
+        .remove         = dwc3_omap_remove,
         .driver         = {
                 .name   = "omap-dwc3",
                 .of_match_table = of_dwc3_matach,
diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c
index 94f550e37f98..7d70f44567d2 100644
--- a/drivers/usb/dwc3/dwc3-pci.c
+++ b/drivers/usb/dwc3/dwc3-pci.c
@@ -58,7 +58,7 @@ struct dwc3_pci {
         struct platform_device  *usb3_phy;
 };
 
-static int __devinit dwc3_pci_register_phys(struct dwc3_pci *glue)
+static int dwc3_pci_register_phys(struct dwc3_pci *glue)
 {
         struct nop_usb_xceiv_platform_data pdata;
         struct platform_device  *pdev;
@@ -112,14 +112,13 @@ err1:
         return ret;
 }
 
-static int __devinit dwc3_pci_probe(struct pci_dev *pci,
+static int dwc3_pci_probe(struct pci_dev *pci,
                 const struct pci_device_id *id)
 {
         struct resource         res[2];
         struct platform_device  *dwc3;
         struct dwc3_pci         *glue;
         int                     ret = -ENOMEM;
-        int                     devid;
         struct device           *dev = &pci->dev;
 
         glue = devm_kzalloc(dev, sizeof(*glue), GFP_KERNEL);
@@ -145,13 +144,7 @@ static int __devinit dwc3_pci_probe(struct pci_dev *pci,
                 return ret;
         }
 
-        devid = dwc3_get_device_id();
-        if (devid < 0) {
-                ret = -ENOMEM;
-                goto err1;
-        }
-
-        dwc3 = platform_device_alloc("dwc3", devid);
+        dwc3 = platform_device_alloc("dwc3", PLATFORM_DEVID_AUTO);
         if (!dwc3) {
                 dev_err(dev, "couldn't allocate dwc3 device\n");
                 ret = -ENOMEM;
@@ -172,7 +165,7 @@ static int __devinit dwc3_pci_probe(struct pci_dev *pci,
         ret = platform_device_add_resources(dwc3, res, ARRAY_SIZE(res));
         if (ret) {
                 dev_err(dev, "couldn't add resources to dwc3 device\n");
-                goto err2;
+                goto err1;
         }
 
         pci_set_drvdata(pci, glue);
@@ -195,23 +188,18 @@ static int __devinit dwc3_pci_probe(struct pci_dev *pci,
 err3:
         pci_set_drvdata(pci, NULL);
         platform_device_put(dwc3);
-
-err2:
-        dwc3_put_device_id(devid);
-
 err1:
         pci_disable_device(pci);
 
         return ret;
 }
 
-static void __devexit dwc3_pci_remove(struct pci_dev *pci)
+static void dwc3_pci_remove(struct pci_dev *pci)
 {
         struct dwc3_pci *glue = pci_get_drvdata(pci);
 
         platform_device_unregister(glue->usb2_phy);
         platform_device_unregister(glue->usb3_phy);
-        dwc3_put_device_id(glue->dwc3->id);
         platform_device_unregister(glue->dwc3);
         pci_set_drvdata(pci, NULL);
         pci_disable_device(pci);
@@ -230,7 +218,7 @@ static struct pci_driver dwc3_pci_driver = {
         .name           = "dwc3-pci",
         .id_table       = dwc3_pci_id_table,
         .probe          = dwc3_pci_probe,
-        .remove         = __devexit_p(dwc3_pci_remove),
+        .remove         = dwc3_pci_remove,
 };
 
 MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>");
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 7b7deddf6a52..2e43b332aae8 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -1579,7 +1579,7 @@ static const struct usb_gadget_ops dwc3_gadget_ops = {
 
 /* -------------------------------------------------------------------------- */
 
-static int __devinit dwc3_gadget_init_endpoints(struct dwc3 *dwc)
+static int dwc3_gadget_init_endpoints(struct dwc3 *dwc)
 {
         struct dwc3_ep                  *dep;
         u8                              epnum;
@@ -2374,7 +2374,7 @@ static irqreturn_t dwc3_interrupt(int irq, void *_dwc)
  *
  * Returns 0 on success otherwise negative errno.
  */
-int __devinit dwc3_gadget_init(struct dwc3 *dwc)
+int dwc3_gadget_init(struct dwc3 *dwc)
 {
         u32                                     reg;
         int                                     ret;
diff --git a/drivers/usb/early/ehci-dbgp.c b/drivers/usb/early/ehci-dbgp.c
index 4bfa78af379c..5e29ddeb4d33 100644
--- a/drivers/usb/early/ehci-dbgp.c
+++ b/drivers/usb/early/ehci-dbgp.c
@@ -974,7 +974,7 @@ struct console early_dbgp_console = {
         .index =        -1,
 };
 
-#if IS_ENABLED(CONFIG_USB_EHCI_HCD)
+#if IS_ENABLED(CONFIG_USB)
 int dbgp_reset_prep(struct usb_hcd *hcd)
 {
         int ret = xen_dbgp_reset_prep(hcd);
@@ -1008,7 +1008,7 @@ int dbgp_external_startup(struct usb_hcd *hcd)
         return xen_dbgp_external_startup(hcd) ?: _dbgp_external_startup();
 }
 EXPORT_SYMBOL_GPL(dbgp_external_startup);
-#endif /* USB_EHCI_HCD */
+#endif /* USB */
 
 #ifdef CONFIG_KGDB
 
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index e0ff51b89529..14625fd2cecd 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -721,31 +721,6 @@ config USB_FUNCTIONFS_GENERIC
           Include a configuration with the Function Filesystem alone with
           no Ethernet interface.
 
-config USB_FILE_STORAGE
-        tristate "File-backed Storage Gadget (DEPRECATED)"
-        depends on BLOCK
-        help
-          The File-backed Storage Gadget acts as a USB Mass Storage
-          disk drive.  As its storage repository it can use a regular
-          file or a block device (in much the same way as the "loop"
-          device driver), specified as a module parameter.
-
-          Say "y" to link the driver statically, or "m" to build a
-          dynamically linked module called "g_file_storage".
-
-          NOTE: This driver is deprecated.  Its replacement is the
-          Mass Storage Gadget.
-
-config USB_FILE_STORAGE_TEST
-        bool "File-backed Storage Gadget testing version"
-        depends on USB_FILE_STORAGE
-        default n
-        help
-          Say "y" to generate the larger testing version of the
-          File-backed Storage Gadget, useful for probing the
-          behavior of USB Mass Storage hosts.  Not needed for
-          normal operation.
-
 config USB_MASS_STORAGE
         tristate "Mass Storage Gadget"
         depends on BLOCK
@@ -756,8 +731,8 @@ config USB_MASS_STORAGE
           device (in much the same way as the "loop" device driver),
           specified as a module parameter or sysfs option.
 
-          This driver is an updated replacement for the deprecated
-          File-backed Storage Gadget (g_file_storage).
+          This driver is a replacement for now removed File-backed
+          Storage Gadget (g_file_storage).
 
           Say "y" to link the driver statically, or "m" to build
           a dynamically linked module called "g_mass_storage".
diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
index 307be5fa824c..8b4acfd92aa3 100644
--- a/drivers/usb/gadget/Makefile
+++ b/drivers/usb/gadget/Makefile
@@ -44,7 +44,6 @@ g_ether-y			:= ether.o
 g_serial-y                      := serial.o
 g_midi-y                        := gmidi.o
 gadgetfs-y                      := inode.o
-g_file_storage-y                := file_storage.o
 g_mass_storage-y                := mass_storage.o
 g_printer-y                     := printer.o
 g_cdc-y                         := cdc2.o
@@ -62,7 +61,6 @@ obj-$(CONFIG_USB_AUDIO)		+= g_audio.o
 obj-$(CONFIG_USB_ETH)           += g_ether.o
 obj-$(CONFIG_USB_GADGETFS)      += gadgetfs.o
 obj-$(CONFIG_USB_FUNCTIONFS)    += g_ffs.o
-obj-$(CONFIG_USB_FILE_STORAGE)  += g_file_storage.o
 obj-$(CONFIG_USB_MASS_STORAGE)  += g_mass_storage.o
 obj-$(CONFIG_USB_G_SERIAL)      += g_serial.o
 obj-$(CONFIG_USB_G_PRINTER)     += g_printer.o
diff --git a/drivers/usb/gadget/amd5536udc.c b/drivers/usb/gadget/amd5536udc.c
index fc0ec5e0d58e..d9f6b9372491 100644
--- a/drivers/usb/gadget/amd5536udc.c
+++ b/drivers/usb/gadget/amd5536udc.c
@@ -3231,7 +3231,7 @@ static int udc_pci_probe(
         }
 
         if (!pdev->irq) {
-                dev_err(&dev->pdev->dev, "irq not set\n");
+                dev_err(&pdev->dev, "irq not set\n");
                 kfree(dev);
                 dev = NULL;
                 retval = -ENODEV;
@@ -3250,7 +3250,7 @@ static int udc_pci_probe(
         dev->txfifo = (u32 __iomem *)(dev->virt_addr + UDC_TXFIFO_ADDR);
 
         if (request_irq(pdev->irq, udc_irq, IRQF_SHARED, name, dev) != 0) {
-                dev_dbg(&dev->pdev->dev, "request_irq(%d) fail\n", pdev->irq);
+                dev_dbg(&pdev->dev, "request_irq(%d) fail\n", pdev->irq);
                 kfree(dev);
                 dev = NULL;
                 retval = -EBUSY;
diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
index 89d90b5fb787..f4a21f6f081f 100644
--- a/drivers/usb/gadget/at91_udc.c
+++ b/drivers/usb/gadget/at91_udc.c
@@ -31,6 +31,7 @@
 #include <linux/usb/gadget.h>
 #include <linux/of.h>
 #include <linux/of_gpio.h>
+#include <linux/platform_data/atmel.h>
 
 #include <asm/byteorder.h>
 #include <mach/hardware.h>
@@ -38,7 +39,6 @@
 #include <asm/irq.h>
 #include <asm/gpio.h>
 
-#include <mach/board.h>
 #include <mach/cpu.h>
 #include <mach/at91sam9261_matrix.h>
 #include <mach/at91_matrix.h>
@@ -51,7 +51,7 @@
  * full speed USB controllers, including the at91rm9200 (arm920T, with MMU),
  * at91sam926x (arm926ejs, with MMU), and several no-mmu versions.
  *
- * This driver expects the board has been wired with two GPIOs suppporting
+ * This driver expects the board has been wired with two GPIOs supporting
  * a VBUS sensing IRQ, and a D+ pullup.  (They may be omitted, but the
  * testing hasn't covered such cases.)
  *
@@ -1673,7 +1673,7 @@ static void at91udc_shutdown(struct platform_device *dev)
         spin_unlock_irqrestore(&udc->lock, flags);
 }
 
-static void __devinit at91udc_of_init(struct at91_udc *udc,
+static void at91udc_of_init(struct at91_udc *udc,
                                      struct device_node *np)
 {
         struct at91_udc_data *board = &udc->board;
@@ -1693,7 +1693,7 @@ static void __devinit at91udc_of_init(struct at91_udc *udc,
         board->pullup_active_low = (flags & OF_GPIO_ACTIVE_LOW) ? 1 : 0;
 }
 
-static int __devinit at91udc_probe(struct platform_device *pdev)
+static int at91udc_probe(struct platform_device *pdev)
 {
         struct device   *dev = &pdev->dev;
         struct at91_udc *udc;
diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c
index 9a9bced813ed..a7aed84d98c9 100644
--- a/drivers/usb/gadget/atmel_usba_udc.c
+++ b/drivers/usb/gadget/atmel_usba_udc.c
@@ -21,9 +21,9 @@
 #include <linux/usb/gadget.h>
 #include <linux/usb/atmel_usba_udc.h>
 #include <linux/delay.h>
+#include <linux/platform_data/atmel.h>
 
 #include <asm/gpio.h>
-#include <mach/board.h>
 
 #include "atmel_usba_udc.h"
 
diff --git a/drivers/usb/gadget/bcm63xx_udc.c b/drivers/usb/gadget/bcm63xx_udc.c
index 9ca792224cd4..47a49931361e 100644
--- a/drivers/usb/gadget/bcm63xx_udc.c
+++ b/drivers/usb/gadget/bcm63xx_udc.c
@@ -2323,7 +2323,7 @@ static void bcm63xx_udc_gadget_release(struct device *dev)
  * Note that platform data is required, because pd.port_no varies from chip
  * to chip and is used to switch the correct USB port to device mode.
  */
-static int __devinit bcm63xx_udc_probe(struct platform_device *pdev)
+static int bcm63xx_udc_probe(struct platform_device *pdev)
 {
         struct device *dev = &pdev->dev;
         struct bcm63xx_usbd_platform_data *pd = dev->platform_data;
@@ -2433,7 +2433,7 @@ out_uninit:
  * bcm63xx_udc_remove - Remove the device from the system.
  * @pdev: Platform device struct from the bcm63xx BSP code.
  */
-static int __devexit bcm63xx_udc_remove(struct platform_device *pdev)
+static int bcm63xx_udc_remove(struct platform_device *pdev)
 {
         struct bcm63xx_udc *udc = platform_get_drvdata(pdev);
 
@@ -2450,7 +2450,7 @@ static int __devexit bcm63xx_udc_remove(struct platform_device *pdev)
 
 static struct platform_driver bcm63xx_udc_driver = {
         .probe          = bcm63xx_udc_probe,
-        .remove         = __devexit_p(bcm63xx_udc_remove),
+        .remove         = bcm63xx_udc_remove,
         .driver         = {
                 .name   = DRV_MODULE_NAME,
                 .owner  = THIS_MODULE,
diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index 957f973dd96a..2a6bfe759c29 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -107,7 +107,7 @@ int config_ep_by_speed(struct usb_gadget *g,
                 }
                 /* else: fall through */
         default:
-                speed_desc = f->descriptors;
+                speed_desc = f->fs_descriptors;
         }
         /* find descriptors */
         for_each_ep_desc(speed_desc, d_spd) {
@@ -200,7 +200,7 @@ int usb_add_function(struct usb_configuration *config,
          * as full speed ... it's the function drivers that will need
          * to avoid bulk and ISO transfers.
          */
-        if (!config->fullspeed && function->descriptors)
+        if (!config->fullspeed && function->fs_descriptors)
                 config->fullspeed = true;
         if (!config->highspeed && function->hs_descriptors)
                 config->highspeed = true;
@@ -363,7 +363,7 @@ static int config_buf(struct usb_configuration *config,
                         descriptors = f->hs_descriptors;
                         break;
                 default:
-                        descriptors = f->descriptors;
+                        descriptors = f->fs_descriptors;
                 }
 
                 if (!descriptors)
@@ -620,7 +620,7 @@ static int set_config(struct usb_composite_dev *cdev,
                         descriptors = f->hs_descriptors;
                         break;
                 default:
-                        descriptors = f->descriptors;
+                        descriptors = f->fs_descriptors;
                 }
 
                 for (; *descriptors; ++descriptors) {
diff --git a/drivers/usb/gadget/config.c b/drivers/usb/gadget/config.c
index e3a98929d346..34e12fc52c23 100644
--- a/drivers/usb/gadget/config.c
+++ b/drivers/usb/gadget/config.c
@@ -19,7 +19,7 @@
 
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
-
+#include <linux/usb/composite.h>
 
 /**
  * usb_descriptor_fillbuf - fill buffer with descriptors
@@ -158,3 +158,40 @@ usb_copy_descriptors(struct usb_descriptor_header **src)
         return ret;
 }
 EXPORT_SYMBOL_GPL(usb_copy_descriptors);
+
+int usb_assign_descriptors(struct usb_function *f,
+                struct usb_descriptor_header **fs,
+                struct usb_descriptor_header **hs,
+                struct usb_descriptor_header **ss)
+{
+        struct usb_gadget *g = f->config->cdev->gadget;
+
+        if (fs) {
+                f->fs_descriptors = usb_copy_descriptors(fs);
+                if (!f->fs_descriptors)
+                        goto err;
+        }
+        if (hs && gadget_is_dualspeed(g)) {
+                f->hs_descriptors = usb_copy_descriptors(hs);
+                if (!f->hs_descriptors)
+                        goto err;
+        }
+        if (ss && gadget_is_superspeed(g)) {
+                f->ss_descriptors = usb_copy_descriptors(ss);
+                if (!f->ss_descriptors)
+                        goto err;
+        }
+        return 0;
+err:
+        usb_free_all_descriptors(f);
+        return -ENOMEM;
+}
+EXPORT_SYMBOL_GPL(usb_assign_descriptors);
+
+void usb_free_all_descriptors(struct usb_function *f)
+{
+        usb_free_descriptors(f->fs_descriptors);
+        usb_free_descriptors(f->hs_descriptors);
+        usb_free_descriptors(f->ss_descriptors);
+}
+EXPORT_SYMBOL_GPL(usb_free_all_descriptors);
diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c
index 0f7541be28f3..8cf0c0f6fa1f 100644
--- a/drivers/usb/gadget/dummy_hcd.c
+++ b/drivers/usb/gadget/dummy_hcd.c
@@ -63,16 +63,20 @@ MODULE_LICENSE("GPL");
 struct dummy_hcd_module_parameters {
         bool is_super_speed;
         bool is_high_speed;
+        unsigned int num;
 };
 
 static struct dummy_hcd_module_parameters mod_data = {
         .is_super_speed = false,
         .is_high_speed = true,
+        .num = 1,
 };
 module_param_named(is_super_speed, mod_data.is_super_speed, bool, S_IRUGO);
 MODULE_PARM_DESC(is_super_speed, "true to simulate SuperSpeed connection");
 module_param_named(is_high_speed, mod_data.is_high_speed, bool, S_IRUGO);
 MODULE_PARM_DESC(is_high_speed, "true to simulate HighSpeed connection");
+module_param_named(num, mod_data.num, uint, S_IRUGO);
+MODULE_PARM_DESC(num, "number of emulated controllers");
 /*-------------------------------------------------------------------------*/
 
 /* gadget side driver data structres */
@@ -126,10 +130,7 @@ static const char ep0name[] = "ep0";
 static const char *const ep_name[] = {
         ep0name,                                /* everyone has ep0 */
 
-        /* act like a net2280: high speed, six configurable endpoints */
-        "ep-a", "ep-b", "ep-c", "ep-d", "ep-e", "ep-f",
-
-        /* or like pxa250: fifteen fixed function endpoints */
+        /* act like a pxa250: fifteen fixed function endpoints */
         "ep1in-bulk", "ep2out-bulk", "ep3in-iso", "ep4out-iso", "ep5in-int",
         "ep6in-bulk", "ep7out-bulk", "ep8in-iso", "ep9out-iso", "ep10in-int",
         "ep11in-bulk", "ep12out-bulk", "ep13in-iso", "ep14out-iso",
@@ -137,6 +138,10 @@ static const char *const ep_name[] = {
 
         /* or like sa1100: two fixed function endpoints */
         "ep1out-bulk", "ep2in-bulk",
+
+        /* and now some generic EPs so we have enough in multi config */
+        "ep3out", "ep4in", "ep5out", "ep6out", "ep7in", "ep8out", "ep9in",
+        "ep10out", "ep11out", "ep12in", "ep13out", "ep14in", "ep15out",
 };
 #define DUMMY_ENDPOINTS ARRAY_SIZE(ep_name)
 
@@ -238,8 +243,6 @@ static inline struct dummy *gadget_dev_to_dummy(struct device *dev)
         return container_of(dev, struct dummy, gadget.dev);
 }
 
-static struct dummy                     the_controller;
-
 /*-------------------------------------------------------------------------*/
 
 /* SLAVE/GADGET SIDE UTILITY ROUTINES */
@@ -973,9 +976,10 @@ static void init_dummy_udc_hw(struct dummy *dum)
 
 static int dummy_udc_probe(struct platform_device *pdev)
 {
-        struct dummy    *dum = &the_controller;
+        struct dummy    *dum;
         int             rc;
 
+        dum = *((void **)dev_get_platdata(&pdev->dev));
         dum->gadget.name = gadget_name;
         dum->gadget.ops = &dummy_ops;
         dum->gadget.max_speed = USB_SPEED_SUPER;
@@ -2398,10 +2402,13 @@ static int dummy_h_get_frame(struct usb_hcd *hcd)
 
 static int dummy_setup(struct usb_hcd *hcd)
 {
+        struct dummy *dum;
+
+        dum = *((void **)dev_get_platdata(hcd->self.controller));
         hcd->self.sg_tablesize = ~0;
         if (usb_hcd_is_primary_hcd(hcd)) {
-                the_controller.hs_hcd = hcd_to_dummy_hcd(hcd);
-                the_controller.hs_hcd->dum = &the_controller;
+                dum->hs_hcd = hcd_to_dummy_hcd(hcd);
+                dum->hs_hcd->dum = dum;
                 /*
                  * Mark the first roothub as being USB 2.0.
                  * The USB 3.0 roothub will be registered later by
@@ -2410,8 +2417,8 @@ static int dummy_setup(struct usb_hcd *hcd)
                 hcd->speed = HCD_USB2;
                 hcd->self.root_hub->speed = USB_SPEED_HIGH;
         } else {
-                the_controller.ss_hcd = hcd_to_dummy_hcd(hcd);
-                the_controller.ss_hcd->dum = &the_controller;
+                dum->ss_hcd = hcd_to_dummy_hcd(hcd);
+                dum->ss_hcd->dum = dum;
                 hcd->speed = HCD_USB3;
                 hcd->self.root_hub->speed = USB_SPEED_SUPER;
         }
@@ -2524,11 +2531,13 @@ static struct hc_driver dummy_hcd = {
 
 static int dummy_hcd_probe(struct platform_device *pdev)
 {
+        struct dummy            *dum;
         struct usb_hcd          *hs_hcd;
         struct usb_hcd          *ss_hcd;
         int                     retval;
 
         dev_info(&pdev->dev, "%s, driver " DRIVER_VERSION "\n", driver_desc);
+        dum = *((void **)dev_get_platdata(&pdev->dev));
 
         if (!mod_data.is_super_speed)
                 dummy_hcd.flags = HCD_USB2;
@@ -2561,7 +2570,7 @@ dealloc_usb2_hcd:
         usb_remove_hcd(hs_hcd);
 put_usb2_hcd:
         usb_put_hcd(hs_hcd);
-        the_controller.hs_hcd = the_controller.ss_hcd = NULL;
+        dum->hs_hcd = dum->ss_hcd = NULL;
         return retval;
 }
 
@@ -2579,8 +2588,8 @@ static int dummy_hcd_remove(struct platform_device *pdev)
         usb_remove_hcd(dummy_hcd_to_hcd(dum->hs_hcd));
         usb_put_hcd(dummy_hcd_to_hcd(dum->hs_hcd));
 
-        the_controller.hs_hcd = NULL;
-        the_controller.ss_hcd = NULL;
+        dum->hs_hcd = NULL;
+        dum->ss_hcd = NULL;
 
         return 0;
 }
@@ -2627,13 +2636,15 @@ static struct platform_driver dummy_hcd_driver = {
 };
 
 /*-------------------------------------------------------------------------*/
-
-static struct platform_device *the_udc_pdev;
-static struct platform_device *the_hcd_pdev;
+#define MAX_NUM_UDC     2
+static struct platform_device *the_udc_pdev[MAX_NUM_UDC];
+static struct platform_device *the_hcd_pdev[MAX_NUM_UDC];
 
 static int __init init(void)
 {
         int     retval = -ENOMEM;
+        int     i;
+        struct  dummy *dum[MAX_NUM_UDC];
 
         if (usb_disabled())
                 return -ENODEV;
@@ -2641,65 +2652,129 @@ static int __init init(void)
         if (!mod_data.is_high_speed && mod_data.is_super_speed)
                 return -EINVAL;
 
-        the_hcd_pdev = platform_device_alloc(driver_name, -1);
-        if (!the_hcd_pdev)
-                return retval;
-        the_udc_pdev = platform_device_alloc(gadget_name, -1);
-        if (!the_udc_pdev)
-                goto err_alloc_udc;
+        if (mod_data.num < 1 || mod_data.num > MAX_NUM_UDC) {
+                pr_err("Number of emulated UDC must be in range of 1…%d\n",
+                                MAX_NUM_UDC);
+                return -EINVAL;
+        }
+
+        for (i = 0; i < mod_data.num; i++) {
+                the_hcd_pdev[i] = platform_device_alloc(driver_name, i);
+                if (!the_hcd_pdev[i]) {
+                        i--;
+                        while (i >= 0)
+                                platform_device_put(the_hcd_pdev[i--]);
+                        return retval;
+                }
+        }
+        for (i = 0; i < mod_data.num; i++) {
+                the_udc_pdev[i] = platform_device_alloc(gadget_name, i);
+                if (!the_udc_pdev[i]) {
+                        i--;
+                        while (i >= 0)
+                                platform_device_put(the_udc_pdev[i--]);
+                        goto err_alloc_udc;
+                }
+        }
+        for (i = 0; i < mod_data.num; i++) {
+                dum[i] = kzalloc(sizeof(struct dummy), GFP_KERNEL);
+                if (!dum[i])
+                        goto err_add_pdata;
+                retval = platform_device_add_data(the_hcd_pdev[i], &dum[i],
+                                sizeof(void *));
+                if (retval)
+                        goto err_add_pdata;
+                retval = platform_device_add_data(the_udc_pdev[i], &dum[i],
+                                sizeof(void *));
+                if (retval)
+                        goto err_add_pdata;
+        }
 
         retval = platform_driver_register(&dummy_hcd_driver);
         if (retval < 0)
-                goto err_register_hcd_driver;
+                goto err_add_pdata;
         retval = platform_driver_register(&dummy_udc_driver);
         if (retval < 0)
                 goto err_register_udc_driver;
 
-        retval = platform_device_add(the_hcd_pdev);
-        if (retval < 0)
-                goto err_add_hcd;
-        if (!the_controller.hs_hcd ||
-            (!the_controller.ss_hcd && mod_data.is_super_speed)) {
-                /*
-                 * The hcd was added successfully but its probe function failed
-                 * for some reason.
-                 */
-                retval = -EINVAL;
-                goto err_add_udc;
+        for (i = 0; i < mod_data.num; i++) {
+                retval = platform_device_add(the_hcd_pdev[i]);
+                if (retval < 0) {
+                        i--;
+                        while (i >= 0)
+                                platform_device_del(the_hcd_pdev[i--]);
+                        goto err_add_hcd;
+                }
         }
-        retval = platform_device_add(the_udc_pdev);
-        if (retval < 0)
-                goto err_add_udc;
-        if (!platform_get_drvdata(the_udc_pdev)) {
-                /*
-                 * The udc was added successfully but its probe function failed
-                 * for some reason.
-                 */
-                retval = -EINVAL;
-                goto err_probe_udc;
+        for (i = 0; i < mod_data.num; i++) {
+                if (!dum[i]->hs_hcd ||
+                                (!dum[i]->ss_hcd && mod_data.is_super_speed)) {
+                        /*
+                         * The hcd was added successfully but its probe
+                         * function failed for some reason.
+                         */
+                        retval = -EINVAL;
+                        goto err_add_udc;
+                }
+        }
+
+        for (i = 0; i < mod_data.num; i++) {
+                retval = platform_device_add(the_udc_pdev[i]);
+                if (retval < 0) {
+                        i--;
+                        while (i >= 0)
+                                platform_device_del(the_udc_pdev[i]);
+                        goto err_add_udc;
+                }
+        }
+
+        for (i = 0; i < mod_data.num; i++) {
+                if (!platform_get_drvdata(the_udc_pdev[i])) {
+                        /*
+                         * The udc was added successfully but its probe
+                         * function failed for some reason.
+                         */
+                        retval = -EINVAL;
+                        goto err_probe_udc;
+                }
         }
         return retval;
 
 err_probe_udc:
-        platform_device_del(the_udc_pdev);
+        for (i = 0; i < mod_data.num; i++)
+                platform_device_del(the_udc_pdev[i]);
 err_add_udc:
-        platform_device_del(the_hcd_pdev);
+        for (i = 0; i < mod_data.num; i++)
+                platform_device_del(the_hcd_pdev[i]);
 err_add_hcd:
         platform_driver_unregister(&dummy_udc_driver);
 err_register_udc_driver:
         platform_driver_unregister(&dummy_hcd_driver);
-err_register_hcd_driver:
-        platform_device_put(the_udc_pdev);
+err_add_pdata:
+        for (i = 0; i < mod_data.num; i++)
+                kfree(dum[i]);
+        for (i = 0; i < mod_data.num; i++)
+                platform_device_put(the_udc_pdev[i]);
 err_alloc_udc:
-        platform_device_put(the_hcd_pdev);
+        for (i = 0; i < mod_data.num; i++)
+                platform_device_put(the_hcd_pdev[i]);
         return retval;
 }
 module_init(init);
 
 static void __exit cleanup(void)
 {
-        platform_device_unregister(the_udc_pdev);
-        platform_device_unregister(the_hcd_pdev);
+        int i;
+
+        for (i = 0; i < mod_data.num; i++) {
+                struct dummy *dum;
+
+                dum = *((void **)dev_get_platdata(&the_udc_pdev[i]->dev));
+
+                platform_device_unregister(the_udc_pdev[i]);
+                platform_device_unregister(the_hcd_pdev[i]);
+                kfree(dum);
+        }
         platform_driver_unregister(&dummy_udc_driver);
         platform_driver_unregister(&dummy_hcd_driver);
 }
diff --git a/drivers/usb/gadget/f_acm.c b/drivers/usb/gadget/f_acm.c
index d672250a61fa..549174466c21 100644
--- a/drivers/usb/gadget/f_acm.c
+++ b/drivers/usb/gadget/f_acm.c
@@ -87,7 +87,7 @@ static inline struct f_acm *port_to_acm(struct gserial *p)
 
 /* notification endpoint uses smallish and infrequent fixed-size messages */
 
-#define GS_LOG2_NOTIFY_INTERVAL         5       /* 1 << 5 == 32 msec */
+#define GS_NOTIFY_INTERVAL_MS           32
 #define GS_NOTIFY_MAXPACKET             10      /* notification + 2 bytes */
 
 /* interface and class descriptors: */
@@ -167,7 +167,7 @@ static struct usb_endpoint_descriptor acm_fs_notify_desc = {
         .bEndpointAddress =     USB_DIR_IN,
         .bmAttributes =         USB_ENDPOINT_XFER_INT,
         .wMaxPacketSize =       cpu_to_le16(GS_NOTIFY_MAXPACKET),
-        .bInterval =            1 << GS_LOG2_NOTIFY_INTERVAL,
+        .bInterval =            GS_NOTIFY_INTERVAL_MS,
 };
 
 static struct usb_endpoint_descriptor acm_fs_in_desc = {
@@ -199,14 +199,13 @@ static struct usb_descriptor_header *acm_fs_function[] = {
 };
 
 /* high speed support: */
-
 static struct usb_endpoint_descriptor acm_hs_notify_desc = {
         .bLength =              USB_DT_ENDPOINT_SIZE,
         .bDescriptorType =      USB_DT_ENDPOINT,
         .bEndpointAddress =     USB_DIR_IN,
         .bmAttributes =         USB_ENDPOINT_XFER_INT,
         .wMaxPacketSize =       cpu_to_le16(GS_NOTIFY_MAXPACKET),
-        .bInterval =            GS_LOG2_NOTIFY_INTERVAL+4,
+        .bInterval =            USB_MS_TO_HS_INTERVAL(GS_NOTIFY_INTERVAL_MS),
 };
 
 static struct usb_endpoint_descriptor acm_hs_in_desc = {
@@ -659,37 +658,22 @@ acm_bind(struct usb_configuration *c, struct usb_function *f)
         acm->notify_req->complete = acm_cdc_notify_complete;
         acm->notify_req->context = acm;
 
-        /* copy descriptors */
-        f->descriptors = usb_copy_descriptors(acm_fs_function);
-        if (!f->descriptors)
-                goto fail;
-
         /* support all relevant hardware speeds... we expect that when
          * hardware is dual speed, all bulk-capable endpoints work at
          * both speeds
          */
-        if (gadget_is_dualspeed(c->cdev->gadget)) {
-                acm_hs_in_desc.bEndpointAddress =
-                                acm_fs_in_desc.bEndpointAddress;
-                acm_hs_out_desc.bEndpointAddress =
-                                acm_fs_out_desc.bEndpointAddress;
-                acm_hs_notify_desc.bEndpointAddress =
-                                acm_fs_notify_desc.bEndpointAddress;
-
-                /* copy descriptors */
-                f->hs_descriptors = usb_copy_descriptors(acm_hs_function);
-        }
-        if (gadget_is_superspeed(c->cdev->gadget)) {
-                acm_ss_in_desc.bEndpointAddress =
-                        acm_fs_in_desc.bEndpointAddress;
-                acm_ss_out_desc.bEndpointAddress =
-                        acm_fs_out_desc.bEndpointAddress;
-
-                /* copy descriptors, and track endpoint copies */
-                f->ss_descriptors = usb_copy_descriptors(acm_ss_function);
-                if (!f->ss_descriptors)
-                        goto fail;
-        }
+        acm_hs_in_desc.bEndpointAddress = acm_fs_in_desc.bEndpointAddress;
+        acm_hs_out_desc.bEndpointAddress = acm_fs_out_desc.bEndpointAddress;
+        acm_hs_notify_desc.bEndpointAddress =
+                acm_fs_notify_desc.bEndpointAddress;
+
+        acm_ss_in_desc.bEndpointAddress = acm_fs_in_desc.bEndpointAddress;
+        acm_ss_out_desc.bEndpointAddress = acm_fs_out_desc.bEndpointAddress;
+
+        status = usb_assign_descriptors(f, acm_fs_function, acm_hs_function,
+                        acm_ss_function);
+        if (status)
+                goto fail;
 
         DBG(cdev, "acm ttyGS%d: %s speed IN/%s OUT/%s NOTIFY/%s\n",
                         acm->port_num,
@@ -721,11 +705,8 @@ acm_unbind(struct usb_configuration *c, struct usb_function *f)
 {
         struct f_acm            *acm = func_to_acm(f);
 
-        if (gadget_is_dualspeed(c->cdev->gadget))
-                usb_free_descriptors(f->hs_descriptors);
-        if (gadget_is_superspeed(c->cdev->gadget))
-                usb_free_descriptors(f->ss_descriptors);
-        usb_free_descriptors(f->descriptors);
+        acm_string_defs[0].id = 0;
+        usb_free_all_descriptors(f);
         gs_free_req(acm->notify, acm->notify_req);
         kfree(acm);
 }
@@ -762,27 +743,15 @@ int acm_bind_config(struct usb_configuration *c, u8 port_num)
          */
 
         /* maybe allocate device-global string IDs, and patch descriptors */
-        if (acm_string_defs[ACM_CTRL_IDX].id == 0) {
-                status = usb_string_id(c->cdev);
+        if (acm_string_defs[0].id == 0) {
+                status = usb_string_ids_tab(c->cdev, acm_string_defs);
                 if (status < 0)
                         return status;
-                acm_string_defs[ACM_CTRL_IDX].id = status;
-
-                acm_control_interface_desc.iInterface = status;
-
-                status = usb_string_id(c->cdev);
-                if (status < 0)
-                        return status;
-                acm_string_defs[ACM_DATA_IDX].id = status;
-
-                acm_data_interface_desc.iInterface = status;
-
-                status = usb_string_id(c->cdev);
-                if (status < 0)
-                        return status;
-                acm_string_defs[ACM_IAD_IDX].id = status;
-
-                acm_iad_descriptor.iFunction = status;
+                acm_control_interface_desc.iInterface =
+                        acm_string_defs[ACM_CTRL_IDX].id;
+                acm_data_interface_desc.iInterface =
+                        acm_string_defs[ACM_DATA_IDX].id;
+                acm_iad_descriptor.iFunction = acm_string_defs[ACM_IAD_IDX].id;
         }
 
         /* allocate and initialize one new instance */
diff --git a/drivers/usb/gadget/f_ecm.c b/drivers/usb/gadget/f_ecm.c
index 95bc94f8e570..83420a310fb7 100644
--- a/drivers/usb/gadget/f_ecm.c
+++ b/drivers/usb/gadget/f_ecm.c
@@ -91,7 +91,7 @@ static inline unsigned ecm_bitrate(struct usb_gadget *g)
  * encapsulated commands (vendor-specific, using control-OUT).
  */
 
-#define LOG2_STATUS_INTERVAL_MSEC       5       /* 1 << 5 == 32 msec */
+#define ECM_STATUS_INTERVAL_MS          32
 #define ECM_STATUS_BYTECOUNT            16      /* 8 byte header + data */
 
 
@@ -192,7 +192,7 @@ static struct usb_endpoint_descriptor fs_ecm_notify_desc = {
         .bEndpointAddress =     USB_DIR_IN,
         .bmAttributes =         USB_ENDPOINT_XFER_INT,
         .wMaxPacketSize =       cpu_to_le16(ECM_STATUS_BYTECOUNT),
-        .bInterval =            1 << LOG2_STATUS_INTERVAL_MSEC,
+        .bInterval =            ECM_STATUS_INTERVAL_MS,
 };
 
 static struct usb_endpoint_descriptor fs_ecm_in_desc = {
@@ -239,7 +239,7 @@ static struct usb_endpoint_descriptor hs_ecm_notify_desc = {
         .bEndpointAddress =     USB_DIR_IN,
         .bmAttributes =         USB_ENDPOINT_XFER_INT,
         .wMaxPacketSize =       cpu_to_le16(ECM_STATUS_BYTECOUNT),
-        .bInterval =            LOG2_STATUS_INTERVAL_MSEC + 4,
+        .bInterval =            USB_MS_TO_HS_INTERVAL(ECM_STATUS_INTERVAL_MS),
 };
 
 static struct usb_endpoint_descriptor hs_ecm_in_desc = {
@@ -288,7 +288,7 @@ static struct usb_endpoint_descriptor ss_ecm_notify_desc = {
         .bEndpointAddress =     USB_DIR_IN,
         .bmAttributes =         USB_ENDPOINT_XFER_INT,
         .wMaxPacketSize =       cpu_to_le16(ECM_STATUS_BYTECOUNT),
-        .bInterval =            LOG2_STATUS_INTERVAL_MSEC + 4,
+        .bInterval =            USB_MS_TO_HS_INTERVAL(ECM_STATUS_INTERVAL_MS),
 };
 
 static struct usb_ss_ep_comp_descriptor ss_ecm_intr_comp_desc = {
@@ -330,6 +330,7 @@ static struct usb_ss_ep_comp_descriptor ss_ecm_bulk_comp_desc = {
 
 static struct usb_descriptor_header *ecm_ss_function[] = {
         /* CDC ECM control descriptors */
+        (struct usb_descriptor_header *) &ecm_iad_descriptor,
         (struct usb_descriptor_header *) &ecm_control_intf,
         (struct usb_descriptor_header *) &ecm_header_desc,
         (struct usb_descriptor_header *) &ecm_union_desc,
@@ -353,7 +354,7 @@ static struct usb_descriptor_header *ecm_ss_function[] = {
 
 static struct usb_string ecm_string_defs[] = {
         [0].s = "CDC Ethernet Control Model (ECM)",
-        [1].s = NULL /* DYNAMIC */,
+        [1].s = "",
         [2].s = "CDC Ethernet Data",
         [3].s = "CDC ECM",
         {  } /* end of list */
@@ -742,42 +743,24 @@ ecm_bind(struct usb_configuration *c, struct usb_function *f)
         ecm->notify_req->context = ecm;
         ecm->notify_req->complete = ecm_notify_complete;
 
-        /* copy descriptors, and track endpoint copies */
-        f->descriptors = usb_copy_descriptors(ecm_fs_function);
-        if (!f->descriptors)
-                goto fail;
-
         /* support all relevant hardware speeds... we expect that when
          * hardware is dual speed, all bulk-capable endpoints work at
          * both speeds
          */
-        if (gadget_is_dualspeed(c->cdev->gadget)) {
-                hs_ecm_in_desc.bEndpointAddress =
-                                fs_ecm_in_desc.bEndpointAddress;
-                hs_ecm_out_desc.bEndpointAddress =
-                                fs_ecm_out_desc.bEndpointAddress;
-                hs_ecm_notify_desc.bEndpointAddress =
-                                fs_ecm_notify_desc.bEndpointAddress;
-
-                /* copy descriptors, and track endpoint copies */
-                f->hs_descriptors = usb_copy_descriptors(ecm_hs_function);
-                if (!f->hs_descriptors)
-                        goto fail;
-        }
-
-        if (gadget_is_superspeed(c->cdev->gadget)) {
-                ss_ecm_in_desc.bEndpointAddress =
-                                fs_ecm_in_desc.bEndpointAddress;
-                ss_ecm_out_desc.bEndpointAddress =
-                                fs_ecm_out_desc.bEndpointAddress;
-                ss_ecm_notify_desc.bEndpointAddress =
-                                fs_ecm_notify_desc.bEndpointAddress;
-
-                /* copy descriptors, and track endpoint copies */
-                f->ss_descriptors = usb_copy_descriptors(ecm_ss_function);
-                if (!f->ss_descriptors)
-                        goto fail;
-        }
+        hs_ecm_in_desc.bEndpointAddress = fs_ecm_in_desc.bEndpointAddress;
+        hs_ecm_out_desc.bEndpointAddress = fs_ecm_out_desc.bEndpointAddress;
+        hs_ecm_notify_desc.bEndpointAddress =
+                fs_ecm_notify_desc.bEndpointAddress;
+
+        ss_ecm_in_desc.bEndpointAddress = fs_ecm_in_desc.bEndpointAddress;
+        ss_ecm_out_desc.bEndpointAddress = fs_ecm_out_desc.bEndpointAddress;
+        ss_ecm_notify_desc.bEndpointAddress =
+                fs_ecm_notify_desc.bEndpointAddress;
+
+        status = usb_assign_descriptors(f, ecm_fs_function, ecm_hs_function,
+                        ecm_ss_function);
+        if (status)
+                goto fail;
 
         /* NOTE:  all that is done without knowing or caring about
          * the network link ... which is unavailable to this code
@@ -795,11 +778,6 @@ ecm_bind(struct usb_configuration *c, struct usb_function *f)
         return 0;
 
 fail:
-        if (f->descriptors)
-                usb_free_descriptors(f->descriptors);
-        if (f->hs_descriptors)
-                usb_free_descriptors(f->hs_descriptors);
-
         if (ecm->notify_req) {
                 kfree(ecm->notify_req->buf);
                 usb_ep_free_request(ecm->notify, ecm->notify_req);
@@ -808,9 +786,9 @@ fail:
         /* we might as well release our claims on endpoints */
         if (ecm->notify)
                 ecm->notify->driver_data = NULL;
-        if (ecm->port.out_ep->desc)
+        if (ecm->port.out_ep)
                 ecm->port.out_ep->driver_data = NULL;
-        if (ecm->port.in_ep->desc)
+        if (ecm->port.in_ep)
                 ecm->port.in_ep->driver_data = NULL;
 
         ERROR(cdev, "%s: can't bind, err %d\n", f->name, status);
@@ -825,16 +803,11 @@ ecm_unbind(struct usb_configuration *c, struct usb_function *f)
 
         DBG(c->cdev, "ecm unbind\n");
 
-        if (gadget_is_superspeed(c->cdev->gadget))
-                usb_free_descriptors(f->ss_descriptors);
-        if (gadget_is_dualspeed(c->cdev->gadget))
-                usb_free_descriptors(f->hs_descriptors);
-        usb_free_descriptors(f->descriptors);
+        ecm_string_defs[0].id = 0;
+        usb_free_all_descriptors(f);
 
         kfree(ecm->notify_req->buf);
         usb_ep_free_request(ecm->notify, ecm->notify_req);
-
-        ecm_string_defs[1].s = NULL;
         kfree(ecm);
 }
 
@@ -859,36 +832,15 @@ ecm_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN])
         if (!can_support_ecm(c->cdev->gadget) || !ethaddr)
                 return -EINVAL;
 
-        /* maybe allocate device-global string IDs */
         if (ecm_string_defs[0].id == 0) {
-
-                /* control interface label */
-                status = usb_string_id(c->cdev);
-                if (status < 0)
-                        return status;
-                ecm_string_defs[0].id = status;
-                ecm_control_intf.iInterface = status;
-
-                /* data interface label */
-                status = usb_string_id(c->cdev);
-                if (status < 0)
+                status = usb_string_ids_tab(c->cdev, ecm_string_defs);
+                if (status)
                         return status;
-                ecm_string_defs[2].id = status;
-                ecm_data_intf.iInterface = status;
 
-                /* MAC address */
-                status = usb_string_id(c->cdev);
-                if (status < 0)
-                        return status;
-                ecm_string_defs[1].id = status;
-                ecm_desc.iMACAddress = status;
-
-                /* IAD label */
-                status = usb_string_id(c->cdev);
-                if (status < 0)
-                        return status;
-                ecm_string_defs[3].id = status;
-                ecm_iad_descriptor.iFunction = status;
+                ecm_control_intf.iInterface = ecm_string_defs[0].id;
+                ecm_data_intf.iInterface = ecm_string_defs[2].id;
+                ecm_desc.iMACAddress = ecm_string_defs[1].id;
+                ecm_iad_descriptor.iFunction = ecm_string_defs[3].id;
         }
 
         /* allocate and initialize one new instance */
@@ -913,9 +865,7 @@ ecm_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN])
         ecm->port.func.disable = ecm_disable;
 
         status = usb_add_function(c, &ecm->port.func);
-        if (status) {
-                ecm_string_defs[1].s = NULL;
+        if (status)
                 kfree(ecm);
-        }
         return status;
 }
diff --git a/drivers/usb/gadget/f_eem.c b/drivers/usb/gadget/f_eem.c
index 1a7b2dd7d408..cf0ebee85563 100644
--- a/drivers/usb/gadget/f_eem.c
+++ b/drivers/usb/gadget/f_eem.c
@@ -274,38 +274,20 @@ eem_bind(struct usb_configuration *c, struct usb_function *f)
 
         status = -ENOMEM;
 
-        /* copy descriptors, and track endpoint copies */
-        f->descriptors = usb_copy_descriptors(eem_fs_function);
-        if (!f->descriptors)
-                goto fail;
-
         /* support all relevant hardware speeds... we expect that when
          * hardware is dual speed, all bulk-capable endpoints work at
          * both speeds
          */
-        if (gadget_is_dualspeed(c->cdev->gadget)) {
-                eem_hs_in_desc.bEndpointAddress =
-                                eem_fs_in_desc.bEndpointAddress;
-                eem_hs_out_desc.bEndpointAddress =
-                                eem_fs_out_desc.bEndpointAddress;
-
-                /* copy descriptors, and track endpoint copies */
-                f->hs_descriptors = usb_copy_descriptors(eem_hs_function);
-                if (!f->hs_descriptors)
-                        goto fail;
-        }
+        eem_hs_in_desc.bEndpointAddress = eem_fs_in_desc.bEndpointAddress;
+        eem_hs_out_desc.bEndpointAddress = eem_fs_out_desc.bEndpointAddress;
 
-        if (gadget_is_superspeed(c->cdev->gadget)) {
-                eem_ss_in_desc.bEndpointAddress =
-                                eem_fs_in_desc.bEndpointAddress;
-                eem_ss_out_desc.bEndpointAddress =
-                                eem_fs_out_desc.bEndpointAddress;
+        eem_ss_in_desc.bEndpointAddress = eem_fs_in_desc.bEndpointAddress;
+        eem_ss_out_desc.bEndpointAddress = eem_fs_out_desc.bEndpointAddress;
 
-                /* copy descriptors, and track endpoint copies */
-                f->ss_descriptors = usb_copy_descriptors(eem_ss_function);
-                if (!f->ss_descriptors)
-                        goto fail;
-        }
+        status = usb_assign_descriptors(f, eem_fs_function, eem_hs_function,
+                        eem_ss_function);
+        if (status)
+                goto fail;
 
         DBG(cdev, "CDC Ethernet (EEM): %s speed IN/%s OUT/%s\n",
                         gadget_is_superspeed(c->cdev->gadget) ? "super" :
@@ -314,15 +296,10 @@ eem_bind(struct usb_configuration *c, struct usb_function *f)
         return 0;
 
 fail:
-        if (f->descriptors)
-                usb_free_descriptors(f->descriptors);
-        if (f->hs_descriptors)
-                usb_free_descriptors(f->hs_descriptors);
-
-        /* we might as well release our claims on endpoints */
-        if (eem->port.out_ep->desc)
+        usb_free_all_descriptors(f);
+        if (eem->port.out_ep)
                 eem->port.out_ep->driver_data = NULL;
-        if (eem->port.in_ep->desc)
+        if (eem->port.in_ep)
                 eem->port.in_ep->driver_data = NULL;
 
         ERROR(cdev, "%s: can't bind, err %d\n", f->name, status);
@@ -337,11 +314,7 @@ eem_unbind(struct usb_configuration *c, struct usb_function *f)
 
         DBG(c->cdev, "eem unbind\n");
 
-        if (gadget_is_superspeed(c->cdev->gadget))
-                usb_free_descriptors(f->ss_descriptors);
-        if (gadget_is_dualspeed(c->cdev->gadget))
-                usb_free_descriptors(f->hs_descriptors);
-        usb_free_descriptors(f->descriptors);
+        usb_free_all_descriptors(f);
         kfree(eem);
 }
 
diff --git a/drivers/usb/gadget/f_fs.c b/drivers/usb/gadget/f_fs.c
index 64c4ec10d1fc..4a6961c517f2 100644
--- a/drivers/usb/gadget/f_fs.c
+++ b/drivers/usb/gadget/f_fs.c
@@ -2097,7 +2097,7 @@ static int __ffs_func_bind_do_descs(enum ffs_entity_type type, u8 *valuep,
         if (isHS)
                 func->function.hs_descriptors[(long)valuep] = desc;
         else
-                func->function.descriptors[(long)valuep]    = desc;
+                func->function.fs_descriptors[(long)valuep]    = desc;
 
         if (!desc || desc->bDescriptorType != USB_DT_ENDPOINT)
                 return 0;
@@ -2249,7 +2249,7 @@ static int ffs_func_bind(struct usb_configuration *c,
          * numbers without worrying that it may be described later on.
          */
         if (likely(full)) {
-                func->function.descriptors = data->fs_descs;
+                func->function.fs_descriptors = data->fs_descs;
                 ret = ffs_do_descs(ffs->fs_descs_count,
                                    data->raw_descs,
                                    sizeof data->raw_descs,
diff --git a/drivers/usb/gadget/f_hid.c b/drivers/usb/gadget/f_hid.c
index 511e527178e2..6e69a8e8d22a 100644
--- a/drivers/usb/gadget/f_hid.c
+++ b/drivers/usb/gadget/f_hid.c
@@ -573,7 +573,6 @@ static int __init hidg_bind(struct usb_configuration *c, struct usb_function *f)
                 goto fail;
         hidg_interface_desc.bInterfaceNumber = status;
 
-
         /* allocate instance-specific endpoints */
         status = -ENODEV;
         ep = usb_ep_autoconfig(c->cdev->gadget, &hidg_fs_in_ep_desc);
@@ -609,20 +608,15 @@ static int __init hidg_bind(struct usb_configuration *c, struct usb_function *f)
         hidg_desc.desc[0].wDescriptorLength =
                 cpu_to_le16(hidg->report_desc_length);
 
-        /* copy descriptors */
-        f->descriptors = usb_copy_descriptors(hidg_fs_descriptors);
-        if (!f->descriptors)
-                goto fail;
+        hidg_hs_in_ep_desc.bEndpointAddress =
+                hidg_fs_in_ep_desc.bEndpointAddress;
+        hidg_hs_out_ep_desc.bEndpointAddress =
+                hidg_fs_out_ep_desc.bEndpointAddress;
 
-        if (gadget_is_dualspeed(c->cdev->gadget)) {
-                hidg_hs_in_ep_desc.bEndpointAddress =
-                        hidg_fs_in_ep_desc.bEndpointAddress;
-                hidg_hs_out_ep_desc.bEndpointAddress =
-                        hidg_fs_out_ep_desc.bEndpointAddress;
-                f->hs_descriptors = usb_copy_descriptors(hidg_hs_descriptors);
-                if (!f->hs_descriptors)
-                        goto fail;
-        }
+        status = usb_assign_descriptors(f, hidg_fs_descriptors,
+                        hidg_hs_descriptors, NULL);
+        if (status)
+                goto fail;
 
         mutex_init(&hidg->lock);
         spin_lock_init(&hidg->spinlock);
@@ -649,9 +643,7 @@ fail:
                         usb_ep_free_request(hidg->in_ep, hidg->req);
         }
 
-        usb_free_descriptors(f->hs_descriptors);
-        usb_free_descriptors(f->descriptors);
-
+        usb_free_all_descriptors(f);
         return status;
 }
 
@@ -668,9 +660,7 @@ static void hidg_unbind(struct usb_configuration *c, struct usb_function *f)
         kfree(hidg->req->buf);
         usb_ep_free_request(hidg->in_ep, hidg->req);
 
-        /* free descriptors copies */
-        usb_free_descriptors(f->hs_descriptors);
-        usb_free_descriptors(f->descriptors);
+        usb_free_all_descriptors(f);
 
         kfree(hidg->report_desc);
         kfree(hidg);
diff --git a/drivers/usb/gadget/f_loopback.c b/drivers/usb/gadget/f_loopback.c
index 7275706caeb0..bb39cb2bb3a3 100644
--- a/drivers/usb/gadget/f_loopback.c
+++ b/drivers/usb/gadget/f_loopback.c
@@ -177,6 +177,7 @@ loopback_bind(struct usb_configuration *c, struct usb_function *f)
         struct usb_composite_dev *cdev = c->cdev;
         struct f_loopback       *loop = func_to_loop(f);
         int                     id;
+        int ret;
 
         /* allocate interface ID(s) */
         id = usb_interface_id(c, f);
@@ -201,22 +202,19 @@ autoconf_fail:
         loop->out_ep->driver_data = cdev;       /* claim */
 
         /* support high speed hardware */
-        if (gadget_is_dualspeed(c->cdev->gadget)) {
-                hs_loop_source_desc.bEndpointAddress =
-                                fs_loop_source_desc.bEndpointAddress;
-                hs_loop_sink_desc.bEndpointAddress =
-                                fs_loop_sink_desc.bEndpointAddress;
-                f->hs_descriptors = hs_loopback_descs;
-        }
+        hs_loop_source_desc.bEndpointAddress =
+                fs_loop_source_desc.bEndpointAddress;
+        hs_loop_sink_desc.bEndpointAddress = fs_loop_sink_desc.bEndpointAddress;
 
         /* support super speed hardware */
-        if (gadget_is_superspeed(c->cdev->gadget)) {
-                ss_loop_source_desc.bEndpointAddress =
-                                fs_loop_source_desc.bEndpointAddress;
-                ss_loop_sink_desc.bEndpointAddress =
-                                fs_loop_sink_desc.bEndpointAddress;
-                f->ss_descriptors = ss_loopback_descs;
-        }
+        ss_loop_source_desc.bEndpointAddress =
+                fs_loop_source_desc.bEndpointAddress;
+        ss_loop_sink_desc.bEndpointAddress = fs_loop_sink_desc.bEndpointAddress;
+
+        ret = usb_assign_descriptors(f, fs_loopback_descs, hs_loopback_descs,
+                        ss_loopback_descs);
+        if (ret)
+                return ret;
 
         DBG(cdev, "%s speed %s: IN/%s, OUT/%s\n",
             (gadget_is_superspeed(c->cdev->gadget) ? "super" :
@@ -228,6 +226,7 @@ autoconf_fail:
 static void
 loopback_unbind(struct usb_configuration *c, struct usb_function *f)
 {
+        usb_free_all_descriptors(f);
         kfree(func_to_loop(f));
 }
 
@@ -379,7 +378,6 @@ static int __init loopback_bind_config(struct usb_configuration *c)
                 return -ENOMEM;
 
         loop->function.name = "loopback";
-        loop->function.descriptors = fs_loopback_descs;
         loop->function.bind = loopback_bind;
         loop->function.unbind = loopback_unbind;
         loop->function.set_alt = loopback_set_alt;
diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c
index 3a7668bde3ef..5d027b3e1ef0 100644
--- a/drivers/usb/gadget/f_mass_storage.c
+++ b/drivers/usb/gadget/f_mass_storage.c
@@ -228,10 +228,6 @@
 
 static const char fsg_string_interface[] = "Mass Storage";
 
-#define FSG_NO_DEVICE_STRINGS    1
-#define FSG_NO_OTG               1
-#define FSG_NO_INTR_EP           1
-
 #include "storage_common.c"
 
 
@@ -2904,9 +2900,7 @@ static void fsg_unbind(struct usb_configuration *c, struct usb_function *f)
         }
 
         fsg_common_put(common);
-        usb_free_descriptors(fsg->function.descriptors);
-        usb_free_descriptors(fsg->function.hs_descriptors);
-        usb_free_descriptors(fsg->function.ss_descriptors);
+        usb_free_all_descriptors(&fsg->function);
         kfree(fsg);
 }
 
@@ -2916,6 +2910,8 @@ static int fsg_bind(struct usb_configuration *c, struct usb_function *f)
         struct usb_gadget       *gadget = c->cdev->gadget;
         int                     i;
         struct usb_ep           *ep;
+        unsigned                max_burst;
+        int                     ret;
 
         fsg->gadget = gadget;
 
@@ -2939,45 +2935,27 @@ static int fsg_bind(struct usb_configuration *c, struct usb_function *f)
         ep->driver_data = fsg->common;  /* claim the endpoint */
         fsg->bulk_out = ep;
 
-        /* Copy descriptors */
-        f->descriptors = usb_copy_descriptors(fsg_fs_function);
-        if (unlikely(!f->descriptors))
-                return -ENOMEM;
-
-        if (gadget_is_dualspeed(gadget)) {
-                /* Assume endpoint addresses are the same for both speeds */
-                fsg_hs_bulk_in_desc.bEndpointAddress =
-                        fsg_fs_bulk_in_desc.bEndpointAddress;
-                fsg_hs_bulk_out_desc.bEndpointAddress =
-                        fsg_fs_bulk_out_desc.bEndpointAddress;
-                f->hs_descriptors = usb_copy_descriptors(fsg_hs_function);
-                if (unlikely(!f->hs_descriptors)) {
-                        usb_free_descriptors(f->descriptors);
-                        return -ENOMEM;
-                }
-        }
-
-        if (gadget_is_superspeed(gadget)) {
-                unsigned        max_burst;
+        /* Assume endpoint addresses are the same for both speeds */
+        fsg_hs_bulk_in_desc.bEndpointAddress =
+                fsg_fs_bulk_in_desc.bEndpointAddress;
+        fsg_hs_bulk_out_desc.bEndpointAddress =
+                fsg_fs_bulk_out_desc.bEndpointAddress;
 
-                /* Calculate bMaxBurst, we know packet size is 1024 */
-                max_burst = min_t(unsigned, FSG_BUFLEN / 1024, 15);
+        /* Calculate bMaxBurst, we know packet size is 1024 */
+        max_burst = min_t(unsigned, FSG_BUFLEN / 1024, 15);
 
-                fsg_ss_bulk_in_desc.bEndpointAddress =
-                        fsg_fs_bulk_in_desc.bEndpointAddress;
-                fsg_ss_bulk_in_comp_desc.bMaxBurst = max_burst;
+        fsg_ss_bulk_in_desc.bEndpointAddress =
+                fsg_fs_bulk_in_desc.bEndpointAddress;
+        fsg_ss_bulk_in_comp_desc.bMaxBurst = max_burst;
 
-                fsg_ss_bulk_out_desc.bEndpointAddress =
-                        fsg_fs_bulk_out_desc.bEndpointAddress;
-                fsg_ss_bulk_out_comp_desc.bMaxBurst = max_burst;
+        fsg_ss_bulk_out_desc.bEndpointAddress =
+                fsg_fs_bulk_out_desc.bEndpointAddress;
+        fsg_ss_bulk_out_comp_desc.bMaxBurst = max_burst;
 
-                f->ss_descriptors = usb_copy_descriptors(fsg_ss_function);
-                if (unlikely(!f->ss_descriptors)) {
-                        usb_free_descriptors(f->hs_descriptors);
-                        usb_free_descriptors(f->descriptors);
-                        return -ENOMEM;
-                }
-        }
+        ret = usb_assign_descriptors(f, fsg_fs_function, fsg_hs_function,
+                        fsg_ss_function);
+        if (ret)
+                goto autoconf_fail;
 
         return 0;
 
@@ -2986,7 +2964,6 @@ autoconf_fail:
         return -ENOTSUPP;
 }
 
-
 /****************************** ADD FUNCTION ******************************/
 
 static struct usb_gadget_strings *fsg_strings_array[] = {
diff --git a/drivers/usb/gadget/f_midi.c b/drivers/usb/gadget/f_midi.c
index 8ed1259fe80d..263e721c2694 100644
--- a/drivers/usb/gadget/f_midi.c
+++ b/drivers/usb/gadget/f_midi.c
@@ -414,7 +414,7 @@ static void f_midi_unbind(struct usb_configuration *c, struct usb_function *f)
         kfree(midi->id);
         midi->id = NULL;
 
-        usb_free_descriptors(f->descriptors);
+        usb_free_all_descriptors(f);
         kfree(midi);
 }
 
@@ -881,19 +881,25 @@ f_midi_bind(struct usb_configuration *c, struct usb_function *f)
          * both speeds
          */
         /* copy descriptors, and track endpoint copies */
+        f->fs_descriptors = usb_copy_descriptors(midi_function);
+        if (!f->fs_descriptors)
+                goto fail_f_midi;
+
         if (gadget_is_dualspeed(c->cdev->gadget)) {
-                c->highspeed = true;
                 bulk_in_desc.wMaxPacketSize = cpu_to_le16(512);
                 bulk_out_desc.wMaxPacketSize = cpu_to_le16(512);
                 f->hs_descriptors = usb_copy_descriptors(midi_function);
-        } else {
-                f->descriptors = usb_copy_descriptors(midi_function);
+                if (!f->hs_descriptors)
+                        goto fail_f_midi;
         }
 
         kfree(midi_function);
 
         return 0;
 
+fail_f_midi:
+        kfree(midi_function);
+        usb_free_descriptors(f->hs_descriptors);
 fail:
         /* we might as well release our claims on endpoints */
         if (midi->out_ep)
diff --git a/drivers/usb/gadget/f_ncm.c b/drivers/usb/gadget/f_ncm.c
index b651b529c67f..6c8362f937be 100644
--- a/drivers/usb/gadget/f_ncm.c
+++ b/drivers/usb/gadget/f_ncm.c
@@ -102,7 +102,7 @@ static inline unsigned ncm_bitrate(struct usb_gadget *g)
                                  USB_CDC_NCM_NTB32_SUPPORTED)
 
 static struct usb_cdc_ncm_ntb_parameters ntb_parameters = {
-        .wLength = sizeof ntb_parameters,
+        .wLength = cpu_to_le16(sizeof(ntb_parameters)),
         .bmNtbFormatsSupported = cpu_to_le16(FORMATS_SUPPORTED),
         .dwNtbInMaxSize = cpu_to_le32(NTB_DEFAULT_IN_SIZE),
         .wNdpInDivisor = cpu_to_le16(4),
@@ -121,7 +121,7 @@ static struct usb_cdc_ncm_ntb_parameters ntb_parameters = {
  * waste less bandwidth.
  */
 
-#define LOG2_STATUS_INTERVAL_MSEC       5       /* 1 << 5 == 32 msec */
+#define NCM_STATUS_INTERVAL_MS          32
 #define NCM_STATUS_BYTECOUNT            16      /* 8 byte header + data */
 
 static struct usb_interface_assoc_descriptor ncm_iad_desc __initdata = {
@@ -230,7 +230,7 @@ static struct usb_endpoint_descriptor fs_ncm_notify_desc __initdata = {
         .bEndpointAddress =     USB_DIR_IN,
         .bmAttributes =         USB_ENDPOINT_XFER_INT,
         .wMaxPacketSize =       cpu_to_le16(NCM_STATUS_BYTECOUNT),
-        .bInterval =            1 << LOG2_STATUS_INTERVAL_MSEC,
+        .bInterval =            NCM_STATUS_INTERVAL_MS,
 };
 
 static struct usb_endpoint_descriptor fs_ncm_in_desc __initdata = {
@@ -275,7 +275,7 @@ static struct usb_endpoint_descriptor hs_ncm_notify_desc __initdata = {
         .bEndpointAddress =     USB_DIR_IN,
         .bmAttributes =         USB_ENDPOINT_XFER_INT,
         .wMaxPacketSize =       cpu_to_le16(NCM_STATUS_BYTECOUNT),
-        .bInterval =            LOG2_STATUS_INTERVAL_MSEC + 4,
+        .bInterval =            USB_MS_TO_HS_INTERVAL(NCM_STATUS_INTERVAL_MS),
 };
 static struct usb_endpoint_descriptor hs_ncm_in_desc __initdata = {
         .bLength =              USB_DT_ENDPOINT_SIZE,
@@ -321,7 +321,7 @@ static struct usb_descriptor_header *ncm_hs_function[] __initdata = {
 
 static struct usb_string ncm_string_defs[] = {
         [STRING_CTRL_IDX].s = "CDC Network Control Model (NCM)",
-        [STRING_MAC_IDX].s = NULL /* DYNAMIC */,
+        [STRING_MAC_IDX].s = "",
         [STRING_DATA_IDX].s = "CDC Network Data",
         [STRING_IAD_IDX].s = "CDC NCM",
         {  } /* end of list */
@@ -869,15 +869,19 @@ static struct sk_buff *ncm_wrap_ntb(struct gether *port,
         struct sk_buff  *skb2;
         int             ncb_len = 0;
         __le16          *tmp;
-        int             div = ntb_parameters.wNdpInDivisor;
-        int             rem = ntb_parameters.wNdpInPayloadRemainder;
+        int             div;
+        int             rem;
         int             pad;
-        int             ndp_align = ntb_parameters.wNdpInAlignment;
+        int             ndp_align;
         int             ndp_pad;
         unsigned        max_size = ncm->port.fixed_in_len;
         struct ndp_parser_opts *opts = ncm->parser_opts;
         unsigned        crc_len = ncm->is_crc ? sizeof(uint32_t) : 0;
 
+        div = le16_to_cpu(ntb_parameters.wNdpInDivisor);
+        rem = le16_to_cpu(ntb_parameters.wNdpInPayloadRemainder);
+        ndp_align = le16_to_cpu(ntb_parameters.wNdpInAlignment);
+
         ncb_len += opts->nth_size;
         ndp_pad = ALIGN(ncb_len, ndp_align) - ncb_len;
         ncb_len += ndp_pad;
@@ -1208,30 +1212,18 @@ ncm_bind(struct usb_configuration *c, struct usb_function *f)
         ncm->notify_req->context = ncm;
         ncm->notify_req->complete = ncm_notify_complete;
 
-        /* copy descriptors, and track endpoint copies */
-        f->descriptors = usb_copy_descriptors(ncm_fs_function);
-        if (!f->descriptors)
-                goto fail;
-
         /*
          * support all relevant hardware speeds... we expect that when
          * hardware is dual speed, all bulk-capable endpoints work at
          * both speeds
          */
-        if (gadget_is_dualspeed(c->cdev->gadget)) {
-                hs_ncm_in_desc.bEndpointAddress =
-                                fs_ncm_in_desc.bEndpointAddress;
-                hs_ncm_out_desc.bEndpointAddress =
-                                fs_ncm_out_desc.bEndpointAddress;
-                hs_ncm_notify_desc.bEndpointAddress =
-                                fs_ncm_notify_desc.bEndpointAddress;
-
-                /* copy descriptors, and track endpoint copies */
-                f->hs_descriptors = usb_copy_descriptors(ncm_hs_function);
-                if (!f->hs_descriptors)
-                        goto fail;
-        }
+        hs_ncm_in_desc.bEndpointAddress = fs_ncm_in_desc.bEndpointAddress;
+        hs_ncm_out_desc.bEndpointAddress = fs_ncm_out_desc.bEndpointAddress;
+        hs_ncm_notify_desc.bEndpointAddress =
+                fs_ncm_notify_desc.bEndpointAddress;
 
+        status = usb_assign_descriptors(f, ncm_fs_function, ncm_hs_function,
+                        NULL);
         /*
          * NOTE:  all that is done without knowing or caring about
          * the network link ... which is unavailable to this code
@@ -1248,9 +1240,7 @@ ncm_bind(struct usb_configuration *c, struct usb_function *f)
         return 0;
 
 fail:
-        if (f->descriptors)
-                usb_free_descriptors(f->descriptors);
-
+        usb_free_all_descriptors(f);
         if (ncm->notify_req) {
                 kfree(ncm->notify_req->buf);
                 usb_ep_free_request(ncm->notify, ncm->notify_req);
@@ -1259,9 +1249,9 @@ fail:
         /* we might as well release our claims on endpoints */
         if (ncm->notify)
                 ncm->notify->driver_data = NULL;
-        if (ncm->port.out_ep->desc)
+        if (ncm->port.out_ep)
                 ncm->port.out_ep->driver_data = NULL;
-        if (ncm->port.in_ep->desc)
+        if (ncm->port.in_ep)
                 ncm->port.in_ep->driver_data = NULL;
 
         ERROR(cdev, "%s: can't bind, err %d\n", f->name, status);
@@ -1276,14 +1266,12 @@ ncm_unbind(struct usb_configuration *c, struct usb_function *f)
 
         DBG(c->cdev, "ncm unbind\n");
 
-        if (gadget_is_dualspeed(c->cdev->gadget))
-                usb_free_descriptors(f->hs_descriptors);
-        usb_free_descriptors(f->descriptors);
+        ncm_string_defs[0].id = 0;
+        usb_free_all_descriptors(f);
 
         kfree(ncm->notify_req->buf);
         usb_ep_free_request(ncm->notify, ncm->notify_req);
 
-        ncm_string_defs[1].s = NULL;
         kfree(ncm);
 }
 
@@ -1307,37 +1295,19 @@ int __init ncm_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN])
         if (!can_support_ecm(c->cdev->gadget) || !ethaddr)
                 return -EINVAL;
 
-        /* maybe allocate device-global string IDs */
         if (ncm_string_defs[0].id == 0) {
-
-                /* control interface label */
-                status = usb_string_id(c->cdev);
+                status = usb_string_ids_tab(c->cdev, ncm_string_defs);
                 if (status < 0)
                         return status;
-                ncm_string_defs[STRING_CTRL_IDX].id = status;
-                ncm_control_intf.iInterface = status;
+                ncm_control_intf.iInterface =
+                        ncm_string_defs[STRING_CTRL_IDX].id;
 
-                /* data interface label */
-                status = usb_string_id(c->cdev);
-                if (status < 0)
-                        return status;
-                ncm_string_defs[STRING_DATA_IDX].id = status;
+                status = ncm_string_defs[STRING_DATA_IDX].id;
                 ncm_data_nop_intf.iInterface = status;
                 ncm_data_intf.iInterface = status;
 
-                /* MAC address */
-                status = usb_string_id(c->cdev);
-                if (status < 0)
-                        return status;
-                ncm_string_defs[STRING_MAC_IDX].id = status;
-                ecm_desc.iMACAddress = status;
-
-                /* IAD */
-                status = usb_string_id(c->cdev);
-                if (status < 0)
-                        return status;
-                ncm_string_defs[STRING_IAD_IDX].id = status;
-                ncm_iad_desc.iFunction = status;
+                ecm_desc.iMACAddress = ncm_string_defs[STRING_MAC_IDX].id;
+                ncm_iad_desc.iFunction = ncm_string_defs[STRING_IAD_IDX].id;
         }
 
         /* allocate and initialize one new instance */
@@ -1347,7 +1317,7 @@ int __init ncm_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN])
 
         /* export host's Ethernet address in CDC format */
         snprintf(ncm->ethaddr, sizeof ncm->ethaddr, "%pm", ethaddr);
-        ncm_string_defs[1].s = ncm->ethaddr;
+        ncm_string_defs[STRING_MAC_IDX].s = ncm->ethaddr;
 
         spin_lock_init(&ncm->lock);
         ncm_reset_values(ncm);
@@ -1367,9 +1337,7 @@ int __init ncm_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN])
         ncm->port.unwrap = ncm_unwrap_ntb;
 
         status = usb_add_function(c, &ncm->port.func);
-        if (status) {
-                ncm_string_defs[1].s = NULL;
+        if (status)
                 kfree(ncm);
-        }
         return status;
 }
diff --git a/drivers/usb/gadget/f_obex.c b/drivers/usb/gadget/f_obex.c
index 5f400f66aa9b..d8dd8782768c 100644
--- a/drivers/usb/gadget/f_obex.c
+++ b/drivers/usb/gadget/f_obex.c
@@ -331,23 +331,19 @@ obex_bind(struct usb_configuration *c, struct usb_function *f)
         obex->port.out = ep;
         ep->driver_data = cdev; /* claim */
 
-        /* copy descriptors, and track endpoint copies */
-        f->descriptors = usb_copy_descriptors(fs_function);
-
         /* support all relevant hardware speeds... we expect that when
          * hardware is dual speed, all bulk-capable endpoints work at
          * both speeds
          */
-        if (gadget_is_dualspeed(c->cdev->gadget)) {
 
-                obex_hs_ep_in_desc.bEndpointAddress =
-                                obex_fs_ep_in_desc.bEndpointAddress;
-                obex_hs_ep_out_desc.bEndpointAddress =
-                                obex_fs_ep_out_desc.bEndpointAddress;
+        obex_hs_ep_in_desc.bEndpointAddress =
+                obex_fs_ep_in_desc.bEndpointAddress;
+        obex_hs_ep_out_desc.bEndpointAddress =
+                obex_fs_ep_out_desc.bEndpointAddress;
 
-                /* copy descriptors, and track endpoint copies */
-                f->hs_descriptors = usb_copy_descriptors(hs_function);
-        }
+        status = usb_assign_descriptors(f, fs_function, hs_function, NULL);
+        if (status)
+                goto fail;
 
         /* Avoid letting this gadget enumerate until the userspace
          * OBEX server is active.
@@ -368,6 +364,7 @@ obex_bind(struct usb_configuration *c, struct usb_function *f)
         return 0;
 
 fail:
+        usb_free_all_descriptors(f);
         /* we might as well release our claims on endpoints */
         if (obex->port.out)
                 obex->port.out->driver_data = NULL;
@@ -382,9 +379,8 @@ fail:
 static void
 obex_unbind(struct usb_configuration *c, struct usb_function *f)
 {
-        if (gadget_is_dualspeed(c->cdev->gadget))
-                usb_free_descriptors(f->hs_descriptors);
-        usb_free_descriptors(f->descriptors);
+        obex_string_defs[OBEX_CTRL_IDX].id = 0;
+        usb_free_all_descriptors(f);
         kfree(func_to_obex(f));
 }
 
@@ -423,22 +419,16 @@ int __init obex_bind_config(struct usb_configuration *c, u8 port_num)
         if (!can_support_obex(c))
                 return -EINVAL;
 
-        /* maybe allocate device-global string IDs, and patch descriptors */
         if (obex_string_defs[OBEX_CTRL_IDX].id == 0) {
-                status = usb_string_id(c->cdev);
-                if (status < 0)
-                        return status;
-                obex_string_defs[OBEX_CTRL_IDX].id = status;
-
-                obex_control_intf.iInterface = status;
-
-                status = usb_string_id(c->cdev);
+                status = usb_string_ids_tab(c->cdev, obex_string_defs);
                 if (status < 0)
                         return status;
-                obex_string_defs[OBEX_DATA_IDX].id = status;
+                obex_control_intf.iInterface =
+                        obex_string_defs[OBEX_CTRL_IDX].id;
 
-                obex_data_nop_intf.iInterface =
-                        obex_data_intf.iInterface = status;
+                status = obex_string_defs[OBEX_DATA_IDX].id;
+                obex_data_nop_intf.iInterface = status;
+                obex_data_intf.iInterface = status;
         }
 
         /* allocate and initialize one new instance */
diff --git a/drivers/usb/gadget/f_phonet.c b/drivers/usb/gadget/f_phonet.c
index 8ee9268fe253..b21ab558b6c0 100644
--- a/drivers/usb/gadget/f_phonet.c
+++ b/drivers/usb/gadget/f_phonet.c
@@ -515,14 +515,14 @@ int pn_bind(struct usb_configuration *c, struct usb_function *f)
         fp->in_ep = ep;
         ep->driver_data = fp; /* Claim */
 
-        pn_hs_sink_desc.bEndpointAddress =
-                pn_fs_sink_desc.bEndpointAddress;
-        pn_hs_source_desc.bEndpointAddress =
-                pn_fs_source_desc.bEndpointAddress;
+        pn_hs_sink_desc.bEndpointAddress = pn_fs_sink_desc.bEndpointAddress;
+        pn_hs_source_desc.bEndpointAddress = pn_fs_source_desc.bEndpointAddress;
 
         /* Do not try to bind Phonet twice... */
-        fp->function.descriptors = fs_pn_function;
-        fp->function.hs_descriptors = hs_pn_function;
+        status = usb_assign_descriptors(f, fs_pn_function, hs_pn_function,
+                        NULL);
+        if (status)
+                goto err;
 
         /* Incoming USB requests */
         status = -ENOMEM;
@@ -531,7 +531,7 @@ int pn_bind(struct usb_configuration *c, struct usb_function *f)
 
                 req = usb_ep_alloc_request(fp->out_ep, GFP_KERNEL);
                 if (!req)
-                        goto err;
+                        goto err_req;
 
                 req->complete = pn_rx_complete;
                 fp->out_reqv[i] = req;
@@ -540,14 +540,18 @@ int pn_bind(struct usb_configuration *c, struct usb_function *f)
         /* Outgoing USB requests */
         fp->in_req = usb_ep_alloc_request(fp->in_ep, GFP_KERNEL);
         if (!fp->in_req)
-                goto err;
+                goto err_req;
 
         INFO(cdev, "USB CDC Phonet function\n");
         INFO(cdev, "using %s, OUT %s, IN %s\n", cdev->gadget->name,
                 fp->out_ep->name, fp->in_ep->name);
         return 0;
 
+err_req:
+        for (i = 0; i < phonet_rxq_size && fp->out_reqv[i]; i++)
+                usb_ep_free_request(fp->out_ep, fp->out_reqv[i]);
 err:
+        usb_free_all_descriptors(f);
         if (fp->out_ep)
                 fp->out_ep->driver_data = NULL;
         if (fp->in_ep)
@@ -569,6 +573,7 @@ pn_unbind(struct usb_configuration *c, struct usb_function *f)
                 if (fp->out_reqv[i])
                         usb_ep_free_request(fp->out_ep, fp->out_reqv[i]);
 
+        usb_free_all_descriptors(f);
         kfree(fp);
 }
 
diff --git a/drivers/usb/gadget/f_rndis.c b/drivers/usb/gadget/f_rndis.c
index b1681e45aca7..71beeb833558 100644
--- a/drivers/usb/gadget/f_rndis.c
+++ b/drivers/usb/gadget/f_rndis.c
@@ -101,7 +101,7 @@ static unsigned int bitrate(struct usb_gadget *g)
 /*
  */
 
-#define LOG2_STATUS_INTERVAL_MSEC       5       /* 1 << 5 == 32 msec */
+#define RNDIS_STATUS_INTERVAL_MS        32
 #define STATUS_BYTECOUNT                8       /* 8 bytes data */
 
 
@@ -190,7 +190,7 @@ static struct usb_endpoint_descriptor fs_notify_desc = {
         .bEndpointAddress =     USB_DIR_IN,
         .bmAttributes =         USB_ENDPOINT_XFER_INT,
         .wMaxPacketSize =       cpu_to_le16(STATUS_BYTECOUNT),
-        .bInterval =            1 << LOG2_STATUS_INTERVAL_MSEC,
+        .bInterval =            RNDIS_STATUS_INTERVAL_MS,
 };
 
 static struct usb_endpoint_descriptor fs_in_desc = {
@@ -236,7 +236,7 @@ static struct usb_endpoint_descriptor hs_notify_desc = {
         .bEndpointAddress =     USB_DIR_IN,
         .bmAttributes =         USB_ENDPOINT_XFER_INT,
         .wMaxPacketSize =       cpu_to_le16(STATUS_BYTECOUNT),
-        .bInterval =            LOG2_STATUS_INTERVAL_MSEC + 4,
+        .bInterval =            USB_MS_TO_HS_INTERVAL(RNDIS_STATUS_INTERVAL_MS)
 };
 
 static struct usb_endpoint_descriptor hs_in_desc = {
@@ -284,7 +284,7 @@ static struct usb_endpoint_descriptor ss_notify_desc = {
         .bEndpointAddress =     USB_DIR_IN,
         .bmAttributes =         USB_ENDPOINT_XFER_INT,
         .wMaxPacketSize =       cpu_to_le16(STATUS_BYTECOUNT),
-        .bInterval =            LOG2_STATUS_INTERVAL_MSEC + 4,
+        .bInterval =            USB_MS_TO_HS_INTERVAL(RNDIS_STATUS_INTERVAL_MS)
 };
 
 static struct usb_ss_ep_comp_descriptor ss_intr_comp_desc = {
@@ -722,42 +722,22 @@ rndis_bind(struct usb_configuration *c, struct usb_function *f)
         rndis->notify_req->context = rndis;
         rndis->notify_req->complete = rndis_response_complete;
 
-        /* copy descriptors, and track endpoint copies */
-        f->descriptors = usb_copy_descriptors(eth_fs_function);
-        if (!f->descriptors)
-                goto fail;
-
         /* support all relevant hardware speeds... we expect that when
          * hardware is dual speed, all bulk-capable endpoints work at
          * both speeds
          */
-        if (gadget_is_dualspeed(c->cdev->gadget)) {
-                hs_in_desc.bEndpointAddress =
-                                fs_in_desc.bEndpointAddress;
-                hs_out_desc.bEndpointAddress =
-                                fs_out_desc.bEndpointAddress;
-                hs_notify_desc.bEndpointAddress =
-                                fs_notify_desc.bEndpointAddress;
-
-                /* copy descriptors, and track endpoint copies */
-                f->hs_descriptors = usb_copy_descriptors(eth_hs_function);
-                if (!f->hs_descriptors)
-                        goto fail;
-        }
+        hs_in_desc.bEndpointAddress = fs_in_desc.bEndpointAddress;
+        hs_out_desc.bEndpointAddress = fs_out_desc.bEndpointAddress;
+        hs_notify_desc.bEndpointAddress = fs_notify_desc.bEndpointAddress;
 
-        if (gadget_is_superspeed(c->cdev->gadget)) {
-                ss_in_desc.bEndpointAddress =
-                                fs_in_desc.bEndpointAddress;
-                ss_out_desc.bEndpointAddress =
-                                fs_out_desc.bEndpointAddress;
-                ss_notify_desc.bEndpointAddress =
-                                fs_notify_desc.bEndpointAddress;
-
-                /* copy descriptors, and track endpoint copies */
-                f->ss_descriptors = usb_copy_descriptors(eth_ss_function);
-                if (!f->ss_descriptors)
-                        goto fail;
-        }
+        ss_in_desc.bEndpointAddress = fs_in_desc.bEndpointAddress;
+        ss_out_desc.bEndpointAddress = fs_out_desc.bEndpointAddress;
+        ss_notify_desc.bEndpointAddress = fs_notify_desc.bEndpointAddress;
+
+        status = usb_assign_descriptors(f, eth_fs_function, eth_hs_function,
+                        eth_ss_function);
+        if (status)
+                goto fail;
 
         rndis->port.open = rndis_open;
         rndis->port.close = rndis_close;
@@ -788,12 +768,7 @@ rndis_bind(struct usb_configuration *c, struct usb_function *f)
         return 0;
 
 fail:
-        if (gadget_is_superspeed(c->cdev->gadget) && f->ss_descriptors)
-                usb_free_descriptors(f->ss_descriptors);
-        if (gadget_is_dualspeed(c->cdev->gadget) && f->hs_descriptors)
-                usb_free_descriptors(f->hs_descriptors);
-        if (f->descriptors)
-                usb_free_descriptors(f->descriptors);
+        usb_free_all_descriptors(f);
 
         if (rndis->notify_req) {
                 kfree(rndis->notify_req->buf);
@@ -803,9 +778,9 @@ fail:
         /* we might as well release our claims on endpoints */
         if (rndis->notify)
                 rndis->notify->driver_data = NULL;
-        if (rndis->port.out_ep->desc)
+        if (rndis->port.out_ep)
                 rndis->port.out_ep->driver_data = NULL;
-        if (rndis->port.in_ep->desc)
+        if (rndis->port.in_ep)
                 rndis->port.in_ep->driver_data = NULL;
 
         ERROR(cdev, "%s: can't bind, err %d\n", f->name, status);
@@ -820,13 +795,9 @@ rndis_unbind(struct usb_configuration *c, struct usb_function *f)
 
         rndis_deregister(rndis->config);
         rndis_exit();
-        rndis_string_defs[0].id = 0;
 
-        if (gadget_is_superspeed(c->cdev->gadget))
-                usb_free_descriptors(f->ss_descriptors);
-        if (gadget_is_dualspeed(c->cdev->gadget))
-                usb_free_descriptors(f->hs_descriptors);
-        usb_free_descriptors(f->descriptors);
+        rndis_string_defs[0].id = 0;
+        usb_free_all_descriptors(f);
 
         kfree(rndis->notify_req->buf);
         usb_ep_free_request(rndis->notify, rndis->notify_req);
@@ -851,34 +822,19 @@ rndis_bind_config_vendor(struct usb_configuration *c, u8 ethaddr[ETH_ALEN],
         if (!can_support_rndis(c) || !ethaddr)
                 return -EINVAL;
 
-        /* maybe allocate device-global string IDs */
         if (rndis_string_defs[0].id == 0) {
-
                 /* ... and setup RNDIS itself */
                 status = rndis_init();
                 if (status < 0)
                         return status;
 
-                /* control interface label */
-                status = usb_string_id(c->cdev);
-                if (status < 0)
+                status = usb_string_ids_tab(c->cdev, rndis_string_defs);
+                if (status)
                         return status;
-                rndis_string_defs[0].id = status;
-                rndis_control_intf.iInterface = status;
 
-                /* data interface label */
-                status = usb_string_id(c->cdev);
-                if (status < 0)
-                        return status;
-                rndis_string_defs[1].id = status;
-                rndis_data_intf.iInterface = status;
-
-                /* IAD iFunction label */
-                status = usb_string_id(c->cdev);
-                if (status < 0)
-                        return status;
-                rndis_string_defs[2].id = status;
-                rndis_iad_descriptor.iFunction = status;
+                rndis_control_intf.iInterface = rndis_string_defs[0].id;
+                rndis_data_intf.iInterface = rndis_string_defs[1].id;
+                rndis_iad_descriptor.iFunction = rndis_string_defs[2].id;
         }
 
         /* allocate and initialize one new instance */
diff --git a/drivers/usb/gadget/f_serial.c b/drivers/usb/gadget/f_serial.c
index 07197d63d9b1..98fa7795df5f 100644
--- a/drivers/usb/gadget/f_serial.c
+++ b/drivers/usb/gadget/f_serial.c
@@ -213,34 +213,20 @@ gser_bind(struct usb_configuration *c, struct usb_function *f)
         gser->port.out = ep;
         ep->driver_data = cdev; /* claim */
 
-        /* copy descriptors, and track endpoint copies */
-        f->descriptors = usb_copy_descriptors(gser_fs_function);
-
         /* support all relevant hardware speeds... we expect that when
          * hardware is dual speed, all bulk-capable endpoints work at
          * both speeds
          */
-        if (gadget_is_dualspeed(c->cdev->gadget)) {
-                gser_hs_in_desc.bEndpointAddress =
-                                gser_fs_in_desc.bEndpointAddress;
-                gser_hs_out_desc.bEndpointAddress =
-                                gser_fs_out_desc.bEndpointAddress;
-
-                /* copy descriptors, and track endpoint copies */
-                f->hs_descriptors = usb_copy_descriptors(gser_hs_function);
-        }
-        if (gadget_is_superspeed(c->cdev->gadget)) {
-                gser_ss_in_desc.bEndpointAddress =
-                        gser_fs_in_desc.bEndpointAddress;
-                gser_ss_out_desc.bEndpointAddress =
-                        gser_fs_out_desc.bEndpointAddress;
-
-                /* copy descriptors, and track endpoint copies */
-                f->ss_descriptors = usb_copy_descriptors(gser_ss_function);
-                if (!f->ss_descriptors)
-                        goto fail;
-        }
+        gser_hs_in_desc.bEndpointAddress = gser_fs_in_desc.bEndpointAddress;
+        gser_hs_out_desc.bEndpointAddress = gser_fs_out_desc.bEndpointAddress;
 
+        gser_ss_in_desc.bEndpointAddress = gser_fs_in_desc.bEndpointAddress;
+        gser_ss_out_desc.bEndpointAddress = gser_fs_out_desc.bEndpointAddress;
+
+        status = usb_assign_descriptors(f, gser_fs_function, gser_hs_function,
+                        gser_ss_function);
+        if (status)
+                goto fail;
         DBG(cdev, "generic ttyGS%d: %s speed IN/%s OUT/%s\n",
                         gser->port_num,
                         gadget_is_superspeed(c->cdev->gadget) ? "super" :
@@ -263,11 +249,7 @@ fail:
 static void
 gser_unbind(struct usb_configuration *c, struct usb_function *f)
 {
-        if (gadget_is_dualspeed(c->cdev->gadget))
-                usb_free_descriptors(f->hs_descriptors);
-        if (gadget_is_superspeed(c->cdev->gadget))
-                usb_free_descriptors(f->ss_descriptors);
-        usb_free_descriptors(f->descriptors);
+        usb_free_all_descriptors(f);
         kfree(func_to_gser(f));
 }
 
diff --git a/drivers/usb/gadget/f_sourcesink.c b/drivers/usb/gadget/f_sourcesink.c
index 3c126fde6e7e..102d49beb9df 100644
--- a/drivers/usb/gadget/f_sourcesink.c
+++ b/drivers/usb/gadget/f_sourcesink.c
@@ -319,6 +319,7 @@ sourcesink_bind(struct usb_configuration *c, struct usb_function *f)
         struct usb_composite_dev *cdev = c->cdev;
         struct f_sourcesink     *ss = func_to_ss(f);
         int     id;
+        int ret;
 
         /* allocate interface ID(s) */
         id = usb_interface_id(c, f);
@@ -387,64 +388,57 @@ no_iso:
                 isoc_maxpacket = 1024;
 
         /* support high speed hardware */
-        if (gadget_is_dualspeed(c->cdev->gadget)) {
-                hs_source_desc.bEndpointAddress =
-                                fs_source_desc.bEndpointAddress;
-                hs_sink_desc.bEndpointAddress =
-                                fs_sink_desc.bEndpointAddress;
+        hs_source_desc.bEndpointAddress = fs_source_desc.bEndpointAddress;
+        hs_sink_desc.bEndpointAddress = fs_sink_desc.bEndpointAddress;
 
-                /*
-                 * Fill in the HS isoc descriptors from the module parameters.
-                 * We assume that the user knows what they are doing and won't
-                 * give parameters that their UDC doesn't support.
-                 */
-                hs_iso_source_desc.wMaxPacketSize = isoc_maxpacket;
-                hs_iso_source_desc.wMaxPacketSize |= isoc_mult << 11;
-                hs_iso_source_desc.bInterval = isoc_interval;
-                hs_iso_source_desc.bEndpointAddress =
-                                fs_iso_source_desc.bEndpointAddress;
-
-                hs_iso_sink_desc.wMaxPacketSize = isoc_maxpacket;
-                hs_iso_sink_desc.wMaxPacketSize |= isoc_mult << 11;
-                hs_iso_sink_desc.bInterval = isoc_interval;
-                hs_iso_sink_desc.bEndpointAddress =
-                                fs_iso_sink_desc.bEndpointAddress;
-
-                f->hs_descriptors = hs_source_sink_descs;
-        }
+        /*
+         * Fill in the HS isoc descriptors from the module parameters.
+         * We assume that the user knows what they are doing and won't
+         * give parameters that their UDC doesn't support.
+         */
+        hs_iso_source_desc.wMaxPacketSize = isoc_maxpacket;
+        hs_iso_source_desc.wMaxPacketSize |= isoc_mult << 11;
+        hs_iso_source_desc.bInterval = isoc_interval;
+        hs_iso_source_desc.bEndpointAddress =
+                fs_iso_source_desc.bEndpointAddress;
+
+        hs_iso_sink_desc.wMaxPacketSize = isoc_maxpacket;
+        hs_iso_sink_desc.wMaxPacketSize |= isoc_mult << 11;
+        hs_iso_sink_desc.bInterval = isoc_interval;
+        hs_iso_sink_desc.bEndpointAddress = fs_iso_sink_desc.bEndpointAddress;
 
         /* support super speed hardware */
-        if (gadget_is_superspeed(c->cdev->gadget)) {
-                ss_source_desc.bEndpointAddress =
-                                fs_source_desc.bEndpointAddress;
-                ss_sink_desc.bEndpointAddress =
-                                fs_sink_desc.bEndpointAddress;
+        ss_source_desc.bEndpointAddress =
+                fs_source_desc.bEndpointAddress;
+        ss_sink_desc.bEndpointAddress =
+                fs_sink_desc.bEndpointAddress;
 
-                /*
-                 * Fill in the SS isoc descriptors from the module parameters.
-                 * We assume that the user knows what they are doing and won't
-                 * give parameters that their UDC doesn't support.
-                 */
-                ss_iso_source_desc.wMaxPacketSize = isoc_maxpacket;
-                ss_iso_source_desc.bInterval = isoc_interval;
-                ss_iso_source_comp_desc.bmAttributes = isoc_mult;
-                ss_iso_source_comp_desc.bMaxBurst = isoc_maxburst;
-                ss_iso_source_comp_desc.wBytesPerInterval =
-                        isoc_maxpacket * (isoc_mult + 1) * (isoc_maxburst + 1);
-                ss_iso_source_desc.bEndpointAddress =
-                                fs_iso_source_desc.bEndpointAddress;
-
-                ss_iso_sink_desc.wMaxPacketSize = isoc_maxpacket;
-                ss_iso_sink_desc.bInterval = isoc_interval;
-                ss_iso_sink_comp_desc.bmAttributes = isoc_mult;
-                ss_iso_sink_comp_desc.bMaxBurst = isoc_maxburst;
-                ss_iso_sink_comp_desc.wBytesPerInterval =
-                        isoc_maxpacket * (isoc_mult + 1) * (isoc_maxburst + 1);
-                ss_iso_sink_desc.bEndpointAddress =
-                                fs_iso_sink_desc.bEndpointAddress;
-
-                f->ss_descriptors = ss_source_sink_descs;
-        }
+        /*
+         * Fill in the SS isoc descriptors from the module parameters.
+         * We assume that the user knows what they are doing and won't
+         * give parameters that their UDC doesn't support.
+         */
+        ss_iso_source_desc.wMaxPacketSize = isoc_maxpacket;
+        ss_iso_source_desc.bInterval = isoc_interval;
+        ss_iso_source_comp_desc.bmAttributes = isoc_mult;
+        ss_iso_source_comp_desc.bMaxBurst = isoc_maxburst;
+        ss_iso_source_comp_desc.wBytesPerInterval =
+                isoc_maxpacket * (isoc_mult + 1) * (isoc_maxburst + 1);
+        ss_iso_source_desc.bEndpointAddress =
+                fs_iso_source_desc.bEndpointAddress;
+
+        ss_iso_sink_desc.wMaxPacketSize = isoc_maxpacket;
+        ss_iso_sink_desc.bInterval = isoc_interval;
+        ss_iso_sink_comp_desc.bmAttributes = isoc_mult;
+        ss_iso_sink_comp_desc.bMaxBurst = isoc_maxburst;
+        ss_iso_sink_comp_desc.wBytesPerInterval =
+                isoc_maxpacket * (isoc_mult + 1) * (isoc_maxburst + 1);
+        ss_iso_sink_desc.bEndpointAddress = fs_iso_sink_desc.bEndpointAddress;
+
+        ret = usb_assign_descriptors(f, fs_source_sink_descs,
+                        hs_source_sink_descs, ss_source_sink_descs);
+        if (ret)
+                return ret;
 
         DBG(cdev, "%s speed %s: IN/%s, OUT/%s, ISO-IN/%s, ISO-OUT/%s\n",
             (gadget_is_superspeed(c->cdev->gadget) ? "super" :
@@ -458,6 +452,7 @@ no_iso:
 static void
 sourcesink_unbind(struct usb_configuration *c, struct usb_function *f)
 {
+        usb_free_all_descriptors(f);
         kfree(func_to_ss(f));
 }
 
@@ -773,7 +768,6 @@ static int __init sourcesink_bind_config(struct usb_configuration *c)
                 return -ENOMEM;
 
         ss->function.name = "source/sink";
-        ss->function.descriptors = fs_source_sink_descs;
         ss->function.bind = sourcesink_bind;
         ss->function.unbind = sourcesink_unbind;
         ss->function.set_alt = sourcesink_set_alt;
diff --git a/drivers/usb/gadget/f_subset.c b/drivers/usb/gadget/f_subset.c
index 4060c0bd9785..f172bd152fbb 100644
--- a/drivers/usb/gadget/f_subset.c
+++ b/drivers/usb/gadget/f_subset.c
@@ -236,7 +236,7 @@ static struct usb_descriptor_header *ss_eth_function[] = {
 
 static struct usb_string geth_string_defs[] = {
         [0].s = "CDC Ethernet Subset/SAFE",
-        [1].s = NULL /* DYNAMIC */,
+        [1].s = "",
         {  } /* end of list */
 };
 
@@ -319,38 +319,22 @@ geth_bind(struct usb_configuration *c, struct usb_function *f)
         geth->port.out_ep = ep;
         ep->driver_data = cdev; /* claim */
 
-        /* copy descriptors, and track endpoint copies */
-        f->descriptors = usb_copy_descriptors(fs_eth_function);
-        if (!f->descriptors)
-                goto fail;
-
         /* support all relevant hardware speeds... we expect that when
          * hardware is dual speed, all bulk-capable endpoints work at
          * both speeds
          */
-        if (gadget_is_dualspeed(c->cdev->gadget)) {
-                hs_subset_in_desc.bEndpointAddress =
-                                fs_subset_in_desc.bEndpointAddress;
-                hs_subset_out_desc.bEndpointAddress =
-                                fs_subset_out_desc.bEndpointAddress;
-
-                /* copy descriptors, and track endpoint copies */
-                f->hs_descriptors = usb_copy_descriptors(hs_eth_function);
-                if (!f->hs_descriptors)
-                        goto fail;
-        }
+        hs_subset_in_desc.bEndpointAddress = fs_subset_in_desc.bEndpointAddress;
+        hs_subset_out_desc.bEndpointAddress =
+                fs_subset_out_desc.bEndpointAddress;
 
-        if (gadget_is_superspeed(c->cdev->gadget)) {
-                ss_subset_in_desc.bEndpointAddress =
-                                fs_subset_in_desc.bEndpointAddress;
-                ss_subset_out_desc.bEndpointAddress =
-                                fs_subset_out_desc.bEndpointAddress;
+        ss_subset_in_desc.bEndpointAddress = fs_subset_in_desc.bEndpointAddress;
+        ss_subset_out_desc.bEndpointAddress =
+                fs_subset_out_desc.bEndpointAddress;
 
-                /* copy descriptors, and track endpoint copies */
-                f->ss_descriptors = usb_copy_descriptors(ss_eth_function);
-                if (!f->ss_descriptors)
-                        goto fail;
-        }
+        status = usb_assign_descriptors(f, fs_eth_function, hs_eth_function,
+                        ss_eth_function);
+        if (status)
+                goto fail;
 
         /* NOTE:  all that is done without knowing or caring about
          * the network link ... which is unavailable to this code
@@ -364,15 +348,11 @@ geth_bind(struct usb_configuration *c, struct usb_function *f)
         return 0;
 
 fail:
-        if (f->descriptors)
-                usb_free_descriptors(f->descriptors);
-        if (f->hs_descriptors)
-                usb_free_descriptors(f->hs_descriptors);
-
+        usb_free_all_descriptors(f);
         /* we might as well release our claims on endpoints */
-        if (geth->port.out_ep->desc)
+        if (geth->port.out_ep)
                 geth->port.out_ep->driver_data = NULL;
-        if (geth->port.in_ep->desc)
+        if (geth->port.in_ep)
                 geth->port.in_ep->driver_data = NULL;
 
         ERROR(cdev, "%s: can't bind, err %d\n", f->name, status);
@@ -383,12 +363,8 @@ fail:
 static void
 geth_unbind(struct usb_configuration *c, struct usb_function *f)
 {
-        if (gadget_is_superspeed(c->cdev->gadget))
-                usb_free_descriptors(f->ss_descriptors);
-        if (gadget_is_dualspeed(c->cdev->gadget))
-                usb_free_descriptors(f->hs_descriptors);
-        usb_free_descriptors(f->descriptors);
-        geth_string_defs[1].s = NULL;
+        geth_string_defs[0].id = 0;
+        usb_free_all_descriptors(f);
         kfree(func_to_geth(f));
 }
 
@@ -414,20 +390,11 @@ int geth_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN])
 
         /* maybe allocate device-global string IDs */
         if (geth_string_defs[0].id == 0) {
-
-                /* interface label */
-                status = usb_string_id(c->cdev);
+                status = usb_string_ids_tab(c->cdev, geth_string_defs);
                 if (status < 0)
                         return status;
-                geth_string_defs[0].id = status;
-                subset_data_intf.iInterface = status;
-
-                /* MAC address */
-                status = usb_string_id(c->cdev);
-                if (status < 0)
-                        return status;
-                geth_string_defs[1].id = status;
-                ether_desc.iMACAddress = status;
+                subset_data_intf.iInterface = geth_string_defs[0].id;
+                ether_desc.iMACAddress = geth_string_defs[1].id;
         }
 
         /* allocate and initialize one new instance */
@@ -449,9 +416,7 @@ int geth_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN])
         geth->port.func.disable = geth_disable;
 
         status = usb_add_function(c, &geth->port.func);
-        if (status) {
-                geth_string_defs[1].s = NULL;
+        if (status)
                 kfree(geth);
-        }
         return status;
 }
diff --git a/drivers/usb/gadget/f_uac1.c b/drivers/usb/gadget/f_uac1.c
index 1a5dcd5565e3..f570e667a640 100644
--- a/drivers/usb/gadget/f_uac1.c
+++ b/drivers/usb/gadget/f_uac1.c
@@ -630,7 +630,7 @@ f_audio_bind(struct usb_configuration *c, struct usb_function *f)
         struct usb_composite_dev *cdev = c->cdev;
         struct f_audio          *audio = func_to_audio(f);
         int                     status;
-        struct usb_ep           *ep;
+        struct usb_ep           *ep = NULL;
 
         f_audio_build_desc(audio);
 
@@ -659,22 +659,14 @@ f_audio_bind(struct usb_configuration *c, struct usb_function *f)
         status = -ENOMEM;
 
         /* copy descriptors, and track endpoint copies */
-        f->descriptors = usb_copy_descriptors(f_audio_desc);
-
-        /*
-         * support all relevant hardware speeds... we expect that when
-         * hardware is dual speed, all bulk-capable endpoints work at
-         * both speeds
-         */
-        if (gadget_is_dualspeed(c->cdev->gadget)) {
-                c->highspeed = true;
-                f->hs_descriptors = usb_copy_descriptors(f_audio_desc);
-        }
-
+        status = usb_assign_descriptors(f, f_audio_desc, f_audio_desc, NULL);
+        if (status)
+                goto fail;
         return 0;
 
 fail:
-
+        if (ep)
+                ep->driver_data = NULL;
         return status;
 }
 
@@ -683,8 +675,7 @@ f_audio_unbind(struct usb_configuration *c, struct usb_function *f)
 {
         struct f_audio          *audio = func_to_audio(f);
 
-        usb_free_descriptors(f->descriptors);
-        usb_free_descriptors(f->hs_descriptors);
+        usb_free_all_descriptors(f);
         kfree(audio);
 }
 
diff --git a/drivers/usb/gadget/f_uac2.c b/drivers/usb/gadget/f_uac2.c
index d3c6cffccb72..d7da258fa3f6 100644
--- a/drivers/usb/gadget/f_uac2.c
+++ b/drivers/usb/gadget/f_uac2.c
@@ -50,13 +50,6 @@ static int c_ssize = 2;
 module_param(c_ssize, uint, S_IRUGO);
 MODULE_PARM_DESC(c_ssize, "Capture Sample Size(bytes)");
 
-#define DMA_ADDR_INVALID        (~(dma_addr_t)0)
-
-#define ALT_SET(x, a)   do {(x) &= ~0xff; (x) |= (a); } while (0)
-#define ALT_GET(x)      ((x) & 0xff)
-#define INTF_SET(x, i)  do {(x) &= 0xff; (x) |= ((i) << 8); } while (0)
-#define INTF_GET(x)     ((x >> 8) & 0xff)
-
 /* Keep everyone on toes */
 #define USB_XFERS       2
 
@@ -144,8 +137,9 @@ static struct snd_pcm_hardware uac2_pcm_hardware = {
 };
 
 struct audio_dev {
-        /* Currently active {Interface[15:8] | AltSettings[7:0]} */
-        __u16 ac_alt, as_out_alt, as_in_alt;
+        u8 ac_intf, ac_alt;
+        u8 as_out_intf, as_out_alt;
+        u8 as_in_intf, as_in_alt;
 
         struct usb_ep *in_ep, *out_ep;
         struct usb_function func;
@@ -408,7 +402,7 @@ static struct snd_pcm_ops uac2_pcm_ops = {
         .prepare = uac2_pcm_null,
 };
 
-static int __devinit snd_uac2_probe(struct platform_device *pdev)
+static int snd_uac2_probe(struct platform_device *pdev)
 {
         struct snd_uac2_chip *uac2 = pdev_to_uac2(pdev);
         struct snd_card *card;
@@ -526,32 +520,22 @@ enum {
         STR_AS_IN_ALT1,
 };
 
-static const char ifassoc[] = "Source/Sink";
-static const char ifctrl[] = "Topology Control";
 static char clksrc_in[8];
 static char clksrc_out[8];
-static const char usb_it[] = "USBH Out";
-static const char io_it[] = "USBD Out";
-static const char usb_ot[] = "USBH In";
-static const char io_ot[] = "USBD In";
-static const char out_alt0[] = "Playback Inactive";
-static const char out_alt1[] = "Playback Active";
-static const char in_alt0[] = "Capture Inactive";
-static const char in_alt1[] = "Capture Active";
 
 static struct usb_string strings_fn[] = {
-        [STR_ASSOC].s = ifassoc,
-        [STR_IF_CTRL].s = ifctrl,
+        [STR_ASSOC].s = "Source/Sink",
+        [STR_IF_CTRL].s = "Topology Control",
         [STR_CLKSRC_IN].s = clksrc_in,
         [STR_CLKSRC_OUT].s = clksrc_out,
-        [STR_USB_IT].s = usb_it,
-        [STR_IO_IT].s = io_it,
-        [STR_USB_OT].s = usb_ot,
-        [STR_IO_OT].s = io_ot,
-        [STR_AS_OUT_ALT0].s = out_alt0,
-        [STR_AS_OUT_ALT1].s = out_alt1,
-        [STR_AS_IN_ALT0].s = in_alt0,
-        [STR_AS_IN_ALT1].s = in_alt1,
+        [STR_USB_IT].s = "USBH Out",
+        [STR_IO_IT].s = "USBD Out",
+        [STR_USB_OT].s = "USBH In",
+        [STR_IO_OT].s = "USBD In",
+        [STR_AS_OUT_ALT0].s = "Playback Inactive",
+        [STR_AS_OUT_ALT1].s = "Playback Active",
+        [STR_AS_IN_ALT0].s = "Capture Inactive",
+        [STR_AS_IN_ALT1].s = "Capture Active",
         { },
 };
 
@@ -952,8 +936,8 @@ afunc_bind(struct usb_configuration *cfg, struct usb_function *fn)
                 return ret;
         }
         std_ac_if_desc.bInterfaceNumber = ret;
-        ALT_SET(agdev->ac_alt, 0);
-        INTF_SET(agdev->ac_alt, ret);
+        agdev->ac_intf = ret;
+        agdev->ac_alt = 0;
 
         ret = usb_interface_id(cfg, fn);
         if (ret < 0) {
@@ -963,8 +947,8 @@ afunc_bind(struct usb_configuration *cfg, struct usb_function *fn)
         }
         std_as_out_if0_desc.bInterfaceNumber = ret;
         std_as_out_if1_desc.bInterfaceNumber = ret;
-        ALT_SET(agdev->as_out_alt, 0);
-        INTF_SET(agdev->as_out_alt, ret);
+        agdev->as_out_intf = ret;
+        agdev->as_out_alt = 0;
 
         ret = usb_interface_id(cfg, fn);
         if (ret < 0) {
@@ -974,19 +958,23 @@ afunc_bind(struct usb_configuration *cfg, struct usb_function *fn)
         }
         std_as_in_if0_desc.bInterfaceNumber = ret;
         std_as_in_if1_desc.bInterfaceNumber = ret;
-        ALT_SET(agdev->as_in_alt, 0);
-        INTF_SET(agdev->as_in_alt, ret);
+        agdev->as_in_intf = ret;
+        agdev->as_in_alt = 0;
 
         agdev->out_ep = usb_ep_autoconfig(gadget, &fs_epout_desc);
-        if (!agdev->out_ep)
+        if (!agdev->out_ep) {
                 dev_err(&uac2->pdev.dev,
                         "%s:%d Error!\n", __func__, __LINE__);
+                goto err;
+        }
         agdev->out_ep->driver_data = agdev;
 
         agdev->in_ep = usb_ep_autoconfig(gadget, &fs_epin_desc);
-        if (!agdev->in_ep)
+        if (!agdev->in_ep) {
                 dev_err(&uac2->pdev.dev,
                         "%s:%d Error!\n", __func__, __LINE__);
+                goto err;
+        }
         agdev->in_ep->driver_data = agdev;
 
         hs_epout_desc.bEndpointAddress = fs_epout_desc.bEndpointAddress;
@@ -994,9 +982,9 @@ afunc_bind(struct usb_configuration *cfg, struct usb_function *fn)
         hs_epin_desc.bEndpointAddress = fs_epin_desc.bEndpointAddress;
         hs_epin_desc.wMaxPacketSize = fs_epin_desc.wMaxPacketSize;
 
-        fn->descriptors = usb_copy_descriptors(fs_audio_desc);
-        if (gadget_is_dualspeed(gadget))
-                fn->hs_descriptors = usb_copy_descriptors(hs_audio_desc);
+        ret = usb_assign_descriptors(fn, fs_audio_desc, hs_audio_desc, NULL);
+        if (ret)
+                goto err;
 
         prm = &agdev->uac2.c_prm;
         prm->max_psize = hs_epout_desc.wMaxPacketSize;
@@ -1005,6 +993,7 @@ afunc_bind(struct usb_configuration *cfg, struct usb_function *fn)
                 prm->max_psize = 0;
                 dev_err(&uac2->pdev.dev,
                         "%s:%d Error!\n", __func__, __LINE__);
+                goto err;
         }
 
         prm = &agdev->uac2.p_prm;
@@ -1014,17 +1003,28 @@ afunc_bind(struct usb_configuration *cfg, struct usb_function *fn)
                 prm->max_psize = 0;
                 dev_err(&uac2->pdev.dev,
                         "%s:%d Error!\n", __func__, __LINE__);
+                goto err;
         }
 
-        return alsa_uac2_init(agdev);
+        ret = alsa_uac2_init(agdev);
+        if (ret)
+                goto err;
+        return 0;
+err:
+        kfree(agdev->uac2.p_prm.rbuf);
+        kfree(agdev->uac2.c_prm.rbuf);
+        usb_free_all_descriptors(fn);
+        if (agdev->in_ep)
+                agdev->in_ep->driver_data = NULL;
+        if (agdev->out_ep)
+                agdev->out_ep->driver_data = NULL;
+        return -EINVAL;
 }
 
 static void
 afunc_unbind(struct usb_configuration *cfg, struct usb_function *fn)
 {
         struct audio_dev *agdev = func_to_agdev(fn);
-        struct usb_composite_dev *cdev = cfg->cdev;
-        struct usb_gadget *gadget = cdev->gadget;
         struct uac2_rtd_params *prm;
 
         alsa_uac2_exit(agdev);
@@ -1034,10 +1034,7 @@ afunc_unbind(struct usb_configuration *cfg, struct usb_function *fn)
 
         prm = &agdev->uac2.c_prm;
         kfree(prm->rbuf);
-
-        if (gadget_is_dualspeed(gadget))
-                usb_free_descriptors(fn->hs_descriptors);
-        usb_free_descriptors(fn->descriptors);
+        usb_free_all_descriptors(fn);
 
         if (agdev->in_ep)
                 agdev->in_ep->driver_data = NULL;
@@ -1064,7 +1061,7 @@ afunc_set_alt(struct usb_function *fn, unsigned intf, unsigned alt)
                 return -EINVAL;
         }
 
-        if (intf == INTF_GET(agdev->ac_alt)) {
+        if (intf == agdev->ac_intf) {
                 /* Control I/f has only 1 AltSetting - 0 */
                 if (alt) {
                         dev_err(&uac2->pdev.dev,
@@ -1074,16 +1071,16 @@ afunc_set_alt(struct usb_function *fn, unsigned intf, unsigned alt)
                 return 0;
         }
 
-        if (intf == INTF_GET(agdev->as_out_alt)) {
+        if (intf == agdev->as_out_intf) {
                 ep = agdev->out_ep;
                 prm = &uac2->c_prm;
                 config_ep_by_speed(gadget, fn, ep);
-                ALT_SET(agdev->as_out_alt, alt);
-        } else if (intf == INTF_GET(agdev->as_in_alt)) {
+                agdev->as_out_alt = alt;
+        } else if (intf == agdev->as_in_intf) {
                 ep = agdev->in_ep;
                 prm = &uac2->p_prm;
                 config_ep_by_speed(gadget, fn, ep);
-                ALT_SET(agdev->as_in_alt, alt);
+                agdev->as_in_alt = alt;
         } else {
                 dev_err(&uac2->pdev.dev,
                         "%s:%d Error!\n", __func__, __LINE__);
@@ -1117,7 +1114,6 @@ afunc_set_alt(struct usb_function *fn, unsigned intf, unsigned alt)
                 prm->ureq[i].pp = prm;
 
                 req->zero = 0;
-                req->dma = DMA_ADDR_INVALID;
                 req->context = &prm->ureq[i];
                 req->length = prm->max_psize;
                 req->complete = agdev_iso_complete;
@@ -1136,12 +1132,12 @@ afunc_get_alt(struct usb_function *fn, unsigned intf)
         struct audio_dev *agdev = func_to_agdev(fn);
         struct snd_uac2_chip *uac2 = &agdev->uac2;
 
-        if (intf == INTF_GET(agdev->ac_alt))
-                return ALT_GET(agdev->ac_alt);
-        else if (intf == INTF_GET(agdev->as_out_alt))
-                return ALT_GET(agdev->as_out_alt);
-        else if (intf == INTF_GET(agdev->as_in_alt))
-                return ALT_GET(agdev->as_in_alt);
+        if (intf == agdev->ac_intf)
+                return agdev->ac_alt;
+        else if (intf == agdev->as_out_intf)
+                return agdev->as_out_alt;
+        else if (intf == agdev->as_in_intf)
+                return agdev->as_in_alt;
         else
                 dev_err(&uac2->pdev.dev,
                         "%s:%d Invalid Interface %d!\n",
@@ -1157,10 +1153,10 @@ afunc_disable(struct usb_function *fn)
         struct snd_uac2_chip *uac2 = &agdev->uac2;
 
         free_ep(&uac2->p_prm, agdev->in_ep);
-        ALT_SET(agdev->as_in_alt, 0);
+        agdev->as_in_alt = 0;
 
         free_ep(&uac2->c_prm, agdev->out_ep);
-        ALT_SET(agdev->as_out_alt, 0);
+        agdev->as_out_alt = 0;
 }
 
 static int
@@ -1267,7 +1263,7 @@ setup_rq_inf(struct usb_function *fn, const struct usb_ctrlrequest *cr)
         u16 w_index = le16_to_cpu(cr->wIndex);
         u8 intf = w_index & 0xff;
 
-        if (intf != INTF_GET(agdev->ac_alt)) {
+        if (intf != agdev->ac_intf) {
                 dev_err(&uac2->pdev.dev,
                         "%s:%d Error!\n", __func__, __LINE__);
                 return -EOPNOTSUPP;
@@ -1316,7 +1312,7 @@ afunc_setup(struct usb_function *fn, const struct usb_ctrlrequest *cr)
 
 static int audio_bind_config(struct usb_configuration *cfg)
 {
-        int id, res;
+        int res;
 
         agdev_g = kzalloc(sizeof *agdev_g, GFP_KERNEL);
         if (agdev_g == NULL) {
@@ -1324,89 +1320,21 @@ static int audio_bind_config(struct usb_configuration *cfg)
                 return -ENOMEM;
         }
 
-        id = usb_string_id(cfg->cdev);
-        if (id < 0)
-                return id;
-
-        strings_fn[STR_ASSOC].id = id;
-        iad_desc.iFunction = id,
-
-        id = usb_string_id(cfg->cdev);
-        if (id < 0)
-                return id;
-
-        strings_fn[STR_IF_CTRL].id = id;
-        std_ac_if_desc.iInterface = id,
-
-        id = usb_string_id(cfg->cdev);
-        if (id < 0)
-                return id;
-
-        strings_fn[STR_CLKSRC_IN].id = id;
-        in_clk_src_desc.iClockSource = id,
-
-        id = usb_string_id(cfg->cdev);
-        if (id < 0)
-                return id;
-
-        strings_fn[STR_CLKSRC_OUT].id = id;
-        out_clk_src_desc.iClockSource = id,
-
-        id = usb_string_id(cfg->cdev);
-        if (id < 0)
-                return id;
-
-        strings_fn[STR_USB_IT].id = id;
-        usb_out_it_desc.iTerminal = id,
-
-        id = usb_string_id(cfg->cdev);
-        if (id < 0)
-                return id;
-
-        strings_fn[STR_IO_IT].id = id;
-        io_in_it_desc.iTerminal = id;
-
-        id = usb_string_id(cfg->cdev);
-        if (id < 0)
-                return id;
-
-        strings_fn[STR_USB_OT].id = id;
-        usb_in_ot_desc.iTerminal = id;
-
-        id = usb_string_id(cfg->cdev);
-        if (id < 0)
-                return id;
-
-        strings_fn[STR_IO_OT].id = id;
-        io_out_ot_desc.iTerminal = id;
-
-        id = usb_string_id(cfg->cdev);
-        if (id < 0)
-                return id;
-
-        strings_fn[STR_AS_OUT_ALT0].id = id;
-        std_as_out_if0_desc.iInterface = id;
-
-        id = usb_string_id(cfg->cdev);
-        if (id < 0)
-                return id;
-
-        strings_fn[STR_AS_OUT_ALT1].id = id;
-        std_as_out_if1_desc.iInterface = id;
-
-        id = usb_string_id(cfg->cdev);
-        if (id < 0)
-                return id;
-
-        strings_fn[STR_AS_IN_ALT0].id = id;
-        std_as_in_if0_desc.iInterface = id;
-
-        id = usb_string_id(cfg->cdev);
-        if (id < 0)
-                return id;
-
-        strings_fn[STR_AS_IN_ALT1].id = id;
-        std_as_in_if1_desc.iInterface = id;
+        res = usb_string_ids_tab(cfg->cdev, strings_fn);
+        if (res)
+                return res;
+        iad_desc.iFunction = strings_fn[STR_ASSOC].id;
+        std_ac_if_desc.iInterface = strings_fn[STR_IF_CTRL].id;
+        in_clk_src_desc.iClockSource = strings_fn[STR_CLKSRC_IN].id;
+        out_clk_src_desc.iClockSource = strings_fn[STR_CLKSRC_OUT].id;
+        usb_out_it_desc.iTerminal = strings_fn[STR_USB_IT].id;
+        io_in_it_desc.iTerminal = strings_fn[STR_IO_IT].id;
+        usb_in_ot_desc.iTerminal = strings_fn[STR_USB_OT].id;
+        io_out_ot_desc.iTerminal = strings_fn[STR_IO_OT].id;
+        std_as_out_if0_desc.iInterface = strings_fn[STR_AS_OUT_ALT0].id;
+        std_as_out_if1_desc.iInterface = strings_fn[STR_AS_OUT_ALT1].id;
+        std_as_in_if0_desc.iInterface = strings_fn[STR_AS_IN_ALT0].id;
+        std_as_in_if1_desc.iInterface = strings_fn[STR_AS_IN_ALT1].id;
 
         agdev_g->func.name = "uac2_func";
         agdev_g->func.strings = fn_strings;
diff --git a/drivers/usb/gadget/f_uvc.c b/drivers/usb/gadget/f_uvc.c
index 2a8bf0655c60..5b629876941b 100644
--- a/drivers/usb/gadget/f_uvc.c
+++ b/drivers/usb/gadget/f_uvc.c
@@ -417,7 +417,6 @@ uvc_register_video(struct uvc_device *uvc)
                 return -ENOMEM;
 
         video->parent = &cdev->gadget->dev;
-        video->minor = -1;
         video->fops = &uvc_v4l2_fops;
         video->release = video_device_release;
         strncpy(video->name, cdev->gadget->name, sizeof(video->name));
@@ -577,27 +576,15 @@ uvc_function_unbind(struct usb_configuration *c, struct usb_function *f)
 
         INFO(cdev, "uvc_function_unbind\n");
 
-        if (uvc->vdev) {
-                if (uvc->vdev->minor == -1)
-                        video_device_release(uvc->vdev);
-                else
-                        video_unregister_device(uvc->vdev);
-                uvc->vdev = NULL;
-        }
+        video_unregister_device(uvc->vdev);
+        uvc->control_ep->driver_data = NULL;
+        uvc->video.ep->driver_data = NULL;
 
-        if (uvc->control_ep)
-                uvc->control_ep->driver_data = NULL;
-        if (uvc->video.ep)
-                uvc->video.ep->driver_data = NULL;
-
-        if (uvc->control_req) {
-                usb_ep_free_request(cdev->gadget->ep0, uvc->control_req);
-                kfree(uvc->control_buf);
-        }
+        uvc_en_us_strings[UVC_STRING_ASSOCIATION_IDX].id = 0;
+        usb_ep_free_request(cdev->gadget->ep0, uvc->control_req);
+        kfree(uvc->control_buf);
 
-        kfree(f->descriptors);
-        kfree(f->hs_descriptors);
-        kfree(f->ss_descriptors);
+        usb_free_all_descriptors(f);
 
         kfree(uvc);
 }
@@ -663,49 +650,40 @@ uvc_function_bind(struct usb_configuration *c, struct usb_function *f)
         /* sanity check the streaming endpoint module parameters */
         if (streaming_maxpacket > 1024)
                 streaming_maxpacket = 1024;
+        /*
+         * Fill in the HS descriptors from the module parameters for the Video
+         * Streaming endpoint.
+         * NOTE: We assume that the user knows what they are doing and won't
+         * give parameters that their UDC doesn't support.
+         */
+        uvc_hs_streaming_ep.wMaxPacketSize = streaming_maxpacket;
+        uvc_hs_streaming_ep.wMaxPacketSize |= streaming_mult << 11;
+        uvc_hs_streaming_ep.bInterval = streaming_interval;
+        uvc_hs_streaming_ep.bEndpointAddress =
+                uvc_fs_streaming_ep.bEndpointAddress;
 
-        /* Copy descriptors for FS. */
-        f->descriptors = uvc_copy_descriptors(uvc, USB_SPEED_FULL);
-
-        /* support high speed hardware */
-        if (gadget_is_dualspeed(cdev->gadget)) {
-                /*
-                 * Fill in the HS descriptors from the module parameters for the
-                 * Video Streaming endpoint.
-                 * NOTE: We assume that the user knows what they are doing and
-                 * won't give parameters that their UDC doesn't support.
-                 */
-                uvc_hs_streaming_ep.wMaxPacketSize = streaming_maxpacket;
-                uvc_hs_streaming_ep.wMaxPacketSize |= streaming_mult << 11;
-                uvc_hs_streaming_ep.bInterval = streaming_interval;
-                uvc_hs_streaming_ep.bEndpointAddress =
-                                uvc_fs_streaming_ep.bEndpointAddress;
-
-                /* Copy descriptors. */
-                f->hs_descriptors = uvc_copy_descriptors(uvc, USB_SPEED_HIGH);
-        }
+        /*
+         * Fill in the SS descriptors from the module parameters for the Video
+         * Streaming endpoint.
+         * NOTE: We assume that the user knows what they are doing and won't
+         * give parameters that their UDC doesn't support.
+         */
+        uvc_ss_streaming_ep.wMaxPacketSize = streaming_maxpacket;
+        uvc_ss_streaming_ep.bInterval = streaming_interval;
+        uvc_ss_streaming_comp.bmAttributes = streaming_mult;
+        uvc_ss_streaming_comp.bMaxBurst = streaming_maxburst;
+        uvc_ss_streaming_comp.wBytesPerInterval =
+                streaming_maxpacket * (streaming_mult + 1) *
+                (streaming_maxburst + 1);
+        uvc_ss_streaming_ep.bEndpointAddress =
+                uvc_fs_streaming_ep.bEndpointAddress;
 
-        /* support super speed hardware */
-        if (gadget_is_superspeed(c->cdev->gadget)) {
-                /*
-                 * Fill in the SS descriptors from the module parameters for the
-                 * Video Streaming endpoint.
-                 * NOTE: We assume that the user knows what they are doing and
-                 * won't give parameters that their UDC doesn't support.
-                 */
-                uvc_ss_streaming_ep.wMaxPacketSize = streaming_maxpacket;
-                uvc_ss_streaming_ep.bInterval = streaming_interval;
-                uvc_ss_streaming_comp.bmAttributes = streaming_mult;
-                uvc_ss_streaming_comp.bMaxBurst = streaming_maxburst;
-                uvc_ss_streaming_comp.wBytesPerInterval =
-                        streaming_maxpacket * (streaming_mult + 1) *
-                        (streaming_maxburst + 1);
-                uvc_ss_streaming_ep.bEndpointAddress =
-                                uvc_fs_streaming_ep.bEndpointAddress;
-
-                /* Copy descriptors. */
+        /* Copy descriptors */
+        f->fs_descriptors = uvc_copy_descriptors(uvc, USB_SPEED_FULL);
+        if (gadget_is_dualspeed(cdev->gadget))
+                f->hs_descriptors = uvc_copy_descriptors(uvc, USB_SPEED_HIGH);
+        if (gadget_is_superspeed(c->cdev->gadget))
                 f->ss_descriptors = uvc_copy_descriptors(uvc, USB_SPEED_SUPER);
-        }
 
         /* Preallocate control endpoint request. */
         uvc->control_req = usb_ep_alloc_request(cdev->gadget->ep0, GFP_KERNEL);
@@ -740,7 +718,20 @@ uvc_function_bind(struct usb_configuration *c, struct usb_function *f)
         return 0;
 
 error:
-        uvc_function_unbind(c, f);
+        if (uvc->vdev)
+                video_device_release(uvc->vdev);
+
+        if (uvc->control_ep)
+                uvc->control_ep->driver_data = NULL;
+        if (uvc->video.ep)
+                uvc->video.ep->driver_data = NULL;
+
+        if (uvc->control_req) {
+                usb_ep_free_request(cdev->gadget->ep0, uvc->control_req);
+                kfree(uvc->control_buf);
+        }
+
+        usb_free_all_descriptors(f);
         return ret;
 }
 
@@ -808,25 +799,16 @@ uvc_bind_config(struct usb_configuration *c,
         uvc->desc.hs_streaming = hs_streaming;
         uvc->desc.ss_streaming = ss_streaming;
 
-        /* maybe allocate device-global string IDs, and patch descriptors */
+        /* Allocate string descriptor numbers. */
         if (uvc_en_us_strings[UVC_STRING_ASSOCIATION_IDX].id == 0) {
-                /* Allocate string descriptor numbers. */
-                ret = usb_string_id(c->cdev);
-                if (ret < 0)
-                        goto error;
-                uvc_en_us_strings[UVC_STRING_ASSOCIATION_IDX].id = ret;
-                uvc_iad.iFunction = ret;
-
-                ret = usb_string_id(c->cdev);
-                if (ret < 0)
-                        goto error;
-                uvc_en_us_strings[UVC_STRING_CONTROL_IDX].id = ret;
-                uvc_control_intf.iInterface = ret;
-
-                ret = usb_string_id(c->cdev);
-                if (ret < 0)
+                ret = usb_string_ids_tab(c->cdev, uvc_en_us_strings);
+                if (ret)
                         goto error;
-                uvc_en_us_strings[UVC_STRING_STREAMING_IDX].id = ret;
+                uvc_iad.iFunction =
+                        uvc_en_us_strings[UVC_STRING_ASSOCIATION_IDX].id;
+                uvc_control_intf.iInterface =
+                        uvc_en_us_strings[UVC_STRING_CONTROL_IDX].id;
+                ret = uvc_en_us_strings[UVC_STRING_STREAMING_IDX].id;
                 uvc_streaming_intf_alt0.iInterface = ret;
                 uvc_streaming_intf_alt1.iInterface = ret;
         }
diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c
deleted file mode 100644
index 3f7d640b6758..000000000000
--- a/drivers/usb/gadget/file_storage.c
+++ /dev/null
@@ -1,3656 +0,0 @@
-/*
- * file_storage.c -- File-backed USB Storage Gadget, for USB development
- *
- * Copyright (C) 2003-2008 Alan Stern
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions, and the following disclaimer,
- *    without modification.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. The names of the above-listed copyright holders may not be used
- *    to endorse or promote products derived from this software without
- *    specific prior written permission.
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
- * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
- * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
- * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
- * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
- * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
- * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
- * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
- * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-
-/*
- * The File-backed Storage Gadget acts as a USB Mass Storage device,
- * appearing to the host as a disk drive or as a CD-ROM drive.  In addition
- * to providing an example of a genuinely useful gadget driver for a USB
- * device, it also illustrates a technique of double-buffering for increased
- * throughput.  Last but not least, it gives an easy way to probe the
- * behavior of the Mass Storage drivers in a USB host.
- *
- * Backing storage is provided by a regular file or a block device, specified
- * by the "file" module parameter.  Access can be limited to read-only by
- * setting the optional "ro" module parameter.  (For CD-ROM emulation,
- * access is always read-only.)  The gadget will indicate that it has
- * removable media if the optional "removable" module parameter is set.
- *
- * The gadget supports the Control-Bulk (CB), Control-Bulk-Interrupt (CBI),
- * and Bulk-Only (also known as Bulk-Bulk-Bulk or BBB) transports, selected
- * by the optional "transport" module parameter.  It also supports the
- * following protocols: RBC (0x01), ATAPI or SFF-8020i (0x02), QIC-157 (0c03),
- * UFI (0x04), SFF-8070i (0x05), and transparent SCSI (0x06), selected by
- * the optional "protocol" module parameter.  In addition, the default
- * Vendor ID, Product ID, release number and serial number can be overridden.
- *
- * There is support for multiple logical units (LUNs), each of which has
- * its own backing file.  The number of LUNs can be set using the optional
- * "luns" module parameter (anywhere from 1 to 8), and the corresponding
- * files are specified using comma-separated lists for "file" and "ro".
- * The default number of LUNs is taken from the number of "file" elements;
- * it is 1 if "file" is not given.  If "removable" is not set then a backing
- * file must be specified for each LUN.  If it is set, then an unspecified
- * or empty backing filename means the LUN's medium is not loaded.  Ideally
- * each LUN would be settable independently as a disk drive or a CD-ROM
- * drive, but currently all LUNs have to be the same type.  The CD-ROM
- * emulation includes a single data track and no audio tracks; hence there
- * need be only one backing file per LUN.
- *
- * Requirements are modest; only a bulk-in and a bulk-out endpoint are
- * needed (an interrupt-out endpoint is also needed for CBI).  The memory
- * requirement amounts to two 16K buffers, size configurable by a parameter.
- * Support is included for both full-speed and high-speed operation.
- *
- * Note that the driver is slightly non-portable in that it assumes a
- * single memory/DMA buffer will be useable for bulk-in, bulk-out, and
- * interrupt-in endpoints.  With most device controllers this isn't an
- * issue, but there may be some with hardware restrictions that prevent
- * a buffer from being used by more than one endpoint.
- *
- * Module options:
- *
- *      file=filename[,filename...]
- *                              Required if "removable" is not set, names of
- *                                      the files or block devices used for
- *                                      backing storage
- *      serial=HHHH...          Required serial number (string of hex chars)
- *      ro=b[,b...]             Default false, booleans for read-only access
- *      removable               Default false, boolean for removable media
- *      luns=N                  Default N = number of filenames, number of
- *                                      LUNs to support
- *      nofua=b[,b...]          Default false, booleans for ignore FUA flag
- *                                      in SCSI WRITE(10,12) commands
- *      stall                   Default determined according to the type of
- *                                      USB device controller (usually true),
- *                                      boolean to permit the driver to halt
- *                                      bulk endpoints
- *      cdrom                   Default false, boolean for whether to emulate
- *                                      a CD-ROM drive
- *      transport=XXX           Default BBB, transport name (CB, CBI, or BBB)
- *      protocol=YYY            Default SCSI, protocol name (RBC, 8020 or
- *                                      ATAPI, QIC, UFI, 8070, or SCSI;
- *                                      also 1 - 6)
- *      vendor=0xVVVV           Default 0x0525 (NetChip), USB Vendor ID
- *      product=0xPPPP          Default 0xa4a5 (FSG), USB Product ID
- *      release=0xRRRR          Override the USB release number (bcdDevice)
- *      buflen=N                Default N=16384, buffer size used (will be
- *                                      rounded down to a multiple of
- *                                      PAGE_CACHE_SIZE)
- *
- * If CONFIG_USB_FILE_STORAGE_TEST is not set, only the "file", "serial", "ro",
- * "removable", "luns", "nofua", "stall", and "cdrom" options are available;
- * default values are used for everything else.
- *
- * The pathnames of the backing files and the ro settings are available in
- * the attribute files "file", "nofua", and "ro" in the lun<n> subdirectory of
- * the gadget's sysfs directory.  If the "removable" option is set, writing to
- * these files will simulate ejecting/loading the medium (writing an empty
- * line means eject) and adjusting a write-enable tab.  Changes to the ro
- * setting are not allowed when the medium is loaded or if CD-ROM emulation
- * is being used.
- *
- * This gadget driver is heavily based on "Gadget Zero" by David Brownell.
- * The driver's SCSI command interface was based on the "Information
- * technology - Small Computer System Interface - 2" document from
- * X3T9.2 Project 375D, Revision 10L, 7-SEP-93, available at
- * <http://www.t10.org/ftp/t10/drafts/s2/s2-r10l.pdf>.  The single exception
- * is opcode 0x23 (READ FORMAT CAPACITIES), which was based on the
- * "Universal Serial Bus Mass Storage Class UFI Command Specification"
- * document, Revision 1.0, December 14, 1998, available at
- * <http://www.usb.org/developers/devclass_docs/usbmass-ufi10.pdf>.
- */
-
-
-/*
- *                              Driver Design
- *
- * The FSG driver is fairly straightforward.  There is a main kernel
- * thread that handles most of the work.  Interrupt routines field
- * callbacks from the controller driver: bulk- and interrupt-request
- * completion notifications, endpoint-0 events, and disconnect events.
- * Completion events are passed to the main thread by wakeup calls.  Many
- * ep0 requests are handled at interrupt time, but SetInterface,
- * SetConfiguration, and device reset requests are forwarded to the
- * thread in the form of "exceptions" using SIGUSR1 signals (since they
- * should interrupt any ongoing file I/O operations).
- *
- * The thread's main routine implements the standard command/data/status
- * parts of a SCSI interaction.  It and its subroutines are full of tests
- * for pending signals/exceptions -- all this polling is necessary since
- * the kernel has no setjmp/longjmp equivalents.  (Maybe this is an
- * indication that the driver really wants to be running in userspace.)
- * An important point is that so long as the thread is alive it keeps an
- * open reference to the backing file.  This will prevent unmounting
- * the backing file's underlying filesystem and could cause problems
- * during system shutdown, for example.  To prevent such problems, the
- * thread catches INT, TERM, and KILL signals and converts them into
- * an EXIT exception.
- *
- * In normal operation the main thread is started during the gadget's
- * fsg_bind() callback and stopped during fsg_unbind().  But it can also
- * exit when it receives a signal, and there's no point leaving the
- * gadget running when the thread is dead.  So just before the thread
- * exits, it deregisters the gadget driver.  This makes things a little
- * tricky: The driver is deregistered at two places, and the exiting
- * thread can indirectly call fsg_unbind() which in turn can tell the
- * thread to exit.  The first problem is resolved through the use of the
- * REGISTERED atomic bitflag; the driver will only be deregistered once.
- * The second problem is resolved by having fsg_unbind() check
- * fsg->state; it won't try to stop the thread if the state is already
- * FSG_STATE_TERMINATED.
- *
- * To provide maximum throughput, the driver uses a circular pipeline of
- * buffer heads (struct fsg_buffhd).  In principle the pipeline can be
- * arbitrarily long; in practice the benefits don't justify having more
- * than 2 stages (i.e., double buffering).  But it helps to think of the
- * pipeline as being a long one.  Each buffer head contains a bulk-in and
- * a bulk-out request pointer (since the buffer can be used for both
- * output and input -- directions always are given from the host's
- * point of view) as well as a pointer to the buffer and various state
- * variables.
- *
- * Use of the pipeline follows a simple protocol.  There is a variable
- * (fsg->next_buffhd_to_fill) that points to the next buffer head to use.
- * At any time that buffer head may still be in use from an earlier
- * request, so each buffer head has a state variable indicating whether
- * it is EMPTY, FULL, or BUSY.  Typical use involves waiting for the
- * buffer head to be EMPTY, filling the buffer either by file I/O or by
- * USB I/O (during which the buffer head is BUSY), and marking the buffer
- * head FULL when the I/O is complete.  Then the buffer will be emptied
- * (again possibly by USB I/O, during which it is marked BUSY) and
- * finally marked EMPTY again (possibly by a completion routine).
- *
- * A module parameter tells the driver to avoid stalling the bulk
- * endpoints wherever the transport specification allows.  This is
- * necessary for some UDCs like the SuperH, which cannot reliably clear a
- * halt on a bulk endpoint.  However, under certain circumstances the
- * Bulk-only specification requires a stall.  In such cases the driver
- * will halt the endpoint and set a flag indicating that it should clear
- * the halt in software during the next device reset.  Hopefully this
- * will permit everything to work correctly.  Furthermore, although the
- * specification allows the bulk-out endpoint to halt when the host sends
- * too much data, implementing this would cause an unavoidable race.
- * The driver will always use the "no-stall" approach for OUT transfers.
- *
- * One subtle point concerns sending status-stage responses for ep0
- * requests.  Some of these requests, such as device reset, can involve
- * interrupting an ongoing file I/O operation, which might take an
- * arbitrarily long time.  During that delay the host might give up on
- * the original ep0 request and issue a new one.  When that happens the
- * driver should not notify the host about completion of the original
- * request, as the host will no longer be waiting for it.  So the driver
- * assigns to each ep0 request a unique tag, and it keeps track of the
- * tag value of the request associated with a long-running exception
- * (device-reset, interface-change, or configuration-change).  When the
- * exception handler is finished, the status-stage response is submitted
- * only if the current ep0 request tag is equal to the exception request
- * tag.  Thus only the most recently received ep0 request will get a
- * status-stage response.
- *
- * Warning: This driver source file is too long.  It ought to be split up
- * into a header file plus about 3 separate .c files, to handle the details
- * of the Gadget, USB Mass Storage, and SCSI protocols.
- */
-
-
-/* #define VERBOSE_DEBUG */
-/* #define DUMP_MSGS */
-
-
-#include <linux/blkdev.h>
-#include <linux/completion.h>
-#include <linux/dcache.h>
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <linux/fcntl.h>
-#include <linux/file.h>
-#include <linux/fs.h>
-#include <linux/kref.h>
-#include <linux/kthread.h>
-#include <linux/limits.h>
-#include <linux/module.h>
-#include <linux/rwsem.h>
-#include <linux/slab.h>
-#include <linux/spinlock.h>
-#include <linux/string.h>
-#include <linux/freezer.h>
-#include <linux/utsname.h>
-
-#include <linux/usb/composite.h>
-#include <linux/usb/ch9.h>
-#include <linux/usb/gadget.h>
-
-#include "gadget_chips.h"
-
-#define DRIVER_DESC             "File-backed Storage Gadget"
-#define DRIVER_NAME             "g_file_storage"
-#define DRIVER_VERSION          "1 September 2010"
-
-static       char fsg_string_manufacturer[64];
-static const char fsg_string_product[] = DRIVER_DESC;
-static const char fsg_string_config[] = "Self-powered";
-static const char fsg_string_interface[] = "Mass Storage";
-
-
-#include "storage_common.c"
-
-
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_AUTHOR("Alan Stern");
-MODULE_LICENSE("Dual BSD/GPL");
-
-/*
- * This driver assumes self-powered hardware and has no way for users to
- * trigger remote wakeup.  It uses autoconfiguration to select endpoints
- * and endpoint addresses.
- */
-
-
-/*-------------------------------------------------------------------------*/
-
-
-/* Encapsulate the module parameter settings */
-
-static struct {
-        char            *file[FSG_MAX_LUNS];
-        char            *serial;
-        bool            ro[FSG_MAX_LUNS];
-        bool            nofua[FSG_MAX_LUNS];
-        unsigned int    num_filenames;
-        unsigned int    num_ros;
-        unsigned int    num_nofuas;
-        unsigned int    nluns;
-
-        bool            removable;
-        bool            can_stall;
-        bool            cdrom;
-
-        char            *transport_parm;
-        char            *protocol_parm;
-        unsigned short  vendor;
-        unsigned short  product;
-        unsigned short  release;
-        unsigned int    buflen;
-
-        int             transport_type;
-        char            *transport_name;
-        int             protocol_type;
-        char            *protocol_name;
-
-} mod_data = {                                  // Default values
-        .transport_parm         = "BBB",
-        .protocol_parm          = "SCSI",
-        .removable              = 0,
-        .can_stall              = 1,
-        .cdrom                  = 0,
-        .vendor                 = FSG_VENDOR_ID,
-        .product                = FSG_PRODUCT_ID,
-        .release                = 0xffff,       // Use controller chip type
-        .buflen                 = 16384,
-        };
-
-
-module_param_array_named(file, mod_data.file, charp, &mod_data.num_filenames,
-                S_IRUGO);
-MODULE_PARM_DESC(file, "names of backing files or devices");
-
-module_param_named(serial, mod_data.serial, charp, S_IRUGO);
-MODULE_PARM_DESC(serial, "USB serial number");
-
-module_param_array_named(ro, mod_data.ro, bool, &mod_data.num_ros, S_IRUGO);
-MODULE_PARM_DESC(ro, "true to force read-only");
-
-module_param_array_named(nofua, mod_data.nofua, bool, &mod_data.num_nofuas,
-                S_IRUGO);
-MODULE_PARM_DESC(nofua, "true to ignore SCSI WRITE(10,12) FUA bit");
-
-module_param_named(luns, mod_data.nluns, uint, S_IRUGO);
-MODULE_PARM_DESC(luns, "number of LUNs");
-
-module_param_named(removable, mod_data.removable, bool, S_IRUGO);
-MODULE_PARM_DESC(removable, "true to simulate removable media");
-
-module_param_named(stall, mod_data.can_stall, bool, S_IRUGO);
-MODULE_PARM_DESC(stall, "false to prevent bulk stalls");
-
-module_param_named(cdrom, mod_data.cdrom, bool, S_IRUGO);
-MODULE_PARM_DESC(cdrom, "true to emulate cdrom instead of disk");
-
-/* In the non-TEST version, only the module parameters listed above
- * are available. */
-#ifdef CONFIG_USB_FILE_STORAGE_TEST
-
-module_param_named(transport, mod_data.transport_parm, charp, S_IRUGO);
-MODULE_PARM_DESC(transport, "type of transport (BBB, CBI, or CB)");
-
-module_param_named(protocol, mod_data.protocol_parm, charp, S_IRUGO);
-MODULE_PARM_DESC(protocol, "type of protocol (RBC, 8020, QIC, UFI, "
-                "8070, or SCSI)");
-
-module_param_named(vendor, mod_data.vendor, ushort, S_IRUGO);
-MODULE_PARM_DESC(vendor, "USB Vendor ID");
-
-module_param_named(product, mod_data.product, ushort, S_IRUGO);
-MODULE_PARM_DESC(product, "USB Product ID");
-
-module_param_named(release, mod_data.release, ushort, S_IRUGO);
-MODULE_PARM_DESC(release, "USB release number");
-
-module_param_named(buflen, mod_data.buflen, uint, S_IRUGO);
-MODULE_PARM_DESC(buflen, "I/O buffer size");
-
-#endif /* CONFIG_USB_FILE_STORAGE_TEST */
-
-
-/*
- * These definitions will permit the compiler to avoid generating code for
- * parts of the driver that aren't used in the non-TEST version.  Even gcc
- * can recognize when a test of a constant expression yields a dead code
- * path.
- */
-
-#ifdef CONFIG_USB_FILE_STORAGE_TEST
-
-#define transport_is_bbb()      (mod_data.transport_type == USB_PR_BULK)
-#define transport_is_cbi()      (mod_data.transport_type == USB_PR_CBI)
-#define protocol_is_scsi()      (mod_data.protocol_type == USB_SC_SCSI)
-
-#else
-
-#define transport_is_bbb()      1
-#define transport_is_cbi()      0
-#define protocol_is_scsi()      1
-
-#endif /* CONFIG_USB_FILE_STORAGE_TEST */
-
-
-/*-------------------------------------------------------------------------*/
-
-
-struct fsg_dev {
-        /* lock protects: state, all the req_busy's, and cbbuf_cmnd */
-        spinlock_t              lock;
-        struct usb_gadget       *gadget;
-
-        /* filesem protects: backing files in use */
-        struct rw_semaphore     filesem;
-
-        /* reference counting: wait until all LUNs are released */
-        struct kref             ref;
-
-        struct usb_ep           *ep0;           // Handy copy of gadget->ep0
-        struct usb_request      *ep0req;        // For control responses
-        unsigned int            ep0_req_tag;
-        const char              *ep0req_name;
-
-        struct usb_request      *intreq;        // For interrupt responses
-        int                     intreq_busy;
-        struct fsg_buffhd       *intr_buffhd;
-
-        unsigned int            bulk_out_maxpacket;
-        enum fsg_state          state;          // For exception handling
-        unsigned int            exception_req_tag;
-
-        u8                      config, new_config;
-
-        unsigned int            running : 1;
-        unsigned int            bulk_in_enabled : 1;
-        unsigned int            bulk_out_enabled : 1;
-        unsigned int            intr_in_enabled : 1;
-        unsigned int            phase_error : 1;
-        unsigned int            short_packet_received : 1;
-        unsigned int            bad_lun_okay : 1;
-
-        unsigned long           atomic_bitflags;
-#define REGISTERED              0
-#define IGNORE_BULK_OUT         1
-#define SUSPENDED               2
-
-        struct usb_ep           *bulk_in;
-        struct usb_ep           *bulk_out;
-        struct usb_ep           *intr_in;
-
-        struct fsg_buffhd       *next_buffhd_to_fill;
-        struct fsg_buffhd       *next_buffhd_to_drain;
-
-        int                     thread_wakeup_needed;
-        struct completion       thread_notifier;
-        struct task_struct      *thread_task;
-
-        int                     cmnd_size;
-        u8                      cmnd[MAX_COMMAND_SIZE];
-        enum data_direction     data_dir;
-        u32                     data_size;
-        u32                     data_size_from_cmnd;
-        u32                     tag;
-        unsigned int            lun;
-        u32                     residue;
-        u32                     usb_amount_left;
-
-        /* The CB protocol offers no way for a host to know when a command
-         * has completed.  As a result the next command may arrive early,
-         * and we will still have to handle it.  For that reason we need
-         * a buffer to store new commands when using CB (or CBI, which
-         * does not oblige a host to wait for command completion either). */
-        int                     cbbuf_cmnd_size;
-        u8                      cbbuf_cmnd[MAX_COMMAND_SIZE];
-
-        unsigned int            nluns;
-        struct fsg_lun          *luns;
-        struct fsg_lun          *curlun;
-        /* Must be the last entry */
-        struct fsg_buffhd       buffhds[];
-};
-
-typedef void (*fsg_routine_t)(struct fsg_dev *);
-
-static int exception_in_progress(struct fsg_dev *fsg)
-{
-        return (fsg->state > FSG_STATE_IDLE);
-}
-
-/* Make bulk-out requests be divisible by the maxpacket size */
-static void set_bulk_out_req_length(struct fsg_dev *fsg,
-                struct fsg_buffhd *bh, unsigned int length)
-{
-        unsigned int    rem;
-
-        bh->bulk_out_intended_length = length;
-        rem = length % fsg->bulk_out_maxpacket;
-        if (rem > 0)
-                length += fsg->bulk_out_maxpacket - rem;
-        bh->outreq->length = length;
-}
-
-static struct fsg_dev                   *the_fsg;
-static struct usb_gadget_driver         fsg_driver;
-
-
-/*-------------------------------------------------------------------------*/
-
-static int fsg_set_halt(struct fsg_dev *fsg, struct usb_ep *ep)
-{
-        const char      *name;
-
-        if (ep == fsg->bulk_in)
-                name = "bulk-in";
-        else if (ep == fsg->bulk_out)
-                name = "bulk-out";
-        else
-                name = ep->name;
-        DBG(fsg, "%s set halt\n", name);
-        return usb_ep_set_halt(ep);
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * DESCRIPTORS ... most are static, but strings and (full) configuration
- * descriptors are built on demand.  Also the (static) config and interface
- * descriptors are adjusted during fsg_bind().
- */
-
-/* There is only one configuration. */
-#define CONFIG_VALUE            1
-
-static struct usb_device_descriptor
-device_desc = {
-        .bLength =              sizeof device_desc,
-        .bDescriptorType =      USB_DT_DEVICE,
-
-        .bcdUSB =               cpu_to_le16(0x0200),
-        .bDeviceClass =         USB_CLASS_PER_INTERFACE,
-
-        /* The next three values can be overridden by module parameters */
-        .idVendor =             cpu_to_le16(FSG_VENDOR_ID),
-        .idProduct =            cpu_to_le16(FSG_PRODUCT_ID),
-        .bcdDevice =            cpu_to_le16(0xffff),
-
-        .iManufacturer =        FSG_STRING_MANUFACTURER,
-        .iProduct =             FSG_STRING_PRODUCT,
-        .iSerialNumber =        FSG_STRING_SERIAL,
-        .bNumConfigurations =   1,
-};
-
-static struct usb_config_descriptor
-config_desc = {
-        .bLength =              sizeof config_desc,
-        .bDescriptorType =      USB_DT_CONFIG,
-
-        /* wTotalLength computed by usb_gadget_config_buf() */
-        .bNumInterfaces =       1,
-        .bConfigurationValue =  CONFIG_VALUE,
-        .iConfiguration =       FSG_STRING_CONFIG,
-        .bmAttributes =         USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER,
-        .bMaxPower =            CONFIG_USB_GADGET_VBUS_DRAW / 2,
-};
-
-
-static struct usb_qualifier_descriptor
-dev_qualifier = {
-        .bLength =              sizeof dev_qualifier,
-        .bDescriptorType =      USB_DT_DEVICE_QUALIFIER,
-
-        .bcdUSB =               cpu_to_le16(0x0200),
-        .bDeviceClass =         USB_CLASS_PER_INTERFACE,
-
-        .bNumConfigurations =   1,
-};
-
-static int populate_bos(struct fsg_dev *fsg, u8 *buf)
-{
-        memcpy(buf, &fsg_bos_desc, USB_DT_BOS_SIZE);
-        buf += USB_DT_BOS_SIZE;
-
-        memcpy(buf, &fsg_ext_cap_desc, USB_DT_USB_EXT_CAP_SIZE);
-        buf += USB_DT_USB_EXT_CAP_SIZE;
-
-        memcpy(buf, &fsg_ss_cap_desc, USB_DT_USB_SS_CAP_SIZE);
-
-        return USB_DT_BOS_SIZE + USB_DT_USB_SS_CAP_SIZE
-                + USB_DT_USB_EXT_CAP_SIZE;
-}
-
-/*
- * Config descriptors must agree with the code that sets configurations
- * and with code managing interfaces and their altsettings.  They must
- * also handle different speeds and other-speed requests.
- */
-static int populate_config_buf(struct usb_gadget *gadget,
-                u8 *buf, u8 type, unsigned index)
-{
-        enum usb_device_speed                   speed = gadget->speed;
-        int                                     len;
-        const struct usb_descriptor_header      **function;
-
-        if (index > 0)
-                return -EINVAL;
-
-        if (gadget_is_dualspeed(gadget) && type == USB_DT_OTHER_SPEED_CONFIG)
-                speed = (USB_SPEED_FULL + USB_SPEED_HIGH) - speed;
-        function = gadget_is_dualspeed(gadget) && speed == USB_SPEED_HIGH
-                ? (const struct usb_descriptor_header **)fsg_hs_function
-                : (const struct usb_descriptor_header **)fsg_fs_function;
-
-        /* for now, don't advertise srp-only devices */
-        if (!gadget_is_otg(gadget))
-                function++;
-
-        len = usb_gadget_config_buf(&config_desc, buf, EP0_BUFSIZE, function);
-        ((struct usb_config_descriptor *) buf)->bDescriptorType = type;
-        return len;
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-/* These routines may be called in process context or in_irq */
-
-/* Caller must hold fsg->lock */
-static void wakeup_thread(struct fsg_dev *fsg)
-{
-        /* Tell the main thread that something has happened */
-        fsg->thread_wakeup_needed = 1;
-        if (fsg->thread_task)
-                wake_up_process(fsg->thread_task);
-}
-
-
-static void raise_exception(struct fsg_dev *fsg, enum fsg_state new_state)
-{
-        unsigned long           flags;
-
-        /* Do nothing if a higher-priority exception is already in progress.
-         * If a lower-or-equal priority exception is in progress, preempt it
-         * and notify the main thread by sending it a signal. */
-        spin_lock_irqsave(&fsg->lock, flags);
-        if (fsg->state <= new_state) {
-                fsg->exception_req_tag = fsg->ep0_req_tag;
-                fsg->state = new_state;
-                if (fsg->thread_task)
-                        send_sig_info(SIGUSR1, SEND_SIG_FORCED,
-                                        fsg->thread_task);
-        }
-        spin_unlock_irqrestore(&fsg->lock, flags);
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-/* The disconnect callback and ep0 routines.  These always run in_irq,
- * except that ep0_queue() is called in the main thread to acknowledge
- * completion of various requests: set config, set interface, and
- * Bulk-only device reset. */
-
-static void fsg_disconnect(struct usb_gadget *gadget)
-{
-        struct fsg_dev          *fsg = get_gadget_data(gadget);
-
-        DBG(fsg, "disconnect or port reset\n");
-        raise_exception(fsg, FSG_STATE_DISCONNECT);
-}
-
-
-static int ep0_queue(struct fsg_dev *fsg)
-{
-        int     rc;
-
-        rc = usb_ep_queue(fsg->ep0, fsg->ep0req, GFP_ATOMIC);
-        if (rc != 0 && rc != -ESHUTDOWN) {
-
-                /* We can't do much more than wait for a reset */
-                WARNING(fsg, "error in submission: %s --> %d\n",
-                                fsg->ep0->name, rc);
-        }
-        return rc;
-}
-
-static void ep0_complete(struct usb_ep *ep, struct usb_request *req)
-{
-        struct fsg_dev          *fsg = ep->driver_data;
-
-        if (req->actual > 0)
-                dump_msg(fsg, fsg->ep0req_name, req->buf, req->actual);
-        if (req->status || req->actual != req->length)
-                DBG(fsg, "%s --> %d, %u/%u\n", __func__,
-                                req->status, req->actual, req->length);
-        if (req->status == -ECONNRESET)         // Request was cancelled
-                usb_ep_fifo_flush(ep);
-
-        if (req->status == 0 && req->context)
-                ((fsg_routine_t) (req->context))(fsg);
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-/* Bulk and interrupt endpoint completion handlers.
- * These always run in_irq. */
-
-static void bulk_in_complete(struct usb_ep *ep, struct usb_request *req)
-{
-        struct fsg_dev          *fsg = ep->driver_data;
-        struct fsg_buffhd       *bh = req->context;
-
-        if (req->status || req->actual != req->length)
-                DBG(fsg, "%s --> %d, %u/%u\n", __func__,
-                                req->status, req->actual, req->length);
-        if (req->status == -ECONNRESET)         // Request was cancelled
-                usb_ep_fifo_flush(ep);
-
-        /* Hold the lock while we update the request and buffer states */
-        smp_wmb();
-        spin_lock(&fsg->lock);
-        bh->inreq_busy = 0;
-        bh->state = BUF_STATE_EMPTY;
-        wakeup_thread(fsg);
-        spin_unlock(&fsg->lock);
-}
-
-static void bulk_out_complete(struct usb_ep *ep, struct usb_request *req)
-{
-        struct fsg_dev          *fsg = ep->driver_data;
-        struct fsg_buffhd       *bh = req->context;
-
-        dump_msg(fsg, "bulk-out", req->buf, req->actual);
-        if (req->status || req->actual != bh->bulk_out_intended_length)
-                DBG(fsg, "%s --> %d, %u/%u\n", __func__,
-                                req->status, req->actual,
-                                bh->bulk_out_intended_length);
-        if (req->status == -ECONNRESET)         // Request was cancelled
-                usb_ep_fifo_flush(ep);
-
-        /* Hold the lock while we update the request and buffer states */
-        smp_wmb();
-        spin_lock(&fsg->lock);
-        bh->outreq_busy = 0;
-        bh->state = BUF_STATE_FULL;
-        wakeup_thread(fsg);
-        spin_unlock(&fsg->lock);
-}
-
-
-#ifdef CONFIG_USB_FILE_STORAGE_TEST
-static void intr_in_complete(struct usb_ep *ep, struct usb_request *req)
-{
-        struct fsg_dev          *fsg = ep->driver_data;
-        struct fsg_buffhd       *bh = req->context;
-
-        if (req->status || req->actual != req->length)
-                DBG(fsg, "%s --> %d, %u/%u\n", __func__,
-                                req->status, req->actual, req->length);
-        if (req->status == -ECONNRESET)         // Request was cancelled
-                usb_ep_fifo_flush(ep);
-
-        /* Hold the lock while we update the request and buffer states */
-        smp_wmb();
-        spin_lock(&fsg->lock);
-        fsg->intreq_busy = 0;
-        bh->state = BUF_STATE_EMPTY;
-        wakeup_thread(fsg);
-        spin_unlock(&fsg->lock);
-}
-
-#else
-static void intr_in_complete(struct usb_ep *ep, struct usb_request *req)
-{}
-#endif /* CONFIG_USB_FILE_STORAGE_TEST */
-
-
-/*-------------------------------------------------------------------------*/
-
-/* Ep0 class-specific handlers.  These always run in_irq. */
-
-#ifdef CONFIG_USB_FILE_STORAGE_TEST
-static void received_cbi_adsc(struct fsg_dev *fsg, struct fsg_buffhd *bh)
-{
-        struct usb_request      *req = fsg->ep0req;
-        static u8               cbi_reset_cmnd[6] = {
-                        SEND_DIAGNOSTIC, 4, 0xff, 0xff, 0xff, 0xff};
-
-        /* Error in command transfer? */
-        if (req->status || req->length != req->actual ||
-                        req->actual < 6 || req->actual > MAX_COMMAND_SIZE) {
-
-                /* Not all controllers allow a protocol stall after
-                 * receiving control-out data, but we'll try anyway. */
-                fsg_set_halt(fsg, fsg->ep0);
-                return;                 // Wait for reset
-        }
-
-        /* Is it the special reset command? */
-        if (req->actual >= sizeof cbi_reset_cmnd &&
-                        memcmp(req->buf, cbi_reset_cmnd,
-                                sizeof cbi_reset_cmnd) == 0) {
-
-                /* Raise an exception to stop the current operation
-                 * and reinitialize our state. */
-                DBG(fsg, "cbi reset request\n");
-                raise_exception(fsg, FSG_STATE_RESET);
-                return;
-        }
-
-        VDBG(fsg, "CB[I] accept device-specific command\n");
-        spin_lock(&fsg->lock);
-
-        /* Save the command for later */
-        if (fsg->cbbuf_cmnd_size)
-                WARNING(fsg, "CB[I] overwriting previous command\n");
-        fsg->cbbuf_cmnd_size = req->actual;
-        memcpy(fsg->cbbuf_cmnd, req->buf, fsg->cbbuf_cmnd_size);
-
-        wakeup_thread(fsg);
-        spin_unlock(&fsg->lock);
-}
-
-#else
-static void received_cbi_adsc(struct fsg_dev *fsg, struct fsg_buffhd *bh)
-{}
-#endif /* CONFIG_USB_FILE_STORAGE_TEST */
-
-
-static int class_setup_req(struct fsg_dev *fsg,
-                const struct usb_ctrlrequest *ctrl)
-{
-        struct usb_request      *req = fsg->ep0req;
-        int                     value = -EOPNOTSUPP;
-        u16                     w_index = le16_to_cpu(ctrl->wIndex);
-        u16                     w_value = le16_to_cpu(ctrl->wValue);
-        u16                     w_length = le16_to_cpu(ctrl->wLength);
-
-        if (!fsg->config)
-                return value;
-
-        /* Handle Bulk-only class-specific requests */
-        if (transport_is_bbb()) {
-                switch (ctrl->bRequest) {
-
-                case US_BULK_RESET_REQUEST:
-                        if (ctrl->bRequestType != (USB_DIR_OUT |
-                                        USB_TYPE_CLASS | USB_RECIP_INTERFACE))
-                                break;
-                        if (w_index != 0 || w_value != 0 || w_length != 0) {
-                                value = -EDOM;
-                                break;
-                        }
-
-                        /* Raise an exception to stop the current operation
-                         * and reinitialize our state. */
-                        DBG(fsg, "bulk reset request\n");
-                        raise_exception(fsg, FSG_STATE_RESET);
-                        value = DELAYED_STATUS;
-                        break;
-
-                case US_BULK_GET_MAX_LUN:
-                        if (ctrl->bRequestType != (USB_DIR_IN |
-                                        USB_TYPE_CLASS | USB_RECIP_INTERFACE))
-                                break;
-                        if (w_index != 0 || w_value != 0 || w_length != 1) {
-                                value = -EDOM;
-                                break;
-                        }
-                        VDBG(fsg, "get max LUN\n");
-                        *(u8 *) req->buf = fsg->nluns - 1;
-                        value = 1;
-                        break;
-                }
-        }
-
-        /* Handle CBI class-specific requests */
-        else {
-                switch (ctrl->bRequest) {
-
-                case USB_CBI_ADSC_REQUEST:
-                        if (ctrl->bRequestType != (USB_DIR_OUT |
-                                        USB_TYPE_CLASS | USB_RECIP_INTERFACE))
-                                break;
-                        if (w_index != 0 || w_value != 0) {
-                                value = -EDOM;
-                                break;
-                        }
-                        if (w_length > MAX_COMMAND_SIZE) {
-                                value = -EOVERFLOW;
-                                break;
-                        }
-                        value = w_length;
-                        fsg->ep0req->context = received_cbi_adsc;
-                        break;
-                }
-        }
-
-        if (value == -EOPNOTSUPP)
-                VDBG(fsg,
-                        "unknown class-specific control req "
-                        "%02x.%02x v%04x i%04x l%u\n",
-                        ctrl->bRequestType, ctrl->bRequest,
-                        le16_to_cpu(ctrl->wValue), w_index, w_length);
-        return value;
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-/* Ep0 standard request handlers.  These always run in_irq. */
-
-static int standard_setup_req(struct fsg_dev *fsg,
-                const struct usb_ctrlrequest *ctrl)
-{
-        struct usb_request      *req = fsg->ep0req;
-        int                     value = -EOPNOTSUPP;
-        u16                     w_index = le16_to_cpu(ctrl->wIndex);
-        u16                     w_value = le16_to_cpu(ctrl->wValue);
-
-        /* Usually this just stores reply data in the pre-allocated ep0 buffer,
-         * but config change events will also reconfigure hardware. */
-        switch (ctrl->bRequest) {
-
-        case USB_REQ_GET_DESCRIPTOR:
-                if (ctrl->bRequestType != (USB_DIR_IN | USB_TYPE_STANDARD |
-                                USB_RECIP_DEVICE))
-                        break;
-                switch (w_value >> 8) {
-
-                case USB_DT_DEVICE:
-                        VDBG(fsg, "get device descriptor\n");
-                        device_desc.bMaxPacketSize0 = fsg->ep0->maxpacket;
-                        value = sizeof device_desc;
-                        memcpy(req->buf, &device_desc, value);
-                        break;
-                case USB_DT_DEVICE_QUALIFIER:
-                        VDBG(fsg, "get device qualifier\n");
-                        if (!gadget_is_dualspeed(fsg->gadget) ||
-                                        fsg->gadget->speed == USB_SPEED_SUPER)
-                                break;
-                        /*
-                         * Assume ep0 uses the same maxpacket value for both
-                         * speeds
-                         */
-                        dev_qualifier.bMaxPacketSize0 = fsg->ep0->maxpacket;
-                        value = sizeof dev_qualifier;
-                        memcpy(req->buf, &dev_qualifier, value);
-                        break;
-
-                case USB_DT_OTHER_SPEED_CONFIG:
-                        VDBG(fsg, "get other-speed config descriptor\n");
-                        if (!gadget_is_dualspeed(fsg->gadget) ||
-                                        fsg->gadget->speed == USB_SPEED_SUPER)
-                                break;
-                        goto get_config;
-                case USB_DT_CONFIG:
-                        VDBG(fsg, "get configuration descriptor\n");
-get_config:
-                        value = populate_config_buf(fsg->gadget,
-                                        req->buf,
-                                        w_value >> 8,
-                                        w_value & 0xff);
-                        break;
-
-                case USB_DT_STRING:
-                        VDBG(fsg, "get string descriptor\n");
-
-                        /* wIndex == language code */
-                        value = usb_gadget_get_string(&fsg_stringtab,
-                                        w_value & 0xff, req->buf);
-                        break;
-
-                case USB_DT_BOS:
-                        VDBG(fsg, "get bos descriptor\n");
-
-                        if (gadget_is_superspeed(fsg->gadget))
-                                value = populate_bos(fsg, req->buf);
-                        break;
-                }
-
-                break;
-
-        /* One config, two speeds */
-        case USB_REQ_SET_CONFIGURATION:
-                if (ctrl->bRequestType != (USB_DIR_OUT | USB_TYPE_STANDARD |
-                                USB_RECIP_DEVICE))
-                        break;
-                VDBG(fsg, "set configuration\n");
-                if (w_value == CONFIG_VALUE || w_value == 0) {
-                        fsg->new_config = w_value;
-
-                        /* Raise an exception to wipe out previous transaction
-                         * state (queued bufs, etc) and set the new config. */
-                        raise_exception(fsg, FSG_STATE_CONFIG_CHANGE);
-                        value = DELAYED_STATUS;
-                }
-                break;
-        case USB_REQ_GET_CONFIGURATION:
-                if (ctrl->bRequestType != (USB_DIR_IN | USB_TYPE_STANDARD |
-                                USB_RECIP_DEVICE))
-                        break;
-                VDBG(fsg, "get configuration\n");
-                *(u8 *) req->buf = fsg->config;
-                value = 1;
-                break;
-
-        case USB_REQ_SET_INTERFACE:
-                if (ctrl->bRequestType != (USB_DIR_OUT| USB_TYPE_STANDARD |
-                                USB_RECIP_INTERFACE))
-                        break;
-                if (fsg->config && w_index == 0) {
-
-                        /* Raise an exception to wipe out previous transaction
-                         * state (queued bufs, etc) and install the new
-                         * interface altsetting. */
-                        raise_exception(fsg, FSG_STATE_INTERFACE_CHANGE);
-                        value = DELAYED_STATUS;
-                }
-                break;
-        case USB_REQ_GET_INTERFACE:
-                if (ctrl->bRequestType != (USB_DIR_IN | USB_TYPE_STANDARD |
-                                USB_RECIP_INTERFACE))
-                        break;
-                if (!fsg->config)
-                        break;
-                if (w_index != 0) {
-                        value = -EDOM;
-                        break;
-                }
-                VDBG(fsg, "get interface\n");
-                *(u8 *) req->buf = 0;
-                value = 1;
-                break;
-
-        default:
-                VDBG(fsg,
-                        "unknown control req %02x.%02x v%04x i%04x l%u\n",
-                        ctrl->bRequestType, ctrl->bRequest,
-                        w_value, w_index, le16_to_cpu(ctrl->wLength));
-        }
-
-        return value;
-}
-
-
-static int fsg_setup(struct usb_gadget *gadget,
-                const struct usb_ctrlrequest *ctrl)
-{
-        struct fsg_dev          *fsg = get_gadget_data(gadget);
-        int                     rc;
-        int                     w_length = le16_to_cpu(ctrl->wLength);
-
-        ++fsg->ep0_req_tag;             // Record arrival of a new request
-        fsg->ep0req->context = NULL;
-        fsg->ep0req->length = 0;
-        dump_msg(fsg, "ep0-setup", (u8 *) ctrl, sizeof(*ctrl));
-
-        if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_CLASS)
-                rc = class_setup_req(fsg, ctrl);
-        else
-                rc = standard_setup_req(fsg, ctrl);
-
-        /* Respond with data/status or defer until later? */
-        if (rc >= 0 && rc != DELAYED_STATUS) {
-                rc = min(rc, w_length);
-                fsg->ep0req->length = rc;
-                fsg->ep0req->zero = rc < w_length;
-                fsg->ep0req_name = (ctrl->bRequestType & USB_DIR_IN ?
-                                "ep0-in" : "ep0-out");
-                rc = ep0_queue(fsg);
-        }
-
-        /* Device either stalls (rc < 0) or reports success */
-        return rc;
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-/* All the following routines run in process context */
-
-
-/* Use this for bulk or interrupt transfers, not ep0 */
-static void start_transfer(struct fsg_dev *fsg, struct usb_ep *ep,
-                struct usb_request *req, int *pbusy,
-                enum fsg_buffer_state *state)
-{
-        int     rc;
-
-        if (ep == fsg->bulk_in)
-                dump_msg(fsg, "bulk-in", req->buf, req->length);
-        else if (ep == fsg->intr_in)
-                dump_msg(fsg, "intr-in", req->buf, req->length);
-
-        spin_lock_irq(&fsg->lock);
-        *pbusy = 1;
-        *state = BUF_STATE_BUSY;
-        spin_unlock_irq(&fsg->lock);
-        rc = usb_ep_queue(ep, req, GFP_KERNEL);
-        if (rc != 0) {
-                *pbusy = 0;
-                *state = BUF_STATE_EMPTY;
-
-                /* We can't do much more than wait for a reset */
-
-                /* Note: currently the net2280 driver fails zero-length
-                 * submissions if DMA is enabled. */
-                if (rc != -ESHUTDOWN && !(rc == -EOPNOTSUPP &&
-                                                req->length == 0))
-                        WARNING(fsg, "error in submission: %s --> %d\n",
-                                        ep->name, rc);
-        }
-}
-
-
-static int sleep_thread(struct fsg_dev *fsg)
-{
-        int     rc = 0;
-
-        /* Wait until a signal arrives or we are woken up */
-        for (;;) {
-                try_to_freeze();
-                set_current_state(TASK_INTERRUPTIBLE);
-                if (signal_pending(current)) {
-                        rc = -EINTR;
-                        break;
-                }
-                if (fsg->thread_wakeup_needed)
-                        break;
-                schedule();
-        }
-        __set_current_state(TASK_RUNNING);
-        fsg->thread_wakeup_needed = 0;
-        return rc;
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-static int do_read(struct fsg_dev *fsg)
-{
-        struct fsg_lun          *curlun = fsg->curlun;
-        u32                     lba;
-        struct fsg_buffhd       *bh;
-        int                     rc;
-        u32                     amount_left;
-        loff_t                  file_offset, file_offset_tmp;
-        unsigned int            amount;
-        ssize_t                 nread;
-
-        /* Get the starting Logical Block Address and check that it's
-         * not too big */
-        if (fsg->cmnd[0] == READ_6)
-                lba = get_unaligned_be24(&fsg->cmnd[1]);
-        else {
-                lba = get_unaligned_be32(&fsg->cmnd[2]);
-
-                /* We allow DPO (Disable Page Out = don't save data in the
-                 * cache) and FUA (Force Unit Access = don't read from the
-                 * cache), but we don't implement them. */
-                if ((fsg->cmnd[1] & ~0x18) != 0) {
-                        curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
-                        return -EINVAL;
-                }
-        }
-        if (lba >= curlun->num_sectors) {
-                curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
-                return -EINVAL;
-        }
-        file_offset = ((loff_t) lba) << curlun->blkbits;
-
-        /* Carry out the file reads */
-        amount_left = fsg->data_size_from_cmnd;
-        if (unlikely(amount_left == 0))
-                return -EIO;            // No default reply
-
-        for (;;) {
-
-                /* Figure out how much we need to read:
-                 * Try to read the remaining amount.
-                 * But don't read more than the buffer size.
-                 * And don't try to read past the end of the file.
-                 */
-                amount = min((unsigned int) amount_left, mod_data.buflen);
-                amount = min((loff_t) amount,
-                                curlun->file_length - file_offset);
-
-                /* Wait for the next buffer to become available */
-                bh = fsg->next_buffhd_to_fill;
-                while (bh->state != BUF_STATE_EMPTY) {
-                        rc = sleep_thread(fsg);
-                        if (rc)
-                                return rc;
-                }
-
-                /* If we were asked to read past the end of file,
-                 * end with an empty buffer. */
-                if (amount == 0) {
-                        curlun->sense_data =
-                                        SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
-                        curlun->sense_data_info = file_offset >> curlun->blkbits;
-                        curlun->info_valid = 1;
-                        bh->inreq->length = 0;
-                        bh->state = BUF_STATE_FULL;
-                        break;
-                }
-
-                /* Perform the read */
-                file_offset_tmp = file_offset;
-                nread = vfs_read(curlun->filp,
-                                (char __user *) bh->buf,
-                                amount, &file_offset_tmp);
-                VLDBG(curlun, "file read %u @ %llu -> %d\n", amount,
-                                (unsigned long long) file_offset,
-                                (int) nread);
-                if (signal_pending(current))
-                        return -EINTR;
-
-                if (nread < 0) {
-                        LDBG(curlun, "error in file read: %d\n",
-                                        (int) nread);
-                        nread = 0;
-                } else if (nread < amount) {
-                        LDBG(curlun, "partial file read: %d/%u\n",
-                                        (int) nread, amount);
-                        nread = round_down(nread, curlun->blksize);
-                }
-                file_offset  += nread;
-                amount_left  -= nread;
-                fsg->residue -= nread;
-
-                /* Except at the end of the transfer, nread will be
-                 * equal to the buffer size, which is divisible by the
-                 * bulk-in maxpacket size.
-                 */
-                bh->inreq->length = nread;
-                bh->state = BUF_STATE_FULL;
-
-                /* If an error occurred, report it and its position */
-                if (nread < amount) {
-                        curlun->sense_data = SS_UNRECOVERED_READ_ERROR;
-                        curlun->sense_data_info = file_offset >> curlun->blkbits;
-                        curlun->info_valid = 1;
-                        break;
-                }
-
-                if (amount_left == 0)
-                        break;          // No more left to read
-
-                /* Send this buffer and go read some more */
-                bh->inreq->zero = 0;
-                start_transfer(fsg, fsg->bulk_in, bh->inreq,
-                                &bh->inreq_busy, &bh->state);
-                fsg->next_buffhd_to_fill = bh->next;
-        }
-
-        return -EIO;            // No default reply
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-static int do_write(struct fsg_dev *fsg)
-{
-        struct fsg_lun          *curlun = fsg->curlun;
-        u32                     lba;
-        struct fsg_buffhd       *bh;
-        int                     get_some_more;
-        u32                     amount_left_to_req, amount_left_to_write;
-        loff_t                  usb_offset, file_offset, file_offset_tmp;
-        unsigned int            amount;
-        ssize_t                 nwritten;
-        int                     rc;
-
-        if (curlun->ro) {
-                curlun->sense_data = SS_WRITE_PROTECTED;
-                return -EINVAL;
-        }
-        spin_lock(&curlun->filp->f_lock);
-        curlun->filp->f_flags &= ~O_SYNC;       // Default is not to wait
-        spin_unlock(&curlun->filp->f_lock);
-
-        /* Get the starting Logical Block Address and check that it's
-         * not too big */
-        if (fsg->cmnd[0] == WRITE_6)
-                lba = get_unaligned_be24(&fsg->cmnd[1]);
-        else {
-                lba = get_unaligned_be32(&fsg->cmnd[2]);
-
-                /* We allow DPO (Disable Page Out = don't save data in the
-                 * cache) and FUA (Force Unit Access = write directly to the
-                 * medium).  We don't implement DPO; we implement FUA by
-                 * performing synchronous output. */
-                if ((fsg->cmnd[1] & ~0x18) != 0) {
-                        curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
-                        return -EINVAL;
-                }
-                /* FUA */
-                if (!curlun->nofua && (fsg->cmnd[1] & 0x08)) {
-                        spin_lock(&curlun->filp->f_lock);
-                        curlun->filp->f_flags |= O_DSYNC;
-                        spin_unlock(&curlun->filp->f_lock);
-                }
-        }
-        if (lba >= curlun->num_sectors) {
-                curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
-                return -EINVAL;
-        }
-
-        /* Carry out the file writes */
-        get_some_more = 1;
-        file_offset = usb_offset = ((loff_t) lba) << curlun->blkbits;
-        amount_left_to_req = amount_left_to_write = fsg->data_size_from_cmnd;
-
-        while (amount_left_to_write > 0) {
-
-                /* Queue a request for more data from the host */
-                bh = fsg->next_buffhd_to_fill;
-                if (bh->state == BUF_STATE_EMPTY && get_some_more) {
-
-                        /* Figure out how much we want to get:
-                         * Try to get the remaining amount,
-                         * but not more than the buffer size.
-                         */
-                        amount = min(amount_left_to_req, mod_data.buflen);
-
-                        /* Beyond the end of the backing file? */
-                        if (usb_offset >= curlun->file_length) {
-                                get_some_more = 0;
-                                curlun->sense_data =
-                                        SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
-                                curlun->sense_data_info = usb_offset >> curlun->blkbits;
-                                curlun->info_valid = 1;
-                                continue;
-                        }
-
-                        /* Get the next buffer */
-                        usb_offset += amount;
-                        fsg->usb_amount_left -= amount;
-                        amount_left_to_req -= amount;
-                        if (amount_left_to_req == 0)
-                                get_some_more = 0;
-
-                        /* Except at the end of the transfer, amount will be
-                         * equal to the buffer size, which is divisible by
-                         * the bulk-out maxpacket size.
-                         */
-                        set_bulk_out_req_length(fsg, bh, amount);
-                        start_transfer(fsg, fsg->bulk_out, bh->outreq,
-                                        &bh->outreq_busy, &bh->state);
-                        fsg->next_buffhd_to_fill = bh->next;
-                        continue;
-                }
-
-                /* Write the received data to the backing file */
-                bh = fsg->next_buffhd_to_drain;
-                if (bh->state == BUF_STATE_EMPTY && !get_some_more)
-                        break;                  // We stopped early
-                if (bh->state == BUF_STATE_FULL) {
-                        smp_rmb();
-                        fsg->next_buffhd_to_drain = bh->next;
-                        bh->state = BUF_STATE_EMPTY;
-
-                        /* Did something go wrong with the transfer? */
-                        if (bh->outreq->status != 0) {
-                                curlun->sense_data = SS_COMMUNICATION_FAILURE;
-                                curlun->sense_data_info = file_offset >> curlun->blkbits;
-                                curlun->info_valid = 1;
-                                break;
-                        }
-
-                        amount = bh->outreq->actual;
-                        if (curlun->file_length - file_offset < amount) {
-                                LERROR(curlun,
-        "write %u @ %llu beyond end %llu\n",
-        amount, (unsigned long long) file_offset,
-        (unsigned long long) curlun->file_length);
-                                amount = curlun->file_length - file_offset;
-                        }
-
-                        /* Don't accept excess data.  The spec doesn't say
-                         * what to do in this case.  We'll ignore the error.
-                         */
-                        amount = min(amount, bh->bulk_out_intended_length);
-
-                        /* Don't write a partial block */
-                        amount = round_down(amount, curlun->blksize);
-                        if (amount == 0)
-                                goto empty_write;
-
-                        /* Perform the write */
-                        file_offset_tmp = file_offset;
-                        nwritten = vfs_write(curlun->filp,
-                                        (char __user *) bh->buf,
-                                        amount, &file_offset_tmp);
-                        VLDBG(curlun, "file write %u @ %llu -> %d\n", amount,
-                                        (unsigned long long) file_offset,
-                                        (int) nwritten);
-                        if (signal_pending(current))
-                                return -EINTR;          // Interrupted!
-
-                        if (nwritten < 0) {
-                                LDBG(curlun, "error in file write: %d\n",
-                                                (int) nwritten);
-                                nwritten = 0;
-                        } else if (nwritten < amount) {
-                                LDBG(curlun, "partial file write: %d/%u\n",
-                                                (int) nwritten, amount);
-                                nwritten = round_down(nwritten, curlun->blksize);
-                        }
-                        file_offset += nwritten;
-                        amount_left_to_write -= nwritten;
-                        fsg->residue -= nwritten;
-
-                        /* If an error occurred, report it and its position */
-                        if (nwritten < amount) {
-                                curlun->sense_data = SS_WRITE_ERROR;
-                                curlun->sense_data_info = file_offset >> curlun->blkbits;
-                                curlun->info_valid = 1;
-                                break;
-                        }
-
- empty_write:
-                        /* Did the host decide to stop early? */
-                        if (bh->outreq->actual < bh->bulk_out_intended_length) {
-                                fsg->short_packet_received = 1;
-                                break;
-                        }
-                        continue;
-                }
-
-                /* Wait for something to happen */
-                rc = sleep_thread(fsg);
-                if (rc)
-                        return rc;
-        }
-
-        return -EIO;            // No default reply
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-static int do_synchronize_cache(struct fsg_dev *fsg)
-{
-        struct fsg_lun  *curlun = fsg->curlun;
-        int             rc;
-
-        /* We ignore the requested LBA and write out all file's
-         * dirty data buffers. */
-        rc = fsg_lun_fsync_sub(curlun);
-        if (rc)
-                curlun->sense_data = SS_WRITE_ERROR;
-        return 0;
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-static void invalidate_sub(struct fsg_lun *curlun)
-{
-        struct file     *filp = curlun->filp;
-        struct inode    *inode = filp->f_path.dentry->d_inode;
-        unsigned long   rc;
-
-        rc = invalidate_mapping_pages(inode->i_mapping, 0, -1);
-        VLDBG(curlun, "invalidate_mapping_pages -> %ld\n", rc);
-}
-
-static int do_verify(struct fsg_dev *fsg)
-{
-        struct fsg_lun          *curlun = fsg->curlun;
-        u32                     lba;
-        u32                     verification_length;
-        struct fsg_buffhd       *bh = fsg->next_buffhd_to_fill;
-        loff_t                  file_offset, file_offset_tmp;
-        u32                     amount_left;
-        unsigned int            amount;
-        ssize_t                 nread;
-
-        /* Get the starting Logical Block Address and check that it's
-         * not too big */
-        lba = get_unaligned_be32(&fsg->cmnd[2]);
-        if (lba >= curlun->num_sectors) {
-                curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
-                return -EINVAL;
-        }
-
-        /* We allow DPO (Disable Page Out = don't save data in the
-         * cache) but we don't implement it. */
-        if ((fsg->cmnd[1] & ~0x10) != 0) {
-                curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
-                return -EINVAL;
-        }
-
-        verification_length = get_unaligned_be16(&fsg->cmnd[7]);
-        if (unlikely(verification_length == 0))
-                return -EIO;            // No default reply
-
-        /* Prepare to carry out the file verify */
-        amount_left = verification_length << curlun->blkbits;
-        file_offset = ((loff_t) lba) << curlun->blkbits;
-
-        /* Write out all the dirty buffers before invalidating them */
-        fsg_lun_fsync_sub(curlun);
-        if (signal_pending(current))
-                return -EINTR;
-
-        invalidate_sub(curlun);
-        if (signal_pending(current))
-                return -EINTR;
-
-        /* Just try to read the requested blocks */
-        while (amount_left > 0) {
-
-                /* Figure out how much we need to read:
-                 * Try to read the remaining amount, but not more than
-                 * the buffer size.
-                 * And don't try to read past the end of the file.
-                 */
-                amount = min((unsigned int) amount_left, mod_data.buflen);
-                amount = min((loff_t) amount,
-                                curlun->file_length - file_offset);
-                if (amount == 0) {
-                        curlun->sense_data =
-                                        SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
-                        curlun->sense_data_info = file_offset >> curlun->blkbits;
-                        curlun->info_valid = 1;
-                        break;
-                }
-
-                /* Perform the read */
-                file_offset_tmp = file_offset;
-                nread = vfs_read(curlun->filp,
-                                (char __user *) bh->buf,
-                                amount, &file_offset_tmp);
-                VLDBG(curlun, "file read %u @ %llu -> %d\n", amount,
-                                (unsigned long long) file_offset,
-                                (int) nread);
-                if (signal_pending(current))
-                        return -EINTR;
-
-                if (nread < 0) {
-                        LDBG(curlun, "error in file verify: %d\n",
-                                        (int) nread);
-                        nread = 0;
-                } else if (nread < amount) {
-                        LDBG(curlun, "partial file verify: %d/%u\n",
-                                        (int) nread, amount);
-                        nread = round_down(nread, curlun->blksize);
-                }
-                if (nread == 0) {
-                        curlun->sense_data = SS_UNRECOVERED_READ_ERROR;
-                        curlun->sense_data_info = file_offset >> curlun->blkbits;
-                        curlun->info_valid = 1;
-                        break;
-                }
-                file_offset += nread;
-                amount_left -= nread;
-        }
-        return 0;
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-static int do_inquiry(struct fsg_dev *fsg, struct fsg_buffhd *bh)
-{
-        u8      *buf = (u8 *) bh->buf;
-
-        static char vendor_id[] = "Linux   ";
-        static char product_disk_id[] = "File-Stor Gadget";
-        static char product_cdrom_id[] = "File-CD Gadget  ";
-
-        if (!fsg->curlun) {             // Unsupported LUNs are okay
-                fsg->bad_lun_okay = 1;
-                memset(buf, 0, 36);
-                buf[0] = 0x7f;          // Unsupported, no device-type
-                buf[4] = 31;            // Additional length
-                return 36;
-        }
-
-        memset(buf, 0, 8);
-        buf[0] = (mod_data.cdrom ? TYPE_ROM : TYPE_DISK);
-        if (mod_data.removable)
-                buf[1] = 0x80;
-        buf[2] = 2;             // ANSI SCSI level 2
-        buf[3] = 2;             // SCSI-2 INQUIRY data format
-        buf[4] = 31;            // Additional length
-                                // No special options
-        sprintf(buf + 8, "%-8s%-16s%04x", vendor_id,
-                        (mod_data.cdrom ? product_cdrom_id :
-                                product_disk_id),
-                        mod_data.release);
-        return 36;
-}
-
-
-static int do_request_sense(struct fsg_dev *fsg, struct fsg_buffhd *bh)
-{
-        struct fsg_lun  *curlun = fsg->curlun;
-        u8              *buf = (u8 *) bh->buf;
-        u32             sd, sdinfo;
-        int             valid;
-
-        /*
-         * From the SCSI-2 spec., section 7.9 (Unit attention condition):
-         *
-         * If a REQUEST SENSE command is received from an initiator
-         * with a pending unit attention condition (before the target
-         * generates the contingent allegiance condition), then the
-         * target shall either:
-         *   a) report any pending sense data and preserve the unit
-         *      attention condition on the logical unit, or,
-         *   b) report the unit attention condition, may discard any
-         *      pending sense data, and clear the unit attention
-         *      condition on the logical unit for that initiator.
-         *
-         * FSG normally uses option a); enable this code to use option b).
-         */
-#if 0
-        if (curlun && curlun->unit_attention_data != SS_NO_SENSE) {
-                curlun->sense_data = curlun->unit_attention_data;
-                curlun->unit_attention_data = SS_NO_SENSE;
-        }
-#endif
-
-        if (!curlun) {          // Unsupported LUNs are okay
-                fsg->bad_lun_okay = 1;
-                sd = SS_LOGICAL_UNIT_NOT_SUPPORTED;
-                sdinfo = 0;
-                valid = 0;
-        } else {
-                sd = curlun->sense_data;
-                sdinfo = curlun->sense_data_info;
-                valid = curlun->info_valid << 7;
-                curlun->sense_data = SS_NO_SENSE;
-                curlun->sense_data_info = 0;
-                curlun->info_valid = 0;
-        }
-
-        memset(buf, 0, 18);
-        buf[0] = valid | 0x70;                  // Valid, current error
-        buf[2] = SK(sd);
-        put_unaligned_be32(sdinfo, &buf[3]);    /* Sense information */
-        buf[7] = 18 - 8;                        // Additional sense length
-        buf[12] = ASC(sd);
-        buf[13] = ASCQ(sd);
-        return 18;
-}
-
-
-static int do_read_capacity(struct fsg_dev *fsg, struct fsg_buffhd *bh)
-{
-        struct fsg_lun  *curlun = fsg->curlun;
-        u32             lba = get_unaligned_be32(&fsg->cmnd[2]);
-        int             pmi = fsg->cmnd[8];
-        u8              *buf = (u8 *) bh->buf;
-
-        /* Check the PMI and LBA fields */
-        if (pmi > 1 || (pmi == 0 && lba != 0)) {
-                curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
-                return -EINVAL;
-        }
-
-        put_unaligned_be32(curlun->num_sectors - 1, &buf[0]);
-                                                /* Max logical block */
-        put_unaligned_be32(curlun->blksize, &buf[4]);   /* Block length */
-        return 8;
-}
-
-
-static int do_read_header(struct fsg_dev *fsg, struct fsg_buffhd *bh)
-{
-        struct fsg_lun  *curlun = fsg->curlun;
-        int             msf = fsg->cmnd[1] & 0x02;
-        u32             lba = get_unaligned_be32(&fsg->cmnd[2]);
-        u8              *buf = (u8 *) bh->buf;
-
-        if ((fsg->cmnd[1] & ~0x02) != 0) {              /* Mask away MSF */
-                curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
-                return -EINVAL;
-        }
-        if (lba >= curlun->num_sectors) {
-                curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
-                return -EINVAL;
-        }
-
-        memset(buf, 0, 8);
-        buf[0] = 0x01;          /* 2048 bytes of user data, rest is EC */
-        store_cdrom_address(&buf[4], msf, lba);
-        return 8;
-}
-
-
-static int do_read_toc(struct fsg_dev *fsg, struct fsg_buffhd *bh)
-{
-        struct fsg_lun  *curlun = fsg->curlun;
-        int             msf = fsg->cmnd[1] & 0x02;
-        int             start_track = fsg->cmnd[6];
-        u8              *buf = (u8 *) bh->buf;
-
-        if ((fsg->cmnd[1] & ~0x02) != 0 ||              /* Mask away MSF */
-                        start_track > 1) {
-                curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
-                return -EINVAL;
-        }
-
-        memset(buf, 0, 20);
-        buf[1] = (20-2);                /* TOC data length */
-        buf[2] = 1;                     /* First track number */
-        buf[3] = 1;                     /* Last track number */
-        buf[5] = 0x16;                  /* Data track, copying allowed */
-        buf[6] = 0x01;                  /* Only track is number 1 */
-        store_cdrom_address(&buf[8], msf, 0);
-
-        buf[13] = 0x16;                 /* Lead-out track is data */
-        buf[14] = 0xAA;                 /* Lead-out track number */
-        store_cdrom_address(&buf[16], msf, curlun->num_sectors);
-        return 20;
-}
-
-
-static int do_mode_sense(struct fsg_dev *fsg, struct fsg_buffhd *bh)
-{
-        struct fsg_lun  *curlun = fsg->curlun;
-        int             mscmnd = fsg->cmnd[0];
-        u8              *buf = (u8 *) bh->buf;
-        u8              *buf0 = buf;
-        int             pc, page_code;
-        int             changeable_values, all_pages;
-        int             valid_page = 0;
-        int             len, limit;
-
-        if ((fsg->cmnd[1] & ~0x08) != 0) {              // Mask away DBD
-                curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
-                return -EINVAL;
-        }
-        pc = fsg->cmnd[2] >> 6;
-        page_code = fsg->cmnd[2] & 0x3f;
-        if (pc == 3) {
-                curlun->sense_data = SS_SAVING_PARAMETERS_NOT_SUPPORTED;
-                return -EINVAL;
-        }
-        changeable_values = (pc == 1);
-        all_pages = (page_code == 0x3f);
-
-        /* Write the mode parameter header.  Fixed values are: default
-         * medium type, no cache control (DPOFUA), and no block descriptors.
-         * The only variable value is the WriteProtect bit.  We will fill in
-         * the mode data length later. */
-        memset(buf, 0, 8);
-        if (mscmnd == MODE_SENSE) {
-                buf[2] = (curlun->ro ? 0x80 : 0x00);            // WP, DPOFUA
-                buf += 4;
-                limit = 255;
-        } else {                        // MODE_SENSE_10
-                buf[3] = (curlun->ro ? 0x80 : 0x00);            // WP, DPOFUA
-                buf += 8;
-                limit = 65535;          // Should really be mod_data.buflen
-        }
-
-        /* No block descriptors */
-
-        /* The mode pages, in numerical order.  The only page we support
-         * is the Caching page. */
-        if (page_code == 0x08 || all_pages) {
-                valid_page = 1;
-                buf[0] = 0x08;          // Page code
-                buf[1] = 10;            // Page length
-                memset(buf+2, 0, 10);   // None of the fields are changeable
-
-                if (!changeable_values) {
-                        buf[2] = 0x04;  // Write cache enable,
-                                        // Read cache not disabled
-                                        // No cache retention priorities
-                        put_unaligned_be16(0xffff, &buf[4]);
-                                        /* Don't disable prefetch */
-                                        /* Minimum prefetch = 0 */
-                        put_unaligned_be16(0xffff, &buf[8]);
-                                        /* Maximum prefetch */
-                        put_unaligned_be16(0xffff, &buf[10]);
-                                        /* Maximum prefetch ceiling */
-                }
-                buf += 12;
-        }
-
-        /* Check that a valid page was requested and the mode data length
-         * isn't too long. */
-        len = buf - buf0;
-        if (!valid_page || len > limit) {
-                curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
-                return -EINVAL;
-        }
-
-        /*  Store the mode data length */
-        if (mscmnd == MODE_SENSE)
-                buf0[0] = len - 1;
-        else
-                put_unaligned_be16(len - 2, buf0);
-        return len;
-}
-
-
-static int do_start_stop(struct fsg_dev *fsg)
-{
-        struct fsg_lun  *curlun = fsg->curlun;
-        int             loej, start;
-
-        if (!mod_data.removable) {
-                curlun->sense_data = SS_INVALID_COMMAND;
-                return -EINVAL;
-        }
-
-        // int immed = fsg->cmnd[1] & 0x01;
-        loej = fsg->cmnd[4] & 0x02;
-        start = fsg->cmnd[4] & 0x01;
-
-#ifdef CONFIG_USB_FILE_STORAGE_TEST
-        if ((fsg->cmnd[1] & ~0x01) != 0 ||              // Mask away Immed
-                        (fsg->cmnd[4] & ~0x03) != 0) {  // Mask LoEj, Start
-                curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
-                return -EINVAL;
-        }
-
-        if (!start) {
-
-                /* Are we allowed to unload the media? */
-                if (curlun->prevent_medium_removal) {
-                        LDBG(curlun, "unload attempt prevented\n");
-                        curlun->sense_data = SS_MEDIUM_REMOVAL_PREVENTED;
-                        return -EINVAL;
-                }
-                if (loej) {             // Simulate an unload/eject
-                        up_read(&fsg->filesem);
-                        down_write(&fsg->filesem);
-                        fsg_lun_close(curlun);
-                        up_write(&fsg->filesem);
-                        down_read(&fsg->filesem);
-                }
-        } else {
-
-                /* Our emulation doesn't support mounting; the medium is
-                 * available for use as soon as it is loaded. */
-                if (!fsg_lun_is_open(curlun)) {
-                        curlun->sense_data = SS_MEDIUM_NOT_PRESENT;
-                        return -EINVAL;
-                }
-        }
-#endif
-        return 0;
-}
-
-
-static int do_prevent_allow(struct fsg_dev *fsg)
-{
-        struct fsg_lun  *curlun = fsg->curlun;
-        int             prevent;
-
-        if (!mod_data.removable) {
-                curlun->sense_data = SS_INVALID_COMMAND;
-                return -EINVAL;
-        }
-
-        prevent = fsg->cmnd[4] & 0x01;
-        if ((fsg->cmnd[4] & ~0x01) != 0) {              // Mask away Prevent
-                curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
-                return -EINVAL;
-        }
-
-        if (curlun->prevent_medium_removal && !prevent)
-                fsg_lun_fsync_sub(curlun);
-        curlun->prevent_medium_removal = prevent;
-        return 0;
-}
-
-
-static int do_read_format_capacities(struct fsg_dev *fsg,
-                        struct fsg_buffhd *bh)
-{
-        struct fsg_lun  *curlun = fsg->curlun;
-        u8              *buf = (u8 *) bh->buf;
-
-        buf[0] = buf[1] = buf[2] = 0;
-        buf[3] = 8;             // Only the Current/Maximum Capacity Descriptor
-        buf += 4;
-
-        put_unaligned_be32(curlun->num_sectors, &buf[0]);
-                                                /* Number of blocks */
-        put_unaligned_be32(curlun->blksize, &buf[4]);   /* Block length */
-        buf[4] = 0x02;                          /* Current capacity */
-        return 12;
-}
-
-
-static int do_mode_select(struct fsg_dev *fsg, struct fsg_buffhd *bh)
-{
-        struct fsg_lun  *curlun = fsg->curlun;
-
-        /* We don't support MODE SELECT */
-        curlun->sense_data = SS_INVALID_COMMAND;
-        return -EINVAL;
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-static int halt_bulk_in_endpoint(struct fsg_dev *fsg)
-{
-        int     rc;
-
-        rc = fsg_set_halt(fsg, fsg->bulk_in);
-        if (rc == -EAGAIN)
-                VDBG(fsg, "delayed bulk-in endpoint halt\n");
-        while (rc != 0) {
-                if (rc != -EAGAIN) {
-                        WARNING(fsg, "usb_ep_set_halt -> %d\n", rc);
-                        rc = 0;
-                        break;
-                }
-
-                /* Wait for a short time and then try again */
-                if (msleep_interruptible(100) != 0)
-                        return -EINTR;
-                rc = usb_ep_set_halt(fsg->bulk_in);
-        }
-        return rc;
-}
-
-static int wedge_bulk_in_endpoint(struct fsg_dev *fsg)
-{
-        int     rc;
-
-        DBG(fsg, "bulk-in set wedge\n");
-        rc = usb_ep_set_wedge(fsg->bulk_in);
-        if (rc == -EAGAIN)
-                VDBG(fsg, "delayed bulk-in endpoint wedge\n");
-        while (rc != 0) {
-                if (rc != -EAGAIN) {
-                        WARNING(fsg, "usb_ep_set_wedge -> %d\n", rc);
-                        rc = 0;
-                        break;
-                }
-
-                /* Wait for a short time and then try again */
-                if (msleep_interruptible(100) != 0)
-                        return -EINTR;
-                rc = usb_ep_set_wedge(fsg->bulk_in);
-        }
-        return rc;
-}
-
-static int throw_away_data(struct fsg_dev *fsg)
-{
-        struct fsg_buffhd       *bh;
-        u32                     amount;
-        int                     rc;
-
-        while ((bh = fsg->next_buffhd_to_drain)->state != BUF_STATE_EMPTY ||
-                        fsg->usb_amount_left > 0) {
-
-                /* Throw away the data in a filled buffer */
-                if (bh->state == BUF_STATE_FULL) {
-                        smp_rmb();
-                        bh->state = BUF_STATE_EMPTY;
-                        fsg->next_buffhd_to_drain = bh->next;
-
-                        /* A short packet or an error ends everything */
-                        if (bh->outreq->actual < bh->bulk_out_intended_length ||
-                                        bh->outreq->status != 0) {
-                                raise_exception(fsg, FSG_STATE_ABORT_BULK_OUT);
-                                return -EINTR;
-                        }
-                        continue;
-                }
-
-                /* Try to submit another request if we need one */
-                bh = fsg->next_buffhd_to_fill;
-                if (bh->state == BUF_STATE_EMPTY && fsg->usb_amount_left > 0) {
-                        amount = min(fsg->usb_amount_left,
-                                        (u32) mod_data.buflen);
-
-                        /* Except at the end of the transfer, amount will be
-                         * equal to the buffer size, which is divisible by
-                         * the bulk-out maxpacket size.
-                         */
-                        set_bulk_out_req_length(fsg, bh, amount);
-                        start_transfer(fsg, fsg->bulk_out, bh->outreq,
-                                        &bh->outreq_busy, &bh->state);
-                        fsg->next_buffhd_to_fill = bh->next;
-                        fsg->usb_amount_left -= amount;
-                        continue;
-                }
-
-                /* Otherwise wait for something to happen */
-                rc = sleep_thread(fsg);
-                if (rc)
-                        return rc;
-        }
-        return 0;
-}
-
-
-static int finish_reply(struct fsg_dev *fsg)
-{
-        struct fsg_buffhd       *bh = fsg->next_buffhd_to_fill;
-        int                     rc = 0;
-
-        switch (fsg->data_dir) {
-        case DATA_DIR_NONE:
-                break;                  // Nothing to send
-
-        /* If we don't know whether the host wants to read or write,
-         * this must be CB or CBI with an unknown command.  We mustn't
-         * try to send or receive any data.  So stall both bulk pipes
-         * if we can and wait for a reset. */
-        case DATA_DIR_UNKNOWN:
-                if (mod_data.can_stall) {
-                        fsg_set_halt(fsg, fsg->bulk_out);
-                        rc = halt_bulk_in_endpoint(fsg);
-                }
-                break;
-
-        /* All but the last buffer of data must have already been sent */
-        case DATA_DIR_TO_HOST:
-                if (fsg->data_size == 0)
-                        ;               // Nothing to send
-
-                /* If there's no residue, simply send the last buffer */
-                else if (fsg->residue == 0) {
-                        bh->inreq->zero = 0;
-                        start_transfer(fsg, fsg->bulk_in, bh->inreq,
-                                        &bh->inreq_busy, &bh->state);
-                        fsg->next_buffhd_to_fill = bh->next;
-                }
-
-                /* There is a residue.  For CB and CBI, simply mark the end
-                 * of the data with a short packet.  However, if we are
-                 * allowed to stall, there was no data at all (residue ==
-                 * data_size), and the command failed (invalid LUN or
-                 * sense data is set), then halt the bulk-in endpoint
-                 * instead. */
-                else if (!transport_is_bbb()) {
-                        if (mod_data.can_stall &&
-                                        fsg->residue == fsg->data_size &&
-        (!fsg->curlun || fsg->curlun->sense_data != SS_NO_SENSE)) {
-                                bh->state = BUF_STATE_EMPTY;
-                                rc = halt_bulk_in_endpoint(fsg);
-                        } else {
-                                bh->inreq->zero = 1;
-                                start_transfer(fsg, fsg->bulk_in, bh->inreq,
-                                                &bh->inreq_busy, &bh->state);
-                                fsg->next_buffhd_to_fill = bh->next;
-                        }
-                }
-
-                /*
-                 * For Bulk-only, mark the end of the data with a short
-                 * packet.  If we are allowed to stall, halt the bulk-in
-                 * endpoint.  (Note: This violates the Bulk-Only Transport
-                 * specification, which requires us to pad the data if we
-                 * don't halt the endpoint.  Presumably nobody will mind.)
-                 */
-                else {
-                        bh->inreq->zero = 1;
-                        start_transfer(fsg, fsg->bulk_in, bh->inreq,
-                                        &bh->inreq_busy, &bh->state);
-                        fsg->next_buffhd_to_fill = bh->next;
-                        if (mod_data.can_stall)
-                                rc = halt_bulk_in_endpoint(fsg);
-                }
-                break;
-
-        /* We have processed all we want from the data the host has sent.
-         * There may still be outstanding bulk-out requests. */
-        case DATA_DIR_FROM_HOST:
-                if (fsg->residue == 0)
-                        ;               // Nothing to receive
-
-                /* Did the host stop sending unexpectedly early? */
-                else if (fsg->short_packet_received) {
-                        raise_exception(fsg, FSG_STATE_ABORT_BULK_OUT);
-                        rc = -EINTR;
-                }
-
-                /* We haven't processed all the incoming data.  Even though
-                 * we may be allowed to stall, doing so would cause a race.
-                 * The controller may already have ACK'ed all the remaining
-                 * bulk-out packets, in which case the host wouldn't see a
-                 * STALL.  Not realizing the endpoint was halted, it wouldn't
-                 * clear the halt -- leading to problems later on. */
-#if 0
-                else if (mod_data.can_stall) {
-                        fsg_set_halt(fsg, fsg->bulk_out);
-                        raise_exception(fsg, FSG_STATE_ABORT_BULK_OUT);
-                        rc = -EINTR;
-                }
-#endif
-
-                /* We can't stall.  Read in the excess data and throw it
-                 * all away. */
-                else
-                        rc = throw_away_data(fsg);
-                break;
-        }
-        return rc;
-}
-
-
-static int send_status(struct fsg_dev *fsg)
-{
-        struct fsg_lun          *curlun = fsg->curlun;
-        struct fsg_buffhd       *bh;
-        int                     rc;
-        u8                      status = US_BULK_STAT_OK;
-        u32                     sd, sdinfo = 0;
-
-        /* Wait for the next buffer to become available */
-        bh = fsg->next_buffhd_to_fill;
-        while (bh->state != BUF_STATE_EMPTY) {
-                rc = sleep_thread(fsg);
-                if (rc)
-                        return rc;
-        }
-
-        if (curlun) {
-                sd = curlun->sense_data;
-                sdinfo = curlun->sense_data_info;
-        } else if (fsg->bad_lun_okay)
-                sd = SS_NO_SENSE;
-        else
-                sd = SS_LOGICAL_UNIT_NOT_SUPPORTED;
-
-        if (fsg->phase_error) {
-                DBG(fsg, "sending phase-error status\n");
-                status = US_BULK_STAT_PHASE;
-                sd = SS_INVALID_COMMAND;
-        } else if (sd != SS_NO_SENSE) {
-                DBG(fsg, "sending command-failure status\n");
-                status = US_BULK_STAT_FAIL;
-                VDBG(fsg, "  sense data: SK x%02x, ASC x%02x, ASCQ x%02x;"
-                                "  info x%x\n",
-                                SK(sd), ASC(sd), ASCQ(sd), sdinfo);
-        }
-
-        if (transport_is_bbb()) {
-                struct bulk_cs_wrap     *csw = bh->buf;
-
-                /* Store and send the Bulk-only CSW */
-                csw->Signature = cpu_to_le32(US_BULK_CS_SIGN);
-                csw->Tag = fsg->tag;
-                csw->Residue = cpu_to_le32(fsg->residue);
-                csw->Status = status;
-
-                bh->inreq->length = US_BULK_CS_WRAP_LEN;
-                bh->inreq->zero = 0;
-                start_transfer(fsg, fsg->bulk_in, bh->inreq,
-                                &bh->inreq_busy, &bh->state);
-
-        } else if (mod_data.transport_type == USB_PR_CB) {
-
-                /* Control-Bulk transport has no status phase! */
-                return 0;
-
-        } else {                        // USB_PR_CBI
-                struct interrupt_data   *buf = bh->buf;
-
-                /* Store and send the Interrupt data.  UFI sends the ASC
-                 * and ASCQ bytes.  Everything else sends a Type (which
-                 * is always 0) and the status Value. */
-                if (mod_data.protocol_type == USB_SC_UFI) {
-                        buf->bType = ASC(sd);
-                        buf->bValue = ASCQ(sd);
-                } else {
-                        buf->bType = 0;
-                        buf->bValue = status;
-                }
-                fsg->intreq->length = CBI_INTERRUPT_DATA_LEN;
-
-                fsg->intr_buffhd = bh;          // Point to the right buffhd
-                fsg->intreq->buf = bh->inreq->buf;
-                fsg->intreq->context = bh;
-                start_transfer(fsg, fsg->intr_in, fsg->intreq,
-                                &fsg->intreq_busy, &bh->state);
-        }
-
-        fsg->next_buffhd_to_fill = bh->next;
-        return 0;
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-/* Check whether the command is properly formed and whether its data size
- * and direction agree with the values we already have. */
-static int check_command(struct fsg_dev *fsg, int cmnd_size,
-                enum data_direction data_dir, unsigned int mask,
-                int needs_medium, const char *name)
-{
-        int                     i;
-        int                     lun = fsg->cmnd[1] >> 5;
-        static const char       dirletter[4] = {'u', 'o', 'i', 'n'};
-        char                    hdlen[20];
-        struct fsg_lun          *curlun;
-
-        /* Adjust the expected cmnd_size for protocol encapsulation padding.
-         * Transparent SCSI doesn't pad. */
-        if (protocol_is_scsi())
-                ;
-
-        /* There's some disagreement as to whether RBC pads commands or not.
-         * We'll play it safe and accept either form. */
-        else if (mod_data.protocol_type == USB_SC_RBC) {
-                if (fsg->cmnd_size == 12)
-                        cmnd_size = 12;
-
-        /* All the other protocols pad to 12 bytes */
-        } else
-                cmnd_size = 12;
-
-        hdlen[0] = 0;
-        if (fsg->data_dir != DATA_DIR_UNKNOWN)
-                sprintf(hdlen, ", H%c=%u", dirletter[(int) fsg->data_dir],
-                                fsg->data_size);
-        VDBG(fsg, "SCSI command: %s;  Dc=%d, D%c=%u;  Hc=%d%s\n",
-                        name, cmnd_size, dirletter[(int) data_dir],
-                        fsg->data_size_from_cmnd, fsg->cmnd_size, hdlen);
-
-        /* We can't reply at all until we know the correct data direction
-         * and size. */
-        if (fsg->data_size_from_cmnd == 0)
-                data_dir = DATA_DIR_NONE;
-        if (fsg->data_dir == DATA_DIR_UNKNOWN) {        // CB or CBI
-                fsg->data_dir = data_dir;
-                fsg->data_size = fsg->data_size_from_cmnd;
-
-        } else {                                        // Bulk-only
-                if (fsg->data_size < fsg->data_size_from_cmnd) {
-
-                        /* Host data size < Device data size is a phase error.
-                         * Carry out the command, but only transfer as much
-                         * as we are allowed. */
-                        fsg->data_size_from_cmnd = fsg->data_size;
-                        fsg->phase_error = 1;
-                }
-        }
-        fsg->residue = fsg->usb_amount_left = fsg->data_size;
-
-        /* Conflicting data directions is a phase error */
-        if (fsg->data_dir != data_dir && fsg->data_size_from_cmnd > 0) {
-                fsg->phase_error = 1;
-                return -EINVAL;
-        }
-
-        /* Verify the length of the command itself */
-        if (cmnd_size != fsg->cmnd_size) {
-
-                /* Special case workaround: There are plenty of buggy SCSI
-                 * implementations. Many have issues with cbw->Length
-                 * field passing a wrong command size. For those cases we
-                 * always try to work around the problem by using the length
-                 * sent by the host side provided it is at least as large
-                 * as the correct command length.
-                 * Examples of such cases would be MS-Windows, which issues
-                 * REQUEST SENSE with cbw->Length == 12 where it should
-                 * be 6, and xbox360 issuing INQUIRY, TEST UNIT READY and
-                 * REQUEST SENSE with cbw->Length == 10 where it should
-                 * be 6 as well.
-                 */
-                if (cmnd_size <= fsg->cmnd_size) {
-                        DBG(fsg, "%s is buggy! Expected length %d "
-                                        "but we got %d\n", name,
-                                        cmnd_size, fsg->cmnd_size);
-                        cmnd_size = fsg->cmnd_size;
-                } else {
-                        fsg->phase_error = 1;
-                        return -EINVAL;
-                }
-        }
-
-        /* Check that the LUN values are consistent */
-        if (transport_is_bbb()) {
-                if (fsg->lun != lun)
-                        DBG(fsg, "using LUN %d from CBW, "
-                                        "not LUN %d from CDB\n",
-                                        fsg->lun, lun);
-        }
-
-        /* Check the LUN */
-        curlun = fsg->curlun;
-        if (curlun) {
-                if (fsg->cmnd[0] != REQUEST_SENSE) {
-                        curlun->sense_data = SS_NO_SENSE;
-                        curlun->sense_data_info = 0;
-                        curlun->info_valid = 0;
-                }
-        } else {
-                fsg->bad_lun_okay = 0;
-
-                /* INQUIRY and REQUEST SENSE commands are explicitly allowed
-                 * to use unsupported LUNs; all others may not. */
-                if (fsg->cmnd[0] != INQUIRY &&
-                                fsg->cmnd[0] != REQUEST_SENSE) {
-                        DBG(fsg, "unsupported LUN %d\n", fsg->lun);
-                        return -EINVAL;
-                }
-        }
-
-        /* If a unit attention condition exists, only INQUIRY and
-         * REQUEST SENSE commands are allowed; anything else must fail. */
-        if (curlun && curlun->unit_attention_data != SS_NO_SENSE &&
-                        fsg->cmnd[0] != INQUIRY &&
-                        fsg->cmnd[0] != REQUEST_SENSE) {
-                curlun->sense_data = curlun->unit_attention_data;
-                curlun->unit_attention_data = SS_NO_SENSE;
-                return -EINVAL;
-        }
-
-        /* Check that only command bytes listed in the mask are non-zero */
-        fsg->cmnd[1] &= 0x1f;                   // Mask away the LUN
-        for (i = 1; i < cmnd_size; ++i) {
-                if (fsg->cmnd[i] && !(mask & (1 << i))) {
-                        if (curlun)
-                                curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
-                        return -EINVAL;
-                }
-        }
-
-        /* If the medium isn't mounted and the command needs to access
-         * it, return an error. */
-        if (curlun && !fsg_lun_is_open(curlun) && needs_medium) {
-                curlun->sense_data = SS_MEDIUM_NOT_PRESENT;
-                return -EINVAL;
-        }
-
-        return 0;
-}
-
-/* wrapper of check_command for data size in blocks handling */
-static int check_command_size_in_blocks(struct fsg_dev *fsg, int cmnd_size,
-                enum data_direction data_dir, unsigned int mask,
-                int needs_medium, const char *name)
-{
-        if (fsg->curlun)
-                fsg->data_size_from_cmnd <<= fsg->curlun->blkbits;
-        return check_command(fsg, cmnd_size, data_dir,
-                        mask, needs_medium, name);
-}
-
-static int do_scsi_command(struct fsg_dev *fsg)
-{
-        struct fsg_buffhd       *bh;
-        int                     rc;
-        int                     reply = -EINVAL;
-        int                     i;
-        static char             unknown[16];
-
-        dump_cdb(fsg);
-
-        /* Wait for the next buffer to become available for data or status */
-        bh = fsg->next_buffhd_to_drain = fsg->next_buffhd_to_fill;
-        while (bh->state != BUF_STATE_EMPTY) {
-                rc = sleep_thread(fsg);
-                if (rc)
-                        return rc;
-        }
-        fsg->phase_error = 0;
-        fsg->short_packet_received = 0;
-
-        down_read(&fsg->filesem);       // We're using the backing file
-        switch (fsg->cmnd[0]) {
-
-        case INQUIRY:
-                fsg->data_size_from_cmnd = fsg->cmnd[4];
-                if ((reply = check_command(fsg, 6, DATA_DIR_TO_HOST,
-                                (1<<4), 0,
-                                "INQUIRY")) == 0)
-                        reply = do_inquiry(fsg, bh);
-                break;
-
-        case MODE_SELECT:
-                fsg->data_size_from_cmnd = fsg->cmnd[4];
-                if ((reply = check_command(fsg, 6, DATA_DIR_FROM_HOST,
-                                (1<<1) | (1<<4), 0,
-                                "MODE SELECT(6)")) == 0)
-                        reply = do_mode_select(fsg, bh);
-                break;
-
-        case MODE_SELECT_10:
-                fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]);
-                if ((reply = check_command(fsg, 10, DATA_DIR_FROM_HOST,
-                                (1<<1) | (3<<7), 0,
-                                "MODE SELECT(10)")) == 0)
-                        reply = do_mode_select(fsg, bh);
-                break;
-
-        case MODE_SENSE:
-                fsg->data_size_from_cmnd = fsg->cmnd[4];
-                if ((reply = check_command(fsg, 6, DATA_DIR_TO_HOST,
-                                (1<<1) | (1<<2) | (1<<4), 0,
-                                "MODE SENSE(6)")) == 0)
-                        reply = do_mode_sense(fsg, bh);
-                break;
-
-        case MODE_SENSE_10:
-                fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]);
-                if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST,
-                                (1<<1) | (1<<2) | (3<<7), 0,
-                                "MODE SENSE(10)")) == 0)
-                        reply = do_mode_sense(fsg, bh);
-                break;
-
-        case ALLOW_MEDIUM_REMOVAL:
-                fsg->data_size_from_cmnd = 0;
-                if ((reply = check_command(fsg, 6, DATA_DIR_NONE,
-                                (1<<4), 0,
-                                "PREVENT-ALLOW MEDIUM REMOVAL")) == 0)
-                        reply = do_prevent_allow(fsg);
-                break;
-
-        case READ_6:
-                i = fsg->cmnd[4];
-                fsg->data_size_from_cmnd = (i == 0) ? 256 : i;
-                if ((reply = check_command_size_in_blocks(fsg, 6,
-                                DATA_DIR_TO_HOST,
-                                (7<<1) | (1<<4), 1,
-                                "READ(6)")) == 0)
-                        reply = do_read(fsg);
-                break;
-
-        case READ_10:
-                fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]);
-                if ((reply = check_command_size_in_blocks(fsg, 10,
-                                DATA_DIR_TO_HOST,
-                                (1<<1) | (0xf<<2) | (3<<7), 1,
-                                "READ(10)")) == 0)
-                        reply = do_read(fsg);
-                break;
-
-        case READ_12:
-                fsg->data_size_from_cmnd = get_unaligned_be32(&fsg->cmnd[6]);
-                if ((reply = check_command_size_in_blocks(fsg, 12,
-                                DATA_DIR_TO_HOST,
-                                (1<<1) | (0xf<<2) | (0xf<<6), 1,
-                                "READ(12)")) == 0)
-                        reply = do_read(fsg);
-                break;
-
-        case READ_CAPACITY:
-                fsg->data_size_from_cmnd = 8;
-                if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST,
-                                (0xf<<2) | (1<<8), 1,
-                                "READ CAPACITY")) == 0)
-                        reply = do_read_capacity(fsg, bh);
-                break;
-
-        case READ_HEADER:
-                if (!mod_data.cdrom)
-                        goto unknown_cmnd;
-                fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]);
-                if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST,
-                                (3<<7) | (0x1f<<1), 1,
-                                "READ HEADER")) == 0)
-                        reply = do_read_header(fsg, bh);
-                break;
-
-        case READ_TOC:
-                if (!mod_data.cdrom)
-                        goto unknown_cmnd;
-                fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]);
-                if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST,
-                                (7<<6) | (1<<1), 1,
-                                "READ TOC")) == 0)
-                        reply = do_read_toc(fsg, bh);
-                break;
-
-        case READ_FORMAT_CAPACITIES:
-                fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]);
-                if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST,
-                                (3<<7), 1,
-                                "READ FORMAT CAPACITIES")) == 0)
-                        reply = do_read_format_capacities(fsg, bh);
-                break;
-
-        case REQUEST_SENSE:
-                fsg->data_size_from_cmnd = fsg->cmnd[4];
-                if ((reply = check_command(fsg, 6, DATA_DIR_TO_HOST,
-                                (1<<4), 0,
-                                "REQUEST SENSE")) == 0)
-                        reply = do_request_sense(fsg, bh);
-                break;
-
-        case START_STOP:
-                fsg->data_size_from_cmnd = 0;
-                if ((reply = check_command(fsg, 6, DATA_DIR_NONE,
-                                (1<<1) | (1<<4), 0,
-                                "START-STOP UNIT")) == 0)
-                        reply = do_start_stop(fsg);
-                break;
-
-        case SYNCHRONIZE_CACHE:
-                fsg->data_size_from_cmnd = 0;
-                if ((reply = check_command(fsg, 10, DATA_DIR_NONE,
-                                (0xf<<2) | (3<<7), 1,
-                                "SYNCHRONIZE CACHE")) == 0)
-                        reply = do_synchronize_cache(fsg);
-                break;
-
-        case TEST_UNIT_READY:
-                fsg->data_size_from_cmnd = 0;
-                reply = check_command(fsg, 6, DATA_DIR_NONE,
-                                0, 1,
-                                "TEST UNIT READY");
-                break;
-
-        /* Although optional, this command is used by MS-Windows.  We
-         * support a minimal version: BytChk must be 0. */
-        case VERIFY:
-                fsg->data_size_from_cmnd = 0;
-                if ((reply = check_command(fsg, 10, DATA_DIR_NONE,
-                                (1<<1) | (0xf<<2) | (3<<7), 1,
-                                "VERIFY")) == 0)
-                        reply = do_verify(fsg);
-                break;
-
-        case WRITE_6:
-                i = fsg->cmnd[4];
-                fsg->data_size_from_cmnd = (i == 0) ? 256 : i;
-                if ((reply = check_command_size_in_blocks(fsg, 6,
-                                DATA_DIR_FROM_HOST,
-                                (7<<1) | (1<<4), 1,
-                                "WRITE(6)")) == 0)
-                        reply = do_write(fsg);
-                break;
-
-        case WRITE_10:
-                fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]);
-                if ((reply = check_command_size_in_blocks(fsg, 10,
-                                DATA_DIR_FROM_HOST,
-                                (1<<1) | (0xf<<2) | (3<<7), 1,
-                                "WRITE(10)")) == 0)
-                        reply = do_write(fsg);
-                break;
-
-        case WRITE_12:
-                fsg->data_size_from_cmnd = get_unaligned_be32(&fsg->cmnd[6]);
-                if ((reply = check_command_size_in_blocks(fsg, 12,
-                                DATA_DIR_FROM_HOST,
-                                (1<<1) | (0xf<<2) | (0xf<<6), 1,
-                                "WRITE(12)")) == 0)
-                        reply = do_write(fsg);
-                break;
-
-        /* Some mandatory commands that we recognize but don't implement.
-         * They don't mean much in this setting.  It's left as an exercise
-         * for anyone interested to implement RESERVE and RELEASE in terms
-         * of Posix locks. */
-        case FORMAT_UNIT:
-        case RELEASE:
-        case RESERVE:
-        case SEND_DIAGNOSTIC:
-                // Fall through
-
-        default:
- unknown_cmnd:
-                fsg->data_size_from_cmnd = 0;
-                sprintf(unknown, "Unknown x%02x", fsg->cmnd[0]);
-                if ((reply = check_command(fsg, fsg->cmnd_size,
-                                DATA_DIR_UNKNOWN, ~0, 0, unknown)) == 0) {
-                        fsg->curlun->sense_data = SS_INVALID_COMMAND;
-                        reply = -EINVAL;
-                }
-                break;
-        }
-        up_read(&fsg->filesem);
-
-        if (reply == -EINTR || signal_pending(current))
-                return -EINTR;
-
-        /* Set up the single reply buffer for finish_reply() */
-        if (reply == -EINVAL)
-                reply = 0;              // Error reply length
-        if (reply >= 0 && fsg->data_dir == DATA_DIR_TO_HOST) {
-                reply = min((u32) reply, fsg->data_size_from_cmnd);
-                bh->inreq->length = reply;
-                bh->state = BUF_STATE_FULL;
-                fsg->residue -= reply;
-        }                               // Otherwise it's already set
-
-        return 0;
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-static int received_cbw(struct fsg_dev *fsg, struct fsg_buffhd *bh)
-{
-        struct usb_request              *req = bh->outreq;
-        struct bulk_cb_wrap     *cbw = req->buf;
-
-        /* Was this a real packet?  Should it be ignored? */
-        if (req->status || test_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags))
-                return -EINVAL;
-
-        /* Is the CBW valid? */
-        if (req->actual != US_BULK_CB_WRAP_LEN ||
-                        cbw->Signature != cpu_to_le32(
-                                US_BULK_CB_SIGN)) {
-                DBG(fsg, "invalid CBW: len %u sig 0x%x\n",
-                                req->actual,
-                                le32_to_cpu(cbw->Signature));
-
-                /* The Bulk-only spec says we MUST stall the IN endpoint
-                 * (6.6.1), so it's unavoidable.  It also says we must
-                 * retain this state until the next reset, but there's
-                 * no way to tell the controller driver it should ignore
-                 * Clear-Feature(HALT) requests.
-                 *
-                 * We aren't required to halt the OUT endpoint; instead
-                 * we can simply accept and discard any data received
-                 * until the next reset. */
-                wedge_bulk_in_endpoint(fsg);
-                set_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags);
-                return -EINVAL;
-        }
-
-        /* Is the CBW meaningful? */
-        if (cbw->Lun >= FSG_MAX_LUNS || cbw->Flags & ~US_BULK_FLAG_IN ||
-                        cbw->Length <= 0 || cbw->Length > MAX_COMMAND_SIZE) {
-                DBG(fsg, "non-meaningful CBW: lun = %u, flags = 0x%x, "
-                                "cmdlen %u\n",
-                                cbw->Lun, cbw->Flags, cbw->Length);
-
-                /* We can do anything we want here, so let's stall the
-                 * bulk pipes if we are allowed to. */
-                if (mod_data.can_stall) {
-                        fsg_set_halt(fsg, fsg->bulk_out);
-                        halt_bulk_in_endpoint(fsg);
-                }
-                return -EINVAL;
-        }
-
-        /* Save the command for later */
-        fsg->cmnd_size = cbw->Length;
-        memcpy(fsg->cmnd, cbw->CDB, fsg->cmnd_size);
-        if (cbw->Flags & US_BULK_FLAG_IN)
-                fsg->data_dir = DATA_DIR_TO_HOST;
-        else
-                fsg->data_dir = DATA_DIR_FROM_HOST;
-        fsg->data_size = le32_to_cpu(cbw->DataTransferLength);
-        if (fsg->data_size == 0)
-                fsg->data_dir = DATA_DIR_NONE;
-        fsg->lun = cbw->Lun;
-        fsg->tag = cbw->Tag;
-        return 0;
-}
-
-
-static int get_next_command(struct fsg_dev *fsg)
-{
-        struct fsg_buffhd       *bh;
-        int                     rc = 0;
-
-        if (transport_is_bbb()) {
-
-                /* Wait for the next buffer to become available */
-                bh = fsg->next_buffhd_to_fill;
-                while (bh->state != BUF_STATE_EMPTY) {
-                        rc = sleep_thread(fsg);
-                        if (rc)
-                                return rc;
-                }
-
-                /* Queue a request to read a Bulk-only CBW */
-                set_bulk_out_req_length(fsg, bh, US_BULK_CB_WRAP_LEN);
-                start_transfer(fsg, fsg->bulk_out, bh->outreq,
-                                &bh->outreq_busy, &bh->state);
-
-                /* We will drain the buffer in software, which means we
-                 * can reuse it for the next filling.  No need to advance
-                 * next_buffhd_to_fill. */
-
-                /* Wait for the CBW to arrive */
-                while (bh->state != BUF_STATE_FULL) {
-                        rc = sleep_thread(fsg);
-                        if (rc)
-                                return rc;
-                }
-                smp_rmb();
-                rc = received_cbw(fsg, bh);
-                bh->state = BUF_STATE_EMPTY;
-
-        } else {                // USB_PR_CB or USB_PR_CBI
-
-                /* Wait for the next command to arrive */
-                while (fsg->cbbuf_cmnd_size == 0) {
-                        rc = sleep_thread(fsg);
-                        if (rc)
-                                return rc;
-                }
-
-                /* Is the previous status interrupt request still busy?
-                 * The host is allowed to skip reading the status,
-                 * so we must cancel it. */
-                if (fsg->intreq_busy)
-                        usb_ep_dequeue(fsg->intr_in, fsg->intreq);
-
-                /* Copy the command and mark the buffer empty */
-                fsg->data_dir = DATA_DIR_UNKNOWN;
-                spin_lock_irq(&fsg->lock);
-                fsg->cmnd_size = fsg->cbbuf_cmnd_size;
-                memcpy(fsg->cmnd, fsg->cbbuf_cmnd, fsg->cmnd_size);
-                fsg->cbbuf_cmnd_size = 0;
-                spin_unlock_irq(&fsg->lock);
-
-                /* Use LUN from the command */
-                fsg->lun = fsg->cmnd[1] >> 5;
-        }
-
-        /* Update current lun */
-        if (fsg->lun >= 0 && fsg->lun < fsg->nluns)
-                fsg->curlun = &fsg->luns[fsg->lun];
-        else
-                fsg->curlun = NULL;
-
-        return rc;
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-static int enable_endpoint(struct fsg_dev *fsg, struct usb_ep *ep,
-                const struct usb_endpoint_descriptor *d)
-{
-        int     rc;
-
-        ep->driver_data = fsg;
-        ep->desc = d;
-        rc = usb_ep_enable(ep);
-        if (rc)
-                ERROR(fsg, "can't enable %s, result %d\n", ep->name, rc);
-        return rc;
-}
-
-static int alloc_request(struct fsg_dev *fsg, struct usb_ep *ep,
-                struct usb_request **preq)
-{
-        *preq = usb_ep_alloc_request(ep, GFP_ATOMIC);
-        if (*preq)
-                return 0;
-        ERROR(fsg, "can't allocate request for %s\n", ep->name);
-        return -ENOMEM;
-}
-
-/*
- * Reset interface setting and re-init endpoint state (toggle etc).
- * Call with altsetting < 0 to disable the interface.  The only other
- * available altsetting is 0, which enables the interface.
- */
-static int do_set_interface(struct fsg_dev *fsg, int altsetting)
-{
-        int     rc = 0;
-        int     i;
-        const struct usb_endpoint_descriptor    *d;
-
-        if (fsg->running)
-                DBG(fsg, "reset interface\n");
-
-reset:
-        /* Deallocate the requests */
-        for (i = 0; i < fsg_num_buffers; ++i) {
-                struct fsg_buffhd *bh = &fsg->buffhds[i];
-
-                if (bh->inreq) {
-                        usb_ep_free_request(fsg->bulk_in, bh->inreq);
-                        bh->inreq = NULL;
-                }
-                if (bh->outreq) {
-                        usb_ep_free_request(fsg->bulk_out, bh->outreq);
-                        bh->outreq = NULL;
-                }
-        }
-        if (fsg->intreq) {
-                usb_ep_free_request(fsg->intr_in, fsg->intreq);
-                fsg->intreq = NULL;
-        }
-
-        /* Disable the endpoints */
-        if (fsg->bulk_in_enabled) {
-                usb_ep_disable(fsg->bulk_in);
-                fsg->bulk_in_enabled = 0;
-        }
-        if (fsg->bulk_out_enabled) {
-                usb_ep_disable(fsg->bulk_out);
-                fsg->bulk_out_enabled = 0;
-        }
-        if (fsg->intr_in_enabled) {
-                usb_ep_disable(fsg->intr_in);
-                fsg->intr_in_enabled = 0;
-        }
-
-        fsg->running = 0;
-        if (altsetting < 0 || rc != 0)
-                return rc;
-
-        DBG(fsg, "set interface %d\n", altsetting);
-
-        /* Enable the endpoints */
-        d = fsg_ep_desc(fsg->gadget,
-                        &fsg_fs_bulk_in_desc, &fsg_hs_bulk_in_desc,
-                        &fsg_ss_bulk_in_desc);
-        if ((rc = enable_endpoint(fsg, fsg->bulk_in, d)) != 0)
-                goto reset;
-        fsg->bulk_in_enabled = 1;
-
-        d = fsg_ep_desc(fsg->gadget,
-                        &fsg_fs_bulk_out_desc, &fsg_hs_bulk_out_desc,
-                        &fsg_ss_bulk_out_desc);
-        if ((rc = enable_endpoint(fsg, fsg->bulk_out, d)) != 0)
-                goto reset;
-        fsg->bulk_out_enabled = 1;
-        fsg->bulk_out_maxpacket = usb_endpoint_maxp(d);
-        clear_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags);
-
-        if (transport_is_cbi()) {
-                d = fsg_ep_desc(fsg->gadget,
-                                &fsg_fs_intr_in_desc, &fsg_hs_intr_in_desc,
-                                &fsg_ss_intr_in_desc);
-                if ((rc = enable_endpoint(fsg, fsg->intr_in, d)) != 0)
-                        goto reset;
-                fsg->intr_in_enabled = 1;
-        }
-
-        /* Allocate the requests */
-        for (i = 0; i < fsg_num_buffers; ++i) {
-                struct fsg_buffhd       *bh = &fsg->buffhds[i];
-
-                if ((rc = alloc_request(fsg, fsg->bulk_in, &bh->inreq)) != 0)
-                        goto reset;
-                if ((rc = alloc_request(fsg, fsg->bulk_out, &bh->outreq)) != 0)
-                        goto reset;
-                bh->inreq->buf = bh->outreq->buf = bh->buf;
-                bh->inreq->context = bh->outreq->context = bh;
-                bh->inreq->complete = bulk_in_complete;
-                bh->outreq->complete = bulk_out_complete;
-        }
-        if (transport_is_cbi()) {
-                if ((rc = alloc_request(fsg, fsg->intr_in, &fsg->intreq)) != 0)
-                        goto reset;
-                fsg->intreq->complete = intr_in_complete;
-        }
-
-        fsg->running = 1;
-        for (i = 0; i < fsg->nluns; ++i)
-                fsg->luns[i].unit_attention_data = SS_RESET_OCCURRED;
-        return rc;
-}
-
-
-/*
- * Change our operational configuration.  This code must agree with the code
- * that returns config descriptors, and with interface altsetting code.
- *
- * It's also responsible for power management interactions.  Some
- * configurations might not work with our current power sources.
- * For now we just assume the gadget is always self-powered.
- */
-static int do_set_config(struct fsg_dev *fsg, u8 new_config)
-{
-        int     rc = 0;
-
-        /* Disable the single interface */
-        if (fsg->config != 0) {
-                DBG(fsg, "reset config\n");
-                fsg->config = 0;
-                rc = do_set_interface(fsg, -1);
-        }
-
-        /* Enable the interface */
-        if (new_config != 0) {
-                fsg->config = new_config;
-                if ((rc = do_set_interface(fsg, 0)) != 0)
-                        fsg->config = 0;        // Reset on errors
-                else
-                        INFO(fsg, "%s config #%d\n",
-                             usb_speed_string(fsg->gadget->speed),
-                             fsg->config);
-        }
-        return rc;
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-static void handle_exception(struct fsg_dev *fsg)
-{
-        siginfo_t               info;
-        int                     sig;
-        int                     i;
-        int                     num_active;
-        struct fsg_buffhd       *bh;
-        enum fsg_state          old_state;
-        u8                      new_config;
-        struct fsg_lun          *curlun;
-        unsigned int            exception_req_tag;
-        int                     rc;
-
-        /* Clear the existing signals.  Anything but SIGUSR1 is converted
-         * into a high-priority EXIT exception. */
-        for (;;) {
-                sig = dequeue_signal_lock(current, &current->blocked, &info);
-                if (!sig)
-                        break;
-                if (sig != SIGUSR1) {
-                        if (fsg->state < FSG_STATE_EXIT)
-                                DBG(fsg, "Main thread exiting on signal\n");
-                        raise_exception(fsg, FSG_STATE_EXIT);
-                }
-        }
-
-        /* Cancel all the pending transfers */
-        if (fsg->intreq_busy)
-                usb_ep_dequeue(fsg->intr_in, fsg->intreq);
-        for (i = 0; i < fsg_num_buffers; ++i) {
-                bh = &fsg->buffhds[i];
-                if (bh->inreq_busy)
-                        usb_ep_dequeue(fsg->bulk_in, bh->inreq);
-                if (bh->outreq_busy)
-                        usb_ep_dequeue(fsg->bulk_out, bh->outreq);
-        }
-
-        /* Wait until everything is idle */
-        for (;;) {
-                num_active = fsg->intreq_busy;
-                for (i = 0; i < fsg_num_buffers; ++i) {
-                        bh = &fsg->buffhds[i];
-                        num_active += bh->inreq_busy + bh->outreq_busy;
-                }
-                if (num_active == 0)
-                        break;
-                if (sleep_thread(fsg))
-                        return;
-        }
-
-        /* Clear out the controller's fifos */
-        if (fsg->bulk_in_enabled)
-                usb_ep_fifo_flush(fsg->bulk_in);
-        if (fsg->bulk_out_enabled)
-                usb_ep_fifo_flush(fsg->bulk_out);
-        if (fsg->intr_in_enabled)
-                usb_ep_fifo_flush(fsg->intr_in);
-
-        /* Reset the I/O buffer states and pointers, the SCSI
-         * state, and the exception.  Then invoke the handler. */
-        spin_lock_irq(&fsg->lock);
-
-        for (i = 0; i < fsg_num_buffers; ++i) {
-                bh = &fsg->buffhds[i];
-                bh->state = BUF_STATE_EMPTY;
-        }
-        fsg->next_buffhd_to_fill = fsg->next_buffhd_to_drain =
-                        &fsg->buffhds[0];
-
-        exception_req_tag = fsg->exception_req_tag;
-        new_config = fsg->new_config;
-        old_state = fsg->state;
-
-        if (old_state == FSG_STATE_ABORT_BULK_OUT)
-                fsg->state = FSG_STATE_STATUS_PHASE;
-        else {
-                for (i = 0; i < fsg->nluns; ++i) {
-                        curlun = &fsg->luns[i];
-                        curlun->prevent_medium_removal = 0;
-                        curlun->sense_data = curlun->unit_attention_data =
-                                        SS_NO_SENSE;
-                        curlun->sense_data_info = 0;
-                        curlun->info_valid = 0;
-                }
-                fsg->state = FSG_STATE_IDLE;
-        }
-        spin_unlock_irq(&fsg->lock);
-
-        /* Carry out any extra actions required for the exception */
-        switch (old_state) {
-        default:
-                break;
-
-        case FSG_STATE_ABORT_BULK_OUT:
-                send_status(fsg);
-                spin_lock_irq(&fsg->lock);
-                if (fsg->state == FSG_STATE_STATUS_PHASE)
-                        fsg->state = FSG_STATE_IDLE;
-                spin_unlock_irq(&fsg->lock);
-                break;
-
-        case FSG_STATE_RESET:
-                /* In case we were forced against our will to halt a
-                 * bulk endpoint, clear the halt now.  (The SuperH UDC
-                 * requires this.) */
-                if (test_and_clear_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags))
-                        usb_ep_clear_halt(fsg->bulk_in);
-
-                if (transport_is_bbb()) {
-                        if (fsg->ep0_req_tag == exception_req_tag)
-                                ep0_queue(fsg); // Complete the status stage
-
-                } else if (transport_is_cbi())
-                        send_status(fsg);       // Status by interrupt pipe
-
-                /* Technically this should go here, but it would only be
-                 * a waste of time.  Ditto for the INTERFACE_CHANGE and
-                 * CONFIG_CHANGE cases. */
-                // for (i = 0; i < fsg->nluns; ++i)
-                //      fsg->luns[i].unit_attention_data = SS_RESET_OCCURRED;
-                break;
-
-        case FSG_STATE_INTERFACE_CHANGE:
-                rc = do_set_interface(fsg, 0);
-                if (fsg->ep0_req_tag != exception_req_tag)
-                        break;
-                if (rc != 0)                    // STALL on errors
-                        fsg_set_halt(fsg, fsg->ep0);
-                else                            // Complete the status stage
-                        ep0_queue(fsg);
-                break;
-
-        case FSG_STATE_CONFIG_CHANGE:
-                rc = do_set_config(fsg, new_config);
-                if (fsg->ep0_req_tag != exception_req_tag)
-                        break;
-                if (rc != 0)                    // STALL on errors
-                        fsg_set_halt(fsg, fsg->ep0);
-                else                            // Complete the status stage
-                        ep0_queue(fsg);
-                break;
-
-        case FSG_STATE_DISCONNECT:
-                for (i = 0; i < fsg->nluns; ++i)
-                        fsg_lun_fsync_sub(fsg->luns + i);
-                do_set_config(fsg, 0);          // Unconfigured state
-                break;
-
-        case FSG_STATE_EXIT:
-        case FSG_STATE_TERMINATED:
-                do_set_config(fsg, 0);                  // Free resources
-                spin_lock_irq(&fsg->lock);
-                fsg->state = FSG_STATE_TERMINATED;      // Stop the thread
-                spin_unlock_irq(&fsg->lock);
-                break;
-        }
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-static int fsg_main_thread(void *fsg_)
-{
-        struct fsg_dev          *fsg = fsg_;
-
-        /* Allow the thread to be killed by a signal, but set the signal mask
-         * to block everything but INT, TERM, KILL, and USR1. */
-        allow_signal(SIGINT);
-        allow_signal(SIGTERM);
-        allow_signal(SIGKILL);
-        allow_signal(SIGUSR1);
-
-        /* Allow the thread to be frozen */
-        set_freezable();
-
-        /* Arrange for userspace references to be interpreted as kernel
-         * pointers.  That way we can pass a kernel pointer to a routine
-         * that expects a __user pointer and it will work okay. */
-        set_fs(get_ds());
-
-        /* The main loop */
-        while (fsg->state != FSG_STATE_TERMINATED) {
-                if (exception_in_progress(fsg) || signal_pending(current)) {
-                        handle_exception(fsg);
-                        continue;
-                }
-
-                if (!fsg->running) {
-                        sleep_thread(fsg);
-                        continue;
-                }
-
-                if (get_next_command(fsg))
-                        continue;
-
-                spin_lock_irq(&fsg->lock);
-                if (!exception_in_progress(fsg))
-                        fsg->state = FSG_STATE_DATA_PHASE;
-                spin_unlock_irq(&fsg->lock);
-
-                if (do_scsi_command(fsg) || finish_reply(fsg))
-                        continue;
-
-                spin_lock_irq(&fsg->lock);
-                if (!exception_in_progress(fsg))
-                        fsg->state = FSG_STATE_STATUS_PHASE;
-                spin_unlock_irq(&fsg->lock);
-
-                if (send_status(fsg))
-                        continue;
-
-                spin_lock_irq(&fsg->lock);
-                if (!exception_in_progress(fsg))
-                        fsg->state = FSG_STATE_IDLE;
-                spin_unlock_irq(&fsg->lock);
-                }
-
-        spin_lock_irq(&fsg->lock);
-        fsg->thread_task = NULL;
-        spin_unlock_irq(&fsg->lock);
-
-        /* If we are exiting because of a signal, unregister the
-         * gadget driver. */
-        if (test_and_clear_bit(REGISTERED, &fsg->atomic_bitflags))
-                usb_gadget_unregister_driver(&fsg_driver);
-
-        /* Let the unbind and cleanup routines know the thread has exited */
-        complete_and_exit(&fsg->thread_notifier, 0);
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-
-/* The write permissions and store_xxx pointers are set in fsg_bind() */
-static DEVICE_ATTR(ro, 0444, fsg_show_ro, NULL);
-static DEVICE_ATTR(nofua, 0644, fsg_show_nofua, NULL);
-static DEVICE_ATTR(file, 0444, fsg_show_file, NULL);
-
-
-/*-------------------------------------------------------------------------*/
-
-static void fsg_release(struct kref *ref)
-{
-        struct fsg_dev  *fsg = container_of(ref, struct fsg_dev, ref);
-
-        kfree(fsg->luns);
-        kfree(fsg);
-}
-
-static void lun_release(struct device *dev)
-{
-        struct rw_semaphore     *filesem = dev_get_drvdata(dev);
-        struct fsg_dev          *fsg =
-                container_of(filesem, struct fsg_dev, filesem);
-
-        kref_put(&fsg->ref, fsg_release);
-}
-
-static void /* __init_or_exit */ fsg_unbind(struct usb_gadget *gadget)
-{
-        struct fsg_dev          *fsg = get_gadget_data(gadget);
-        int                     i;
-        struct fsg_lun          *curlun;
-        struct usb_request      *req = fsg->ep0req;
-
-        DBG(fsg, "unbind\n");
-        clear_bit(REGISTERED, &fsg->atomic_bitflags);
-
-        /* If the thread isn't already dead, tell it to exit now */
-        if (fsg->state != FSG_STATE_TERMINATED) {
-                raise_exception(fsg, FSG_STATE_EXIT);
-                wait_for_completion(&fsg->thread_notifier);
-
-                /* The cleanup routine waits for this completion also */
-                complete(&fsg->thread_notifier);
-        }
-
-        /* Unregister the sysfs attribute files and the LUNs */
-        for (i = 0; i < fsg->nluns; ++i) {
-                curlun = &fsg->luns[i];
-                if (curlun->registered) {
-                        device_remove_file(&curlun->dev, &dev_attr_nofua);
-                        device_remove_file(&curlun->dev, &dev_attr_ro);
-                        device_remove_file(&curlun->dev, &dev_attr_file);
-                        fsg_lun_close(curlun);
-                        device_unregister(&curlun->dev);
-                        curlun->registered = 0;
-                }
-        }
-
-        /* Free the data buffers */
-        for (i = 0; i < fsg_num_buffers; ++i)
-                kfree(fsg->buffhds[i].buf);
-
-        /* Free the request and buffer for endpoint 0 */
-        if (req) {
-                kfree(req->buf);
-                usb_ep_free_request(fsg->ep0, req);
-        }
-
-        set_gadget_data(gadget, NULL);
-}
-
-
-static int __init check_parameters(struct fsg_dev *fsg)
-{
-        int     prot;
-
-        /* Store the default values */
-        mod_data.transport_type = USB_PR_BULK;
-        mod_data.transport_name = "Bulk-only";
-        mod_data.protocol_type = USB_SC_SCSI;
-        mod_data.protocol_name = "Transparent SCSI";
-
-        /* Some peripheral controllers are known not to be able to
-         * halt bulk endpoints correctly.  If one of them is present,
-         * disable stalls.
-         */
-        if (gadget_is_at91(fsg->gadget))
-                mod_data.can_stall = 0;
-
-        if (mod_data.release == 0xffff)
-                mod_data.release = get_default_bcdDevice();
-
-        prot = simple_strtol(mod_data.protocol_parm, NULL, 0);
-
-#ifdef CONFIG_USB_FILE_STORAGE_TEST
-        if (strnicmp(mod_data.transport_parm, "BBB", 10) == 0) {
-                ;               // Use default setting
-        } else if (strnicmp(mod_data.transport_parm, "CB", 10) == 0) {
-                mod_data.transport_type = USB_PR_CB;
-                mod_data.transport_name = "Control-Bulk";
-        } else if (strnicmp(mod_data.transport_parm, "CBI", 10) == 0) {
-                mod_data.transport_type = USB_PR_CBI;
-                mod_data.transport_name = "Control-Bulk-Interrupt";
-        } else {
-                ERROR(fsg, "invalid transport: %s\n", mod_data.transport_parm);
-                return -EINVAL;
-        }
-
-        if (strnicmp(mod_data.protocol_parm, "SCSI", 10) == 0 ||
-                        prot == USB_SC_SCSI) {
-                ;               // Use default setting
-        } else if (strnicmp(mod_data.protocol_parm, "RBC", 10) == 0 ||
-                        prot == USB_SC_RBC) {
-                mod_data.protocol_type = USB_SC_RBC;
-                mod_data.protocol_name = "RBC";
-        } else if (strnicmp(mod_data.protocol_parm, "8020", 4) == 0 ||
-                        strnicmp(mod_data.protocol_parm, "ATAPI", 10) == 0 ||
-                        prot == USB_SC_8020) {
-                mod_data.protocol_type = USB_SC_8020;
-                mod_data.protocol_name = "8020i (ATAPI)";
-        } else if (strnicmp(mod_data.protocol_parm, "QIC", 3) == 0 ||
-                        prot == USB_SC_QIC) {
-                mod_data.protocol_type = USB_SC_QIC;
-                mod_data.protocol_name = "QIC-157";
-        } else if (strnicmp(mod_data.protocol_parm, "UFI", 10) == 0 ||
-                        prot == USB_SC_UFI) {
-                mod_data.protocol_type = USB_SC_UFI;
-                mod_data.protocol_name = "UFI";
-        } else if (strnicmp(mod_data.protocol_parm, "8070", 4) == 0 ||
-                        prot == USB_SC_8070) {
-                mod_data.protocol_type = USB_SC_8070;
-                mod_data.protocol_name = "8070i";
-        } else {
-                ERROR(fsg, "invalid protocol: %s\n", mod_data.protocol_parm);
-                return -EINVAL;
-        }
-
-        mod_data.buflen &= PAGE_CACHE_MASK;
-        if (mod_data.buflen <= 0) {
-                ERROR(fsg, "invalid buflen\n");
-                return -ETOOSMALL;
-        }
-
-#endif /* CONFIG_USB_FILE_STORAGE_TEST */
-
-        /* Serial string handling.
-         * On a real device, the serial string would be loaded
-         * from permanent storage. */
-        if (mod_data.serial) {
-                const char *ch;
-                unsigned len = 0;
-
-                /* Sanity check :
-                 * The CB[I] specification limits the serial string to
-                 * 12 uppercase hexadecimal characters.
-                 * BBB need at least 12 uppercase hexadecimal characters,
-                 * with a maximum of 126. */
-                for (ch = mod_data.serial; *ch; ++ch) {
-                        ++len;
-                        if ((*ch < '0' || *ch > '9') &&
-                            (*ch < 'A' || *ch > 'F')) { /* not uppercase hex */
-                                WARNING(fsg,
-                                        "Invalid serial string character: %c\n",
-                                        *ch);
-                                goto no_serial;
-                        }
-                }
-                if (len > 126 ||
-                    (mod_data.transport_type == USB_PR_BULK && len < 12) ||
-                    (mod_data.transport_type != USB_PR_BULK && len > 12)) {
-                        WARNING(fsg, "Invalid serial string length!\n");
-                        goto no_serial;
-                }
-                fsg_strings[FSG_STRING_SERIAL - 1].s = mod_data.serial;
-        } else {
-                WARNING(fsg, "No serial-number string provided!\n");
- no_serial:
-                device_desc.iSerialNumber = 0;
-        }
-
-        return 0;
-}
-
-
-static int __init fsg_bind(struct usb_gadget *gadget,
-                struct usb_gadget_driver *driver)
-{
-        struct fsg_dev          *fsg = the_fsg;
-        int                     rc;
-        int                     i;
-        struct fsg_lun          *curlun;
-        struct usb_ep           *ep;
-        struct usb_request      *req;
-        char                    *pathbuf, *p;
-
-        fsg->gadget = gadget;
-        set_gadget_data(gadget, fsg);
-        fsg->ep0 = gadget->ep0;
-        fsg->ep0->driver_data = fsg;
-
-        if ((rc = check_parameters(fsg)) != 0)
-                goto out;
-
-        if (mod_data.removable) {       // Enable the store_xxx attributes
-                dev_attr_file.attr.mode = 0644;
-                dev_attr_file.store = fsg_store_file;
-                if (!mod_data.cdrom) {
-                        dev_attr_ro.attr.mode = 0644;
-                        dev_attr_ro.store = fsg_store_ro;
-                }
-        }
-
-        /* Only for removable media? */
-        dev_attr_nofua.attr.mode = 0644;
-        dev_attr_nofua.store = fsg_store_nofua;
-
-        /* Find out how many LUNs there should be */
-        i = mod_data.nluns;
-        if (i == 0)
-                i = max(mod_data.num_filenames, 1u);
-        if (i > FSG_MAX_LUNS) {
-                ERROR(fsg, "invalid number of LUNs: %d\n", i);
-                rc = -EINVAL;
-                goto out;
-        }
-
-        /* Create the LUNs, open their backing files, and register the
-         * LUN devices in sysfs. */
-        fsg->luns = kzalloc(i * sizeof(struct fsg_lun), GFP_KERNEL);
-        if (!fsg->luns) {
-                rc = -ENOMEM;
-                goto out;
-        }
-        fsg->nluns = i;
-
-        for (i = 0; i < fsg->nluns; ++i) {
-                curlun = &fsg->luns[i];
-                curlun->cdrom = !!mod_data.cdrom;
-                curlun->ro = mod_data.cdrom || mod_data.ro[i];
-                curlun->initially_ro = curlun->ro;
-                curlun->removable = mod_data.removable;
-                curlun->nofua = mod_data.nofua[i];
-                curlun->dev.release = lun_release;
-                curlun->dev.parent = &gadget->dev;
-                curlun->dev.driver = &fsg_driver.driver;
-                dev_set_drvdata(&curlun->dev, &fsg->filesem);
-                dev_set_name(&curlun->dev,"%s-lun%d",
-                             dev_name(&gadget->dev), i);
-
-                kref_get(&fsg->ref);
-                rc = device_register(&curlun->dev);
-                if (rc) {
-                        INFO(fsg, "failed to register LUN%d: %d\n", i, rc);
-                        put_device(&curlun->dev);
-                        goto out;
-                }
-                curlun->registered = 1;
-
-                rc = device_create_file(&curlun->dev, &dev_attr_ro);
-                if (rc)
-                        goto out;
-                rc = device_create_file(&curlun->dev, &dev_attr_nofua);
-                if (rc)
-                        goto out;
-                rc = device_create_file(&curlun->dev, &dev_attr_file);
-                if (rc)
-                        goto out;
-
-                if (mod_data.file[i] && *mod_data.file[i]) {
-                        rc = fsg_lun_open(curlun, mod_data.file[i]);
-                        if (rc)
-                                goto out;
-                } else if (!mod_data.removable) {
-                        ERROR(fsg, "no file given for LUN%d\n", i);
-                        rc = -EINVAL;
-                        goto out;
-                }
-        }
-
-        /* Find all the endpoints we will use */
-        usb_ep_autoconfig_reset(gadget);
-        ep = usb_ep_autoconfig(gadget, &fsg_fs_bulk_in_desc);
-        if (!ep)
-                goto autoconf_fail;
-        ep->driver_data = fsg;          // claim the endpoint
-        fsg->bulk_in = ep;
-
-        ep = usb_ep_autoconfig(gadget, &fsg_fs_bulk_out_desc);
-        if (!ep)
-                goto autoconf_fail;
-        ep->driver_data = fsg;          // claim the endpoint
-        fsg->bulk_out = ep;
-
-        if (transport_is_cbi()) {
-                ep = usb_ep_autoconfig(gadget, &fsg_fs_intr_in_desc);
-                if (!ep)
-                        goto autoconf_fail;
-                ep->driver_data = fsg;          // claim the endpoint
-                fsg->intr_in = ep;
-        }
-
-        /* Fix up the descriptors */
-        device_desc.idVendor = cpu_to_le16(mod_data.vendor);
-        device_desc.idProduct = cpu_to_le16(mod_data.product);
-        device_desc.bcdDevice = cpu_to_le16(mod_data.release);
-
-        i = (transport_is_cbi() ? 3 : 2);       // Number of endpoints
-        fsg_intf_desc.bNumEndpoints = i;
-        fsg_intf_desc.bInterfaceSubClass = mod_data.protocol_type;
-        fsg_intf_desc.bInterfaceProtocol = mod_data.transport_type;
-        fsg_fs_function[i + FSG_FS_FUNCTION_PRE_EP_ENTRIES] = NULL;
-
-        if (gadget_is_dualspeed(gadget)) {
-                fsg_hs_function[i + FSG_HS_FUNCTION_PRE_EP_ENTRIES] = NULL;
-
-                /* Assume endpoint addresses are the same for both speeds */
-                fsg_hs_bulk_in_desc.bEndpointAddress =
-                        fsg_fs_bulk_in_desc.bEndpointAddress;
-                fsg_hs_bulk_out_desc.bEndpointAddress =
-                        fsg_fs_bulk_out_desc.bEndpointAddress;
-                fsg_hs_intr_in_desc.bEndpointAddress =
-                        fsg_fs_intr_in_desc.bEndpointAddress;
-        }
-
-        if (gadget_is_superspeed(gadget)) {
-                unsigned                max_burst;
-
-                fsg_ss_function[i + FSG_SS_FUNCTION_PRE_EP_ENTRIES] = NULL;
-
-                /* Calculate bMaxBurst, we know packet size is 1024 */
-                max_burst = min_t(unsigned, mod_data.buflen / 1024, 15);
-
-                /* Assume endpoint addresses are the same for both speeds */
-                fsg_ss_bulk_in_desc.bEndpointAddress =
-                        fsg_fs_bulk_in_desc.bEndpointAddress;
-                fsg_ss_bulk_in_comp_desc.bMaxBurst = max_burst;
-
-                fsg_ss_bulk_out_desc.bEndpointAddress =
-                        fsg_fs_bulk_out_desc.bEndpointAddress;
-                fsg_ss_bulk_out_comp_desc.bMaxBurst = max_burst;
-        }
-
-        if (gadget_is_otg(gadget))
-                fsg_otg_desc.bmAttributes |= USB_OTG_HNP;
-
-        rc = -ENOMEM;
-
-        /* Allocate the request and buffer for endpoint 0 */
-        fsg->ep0req = req = usb_ep_alloc_request(fsg->ep0, GFP_KERNEL);
-        if (!req)
-                goto out;
-        req->buf = kmalloc(EP0_BUFSIZE, GFP_KERNEL);
-        if (!req->buf)
-                goto out;
-        req->complete = ep0_complete;
-
-        /* Allocate the data buffers */
-        for (i = 0; i < fsg_num_buffers; ++i) {
-                struct fsg_buffhd       *bh = &fsg->buffhds[i];
-
-                /* Allocate for the bulk-in endpoint.  We assume that
-                 * the buffer will also work with the bulk-out (and
-                 * interrupt-in) endpoint. */
-                bh->buf = kmalloc(mod_data.buflen, GFP_KERNEL);
-                if (!bh->buf)
-                        goto out;
-                bh->next = bh + 1;
-        }
-        fsg->buffhds[fsg_num_buffers - 1].next = &fsg->buffhds[0];
-
-        /* This should reflect the actual gadget power source */
-        usb_gadget_set_selfpowered(gadget);
-
-        snprintf(fsg_string_manufacturer, sizeof fsg_string_manufacturer,
-                        "%s %s with %s",
-                        init_utsname()->sysname, init_utsname()->release,
-                        gadget->name);
-
-        fsg->thread_task = kthread_create(fsg_main_thread, fsg,
-                        "file-storage-gadget");
-        if (IS_ERR(fsg->thread_task)) {
-                rc = PTR_ERR(fsg->thread_task);
-                goto out;
-        }
-
-        INFO(fsg, DRIVER_DESC ", version: " DRIVER_VERSION "\n");
-        INFO(fsg, "NOTE: This driver is deprecated.  "
-                        "Consider using g_mass_storage instead.\n");
-        INFO(fsg, "Number of LUNs=%d\n", fsg->nluns);
-
-        pathbuf = kmalloc(PATH_MAX, GFP_KERNEL);
-        for (i = 0; i < fsg->nluns; ++i) {
-                curlun = &fsg->luns[i];
-                if (fsg_lun_is_open(curlun)) {
-                        p = NULL;
-                        if (pathbuf) {
-                                p = d_path(&curlun->filp->f_path,
-                                           pathbuf, PATH_MAX);
-                                if (IS_ERR(p))
-                                        p = NULL;
-                        }
-                        LINFO(curlun, "ro=%d, nofua=%d, file: %s\n",
-                              curlun->ro, curlun->nofua, (p ? p : "(error)"));
-                }
-        }
-        kfree(pathbuf);
-
-        DBG(fsg, "transport=%s (x%02x)\n",
-                        mod_data.transport_name, mod_data.transport_type);
-        DBG(fsg, "protocol=%s (x%02x)\n",
-                        mod_data.protocol_name, mod_data.protocol_type);
-        DBG(fsg, "VendorID=x%04x, ProductID=x%04x, Release=x%04x\n",
-                        mod_data.vendor, mod_data.product, mod_data.release);
-        DBG(fsg, "removable=%d, stall=%d, cdrom=%d, buflen=%u\n",
-                        mod_data.removable, mod_data.can_stall,
-                        mod_data.cdrom, mod_data.buflen);
-        DBG(fsg, "I/O thread pid: %d\n", task_pid_nr(fsg->thread_task));
-
-        set_bit(REGISTERED, &fsg->atomic_bitflags);
-
-        /* Tell the thread to start working */
-        wake_up_process(fsg->thread_task);
-        return 0;
-
-autoconf_fail:
-        ERROR(fsg, "unable to autoconfigure all endpoints\n");
-        rc = -ENOTSUPP;
-
-out:
-        fsg->state = FSG_STATE_TERMINATED;      // The thread is dead
-        fsg_unbind(gadget);
-        complete(&fsg->thread_notifier);
-        return rc;
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-static void fsg_suspend(struct usb_gadget *gadget)
-{
-        struct fsg_dev          *fsg = get_gadget_data(gadget);
-
-        DBG(fsg, "suspend\n");
-        set_bit(SUSPENDED, &fsg->atomic_bitflags);
-}
-
-static void fsg_resume(struct usb_gadget *gadget)
-{
-        struct fsg_dev          *fsg = get_gadget_data(gadget);
-
-        DBG(fsg, "resume\n");
-        clear_bit(SUSPENDED, &fsg->atomic_bitflags);
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-static __refdata struct usb_gadget_driver               fsg_driver = {
-        .max_speed      = USB_SPEED_SUPER,
-        .function       = (char *) fsg_string_product,
-        .bind           = fsg_bind,
-        .unbind         = fsg_unbind,
-        .disconnect     = fsg_disconnect,
-        .setup          = fsg_setup,
-        .suspend        = fsg_suspend,
-        .resume         = fsg_resume,
-
-        .driver         = {
-                .name           = DRIVER_NAME,
-                .owner          = THIS_MODULE,
-                // .release = ...
-                // .suspend = ...
-                // .resume = ...
-        },
-};
-
-
-static int __init fsg_alloc(void)
-{
-        struct fsg_dev          *fsg;
-
-        fsg = kzalloc(sizeof *fsg +
-                      fsg_num_buffers * sizeof *(fsg->buffhds), GFP_KERNEL);
-
-        if (!fsg)
-                return -ENOMEM;
-        spin_lock_init(&fsg->lock);
-        init_rwsem(&fsg->filesem);
-        kref_init(&fsg->ref);
-        init_completion(&fsg->thread_notifier);
-
-        the_fsg = fsg;
-        return 0;
-}
-
-
-static int __init fsg_init(void)
-{
-        int             rc;
-        struct fsg_dev  *fsg;
-
-        rc = fsg_num_buffers_validate();
-        if (rc != 0)
-                return rc;
-
-        if ((rc = fsg_alloc()) != 0)
-                return rc;
-        fsg = the_fsg;
-        rc = usb_gadget_probe_driver(&fsg_driver);
-        if (rc != 0)
-                kref_put(&fsg->ref, fsg_release);
-        return rc;
-}
-module_init(fsg_init);
-
-
-static void __exit fsg_cleanup(void)
-{
-        struct fsg_dev  *fsg = the_fsg;
-
-        /* Unregister the driver iff the thread hasn't already done so */
-        if (test_and_clear_bit(REGISTERED, &fsg->atomic_bitflags))
-                usb_gadget_unregister_driver(&fsg_driver);
-
-        /* Wait for the thread to finish up */
-        wait_for_completion(&fsg->thread_notifier);
-
-        kref_put(&fsg->ref, fsg_release);
-}
-module_exit(fsg_cleanup);
diff --git a/drivers/usb/gadget/fsl_qe_udc.c b/drivers/usb/gadget/fsl_qe_udc.c
index b09452d6f33a..ec50f18c8890 100644
--- a/drivers/usb/gadget/fsl_qe_udc.c
+++ b/drivers/usb/gadget/fsl_qe_udc.c
@@ -2347,7 +2347,7 @@ static int fsl_qe_stop(struct usb_gadget *gadget,
 }
 
 /* udc structure's alloc and setup, include ep-param alloc */
-static struct qe_udc __devinit *qe_udc_config(struct platform_device *ofdev)
+static struct qe_udc *qe_udc_config(struct platform_device *ofdev)
 {
         struct qe_udc *udc;
         struct device_node *np = ofdev->dev.of_node;
@@ -2402,7 +2402,7 @@ cleanup:
 }
 
 /* USB Controller register init */
-static int __devinit qe_udc_reg_init(struct qe_udc *udc)
+static int qe_udc_reg_init(struct qe_udc *udc)
 {
         struct usb_ctlr __iomem *qe_usbregs;
         qe_usbregs = udc->usb_regs;
@@ -2420,7 +2420,7 @@ static int __devinit qe_udc_reg_init(struct qe_udc *udc)
         return 0;
 }
 
-static int __devinit qe_ep_config(struct qe_udc *udc, unsigned char pipe_num)
+static int qe_ep_config(struct qe_udc *udc, unsigned char pipe_num)
 {
         struct qe_ep *ep = &udc->eps[pipe_num];
 
@@ -2473,7 +2473,7 @@ static void qe_udc_release(struct device *dev)
 
 /* Driver probe functions */
 static const struct of_device_id qe_udc_match[];
-static int __devinit qe_udc_probe(struct platform_device *ofdev)
+static int qe_udc_probe(struct platform_device *ofdev)
 {
         struct qe_udc *udc;
         const struct of_device_id *match;
@@ -2651,7 +2651,7 @@ static int qe_udc_resume(struct platform_device *dev)
 }
 #endif
 
-static int __devexit qe_udc_remove(struct platform_device *ofdev)
+static int qe_udc_remove(struct platform_device *ofdev)
 {
         struct qe_udc *udc = dev_get_drvdata(&ofdev->dev);
         struct qe_ep *ep;
@@ -2710,7 +2710,7 @@ static int __devexit qe_udc_remove(struct platform_device *ofdev)
 }
 
 /*-------------------------------------------------------------------------*/
-static const struct of_device_id qe_udc_match[] __devinitconst = {
+static const struct of_device_id qe_udc_match[] = {
         {
                 .compatible = "fsl,mpc8323-qe-usb",
                 .data = (void *)PORT_QE,
@@ -2735,7 +2735,7 @@ static struct platform_driver udc_driver = {
                 .of_match_table = qe_udc_match,
         },
         .probe          = qe_udc_probe,
-        .remove         = __devexit_p(qe_udc_remove),
+        .remove         = qe_udc_remove,
 #ifdef CONFIG_PM
         .suspend        = qe_udc_suspend,
         .resume         = qe_udc_resume,
diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c
index 6ae70cba0c4a..c19f7f13790b 100644
--- a/drivers/usb/gadget/fsl_udc_core.c
+++ b/drivers/usb/gadget/fsl_udc_core.c
@@ -2126,7 +2126,7 @@ static int fsl_proc_read(char *page, char **start, off_t off, int count,
 
         tmp_reg = fsl_readl(&dr_regs->usbintr);
         t = scnprintf(next, size,
-                        "USB Intrrupt Enable Reg:\n"
+                        "USB Interrupt Enable Reg:\n"
                         "Sleep Enable: %d SOF Received Enable: %d "
                         "Reset Enable: %d\n"
                         "System Error Enable: %d "
diff --git a/drivers/usb/gadget/hid.c b/drivers/usb/gadget/hid.c
index 74130f6c12c0..c36260ea8bf2 100644
--- a/drivers/usb/gadget/hid.c
+++ b/drivers/usb/gadget/hid.c
@@ -203,7 +203,7 @@ static int __init hidg_plat_driver_probe(struct platform_device *pdev)
         return 0;
 }
 
-static int __devexit hidg_plat_driver_remove(struct platform_device *pdev)
+static int hidg_plat_driver_remove(struct platform_device *pdev)
 {
         struct hidg_func_node *e, *n;
 
@@ -229,7 +229,7 @@ static __refdata struct usb_composite_driver hidg_driver = {
 };
 
 static struct platform_driver hidg_plat_driver = {
-        .remove         = __devexit_p(hidg_plat_driver_remove),
+        .remove         = hidg_plat_driver_remove,
         .driver         = {
                 .owner  = THIS_MODULE,
                 .name   = "hidg",
diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c
index 76494cabf4e4..8ac840f25ba9 100644
--- a/drivers/usb/gadget/inode.c
+++ b/drivers/usb/gadget/inode.c
@@ -76,7 +76,6 @@ MODULE_LICENSE ("GPL");
 /*----------------------------------------------------------------------*/
 
 #define GADGETFS_MAGIC          0xaee71ee7
-#define DMA_ADDR_INVALID        (~(dma_addr_t)0)
 
 /* /dev/gadget/$CHIP represents ep0 and the whole device */
 enum ep0_state {
@@ -918,7 +917,6 @@ static void clean_req (struct usb_ep *ep, struct usb_request *req)
         if (req->buf != dev->rbuf) {
                 kfree(req->buf);
                 req->buf = dev->rbuf;
-                req->dma = DMA_ADDR_INVALID;
         }
         req->complete = epio_complete;
         dev->setup_out_ready = 0;
@@ -1408,7 +1406,6 @@ gadgetfs_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
                 dev->setup_abort = 1;
 
         req->buf = dev->rbuf;
-        req->dma = DMA_ADDR_INVALID;
         req->context = NULL;
         value = -EOPNOTSUPP;
         switch (ctrl->bRequest) {
diff --git a/drivers/usb/gadget/lpc32xx_udc.c b/drivers/usb/gadget/lpc32xx_udc.c
index 21a9861dabf0..dd1c9b1fe528 100644
--- a/drivers/usb/gadget/lpc32xx_udc.c
+++ b/drivers/usb/gadget/lpc32xx_udc.c
@@ -2399,7 +2399,7 @@ static void udc_handle_ep0_setup(struct lpc32xx_udc *udc)
 
                 if (i < 0) {
                         /* setup processing failed, force stall */
-                        dev_err(udc->dev,
+                        dev_dbg(udc->dev,
                                 "req %02x.%02x protocol STALL; stat %d\n",
                                 reqtype, req, i);
                         udc->ep0state = WAIT_FOR_SETUP;
@@ -3352,7 +3352,7 @@ phy_fail:
         return retval;
 }
 
-static int __devexit lpc32xx_udc_remove(struct platform_device *pdev)
+static int lpc32xx_udc_remove(struct platform_device *pdev)
 {
         struct lpc32xx_udc *udc = platform_get_drvdata(pdev);
 
@@ -3447,7 +3447,7 @@ MODULE_DEVICE_TABLE(of, lpc32xx_udc_of_match);
 #endif
 
 static struct platform_driver lpc32xx_udc_driver = {
-        .remove         = __devexit_p(lpc32xx_udc_remove),
+        .remove         = lpc32xx_udc_remove,
         .shutdown       = lpc32xx_udc_shutdown,
         .suspend        = lpc32xx_udc_suspend,
         .resume         = lpc32xx_udc_resume,
diff --git a/drivers/usb/gadget/mv_u3d_core.c b/drivers/usb/gadget/mv_u3d_core.c
index 8cfd5b028dbd..b5cea273c957 100644
--- a/drivers/usb/gadget/mv_u3d_core.c
+++ b/drivers/usb/gadget/mv_u3d_core.c
@@ -1763,7 +1763,7 @@ static void mv_u3d_gadget_release(struct device *dev)
         dev_dbg(dev, "%s\n", __func__);
 }
 
-static __devexit int mv_u3d_remove(struct platform_device *dev)
+static int mv_u3d_remove(struct platform_device *dev)
 {
         struct mv_u3d *u3d = platform_get_drvdata(dev);
 
diff --git a/drivers/usb/gadget/mv_udc_core.c b/drivers/usb/gadget/mv_udc_core.c
index ea45224f78c8..6e8b1272ebce 100644
--- a/drivers/usb/gadget/mv_udc_core.c
+++ b/drivers/usb/gadget/mv_udc_core.c
@@ -1012,7 +1012,7 @@ static void udc_clock_enable(struct mv_udc *udc)
         unsigned int i;
 
         for (i = 0; i < udc->clknum; i++)
-                clk_enable(udc->clk[i]);
+                clk_prepare_enable(udc->clk[i]);
 }
 
 static void udc_clock_disable(struct mv_udc *udc)
@@ -1020,7 +1020,7 @@ static void udc_clock_disable(struct mv_udc *udc)
         unsigned int i;
 
         for (i = 0; i < udc->clknum; i++)
-                clk_disable(udc->clk[i]);
+                clk_disable_unprepare(udc->clk[i]);
 }
 
 static void udc_stop(struct mv_udc *udc)
@@ -2128,7 +2128,7 @@ static void gadget_release(struct device *_dev)
         complete(udc->done);
 }
 
-static int __devexit mv_udc_remove(struct platform_device *dev)
+static int mv_udc_remove(struct platform_device *dev)
 {
         struct mv_udc *udc = the_controller;
         int clk_i;
@@ -2188,7 +2188,7 @@ static int __devexit mv_udc_remove(struct platform_device *dev)
         return 0;
 }
 
-static int __devinit mv_udc_probe(struct platform_device *dev)
+static int mv_udc_probe(struct platform_device *dev)
 {
         struct mv_usb_platform_data *pdata = dev->dev.platform_data;
         struct mv_udc *udc;
diff --git a/drivers/usb/gadget/net2272.c b/drivers/usb/gadget/net2272.c
index c009263a47e3..d226058e3b88 100644
--- a/drivers/usb/gadget/net2272.c
+++ b/drivers/usb/gadget/net2272.c
@@ -2193,7 +2193,7 @@ net2272_gadget_release(struct device *_dev)
 
 /*---------------------------------------------------------------------------*/
 
-static void __devexit
+static void
 net2272_remove(struct net2272 *dev)
 {
         usb_del_gadget_udc(&dev->gadget);
@@ -2215,8 +2215,7 @@ net2272_remove(struct net2272 *dev)
         dev_info(dev->dev, "unbind\n");
 }
 
-static struct net2272 * __devinit
-net2272_probe_init(struct device *dev, unsigned int irq)
+static struct net2272 *net2272_probe_init(struct device *dev, unsigned int irq)
 {
         struct net2272 *ret;
 
@@ -2246,7 +2245,7 @@ net2272_probe_init(struct device *dev, unsigned int irq)
         return ret;
 }
 
-static int __devinit
+static int
 net2272_probe_fin(struct net2272 *dev, unsigned int irqflags)
 {
         int ret;
@@ -2306,7 +2305,7 @@ err_add_udc:
  * don't respond over USB until a gadget driver binds to us
  */
 
-static int __devinit
+static int
 net2272_rdk1_probe(struct pci_dev *pdev, struct net2272 *dev)
 {
         unsigned long resource, len, tmp;
@@ -2389,7 +2388,7 @@ net2272_rdk1_probe(struct pci_dev *pdev, struct net2272 *dev)
         return ret;
 }
 
-static int __devinit
+static int
 net2272_rdk2_probe(struct pci_dev *pdev, struct net2272 *dev)
 {
         unsigned long resource, len;
@@ -2447,7 +2446,7 @@ net2272_rdk2_probe(struct pci_dev *pdev, struct net2272 *dev)
         return ret;
 }
 
-static int __devinit
+static int
 net2272_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 {
         struct net2272 *dev;
@@ -2489,7 +2488,7 @@ net2272_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
         return ret;
 }
 
-static void __devexit
+static void
 net2272_rdk1_remove(struct pci_dev *pdev, struct net2272 *dev)
 {
         int i;
@@ -2511,7 +2510,7 @@ net2272_rdk1_remove(struct pci_dev *pdev, struct net2272 *dev)
         }
 }
 
-static void __devexit
+static void
 net2272_rdk2_remove(struct pci_dev *pdev, struct net2272 *dev)
 {
         int i;
@@ -2530,7 +2529,7 @@ net2272_rdk2_remove(struct pci_dev *pdev, struct net2272 *dev)
                         pci_resource_len(pdev, i));
 }
 
-static void __devexit
+static void
 net2272_pci_remove(struct pci_dev *pdev)
 {
         struct net2272 *dev = pci_get_drvdata(pdev);
@@ -2549,7 +2548,7 @@ net2272_pci_remove(struct pci_dev *pdev)
 }
 
 /* Table of matching PCI IDs */
-static struct pci_device_id __devinitdata pci_ids[] = {
+static struct pci_device_id pci_ids[] = {
         {       /* RDK 1 card */
                 .class       = ((PCI_CLASS_BRIDGE_OTHER << 8) | 0xfe),
                 .class_mask  = 0,
@@ -2575,7 +2574,7 @@ static struct pci_driver net2272_pci_driver = {
         .id_table = pci_ids,
 
         .probe    = net2272_pci_probe,
-        .remove   = __devexit_p(net2272_pci_remove),
+        .remove   = net2272_pci_remove,
 };
 
 static int net2272_pci_register(void)
@@ -2595,7 +2594,7 @@ static inline void net2272_pci_unregister(void) { }
 
 /*---------------------------------------------------------------------------*/
 
-static int __devinit
+static int
 net2272_plat_probe(struct platform_device *pdev)
 {
         struct net2272 *dev;
@@ -2661,7 +2660,7 @@ net2272_plat_probe(struct platform_device *pdev)
         return ret;
 }
 
-static int __devexit
+static int
 net2272_plat_remove(struct platform_device *pdev)
 {
         struct net2272 *dev = platform_get_drvdata(pdev);
@@ -2678,7 +2677,7 @@ net2272_plat_remove(struct platform_device *pdev)
 
 static struct platform_driver net2272_plat_driver = {
         .probe   = net2272_plat_probe,
-        .remove  = __devexit_p(net2272_plat_remove),
+        .remove  = net2272_plat_remove,
         .driver  = {
                 .name  = driver_name,
                 .owner = THIS_MODULE,
diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c
index ac335af154ba..708c0b55dcc8 100644
--- a/drivers/usb/gadget/net2280.c
+++ b/drivers/usb/gadget/net2280.c
@@ -9,7 +9,7 @@
  * CODE STATUS HIGHLIGHTS
  *
  * This driver should work well with most "gadget" drivers, including
- * the File Storage, Serial, and Ethernet/RNDIS gadget drivers
+ * the Mass Storage, Serial, and Ethernet/RNDIS gadget drivers
  * as well as Gadget Zero and Gadgetfs.
  *
  * DMA is enabled by default.  Drivers using transfer queues might use
diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c
index 2a4749c3eb3f..8bfe990caf1a 100644
--- a/drivers/usb/gadget/omap_udc.c
+++ b/drivers/usb/gadget/omap_udc.c
@@ -44,7 +44,7 @@
 #include <asm/unaligned.h>
 #include <asm/mach-types.h>
 
-#include <plat/dma.h>
+#include <linux/omap-dma.h>
 
 #include <mach/usb.h>
 
@@ -61,6 +61,8 @@
 #define DRIVER_DESC     "OMAP UDC driver"
 #define DRIVER_VERSION  "4 October 2004"
 
+#define OMAP_DMA_USB_W2FC_TX0           29
+
 /*
  * The OMAP UDC needs _very_ early endpoint setup:  before enabling the
  * D+ pullup to allow enumeration.  That's too early for the gadget
@@ -2506,7 +2508,7 @@ static inline void remove_proc_file(void) {}
  * UDC_SYSCON_1.CFG_LOCK is set can now work.  We won't use that
  * capability yet though.
  */
-static unsigned __devinit
+static unsigned
 omap_ep_setup(char *name, u8 addr, u8 type,
                 unsigned buf, unsigned maxp, int dbuf)
 {
@@ -2624,7 +2626,7 @@ static void omap_udc_release(struct device *dev)
         udc = NULL;
 }
 
-static int __devinit
+static int
 omap_udc_setup(struct platform_device *odev, struct usb_phy *xceiv)
 {
         unsigned        tmp, buf;
@@ -2761,7 +2763,7 @@ omap_udc_setup(struct platform_device *odev, struct usb_phy *xceiv)
         return 0;
 }
 
-static int __devinit omap_udc_probe(struct platform_device *pdev)
+static int omap_udc_probe(struct platform_device *pdev)
 {
         int                     status = -ENODEV;
         int                     hmc;
@@ -2974,7 +2976,7 @@ cleanup0:
         return status;
 }
 
-static int __devexit omap_udc_remove(struct platform_device *pdev)
+static int omap_udc_remove(struct platform_device *pdev)
 {
         DECLARE_COMPLETION_ONSTACK(done);
 
@@ -3060,7 +3062,7 @@ static int omap_udc_resume(struct platform_device *dev)
 
 static struct platform_driver udc_driver = {
         .probe          = omap_udc_probe,
-        .remove         = __devexit_p(omap_udc_remove),
+        .remove         = omap_udc_remove,
         .suspend        = omap_udc_suspend,
         .resume         = omap_udc_resume,
         .driver         = {
diff --git a/drivers/usb/gadget/printer.c b/drivers/usb/gadget/printer.c
index e156e3f26727..35bcc83d1e04 100644
--- a/drivers/usb/gadget/printer.c
+++ b/drivers/usb/gadget/printer.c
@@ -983,8 +983,10 @@ static int __init printer_func_bind(struct usb_configuration *c,
 {
         struct printer_dev *dev = container_of(f, struct printer_dev, function);
         struct usb_composite_dev *cdev = c->cdev;
-        struct usb_ep           *in_ep, *out_ep;
+        struct usb_ep *in_ep;
+        struct usb_ep *out_ep = NULL;
         int id;
+        int ret;
 
         id = usb_interface_id(c, f);
         if (id < 0)
@@ -1010,6 +1012,11 @@ autoconf_fail:
         hs_ep_in_desc.bEndpointAddress = fs_ep_in_desc.bEndpointAddress;
         hs_ep_out_desc.bEndpointAddress = fs_ep_out_desc.bEndpointAddress;
 
+        ret = usb_assign_descriptors(f, fs_printer_function,
+                        hs_printer_function, NULL);
+        if (ret)
+                return ret;
+
         dev->in_ep = in_ep;
         dev->out_ep = out_ep;
         return 0;
@@ -1018,6 +1025,7 @@ autoconf_fail:
 static void printer_func_unbind(struct usb_configuration *c,
                 struct usb_function *f)
 {
+        usb_free_all_descriptors(f);
 }
 
 static int printer_func_set_alt(struct usb_function *f,
@@ -1110,8 +1118,6 @@ static int __init printer_bind_config(struct usb_configuration *c)
         dev = &usb_printer_gadget;
 
         dev->function.name = shortname;
-        dev->function.descriptors = fs_printer_function;
-        dev->function.hs_descriptors = hs_printer_function;
         dev->function.bind = printer_func_bind;
         dev->function.setup = printer_func_setup;
         dev->function.unbind = printer_func_unbind;
diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c
index 8efbf08c3561..d4ca9f1f7f24 100644
--- a/drivers/usb/gadget/pxa25x_udc.c
+++ b/drivers/usb/gadget/pxa25x_udc.c
@@ -29,6 +29,7 @@
 #include <linux/list.h>
 #include <linux/interrupt.h>
 #include <linux/mm.h>
+#include <linux/platform_data/pxa2xx_udc.h>
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 #include <linux/irq.h>
@@ -59,9 +60,6 @@
 #include <mach/lubbock.h>
 #endif
 
-#include <asm/mach/udc_pxa2xx.h>
-
-
 /*
  * This driver handles the USB Device Controller (UDC) in Intel's PXA 25x
  * series processors.  The UDC for the IXP 4xx series is very similar.
diff --git a/drivers/usb/gadget/pxa27x_udc.h b/drivers/usb/gadget/pxa27x_udc.h
index a1d268c6f2cc..79d81a4b2344 100644
--- a/drivers/usb/gadget/pxa27x_udc.h
+++ b/drivers/usb/gadget/pxa27x_udc.h
@@ -418,7 +418,7 @@ struct udc_stats {
  * @irq: udc irq
  * @clk: udc clock
  * @usb_gadget: udc gadget structure
- * @driver: bound gadget (zero, g_ether, g_file_storage, ...)
+ * @driver: bound gadget (zero, g_ether, g_mass_storage, ...)
  * @dev: device
  * @mach: machine info, used to activate specific GPIO
  * @transceiver: external transceiver to handle vbus sense and D+ pullup
diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
index 6f696ee8b817..439c3f972f8c 100644
--- a/drivers/usb/gadget/s3c-hsotg.c
+++ b/drivers/usb/gadget/s3c-hsotg.c
@@ -3072,7 +3072,7 @@ static struct usb_gadget_ops s3c_hsotg_gadget_ops = {
  * creation) to give to the gadget driver. Setup the endpoint name, any
  * direction information and other state that may be required.
  */
-static void __devinit s3c_hsotg_initep(struct s3c_hsotg *hsotg,
+static void s3c_hsotg_initep(struct s3c_hsotg *hsotg,
                                        struct s3c_hsotg_ep *hs_ep,
                                        int epnum)
 {
@@ -3414,7 +3414,7 @@ static const struct file_operations ep_fops = {
  * with the same name as the device itself, in case we end up
  * with multiple blocks in future systems.
  */
-static void __devinit s3c_hsotg_create_debug(struct s3c_hsotg *hsotg)
+static void s3c_hsotg_create_debug(struct s3c_hsotg *hsotg)
 {
         struct dentry *root;
         unsigned epidx;
@@ -3460,7 +3460,7 @@ static void __devinit s3c_hsotg_create_debug(struct s3c_hsotg *hsotg)
  *
  * Cleanup (remove) the debugfs files for use on module exit.
  */
-static void __devexit s3c_hsotg_delete_debug(struct s3c_hsotg *hsotg)
+static void s3c_hsotg_delete_debug(struct s3c_hsotg *hsotg)
 {
         unsigned epidx;
 
@@ -3477,12 +3477,11 @@ static void __devexit s3c_hsotg_delete_debug(struct s3c_hsotg *hsotg)
 /**
  * s3c_hsotg_release - release callback for hsotg device
  * @dev: Device to for which release is called
+ *
+ * Nothing to do as the resource is allocated using devm_ API.
  */
 static void s3c_hsotg_release(struct device *dev)
 {
-        struct s3c_hsotg *hsotg = dev_get_drvdata(dev);
-
-        kfree(hsotg);
 }
 
 /**
@@ -3490,7 +3489,7 @@ static void s3c_hsotg_release(struct device *dev)
  * @pdev: The platform information for the driver
  */
 
-static int __devinit s3c_hsotg_probe(struct platform_device *pdev)
+static int s3c_hsotg_probe(struct platform_device *pdev)
 {
         struct s3c_hsotg_plat *plat = pdev->dev.platform_data;
         struct device *dev = &pdev->dev;
@@ -3675,7 +3674,7 @@ err_clk:
  * s3c_hsotg_remove - remove function for hsotg driver
  * @pdev: The platform information for the driver
  */
-static int __devexit s3c_hsotg_remove(struct platform_device *pdev)
+static int s3c_hsotg_remove(struct platform_device *pdev)
 {
         struct s3c_hsotg *hsotg = platform_get_drvdata(pdev);
 
@@ -3708,7 +3707,7 @@ static struct platform_driver s3c_hsotg_driver = {
                 .owner  = THIS_MODULE,
         },
         .probe          = s3c_hsotg_probe,
-        .remove         = __devexit_p(s3c_hsotg_remove),
+        .remove         = s3c_hsotg_remove,
         .suspend        = s3c_hsotg_suspend,
         .resume         = s3c_hsotg_resume,
 };
diff --git a/drivers/usb/gadget/s3c-hsudc.c b/drivers/usb/gadget/s3c-hsudc.c
index d8e785d4ad59..52379b11f080 100644
--- a/drivers/usb/gadget/s3c-hsudc.c
+++ b/drivers/usb/gadget/s3c-hsudc.c
@@ -1261,7 +1261,7 @@ static struct usb_gadget_ops s3c_hsudc_gadget_ops = {
         .vbus_draw      = s3c_hsudc_vbus_draw,
 };
 
-static int __devinit s3c_hsudc_probe(struct platform_device *pdev)
+static int s3c_hsudc_probe(struct platform_device *pdev)
 {
         struct device *dev = &pdev->dev;
         struct resource *res;
diff --git a/drivers/usb/gadget/storage_common.c b/drivers/usb/gadget/storage_common.c
index 8d9bcd8207c8..0e3ae43454a2 100644
--- a/drivers/usb/gadget/storage_common.c
+++ b/drivers/usb/gadget/storage_common.c
@@ -11,30 +11,10 @@
  * (at your option) any later version.
  */
 
-
 /*
  * This file requires the following identifiers used in USB strings to
  * be defined (each of type pointer to char):
- *  - fsg_string_manufacturer -- name of the manufacturer
- *  - fsg_string_product      -- name of the product
- *  - fsg_string_config       -- name of the configuration
  *  - fsg_string_interface    -- name of the interface
- * The first four are only needed when FSG_DESCRIPTORS_DEVICE_STRINGS
- * macro is defined prior to including this file.
- */
-
-/*
- * When FSG_NO_INTR_EP is defined fsg_fs_intr_in_desc and
- * fsg_hs_intr_in_desc objects as well as
- * FSG_FS_FUNCTION_PRE_EP_ENTRIES and FSG_HS_FUNCTION_PRE_EP_ENTRIES
- * macros are not defined.
- *
- * When FSG_NO_DEVICE_STRINGS is defined FSG_STRING_MANUFACTURER,
- * FSG_STRING_PRODUCT, FSG_STRING_SERIAL and FSG_STRING_CONFIG are not
- * defined (as well as corresponding entries in string tables are
- * missing) and FSG_STRING_INTERFACE has value of zero.
- *
- * When FSG_NO_OTG is defined fsg_otg_desc won't be defined.
  */
 
 /*
@@ -78,34 +58,6 @@
 #define LWARN(lun, fmt, args...)  dev_warn(&(lun)->dev, fmt, ## args)
 #define LINFO(lun, fmt, args...)  dev_info(&(lun)->dev, fmt, ## args)
 
-/*
- * Keep those macros in sync with those in
- * include/linux/usb/composite.h or else GCC will complain.  If they
- * are identical (the same names of arguments, white spaces in the
- * same places) GCC will allow redefinition otherwise (even if some
- * white space is removed or added) warning will be issued.
- *
- * Those macros are needed here because File Storage Gadget does not
- * include the composite.h header.  For composite gadgets those macros
- * are redundant since composite.h is included any way.
- *
- * One could check whether those macros are already defined (which
- * would indicate composite.h had been included) or not (which would
- * indicate we were in FSG) but this is not done because a warning is
- * desired if definitions here differ from the ones in composite.h.
- *
- * We want the definitions to match and be the same in File Storage
- * Gadget as well as Mass Storage Function (and so composite gadgets
- * using MSF).  If someone changes them in composite.h it will produce
- * a warning in this file when building MSF.
- */
-#define DBG(d, fmt, args...)     dev_dbg(&(d)->gadget->dev , fmt , ## args)
-#define VDBG(d, fmt, args...)    dev_vdbg(&(d)->gadget->dev , fmt , ## args)
-#define ERROR(d, fmt, args...)   dev_err(&(d)->gadget->dev , fmt , ## args)
-#define WARNING(d, fmt, args...) dev_warn(&(d)->gadget->dev , fmt , ## args)
-#define INFO(d, fmt, args...)    dev_info(&(d)->gadget->dev , fmt , ## args)
-
-
 
 #ifdef DUMP_MSGS
 
@@ -203,9 +155,12 @@ struct fsg_lun {
         struct device   dev;
 };
 
-#define fsg_lun_is_open(curlun) ((curlun)->filp != NULL)
+static inline bool fsg_lun_is_open(struct fsg_lun *curlun)
+{
+        return curlun->filp != NULL;
+}
 
-static struct fsg_lun *fsg_lun_from_dev(struct device *dev)
+static inline struct fsg_lun *fsg_lun_from_dev(struct device *dev)
 {
         return container_of(dev, struct fsg_lun, dev);
 }
@@ -308,26 +263,10 @@ static inline u32 get_unaligned_be24(u8 *buf)
 
 
 enum {
-#ifndef FSG_NO_DEVICE_STRINGS
-        FSG_STRING_MANUFACTURER = 1,
-        FSG_STRING_PRODUCT,
-        FSG_STRING_SERIAL,
-        FSG_STRING_CONFIG,
-#endif
         FSG_STRING_INTERFACE
 };
 
 
-#ifndef FSG_NO_OTG
-static struct usb_otg_descriptor
-fsg_otg_desc = {
-        .bLength =              sizeof fsg_otg_desc,
-        .bDescriptorType =      USB_DT_OTG,
-
-        .bmAttributes =         USB_OTG_SRP,
-};
-#endif
-
 /* There is only one interface. */
 
 static struct usb_interface_descriptor
@@ -367,37 +306,10 @@ fsg_fs_bulk_out_desc = {
         /* wMaxPacketSize set by autoconfiguration */
 };
 
-#ifndef FSG_NO_INTR_EP
-
-static struct usb_endpoint_descriptor
-fsg_fs_intr_in_desc = {
-        .bLength =              USB_DT_ENDPOINT_SIZE,
-        .bDescriptorType =      USB_DT_ENDPOINT,
-
-        .bEndpointAddress =     USB_DIR_IN,
-        .bmAttributes =         USB_ENDPOINT_XFER_INT,
-        .wMaxPacketSize =       cpu_to_le16(2),
-        .bInterval =            32,     /* frames -> 32 ms */
-};
-
-#ifndef FSG_NO_OTG
-#  define FSG_FS_FUNCTION_PRE_EP_ENTRIES        2
-#else
-#  define FSG_FS_FUNCTION_PRE_EP_ENTRIES        1
-#endif
-
-#endif
-
 static struct usb_descriptor_header *fsg_fs_function[] = {
-#ifndef FSG_NO_OTG
-        (struct usb_descriptor_header *) &fsg_otg_desc,
-#endif
         (struct usb_descriptor_header *) &fsg_intf_desc,
         (struct usb_descriptor_header *) &fsg_fs_bulk_in_desc,
         (struct usb_descriptor_header *) &fsg_fs_bulk_out_desc,
-#ifndef FSG_NO_INTR_EP
-        (struct usb_descriptor_header *) &fsg_fs_intr_in_desc,
-#endif
         NULL,
 };
 
@@ -431,37 +343,11 @@ fsg_hs_bulk_out_desc = {
         .bInterval =            1,      /* NAK every 1 uframe */
 };
 
-#ifndef FSG_NO_INTR_EP
-
-static struct usb_endpoint_descriptor
-fsg_hs_intr_in_desc = {
-        .bLength =              USB_DT_ENDPOINT_SIZE,
-        .bDescriptorType =      USB_DT_ENDPOINT,
-
-        /* bEndpointAddress copied from fs_intr_in_desc during fsg_bind() */
-        .bmAttributes =         USB_ENDPOINT_XFER_INT,
-        .wMaxPacketSize =       cpu_to_le16(2),
-        .bInterval =            9,      /* 2**(9-1) = 256 uframes -> 32 ms */
-};
-
-#ifndef FSG_NO_OTG
-#  define FSG_HS_FUNCTION_PRE_EP_ENTRIES        2
-#else
-#  define FSG_HS_FUNCTION_PRE_EP_ENTRIES        1
-#endif
-
-#endif
 
 static struct usb_descriptor_header *fsg_hs_function[] = {
-#ifndef FSG_NO_OTG
-        (struct usb_descriptor_header *) &fsg_otg_desc,
-#endif
         (struct usb_descriptor_header *) &fsg_intf_desc,
         (struct usb_descriptor_header *) &fsg_hs_bulk_in_desc,
         (struct usb_descriptor_header *) &fsg_hs_bulk_out_desc,
-#ifndef FSG_NO_INTR_EP
-        (struct usb_descriptor_header *) &fsg_hs_intr_in_desc,
-#endif
         NULL,
 };
 
@@ -499,34 +385,6 @@ static struct usb_ss_ep_comp_descriptor fsg_ss_bulk_out_comp_desc = {
         /*.bMaxBurst =          DYNAMIC, */
 };
 
-#ifndef FSG_NO_INTR_EP
-
-static struct usb_endpoint_descriptor
-fsg_ss_intr_in_desc = {
-        .bLength =              USB_DT_ENDPOINT_SIZE,
-        .bDescriptorType =      USB_DT_ENDPOINT,
-
-        /* bEndpointAddress copied from fs_intr_in_desc during fsg_bind() */
-        .bmAttributes =         USB_ENDPOINT_XFER_INT,
-        .wMaxPacketSize =       cpu_to_le16(2),
-        .bInterval =            9,      /* 2**(9-1) = 256 uframes -> 32 ms */
-};
-
-static struct usb_ss_ep_comp_descriptor fsg_ss_intr_in_comp_desc = {
-        .bLength =              sizeof(fsg_ss_bulk_in_comp_desc),
-        .bDescriptorType =      USB_DT_SS_ENDPOINT_COMP,
-
-        .wBytesPerInterval =    cpu_to_le16(2),
-};
-
-#ifndef FSG_NO_OTG
-#  define FSG_SS_FUNCTION_PRE_EP_ENTRIES        2
-#else
-#  define FSG_SS_FUNCTION_PRE_EP_ENTRIES        1
-#endif
-
-#endif
-
 static __maybe_unused struct usb_ext_cap_descriptor fsg_ext_cap_desc = {
         .bLength =              USB_DT_USB_EXT_CAP_SIZE,
         .bDescriptorType =      USB_DT_DEVICE_CAPABILITY,
@@ -563,18 +421,11 @@ static __maybe_unused struct usb_bos_descriptor fsg_bos_desc = {
 };
 
 static struct usb_descriptor_header *fsg_ss_function[] = {
-#ifndef FSG_NO_OTG
-        (struct usb_descriptor_header *) &fsg_otg_desc,
-#endif
         (struct usb_descriptor_header *) &fsg_intf_desc,
         (struct usb_descriptor_header *) &fsg_ss_bulk_in_desc,
         (struct usb_descriptor_header *) &fsg_ss_bulk_in_comp_desc,
         (struct usb_descriptor_header *) &fsg_ss_bulk_out_desc,
         (struct usb_descriptor_header *) &fsg_ss_bulk_out_comp_desc,
-#ifndef FSG_NO_INTR_EP
-        (struct usb_descriptor_header *) &fsg_ss_intr_in_desc,
-        (struct usb_descriptor_header *) &fsg_ss_intr_in_comp_desc,
-#endif
         NULL,
 };
 
@@ -594,12 +445,6 @@ fsg_ep_desc(struct usb_gadget *g, struct usb_endpoint_descriptor *fs,
 
 /* Static strings, in UTF-8 (for simplicity we use only ASCII characters) */
 static struct usb_string                fsg_strings[] = {
-#ifndef FSG_NO_DEVICE_STRINGS
-        {FSG_STRING_MANUFACTURER,       fsg_string_manufacturer},
-        {FSG_STRING_PRODUCT,            fsg_string_product},
-        {FSG_STRING_SERIAL,             ""},
-        {FSG_STRING_CONFIG,             fsg_string_config},
-#endif
         {FSG_STRING_INTERFACE,          fsg_string_interface},
         {}
 };
diff --git a/drivers/usb/gadget/tcm_usb_gadget.c b/drivers/usb/gadget/tcm_usb_gadget.c
index 97e68b38cfdf..7cacd6ae818e 100644
--- a/drivers/usb/gadget/tcm_usb_gadget.c
+++ b/drivers/usb/gadget/tcm_usb_gadget.c
@@ -1384,7 +1384,7 @@ static struct se_node_acl *usbg_alloc_fabric_acl(struct se_portal_group *se_tpg)
 
         nacl = kzalloc(sizeof(struct usbg_nacl), GFP_KERNEL);
         if (!nacl) {
-                printk(KERN_ERR "Unable to alocate struct usbg_nacl\n");
+                printk(KERN_ERR "Unable to allocate struct usbg_nacl\n");
                 return NULL;
         }
 
@@ -1794,9 +1794,10 @@ static int tcm_usbg_drop_nexus(struct usbg_tpg *tpg)
         tpg->tpg_nexus = NULL;
 
         kfree(tv_nexus);
+        ret = 0;
 out:
         mutex_unlock(&tpg->tpg_mutex);
-        return 0;
+        return ret;
 }
 
 static ssize_t tcm_usbg_tpg_store_nexus(
@@ -2139,6 +2140,7 @@ static struct usb_descriptor_header *uasp_fs_function_desc[] = {
         (struct usb_descriptor_header *) &uasp_status_pipe_desc,
         (struct usb_descriptor_header *) &uasp_fs_cmd_desc,
         (struct usb_descriptor_header *) &uasp_cmd_pipe_desc,
+        NULL,
 };
 
 static struct usb_descriptor_header *uasp_hs_function_desc[] = {
@@ -2239,6 +2241,7 @@ static int usbg_bind(struct usb_configuration *c, struct usb_function *f)
         struct usb_gadget       *gadget = c->cdev->gadget;
         struct usb_ep           *ep;
         int                     iface;
+        int                     ret;
 
         iface = usb_interface_id(c, f);
         if (iface < 0)
@@ -2289,6 +2292,11 @@ static int usbg_bind(struct usb_configuration *c, struct usb_function *f)
                 uasp_ss_status_desc.bEndpointAddress;
         uasp_fs_cmd_desc.bEndpointAddress = uasp_ss_cmd_desc.bEndpointAddress;
 
+        ret = usb_assign_descriptors(f, uasp_fs_function_desc,
+                        uasp_hs_function_desc, uasp_ss_function_desc);
+        if (ret)
+                goto ep_fail;
+
         return 0;
 ep_fail:
         pr_err("Can't claim all required eps\n");
@@ -2304,6 +2312,7 @@ static void usbg_unbind(struct usb_configuration *c, struct usb_function *f)
 {
         struct f_uas *fu = to_f_uas(f);
 
+        usb_free_all_descriptors(f);
         kfree(fu);
 }
 
@@ -2384,9 +2393,6 @@ static int usbg_cfg_bind(struct usb_configuration *c)
         if (!fu)
                 return -ENOMEM;
         fu->function.name = "Target Function";
-        fu->function.descriptors = uasp_fs_function_desc;
-        fu->function.hs_descriptors = uasp_hs_function_desc;
-        fu->function.ss_descriptors = uasp_ss_function_desc;
         fu->function.bind = usbg_bind;
         fu->function.unbind = usbg_unbind;
         fu->function.set_alt = usbg_set_alt;
diff --git a/drivers/usb/gadget/u_serial.c b/drivers/usb/gadget/u_serial.c
index f1739526820f..598dcc1212f0 100644
--- a/drivers/usb/gadget/u_serial.c
+++ b/drivers/usb/gadget/u_serial.c
@@ -887,7 +887,7 @@ static void gs_close(struct tty_struct *tty, struct file *file)
         pr_debug("gs_close: ttyGS%d (%p,%p) done!\n",
                         port->port_num, tty, file);
 
-        wake_up_interruptible(&port->port.close_wait);
+        wake_up(&port->port.close_wait);
 exit:
         spin_unlock_irq(&port->port_lock);
 }
@@ -1145,8 +1145,10 @@ int gserial_setup(struct usb_gadget *g, unsigned count)
 
         return status;
 fail:
-        while (count--)
+        while (count--) {
+                tty_port_destroy(&ports[count].port->port);
                 kfree(ports[count].port);
+        }
         put_tty_driver(gs_tty_driver);
         gs_tty_driver = NULL;
         return status;
@@ -1200,6 +1202,7 @@ void gserial_cleanup(void)
 
                 WARN_ON(port->port_usb != NULL);
 
+                tty_port_destroy(&port->port);
                 kfree(port);
         }
         n_ports = 0;
diff --git a/drivers/usb/gadget/udc-core.c b/drivers/usb/gadget/udc-core.c
index f3cd9690b101..4d90a800063c 100644
--- a/drivers/usb/gadget/udc-core.c
+++ b/drivers/usb/gadget/udc-core.c
@@ -439,16 +439,6 @@ static DEVICE_ATTR(name, S_IRUSR, usb_udc_##param##_show, NULL)
 static USB_UDC_SPEED_ATTR(current_speed, speed);
 static USB_UDC_SPEED_ATTR(maximum_speed, max_speed);
 
-/* TODO: Scheduled for removal in 3.8. */
-static ssize_t usb_udc_is_dualspeed_show(struct device *dev,
-                struct device_attribute *attr, char *buf)
-{
-        struct usb_udc          *udc = container_of(dev, struct usb_udc, dev);
-        return snprintf(buf, PAGE_SIZE, "%d\n",
-                        gadget_is_dualspeed(udc->gadget));
-}
-static DEVICE_ATTR(is_dualspeed, S_IRUSR, usb_udc_is_dualspeed_show, NULL);
-
 #define USB_UDC_ATTR(name)                                      \
 ssize_t usb_udc_##name##_show(struct device *dev,               \
                 struct device_attribute *attr, char *buf)       \
@@ -472,7 +462,6 @@ static struct attribute *usb_udc_attrs[] = {
         &dev_attr_current_speed.attr,
         &dev_attr_maximum_speed.attr,
 
-        &dev_attr_is_dualspeed.attr,
         &dev_attr_is_otg.attr,
         &dev_attr_is_a_peripheral.attr,
         &dev_attr_b_hnp_enable.attr,
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 3f1431d37e1c..d6bb128ce21e 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -95,6 +95,11 @@ config USB_EHCI_TT_NEWSCHED
 
           If unsure, say Y.
 
+config USB_EHCI_PCI
+        tristate
+        depends on USB_EHCI_HCD && PCI
+        default y
+
 config USB_EHCI_HCD_PMC_MSP
         tristate "EHCI support for on-chip PMC MSP71xx USB controller"
         depends on USB_EHCI_HCD && MSP_HAS_USB
@@ -215,9 +220,13 @@ config USB_W90X900_EHCI
                 Enables support for the W90X900 USB controller
 
 config USB_CNS3XXX_EHCI
-        bool "Cavium CNS3XXX EHCI Module"
+        bool "Cavium CNS3XXX EHCI Module (DEPRECATED)"
         depends on USB_EHCI_HCD && ARCH_CNS3XXX
+        select USB_EHCI_HCD_PLATFORM
         ---help---
+          This option is deprecated now and the driver was removed, use
+          USB_EHCI_HCD_PLATFORM instead.
+
           Enable support for the CNS3XXX SOC's on-chip EHCI controller.
           It is needed for high-speed (480Mbit/sec) USB 2.0 device
           support.
@@ -333,16 +342,6 @@ config USB_OHCI_ATH79
           Enables support for the built-in OHCI controller present on the
           Atheros AR71XX/AR7240 SoCs.
 
-config USB_OHCI_HCD_PPC_SOC
-        bool "OHCI support for on-chip PPC USB controller"
-        depends on USB_OHCI_HCD && (STB03xxx || PPC_MPC52xx)
-        default y
-        select USB_OHCI_BIG_ENDIAN_DESC
-        select USB_OHCI_BIG_ENDIAN_MMIO
-        ---help---
-          Enables support for the USB controller on the MPC52xx or
-          STB03xxx processor chip.  If unsure, say Y.
-
 config USB_OHCI_HCD_PPC_OF_BE
         bool "OHCI support for OF platform bus (big endian)"
         depends on USB_OHCI_HCD && PPC_OF
@@ -393,9 +392,13 @@ config USB_OHCI_HCD_SSB
           If unsure, say N.
 
 config USB_OHCI_SH
-        bool "OHCI support for SuperH USB controller"
+        bool "OHCI support for SuperH USB controller (DEPRECATED)"
         depends on USB_OHCI_HCD && SUPERH
+        select USB_OHCI_HCD_PLATFORM
         ---help---
+          This option is deprecated now and the driver was removed, use
+          USB_OHCI_HCD_PLATFORM instead.
+
           Enables support for the on-chip OHCI controller on the SuperH.
           If you use the PCI OHCI controller, this option is not necessary.
 
@@ -406,9 +409,13 @@ config USB_OHCI_EXYNOS
          Enable support for the Samsung Exynos SOC's on-chip OHCI controller.
 
 config USB_CNS3XXX_OHCI
-        bool "Cavium CNS3XXX OHCI Module"
+        bool "Cavium CNS3XXX OHCI Module (DEPRECATED)"
         depends on USB_OHCI_HCD && ARCH_CNS3XXX
+        select USB_OHCI_HCD_PLATFORM
         ---help---
+          This option is deprecated now and the driver was removed, use
+          USB_OHCI_HCD_PLATFORM instead.
+
           Enable support for the CNS3XXX SOC's on-chip OHCI controller.
           It is needed for low-speed USB 1.0 device support.
 
@@ -423,7 +430,7 @@ config USB_OHCI_HCD_PLATFORM
           If unsure, say N.
 
 config USB_EHCI_HCD_PLATFORM
-        bool "Generic EHCI driver for a platform device"
+        tristate "Generic EHCI driver for a platform device"
         depends on USB_EHCI_HCD
         default n
         ---help---
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index 9e0a89ced15c..1eb4c3006e9e 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -24,6 +24,9 @@ obj-$(CONFIG_USB_WHCI_HCD)	+= whci/
 obj-$(CONFIG_PCI)               += pci-quirks.o
 
 obj-$(CONFIG_USB_EHCI_HCD)      += ehci-hcd.o
+obj-$(CONFIG_USB_EHCI_PCI)      += ehci-pci.o
+obj-$(CONFIG_USB_EHCI_HCD_PLATFORM)     += ehci-platform.o
+
 obj-$(CONFIG_USB_OXU210HP_HCD)  += oxu210hp-hcd.o
 obj-$(CONFIG_USB_ISP116X_HCD)   += isp116x-hcd.o
 obj-$(CONFIG_USB_ISP1362_HCD)   += isp1362-hcd.o
@@ -40,6 +43,5 @@ obj-$(CONFIG_USB_HWA_HCD)	+= hwa-hc.o
 obj-$(CONFIG_USB_IMX21_HCD)     += imx21-hcd.o
 obj-$(CONFIG_USB_FSL_MPH_DR_OF) += fsl-mph-dr-of.o
 obj-$(CONFIG_USB_OCTEON2_COMMON) += octeon2-common.o
-obj-$(CONFIG_MIPS_ALCHEMY)      += alchemy-common.o
 obj-$(CONFIG_USB_HCD_BCMA)      += bcma-hcd.o
 obj-$(CONFIG_USB_HCD_SSB)       += ssb-hcd.o
diff --git a/drivers/usb/host/alchemy-common.c b/drivers/usb/host/alchemy-common.c
deleted file mode 100644
index 936af8359fb2..000000000000
--- a/drivers/usb/host/alchemy-common.c
+++ /dev/null
@@ -1,614 +0,0 @@
-/*
- * USB block power/access management abstraction.
- *
- * Au1000+: The OHCI block control register is at the far end of the OHCI memory
- *          area. Au1550 has OHCI on different base address. No need to handle
- *          UDC here.
- * Au1200:  one register to control access and clocks to O/EHCI, UDC and OTG
- *          as well as the PHY for EHCI and UDC.
- *
- */
-
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/module.h>
-#include <linux/spinlock.h>
-#include <linux/syscore_ops.h>
-#include <asm/mach-au1x00/au1000.h>
-
-/* control register offsets */
-#define AU1000_OHCICFG  0x7fffc
-#define AU1550_OHCICFG  0x07ffc
-#define AU1200_USBCFG   0x04
-
-/* Au1000 USB block config bits */
-#define USBHEN_RD       (1 << 4)                /* OHCI reset-done indicator */
-#define USBHEN_CE       (1 << 3)                /* OHCI block clock enable */
-#define USBHEN_E        (1 << 2)                /* OHCI block enable */
-#define USBHEN_C        (1 << 1)                /* OHCI block coherency bit */
-#define USBHEN_BE       (1 << 0)                /* OHCI Big-Endian */
-
-/* Au1200 USB config bits */
-#define USBCFG_PFEN     (1 << 31)               /* prefetch enable (undoc) */
-#define USBCFG_RDCOMB   (1 << 30)               /* read combining (undoc) */
-#define USBCFG_UNKNOWN  (5 << 20)               /* unknown, leave this way */
-#define USBCFG_SSD      (1 << 23)               /* serial short detect en */
-#define USBCFG_PPE      (1 << 19)               /* HS PHY PLL */
-#define USBCFG_UCE      (1 << 18)               /* UDC clock enable */
-#define USBCFG_ECE      (1 << 17)               /* EHCI clock enable */
-#define USBCFG_OCE      (1 << 16)               /* OHCI clock enable */
-#define USBCFG_FLA(x)   (((x) & 0x3f) << 8)
-#define USBCFG_UCAM     (1 << 7)                /* coherent access (undoc) */
-#define USBCFG_GME      (1 << 6)                /* OTG mem access */
-#define USBCFG_DBE      (1 << 5)                /* UDC busmaster enable */
-#define USBCFG_DME      (1 << 4)                /* UDC mem enable */
-#define USBCFG_EBE      (1 << 3)                /* EHCI busmaster enable */
-#define USBCFG_EME      (1 << 2)                /* EHCI mem enable */
-#define USBCFG_OBE      (1 << 1)                /* OHCI busmaster enable */
-#define USBCFG_OME      (1 << 0)                /* OHCI mem enable */
-#define USBCFG_INIT_AU1200      (USBCFG_PFEN | USBCFG_RDCOMB | USBCFG_UNKNOWN |\
-                                 USBCFG_SSD | USBCFG_FLA(0x20) | USBCFG_UCAM | \
-                                 USBCFG_GME | USBCFG_DBE | USBCFG_DME |        \
-                                 USBCFG_EBE | USBCFG_EME | USBCFG_OBE |        \
-                                 USBCFG_OME)
-
-/* Au1300 USB config registers */
-#define USB_DWC_CTRL1           0x00
-#define USB_DWC_CTRL2           0x04
-#define USB_VBUS_TIMER          0x10
-#define USB_SBUS_CTRL           0x14
-#define USB_MSR_ERR             0x18
-#define USB_DWC_CTRL3           0x1C
-#define USB_DWC_CTRL4           0x20
-#define USB_OTG_STATUS          0x28
-#define USB_DWC_CTRL5           0x2C
-#define USB_DWC_CTRL6           0x30
-#define USB_DWC_CTRL7           0x34
-#define USB_PHY_STATUS          0xC0
-#define USB_INT_STATUS          0xC4
-#define USB_INT_ENABLE          0xC8
-
-#define USB_DWC_CTRL1_OTGD      0x04 /* set to DISable OTG */
-#define USB_DWC_CTRL1_HSTRS     0x02 /* set to ENable EHCI */
-#define USB_DWC_CTRL1_DCRS      0x01 /* set to ENable UDC */
-
-#define USB_DWC_CTRL2_PHY1RS    0x04 /* set to enable PHY1 */
-#define USB_DWC_CTRL2_PHY0RS    0x02 /* set to enable PHY0 */
-#define USB_DWC_CTRL2_PHYRS     0x01 /* set to enable PHY */
-
-#define USB_DWC_CTRL3_OHCI1_CKEN        (1 << 19)
-#define USB_DWC_CTRL3_OHCI0_CKEN        (1 << 18)
-#define USB_DWC_CTRL3_EHCI0_CKEN        (1 << 17)
-#define USB_DWC_CTRL3_OTG0_CKEN         (1 << 16)
-
-#define USB_SBUS_CTRL_SBCA              0x04 /* coherent access */
-
-#define USB_INTEN_FORCE                 0x20
-#define USB_INTEN_PHY                   0x10
-#define USB_INTEN_UDC                   0x08
-#define USB_INTEN_EHCI                  0x04
-#define USB_INTEN_OHCI1                 0x02
-#define USB_INTEN_OHCI0                 0x01
-
-static DEFINE_SPINLOCK(alchemy_usb_lock);
-
-static inline void __au1300_usb_phyctl(void __iomem *base, int enable)
-{
-        unsigned long r, s;
-
-        r = __raw_readl(base + USB_DWC_CTRL2);
-        s = __raw_readl(base + USB_DWC_CTRL3);
-
-        s &= USB_DWC_CTRL3_OHCI1_CKEN | USB_DWC_CTRL3_OHCI0_CKEN |
-                USB_DWC_CTRL3_EHCI0_CKEN | USB_DWC_CTRL3_OTG0_CKEN;
-
-        if (enable) {
-                /* simply enable all PHYs */
-                r |= USB_DWC_CTRL2_PHY1RS | USB_DWC_CTRL2_PHY0RS |
-                     USB_DWC_CTRL2_PHYRS;
-                __raw_writel(r, base + USB_DWC_CTRL2);
-                wmb();
-        } else if (!s) {
-                /* no USB block active, do disable all PHYs */
-                r &= ~(USB_DWC_CTRL2_PHY1RS | USB_DWC_CTRL2_PHY0RS |
-                       USB_DWC_CTRL2_PHYRS);
-                __raw_writel(r, base + USB_DWC_CTRL2);
-                wmb();
-        }
-}
-
-static inline void __au1300_ohci_control(void __iomem *base, int enable, int id)
-{
-        unsigned long r;
-
-        if (enable) {
-                __raw_writel(1, base + USB_DWC_CTRL7);  /* start OHCI clock */
-                wmb();
-
-                r = __raw_readl(base + USB_DWC_CTRL3);  /* enable OHCI block */
-                r |= (id == 0) ? USB_DWC_CTRL3_OHCI0_CKEN
-                               : USB_DWC_CTRL3_OHCI1_CKEN;
-                __raw_writel(r, base + USB_DWC_CTRL3);
-                wmb();
-
-                __au1300_usb_phyctl(base, enable);      /* power up the PHYs */
-
-                r = __raw_readl(base + USB_INT_ENABLE);
-                r |= (id == 0) ? USB_INTEN_OHCI0 : USB_INTEN_OHCI1;
-                __raw_writel(r, base + USB_INT_ENABLE);
-                wmb();
-
-                /* reset the OHCI start clock bit */
-                __raw_writel(0, base + USB_DWC_CTRL7);
-                wmb();
-        } else {
-                r = __raw_readl(base + USB_INT_ENABLE);
-                r &= ~((id == 0) ? USB_INTEN_OHCI0 : USB_INTEN_OHCI1);
-                __raw_writel(r, base + USB_INT_ENABLE);
-                wmb();
-
-                r = __raw_readl(base + USB_DWC_CTRL3);
-                r &= ~((id == 0) ? USB_DWC_CTRL3_OHCI0_CKEN
-                                 : USB_DWC_CTRL3_OHCI1_CKEN);
-                __raw_writel(r, base + USB_DWC_CTRL3);
-                wmb();
-
-                __au1300_usb_phyctl(base, enable);
-        }
-}
-
-static inline void __au1300_ehci_control(void __iomem *base, int enable)
-{
-        unsigned long r;
-
-        if (enable) {
-                r = __raw_readl(base + USB_DWC_CTRL3);
-                r |= USB_DWC_CTRL3_EHCI0_CKEN;
-                __raw_writel(r, base + USB_DWC_CTRL3);
-                wmb();
-
-                r = __raw_readl(base + USB_DWC_CTRL1);
-                r |= USB_DWC_CTRL1_HSTRS;
-                __raw_writel(r, base + USB_DWC_CTRL1);
-                wmb();
-
-                __au1300_usb_phyctl(base, enable);
-
-                r = __raw_readl(base + USB_INT_ENABLE);
-                r |= USB_INTEN_EHCI;
-                __raw_writel(r, base + USB_INT_ENABLE);
-                wmb();
-        } else {
-                r = __raw_readl(base + USB_INT_ENABLE);
-                r &= ~USB_INTEN_EHCI;
-                __raw_writel(r, base + USB_INT_ENABLE);
-                wmb();
-
-                r = __raw_readl(base + USB_DWC_CTRL1);
-                r &= ~USB_DWC_CTRL1_HSTRS;
-                __raw_writel(r, base + USB_DWC_CTRL1);
-                wmb();
-
-                r = __raw_readl(base + USB_DWC_CTRL3);
-                r &= ~USB_DWC_CTRL3_EHCI0_CKEN;
-                __raw_writel(r, base + USB_DWC_CTRL3);
-                wmb();
-
-                __au1300_usb_phyctl(base, enable);
-        }
-}
-
-static inline void __au1300_udc_control(void __iomem *base, int enable)
-{
-        unsigned long r;
-
-        if (enable) {
-                r = __raw_readl(base + USB_DWC_CTRL1);
-                r |= USB_DWC_CTRL1_DCRS;
-                __raw_writel(r, base + USB_DWC_CTRL1);
-                wmb();
-
-                __au1300_usb_phyctl(base, enable);
-
-                r = __raw_readl(base + USB_INT_ENABLE);
-                r |= USB_INTEN_UDC;
-                __raw_writel(r, base + USB_INT_ENABLE);
-                wmb();
-        } else {
-                r = __raw_readl(base + USB_INT_ENABLE);
-                r &= ~USB_INTEN_UDC;
-                __raw_writel(r, base + USB_INT_ENABLE);
-                wmb();
-
-                r = __raw_readl(base + USB_DWC_CTRL1);
-                r &= ~USB_DWC_CTRL1_DCRS;
-                __raw_writel(r, base + USB_DWC_CTRL1);
-                wmb();
-
-                __au1300_usb_phyctl(base, enable);
-        }
-}
-
-static inline void __au1300_otg_control(void __iomem *base, int enable)
-{
-        unsigned long r;
-        if (enable) {
-                r = __raw_readl(base + USB_DWC_CTRL3);
-                r |= USB_DWC_CTRL3_OTG0_CKEN;
-                __raw_writel(r, base + USB_DWC_CTRL3);
-                wmb();
-
-                r = __raw_readl(base + USB_DWC_CTRL1);
-                r &= ~USB_DWC_CTRL1_OTGD;
-                __raw_writel(r, base + USB_DWC_CTRL1);
-                wmb();
-
-                __au1300_usb_phyctl(base, enable);
-        } else {
-                r = __raw_readl(base + USB_DWC_CTRL1);
-                r |= USB_DWC_CTRL1_OTGD;
-                __raw_writel(r, base + USB_DWC_CTRL1);
-                wmb();
-
-                r = __raw_readl(base + USB_DWC_CTRL3);
-                r &= ~USB_DWC_CTRL3_OTG0_CKEN;
-                __raw_writel(r, base + USB_DWC_CTRL3);
-                wmb();
-
-                __au1300_usb_phyctl(base, enable);
-        }
-}
-
-static inline int au1300_usb_control(int block, int enable)
-{
-        void __iomem *base =
-                (void __iomem *)KSEG1ADDR(AU1300_USB_CTL_PHYS_ADDR);
-        int ret = 0;
-
-        switch (block) {
-        case ALCHEMY_USB_OHCI0:
-                __au1300_ohci_control(base, enable, 0);
-                break;
-        case ALCHEMY_USB_OHCI1:
-                __au1300_ohci_control(base, enable, 1);
-                break;
-        case ALCHEMY_USB_EHCI0:
-                __au1300_ehci_control(base, enable);
-                break;
-        case ALCHEMY_USB_UDC0:
-                __au1300_udc_control(base, enable);
-                break;
-        case ALCHEMY_USB_OTG0:
-                __au1300_otg_control(base, enable);
-                break;
-        default:
-                ret = -ENODEV;
-        }
-        return ret;
-}
-
-static inline void au1300_usb_init(void)
-{
-        void __iomem *base =
-                (void __iomem *)KSEG1ADDR(AU1300_USB_CTL_PHYS_ADDR);
-
-        /* set some sane defaults.  Note: we don't fiddle with DWC_CTRL4
-         * here at all: Port 2 routing (EHCI or UDC) must be set either
-         * by boot firmware or platform init code; I can't autodetect
-         * a sane setting.
-         */
-        __raw_writel(0, base + USB_INT_ENABLE); /* disable all USB irqs */
-        wmb();
-        __raw_writel(0, base + USB_DWC_CTRL3); /* disable all clocks */
-        wmb();
-        __raw_writel(~0, base + USB_MSR_ERR); /* clear all errors */
-        wmb();
-        __raw_writel(~0, base + USB_INT_STATUS); /* clear int status */
-        wmb();
-        /* set coherent access bit */
-        __raw_writel(USB_SBUS_CTRL_SBCA, base + USB_SBUS_CTRL);
-        wmb();
-}
-
-static inline void __au1200_ohci_control(void __iomem *base, int enable)
-{
-        unsigned long r = __raw_readl(base + AU1200_USBCFG);
-        if (enable) {
-                __raw_writel(r | USBCFG_OCE, base + AU1200_USBCFG);
-                wmb();
-                udelay(2000);
-        } else {
-                __raw_writel(r & ~USBCFG_OCE, base + AU1200_USBCFG);
-                wmb();
-                udelay(1000);
-        }
-}
-
-static inline void __au1200_ehci_control(void __iomem *base, int enable)
-{
-        unsigned long r = __raw_readl(base + AU1200_USBCFG);
-        if (enable) {
-                __raw_writel(r | USBCFG_ECE | USBCFG_PPE, base + AU1200_USBCFG);
-                wmb();
-                udelay(1000);
-        } else {
-                if (!(r & USBCFG_UCE))          /* UDC also off? */
-                        r &= ~USBCFG_PPE;       /* yes: disable HS PHY PLL */
-                __raw_writel(r & ~USBCFG_ECE, base + AU1200_USBCFG);
-                wmb();
-                udelay(1000);
-        }
-}
-
-static inline void __au1200_udc_control(void __iomem *base, int enable)
-{
-        unsigned long r = __raw_readl(base + AU1200_USBCFG);
-        if (enable) {
-                __raw_writel(r | USBCFG_UCE | USBCFG_PPE, base + AU1200_USBCFG);
-                wmb();
-        } else {
-                if (!(r & USBCFG_ECE))          /* EHCI also off? */
-                        r &= ~USBCFG_PPE;       /* yes: disable HS PHY PLL */
-                __raw_writel(r & ~USBCFG_UCE, base + AU1200_USBCFG);
-                wmb();
-        }
-}
-
-static inline int au1200_coherency_bug(void)
-{
-#if defined(CONFIG_DMA_COHERENT)
-        /* Au1200 AB USB does not support coherent memory */
-        if (!(read_c0_prid() & 0xff)) {
-                printk(KERN_INFO "Au1200 USB: this is chip revision AB !!\n");
-                printk(KERN_INFO "Au1200 USB: update your board or re-configure"
-                                 " the kernel\n");
-                return -ENODEV;
-        }
-#endif
-        return 0;
-}
-
-static inline int au1200_usb_control(int block, int enable)
-{
-        void __iomem *base =
-                        (void __iomem *)KSEG1ADDR(AU1200_USB_CTL_PHYS_ADDR);
-        int ret = 0;
-
-        switch (block) {
-        case ALCHEMY_USB_OHCI0:
-                ret = au1200_coherency_bug();
-                if (ret && enable)
-                        goto out;
-                __au1200_ohci_control(base, enable);
-                break;
-        case ALCHEMY_USB_UDC0:
-                __au1200_udc_control(base, enable);
-                break;
-        case ALCHEMY_USB_EHCI0:
-                ret = au1200_coherency_bug();
-                if (ret && enable)
-                        goto out;
-                __au1200_ehci_control(base, enable);
-                break;
-        default:
-                ret = -ENODEV;
-        }
-out:
-        return ret;
-}
-
-
-/* initialize USB block(s) to a known working state */
-static inline void au1200_usb_init(void)
-{
-        void __iomem *base =
-                        (void __iomem *)KSEG1ADDR(AU1200_USB_CTL_PHYS_ADDR);
-        __raw_writel(USBCFG_INIT_AU1200, base + AU1200_USBCFG);
-        wmb();
-        udelay(1000);
-}
-
-static inline void au1000_usb_init(unsigned long rb, int reg)
-{
-        void __iomem *base = (void __iomem *)KSEG1ADDR(rb + reg);
-        unsigned long r = __raw_readl(base);
-
-#if defined(__BIG_ENDIAN)
-        r |= USBHEN_BE;
-#endif
-        r |= USBHEN_C;
-
-        __raw_writel(r, base);
-        wmb();
-        udelay(1000);
-}
-
-
-static inline void __au1xx0_ohci_control(int enable, unsigned long rb, int creg)
-{
-        void __iomem *base = (void __iomem *)KSEG1ADDR(rb);
-        unsigned long r = __raw_readl(base + creg);
-
-        if (enable) {
-                __raw_writel(r | USBHEN_CE, base + creg);
-                wmb();
-                udelay(1000);
-                __raw_writel(r | USBHEN_CE | USBHEN_E, base + creg);
-                wmb();
-                udelay(1000);
-
-                /* wait for reset complete (read reg twice: au1500 erratum) */
-                while (__raw_readl(base + creg),
-                        !(__raw_readl(base + creg) & USBHEN_RD))
-                        udelay(1000);
-        } else {
-                __raw_writel(r & ~(USBHEN_CE | USBHEN_E), base + creg);
-                wmb();
-        }
-}
-
-static inline int au1000_usb_control(int block, int enable, unsigned long rb,
-                                     int creg)
-{
-        int ret = 0;
-
-        switch (block) {
-        case ALCHEMY_USB_OHCI0:
-                __au1xx0_ohci_control(enable, rb, creg);
-                break;
-        default:
-                ret = -ENODEV;
-        }
-        return ret;
-}
-
-/*
- * alchemy_usb_control - control Alchemy on-chip USB blocks
- * @block:      USB block to target
- * @enable:     set 1 to enable a block, 0 to disable
- */
-int alchemy_usb_control(int block, int enable)
-{
-        unsigned long flags;
-        int ret;
-
-        spin_lock_irqsave(&alchemy_usb_lock, flags);
-        switch (alchemy_get_cputype()) {
-        case ALCHEMY_CPU_AU1000:
-        case ALCHEMY_CPU_AU1500:
-        case ALCHEMY_CPU_AU1100:
-                ret = au1000_usb_control(block, enable,
-                                AU1000_USB_OHCI_PHYS_ADDR, AU1000_OHCICFG);
-                break;
-        case ALCHEMY_CPU_AU1550:
-                ret = au1000_usb_control(block, enable,
-                                AU1550_USB_OHCI_PHYS_ADDR, AU1550_OHCICFG);
-                break;
-        case ALCHEMY_CPU_AU1200:
-                ret = au1200_usb_control(block, enable);
-                break;
-        case ALCHEMY_CPU_AU1300:
-                ret = au1300_usb_control(block, enable);
-                break;
-        default:
-                ret = -ENODEV;
-        }
-        spin_unlock_irqrestore(&alchemy_usb_lock, flags);
-        return ret;
-}
-EXPORT_SYMBOL_GPL(alchemy_usb_control);
-
-
-static unsigned long alchemy_usb_pmdata[2];
-
-static void au1000_usb_pm(unsigned long br, int creg, int susp)
-{
-        void __iomem *base = (void __iomem *)KSEG1ADDR(br);
-
-        if (susp) {
-                alchemy_usb_pmdata[0] = __raw_readl(base + creg);
-                /* There appears to be some undocumented reset register.... */
-                __raw_writel(0, base + 0x04);
-                wmb();
-                __raw_writel(0, base + creg);
-                wmb();
-        } else {
-                __raw_writel(alchemy_usb_pmdata[0], base + creg);
-                wmb();
-        }
-}
-
-static void au1200_usb_pm(int susp)
-{
-        void __iomem *base =
-                        (void __iomem *)KSEG1ADDR(AU1200_USB_OTG_PHYS_ADDR);
-        if (susp) {
-                /* save OTG_CAP/MUX registers which indicate port routing */
-                /* FIXME: write an OTG driver to do that */
-                alchemy_usb_pmdata[0] = __raw_readl(base + 0x00);
-                alchemy_usb_pmdata[1] = __raw_readl(base + 0x04);
-        } else {
-                /* restore access to all MMIO areas */
-                au1200_usb_init();
-
-                /* restore OTG_CAP/MUX registers */
-                __raw_writel(alchemy_usb_pmdata[0], base + 0x00);
-                __raw_writel(alchemy_usb_pmdata[1], base + 0x04);
-                wmb();
-        }
-}
-
-static void au1300_usb_pm(int susp)
-{
-        void __iomem *base =
-                        (void __iomem *)KSEG1ADDR(AU1300_USB_CTL_PHYS_ADDR);
-        /* remember Port2 routing */
-        if (susp) {
-                alchemy_usb_pmdata[0] = __raw_readl(base + USB_DWC_CTRL4);
-        } else {
-                au1300_usb_init();
-                __raw_writel(alchemy_usb_pmdata[0], base + USB_DWC_CTRL4);
-                wmb();
-        }
-}
-
-static void alchemy_usb_pm(int susp)
-{
-        switch (alchemy_get_cputype()) {
-        case ALCHEMY_CPU_AU1000:
-        case ALCHEMY_CPU_AU1500:
-        case ALCHEMY_CPU_AU1100:
-                au1000_usb_pm(AU1000_USB_OHCI_PHYS_ADDR, AU1000_OHCICFG, susp);
-                break;
-        case ALCHEMY_CPU_AU1550:
-                au1000_usb_pm(AU1550_USB_OHCI_PHYS_ADDR, AU1550_OHCICFG, susp);
-                break;
-        case ALCHEMY_CPU_AU1200:
-                au1200_usb_pm(susp);
-                break;
-        case ALCHEMY_CPU_AU1300:
-                au1300_usb_pm(susp);
-                break;
-        }
-}
-
-static int alchemy_usb_suspend(void)
-{
-        alchemy_usb_pm(1);
-        return 0;
-}
-
-static void alchemy_usb_resume(void)
-{
-        alchemy_usb_pm(0);
-}
-
-static struct syscore_ops alchemy_usb_pm_ops = {
-        .suspend        = alchemy_usb_suspend,
-        .resume         = alchemy_usb_resume,
-};
-
-static int __init alchemy_usb_init(void)
-{
-        switch (alchemy_get_cputype()) {
-        case ALCHEMY_CPU_AU1000:
-        case ALCHEMY_CPU_AU1500:
-        case ALCHEMY_CPU_AU1100:
-                au1000_usb_init(AU1000_USB_OHCI_PHYS_ADDR, AU1000_OHCICFG);
-                break;
-        case ALCHEMY_CPU_AU1550:
-                au1000_usb_init(AU1550_USB_OHCI_PHYS_ADDR, AU1550_OHCICFG);
-                break;
-        case ALCHEMY_CPU_AU1200:
-                au1200_usb_init();
-                break;
-        case ALCHEMY_CPU_AU1300:
-                au1300_usb_init();
-                break;
-        }
-
-        register_syscore_ops(&alchemy_usb_pm_ops);
-
-        return 0;
-}
-arch_initcall(alchemy_usb_init);
diff --git a/drivers/usb/host/bcma-hcd.c b/drivers/usb/host/bcma-hcd.c
index 443da21d73ca..df13d425e9c5 100644
--- a/drivers/usb/host/bcma-hcd.c
+++ b/drivers/usb/host/bcma-hcd.c
@@ -54,7 +54,7 @@ static int bcma_wait_bits(struct bcma_device *dev, u16 reg, u32 bitmask,
         return -ETIMEDOUT;
 }
 
-static void __devinit bcma_hcd_4716wa(struct bcma_device *dev)
+static void bcma_hcd_4716wa(struct bcma_device *dev)
 {
 #ifdef CONFIG_BCMA_DRIVER_MIPS
         /* Work around for 4716 failures. */
@@ -88,7 +88,7 @@ static void __devinit bcma_hcd_4716wa(struct bcma_device *dev)
 }
 
 /* based on arch/mips/brcm-boards/bcm947xx/pcibios.c */
-static void __devinit bcma_hcd_init_chip(struct bcma_device *dev)
+static void bcma_hcd_init_chip(struct bcma_device *dev)
 {
         u32 tmp;
 
@@ -165,8 +165,7 @@ static const struct usb_ehci_pdata ehci_pdata = {
 static const struct usb_ohci_pdata ohci_pdata = {
 };
 
-static struct platform_device * __devinit
-bcma_hcd_create_pdev(struct bcma_device *dev, bool ohci, u32 addr)
+static struct platform_device *bcma_hcd_create_pdev(struct bcma_device *dev, bool ohci, u32 addr)
 {
         struct platform_device *hci_dev;
         struct resource hci_res[2];
@@ -212,7 +211,7 @@ err_alloc:
         return ERR_PTR(ret);
 }
 
-static int __devinit bcma_hcd_probe(struct bcma_device *dev)
+static int bcma_hcd_probe(struct bcma_device *dev)
 {
         int err;
         u16 chipid_top;
@@ -266,7 +265,7 @@ err_free_usb_dev:
         return err;
 }
 
-static void __devexit bcma_hcd_remove(struct bcma_device *dev)
+static void bcma_hcd_remove(struct bcma_device *dev)
 {
         struct bcma_hcd_device *usb_dev = bcma_get_drvdata(dev);
         struct platform_device *ohci_dev = usb_dev->ohci_dev;
@@ -306,7 +305,7 @@ static int bcma_hcd_resume(struct bcma_device *dev)
 #define bcma_hcd_resume NULL
 #endif /* CONFIG_PM */
 
-static const struct bcma_device_id bcma_hcd_table[] __devinitconst = {
+static const struct bcma_device_id bcma_hcd_table[] = {
         BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_USB20_HOST, BCMA_ANY_REV, BCMA_ANY_CLASS),
         BCMA_CORETABLE_END
 };
@@ -316,7 +315,7 @@ static struct bcma_driver bcma_hcd_driver = {
         .name           = KBUILD_MODNAME,
         .id_table       = bcma_hcd_table,
         .probe          = bcma_hcd_probe,
-        .remove         = __devexit_p(bcma_hcd_remove),
+        .remove         = bcma_hcd_remove,
         .shutdown       = bcma_hcd_shutdown,
         .suspend        = bcma_hcd_suspend,
         .resume         = bcma_hcd_resume,
diff --git a/drivers/usb/host/ehci-atmel.c b/drivers/usb/host/ehci-atmel.c
index 411bb74152eb..27639487f7ac 100644
--- a/drivers/usb/host/ehci-atmel.c
+++ b/drivers/usb/host/ehci-atmel.c
@@ -53,18 +53,11 @@ static void atmel_stop_ehci(struct platform_device *pdev)
 static int ehci_atmel_setup(struct usb_hcd *hcd)
 {
         struct ehci_hcd *ehci = hcd_to_ehci(hcd);
-        int retval;
 
         /* registers start at offset 0x0 */
         ehci->caps = hcd->regs;
 
-        retval = ehci_setup(hcd);
-        if (retval)
-                return retval;
-
-        ehci_port_power(ehci, 0);
-
-        return retval;
+        return ehci_setup(hcd);
 }
 
 static const struct hc_driver ehci_atmel_hc_driver = {
@@ -104,7 +97,7 @@ static const struct hc_driver ehci_atmel_hc_driver = {
 
 static u64 at91_ehci_dma_mask = DMA_BIT_MASK(32);
 
-static int __devinit ehci_atmel_drv_probe(struct platform_device *pdev)
+static int ehci_atmel_drv_probe(struct platform_device *pdev)
 {
         struct usb_hcd *hcd;
         const struct hc_driver *driver = &ehci_atmel_hc_driver;
@@ -189,7 +182,7 @@ fail_create_hcd:
         return retval;
 }
 
-static int __devexit ehci_atmel_drv_remove(struct platform_device *pdev)
+static int ehci_atmel_drv_remove(struct platform_device *pdev)
 {
         struct usb_hcd *hcd = platform_get_drvdata(pdev);
 
@@ -214,7 +207,7 @@ MODULE_DEVICE_TABLE(of, atmel_ehci_dt_ids);
 
 static struct platform_driver ehci_atmel_driver = {
         .probe          = ehci_atmel_drv_probe,
-        .remove         = __devexit_p(ehci_atmel_drv_remove),
+        .remove         = ehci_atmel_drv_remove,
         .shutdown       = usb_hcd_platform_shutdown,
         .driver         = {
                 .name   = "atmel-ehci",
diff --git a/drivers/usb/host/ehci-au1xxx.c b/drivers/usb/host/ehci-au1xxx.c
deleted file mode 100644
index 65c945eb4144..000000000000
--- a/drivers/usb/host/ehci-au1xxx.c
+++ /dev/null
@@ -1,184 +0,0 @@
-/*
- * EHCI HCD (Host Controller Driver) for USB.
- *
- * Bus Glue for AMD Alchemy Au1xxx
- *
- * Based on "ohci-au1xxx.c" by Matt Porter <mporter@kernel.crashing.org>
- *
- * Modified for AMD Alchemy Au1200 EHC
- *  by K.Boge <karsten.boge@amd.com>
- *
- * This file is licenced under the GPL.
- */
-
-#include <linux/platform_device.h>
-#include <asm/mach-au1x00/au1000.h>
-
-
-extern int usb_disabled(void);
-
-static int au1xxx_ehci_setup(struct usb_hcd *hcd)
-{
-        struct ehci_hcd *ehci = hcd_to_ehci(hcd);
-        int ret;
-
-        ehci->caps = hcd->regs;
-        ret = ehci_setup(hcd);
-
-        ehci->need_io_watchdog = 0;
-        return ret;
-}
-
-static const struct hc_driver ehci_au1xxx_hc_driver = {
-        .description            = hcd_name,
-        .product_desc           = "Au1xxx EHCI",
-        .hcd_priv_size          = sizeof(struct ehci_hcd),
-
-        /*
-         * generic hardware linkage
-         */
-        .irq                    = ehci_irq,
-        .flags                  = HCD_MEMORY | HCD_USB2,
-
-        /*
-         * basic lifecycle operations
-         *
-         * FIXME -- ehci_init() doesn't do enough here.
-         * See ehci-ppc-soc for a complete implementation.
-         */
-        .reset                  = au1xxx_ehci_setup,
-        .start                  = ehci_run,
-        .stop                   = ehci_stop,
-        .shutdown               = ehci_shutdown,
-
-        /*
-         * managing i/o requests and associated device resources
-         */
-        .urb_enqueue            = ehci_urb_enqueue,
-        .urb_dequeue            = ehci_urb_dequeue,
-        .endpoint_disable       = ehci_endpoint_disable,
-        .endpoint_reset         = ehci_endpoint_reset,
-
-        /*
-         * scheduling support
-         */
-        .get_frame_number       = ehci_get_frame,
-
-        /*
-         * root hub support
-         */
-        .hub_status_data        = ehci_hub_status_data,
-        .hub_control            = ehci_hub_control,
-        .bus_suspend            = ehci_bus_suspend,
-        .bus_resume             = ehci_bus_resume,
-        .relinquish_port        = ehci_relinquish_port,
-        .port_handed_over       = ehci_port_handed_over,
-
-        .clear_tt_buffer_complete       = ehci_clear_tt_buffer_complete,
-};
-
-static int ehci_hcd_au1xxx_drv_probe(struct platform_device *pdev)
-{
-        struct usb_hcd *hcd;
-        struct resource *res;
-        int ret;
-
-        if (usb_disabled())
-                return -ENODEV;
-
-        if (pdev->resource[1].flags != IORESOURCE_IRQ) {
-                pr_debug("resource[1] is not IORESOURCE_IRQ");
-                return -ENOMEM;
-        }
-        hcd = usb_create_hcd(&ehci_au1xxx_hc_driver, &pdev->dev, "Au1xxx");
-        if (!hcd)
-                return -ENOMEM;
-
-        res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-        hcd->rsrc_start = res->start;
-        hcd->rsrc_len = resource_size(res);
-
-        hcd->regs = devm_request_and_ioremap(&pdev->dev, res);
-        if (!hcd->regs) {
-                pr_debug("devm_request_and_ioremap failed");
-                ret = -ENOMEM;
-                goto err1;
-        }
-
-        if (alchemy_usb_control(ALCHEMY_USB_EHCI0, 1)) {
-                printk(KERN_INFO "%s: controller init failed!\n", pdev->name);
-                ret = -ENODEV;
-                goto err1;
-        }
-
-        ret = usb_add_hcd(hcd, pdev->resource[1].start,
-                          IRQF_SHARED);
-        if (ret == 0) {
-                platform_set_drvdata(pdev, hcd);
-                return ret;
-        }
-
-        alchemy_usb_control(ALCHEMY_USB_EHCI0, 0);
-err1:
-        usb_put_hcd(hcd);
-        return ret;
-}
-
-static int ehci_hcd_au1xxx_drv_remove(struct platform_device *pdev)
-{
-        struct usb_hcd *hcd = platform_get_drvdata(pdev);
-
-        usb_remove_hcd(hcd);
-        alchemy_usb_control(ALCHEMY_USB_EHCI0, 0);
-        usb_put_hcd(hcd);
-        platform_set_drvdata(pdev, NULL);
-
-        return 0;
-}
-
-#ifdef CONFIG_PM
-static int ehci_hcd_au1xxx_drv_suspend(struct device *dev)
-{
-        struct usb_hcd *hcd = dev_get_drvdata(dev);
-        bool do_wakeup = device_may_wakeup(dev);
-        int rc;
-
-        rc = ehci_suspend(hcd, do_wakeup);
-        alchemy_usb_control(ALCHEMY_USB_EHCI0, 0);
-
-        return rc;
-}
-
-static int ehci_hcd_au1xxx_drv_resume(struct device *dev)
-{
-        struct usb_hcd *hcd = dev_get_drvdata(dev);
-
-        alchemy_usb_control(ALCHEMY_USB_EHCI0, 1);
-        ehci_resume(hcd, false);
-
-        return 0;
-}
-
-static const struct dev_pm_ops au1xxx_ehci_pmops = {
-        .suspend        = ehci_hcd_au1xxx_drv_suspend,
-        .resume         = ehci_hcd_au1xxx_drv_resume,
-};
-
-#define AU1XXX_EHCI_PMOPS &au1xxx_ehci_pmops
-
-#else
-#define AU1XXX_EHCI_PMOPS NULL
-#endif
-
-static struct platform_driver ehci_hcd_au1xxx_driver = {
-        .probe          = ehci_hcd_au1xxx_drv_probe,
-        .remove         = ehci_hcd_au1xxx_drv_remove,
-        .shutdown       = usb_hcd_platform_shutdown,
-        .driver = {
-                .name   = "au1xxx-ehci",
-                .owner  = THIS_MODULE,
-                .pm     = AU1XXX_EHCI_PMOPS,
-        }
-};
-
-MODULE_ALIAS("platform:au1xxx-ehci");
diff --git a/drivers/usb/host/ehci-cns3xxx.c b/drivers/usb/host/ehci-cns3xxx.c
deleted file mode 100644
index d91708d2e729..000000000000
--- a/drivers/usb/host/ehci-cns3xxx.c
+++ /dev/null
@@ -1,155 +0,0 @@
-/*
- * Copyright 2008 Cavium Networks
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License, Version 2, as
- * published by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-#include <linux/atomic.h>
-#include <mach/cns3xxx.h>
-#include <mach/pm.h>
-
-static int cns3xxx_ehci_init(struct usb_hcd *hcd)
-{
-        struct ehci_hcd *ehci = hcd_to_ehci(hcd);
-        int retval;
-
-        /*
-         * EHCI and OHCI share the same clock and power,
-         * resetting twice would cause the 1st controller been reset.
-         * Therefore only do power up  at the first up device, and
-         * power down at the last down device.
-         *
-         * Set USB AHB INCR length to 16
-         */
-        if (atomic_inc_return(&usb_pwr_ref) == 1) {
-                cns3xxx_pwr_power_up(1 << PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_USB);
-                cns3xxx_pwr_clk_en(1 << PM_CLK_GATE_REG_OFFSET_USB_HOST);
-                cns3xxx_pwr_soft_rst(1 << PM_SOFT_RST_REG_OFFST_USB_HOST);
-                __raw_writel((__raw_readl(MISC_CHIP_CONFIG_REG) | (0X2 << 24)),
-                        MISC_CHIP_CONFIG_REG);
-        }
-
-        ehci->caps = hcd->regs;
-
-        hcd->has_tt = 0;
-
-        retval = ehci_setup(hcd);
-        if (retval)
-                return retval;
-
-        ehci_port_power(ehci, 0);
-
-        return retval;
-}
-
-static const struct hc_driver cns3xxx_ehci_hc_driver = {
-        .description            = hcd_name,
-        .product_desc           = "CNS3XXX EHCI Host Controller",
-        .hcd_priv_size          = sizeof(struct ehci_hcd),
-        .irq                    = ehci_irq,
-        .flags                  = HCD_MEMORY | HCD_USB2,
-        .reset                  = cns3xxx_ehci_init,
-        .start                  = ehci_run,
-        .stop                   = ehci_stop,
-        .shutdown               = ehci_shutdown,
-        .urb_enqueue            = ehci_urb_enqueue,
-        .urb_dequeue            = ehci_urb_dequeue,
-        .endpoint_disable       = ehci_endpoint_disable,
-        .endpoint_reset         = ehci_endpoint_reset,
-        .get_frame_number       = ehci_get_frame,
-        .hub_status_data        = ehci_hub_status_data,
-        .hub_control            = ehci_hub_control,
-#ifdef CONFIG_PM
-        .bus_suspend            = ehci_bus_suspend,
-        .bus_resume             = ehci_bus_resume,
-#endif
-        .relinquish_port        = ehci_relinquish_port,
-        .port_handed_over       = ehci_port_handed_over,
-
-        .clear_tt_buffer_complete       = ehci_clear_tt_buffer_complete,
-};
-
-static int cns3xxx_ehci_probe(struct platform_device *pdev)
-{
-        struct device *dev = &pdev->dev;
-        struct usb_hcd *hcd;
-        const struct hc_driver *driver = &cns3xxx_ehci_hc_driver;
-        struct resource *res;
-        int irq;
-        int retval;
-
-        if (usb_disabled())
-                return -ENODEV;
-
-        res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-        if (!res) {
-                dev_err(dev, "Found HC with no IRQ.\n");
-                return -ENODEV;
-        }
-        irq = res->start;
-
-        hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
-        if (!hcd)
-                return -ENOMEM;
-
-        res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-        if (!res) {
-                dev_err(dev, "Found HC with no register addr.\n");
-                retval = -ENODEV;
-                goto err1;
-        }
-
-        hcd->rsrc_start = res->start;
-        hcd->rsrc_len = resource_size(res);
-
-        hcd->regs = devm_request_and_ioremap(&pdev->dev, res);
-        if (hcd->regs == NULL) {
-                dev_dbg(dev, "error mapping memory\n");
-                retval = -EFAULT;
-                goto err1;
-        }
-
-        retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
-        if (retval == 0)
-                return retval;
-
-err1:
-        usb_put_hcd(hcd);
-
-        return retval;
-}
-
-static int cns3xxx_ehci_remove(struct platform_device *pdev)
-{
-        struct usb_hcd *hcd = platform_get_drvdata(pdev);
-
-        usb_remove_hcd(hcd);
-
-        /*
-         * EHCI and OHCI share the same clock and power,
-         * resetting twice would cause the 1st controller been reset.
-         * Therefore only do power up  at the first up device, and
-         * power down at the last down device.
-         */
-        if (atomic_dec_return(&usb_pwr_ref) == 0)
-                cns3xxx_pwr_clk_dis(1 << PM_CLK_GATE_REG_OFFSET_USB_HOST);
-
-        usb_put_hcd(hcd);
-
-        platform_set_drvdata(pdev, NULL);
-
-        return 0;
-}
-
-MODULE_ALIAS("platform:cns3xxx-ehci");
-
-static struct platform_driver cns3xxx_ehci_driver = {
-        .probe = cns3xxx_ehci_probe,
-        .remove = cns3xxx_ehci_remove,
-        .driver = {
-                .name = "cns3xxx-ehci",
-        },
-};
diff --git a/drivers/usb/host/ehci-dbg.c b/drivers/usb/host/ehci-dbg.c
index 1599806e3d47..70b496dc18a0 100644
--- a/drivers/usb/host/ehci-dbg.c
+++ b/drivers/usb/host/ehci-dbg.c
@@ -18,21 +18,6 @@
 
 /* this file is part of ehci-hcd.c */
 
-#define ehci_dbg(ehci, fmt, args...) \
-        dev_dbg (ehci_to_hcd(ehci)->self.controller , fmt , ## args )
-#define ehci_err(ehci, fmt, args...) \
-        dev_err (ehci_to_hcd(ehci)->self.controller , fmt , ## args )
-#define ehci_info(ehci, fmt, args...) \
-        dev_info (ehci_to_hcd(ehci)->self.controller , fmt , ## args )
-#define ehci_warn(ehci, fmt, args...) \
-        dev_warn (ehci_to_hcd(ehci)->self.controller , fmt , ## args )
-
-#ifdef VERBOSE_DEBUG
-#       define ehci_vdbg ehci_dbg
-#else
-        static inline void ehci_vdbg(struct ehci_hcd *ehci, ...) {}
-#endif
-
 #ifdef  DEBUG
 
 /* check the values in the HCSPARAMS register
@@ -352,11 +337,6 @@ static int debug_async_open(struct inode *, struct file *);
 static int debug_periodic_open(struct inode *, struct file *);
 static int debug_registers_open(struct inode *, struct file *);
 static int debug_async_open(struct inode *, struct file *);
-static ssize_t debug_lpm_read(struct file *file, char __user *user_buf,
-                                   size_t count, loff_t *ppos);
-static ssize_t debug_lpm_write(struct file *file, const char __user *buffer,
-                              size_t count, loff_t *ppos);
-static int debug_lpm_close(struct inode *inode, struct file *file);
 
 static ssize_t debug_output(struct file*, char __user*, size_t, loff_t*);
 static int debug_close(struct inode *, struct file *);
@@ -382,14 +362,6 @@ static const struct file_operations debug_registers_fops = {
         .release        = debug_close,
         .llseek         = default_llseek,
 };
-static const struct file_operations debug_lpm_fops = {
-        .owner          = THIS_MODULE,
-        .open           = simple_open,
-        .read           = debug_lpm_read,
-        .write          = debug_lpm_write,
-        .release        = debug_lpm_close,
-        .llseek         = noop_llseek,
-};
 
 static struct dentry *ehci_debug_root;
 
@@ -971,86 +943,6 @@ static int debug_registers_open(struct inode *inode, struct file *file)
         return file->private_data ? 0 : -ENOMEM;
 }
 
-static int debug_lpm_close(struct inode *inode, struct file *file)
-{
-        return 0;
-}
-
-static ssize_t debug_lpm_read(struct file *file, char __user *user_buf,
-                                   size_t count, loff_t *ppos)
-{
-        /* TODO: show lpm stats */
-        return 0;
-}
-
-static ssize_t debug_lpm_write(struct file *file, const char __user *user_buf,
-                              size_t count, loff_t *ppos)
-{
-        struct usb_hcd          *hcd;
-        struct ehci_hcd         *ehci;
-        char buf[50];
-        size_t len;
-        u32 temp;
-        unsigned long port;
-        u32 __iomem     *portsc ;
-        u32 params;
-
-        hcd = bus_to_hcd(file->private_data);
-        ehci = hcd_to_ehci(hcd);
-
-        len = min(count, sizeof(buf) - 1);
-        if (copy_from_user(buf, user_buf, len))
-                return -EFAULT;
-        buf[len] = '\0';
-        if (len > 0 && buf[len - 1] == '\n')
-                buf[len - 1] = '\0';
-
-        if (strncmp(buf, "enable", 5) == 0) {
-                if (strict_strtoul(buf + 7, 10, &port))
-                        return -EINVAL;
-                params = ehci_readl(ehci, &ehci->caps->hcs_params);
-                if (port > HCS_N_PORTS(params)) {
-                        ehci_dbg(ehci, "ERR: LPM on bad port %lu\n", port);
-                        return -ENODEV;
-                }
-                portsc = &ehci->regs->port_status[port-1];
-                temp = ehci_readl(ehci, portsc);
-                if (!(temp & PORT_DEV_ADDR)) {
-                        ehci_dbg(ehci, "LPM: no device attached\n");
-                        return -ENODEV;
-                }
-                temp |= PORT_LPM;
-                ehci_writel(ehci, temp, portsc);
-                printk(KERN_INFO "force enable LPM for port %lu\n", port);
-        } else if (strncmp(buf, "hird=", 5) == 0) {
-                unsigned long hird;
-                if (strict_strtoul(buf + 5, 16, &hird))
-                        return -EINVAL;
-                printk(KERN_INFO "setting hird %s %lu\n", buf + 6, hird);
-                ehci->command = (ehci->command & ~CMD_HIRD) | (hird << 24);
-                ehci_writel(ehci, ehci->command, &ehci->regs->command);
-        } else if (strncmp(buf, "disable", 7) == 0) {
-                if (strict_strtoul(buf + 8, 10, &port))
-                        return -EINVAL;
-                params = ehci_readl(ehci, &ehci->caps->hcs_params);
-                if (port > HCS_N_PORTS(params)) {
-                        ehci_dbg(ehci, "ERR: LPM off bad port %lu\n", port);
-                        return -ENODEV;
-                }
-                portsc = &ehci->regs->port_status[port-1];
-                temp = ehci_readl(ehci, portsc);
-                if (!(temp & PORT_DEV_ADDR)) {
-                        ehci_dbg(ehci, "ERR: no device attached\n");
-                        return -ENODEV;
-                }
-                temp &= ~PORT_LPM;
-                ehci_writel(ehci, temp, portsc);
-                printk(KERN_INFO "disabled LPM for port %lu\n", port);
-        } else
-                return -EOPNOTSUPP;
-        return count;
-}
-
 static inline void create_debug_files (struct ehci_hcd *ehci)
 {
         struct usb_bus *bus = &ehci_to_hcd(ehci)->self;
@@ -1071,10 +963,6 @@ static inline void create_debug_files (struct ehci_hcd *ehci)
                                                     &debug_registers_fops))
                 goto file_error;
 
-        if (!debugfs_create_file("lpm", S_IRUGO|S_IWUSR, ehci->debug_dir, bus,
-                                                    &debug_lpm_fops))
-                goto file_error;
-
         return;
 
 file_error:
diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
index 0d2f35ca93f1..d81d2fcbff18 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/host/ehci-fsl.c
@@ -230,7 +230,7 @@ static int ehci_fsl_setup_phy(struct usb_hcd *hcd,
 
         switch (phy_mode) {
         case FSL_USB2_PHY_ULPI:
-                if (pdata->controller_ver) {
+                if (pdata->have_sysif_regs && pdata->controller_ver) {
                         /* controller version 1.6 or above */
                         setbits32(non_ehci + FSL_SOC_USB_CTRL,
                                         ULPI_PHY_CLK_SEL);
@@ -251,7 +251,7 @@ static int ehci_fsl_setup_phy(struct usb_hcd *hcd,
                 portsc |= PORT_PTS_PTW;
                 /* fall through */
         case FSL_USB2_PHY_UTMI:
-                if (pdata->controller_ver) {
+                if (pdata->have_sysif_regs && pdata->controller_ver) {
                         /* controller version 1.6 or above */
                         setbits32(non_ehci + FSL_SOC_USB_CTRL, UTMI_PHY_EN);
                         mdelay(FSL_UTMI_PHY_DLY);  /* Delay for UTMI PHY CLK to
@@ -267,7 +267,8 @@ static int ehci_fsl_setup_phy(struct usb_hcd *hcd,
                 break;
         }
 
-        if (pdata->controller_ver && (phy_mode == FSL_USB2_PHY_ULPI)) {
+        if (pdata->have_sysif_regs && pdata->controller_ver &&
+            (phy_mode == FSL_USB2_PHY_ULPI)) {
                 /* check PHY_CLK_VALID to get phy clk valid */
                 if (!spin_event_timeout(in_be32(non_ehci + FSL_SOC_USB_CTRL) &
                                 PHY_CLK_VALID, FSL_USB_PHY_CLK_TIMEOUT, 0)) {
@@ -278,7 +279,7 @@ static int ehci_fsl_setup_phy(struct usb_hcd *hcd,
 
         ehci_writel(ehci, portsc, &ehci->regs->port_status[port_offset]);
 
-        if (phy_mode != FSL_USB2_PHY_ULPI)
+        if (phy_mode != FSL_USB2_PHY_ULPI && pdata->have_sysif_regs)
                 setbits32(non_ehci + FSL_SOC_USB_CTRL, USB_CTRL_USB_EN);
 
         return 0;
@@ -349,7 +350,6 @@ static int ehci_fsl_reinit(struct ehci_hcd *ehci)
 {
         if (ehci_fsl_usb_setup(ehci))
                 return -EINVAL;
-        ehci_port_power(ehci, 0);
 
         return 0;
 }
diff --git a/drivers/usb/host/ehci-grlib.c b/drivers/usb/host/ehci-grlib.c
index 3180cb3624d9..1fc89292f5d6 100644
--- a/drivers/usb/host/ehci-grlib.c
+++ b/drivers/usb/host/ehci-grlib.c
@@ -34,22 +34,6 @@
 
 #define GRUSBHC_HCIVERSION 0x0100 /* Known value of cap. reg. HCIVERSION */
 
-/* called during probe() after chip reset completes */
-static int ehci_grlib_setup(struct usb_hcd *hcd)
-{
-        struct ehci_hcd *ehci = hcd_to_ehci(hcd);
-        int             retval;
-
-        retval = ehci_setup(hcd);
-        if (retval)
-                return retval;
-
-        ehci_port_power(ehci, 1);
-
-        return retval;
-}
-
-
 static const struct hc_driver ehci_grlib_hc_driver = {
         .description            = hcd_name,
         .product_desc           = "GRLIB GRUSBHC EHCI",
@@ -64,7 +48,7 @@ static const struct hc_driver ehci_grlib_hc_driver = {
         /*
          * basic lifecycle operations
          */
-        .reset                  = ehci_grlib_setup,
+        .reset                  = ehci_setup,
         .start                  = ehci_run,
         .stop                   = ehci_stop,
         .shutdown               = ehci_shutdown,
@@ -98,7 +82,7 @@ static const struct hc_driver ehci_grlib_hc_driver = {
 };
 
 
-static int __devinit ehci_hcd_grlib_probe(struct platform_device *op)
+static int ehci_hcd_grlib_probe(struct platform_device *op)
 {
         struct device_node *dn = op->dev.of_node;
         struct usb_hcd *hcd;
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 6bf6c42481e8..c97503bb0b0e 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -39,7 +39,6 @@
 #include <linux/dma-mapping.h>
 #include <linux/debugfs.h>
 #include <linux/slab.h>
-#include <linux/uaccess.h>
 
 #include <asm/byteorder.h>
 #include <asm/io.h>
@@ -108,19 +107,39 @@ static bool ignore_oc = 0;
 module_param (ignore_oc, bool, S_IRUGO);
 MODULE_PARM_DESC (ignore_oc, "ignore bogus hardware overcurrent indications");
 
-/* for link power management(LPM) feature */
-static unsigned int hird;
-module_param(hird, int, S_IRUGO);
-MODULE_PARM_DESC(hird, "host initiated resume duration, +1 for each 75us");
-
 #define INTR_MASK (STS_IAA | STS_FATAL | STS_PCD | STS_ERR | STS_INT)
 
 /*-------------------------------------------------------------------------*/
 
 #include "ehci.h"
-#include "ehci-dbg.c"
 #include "pci-quirks.h"
 
+/*
+ * The MosChip MCS9990 controller updates its microframe counter
+ * a little before the frame counter, and occasionally we will read
+ * the invalid intermediate value.  Avoid problems by checking the
+ * microframe number (the low-order 3 bits); if they are 0 then
+ * re-read the register to get the correct value.
+ */
+static unsigned ehci_moschip_read_frame_index(struct ehci_hcd *ehci)
+{
+        unsigned uf;
+
+        uf = ehci_readl(ehci, &ehci->regs->frame_index);
+        if (unlikely((uf & 7) == 0))
+                uf = ehci_readl(ehci, &ehci->regs->frame_index);
+        return uf;
+}
+
+static inline unsigned ehci_read_frame_index(struct ehci_hcd *ehci)
+{
+        if (ehci->frame_index_bug)
+                return ehci_moschip_read_frame_index(ehci);
+        return ehci_readl(ehci, &ehci->regs->frame_index);
+}
+
+#include "ehci-dbg.c"
+
 /*-------------------------------------------------------------------------*/
 
 /*
@@ -293,7 +312,6 @@ static void end_unlink_intr(struct ehci_hcd *ehci, struct ehci_qh *qh);
 
 #include "ehci-timer.c"
 #include "ehci-hub.c"
-#include "ehci-lpm.c"
 #include "ehci-mem.c"
 #include "ehci-q.c"
 #include "ehci-sched.c"
@@ -353,24 +371,6 @@ static void ehci_shutdown(struct usb_hcd *hcd)
         hrtimer_cancel(&ehci->hrtimer);
 }
 
-static void ehci_port_power (struct ehci_hcd *ehci, int is_on)
-{
-        unsigned port;
-
-        if (!HCS_PPC (ehci->hcs_params))
-                return;
-
-        ehci_dbg (ehci, "...power%s ports...\n", is_on ? "up" : "down");
-        for (port = HCS_N_PORTS (ehci->hcs_params); port > 0; )
-                (void) ehci_hub_control(ehci_to_hcd(ehci),
-                                is_on ? SetPortFeature : ClearPortFeature,
-                                USB_PORT_FEAT_POWER,
-                                port--, NULL, 0);
-        /* Flush those writes */
-        ehci_readl(ehci, &ehci->regs->command);
-        msleep(20);
-}
-
 /*-------------------------------------------------------------------------*/
 
 /*
@@ -503,7 +503,7 @@ static int ehci_init(struct usb_hcd *hcd)
 
         /* controllers may cache some of the periodic schedule ... */
         if (HCC_ISOC_CACHE(hcc_params))         // full frame cache
-                ehci->i_thresh = 2 + 8;
+                ehci->i_thresh = 0;
         else                                    // N microframes cached
                 ehci->i_thresh = 2 + HCC_ISOC_THRES(hcc_params);
 
@@ -555,17 +555,6 @@ static int ehci_init(struct usb_hcd *hcd)
                 temp &= ~(3 << 2);
                 temp |= (EHCI_TUNE_FLS << 2);
         }
-        if (HCC_LPM(hcc_params)) {
-                /* support link power management EHCI 1.1 addendum */
-                ehci_dbg(ehci, "support lpm\n");
-                ehci->has_lpm = 1;
-                if (hird > 0xf) {
-                        ehci_dbg(ehci, "hird %d invalid, use default 0",
-                        hird);
-                        hird = 0;
-                }
-                temp |= hird << 24;
-        }
         ehci->command = temp;
 
         /* Accept arbitrarily long scatter-gather lists */
@@ -660,7 +649,7 @@ static int ehci_run (struct usb_hcd *hcd)
         return 0;
 }
 
-static int ehci_setup(struct usb_hcd *hcd)
+int ehci_setup(struct usb_hcd *hcd)
 {
         struct ehci_hcd *ehci = hcd_to_ehci(hcd);
         int retval;
@@ -691,6 +680,7 @@ static int ehci_setup(struct usb_hcd *hcd)
 
         return 0;
 }
+EXPORT_SYMBOL_GPL(ehci_setup);
 
 /*-------------------------------------------------------------------------*/
 
@@ -1096,7 +1086,7 @@ static int ehci_get_frame (struct usb_hcd *hcd)
 
 /* These routines handle the generic parts of controller suspend/resume */
 
-static int __maybe_unused ehci_suspend(struct usb_hcd *hcd, bool do_wakeup)
+int ehci_suspend(struct usb_hcd *hcd, bool do_wakeup)
 {
         struct ehci_hcd         *ehci = hcd_to_ehci(hcd);
 
@@ -1119,9 +1109,10 @@ static int __maybe_unused ehci_suspend(struct usb_hcd *hcd, bool do_wakeup)
 
         return 0;
 }
+EXPORT_SYMBOL_GPL(ehci_suspend);
 
 /* Returns 0 if power was preserved, 1 if power was lost */
-static int __maybe_unused ehci_resume(struct usb_hcd *hcd, bool hibernated)
+int ehci_resume(struct usb_hcd *hcd, bool hibernated)
 {
         struct ehci_hcd         *ehci = hcd_to_ehci(hcd);
 
@@ -1177,33 +1168,83 @@ static int __maybe_unused ehci_resume(struct usb_hcd *hcd, bool hibernated)
         ehci->rh_state = EHCI_RH_SUSPENDED;
         spin_unlock_irq(&ehci->lock);
 
-        /* here we "know" root ports should always stay powered */
-        ehci_port_power(ehci, 1);
-
         return 1;
 }
+EXPORT_SYMBOL_GPL(ehci_resume);
 
 #endif
 
 /*-------------------------------------------------------------------------*/
 
 /*
- * The EHCI in ChipIdea HDRC cannot be a separate module or device,
- * because its registers (and irq) are shared between host/gadget/otg
- * functions  and in order to facilitate role switching we cannot
- * give the ehci driver exclusive access to those.
+ * Generic structure: This gets copied for platform drivers so that
+ * individual entries can be overridden as needed.
  */
-#ifndef CHIPIDEA_EHCI
+
+static const struct hc_driver ehci_hc_driver = {
+        .description =          hcd_name,
+        .product_desc =         "EHCI Host Controller",
+        .hcd_priv_size =        sizeof(struct ehci_hcd),
+
+        /*
+         * generic hardware linkage
+         */
+        .irq =                  ehci_irq,
+        .flags =                HCD_MEMORY | HCD_USB2,
+
+        /*
+         * basic lifecycle operations
+         */
+        .reset =                ehci_setup,
+        .start =                ehci_run,
+        .stop =                 ehci_stop,
+        .shutdown =             ehci_shutdown,
+
+        /*
+         * managing i/o requests and associated device resources
+         */
+        .urb_enqueue =          ehci_urb_enqueue,
+        .urb_dequeue =          ehci_urb_dequeue,
+        .endpoint_disable =     ehci_endpoint_disable,
+        .endpoint_reset =       ehci_endpoint_reset,
+        .clear_tt_buffer_complete =     ehci_clear_tt_buffer_complete,
+
+        /*
+         * scheduling support
+         */
+        .get_frame_number =     ehci_get_frame,
+
+        /*
+         * root hub support
+         */
+        .hub_status_data =      ehci_hub_status_data,
+        .hub_control =          ehci_hub_control,
+        .bus_suspend =          ehci_bus_suspend,
+        .bus_resume =           ehci_bus_resume,
+        .relinquish_port =      ehci_relinquish_port,
+        .port_handed_over =     ehci_port_handed_over,
+};
+
+void ehci_init_driver(struct hc_driver *drv,
+                const struct ehci_driver_overrides *over)
+{
+        /* Copy the generic table to drv and then apply the overrides */
+        *drv = ehci_hc_driver;
+
+        if (over) {
+                drv->hcd_priv_size += over->extra_priv_size;
+                if (over->reset)
+                        drv->reset = over->reset;
+        }
+}
+EXPORT_SYMBOL_GPL(ehci_init_driver);
+
+/*-------------------------------------------------------------------------*/
 
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_AUTHOR (DRIVER_AUTHOR);
 MODULE_LICENSE ("GPL");
 
-#ifdef CONFIG_PCI
-#include "ehci-pci.c"
-#define PCI_DRIVER              ehci_pci_driver
-#endif
-
 #ifdef CONFIG_USB_EHCI_FSL
 #include "ehci-fsl.c"
 #define PLATFORM_DRIVER         ehci_fsl_driver
@@ -1219,11 +1260,6 @@ MODULE_LICENSE ("GPL");
 #define PLATFORM_DRIVER         ehci_hcd_sh_driver
 #endif
 
-#ifdef CONFIG_MIPS_ALCHEMY
-#include "ehci-au1xxx.c"
-#define PLATFORM_DRIVER         ehci_hcd_au1xxx_driver
-#endif
-
 #ifdef CONFIG_USB_EHCI_HCD_OMAP
 #include "ehci-omap.c"
 #define        PLATFORM_DRIVER         ehci_hcd_omap_driver
@@ -1249,11 +1285,6 @@ MODULE_LICENSE ("GPL");
 #define PLATFORM_DRIVER         ehci_orion_driver
 #endif
 
-#ifdef CONFIG_ARCH_IXP4XX
-#include "ehci-ixp4xx.c"
-#define PLATFORM_DRIVER         ixp4xx_ehci_driver
-#endif
-
 #ifdef CONFIG_USB_W90X900_EHCI
 #include "ehci-w90x900.c"
 #define PLATFORM_DRIVER         ehci_hcd_w90x900_driver
@@ -1269,11 +1300,6 @@ MODULE_LICENSE ("GPL");
 #define PLATFORM_DRIVER         ehci_octeon_driver
 #endif
 
-#ifdef CONFIG_USB_CNS3XXX_EHCI
-#include "ehci-cns3xxx.c"
-#define PLATFORM_DRIVER         cns3xxx_ehci_driver
-#endif
-
 #ifdef CONFIG_ARCH_VT8500
 #include "ehci-vt8500.c"
 #define PLATFORM_DRIVER         vt8500_ehci_driver
@@ -1314,34 +1340,23 @@ MODULE_LICENSE ("GPL");
 #define PLATFORM_DRIVER         ehci_grlib_driver
 #endif
 
-#ifdef CONFIG_CPU_XLR
-#include "ehci-xls.c"
-#define PLATFORM_DRIVER         ehci_xls_driver
-#endif
-
 #ifdef CONFIG_USB_EHCI_MV
 #include "ehci-mv.c"
 #define        PLATFORM_DRIVER         ehci_mv_driver
 #endif
 
-#ifdef CONFIG_MACH_LOONGSON1
-#include "ehci-ls1x.c"
-#define PLATFORM_DRIVER         ehci_ls1x_driver
-#endif
-
 #ifdef CONFIG_MIPS_SEAD3
 #include "ehci-sead3.c"
 #define PLATFORM_DRIVER         ehci_hcd_sead3_driver
 #endif
 
-#ifdef CONFIG_USB_EHCI_HCD_PLATFORM
-#include "ehci-platform.c"
-#define PLATFORM_DRIVER         ehci_platform_driver
-#endif
-
-#if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \
-    !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER) && \
-    !defined(XILINX_OF_PLATFORM_DRIVER)
+#if !IS_ENABLED(CONFIG_USB_EHCI_PCI) && \
+        !IS_ENABLED(CONFIG_USB_EHCI_HCD_PLATFORM) && \
+        !defined(CONFIG_USB_CHIPIDEA_HOST) && \
+        !defined(PLATFORM_DRIVER) && \
+        !defined(PS3_SYSTEM_BUS_DRIVER) && \
+        !defined(OF_PLATFORM_DRIVER) && \
+        !defined(XILINX_OF_PLATFORM_DRIVER)
 #error "missing bus glue for ehci-hcd"
 #endif
 
@@ -1378,12 +1393,6 @@ static int __init ehci_hcd_init(void)
                 goto clean0;
 #endif
 
-#ifdef PCI_DRIVER
-        retval = pci_register_driver(&PCI_DRIVER);
-        if (retval < 0)
-                goto clean1;
-#endif
-
 #ifdef PS3_SYSTEM_BUS_DRIVER
         retval = ps3_ehci_driver_register(&PS3_SYSTEM_BUS_DRIVER);
         if (retval < 0)
@@ -1415,10 +1424,6 @@ clean3:
         ps3_ehci_driver_unregister(&PS3_SYSTEM_BUS_DRIVER);
 clean2:
 #endif
-#ifdef PCI_DRIVER
-        pci_unregister_driver(&PCI_DRIVER);
-clean1:
-#endif
 #ifdef PLATFORM_DRIVER
         platform_driver_unregister(&PLATFORM_DRIVER);
 clean0:
@@ -1444,9 +1449,6 @@ static void __exit ehci_hcd_cleanup(void)
 #ifdef PLATFORM_DRIVER
         platform_driver_unregister(&PLATFORM_DRIVER);
 #endif
-#ifdef PCI_DRIVER
-        pci_unregister_driver(&PCI_DRIVER);
-#endif
 #ifdef PS3_SYSTEM_BUS_DRIVER
         ps3_ehci_driver_unregister(&PS3_SYSTEM_BUS_DRIVER);
 #endif
@@ -1456,5 +1458,3 @@ static void __exit ehci_hcd_cleanup(void)
         clear_bit(USB_EHCI_LOADED, &usb_hcds_loaded);
 }
 module_exit(ehci_hcd_cleanup);
-
-#endif /* CHIPIDEA_EHCI */
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index 914ce9370e70..4ccb97c0678f 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -56,6 +56,19 @@ static void ehci_handover_companion_ports(struct ehci_hcd *ehci)
         if (!ehci->owned_ports)
                 return;
 
+        /* Make sure the ports are powered */
+        port = HCS_N_PORTS(ehci->hcs_params);
+        while (port--) {
+                if (test_bit(port, &ehci->owned_ports)) {
+                        reg = &ehci->regs->port_status[port];
+                        status = ehci_readl(ehci, reg) & ~PORT_RWC_BITS;
+                        if (!(status & PORT_POWER)) {
+                                status |= PORT_POWER;
+                                ehci_writel(ehci, status, reg);
+                        }
+                }
+        }
+
         /* Give the connections some time to appear */
         msleep(20);
 
@@ -384,11 +397,24 @@ static int ehci_bus_resume (struct usb_hcd *hcd)
         ehci_writel(ehci, ehci->command, &ehci->regs->command);
         ehci->rh_state = EHCI_RH_RUNNING;
 
-        /* Some controller/firmware combinations need a delay during which
-         * they set up the port statuses.  See Bugzilla #8190. */
-        spin_unlock_irq(&ehci->lock);
-        msleep(8);
-        spin_lock_irq(&ehci->lock);
+        /*
+         * According to Bugzilla #8190, the port status for some controllers
+         * will be wrong without a delay. At their wrong status, the port
+         * is enabled, but not suspended neither resumed.
+         */
+        i = HCS_N_PORTS(ehci->hcs_params);
+        while (i--) {
+                temp = ehci_readl(ehci, &ehci->regs->port_status[i]);
+                if ((temp & PORT_PE) &&
+                                !(temp & (PORT_SUSPEND | PORT_RESUME))) {
+                        ehci_dbg(ehci, "Port status(0x%x) is wrong\n", temp);
+                        spin_unlock_irq(&ehci->lock);
+                        msleep(8);
+                        spin_lock_irq(&ehci->lock);
+                        break;
+                }
+        }
+
         if (ehci->shutdown)
                 goto shutdown;
 
@@ -764,11 +790,6 @@ static int ehci_hub_control (
                                                 status_reg);
                         break;
                 case USB_PORT_FEAT_C_CONNECTION:
-                        if (ehci->has_lpm) {
-                                /* clear PORTSC bits on disconnect */
-                                temp &= ~PORT_LPM;
-                                temp &= ~PORT_DEV_ADDR;
-                        }
                         ehci_writel(ehci, temp | PORT_CSC, status_reg);
                         break;
                 case USB_PORT_FEAT_C_OVER_CURRENT:
@@ -1088,8 +1109,7 @@ error_exit:
         return retval;
 }
 
-static void __maybe_unused ehci_relinquish_port(struct usb_hcd *hcd,
-                int portnum)
+static void ehci_relinquish_port(struct usb_hcd *hcd, int portnum)
 {
         struct ehci_hcd         *ehci = hcd_to_ehci(hcd);
 
@@ -1098,8 +1118,7 @@ static void __maybe_unused ehci_relinquish_port(struct usb_hcd *hcd,
         set_owner(ehci, --portnum, PORT_OWNER);
 }
 
-static int __maybe_unused ehci_port_handed_over(struct usb_hcd *hcd,
-                int portnum)
+static int ehci_port_handed_over(struct usb_hcd *hcd, int portnum)
 {
         struct ehci_hcd         *ehci = hcd_to_ehci(hcd);
         u32 __iomem             *reg;
diff --git a/drivers/usb/host/ehci-ixp4xx.c b/drivers/usb/host/ehci-ixp4xx.c
deleted file mode 100644
index f224c0a48bed..000000000000
--- a/drivers/usb/host/ehci-ixp4xx.c
+++ /dev/null
@@ -1,139 +0,0 @@
-/*
- * IXP4XX EHCI Host Controller Driver
- *
- * Author: Vladimir Barinov <vbarinov@embeddedalley.com>
- *
- * Based on "ehci-fsl.c" by Randy Vinson <rvinson@mvista.com>
- *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/platform_device.h>
-
-static int ixp4xx_ehci_init(struct usb_hcd *hcd)
-{
-        struct ehci_hcd *ehci = hcd_to_ehci(hcd);
-        int retval = 0;
-
-        ehci->big_endian_desc = 1;
-        ehci->big_endian_mmio = 1;
-
-        ehci->caps = hcd->regs + 0x100;
-
-        hcd->has_tt = 1;
-
-        retval = ehci_setup(hcd);
-        if (retval)
-                return retval;
-
-        ehci_port_power(ehci, 0);
-
-        return retval;
-}
-
-static const struct hc_driver ixp4xx_ehci_hc_driver = {
-        .description            = hcd_name,
-        .product_desc           = "IXP4XX EHCI Host Controller",
-        .hcd_priv_size          = sizeof(struct ehci_hcd),
-        .irq                    = ehci_irq,
-        .flags                  = HCD_MEMORY | HCD_USB2,
-        .reset                  = ixp4xx_ehci_init,
-        .start                  = ehci_run,
-        .stop                   = ehci_stop,
-        .shutdown               = ehci_shutdown,
-        .urb_enqueue            = ehci_urb_enqueue,
-        .urb_dequeue            = ehci_urb_dequeue,
-        .endpoint_disable       = ehci_endpoint_disable,
-        .endpoint_reset         = ehci_endpoint_reset,
-        .get_frame_number       = ehci_get_frame,
-        .hub_status_data        = ehci_hub_status_data,
-        .hub_control            = ehci_hub_control,
-#if defined(CONFIG_PM)
-        .bus_suspend            = ehci_bus_suspend,
-        .bus_resume             = ehci_bus_resume,
-#endif
-        .relinquish_port        = ehci_relinquish_port,
-        .port_handed_over       = ehci_port_handed_over,
-
-        .clear_tt_buffer_complete       = ehci_clear_tt_buffer_complete,
-};
-
-static int ixp4xx_ehci_probe(struct platform_device *pdev)
-{
-        struct usb_hcd *hcd;
-        const struct hc_driver *driver = &ixp4xx_ehci_hc_driver;
-        struct resource *res;
-        int irq;
-        int retval;
-
-        if (usb_disabled())
-                return -ENODEV;
-
-        res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-        if (!res) {
-                dev_err(&pdev->dev,
-                        "Found HC with no IRQ. Check %s setup!\n",
-                        dev_name(&pdev->dev));
-                return -ENODEV;
-        }
-        irq = res->start;
-
-        hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
-        if (!hcd) {
-                retval = -ENOMEM;
-                goto fail_create_hcd;
-        }
-
-        res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-        if (!res) {
-                dev_err(&pdev->dev,
-                        "Found HC with no register addr. Check %s setup!\n",
-                        dev_name(&pdev->dev));
-                retval = -ENODEV;
-                goto fail_request_resource;
-        }
-        hcd->rsrc_start = res->start;
-        hcd->rsrc_len = resource_size(res);
-
-        hcd->regs = devm_request_and_ioremap(&pdev->dev, res);
-        if (hcd->regs == NULL) {
-                dev_dbg(&pdev->dev, "error mapping memory\n");
-                retval = -EFAULT;
-                goto fail_request_resource;
-        }
-
-        retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
-        if (retval)
-                goto fail_request_resource;
-
-        return retval;
-
-fail_request_resource:
-        usb_put_hcd(hcd);
-fail_create_hcd:
-        dev_err(&pdev->dev, "init %s fail, %d\n", dev_name(&pdev->dev), retval);
-        return retval;
-}
-
-static int ixp4xx_ehci_remove(struct platform_device *pdev)
-{
-        struct usb_hcd *hcd = platform_get_drvdata(pdev);
-
-        usb_remove_hcd(hcd);
-        usb_put_hcd(hcd);
-
-        return 0;
-}
-
-MODULE_ALIAS("platform:ixp4xx-ehci");
-
-static struct platform_driver ixp4xx_ehci_driver = {
-        .probe = ixp4xx_ehci_probe,
-        .remove = ixp4xx_ehci_remove,
-        .driver = {
-                .name = "ixp4xx-ehci",
-        },
-};
diff --git a/drivers/usb/host/ehci-lpm.c b/drivers/usb/host/ehci-lpm.c
deleted file mode 100644
index 2111627a19de..000000000000
--- a/drivers/usb/host/ehci-lpm.c
+++ /dev/null
@@ -1,84 +0,0 @@
-/* ehci-lpm.c EHCI HCD LPM support code
- * Copyright (c) 2008 - 2010,  Intel Corporation.
- * Author: Jacob Pan <jacob.jun.pan@intel.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-/* this file is part of ehci-hcd.c */
-static int __maybe_unused ehci_lpm_set_da(struct ehci_hcd *ehci,
-        int dev_addr, int port_num)
-{
-        u32 __iomem portsc;
-
-        ehci_dbg(ehci, "set dev address %d for port %d\n", dev_addr, port_num);
-        if (port_num > HCS_N_PORTS(ehci->hcs_params)) {
-                ehci_dbg(ehci, "invalid port number %d\n", port_num);
-                return -ENODEV;
-        }
-        portsc = ehci_readl(ehci, &ehci->regs->port_status[port_num-1]);
-        portsc &= ~PORT_DEV_ADDR;
-        portsc |= dev_addr<<25;
-        ehci_writel(ehci, portsc, &ehci->regs->port_status[port_num-1]);
-        return 0;
-}
-
-/*
- * this function is used to check if the device support LPM
- * if yes, mark the PORTSC register with PORT_LPM bit
- */
-static int __maybe_unused ehci_lpm_check(struct ehci_hcd *ehci, int port)
-{
-        u32 __iomem     *portsc ;
-        u32 val32;
-        int retval;
-
-        portsc = &ehci->regs->port_status[port-1];
-        val32 = ehci_readl(ehci, portsc);
-        if (!(val32 & PORT_DEV_ADDR)) {
-                ehci_dbg(ehci, "LPM: no device attached\n");
-                return -ENODEV;
-        }
-        val32 |= PORT_LPM;
-        ehci_writel(ehci, val32, portsc);
-        msleep(5);
-        val32 |= PORT_SUSPEND;
-        ehci_dbg(ehci, "Sending LPM 0x%08x to port %d\n", val32, port);
-        ehci_writel(ehci, val32, portsc);
-        /* wait for ACK */
-        msleep(10);
-        retval = handshake(ehci, &ehci->regs->port_status[port-1], PORT_SSTS,
-                        PORTSC_SUSPEND_STS_ACK, 125);
-        dbg_port(ehci, "LPM", port, val32);
-        if (retval != -ETIMEDOUT) {
-                ehci_dbg(ehci, "LPM: device ACK for LPM\n");
-                val32 |= PORT_LPM;
-                /*
-                 * now device should be in L1 sleep, let's wake up the device
-                 * so that we can complete enumeration.
-                 */
-                ehci_writel(ehci, val32, portsc);
-                msleep(10);
-                val32 |= PORT_RESUME;
-                ehci_writel(ehci, val32, portsc);
-        } else {
-                ehci_dbg(ehci, "LPM: device does not ACK, disable LPM %d\n",
-                        retval);
-                val32 &= ~PORT_LPM;
-                retval = -ETIMEDOUT;
-                ehci_writel(ehci, val32, portsc);
-        }
-
-        return retval;
-}
diff --git a/drivers/usb/host/ehci-ls1x.c b/drivers/usb/host/ehci-ls1x.c
deleted file mode 100644
index aa0f328922df..000000000000
--- a/drivers/usb/host/ehci-ls1x.c
+++ /dev/null
@@ -1,147 +0,0 @@
-/*
- *  Bus Glue for Loongson LS1X built-in EHCI controller.
- *
- *  Copyright (c) 2012 Zhang, Keguang <keguang.zhang@gmail.com>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- */
-
-
-#include <linux/platform_device.h>
-
-static int ehci_ls1x_reset(struct usb_hcd *hcd)
-{
-        struct ehci_hcd *ehci = hcd_to_ehci(hcd);
-        int ret;
-
-        ehci->caps = hcd->regs;
-
-        ret = ehci_setup(hcd);
-        if (ret)
-                return ret;
-
-        ehci_port_power(ehci, 0);
-
-        return 0;
-}
-
-static const struct hc_driver ehci_ls1x_hc_driver = {
-        .description            = hcd_name,
-        .product_desc           = "LOONGSON1 EHCI",
-        .hcd_priv_size          = sizeof(struct ehci_hcd),
-
-        /*
-         * generic hardware linkage
-         */
-        .irq                    = ehci_irq,
-        .flags                  = HCD_MEMORY | HCD_USB2,
-
-        /*
-         * basic lifecycle operations
-         */
-        .reset                  = ehci_ls1x_reset,
-        .start                  = ehci_run,
-        .stop                   = ehci_stop,
-        .shutdown               = ehci_shutdown,
-
-        /*
-         * managing i/o requests and associated device resources
-         */
-        .urb_enqueue            = ehci_urb_enqueue,
-        .urb_dequeue            = ehci_urb_dequeue,
-        .endpoint_disable       = ehci_endpoint_disable,
-        .endpoint_reset         = ehci_endpoint_reset,
-
-        /*
-         * scheduling support
-         */
-        .get_frame_number       = ehci_get_frame,
-
-        /*
-         * root hub support
-         */
-        .hub_status_data        = ehci_hub_status_data,
-        .hub_control            = ehci_hub_control,
-        .relinquish_port        = ehci_relinquish_port,
-        .port_handed_over       = ehci_port_handed_over,
-
-        .clear_tt_buffer_complete       = ehci_clear_tt_buffer_complete,
-};
-
-static int ehci_hcd_ls1x_probe(struct platform_device *pdev)
-{
-        struct usb_hcd *hcd;
-        struct resource *res;
-        int irq;
-        int ret;
-
-        pr_debug("initializing loongson1 ehci USB Controller\n");
-
-        if (usb_disabled())
-                return -ENODEV;
-
-        res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-        if (!res) {
-                dev_err(&pdev->dev,
-                        "Found HC with no IRQ. Check %s setup!\n",
-                        dev_name(&pdev->dev));
-                return -ENODEV;
-        }
-        irq = res->start;
-
-        res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-        if (!res) {
-                dev_err(&pdev->dev,
-                        "Found HC with no register addr. Check %s setup!\n",
-                        dev_name(&pdev->dev));
-                return -ENODEV;
-        }
-
-        hcd = usb_create_hcd(&ehci_ls1x_hc_driver, &pdev->dev,
-                                dev_name(&pdev->dev));
-        if (!hcd)
-                return -ENOMEM;
-        hcd->rsrc_start = res->start;
-        hcd->rsrc_len   = resource_size(res);
-
-        hcd->regs = devm_request_and_ioremap(&pdev->dev, res);
-        if (hcd->regs == NULL) {
-                dev_dbg(&pdev->dev, "error mapping memory\n");
-                ret = -EFAULT;
-                goto err_put_hcd;
-        }
-
-        ret = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED);
-        if (ret)
-                goto err_put_hcd;
-
-        return ret;
-
-err_put_hcd:
-        usb_put_hcd(hcd);
-        return ret;
-}
-
-static int ehci_hcd_ls1x_remove(struct platform_device *pdev)
-{
-        struct usb_hcd *hcd = platform_get_drvdata(pdev);
-
-        usb_remove_hcd(hcd);
-        usb_put_hcd(hcd);
-
-        return 0;
-}
-
-static struct platform_driver ehci_ls1x_driver = {
-        .probe = ehci_hcd_ls1x_probe,
-        .remove = ehci_hcd_ls1x_remove,
-        .shutdown = usb_hcd_platform_shutdown,
-        .driver = {
-                .name = "ls1x-ehci",
-                .owner  = THIS_MODULE,
-        },
-};
-
-MODULE_ALIAS(PLATFORM_MODULE_PREFIX "ls1x-ehci");
diff --git a/drivers/usb/host/ehci-msm.c b/drivers/usb/host/ehci-msm.c
index 4af4dc5b618c..88a49c87e748 100644
--- a/drivers/usb/host/ehci-msm.c
+++ b/drivers/usb/host/ehci-msm.c
@@ -53,7 +53,6 @@ static int ehci_msm_reset(struct usb_hcd *hcd)
         /* Disable streaming mode and select host mode */
         writel(0x13, USB_USBMODE);
 
-        ehci_port_power(ehci, 1);
         return 0;
 }
 
@@ -174,7 +173,7 @@ put_hcd:
         return ret;
 }
 
-static int __devexit ehci_msm_remove(struct platform_device *pdev)
+static int ehci_msm_remove(struct platform_device *pdev)
 {
         struct usb_hcd *hcd = platform_get_drvdata(pdev);
 
@@ -221,7 +220,7 @@ static const struct dev_pm_ops ehci_msm_dev_pm_ops = {
 
 static struct platform_driver ehci_msm_driver = {
         .probe  = ehci_msm_probe,
-        .remove = __devexit_p(ehci_msm_remove),
+        .remove = ehci_msm_remove,
         .driver = {
                    .name = "msm_hsusb_host",
                    .pm = &ehci_msm_dev_pm_ops,
diff --git a/drivers/usb/host/ehci-mv.c b/drivers/usb/host/ehci-mv.c
index f7bfc0b898b9..6c56297ea16b 100644
--- a/drivers/usb/host/ehci-mv.c
+++ b/drivers/usb/host/ehci-mv.c
@@ -43,7 +43,7 @@ static void ehci_clock_enable(struct ehci_hcd_mv *ehci_mv)
         unsigned int i;
 
         for (i = 0; i < ehci_mv->clknum; i++)
-                clk_enable(ehci_mv->clk[i]);
+                clk_prepare_enable(ehci_mv->clk[i]);
 }
 
 static void ehci_clock_disable(struct ehci_hcd_mv *ehci_mv)
@@ -51,7 +51,7 @@ static void ehci_clock_disable(struct ehci_hcd_mv *ehci_mv)
         unsigned int i;
 
         for (i = 0; i < ehci_mv->clknum; i++)
-                clk_disable(ehci_mv->clk[i]);
+                clk_disable_unprepare(ehci_mv->clk[i]);
 }
 
 static int mv_ehci_enable(struct ehci_hcd_mv *ehci_mv)
diff --git a/drivers/usb/host/ehci-mxc.c b/drivers/usb/host/ehci-mxc.c
index 4a08fc0b27c9..ec7f5d2c90de 100644
--- a/drivers/usb/host/ehci-mxc.c
+++ b/drivers/usb/host/ehci-mxc.c
@@ -24,7 +24,6 @@
 #include <linux/usb/ulpi.h>
 #include <linux/slab.h>
 
-#include <mach/hardware.h>
 #include <linux/platform_data/usb-ehci-mxc.h>
 
 #include <asm/mach-types.h>
@@ -39,17 +38,9 @@ struct ehci_mxc_priv {
 /* called during probe() after chip reset completes */
 static int ehci_mxc_setup(struct usb_hcd *hcd)
 {
-        struct ehci_hcd *ehci = hcd_to_ehci(hcd);
-        int retval;
-
         hcd->has_tt = 1;
 
-        retval = ehci_setup(hcd);
-        if (retval)
-                return retval;
-
-        ehci_port_power(ehci, 0);
-        return 0;
+        return ehci_setup(hcd);
 }
 
 static const struct hc_driver ehci_mxc_hc_driver = {
diff --git a/drivers/usb/host/ehci-octeon.c b/drivers/usb/host/ehci-octeon.c
index ba26957abf46..a89750fff4ff 100644
--- a/drivers/usb/host/ehci-octeon.c
+++ b/drivers/usb/host/ehci-octeon.c
@@ -159,9 +159,6 @@ static int ehci_octeon_drv_probe(struct platform_device *pdev)
 
         platform_set_drvdata(pdev, hcd);
 
-        /* root ports should always stay powered */
-        ehci_port_power(ehci, 1);
-
         return 0;
 err3:
         ehci_octeon_stop();
diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c
index d7fe287d0678..ac17a7c3a0cd 100644
--- a/drivers/usb/host/ehci-omap.c
+++ b/drivers/usb/host/ehci-omap.c
@@ -39,12 +39,13 @@
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 #include <linux/usb/ulpi.h>
-#include <plat/usb.h>
 #include <linux/regulator/consumer.h>
 #include <linux/pm_runtime.h>
 #include <linux/gpio.h>
 #include <linux/clk.h>
 
+#include <linux/platform_data/usb-omap.h>
+
 /* EHCI Register Set */
 #define EHCI_INSNREG04                                  (0xA0)
 #define EHCI_INSNREG04_DISABLE_UNSUSPEND                (1 << 5)
@@ -146,9 +147,6 @@ static int omap_ehci_init(struct usb_hcd *hcd)
                         gpio_set_value_cansleep(pdata->reset_gpio_port[1], 1);
         }
 
-        /* root ports should always stay powered */
-        ehci_port_power(ehci, 1);
-
         return rc;
 }
 
diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c
index 9c2717d66730..914a3ecfb5d3 100644
--- a/drivers/usb/host/ehci-orion.c
+++ b/drivers/usb/host/ehci-orion.c
@@ -14,6 +14,9 @@
 #include <linux/mbus.h>
 #include <linux/clk.h>
 #include <linux/platform_data/usb-ehci-orion.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_irq.h>
 
 #define rdl(off)        __raw_readl(hcd->regs + (off))
 #define wrl(off, val)   __raw_writel((val), hcd->regs + (off))
@@ -101,20 +104,6 @@ static void orion_usb_phy_v1_setup(struct usb_hcd *hcd)
         wrl(USB_MODE, 0x13);
 }
 
-static int ehci_orion_setup(struct usb_hcd *hcd)
-{
-        struct ehci_hcd *ehci = hcd_to_ehci(hcd);
-        int retval;
-
-        retval = ehci_setup(hcd);
-        if (retval)
-                return retval;
-
-        ehci_port_power(ehci, 0);
-
-        return retval;
-}
-
 static const struct hc_driver ehci_orion_hc_driver = {
         .description = hcd_name,
         .product_desc = "Marvell Orion EHCI",
@@ -129,7 +118,7 @@ static const struct hc_driver ehci_orion_hc_driver = {
         /*
          * basic lifecycle operations
          */
-        .reset = ehci_orion_setup,
+        .reset = ehci_setup,
         .start = ehci_run,
         .stop = ehci_stop,
         .shutdown = ehci_shutdown,
@@ -160,7 +149,7 @@ static const struct hc_driver ehci_orion_hc_driver = {
         .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
 };
 
-static void __devinit
+static void
 ehci_orion_conf_mbus_windows(struct usb_hcd *hcd,
                              const struct mbus_dram_target_info *dram)
 {
@@ -181,7 +170,9 @@ ehci_orion_conf_mbus_windows(struct usb_hcd *hcd,
         }
 }
 
-static int __devinit ehci_orion_drv_probe(struct platform_device *pdev)
+static u64 ehci_orion_dma_mask = DMA_BIT_MASK(32);
+
+static int ehci_orion_drv_probe(struct platform_device *pdev)
 {
         struct orion_ehci_data *pd = pdev->dev.platform_data;
         const struct mbus_dram_target_info *dram;
@@ -191,13 +182,17 @@ static int __devinit ehci_orion_drv_probe(struct platform_device *pdev)
         struct clk *clk;
         void __iomem *regs;
         int irq, err;
+        enum orion_ehci_phy_ver phy_version;
 
         if (usb_disabled())
                 return -ENODEV;
 
         pr_debug("Initializing Orion-SoC USB Host Controller\n");
 
-        irq = platform_get_irq(pdev, 0);
+        if (pdev->dev.of_node)
+                irq = irq_of_parse_and_map(pdev->dev.of_node, 0);
+        else
+                irq = platform_get_irq(pdev, 0);
         if (irq <= 0) {
                 dev_err(&pdev->dev,
                         "Found HC with no IRQ. Check %s setup!\n",
@@ -215,6 +210,14 @@ static int __devinit ehci_orion_drv_probe(struct platform_device *pdev)
                 goto err1;
         }
 
+        /*
+         * Right now device-tree probed devices don't get dma_mask
+         * set. Since shared usb code relies on it, set it here for
+         * now. Once we have dma capability bindings this can go away.
+         */
+        if (!pdev->dev.dma_mask)
+                pdev->dev.dma_mask = &ehci_orion_dma_mask;
+
         if (!request_mem_region(res->start, resource_size(res),
                                 ehci_orion_hc_driver.description)) {
                 dev_dbg(&pdev->dev, "controller already in use\n");
@@ -262,7 +265,12 @@ static int __devinit ehci_orion_drv_probe(struct platform_device *pdev)
         /*
          * setup Orion USB controller.
          */
-        switch (pd->phy_version) {
+        if (pdev->dev.of_node)
+                phy_version = EHCI_PHY_NA;
+        else
+                phy_version = pd->phy_version;
+
+        switch (phy_version) {
         case EHCI_PHY_NA:       /* dont change USB phy settings */
                 break;
         case EHCI_PHY_ORION:
@@ -317,9 +325,19 @@ static int __exit ehci_orion_drv_remove(struct platform_device *pdev)
 
 MODULE_ALIAS("platform:orion-ehci");
 
+static const struct of_device_id ehci_orion_dt_ids[] = {
+        { .compatible = "marvell,orion-ehci", },
+        {},
+};
+MODULE_DEVICE_TABLE(of, ehci_orion_dt_ids);
+
 static struct platform_driver ehci_orion_driver = {
         .probe          = ehci_orion_drv_probe,
         .remove         = __exit_p(ehci_orion_drv_remove),
         .shutdown       = usb_hcd_platform_shutdown,
-        .driver.name    = "orion-ehci",
+        .driver = {
+                .name   = "orion-ehci",
+                .owner  = THIS_MODULE,
+                .of_match_table = of_match_ptr(ehci_orion_dt_ids),
+        },
 };
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index 2cb7d370c4ef..170b9399e09f 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -18,9 +18,18 @@
  * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
-#ifndef CONFIG_PCI
-#error "This file is PCI bus glue.  CONFIG_PCI must be defined."
-#endif
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+
+#include "ehci.h"
+#include "pci-quirks.h"
+
+#define DRIVER_DESC "EHCI PCI platform driver"
+
+static const char hcd_name[] = "ehci-pci";
 
 /* defined here to avoid adding to pci_ids.h for single instance use */
 #define PCI_DEVICE_ID_INTEL_CE4100_USB  0x2e70
@@ -103,7 +112,6 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
                 }
                 break;
         case PCI_VENDOR_ID_INTEL:
-                ehci->fs_i_thresh = 1;
                 if (pdev->device == PCI_DEVICE_ID_INTEL_CE4100_USB)
                         hcd->has_tt = 1;
                 break;
@@ -192,6 +200,26 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
                 break;
         }
 
+        /* optional debug port, normally in the first BAR */
+        temp = pci_find_capability(pdev, PCI_CAP_ID_DBG);
+        if (temp) {
+                pci_read_config_dword(pdev, temp, &temp);
+                temp >>= 16;
+                if (((temp >> 13) & 7) == 1) {
+                        u32 hcs_params = ehci_readl(ehci,
+                                                    &ehci->caps->hcs_params);
+
+                        temp &= 0x1fff;
+                        ehci->debug = hcd->regs + temp;
+                        temp = ehci_readl(ehci, &ehci->debug->control);
+                        ehci_info(ehci, "debug port %d%s\n",
+                                  HCS_DEBUG_PORT(hcs_params),
+                                  (temp & DBGP_ENABLED) ? " IN USE" : "");
+                        if (!(temp & DBGP_ENABLED))
+                                ehci->debug = NULL;
+                }
+        }
+
         retval = ehci_setup(hcd);
         if (retval)
                 return retval;
@@ -203,11 +231,6 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
                 break;
         case PCI_VENDOR_ID_INTEL:
                 ehci->need_io_watchdog = 0;
-                if (pdev->device == 0x0806 || pdev->device == 0x0811
-                                || pdev->device == 0x0829) {
-                        ehci_info(ehci, "disable lpm for langwell/penwell\n");
-                        ehci->has_lpm = 0;
-                }
                 break;
         case PCI_VENDOR_ID_NVIDIA:
                 switch (pdev->device) {
@@ -217,8 +240,7 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
                  * devices with PPCD enabled.
                  */
                 case 0x0d9d:
-                        ehci_info(ehci, "disable lpm/ppcd for nvidia mcp89");
-                        ehci->has_lpm = 0;
+                        ehci_info(ehci, "disable ppcd for nvidia mcp89\n");
                         ehci->has_ppcd = 0;
                         ehci->command &= ~CMD_PPCEE;
                         break;
@@ -226,25 +248,6 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
                 break;
         }
 
-        /* optional debug port, normally in the first BAR */
-        temp = pci_find_capability(pdev, 0x0a);
-        if (temp) {
-                pci_read_config_dword(pdev, temp, &temp);
-                temp >>= 16;
-                if ((temp & (3 << 13)) == (1 << 13)) {
-                        temp &= 0x1fff;
-                        ehci->debug = hcd->regs + temp;
-                        temp = ehci_readl(ehci, &ehci->debug->control);
-                        ehci_info(ehci, "debug port %d%s\n",
-                                HCS_DEBUG_PORT(ehci->hcs_params),
-                                (temp & DBGP_ENABLED)
-                                        ? " IN USE"
-                                        : "");
-                        if (!(temp & DBGP_ENABLED))
-                                ehci->debug = NULL;
-                }
-        }
-
         /* at least the Genesys GL880S needs fixup here */
         temp = HCS_N_CC(ehci->hcs_params) * HCS_N_PCC(ehci->hcs_params);
         temp &= 0x0f;
@@ -304,7 +307,6 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
                 ehci_warn(ehci, "selective suspend/wakeup unavailable\n");
 #endif
 
-        ehci_port_power(ehci, 1);
         retval = ehci_pci_reinit(ehci, pdev);
 done:
         return retval;
@@ -323,18 +325,14 @@ done:
  * Also they depend on separate root hub suspend/resume.
  */
 
-static int ehci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
-{
-        return ehci_suspend(hcd, do_wakeup);
-}
-
 static bool usb_is_intel_switchable_ehci(struct pci_dev *pdev)
 {
         return pdev->class == PCI_CLASS_SERIAL_USB_EHCI &&
                 pdev->vendor == PCI_VENDOR_ID_INTEL &&
                 (pdev->device == 0x1E26 ||
                  pdev->device == 0x8C2D ||
-                 pdev->device == 0x8C26);
+                 pdev->device == 0x8C26 ||
+                 pdev->device == 0x9C26);
 }
 
 static void ehci_enable_xhci_companion(void)
@@ -378,76 +376,17 @@ static int ehci_pci_resume(struct usb_hcd *hcd, bool hibernated)
                 (void) ehci_pci_reinit(ehci, pdev);
         return 0;
 }
-#endif
 
-static int ehci_update_device(struct usb_hcd *hcd, struct usb_device *udev)
-{
-        struct ehci_hcd *ehci = hcd_to_ehci(hcd);
-        int rc = 0;
-
-        if (!udev->parent) /* udev is root hub itself, impossible */
-                rc = -1;
-        /* we only support lpm device connected to root hub yet */
-        if (ehci->has_lpm && !udev->parent->parent) {
-                rc = ehci_lpm_set_da(ehci, udev->devnum, udev->portnum);
-                if (!rc)
-                        rc = ehci_lpm_check(ehci, udev->portnum);
-        }
-        return rc;
-}
+#else
 
-static const struct hc_driver ehci_pci_hc_driver = {
-        .description =          hcd_name,
-        .product_desc =         "EHCI Host Controller",
-        .hcd_priv_size =        sizeof(struct ehci_hcd),
+#define ehci_suspend            NULL
+#define ehci_pci_resume         NULL
+#endif  /* CONFIG_PM */
 
-        /*
-         * generic hardware linkage
-         */
-        .irq =                  ehci_irq,
-        .flags =                HCD_MEMORY | HCD_USB2,
+static struct hc_driver __read_mostly ehci_pci_hc_driver;
 
-        /*
-         * basic lifecycle operations
-         */
+static const struct ehci_driver_overrides pci_overrides __initdata = {
         .reset =                ehci_pci_setup,
-        .start =                ehci_run,
-#ifdef  CONFIG_PM
-        .pci_suspend =          ehci_pci_suspend,
-        .pci_resume =           ehci_pci_resume,
-#endif
-        .stop =                 ehci_stop,
-        .shutdown =             ehci_shutdown,
-
-        /*
-         * managing i/o requests and associated device resources
-         */
-        .urb_enqueue =          ehci_urb_enqueue,
-        .urb_dequeue =          ehci_urb_dequeue,
-        .endpoint_disable =     ehci_endpoint_disable,
-        .endpoint_reset =       ehci_endpoint_reset,
-
-        /*
-         * scheduling support
-         */
-        .get_frame_number =     ehci_get_frame,
-
-        /*
-         * root hub support
-         */
-        .hub_status_data =      ehci_hub_status_data,
-        .hub_control =          ehci_hub_control,
-        .bus_suspend =          ehci_bus_suspend,
-        .bus_resume =           ehci_bus_resume,
-        .relinquish_port =      ehci_relinquish_port,
-        .port_handed_over =     ehci_port_handed_over,
-
-        /*
-         * call back when device connected and addressed
-         */
-        .update_device =        ehci_update_device,
-
-        .clear_tt_buffer_complete       = ehci_clear_tt_buffer_complete,
 };
 
 /*-------------------------------------------------------------------------*/
@@ -480,3 +419,31 @@ static struct pci_driver ehci_pci_driver = {
         },
 #endif
 };
+
+static int __init ehci_pci_init(void)
+{
+        if (usb_disabled())
+                return -ENODEV;
+
+        pr_info("%s: " DRIVER_DESC "\n", hcd_name);
+
+        ehci_init_driver(&ehci_pci_hc_driver, &pci_overrides);
+
+        /* Entries for the PCI suspend/resume callbacks are special */
+        ehci_pci_hc_driver.pci_suspend = ehci_suspend;
+        ehci_pci_hc_driver.pci_resume = ehci_pci_resume;
+
+        return pci_register_driver(&ehci_pci_driver);
+}
+module_init(ehci_pci_init);
+
+static void __exit ehci_pci_cleanup(void)
+{
+        pci_unregister_driver(&ehci_pci_driver);
+}
+module_exit(ehci_pci_cleanup);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR("David Brownell");
+MODULE_AUTHOR("Alan Stern");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/host/ehci-platform.c b/drivers/usb/host/ehci-platform.c
index 764e0100b6f4..58fa0c90c7c7 100644
--- a/drivers/usb/host/ehci-platform.c
+++ b/drivers/usb/host/ehci-platform.c
@@ -18,9 +18,21 @@
  *
  * Licensed under the GNU/GPL. See COPYING for details.
  */
+#include <linux/kernel.h>
+#include <linux/hrtimer.h>
+#include <linux/io.h>
+#include <linux/module.h>
 #include <linux/platform_device.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
 #include <linux/usb/ehci_pdriver.h>
 
+#include "ehci.h"
+
+#define DRIVER_DESC "EHCI generic platform driver"
+
+static const char hcd_name[] = "ehci-platform";
+
 static int ehci_platform_reset(struct usb_hcd *hcd)
 {
         struct platform_device *pdev = to_platform_device(hcd->self.controller);
@@ -38,47 +50,18 @@ static int ehci_platform_reset(struct usb_hcd *hcd)
         if (retval)
                 return retval;
 
-        if (pdata->port_power_on)
-                ehci_port_power(ehci, 1);
-        if (pdata->port_power_off)
-                ehci_port_power(ehci, 0);
-
+        if (pdata->no_io_watchdog)
+                ehci->need_io_watchdog = 0;
         return 0;
 }
 
-static const struct hc_driver ehci_platform_hc_driver = {
-        .description            = hcd_name,
-        .product_desc           = "Generic Platform EHCI Controller",
-        .hcd_priv_size          = sizeof(struct ehci_hcd),
-
-        .irq                    = ehci_irq,
-        .flags                  = HCD_MEMORY | HCD_USB2,
-
-        .reset                  = ehci_platform_reset,
-        .start                  = ehci_run,
-        .stop                   = ehci_stop,
-        .shutdown               = ehci_shutdown,
-
-        .urb_enqueue            = ehci_urb_enqueue,
-        .urb_dequeue            = ehci_urb_dequeue,
-        .endpoint_disable       = ehci_endpoint_disable,
-        .endpoint_reset         = ehci_endpoint_reset,
+static struct hc_driver __read_mostly ehci_platform_hc_driver;
 
-        .get_frame_number       = ehci_get_frame,
-
-        .hub_status_data        = ehci_hub_status_data,
-        .hub_control            = ehci_hub_control,
-#if defined(CONFIG_PM)
-        .bus_suspend            = ehci_bus_suspend,
-        .bus_resume             = ehci_bus_resume,
-#endif
-        .relinquish_port        = ehci_relinquish_port,
-        .port_handed_over       = ehci_port_handed_over,
-
-        .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
+static const struct ehci_driver_overrides platform_overrides __initdata = {
+        .reset =        ehci_platform_reset,
 };
 
-static int __devinit ehci_platform_probe(struct platform_device *dev)
+static int ehci_platform_probe(struct platform_device *dev)
 {
         struct usb_hcd *hcd;
         struct resource *res_mem;
@@ -96,12 +79,12 @@ static int __devinit ehci_platform_probe(struct platform_device *dev)
 
         irq = platform_get_irq(dev, 0);
         if (irq < 0) {
-                pr_err("no irq provided");
+                dev_err(&dev->dev, "no irq provided");
                 return irq;
         }
         res_mem = platform_get_resource(dev, IORESOURCE_MEM, 0);
         if (!res_mem) {
-                pr_err("no memory recourse provided");
+                dev_err(&dev->dev, "no memory resource provided");
                 return -ENXIO;
         }
 
@@ -121,29 +104,19 @@ static int __devinit ehci_platform_probe(struct platform_device *dev)
         hcd->rsrc_start = res_mem->start;
         hcd->rsrc_len = resource_size(res_mem);
 
-        if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
-                pr_err("controller already in use");
-                err = -EBUSY;
-                goto err_put_hcd;
-        }
-
-        hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len);
+        hcd->regs = devm_request_and_ioremap(&dev->dev, res_mem);
         if (!hcd->regs) {
                 err = -ENOMEM;
-                goto err_release_region;
+                goto err_put_hcd;
         }
         err = usb_add_hcd(hcd, irq, IRQF_SHARED);
         if (err)
-                goto err_iounmap;
+                goto err_put_hcd;
 
         platform_set_drvdata(dev, hcd);
 
         return err;
 
-err_iounmap:
-        iounmap(hcd->regs);
-err_release_region:
-        release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
 err_put_hcd:
         usb_put_hcd(hcd);
 err_power:
@@ -153,14 +126,12 @@ err_power:
         return err;
 }
 
-static int __devexit ehci_platform_remove(struct platform_device *dev)
+static int ehci_platform_remove(struct platform_device *dev)
 {
         struct usb_hcd *hcd = platform_get_drvdata(dev);
         struct usb_ehci_pdata *pdata = dev->dev.platform_data;
 
         usb_remove_hcd(hcd);
-        iounmap(hcd->regs);
-        release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
         usb_put_hcd(hcd);
         platform_set_drvdata(dev, NULL);
 
@@ -225,7 +196,7 @@ static const struct dev_pm_ops ehci_platform_pm_ops = {
 static struct platform_driver ehci_platform_driver = {
         .id_table       = ehci_platform_table,
         .probe          = ehci_platform_probe,
-        .remove         = __devexit_p(ehci_platform_remove),
+        .remove         = ehci_platform_remove,
         .shutdown       = usb_hcd_platform_shutdown,
         .driver         = {
                 .owner  = THIS_MODULE,
@@ -233,3 +204,26 @@ static struct platform_driver ehci_platform_driver = {
                 .pm     = &ehci_platform_pm_ops,
         }
 };
+
+static int __init ehci_platform_init(void)
+{
+        if (usb_disabled())
+                return -ENODEV;
+
+        pr_info("%s: " DRIVER_DESC "\n", hcd_name);
+
+        ehci_init_driver(&ehci_platform_hc_driver, &platform_overrides);
+        return platform_driver_register(&ehci_platform_driver);
+}
+module_init(ehci_platform_init);
+
+static void __exit ehci_platform_cleanup(void)
+{
+        platform_driver_unregister(&ehci_platform_driver);
+}
+module_exit(ehci_platform_cleanup);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR("Hauke Mehrtens");
+MODULE_AUTHOR("Alan Stern");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/host/ehci-pmcmsp.c b/drivers/usb/host/ehci-pmcmsp.c
index 087aee2a904f..363890ee41d2 100644
--- a/drivers/usb/host/ehci-pmcmsp.c
+++ b/drivers/usb/host/ehci-pmcmsp.c
@@ -90,7 +90,6 @@ static int ehci_msp_setup(struct usb_hcd *hcd)
                 return retval;
 
         usb_hcd_tdi_set_mode(ehci);
-        ehci_port_power(ehci, 0);
 
         return retval;
 }
diff --git a/drivers/usb/host/ehci-ppc-of.c b/drivers/usb/host/ehci-ppc-of.c
index fa937d05a02b..45aceefd0c2b 100644
--- a/drivers/usb/host/ehci-ppc-of.c
+++ b/drivers/usb/host/ehci-ppc-of.c
@@ -71,7 +71,7 @@ static const struct hc_driver ehci_ppc_of_hc_driver = {
  * Fix: Enable Break Memory Transfer (BMT) in INSNREG3
  */
 #define PPC440EPX_EHCI0_INSREG_BMT      (0x1 << 0)
-static int __devinit
+static int
 ppc44x_enable_bmt(struct device_node *dn)
 {
         __iomem u32 *insreg_virt;
@@ -87,7 +87,7 @@ ppc44x_enable_bmt(struct device_node *dn)
 }
 
 
-static int __devinit ehci_hcd_ppc_of_probe(struct platform_device *op)
+static int ehci_hcd_ppc_of_probe(struct platform_device *op)
 {
         struct device_node *dn = op->dev.of_node;
         struct usb_hcd *hcd;
diff --git a/drivers/usb/host/ehci-ps3.c b/drivers/usb/host/ehci-ps3.c
index 45a356e9f138..df5925a4f0db 100644
--- a/drivers/usb/host/ehci-ps3.c
+++ b/drivers/usb/host/ehci-ps3.c
@@ -93,7 +93,7 @@ static const struct hc_driver ps3_ehci_hc_driver = {
         .clear_tt_buffer_complete       = ehci_clear_tt_buffer_complete,
 };
 
-static int __devinit ps3_ehci_probe(struct ps3_system_bus_device *dev)
+static int ps3_ehci_probe(struct ps3_system_bus_device *dev)
 {
         int result;
         struct usb_hcd *hcd;
diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c
index 4b66374bdc8e..3d989028c836 100644
--- a/drivers/usb/host/ehci-q.c
+++ b/drivers/usb/host/ehci-q.c
@@ -264,15 +264,9 @@ ehci_urb_done(struct ehci_hcd *ehci, struct urb *urb, int status)
 __releases(ehci->lock)
 __acquires(ehci->lock)
 {
-        if (likely (urb->hcpriv != NULL)) {
-                struct ehci_qh  *qh = (struct ehci_qh *) urb->hcpriv;
-
-                /* S-mask in a QH means it's an interrupt urb */
-                if ((qh->hw->hw_info2 & cpu_to_hc32(ehci, QH_SMASK)) != 0) {
-
-                        /* ... update hc-wide periodic stats (for usbfs) */
-                        ehci_to_hcd(ehci)->self.bandwidth_int_reqs--;
-                }
+        if (usb_pipetype(urb->pipe) == PIPE_INTERRUPT) {
+                /* ... update hc-wide periodic stats */
+                ehci_to_hcd(ehci)->self.bandwidth_int_reqs--;
         }
 
         if (unlikely(urb->unlinked)) {
diff --git a/drivers/usb/host/ehci-s5p.c b/drivers/usb/host/ehci-s5p.c
index 85b74be202eb..319dcfaa8735 100644
--- a/drivers/usb/host/ehci-s5p.c
+++ b/drivers/usb/host/ehci-s5p.c
@@ -85,7 +85,7 @@ static void s5p_setup_vbus_gpio(struct platform_device *pdev)
 
 static u64 ehci_s5p_dma_mask = DMA_BIT_MASK(32);
 
-static int __devinit s5p_ehci_probe(struct platform_device *pdev)
+static int s5p_ehci_probe(struct platform_device *pdev)
 {
         struct s5p_ehci_platdata *pdata;
         struct s5p_ehci_hcd *s5p_ehci;
@@ -136,7 +136,7 @@ static int __devinit s5p_ehci_probe(struct platform_device *pdev)
                 goto fail_clk;
         }
 
-        err = clk_enable(s5p_ehci->clk);
+        err = clk_prepare_enable(s5p_ehci->clk);
         if (err)
                 goto fail_clk;
 
@@ -183,13 +183,13 @@ static int __devinit s5p_ehci_probe(struct platform_device *pdev)
         return 0;
 
 fail_io:
-        clk_disable(s5p_ehci->clk);
+        clk_disable_unprepare(s5p_ehci->clk);
 fail_clk:
         usb_put_hcd(hcd);
         return err;
 }
 
-static int __devexit s5p_ehci_remove(struct platform_device *pdev)
+static int s5p_ehci_remove(struct platform_device *pdev)
 {
         struct s5p_ehci_platdata *pdata = pdev->dev.platform_data;
         struct s5p_ehci_hcd *s5p_ehci = platform_get_drvdata(pdev);
@@ -200,7 +200,7 @@ static int __devexit s5p_ehci_remove(struct platform_device *pdev)
         if (pdata && pdata->phy_exit)
                 pdata->phy_exit(pdev, S5P_USB_PHY_HOST);
 
-        clk_disable(s5p_ehci->clk);
+        clk_disable_unprepare(s5p_ehci->clk);
 
         usb_put_hcd(hcd);
 
@@ -231,7 +231,7 @@ static int s5p_ehci_suspend(struct device *dev)
         if (pdata && pdata->phy_exit)
                 pdata->phy_exit(pdev, S5P_USB_PHY_HOST);
 
-        clk_disable(s5p_ehci->clk);
+        clk_disable_unprepare(s5p_ehci->clk);
 
         return rc;
 }
@@ -243,7 +243,7 @@ static int s5p_ehci_resume(struct device *dev)
         struct platform_device *pdev = to_platform_device(dev);
         struct s5p_ehci_platdata *pdata = pdev->dev.platform_data;
 
-        clk_enable(s5p_ehci->clk);
+        clk_prepare_enable(s5p_ehci->clk);
 
         if (pdata && pdata->phy_init)
                 pdata->phy_init(pdev, S5P_USB_PHY_HOST);
@@ -274,7 +274,7 @@ MODULE_DEVICE_TABLE(of, exynos_ehci_match);
 
 static struct platform_driver s5p_ehci_driver = {
         .probe          = s5p_ehci_probe,
-        .remove         = __devexit_p(s5p_ehci_remove),
+        .remove         = s5p_ehci_remove,
         .shutdown       = s5p_ehci_shutdown,
         .driver = {
                 .name   = "s5p-ehci",
diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c
index 7cf3da7babf0..69ebee73c0c1 100644
--- a/drivers/usb/host/ehci-sched.c
+++ b/drivers/usb/host/ehci-sched.c
@@ -36,29 +36,6 @@
 
 static int ehci_get_frame (struct usb_hcd *hcd);
 
-#ifdef CONFIG_PCI
-
-static unsigned ehci_read_frame_index(struct ehci_hcd *ehci)
-{
-        unsigned uf;
-
-        /*
-         * The MosChip MCS9990 controller updates its microframe counter
-         * a little before the frame counter, and occasionally we will read
-         * the invalid intermediate value.  Avoid problems by checking the
-         * microframe number (the low-order 3 bits); if they are 0 then
-         * re-read the register to get the correct value.
-         */
-        uf = ehci_readl(ehci, &ehci->regs->frame_index);
-        if (unlikely(ehci->frame_index_bug && ((uf & 7) == 0)))
-                uf = ehci_readl(ehci, &ehci->regs->frame_index);
-        return uf;
-}
-
-#endif
-
-/*-------------------------------------------------------------------------*/
-
 /*
  * periodic_next_shadow - return "next" pointer on shadow list
  * @periodic: host pointer to qh/itd/sitd
@@ -1361,7 +1338,7 @@ sitd_slot_ok (
  * given EHCI_TUNE_FLS and the slop).  Or, write a smarter scheduler!
  */
 
-#define SCHEDULE_SLOP   80      /* microframes */
+#define SCHEDULING_DELAY        40      /* microframes */
 
 static int
 iso_stream_schedule (
@@ -1370,7 +1347,7 @@ iso_stream_schedule (
         struct ehci_iso_stream  *stream
 )
 {
-        u32                     now, next, start, period, span;
+        u32                     now, base, next, start, period, span;
         int                     status;
         unsigned                mod = ehci->periodic_size << 3;
         struct ehci_iso_sched   *sched = urb->hcpriv;
@@ -1382,62 +1359,72 @@ iso_stream_schedule (
                 span <<= 3;
         }
 
-        if (span > mod - SCHEDULE_SLOP) {
-                ehci_dbg (ehci, "iso request %p too long\n", urb);
-                status = -EFBIG;
-                goto fail;
-        }
-
         now = ehci_read_frame_index(ehci) & (mod - 1);
 
         /* Typical case: reuse current schedule, stream is still active.
          * Hopefully there are no gaps from the host falling behind
-         * (irq delays etc), but if there are we'll take the next
-         * slot in the schedule, implicitly assuming URB_ISO_ASAP.
+         * (irq delays etc).  If there are, the behavior depends on
+         * whether URB_ISO_ASAP is set.
          */
         if (likely (!list_empty (&stream->td_list))) {
-                u32     excess;
 
-                /* For high speed devices, allow scheduling within the
-                 * isochronous scheduling threshold.  For full speed devices
-                 * and Intel PCI-based controllers, don't (work around for
-                 * Intel ICH9 bug).
-                 */
-                if (!stream->highspeed && ehci->fs_i_thresh)
-                        next = now + ehci->i_thresh;
+                /* Take the isochronous scheduling threshold into account */
+                if (ehci->i_thresh)
+                        next = now + ehci->i_thresh;    /* uframe cache */
                 else
-                        next = now;
+                        next = (now + 2 + 7) & ~0x07;   /* full frame cache */
 
-                /* Fell behind (by up to twice the slop amount)?
-                 * We decide based on the time of the last currently-scheduled
-                 * slot, not the time of the next available slot.
+                /*
+                 * Use ehci->last_iso_frame as the base.  There can't be any
+                 * TDs scheduled for earlier than that.
                  */
-                excess = (stream->next_uframe - period - next) & (mod - 1);
-                if (excess >= mod - 2 * SCHEDULE_SLOP)
-                        start = next + excess - mod + period *
-                                        DIV_ROUND_UP(mod - excess, period);
-                else
-                        start = next + excess + period;
-                if (start - now >= mod) {
-                        ehci_dbg(ehci, "request %p would overflow (%d+%d >= %d)\n",
-                                        urb, start - now - period, period,
-                                        mod);
-                        status = -EFBIG;
+                base = ehci->last_iso_frame << 3;
+                next = (next - base) & (mod - 1);
+                start = (stream->next_uframe - base) & (mod - 1);
+
+                /* Is the schedule already full? */
+                if (unlikely(start < period)) {
+                        ehci_dbg(ehci, "iso sched full %p (%u-%u < %u mod %u)\n",
+                                        urb, stream->next_uframe, base,
+                                        period, mod);
+                        status = -ENOSPC;
                         goto fail;
                 }
+
+                /* Behind the scheduling threshold? */
+                if (unlikely(start < next)) {
+
+                        /* USB_ISO_ASAP: Round up to the first available slot */
+                        if (urb->transfer_flags & URB_ISO_ASAP)
+                                start += (next - start + period - 1) & -period;
+
+                        /*
+                         * Not ASAP: Use the next slot in the stream.  If
+                         * the entire URB falls before the threshold, fail.
+                         */
+                        else if (start + span - period < next) {
+                                ehci_dbg(ehci, "iso urb late %p (%u+%u < %u)\n",
+                                                urb, start + base,
+                                                span - period, next + base);
+                                status = -EXDEV;
+                                goto fail;
+                        }
+                }
+
+                start += base;
         }
 
         /* need to schedule; when's the next (u)frame we could start?
          * this is bigger than ehci->i_thresh allows; scheduling itself
-         * isn't free, the slop should handle reasonably slow cpus.  it
+         * isn't free, the delay should handle reasonably slow cpus.  it
          * can also help high bandwidth if the dma and irq loads don't
          * jump until after the queue is primed.
          */
         else {
                 int done = 0;
-                start = SCHEDULE_SLOP + (now & ~0x07);
 
-                /* NOTE:  assumes URB_ISO_ASAP, to limit complexity/bugs */
+                base = now & ~0x07;
+                start = base + SCHEDULING_DELAY;
 
                 /* find a uframe slot with enough bandwidth.
                  * Early uframes are more precious because full-speed
@@ -1464,19 +1451,16 @@ iso_stream_schedule (
 
                 /* no room in the schedule */
                 if (!done) {
-                        ehci_dbg(ehci, "iso resched full %p (now %d max %d)\n",
-                                urb, now, now + mod);
+                        ehci_dbg(ehci, "iso sched full %p", urb);
                         status = -ENOSPC;
                         goto fail;
                 }
         }
 
         /* Tried to schedule too far into the future? */
-        if (unlikely(start - now + span - period
-                                >= mod - 2 * SCHEDULE_SLOP)) {
-                ehci_dbg(ehci, "request %p would overflow (%d+%d >= %d)\n",
-                                urb, start - now, span - period,
-                                mod - 2 * SCHEDULE_SLOP);
+        if (unlikely(start - base + span - period >= mod)) {
+                ehci_dbg(ehci, "request %p would overflow (%u+%u >= %u)\n",
+                                urb, start - base, span - period, mod);
                 status = -EFBIG;
                 goto fail;
         }
@@ -1490,7 +1474,7 @@ iso_stream_schedule (
 
         /* Make sure scan_isoc() sees these */
         if (ehci->isoc_count == 0)
-                ehci->next_frame = now >> 3;
+                ehci->last_iso_frame = now >> 3;
         return 0;
 
  fail:
@@ -1646,7 +1630,7 @@ static void itd_link_urb(
 
         /* don't need that schedule data any more */
         iso_sched_free (stream, iso_sched);
-        urb->hcpriv = NULL;
+        urb->hcpriv = stream;
 
         ++ehci->isoc_count;
         enable_periodic(ehci);
@@ -1708,7 +1692,7 @@ static bool itd_complete(struct ehci_hcd *ehci, struct ehci_itd *itd)
                         urb->actual_length += desc->actual_length;
                 } else {
                         /* URB was too late */
-                        desc->status = -EXDEV;
+                        urb->error_count++;
                 }
         }
 
@@ -2045,7 +2029,7 @@ static void sitd_link_urb(
 
         /* don't need that schedule data any more */
         iso_sched_free (stream, sched);
-        urb->hcpriv = NULL;
+        urb->hcpriv = stream;
 
         ++ehci->isoc_count;
         enable_periodic(ehci);
@@ -2081,7 +2065,7 @@ static bool sitd_complete(struct ehci_hcd *ehci, struct ehci_sitd *sitd)
         t = hc32_to_cpup(ehci, &sitd->hw_results);
 
         /* report transfer status */
-        if (t & SITD_ERRS) {
+        if (unlikely(t & SITD_ERRS)) {
                 urb->error_count++;
                 if (t & SITD_STS_DBE)
                         desc->status = usb_pipein (urb->pipe)
@@ -2091,6 +2075,9 @@ static bool sitd_complete(struct ehci_hcd *ehci, struct ehci_sitd *sitd)
                         desc->status = -EOVERFLOW;
                 else /* XACT, MMF, etc */
                         desc->status = -EPROTO;
+        } else if (unlikely(t & SITD_STS_ACTIVE)) {
+                /* URB was too late */
+                urb->error_count++;
         } else {
                 desc->status = 0;
                 desc->actual_length = desc->length - SITD_LENGTH(t);
@@ -2220,16 +2207,16 @@ static void scan_isoc(struct ehci_hcd *ehci)
                 now_frame = (uf >> 3) & fmask;
                 live = true;
         } else  {
-                now_frame = (ehci->next_frame - 1) & fmask;
+                now_frame = (ehci->last_iso_frame - 1) & fmask;
                 live = false;
         }
         ehci->now_frame = now_frame;
 
-        frame = ehci->next_frame;
         for (;;) {
                 union ehci_shadow       q, *q_p;
                 __hc32                  type, *hw_p;
 
+                frame = ehci->last_iso_frame;
 restart:
                 /* scan each element in frame's queue for completions */
                 q_p = &ehci->pshadow [frame];
@@ -2334,7 +2321,6 @@ restart:
                 /* Stop when we have reached the current frame */
                 if (frame == now_frame)
                         break;
-                frame = (frame + 1) & fmask;
+                ehci->last_iso_frame = (frame + 1) & fmask;
         }
-        ehci->next_frame = now_frame;
 }
diff --git a/drivers/usb/host/ehci-sh.c b/drivers/usb/host/ehci-sh.c
index 6081e1ed3ac9..0c90a24fa989 100644
--- a/drivers/usb/host/ehci-sh.c
+++ b/drivers/usb/host/ehci-sh.c
@@ -21,17 +21,10 @@ struct ehci_sh_priv {
 static int ehci_sh_reset(struct usb_hcd *hcd)
 {
         struct ehci_hcd *ehci = hcd_to_ehci(hcd);
-        int ret;
 
         ehci->caps = hcd->regs;
 
-        ret = ehci_setup(hcd);
-        if (unlikely(ret))
-                return ret;
-
-        ehci_port_power(ehci, 0);
-
-        return ret;
+        return ehci_setup(hcd);
 }
 
 static const struct hc_driver ehci_sh_hc_driver = {
diff --git a/drivers/usb/host/ehci-spear.c b/drivers/usb/host/ehci-spear.c
index c718a065e154..466c1bb5b967 100644
--- a/drivers/usb/host/ehci-spear.c
+++ b/drivers/usb/host/ehci-spear.c
@@ -37,18 +37,11 @@ static void spear_stop_ehci(struct spear_ehci *ehci)
 static int ehci_spear_setup(struct usb_hcd *hcd)
 {
         struct ehci_hcd *ehci = hcd_to_ehci(hcd);
-        int retval = 0;
 
         /* registers start at offset 0x0 */
         ehci->caps = hcd->regs;
 
-        retval = ehci_setup(hcd);
-        if (retval)
-                return retval;
-
-        ehci_port_power(ehci, 0);
-
-        return retval;
+        return ehci_setup(hcd);
 }
 
 static const struct hc_driver ehci_spear_hc_driver = {
@@ -116,8 +109,6 @@ static int spear_ehci_hcd_drv_probe(struct platform_device *pdev)
         struct clk *usbh_clk;
         const struct hc_driver *driver = &ehci_spear_hc_driver;
         int irq, retval;
-        char clk_name[20] = "usbh_clk";
-        static int instance = -1;
 
         if (usb_disabled())
                 return -ENODEV;
@@ -125,7 +116,7 @@ static int spear_ehci_hcd_drv_probe(struct platform_device *pdev)
         irq = platform_get_irq(pdev, 0);
         if (irq < 0) {
                 retval = irq;
-                goto fail_irq_get;
+                goto fail;
         }
 
         /*
@@ -136,47 +127,38 @@ static int spear_ehci_hcd_drv_probe(struct platform_device *pdev)
         if (!pdev->dev.dma_mask)
                 pdev->dev.dma_mask = &spear_ehci_dma_mask;
 
-        /*
-         * Increment the device instance, when probing via device-tree
-         */
-        if (pdev->id < 0)
-                instance++;
-        else
-                instance = pdev->id;
-        sprintf(clk_name, "usbh.%01d_clk", instance);
-
-        usbh_clk = clk_get(NULL, clk_name);
+        usbh_clk = devm_clk_get(&pdev->dev, NULL);
         if (IS_ERR(usbh_clk)) {
                 dev_err(&pdev->dev, "Error getting interface clock\n");
                 retval = PTR_ERR(usbh_clk);
-                goto fail_get_usbh_clk;
+                goto fail;
         }
 
         hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
         if (!hcd) {
                 retval = -ENOMEM;
-                goto fail_create_hcd;
+                goto fail;
         }
 
         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
         if (!res) {
                 retval = -ENODEV;
-                goto fail_request_resource;
+                goto err_put_hcd;
         }
 
         hcd->rsrc_start = res->start;
         hcd->rsrc_len = resource_size(res);
-        if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len,
+        if (!devm_request_mem_region(&pdev->dev, hcd->rsrc_start, hcd->rsrc_len,
                                 driver->description)) {
                 retval = -EBUSY;
-                goto fail_request_resource;
+                goto err_put_hcd;
         }
 
-        hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
+        hcd->regs = devm_ioremap(&pdev->dev, hcd->rsrc_start, hcd->rsrc_len);
         if (hcd->regs == NULL) {
                 dev_dbg(&pdev->dev, "error mapping memory\n");
                 retval = -ENOMEM;
-                goto fail_ioremap;
+                goto err_put_hcd;
         }
 
         ehci = (struct spear_ehci *)hcd_to_ehci(hcd);
@@ -185,21 +167,15 @@ static int spear_ehci_hcd_drv_probe(struct platform_device *pdev)
         spear_start_ehci(ehci);
         retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
         if (retval)
-                goto fail_add_hcd;
+                goto err_stop_ehci;
 
         return retval;
 
-fail_add_hcd:
+err_stop_ehci:
         spear_stop_ehci(ehci);
-        iounmap(hcd->regs);
-fail_ioremap:
-        release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
-fail_request_resource:
+err_put_hcd:
         usb_put_hcd(hcd);
-fail_create_hcd:
-        clk_put(usbh_clk);
-fail_get_usbh_clk:
-fail_irq_get:
+fail:
         dev_err(&pdev->dev, "init fail, %d\n", retval);
 
         return retval ;
@@ -218,17 +194,12 @@ static int spear_ehci_hcd_drv_remove(struct platform_device *pdev)
 
         if (ehci_p->clk)
                 spear_stop_ehci(ehci_p);
-        iounmap(hcd->regs);
-        release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
         usb_put_hcd(hcd);
 
-        if (ehci_p->clk)
-                clk_put(ehci_p->clk);
-
         return 0;
 }
 
-static struct of_device_id spear_ehci_id_table[] __devinitdata = {
+static struct of_device_id spear_ehci_id_table[] = {
         { .compatible = "st,spear600-ehci", },
         { },
 };
diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c
index 6223d1757848..acf17556bd87 100644
--- a/drivers/usb/host/ehci-tegra.c
+++ b/drivers/usb/host/ehci-tegra.c
@@ -28,7 +28,10 @@
 #include <linux/pm_runtime.h>
 
 #include <linux/usb/tegra_usb_phy.h>
-#include <mach/iomap.h>
+
+#define TEGRA_USB_BASE                  0xC5000000
+#define TEGRA_USB2_BASE                 0xC5004000
+#define TEGRA_USB3_BASE                 0xC5008000
 
 #define TEGRA_USB_DMA_ALIGN 32
 
@@ -277,7 +280,6 @@ static void tegra_ehci_shutdown(struct usb_hcd *hcd)
 static int tegra_ehci_setup(struct usb_hcd *hcd)
 {
         struct ehci_hcd *ehci = hcd_to_ehci(hcd);
-        int retval;
 
         /* EHCI registers start at offset 0x100 */
         ehci->caps = hcd->regs + 0x100;
@@ -285,12 +287,7 @@ static int tegra_ehci_setup(struct usb_hcd *hcd)
         /* switch to host mode */
         hcd->has_tt = 1;
 
-        retval = ehci_setup(hcd);
-        if (retval)
-                return retval;
-
-        ehci_port_power(ehci, 1);
-        return retval;
+        return ehci_setup(hcd);
 }
 
 struct dma_aligned_buffer {
@@ -778,9 +775,6 @@ static int tegra_ehci_remove(struct platform_device *pdev)
         struct tegra_ehci_hcd *tegra = platform_get_drvdata(pdev);
         struct usb_hcd *hcd = ehci_to_hcd(tegra->ehci);
 
-        if (tegra == NULL || hcd == NULL)
-                return -EINVAL;
-
         pm_runtime_get_sync(&pdev->dev);
         pm_runtime_disable(&pdev->dev);
         pm_runtime_put_noidle(&pdev->dev);
@@ -811,7 +805,7 @@ static void tegra_ehci_hcd_shutdown(struct platform_device *pdev)
                 hcd->driver->shutdown(hcd);
 }
 
-static struct of_device_id tegra_ehci_of_match[] __devinitdata = {
+static struct of_device_id tegra_ehci_of_match[] = {
         { .compatible = "nvidia,tegra20-ehci", },
         { },
 };
diff --git a/drivers/usb/host/ehci-vt8500.c b/drivers/usb/host/ehci-vt8500.c
index d3c9a3e397b9..11695d5b9d86 100644
--- a/drivers/usb/host/ehci-vt8500.c
+++ b/drivers/usb/host/ehci-vt8500.c
@@ -19,22 +19,6 @@
 #include <linux/of.h>
 #include <linux/platform_device.h>
 
-static int ehci_update_device(struct usb_hcd *hcd, struct usb_device *udev)
-{
-        struct ehci_hcd *ehci = hcd_to_ehci(hcd);
-        int rc = 0;
-
-        if (!udev->parent) /* udev is root hub itself, impossible */
-                rc = -1;
-        /* we only support lpm device connected to root hub yet */
-        if (ehci->has_lpm && !udev->parent->parent) {
-                rc = ehci_lpm_set_da(ehci, udev->devnum, udev->portnum);
-                if (!rc)
-                        rc = ehci_lpm_check(ehci, udev->portnum);
-        }
-        return rc;
-}
-
 static const struct hc_driver vt8500_ehci_hc_driver = {
         .description            = hcd_name,
         .product_desc           = "VT8500 EHCI",
@@ -77,11 +61,6 @@ static const struct hc_driver vt8500_ehci_hc_driver = {
         .relinquish_port        = ehci_relinquish_port,
         .port_handed_over       = ehci_port_handed_over,
 
-        /*
-         * call back when device connected and addressed
-         */
-        .update_device =        ehci_update_device,
-
         .clear_tt_buffer_complete       = ehci_clear_tt_buffer_complete,
 };
 
diff --git a/drivers/usb/host/ehci-w90x900.c b/drivers/usb/host/ehci-w90x900.c
index ec598082c14b..59e0e24c753f 100644
--- a/drivers/usb/host/ehci-w90x900.c
+++ b/drivers/usb/host/ehci-w90x900.c
@@ -13,12 +13,12 @@
 
 #include <linux/platform_device.h>
 
-/*ebable phy0 and phy1 for w90p910*/
+/* enable phy0 and phy1 for w90p910 */
 #define ENPHY           (0x01<<8)
 #define PHY0_CTR        (0xA4)
 #define PHY1_CTR        (0xA8)
 
-static int __devinit usb_w90x900_probe(const struct hc_driver *driver,
+static int usb_w90x900_probe(const struct hc_driver *driver,
                       struct platform_device *pdev)
 {
         struct usb_hcd *hcd;
@@ -147,7 +147,7 @@ static const struct hc_driver ehci_w90x900_hc_driver = {
         .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
 };
 
-static int __devinit ehci_w90x900_probe(struct platform_device *pdev)
+static int ehci_w90x900_probe(struct platform_device *pdev)
 {
         if (usb_disabled())
                 return -ENODEV;
@@ -155,7 +155,7 @@ static int __devinit ehci_w90x900_probe(struct platform_device *pdev)
         return usb_w90x900_probe(&ehci_w90x900_hc_driver, pdev);
 }
 
-static int __devexit ehci_w90x900_remove(struct platform_device *pdev)
+static int ehci_w90x900_remove(struct platform_device *pdev)
 {
         struct usb_hcd *hcd = platform_get_drvdata(pdev);
 
@@ -166,7 +166,7 @@ static int __devexit ehci_w90x900_remove(struct platform_device *pdev)
 
 static struct platform_driver ehci_hcd_w90x900_driver = {
         .probe  = ehci_w90x900_probe,
-        .remove = __devexit_p(ehci_w90x900_remove),
+        .remove = ehci_w90x900_remove,
         .driver = {
                 .name = "w90x900-ehci",
                 .owner = THIS_MODULE,
diff --git a/drivers/usb/host/ehci-xilinx-of.c b/drivers/usb/host/ehci-xilinx-of.c
index 6a3f921a5d76..4f285e8e404a 100644
--- a/drivers/usb/host/ehci-xilinx-of.c
+++ b/drivers/usb/host/ehci-xilinx-of.c
@@ -125,7 +125,7 @@ static const struct hc_driver ehci_xilinx_of_hc_driver = {
  * as HS only or HS/FS only, it checks the configuration in the device tree
  * entry, and sets an appropriate value for hcd->has_tt.
  */
-static int __devinit ehci_hcd_xilinx_of_probe(struct platform_device *op)
+static int ehci_hcd_xilinx_of_probe(struct platform_device *op)
 {
         struct device_node *dn = op->dev.of_node;
         struct usb_hcd *hcd;
diff --git a/drivers/usb/host/ehci-xls.c b/drivers/usb/host/ehci-xls.c
deleted file mode 100644
index 8dc6a22d90b8..000000000000
--- a/drivers/usb/host/ehci-xls.c
+++ /dev/null
@@ -1,142 +0,0 @@
-/*
- * EHCI HCD for Netlogic XLS processors.
- *
- * (C) Copyright 2011 Netlogic Microsystems Inc.
- *
- *  Based on various ehci-*.c drivers
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive for
- * more details.
- */
-
-#include <linux/platform_device.h>
-
-static int ehci_xls_setup(struct usb_hcd *hcd)
-{
-        struct ehci_hcd *ehci = hcd_to_ehci(hcd);
-
-        ehci->caps = hcd->regs;
-
-        return ehci_setup(hcd);
-}
-
-int ehci_xls_probe_internal(const struct hc_driver *driver,
-        struct platform_device *pdev)
-{
-        struct usb_hcd  *hcd;
-        struct resource *res;
-        int retval, irq;
-
-        /* Get our IRQ from an earlier registered Platform Resource */
-        irq = platform_get_irq(pdev, 0);
-        if (irq < 0) {
-                dev_err(&pdev->dev, "Found HC with no IRQ. Check %s setup!\n",
-                                dev_name(&pdev->dev));
-                return -ENODEV;
-        }
-
-        /* Get our Memory Handle */
-        res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-        if (!res) {
-                dev_err(&pdev->dev, "Error: MMIO Handle %s setup!\n",
-                                dev_name(&pdev->dev));
-                return -ENODEV;
-        }
-        hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
-        if (!hcd) {
-                retval = -ENOMEM;
-                goto err1;
-        }
-
-        hcd->rsrc_start = res->start;
-        hcd->rsrc_len = resource_size(res);
-
-        if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len,
-                                driver->description)) {
-                dev_dbg(&pdev->dev, "controller already in use\n");
-                retval = -EBUSY;
-                goto err2;
-        }
-        hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len);
-
-        if (hcd->regs == NULL) {
-                dev_dbg(&pdev->dev, "error mapping memory\n");
-                retval = -EFAULT;
-                goto err3;
-        }
-
-        retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
-        if (retval != 0)
-                goto err4;
-        return retval;
-
-err4:
-        iounmap(hcd->regs);
-err3:
-        release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
-err2:
-        usb_put_hcd(hcd);
-err1:
-        dev_err(&pdev->dev, "init %s fail, %d\n", dev_name(&pdev->dev),
-                        retval);
-        return retval;
-}
-
-static struct hc_driver ehci_xls_hc_driver = {
-        .description    = hcd_name,
-        .product_desc   = "XLS EHCI Host Controller",
-        .hcd_priv_size  = sizeof(struct ehci_hcd),
-        .irq            = ehci_irq,
-        .flags          = HCD_USB2 | HCD_MEMORY,
-        .reset          = ehci_xls_setup,
-        .start          = ehci_run,
-        .stop           = ehci_stop,
-        .shutdown       = ehci_shutdown,
-
-        .urb_enqueue    = ehci_urb_enqueue,
-        .urb_dequeue    = ehci_urb_dequeue,
-        .endpoint_disable = ehci_endpoint_disable,
-        .endpoint_reset = ehci_endpoint_reset,
-
-        .get_frame_number = ehci_get_frame,
-
-        .hub_status_data = ehci_hub_status_data,
-        .hub_control    = ehci_hub_control,
-        .bus_suspend    = ehci_bus_suspend,
-        .bus_resume     = ehci_bus_resume,
-        .relinquish_port = ehci_relinquish_port,
-        .port_handed_over = ehci_port_handed_over,
-
-        .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
-};
-
-static int ehci_xls_probe(struct platform_device *pdev)
-{
-        if (usb_disabled())
-                return -ENODEV;
-
-        return ehci_xls_probe_internal(&ehci_xls_hc_driver, pdev);
-}
-
-static int ehci_xls_remove(struct platform_device *pdev)
-{
-        struct usb_hcd *hcd = platform_get_drvdata(pdev);
-
-        usb_remove_hcd(hcd);
-        iounmap(hcd->regs);
-        release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
-        usb_put_hcd(hcd);
-        return 0;
-}
-
-MODULE_ALIAS("ehci-xls");
-
-static struct platform_driver ehci_xls_driver = {
-        .probe          = ehci_xls_probe,
-        .remove         = ehci_xls_remove,
-        .shutdown       = usb_hcd_platform_shutdown,
-        .driver         = {
-                .name = "ehci-xls",
-        },
-};
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index da07d98f7d1d..9dadc7118d68 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -143,7 +143,7 @@ struct ehci_hcd {			/* one per controller */
         struct ehci_qh          *intr_unlink_last;
         unsigned                intr_unlink_cycle;
         unsigned                now_frame;      /* frame from HC hardware */
-        unsigned                next_frame;     /* scan periodic, start here */
+        unsigned                last_iso_frame; /* last frame scanned for iso */
         unsigned                intr_count;     /* intr activity count */
         unsigned                isoc_count;     /* isoc activity count */
         unsigned                periodic_count; /* periodic activity count */
@@ -193,7 +193,6 @@ struct ehci_hcd {			/* one per controller */
         unsigned                has_amcc_usb23:1;
         unsigned                need_io_watchdog:1;
         unsigned                amd_pll_fix:1;
-        unsigned                fs_i_thresh:1;  /* Intel iso scheduling */
         unsigned                use_dummy_qh:1; /* AMD Frame List table quirk*/
         unsigned                has_synopsys_hc_bug:1; /* Synopsys HC */
         unsigned                frame_index_bug:1; /* MosChip (AKA NetMos) */
@@ -207,7 +206,6 @@ struct ehci_hcd {			/* one per controller */
         #define OHCI_HCCTRL_LEN         0x4
         __hc32                  *ohci_hcctrl_reg;
         unsigned                has_hostpc:1;
-        unsigned                has_lpm:1;  /* support link power management */
         unsigned                has_ppcd:1; /* support per-port change bits */
         u8                      sbrn;           /* packed release number */
 
@@ -762,26 +760,41 @@ static inline u32 hc32_to_cpup (const struct ehci_hcd *ehci, const __hc32 *x)
 
 /*-------------------------------------------------------------------------*/
 
-#ifdef CONFIG_PCI
-
-/* For working around the MosChip frame-index-register bug */
-static unsigned ehci_read_frame_index(struct ehci_hcd *ehci);
-
+#define ehci_dbg(ehci, fmt, args...) \
+        dev_dbg(ehci_to_hcd(ehci)->self.controller , fmt , ## args)
+#define ehci_err(ehci, fmt, args...) \
+        dev_err(ehci_to_hcd(ehci)->self.controller , fmt , ## args)
+#define ehci_info(ehci, fmt, args...) \
+        dev_info(ehci_to_hcd(ehci)->self.controller , fmt , ## args)
+#define ehci_warn(ehci, fmt, args...) \
+        dev_warn(ehci_to_hcd(ehci)->self.controller , fmt , ## args)
+
+#ifdef VERBOSE_DEBUG
+#       define ehci_vdbg ehci_dbg
 #else
-
-static inline unsigned ehci_read_frame_index(struct ehci_hcd *ehci)
-{
-        return ehci_readl(ehci, &ehci->regs->frame_index);
-}
-
+        static inline void ehci_vdbg(struct ehci_hcd *ehci, ...) {}
 #endif
 
-/*-------------------------------------------------------------------------*/
-
 #ifndef DEBUG
 #define STUB_DEBUG_FILES
 #endif  /* DEBUG */
 
 /*-------------------------------------------------------------------------*/
 
+/* Declarations of things exported for use by ehci platform drivers */
+
+struct ehci_driver_overrides {
+        size_t          extra_priv_size;
+        int             (*reset)(struct usb_hcd *hcd);
+};
+
+extern void     ehci_init_driver(struct hc_driver *drv,
+                                const struct ehci_driver_overrides *over);
+extern int      ehci_setup(struct usb_hcd *hcd);
+
+#ifdef CONFIG_PM
+extern int      ehci_suspend(struct usb_hcd *hcd, bool do_wakeup);
+extern int      ehci_resume(struct usb_hcd *hcd, bool hibernated);
+#endif  /* CONFIG_PM */
+
 #endif /* __LINUX_EHCI_HCD_H */
diff --git a/drivers/usb/host/fhci-hcd.c b/drivers/usb/host/fhci-hcd.c
index 7da1a26bed2e..0b46542591ff 100644
--- a/drivers/usb/host/fhci-hcd.c
+++ b/drivers/usb/host/fhci-hcd.c
@@ -561,7 +561,7 @@ static const struct hc_driver fhci_driver = {
         .hub_control = fhci_hub_control,
 };
 
-static int __devinit of_fhci_probe(struct platform_device *ofdev)
+static int of_fhci_probe(struct platform_device *ofdev)
 {
         struct device *dev = &ofdev->dev;
         struct device_node *node = dev->of_node;
@@ -780,7 +780,7 @@ err_regs:
         return ret;
 }
 
-static int __devexit fhci_remove(struct device *dev)
+static int fhci_remove(struct device *dev)
 {
         struct usb_hcd *hcd = dev_get_drvdata(dev);
         struct fhci_hcd *fhci = hcd_to_fhci(hcd);
@@ -803,7 +803,7 @@ static int __devexit fhci_remove(struct device *dev)
         return 0;
 }
 
-static int __devexit of_fhci_remove(struct platform_device *ofdev)
+static int of_fhci_remove(struct platform_device *ofdev)
 {
         return fhci_remove(&ofdev->dev);
 }
@@ -821,7 +821,7 @@ static struct platform_driver of_fhci_driver = {
                 .of_match_table = of_fhci_match,
         },
         .probe          = of_fhci_probe,
-        .remove         = __devexit_p(of_fhci_remove),
+        .remove         = of_fhci_remove,
 };
 
 module_platform_driver(of_fhci_driver);
diff --git a/drivers/usb/host/fsl-mph-dr-of.c b/drivers/usb/host/fsl-mph-dr-of.c
index 1e771292383f..11e0b79ff9d5 100644
--- a/drivers/usb/host/fsl-mph-dr-of.c
+++ b/drivers/usb/host/fsl-mph-dr-of.c
@@ -24,7 +24,7 @@ struct fsl_usb2_dev_data {
         enum fsl_usb2_operating_modes op_mode;  /* operating mode */
 };
 
-struct fsl_usb2_dev_data dr_mode_data[] __devinitdata = {
+struct fsl_usb2_dev_data dr_mode_data[] = {
         {
                 .dr_mode = "host",
                 .drivers = { "fsl-ehci", NULL, NULL, },
@@ -42,7 +42,7 @@ struct fsl_usb2_dev_data dr_mode_data[] __devinitdata = {
         },
 };
 
-struct fsl_usb2_dev_data * __devinit get_dr_mode_data(struct device_node *np)
+struct fsl_usb2_dev_data *get_dr_mode_data(struct device_node *np)
 {
         const unsigned char *prop;
         int i;
@@ -59,7 +59,7 @@ struct fsl_usb2_dev_data * __devinit get_dr_mode_data(struct device_node *np)
         return &dr_mode_data[0]; /* mode not specified, use host */
 }
 
-static enum fsl_usb2_phy_modes __devinit determine_usb_phy(const char *phy_type)
+static enum fsl_usb2_phy_modes determine_usb_phy(const char *phy_type)
 {
         if (!phy_type)
                 return FSL_USB2_PHY_NONE;
@@ -75,7 +75,7 @@ static enum fsl_usb2_phy_modes __devinit determine_usb_phy(const char *phy_type)
         return FSL_USB2_PHY_NONE;
 }
 
-struct platform_device * __devinit fsl_usb2_device_register(
+struct platform_device *fsl_usb2_device_register(
                                         struct platform_device *ofdev,
                                         struct fsl_usb2_platform_data *pdata,
                                         const char *name, int id)
@@ -142,6 +142,9 @@ static int usb_get_ver_info(struct device_node *np)
                         return ver;
         }
 
+        if (of_device_is_compatible(np, "fsl,mpc5121-usb2-dr"))
+                return FSL_USB_VER_OLD;
+
         if (of_device_is_compatible(np, "fsl-usb2-mph")) {
                 if (of_device_is_compatible(np, "fsl-usb2-mph-v1.6"))
                         ver = FSL_USB_VER_1_6;
@@ -154,7 +157,7 @@ static int usb_get_ver_info(struct device_node *np)
         return ver;
 }
 
-static int __devinit fsl_usb2_mph_dr_of_probe(struct platform_device *ofdev)
+static int fsl_usb2_mph_dr_of_probe(struct platform_device *ofdev)
 {
         struct device_node *np = ofdev->dev.of_node;
         struct platform_device *usb_dev;
@@ -224,13 +227,13 @@ static int __devinit fsl_usb2_mph_dr_of_probe(struct platform_device *ofdev)
         return 0;
 }
 
-static int __devexit __unregister_subdev(struct device *dev, void *d)
+static int __unregister_subdev(struct device *dev, void *d)
 {
         platform_device_unregister(to_platform_device(dev));
         return 0;
 }
 
-static int __devexit fsl_usb2_mph_dr_of_remove(struct platform_device *ofdev)
+static int fsl_usb2_mph_dr_of_remove(struct platform_device *ofdev)
 {
         device_for_each_child(&ofdev->dev, NULL, __unregister_subdev);
         return 0;
@@ -336,7 +339,7 @@ static struct platform_driver fsl_usb2_mph_dr_driver = {
                 .of_match_table = fsl_usb2_mph_dr_of_match,
         },
         .probe  = fsl_usb2_mph_dr_of_probe,
-        .remove = __devexit_p(fsl_usb2_mph_dr_of_remove),
+        .remove = fsl_usb2_mph_dr_of_remove,
 };
 
 module_platform_driver(fsl_usb2_mph_dr_driver);
diff --git a/drivers/usb/host/imx21-hcd.c b/drivers/usb/host/imx21-hcd.c
index f19e2690c232..f0ebe8e7c58b 100644
--- a/drivers/usb/host/imx21-hcd.c
+++ b/drivers/usb/host/imx21-hcd.c
@@ -58,6 +58,7 @@
 #include <linux/usb.h>
 #include <linux/usb/hcd.h>
 #include <linux/dma-mapping.h>
+#include <linux/module.h>
 
 #include "imx21-hcd.h"
 
@@ -1680,7 +1681,7 @@ static int imx21_hc_reset(struct usb_hcd *hcd)
         return 0;
 }
 
-static int __devinit imx21_hc_start(struct usb_hcd *hcd)
+static int imx21_hc_start(struct usb_hcd *hcd)
 {
         struct imx21 *imx21 = hcd_to_imx21(hcd);
         unsigned long flags;
diff --git a/drivers/usb/host/isp116x-hcd.c b/drivers/usb/host/isp116x-hcd.c
index 9e65e3091c8a..b64e661618bb 100644
--- a/drivers/usb/host/isp116x-hcd.c
+++ b/drivers/usb/host/isp116x-hcd.c
@@ -1557,7 +1557,7 @@ static int isp116x_remove(struct platform_device *pdev)
         return 0;
 }
 
-static int __devinit isp116x_probe(struct platform_device *pdev)
+static int isp116x_probe(struct platform_device *pdev)
 {
         struct usb_hcd *hcd;
         struct isp116x *isp116x;
diff --git a/drivers/usb/host/isp1362-hcd.c b/drivers/usb/host/isp1362-hcd.c
index 256326322cfd..974480c516fa 100644
--- a/drivers/usb/host/isp1362-hcd.c
+++ b/drivers/usb/host/isp1362-hcd.c
@@ -2645,7 +2645,7 @@ static struct hc_driver isp1362_hc_driver = {
 
 /*-------------------------------------------------------------------------*/
 
-static int __devexit isp1362_remove(struct platform_device *pdev)
+static int isp1362_remove(struct platform_device *pdev)
 {
         struct usb_hcd *hcd = platform_get_drvdata(pdev);
         struct isp1362_hcd *isp1362_hcd = hcd_to_isp1362_hcd(hcd);
@@ -2680,7 +2680,7 @@ static int __devexit isp1362_remove(struct platform_device *pdev)
         return 0;
 }
 
-static int __devinit isp1362_probe(struct platform_device *pdev)
+static int isp1362_probe(struct platform_device *pdev)
 {
         struct usb_hcd *hcd;
         struct isp1362_hcd *isp1362_hcd;
@@ -2856,7 +2856,7 @@ static int isp1362_resume(struct platform_device *pdev)
 
 static struct platform_driver isp1362_driver = {
         .probe = isp1362_probe,
-        .remove = __devexit_p(isp1362_remove),
+        .remove = isp1362_remove,
 
         .suspend = isp1362_suspend,
         .resume = isp1362_resume,
diff --git a/drivers/usb/host/isp1760-if.c b/drivers/usb/host/isp1760-if.c
index fff114fd5461..bbb791bd7617 100644
--- a/drivers/usb/host/isp1760-if.c
+++ b/drivers/usb/host/isp1760-if.c
@@ -43,7 +43,6 @@ static int of_isp1760_probe(struct platform_device *dev)
         struct device_node *dp = dev->dev.of_node;
         struct resource *res;
         struct resource memory;
-        struct of_irq oirq;
         int virq;
         resource_size_t res_len;
         int ret;
@@ -69,14 +68,12 @@ static int of_isp1760_probe(struct platform_device *dev)
                 goto free_data;
         }
 
-        if (of_irq_map_one(dp, 0, &oirq)) {
+        virq = irq_of_parse_and_map(dp, 0);
+        if (!virq) {
                 ret = -ENODEV;
                 goto release_reg;
         }
 
-        virq = irq_create_of_mapping(oirq.controller, oirq.specifier,
-                        oirq.size);
-
         if (of_device_is_compatible(dp, "nxp,usb-isp1761"))
                 devflags |= ISP1760_FLAG_ISP1761;
 
@@ -175,7 +172,7 @@ static struct platform_driver isp1760_of_driver = {
 #endif
 
 #ifdef CONFIG_PCI
-static int __devinit isp1761_pci_probe(struct pci_dev *dev,
+static int isp1761_pci_probe(struct pci_dev *dev,
                 const struct pci_device_id *id)
 {
         u8 latency, limit;
@@ -349,7 +346,7 @@ static struct pci_driver isp1761_pci_driver = {
 };
 #endif
 
-static int __devinit isp1760_plat_probe(struct platform_device *pdev)
+static int isp1760_plat_probe(struct platform_device *pdev)
 {
         int ret = 0;
         struct usb_hcd *hcd;
@@ -416,7 +413,7 @@ out:
         return ret;
 }
 
-static int __devexit isp1760_plat_remove(struct platform_device *pdev)
+static int isp1760_plat_remove(struct platform_device *pdev)
 {
         struct resource *mem_res;
         resource_size_t mem_size;
@@ -435,7 +432,7 @@ static int __devexit isp1760_plat_remove(struct platform_device *pdev)
 
 static struct platform_driver isp1760_plat_driver = {
         .probe  = isp1760_plat_probe,
-        .remove = __devexit_p(isp1760_plat_remove),
+        .remove = isp1760_plat_remove,
         .driver = {
                 .name   = "isp1760",
         },
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index 0bf72f943b00..a0cb44f0e724 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -16,11 +16,11 @@
 #include <linux/platform_device.h>
 #include <linux/of_platform.h>
 #include <linux/of_gpio.h>
+#include <linux/platform_data/atmel.h>
 
 #include <mach/hardware.h>
 #include <asm/gpio.h>
 
-#include <mach/board.h>
 #include <mach/cpu.h>
 
 #ifndef CONFIG_ARCH_AT91
@@ -94,7 +94,7 @@ static void at91_stop_hc(struct platform_device *pdev)
 
 /*-------------------------------------------------------------------------*/
 
-static void __devexit usb_hcd_at91_remove (struct usb_hcd *, struct platform_device *);
+static void usb_hcd_at91_remove (struct usb_hcd *, struct platform_device *);
 
 /* configure so an HC device and id are always provided */
 /* always called with process context; sleeping is OK */
@@ -108,7 +108,7 @@ static void __devexit usb_hcd_at91_remove (struct usb_hcd *, struct platform_dev
  * then invokes the start() method for the HCD associated with it
  * through the hotplug entry's driver_data.
  */
-static int __devinit usb_hcd_at91_probe(const struct hc_driver *driver,
+static int usb_hcd_at91_probe(const struct hc_driver *driver,
                         struct platform_device *pdev)
 {
         int retval;
@@ -203,7 +203,7 @@ static int __devinit usb_hcd_at91_probe(const struct hc_driver *driver,
  * context, "rmmod" or something similar.
  *
  */
-static void __devexit usb_hcd_at91_remove(struct usb_hcd *hcd,
+static void usb_hcd_at91_remove(struct usb_hcd *hcd,
                                 struct platform_device *pdev)
 {
         usb_remove_hcd(hcd);
@@ -222,7 +222,7 @@ static void __devexit usb_hcd_at91_remove(struct usb_hcd *hcd,
 
 /*-------------------------------------------------------------------------*/
 
-static int __devinit
+static int
 ohci_at91_reset (struct usb_hcd *hcd)
 {
         struct at91_usbh_data   *board = hcd->self.controller->platform_data;
@@ -236,7 +236,7 @@ ohci_at91_reset (struct usb_hcd *hcd)
         return 0;
 }
 
-static int __devinit
+static int
 ohci_at91_start (struct usb_hcd *hcd)
 {
         struct ohci_hcd         *ohci = hcd_to_ohci (hcd);
@@ -506,7 +506,7 @@ MODULE_DEVICE_TABLE(of, at91_ohci_dt_ids);
 
 static u64 at91_ohci_dma_mask = DMA_BIT_MASK(32);
 
-static int __devinit ohci_at91_of_init(struct platform_device *pdev)
+static int ohci_at91_of_init(struct platform_device *pdev)
 {
         struct device_node *np = pdev->dev.of_node;
         int i, gpio;
@@ -548,7 +548,7 @@ static int __devinit ohci_at91_of_init(struct platform_device *pdev)
         return 0;
 }
 #else
-static int __devinit ohci_at91_of_init(struct platform_device *pdev)
+static int ohci_at91_of_init(struct platform_device *pdev)
 {
         return 0;
 }
@@ -556,7 +556,7 @@ static int __devinit ohci_at91_of_init(struct platform_device *pdev)
 
 /*-------------------------------------------------------------------------*/
 
-static int __devinit ohci_hcd_at91_drv_probe(struct platform_device *pdev)
+static int ohci_hcd_at91_drv_probe(struct platform_device *pdev)
 {
         struct at91_usbh_data   *pdata;
         int                     i;
@@ -641,7 +641,7 @@ static int __devinit ohci_hcd_at91_drv_probe(struct platform_device *pdev)
         return usb_hcd_at91_probe(&ohci_at91_hc_driver, pdev);
 }
 
-static int __devexit ohci_hcd_at91_drv_remove(struct platform_device *pdev)
+static int ohci_hcd_at91_drv_remove(struct platform_device *pdev)
 {
         struct at91_usbh_data   *pdata = pdev->dev.platform_data;
         int                     i;
@@ -705,7 +705,7 @@ static int ohci_hcd_at91_drv_resume(struct platform_device *pdev)
         if (!clocked)
                 at91_start_clock();
 
-        ohci_finish_controller_resume(hcd);
+        ohci_resume(hcd, false);
         return 0;
 }
 #else
@@ -717,7 +717,7 @@ MODULE_ALIAS("platform:at91_ohci");
 
 static struct platform_driver ohci_hcd_at91_driver = {
         .probe          = ohci_hcd_at91_drv_probe,
-        .remove         = __devexit_p(ohci_hcd_at91_drv_remove),
+        .remove         = ohci_hcd_at91_drv_remove,
         .shutdown       = usb_hcd_platform_shutdown,
         .suspend        = ohci_hcd_at91_drv_suspend,
         .resume         = ohci_hcd_at91_drv_resume,
diff --git a/drivers/usb/host/ohci-au1xxx.c b/drivers/usb/host/ohci-au1xxx.c
deleted file mode 100644
index c611699b4aa6..000000000000
--- a/drivers/usb/host/ohci-au1xxx.c
+++ /dev/null
@@ -1,234 +0,0 @@
-/*
- * OHCI HCD (Host Controller Driver) for USB.
- *
- * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
- * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
- * (C) Copyright 2002 Hewlett-Packard Company
- *
- * Bus Glue for AMD Alchemy Au1xxx
- *
- * Written by Christopher Hoover <ch@hpl.hp.com>
- * Based on fragments of previous driver by Russell King et al.
- *
- * Modified for LH7A404 from ohci-sa1111.c
- *  by Durgesh Pattamatta <pattamattad@sharpsec.com>
- * Modified for AMD Alchemy Au1xxx
- *  by Matt Porter <mporter@kernel.crashing.org>
- *
- * This file is licenced under the GPL.
- */
-
-#include <linux/platform_device.h>
-#include <linux/signal.h>
-
-#include <asm/mach-au1x00/au1000.h>
-
-
-extern int usb_disabled(void);
-
-static int __devinit ohci_au1xxx_start(struct usb_hcd *hcd)
-{
-        struct ohci_hcd *ohci = hcd_to_ohci(hcd);
-        int ret;
-
-        ohci_dbg(ohci, "ohci_au1xxx_start, ohci:%p", ohci);
-
-        if ((ret = ohci_init(ohci)) < 0)
-                return ret;
-
-        if ((ret = ohci_run(ohci)) < 0) {
-                dev_err(hcd->self.controller, "can't start %s",
-                        hcd->self.bus_name);
-                ohci_stop(hcd);
-                return ret;
-        }
-
-        return 0;
-}
-
-static const struct hc_driver ohci_au1xxx_hc_driver = {
-        .description =          hcd_name,
-        .product_desc =         "Au1xxx OHCI",
-        .hcd_priv_size =        sizeof(struct ohci_hcd),
-
-        /*
-         * generic hardware linkage
-         */
-        .irq =                  ohci_irq,
-        .flags =                HCD_USB11 | HCD_MEMORY,
-
-        /*
-         * basic lifecycle operations
-         */
-        .start =                ohci_au1xxx_start,
-        .stop =                 ohci_stop,
-        .shutdown =             ohci_shutdown,
-
-        /*
-         * managing i/o requests and associated device resources
-         */
-        .urb_enqueue =          ohci_urb_enqueue,
-        .urb_dequeue =          ohci_urb_dequeue,
-        .endpoint_disable =     ohci_endpoint_disable,
-
-        /*
-         * scheduling support
-         */
-        .get_frame_number =     ohci_get_frame,
-
-        /*
-         * root hub support
-         */
-        .hub_status_data =      ohci_hub_status_data,
-        .hub_control =          ohci_hub_control,
-#ifdef  CONFIG_PM
-        .bus_suspend =          ohci_bus_suspend,
-        .bus_resume =           ohci_bus_resume,
-#endif
-        .start_port_reset =     ohci_start_port_reset,
-};
-
-static int ohci_hcd_au1xxx_drv_probe(struct platform_device *pdev)
-{
-        int ret, unit;
-        struct usb_hcd *hcd;
-
-        if (usb_disabled())
-                return -ENODEV;
-
-        if (pdev->resource[1].flags != IORESOURCE_IRQ) {
-                pr_debug("resource[1] is not IORESOURCE_IRQ\n");
-                return -ENOMEM;
-        }
-
-        hcd = usb_create_hcd(&ohci_au1xxx_hc_driver, &pdev->dev, "au1xxx");
-        if (!hcd)
-                return -ENOMEM;
-
-        hcd->rsrc_start = pdev->resource[0].start;
-        hcd->rsrc_len = pdev->resource[0].end - pdev->resource[0].start + 1;
-
-        if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
-                pr_debug("request_mem_region failed\n");
-                ret = -EBUSY;
-                goto err1;
-        }
-
-        hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
-        if (!hcd->regs) {
-                pr_debug("ioremap failed\n");
-                ret = -ENOMEM;
-                goto err2;
-        }
-
-        unit = (hcd->rsrc_start == AU1300_USB_OHCI1_PHYS_ADDR) ?
-                        ALCHEMY_USB_OHCI1 : ALCHEMY_USB_OHCI0;
-        if (alchemy_usb_control(unit, 1)) {
-                printk(KERN_INFO "%s: controller init failed!\n", pdev->name);
-                ret = -ENODEV;
-                goto err3;
-        }
-
-        ohci_hcd_init(hcd_to_ohci(hcd));
-
-        ret = usb_add_hcd(hcd, pdev->resource[1].start,
-                          IRQF_SHARED);
-        if (ret == 0) {
-                platform_set_drvdata(pdev, hcd);
-                return ret;
-        }
-
-        alchemy_usb_control(unit, 0);
-err3:
-        iounmap(hcd->regs);
-err2:
-        release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
-err1:
-        usb_put_hcd(hcd);
-        return ret;
-}
-
-static int ohci_hcd_au1xxx_drv_remove(struct platform_device *pdev)
-{
-        struct usb_hcd *hcd = platform_get_drvdata(pdev);
-        int unit;
-
-        unit = (hcd->rsrc_start == AU1300_USB_OHCI1_PHYS_ADDR) ?
-                        ALCHEMY_USB_OHCI1 : ALCHEMY_USB_OHCI0;
-        usb_remove_hcd(hcd);
-        alchemy_usb_control(unit, 0);
-        iounmap(hcd->regs);
-        release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
-        usb_put_hcd(hcd);
-        platform_set_drvdata(pdev, NULL);
-
-        return 0;
-}
-
-#ifdef CONFIG_PM
-static int ohci_hcd_au1xxx_drv_suspend(struct device *dev)
-{
-        struct usb_hcd *hcd = dev_get_drvdata(dev);
-        struct ohci_hcd *ohci = hcd_to_ohci(hcd);
-        unsigned long flags;
-        int rc;
-
-        rc = 0;
-
-        /* Root hub was already suspended. Disable irq emission and
-         * mark HW unaccessible, bail out if RH has been resumed. Use
-         * the spinlock to properly synchronize with possible pending
-         * RH suspend or resume activity.
-         */
-        spin_lock_irqsave(&ohci->lock, flags);
-        if (ohci->rh_state != OHCI_RH_SUSPENDED) {
-                rc = -EINVAL;
-                goto bail;
-        }
-        ohci_writel(ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable);
-        (void)ohci_readl(ohci, &ohci->regs->intrdisable);
-
-        clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
-
-        alchemy_usb_control(ALCHEMY_USB_OHCI0, 0);
-bail:
-        spin_unlock_irqrestore(&ohci->lock, flags);
-
-        return rc;
-}
-
-static int ohci_hcd_au1xxx_drv_resume(struct device *dev)
-{
-        struct usb_hcd *hcd = dev_get_drvdata(dev);
-
-        alchemy_usb_control(ALCHEMY_USB_OHCI0, 1);
-
-        set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
-        ohci_finish_controller_resume(hcd);
-
-        return 0;
-}
-
-static const struct dev_pm_ops au1xxx_ohci_pmops = {
-        .suspend        = ohci_hcd_au1xxx_drv_suspend,
-        .resume         = ohci_hcd_au1xxx_drv_resume,
-};
-
-#define AU1XXX_OHCI_PMOPS &au1xxx_ohci_pmops
-
-#else
-#define AU1XXX_OHCI_PMOPS NULL
-#endif
-
-static struct platform_driver ohci_hcd_au1xxx_driver = {
-        .probe          = ohci_hcd_au1xxx_drv_probe,
-        .remove         = ohci_hcd_au1xxx_drv_remove,
-        .shutdown       = usb_hcd_platform_shutdown,
-        .driver         = {
-                .name   = "au1xxx-ohci",
-                .owner  = THIS_MODULE,
-                .pm     = AU1XXX_OHCI_PMOPS,
-        },
-};
-
-MODULE_ALIAS("platform:au1xxx-ohci");
diff --git a/drivers/usb/host/ohci-cns3xxx.c b/drivers/usb/host/ohci-cns3xxx.c
deleted file mode 100644
index 2c9f233047be..000000000000
--- a/drivers/usb/host/ohci-cns3xxx.c
+++ /dev/null
@@ -1,166 +0,0 @@
-/*
- * Copyright 2008 Cavium Networks
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License, Version 2, as
- * published by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-#include <linux/atomic.h>
-#include <mach/cns3xxx.h>
-#include <mach/pm.h>
-
-static int __devinit
-cns3xxx_ohci_start(struct usb_hcd *hcd)
-{
-        struct ohci_hcd *ohci = hcd_to_ohci(hcd);
-        int ret;
-
-        /*
-         * EHCI and OHCI share the same clock and power,
-         * resetting twice would cause the 1st controller been reset.
-         * Therefore only do power up  at the first up device, and
-         * power down at the last down device.
-         *
-         * Set USB AHB INCR length to 16
-         */
-        if (atomic_inc_return(&usb_pwr_ref) == 1) {
-                cns3xxx_pwr_power_up(1 << PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_USB);
-                cns3xxx_pwr_clk_en(1 << PM_CLK_GATE_REG_OFFSET_USB_HOST);
-                cns3xxx_pwr_soft_rst(1 << PM_SOFT_RST_REG_OFFST_USB_HOST);
-                __raw_writel((__raw_readl(MISC_CHIP_CONFIG_REG) | (0X2 << 24)),
-                        MISC_CHIP_CONFIG_REG);
-        }
-
-        ret = ohci_init(ohci);
-        if (ret < 0)
-                return ret;
-
-        ohci->num_ports = 1;
-
-        ret = ohci_run(ohci);
-        if (ret < 0) {
-                dev_err(hcd->self.controller, "can't start %s\n",
-                        hcd->self.bus_name);
-                ohci_stop(hcd);
-                return ret;
-        }
-        return 0;
-}
-
-static const struct hc_driver cns3xxx_ohci_hc_driver = {
-        .description            = hcd_name,
-        .product_desc           = "CNS3XXX OHCI Host controller",
-        .hcd_priv_size          = sizeof(struct ohci_hcd),
-        .irq                    = ohci_irq,
-        .flags                  = HCD_USB11 | HCD_MEMORY,
-        .start                  = cns3xxx_ohci_start,
-        .stop                   = ohci_stop,
-        .shutdown               = ohci_shutdown,
-        .urb_enqueue            = ohci_urb_enqueue,
-        .urb_dequeue            = ohci_urb_dequeue,
-        .endpoint_disable       = ohci_endpoint_disable,
-        .get_frame_number       = ohci_get_frame,
-        .hub_status_data        = ohci_hub_status_data,
-        .hub_control            = ohci_hub_control,
-#ifdef CONFIG_PM
-        .bus_suspend            = ohci_bus_suspend,
-        .bus_resume             = ohci_bus_resume,
-#endif
-        .start_port_reset       = ohci_start_port_reset,
-};
-
-static int cns3xxx_ohci_probe(struct platform_device *pdev)
-{
-        struct device *dev = &pdev->dev;
-        struct usb_hcd *hcd;
-        const struct hc_driver *driver = &cns3xxx_ohci_hc_driver;
-        struct resource *res;
-        int irq;
-        int retval;
-
-        if (usb_disabled())
-                return -ENODEV;
-
-        res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-        if (!res) {
-                dev_err(dev, "Found HC with no IRQ.\n");
-                return -ENODEV;
-        }
-        irq = res->start;
-
-        hcd = usb_create_hcd(driver, dev, dev_name(dev));
-        if (!hcd)
-                return -ENOMEM;
-
-        res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-        if (!res) {
-                dev_err(dev, "Found HC with no register addr.\n");
-                retval = -ENODEV;
-                goto err1;
-        }
-        hcd->rsrc_start = res->start;
-        hcd->rsrc_len = resource_size(res);
-
-        if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len,
-                        driver->description)) {
-                dev_dbg(dev, "controller already in use\n");
-                retval = -EBUSY;
-                goto err1;
-        }
-
-        hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
-        if (!hcd->regs) {
-                dev_dbg(dev, "error mapping memory\n");
-                retval = -EFAULT;
-                goto err2;
-        }
-
-        ohci_hcd_init(hcd_to_ohci(hcd));
-
-        retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
-        if (retval == 0)
-                return retval;
-
-        iounmap(hcd->regs);
-err2:
-        release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
-err1:
-        usb_put_hcd(hcd);
-        return retval;
-}
-
-static int cns3xxx_ohci_remove(struct platform_device *pdev)
-{
-        struct usb_hcd *hcd = platform_get_drvdata(pdev);
-
-        usb_remove_hcd(hcd);
-        iounmap(hcd->regs);
-        release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
-
-        /*
-         * EHCI and OHCI share the same clock and power,
-         * resetting twice would cause the 1st controller been reset.
-         * Therefore only do power up  at the first up device, and
-         * power down at the last down device.
-         */
-        if (atomic_dec_return(&usb_pwr_ref) == 0)
-                cns3xxx_pwr_clk_dis(1 << PM_CLK_GATE_REG_OFFSET_USB_HOST);
-
-        usb_put_hcd(hcd);
-
-        platform_set_drvdata(pdev, NULL);
-
-        return 0;
-}
-
-MODULE_ALIAS("platform:cns3xxx-ohci");
-
-static struct platform_driver ohci_hcd_cns3xxx_driver = {
-        .probe = cns3xxx_ohci_probe,
-        .remove = cns3xxx_ohci_remove,
-        .driver = {
-                .name = "cns3xxx-ohci",
-        },
-};
diff --git a/drivers/usb/host/ohci-ep93xx.c b/drivers/usb/host/ohci-ep93xx.c
index dbfbd1dfd2e2..8704e9fa5a80 100644
--- a/drivers/usb/host/ohci-ep93xx.c
+++ b/drivers/usb/host/ohci-ep93xx.c
@@ -107,7 +107,7 @@ static void usb_hcd_ep93xx_remove(struct usb_hcd *hcd,
         usb_put_hcd(hcd);
 }
 
-static int __devinit ohci_ep93xx_start(struct usb_hcd *hcd)
+static int ohci_ep93xx_start(struct usb_hcd *hcd)
 {
         struct ohci_hcd *ohci = hcd_to_ohci(hcd);
         int ret;
@@ -194,7 +194,7 @@ static int ohci_hcd_ep93xx_drv_resume(struct platform_device *pdev)
 
         ep93xx_start_hc(&pdev->dev);
 
-        ohci_finish_controller_resume(hcd);
+        ohci_resume(hcd, false);
         return 0;
 }
 #endif
diff --git a/drivers/usb/host/ohci-exynos.c b/drivers/usb/host/ohci-exynos.c
index 20a50081f922..aa3b8844bb9f 100644
--- a/drivers/usb/host/ohci-exynos.c
+++ b/drivers/usb/host/ohci-exynos.c
@@ -23,6 +23,11 @@ struct exynos_ohci_hcd {
         struct clk *clk;
 };
 
+static int ohci_exynos_reset(struct usb_hcd *hcd)
+{
+        return ohci_init(hcd_to_ohci(hcd));
+}
+
 static int ohci_exynos_start(struct usb_hcd *hcd)
 {
         struct ohci_hcd *ohci = hcd_to_ohci(hcd);
@@ -30,10 +35,6 @@ static int ohci_exynos_start(struct usb_hcd *hcd)
 
         ohci_dbg(ohci, "ohci_exynos_start, ohci:%p", ohci);
 
-        ret = ohci_init(ohci);
-        if (ret < 0)
-                return ret;
-
         ret = ohci_run(ohci);
         if (ret < 0) {
                 dev_err(hcd->self.controller, "can't start %s\n",
@@ -53,6 +54,7 @@ static const struct hc_driver exynos_ohci_hc_driver = {
         .irq                    = ohci_irq,
         .flags                  = HCD_MEMORY|HCD_USB11,
 
+        .reset                  = ohci_exynos_reset,
         .start                  = ohci_exynos_start,
         .stop                   = ohci_stop,
         .shutdown               = ohci_shutdown,
@@ -74,7 +76,7 @@ static const struct hc_driver exynos_ohci_hc_driver = {
 
 static u64 ohci_exynos_dma_mask = DMA_BIT_MASK(32);
 
-static int __devinit exynos_ohci_probe(struct platform_device *pdev)
+static int exynos_ohci_probe(struct platform_device *pdev)
 {
         struct exynos4_ohci_platdata *pdata;
         struct exynos_ohci_hcd *exynos_ohci;
@@ -115,7 +117,7 @@ static int __devinit exynos_ohci_probe(struct platform_device *pdev)
         }
 
         exynos_ohci->hcd = hcd;
-        exynos_ohci->clk = clk_get(&pdev->dev, "usbhost");
+        exynos_ohci->clk = devm_clk_get(&pdev->dev, "usbhost");
 
         if (IS_ERR(exynos_ohci->clk)) {
                 dev_err(&pdev->dev, "Failed to get usbhost clock\n");
@@ -123,9 +125,9 @@ static int __devinit exynos_ohci_probe(struct platform_device *pdev)
                 goto fail_clk;
         }
 
-        err = clk_enable(exynos_ohci->clk);
+        err = clk_prepare_enable(exynos_ohci->clk);
         if (err)
-                goto fail_clken;
+                goto fail_clk;
 
         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
         if (!res) {
@@ -167,15 +169,13 @@ static int __devinit exynos_ohci_probe(struct platform_device *pdev)
         return 0;
 
 fail_io:
-        clk_disable(exynos_ohci->clk);
-fail_clken:
-        clk_put(exynos_ohci->clk);
+        clk_disable_unprepare(exynos_ohci->clk);
 fail_clk:
         usb_put_hcd(hcd);
         return err;
 }
 
-static int __devexit exynos_ohci_remove(struct platform_device *pdev)
+static int exynos_ohci_remove(struct platform_device *pdev)
 {
         struct exynos4_ohci_platdata *pdata = pdev->dev.platform_data;
         struct exynos_ohci_hcd *exynos_ohci = platform_get_drvdata(pdev);
@@ -186,8 +186,7 @@ static int __devexit exynos_ohci_remove(struct platform_device *pdev)
         if (pdata && pdata->phy_exit)
                 pdata->phy_exit(pdev, S5P_USB_PHY_HOST);
 
-        clk_disable(exynos_ohci->clk);
-        clk_put(exynos_ohci->clk);
+        clk_disable_unprepare(exynos_ohci->clk);
 
         usb_put_hcd(hcd);
 
@@ -232,7 +231,7 @@ static int exynos_ohci_suspend(struct device *dev)
         if (pdata && pdata->phy_exit)
                 pdata->phy_exit(pdev, S5P_USB_PHY_HOST);
 
-        clk_disable(exynos_ohci->clk);
+        clk_disable_unprepare(exynos_ohci->clk);
 
 fail:
         spin_unlock_irqrestore(&ohci->lock, flags);
@@ -247,15 +246,12 @@ static int exynos_ohci_resume(struct device *dev)
         struct platform_device *pdev = to_platform_device(dev);
         struct exynos4_ohci_platdata *pdata = pdev->dev.platform_data;
 
-        clk_enable(exynos_ohci->clk);
+        clk_prepare_enable(exynos_ohci->clk);
 
         if (pdata && pdata->phy_init)
                 pdata->phy_init(pdev, S5P_USB_PHY_HOST);
 
-        /* Mark hardware accessible again as we are out of D3 state by now */
-        set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
-
-        ohci_finish_controller_resume(hcd);
+        ohci_resume(hcd, false);
 
         return 0;
 }
@@ -279,7 +275,7 @@ MODULE_DEVICE_TABLE(of, exynos_ohci_match);
 
 static struct platform_driver exynos_ohci_driver = {
         .probe          = exynos_ohci_probe,
-        .remove         = __devexit_p(exynos_ohci_remove),
+        .remove         = exynos_ohci_remove,
         .shutdown       = exynos_ohci_shutdown,
         .driver = {
                 .name   = "exynos-ohci",
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index 4a1d64d92338..180a2b01db56 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -231,13 +231,41 @@ static int ohci_urb_enqueue (
                         frame &= ~(ed->interval - 1);
                         frame |= ed->branch;
                         urb->start_frame = frame;
+                }
+        } else if (ed->type == PIPE_ISOCHRONOUS) {
+                u16     next = ohci_frame_no(ohci) + 2;
+                u16     frame = ed->last_iso + ed->interval;
+
+                /* Behind the scheduling threshold? */
+                if (unlikely(tick_before(frame, next))) {
 
-                        /* yes, only URB_ISO_ASAP is supported, and
-                         * urb->start_frame is never used as input.
+                        /* USB_ISO_ASAP: Round up to the first available slot */
+                        if (urb->transfer_flags & URB_ISO_ASAP)
+                                frame += (next - frame + ed->interval - 1) &
+                                                -ed->interval;
+
+                        /*
+                         * Not ASAP: Use the next slot in the stream.  If
+                         * the entire URB falls before the threshold, fail.
                          */
+                        else if (tick_before(frame + ed->interval *
+                                        (urb->number_of_packets - 1), next)) {
+                                retval = -EXDEV;
+                                usb_hcd_unlink_urb_from_ep(hcd, urb);
+                                goto fail;
+                        }
+
+                        /*
+                         * Some OHCI hardware doesn't handle late TDs
+                         * correctly.  After retiring them it proceeds to
+                         * the next ED instead of the next TD.  Therefore
+                         * we have to omit the late TDs entirely.
+                         */
+                        urb_priv->td_cnt = DIV_ROUND_UP(next - frame,
+                                        ed->interval);
                 }
-        } else if (ed->type == PIPE_ISOCHRONOUS)
-                urb->start_frame = ed->last_iso + ed->interval;
+                urb->start_frame = frame;
+        }
 
         /* fill the TDs and link them to the ed; and
          * enable that part of the schedule, if needed
@@ -983,6 +1011,79 @@ static int ohci_restart (struct ohci_hcd *ohci)
 
 #endif
 
+#ifdef CONFIG_PM
+
+static int __maybe_unused ohci_suspend(struct usb_hcd *hcd, bool do_wakeup)
+{
+        struct ohci_hcd *ohci = hcd_to_ohci (hcd);
+        unsigned long   flags;
+
+        /* Disable irq emission and mark HW unaccessible. Use
+         * the spinlock to properly synchronize with possible pending
+         * RH suspend or resume activity.
+         */
+        spin_lock_irqsave (&ohci->lock, flags);
+        ohci_writel(ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable);
+        (void)ohci_readl(ohci, &ohci->regs->intrdisable);
+
+        clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+        spin_unlock_irqrestore (&ohci->lock, flags);
+
+        return 0;
+}
+
+
+static int __maybe_unused ohci_resume(struct usb_hcd *hcd, bool hibernated)
+{
+        struct ohci_hcd         *ohci = hcd_to_ohci(hcd);
+        int                     port;
+        bool                    need_reinit = false;
+
+        set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+
+        /* Make sure resume from hibernation re-enumerates everything */
+        if (hibernated)
+                ohci_usb_reset(ohci);
+
+        /* See if the controller is already running or has been reset */
+        ohci->hc_control = ohci_readl(ohci, &ohci->regs->control);
+        if (ohci->hc_control & (OHCI_CTRL_IR | OHCI_SCHED_ENABLES)) {
+                need_reinit = true;
+        } else {
+                switch (ohci->hc_control & OHCI_CTRL_HCFS) {
+                case OHCI_USB_OPER:
+                case OHCI_USB_RESET:
+                        need_reinit = true;
+                }
+        }
+
+        /* If needed, reinitialize and suspend the root hub */
+        if (need_reinit) {
+                spin_lock_irq(&ohci->lock);
+                ohci_rh_resume(ohci);
+                ohci_rh_suspend(ohci, 0);
+                spin_unlock_irq(&ohci->lock);
+        }
+
+        /* Normally just turn on port power and enable interrupts */
+        else {
+                ohci_dbg(ohci, "powerup ports\n");
+                for (port = 0; port < ohci->num_ports; port++)
+                        ohci_writel(ohci, RH_PS_PPS,
+                                        &ohci->regs->roothub.portstatus[port]);
+
+                ohci_writel(ohci, OHCI_INTR_MIE, &ohci->regs->intrenable);
+                ohci_readl(ohci, &ohci->regs->intrenable);
+                msleep(20);
+        }
+
+        usb_hcd_resume_root_hub(hcd);
+
+        return 0;
+}
+
+#endif
+
 /*-------------------------------------------------------------------------*/
 
 MODULE_AUTHOR (DRIVER_AUTHOR);
@@ -1029,21 +1130,6 @@ MODULE_LICENSE ("GPL");
 #define PLATFORM_DRIVER         ohci_hcd_ep93xx_driver
 #endif
 
-#ifdef CONFIG_MIPS_ALCHEMY
-#include "ohci-au1xxx.c"
-#define PLATFORM_DRIVER         ohci_hcd_au1xxx_driver
-#endif
-
-#ifdef CONFIG_PNX8550
-#include "ohci-pnx8550.c"
-#define PLATFORM_DRIVER         ohci_hcd_pnx8550_driver
-#endif
-
-#ifdef CONFIG_USB_OHCI_HCD_PPC_SOC
-#include "ohci-ppc-soc.c"
-#define PLATFORM_DRIVER         ohci_hcd_ppc_soc_driver
-#endif
-
 #ifdef CONFIG_ARCH_AT91
 #include "ohci-at91.c"
 #define PLATFORM_DRIVER         ohci_hcd_at91_driver
@@ -1059,11 +1145,6 @@ MODULE_LICENSE ("GPL");
 #define PLATFORM_DRIVER         ohci_hcd_da8xx_driver
 #endif
 
-#ifdef CONFIG_USB_OHCI_SH
-#include "ohci-sh.c"
-#define PLATFORM_DRIVER         ohci_hcd_sh_driver
-#endif
-
 
 #ifdef CONFIG_USB_OHCI_HCD_PPC_OF
 #include "ohci-ppc-of.c"
@@ -1105,16 +1186,6 @@ MODULE_LICENSE ("GPL");
 #define PLATFORM_DRIVER         ohci_hcd_tilegx_driver
 #endif
 
-#ifdef CONFIG_USB_CNS3XXX_OHCI
-#include "ohci-cns3xxx.c"
-#define PLATFORM_DRIVER         ohci_hcd_cns3xxx_driver
-#endif
-
-#ifdef CONFIG_CPU_XLR
-#include "ohci-xls.c"
-#define PLATFORM_DRIVER         ohci_xls_driver
-#endif
-
 #ifdef CONFIG_USB_OHCI_HCD_PLATFORM
 #include "ohci-platform.c"
 #define PLATFORM_DRIVER         ohci_platform_driver
diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c
index 2f3619eefefa..db09dae7b557 100644
--- a/drivers/usb/host/ohci-hub.c
+++ b/drivers/usb/host/ohci-hub.c
@@ -316,48 +316,6 @@ static int ohci_bus_resume (struct usb_hcd *hcd)
         return rc;
 }
 
-/* Carry out the final steps of resuming the controller device */
-static void __maybe_unused ohci_finish_controller_resume(struct usb_hcd *hcd)
-{
-        struct ohci_hcd         *ohci = hcd_to_ohci(hcd);
-        int                     port;
-        bool                    need_reinit = false;
-
-        /* See if the controller is already running or has been reset */
-        ohci->hc_control = ohci_readl(ohci, &ohci->regs->control);
-        if (ohci->hc_control & (OHCI_CTRL_IR | OHCI_SCHED_ENABLES)) {
-                need_reinit = true;
-        } else {
-                switch (ohci->hc_control & OHCI_CTRL_HCFS) {
-                case OHCI_USB_OPER:
-                case OHCI_USB_RESET:
-                        need_reinit = true;
-                }
-        }
-
-        /* If needed, reinitialize and suspend the root hub */
-        if (need_reinit) {
-                spin_lock_irq(&ohci->lock);
-                ohci_rh_resume(ohci);
-                ohci_rh_suspend(ohci, 0);
-                spin_unlock_irq(&ohci->lock);
-        }
-
-        /* Normally just turn on port power and enable interrupts */
-        else {
-                ohci_dbg(ohci, "powerup ports\n");
-                for (port = 0; port < ohci->num_ports; port++)
-                        ohci_writel(ohci, RH_PS_PPS,
-                                        &ohci->regs->roothub.portstatus[port]);
-
-                ohci_writel(ohci, OHCI_INTR_MIE, &ohci->regs->intrenable);
-                ohci_readl(ohci, &ohci->regs->intrenable);
-                msleep(20);
-        }
-
-        usb_hcd_resume_root_hub(hcd);
-}
-
 /* Carry out polling-, autostop-, and autoresume-related state changes */
 static int ohci_root_hub_state_changes(struct ohci_hcd *ohci, int changed,
                 int any_connected, int rhsc_status)
diff --git a/drivers/usb/host/ohci-jz4740.c b/drivers/usb/host/ohci-jz4740.c
index 931d588c3fb5..8062bb9dea16 100644
--- a/drivers/usb/host/ohci-jz4740.c
+++ b/drivers/usb/host/ohci-jz4740.c
@@ -145,7 +145,7 @@ static const struct hc_driver ohci_jz4740_hc_driver = {
 };
 
 
-static __devinit int jz4740_ohci_probe(struct platform_device *pdev)
+static int jz4740_ohci_probe(struct platform_device *pdev)
 {
         int ret;
         struct usb_hcd *hcd;
@@ -239,7 +239,7 @@ err_free:
         return ret;
 }
 
-static __devexit int jz4740_ohci_remove(struct platform_device *pdev)
+static int jz4740_ohci_remove(struct platform_device *pdev)
 {
         struct usb_hcd *hcd = platform_get_drvdata(pdev);
         struct jz4740_ohci_hcd *jz4740_ohci = hcd_to_jz4740_hcd(hcd);
@@ -266,7 +266,7 @@ static __devexit int jz4740_ohci_remove(struct platform_device *pdev)
 
 static struct platform_driver ohci_hcd_jz4740_driver = {
         .probe = jz4740_ohci_probe,
-        .remove = __devexit_p(jz4740_ohci_remove),
+        .remove = jz4740_ohci_remove,
         .driver = {
                 .name = "jz4740-ohci",
                 .owner = THIS_MODULE,
diff --git a/drivers/usb/host/ohci-nxp.c b/drivers/usb/host/ohci-nxp.c
index e068f034cb9b..2344040c16d2 100644
--- a/drivers/usb/host/ohci-nxp.c
+++ b/drivers/usb/host/ohci-nxp.c
@@ -147,7 +147,7 @@ static void nxp_stop_hc(void)
         __raw_writel(tmp, USB_OTG_STAT_CONTROL);
 }
 
-static int __devinit ohci_nxp_start(struct usb_hcd *hcd)
+static int ohci_nxp_start(struct usb_hcd *hcd)
 {
         struct ohci_hcd *ohci = hcd_to_ohci(hcd);
         int ret;
@@ -205,7 +205,7 @@ static const struct hc_driver ohci_nxp_hc_driver = {
         .start_port_reset = ohci_start_port_reset,
 };
 
-static int __devinit usb_hcd_nxp_probe(struct platform_device *pdev)
+static int usb_hcd_nxp_probe(struct platform_device *pdev)
 {
         struct usb_hcd *hcd = 0;
         struct ohci_hcd *ohci;
diff --git a/drivers/usb/host/ohci-octeon.c b/drivers/usb/host/ohci-octeon.c
index d469bf9b9e54..d44430d009f8 100644
--- a/drivers/usb/host/ohci-octeon.c
+++ b/drivers/usb/host/ohci-octeon.c
@@ -42,7 +42,7 @@ static void ohci_octeon_hw_stop(void)
         octeon2_usb_clocks_stop();
 }
 
-static int __devinit ohci_octeon_start(struct usb_hcd *hcd)
+static int ohci_octeon_start(struct usb_hcd *hcd)
 {
         struct ohci_hcd *ohci = hcd_to_ohci(hcd);
         int ret;
diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c
index 4531d03503c3..b1d32fb4a7ae 100644
--- a/drivers/usb/host/ohci-omap.c
+++ b/drivers/usb/host/ohci-omap.c
@@ -25,7 +25,6 @@
 #include <asm/mach-types.h>
 
 #include <mach/mux.h>
-#include <plat/fpga.h>
 
 #include <mach/hardware.h>
 #include <mach/irqs.h>
@@ -93,14 +92,14 @@ static int omap_ohci_transceiver_power(int on)
 {
         if (on) {
                 if (machine_is_omap_innovator() && cpu_is_omap1510())
-                        fpga_write(fpga_read(INNOVATOR_FPGA_CAM_USB_CONTROL)
+                        __raw_writeb(__raw_readb(INNOVATOR_FPGA_CAM_USB_CONTROL)
                                 | ((1 << 5/*usb1*/) | (1 << 3/*usb2*/)),
                                INNOVATOR_FPGA_CAM_USB_CONTROL);
                 else if (machine_is_omap_osk())
                         tps65010_set_gpio_out_value(GPIO1, LOW);
         } else {
                 if (machine_is_omap_innovator() && cpu_is_omap1510())
-                        fpga_write(fpga_read(INNOVATOR_FPGA_CAM_USB_CONTROL)
+                        __raw_writeb(__raw_readb(INNOVATOR_FPGA_CAM_USB_CONTROL)
                                 & ~((1 << 5/*usb1*/) | (1 << 3/*usb2*/)),
                                INNOVATOR_FPGA_CAM_USB_CONTROL);
                 else if (machine_is_omap_osk())
@@ -530,7 +529,7 @@ static int ohci_omap_resume(struct platform_device *dev)
         ohci->next_statechange = jiffies;
 
         omap_ohci_clock_power(1);
-        ohci_finish_controller_resume(hcd);
+        ohci_resume(hcd, false);
         return 0;
 }
 
diff --git a/drivers/usb/host/ohci-omap3.c b/drivers/usb/host/ohci-omap3.c
index 1b8133b6e451..eb35d9630237 100644
--- a/drivers/usb/host/ohci-omap3.c
+++ b/drivers/usb/host/ohci-omap3.c
@@ -30,7 +30,6 @@
  */
 
 #include <linux/platform_device.h>
-#include <plat/usb.h>
 #include <linux/pm_runtime.h>
 
 /*-------------------------------------------------------------------------*/
@@ -125,7 +124,7 @@ static const struct hc_driver ohci_omap3_hc_driver = {
  * then invokes the start() method for the HCD associated with it
  * through the hotplug entry's driver_data.
  */
-static int __devinit ohci_hcd_omap3_probe(struct platform_device *pdev)
+static int ohci_hcd_omap3_probe(struct platform_device *pdev)
 {
         struct device           *dev = &pdev->dev;
         struct usb_hcd          *hcd = NULL;
@@ -209,7 +208,7 @@ err_io:
  * the HCD's stop() method.  It is always called from a thread
  * context, normally "rmmod", "apmd", or something similar.
  */
-static int __devexit ohci_hcd_omap3_remove(struct platform_device *pdev)
+static int ohci_hcd_omap3_remove(struct platform_device *pdev)
 {
         struct device *dev      = &pdev->dev;
         struct usb_hcd *hcd     = dev_get_drvdata(dev);
@@ -232,7 +231,7 @@ static void ohci_hcd_omap3_shutdown(struct platform_device *pdev)
 
 static struct platform_driver ohci_hcd_omap3_driver = {
         .probe          = ohci_hcd_omap3_probe,
-        .remove         = __devexit_p(ohci_hcd_omap3_remove),
+        .remove         = ohci_hcd_omap3_remove,
         .shutdown       = ohci_hcd_omap3_shutdown,
         .driver         = {
                 .name   = "ohci-omap3",
diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c
index 1843bb68ac7c..951514ef446d 100644
--- a/drivers/usb/host/ohci-pci.c
+++ b/drivers/usb/host/ohci-pci.c
@@ -270,7 +270,7 @@ static int ohci_pci_reset (struct usb_hcd *hcd)
 }
 
 
-static int __devinit ohci_pci_start (struct usb_hcd *hcd)
+static int ohci_pci_start (struct usb_hcd *hcd)
 {
         struct ohci_hcd *ohci = hcd_to_ohci (hcd);
         int             ret;
@@ -296,49 +296,6 @@ static int __devinit ohci_pci_start (struct usb_hcd *hcd)
         return ret;
 }
 
-#ifdef  CONFIG_PM
-
-static int ohci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
-{
-        struct ohci_hcd *ohci = hcd_to_ohci (hcd);
-        unsigned long   flags;
-        int             rc = 0;
-
-        /* Root hub was already suspended. Disable irq emission and
-         * mark HW unaccessible, bail out if RH has been resumed. Use
-         * the spinlock to properly synchronize with possible pending
-         * RH suspend or resume activity.
-         */
-        spin_lock_irqsave (&ohci->lock, flags);
-        if (ohci->rh_state != OHCI_RH_SUSPENDED) {
-                rc = -EINVAL;
-                goto bail;
-        }
-        ohci_writel(ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable);
-        (void)ohci_readl(ohci, &ohci->regs->intrdisable);
-
-        clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
- bail:
-        spin_unlock_irqrestore (&ohci->lock, flags);
-
-        return rc;
-}
-
-
-static int ohci_pci_resume(struct usb_hcd *hcd, bool hibernated)
-{
-        set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
-
-        /* Make sure resume from hibernation re-enumerates everything */
-        if (hibernated)
-                ohci_usb_reset(hcd_to_ohci(hcd));
-
-        ohci_finish_controller_resume(hcd);
-        return 0;
-}
-
-#endif  /* CONFIG_PM */
-
 
 /*-------------------------------------------------------------------------*/
 
@@ -362,8 +319,8 @@ static const struct hc_driver ohci_pci_hc_driver = {
         .shutdown =             ohci_shutdown,
 
 #ifdef  CONFIG_PM
-        .pci_suspend =          ohci_pci_suspend,
-        .pci_resume =           ohci_pci_resume,
+        .pci_suspend =          ohci_suspend,
+        .pci_resume =           ohci_resume,
 #endif
 
         /*
diff --git a/drivers/usb/host/ohci-platform.c b/drivers/usb/host/ohci-platform.c
index e24ec9f79164..084503b03fcf 100644
--- a/drivers/usb/host/ohci-platform.c
+++ b/drivers/usb/host/ohci-platform.c
@@ -31,6 +31,10 @@ static int ohci_platform_reset(struct usb_hcd *hcd)
                 ohci->flags |= OHCI_QUIRK_FRAME_NO;
 
         ohci_hcd_init(ohci);
+
+        if (pdata->num_ports)
+                ohci->num_ports = pdata->num_ports;
+
         err = ohci_init(ohci);
 
         return err;
@@ -79,7 +83,7 @@ static const struct hc_driver ohci_platform_hc_driver = {
         .start_port_reset       = ohci_start_port_reset,
 };
 
-static int __devinit ohci_platform_probe(struct platform_device *dev)
+static int ohci_platform_probe(struct platform_device *dev)
 {
         struct usb_hcd *hcd;
         struct resource *res_mem;
@@ -97,13 +101,13 @@ static int __devinit ohci_platform_probe(struct platform_device *dev)
 
         irq = platform_get_irq(dev, 0);
         if (irq < 0) {
-                pr_err("no irq provided");
+                dev_err(&dev->dev, "no irq provided");
                 return irq;
         }
 
         res_mem = platform_get_resource(dev, IORESOURCE_MEM, 0);
         if (!res_mem) {
-                pr_err("no memory recourse provided");
+                dev_err(&dev->dev, "no memory resource provided");
                 return -ENXIO;
         }
 
@@ -123,29 +127,19 @@ static int __devinit ohci_platform_probe(struct platform_device *dev)
         hcd->rsrc_start = res_mem->start;
         hcd->rsrc_len = resource_size(res_mem);
 
-        if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
-                pr_err("controller already in use");
-                err = -EBUSY;
-                goto err_put_hcd;
-        }
-
-        hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len);
+        hcd->regs = devm_request_and_ioremap(&dev->dev, res_mem);
         if (!hcd->regs) {
                 err = -ENOMEM;
-                goto err_release_region;
+                goto err_put_hcd;
         }
         err = usb_add_hcd(hcd, irq, IRQF_SHARED);
         if (err)
-                goto err_iounmap;
+                goto err_put_hcd;
 
         platform_set_drvdata(dev, hcd);
 
         return err;
 
-err_iounmap:
-        iounmap(hcd->regs);
-err_release_region:
-        release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
 err_put_hcd:
         usb_put_hcd(hcd);
 err_power:
@@ -155,14 +149,12 @@ err_power:
         return err;
 }
 
-static int __devexit ohci_platform_remove(struct platform_device *dev)
+static int ohci_platform_remove(struct platform_device *dev)
 {
         struct usb_hcd *hcd = platform_get_drvdata(dev);
         struct usb_ohci_pdata *pdata = dev->dev.platform_data;
 
         usb_remove_hcd(hcd);
-        iounmap(hcd->regs);
-        release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
         usb_put_hcd(hcd);
         platform_set_drvdata(dev, NULL);
 
@@ -199,7 +191,7 @@ static int ohci_platform_resume(struct device *dev)
                         return err;
         }
 
-        ohci_finish_controller_resume(hcd);
+        ohci_resume(hcd, false);
         return 0;
 }
 
@@ -222,7 +214,7 @@ static const struct dev_pm_ops ohci_platform_pm_ops = {
 static struct platform_driver ohci_platform_driver = {
         .id_table       = ohci_platform_table,
         .probe          = ohci_platform_probe,
-        .remove         = __devexit_p(ohci_platform_remove),
+        .remove         = ohci_platform_remove,
         .shutdown       = usb_hcd_platform_shutdown,
         .driver         = {
                 .owner  = THIS_MODULE,
diff --git a/drivers/usb/host/ohci-pnx8550.c b/drivers/usb/host/ohci-pnx8550.c
deleted file mode 100644
index 148d27d6a67c..000000000000
--- a/drivers/usb/host/ohci-pnx8550.c
+++ /dev/null
@@ -1,243 +0,0 @@
-/*
- * OHCI HCD (Host Controller Driver) for USB.
- *
- * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
- * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
- * (C) Copyright 2002 Hewlett-Packard Company
- * (C) Copyright 2005 Embedded Alley Solutions, Inc.
- *
- * Bus Glue for PNX8550
- *
- * Written by Christopher Hoover <ch@hpl.hp.com>
- * Based on fragments of previous driver by Russell King et al.
- *
- * Modified for LH7A404 from ohci-sa1111.c
- *  by Durgesh Pattamatta <pattamattad@sharpsec.com>
- *
- * Modified for PNX8550 from ohci-sa1111.c and sa-omap.c
- *  by Vitaly Wool <vitalywool@gmail.com>
- *
- * This file is licenced under the GPL.
- */
-
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <asm/mach-pnx8550/usb.h>
-#include <asm/mach-pnx8550/int.h>
-#include <asm/mach-pnx8550/pci.h>
-
-#ifndef CONFIG_PNX8550
-#error "This file is PNX8550 bus glue.  CONFIG_PNX8550 must be defined."
-#endif
-
-extern int usb_disabled(void);
-
-/*-------------------------------------------------------------------------*/
-
-static void pnx8550_start_hc(struct platform_device *dev)
-{
-        /*
-         * Set register CLK48CTL to enable and 48MHz
-         */
-        outl(0x00000003, PCI_BASE | 0x0004770c);
-
-        /*
-         * Set register CLK12CTL to enable and 48MHz
-         */
-        outl(0x00000003, PCI_BASE | 0x00047710);
-
-        udelay(100);
-}
-
-static void pnx8550_stop_hc(struct platform_device *dev)
-{
-        udelay(10);
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-/* configure so an HC device and id are always provided */
-/* always called with process context; sleeping is OK */
-
-
-/**
- * usb_hcd_pnx8550_probe - initialize pnx8550-based HCDs
- * Context: !in_interrupt()
- *
- * Allocates basic resources for this USB host controller, and
- * then invokes the start() method for the HCD associated with it
- * through the hotplug entry's driver_data.
- *
- */
-int usb_hcd_pnx8550_probe (const struct hc_driver *driver,
-                          struct platform_device *dev)
-{
-        int retval;
-        struct usb_hcd *hcd;
-
-        if (dev->resource[0].flags != IORESOURCE_MEM ||
-                        dev->resource[1].flags != IORESOURCE_IRQ) {
-                dev_err (&dev->dev,"invalid resource type\n");
-                return -ENOMEM;
-        }
-
-        hcd = usb_create_hcd (driver, &dev->dev, "pnx8550");
-        if (!hcd)
-                return -ENOMEM;
-        hcd->rsrc_start = dev->resource[0].start;
-        hcd->rsrc_len = dev->resource[0].end - dev->resource[0].start + 1;
-
-        if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
-                dev_err(&dev->dev, "request_mem_region [0x%08llx, 0x%08llx] "
-                                "failed\n", hcd->rsrc_start, hcd->rsrc_len);
-                retval = -EBUSY;
-                goto err1;
-        }
-
-        hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
-        if (!hcd->regs) {
-                dev_err(&dev->dev, "ioremap [[0x%08llx, 0x%08llx] failed\n",
-                                hcd->rsrc_start, hcd->rsrc_len);
-                retval = -ENOMEM;
-                goto err2;
-        }
-
-        pnx8550_start_hc(dev);
-
-        ohci_hcd_init(hcd_to_ohci(hcd));
-
-        retval = usb_add_hcd(hcd, dev->resource[1].start, 0);
-        if (retval == 0)
-                return retval;
-
-        pnx8550_stop_hc(dev);
-        iounmap(hcd->regs);
- err2:
-        release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
- err1:
-        usb_put_hcd(hcd);
-        return retval;
-}
-
-
-/* may be called without controller electrically present */
-/* may be called with controller, bus, and devices active */
-
-/**
- * usb_hcd_pnx8550_remove - shutdown processing for pnx8550-based HCDs
- * @dev: USB Host Controller being removed
- * Context: !in_interrupt()
- *
- * Reverses the effect of usb_hcd_pnx8550_probe(), first invoking
- * the HCD's stop() method.  It is always called from a thread
- * context, normally "rmmod", "apmd", or something similar.
- *
- */
-void usb_hcd_pnx8550_remove (struct usb_hcd *hcd, struct platform_device *dev)
-{
-        usb_remove_hcd(hcd);
-        pnx8550_stop_hc(dev);
-        iounmap(hcd->regs);
-        release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
-        usb_put_hcd(hcd);
-}
-
-/*-------------------------------------------------------------------------*/
-
-static int __devinit
-ohci_pnx8550_start (struct usb_hcd *hcd)
-{
-        struct ohci_hcd *ohci = hcd_to_ohci (hcd);
-        int             ret;
-
-        ohci_dbg (ohci, "ohci_pnx8550_start, ohci:%p", ohci);
-
-        if ((ret = ohci_init(ohci)) < 0)
-                return ret;
-
-        if ((ret = ohci_run (ohci)) < 0) {
-                dev_err(hcd->self.controller, "can't start %s",
-                        hcd->self.bus_name);
-                ohci_stop (hcd);
-                return ret;
-        }
-
-        return 0;
-}
-
-/*-------------------------------------------------------------------------*/
-
-static const struct hc_driver ohci_pnx8550_hc_driver = {
-        .description =          hcd_name,
-        .product_desc =         "PNX8550 OHCI",
-        .hcd_priv_size =        sizeof(struct ohci_hcd),
-
-        /*
-         * generic hardware linkage
-         */
-        .irq =                  ohci_irq,
-        .flags =                HCD_USB11 | HCD_MEMORY,
-
-        /*
-         * basic lifecycle operations
-         */
-        .start =                ohci_pnx8550_start,
-        .stop =                 ohci_stop,
-
-        /*
-         * managing i/o requests and associated device resources
-         */
-        .urb_enqueue =          ohci_urb_enqueue,
-        .urb_dequeue =          ohci_urb_dequeue,
-        .endpoint_disable =     ohci_endpoint_disable,
-
-        /*
-         * scheduling support
-         */
-        .get_frame_number =     ohci_get_frame,
-
-        /*
-         * root hub support
-         */
-        .hub_status_data =      ohci_hub_status_data,
-        .hub_control =          ohci_hub_control,
-#ifdef  CONFIG_PM
-        .bus_suspend =          ohci_bus_suspend,
-        .bus_resume =           ohci_bus_resume,
-#endif
-        .start_port_reset =     ohci_start_port_reset,
-};
-
-/*-------------------------------------------------------------------------*/
-
-static int ohci_hcd_pnx8550_drv_probe(struct platform_device *pdev)
-{
-        int ret;
-
-        if (usb_disabled())
-                return -ENODEV;
-
-        ret = usb_hcd_pnx8550_probe(&ohci_pnx8550_hc_driver, pdev);
-        return ret;
-}
-
-static int ohci_hcd_pnx8550_drv_remove(struct platform_device *pdev)
-{
-        struct usb_hcd *hcd = platform_get_drvdata(pdev);
-
-        usb_hcd_pnx8550_remove(hcd, pdev);
-        return 0;
-}
-
-MODULE_ALIAS("platform:pnx8550-ohci");
-
-static struct platform_driver ohci_hcd_pnx8550_driver = {
-        .driver = {
-                .name   = "pnx8550-ohci",
-                .owner  = THIS_MODULE,
-        },
-        .probe          = ohci_hcd_pnx8550_drv_probe,
-        .remove         = ohci_hcd_pnx8550_drv_remove,
-};
-
diff --git a/drivers/usb/host/ohci-ppc-of.c b/drivers/usb/host/ohci-ppc-of.c
index e27d5ae2b9eb..64c2ed9ff95e 100644
--- a/drivers/usb/host/ohci-ppc-of.c
+++ b/drivers/usb/host/ohci-ppc-of.c
@@ -19,7 +19,7 @@
 #include <asm/prom.h>
 
 
-static int __devinit
+static int
 ohci_ppc_of_start(struct usb_hcd *hcd)
 {
         struct ohci_hcd *ohci = hcd_to_ohci(hcd);
@@ -81,7 +81,7 @@ static const struct hc_driver ohci_ppc_of_hc_driver = {
 };
 
 
-static int __devinit ohci_hcd_ppc_of_probe(struct platform_device *op)
+static int ohci_hcd_ppc_of_probe(struct platform_device *op)
 {
         struct device_node *dn = op->dev.of_node;
         struct usb_hcd *hcd;
diff --git a/drivers/usb/host/ohci-ppc-soc.c b/drivers/usb/host/ohci-ppc-soc.c
deleted file mode 100644
index 185c39ed81b7..000000000000
--- a/drivers/usb/host/ohci-ppc-soc.c
+++ /dev/null
@@ -1,216 +0,0 @@
-/*
- * OHCI HCD (Host Controller Driver) for USB.
- *
- * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
- * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
- * (C) Copyright 2002 Hewlett-Packard Company
- * (C) Copyright 2003-2005 MontaVista Software Inc.
- *
- * Bus Glue for PPC On-Chip OHCI driver
- * Tested on Freescale MPC5200 and IBM STB04xxx
- *
- * Modified by Dale Farnsworth <dale@farnsworth.org> from ohci-sa1111.c
- *
- * This file is licenced under the GPL.
- */
-
-#include <linux/platform_device.h>
-#include <linux/signal.h>
-
-/* configure so an HC device and id are always provided */
-/* always called with process context; sleeping is OK */
-
-/**
- * usb_hcd_ppc_soc_probe - initialize On-Chip HCDs
- * Context: !in_interrupt()
- *
- * Allocates basic resources for this USB host controller.
- *
- * Store this function in the HCD's struct pci_driver as probe().
- */
-static int usb_hcd_ppc_soc_probe(const struct hc_driver *driver,
-                          struct platform_device *pdev)
-{
-        int retval;
-        struct usb_hcd *hcd;
-        struct ohci_hcd *ohci;
-        struct resource *res;
-        int irq;
-
-        pr_debug("initializing PPC-SOC USB Controller\n");
-
-        res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-        if (!res) {
-                pr_debug("%s: no irq\n", __FILE__);
-                return -ENODEV;
-        }
-        irq = res->start;
-
-        res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-        if (!res) {
-                pr_debug("%s: no reg addr\n", __FILE__);
-                return -ENODEV;
-        }
-
-        hcd = usb_create_hcd(driver, &pdev->dev, "PPC-SOC USB");
-        if (!hcd)
-                return -ENOMEM;
-        hcd->rsrc_start = res->start;
-        hcd->rsrc_len = resource_size(res);
-
-        if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
-                pr_debug("%s: request_mem_region failed\n", __FILE__);
-                retval = -EBUSY;
-                goto err1;
-        }
-
-        hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
-        if (!hcd->regs) {
-                pr_debug("%s: ioremap failed\n", __FILE__);
-                retval = -ENOMEM;
-                goto err2;
-        }
-
-        ohci = hcd_to_ohci(hcd);
-        ohci->flags |= OHCI_QUIRK_BE_MMIO | OHCI_QUIRK_BE_DESC;
-
-#ifdef CONFIG_PPC_MPC52xx
-        /* MPC52xx doesn't need frame_no shift */
-        ohci->flags |= OHCI_QUIRK_FRAME_NO;
-#endif
-        ohci_hcd_init(ohci);
-
-        retval = usb_add_hcd(hcd, irq, 0);
-        if (retval == 0)
-                return retval;
-
-        pr_debug("Removing PPC-SOC USB Controller\n");
-
-        iounmap(hcd->regs);
- err2:
-        release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
- err1:
-        usb_put_hcd(hcd);
-        return retval;
-}
-
-
-/* may be called without controller electrically present */
-/* may be called with controller, bus, and devices active */
-
-/**
- * usb_hcd_ppc_soc_remove - shutdown processing for On-Chip HCDs
- * @pdev: USB Host Controller being removed
- * Context: !in_interrupt()
- *
- * Reverses the effect of usb_hcd_ppc_soc_probe().
- * It is always called from a thread
- * context, normally "rmmod", "apmd", or something similar.
- *
- */
-static void usb_hcd_ppc_soc_remove(struct usb_hcd *hcd,
-                struct platform_device *pdev)
-{
-        usb_remove_hcd(hcd);
-
-        pr_debug("stopping PPC-SOC USB Controller\n");
-
-        iounmap(hcd->regs);
-        release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
-        usb_put_hcd(hcd);
-}
-
-static int __devinit
-ohci_ppc_soc_start(struct usb_hcd *hcd)
-{
-        struct ohci_hcd *ohci = hcd_to_ohci(hcd);
-        int             ret;
-
-        if ((ret = ohci_init(ohci)) < 0)
-                return ret;
-
-        if ((ret = ohci_run(ohci)) < 0) {
-                dev_err(hcd->self.controller, "can't start %s\n",
-                        hcd->self.bus_name);
-                ohci_stop(hcd);
-                return ret;
-        }
-
-        return 0;
-}
-
-static const struct hc_driver ohci_ppc_soc_hc_driver = {
-        .description =          hcd_name,
-        .hcd_priv_size =        sizeof(struct ohci_hcd),
-
-        /*
-         * generic hardware linkage
-         */
-        .irq =                  ohci_irq,
-        .flags =                HCD_USB11 | HCD_MEMORY,
-
-        /*
-         * basic lifecycle operations
-         */
-        .start =                ohci_ppc_soc_start,
-        .stop =                 ohci_stop,
-        .shutdown =             ohci_shutdown,
-
-        /*
-         * managing i/o requests and associated device resources
-         */
-        .urb_enqueue =          ohci_urb_enqueue,
-        .urb_dequeue =          ohci_urb_dequeue,
-        .endpoint_disable =     ohci_endpoint_disable,
-
-        /*
-         * scheduling support
-         */
-        .get_frame_number =     ohci_get_frame,
-
-        /*
-         * root hub support
-         */
-        .hub_status_data =      ohci_hub_status_data,
-        .hub_control =          ohci_hub_control,
-#ifdef  CONFIG_PM
-        .bus_suspend =          ohci_bus_suspend,
-        .bus_resume =           ohci_bus_resume,
-#endif
-        .start_port_reset =     ohci_start_port_reset,
-};
-
-static int ohci_hcd_ppc_soc_drv_probe(struct platform_device *pdev)
-{
-        int ret;
-
-        if (usb_disabled())
-                return -ENODEV;
-
-        ret = usb_hcd_ppc_soc_probe(&ohci_ppc_soc_hc_driver, pdev);
-        return ret;
-}
-
-static int ohci_hcd_ppc_soc_drv_remove(struct platform_device *pdev)
-{
-        struct usb_hcd *hcd = platform_get_drvdata(pdev);
-
-        usb_hcd_ppc_soc_remove(hcd, pdev);
-        return 0;
-}
-
-static struct platform_driver ohci_hcd_ppc_soc_driver = {
-        .probe          = ohci_hcd_ppc_soc_drv_probe,
-        .remove         = ohci_hcd_ppc_soc_drv_remove,
-        .shutdown       = usb_hcd_platform_shutdown,
-#ifdef  CONFIG_PM
-        /*.suspend      = ohci_hcd_ppc_soc_drv_suspend,*/
-        /*.resume       = ohci_hcd_ppc_soc_drv_resume,*/
-#endif
-        .driver         = {
-                .name   = "ppc-soc-ohci",
-                .owner  = THIS_MODULE,
-        },
-};
-
-MODULE_ALIAS("platform:ppc-soc-ohci");
diff --git a/drivers/usb/host/ohci-ps3.c b/drivers/usb/host/ohci-ps3.c
index 2ee1d8d713d2..7d35cd9e2862 100644
--- a/drivers/usb/host/ohci-ps3.c
+++ b/drivers/usb/host/ohci-ps3.c
@@ -30,7 +30,7 @@ static int ps3_ohci_hc_reset(struct usb_hcd *hcd)
         return ohci_init(ohci);
 }
 
-static int __devinit ps3_ohci_hc_start(struct usb_hcd *hcd)
+static int ps3_ohci_hc_start(struct usb_hcd *hcd)
 {
         int result;
         struct ohci_hcd *ohci = hcd_to_ohci(hcd);
@@ -76,7 +76,7 @@ static const struct hc_driver ps3_ohci_hc_driver = {
 #endif
 };
 
-static int __devinit ps3_ohci_probe(struct ps3_system_bus_device *dev)
+static int ps3_ohci_probe(struct ps3_system_bus_device *dev)
 {
         int result;
         struct usb_hcd *hcd;
diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c
index 2bf11440b010..efe71f3ca477 100644
--- a/drivers/usb/host/ohci-pxa27x.c
+++ b/drivers/usb/host/ohci-pxa27x.c
@@ -284,7 +284,7 @@ MODULE_DEVICE_TABLE(of, pxa_ohci_dt_ids);
 
 static u64 pxa_ohci_dma_mask = DMA_BIT_MASK(32);
 
-static int __devinit ohci_pxa_of_init(struct platform_device *pdev)
+static int ohci_pxa_of_init(struct platform_device *pdev)
 {
         struct device_node *np = pdev->dev.of_node;
         struct pxaohci_platform_data *pdata;
@@ -330,7 +330,7 @@ static int __devinit ohci_pxa_of_init(struct platform_device *pdev)
         return 0;
 }
 #else
-static int __devinit ohci_pxa_of_init(struct platform_device *pdev)
+static int ohci_pxa_of_init(struct platform_device *pdev)
 {
         return 0;
 }
@@ -471,7 +471,7 @@ void usb_hcd_pxa27x_remove (struct usb_hcd *hcd, struct platform_device *pdev)
 
 /*-------------------------------------------------------------------------*/
 
-static int __devinit
+static int
 ohci_pxa27x_start (struct usb_hcd *hcd)
 {
         struct ohci_hcd *ohci = hcd_to_ohci (hcd);
@@ -591,7 +591,7 @@ static int ohci_hcd_pxa27x_drv_resume(struct device *dev)
         /* Select Power Management Mode */
         pxa27x_ohci_select_pmm(ohci, inf->port_mode);
 
-        ohci_finish_controller_resume(hcd);
+        ohci_resume(hcd, false);
         return 0;
 }
 
diff --git a/drivers/usb/host/ohci-q.c b/drivers/usb/host/ohci-q.c
index c5a1ea9145fa..7482cfbe8c5e 100644
--- a/drivers/usb/host/ohci-q.c
+++ b/drivers/usb/host/ohci-q.c
@@ -596,7 +596,6 @@ static void td_submit_urb (
                 urb_priv->ed->hwHeadP &= ~cpu_to_hc32 (ohci, ED_C);
         }
 
-        urb_priv->td_cnt = 0;
         list_add (&urb_priv->pending, &ohci->pending);
 
         if (data_len)
@@ -672,7 +671,8 @@ static void td_submit_urb (
          * we could often reduce the number of TDs here.
          */
         case PIPE_ISOCHRONOUS:
-                for (cnt = 0; cnt < urb->number_of_packets; cnt++) {
+                for (cnt = urb_priv->td_cnt; cnt < urb->number_of_packets;
+                                cnt++) {
                         int     frame = urb->start_frame;
 
                         // FIXME scheduling should handle frame counter
@@ -1128,6 +1128,25 @@ dl_done_list (struct ohci_hcd *ohci)
 
         while (td) {
                 struct td       *td_next = td->next_dl_td;
+                struct ed       *ed = td->ed;
+
+                /*
+                 * Some OHCI controllers (NVIDIA for sure, maybe others)
+                 * occasionally forget to add TDs to the done queue.  Since
+                 * TDs for a given endpoint are always processed in order,
+                 * if we find a TD on the donelist then all of its
+                 * predecessors must be finished as well.
+                 */
+                for (;;) {
+                        struct td       *td2;
+
+                        td2 = list_first_entry(&ed->td_list, struct td,
+                                        td_list);
+                        if (td2 == td)
+                                break;
+                        takeback_td(ohci, td2);
+                }
+
                 takeback_td(ohci, td);
                 td = td_next;
         }
diff --git a/drivers/usb/host/ohci-s3c2410.c b/drivers/usb/host/ohci-s3c2410.c
index 0d2309ca471e..ad0f55269603 100644
--- a/drivers/usb/host/ohci-s3c2410.c
+++ b/drivers/usb/host/ohci-s3c2410.c
@@ -323,8 +323,6 @@ usb_hcd_s3c2410_remove(struct usb_hcd *hcd, struct platform_device *dev)
 {
         usb_remove_hcd(hcd);
         s3c2410_stop_hc(dev);
-        iounmap(hcd->regs);
-        release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
         usb_put_hcd(hcd);
 }
 
@@ -353,35 +351,29 @@ static int usb_hcd_s3c2410_probe(const struct hc_driver *driver,
         hcd->rsrc_start = dev->resource[0].start;
         hcd->rsrc_len   = resource_size(&dev->resource[0]);
 
-        if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
-                dev_err(&dev->dev, "request_mem_region failed\n");
-                retval = -EBUSY;
+        hcd->regs = devm_request_and_ioremap(&dev->dev, &dev->resource[0]);
+        if (!hcd->regs) {
+                dev_err(&dev->dev, "devm_request_and_ioremap failed\n");
+                retval = -ENOMEM;
                 goto err_put;
         }
 
-        clk = clk_get(&dev->dev, "usb-host");
+        clk = devm_clk_get(&dev->dev, "usb-host");
         if (IS_ERR(clk)) {
                 dev_err(&dev->dev, "cannot get usb-host clock\n");
                 retval = PTR_ERR(clk);
-                goto err_mem;
+                goto err_put;
         }
 
-        usb_clk = clk_get(&dev->dev, "usb-bus-host");
+        usb_clk = devm_clk_get(&dev->dev, "usb-bus-host");
         if (IS_ERR(usb_clk)) {
                 dev_err(&dev->dev, "cannot get usb-bus-host clock\n");
                 retval = PTR_ERR(usb_clk);
-                goto err_clk;
+                goto err_put;
         }
 
         s3c2410_start_hc(dev, hcd);
 
-        hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
-        if (!hcd->regs) {
-                dev_err(&dev->dev, "ioremap failed\n");
-                retval = -ENOMEM;
-                goto err_ioremap;
-        }
-
         ohci_hcd_init(hcd_to_ohci(hcd));
 
         retval = usb_add_hcd(hcd, dev->resource[1].start, 0);
@@ -392,14 +384,6 @@ static int usb_hcd_s3c2410_probe(const struct hc_driver *driver,
 
  err_ioremap:
         s3c2410_stop_hc(dev);
-        iounmap(hcd->regs);
-        clk_put(usb_clk);
-
- err_clk:
-        clk_put(clk);
-
- err_mem:
-        release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
 
  err_put:
         usb_put_hcd(hcd);
@@ -474,12 +458,12 @@ static const struct hc_driver ohci_s3c2410_hc_driver = {
 
 /* device driver */
 
-static int __devinit ohci_hcd_s3c2410_drv_probe(struct platform_device *pdev)
+static int ohci_hcd_s3c2410_drv_probe(struct platform_device *pdev)
 {
         return usb_hcd_s3c2410_probe(&ohci_s3c2410_hc_driver, pdev);
 }
 
-static int __devexit ohci_hcd_s3c2410_drv_remove(struct platform_device *pdev)
+static int ohci_hcd_s3c2410_drv_remove(struct platform_device *pdev)
 {
         struct usb_hcd *hcd = platform_get_drvdata(pdev);
 
@@ -524,8 +508,7 @@ static int ohci_hcd_s3c2410_drv_resume(struct device *dev)
 
         s3c2410_start_hc(pdev, hcd);
 
-        set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
-        ohci_finish_controller_resume(hcd);
+        ohci_resume(hcd, false);
 
         return 0;
 }
@@ -541,7 +524,7 @@ static const struct dev_pm_ops ohci_hcd_s3c2410_pm_ops = {
 
 static struct platform_driver ohci_hcd_s3c2410_driver = {
         .probe          = ohci_hcd_s3c2410_drv_probe,
-        .remove         = __devexit_p(ohci_hcd_s3c2410_drv_remove),
+        .remove         = ohci_hcd_s3c2410_drv_remove,
         .shutdown       = usb_hcd_platform_shutdown,
         .driver         = {
                 .owner  = THIS_MODULE,
diff --git a/drivers/usb/host/ohci-sa1111.c b/drivers/usb/host/ohci-sa1111.c
index b6cc92520924..17b2a7dad77b 100644
--- a/drivers/usb/host/ohci-sa1111.c
+++ b/drivers/usb/host/ohci-sa1111.c
@@ -63,7 +63,7 @@ static int ohci_sa1111_reset(struct usb_hcd *hcd)
         return ohci_init(ohci);
 }
 
-static int __devinit ohci_sa1111_start(struct usb_hcd *hcd)
+static int ohci_sa1111_start(struct usb_hcd *hcd)
 {
         struct ohci_hcd *ohci = hcd_to_ohci(hcd);
         int ret;
diff --git a/drivers/usb/host/ohci-sh.c b/drivers/usb/host/ohci-sh.c
deleted file mode 100644
index 76a20c278362..000000000000
--- a/drivers/usb/host/ohci-sh.c
+++ /dev/null
@@ -1,141 +0,0 @@
-/*
- * OHCI HCD (Host Controller Driver) for USB.
- *
- * Copyright (C) 2008 Renesas Solutions Corp.
- *
- * Author : Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- *
- */
-
-#include <linux/platform_device.h>
-
-static int ohci_sh_start(struct usb_hcd *hcd)
-{
-        struct ohci_hcd *ohci = hcd_to_ohci(hcd);
-
-        ohci_hcd_init(ohci);
-        ohci_init(ohci);
-        ohci_run(ohci);
-        return 0;
-}
-
-static const struct hc_driver ohci_sh_hc_driver = {
-        .description =          hcd_name,
-        .product_desc =         "SuperH OHCI",
-        .hcd_priv_size =        sizeof(struct ohci_hcd),
-
-        /*
-         * generic hardware linkage
-         */
-        .irq =                  ohci_irq,
-        .flags =                HCD_USB11 | HCD_MEMORY,
-
-        /*
-         * basic lifecycle operations
-         */
-        .start =                ohci_sh_start,
-        .stop =                 ohci_stop,
-        .shutdown =             ohci_shutdown,
-
-        /*
-         * managing i/o requests and associated device resources
-         */
-        .urb_enqueue =          ohci_urb_enqueue,
-        .urb_dequeue =          ohci_urb_dequeue,
-        .endpoint_disable =     ohci_endpoint_disable,
-
-        /*
-         * scheduling support
-         */
-        .get_frame_number =     ohci_get_frame,
-
-        /*
-         * root hub support
-         */
-        .hub_status_data =      ohci_hub_status_data,
-        .hub_control =          ohci_hub_control,
-#ifdef  CONFIG_PM
-        .bus_suspend =          ohci_bus_suspend,
-        .bus_resume =           ohci_bus_resume,
-#endif
-        .start_port_reset =     ohci_start_port_reset,
-};
-
-/*-------------------------------------------------------------------------*/
-
-static int ohci_hcd_sh_probe(struct platform_device *pdev)
-{
-        struct resource *res = NULL;
-        struct usb_hcd *hcd = NULL;
-        int irq = -1;
-        int ret;
-
-        if (usb_disabled())
-                return -ENODEV;
-
-        res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-        if (!res) {
-                dev_err(&pdev->dev, "platform_get_resource error.\n");
-                return -ENODEV;
-        }
-
-        irq = platform_get_irq(pdev, 0);
-        if (irq < 0) {
-                dev_err(&pdev->dev, "platform_get_irq error.\n");
-                return -ENODEV;
-        }
-
-        /* initialize hcd */
-        hcd = usb_create_hcd(&ohci_sh_hc_driver, &pdev->dev, (char *)hcd_name);
-        if (!hcd) {
-                dev_err(&pdev->dev, "Failed to create hcd\n");
-                return -ENOMEM;
-        }
-
-        hcd->regs = (void __iomem *)res->start;
-        hcd->rsrc_start = res->start;
-        hcd->rsrc_len = resource_size(res);
-        ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
-        if (ret != 0) {
-                dev_err(&pdev->dev, "Failed to add hcd\n");
-                usb_put_hcd(hcd);
-                return ret;
-        }
-
-        return ret;
-}
-
-static int ohci_hcd_sh_remove(struct platform_device *pdev)
-{
-        struct usb_hcd *hcd = platform_get_drvdata(pdev);
-
-        usb_remove_hcd(hcd);
-        usb_put_hcd(hcd);
-
-        return 0;
-}
-
-static struct platform_driver ohci_hcd_sh_driver = {
-        .probe          = ohci_hcd_sh_probe,
-        .remove         = ohci_hcd_sh_remove,
-        .shutdown       = usb_hcd_platform_shutdown,
-        .driver         = {
-                .name   = "sh_ohci",
-                .owner  = THIS_MODULE,
-        },
-};
-
-MODULE_ALIAS("platform:sh_ohci");
diff --git a/drivers/usb/host/ohci-sm501.c b/drivers/usb/host/ohci-sm501.c
index 5596ac2ba1ca..3b5b908fd47b 100644
--- a/drivers/usb/host/ohci-sm501.c
+++ b/drivers/usb/host/ohci-sm501.c
@@ -238,7 +238,7 @@ static int ohci_sm501_resume(struct platform_device *pdev)
         ohci->next_statechange = jiffies;
 
         sm501_unit_power(dev->parent, SM501_GATE_USB_HOST, 1);
-        ohci_finish_controller_resume(hcd);
+        ohci_resume(hcd, false);
         return 0;
 }
 #else
diff --git a/drivers/usb/host/ohci-spear.c b/drivers/usb/host/ohci-spear.c
index fc7305ee3c9c..9020bf0e2eca 100644
--- a/drivers/usb/host/ohci-spear.c
+++ b/drivers/usb/host/ohci-spear.c
@@ -33,7 +33,7 @@ static void spear_stop_ohci(struct spear_ohci *ohci)
         clk_disable_unprepare(ohci->clk);
 }
 
-static int __devinit ohci_spear_start(struct usb_hcd *hcd)
+static int ohci_spear_start(struct usb_hcd *hcd)
 {
         struct ohci_hcd *ohci = hcd_to_ohci(hcd);
         int ret;
@@ -101,13 +101,11 @@ static int spear_ohci_hcd_drv_probe(struct platform_device *pdev)
         struct spear_ohci *ohci_p;
         struct resource *res;
         int retval, irq;
-        char clk_name[20] = "usbh_clk";
-        static int instance = -1;
 
         irq = platform_get_irq(pdev, 0);
         if (irq < 0) {
                 retval = irq;
-                goto fail_irq_get;
+                goto fail;
         }
 
         /*
@@ -118,47 +116,39 @@ static int spear_ohci_hcd_drv_probe(struct platform_device *pdev)
         if (!pdev->dev.dma_mask)
                 pdev->dev.dma_mask = &spear_ohci_dma_mask;
 
-        /*
-         * Increment the device instance, when probing via device-tree
-         */
-        if (pdev->id < 0)
-                instance++;
-        else
-                instance = pdev->id;
-        sprintf(clk_name, "usbh.%01d_clk", instance);
-
-        usbh_clk = clk_get(NULL, clk_name);
+        usbh_clk = devm_clk_get(&pdev->dev, NULL);
         if (IS_ERR(usbh_clk)) {
                 dev_err(&pdev->dev, "Error getting interface clock\n");
                 retval = PTR_ERR(usbh_clk);
-                goto fail_get_usbh_clk;
+                goto fail;
         }
 
         hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
         if (!hcd) {
                 retval = -ENOMEM;
-                goto fail_create_hcd;
+                goto fail;
         }
 
         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
         if (!res) {
                 retval = -ENODEV;
-                goto fail_request_resource;
+                goto err_put_hcd;
         }
 
         hcd->rsrc_start = pdev->resource[0].start;
         hcd->rsrc_len = resource_size(res);
-        if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
+        if (!devm_request_mem_region(&pdev->dev, hcd->rsrc_start, hcd->rsrc_len,
+                                hcd_name)) {
                 dev_dbg(&pdev->dev, "request_mem_region failed\n");
                 retval = -EBUSY;
-                goto fail_request_resource;
+                goto err_put_hcd;
         }
 
-        hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
+        hcd->regs = devm_ioremap(&pdev->dev, hcd->rsrc_start, hcd->rsrc_len);
         if (!hcd->regs) {
                 dev_dbg(&pdev->dev, "ioremap failed\n");
                 retval = -ENOMEM;
-                goto fail_ioremap;
+                goto err_put_hcd;
         }
 
         ohci_p = (struct spear_ohci *)hcd_to_ohci(hcd);
@@ -171,15 +161,9 @@ static int spear_ohci_hcd_drv_probe(struct platform_device *pdev)
                 return retval;
 
         spear_stop_ohci(ohci_p);
-        iounmap(hcd->regs);
-fail_ioremap:
-        release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
-fail_request_resource:
+err_put_hcd:
         usb_put_hcd(hcd);
-fail_create_hcd:
-        clk_put(usbh_clk);
-fail_get_usbh_clk:
-fail_irq_get:
+fail:
         dev_err(&pdev->dev, "init fail, %d\n", retval);
 
         return retval;
@@ -194,12 +178,8 @@ static int spear_ohci_hcd_drv_remove(struct platform_device *pdev)
         if (ohci_p->clk)
                 spear_stop_ohci(ohci_p);
 
-        iounmap(hcd->regs);
-        release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
         usb_put_hcd(hcd);
 
-        if (ohci_p->clk)
-                clk_put(ohci_p->clk);
         platform_set_drvdata(pdev, NULL);
         return 0;
 }
@@ -231,12 +211,12 @@ static int spear_ohci_hcd_drv_resume(struct platform_device *dev)
         ohci->next_statechange = jiffies;
 
         spear_start_ohci(ohci_p);
-        ohci_finish_controller_resume(hcd);
+        ohci_resume(hcd, false);
         return 0;
 }
 #endif
 
-static struct of_device_id spear_ohci_id_table[] __devinitdata = {
+static struct of_device_id spear_ohci_id_table[] = {
         { .compatible = "st,spear600-ohci", },
         { },
 };
diff --git a/drivers/usb/host/ohci-tmio.c b/drivers/usb/host/ohci-tmio.c
index 60c2b0722f2e..5e3a6deb62b1 100644
--- a/drivers/usb/host/ohci-tmio.c
+++ b/drivers/usb/host/ohci-tmio.c
@@ -128,7 +128,8 @@ static void tmio_start_hc(struct platform_device *dev)
         tmio_iowrite8(2, tmio->ccr + CCR_INTC);
 
         dev_info(&dev->dev, "revision %d @ 0x%08llx, irq %d\n",
-                        tmio_ioread8(tmio->ccr + CCR_REVID), hcd->rsrc_start, hcd->irq);
+                        tmio_ioread8(tmio->ccr + CCR_REVID),
+                        (u64) hcd->rsrc_start, hcd->irq);
 }
 
 static int ohci_tmio_start(struct usb_hcd *hcd)
@@ -184,7 +185,7 @@ static const struct hc_driver ohci_tmio_hc_driver = {
 /*-------------------------------------------------------------------------*/
 static struct platform_driver ohci_hcd_tmio_driver;
 
-static int __devinit ohci_hcd_tmio_drv_probe(struct platform_device *dev)
+static int ohci_hcd_tmio_drv_probe(struct platform_device *dev)
 {
         const struct mfd_cell *cell = mfd_get_cell(dev);
         struct resource *regs = platform_get_resource(dev, IORESOURCE_MEM, 0);
@@ -271,7 +272,7 @@ err_usb_create_hcd:
         return ret;
 }
 
-static int __devexit ohci_hcd_tmio_drv_remove(struct platform_device *dev)
+static int ohci_hcd_tmio_drv_remove(struct platform_device *dev)
 {
         struct usb_hcd *hcd = platform_get_drvdata(dev);
         struct tmio_hcd *tmio = hcd_to_tmio(hcd);
@@ -352,7 +353,7 @@ static int ohci_hcd_tmio_drv_resume(struct platform_device *dev)
 
         spin_unlock_irqrestore(&tmio->lock, flags);
 
-        ohci_finish_controller_resume(hcd);
+        ohci_resume(hcd, false);
 
         return 0;
 }
@@ -363,7 +364,7 @@ static int ohci_hcd_tmio_drv_resume(struct platform_device *dev)
 
 static struct platform_driver ohci_hcd_tmio_driver = {
         .probe          = ohci_hcd_tmio_drv_probe,
-        .remove         = __devexit_p(ohci_hcd_tmio_drv_remove),
+        .remove         = ohci_hcd_tmio_drv_remove,
         .shutdown       = usb_hcd_platform_shutdown,
         .suspend        = ohci_hcd_tmio_drv_suspend,
         .resume         = ohci_hcd_tmio_drv_resume,
diff --git a/drivers/usb/host/ohci-xls.c b/drivers/usb/host/ohci-xls.c
deleted file mode 100644
index 41e378f17c66..000000000000
--- a/drivers/usb/host/ohci-xls.c
+++ /dev/null
@@ -1,152 +0,0 @@
-/*
- * OHCI HCD for Netlogic XLS processors.
- *
- * (C) Copyright 2011 Netlogic Microsystems Inc.
- *
- *  Based on ohci-au1xxx.c, and other Linux OHCI drivers.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive for
- * more details.
- */
-
-#include <linux/platform_device.h>
-#include <linux/signal.h>
-
-static int ohci_xls_probe_internal(const struct hc_driver *driver,
-                        struct platform_device *dev)
-{
-        struct resource *res;
-        struct usb_hcd *hcd;
-        int retval, irq;
-
-        /* Get our IRQ from an earlier registered Platform Resource */
-        irq = platform_get_irq(dev, 0);
-        if (irq < 0) {
-                dev_err(&dev->dev, "Found HC with no IRQ\n");
-                return -ENODEV;
-        }
-
-        /* Get our Memory Handle */
-        res = platform_get_resource(dev, IORESOURCE_MEM, 0);
-        if (!res) {
-                dev_err(&dev->dev, "MMIO Handle incorrect!\n");
-                return -ENODEV;
-        }
-
-        hcd = usb_create_hcd(driver, &dev->dev, "XLS");
-        if (!hcd) {
-                retval = -ENOMEM;
-                goto err1;
-        }
-        hcd->rsrc_start = res->start;
-        hcd->rsrc_len = resource_size(res);
-
-        if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len,
-                        driver->description)) {
-                dev_dbg(&dev->dev, "Controller already in use\n");
-                retval = -EBUSY;
-                goto err2;
-        }
-
-        hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len);
-        if (hcd->regs == NULL) {
-                dev_dbg(&dev->dev, "error mapping memory\n");
-                retval = -EFAULT;
-                goto err3;
-        }
-
-        retval = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED);
-        if (retval != 0)
-                goto err4;
-        return retval;
-
-err4:
-        iounmap(hcd->regs);
-err3:
-        release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
-err2:
-        usb_put_hcd(hcd);
-err1:
-        dev_err(&dev->dev, "init fail, %d\n", retval);
-        return retval;
-}
-
-static int ohci_xls_reset(struct usb_hcd *hcd)
-{
-        struct ohci_hcd *ohci = hcd_to_ohci(hcd);
-
-        ohci_hcd_init(ohci);
-        return ohci_init(ohci);
-}
-
-static int __devinit ohci_xls_start(struct usb_hcd *hcd)
-{
-        struct ohci_hcd *ohci;
-        int ret;
-
-        ohci = hcd_to_ohci(hcd);
-        ret = ohci_run(ohci);
-        if (ret < 0) {
-                dev_err(hcd->self.controller, "can't start %s\n",
-                        hcd->self.bus_name);
-                ohci_stop(hcd);
-                return ret;
-        }
-        return 0;
-}
-
-static struct hc_driver ohci_xls_hc_driver = {
-        .description    = hcd_name,
-        .product_desc   = "XLS OHCI Host Controller",
-        .hcd_priv_size  = sizeof(struct ohci_hcd),
-        .irq            = ohci_irq,
-        .flags          = HCD_MEMORY | HCD_USB11,
-        .reset          = ohci_xls_reset,
-        .start          = ohci_xls_start,
-        .stop           = ohci_stop,
-        .shutdown       = ohci_shutdown,
-        .urb_enqueue    = ohci_urb_enqueue,
-        .urb_dequeue    = ohci_urb_dequeue,
-        .endpoint_disable = ohci_endpoint_disable,
-        .get_frame_number = ohci_get_frame,
-        .hub_status_data = ohci_hub_status_data,
-        .hub_control    = ohci_hub_control,
-#ifdef CONFIG_PM
-        .bus_suspend    = ohci_bus_suspend,
-        .bus_resume     = ohci_bus_resume,
-#endif
-        .start_port_reset = ohci_start_port_reset,
-};
-
-static int ohci_xls_probe(struct platform_device *dev)
-{
-        int ret;
-
-        pr_debug("In ohci_xls_probe");
-        if (usb_disabled())
-                return -ENODEV;
-        ret = ohci_xls_probe_internal(&ohci_xls_hc_driver, dev);
-        return ret;
-}
-
-static int ohci_xls_remove(struct platform_device *dev)
-{
-        struct usb_hcd *hcd = platform_get_drvdata(dev);
-
-        usb_remove_hcd(hcd);
-        iounmap(hcd->regs);
-        release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
-        usb_put_hcd(hcd);
-        return 0;
-}
-
-static struct platform_driver ohci_xls_driver = {
-        .probe          = ohci_xls_probe,
-        .remove         = ohci_xls_remove,
-        .shutdown       = usb_hcd_platform_shutdown,
-        .driver         = {
-                .name   = "ohci-xls-0",
-                .owner  = THIS_MODULE,
-        },
-};
diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index 39f9e4a9a2d3..a3b6d7104ae2 100644
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -443,7 +443,7 @@ static inline int io_type_enabled(struct pci_dev *pdev, unsigned int mask)
 #define pio_enabled(dev) io_type_enabled(dev, PCI_COMMAND_IO)
 #define mmio_enabled(dev) io_type_enabled(dev, PCI_COMMAND_MEMORY)
 
-static void __devinit quirk_usb_handoff_uhci(struct pci_dev *pdev)
+static void quirk_usb_handoff_uhci(struct pci_dev *pdev)
 {
         unsigned long base = 0;
         int i;
@@ -461,12 +461,12 @@ static void __devinit quirk_usb_handoff_uhci(struct pci_dev *pdev)
                 uhci_check_and_reset_hc(pdev, base);
 }
 
-static int __devinit mmio_resource_enabled(struct pci_dev *pdev, int idx)
+static int mmio_resource_enabled(struct pci_dev *pdev, int idx)
 {
         return pci_resource_start(pdev, idx) && mmio_enabled(pdev);
 }
 
-static void __devinit quirk_usb_handoff_ohci(struct pci_dev *pdev)
+static void quirk_usb_handoff_ohci(struct pci_dev *pdev)
 {
         void __iomem *base;
         u32 control;
@@ -533,7 +533,7 @@ static void __devinit quirk_usb_handoff_ohci(struct pci_dev *pdev)
         iounmap(base);
 }
 
-static const struct dmi_system_id __devinitconst ehci_dmi_nohandoff_table[] = {
+static const struct dmi_system_id ehci_dmi_nohandoff_table[] = {
         {
                 /*  Pegatron Lucid (ExoPC) */
                 .matches = {
@@ -558,7 +558,7 @@ static const struct dmi_system_id __devinitconst ehci_dmi_nohandoff_table[] = {
         { }
 };
 
-static void __devinit ehci_bios_handoff(struct pci_dev *pdev,
+static void ehci_bios_handoff(struct pci_dev *pdev,
                                         void __iomem *op_reg_base,
                                         u32 cap, u8 offset)
 {
@@ -626,7 +626,7 @@ static void __devinit ehci_bios_handoff(struct pci_dev *pdev,
                 writel(0, op_reg_base + EHCI_CONFIGFLAG);
 }
 
-static void __devinit quirk_usb_disable_ehci(struct pci_dev *pdev)
+static void quirk_usb_disable_ehci(struct pci_dev *pdev)
 {
         void __iomem *base, *op_reg_base;
         u32     hcc_params, cap, val;
@@ -723,6 +723,7 @@ static int handshake(void __iomem *ptr, u32 mask, u32 done,
 }
 
 #define PCI_DEVICE_ID_INTEL_LYNX_POINT_XHCI     0x8C31
+#define PCI_DEVICE_ID_INTEL_LYNX_POINT_LP_XHCI  0x9C31
 
 bool usb_is_intel_ppt_switchable_xhci(struct pci_dev *pdev)
 {
@@ -736,7 +737,8 @@ bool usb_is_intel_lpt_switchable_xhci(struct pci_dev *pdev)
 {
         return pdev->class == PCI_CLASS_SERIAL_USB_XHCI &&
                 pdev->vendor == PCI_VENDOR_ID_INTEL &&
-                pdev->device == PCI_DEVICE_ID_INTEL_LYNX_POINT_XHCI;
+                (pdev->device == PCI_DEVICE_ID_INTEL_LYNX_POINT_XHCI ||
+                 pdev->device == PCI_DEVICE_ID_INTEL_LYNX_POINT_LP_XHCI);
 }
 
 bool usb_is_intel_switchable_xhci(struct pci_dev *pdev)
@@ -841,7 +843,7 @@ EXPORT_SYMBOL_GPL(usb_disable_xhci_ports);
  * and then waits 5 seconds for the BIOS to hand over control.
  * If we timeout, assume the BIOS is broken and take control anyway.
  */
-static void __devinit quirk_usb_handoff_xhci(struct pci_dev *pdev)
+static void quirk_usb_handoff_xhci(struct pci_dev *pdev)
 {
         void __iomem *base;
         int ext_cap_offset;
@@ -941,7 +943,7 @@ hc_init:
         iounmap(base);
 }
 
-static void __devinit quirk_usb_early_handoff(struct pci_dev *pdev)
+static void quirk_usb_early_handoff(struct pci_dev *pdev)
 {
         /* Skip Netlogic mips SoC's internal PCI USB controller.
          * This device does not need/support EHCI/OHCI handoff
diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c
index fcc09e5ec0ad..a6fd8f5371df 100644
--- a/drivers/usb/host/r8a66597-hcd.c
+++ b/drivers/usb/host/r8a66597-hcd.c
@@ -2036,10 +2036,8 @@ static void collect_usb_address_map(struct usb_device *udev, unsigned long *map)
             udev->parent->descriptor.bDeviceClass == USB_CLASS_HUB)
                 map[udev->devnum/32] |= (1 << (udev->devnum % 32));
 
-        usb_hub_for_each_child(udev, chix, childdev) {
-                if (childdev)
-                        collect_usb_address_map(childdev, map);
-        }
+        usb_hub_for_each_child(udev, chix, childdev)
+                collect_usb_address_map(childdev, map);
 }
 
 /* this function must be called with interrupt disabled */
@@ -2393,7 +2391,7 @@ static const struct dev_pm_ops r8a66597_dev_pm_ops = {
 #define R8A66597_DEV_PM_OPS     NULL
 #endif
 
-static int __devexit r8a66597_remove(struct platform_device *pdev)
+static int r8a66597_remove(struct platform_device *pdev)
 {
         struct r8a66597         *r8a66597 = dev_get_drvdata(&pdev->dev);
         struct usb_hcd          *hcd = r8a66597_to_hcd(r8a66597);
@@ -2407,7 +2405,7 @@ static int __devexit r8a66597_remove(struct platform_device *pdev)
         return 0;
 }
 
-static int __devinit r8a66597_probe(struct platform_device *pdev)
+static int r8a66597_probe(struct platform_device *pdev)
 {
         char clk_name[8];
         struct resource *res = NULL, *ires;
@@ -2534,7 +2532,7 @@ clean_up:
 
 static struct platform_driver r8a66597_driver = {
         .probe =        r8a66597_probe,
-        .remove =       __devexit_p(r8a66597_remove),
+        .remove =       r8a66597_remove,
         .driver         = {
                 .name = (char *) hcd_name,
                 .owner  = THIS_MODULE,
diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c
index 619b05f42d4f..d62f0404baaa 100644
--- a/drivers/usb/host/sl811-hcd.c
+++ b/drivers/usb/host/sl811-hcd.c
@@ -1595,7 +1595,7 @@ static struct hc_driver sl811h_hc_driver = {
 
 /*-------------------------------------------------------------------------*/
 
-static int __devexit
+static int
 sl811h_remove(struct platform_device *dev)
 {
         struct usb_hcd          *hcd = platform_get_drvdata(dev);
@@ -1618,7 +1618,7 @@ sl811h_remove(struct platform_device *dev)
         return 0;
 }
 
-static int __devinit
+static int
 sl811h_probe(struct platform_device *dev)
 {
         struct usb_hcd          *hcd;
@@ -1808,7 +1808,7 @@ sl811h_resume(struct platform_device *dev)
 /* this driver is exported so sl811_cs can depend on it */
 struct platform_driver sl811h_driver = {
         .probe =        sl811h_probe,
-        .remove =       __devexit_p(sl811h_remove),
+        .remove =       sl811h_remove,
 
         .suspend =      sl811h_suspend,
         .resume =       sl811h_resume,
diff --git a/drivers/usb/host/ssb-hcd.c b/drivers/usb/host/ssb-hcd.c
index c2a29faba076..74af2c6287d2 100644
--- a/drivers/usb/host/ssb-hcd.c
+++ b/drivers/usb/host/ssb-hcd.c
@@ -39,7 +39,7 @@ struct ssb_hcd_device {
         u32 enable_flags;
 };
 
-static void __devinit ssb_hcd_5354wa(struct ssb_device *dev)
+static void ssb_hcd_5354wa(struct ssb_device *dev)
 {
 #ifdef CONFIG_SSB_DRIVER_MIPS
         /* Work around for 5354 failures */
@@ -53,7 +53,7 @@ static void __devinit ssb_hcd_5354wa(struct ssb_device *dev)
 #endif
 }
 
-static void __devinit ssb_hcd_usb20wa(struct ssb_device *dev)
+static void ssb_hcd_usb20wa(struct ssb_device *dev)
 {
         if (dev->id.coreid == SSB_DEV_USB20_HOST) {
                 /*
@@ -80,7 +80,7 @@ static void __devinit ssb_hcd_usb20wa(struct ssb_device *dev)
 }
 
 /* based on arch/mips/brcm-boards/bcm947xx/pcibios.c */
-static u32 __devinit ssb_hcd_init_chip(struct ssb_device *dev)
+static u32 ssb_hcd_init_chip(struct ssb_device *dev)
 {
         u32 flags = 0;
 
@@ -101,8 +101,7 @@ static const struct usb_ehci_pdata ehci_pdata = {
 static const struct usb_ohci_pdata ohci_pdata = {
 };
 
-static struct platform_device * __devinit
-ssb_hcd_create_pdev(struct ssb_device *dev, bool ohci, u32 addr, u32 len)
+static struct platform_device *ssb_hcd_create_pdev(struct ssb_device *dev, bool ohci, u32 addr, u32 len)
 {
         struct platform_device *hci_dev;
         struct resource hci_res[2];
@@ -148,7 +147,7 @@ err_alloc:
         return ERR_PTR(ret);
 }
 
-static int __devinit ssb_hcd_probe(struct ssb_device *dev,
+static int ssb_hcd_probe(struct ssb_device *dev,
                                    const struct ssb_device_id *id)
 {
         int err, tmp;
@@ -207,7 +206,7 @@ err_free_usb_dev:
         return err;
 }
 
-static void __devexit ssb_hcd_remove(struct ssb_device *dev)
+static void ssb_hcd_remove(struct ssb_device *dev)
 {
         struct ssb_hcd_device *usb_dev = ssb_get_drvdata(dev);
         struct platform_device *ohci_dev = usb_dev->ohci_dev;
@@ -221,7 +220,7 @@ static void __devexit ssb_hcd_remove(struct ssb_device *dev)
         ssb_device_disable(dev, 0);
 }
 
-static void __devexit ssb_hcd_shutdown(struct ssb_device *dev)
+static void ssb_hcd_shutdown(struct ssb_device *dev)
 {
         ssb_device_disable(dev, 0);
 }
@@ -249,7 +248,7 @@ static int ssb_hcd_resume(struct ssb_device *dev)
 #define ssb_hcd_resume  NULL
 #endif /* CONFIG_PM */
 
-static const struct ssb_device_id ssb_hcd_table[] __devinitconst = {
+static const struct ssb_device_id ssb_hcd_table[] = {
         SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOSTDEV, SSB_ANY_REV),
         SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOST, SSB_ANY_REV),
         SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB20_HOST, SSB_ANY_REV),
@@ -261,7 +260,7 @@ static struct ssb_driver ssb_hcd_driver = {
         .name           = KBUILD_MODNAME,
         .id_table       = ssb_hcd_table,
         .probe          = ssb_hcd_probe,
-        .remove         = __devexit_p(ssb_hcd_remove),
+        .remove         = ssb_hcd_remove,
         .shutdown       = ssb_hcd_shutdown,
         .suspend        = ssb_hcd_suspend,
         .resume         = ssb_hcd_resume,
diff --git a/drivers/usb/host/u132-hcd.c b/drivers/usb/host/u132-hcd.c
index dbbd1ba25224..5efdffe32365 100644
--- a/drivers/usb/host/u132-hcd.c
+++ b/drivers/usb/host/u132-hcd.c
@@ -2990,7 +2990,7 @@ static struct hc_driver u132_hc_driver = {
 * synchronously - but instead should immediately stop activity to the
 * device and asynchronously call usb_remove_hcd()
 */
-static int __devexit u132_remove(struct platform_device *pdev)
+static int u132_remove(struct platform_device *pdev)
 {
         struct usb_hcd *hcd = platform_get_drvdata(pdev);
         if (hcd) {
@@ -3084,7 +3084,7 @@ static void u132_initialise(struct u132 *u132, struct platform_device *pdev)
         mutex_unlock(&u132->sw_lock);
 }
 
-static int __devinit u132_probe(struct platform_device *pdev)
+static int u132_probe(struct platform_device *pdev)
 {
         struct usb_hcd *hcd;
         int retval;
@@ -3212,7 +3212,7 @@ static int u132_resume(struct platform_device *pdev)
 */
 static struct platform_driver u132_platform_driver = {
         .probe = u132_probe,
-        .remove = __devexit_p(u132_remove),
+        .remove = u132_remove,
         .suspend = u132_suspend,
         .resume = u132_resume,
         .driver = {
diff --git a/drivers/usb/host/uhci-grlib.c b/drivers/usb/host/uhci-grlib.c
index f7a62138e3e0..511bfc46dd78 100644
--- a/drivers/usb/host/uhci-grlib.c
+++ b/drivers/usb/host/uhci-grlib.c
@@ -85,7 +85,7 @@ static const struct hc_driver uhci_grlib_hc_driver = {
 };
 
 
-static int __devinit uhci_hcd_grlib_probe(struct platform_device *op)
+static int uhci_hcd_grlib_probe(struct platform_device *op)
 {
         struct device_node *dn = op->dev.of_node;
         struct usb_hcd *hcd;
diff --git a/drivers/usb/host/uhci-platform.c b/drivers/usb/host/uhci-platform.c
index 68ebf20e1519..8c4dace4b14a 100644
--- a/drivers/usb/host/uhci-platform.c
+++ b/drivers/usb/host/uhci-platform.c
@@ -62,7 +62,7 @@ static const struct hc_driver uhci_platform_hc_driver = {
 
 static u64 platform_uhci_dma_mask = DMA_BIT_MASK(32);
 
-static int __devinit uhci_hcd_platform_probe(struct platform_device *pdev)
+static int uhci_hcd_platform_probe(struct platform_device *pdev)
 {
         struct usb_hcd *hcd;
         struct uhci_hcd *uhci;
diff --git a/drivers/usb/host/uhci-q.c b/drivers/usb/host/uhci-q.c
index d2c6f5ac4626..15921fd55048 100644
--- a/drivers/usb/host/uhci-q.c
+++ b/drivers/usb/host/uhci-q.c
@@ -1256,7 +1256,8 @@ static int uhci_submit_isochronous(struct uhci_hcd *uhci, struct urb *urb,
                 struct uhci_qh *qh)
 {
         struct uhci_td *td = NULL;      /* Since urb->number_of_packets > 0 */
-        int i, frame;
+        int i;
+        unsigned frame, next;
         unsigned long destination, status;
         struct urb_priv *urbp = (struct urb_priv *) urb->hcpriv;
 
@@ -1265,37 +1266,29 @@ static int uhci_submit_isochronous(struct uhci_hcd *uhci, struct urb *urb,
                         urb->number_of_packets >= UHCI_NUMFRAMES)
                 return -EFBIG;
 
+        uhci_get_current_frame_number(uhci);
+
         /* Check the period and figure out the starting frame number */
         if (!qh->bandwidth_reserved) {
                 qh->period = urb->interval;
-                if (urb->transfer_flags & URB_ISO_ASAP) {
-                        qh->phase = -1;         /* Find the best phase */
-                        i = uhci_check_bandwidth(uhci, qh);
-                        if (i)
-                                return i;
-
-                        /* Allow a little time to allocate the TDs */
-                        uhci_get_current_frame_number(uhci);
-                        frame = uhci->frame_number + 10;
-
-                        /* Move forward to the first frame having the
-                         * correct phase */
-                        urb->start_frame = frame + ((qh->phase - frame) &
-                                        (qh->period - 1));
-                } else {
-                        i = urb->start_frame - uhci->last_iso_frame;
-                        if (i <= 0 || i >= UHCI_NUMFRAMES)
-                                return -EINVAL;
-                        qh->phase = urb->start_frame & (qh->period - 1);
-                        i = uhci_check_bandwidth(uhci, qh);
-                        if (i)
-                                return i;
-                }
+                qh->phase = -1;         /* Find the best phase */
+                i = uhci_check_bandwidth(uhci, qh);
+                if (i)
+                        return i;
+
+                /* Allow a little time to allocate the TDs */
+                next = uhci->frame_number + 10;
+                frame = qh->phase;
+
+                /* Round up to the first available slot */
+                frame += (next - frame + qh->period - 1) & -qh->period;
 
         } else if (qh->period != urb->interval) {
                 return -EINVAL;         /* Can't change the period */
 
         } else {
+                next = uhci->frame_number + 2;
+
                 /* Find the next unused frame */
                 if (list_empty(&qh->queue)) {
                         frame = qh->iso_frame;
@@ -1308,25 +1301,31 @@ static int uhci_submit_isochronous(struct uhci_hcd *uhci, struct urb *urb,
                                         lurb->number_of_packets *
                                         lurb->interval;
                 }
-                if (urb->transfer_flags & URB_ISO_ASAP) {
-                        /* Skip some frames if necessary to insure
-                         * the start frame is in the future.
+
+                /* Fell behind? */
+                if (uhci_frame_before_eq(frame, next)) {
+
+                        /* USB_ISO_ASAP: Round up to the first available slot */
+                        if (urb->transfer_flags & URB_ISO_ASAP)
+                                frame += (next - frame + qh->period - 1) &
+                                                -qh->period;
+
+                        /*
+                         * Not ASAP: Use the next slot in the stream.  If
+                         * the entire URB falls before the threshold, fail.
                          */
-                        uhci_get_current_frame_number(uhci);
-                        if (uhci_frame_before_eq(frame, uhci->frame_number)) {
-                                frame = uhci->frame_number + 1;
-                                frame += ((qh->phase - frame) &
-                                        (qh->period - 1));
-                        }
-                }       /* Otherwise pick up where the last URB leaves off */
-                urb->start_frame = frame;
+                        else if (!uhci_frame_before_eq(next,
+                                        frame + (urb->number_of_packets - 1) *
+                                                qh->period))
+                                return -EXDEV;
+                }
         }
 
         /* Make sure we won't have to go too far into the future */
         if (uhci_frame_before_eq(uhci->last_iso_frame + UHCI_NUMFRAMES,
-                        urb->start_frame + urb->number_of_packets *
-                                urb->interval))
+                        frame + urb->number_of_packets * urb->interval))
                 return -EFBIG;
+        urb->start_frame = frame;
 
         status = TD_CTRL_ACTIVE | TD_CTRL_IOS;
         destination = (urb->pipe & PIPE_DEVEP_MASK) | usb_packetid(urb->pipe);
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index a686cf4905bb..68914429482f 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -761,12 +761,39 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
                         break;
                 case USB_PORT_FEAT_LINK_STATE:
                         temp = xhci_readl(xhci, port_array[wIndex]);
+
+                        /* Disable port */
+                        if (link_state == USB_SS_PORT_LS_SS_DISABLED) {
+                                xhci_dbg(xhci, "Disable port %d\n", wIndex);
+                                temp = xhci_port_state_to_neutral(temp);
+                                /*
+                                 * Clear all change bits, so that we get a new
+                                 * connection event.
+                                 */
+                                temp |= PORT_CSC | PORT_PEC | PORT_WRC |
+                                        PORT_OCC | PORT_RC | PORT_PLC |
+                                        PORT_CEC;
+                                xhci_writel(xhci, temp | PORT_PE,
+                                        port_array[wIndex]);
+                                temp = xhci_readl(xhci, port_array[wIndex]);
+                                break;
+                        }
+
+                        /* Put link in RxDetect (enable port) */
+                        if (link_state == USB_SS_PORT_LS_RX_DETECT) {
+                                xhci_dbg(xhci, "Enable port %d\n", wIndex);
+                                xhci_set_link_state(xhci, port_array, wIndex,
+                                                link_state);
+                                temp = xhci_readl(xhci, port_array[wIndex]);
+                                break;
+                        }
+
                         /* Software should not attempt to set
-                         * port link state above '5' (Rx.Detect) and the port
+                         * port link state above '3' (U3) and the port
                          * must be enabled.
                          */
                         if ((temp & PORT_PE) == 0 ||
-                                (link_state > USB_SS_PORT_LS_RX_DETECT)) {
+                                (link_state > USB_SS_PORT_LS_U3)) {
                                 xhci_warn(xhci, "Cannot set link state.\n");
                                 goto error;
                         }
@@ -957,6 +984,7 @@ int xhci_hub_status_data(struct usb_hcd *hcd, char *buf)
         int max_ports;
         __le32 __iomem **port_array;
         struct xhci_bus_state *bus_state;
+        bool reset_change = false;
 
         max_ports = xhci_get_ports(hcd, &port_array);
         bus_state = &xhci->bus_state[hcd_index(hcd)];
@@ -988,6 +1016,12 @@ int xhci_hub_status_data(struct usb_hcd *hcd, char *buf)
                         buf[(i + 1) / 8] |= 1 << (i + 1) % 8;
                         status = 1;
                 }
+                if ((temp & PORT_RC))
+                        reset_change = true;
+        }
+        if (!status && !reset_change) {
+                xhci_dbg(xhci, "%s: stopping port polling.\n", __func__);
+                clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
         }
         spin_unlock_irqrestore(&xhci->lock, flags);
         return status ? retval : 0;
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 487bc083dead..35616ffbe3ae 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -205,7 +205,12 @@ static int xhci_alloc_segments_for_ring(struct xhci_hcd *xhci,
 
                 next = xhci_segment_alloc(xhci, cycle_state, flags);
                 if (!next) {
-                        xhci_free_segments_for_ring(xhci, *first);
+                        prev = *first;
+                        while (prev) {
+                                next = prev->next;
+                                xhci_segment_free(xhci, prev);
+                                prev = next;
+                        }
                         return -ENOMEM;
                 }
                 xhci_link_segments(xhci, prev, next, type);
@@ -258,7 +263,7 @@ static struct xhci_ring *xhci_ring_alloc(struct xhci_hcd *xhci,
         return ring;
 
 fail:
-        xhci_ring_free(xhci, ring);
+        kfree(ring);
         return NULL;
 }
 
@@ -1245,6 +1250,8 @@ static unsigned int xhci_microframes_to_exponent(struct usb_device *udev,
 static unsigned int xhci_parse_microframe_interval(struct usb_device *udev,
                 struct usb_host_endpoint *ep)
 {
+        if (ep->desc.bInterval == 0)
+                return 0;
         return xhci_microframes_to_exponent(udev, ep,
                         ep->desc.bInterval, 0, 15);
 }
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index 8345d7c23061..af259e0ec172 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -29,6 +29,7 @@
 /* Device for a quirk */
 #define PCI_VENDOR_ID_FRESCO_LOGIC      0x1b73
 #define PCI_DEVICE_ID_FRESCO_LOGIC_PDK  0x1000
+#define PCI_DEVICE_ID_FRESCO_LOGIC_FL1400       0x1400
 
 #define PCI_VENDOR_ID_ETRON             0x1b6f
 #define PCI_DEVICE_ID_ASROCK_P67        0x7023
@@ -58,8 +59,10 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
 
         /* Look for vendor-specific quirks */
         if (pdev->vendor == PCI_VENDOR_ID_FRESCO_LOGIC &&
-                        pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK) {
-                if (pdev->revision == 0x0) {
+                        (pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK ||
+                         pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_FL1400)) {
+                if (pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK &&
+                                pdev->revision == 0x0) {
                         xhci->quirks |= XHCI_RESET_EP_QUIRK;
                         xhci_dbg(xhci, "QUIRK: Fresco Logic xHC needs configure"
                                         " endpoint cmd after reset endpoint\n");
@@ -218,15 +221,8 @@ static void xhci_pci_remove(struct pci_dev *dev)
 static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
 {
         struct xhci_hcd *xhci = hcd_to_xhci(hcd);
-        int     retval = 0;
 
-        if (hcd->state != HC_STATE_SUSPENDED ||
-                        xhci->shared_hcd->state != HC_STATE_SUSPENDED)
-                return -EINVAL;
-
-        retval = xhci_suspend(xhci);
-
-        return retval;
+        return xhci_suspend(xhci);
 }
 
 static int xhci_pci_resume(struct usb_hcd *hcd, bool hibernated)
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 4e1a8946b8d1..59fb5c677dbe 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -318,7 +318,7 @@ static int xhci_abort_cmd_ring(struct xhci_hcd *xhci)
          * seconds), then it should assume that the there are
          * larger problems with the xHC and assert HCRST.
          */
-        ret = handshake(xhci, &xhci->op_regs->cmd_ring,
+        ret = xhci_handshake(xhci, &xhci->op_regs->cmd_ring,
                         CMD_RING_RUNNING, 0, 5 * 1000 * 1000);
         if (ret < 0) {
                 xhci_err(xhci, "Stopped the command ring failed, "
@@ -1725,6 +1725,15 @@ cleanup:
         if (bogus_port_status)
                 return;
 
+        /*
+         * xHCI port-status-change events occur when the "or" of all the
+         * status-change bits in the portsc register changes from 0 to 1.
+         * New status changes won't cause an event if any other change
+         * bits are still set.  When an event occurs, switch over to
+         * polling to avoid losing status changes.
+         */
+        xhci_dbg(xhci, "%s: starting port polling.\n", __func__);
+        set_bit(HCD_FLAG_POLL_RH, &hcd->flags);
         spin_unlock(&xhci->lock);
         /* Pass this up to the core */
         usb_hcd_poll_rh_status(hcd);
@@ -3071,11 +3080,11 @@ static u32 xhci_td_remainder(unsigned int remainder)
 }
 
 /*
- * For xHCI 1.0 host controllers, TD size is the number of packets remaining in
- * the TD (*not* including this TRB).
+ * For xHCI 1.0 host controllers, TD size is the number of max packet sized
+ * packets remaining in the TD (*not* including this TRB).
  *
  * Total TD packet count = total_packet_count =
- *     roundup(TD size in bytes / wMaxPacketSize)
+ *     DIV_ROUND_UP(TD size in bytes / wMaxPacketSize)
  *
  * Packets transferred up to and including this TRB = packets_transferred =
  *     rounddown(total bytes transferred including this TRB / wMaxPacketSize)
@@ -3083,15 +3092,16 @@ static u32 xhci_td_remainder(unsigned int remainder)
  * TD size = total_packet_count - packets_transferred
  *
  * It must fit in bits 21:17, so it can't be bigger than 31.
+ * The last TRB in a TD must have the TD size set to zero.
  */
-
 static u32 xhci_v1_0_td_remainder(int running_total, int trb_buff_len,
-                unsigned int total_packet_count, struct urb *urb)
+                unsigned int total_packet_count, struct urb *urb,
+                unsigned int num_trbs_left)
 {
         int packets_transferred;
 
         /* One TRB with a zero-length data packet. */
-        if (running_total == 0 && trb_buff_len == 0)
+        if (num_trbs_left == 0 || (running_total == 0 && trb_buff_len == 0))
                 return 0;
 
         /* All the TRB queueing functions don't count the current TRB in
@@ -3100,7 +3110,9 @@ static u32 xhci_v1_0_td_remainder(int running_total, int trb_buff_len,
         packets_transferred = (running_total + trb_buff_len) /
                 usb_endpoint_maxp(&urb->ep->desc);
 
-        return xhci_td_remainder(total_packet_count - packets_transferred);
+        if ((total_packet_count - packets_transferred) > 31)
+                return 31 << 17;
+        return (total_packet_count - packets_transferred) << 17;
 }
 
 static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
@@ -3127,7 +3139,7 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 
         num_trbs = count_sg_trbs_needed(xhci, urb);
         num_sgs = urb->num_mapped_sgs;
-        total_packet_count = roundup(urb->transfer_buffer_length,
+        total_packet_count = DIV_ROUND_UP(urb->transfer_buffer_length,
                         usb_endpoint_maxp(&urb->ep->desc));
 
         trb_buff_len = prepare_transfer(xhci, xhci->devs[slot_id],
@@ -3210,7 +3222,8 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
                                         running_total);
                 } else {
                         remainder = xhci_v1_0_td_remainder(running_total,
-                                        trb_buff_len, total_packet_count, urb);
+                                        trb_buff_len, total_packet_count, urb,
+                                        num_trbs - 1);
                 }
                 length_field = TRB_LEN(trb_buff_len) |
                         remainder |
@@ -3318,7 +3331,7 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
         start_cycle = ep_ring->cycle_state;
 
         running_total = 0;
-        total_packet_count = roundup(urb->transfer_buffer_length,
+        total_packet_count = DIV_ROUND_UP(urb->transfer_buffer_length,
                         usb_endpoint_maxp(&urb->ep->desc));
         /* How much data is in the first TRB? */
         addr = (u64) urb->transfer_dma;
@@ -3364,7 +3377,8 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
                                         running_total);
                 } else {
                         remainder = xhci_v1_0_td_remainder(running_total,
-                                        trb_buff_len, total_packet_count, urb);
+                                        trb_buff_len, total_packet_count, urb,
+                                        num_trbs - 1);
                 }
                 length_field = TRB_LEN(trb_buff_len) |
                         remainder |
@@ -3627,7 +3641,7 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
                 addr = start_addr + urb->iso_frame_desc[i].offset;
                 td_len = urb->iso_frame_desc[i].length;
                 td_remain_len = td_len;
-                total_packet_count = roundup(td_len,
+                total_packet_count = DIV_ROUND_UP(td_len,
                                 usb_endpoint_maxp(&urb->ep->desc));
                 /* A zero-length transfer still involves at least one packet. */
                 if (total_packet_count == 0)
@@ -3706,7 +3720,8 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
                         } else {
                                 remainder = xhci_v1_0_td_remainder(
                                                 running_total, trb_buff_len,
-                                                total_packet_count, urb);
+                                                total_packet_count, urb,
+                                                (trbs_per_td - j - 1));
                         }
                         length_field = TRB_LEN(trb_buff_len) |
                                 remainder |
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index c9e419f29b74..f1f01a834ba7 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -40,7 +40,7 @@ MODULE_PARM_DESC(link_quirk, "Don't clear the chain bit on a link TRB");
 
 /* TODO: copied from ehci-hcd.c - can this be refactored? */
 /*
- * handshake - spin reading hc until handshake completes or fails
+ * xhci_handshake - spin reading hc until handshake completes or fails
  * @ptr: address of hc register to be read
  * @mask: bits to look at in result of read
  * @done: value of those bits when handshake succeeds
@@ -52,7 +52,7 @@ MODULE_PARM_DESC(link_quirk, "Don't clear the chain bit on a link TRB");
  * handshake done).  There are two failure modes:  "usec" have passed (major
  * hardware flakeout), or the register reads as all-ones (hardware removed).
  */
-int handshake(struct xhci_hcd *xhci, void __iomem *ptr,
+int xhci_handshake(struct xhci_hcd *xhci, void __iomem *ptr,
                       u32 mask, u32 done, int usec)
 {
         u32     result;
@@ -103,7 +103,7 @@ int xhci_halt(struct xhci_hcd *xhci)
         xhci_dbg(xhci, "// Halt the HC\n");
         xhci_quiesce(xhci);
 
-        ret = handshake(xhci, &xhci->op_regs->status,
+        ret = xhci_handshake(xhci, &xhci->op_regs->status,
                         STS_HALT, STS_HALT, XHCI_MAX_HALT_USEC);
         if (!ret) {
                 xhci->xhc_state |= XHCI_STATE_HALTED;
@@ -132,7 +132,7 @@ static int xhci_start(struct xhci_hcd *xhci)
          * Wait for the HCHalted Status bit to be 0 to indicate the host is
          * running.
          */
-        ret = handshake(xhci, &xhci->op_regs->status,
+        ret = xhci_handshake(xhci, &xhci->op_regs->status,
                         STS_HALT, 0, XHCI_MAX_HALT_USEC);
         if (ret == -ETIMEDOUT)
                 xhci_err(xhci, "Host took too long to start, "
@@ -167,7 +167,7 @@ int xhci_reset(struct xhci_hcd *xhci)
         command |= CMD_RESET;
         xhci_writel(xhci, command, &xhci->op_regs->command);
 
-        ret = handshake(xhci, &xhci->op_regs->command,
+        ret = xhci_handshake(xhci, &xhci->op_regs->command,
                         CMD_RESET, 0, 10 * 1000 * 1000);
         if (ret)
                 return ret;
@@ -177,7 +177,7 @@ int xhci_reset(struct xhci_hcd *xhci)
          * xHCI cannot write to any doorbells or operational registers other
          * than status until the "Controller Not Ready" flag is cleared.
          */
-        ret = handshake(xhci, &xhci->op_regs->status,
+        ret = xhci_handshake(xhci, &xhci->op_regs->status,
                         STS_CNR, 0, 10 * 1000 * 1000);
 
         for (i = 0; i < 2; ++i) {
@@ -480,7 +480,7 @@ static bool compliance_mode_recovery_timer_quirk_check(void)
         if (strstr(dmi_product_name, "Z420") ||
                         strstr(dmi_product_name, "Z620") ||
                         strstr(dmi_product_name, "Z820") ||
-                        strstr(dmi_product_name, "Z1"))
+                        strstr(dmi_product_name, "Z1 Workstation"))
                 return true;
 
         return false;
@@ -880,6 +880,15 @@ int xhci_suspend(struct xhci_hcd *xhci)
         struct usb_hcd          *hcd = xhci_to_hcd(xhci);
         u32                     command;
 
+        if (hcd->state != HC_STATE_SUSPENDED ||
+                        xhci->shared_hcd->state != HC_STATE_SUSPENDED)
+                return -EINVAL;
+
+        /* Don't poll the roothubs on bus suspend. */
+        xhci_dbg(xhci, "%s: stopping port polling.\n", __func__);
+        clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
+        del_timer_sync(&hcd->rh_timer);
+
         spin_lock_irq(&xhci->lock);
         clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
         clear_bit(HCD_FLAG_HW_ACCESSIBLE, &xhci->shared_hcd->flags);
@@ -890,7 +899,7 @@ int xhci_suspend(struct xhci_hcd *xhci)
         command = xhci_readl(xhci, &xhci->op_regs->command);
         command &= ~CMD_RUN;
         xhci_writel(xhci, command, &xhci->op_regs->command);
-        if (handshake(xhci, &xhci->op_regs->status,
+        if (xhci_handshake(xhci, &xhci->op_regs->status,
                       STS_HALT, STS_HALT, XHCI_MAX_HALT_USEC)) {
                 xhci_warn(xhci, "WARN: xHC CMD_RUN timeout\n");
                 spin_unlock_irq(&xhci->lock);
@@ -905,7 +914,8 @@ int xhci_suspend(struct xhci_hcd *xhci)
         command = xhci_readl(xhci, &xhci->op_regs->command);
         command |= CMD_CSS;
         xhci_writel(xhci, command, &xhci->op_regs->command);
-        if (handshake(xhci, &xhci->op_regs->status, STS_SAVE, 0, 10 * 1000)) {
+        if (xhci_handshake(xhci, &xhci->op_regs->status,
+                                STS_SAVE, 0, 10 * 1000)) {
                 xhci_warn(xhci, "WARN: xHC save state timeout\n");
                 spin_unlock_irq(&xhci->lock);
                 return -ETIMEDOUT;
@@ -967,7 +977,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
                 command = xhci_readl(xhci, &xhci->op_regs->command);
                 command |= CMD_CRS;
                 xhci_writel(xhci, command, &xhci->op_regs->command);
-                if (handshake(xhci, &xhci->op_regs->status,
+                if (xhci_handshake(xhci, &xhci->op_regs->status,
                               STS_RESTORE, 0, 10 * 1000)) {
                         xhci_warn(xhci, "WARN: xHC restore state timeout\n");
                         spin_unlock_irq(&xhci->lock);
@@ -1035,7 +1045,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
         command = xhci_readl(xhci, &xhci->op_regs->command);
         command |= CMD_RUN;
         xhci_writel(xhci, command, &xhci->op_regs->command);
-        handshake(xhci, &xhci->op_regs->status, STS_HALT,
+        xhci_handshake(xhci, &xhci->op_regs->status, STS_HALT,
                   0, 250 * 1000);
 
         /* step 5: walk topology and initialize portsc,
@@ -1064,6 +1074,11 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
         if (xhci->quirks & XHCI_COMP_MODE_QUIRK)
                 compliance_mode_recovery_timer_init(xhci);
 
+        /* Re-enable port polling. */
+        xhci_dbg(xhci, "%s: starting port polling.\n", __func__);
+        set_bit(HCD_FLAG_POLL_RH, &hcd->flags);
+        usb_hcd_poll_rh_status(hcd);
+
         return retval;
 }
 #endif  /* CONFIG_PM */
@@ -2254,7 +2269,7 @@ static bool xhci_is_async_ep(unsigned int ep_type)
 
 static bool xhci_is_sync_in_ep(unsigned int ep_type)
 {
-        return (ep_type == ISOC_IN_EP || ep_type != INT_IN_EP);
+        return (ep_type == ISOC_IN_EP || ep_type == INT_IN_EP);
 }
 
 static unsigned int xhci_get_ss_bw_consumed(struct xhci_bw_info *ep_bw)
@@ -3874,7 +3889,8 @@ static int xhci_usb2_software_lpm_test(struct usb_hcd *hcd,
         spin_lock_irqsave(&xhci->lock, flags);
 
         /* Check L1 Status */
-        ret = handshake(xhci, pm_addr, PORT_L1S_MASK, PORT_L1S_SUCCESS, 125);
+        ret = xhci_handshake(xhci, pm_addr,
+                        PORT_L1S_MASK, PORT_L1S_SUCCESS, 125);
         if (ret != -ETIMEDOUT) {
                 /* enter L1 successfully */
                 temp = xhci_readl(xhci, addr);
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 53df4e70ca07..f791bd0aee6c 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1720,7 +1720,7 @@ static inline void xhci_unregister_plat(void)
 
 /* xHCI host controller glue */
 typedef void (*xhci_get_quirks_t)(struct device *, struct xhci_hcd *);
-int handshake(struct xhci_hcd *xhci, void __iomem *ptr,
+int xhci_handshake(struct xhci_hcd *xhci, void __iomem *ptr,
                 u32 mask, u32 done, int usec);
 void xhci_quiesce(struct xhci_hcd *xhci);
 int xhci_halt(struct xhci_hcd *xhci);
diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig
index a8f05239350e..fecde69bfa7d 100644
--- a/drivers/usb/misc/Kconfig
+++ b/drivers/usb/misc/Kconfig
@@ -246,6 +246,7 @@ config USB_YUREX
 
 config USB_EZUSB_FX2
         tristate "Functions for loading firmware on EZUSB chips"
+        depends on USB
         help
           Say Y here if you need EZUSB device support.
           (Cypress FX/FX2/FX2LP microcontrollers)
diff --git a/drivers/usb/misc/ezusb.c b/drivers/usb/misc/ezusb.c
index 6589268a6515..e712afed947c 100644
--- a/drivers/usb/misc/ezusb.c
+++ b/drivers/usb/misc/ezusb.c
@@ -15,6 +15,7 @@
 #include <linux/usb.h>
 #include <linux/firmware.h>
 #include <linux/ihex.h>
+#include <linux/usb/ezusb.h>
 
 struct ezusb_fx_type {
         /* EZ-USB Control and Status Register.  Bit 0 controls 8051 reset */
@@ -22,21 +23,16 @@ struct ezusb_fx_type {
         unsigned short max_internal_adress;
 };
 
-struct ezusb_fx_type ezusb_fx1 = {
+static struct ezusb_fx_type ezusb_fx1 = {
         .cpucs_reg = 0x7F92,
         .max_internal_adress = 0x1B3F,
 };
 
-struct ezusb_fx_type ezusb_fx2 = {
-        .cpucs_reg = 0xE600,
-        .max_internal_adress = 0x3FFF,
-};
-
 /* Commands for writing to memory */
 #define WRITE_INT_RAM 0xA0
 #define WRITE_EXT_RAM 0xA3
 
-int ezusb_writememory(struct usb_device *dev, int address,
+static int ezusb_writememory(struct usb_device *dev, int address,
                                 unsigned char *data, int length, __u8 request)
 {
         int result;
@@ -58,10 +54,9 @@ int ezusb_writememory(struct usb_device *dev, int address,
         kfree(transfer_buffer);
         return result;
 }
-EXPORT_SYMBOL_GPL(ezusb_writememory);
 
-int ezusb_set_reset(struct usb_device *dev, unsigned short cpucs_reg,
-                         unsigned char reset_bit)
+static int ezusb_set_reset(struct usb_device *dev, unsigned short cpucs_reg,
+                           unsigned char reset_bit)
 {
         int response = ezusb_writememory(dev, cpucs_reg, &reset_bit, 1, WRITE_INT_RAM);
         if (response < 0)
@@ -76,12 +71,6 @@ int ezusb_fx1_set_reset(struct usb_device *dev, unsigned char reset_bit)
 }
 EXPORT_SYMBOL_GPL(ezusb_fx1_set_reset);
 
-int ezusb_fx2_set_reset(struct usb_device *dev, unsigned char reset_bit)
-{
-        return ezusb_set_reset(dev, ezusb_fx2.cpucs_reg, reset_bit);
-}
-EXPORT_SYMBOL_GPL(ezusb_fx2_set_reset);
-
 static int ezusb_ihex_firmware_download(struct usb_device *dev,
                                         struct ezusb_fx_type fx,
                                         const char *firmware_path)
@@ -151,11 +140,28 @@ int ezusb_fx1_ihex_firmware_download(struct usb_device *dev,
 }
 EXPORT_SYMBOL_GPL(ezusb_fx1_ihex_firmware_download);
 
+#if 0
+/*
+ * Once someone one needs these fx2 functions, uncomment them
+ * and add them to ezusb.h and all should be good.
+ */
+static struct ezusb_fx_type ezusb_fx2 = {
+        .cpucs_reg = 0xE600,
+        .max_internal_adress = 0x3FFF,
+};
+
+int ezusb_fx2_set_reset(struct usb_device *dev, unsigned char reset_bit)
+{
+        return ezusb_set_reset(dev, ezusb_fx2.cpucs_reg, reset_bit);
+}
+EXPORT_SYMBOL_GPL(ezusb_fx2_set_reset);
+
 int ezusb_fx2_ihex_firmware_download(struct usb_device *dev,
                                      const char *firmware_path)
 {
         return ezusb_ihex_firmware_download(dev, ezusb_fx2, firmware_path);
 }
 EXPORT_SYMBOL_GPL(ezusb_fx2_ihex_firmware_download);
+#endif
 
 MODULE_LICENSE("GPL");
diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c
index 055b84adedac..268148de9714 100644
--- a/drivers/usb/misc/usbtest.c
+++ b/drivers/usb/misc/usbtest.c
@@ -423,6 +423,9 @@ alloc_sglist(int nents, int max, int vary)
         unsigned                i;
         unsigned                size = max;
 
+        if (max == 0)
+                return NULL;
+
         sg = kmalloc_array(nents, sizeof *sg, GFP_KERNEL);
         if (!sg)
                 return NULL;
@@ -2176,7 +2179,7 @@ usbtest_ioctl(struct usb_interface *intf, unsigned int code, void *buf)
                 if (dev->out_pipe == 0 || !param->length || param->sglen < 4)
                         break;
                 retval = 0;
-                dev_info(&intf->dev, "TEST 17:  unlink from %d queues of "
+                dev_info(&intf->dev, "TEST 24:  unlink from %d queues of "
                                 "%d %d-byte writes\n",
                                 param->iterations, param->sglen, param->length);
                 for (i = param->iterations; retval == 0 && i > 0; --i) {
@@ -2386,6 +2389,7 @@ static struct usbtest_info gz_info = {
         .name           = "Linux gadget zero",
         .autoconf       = 1,
         .ctrl_out       = 1,
+        .iso            = 1,
         .alt            = 0,
 };
 
diff --git a/drivers/usb/musb/am35x.c b/drivers/usb/musb/am35x.c
index c964d6af178b..c107d7cdfa69 100644
--- a/drivers/usb/musb/am35x.c
+++ b/drivers/usb/musb/am35x.c
@@ -34,8 +34,7 @@
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 #include <linux/usb/nop-usb-xceiv.h>
-
-#include <plat/usb.h>
+#include <linux/platform_data/usb-omap.h>
 
 #include "musb_core.h"
 
@@ -455,7 +454,7 @@ static const struct musb_platform_ops am35x_ops = {
 
 static u64 am35x_dmamask = DMA_BIT_MASK(32);
 
-static int __devinit am35x_probe(struct platform_device *pdev)
+static int am35x_probe(struct platform_device *pdev)
 {
         struct musb_hdrc_platform_data  *pdata = pdev->dev.platform_data;
         struct platform_device          *musb;
@@ -465,7 +464,6 @@ static int __devinit am35x_probe(struct platform_device *pdev)
         struct clk                      *clk;
 
         int                             ret = -ENOMEM;
-        int                             musbid;
 
         glue = kzalloc(sizeof(*glue), GFP_KERNEL);
         if (!glue) {
@@ -473,18 +471,10 @@ static int __devinit am35x_probe(struct platform_device *pdev)
                 goto err0;
         }
 
-        /* get the musb id */
-        musbid = musb_get_id(&pdev->dev, GFP_KERNEL);
-        if (musbid < 0) {
-                dev_err(&pdev->dev, "failed to allocate musb id\n");
-                ret = -ENOMEM;
-                goto err1;
-        }
-
-        musb = platform_device_alloc("musb-hdrc", musbid);
+        musb = platform_device_alloc("musb-hdrc", PLATFORM_DEVID_AUTO);
         if (!musb) {
                 dev_err(&pdev->dev, "failed to allocate musb device\n");
-                goto err2;
+                goto err1;
         }
 
         phy_clk = clk_get(&pdev->dev, "fck");
@@ -513,7 +503,6 @@ static int __devinit am35x_probe(struct platform_device *pdev)
                 goto err6;
         }
 
-        musb->id                        = musbid;
         musb->dev.parent                = &pdev->dev;
         musb->dev.dma_mask              = &am35x_dmamask;
         musb->dev.coherent_dma_mask     = am35x_dmamask;
@@ -563,9 +552,6 @@ err4:
 err3:
         platform_device_put(musb);
 
-err2:
-        musb_put_id(&pdev->dev, musbid);
-
 err1:
         kfree(glue);
 
@@ -573,13 +559,11 @@ err0:
         return ret;
 }
 
-static int __devexit am35x_remove(struct platform_device *pdev)
+static int am35x_remove(struct platform_device *pdev)
 {
         struct am35x_glue       *glue = platform_get_drvdata(pdev);
 
-        musb_put_id(&pdev->dev, glue->musb->id);
-        platform_device_del(glue->musb);
-        platform_device_put(glue->musb);
+        platform_device_unregister(glue->musb);
         clk_disable(glue->clk);
         clk_disable(glue->phy_clk);
         clk_put(glue->clk);
@@ -644,7 +628,7 @@ static struct dev_pm_ops am35x_pm_ops = {
 
 static struct platform_driver am35x_driver = {
         .probe          = am35x_probe,
-        .remove         = __devexit_p(am35x_remove),
+        .remove         = am35x_remove,
         .driver         = {
                 .name   = "musb-am35x",
                 .pm     = DEV_PM_OPS,
@@ -654,15 +638,4 @@ static struct platform_driver am35x_driver = {
 MODULE_DESCRIPTION("AM35x MUSB Glue Layer");
 MODULE_AUTHOR("Ajay Kumar Gupta <ajay.gupta@ti.com>");
 MODULE_LICENSE("GPL v2");
-
-static int __init am35x_init(void)
-{
-        return platform_driver_register(&am35x_driver);
-}
-module_init(am35x_init);
-
-static void __exit am35x_exit(void)
-{
-        platform_driver_unregister(&am35x_driver);
-}
-module_exit(am35x_exit);
+module_platform_driver(am35x_driver);
diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c
index e8cff9bb9d23..14dab9f9b3d0 100644
--- a/drivers/usb/musb/blackfin.c
+++ b/drivers/usb/musb/blackfin.c
@@ -448,14 +448,13 @@ static const struct musb_platform_ops bfin_ops = {
 
 static u64 bfin_dmamask = DMA_BIT_MASK(32);
 
-static int __devinit bfin_probe(struct platform_device *pdev)
+static int bfin_probe(struct platform_device *pdev)
 {
         struct musb_hdrc_platform_data  *pdata = pdev->dev.platform_data;
         struct platform_device          *musb;
         struct bfin_glue                *glue;
 
         int                             ret = -ENOMEM;
-        int                             musbid;
 
         glue = kzalloc(sizeof(*glue), GFP_KERNEL);
         if (!glue) {
@@ -463,21 +462,12 @@ static int __devinit bfin_probe(struct platform_device *pdev)
                 goto err0;
         }
 
-        /* get the musb id */
-        musbid = musb_get_id(&pdev->dev, GFP_KERNEL);
-        if (musbid < 0) {
-                dev_err(&pdev->dev, "failed to allocate musb id\n");
-                ret = -ENOMEM;
-                goto err1;
-        }
-
-        musb = platform_device_alloc("musb-hdrc", musbid);
+        musb = platform_device_alloc("musb-hdrc", PLATFORM_DEVID_AUTO);
         if (!musb) {
                 dev_err(&pdev->dev, "failed to allocate musb device\n");
-                goto err2;
+                goto err1;
         }
 
-        musb->id                        = musbid;
         musb->dev.parent                = &pdev->dev;
         musb->dev.dma_mask              = &bfin_dmamask;
         musb->dev.coherent_dma_mask     = bfin_dmamask;
@@ -513,9 +503,6 @@ static int __devinit bfin_probe(struct platform_device *pdev)
 err3:
         platform_device_put(musb);
 
-err2:
-        musb_put_id(&pdev->dev, musbid);
-
 err1:
         kfree(glue);
 
@@ -523,13 +510,11 @@ err0:
         return ret;
 }
 
-static int __devexit bfin_remove(struct platform_device *pdev)
+static int bfin_remove(struct platform_device *pdev)
 {
         struct bfin_glue                *glue = platform_get_drvdata(pdev);
 
-        musb_put_id(&pdev->dev, glue->musb->id);
-        platform_device_del(glue->musb);
-        platform_device_put(glue->musb);
+        platform_device_unregister(glue->musb);
         kfree(glue);
 
         return 0;
@@ -585,15 +570,4 @@ static struct platform_driver bfin_driver = {
 MODULE_DESCRIPTION("Blackfin MUSB Glue Layer");
 MODULE_AUTHOR("Bryan Wy <cooloney@kernel.org>");
 MODULE_LICENSE("GPL v2");
-
-static int __init bfin_init(void)
-{
-        return platform_driver_register(&bfin_driver);
-}
-module_init(bfin_init);
-
-static void __exit bfin_exit(void)
-{
-        platform_driver_unregister(&bfin_driver);
-}
-module_exit(bfin_exit);
+module_platform_driver(bfin_driver);
diff --git a/drivers/usb/musb/cppi_dma.c b/drivers/usb/musb/cppi_dma.c
index e19da82b4782..0968dd7a859d 100644
--- a/drivers/usb/musb/cppi_dma.c
+++ b/drivers/usb/musb/cppi_dma.c
@@ -1314,10 +1314,10 @@ irqreturn_t cppi_interrupt(int irq, void *dev_id)
 
         return IRQ_HANDLED;
 }
+EXPORT_SYMBOL_GPL(cppi_interrupt);
 
 /* Instantiate a software object representing a DMA controller. */
-struct dma_controller *__devinit
-dma_controller_create(struct musb *musb, void __iomem *mregs)
+struct dma_controller *dma_controller_create(struct musb *musb, void __iomem *mregs)
 {
         struct cppi             *controller;
         struct device           *dev = musb->controller;
diff --git a/drivers/usb/musb/da8xx.c b/drivers/usb/musb/da8xx.c
index 8bc44b76eec2..97996af2646e 100644
--- a/drivers/usb/musb/da8xx.c
+++ b/drivers/usb/musb/da8xx.c
@@ -471,7 +471,7 @@ static const struct musb_platform_ops da8xx_ops = {
 
 static u64 da8xx_dmamask = DMA_BIT_MASK(32);
 
-static int __devinit da8xx_probe(struct platform_device *pdev)
+static int da8xx_probe(struct platform_device *pdev)
 {
         struct musb_hdrc_platform_data  *pdata = pdev->dev.platform_data;
         struct platform_device          *musb;
@@ -480,7 +480,6 @@ static int __devinit da8xx_probe(struct platform_device *pdev)
         struct clk                      *clk;
 
         int                             ret = -ENOMEM;
-        int                             musbid;
 
         glue = kzalloc(sizeof(*glue), GFP_KERNEL);
         if (!glue) {
@@ -488,18 +487,10 @@ static int __devinit da8xx_probe(struct platform_device *pdev)
                 goto err0;
         }
 
-        /* get the musb id */
-        musbid = musb_get_id(&pdev->dev, GFP_KERNEL);
-        if (musbid < 0) {
-                dev_err(&pdev->dev, "failed to allocate musb id\n");
-                ret = -ENOMEM;
-                goto err1;
-        }
-
-        musb = platform_device_alloc("musb-hdrc", musbid);
+        musb = platform_device_alloc("musb-hdrc", PLATFORM_DEVID_AUTO);
         if (!musb) {
                 dev_err(&pdev->dev, "failed to allocate musb device\n");
-                goto err2;
+                goto err1;
         }
 
         clk = clk_get(&pdev->dev, "usb20");
@@ -515,7 +506,6 @@ static int __devinit da8xx_probe(struct platform_device *pdev)
                 goto err4;
         }
 
-        musb->id                        = musbid;
         musb->dev.parent                = &pdev->dev;
         musb->dev.dma_mask              = &da8xx_dmamask;
         musb->dev.coherent_dma_mask     = da8xx_dmamask;
@@ -558,9 +548,6 @@ err4:
 err3:
         platform_device_put(musb);
 
-err2:
-        musb_put_id(&pdev->dev, musbid);
-
 err1:
         kfree(glue);
 
@@ -568,13 +555,11 @@ err0:
         return ret;
 }
 
-static int __devexit da8xx_remove(struct platform_device *pdev)
+static int da8xx_remove(struct platform_device *pdev)
 {
         struct da8xx_glue               *glue = platform_get_drvdata(pdev);
 
-        musb_put_id(&pdev->dev, glue->musb->id);
-        platform_device_del(glue->musb);
-        platform_device_put(glue->musb);
+        platform_device_unregister(glue->musb);
         clk_disable(glue->clk);
         clk_put(glue->clk);
         kfree(glue);
@@ -584,7 +569,7 @@ static int __devexit da8xx_remove(struct platform_device *pdev)
 
 static struct platform_driver da8xx_driver = {
         .probe          = da8xx_probe,
-        .remove         = __devexit_p(da8xx_remove),
+        .remove         = da8xx_remove,
         .driver         = {
                 .name   = "musb-da8xx",
         },
@@ -593,15 +578,4 @@ static struct platform_driver da8xx_driver = {
 MODULE_DESCRIPTION("DA8xx/OMAP-L1x MUSB Glue Layer");
 MODULE_AUTHOR("Sergei Shtylyov <sshtylyov@ru.mvista.com>");
 MODULE_LICENSE("GPL v2");
-
-static int __init da8xx_init(void)
-{
-        return platform_driver_register(&da8xx_driver);
-}
-module_init(da8xx_init);
-
-static void __exit da8xx_exit(void)
-{
-        platform_driver_unregister(&da8xx_driver);
-}
-module_exit(da8xx_exit);
+module_platform_driver(da8xx_driver);
diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c
index 606bfd00cde6..b1c01cad28b2 100644
--- a/drivers/usb/musb/davinci.c
+++ b/drivers/usb/musb/davinci.c
@@ -504,7 +504,7 @@ static const struct musb_platform_ops davinci_ops = {
 
 static u64 davinci_dmamask = DMA_BIT_MASK(32);
 
-static int __devinit davinci_probe(struct platform_device *pdev)
+static int davinci_probe(struct platform_device *pdev)
 {
         struct musb_hdrc_platform_data  *pdata = pdev->dev.platform_data;
         struct platform_device          *musb;
@@ -512,7 +512,6 @@ static int __devinit davinci_probe(struct platform_device *pdev)
         struct clk                      *clk;
 
         int                             ret = -ENOMEM;
-        int                             musbid;
 
         glue = kzalloc(sizeof(*glue), GFP_KERNEL);
         if (!glue) {
@@ -520,18 +519,10 @@ static int __devinit davinci_probe(struct platform_device *pdev)
                 goto err0;
         }
 
-        /* get the musb id */
-        musbid = musb_get_id(&pdev->dev, GFP_KERNEL);
-        if (musbid < 0) {
-                dev_err(&pdev->dev, "failed to allocate musb id\n");
-                ret = -ENOMEM;
-                goto err1;
-        }
-
-        musb = platform_device_alloc("musb-hdrc", musbid);
+        musb = platform_device_alloc("musb-hdrc", PLATFORM_DEVID_AUTO);
         if (!musb) {
                 dev_err(&pdev->dev, "failed to allocate musb device\n");
-                goto err2;
+                goto err1;
         }
 
         clk = clk_get(&pdev->dev, "usb");
@@ -547,7 +538,6 @@ static int __devinit davinci_probe(struct platform_device *pdev)
                 goto err4;
         }
 
-        musb->id                        = musbid;
         musb->dev.parent                = &pdev->dev;
         musb->dev.dma_mask              = &davinci_dmamask;
         musb->dev.coherent_dma_mask     = davinci_dmamask;
@@ -590,9 +580,6 @@ err4:
 err3:
         platform_device_put(musb);
 
-err2:
-        musb_put_id(&pdev->dev, musbid);
-
 err1:
         kfree(glue);
 
@@ -600,13 +587,11 @@ err0:
         return ret;
 }
 
-static int __devexit davinci_remove(struct platform_device *pdev)
+static int davinci_remove(struct platform_device *pdev)
 {
         struct davinci_glue             *glue = platform_get_drvdata(pdev);
 
-        musb_put_id(&pdev->dev, glue->musb->id);
-        platform_device_del(glue->musb);
-        platform_device_put(glue->musb);
+        platform_device_unregister(glue->musb);
         clk_disable(glue->clk);
         clk_put(glue->clk);
         kfree(glue);
@@ -616,7 +601,7 @@ static int __devexit davinci_remove(struct platform_device *pdev)
 
 static struct platform_driver davinci_driver = {
         .probe          = davinci_probe,
-        .remove         = __devexit_p(davinci_remove),
+        .remove         = davinci_remove,
         .driver         = {
                 .name   = "musb-davinci",
         },
@@ -625,15 +610,4 @@ static struct platform_driver davinci_driver = {
 MODULE_DESCRIPTION("DaVinci MUSB Glue Layer");
 MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>");
 MODULE_LICENSE("GPL v2");
-
-static int __init davinci_init(void)
-{
-        return platform_driver_register(&davinci_driver);
-}
-module_init(davinci_init);
-
-static void __exit davinci_exit(void)
-{
-        platform_driver_unregister(&davinci_driver);
-}
-module_exit(davinci_exit);
+module_platform_driver(davinci_driver);
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index bb56a0e8b23b..fd3486745e64 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -116,7 +116,6 @@
 
 #define MUSB_DRIVER_NAME "musb-hdrc"
 const char musb_driver_name[] = MUSB_DRIVER_NAME;
-static DEFINE_IDA(musb_ida);
 
 MODULE_DESCRIPTION(DRIVER_INFO);
 MODULE_AUTHOR(DRIVER_AUTHOR);
@@ -133,35 +132,6 @@ static inline struct musb *dev_to_musb(struct device *dev)
 
 /*-------------------------------------------------------------------------*/
 
-int musb_get_id(struct device *dev, gfp_t gfp_mask)
-{
-        int ret;
-        int id;
-
-        ret = ida_pre_get(&musb_ida, gfp_mask);
-        if (!ret) {
-                dev_err(dev, "failed to reserve resource for id\n");
-                return -ENOMEM;
-        }
-
-        ret = ida_get_new(&musb_ida, &id);
-        if (ret < 0) {
-                dev_err(dev, "failed to allocate a new id\n");
-                return ret;
-        }
-
-        return id;
-}
-EXPORT_SYMBOL_GPL(musb_get_id);
-
-void musb_put_id(struct device *dev, int id)
-{
-
-        dev_dbg(dev, "removing id %d\n", id);
-        ida_remove(&musb_ida, id);
-}
-EXPORT_SYMBOL_GPL(musb_put_id);
-
 #ifndef CONFIG_BLACKFIN
 static int musb_ulpi_read(struct usb_phy *phy, u32 offset)
 {
@@ -281,7 +251,7 @@ void musb_write_fifo(struct musb_hw_ep *hw_ep, u16 len, const u8 *src)
                 /* best case is 32bit-aligned source address */
                 if ((0x02 & (unsigned long) src) == 0) {
                         if (len >= 4) {
-                                writesl(fifo, src + index, len >> 2);
+                                iowrite32_rep(fifo, src + index, len >> 2);
                                 index += len & ~0x03;
                         }
                         if (len & 0x02) {
@@ -290,7 +260,7 @@ void musb_write_fifo(struct musb_hw_ep *hw_ep, u16 len, const u8 *src)
                         }
                 } else {
                         if (len >= 2) {
-                                writesw(fifo, src + index, len >> 1);
+                                iowrite16_rep(fifo, src + index, len >> 1);
                                 index += len & ~0x01;
                         }
                 }
@@ -298,7 +268,7 @@ void musb_write_fifo(struct musb_hw_ep *hw_ep, u16 len, const u8 *src)
                         musb_writeb(fifo, 0, src[index]);
         } else  {
                 /* byte aligned */
-                writesb(fifo, src, len);
+                iowrite8_rep(fifo, src, len);
         }
 }
 
@@ -324,7 +294,7 @@ void musb_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *dst)
                 /* best case is 32bit-aligned destination address */
                 if ((0x02 & (unsigned long) dst) == 0) {
                         if (len >= 4) {
-                                readsl(fifo, dst, len >> 2);
+                                ioread32_rep(fifo, dst, len >> 2);
                                 index = len & ~0x03;
                         }
                         if (len & 0x02) {
@@ -333,7 +303,7 @@ void musb_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *dst)
                         }
                 } else {
                         if (len >= 2) {
-                                readsw(fifo, dst, len >> 1);
+                                ioread16_rep(fifo, dst, len >> 1);
                                 index = len & ~0x01;
                         }
                 }
@@ -341,7 +311,7 @@ void musb_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *dst)
                         dst[index] = musb_readb(fifo, 0);
         } else  {
                 /* byte aligned */
-                readsb(fifo, dst, len);
+                ioread8_rep(fifo, dst, len);
         }
 }
 #endif
@@ -467,12 +437,12 @@ void musb_hnp_stop(struct musb *musb)
  */
 
 static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
-                                u8 devctl, u8 power)
+                                u8 devctl)
 {
         struct usb_otg *otg = musb->xceiv->otg;
         irqreturn_t handled = IRQ_NONE;
 
-        dev_dbg(musb->controller, "<== Power=%02x, DevCtl=%02x, int_usb=0x%x\n", power, devctl,
+        dev_dbg(musb->controller, "<== DevCtl=%02x, int_usb=0x%x\n", devctl,
                 int_usb);
 
         /* in host mode, the peripheral may issue remote wakeup.
@@ -485,6 +455,7 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
 
                 if (devctl & MUSB_DEVCTL_HM) {
                         void __iomem *mbase = musb->mregs;
+                        u8 power;
 
                         switch (musb->xceiv->state) {
                         case OTG_STATE_A_SUSPEND:
@@ -492,6 +463,7 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
                                  * will stop RESUME signaling
                                  */
 
+                                power = musb_readb(musb->mregs, MUSB_POWER);
                                 if (power & MUSB_POWER_SUSPENDM) {
                                         /* spurious */
                                         musb->int_usb &= ~MUSB_INTR_SUSPEND;
@@ -655,8 +627,8 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
         }
 
         if (int_usb & MUSB_INTR_SUSPEND) {
-                dev_dbg(musb->controller, "SUSPEND (%s) devctl %02x power %02x\n",
-                        otg_state_string(musb->xceiv->state), devctl, power);
+                dev_dbg(musb->controller, "SUSPEND (%s) devctl %02x\n",
+                        otg_state_string(musb->xceiv->state), devctl);
                 handled = IRQ_HANDLED;
 
                 switch (musb->xceiv->state) {
@@ -722,8 +694,10 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
                 if (is_peripheral_active(musb)) {
                         /* REVISIT HNP; just force disconnect */
                 }
-                musb_writew(musb->mregs, MUSB_INTRTXE, musb->epmask);
-                musb_writew(musb->mregs, MUSB_INTRRXE, musb->epmask & 0xfffe);
+                musb->intrtxe = musb->epmask;
+                musb_writew(musb->mregs, MUSB_INTRTXE, musb->intrtxe);
+                musb->intrrxe = musb->epmask & 0xfffe;
+                musb_writew(musb->mregs, MUSB_INTRRXE, musb->intrrxe);
                 musb_writeb(musb->mregs, MUSB_INTRUSBE, 0xf7);
                 musb->port1_status &= ~(USB_PORT_STAT_LOW_SPEED
                                         |USB_PORT_STAT_HIGH_SPEED
@@ -944,8 +918,10 @@ void musb_start(struct musb *musb)
         dev_dbg(musb->controller, "<== devctl %02x\n", devctl);
 
         /*  Set INT enable registers, enable interrupts */
-        musb_writew(regs, MUSB_INTRTXE, musb->epmask);
-        musb_writew(regs, MUSB_INTRRXE, musb->epmask & 0xfffe);
+        musb->intrtxe = musb->epmask;
+        musb_writew(regs, MUSB_INTRTXE, musb->intrtxe);
+        musb->intrrxe = musb->epmask & 0xfffe;
+        musb_writew(regs, MUSB_INTRRXE, musb->intrrxe);
         musb_writeb(regs, MUSB_INTRUSBE, 0xf7);
 
         musb_writeb(regs, MUSB_TESTMODE, 0);
@@ -983,7 +959,9 @@ static void musb_generic_disable(struct musb *musb)
 
         /* disable interrupts */
         musb_writeb(mbase, MUSB_INTRUSBE, 0);
+        musb->intrtxe = 0;
         musb_writew(mbase, MUSB_INTRTXE, 0);
+        musb->intrrxe = 0;
         musb_writew(mbase, MUSB_INTRRXE, 0);
 
         /* off */
@@ -1062,12 +1040,12 @@ static void musb_shutdown(struct platform_device *pdev)
         || defined(CONFIG_USB_MUSB_AM35X_MODULE)        \
         || defined(CONFIG_USB_MUSB_DSPS)                \
         || defined(CONFIG_USB_MUSB_DSPS_MODULE)
-static ushort __devinitdata fifo_mode = 4;
+static ushort fifo_mode = 4;
 #elif defined(CONFIG_USB_MUSB_UX500)                    \
         || defined(CONFIG_USB_MUSB_UX500_MODULE)
-static ushort __devinitdata fifo_mode = 5;
+static ushort fifo_mode = 5;
 #else
-static ushort __devinitdata fifo_mode = 2;
+static ushort fifo_mode = 2;
 #endif
 
 /* "modprobe ... fifo_mode=1" etc */
@@ -1080,7 +1058,7 @@ MODULE_PARM_DESC(fifo_mode, "initial endpoint configuration");
  */
 
 /* mode 0 - fits in 2KB */
-static struct musb_fifo_cfg __devinitdata mode_0_cfg[] = {
+static struct musb_fifo_cfg mode_0_cfg[] = {
 { .hw_ep_num = 1, .style = FIFO_TX,   .maxpacket = 512, },
 { .hw_ep_num = 1, .style = FIFO_RX,   .maxpacket = 512, },
 { .hw_ep_num = 2, .style = FIFO_RXTX, .maxpacket = 512, },
@@ -1089,7 +1067,7 @@ static struct musb_fifo_cfg __devinitdata mode_0_cfg[] = {
 };
 
 /* mode 1 - fits in 4KB */
-static struct musb_fifo_cfg __devinitdata mode_1_cfg[] = {
+static struct musb_fifo_cfg mode_1_cfg[] = {
 { .hw_ep_num = 1, .style = FIFO_TX,   .maxpacket = 512, .mode = BUF_DOUBLE, },
 { .hw_ep_num = 1, .style = FIFO_RX,   .maxpacket = 512, .mode = BUF_DOUBLE, },
 { .hw_ep_num = 2, .style = FIFO_RXTX, .maxpacket = 512, .mode = BUF_DOUBLE, },
@@ -1098,7 +1076,7 @@ static struct musb_fifo_cfg __devinitdata mode_1_cfg[] = {
 };
 
 /* mode 2 - fits in 4KB */
-static struct musb_fifo_cfg __devinitdata mode_2_cfg[] = {
+static struct musb_fifo_cfg mode_2_cfg[] = {
 { .hw_ep_num = 1, .style = FIFO_TX,   .maxpacket = 512, },
 { .hw_ep_num = 1, .style = FIFO_RX,   .maxpacket = 512, },
 { .hw_ep_num = 2, .style = FIFO_TX,   .maxpacket = 512, },
@@ -1108,7 +1086,7 @@ static struct musb_fifo_cfg __devinitdata mode_2_cfg[] = {
 };
 
 /* mode 3 - fits in 4KB */
-static struct musb_fifo_cfg __devinitdata mode_3_cfg[] = {
+static struct musb_fifo_cfg mode_3_cfg[] = {
 { .hw_ep_num = 1, .style = FIFO_TX,   .maxpacket = 512, .mode = BUF_DOUBLE, },
 { .hw_ep_num = 1, .style = FIFO_RX,   .maxpacket = 512, .mode = BUF_DOUBLE, },
 { .hw_ep_num = 2, .style = FIFO_TX,   .maxpacket = 512, },
@@ -1118,7 +1096,7 @@ static struct musb_fifo_cfg __devinitdata mode_3_cfg[] = {
 };
 
 /* mode 4 - fits in 16KB */
-static struct musb_fifo_cfg __devinitdata mode_4_cfg[] = {
+static struct musb_fifo_cfg mode_4_cfg[] = {
 { .hw_ep_num =  1, .style = FIFO_TX,   .maxpacket = 512, },
 { .hw_ep_num =  1, .style = FIFO_RX,   .maxpacket = 512, },
 { .hw_ep_num =  2, .style = FIFO_TX,   .maxpacket = 512, },
@@ -1149,7 +1127,7 @@ static struct musb_fifo_cfg __devinitdata mode_4_cfg[] = {
 };
 
 /* mode 5 - fits in 8KB */
-static struct musb_fifo_cfg __devinitdata mode_5_cfg[] = {
+static struct musb_fifo_cfg mode_5_cfg[] = {
 { .hw_ep_num =  1, .style = FIFO_TX,   .maxpacket = 512, },
 { .hw_ep_num =  1, .style = FIFO_RX,   .maxpacket = 512, },
 { .hw_ep_num =  2, .style = FIFO_TX,   .maxpacket = 512, },
@@ -1185,7 +1163,7 @@ static struct musb_fifo_cfg __devinitdata mode_5_cfg[] = {
  *
  * returns negative errno or offset for next fifo.
  */
-static int __devinit
+static int
 fifo_setup(struct musb *musb, struct musb_hw_ep  *hw_ep,
                 const struct musb_fifo_cfg *cfg, u16 offset)
 {
@@ -1256,11 +1234,11 @@ fifo_setup(struct musb *musb, struct musb_hw_ep  *hw_ep,
         return offset + (maxpacket << ((c_size & MUSB_FIFOSZ_DPB) ? 1 : 0));
 }
 
-static struct musb_fifo_cfg __devinitdata ep0_cfg = {
+static struct musb_fifo_cfg ep0_cfg = {
         .style = FIFO_RXTX, .maxpacket = 64,
 };
 
-static int __devinit ep_config_from_table(struct musb *musb)
+static int ep_config_from_table(struct musb *musb)
 {
         const struct musb_fifo_cfg      *cfg;
         unsigned                i, n;
@@ -1351,7 +1329,7 @@ done:
  * ep_config_from_hw - when MUSB_C_DYNFIFO_DEF is false
  * @param musb the controller
  */
-static int __devinit ep_config_from_hw(struct musb *musb)
+static int ep_config_from_hw(struct musb *musb)
 {
         u8 epnum = 0;
         struct musb_hw_ep *hw_ep;
@@ -1398,7 +1376,7 @@ enum { MUSB_CONTROLLER_MHDRC, MUSB_CONTROLLER_HDRC, };
 /* Initialize MUSB (M)HDRC part of the USB hardware subsystem;
  * configure endpoints, or take their config from silicon
  */
-static int __devinit musb_core_init(u16 musb_type, struct musb *musb)
+static int musb_core_init(u16 musb_type, struct musb *musb)
 {
         u8 reg;
         char *type;
@@ -1523,33 +1501,6 @@ static int __devinit musb_core_init(u16 musb_type, struct musb *musb)
 
 /*-------------------------------------------------------------------------*/
 
-#if defined(CONFIG_SOC_OMAP2430) || defined(CONFIG_SOC_OMAP3430) || \
-        defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_ARCH_U8500)
-
-static irqreturn_t generic_interrupt(int irq, void *__hci)
-{
-        unsigned long   flags;
-        irqreturn_t     retval = IRQ_NONE;
-        struct musb     *musb = __hci;
-
-        spin_lock_irqsave(&musb->lock, flags);
-
-        musb->int_usb = musb_readb(musb->mregs, MUSB_INTRUSB);
-        musb->int_tx = musb_readw(musb->mregs, MUSB_INTRTX);
-        musb->int_rx = musb_readw(musb->mregs, MUSB_INTRRX);
-
-        if (musb->int_usb || musb->int_tx || musb->int_rx)
-                retval = musb_interrupt(musb);
-
-        spin_unlock_irqrestore(&musb->lock, flags);
-
-        return retval;
-}
-
-#else
-#define generic_interrupt       NULL
-#endif
-
 /*
  * handle all the irqs defined by the HDRC core. for now we expect:  other
  * irq sources (phy, dma, etc) will be handled first, musb->int_* values
@@ -1560,12 +1511,11 @@ static irqreturn_t generic_interrupt(int irq, void *__hci)
 irqreturn_t musb_interrupt(struct musb *musb)
 {
         irqreturn_t     retval = IRQ_NONE;
-        u8              devctl, power;
+        u8              devctl;
         int             ep_num;
         u32             reg;
 
         devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
-        power = musb_readb(musb->mregs, MUSB_POWER);
 
         dev_dbg(musb->controller, "** IRQ %s usb%04x tx%04x rx%04x\n",
                 (devctl & MUSB_DEVCTL_HM) ? "host" : "peripheral",
@@ -1576,7 +1526,7 @@ irqreturn_t musb_interrupt(struct musb *musb)
          */
         if (musb->int_usb)
                 retval |= musb_stage0_irq(musb, musb->int_usb,
-                                devctl, power);
+                                devctl);
 
         /* "stage 1" is handling endpoint irqs */
 
@@ -1628,7 +1578,7 @@ irqreturn_t musb_interrupt(struct musb *musb)
 EXPORT_SYMBOL_GPL(musb_interrupt);
 
 #ifndef CONFIG_MUSB_PIO_ONLY
-static bool __devinitdata use_dma = 1;
+static bool use_dma = 1;
 
 /* "modprobe ... use_dma=0" etc */
 module_param(use_dma, bool, 0);
@@ -1809,8 +1759,7 @@ static void musb_irq_work(struct work_struct *data)
  * Init support
  */
 
-static struct musb *__devinit
-allocate_instance(struct device *dev,
+static struct musb *allocate_instance(struct device *dev,
                 struct musb_hdrc_config *config, void __iomem *mbase)
 {
         struct musb             *musb;
@@ -1885,7 +1834,7 @@ static void musb_free(struct musb *musb)
  * @ctrl: virtual address of controller registers,
  *      not yet corrected for platform-specific offsets
  */
-static int __devinit
+static int
 musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
 {
         int                     status;
@@ -1919,7 +1868,8 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
         musb->ops = plat->platform_ops;
 
         /* The musb_platform_init() call:
-         *   - adjusts musb->mregs and musb->isr if needed,
+         *   - adjusts musb->mregs
+         *   - sets the musb->isr
          *   - may initialize an integrated tranceiver
          *   - initializes musb->xceiv, usually by otg_get_phy()
          *   - stops powering VBUS
@@ -1929,7 +1879,6 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
          * external/discrete ones in various flavors (twl4030 family,
          * isp1504, non-OTG, etc) mostly hooking up through ULPI.
          */
-        musb->isr = generic_interrupt;
         status = musb_platform_init(musb);
         if (status < 0)
                 goto fail1;
@@ -2060,7 +2009,7 @@ fail0:
 /* all implementations (PCI bridge to FPGA, VLYNQ, etc) should just
  * bridge to a platform device; this driver then suffices.
  */
-static int __devinit musb_probe(struct platform_device *pdev)
+static int musb_probe(struct platform_device *pdev)
 {
         struct device   *dev = &pdev->dev;
         int             irq = platform_get_irq_byname(pdev, "mc");
@@ -2085,7 +2034,7 @@ static int __devinit musb_probe(struct platform_device *pdev)
         return status;
 }
 
-static int __devexit musb_remove(struct platform_device *pdev)
+static int musb_remove(struct platform_device *pdev)
 {
         struct device   *dev = &pdev->dev;
         struct musb     *musb = dev_to_musb(dev);
@@ -2120,8 +2069,6 @@ static void musb_save_context(struct musb *musb)
         musb->context.testmode = musb_readb(musb_base, MUSB_TESTMODE);
         musb->context.busctl = musb_read_ulpi_buscontrol(musb->mregs);
         musb->context.power = musb_readb(musb_base, MUSB_POWER);
-        musb->context.intrtxe = musb_readw(musb_base, MUSB_INTRTXE);
-        musb->context.intrrxe = musb_readw(musb_base, MUSB_INTRRXE);
         musb->context.intrusbe = musb_readb(musb_base, MUSB_INTRUSBE);
         musb->context.index = musb_readb(musb_base, MUSB_INDEX);
         musb->context.devctl = musb_readb(musb_base, MUSB_DEVCTL);
@@ -2194,8 +2141,8 @@ static void musb_restore_context(struct musb *musb)
         musb_writeb(musb_base, MUSB_TESTMODE, musb->context.testmode);
         musb_write_ulpi_buscontrol(musb->mregs, musb->context.busctl);
         musb_writeb(musb_base, MUSB_POWER, musb->context.power);
-        musb_writew(musb_base, MUSB_INTRTXE, musb->context.intrtxe);
-        musb_writew(musb_base, MUSB_INTRRXE, musb->context.intrrxe);
+        musb_writew(musb_base, MUSB_INTRTXE, musb->intrtxe);
+        musb_writew(musb_base, MUSB_INTRRXE, musb->intrrxe);
         musb_writeb(musb_base, MUSB_INTRUSBE, musb->context.intrusbe);
         musb_writeb(musb_base, MUSB_DEVCTL, musb->context.devctl);
 
@@ -2340,7 +2287,7 @@ static struct platform_driver musb_driver = {
                 .pm             = MUSB_DEV_PM_OPS,
         },
         .probe          = musb_probe,
-        .remove         = __devexit_p(musb_remove),
+        .remove         = musb_remove,
         .shutdown       = musb_shutdown,
 };
 
@@ -2351,10 +2298,7 @@ static int __init musb_init(void)
         if (usb_disabled())
                 return 0;
 
-        pr_info("%s: version " MUSB_VERSION ", "
-                "?dma?"
-                ", "
-                "otg (peripheral+host)",
+        pr_info("%s: version " MUSB_VERSION ", ?dma?, otg (peripheral+host)\n",
                 musb_driver_name);
         return platform_driver_register(&musb_driver);
 }
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index c158aacd6de8..7fb4819a6f11 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -288,7 +288,6 @@ struct musb_csr_regs {
 struct musb_context_registers {
 
         u8 power;
-        u16 intrtxe, intrrxe;
         u8 intrusbe;
         u16 frame;
         u8 index, testmode;
@@ -313,6 +312,8 @@ struct musb {
         struct work_struct      irq_work;
         u16                     hwvers;
 
+        u16                     intrrxe;
+        u16                     intrtxe;
 /* this hub status bit is reserved by USB 2.0 and not seen by usbcore */
 #define MUSB_PORT_STAT_RESUME   (1 << 31)
 
@@ -521,8 +522,6 @@ extern const char musb_driver_name[];
 
 extern void musb_start(struct musb *musb);
 extern void musb_stop(struct musb *musb);
-extern int musb_get_id(struct device *dev, gfp_t gfp_mask);
-extern void musb_put_id(struct device *dev, int id);
 
 extern void musb_write_fifo(struct musb_hw_ep *ep, u16 len, const u8 *src);
 extern void musb_read_fifo(struct musb_hw_ep *ep, u16 len, u8 *dst);
diff --git a/drivers/usb/musb/musb_debugfs.c b/drivers/usb/musb/musb_debugfs.c
index 1d6e8af94c06..4c216790e86b 100644
--- a/drivers/usb/musb/musb_debugfs.c
+++ b/drivers/usb/musb/musb_debugfs.c
@@ -233,7 +233,7 @@ static const struct file_operations musb_test_mode_fops = {
         .release                = single_release,
 };
 
-int __devinit musb_init_debugfs(struct musb *musb)
+int musb_init_debugfs(struct musb *musb)
 {
         struct dentry           *root;
         struct dentry           *file;
diff --git a/drivers/usb/musb/musb_dma.h b/drivers/usb/musb/musb_dma.h
index 24d39210d4ab..1b6b827b769f 100644
--- a/drivers/usb/musb/musb_dma.h
+++ b/drivers/usb/musb/musb_dma.h
@@ -178,8 +178,7 @@ struct dma_controller {
 extern void musb_dma_completion(struct musb *musb, u8 epnum, u8 transmit);
 
 
-extern struct dma_controller *__devinit
-dma_controller_create(struct musb *, void __iomem *);
+extern struct dma_controller *dma_controller_create(struct musb *, void __iomem *);
 
 extern void dma_controller_destroy(struct dma_controller *);
 
diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c
index ff5f112053d2..f7d764de6fda 100644
--- a/drivers/usb/musb/musb_dsps.c
+++ b/drivers/usb/musb/musb_dsps.c
@@ -38,13 +38,12 @@
 #include <linux/pm_runtime.h>
 #include <linux/module.h>
 #include <linux/usb/nop-usb-xceiv.h>
+#include <linux/platform_data/usb-omap.h>
 
 #include <linux/of.h>
 #include <linux/of_device.h>
 #include <linux/of_address.h>
 
-#include <plat/usb.h>
-
 #include "musb_core.h"
 
 #ifdef CONFIG_OF
@@ -124,8 +123,49 @@ struct dsps_glue {
         const struct dsps_musb_wrapper *wrp; /* wrapper register offsets */
         struct timer_list timer[2];     /* otg_workaround timer */
         unsigned long last_timer[2];    /* last timer data for each instance */
+        u32 __iomem *usb_ctrl[2];
+};
+
+#define DSPS_AM33XX_CONTROL_MODULE_PHYS_0       0x44e10620
+#define DSPS_AM33XX_CONTROL_MODULE_PHYS_1       0x44e10628
+
+static const resource_size_t dsps_control_module_phys[] = {
+        DSPS_AM33XX_CONTROL_MODULE_PHYS_0,
+        DSPS_AM33XX_CONTROL_MODULE_PHYS_1,
 };
 
+#define USBPHY_CM_PWRDN         (1 << 0)
+#define USBPHY_OTG_PWRDN        (1 << 1)
+#define USBPHY_OTGVDET_EN       (1 << 19)
+#define USBPHY_OTGSESSEND_EN    (1 << 20)
+
+/**
+ * musb_dsps_phy_control - phy on/off
+ * @glue: struct dsps_glue *
+ * @id: musb instance
+ * @on: flag for phy to be switched on or off
+ *
+ * This is to enable the PHY using usb_ctrl register in system control
+ * module space.
+ *
+ * XXX: This function will be removed once we have a seperate driver for
+ * control module
+ */
+static void musb_dsps_phy_control(struct dsps_glue *glue, u8 id, u8 on)
+{
+        u32 usbphycfg;
+
+        usbphycfg = readl(glue->usb_ctrl[id]);
+
+        if (on) {
+                usbphycfg &= ~(USBPHY_CM_PWRDN | USBPHY_OTG_PWRDN);
+                usbphycfg |= USBPHY_OTGVDET_EN | USBPHY_OTGSESSEND_EN;
+        } else {
+                usbphycfg |= USBPHY_CM_PWRDN | USBPHY_OTG_PWRDN;
+        }
+
+        writel(usbphycfg, glue->usb_ctrl[id]);
+}
 /**
  * dsps_musb_enable - enable interrupts
  */
@@ -296,7 +336,7 @@ static irqreturn_t dsps_interrupt(int irq, void *hci)
          * Also, DRVVBUS pulses for SRP (but not at 5V) ...
          */
         if (usbintr & MUSB_INTR_BABBLE)
-                pr_info("CAUTION: musb: Babble Interrupt Occured\n");
+                pr_info("CAUTION: musb: Babble Interrupt Occurred\n");
 
         if (usbintr & ((1 << wrp->drvvbus) << wrp->usb_shift)) {
                 int drvvbus = dsps_readl(reg_base, wrp->status);
@@ -365,11 +405,9 @@ static irqreturn_t dsps_interrupt(int irq, void *hci)
 static int dsps_musb_init(struct musb *musb)
 {
         struct device *dev = musb->controller;
-        struct musb_hdrc_platform_data *plat = dev->platform_data;
         struct platform_device *pdev = to_platform_device(dev);
         struct dsps_glue *glue = dev_get_drvdata(dev->parent);
         const struct dsps_musb_wrapper *wrp = glue->wrp;
-        struct omap_musb_board_data *data = plat->board_data;
         void __iomem *reg_base = musb->ctrl_base;
         u32 rev, val;
         int status;
@@ -377,7 +415,8 @@ static int dsps_musb_init(struct musb *musb)
         /* mentor core register starts at offset of 0x400 from musb base */
         musb->mregs += wrp->musb_core_offset;
 
-        /* Get the NOP PHY */
+        /* NOP driver needs change if supporting dual instance */
+        usb_nop_xceiv_register();
         musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2);
         if (IS_ERR_OR_NULL(musb->xceiv))
                 return -ENODEV;
@@ -395,8 +434,7 @@ static int dsps_musb_init(struct musb *musb)
         dsps_writel(reg_base, wrp->control, (1 << wrp->reset));
 
         /* Start the on-chip PHY and its PLL. */
-        if (data->set_phy_power)
-                data->set_phy_power(1);
+        musb_dsps_phy_control(glue, pdev->id, 1);
 
         musb->isr = dsps_interrupt;
 
@@ -418,16 +456,13 @@ err0:
 static int dsps_musb_exit(struct musb *musb)
 {
         struct device *dev = musb->controller;
-        struct musb_hdrc_platform_data *plat = dev->platform_data;
-        struct omap_musb_board_data *data = plat->board_data;
         struct platform_device *pdev = to_platform_device(dev);
         struct dsps_glue *glue = dev_get_drvdata(dev->parent);
 
         del_timer_sync(&glue->timer[pdev->id]);
 
         /* Shutdown the on-chip PHY and its PLL. */
-        if (data->set_phy_power)
-                data->set_phy_power(0);
+        musb_dsps_phy_control(glue, pdev->id, 0);
 
         /* NOP driver needs change if supporting dual instance */
         usb_put_phy(musb->xceiv);
@@ -448,7 +483,7 @@ static struct musb_platform_ops dsps_ops = {
 
 static u64 musb_dmamask = DMA_BIT_MASK(32);
 
-static int __devinit dsps_create_musb_pdev(struct dsps_glue *glue, u8 id)
+static int dsps_create_musb_pdev(struct dsps_glue *glue, u8 id)
 {
         struct device *dev = glue->dev;
         struct platform_device *pdev = to_platform_device(dev);
@@ -459,24 +494,33 @@ static int __devinit dsps_create_musb_pdev(struct dsps_glue *glue, u8 id)
         struct resource *res;
         struct resource resources[2];
         char res_name[11];
-        int ret, musbid;
+        int ret;
 
-        /* get memory resource */
-        snprintf(res_name, sizeof(res_name), "musb%d", id);
-        res = platform_get_resource_byname(pdev, IORESOURCE_MEM, res_name);
+        resources[0].start = dsps_control_module_phys[id];
+        resources[0].end = resources[0].start + SZ_4 - 1;
+        resources[0].flags = IORESOURCE_MEM;
+
+        glue->usb_ctrl[id] = devm_request_and_ioremap(&pdev->dev, resources);
+        if (glue->usb_ctrl[id] == NULL) {
+                dev_err(dev, "Failed to obtain usb_ctrl%d memory\n", id);
+                ret = -ENODEV;
+                goto err0;
+        }
+
+        /* first resource is for usbss, so start index from 1 */
+        res = platform_get_resource(pdev, IORESOURCE_MEM, id + 1);
         if (!res) {
-                dev_err(dev, "%s get mem resource failed\n", res_name);
+                dev_err(dev, "failed to get memory for instance %d\n", id);
                 ret = -ENODEV;
                 goto err0;
         }
         res->parent = NULL;
         resources[0] = *res;
 
-        /* get irq resource */
-        snprintf(res_name, sizeof(res_name), "musb%d-irq", id);
-        res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, res_name);
+        /* first resource is for usbss, so start index from 1 */
+        res = platform_get_resource(pdev, IORESOURCE_IRQ, id + 1);
         if (!res) {
-                dev_err(dev, "%s get irq resource failed\n", res_name);
+                dev_err(dev, "failed to get irq for instance %d\n", id);
                 ret = -ENODEV;
                 goto err0;
         }
@@ -484,22 +528,14 @@ static int __devinit dsps_create_musb_pdev(struct dsps_glue *glue, u8 id)
         resources[1] = *res;
         resources[1].name = "mc";
 
-        /* get the musb id */
-        musbid = musb_get_id(dev, GFP_KERNEL);
-        if (musbid < 0) {
-                dev_err(dev, "failed to allocate musb id\n");
-                ret = -ENOMEM;
-                goto err0;
-        }
         /* allocate the child platform device */
-        musb = platform_device_alloc("musb-hdrc", musbid);
+        musb = platform_device_alloc("musb-hdrc", PLATFORM_DEVID_AUTO);
         if (!musb) {
                 dev_err(dev, "failed to allocate musb device\n");
                 ret = -ENOMEM;
-                goto err1;
+                goto err0;
         }
 
-        musb->id                        = musbid;
         musb->dev.parent                = dev;
         musb->dev.dma_mask              = &musb_dmamask;
         musb->dev.coherent_dma_mask     = musb_dmamask;
@@ -556,20 +592,11 @@ static int __devinit dsps_create_musb_pdev(struct dsps_glue *glue, u8 id)
 
 err2:
         platform_device_put(musb);
-err1:
-        musb_put_id(dev, musbid);
 err0:
         return ret;
 }
 
-static void dsps_delete_musb_pdev(struct dsps_glue *glue, u8 id)
-{
-        musb_put_id(glue->dev, glue->musb[id]->id);
-        platform_device_del(glue->musb[id]);
-        platform_device_put(glue->musb[id]);
-}
-
-static int __devinit dsps_probe(struct platform_device *pdev)
+static int dsps_probe(struct platform_device *pdev)
 {
         struct device_node *np = pdev->dev.of_node;
         const struct of_device_id *match;
@@ -628,7 +655,7 @@ static int __devinit dsps_probe(struct platform_device *pdev)
                         dev_err(&pdev->dev, "failed to create child pdev\n");
                         /* release resources of previously created instances */
                         for (i--; i >= 0 ; i--)
-                                dsps_delete_musb_pdev(glue, i);
+                                platform_device_unregister(glue->musb[i]);
                         goto err3;
                 }
         }
@@ -645,7 +672,7 @@ err1:
 err0:
         return ret;
 }
-static int __devexit dsps_remove(struct platform_device *pdev)
+static int dsps_remove(struct platform_device *pdev)
 {
         struct dsps_glue *glue = platform_get_drvdata(pdev);
         const struct dsps_musb_wrapper *wrp = glue->wrp;
@@ -653,7 +680,7 @@ static int __devexit dsps_remove(struct platform_device *pdev)
 
         /* delete the child platform device */
         for (i = 0; i < wrp->instances ; i++)
-                dsps_delete_musb_pdev(glue, i);
+                platform_device_unregister(glue->musb[i]);
 
         /* disable usbss clocks */
         pm_runtime_put(&pdev->dev);
@@ -666,24 +693,26 @@ static int __devexit dsps_remove(struct platform_device *pdev)
 #ifdef CONFIG_PM_SLEEP
 static int dsps_suspend(struct device *dev)
 {
-        struct musb_hdrc_platform_data *plat = dev->platform_data;
-        struct omap_musb_board_data *data = plat->board_data;
+        struct platform_device *pdev = to_platform_device(dev->parent);
+        struct dsps_glue *glue = platform_get_drvdata(pdev);
+        const struct dsps_musb_wrapper *wrp = glue->wrp;
+        int i;
 
-        /* Shutdown the on-chip PHY and its PLL. */
-        if (data->set_phy_power)
-                data->set_phy_power(0);
+        for (i = 0; i < wrp->instances; i++)
+                musb_dsps_phy_control(glue, i, 0);
 
         return 0;
 }
 
 static int dsps_resume(struct device *dev)
 {
-        struct musb_hdrc_platform_data *plat = dev->platform_data;
-        struct omap_musb_board_data *data = plat->board_data;
+        struct platform_device *pdev = to_platform_device(dev->parent);
+        struct dsps_glue *glue = platform_get_drvdata(pdev);
+        const struct dsps_musb_wrapper *wrp = glue->wrp;
+        int i;
 
-        /* Start the on-chip PHY and its PLL. */
-        if (data->set_phy_power)
-                data->set_phy_power(1);
+        for (i = 0; i < wrp->instances; i++)
+                musb_dsps_phy_control(glue, i, 1);
 
         return 0;
 }
@@ -691,7 +720,7 @@ static int dsps_resume(struct device *dev)
 
 static SIMPLE_DEV_PM_OPS(dsps_pm_ops, dsps_suspend, dsps_resume);
 
-static const struct dsps_musb_wrapper ti81xx_driver_data __devinitconst = {
+static const struct dsps_musb_wrapper ti81xx_driver_data = {
         .revision               = 0x00,
         .control                = 0x14,
         .status                 = 0x18,
@@ -719,10 +748,10 @@ static const struct dsps_musb_wrapper ti81xx_driver_data __devinitconst = {
         .rxep_bitmap            = (0xfffe << 16),
         .musb_core_offset       = 0x400,
         .poll_seconds           = 2,
-        .instances              = 2,
+        .instances              = 1,
 };
 
-static const struct platform_device_id musb_dsps_id_table[] __devinitconst = {
+static const struct platform_device_id musb_dsps_id_table[] = {
         {
                 .name   = "musb-ti81xx",
                 .driver_data    = (kernel_ulong_t) &ti81xx_driver_data,
@@ -732,7 +761,7 @@ static const struct platform_device_id musb_dsps_id_table[] __devinitconst = {
 MODULE_DEVICE_TABLE(platform, musb_dsps_id_table);
 
 #ifdef CONFIG_OF
-static const struct of_device_id musb_dsps_of_match[] __devinitconst = {
+static const struct of_device_id musb_dsps_of_match[] = {
         { .compatible = "ti,musb-am33xx",
                 .data = (void *) &ti81xx_driver_data, },
         {  },
@@ -742,7 +771,7 @@ MODULE_DEVICE_TABLE(of, musb_dsps_of_match);
 
 static struct platform_driver dsps_usbss_driver = {
         .probe          = dsps_probe,
-        .remove         = __devexit_p(dsps_remove),
+        .remove         = dsps_remove,
         .driver         = {
                 .name   = "musb-dsps",
                 .pm     = &dsps_pm_ops,
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index b6b84dacc791..876787438c2f 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -1090,7 +1090,6 @@ static int musb_gadget_enable(struct usb_ep *ep,
          */
         musb_ep_select(mbase, epnum);
         if (usb_endpoint_dir_in(desc)) {
-                u16 int_txe = musb_readw(mbase, MUSB_INTRTXE);
 
                 if (hw_ep->is_shared_fifo)
                         musb_ep->is_in = 1;
@@ -1102,8 +1101,8 @@ static int musb_gadget_enable(struct usb_ep *ep,
                         goto fail;
                 }
 
-                int_txe |= (1 << epnum);
-                musb_writew(mbase, MUSB_INTRTXE, int_txe);
+                musb->intrtxe |= (1 << epnum);
+                musb_writew(mbase, MUSB_INTRTXE, musb->intrtxe);
 
                 /* REVISIT if can_bulk_split(), use by updating "tmp";
                  * likewise high bandwidth periodic tx
@@ -1130,7 +1129,6 @@ static int musb_gadget_enable(struct usb_ep *ep,
                 musb_writew(regs, MUSB_TXCSR, csr);
 
         } else {
-                u16 int_rxe = musb_readw(mbase, MUSB_INTRRXE);
 
                 if (hw_ep->is_shared_fifo)
                         musb_ep->is_in = 0;
@@ -1142,8 +1140,8 @@ static int musb_gadget_enable(struct usb_ep *ep,
                         goto fail;
                 }
 
-                int_rxe |= (1 << epnum);
-                musb_writew(mbase, MUSB_INTRRXE, int_rxe);
+                musb->intrrxe |= (1 << epnum);
+                musb_writew(mbase, MUSB_INTRRXE, musb->intrrxe);
 
                 /* REVISIT if can_bulk_combine() use by updating "tmp"
                  * likewise high bandwidth periodic rx
@@ -1231,14 +1229,12 @@ static int musb_gadget_disable(struct usb_ep *ep)
 
         /* zero the endpoint sizes */
         if (musb_ep->is_in) {
-                u16 int_txe = musb_readw(musb->mregs, MUSB_INTRTXE);
-                int_txe &= ~(1 << epnum);
-                musb_writew(musb->mregs, MUSB_INTRTXE, int_txe);
+                musb->intrtxe &= ~(1 << epnum);
+                musb_writew(musb->mregs, MUSB_INTRTXE, musb->intrtxe);
                 musb_writew(epio, MUSB_TXMAXP, 0);
         } else {
-                u16 int_rxe = musb_readw(musb->mregs, MUSB_INTRRXE);
-                int_rxe &= ~(1 << epnum);
-                musb_writew(musb->mregs, MUSB_INTRRXE, int_rxe);
+                musb->intrrxe &= ~(1 << epnum);
+                musb_writew(musb->mregs, MUSB_INTRRXE, musb->intrrxe);
                 musb_writew(epio, MUSB_RXMAXP, 0);
         }
 
@@ -1554,7 +1550,7 @@ static void musb_gadget_fifo_flush(struct usb_ep *ep)
         void __iomem    *epio = musb->endpoints[epnum].regs;
         void __iomem    *mbase;
         unsigned long   flags;
-        u16             csr, int_txe;
+        u16             csr;
 
         mbase = musb->mregs;
 
@@ -1562,8 +1558,7 @@ static void musb_gadget_fifo_flush(struct usb_ep *ep)
         musb_ep_select(mbase, (u8) epnum);
 
         /* disable interrupts */
-        int_txe = musb_readw(mbase, MUSB_INTRTXE);
-        musb_writew(mbase, MUSB_INTRTXE, int_txe & ~(1 << epnum));
+        musb_writew(mbase, MUSB_INTRTXE, musb->intrtxe & ~(1 << epnum));
 
         if (musb_ep->is_in) {
                 csr = musb_readw(epio, MUSB_TXCSR);
@@ -1587,7 +1582,7 @@ static void musb_gadget_fifo_flush(struct usb_ep *ep)
         }
 
         /* re-enable interrupt */
-        musb_writew(mbase, MUSB_INTRTXE, int_txe);
+        musb_writew(mbase, MUSB_INTRTXE, musb->intrtxe);
         spin_unlock_irqrestore(&musb->lock, flags);
 }
 
@@ -1792,7 +1787,7 @@ static void musb_gadget_release(struct device *dev)
 }
 
 
-static void __devinit
+static void
 init_peripheral_ep(struct musb *musb, struct musb_ep *ep, u8 epnum, int is_in)
 {
         struct musb_hw_ep       *hw_ep = musb->endpoints + epnum;
@@ -1829,7 +1824,7 @@ init_peripheral_ep(struct musb *musb, struct musb_ep *ep, u8 epnum, int is_in)
  * Initialize the endpoints exposed to peripheral drivers, with backlinks
  * to the rest of the driver state.
  */
-static inline void __devinit musb_g_init_endpoints(struct musb *musb)
+static inline void musb_g_init_endpoints(struct musb *musb)
 {
         u8                      epnum;
         struct musb_hw_ep       *hw_ep;
@@ -1862,7 +1857,7 @@ static inline void __devinit musb_g_init_endpoints(struct musb *musb)
 /* called once during driver setup to initialize and link into
  * the driver model; memory is zeroed.
  */
-int __devinit musb_gadget_setup(struct musb *musb)
+int musb_gadget_setup(struct musb *musb)
 {
         int status;
 
@@ -2176,10 +2171,9 @@ __acquires(musb->lock)
         u8              devctl = musb_readb(mbase, MUSB_DEVCTL);
         u8              power;
 
-        dev_dbg(musb->controller, "<== %s addr=%x driver '%s'\n",
+        dev_dbg(musb->controller, "<== %s driver '%s'\n",
                         (devctl & MUSB_DEVCTL_BDEVICE)
                                 ? "B-Device" : "A-Device",
-                        musb_readb(mbase, MUSB_FADDR),
                         musb->gadget_driver
                                 ? musb->gadget_driver->driver.name
                                 : NULL
diff --git a/drivers/usb/musb/musb_gadget_ep0.c b/drivers/usb/musb/musb_gadget_ep0.c
index e40d7647caf1..c9c1ac4e075f 100644
--- a/drivers/usb/musb/musb_gadget_ep0.c
+++ b/drivers/usb/musb/musb_gadget_ep0.c
@@ -673,10 +673,8 @@ irqreturn_t musb_g_ep0_irq(struct musb *musb)
         csr = musb_readw(regs, MUSB_CSR0);
         len = musb_readb(regs, MUSB_COUNT0);
 
-        dev_dbg(musb->controller, "csr %04x, count %d, myaddr %d, ep0stage %s\n",
-                        csr, len,
-                        musb_readb(mbase, MUSB_FADDR),
-                        decode_ep0stage(musb->ep0_state));
+        dev_dbg(musb->controller, "csr %04x, count %d, ep0stage %s\n",
+                        csr, len, decode_ep0stage(musb->ep0_state));
 
         if (csr & MUSB_CSR0_P_DATAEND) {
                 /*
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index 3df6a76b851d..e9f0fd9ddd2d 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -740,7 +740,7 @@ static void musb_ep_program(struct musb *musb, u8 epnum,
                 csr = musb_readw(epio, MUSB_TXCSR);
 
                 /* disable interrupt in case we flush */
-                int_txe = musb_readw(mbase, MUSB_INTRTXE);
+                int_txe = musb->intrtxe;
                 musb_writew(mbase, MUSB_INTRTXE, int_txe & ~(1 << epnum));
 
                 /* general endpoint setup */
diff --git a/drivers/usb/musb/musb_io.h b/drivers/usb/musb/musb_io.h
index 565ad1617832..eebeed78edd6 100644
--- a/drivers/usb/musb/musb_io.h
+++ b/drivers/usb/musb/musb_io.h
@@ -37,27 +37,6 @@
 
 #include <linux/io.h>
 
-#if !defined(CONFIG_ARM) && !defined(CONFIG_SUPERH) \
-        && !defined(CONFIG_AVR32) && !defined(CONFIG_PPC32) \
-        && !defined(CONFIG_PPC64) && !defined(CONFIG_BLACKFIN) \
-        && !defined(CONFIG_MIPS) && !defined(CONFIG_M68K) \
-        && !defined(CONFIG_XTENSA)
-static inline void readsl(const void __iomem *addr, void *buf, int len)
-        { insl((unsigned long)addr, buf, len); }
-static inline void readsw(const void __iomem *addr, void *buf, int len)
-        { insw((unsigned long)addr, buf, len); }
-static inline void readsb(const void __iomem *addr, void *buf, int len)
-        { insb((unsigned long)addr, buf, len); }
-
-static inline void writesl(const void __iomem *addr, const void *buf, int len)
-        { outsl((unsigned long)addr, buf, len); }
-static inline void writesw(const void __iomem *addr, const void *buf, int len)
-        { outsw((unsigned long)addr, buf, len); }
-static inline void writesb(const void __iomem *addr, const void *buf, int len)
-        { outsb((unsigned long)addr, buf, len); }
-
-#endif
-
 #ifndef CONFIG_BLACKFIN
 
 /* NOTE:  these offsets are all in bytes */
diff --git a/drivers/usb/musb/musbhsdma.c b/drivers/usb/musb/musbhsdma.c
index 0fc6ca6bc60a..3d1fd52a15a9 100644
--- a/drivers/usb/musb/musbhsdma.c
+++ b/drivers/usb/musb/musbhsdma.c
@@ -380,8 +380,7 @@ void dma_controller_destroy(struct dma_controller *c)
         kfree(controller);
 }
 
-struct dma_controller *__devinit
-dma_controller_create(struct musb *musb, void __iomem *base)
+struct dma_controller *dma_controller_create(struct musb *musb, void __iomem *base)
 {
         struct musb_dma_controller *controller;
         struct device *dev = musb->controller;
diff --git a/drivers/usb/musb/musbhsdma.h b/drivers/usb/musb/musbhsdma.h
index 320fd4afb93f..f7b13fd25257 100644
--- a/drivers/usb/musb/musbhsdma.h
+++ b/drivers/usb/musb/musbhsdma.h
@@ -31,10 +31,6 @@
  *
  */
 
-#if defined(CONFIG_SOC_OMAP2430) || defined(CONFIG_SOC_OMAP3430)
-#include "omap2430.h"
-#endif
-
 #ifndef CONFIG_BLACKFIN
 
 #define MUSB_HSDMA_BASE         0x200
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index a538fe17a966..da00af460794 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -333,6 +333,26 @@ static void omap_musb_mailbox_work(struct work_struct *mailbox_work)
         omap_musb_set_mailbox(glue);
 }
 
+static irqreturn_t omap2430_musb_interrupt(int irq, void *__hci)
+{
+        unsigned long   flags;
+        irqreturn_t     retval = IRQ_NONE;
+        struct musb     *musb = __hci;
+
+        spin_lock_irqsave(&musb->lock, flags);
+
+        musb->int_usb = musb_readb(musb->mregs, MUSB_INTRUSB);
+        musb->int_tx = musb_readw(musb->mregs, MUSB_INTRTX);
+        musb->int_rx = musb_readw(musb->mregs, MUSB_INTRRX);
+
+        if (musb->int_usb || musb->int_tx || musb->int_rx)
+                retval = musb_interrupt(musb);
+
+        spin_unlock_irqrestore(&musb->lock, flags);
+
+        return retval;
+}
+
 static int omap2430_musb_init(struct musb *musb)
 {
         u32 l;
@@ -352,6 +372,8 @@ static int omap2430_musb_init(struct musb *musb)
                 return -ENODEV;
         }
 
+        musb->isr = omap2430_musb_interrupt;
+
         status = pm_runtime_get_sync(dev);
         if (status < 0) {
                 dev_err(dev, "pm_runtime_get_sync FAILED %d\n", status);
@@ -468,7 +490,7 @@ static const struct musb_platform_ops omap2430_ops = {
 
 static u64 omap2430_dmamask = DMA_BIT_MASK(32);
 
-static int __devinit omap2430_probe(struct platform_device *pdev)
+static int omap2430_probe(struct platform_device *pdev)
 {
         struct musb_hdrc_platform_data  *pdata = pdev->dev.platform_data;
         struct omap_musb_board_data     *data;
@@ -478,7 +500,6 @@ static int __devinit omap2430_probe(struct platform_device *pdev)
         struct musb_hdrc_config         *config;
         struct resource                 *res;
         int                             ret = -ENOMEM;
-        int                             musbid;
 
         glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL);
         if (!glue) {
@@ -486,21 +507,12 @@ static int __devinit omap2430_probe(struct platform_device *pdev)
                 goto err0;
         }
 
-        /* get the musb id */
-        musbid = musb_get_id(&pdev->dev, GFP_KERNEL);
-        if (musbid < 0) {
-                dev_err(&pdev->dev, "failed to allocate musb id\n");
-                ret = -ENOMEM;
-                goto err0;
-        }
-
-        musb = platform_device_alloc("musb-hdrc", musbid);
+        musb = platform_device_alloc("musb-hdrc", PLATFORM_DEVID_AUTO);
         if (!musb) {
                 dev_err(&pdev->dev, "failed to allocate musb device\n");
-                goto err1;
+                goto err0;
         }
 
-        musb->id                        = musbid;
         musb->dev.parent                = &pdev->dev;
         musb->dev.dma_mask              = &omap2430_dmamask;
         musb->dev.coherent_dma_mask     = omap2430_dmamask;
@@ -521,7 +533,7 @@ static int __devinit omap2430_probe(struct platform_device *pdev)
                         dev_err(&pdev->dev,
                                 "failed to allocate musb platfrom data\n");
                         ret = -ENOMEM;
-                        goto err1;
+                        goto err2;
                 }
 
                 data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
@@ -529,14 +541,14 @@ static int __devinit omap2430_probe(struct platform_device *pdev)
                         dev_err(&pdev->dev,
                                         "failed to allocate musb board data\n");
                         ret = -ENOMEM;
-                        goto err1;
+                        goto err2;
                 }
 
                 config = devm_kzalloc(&pdev->dev, sizeof(*config), GFP_KERNEL);
                 if (!data) {
                         dev_err(&pdev->dev,
                                 "failed to allocate musb hdrc config\n");
-                        goto err1;
+                        goto err2;
                 }
 
                 of_property_read_u32(np, "mode", (u32 *)&pdata->mode);
@@ -589,19 +601,15 @@ static int __devinit omap2430_probe(struct platform_device *pdev)
 err2:
         platform_device_put(musb);
 
-err1:
-        musb_put_id(&pdev->dev, musbid);
-
 err0:
         return ret;
 }
 
-static int __devexit omap2430_remove(struct platform_device *pdev)
+static int omap2430_remove(struct platform_device *pdev)
 {
         struct omap2430_glue            *glue = platform_get_drvdata(pdev);
 
         cancel_work_sync(&glue->omap_musb_mailbox_work);
-        musb_put_id(&pdev->dev, glue->musb->id);
         platform_device_unregister(glue->musb);
 
         return 0;
@@ -666,7 +674,7 @@ MODULE_DEVICE_TABLE(of, omap2430_id_table);
 
 static struct platform_driver omap2430_driver = {
         .probe          = omap2430_probe,
-        .remove         = __devexit_p(omap2430_remove),
+        .remove         = omap2430_remove,
         .driver         = {
                 .name   = "musb-omap2430",
                 .pm     = DEV_PM_OPS,
diff --git a/drivers/usb/musb/omap2430.h b/drivers/usb/musb/omap2430.h
index b85f3973e78c..8ef656659fcb 100644
--- a/drivers/usb/musb/omap2430.h
+++ b/drivers/usb/musb/omap2430.h
@@ -10,7 +10,7 @@
 #ifndef __MUSB_OMAP243X_H__
 #define __MUSB_OMAP243X_H__
 
-#include <plat/usb.h>
+#include <linux/platform_data/usb-omap.h>
 
 /*
  * OMAP2430-specific definitions
diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c
index dc4d75ea13ad..3969813c217d 100644
--- a/drivers/usb/musb/tusb6010.c
+++ b/drivers/usb/musb/tusb6010.c
@@ -22,6 +22,7 @@
 #include <linux/prefetch.h>
 #include <linux/usb.h>
 #include <linux/irq.h>
+#include <linux/io.h>
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 #include <linux/usb/nop-usb-xceiv.h>
@@ -198,7 +199,7 @@ void musb_write_fifo(struct musb_hw_ep *hw_ep, u16 len, const u8 *buf)
                 /* Best case is 32bit-aligned destination address */
                 if ((0x02 & (unsigned long) buf) == 0) {
                         if (len >= 4) {
-                                writesl(fifo, buf, len >> 2);
+                                iowrite32_rep(fifo, buf, len >> 2);
                                 buf += (len & ~0x03);
                                 len &= 0x03;
                         }
@@ -245,7 +246,7 @@ void musb_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *buf)
                 /* Best case is 32bit-aligned destination address */
                 if ((0x02 & (unsigned long) buf) == 0) {
                         if (len >= 4) {
-                                readsl(fifo, buf, len >> 2);
+                                ioread32_rep(fifo, buf, len >> 2);
                                 buf += (len & ~0x03);
                                 len &= 0x03;
                         }
@@ -1153,14 +1154,13 @@ static const struct musb_platform_ops tusb_ops = {
 
 static u64 tusb_dmamask = DMA_BIT_MASK(32);
 
-static int __devinit tusb_probe(struct platform_device *pdev)
+static int tusb_probe(struct platform_device *pdev)
 {
         struct musb_hdrc_platform_data  *pdata = pdev->dev.platform_data;
         struct platform_device          *musb;
         struct tusb6010_glue            *glue;
 
         int                             ret = -ENOMEM;
-        int                             musbid;
 
         glue = kzalloc(sizeof(*glue), GFP_KERNEL);
         if (!glue) {
@@ -1168,21 +1168,12 @@ static int __devinit tusb_probe(struct platform_device *pdev)
                 goto err0;
         }
 
-        /* get the musb id */
-        musbid = musb_get_id(&pdev->dev, GFP_KERNEL);
-        if (musbid < 0) {
-                dev_err(&pdev->dev, "failed to allocate musb id\n");
-                ret = -ENOMEM;
-                goto err1;
-        }
-
-        musb = platform_device_alloc("musb-hdrc", musbid);
+        musb = platform_device_alloc("musb-hdrc", PLATFORM_DEVID_AUTO);
         if (!musb) {
                 dev_err(&pdev->dev, "failed to allocate musb device\n");
-                goto err2;
+                goto err1;
         }
 
-        musb->id                        = musbid;
         musb->dev.parent                = &pdev->dev;
         musb->dev.dma_mask              = &tusb_dmamask;
         musb->dev.coherent_dma_mask     = tusb_dmamask;
@@ -1218,9 +1209,6 @@ static int __devinit tusb_probe(struct platform_device *pdev)
 err3:
         platform_device_put(musb);
 
-err2:
-        musb_put_id(&pdev->dev, musbid);
-
 err1:
         kfree(glue);
 
@@ -1228,13 +1216,11 @@ err0:
         return ret;
 }
 
-static int __devexit tusb_remove(struct platform_device *pdev)
+static int tusb_remove(struct platform_device *pdev)
 {
         struct tusb6010_glue            *glue = platform_get_drvdata(pdev);
 
-        musb_put_id(&pdev->dev, glue->musb->id);
-        platform_device_del(glue->musb);
-        platform_device_put(glue->musb);
+        platform_device_unregister(glue->musb);
         kfree(glue);
 
         return 0;
@@ -1242,7 +1228,7 @@ static int __devexit tusb_remove(struct platform_device *pdev)
 
 static struct platform_driver tusb_driver = {
         .probe          = tusb_probe,
-        .remove         = __devexit_p(tusb_remove),
+        .remove         = tusb_remove,
         .driver         = {
                 .name   = "musb-tusb",
         },
@@ -1251,15 +1237,4 @@ static struct platform_driver tusb_driver = {
 MODULE_DESCRIPTION("TUSB6010 MUSB Glue Layer");
 MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>");
 MODULE_LICENSE("GPL v2");
-
-static int __init tusb_init(void)
-{
-        return platform_driver_register(&tusb_driver);
-}
-module_init(tusb_init);
-
-static void __exit tusb_exit(void)
-{
-        platform_driver_unregister(&tusb_driver);
-}
-module_exit(tusb_exit);
+module_platform_driver(tusb_driver);
diff --git a/drivers/usb/musb/tusb6010_omap.c b/drivers/usb/musb/tusb6010_omap.c
index 7a62b95dac24..98df17c984a8 100644
--- a/drivers/usb/musb/tusb6010_omap.c
+++ b/drivers/usb/musb/tusb6010_omap.c
@@ -16,7 +16,7 @@
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 #include <linux/slab.h>
-#include <plat/dma.h>
+#include <linux/omap-dma.h>
 
 #include "musb_core.h"
 #include "tusb6010.h"
@@ -25,6 +25,13 @@
 
 #define MAX_DMAREQ              5       /* REVISIT: Really 6, but req5 not OK */
 
+#define OMAP24XX_DMA_EXT_DMAREQ0        2
+#define OMAP24XX_DMA_EXT_DMAREQ1        3
+#define OMAP242X_DMA_EXT_DMAREQ2        14
+#define OMAP242X_DMA_EXT_DMAREQ3        15
+#define OMAP242X_DMA_EXT_DMAREQ4        16
+#define OMAP242X_DMA_EXT_DMAREQ5        64
+
 struct tusb_omap_dma_ch {
         struct musb             *musb;
         void __iomem            *tbase;
@@ -661,8 +668,7 @@ void dma_controller_destroy(struct dma_controller *c)
         kfree(tusb_dma);
 }
 
-struct dma_controller *__devinit
-dma_controller_create(struct musb *musb, void __iomem *base)
+struct dma_controller *dma_controller_create(struct musb *musb, void __iomem *base)
 {
         void __iomem            *tbase = musb->ctrl_base;
         struct tusb_omap_dma    *tusb_dma;
diff --git a/drivers/usb/musb/ux500.c b/drivers/usb/musb/ux500.c
index 0e62f504410e..a27ca1a9c994 100644
--- a/drivers/usb/musb/ux500.c
+++ b/drivers/usb/musb/ux500.c
@@ -36,6 +36,26 @@ struct ux500_glue {
 };
 #define glue_to_musb(g) platform_get_drvdata(g->musb)
 
+static irqreturn_t ux500_musb_interrupt(int irq, void *__hci)
+{
+        unsigned long   flags;
+        irqreturn_t     retval = IRQ_NONE;
+        struct musb     *musb = __hci;
+
+        spin_lock_irqsave(&musb->lock, flags);
+
+        musb->int_usb = musb_readb(musb->mregs, MUSB_INTRUSB);
+        musb->int_tx = musb_readw(musb->mregs, MUSB_INTRTX);
+        musb->int_rx = musb_readw(musb->mregs, MUSB_INTRRX);
+
+        if (musb->int_usb || musb->int_tx || musb->int_rx)
+                retval = musb_interrupt(musb);
+
+        spin_unlock_irqrestore(&musb->lock, flags);
+
+        return retval;
+}
+
 static int ux500_musb_init(struct musb *musb)
 {
         musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2);
@@ -44,6 +64,8 @@ static int ux500_musb_init(struct musb *musb)
                 return -ENODEV;
         }
 
+        musb->isr = ux500_musb_interrupt;
+
         return 0;
 }
 
@@ -59,13 +81,12 @@ static const struct musb_platform_ops ux500_ops = {
         .exit           = ux500_musb_exit,
 };
 
-static int __devinit ux500_probe(struct platform_device *pdev)
+static int ux500_probe(struct platform_device *pdev)
 {
         struct musb_hdrc_platform_data  *pdata = pdev->dev.platform_data;
         struct platform_device          *musb;
         struct ux500_glue               *glue;
         struct clk                      *clk;
-        int                             musbid;
         int                             ret = -ENOMEM;
 
         glue = kzalloc(sizeof(*glue), GFP_KERNEL);
@@ -74,18 +95,10 @@ static int __devinit ux500_probe(struct platform_device *pdev)
                 goto err0;
         }
 
-        /* get the musb id */
-        musbid = musb_get_id(&pdev->dev, GFP_KERNEL);
-        if (musbid < 0) {
-                dev_err(&pdev->dev, "failed to allocate musb id\n");
-                ret = -ENOMEM;
-                goto err1;
-        }
-
-        musb = platform_device_alloc("musb-hdrc", musbid);
+        musb = platform_device_alloc("musb-hdrc", PLATFORM_DEVID_AUTO);
         if (!musb) {
                 dev_err(&pdev->dev, "failed to allocate musb device\n");
-                goto err2;
+                goto err1;
         }
 
         clk = clk_get(&pdev->dev, "usb");
@@ -101,7 +114,6 @@ static int __devinit ux500_probe(struct platform_device *pdev)
                 goto err4;
         }
 
-        musb->id                        = musbid;
         musb->dev.parent                = &pdev->dev;
         musb->dev.dma_mask              = pdev->dev.dma_mask;
         musb->dev.coherent_dma_mask     = pdev->dev.coherent_dma_mask;
@@ -144,9 +156,6 @@ err4:
 err3:
         platform_device_put(musb);
 
-err2:
-        musb_put_id(&pdev->dev, musbid);
-
 err1:
         kfree(glue);
 
@@ -154,13 +163,11 @@ err0:
         return ret;
 }
 
-static int __devexit ux500_remove(struct platform_device *pdev)
+static int ux500_remove(struct platform_device *pdev)
 {
         struct ux500_glue       *glue = platform_get_drvdata(pdev);
 
-        musb_put_id(&pdev->dev, glue->musb->id);
-        platform_device_del(glue->musb);
-        platform_device_put(glue->musb);
+        platform_device_unregister(glue->musb);
         clk_disable(glue->clk);
         clk_put(glue->clk);
         kfree(glue);
@@ -209,7 +216,7 @@ static const struct dev_pm_ops ux500_pm_ops = {
 
 static struct platform_driver ux500_driver = {
         .probe          = ux500_probe,
-        .remove         = __devexit_p(ux500_remove),
+        .remove         = ux500_remove,
         .driver         = {
                 .name   = "musb-ux500",
                 .pm     = DEV_PM_OPS,
@@ -219,15 +226,4 @@ static struct platform_driver ux500_driver = {
 MODULE_DESCRIPTION("UX500 MUSB Glue Layer");
 MODULE_AUTHOR("Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>");
 MODULE_LICENSE("GPL v2");
-
-static int __init ux500_init(void)
-{
-        return platform_driver_register(&ux500_driver);
-}
-module_init(ux500_init);
-
-static void __exit ux500_exit(void)
-{
-        platform_driver_unregister(&ux500_driver);
-}
-module_exit(ux500_exit);
+module_platform_driver(ux500_driver);
diff --git a/drivers/usb/musb/ux500_dma.c b/drivers/usb/musb/ux500_dma.c
index f1059e725ea8..039e567dd3b6 100644
--- a/drivers/usb/musb/ux500_dma.c
+++ b/drivers/usb/musb/ux500_dma.c
@@ -364,8 +364,7 @@ void dma_controller_destroy(struct dma_controller *c)
         kfree(controller);
 }
 
-struct dma_controller *__devinit
-dma_controller_create(struct musb *musb, void __iomem *base)
+struct dma_controller *dma_controller_create(struct musb *musb, void __iomem *base)
 {
         struct ux500_dma_controller *controller;
         struct platform_device *pdev = to_platform_device(musb->controller);
diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig
index 6223062d5d1b..37962c99ff1e 100644
--- a/drivers/usb/otg/Kconfig
+++ b/drivers/usb/otg/Kconfig
@@ -110,7 +110,7 @@ config AB8500_USB
 
 config FSL_USB2_OTG
         bool "Freescale USB OTG Transceiver Driver"
-        depends on USB_EHCI_FSL && USB_GADGET_FSL_USB2 && USB_SUSPEND
+        depends on USB_EHCI_FSL && USB_FSL_USB2 && USB_SUSPEND
         select USB_OTG
         select USB_OTG_UTILS
         help
diff --git a/drivers/usb/otg/ab8500-usb.c b/drivers/usb/otg/ab8500-usb.c
index ae8ad561f083..2d86f26a0183 100644
--- a/drivers/usb/otg/ab8500-usb.c
+++ b/drivers/usb/otg/ab8500-usb.c
@@ -468,7 +468,7 @@ static int ab8500_usb_v2_res_setup(struct platform_device *pdev,
         return 0;
 }
 
-static int __devinit ab8500_usb_probe(struct platform_device *pdev)
+static int ab8500_usb_probe(struct platform_device *pdev)
 {
         struct ab8500_usb       *ab;
         struct usb_otg          *otg;
@@ -546,7 +546,7 @@ fail0:
         return err;
 }
 
-static int __devexit ab8500_usb_remove(struct platform_device *pdev)
+static int ab8500_usb_remove(struct platform_device *pdev)
 {
         struct ab8500_usb *ab = platform_get_drvdata(pdev);
 
@@ -571,7 +571,7 @@ static int __devexit ab8500_usb_remove(struct platform_device *pdev)
 
 static struct platform_driver ab8500_usb_driver = {
         .probe          = ab8500_usb_probe,
-        .remove         = __devexit_p(ab8500_usb_remove),
+        .remove         = ab8500_usb_remove,
         .driver         = {
                 .name   = "ab8500-usb",
                 .owner  = THIS_MODULE,
diff --git a/drivers/usb/otg/fsl_otg.c b/drivers/usb/otg/fsl_otg.c
index c19d1d7173a9..d16adb41eb21 100644
--- a/drivers/usb/otg/fsl_otg.c
+++ b/drivers/usb/otg/fsl_otg.c
@@ -1110,7 +1110,7 @@ static const struct file_operations otg_fops = {
         .release = fsl_otg_release,
 };
 
-static int __devinit fsl_otg_probe(struct platform_device *pdev)
+static int fsl_otg_probe(struct platform_device *pdev)
 {
         int ret;
 
@@ -1144,7 +1144,7 @@ static int __devinit fsl_otg_probe(struct platform_device *pdev)
         return ret;
 }
 
-static int __devexit fsl_otg_remove(struct platform_device *pdev)
+static int fsl_otg_remove(struct platform_device *pdev)
 {
         struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data;
 
@@ -1169,7 +1169,7 @@ static int __devexit fsl_otg_remove(struct platform_device *pdev)
 
 struct platform_driver fsl_otg_driver = {
         .probe = fsl_otg_probe,
-        .remove = __devexit_p(fsl_otg_remove),
+        .remove = fsl_otg_remove,
         .driver = {
                 .name = driver_name,
                 .owner = THIS_MODULE,
diff --git a/drivers/usb/otg/isp1301_omap.c b/drivers/usb/otg/isp1301_omap.c
index ceee2119bffa..af9cb11626b2 100644
--- a/drivers/usb/otg/isp1301_omap.c
+++ b/drivers/usb/otg/isp1301_omap.c
@@ -1493,7 +1493,7 @@ isp1301_start_hnp(struct usb_otg *otg)
 
 /*-------------------------------------------------------------------------*/
 
-static int __devinit
+static int
 isp1301_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
 {
         int                     status;
diff --git a/drivers/usb/otg/msm_otg.c b/drivers/usb/otg/msm_otg.c
index 9f5fc906041a..3b9f0d951132 100644
--- a/drivers/usb/otg/msm_otg.c
+++ b/drivers/usb/otg/msm_otg.c
@@ -1606,7 +1606,7 @@ free_motg:
         return ret;
 }
 
-static int __devexit msm_otg_remove(struct platform_device *pdev)
+static int msm_otg_remove(struct platform_device *pdev)
 {
         struct msm_otg *motg = platform_get_drvdata(pdev);
         struct usb_phy *phy = &motg->phy;
@@ -1746,7 +1746,7 @@ static const struct dev_pm_ops msm_otg_dev_pm_ops = {
 #endif
 
 static struct platform_driver msm_otg_driver = {
-        .remove = __devexit_p(msm_otg_remove),
+        .remove = msm_otg_remove,
         .driver = {
                 .name = DRIVER_NAME,
                 .owner = THIS_MODULE,
diff --git a/drivers/usb/otg/mv_otg.c b/drivers/usb/otg/mv_otg.c
index 3f124e8f5792..eace975991a8 100644
--- a/drivers/usb/otg/mv_otg.c
+++ b/drivers/usb/otg/mv_otg.c
@@ -240,7 +240,7 @@ static void otg_clock_enable(struct mv_otg *mvotg)
         unsigned int i;
 
         for (i = 0; i < mvotg->clknum; i++)
-                clk_enable(mvotg->clk[i]);
+                clk_prepare_enable(mvotg->clk[i]);
 }
 
 static void otg_clock_disable(struct mv_otg *mvotg)
@@ -248,7 +248,7 @@ static void otg_clock_disable(struct mv_otg *mvotg)
         unsigned int i;
 
         for (i = 0; i < mvotg->clknum; i++)
-                clk_disable(mvotg->clk[i]);
+                clk_disable_unprepare(mvotg->clk[i]);
 }
 
 static int mv_otg_enable_internal(struct mv_otg *mvotg)
@@ -958,16 +958,4 @@ static struct platform_driver mv_otg_driver = {
         .resume = mv_otg_resume,
 #endif
 };
-
-static int __init mv_otg_init(void)
-{
-        return platform_driver_register(&mv_otg_driver);
-}
-
-static void __exit mv_otg_exit(void)
-{
-        platform_driver_unregister(&mv_otg_driver);
-}
-
-module_init(mv_otg_init);
-module_exit(mv_otg_exit);
+module_platform_driver(mv_otg_driver);
diff --git a/drivers/usb/otg/mxs-phy.c b/drivers/usb/otg/mxs-phy.c
index 88db976647cf..76302720055a 100644
--- a/drivers/usb/otg/mxs-phy.c
+++ b/drivers/usb/otg/mxs-phy.c
@@ -20,7 +20,6 @@
 #include <linux/delay.h>
 #include <linux/err.h>
 #include <linux/io.h>
-#include <linux/workqueue.h>
 
 #define DRIVER_NAME "mxs_phy"
 
@@ -35,16 +34,9 @@
 #define BM_USBPHY_CTRL_ENUTMILEVEL2             BIT(14)
 #define BM_USBPHY_CTRL_ENHOSTDISCONDETECT       BIT(1)
 
-/*
- * Amount of delay in miliseconds to safely enable ENHOSTDISCONDETECT bit
- * so that connection and reset processing can be completed for the root hub.
- */
-#define MXY_PHY_ENHOSTDISCONDETECT_DELAY        250
-
 struct mxs_phy {
         struct usb_phy phy;
         struct clk *clk;
-        struct delayed_work enhostdiscondetect_work;
 };
 
 #define to_mxs_phy(p) container_of((p), struct mxs_phy, phy)
@@ -70,7 +62,6 @@ static int mxs_phy_init(struct usb_phy *phy)
 
         clk_prepare_enable(mxs_phy->clk);
         mxs_phy_hw_init(mxs_phy);
-        INIT_DELAYED_WORK(&mxs_phy->enhostdiscondetect_work, NULL);
 
         return 0;
 }
@@ -85,46 +76,28 @@ static void mxs_phy_shutdown(struct usb_phy *phy)
         clk_disable_unprepare(mxs_phy->clk);
 }
 
-static void mxs_phy_enhostdiscondetect_delay(struct work_struct *ws)
+static int mxs_phy_on_connect(struct usb_phy *phy,
+                enum usb_device_speed speed)
 {
-        struct mxs_phy *mxs_phy = container_of(ws, struct mxs_phy,
-                                                enhostdiscondetect_work.work);
-
-        /* Enable HOSTDISCONDETECT after delay. */
-        dev_dbg(mxs_phy->phy.dev, "Setting ENHOSTDISCONDETECT\n");
-        writel_relaxed(BM_USBPHY_CTRL_ENHOSTDISCONDETECT,
-                                mxs_phy->phy.io_priv + HW_USBPHY_CTRL_SET);
-}
-
-static int mxs_phy_on_connect(struct usb_phy *phy, int port)
-{
-        struct mxs_phy *mxs_phy = to_mxs_phy(phy);
-
-        dev_dbg(phy->dev, "Connect on port %d\n", port);
-
-        mxs_phy_hw_init(mxs_phy);
+        dev_dbg(phy->dev, "%s speed device has connected\n",
+                (speed == USB_SPEED_HIGH) ? "high" : "non-high");
 
-        /*
-         * Delay enabling ENHOSTDISCONDETECT so that connection and
-         * reset processing can be completed for the root hub.
-         */
-        dev_dbg(phy->dev, "Delaying setting ENHOSTDISCONDETECT\n");
-        PREPARE_DELAYED_WORK(&mxs_phy->enhostdiscondetect_work,
-                        mxs_phy_enhostdiscondetect_delay);
-        schedule_delayed_work(&mxs_phy->enhostdiscondetect_work,
-                        msecs_to_jiffies(MXY_PHY_ENHOSTDISCONDETECT_DELAY));
+        if (speed == USB_SPEED_HIGH)
+                writel_relaxed(BM_USBPHY_CTRL_ENHOSTDISCONDETECT,
+                                phy->io_priv + HW_USBPHY_CTRL_SET);
 
         return 0;
 }
 
-static int mxs_phy_on_disconnect(struct usb_phy *phy, int port)
+static int mxs_phy_on_disconnect(struct usb_phy *phy,
+                enum usb_device_speed speed)
 {
-        dev_dbg(phy->dev, "Disconnect on port %d\n", port);
+        dev_dbg(phy->dev, "%s speed device has disconnected\n",
+                (speed == USB_SPEED_HIGH) ? "high" : "non-high");
 
-        /* No need to delay before clearing ENHOSTDISCONDETECT. */
-        dev_dbg(phy->dev, "Clearing ENHOSTDISCONDETECT\n");
-        writel_relaxed(BM_USBPHY_CTRL_ENHOSTDISCONDETECT,
-                        phy->io_priv + HW_USBPHY_CTRL_CLR);
+        if (speed == USB_SPEED_HIGH)
+                writel_relaxed(BM_USBPHY_CTRL_ENHOSTDISCONDETECT,
+                                phy->io_priv + HW_USBPHY_CTRL_CLR);
 
         return 0;
 }
@@ -176,7 +149,7 @@ static int mxs_phy_probe(struct platform_device *pdev)
         return 0;
 }
 
-static int __devexit mxs_phy_remove(struct platform_device *pdev)
+static int mxs_phy_remove(struct platform_device *pdev)
 {
         platform_set_drvdata(pdev, NULL);
 
@@ -191,7 +164,7 @@ MODULE_DEVICE_TABLE(of, mxs_phy_dt_ids);
 
 static struct platform_driver mxs_phy_driver = {
         .probe = mxs_phy_probe,
-        .remove = __devexit_p(mxs_phy_remove),
+        .remove = mxs_phy_remove,
         .driver = {
                 .name = DRIVER_NAME,
                 .owner  = THIS_MODULE,
diff --git a/drivers/usb/otg/nop-usb-xceiv.c b/drivers/usb/otg/nop-usb-xceiv.c
index e52e35e7adaf..a3ce24b94a73 100644
--- a/drivers/usb/otg/nop-usb-xceiv.c
+++ b/drivers/usb/otg/nop-usb-xceiv.c
@@ -93,7 +93,7 @@ static int nop_set_host(struct usb_otg *otg, struct usb_bus *host)
         return 0;
 }
 
-static int __devinit nop_usb_xceiv_probe(struct platform_device *pdev)
+static int nop_usb_xceiv_probe(struct platform_device *pdev)
 {
         struct nop_usb_xceiv_platform_data *pdata = pdev->dev.platform_data;
         struct nop_usb_xceiv    *nop;
@@ -141,7 +141,7 @@ exit:
         return err;
 }
 
-static int __devexit nop_usb_xceiv_remove(struct platform_device *pdev)
+static int nop_usb_xceiv_remove(struct platform_device *pdev)
 {
         struct nop_usb_xceiv *nop = platform_get_drvdata(pdev);
 
@@ -156,7 +156,7 @@ static int __devexit nop_usb_xceiv_remove(struct platform_device *pdev)
 
 static struct platform_driver nop_usb_xceiv_driver = {
         .probe          = nop_usb_xceiv_probe,
-        .remove         = __devexit_p(nop_usb_xceiv_remove),
+        .remove         = nop_usb_xceiv_remove,
         .driver         = {
                 .name   = "nop_usb_xceiv",
                 .owner  = THIS_MODULE,
diff --git a/drivers/usb/otg/twl4030-usb.c b/drivers/usb/otg/twl4030-usb.c
index f0d2e7530cfe..0a701938ab53 100644
--- a/drivers/usb/otg/twl4030-usb.c
+++ b/drivers/usb/otg/twl4030-usb.c
@@ -123,10 +123,10 @@
 #define PHY_CLK_CTRL_STS                0xFF
 #define PHY_DPLL_CLK                    (1 << 0)
 
-/* In module TWL4030_MODULE_PM_MASTER */
+/* In module TWL_MODULE_PM_MASTER */
 #define STS_HW_CONDITIONS               0x0F
 
-/* In module TWL4030_MODULE_PM_RECEIVER */
+/* In module TWL_MODULE_PM_RECEIVER */
 #define VUSB_DEDICATED1                 0x7D
 #define VUSB_DEDICATED2                 0x7E
 #define VUSB1V5_DEV_GRP                 0x71
@@ -195,14 +195,14 @@ static int twl4030_i2c_write_u8_verify(struct twl4030_usb *twl,
 }
 
 #define twl4030_usb_write_verify(twl, address, data)    \
-        twl4030_i2c_write_u8_verify(twl, TWL4030_MODULE_USB, (data), (address))
+        twl4030_i2c_write_u8_verify(twl, TWL_MODULE_USB, (data), (address))
 
 static inline int twl4030_usb_write(struct twl4030_usb *twl,
                 u8 address, u8 data)
 {
         int ret = 0;
 
-        ret = twl_i2c_write_u8(TWL4030_MODULE_USB, data, address);
+        ret = twl_i2c_write_u8(TWL_MODULE_USB, data, address);
         if (ret < 0)
                 dev_dbg(twl->dev,
                         "TWL4030:USB:Write[0x%x] Error %d\n", address, ret);
@@ -227,7 +227,7 @@ static inline int twl4030_readb(struct twl4030_usb *twl, u8 module, u8 address)
 
 static inline int twl4030_usb_read(struct twl4030_usb *twl, u8 address)
 {
-        return twl4030_readb(twl, TWL4030_MODULE_USB, address);
+        return twl4030_readb(twl, TWL_MODULE_USB, address);
 }
 
 /*-------------------------------------------------------------------------*/
@@ -264,8 +264,7 @@ static enum omap_musb_vbus_id_status
          * signal is active, the OTG module is activated, and
          * its interrupt may be raised (may wake the system).
          */
-        status = twl4030_readb(twl, TWL4030_MODULE_PM_MASTER,
-                        STS_HW_CONDITIONS);
+        status = twl4030_readb(twl, TWL_MODULE_PM_MASTER, STS_HW_CONDITIONS);
         if (status < 0)
                 dev_err(twl->dev, "USB link status err %d\n", status);
         else if (status & (BIT(7) | BIT(2))) {
@@ -372,8 +371,7 @@ static void twl4030_phy_power(struct twl4030_usb *twl, int on)
                  * SLEEP. We work around this by clearing the bit after usv3v1
                  * is re-activated. This ensures that VUSB3V1 is really active.
                  */
-                twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0,
-                                                        VUSB_DEDICATED2);
+                twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB_DEDICATED2);
                 regulator_enable(twl->usb1v5);
                 __twl4030_phy_power(twl, 1);
                 twl4030_usb_write(twl, PHY_CLK_CTRL,
@@ -419,50 +417,48 @@ static void twl4030_phy_resume(struct twl4030_usb *twl)
 static int twl4030_usb_ldo_init(struct twl4030_usb *twl)
 {
         /* Enable writing to power configuration registers */
-        twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER,
-                        TWL4030_PM_MASTER_KEY_CFG1,
-                        TWL4030_PM_MASTER_PROTECT_KEY);
+        twl_i2c_write_u8(TWL_MODULE_PM_MASTER, TWL4030_PM_MASTER_KEY_CFG1,
+                         TWL4030_PM_MASTER_PROTECT_KEY);
 
-        twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER,
-                        TWL4030_PM_MASTER_KEY_CFG2,
-                        TWL4030_PM_MASTER_PROTECT_KEY);
+        twl_i2c_write_u8(TWL_MODULE_PM_MASTER, TWL4030_PM_MASTER_KEY_CFG2,
+                         TWL4030_PM_MASTER_PROTECT_KEY);
 
         /* Keep VUSB3V1 LDO in sleep state until VBUS/ID change detected*/
-        /*twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB_DEDICATED2);*/
+        /*twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB_DEDICATED2);*/
 
         /* input to VUSB3V1 LDO is from VBAT, not VBUS */
-        twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x14, VUSB_DEDICATED1);
+        twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0x14, VUSB_DEDICATED1);
 
         /* Initialize 3.1V regulator */
-        twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB3V1_DEV_GRP);
+        twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB3V1_DEV_GRP);
 
         twl->usb3v1 = regulator_get(twl->dev, "usb3v1");
         if (IS_ERR(twl->usb3v1))
                 return -ENODEV;
 
-        twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB3V1_TYPE);
+        twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB3V1_TYPE);
 
         /* Initialize 1.5V regulator */
-        twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB1V5_DEV_GRP);
+        twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB1V5_DEV_GRP);
 
         twl->usb1v5 = regulator_get(twl->dev, "usb1v5");
         if (IS_ERR(twl->usb1v5))
                 goto fail1;
 
-        twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB1V5_TYPE);
+        twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB1V5_TYPE);
 
         /* Initialize 1.8V regulator */
-        twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB1V8_DEV_GRP);
+        twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB1V8_DEV_GRP);
 
         twl->usb1v8 = regulator_get(twl->dev, "usb1v8");
         if (IS_ERR(twl->usb1v8))
                 goto fail2;
 
-        twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB1V8_TYPE);
+        twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB1V8_TYPE);
 
         /* disable access to power configuration registers */
-        twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, 0,
-                        TWL4030_PM_MASTER_PROTECT_KEY);
+        twl_i2c_write_u8(TWL_MODULE_PM_MASTER, 0,
+                         TWL4030_PM_MASTER_PROTECT_KEY);
 
         return 0;
 
@@ -579,7 +575,7 @@ static int twl4030_set_host(struct usb_otg *otg, struct usb_bus *host)
         return 0;
 }
 
-static int __devinit twl4030_usb_probe(struct platform_device *pdev)
+static int twl4030_usb_probe(struct platform_device *pdev)
 {
         struct twl4030_usb_data *pdata = pdev->dev.platform_data;
         struct twl4030_usb      *twl;
diff --git a/drivers/usb/otg/twl6030-usb.c b/drivers/usb/otg/twl6030-usb.c
index fcadef7864f1..8cd6cf49bdbd 100644
--- a/drivers/usb/otg/twl6030-usb.c
+++ b/drivers/usb/otg/twl6030-usb.c
@@ -310,7 +310,7 @@ static int twl6030_set_vbus(struct phy_companion *comparator, bool enabled)
         return 0;
 }
 
-static int __devinit twl6030_usb_probe(struct platform_device *pdev)
+static int twl6030_usb_probe(struct platform_device *pdev)
 {
         u32 ret;
         struct twl6030_usb      *twl;
diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
index 63c339b3e676..5de6e7f39f9c 100644
--- a/drivers/usb/phy/Kconfig
+++ b/drivers/usb/phy/Kconfig
@@ -6,6 +6,7 @@ comment "USB Physical Layer drivers"
 
 config OMAP_USB2
         tristate "OMAP USB2 PHY Driver"
+        depends on ARCH_OMAP2PLUS
         select USB_OTG_UTILS
         help
           Enable this to support the transceiver that is part of SOC. This
@@ -32,3 +33,15 @@ config MV_U3D_PHY
         help
           Enable this to support Marvell USB 3.0 phy controller for Marvell
           SoC.
+
+config USB_RCAR_PHY
+        tristate "Renesas R-Car USB phy support"
+        depends on USB || USB_GADGET
+        select USB_OTG_UTILS
+        help
+          Say Y here to add support for the Renesas R-Car USB phy driver.
+          This chip is typically used as USB phy for USB host, gadget.
+          This driver supports: R8A7779
+
+          To compile this driver as a module, choose M here: the
+          module will be called rcar-phy.
diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
index b069f29f1225..1a579a860a03 100644
--- a/drivers/usb/phy/Makefile
+++ b/drivers/usb/phy/Makefile
@@ -8,3 +8,4 @@ obj-$(CONFIG_OMAP_USB2)			+= omap-usb2.o
 obj-$(CONFIG_USB_ISP1301)               += isp1301.o
 obj-$(CONFIG_MV_U3D_PHY)                += mv_u3d_phy.o
 obj-$(CONFIG_USB_EHCI_TEGRA)    += tegra_usb_phy.o
+obj-$(CONFIG_USB_RCAR_PHY)              += rcar-phy.o
diff --git a/drivers/usb/phy/mv_u3d_phy.c b/drivers/usb/phy/mv_u3d_phy.c
index 9f1c5d3c60ec..eaddbe3d4304 100644
--- a/drivers/usb/phy/mv_u3d_phy.c
+++ b/drivers/usb/phy/mv_u3d_phy.c
@@ -262,7 +262,7 @@ calstart:
         return 0;
 }
 
-static int __devinit mv_u3d_phy_probe(struct platform_device *pdev)
+static int mv_u3d_phy_probe(struct platform_device *pdev)
 {
         struct mv_u3d_phy *mv_u3d_phy;
         struct mv_usb_platform_data *pdata;
@@ -331,7 +331,7 @@ static int __exit mv_u3d_phy_remove(struct platform_device *pdev)
 
 static struct platform_driver mv_u3d_phy_driver = {
         .probe          = mv_u3d_phy_probe,
-        .remove         = __devexit_p(mv_u3d_phy_remove),
+        .remove         = mv_u3d_phy_remove,
         .driver         = {
                 .name   = "mv-u3d-phy",
                 .owner  = THIS_MODULE,
diff --git a/drivers/usb/phy/omap-usb2.c b/drivers/usb/phy/omap-usb2.c
index 15ab3d6f2e8c..26ae8f49225c 100644
--- a/drivers/usb/phy/omap-usb2.c
+++ b/drivers/usb/phy/omap-usb2.c
@@ -141,7 +141,7 @@ static int omap_usb2_suspend(struct usb_phy *x, int suspend)
         return 0;
 }
 
-static int __devinit omap_usb2_probe(struct platform_device *pdev)
+static int omap_usb2_probe(struct platform_device *pdev)
 {
         struct omap_usb                 *phy;
         struct usb_otg                  *otg;
@@ -199,7 +199,7 @@ static int __devinit omap_usb2_probe(struct platform_device *pdev)
         return 0;
 }
 
-static int __devexit omap_usb2_remove(struct platform_device *pdev)
+static int omap_usb2_remove(struct platform_device *pdev)
 {
         struct omap_usb *phy = platform_get_drvdata(pdev);
 
@@ -254,7 +254,7 @@ MODULE_DEVICE_TABLE(of, omap_usb2_id_table);
 
 static struct platform_driver omap_usb2_driver = {
         .probe          = omap_usb2_probe,
-        .remove         = __devexit_p(omap_usb2_remove),
+        .remove         = omap_usb2_remove,
         .driver         = {
                 .name   = "omap-usb2",
                 .owner  = THIS_MODULE,
diff --git a/drivers/usb/phy/rcar-phy.c b/drivers/usb/phy/rcar-phy.c
new file mode 100644
index 000000000000..a35681b0c501
--- /dev/null
+++ b/drivers/usb/phy/rcar-phy.c
@@ -0,0 +1,220 @@
+/*
+ * Renesas R-Car USB phy driver
+ *
+ * Copyright (C) 2012 Renesas Solutions Corp.
+ * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/usb/otg.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+#include <linux/module.h>
+
+/* USBH common register */
+#define USBPCTRL0       0x0800
+#define USBPCTRL1       0x0804
+#define USBST           0x0808
+#define USBEH0          0x080C
+#define USBOH0          0x081C
+#define USBCTL0         0x0858
+#define EIIBC1          0x0094
+#define EIIBC2          0x009C
+
+/* USBPCTRL1 */
+#define PHY_RST         (1 << 2)
+#define PLL_ENB         (1 << 1)
+#define PHY_ENB         (1 << 0)
+
+/* USBST */
+#define ST_ACT          (1 << 31)
+#define ST_PLL          (1 << 30)
+
+struct rcar_usb_phy_priv {
+        struct usb_phy phy;
+        spinlock_t lock;
+
+        void __iomem *reg0;
+        void __iomem *reg1;
+        int counter;
+};
+
+#define usb_phy_to_priv(p) container_of(p, struct rcar_usb_phy_priv, phy)
+
+
+/*
+ * USB initial/install operation.
+ *
+ * This function setup USB phy.
+ * The used value and setting order came from
+ * [USB :: Initial setting] on datasheet.
+ */
+static int rcar_usb_phy_init(struct usb_phy *phy)
+{
+        struct rcar_usb_phy_priv *priv = usb_phy_to_priv(phy);
+        struct device *dev = phy->dev;
+        void __iomem *reg0 = priv->reg0;
+        void __iomem *reg1 = priv->reg1;
+        int i;
+        u32 val;
+        unsigned long flags;
+
+        spin_lock_irqsave(&priv->lock, flags);
+        if (priv->counter++ == 0) {
+
+                /*
+                 * USB phy start-up
+                 */
+
+                /* (1) USB-PHY standby release */
+                iowrite32(PHY_ENB, (reg0 + USBPCTRL1));
+
+                /* (2) start USB-PHY internal PLL */
+                iowrite32(PHY_ENB | PLL_ENB, (reg0 + USBPCTRL1));
+
+                /* (3) USB module status check */
+                for (i = 0; i < 1024; i++) {
+                        udelay(10);
+                        val = ioread32(reg0 + USBST);
+                        if (val == (ST_ACT | ST_PLL))
+                                break;
+                }
+
+                if (val != (ST_ACT | ST_PLL)) {
+                        dev_err(dev, "USB phy not ready\n");
+                        goto phy_init_end;
+                }
+
+                /* (4) USB-PHY reset clear */
+                iowrite32(PHY_ENB | PLL_ENB | PHY_RST, (reg0 + USBPCTRL1));
+
+                /* set platform specific port settings */
+                iowrite32(0x00000000, (reg0 + USBPCTRL0));
+
+                /*
+                 * EHCI IP internal buffer setting
+                 * EHCI IP internal buffer enable
+                 *
+                 * These are recommended value of a datasheet
+                 * see [USB :: EHCI internal buffer setting]
+                 */
+                iowrite32(0x00ff0040, (reg0 + EIIBC1));
+                iowrite32(0x00ff0040, (reg1 + EIIBC1));
+
+                iowrite32(0x00000001, (reg0 + EIIBC2));
+                iowrite32(0x00000001, (reg1 + EIIBC2));
+
+                /*
+                 * Bus alignment settings
+                 */
+
+                /* (1) EHCI bus alignment (little endian) */
+                iowrite32(0x00000000, (reg0 + USBEH0));
+
+                /* (1) OHCI bus alignment (little endian) */
+                iowrite32(0x00000000, (reg0 + USBOH0));
+        }
+
+phy_init_end:
+        spin_unlock_irqrestore(&priv->lock, flags);
+
+        return 0;
+}
+
+static void rcar_usb_phy_shutdown(struct usb_phy *phy)
+{
+        struct rcar_usb_phy_priv *priv = usb_phy_to_priv(phy);
+        void __iomem *reg0 = priv->reg0;
+        unsigned long flags;
+
+        spin_lock_irqsave(&priv->lock, flags);
+
+        if (priv->counter-- == 1) { /* last user */
+                iowrite32(0x00000000, (reg0 + USBPCTRL0));
+                iowrite32(0x00000000, (reg0 + USBPCTRL1));
+        }
+
+        spin_unlock_irqrestore(&priv->lock, flags);
+}
+
+static int rcar_usb_phy_probe(struct platform_device *pdev)
+{
+        struct rcar_usb_phy_priv *priv;
+        struct resource *res0, *res1;
+        struct device *dev = &pdev->dev;
+        void __iomem *reg0, *reg1;
+        int ret;
+
+        res0 = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+        res1 = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+        if (!res0 || !res1) {
+                dev_err(dev, "Not enough platform resources\n");
+                return -EINVAL;
+        }
+
+        /*
+         * CAUTION
+         *
+         * Because this phy address is also mapped under OHCI/EHCI address area,
+         * this driver can't use devm_request_and_ioremap(dev, res) here
+         */
+        reg0 = devm_ioremap_nocache(dev, res0->start, resource_size(res0));
+        reg1 = devm_ioremap_nocache(dev, res1->start, resource_size(res1));
+        if (!reg0 || !reg1) {
+                dev_err(dev, "ioremap error\n");
+                return -ENOMEM;
+        }
+
+        priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+        if (!priv) {
+                dev_err(dev, "priv data allocation error\n");
+                return -ENOMEM;
+        }
+
+        priv->reg0              = reg0;
+        priv->reg1              = reg1;
+        priv->counter           = 0;
+        priv->phy.dev           = dev;
+        priv->phy.label         = dev_name(dev);
+        priv->phy.init          = rcar_usb_phy_init;
+        priv->phy.shutdown      = rcar_usb_phy_shutdown;
+        spin_lock_init(&priv->lock);
+
+        ret = usb_add_phy(&priv->phy, USB_PHY_TYPE_USB2);
+        if (ret < 0) {
+                dev_err(dev, "usb phy addition error\n");
+                return ret;
+        }
+
+        platform_set_drvdata(pdev, priv);
+
+        return ret;
+}
+
+static int rcar_usb_phy_remove(struct platform_device *pdev)
+{
+        struct rcar_usb_phy_priv *priv = platform_get_drvdata(pdev);
+
+        usb_remove_phy(&priv->phy);
+
+        return 0;
+}
+
+static struct platform_driver rcar_usb_phy_driver = {
+        .driver         = {
+                .name   = "rcar_usb_phy",
+        },
+        .probe          = rcar_usb_phy_probe,
+        .remove         = rcar_usb_phy_remove,
+};
+
+module_platform_driver(rcar_usb_phy_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Renesas R-Car USB phy");
+MODULE_AUTHOR("Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>");
diff --git a/drivers/usb/phy/tegra_usb_phy.c b/drivers/usb/phy/tegra_usb_phy.c
index 987116f9efcd..9d13c81754e0 100644
--- a/drivers/usb/phy/tegra_usb_phy.c
+++ b/drivers/usb/phy/tegra_usb_phy.c
@@ -29,7 +29,9 @@
 #include <linux/usb/ulpi.h>
 #include <asm/mach-types.h>
 #include <linux/usb/tegra_usb_phy.h>
-#include <mach/iomap.h>
+
+#define TEGRA_USB_BASE          0xC5000000
+#define TEGRA_USB_SIZE          SZ_16K
 
 #define ULPI_VIEWPORT           0x170
 
diff --git a/drivers/usb/renesas_usbhs/common.c b/drivers/usb/renesas_usbhs/common.c
index 072edc1cc55f..38bce046f4d0 100644
--- a/drivers/usb/renesas_usbhs/common.c
+++ b/drivers/usb/renesas_usbhs/common.c
@@ -132,6 +132,11 @@ void usbhs_sys_function_ctrl(struct usbhs_priv *priv, int enable)
         usbhs_bset(priv, SYSCFG, mask, enable ? val : 0);
 }
 
+void usbhs_sys_function_pullup(struct usbhs_priv *priv, int enable)
+{
+        usbhs_bset(priv, SYSCFG, DPRPU, enable ? DPRPU : 0);
+}
+
 void usbhs_sys_set_test_mode(struct usbhs_priv *priv, u16 mode)
 {
         usbhs_write(priv, TESTMODE, mode);
@@ -551,7 +556,7 @@ probe_end_pipe_exit:
         return ret;
 }
 
-static int __devexit usbhs_remove(struct platform_device *pdev)
+static int usbhs_remove(struct platform_device *pdev)
 {
         struct usbhs_priv *priv = usbhs_pdev_to_priv(pdev);
         struct renesas_usbhs_platform_info *info = pdev->dev.platform_data;
@@ -631,7 +636,7 @@ static struct platform_driver renesas_usbhs_driver = {
                 .pm     = &usbhsc_pm_ops,
         },
         .probe          = usbhs_probe,
-        .remove         = __devexit_p(usbhs_remove),
+        .remove         = usbhs_remove,
 };
 
 module_platform_driver(renesas_usbhs_driver);
diff --git a/drivers/usb/renesas_usbhs/common.h b/drivers/usb/renesas_usbhs/common.h
index dddf40a59ded..c69dd2fba360 100644
--- a/drivers/usb/renesas_usbhs/common.h
+++ b/drivers/usb/renesas_usbhs/common.h
@@ -285,6 +285,7 @@ void usbhs_bset(struct usbhs_priv *priv, u32 reg, u16 mask, u16 data);
  */
 void usbhs_sys_host_ctrl(struct usbhs_priv *priv, int enable);
 void usbhs_sys_function_ctrl(struct usbhs_priv *priv, int enable);
+void usbhs_sys_function_pullup(struct usbhs_priv *priv, int enable);
 void usbhs_sys_set_test_mode(struct usbhs_priv *priv, u16 mode);
 
 /*
diff --git a/drivers/usb/renesas_usbhs/fifo.c b/drivers/usb/renesas_usbhs/fifo.c
index c021b202c0f3..9538f0feafe2 100644
--- a/drivers/usb/renesas_usbhs/fifo.c
+++ b/drivers/usb/renesas_usbhs/fifo.c
@@ -163,7 +163,7 @@ static int usbhsf_pkt_handler(struct usbhs_pipe *pipe, int type)
                 func = pkt->handler->dma_done;
                 break;
         default:
-                dev_err(dev, "unknown pkt hander\n");
+                dev_err(dev, "unknown pkt handler\n");
                 goto __usbhs_pkt_handler_end;
         }
 
@@ -192,8 +192,8 @@ void usbhs_pkt_start(struct usbhs_pipe *pipe)
 /*
  *              irq enable/disable function
  */
-#define usbhsf_irq_empty_ctrl(p, e) usbhsf_irq_callback_ctrl(p, bempsts, e)
-#define usbhsf_irq_ready_ctrl(p, e) usbhsf_irq_callback_ctrl(p, brdysts, e)
+#define usbhsf_irq_empty_ctrl(p, e) usbhsf_irq_callback_ctrl(p, irq_bempsts, e)
+#define usbhsf_irq_ready_ctrl(p, e) usbhsf_irq_callback_ctrl(p, irq_brdysts, e)
 #define usbhsf_irq_callback_ctrl(pipe, status, enable)                  \
         ({                                                              \
                 struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);     \
@@ -202,9 +202,9 @@ void usbhs_pkt_start(struct usbhs_pipe *pipe)
                 if (!mod)                                               \
                         return;                                         \
                 if (enable)                                             \
-                        mod->irq_##status |= status;                    \
+                        mod->status |= status;                          \
                 else                                                    \
-                        mod->irq_##status &= ~status;                   \
+                        mod->status &= ~status;                         \
                 usbhs_irq_callback_update(priv, mod);                   \
         })
 
@@ -488,6 +488,8 @@ static int usbhsf_pio_try_push(struct usbhs_pkt *pkt, int *is_done)
         usbhs_pipe_data_sequence(pipe, pkt->sequence);
         pkt->sequence = -1; /* -1 sequence will be ignored */
 
+        usbhs_pipe_set_trans_count_if_bulk(pipe, pkt->length);
+
         ret = usbhsf_fifo_select(pipe, fifo, 1);
         if (ret < 0)
                 return 0;
@@ -594,6 +596,7 @@ static int usbhsf_prepare_pop(struct usbhs_pkt *pkt, int *is_done)
         usbhs_pipe_data_sequence(pipe, pkt->sequence);
         pkt->sequence = -1; /* -1 sequence will be ignored */
 
+        usbhs_pipe_set_trans_count_if_bulk(pipe, pkt->length);
         usbhs_pipe_enable(pipe);
         usbhsf_rx_irq_ctrl(pipe, 1);
 
@@ -795,6 +798,7 @@ static void xfer_work(struct work_struct *work)
         dev_dbg(dev, "  %s %d (%d/ %d)\n",
                 fifo->name, usbhs_pipe_number(pipe), pkt->length, pkt->zero);
 
+        usbhs_pipe_set_trans_count_if_bulk(pipe, pkt->trans);
         usbhs_pipe_enable(pipe);
         usbhsf_dma_start(pipe, fifo);
         dma_async_issue_pending(chan);
diff --git a/drivers/usb/renesas_usbhs/mod.c b/drivers/usb/renesas_usbhs/mod.c
index 61933a90e5bf..6a030b931a3b 100644
--- a/drivers/usb/renesas_usbhs/mod.c
+++ b/drivers/usb/renesas_usbhs/mod.c
@@ -151,7 +151,7 @@ int usbhs_mod_probe(struct usbhs_priv *priv)
                 goto mod_init_host_err;
 
         /* irq settings */
-        ret = request_irq(priv->irq, usbhs_interrupt,
+        ret = devm_request_irq(dev, priv->irq, usbhs_interrupt,
                           priv->irqflags, dev_name(dev), priv);
         if (ret) {
                 dev_err(dev, "irq request err\n");
@@ -172,7 +172,6 @@ void usbhs_mod_remove(struct usbhs_priv *priv)
 {
         usbhs_mod_host_remove(priv);
         usbhs_mod_gadget_remove(priv);
-        free_irq(priv->irq, priv);
 }
 
 /*
diff --git a/drivers/usb/renesas_usbhs/mod_gadget.c b/drivers/usb/renesas_usbhs/mod_gadget.c
index 28478ce26c34..f2985cd88021 100644
--- a/drivers/usb/renesas_usbhs/mod_gadget.c
+++ b/drivers/usb/renesas_usbhs/mod_gadget.c
@@ -545,15 +545,6 @@ static int usbhsg_pipe_disable(struct usbhsg_uep *uep)
         return 0;
 }
 
-static void usbhsg_uep_init(struct usbhsg_gpriv *gpriv)
-{
-        int i;
-        struct usbhsg_uep *uep;
-
-        usbhsg_for_each_uep_with_dcp(uep, gpriv, i)
-                uep->pipe = NULL;
-}
-
 /*
  *
  *              usb_ep_ops
@@ -610,7 +601,12 @@ static int usbhsg_ep_disable(struct usb_ep *ep)
 {
         struct usbhsg_uep *uep = usbhsg_ep_to_uep(ep);
 
-        return usbhsg_pipe_disable(uep);
+        usbhsg_pipe_disable(uep);
+
+        uep->pipe->mod_private  = NULL;
+        uep->pipe               = NULL;
+
+        return 0;
 }
 
 static struct usb_request *usbhsg_ep_alloc_request(struct usb_ep *ep,
@@ -761,9 +757,8 @@ static int usbhsg_try_start(struct usbhs_priv *priv, u32 status)
         usbhs_pipe_init(priv,
                         usbhsg_dma_map_ctrl);
         usbhs_fifo_init(priv);
-        usbhsg_uep_init(gpriv);
 
-        /* dcp init */
+        /* dcp init instead of usbhsg_ep_enable() */
         dcp->pipe               = usbhs_dcp_malloc(priv);
         dcp->pipe->mod_private  = dcp;
         usbhs_pipe_config_update(dcp->pipe, 0, 0, 64);
@@ -825,7 +820,7 @@ static int usbhsg_try_stop(struct usbhs_priv *priv, u32 status)
         usbhs_sys_set_test_mode(priv, 0);
         usbhs_sys_function_ctrl(priv, 0);
 
-        usbhsg_pipe_disable(dcp);
+        usbhsg_ep_disable(&dcp->ep);
 
         dev_dbg(dev, "stop gadget\n");
 
@@ -883,6 +878,16 @@ static int usbhsg_get_frame(struct usb_gadget *gadget)
         return usbhs_frame_get_num(priv);
 }
 
+static int usbhsg_pullup(struct usb_gadget *gadget, int is_on)
+{
+        struct usbhsg_gpriv *gpriv = usbhsg_gadget_to_gpriv(gadget);
+        struct usbhs_priv *priv = usbhsg_gpriv_to_priv(gpriv);
+
+        usbhs_sys_function_pullup(priv, is_on);
+
+        return 0;
+}
+
 static int usbhsg_set_selfpowered(struct usb_gadget *gadget, int is_self)
 {
         struct usbhsg_gpriv *gpriv = usbhsg_gadget_to_gpriv(gadget);
@@ -900,6 +905,7 @@ static struct usb_gadget_ops usbhsg_gadget_ops = {
         .set_selfpowered        = usbhsg_set_selfpowered,
         .udc_start              = usbhsg_gadget_start,
         .udc_stop               = usbhsg_gadget_stop,
+        .pullup                 = usbhsg_pullup,
 };
 
 static int usbhsg_start(struct usbhs_priv *priv)
@@ -987,6 +993,7 @@ int usbhs_mod_gadget_probe(struct usbhs_priv *priv)
          */
         usbhsg_for_each_uep_with_dcp(uep, gpriv, i) {
                 uep->gpriv      = gpriv;
+                uep->pipe       = NULL;
                 snprintf(uep->ep_name, EP_NAME_SIZE, "ep%d", i);
 
                 uep->ep.name            = uep->ep_name;
diff --git a/drivers/usb/renesas_usbhs/mod_host.c b/drivers/usb/renesas_usbhs/mod_host.c
index 069cd765400c..b86815421c8d 100644
--- a/drivers/usb/renesas_usbhs/mod_host.c
+++ b/drivers/usb/renesas_usbhs/mod_host.c
@@ -85,6 +85,7 @@ struct usbhsh_ep {
         struct usbhsh_device    *udev;   /* attached udev */
         struct usb_host_endpoint *ep;
         struct list_head        ep_list; /* list to usbhsh_device */
+        unsigned int            counter; /* pipe attach counter */
 };
 
 #define USBHSH_DEVICE_MAX       10 /* see DEVADDn / DCPMAXP / PIPEMAXP */
@@ -271,8 +272,12 @@ static int usbhsh_pipe_attach(struct usbhsh_hpriv *hpriv,
         /********************  spin lock ********************/
         usbhs_lock(priv, flags);
 
-        if (unlikely(usbhsh_uep_to_pipe(uep))) {
-                dev_err(dev, "uep already has pipe\n");
+        /*
+         * if uep has been attached to pipe,
+         * reuse it
+         */
+        if (usbhsh_uep_to_pipe(uep)) {
+                ret = 0;
                 goto usbhsh_pipe_attach_done;
         }
 
@@ -320,6 +325,9 @@ static int usbhsh_pipe_attach(struct usbhsh_hpriv *hpriv,
         }
 
 usbhsh_pipe_attach_done:
+        if (0 == ret)
+                uep->counter++;
+
         usbhs_unlock(priv, flags);
         /********************  spin unlock ******************/
 
@@ -346,7 +354,7 @@ static void usbhsh_pipe_detach(struct usbhsh_hpriv *hpriv,
 
         if (unlikely(!pipe)) {
                 dev_err(dev, "uep doens't have pipe\n");
-        } else {
+        } else if (1 == uep->counter--) { /* last user */
                 struct usb_host_endpoint *ep = usbhsh_uep_to_ep(uep);
                 struct usbhsh_device *udev = usbhsh_uep_to_udev(uep);
 
@@ -391,6 +399,7 @@ static int usbhsh_endpoint_attach(struct usbhsh_hpriv *hpriv,
         /*
          * init endpoint
          */
+        uep->counter = 0;
         INIT_LIST_HEAD(&uep->ep_list);
         list_add_tail(&uep->ep_list, &udev->ep_list_head);
 
@@ -652,9 +661,10 @@ static void usbhsh_queue_done(struct usbhs_priv *priv, struct usbhs_pkt *pkt)
                 status = -ESHUTDOWN;
 
         urb->actual_length = pkt->actual;
-        usbhsh_ureq_free(hpriv, ureq);
 
         usbhsh_endpoint_sequence_save(hpriv, urb, pkt);
+        usbhsh_ureq_free(hpriv, ureq);
+
         usbhsh_pipe_detach(hpriv, usbhsh_ep_to_uep(urb->ep));
 
         usb_hcd_unlink_urb_from_ep(hcd, urb);
@@ -686,9 +696,9 @@ static int usbhsh_queue_push(struct usb_hcd *hcd,
         }
 
         if (usb_pipein(urb->pipe))
-                pipe->handler = &usbhs_fifo_pio_pop_handler;
+                pipe->handler = &usbhs_fifo_dma_pop_handler;
         else
-                pipe->handler = &usbhs_fifo_pio_push_handler;
+                pipe->handler = &usbhs_fifo_dma_push_handler;
 
         buf = (void *)(urb->transfer_buffer + urb->actual_length);
         len = urb->transfer_buffer_length - urb->actual_length;
@@ -921,6 +931,19 @@ static int usbhsh_dcp_queue_push(struct usb_hcd *hcd,
  */
 static int usbhsh_dma_map_ctrl(struct usbhs_pkt *pkt, int map)
 {
+        if (map) {
+                struct usbhsh_request *ureq = usbhsh_pkt_to_ureq(pkt);
+                struct urb *urb = ureq->urb;
+
+                /* it can not use scatter/gather */
+                if (urb->num_sgs)
+                        return -EINVAL;
+
+                pkt->dma = urb->transfer_dma;
+                if (!pkt->dma)
+                        return -EINVAL;
+        }
+
         return 0;
 }
 
@@ -946,7 +969,6 @@ static int usbhsh_urb_enqueue(struct usb_hcd *hcd,
         struct usb_host_endpoint *ep = urb->ep;
         struct usbhsh_device *new_udev = NULL;
         int is_dir_in = usb_pipein(urb->pipe);
-        int i;
         int ret;
 
         dev_dbg(dev, "%s (%s)\n", __func__, is_dir_in ? "in" : "out");
@@ -992,13 +1014,7 @@ static int usbhsh_urb_enqueue(struct usb_hcd *hcd,
          * attach pipe to endpoint
          * see [image of mod_host]
          */
-        for (i = 0; i < 1024; i++) {
-                ret = usbhsh_pipe_attach(hpriv, urb);
-                if (ret < 0)
-                        msleep(100);
-                else
-                        break;
-        }
+        ret = usbhsh_pipe_attach(hpriv, urb);
         if (ret < 0) {
                 dev_err(dev, "pipe attach failed\n");
                 goto usbhsh_urb_enqueue_error_free_endpoint;
@@ -1072,8 +1088,6 @@ static void usbhsh_endpoint_disable(struct usb_hcd *hcd,
 static int usbhsh_hub_status_data(struct usb_hcd *hcd, char *buf)
 {
         struct usbhsh_hpriv *hpriv = usbhsh_hcd_to_hpriv(hcd);
-        struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv);
-        struct device *dev = usbhs_priv_to_dev(priv);
         int roothub_id = 1; /* only 1 root hub */
 
         /*
@@ -1085,8 +1099,6 @@ static int usbhsh_hub_status_data(struct usb_hcd *hcd, char *buf)
         else
                 *buf = 0;
 
-        dev_dbg(dev, "%s (%02x)\n", __func__, *buf);
-
         return !!(*buf);
 }
 
diff --git a/drivers/usb/renesas_usbhs/pipe.c b/drivers/usb/renesas_usbhs/pipe.c
index 122526cfd32b..7926e1c700f1 100644
--- a/drivers/usb/renesas_usbhs/pipe.c
+++ b/drivers/usb/renesas_usbhs/pipe.c
@@ -93,6 +93,82 @@ static void usbhsp_pipe_cfg_set(struct usbhs_pipe *pipe, u16 mask, u16 val)
 }
 
 /*
+ *              PIPEnTRN/PIPEnTRE functions
+ */
+static void usbhsp_pipe_trn_set(struct usbhs_pipe *pipe, u16 mask, u16 val)
+{
+        struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
+        struct device *dev = usbhs_priv_to_dev(priv);
+        int num = usbhs_pipe_number(pipe);
+        u16 reg;
+
+        /*
+         * It is impossible to calculate address,
+         * since PIPEnTRN addresses were mapped randomly.
+         */
+#define CASE_PIPExTRN(a)                \
+        case 0x ## a:                   \
+                reg = PIPE ## a ## TRN; \
+                break;
+
+        switch (num) {
+        CASE_PIPExTRN(1);
+        CASE_PIPExTRN(2);
+        CASE_PIPExTRN(3);
+        CASE_PIPExTRN(4);
+        CASE_PIPExTRN(5);
+        CASE_PIPExTRN(B);
+        CASE_PIPExTRN(C);
+        CASE_PIPExTRN(D);
+        CASE_PIPExTRN(E);
+        CASE_PIPExTRN(F);
+        CASE_PIPExTRN(9);
+        CASE_PIPExTRN(A);
+        default:
+                dev_err(dev, "unknown pipe (%d)\n", num);
+                return;
+        }
+        __usbhsp_pipe_xxx_set(pipe, 0, reg, mask, val);
+}
+
+static void usbhsp_pipe_tre_set(struct usbhs_pipe *pipe, u16 mask, u16 val)
+{
+        struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
+        struct device *dev = usbhs_priv_to_dev(priv);
+        int num = usbhs_pipe_number(pipe);
+        u16 reg;
+
+        /*
+         * It is impossible to calculate address,
+         * since PIPEnTRE addresses were mapped randomly.
+         */
+#define CASE_PIPExTRE(a)                        \
+        case 0x ## a:                           \
+                reg = PIPE ## a ## TRE;         \
+                break;
+
+        switch (num) {
+        CASE_PIPExTRE(1);
+        CASE_PIPExTRE(2);
+        CASE_PIPExTRE(3);
+        CASE_PIPExTRE(4);
+        CASE_PIPExTRE(5);
+        CASE_PIPExTRE(B);
+        CASE_PIPExTRE(C);
+        CASE_PIPExTRE(D);
+        CASE_PIPExTRE(E);
+        CASE_PIPExTRE(F);
+        CASE_PIPExTRE(9);
+        CASE_PIPExTRE(A);
+        default:
+                dev_err(dev, "unknown pipe (%d)\n", num);
+                return;
+        }
+
+        __usbhsp_pipe_xxx_set(pipe, 0, reg, mask, val);
+}
+
+/*
  *              PIPEBUF
  */
 static void usbhsp_pipe_buf_set(struct usbhs_pipe *pipe, u16 mask, u16 val)
@@ -264,6 +340,31 @@ int usbhs_pipe_is_stall(struct usbhs_pipe *pipe)
         return (int)(pid == PID_STALL10 || pid == PID_STALL11);
 }
 
+void usbhs_pipe_set_trans_count_if_bulk(struct usbhs_pipe *pipe, int len)
+{
+        if (!usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_BULK))
+                return;
+
+        /*
+         * clear and disable transfer counter for IN/OUT pipe
+         */
+        usbhsp_pipe_tre_set(pipe, TRCLR | TRENB, TRCLR);
+
+        /*
+         * Only IN direction bulk pipe can use transfer count.
+         * Without using this function,
+         * received data will break if it was large data size.
+         * see PIPEnTRN/PIPEnTRE for detail
+         */
+        if (usbhs_pipe_is_dir_in(pipe)) {
+                int maxp = usbhs_pipe_get_maxpacket(pipe);
+
+                usbhsp_pipe_trn_set(pipe, 0xffff, DIV_ROUND_UP(len, maxp));
+                usbhsp_pipe_tre_set(pipe, TRENB, TRENB); /* enable */
+        }
+}
+
+
 /*
  *              pipe setup
  */
diff --git a/drivers/usb/renesas_usbhs/pipe.h b/drivers/usb/renesas_usbhs/pipe.h
index 3d80c7b1fd1b..b476fde955bf 100644
--- a/drivers/usb/renesas_usbhs/pipe.h
+++ b/drivers/usb/renesas_usbhs/pipe.h
@@ -88,6 +88,7 @@ void usbhs_pipe_enable(struct usbhs_pipe *pipe);
 void usbhs_pipe_disable(struct usbhs_pipe *pipe);
 void usbhs_pipe_stall(struct usbhs_pipe *pipe);
 int usbhs_pipe_is_stall(struct usbhs_pipe *pipe);
+void usbhs_pipe_set_trans_count_if_bulk(struct usbhs_pipe *pipe, int len);
 void usbhs_pipe_select_fifo(struct usbhs_pipe *pipe, struct usbhs_fifo *fifo);
 void usbhs_pipe_config_update(struct usbhs_pipe *pipe, u16 devsel,
                               u16 epnum, u16 maxp);
diff --git a/drivers/usb/serial/aircable.c b/drivers/usb/serial/aircable.c
index 54e1bb6372e7..6d110a3bc7e7 100644
--- a/drivers/usb/serial/aircable.c
+++ b/drivers/usb/serial/aircable.c
@@ -68,10 +68,6 @@
 #define THROTTLED               0x01
 #define ACTUALLY_THROTTLED      0x02
 
-/*
- * Version Information
- */
-#define DRIVER_VERSION "v2.0"
 #define DRIVER_AUTHOR "Naranjo, Manuel Francisco <naranjo.manuel@gmail.com>, Johan Hovold <jhovold@gmail.com>"
 #define DRIVER_DESC "AIRcable USB Driver"
 
@@ -192,5 +188,4 @@ module_usb_serial_driver(serial_drivers, id_table);
 
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_VERSION(DRIVER_VERSION);
 MODULE_LICENSE("GPL");
diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c
index bd50a8a41a0f..a88882c0e237 100644
--- a/drivers/usb/serial/ark3116.c
+++ b/drivers/usb/serial/ark3116.c
@@ -37,11 +37,6 @@
 #include <linux/mutex.h>
 #include <linux/spinlock.h>
 
-/*
- * Version information
- */
-
-#define DRIVER_VERSION "v0.7"
 #define DRIVER_AUTHOR "Bart Hartgers <bart.hartgers+ark3116@gmail.com>"
 #define DRIVER_DESC "USB ARK3116 serial/IrDA driver"
 #define DRIVER_DEV_DESC "ARK3116 RS232/IrDA"
diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c
index ea29556f0d72..b72a4c166705 100644
--- a/drivers/usb/serial/belkin_sa.c
+++ b/drivers/usb/serial/belkin_sa.c
@@ -37,10 +37,6 @@
 #include <linux/usb/serial.h>
 #include "belkin_sa.h"
 
-/*
- * Version Information
- */
-#define DRIVER_VERSION "v1.3"
 #define DRIVER_AUTHOR "William Greathouse <wgreathouse@smva.com>"
 #define DRIVER_DESC "USB Belkin Serial converter driver"
 
@@ -509,5 +505,4 @@ module_usb_serial_driver(serial_drivers, id_table);
 
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_VERSION(DRIVER_VERSION);
 MODULE_LICENSE("GPL");
diff --git a/drivers/usb/serial/bus.c b/drivers/usb/serial/bus.c
index c15f2e7cefc7..37decb13d7eb 100644
--- a/drivers/usb/serial/bus.c
+++ b/drivers/usb/serial/bus.c
@@ -121,7 +121,6 @@ static int usb_serial_device_remove(struct device *dev)
         return retval;
 }
 
-#ifdef CONFIG_HOTPLUG
 static ssize_t store_new_id(struct device_driver *driver,
                             const char *buf, size_t count)
 {
@@ -159,15 +158,6 @@ static void free_dynids(struct usb_serial_driver *drv)
         spin_unlock(&drv->dynids.lock);
 }
 
-#else
-static struct driver_attribute drv_attrs[] = {
-        __ATTR_NULL,
-};
-static inline void free_dynids(struct usb_serial_driver *drv)
-{
-}
-#endif
-
 struct bus_type usb_serial_bus_type = {
         .name =         "usb-serial",
         .match =        usb_serial_device_match,
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index eb033fc92a15..f14736f647ff 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -24,10 +24,6 @@
 #include <linux/uaccess.h>
 #include <linux/usb/serial.h>
 
-/*
- * Version Information
- */
-#define DRIVER_VERSION "v0.09"
 #define DRIVER_DESC "Silicon Labs CP210x RS232 serial adaptor driver"
 
 /*
@@ -35,8 +31,7 @@
  */
 static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *);
 static void cp210x_close(struct usb_serial_port *);
-static void cp210x_get_termios(struct tty_struct *,
-        struct usb_serial_port *port);
+static void cp210x_get_termios(struct tty_struct *, struct usb_serial_port *);
 static void cp210x_get_termios_port(struct usb_serial_port *port,
         unsigned int *cflagp, unsigned int *baudp);
 static void cp210x_change_speed(struct tty_struct *, struct usb_serial_port *,
@@ -118,6 +113,7 @@ static const struct usb_device_id id_table[] = {
         { USB_DEVICE(0x10C4, 0x8477) }, /* Balluff RFID */
         { USB_DEVICE(0x10C4, 0x85EA) }, /* AC-Services IBUS-IF */
         { USB_DEVICE(0x10C4, 0x85EB) }, /* AC-Services CIS-IBUS */
+        { USB_DEVICE(0x10C4, 0x85F8) }, /* Virtenio Preon32 */
         { USB_DEVICE(0x10C4, 0x8664) }, /* AC-Services CAN-IF */
         { USB_DEVICE(0x10C4, 0x8665) }, /* AC-Services OBD-IF */
         { USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */
@@ -169,7 +165,7 @@ struct cp210x_serial_private {
 static struct usb_serial_driver cp210x_device = {
         .driver = {
                 .owner =        THIS_MODULE,
-                .name =         "cp210x",
+                .name =         "cp210x",
         },
         .id_table               = id_table,
         .num_ports              = 1,
@@ -179,7 +175,7 @@ static struct usb_serial_driver cp210x_device = {
         .close                  = cp210x_close,
         .break_ctl              = cp210x_break_ctl,
         .set_termios            = cp210x_set_termios,
-        .tiocmget               = cp210x_tiocmget,
+        .tiocmget               = cp210x_tiocmget,
         .tiocmset               = cp210x_tiocmset,
         .attach                 = cp210x_startup,
         .release                = cp210x_release,
@@ -281,7 +277,7 @@ static int cp210x_get_config(struct usb_serial_port *port, u8 request,
         int result, i, length;
 
         /* Number of integers required to contain the array */
-        length = (((size - 1) | 3) + 1)/4;
+        length = (((size - 1) | 3) + 1) / 4;
 
         buf = kcalloc(length, sizeof(__le32), GFP_KERNEL);
         if (!buf) {
@@ -328,12 +324,11 @@ static int cp210x_set_config(struct usb_serial_port *port, u8 request,
         int result, i, length;
 
         /* Number of integers required to contain the array */
-        length = (((size - 1) | 3) + 1)/4;
+        length = (((size - 1) | 3) + 1) / 4;
 
         buf = kmalloc(length * sizeof(__le32), GFP_KERNEL);
         if (!buf) {
-                dev_err(&port->dev, "%s - out of memory.\n",
-                                __func__);
+                dev_err(&port->dev, "%s - out of memory.\n", __func__);
                 return -ENOMEM;
         }
 
@@ -384,7 +379,8 @@ static inline int cp210x_set_config_single(struct usb_serial_port *port,
  * cp210x_quantise_baudrate
  * Quantises the baud rate as per AN205 Table 1
  */
-static unsigned int cp210x_quantise_baudrate(unsigned int baud) {
+static unsigned int cp210x_quantise_baudrate(unsigned int baud)
+{
         if (baud <= 300)
                 baud = 300;
         else if (baud <= 600)      baud = 600;
@@ -467,9 +463,7 @@ static void cp210x_get_termios(struct tty_struct *tty,
                 cp210x_get_termios_port(tty->driver_data,
                         &tty->termios.c_cflag, &baud);
                 tty_encode_baud_rate(tty, baud, baud);
-        }
-
-        else {
+        } else {
                 unsigned int cflag;
                 cflag = 0;
                 cp210x_get_termios_port(port, &cflag, &baud);
@@ -693,8 +687,8 @@ static void cp210x_set_termios(struct tty_struct *tty,
                         break;*/
                 default:
                         dev_dbg(dev, "cp210x driver does not support the number of bits requested, using 8 bit mode\n");
-                                bits |= BITS_DATA_8;
-                                break;
+                        bits |= BITS_DATA_8;
+                        break;
                 }
                 if (cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2))
                         dev_dbg(dev, "Number of data bits requested not supported by device\n");
@@ -767,7 +761,7 @@ static void cp210x_set_termios(struct tty_struct *tty,
 
 }
 
-static int cp210x_tiocmset (struct tty_struct *tty,
+static int cp210x_tiocmset(struct tty_struct *tty,
                 unsigned int set, unsigned int clear)
 {
         struct usb_serial_port *port = tty->driver_data;
@@ -809,7 +803,7 @@ static void cp210x_dtr_rts(struct usb_serial_port *p, int on)
                 cp210x_tiocmset_port(p, 0, TIOCM_DTR|TIOCM_RTS);
 }
 
-static int cp210x_tiocmget (struct tty_struct *tty)
+static int cp210x_tiocmget(struct tty_struct *tty)
 {
         struct usb_serial_port *port = tty->driver_data;
         unsigned int control;
@@ -829,7 +823,7 @@ static int cp210x_tiocmget (struct tty_struct *tty)
         return result;
 }
 
-static void cp210x_break_ctl (struct tty_struct *tty, int break_state)
+static void cp210x_break_ctl(struct tty_struct *tty, int break_state)
 {
         struct usb_serial_port *port = tty->driver_data;
         unsigned int state;
@@ -874,5 +868,4 @@ static void cp210x_release(struct usb_serial *serial)
 module_usb_serial_driver(serial_drivers, id_table);
 
 MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_VERSION(DRIVER_VERSION);
 MODULE_LICENSE("GPL");
diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c
index 4ee77dcbe690..69a4fa1cee25 100644
--- a/drivers/usb/serial/cyberjack.c
+++ b/drivers/usb/serial/cyberjack.c
@@ -43,10 +43,6 @@
 
 #define CYBERJACK_LOCAL_BUF_SIZE 32
 
-/*
- * Version Information
- */
-#define DRIVER_VERSION "v1.01"
 #define DRIVER_AUTHOR "Matthias Bruestle"
 #define DRIVER_DESC "REINER SCT cyberJack pinpad/e-com USB Chipcard Reader Driver"
 
@@ -441,5 +437,4 @@ module_usb_serial_driver(serial_drivers, id_table);
 
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_VERSION(DRIVER_VERSION);
 MODULE_LICENSE("GPL");
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index f0da1279c114..fd8c35fd452e 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -50,10 +50,6 @@ static bool stats;
 static int interval;
 static bool unstable_bauds;
 
-/*
- * Version Information
- */
-#define DRIVER_VERSION "v1.10"
 #define DRIVER_AUTHOR "Lonnie Mendez <dignome@gmail.com>, Neil Whelchel <koyama@firstlight.net>"
 #define DRIVER_DESC "Cypress USB to Serial Driver"
 
@@ -1303,7 +1299,6 @@ module_usb_serial_driver(serial_drivers, id_table_combined);
 
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_VERSION(DRIVER_VERSION);
 MODULE_LICENSE("GPL");
 
 module_param(stats, bool, S_IRUGO | S_IWUSR);
diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c
index b50fa1c6d885..45d4af62967f 100644
--- a/drivers/usb/serial/digi_acceleport.c
+++ b/drivers/usb/serial/digi_acceleport.c
@@ -32,10 +32,6 @@
 
 /* Defines */
 
-/*
- * Version Information
- */
-#define DRIVER_VERSION "v1.80.1.2"
 #define DRIVER_AUTHOR "Peter Berger <pberger@brimson.com>, Al Borchers <borchers@steinerpoint.com>"
 #define DRIVER_DESC "Digi AccelePort USB-2/USB-4 Serial Converter driver"
 
diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c
index 43ede4a1e12c..0f658618db13 100644
--- a/drivers/usb/serial/empeg.c
+++ b/drivers/usb/serial/empeg.c
@@ -28,10 +28,6 @@
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
 
-/*
- * Version Information
- */
-#define DRIVER_VERSION "v1.3"
 #define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>, Gary Brubaker <xavyer@ix.netcom.com>"
 #define DRIVER_DESC "USB Empeg Mark I/II Driver"
 
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index be845873e23d..ba68835d06a6 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -73,7 +73,6 @@ struct ftdi_private {
         char prev_status;        /* Used for TIOCMIWAIT */
         bool dev_gone;        /* Used to abort TIOCMIWAIT */
         char transmit_empty;    /* If transmitter is empty or not */
-        struct usb_serial_port *port;
         __u16 interface;        /* FT2232C, FT2232H or FT4232H port interface
                                    (0 for FT232/245) */
 
@@ -192,6 +191,7 @@ static struct usb_device_id id_table_combined [] = {
         { USB_DEVICE(FTDI_VID, FTDI_OPENDCC_THROTTLE_PID) },
         { USB_DEVICE(FTDI_VID, FTDI_OPENDCC_GATEWAY_PID) },
         { USB_DEVICE(FTDI_VID, FTDI_OPENDCC_GBM_PID) },
+        { USB_DEVICE(NEWPORT_VID, NEWPORT_AGILIS_PID) },
         { USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_IOBOARD_PID) },
         { USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_MINI_IOBOARD_PID) },
         { USB_DEVICE(FTDI_VID, FTDI_SPROG_II) },
@@ -875,6 +875,8 @@ static struct usb_device_id id_table_combined [] = {
         { USB_DEVICE(FTDI_VID, FTDI_DISTORTEC_JTAG_LOCK_PICK_PID),
                 .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
         { USB_DEVICE(FTDI_VID, FTDI_LUMEL_PD12_PID) },
+        /* Crucible Devices */
+        { USB_DEVICE(FTDI_VID, FTDI_CT_COMET_PID) },
         { },                                    /* Optional parameter entry */
         { }                                     /* Terminating entry */
 };
@@ -923,6 +925,9 @@ static int ftdi_get_icount(struct tty_struct *tty,
 static int  ftdi_ioctl(struct tty_struct *tty,
                         unsigned int cmd, unsigned long arg);
 static void ftdi_break_ctl(struct tty_struct *tty, int break_state);
+static int ftdi_chars_in_buffer(struct tty_struct *tty);
+static int ftdi_get_modem_status(struct tty_struct *tty,
+                                                unsigned char status[2]);
 
 static unsigned short int ftdi_232am_baud_base_to_divisor(int baud, int base);
 static unsigned short int ftdi_232am_baud_to_divisor(int baud);
@@ -957,6 +962,7 @@ static struct usb_serial_driver ftdi_sio_device = {
         .ioctl =                ftdi_ioctl,
         .set_termios =          ftdi_set_termios,
         .break_ctl =            ftdi_break_ctl,
+        .chars_in_buffer =      ftdi_chars_in_buffer,
 };
 
 static struct usb_serial_driver * const serial_drivers[] = {
@@ -1090,6 +1096,7 @@ static int update_mctrl(struct usb_serial_port *port, unsigned int set,
                         __func__,
                         (set & TIOCM_DTR) ? "HIGH" : (clear & TIOCM_DTR) ? "LOW" : "unchanged",
                         (set & TIOCM_RTS) ? "HIGH" : (clear & TIOCM_RTS) ? "LOW" : "unchanged");
+                rv = usb_translate_errors(rv);
         } else {
                 dev_dbg(dev, "%s - DTR %s, RTS %s\n", __func__,
                         (set & TIOCM_DTR) ? "HIGH" : (clear & TIOCM_DTR) ? "LOW" : "unchanged",
@@ -1682,7 +1689,6 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port)
 
         kref_init(&priv->kref);
         mutex_init(&priv->cfg_lock);
-        memset(&priv->icount, 0x00, sizeof(priv->icount));
         init_waitqueue_head(&priv->delta_msr_wait);
 
         priv->flags = ASYNC_LOW_LATENCY;
@@ -1691,7 +1697,6 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port)
         if (quirk && quirk->port_probe)
                 quirk->port_probe(priv);
 
-        priv->port = port;
         usb_set_serial_port_data(port, priv);
 
         ftdi_determine_type(port);
@@ -1781,7 +1786,7 @@ static int ftdi_8u2232c_probe(struct usb_serial *serial)
         struct usb_device *udev = serial->dev;
 
         if ((udev->manufacturer && !strcmp(udev->manufacturer, "CALAO Systems")) ||
-            (udev->product && !strcmp(udev->product, "BeagleBone/XDS100")))
+            (udev->product && !strcmp(udev->product, "BeagleBone/XDS100V2")))
                 return ftdi_jtag_probe(serial);
 
         return 0;
@@ -2089,6 +2094,29 @@ static void ftdi_break_ctl(struct tty_struct *tty, int break_state)
 
 }
 
+static int ftdi_chars_in_buffer(struct tty_struct *tty)
+{
+        struct usb_serial_port *port = tty->driver_data;
+        int chars;
+        unsigned char buf[2];
+        int ret;
+
+        chars = usb_serial_generic_chars_in_buffer(tty);
+        if (chars)
+                goto out;
+
+        /* Check if hardware buffer is empty. */
+        ret = ftdi_get_modem_status(tty, buf);
+        if (ret == 2) {
+                if (!(buf[1] & FTDI_RS_TEMT))
+                        chars = 1;
+        }
+out:
+        dev_dbg(&port->dev, "%s - %d\n", __func__, chars);
+
+        return chars;
+}
+
 /* old_termios contains the original termios settings and tty->termios contains
  * the new setting to be used
  * WARNING: set_termios calls this with old_termios in kernel space
@@ -2272,7 +2300,14 @@ no_c_cflag_changes:
         }
 }
 
-static int ftdi_tiocmget(struct tty_struct *tty)
+/*
+ * Get modem-control status.
+ *
+ * Returns the number of status bytes retrieved (device dependant), or
+ * negative error code.
+ */
+static int ftdi_get_modem_status(struct tty_struct *tty,
+                                                unsigned char status[2])
 {
         struct usb_serial_port *port = tty->driver_data;
         struct ftdi_private *priv = usb_get_serial_port_data(port);
@@ -2312,16 +2347,43 @@ static int ftdi_tiocmget(struct tty_struct *tty)
                         FTDI_SIO_GET_MODEM_STATUS_REQUEST_TYPE,
                         0, priv->interface,
                         buf, len, WDR_TIMEOUT);
-        if (ret < 0)
+        if (ret < 0) {
+                dev_err(&port->dev, "failed to get modem status: %d\n", ret);
+                ret = usb_translate_errors(ret);
                 goto out;
+        }
 
-        ret = (buf[0] & FTDI_SIO_DSR_MASK ? TIOCM_DSR : 0) |
-                (buf[0] & FTDI_SIO_CTS_MASK ? TIOCM_CTS : 0) |
-                (buf[0]  & FTDI_SIO_RI_MASK  ? TIOCM_RI  : 0) |
-                (buf[0]  & FTDI_SIO_RLSD_MASK ? TIOCM_CD  : 0) |
-                priv->last_dtr_rts;
+        status[0] = buf[0];
+        if (ret > 1)
+                status[1] = buf[1];
+        else
+                status[1] = 0;
+
+        dev_dbg(&port->dev, "%s - 0x%02x%02x\n", __func__, status[0],
+                                                                status[1]);
 out:
         kfree(buf);
+
+        return ret;
+}
+
+static int ftdi_tiocmget(struct tty_struct *tty)
+{
+        struct usb_serial_port *port = tty->driver_data;
+        struct ftdi_private *priv = usb_get_serial_port_data(port);
+        unsigned char buf[2];
+        int ret;
+
+        ret = ftdi_get_modem_status(tty, buf);
+        if (ret < 0)
+                return ret;
+
+        ret =   (buf[0] & FTDI_SIO_DSR_MASK  ? TIOCM_DSR : 0) |
+                (buf[0] & FTDI_SIO_CTS_MASK  ? TIOCM_CTS : 0) |
+                (buf[0] & FTDI_SIO_RI_MASK   ? TIOCM_RI  : 0) |
+                (buf[0] & FTDI_SIO_RLSD_MASK ? TIOCM_CD  : 0) |
+                priv->last_dtr_rts;
+
         return ret;
 }
 
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index 57c12ef6625e..fa5d56038276 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -752,6 +752,12 @@
 #define TTI_VID                 0x103E  /* Vendor Id */
 #define TTI_QL355P_PID          0x03E8  /* TTi QL355P power supply */
 
+/*
+ * Newport Cooperation (www.newport.com)
+ */
+#define NEWPORT_VID                     0x104D
+#define NEWPORT_AGILIS_PID              0x3000
+
 /* Interbiometrics USB I/O Board */
 /* Developed for Interbiometrics by Rudolf Gugler */
 #define INTERBIOMETRICS_VID              0x1209
@@ -1253,3 +1259,9 @@
  * ATI command output: Cinterion MC55i
  */
 #define FTDI_CINTERION_MC55I_PID        0xA951
+
+/*
+ * Product: Comet Caller ID decoder
+ * Manufacturer: Crucible Technologies
+ */
+#define FTDI_CT_COMET_PID       0x8e08
diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c
index 296612153ea2..2ea70a631996 100644
--- a/drivers/usb/serial/generic.c
+++ b/drivers/usb/serial/generic.c
@@ -262,6 +262,7 @@ int usb_serial_generic_chars_in_buffer(struct tty_struct *tty)
         dev_dbg(&port->dev, "%s - returns %d\n", __func__, chars);
         return chars;
 }
+EXPORT_SYMBOL_GPL(usb_serial_generic_chars_in_buffer);
 
 static int usb_serial_generic_submit_read_urb(struct usb_serial_port *port,
                                                 int index, gfp_t mem_flags)
diff --git a/drivers/usb/serial/hp4x.c b/drivers/usb/serial/hp4x.c
index 0bbaf21a9d1e..2cba60d90c79 100644
--- a/drivers/usb/serial/hp4x.c
+++ b/drivers/usb/serial/hp4x.c
@@ -20,10 +20,6 @@
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
 
-/*
- * Version Information
- */
-#define DRIVER_VERSION "v1.00"
 #define DRIVER_DESC "HP4x (48/49) Generic Serial driver"
 
 #define HP_VENDOR_ID 0x03f0
@@ -52,5 +48,4 @@ static struct usb_serial_driver * const serial_drivers[] = {
 module_usb_serial_driver(serial_drivers, id_table);
 
 MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_VERSION(DRIVER_VERSION);
 MODULE_LICENSE("GPL");
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index 5acc0d13864a..7b770c7f8b11 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -51,10 +51,6 @@
 #include "io_ionsp.h"           /* info for the iosp messages */
 #include "io_16654.h"           /* 16654 UART defines */
 
-/*
- * Version Information
- */
-#define DRIVER_VERSION "v2.7"
 #define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com> and David Iacovelli"
 #define DRIVER_DESC "Edgeport USB Serial Driver"
 
diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
index 60023c2d2a31..58184f3de686 100644
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -40,10 +40,6 @@
 #include "io_usbvend.h"
 #include "io_ti.h"
 
-/*
- * Version Information
- */
-#define DRIVER_VERSION "v0.7mode043006"
 #define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com> and David Iacovelli"
 #define DRIVER_DESC "Edgeport USB Serial Driver"
 
diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c
index 1068bf22e27e..76c9a847da5d 100644
--- a/drivers/usb/serial/ipaq.c
+++ b/drivers/usb/serial/ipaq.c
@@ -25,11 +25,6 @@
 
 #define KP_RETRIES      100
 
-/*
- * Version Information
- */
-
-#define DRIVER_VERSION "v1.0"
 #define DRIVER_AUTHOR "Ganesh Varadarajan <ganesh@veritas.com>"
 #define DRIVER_DESC "USB PocketPC PDA driver"
 
diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c
index 4264821a3b34..155eab14b30e 100644
--- a/drivers/usb/serial/ipw.c
+++ b/drivers/usb/serial/ipw.c
@@ -49,10 +49,6 @@
 #include <linux/uaccess.h>
 #include "usb-wwan.h"
 
-/*
- * Version Information
- */
-#define DRIVER_VERSION  "v0.4"
 #define DRIVER_AUTHOR   "Roelf Diedericks"
 #define DRIVER_DESC     "IPWireless tty driver"
 
diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c
index cd5533e81de7..1e1fbed65ef2 100644
--- a/drivers/usb/serial/iuu_phoenix.c
+++ b/drivers/usb/serial/iuu_phoenix.c
@@ -32,10 +32,6 @@
 #include "iuu_phoenix.h"
 #include <linux/random.h>
 
-/*
- * Version Information
- */
-#define DRIVER_VERSION "v0.12"
 #define DRIVER_DESC "Infinity USB Unlimited Phoenix driver"
 
 static const struct usb_device_id id_table[] = {
@@ -1164,7 +1160,7 @@ static ssize_t store_vcc_mode(struct device *dev,
         struct iuu_private *priv = usb_get_serial_port_data(port);
         unsigned long v;
 
-        if (strict_strtoul(buf, 10, &v)) {
+        if (kstrtoul(buf, 10, &v)) {
                 dev_err(dev, "%s - vcc_mode: %s is not a unsigned long\n",
                                 __func__, buf);
                 goto fail_store_vcc_mode;
@@ -1232,8 +1228,6 @@ MODULE_AUTHOR("Alain Degreffe eczema@ecze.com");
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_LICENSE("GPL");
 
-MODULE_VERSION(DRIVER_VERSION);
-
 module_param(xmas, bool, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(xmas, "Xmas colors enabled or not");
 
diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c
index cff8dd5b462d..97bc49f68efd 100644
--- a/drivers/usb/serial/keyspan.c
+++ b/drivers/usb/serial/keyspan.c
@@ -44,10 +44,6 @@
 #include <linux/usb/ezusb.h>
 #include "keyspan.h"
 
-/*
- * Version Information
- */
-#define DRIVER_VERSION "v1.1.5"
 #define DRIVER_AUTHOR "Hugh Blemings <hugh@misc.nu"
 #define DRIVER_DESC "Keyspan USB to Serial Converter Driver"
 
diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c
index bb87e29c4ac2..41b01092af07 100644
--- a/drivers/usb/serial/keyspan_pda.c
+++ b/drivers/usb/serial/keyspan_pda.c
@@ -42,10 +42,6 @@
         #undef XIRCOM
 #endif
 
-/*
- * Version Information
- */
-#define DRIVER_VERSION "v1.1"
 #define DRIVER_AUTHOR "Brian Warner <warner@lothar.com>"
 #define DRIVER_DESC "USB Keyspan PDA Converter driver"
 
diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c
index 1f4517864cd2..fc9e14a1e9b3 100644
--- a/drivers/usb/serial/kl5kusb105.c
+++ b/drivers/usb/serial/kl5kusb105.c
@@ -49,10 +49,6 @@
 #include <linux/usb/serial.h>
 #include "kl5kusb105.h"
 
-/*
- * Version Information
- */
-#define DRIVER_VERSION "v0.4"
 #define DRIVER_AUTHOR "Utz-Uwe Haus <haus@uuhaus.de>, Johan Hovold <jhovold@gmail.com>"
 #define DRIVER_DESC "KLSI KL5KUSB105 chipset USB->Serial Converter driver"
 
diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c
index c9ca7a5b12e0..b747ba615d0b 100644
--- a/drivers/usb/serial/kobil_sct.c
+++ b/drivers/usb/serial/kobil_sct.c
@@ -38,8 +38,6 @@
 #include <linux/ioctl.h>
 #include "kobil_sct.h"
 
-/* Version Information */
-#define DRIVER_VERSION "21/05/2004"
 #define DRIVER_AUTHOR "KOBIL Systems GmbH - http://www.kobil.com"
 #define DRIVER_DESC "KOBIL USB Smart Card Terminal Driver (experimental)"
 
diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c
index 8a2081004107..b6911757c855 100644
--- a/drivers/usb/serial/mct_u232.c
+++ b/drivers/usb/serial/mct_u232.c
@@ -38,10 +38,6 @@
 #include <linux/ioctl.h>
 #include "mct_u232.h"
 
-/*
- * Version Information
- */
-#define DRIVER_VERSION "z2.1"           /* Linux in-kernel version */
 #define DRIVER_AUTHOR "Wolfgang Grandegger <wolfgang@ces.ch>"
 #define DRIVER_DESC "Magic Control Technology USB-RS232 converter driver"
 
diff --git a/drivers/usb/serial/metro-usb.c b/drivers/usb/serial/metro-usb.c
index 6f29c74eb769..3d258448c29a 100644
--- a/drivers/usb/serial/metro-usb.c
+++ b/drivers/usb/serial/metro-usb.c
@@ -20,8 +20,6 @@
 #include <linux/uaccess.h>
 #include <linux/usb/serial.h>
 
-/* Version Information */
-#define DRIVER_VERSION "v1.2.0.0"
 #define DRIVER_DESC "Metrologic Instruments Inc. - USB-POS driver"
 
 /* Product information. */
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index 75267421aad8..f57a6b1fe787 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -36,10 +36,6 @@
 #include <linux/uaccess.h>
 #include <linux/parport.h>
 
-/*
- * Version Information
- */
-#define DRIVER_VERSION "2.1"
 #define DRIVER_AUTHOR "Aspire Communications pvt Ltd."
 #define DRIVER_DESC "Moschip USB Serial Driver"
 
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 1cf3375ec1af..66d9e088d9d9 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -35,10 +35,6 @@
 #include <linux/usb/serial.h>
 #include <linux/uaccess.h>
 
-/*
- * Version Information
- */
-#define DRIVER_VERSION "1.3.2"
 #define DRIVER_DESC "Moschip 7840/7820 USB Serial Driver"
 
 /*
diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c
index 9ab73d295774..7818af931a48 100644
--- a/drivers/usb/serial/omninet.c
+++ b/drivers/usb/serial/omninet.c
@@ -23,10 +23,6 @@
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
 
-/*
- * Version Information
- */
-#define DRIVER_VERSION "v1.1"
 #define DRIVER_AUTHOR "Alessandro Zummo"
 #define DRIVER_DESC "USB ZyXEL omni.net LCD PLUS Driver"
 
diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c
index 6aba731d4864..c6bfb83efb1e 100644
--- a/drivers/usb/serial/opticon.c
+++ b/drivers/usb/serial/opticon.c
@@ -1,6 +1,7 @@
 /*
  * Opticon USB barcode to serial driver
  *
+ * Copyright (C) 2011 - 2012 Johan Hovold <jhovold@gmail.com>
  * Copyright (C) 2011 Martin Jansen <martin.jansen@opticon.com>
  * Copyright (C) 2008 - 2009 Greg Kroah-Hartman <gregkh@suse.de>
  * Copyright (C) 2008 - 2009 Novell Inc.
@@ -40,114 +41,70 @@ MODULE_DEVICE_TABLE(usb, id_table);
 
 /* This structure holds all of the individual device information */
 struct opticon_private {
-        struct usb_device *udev;
-        struct usb_serial *serial;
-        struct usb_serial_port *port;
-        unsigned char *bulk_in_buffer;
-        struct urb *bulk_read_urb;
-        int buffer_size;
-        u8 bulk_address;
         spinlock_t lock;        /* protects the following flags */
-        bool throttled;
-        bool actually_throttled;
         bool rts;
         bool cts;
         int outstanding_urbs;
 };
 
 
-
-static void opticon_read_bulk_callback(struct urb *urb)
+static void opticon_process_data_packet(struct usb_serial_port *port,
+                                        const unsigned char *buf, size_t len)
 {
-        struct opticon_private *priv = urb->context;
-        unsigned char *data = urb->transfer_buffer;
-        struct usb_serial_port *port = priv->port;
-        int status = urb->status;
         struct tty_struct *tty;
-        int result;
-        int data_length;
+
+        tty = tty_port_tty_get(&port->port);
+        if (!tty)
+                return;
+
+        tty_insert_flip_string(tty, buf, len);
+        tty_flip_buffer_push(tty);
+        tty_kref_put(tty);
+}
+
+static void opticon_process_status_packet(struct usb_serial_port *port,
+                                        const unsigned char *buf, size_t len)
+{
+        struct opticon_private *priv = usb_get_serial_port_data(port);
         unsigned long flags;
 
-        switch (status) {
-        case 0:
-                /* success */
-                break;
-        case -ECONNRESET:
-        case -ENOENT:
-        case -ESHUTDOWN:
-                /* this urb is terminated, clean up */
-                dev_dbg(&priv->udev->dev, "%s - urb shutting down with status: %d\n",
-                        __func__, status);
+        spin_lock_irqsave(&priv->lock, flags);
+        if (buf[0] == 0x00)
+                priv->cts = false;
+        else
+                priv->cts = true;
+        spin_unlock_irqrestore(&priv->lock, flags);
+}
+
+static void opticon_process_read_urb(struct urb *urb)
+{
+        struct usb_serial_port *port = urb->context;
+        const unsigned char *hdr = urb->transfer_buffer;
+        const unsigned char *data = hdr + 2;
+        size_t data_len = urb->actual_length - 2;
+
+        if (urb->actual_length <= 2) {
+                dev_dbg(&port->dev, "malformed packet received: %d bytes\n",
+                                                        urb->actual_length);
                 return;
-        default:
-                dev_dbg(&priv->udev->dev, "%s - nonzero urb status received: %d\n",
-                        __func__, status);
-                goto exit;
         }
-
-        usb_serial_debug_data(&port->dev, __func__, urb->actual_length, data);
-
-        if (urb->actual_length > 2) {
-                data_length = urb->actual_length - 2;
-
-                /*
-                 * Data from the device comes with a 2 byte header:
-                 *
-                 * <0x00><0x00>data...
-                 *      This is real data to be sent to the tty layer
-                 * <0x00><0x01)level
-                 *      This is a CTS level change, the third byte is the CTS
-                 *      value (0 for low, 1 for high).
-                 */
-                if ((data[0] == 0x00) && (data[1] == 0x00)) {
-                        /* real data, send it to the tty layer */
-                        tty = tty_port_tty_get(&port->port);
-                        if (tty) {
-                                tty_insert_flip_string(tty, data + 2,
-                                                       data_length);
-                                tty_flip_buffer_push(tty);
-                                tty_kref_put(tty);
-                        }
-                } else {
-                        if ((data[0] == 0x00) && (data[1] == 0x01)) {
-                                spin_lock_irqsave(&priv->lock, flags);
-                                /* CTS status information package */
-                                if (data[2] == 0x00)
-                                        priv->cts = false;
-                                else
-                                        priv->cts = true;
-                                spin_unlock_irqrestore(&priv->lock, flags);
-                        } else {
-                                dev_dbg(&priv->udev->dev,
-                                        "Unknown data packet received from the device:"
-                                        " %2x %2x\n",
-                                        data[0], data[1]);
-                        }
-                }
+        /*
+         * Data from the device comes with a 2 byte header:
+         *
+         * <0x00><0x00>data...
+         *      This is real data to be sent to the tty layer
+         * <0x00><0x01>level
+         *      This is a CTS level change, the third byte is the CTS
+         *      value (0 for low, 1 for high).
+         */
+        if ((hdr[0] == 0x00) && (hdr[1] == 0x00)) {
+                opticon_process_data_packet(port, data, data_len);
+        } else if ((hdr[0] == 0x00) && (hdr[1] == 0x01)) {
+                opticon_process_status_packet(port, data, data_len);
         } else {
-                dev_dbg(&priv->udev->dev,
-                        "Improper amount of data received from the device, "
-                        "%d bytes", urb->actual_length);
+                dev_dbg(&port->dev, "unknown packet received: %02x %02x\n",
+                                                        hdr[0], hdr[1]);
         }
-
-exit:
-        spin_lock(&priv->lock);
-
-        /* Continue trying to always read if we should */
-        if (!priv->throttled) {
-                usb_fill_bulk_urb(priv->bulk_read_urb, priv->udev,
-                                  usb_rcvbulkpipe(priv->udev,
-                                                  priv->bulk_address),
-                                  priv->bulk_in_buffer, priv->buffer_size,
-                                  opticon_read_bulk_callback, priv);
-                result = usb_submit_urb(priv->bulk_read_urb, GFP_ATOMIC);
-                if (result)
-                        dev_err(&port->dev,
-                            "%s - failed resubmitting read urb, error %d\n",
-                                                        __func__, result);
-        } else
-                priv->actually_throttled = true;
-        spin_unlock(&priv->lock);
 }
 
 static int send_control_msg(struct usb_serial_port *port, u8 requesttype,
@@ -175,52 +132,35 @@ static int send_control_msg(struct usb_serial_port *port, u8 requesttype,
 
 static int opticon_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
-        struct opticon_private *priv = usb_get_serial_data(port->serial);
+        struct opticon_private *priv = usb_get_serial_port_data(port);
         unsigned long flags;
-        int result = 0;
+        int res;
 
         spin_lock_irqsave(&priv->lock, flags);
-        priv->throttled = false;
-        priv->actually_throttled = false;
-        priv->port = port;
         priv->rts = false;
         spin_unlock_irqrestore(&priv->lock, flags);
 
         /* Clear RTS line */
         send_control_msg(port, CONTROL_RTS, 0);
 
-        /* Setup the read URB and start reading from the device */
-        usb_fill_bulk_urb(priv->bulk_read_urb, priv->udev,
-                          usb_rcvbulkpipe(priv->udev,
-                                          priv->bulk_address),
-                          priv->bulk_in_buffer, priv->buffer_size,
-                          opticon_read_bulk_callback, priv);
-
         /* clear the halt status of the enpoint */
-        usb_clear_halt(priv->udev, priv->bulk_read_urb->pipe);
+        usb_clear_halt(port->serial->dev, port->read_urb->pipe);
+
+        res = usb_serial_generic_open(tty, port);
+        if (!res)
+                return res;
 
-        result = usb_submit_urb(priv->bulk_read_urb, GFP_KERNEL);
-        if (result)
-                dev_err(&port->dev,
-                        "%s - failed resubmitting read urb, error %d\n",
-                        __func__, result);
         /* Request CTS line state, sometimes during opening the current
          * CTS state can be missed. */
         send_control_msg(port, RESEND_CTS_STATE, 1);
-        return result;
-}
-
-static void opticon_close(struct usb_serial_port *port)
-{
-        struct opticon_private *priv = usb_get_serial_data(port->serial);
 
-        /* shutdown our urbs */
-        usb_kill_urb(priv->bulk_read_urb);
+        return res;
 }
 
 static void opticon_write_control_callback(struct urb *urb)
 {
-        struct opticon_private *priv = urb->context;
+        struct usb_serial_port *port = urb->context;
+        struct opticon_private *priv = usb_get_serial_port_data(port);
         int status = urb->status;
         unsigned long flags;
 
@@ -231,20 +171,21 @@ static void opticon_write_control_callback(struct urb *urb)
         kfree(urb->setup_packet);
 
         if (status)
-                dev_dbg(&priv->udev->dev, "%s - nonzero write bulk status received: %d\n",
+                dev_dbg(&port->dev,
+                        "%s - non-zero urb status received: %d\n",
                         __func__, status);
 
         spin_lock_irqsave(&priv->lock, flags);
         --priv->outstanding_urbs;
         spin_unlock_irqrestore(&priv->lock, flags);
 
-        usb_serial_port_softint(priv->port);
+        usb_serial_port_softint(port);
 }
 
 static int opticon_write(struct tty_struct *tty, struct usb_serial_port *port,
                          const unsigned char *buf, int count)
 {
-        struct opticon_private *priv = usb_get_serial_data(port->serial);
+        struct opticon_private *priv = usb_get_serial_port_data(port);
         struct usb_serial *serial = port->serial;
         struct urb *urb;
         unsigned char *buffer;
@@ -298,7 +239,7 @@ static int opticon_write(struct tty_struct *tty, struct usb_serial_port *port,
         usb_fill_control_urb(urb, serial->dev,
                 usb_sndctrlpipe(serial->dev, 0),
                 (unsigned char *)dr, buffer, count,
-                opticon_write_control_callback, priv);
+                opticon_write_control_callback, port);
 
         /* send it down the pipe */
         status = usb_submit_urb(urb, GFP_ATOMIC);
@@ -331,7 +272,7 @@ error_no_buffer:
 static int opticon_write_room(struct tty_struct *tty)
 {
         struct usb_serial_port *port = tty->driver_data;
-        struct opticon_private *priv = usb_get_serial_data(port->serial);
+        struct opticon_private *priv = usb_get_serial_port_data(port);
         unsigned long flags;
 
         /*
@@ -350,44 +291,10 @@ static int opticon_write_room(struct tty_struct *tty)
         return 2048;
 }
 
-static void opticon_throttle(struct tty_struct *tty)
-{
-        struct usb_serial_port *port = tty->driver_data;
-        struct opticon_private *priv = usb_get_serial_data(port->serial);
-        unsigned long flags;
-
-        spin_lock_irqsave(&priv->lock, flags);
-        priv->throttled = true;
-        spin_unlock_irqrestore(&priv->lock, flags);
-}
-
-
-static void opticon_unthrottle(struct tty_struct *tty)
-{
-        struct usb_serial_port *port = tty->driver_data;
-        struct opticon_private *priv = usb_get_serial_data(port->serial);
-        unsigned long flags;
-        int result, was_throttled;
-
-        spin_lock_irqsave(&priv->lock, flags);
-        priv->throttled = false;
-        was_throttled = priv->actually_throttled;
-        priv->actually_throttled = false;
-        spin_unlock_irqrestore(&priv->lock, flags);
-
-        if (was_throttled) {
-                result = usb_submit_urb(priv->bulk_read_urb, GFP_ATOMIC);
-                if (result)
-                        dev_err(&port->dev,
-                                "%s - failed submitting read urb, error %d\n",
-                                                        __func__, result);
-        }
-}
-
 static int opticon_tiocmget(struct tty_struct *tty)
 {
         struct usb_serial_port *port = tty->driver_data;
-        struct opticon_private *priv = usb_get_serial_data(port->serial);
+        struct opticon_private *priv = usb_get_serial_port_data(port);
         unsigned long flags;
         int result = 0;
 
@@ -407,7 +314,7 @@ static int opticon_tiocmset(struct tty_struct *tty,
 {
         struct usb_serial_port *port = tty->driver_data;
         struct usb_serial *serial = port->serial;
-        struct opticon_private *priv = usb_get_serial_data(port->serial);
+        struct opticon_private *priv = usb_get_serial_port_data(port);
         unsigned long flags;
         bool rts;
         bool changed = false;
@@ -438,7 +345,7 @@ static int opticon_tiocmset(struct tty_struct *tty,
         return ret;
 }
 
-static int get_serial_info(struct opticon_private *priv,
+static int get_serial_info(struct usb_serial_port *port,
                            struct serial_struct __user *serial)
 {
         struct serial_struct tmp;
@@ -450,7 +357,7 @@ static int get_serial_info(struct opticon_private *priv,
 
         /* fake emulate a 16550 uart to make userspace code happy */
         tmp.type                = PORT_16550A;
-        tmp.line                = priv->serial->minor;
+        tmp.line                = port->serial->minor;
         tmp.port                = 0;
         tmp.irq                 = 0;
         tmp.flags               = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ;
@@ -468,13 +375,12 @@ static int opticon_ioctl(struct tty_struct *tty,
                          unsigned int cmd, unsigned long arg)
 {
         struct usb_serial_port *port = tty->driver_data;
-        struct opticon_private *priv = usb_get_serial_data(port->serial);
 
         dev_dbg(&port->dev, "%s - port %d, cmd = 0x%x\n", __func__, port->number, cmd);
 
         switch (cmd) {
         case TIOCGSERIAL:
-                return get_serial_info(priv,
+                return get_serial_info(port,
                                        (struct serial_struct __user *)arg);
         }
 
@@ -483,106 +389,36 @@ static int opticon_ioctl(struct tty_struct *tty,
 
 static int opticon_startup(struct usb_serial *serial)
 {
-        struct opticon_private *priv;
-        struct usb_host_interface *intf;
-        int i;
-        int retval = -ENOMEM;
-        bool bulk_in_found = false;
-
-        /* create our private serial structure */
-        priv = kzalloc(sizeof(*priv), GFP_KERNEL);
-        if (priv == NULL) {
-                dev_err(&serial->dev->dev, "%s - Out of memory\n", __func__);
-                return -ENOMEM;
-        }
-        spin_lock_init(&priv->lock);
-        priv->serial = serial;
-        priv->port = serial->port[0];
-        priv->udev = serial->dev;
-        priv->outstanding_urbs = 0;     /* Init the outstanding urbs */
-
-        /* find our bulk endpoint */
-        intf = serial->interface->altsetting;
-        for (i = 0; i < intf->desc.bNumEndpoints; ++i) {
-                struct usb_endpoint_descriptor *endpoint;
-
-                endpoint = &intf->endpoint[i].desc;
-                if (!usb_endpoint_is_bulk_in(endpoint))
-                        continue;
-
-                priv->bulk_read_urb = usb_alloc_urb(0, GFP_KERNEL);
-                if (!priv->bulk_read_urb) {
-                        dev_err(&priv->udev->dev, "out of memory\n");
-                        goto error;
-                }
-
-                priv->buffer_size = usb_endpoint_maxp(endpoint) * 2;
-                priv->bulk_in_buffer = kmalloc(priv->buffer_size, GFP_KERNEL);
-                if (!priv->bulk_in_buffer) {
-                        dev_err(&priv->udev->dev, "out of memory\n");
-                        goto error;
-                }
-
-                priv->bulk_address = endpoint->bEndpointAddress;
-
-                bulk_in_found = true;
-                break;
-                }
-
-        if (!bulk_in_found) {
-                dev_err(&priv->udev->dev,
-                        "Error - the proper endpoints were not found!\n");
-                goto error;
+        if (!serial->num_bulk_in) {
+                dev_err(&serial->dev->dev, "no bulk in endpoint\n");
+                return -ENODEV;
         }
 
-        usb_set_serial_data(serial, priv);
         return 0;
-
-error:
-        usb_free_urb(priv->bulk_read_urb);
-        kfree(priv->bulk_in_buffer);
-        kfree(priv);
-        return retval;
 }
 
-static void opticon_disconnect(struct usb_serial *serial)
+static int opticon_port_probe(struct usb_serial_port *port)
 {
-        struct opticon_private *priv = usb_get_serial_data(serial);
-
-        usb_kill_urb(priv->bulk_read_urb);
-        usb_free_urb(priv->bulk_read_urb);
-}
+        struct opticon_private *priv;
 
-static void opticon_release(struct usb_serial *serial)
-{
-        struct opticon_private *priv = usb_get_serial_data(serial);
+        priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+        if (!priv)
+                return -ENOMEM;
 
-        kfree(priv->bulk_in_buffer);
-        kfree(priv);
-}
+        spin_lock_init(&priv->lock);
 
-static int opticon_suspend(struct usb_serial *serial, pm_message_t message)
-{
-        struct opticon_private *priv = usb_get_serial_data(serial);
+        usb_set_serial_port_data(port, priv);
 
-        usb_kill_urb(priv->bulk_read_urb);
         return 0;
 }
 
-static int opticon_resume(struct usb_serial *serial)
+static int opticon_port_remove(struct usb_serial_port *port)
 {
-        struct opticon_private *priv = usb_get_serial_data(serial);
-        struct usb_serial_port *port = serial->port[0];
-        int result;
-
-        mutex_lock(&port->port.mutex);
-        /* This is protected by the port mutex against close/open */
-        if (test_bit(ASYNCB_INITIALIZED, &port->port.flags))
-                result = usb_submit_urb(priv->bulk_read_urb, GFP_NOIO);
-        else
-                result = 0;
-        mutex_unlock(&port->port.mutex);
-        return result;
+        struct opticon_private *priv = usb_get_serial_port_data(port);
+
+        kfree(priv);
+
+        return 0;
 }
 
 static struct usb_serial_driver opticon_device = {
@@ -592,20 +428,19 @@ static struct usb_serial_driver opticon_device = {
         },
         .id_table =             id_table,
         .num_ports =            1,
+        .bulk_in_size =         256,
         .attach =               opticon_startup,
+        .port_probe =           opticon_port_probe,
+        .port_remove =          opticon_port_remove,
         .open =                 opticon_open,
-        .close =                opticon_close,
         .write =                opticon_write,
         .write_room =           opticon_write_room,
-        .disconnect =           opticon_disconnect,
-        .release =              opticon_release,
-        .throttle =             opticon_throttle,
-        .unthrottle =           opticon_unthrottle,
+        .throttle =             usb_serial_generic_throttle,
+        .unthrottle =           usb_serial_generic_unthrottle,
         .ioctl =                opticon_ioctl,
         .tiocmget =             opticon_tiocmget,
         .tiocmset =             opticon_tiocmset,
-        .suspend =              opticon_suspend,
-        .resume =               opticon_resume,
+        .process_read_urb =     opticon_process_read_urb,
 };
 
 static struct usb_serial_driver * const serial_drivers[] = {
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index edc64bb6f457..478adcfcdf26 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -28,7 +28,6 @@
   device features.
 */
 
-#define DRIVER_VERSION "v0.7.2"
 #define DRIVER_AUTHOR "Matthias Urlichs <smurf@smurf.noris.de>"
 #define DRIVER_DESC "USB Driver for GSM modems"
 
@@ -81,6 +80,7 @@ static void option_instat_callback(struct urb *urb);
 #define OPTION_PRODUCT_GTM380_MODEM             0x7201
 
 #define HUAWEI_VENDOR_ID                        0x12D1
+#define HUAWEI_PRODUCT_E173                     0x140C
 #define HUAWEI_PRODUCT_K4505                    0x1464
 #define HUAWEI_PRODUCT_K3765                    0x1465
 #define HUAWEI_PRODUCT_K4605                    0x14C6
@@ -288,6 +288,7 @@ static void option_instat_callback(struct urb *urb);
 #define ALCATEL_VENDOR_ID                       0x1bbb
 #define ALCATEL_PRODUCT_X060S_X200              0x0000
 #define ALCATEL_PRODUCT_X220_X500D              0x0017
+#define ALCATEL_PRODUCT_L100V                   0x011e
 
 #define PIRELLI_VENDOR_ID                       0x1266
 #define PIRELLI_PRODUCT_C100_1                  0x1002
@@ -429,9 +430,12 @@ static void option_instat_callback(struct urb *urb);
 #define MEDIATEK_VENDOR_ID                      0x0e8d
 #define MEDIATEK_PRODUCT_DC_1COM                0x00a0
 #define MEDIATEK_PRODUCT_DC_4COM                0x00a5
+#define MEDIATEK_PRODUCT_DC_4COM2               0x00a7
 #define MEDIATEK_PRODUCT_DC_5COM                0x00a4
 #define MEDIATEK_PRODUCT_7208_1COM              0x7101
 #define MEDIATEK_PRODUCT_7208_2COM              0x7102
+#define MEDIATEK_PRODUCT_7103_2COM              0x7103
+#define MEDIATEK_PRODUCT_7106_2COM              0x7106
 #define MEDIATEK_PRODUCT_FP_1COM                0x0003
 #define MEDIATEK_PRODUCT_FP_2COM                0x0023
 #define MEDIATEK_PRODUCT_FPDC_1COM              0x0043
@@ -441,6 +445,10 @@ static void option_instat_callback(struct urb *urb);
 #define CELLIENT_VENDOR_ID                      0x2692
 #define CELLIENT_PRODUCT_MEN200                 0x9005
 
+/* Hyundai Petatel Inc. products */
+#define PETATEL_VENDOR_ID                       0x1ff4
+#define PETATEL_PRODUCT_NP10T                   0x600e
+
 /* some devices interfaces need special handling due to a number of reasons */
 enum option_blacklist_reason {
                 OPTION_BLACKLIST_NONE = 0,
@@ -553,6 +561,8 @@ static const struct usb_device_id option_ids[] = {
         { USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_GLX) },
         { USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_GKE) },
         { USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_GLE) },
+        { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E173, 0xff, 0xff, 0xff),
+                .driver_info = (kernel_ulong_t) &net_intf1_blacklist },
         { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4505, 0xff, 0xff, 0xff),
                 .driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist },
         { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3765, 0xff, 0xff, 0xff),
@@ -741,23 +751,23 @@ static const struct usb_device_id option_ids[] = {
         { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_620UW) },
         { USB_DEVICE(AXESSTEL_VENDOR_ID, AXESSTEL_PRODUCT_MV110H) },
         { USB_DEVICE(YISO_VENDOR_ID, YISO_PRODUCT_U893) },
-        { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_1) },
-        { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_2) },
-        { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1004) },
-        { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1005) },
-        { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1006) },
-        { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1007) },
-        { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1008) },
-        { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1009) },
-        { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_100A) },
-        { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_100B) },
-        { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_100C) },
-        { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_100D) },
-        { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_100E) },
-        { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_100F) },
-        { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1010) },
-        { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1011) },
-        { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1012) },
+        { USB_DEVICE_INTERFACE_CLASS(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_1, 0xff) },
+        { USB_DEVICE_INTERFACE_CLASS(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_2, 0xff) },
+        { USB_DEVICE_INTERFACE_CLASS(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1004, 0xff) },
+        { USB_DEVICE_INTERFACE_CLASS(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1005, 0xff) },
+        { USB_DEVICE_INTERFACE_CLASS(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1006, 0xff) },
+        { USB_DEVICE_INTERFACE_CLASS(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1007, 0xff) },
+        { USB_DEVICE_INTERFACE_CLASS(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1008, 0xff) },
+        { USB_DEVICE_INTERFACE_CLASS(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1009, 0xff) },
+        { USB_DEVICE_INTERFACE_CLASS(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_100A, 0xff) },
+        { USB_DEVICE_INTERFACE_CLASS(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_100B, 0xff) },
+        { USB_DEVICE_INTERFACE_CLASS(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_100C, 0xff) },
+        { USB_DEVICE_INTERFACE_CLASS(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_100D, 0xff) },
+        { USB_DEVICE_INTERFACE_CLASS(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_100E, 0xff) },
+        { USB_DEVICE_INTERFACE_CLASS(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_100F, 0xff) },
+        { USB_DEVICE_INTERFACE_CLASS(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1010, 0xff) },
+        { USB_DEVICE_INTERFACE_CLASS(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1011, 0xff) },
+        { USB_DEVICE_INTERFACE_CLASS(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1012, 0xff) },
         { USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_PRODUCT_KPC650) },
         { USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_PRODUCT_KPC680) },
         { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6000)}, /* ZTE AC8700 */
@@ -884,6 +894,10 @@ static const struct usb_device_id option_ids[] = {
         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0126, 0xff, 0xff, 0xff),
                 .driver_info = (kernel_ulong_t)&net_intf5_blacklist },
         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0128, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0135, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0136, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0137, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0139, 0xff, 0xff, 0xff) },
         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0142, 0xff, 0xff, 0xff) },
         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0143, 0xff, 0xff, 0xff) },
         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0144, 0xff, 0xff, 0xff) },
@@ -904,20 +918,35 @@ static const struct usb_device_id option_ids[] = {
         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0165, 0xff, 0xff, 0xff) },
         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0167, 0xff, 0xff, 0xff),
           .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0189, 0xff, 0xff, 0xff) },
         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0191, 0xff, 0xff, 0xff), /* ZTE EuFi890 */
           .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0196, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0197, 0xff, 0xff, 0xff) },
         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0199, 0xff, 0xff, 0xff), /* ZTE MF820S */
           .driver_info = (kernel_ulong_t)&net_intf1_blacklist },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0200, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0201, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0254, 0xff, 0xff, 0xff) },
         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0257, 0xff, 0xff, 0xff), /* ZTE MF821 */
           .driver_info = (kernel_ulong_t)&net_intf3_blacklist },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0265, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0284, 0xff, 0xff, 0xff), /* ZTE MF880 */
+          .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0317, 0xff, 0xff, 0xff) },
         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0326, 0xff, 0xff, 0xff),
           .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0330, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0395, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0414, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0417, 0xff, 0xff, 0xff) },
         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1008, 0xff, 0xff, 0xff),
           .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1010, 0xff, 0xff, 0xff),
           .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1012, 0xff, 0xff, 0xff),
           .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1018, 0xff, 0xff, 0xff) },
         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1021, 0xff, 0xff, 0xff),
           .driver_info = (kernel_ulong_t)&net_intf2_blacklist },
         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1057, 0xff, 0xff, 0xff) },
@@ -1097,6 +1126,10 @@ static const struct usb_device_id option_ids[] = {
         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1298, 0xff, 0xff, 0xff) },
         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1299, 0xff, 0xff, 0xff) },
         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1300, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1301, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1302, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1303, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1333, 0xff, 0xff, 0xff) },
         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1401, 0xff, 0xff, 0xff),
                 .driver_info = (kernel_ulong_t)&net_intf2_blacklist },
         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1402, 0xff, 0xff, 0xff),
@@ -1166,6 +1199,8 @@ static const struct usb_device_id option_ids[] = {
           .driver_info = (kernel_ulong_t)&alcatel_x200_blacklist
         },
         { USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X220_X500D) },
+        { USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_L100V),
+          .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
         { USB_DEVICE(AIRPLUS_VENDOR_ID, AIRPLUS_PRODUCT_MCD650) },
         { USB_DEVICE(TLAYTECH_VENDOR_ID, TLAYTECH_PRODUCT_TEU800) },
         { USB_DEVICE(LONGCHEER_VENDOR_ID, FOUR_G_SYSTEMS_PRODUCT_W14),
@@ -1174,22 +1209,22 @@ static const struct usb_device_id option_ids[] = {
         { USB_DEVICE(LONGCHEER_VENDOR_ID, ZOOM_PRODUCT_4597) },
         { USB_DEVICE(HAIER_VENDOR_ID, HAIER_PRODUCT_CE100) },
         /* Pirelli  */
-        { USB_DEVICE(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_C100_1)},
-        { USB_DEVICE(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_C100_2)},
-        { USB_DEVICE(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_1004)},
-        { USB_DEVICE(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_1005)},
-        { USB_DEVICE(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_1006)},
-        { USB_DEVICE(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_1007)},
-        { USB_DEVICE(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_1008)},
-        { USB_DEVICE(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_1009)},
-        { USB_DEVICE(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_100A)},
-        { USB_DEVICE(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_100B) },
-        { USB_DEVICE(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_100C) },
-        { USB_DEVICE(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_100D) },
-        { USB_DEVICE(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_100E) },
-        { USB_DEVICE(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_100F) },
-        { USB_DEVICE(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_1011)},
-        { USB_DEVICE(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_1012)},
+        { USB_DEVICE_INTERFACE_CLASS(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_C100_1, 0xff) },
+        { USB_DEVICE_INTERFACE_CLASS(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_C100_2, 0xff) },
+        { USB_DEVICE_INTERFACE_CLASS(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_1004, 0xff) },
+        { USB_DEVICE_INTERFACE_CLASS(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_1005, 0xff) },
+        { USB_DEVICE_INTERFACE_CLASS(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_1006, 0xff) },
+        { USB_DEVICE_INTERFACE_CLASS(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_1007, 0xff) },
+        { USB_DEVICE_INTERFACE_CLASS(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_1008, 0xff) },
+        { USB_DEVICE_INTERFACE_CLASS(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_1009, 0xff) },
+        { USB_DEVICE_INTERFACE_CLASS(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_100A, 0xff) },
+        { USB_DEVICE_INTERFACE_CLASS(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_100B, 0xff) },
+        { USB_DEVICE_INTERFACE_CLASS(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_100C, 0xff) },
+        { USB_DEVICE_INTERFACE_CLASS(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_100D, 0xff) },
+        { USB_DEVICE_INTERFACE_CLASS(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_100E, 0xff) },
+        { USB_DEVICE_INTERFACE_CLASS(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_100F, 0xff) },
+        { USB_DEVICE_INTERFACE_CLASS(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_1011, 0xff) },
+        { USB_DEVICE_INTERFACE_CLASS(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_1012, 0xff) },
         /* Cinterion */
         { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_EU3_E) },
         { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_EU3_P) },
@@ -1270,7 +1305,12 @@ static const struct usb_device_id option_ids[] = {
         { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_FP_2COM, 0x0a, 0x00, 0x00) },
         { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_FPDC_1COM, 0x0a, 0x00, 0x00) },
         { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_FPDC_2COM, 0x0a, 0x00, 0x00) },
+        { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_7103_2COM, 0xff, 0x00, 0x00) },
+        { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_7106_2COM, 0x02, 0x02, 0x01) },
+        { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_DC_4COM2, 0xff, 0x02, 0x01) },
+        { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_DC_4COM2, 0xff, 0x00, 0x00) },
         { USB_DEVICE(CELLIENT_VENDOR_ID, CELLIENT_PRODUCT_MEN200) },
+        { USB_DEVICE(PETATEL_VENDOR_ID, PETATEL_PRODUCT_NP10T) },
         { } /* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, option_ids);
@@ -1350,20 +1390,10 @@ static int option_probe(struct usb_serial *serial,
                                 &serial->interface->cur_altsetting->desc;
         struct usb_device_descriptor *dev_desc = &serial->dev->descriptor;
 
-        /*
-         * D-Link DWM 652 still exposes CD-Rom emulation interface in modem
-         * mode.
-         */
-        if (dev_desc->idVendor == DLINK_VENDOR_ID &&
-                dev_desc->idProduct == DLINK_PRODUCT_DWM_652 &&
-                iface_desc->bInterfaceClass == 0x08)
+        /* Never bind to the CD-Rom emulation interface */
+        if (iface_desc->bInterfaceClass == 0x08)
                 return -ENODEV;
 
-        /* Bandrich modem and AT command interface is 0xff */
-        if ((dev_desc->idVendor == BANDRICH_VENDOR_ID ||
-                dev_desc->idVendor == PIRELLI_VENDOR_ID) &&
-                iface_desc->bInterfaceClass != 0xff)
-                return -ENODEV;
         /*
          * Don't bind reserved interfaces (like network ones) which often have
          * the same class/subclass/protocol as the serial interfaces.  Look at
@@ -1378,9 +1408,9 @@ static int option_probe(struct usb_serial *serial,
          * Don't bind network interface on Samsung GT-B3730, it is handled by
          * a separate module.
          */
-        if (dev_desc->idVendor == SAMSUNG_VENDOR_ID &&
-                dev_desc->idProduct == SAMSUNG_PRODUCT_GT_B3730 &&
-                iface_desc->bInterfaceClass != USB_CLASS_CDC_DATA)
+        if (dev_desc->idVendor == cpu_to_le16(SAMSUNG_VENDOR_ID) &&
+            dev_desc->idProduct == cpu_to_le16(SAMSUNG_PRODUCT_GT_B3730) &&
+            iface_desc->bInterfaceClass != USB_CLASS_CDC_DATA)
                 return -ENODEV;
 
         /* Store device id so we can use it during attach. */
@@ -1518,5 +1548,4 @@ static int option_send_setup(struct usb_serial_port *port)
 
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_VERSION(DRIVER_VERSION);
 MODULE_LICENSE("GPL");
diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c
index cee9a52ca891..d217fd6ee43f 100644
--- a/drivers/usb/serial/oti6858.c
+++ b/drivers/usb/serial/oti6858.c
@@ -57,7 +57,6 @@
 #define OTI6858_DESCRIPTION \
         "Ours Technology Inc. OTi-6858 USB to serial adapter driver"
 #define OTI6858_AUTHOR "Tomasz Michal Lukaszewski <FIXME@FIXME>"
-#define OTI6858_VERSION "0.2"
 
 static const struct usb_device_id id_table[] = {
         { USB_DEVICE(OTI6858_VENDOR_ID, OTI6858_PRODUCT_ID) },
@@ -899,5 +898,4 @@ module_usb_serial_driver(serial_drivers, id_table);
 
 MODULE_DESCRIPTION(OTI6858_DESCRIPTION);
 MODULE_AUTHOR(OTI6858_AUTHOR);
-MODULE_VERSION(OTI6858_VERSION);
 MODULE_LICENSE("GPL");
diff --git a/drivers/usb/serial/quatech2.c b/drivers/usb/serial/quatech2.c
index ffcfc962ab10..d152be97d041 100644
--- a/drivers/usb/serial/quatech2.c
+++ b/drivers/usb/serial/quatech2.c
@@ -65,8 +65,6 @@
 #define QT2_WRITE_BUFFER_SIZE   512  /* size of write buffer */
 #define QT2_WRITE_CONTROL_SIZE  5    /* control bytes used for a write */
 
-/* Version Information */
-#define DRIVER_VERSION "v0.1"
 #define DRIVER_DESC "Quatech 2nd gen USB to Serial Driver"
 
 #define USB_VENDOR_ID_QUATECH   0x061d
diff --git a/drivers/usb/serial/siemens_mpi.c b/drivers/usb/serial/siemens_mpi.c
index e4a1787cdbac..a76b1ae54a2a 100644
--- a/drivers/usb/serial/siemens_mpi.c
+++ b/drivers/usb/serial/siemens_mpi.c
@@ -16,8 +16,6 @@
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
 
-/* Version Information */
-#define DRIVER_VERSION "Version 0.1 09/26/2005"
 #define DRIVER_AUTHOR "Thomas Hergenhahn@web.de http://libnodave.sf.net"
 #define DRIVER_DESC "Driver for Siemens USB/MPI adapter"
 
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index 270860f6bb2a..af06f2f5f38b 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -18,7 +18,7 @@
 */
 /* Uncomment to log function calls */
 /* #define DEBUG */
-#define DRIVER_VERSION "v.1.7.16"
+
 #define DRIVER_AUTHOR "Kevin Lloyd, Elina Pasheva, Matthew Safar, Rory Filer"
 #define DRIVER_DESC "USB Driver for Sierra Wireless USB modems"
 
@@ -1078,7 +1078,6 @@ module_usb_serial_driver(serial_drivers, id_table);
 
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_VERSION(DRIVER_VERSION);
 MODULE_LICENSE("GPL");
 
 module_param(nmea, bool, S_IRUGO | S_IWUSR);
diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c
index 769c137f8975..a42536af1256 100644
--- a/drivers/usb/serial/spcp8x5.c
+++ b/drivers/usb/serial/spcp8x5.c
@@ -28,9 +28,6 @@
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
 
-
-/* Version Information */
-#define DRIVER_VERSION  "v0.10"
 #define DRIVER_DESC     "SPCP8x5 USB to serial adaptor driver"
 
 #define SPCP8x5_007_VID         0x04FC
@@ -651,5 +648,4 @@ static struct usb_serial_driver * const serial_drivers[] = {
 module_usb_serial_driver(serial_drivers, id_table);
 
 MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_VERSION(DRIVER_VERSION);
 MODULE_LICENSE("GPL");
diff --git a/drivers/usb/serial/ssu100.c b/drivers/usb/serial/ssu100.c
index 868d1e6852e2..4543ea350229 100644
--- a/drivers/usb/serial/ssu100.c
+++ b/drivers/usb/serial/ssu100.c
@@ -46,8 +46,6 @@
 #define FULLPWRBIT          0x00000080
 #define NEXT_BOARD_POWER_BIT        0x00000004
 
-/* Version Information */
-#define DRIVER_VERSION "v0.1"
 #define DRIVER_DESC "Quatech SSU-100 USB to Serial Driver"
 
 #define USB_VENDOR_ID_QUATECH   0x061d  /* Quatech VID */
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 73b8e0569164..64bda135ba7e 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -597,6 +597,7 @@ static void port_release(struct device *dev)
         kfifo_free(&port->write_fifo);
         kfree(port->interrupt_in_buffer);
         kfree(port->interrupt_out_buffer);
+        tty_port_destroy(&port->port);
         kfree(port);
 }
 
diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c
index a3e9c095f0d8..01c94aada56c 100644
--- a/drivers/usb/serial/usb_wwan.c
+++ b/drivers/usb/serial/usb_wwan.c
@@ -19,7 +19,6 @@
   - controlling the baud rate doesn't make sense
 */
 
-#define DRIVER_VERSION "v0.7.2"
 #define DRIVER_AUTHOR "Matthias Urlichs <smurf@smurf.noris.de>"
 #define DRIVER_DESC "USB Driver for GSM modems"
 
@@ -710,5 +709,4 @@ EXPORT_SYMBOL(usb_wwan_resume);
 
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_VERSION(DRIVER_VERSION);
 MODULE_LICENSE("GPL");
diff --git a/drivers/usb/serial/vivopay-serial.c b/drivers/usb/serial/vivopay-serial.c
index 0c0aa876c209..6299526ff8c3 100644
--- a/drivers/usb/serial/vivopay-serial.c
+++ b/drivers/usb/serial/vivopay-serial.c
@@ -10,8 +10,6 @@
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
 
-
-#define DRIVER_VERSION "v1.0"
 #define DRIVER_DESC "ViVOpay USB Serial Driver"
 
 #define VIVOPAY_VENDOR_ID 0x1d5f
@@ -42,5 +40,4 @@ module_usb_serial_driver(serial_drivers, id_table);
 
 MODULE_AUTHOR("Forest Bond <forest.bond@outpostembedded.com>");
 MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_VERSION(DRIVER_VERSION);
 MODULE_LICENSE("GPL");
diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig
index 0ae7bb64b5ea..eab04a6b5fbc 100644
--- a/drivers/usb/storage/Kconfig
+++ b/drivers/usb/storage/Kconfig
@@ -203,7 +203,7 @@ config USB_STORAGE_ENE_UB6250
 
 config USB_UAS
         tristate "USB Attached SCSI"
-        depends on USB && SCSI
+        depends on USB && SCSI && BROKEN
         help
           The USB Attached SCSI protocol is supported by some USB
           storage devices.  It permits higher performance by supporting
diff --git a/drivers/usb/storage/realtek_cr.c b/drivers/usb/storage/realtek_cr.c
index d36446dd7ae8..6c3586a4c956 100644
--- a/drivers/usb/storage/realtek_cr.c
+++ b/drivers/usb/storage/realtek_cr.c
@@ -455,7 +455,7 @@ static int rts51x_check_status(struct us_data *us, u8 lun)
         u8 buf[16];
 
         retval = rts51x_read_status(us, lun, buf, 16, &(chip->status_len));
-        if (retval < 0)
+        if (retval != STATUS_SUCCESS)
                 return -EIO;
 
         US_DEBUGP("chip->status_len = %d\n", chip->status_len);
@@ -883,7 +883,7 @@ static void rts51x_invoke_transport(struct scsi_cmnd *srb, struct us_data *us)
                 } else {
                         US_DEBUGP("%s: NOT working scsi, not SS\n", __func__);
                         chip->proto_handler_backup(srb, us);
-                        /* Check wether card is plugged in */
+                        /* Check whether card is plugged in */
                         if (srb->cmnd[0] == TEST_UNIT_READY) {
                                 if (srb->result == SAM_STAT_GOOD) {
                                         SET_LUN_READY(chip, srb->device->lun);
diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c
index 12aa72630aed..31b3e1a61bbd 100644
--- a/drivers/usb/storage/usb.c
+++ b/drivers/usb/storage/usb.c
@@ -925,7 +925,6 @@ int usb_stor_probe1(struct us_data **pus,
         host->max_cmd_len = 16;
         host->sg_tablesize = usb_stor_sg_tablesize(intf);
         *pus = us = host_to_us(host);
-        memset(us, 0, sizeof(struct us_data));
         mutex_init(&(us->dev_mutex));
         us_set_lock_class(&us->dev_mutex, intf);
         init_completion(&us->cmnd_ready);
diff --git a/drivers/usb/usb-skeleton.c b/drivers/usb/usb-skeleton.c
index 0616f235bd6b..ce310170829f 100644
--- a/drivers/usb/usb-skeleton.c
+++ b/drivers/usb/usb-skeleton.c
@@ -105,20 +105,15 @@ static int skel_open(struct inode *inode, struct file *file)
                 goto exit;
         }
 
-        /* increment our usage count for the device */
-        kref_get(&dev->kref);
-
-        /* lock the device to allow correctly handling errors
-         * in resumption */
-        mutex_lock(&dev->io_mutex);
-
         retval = usb_autopm_get_interface(interface);
         if (retval)
-                goto out_err;
+                goto exit;
+
+        /* increment our usage count for the device */
+        kref_get(&dev->kref);
 
         /* save our object in the file's private structure */
         file->private_data = dev;
-        mutex_unlock(&dev->io_mutex);
 
 exit:
         return retval;
diff --git a/drivers/usb/wusbcore/devconnect.c b/drivers/usb/wusbcore/devconnect.c
index 231009af65a3..1d365316960c 100644
--- a/drivers/usb/wusbcore/devconnect.c
+++ b/drivers/usb/wusbcore/devconnect.c
@@ -847,19 +847,6 @@ static void wusb_dev_bos_rm(struct wusb_dev *wusb_dev)
         wusb_dev->wusb_cap_descr = NULL;
 };
 
-static struct usb_wireless_cap_descriptor wusb_cap_descr_default = {
-        .bLength = sizeof(wusb_cap_descr_default),
-        .bDescriptorType = USB_DT_DEVICE_CAPABILITY,
-        .bDevCapabilityType = USB_CAP_TYPE_WIRELESS_USB,
-
-        .bmAttributes = USB_WIRELESS_BEACON_NONE,
-        .wPHYRates = cpu_to_le16(USB_WIRELESS_PHY_53),
-        .bmTFITXPowerInfo = 0,
-        .bmFFITXPowerInfo = 0,
-        .bmBandGroup = cpu_to_le16(0x0001),     /* WUSB1.0[7.4.1] bottom */
-        .bReserved = 0
-};
-
 /*
  * USB stack's device addition Notifier Callback
  *