27 files changed, 479 insertions, 86 deletions

diff --git a/drivers/usb/atm/ueagle-atm.c b/drivers/usb/atm/ueagle-atm.c
index ea071a5b6eee..44447f54942f 100644
--- a/drivers/usb/atm/ueagle-atm.c
+++ b/drivers/usb/atm/ueagle-atm.c
@@ -2301,7 +2301,7 @@ out:
         return ret;
 }
 
-static DEVICE_ATTR(stat_status, S_IWUGO | S_IRUGO, read_status, reboot);
+static DEVICE_ATTR(stat_status, S_IWUSR | S_IRUGO, read_status, reboot);
 
 static ssize_t read_human_status(struct device *dev,
                         struct device_attribute *attr, char *buf)
@@ -2364,8 +2364,7 @@ out:
         return ret;
 }
 
-static DEVICE_ATTR(stat_human_status, S_IWUGO | S_IRUGO,
-                                read_human_status, NULL);
+static DEVICE_ATTR(stat_human_status, S_IRUGO, read_human_status, NULL);
 
 static ssize_t read_delin(struct device *dev, struct device_attribute *attr,
                 char *buf)
@@ -2397,7 +2396,7 @@ out:
         return ret;
 }
 
-static DEVICE_ATTR(stat_delin, S_IWUGO | S_IRUGO, read_delin, NULL);
+static DEVICE_ATTR(stat_delin, S_IRUGO, read_delin, NULL);
 
 #define UEA_ATTR(name, reset)                                   \
                                                                 \
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 61800f77dac8..ced846ac4141 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -1330,6 +1330,8 @@ static int map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb,
          */
 
         if (usb_endpoint_xfer_control(&urb->ep->desc)) {
+                if (hcd->self.uses_pio_for_control)
+                        return ret;
                 if (hcd->self.uses_dma) {
                         urb->setup_dma = dma_map_single(
                                         hcd->self.controller,
diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c
index b5e20e873cba..717ff653fa23 100644
--- a/drivers/usb/gadget/atmel_usba_udc.c
+++ b/drivers/usb/gadget/atmel_usba_udc.c
@@ -2017,7 +2017,7 @@ static int __init usba_udc_probe(struct platform_device *pdev)
                         }
                 } else {
                         /* gpio_request fail so use -EINVAL for gpio_is_valid */
-                        ubc->vbus_pin = -EINVAL;
+                        udc->vbus_pin = -EINVAL;
                 }
         }
 
diff --git a/drivers/usb/host/ehci-dbg.c b/drivers/usb/host/ehci-dbg.c
index 86afdc73322f..6e2599661b5b 100644
--- a/drivers/usb/host/ehci-dbg.c
+++ b/drivers/usb/host/ehci-dbg.c
@@ -1067,7 +1067,7 @@ static inline void create_debug_files (struct ehci_hcd *ehci)
                                                     &debug_registers_fops))
                 goto file_error;
 
-        if (!debugfs_create_file("lpm", S_IRUGO|S_IWUGO, ehci->debug_dir, bus,
+        if (!debugfs_create_file("lpm", S_IRUGO|S_IWUSR, ehci->debug_dir, bus,
                                                     &debug_lpm_fops))
                 goto file_error;
 
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 502a7e6fef42..e9062806d4a2 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -1063,10 +1063,11 @@ rescan:
                                 tmp && tmp != qh;
                                 tmp = tmp->qh_next.qh)
                         continue;
-                /* periodic qh self-unlinks on empty */
-                if (!tmp)
-                        goto nogood;
-                unlink_async (ehci, qh);
+                /* periodic qh self-unlinks on empty, and a COMPLETING qh
+                 * may already be unlinked.
+                 */
+                if (tmp)
+                        unlink_async(ehci, qh);
                 /* FALL THROUGH */
         case QH_STATE_UNLINK:           /* wait for hw to finish? */
         case QH_STATE_UNLINK_WAIT:
@@ -1083,7 +1084,6 @@ idle_timeout:
                 }
                 /* else FALL THROUGH */
         default:
-nogood:
                 /* caller was supposed to have unlinked any requests;
                  * that's not our job.  just leak this memory.
                  */
diff --git a/drivers/usb/host/ehci-mem.c b/drivers/usb/host/ehci-mem.c
index d36e4e75e08d..12f70c302b0b 100644
--- a/drivers/usb/host/ehci-mem.c
+++ b/drivers/usb/host/ehci-mem.c
@@ -141,6 +141,10 @@ static void ehci_mem_cleanup (struct ehci_hcd *ehci)
                 qh_put (ehci->async);
         ehci->async = NULL;
 
+        if (ehci->dummy)
+                qh_put(ehci->dummy);
+        ehci->dummy = NULL;
+
         /* DMA consistent memory and pools */
         if (ehci->qtd_pool)
                 dma_pool_destroy (ehci->qtd_pool);
@@ -227,8 +231,26 @@ static int ehci_mem_init (struct ehci_hcd *ehci, gfp_t flags)
         if (ehci->periodic == NULL) {
                 goto fail;
         }
-        for (i = 0; i < ehci->periodic_size; i++)
-                ehci->periodic [i] = EHCI_LIST_END(ehci);
+
+        if (ehci->use_dummy_qh) {
+                struct ehci_qh_hw       *hw;
+                ehci->dummy = ehci_qh_alloc(ehci, flags);
+                if (!ehci->dummy)
+                        goto fail;
+
+                hw = ehci->dummy->hw;
+                hw->hw_next = EHCI_LIST_END(ehci);
+                hw->hw_qtd_next = EHCI_LIST_END(ehci);
+                hw->hw_alt_next = EHCI_LIST_END(ehci);
+                hw->hw_token &= ~QTD_STS_ACTIVE;
+                ehci->dummy->hw = hw;
+
+                for (i = 0; i < ehci->periodic_size; i++)
+                        ehci->periodic[i] = ehci->dummy->qh_dma;
+        } else {
+                for (i = 0; i < ehci->periodic_size; i++)
+                        ehci->periodic[i] = EHCI_LIST_END(ehci);
+        }
 
         /* software shadow of hardware table */
         ehci->pshadow = kcalloc(ehci->periodic_size, sizeof(void *), flags);
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index a1e8d273103f..655f3c9f88bf 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -103,6 +103,19 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
         if (retval)
                 return retval;
 
+        if ((pdev->vendor == PCI_VENDOR_ID_AMD && pdev->device == 0x7808) ||
+            (pdev->vendor == PCI_VENDOR_ID_ATI && pdev->device == 0x4396)) {
+                /* EHCI controller on AMD SB700/SB800/Hudson-2/3 platforms may
+                 * read/write memory space which does not belong to it when
+                 * there is NULL pointer with T-bit set to 1 in the frame list
+                 * table. To avoid the issue, the frame list link pointer
+                 * should always contain a valid pointer to a inactive qh.
+                 */
+                ehci->use_dummy_qh = 1;
+                ehci_info(ehci, "applying AMD SB700/SB800/Hudson-2/3 EHCI "
+                                "dummy qh workaround\n");
+        }
+
         /* data structure init */
         retval = ehci_init(hcd);
         if (retval)
@@ -148,6 +161,18 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
                         if (pdev->revision < 0xa4)
                                 ehci->no_selective_suspend = 1;
                         break;
+
+                /* MCP89 chips on the MacBookAir3,1 give EPROTO when
+                 * fetching device descriptors unless LPM is disabled.
+                 * There are also intermittent problems enumerating
+                 * devices with PPCD enabled.
+                 */
+                case 0x0d9d:
+                        ehci_info(ehci, "disable lpm/ppcd for nvidia mcp89");
+                        ehci->has_lpm = 0;
+                        ehci->has_ppcd = 0;
+                        ehci->command &= ~CMD_PPCEE;
+                        break;
                 }
                 break;
         case PCI_VENDOR_ID_VIA:
diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c
index a92526d6e5ae..d9f78eb26572 100644
--- a/drivers/usb/host/ehci-sched.c
+++ b/drivers/usb/host/ehci-sched.c
@@ -98,7 +98,14 @@ static void periodic_unlink (struct ehci_hcd *ehci, unsigned frame, void *ptr)
          */
         *prev_p = *periodic_next_shadow(ehci, &here,
                         Q_NEXT_TYPE(ehci, *hw_p));
-        *hw_p = *shadow_next_periodic(ehci, &here, Q_NEXT_TYPE(ehci, *hw_p));
+
+        if (!ehci->use_dummy_qh ||
+            *shadow_next_periodic(ehci, &here, Q_NEXT_TYPE(ehci, *hw_p))
+                        != EHCI_LIST_END(ehci))
+                *hw_p = *shadow_next_periodic(ehci, &here,
+                                Q_NEXT_TYPE(ehci, *hw_p));
+        else
+                *hw_p = ehci->dummy->qh_dma;
 }
 
 /* how many of the uframe's 125 usecs are allocated? */
@@ -2335,7 +2342,11 @@ restart:
                                  * pointer for much longer, if at all.
                                  */
                                 *q_p = q.itd->itd_next;
-                                *hw_p = q.itd->hw_next;
+                                if (!ehci->use_dummy_qh ||
+                                    q.itd->hw_next != EHCI_LIST_END(ehci))
+                                        *hw_p = q.itd->hw_next;
+                                else
+                                        *hw_p = ehci->dummy->qh_dma;
                                 type = Q_NEXT_TYPE(ehci, q.itd->hw_next);
                                 wmb();
                                 modified = itd_complete (ehci, q.itd);
@@ -2368,7 +2379,11 @@ restart:
                                  * URB completion.
                                  */
                                 *q_p = q.sitd->sitd_next;
-                                *hw_p = q.sitd->hw_next;
+                                if (!ehci->use_dummy_qh ||
+                                    q.sitd->hw_next != EHCI_LIST_END(ehci))
+                                        *hw_p = q.sitd->hw_next;
+                                else
+                                        *hw_p = ehci->dummy->qh_dma;
                                 type = Q_NEXT_TYPE(ehci, q.sitd->hw_next);
                                 wmb();
                                 modified = sitd_complete (ehci, q.sitd);
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index bde823f704e9..ba8eab366b82 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -73,6 +73,7 @@ struct ehci_hcd {			/* one per controller */
 
         /* async schedule support */
         struct ehci_qh          *async;
+        struct ehci_qh          *dummy;         /* For AMD quirk use */
         struct ehci_qh          *reclaim;
         unsigned                scanning : 1;
 
@@ -131,6 +132,7 @@ struct ehci_hcd {			/* one per controller */
         unsigned                need_io_watchdog:1;
         unsigned                broken_periodic:1;
         unsigned                fs_i_thresh:1;  /* Intel iso scheduling */
+        unsigned                use_dummy_qh:1; /* AMD Frame List table quirk*/
 
         /* required for usb32 quirk */
         #define OHCI_CTRL_HCFS          (3 << 6)
diff --git a/drivers/usb/host/isp1362-hcd.c b/drivers/usb/host/isp1362-hcd.c
index 6c4fb4efb4bb..43a39eb56cc6 100644
--- a/drivers/usb/host/isp1362-hcd.c
+++ b/drivers/usb/host/isp1362-hcd.c
@@ -2683,7 +2683,7 @@ static int __devexit isp1362_remove(struct platform_device *pdev)
         return 0;
 }
 
-static int __init isp1362_probe(struct platform_device *pdev)
+static int __devinit isp1362_probe(struct platform_device *pdev)
 {
         struct usb_hcd *hcd;
         struct isp1362_hcd *isp1362_hcd;
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index fef5a1f9d483..5d963e350494 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -229,6 +229,13 @@ void xhci_ring_device(struct xhci_hcd *xhci, int slot_id)
 static void xhci_disable_port(struct xhci_hcd *xhci, u16 wIndex,
                 u32 __iomem *addr, u32 port_status)
 {
+        /* Don't allow the USB core to disable SuperSpeed ports. */
+        if (xhci->port_array[wIndex] == 0x03) {
+                xhci_dbg(xhci, "Ignoring request to disable "
+                                "SuperSpeed port.\n");
+                return;
+        }
+
         /* Write 1 to disable the port */
         xhci_writel(xhci, port_status | PORT_PE, addr);
         port_status = xhci_readl(xhci, addr);
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 202770676da3..0fae58ef8afe 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -1045,7 +1045,7 @@ static inline u32 xhci_get_max_esit_payload(struct xhci_hcd *xhci,
         if (udev->speed == USB_SPEED_SUPER)
                 return ep->ss_ep_comp.wBytesPerInterval;
 
-        max_packet = ep->desc.wMaxPacketSize & 0x3ff;
+        max_packet = GET_MAX_PACKET(ep->desc.wMaxPacketSize);
         max_burst = (ep->desc.wMaxPacketSize & 0x1800) >> 11;
         /* A 0 in max burst means 1 transfer per ESIT */
         return max_packet * (max_burst + 1);
@@ -1135,7 +1135,7 @@ int xhci_endpoint_init(struct xhci_hcd *xhci,
                 /* Fall through */
         case USB_SPEED_FULL:
         case USB_SPEED_LOW:
-                max_packet = ep->desc.wMaxPacketSize & 0x3ff;
+                max_packet = GET_MAX_PACKET(ep->desc.wMaxPacketSize);
                 ep_ctx->ep_info2 |= MAX_PACKET(max_packet);
                 break;
         default:
@@ -1443,6 +1443,13 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
         xhci->dcbaa = NULL;
 
         scratchpad_free(xhci);
+
+        xhci->num_usb2_ports = 0;
+        xhci->num_usb3_ports = 0;
+        kfree(xhci->usb2_ports);
+        kfree(xhci->usb3_ports);
+        kfree(xhci->port_array);
+
         xhci->page_size = 0;
         xhci->page_shift = 0;
         xhci->bus_suspended = 0;
@@ -1627,6 +1634,161 @@ static void xhci_set_hc_event_deq(struct xhci_hcd *xhci)
                         &xhci->ir_set->erst_dequeue);
 }
 
+static void xhci_add_in_port(struct xhci_hcd *xhci, unsigned int num_ports,
+                u32 __iomem *addr, u8 major_revision)
+{
+        u32 temp, port_offset, port_count;
+        int i;
+
+        if (major_revision > 0x03) {
+                xhci_warn(xhci, "Ignoring unknown port speed, "
+                                "Ext Cap %p, revision = 0x%x\n",
+                                addr, major_revision);
+                /* Ignoring port protocol we can't understand. FIXME */
+                return;
+        }
+
+        /* Port offset and count in the third dword, see section 7.2 */
+        temp = xhci_readl(xhci, addr + 2);
+        port_offset = XHCI_EXT_PORT_OFF(temp);
+        port_count = XHCI_EXT_PORT_COUNT(temp);
+        xhci_dbg(xhci, "Ext Cap %p, port offset = %u, "
+                        "count = %u, revision = 0x%x\n",
+                        addr, port_offset, port_count, major_revision);
+        /* Port count includes the current port offset */
+        if (port_offset == 0 || (port_offset + port_count - 1) > num_ports)
+                /* WTF? "Valid values are ‘1’ to MaxPorts" */
+                return;
+        port_offset--;
+        for (i = port_offset; i < (port_offset + port_count); i++) {
+                /* Duplicate entry.  Ignore the port if the revisions differ. */
+                if (xhci->port_array[i] != 0) {
+                        xhci_warn(xhci, "Duplicate port entry, Ext Cap %p,"
+                                        " port %u\n", addr, i);
+                        xhci_warn(xhci, "Port was marked as USB %u, "
+                                        "duplicated as USB %u\n",
+                                        xhci->port_array[i], major_revision);
+                        /* Only adjust the roothub port counts if we haven't
+                         * found a similar duplicate.
+                         */
+                        if (xhci->port_array[i] != major_revision &&
+                                xhci->port_array[i] != (u8) -1) {
+                                if (xhci->port_array[i] == 0x03)
+                                        xhci->num_usb3_ports--;
+                                else
+                                        xhci->num_usb2_ports--;
+                                xhci->port_array[i] = (u8) -1;
+                        }
+                        /* FIXME: Should we disable the port? */
+                }
+                xhci->port_array[i] = major_revision;
+                if (major_revision == 0x03)
+                        xhci->num_usb3_ports++;
+                else
+                        xhci->num_usb2_ports++;
+        }
+        /* FIXME: Should we disable ports not in the Extended Capabilities? */
+}
+
+/*
+ * Scan the Extended Capabilities for the "Supported Protocol Capabilities" that
+ * specify what speeds each port is supposed to be.  We can't count on the port
+ * speed bits in the PORTSC register being correct until a device is connected,
+ * but we need to set up the two fake roothubs with the correct number of USB
+ * 3.0 and USB 2.0 ports at host controller initialization time.
+ */
+static int xhci_setup_port_arrays(struct xhci_hcd *xhci, gfp_t flags)
+{
+        u32 __iomem *addr;
+        u32 offset;
+        unsigned int num_ports;
+        int i, port_index;
+
+        addr = &xhci->cap_regs->hcc_params;
+        offset = XHCI_HCC_EXT_CAPS(xhci_readl(xhci, addr));
+        if (offset == 0) {
+                xhci_err(xhci, "No Extended Capability registers, "
+                                "unable to set up roothub.\n");
+                return -ENODEV;
+        }
+
+        num_ports = HCS_MAX_PORTS(xhci->hcs_params1);
+        xhci->port_array = kzalloc(sizeof(*xhci->port_array)*num_ports, flags);
+        if (!xhci->port_array)
+                return -ENOMEM;
+
+        /*
+         * For whatever reason, the first capability offset is from the
+         * capability register base, not from the HCCPARAMS register.
+         * See section 5.3.6 for offset calculation.
+         */
+        addr = &xhci->cap_regs->hc_capbase + offset;
+        while (1) {
+                u32 cap_id;
+
+                cap_id = xhci_readl(xhci, addr);
+                if (XHCI_EXT_CAPS_ID(cap_id) == XHCI_EXT_CAPS_PROTOCOL)
+                        xhci_add_in_port(xhci, num_ports, addr,
+                                        (u8) XHCI_EXT_PORT_MAJOR(cap_id));
+                offset = XHCI_EXT_CAPS_NEXT(cap_id);
+                if (!offset || (xhci->num_usb2_ports + xhci->num_usb3_ports)
+                                == num_ports)
+                        break;
+                /*
+                 * Once you're into the Extended Capabilities, the offset is
+                 * always relative to the register holding the offset.
+                 */
+                addr += offset;
+        }
+
+        if (xhci->num_usb2_ports == 0 && xhci->num_usb3_ports == 0) {
+                xhci_warn(xhci, "No ports on the roothubs?\n");
+                return -ENODEV;
+        }
+        xhci_dbg(xhci, "Found %u USB 2.0 ports and %u USB 3.0 ports.\n",
+                        xhci->num_usb2_ports, xhci->num_usb3_ports);
+        /*
+         * Note we could have all USB 3.0 ports, or all USB 2.0 ports.
+         * Not sure how the USB core will handle a hub with no ports...
+         */
+        if (xhci->num_usb2_ports) {
+                xhci->usb2_ports = kmalloc(sizeof(*xhci->usb2_ports)*
+                                xhci->num_usb2_ports, flags);
+                if (!xhci->usb2_ports)
+                        return -ENOMEM;
+
+                port_index = 0;
+                for (i = 0; i < num_ports; i++)
+                        if (xhci->port_array[i] != 0x03) {
+                                xhci->usb2_ports[port_index] =
+                                        &xhci->op_regs->port_status_base +
+                                        NUM_PORT_REGS*i;
+                                xhci_dbg(xhci, "USB 2.0 port at index %u, "
+                                                "addr = %p\n", i,
+                                                xhci->usb2_ports[port_index]);
+                                port_index++;
+                        }
+        }
+        if (xhci->num_usb3_ports) {
+                xhci->usb3_ports = kmalloc(sizeof(*xhci->usb3_ports)*
+                                xhci->num_usb3_ports, flags);
+                if (!xhci->usb3_ports)
+                        return -ENOMEM;
+
+                port_index = 0;
+                for (i = 0; i < num_ports; i++)
+                        if (xhci->port_array[i] == 0x03) {
+                                xhci->usb3_ports[port_index] =
+                                        &xhci->op_regs->port_status_base +
+                                        NUM_PORT_REGS*i;
+                                xhci_dbg(xhci, "USB 3.0 port at index %u, "
+                                                "addr = %p\n", i,
+                                                xhci->usb3_ports[port_index]);
+                                port_index++;
+                        }
+        }
+        return 0;
+}
 
 int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
 {
@@ -1809,6 +1971,8 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
 
         if (scratchpad_alloc(xhci, flags))
                 goto fail;
+        if (xhci_setup_port_arrays(xhci, flags))
+                goto fail;
 
         return 0;
 
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 9f3115e729b1..df558f6f84e3 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -2104,7 +2104,6 @@ irqreturn_t xhci_irq(struct usb_hcd *hcd)
 
         if (!(status & STS_EINT)) {
                 spin_unlock(&xhci->lock);
-                xhci_warn(xhci, "Spurious interrupt.\n");
                 return IRQ_NONE;
         }
         xhci_dbg(xhci, "op reg status = %08x\n", status);
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 5d7d4e951ea4..45e4a3108cc3 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -577,6 +577,65 @@ static void xhci_restore_registers(struct xhci_hcd *xhci)
         xhci_write_64(xhci, xhci->s3.erst_base, &xhci->ir_set->erst_base);
 }
 
+static void xhci_set_cmd_ring_deq(struct xhci_hcd *xhci)
+{
+        u64     val_64;
+
+        /* step 2: initialize command ring buffer */
+        val_64 = xhci_read_64(xhci, &xhci->op_regs->cmd_ring);
+        val_64 = (val_64 & (u64) CMD_RING_RSVD_BITS) |
+                (xhci_trb_virt_to_dma(xhci->cmd_ring->deq_seg,
+                                      xhci->cmd_ring->dequeue) &
+                 (u64) ~CMD_RING_RSVD_BITS) |
+                xhci->cmd_ring->cycle_state;
+        xhci_dbg(xhci, "// Setting command ring address to 0x%llx\n",
+                        (long unsigned long) val_64);
+        xhci_write_64(xhci, val_64, &xhci->op_regs->cmd_ring);
+}
+
+/*
+ * The whole command ring must be cleared to zero when we suspend the host.
+ *
+ * The host doesn't save the command ring pointer in the suspend well, so we
+ * need to re-program it on resume.  Unfortunately, the pointer must be 64-byte
+ * aligned, because of the reserved bits in the command ring dequeue pointer
+ * register.  Therefore, we can't just set the dequeue pointer back in the
+ * middle of the ring (TRBs are 16-byte aligned).
+ */
+static void xhci_clear_command_ring(struct xhci_hcd *xhci)
+{
+        struct xhci_ring *ring;
+        struct xhci_segment *seg;
+
+        ring = xhci->cmd_ring;
+        seg = ring->deq_seg;
+        do {
+                memset(seg->trbs, 0, SEGMENT_SIZE);
+                seg = seg->next;
+        } while (seg != ring->deq_seg);
+
+        /* Reset the software enqueue and dequeue pointers */
+        ring->deq_seg = ring->first_seg;
+        ring->dequeue = ring->first_seg->trbs;
+        ring->enq_seg = ring->deq_seg;
+        ring->enqueue = ring->dequeue;
+
+        /*
+         * Ring is now zeroed, so the HW should look for change of ownership
+         * when the cycle bit is set to 1.
+         */
+        ring->cycle_state = 1;
+
+        /*
+         * Reset the hardware dequeue pointer.
+         * Yes, this will need to be re-written after resume, but we're paranoid
+         * and want to make sure the hardware doesn't access bogus memory
+         * because, say, the BIOS or an SMI started the host without changing
+         * the command ring pointers.
+         */
+        xhci_set_cmd_ring_deq(xhci);
+}
+
 /*
  * Stop HC (not bus-specific)
  *
@@ -604,6 +663,7 @@ int xhci_suspend(struct xhci_hcd *xhci)
                 spin_unlock_irq(&xhci->lock);
                 return -ETIMEDOUT;
         }
+        xhci_clear_command_ring(xhci);
 
         /* step 3: save registers */
         xhci_save_registers(xhci);
@@ -635,7 +695,6 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
         u32                     command, temp = 0;
         struct usb_hcd          *hcd = xhci_to_hcd(xhci);
         struct pci_dev          *pdev = to_pci_dev(hcd->self.controller);
-        u64     val_64;
         int     old_state, retval;
 
         old_state = hcd->state;
@@ -648,15 +707,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
                 /* step 1: restore register */
                 xhci_restore_registers(xhci);
                 /* step 2: initialize command ring buffer */
-                val_64 = xhci_read_64(xhci, &xhci->op_regs->cmd_ring);
-                val_64 = (val_64 & (u64) CMD_RING_RSVD_BITS) |
-                         (xhci_trb_virt_to_dma(xhci->cmd_ring->deq_seg,
-                                               xhci->cmd_ring->dequeue) &
-                         (u64) ~CMD_RING_RSVD_BITS) |
-                         xhci->cmd_ring->cycle_state;
-                xhci_dbg(xhci, "// Setting command ring address to 0x%llx\n",
-                                (long unsigned long) val_64);
-                xhci_write_64(xhci, val_64, &xhci->op_regs->cmd_ring);
+                xhci_set_cmd_ring_deq(xhci);
                 /* step 3: restore state and start state*/
                 /* step 3: set CRS flag */
                 command = xhci_readl(xhci, &xhci->op_regs->command);
@@ -714,6 +765,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
                 return retval;
         }
 
+        spin_unlock_irq(&xhci->lock);
         /* Re-setup MSI-X */
         if (hcd->irq)
                 free_irq(hcd->irq, hcd);
@@ -736,6 +788,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
                 hcd->irq = pdev->irq;
         }
 
+        spin_lock_irq(&xhci->lock);
         /* step 4: set Run/Stop bit */
         command = xhci_readl(xhci, &xhci->op_regs->command);
         command |= CMD_RUN;
@@ -1496,6 +1549,15 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci,
                 cmd_completion = command->completion;
                 cmd_status = &command->status;
                 command->command_trb = xhci->cmd_ring->enqueue;
+
+                /* Enqueue pointer can be left pointing to the link TRB,
+                 * we must handle that
+                 */
+                if ((command->command_trb->link.control & TRB_TYPE_BITMASK)
+                                == TRB_TYPE(TRB_LINK))
+                        command->command_trb =
+                                xhci->cmd_ring->enq_seg->next->trbs;
+
                 list_add_tail(&command->cmd_list, &virt_dev->cmd_list);
         } else {
                 in_ctx = virt_dev->in_ctx;
@@ -2219,6 +2281,15 @@ int xhci_discover_or_reset_device(struct usb_hcd *hcd, struct usb_device *udev)
         /* Attempt to submit the Reset Device command to the command ring */
         spin_lock_irqsave(&xhci->lock, flags);
         reset_device_cmd->command_trb = xhci->cmd_ring->enqueue;
+
+        /* Enqueue pointer can be left pointing to the link TRB,
+         * we must handle that
+         */
+        if ((reset_device_cmd->command_trb->link.control & TRB_TYPE_BITMASK)
+                        == TRB_TYPE(TRB_LINK))
+                reset_device_cmd->command_trb =
+                        xhci->cmd_ring->enq_seg->next->trbs;
+
         list_add_tail(&reset_device_cmd->cmd_list, &virt_dev->cmd_list);
         ret = xhci_queue_reset_device(xhci, slot_id);
         if (ret) {
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 93d3bf4d213c..170c367112d2 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -454,6 +454,24 @@ struct xhci_doorbell_array {
 
 
 /**
+ * struct xhci_protocol_caps
+ * @revision:           major revision, minor revision, capability ID,
+ *                      and next capability pointer.
+ * @name_string:        Four ASCII characters to say which spec this xHC
+ *                      follows, typically "USB ".
+ * @port_info:          Port offset, count, and protocol-defined information.
+ */
+struct xhci_protocol_caps {
+        u32     revision;
+        u32     name_string;
+        u32     port_info;
+};
+
+#define XHCI_EXT_PORT_MAJOR(x)  (((x) >> 24) & 0xff)
+#define XHCI_EXT_PORT_OFF(x)    ((x) & 0xff)
+#define XHCI_EXT_PORT_COUNT(x)  (((x) >> 8) & 0xff)
+
+/**
  * struct xhci_container_ctx
  * @type: Type of context.  Used to calculated offsets to contained contexts.
  * @size: Size of the context data
@@ -621,6 +639,11 @@ struct xhci_ep_ctx {
 #define MAX_PACKET_MASK         (0xffff << 16)
 #define MAX_PACKET_DECODED(p)   (((p) >> 16) & 0xffff)
 
+/* Get max packet size from ep desc. Bit 10..0 specify the max packet size.
+ * USB2.0 spec 9.6.6.
+ */
+#define GET_MAX_PACKET(p)       ((p) & 0x7ff)
+
 /* tx_info bitmasks */
 #define AVG_TRB_LENGTH_FOR_EP(p)        ((p) & 0xffff)
 #define MAX_ESIT_PAYLOAD_FOR_EP(p)      (((p) & 0xffff) << 16)
@@ -1235,6 +1258,14 @@ struct xhci_hcd {
         u32                     suspended_ports[8];     /* which ports are
                                                            suspended */
         unsigned long           resume_done[MAX_HC_PORTS];
+        /* Is each xHCI roothub port a USB 3.0, USB 2.0, or USB 1.1 port? */
+        u8                      *port_array;
+        /* Array of pointers to USB 3.0 PORTSC registers */
+        u32 __iomem             **usb3_ports;
+        unsigned int            num_usb3_ports;
+        /* Array of pointers to USB 2.0 PORTSC registers */
+        u32 __iomem             **usb2_ports;
+        unsigned int            num_usb2_ports;
 };
 
 /* For testing purposes */
diff --git a/drivers/usb/misc/cypress_cy7c63.c b/drivers/usb/misc/cypress_cy7c63.c
index 2f43c57743c9..9251773ecef4 100644
--- a/drivers/usb/misc/cypress_cy7c63.c
+++ b/drivers/usb/misc/cypress_cy7c63.c
@@ -196,11 +196,9 @@ static ssize_t get_port1_handler(struct device *dev,
         return read_port(dev, attr, buf, 1, CYPRESS_READ_PORT_ID1);
 }
 
-static DEVICE_ATTR(port0, S_IWUGO | S_IRUGO,
-                   get_port0_handler, set_port0_handler);
+static DEVICE_ATTR(port0, S_IRUGO | S_IWUSR, get_port0_handler, set_port0_handler);
 
-static DEVICE_ATTR(port1, S_IWUGO | S_IRUGO,
-                   get_port1_handler, set_port1_handler);
+static DEVICE_ATTR(port1, S_IRUGO | S_IWUSR, get_port1_handler, set_port1_handler);
 
 
 static int cypress_probe(struct usb_interface *interface,
diff --git a/drivers/usb/misc/trancevibrator.c b/drivers/usb/misc/trancevibrator.c
index d77aba46ae85..f63776a48e2a 100644
--- a/drivers/usb/misc/trancevibrator.c
+++ b/drivers/usb/misc/trancevibrator.c
@@ -86,7 +86,7 @@ static ssize_t set_speed(struct device *dev, struct device_attribute *attr,
         return count;
 }
 
-static DEVICE_ATTR(speed, S_IWUGO | S_IRUGO, show_speed, set_speed);
+static DEVICE_ATTR(speed, S_IRUGO | S_IWUSR, show_speed, set_speed);
 
 static int tv_probe(struct usb_interface *interface,
                     const struct usb_device_id *id)
diff --git a/drivers/usb/misc/usbled.c b/drivers/usb/misc/usbled.c
index 63da2c3c838f..c96f51de1696 100644
--- a/drivers/usb/misc/usbled.c
+++ b/drivers/usb/misc/usbled.c
@@ -94,7 +94,7 @@ static ssize_t set_##value(struct device *dev, struct device_attribute *attr, co
         change_color(led);                                              \
         return count;                                                   \
 }                                                                       \
-static DEVICE_ATTR(value, S_IWUGO | S_IRUGO, show_##value, set_##value);
+static DEVICE_ATTR(value, S_IRUGO | S_IWUSR, show_##value, set_##value);
 show_set(blue);
 show_set(red);
 show_set(green);
diff --git a/drivers/usb/misc/usbsevseg.c b/drivers/usb/misc/usbsevseg.c
index de8ef945b536..417b8f207e8b 100644
--- a/drivers/usb/misc/usbsevseg.c
+++ b/drivers/usb/misc/usbsevseg.c
@@ -192,7 +192,7 @@ static ssize_t set_attr_##name(struct device *dev, 		\
                                                                 \
         return count;                                           \
 }                                                               \
-static DEVICE_ATTR(name, S_IWUGO | S_IRUGO, show_attr_##name, set_attr_##name);
+static DEVICE_ATTR(name, S_IRUGO | S_IWUSR, show_attr_##name, set_attr_##name);
 
 static ssize_t show_attr_text(struct device *dev,
         struct device_attribute *attr, char *buf)
@@ -223,7 +223,7 @@ static ssize_t set_attr_text(struct device *dev,
         return count;
 }
 
-static DEVICE_ATTR(text, S_IWUGO | S_IRUGO, show_attr_text, set_attr_text);
+static DEVICE_ATTR(text, S_IRUGO | S_IWUSR, show_attr_text, set_attr_text);
 
 static ssize_t show_attr_decimals(struct device *dev,
         struct device_attribute *attr, char *buf)
@@ -272,8 +272,7 @@ static ssize_t set_attr_decimals(struct device *dev,
         return count;
 }
 
-static DEVICE_ATTR(decimals, S_IWUGO | S_IRUGO,
-        show_attr_decimals, set_attr_decimals);
+static DEVICE_ATTR(decimals, S_IRUGO | S_IWUSR, show_attr_decimals, set_attr_decimals);
 
 static ssize_t show_attr_textmode(struct device *dev,
         struct device_attribute *attr, char *buf)
@@ -319,8 +318,7 @@ static ssize_t set_attr_textmode(struct device *dev,
         return -EINVAL;
 }
 
-static DEVICE_ATTR(textmode, S_IWUGO | S_IRUGO,
-        show_attr_textmode, set_attr_textmode);
+static DEVICE_ATTR(textmode, S_IRUGO | S_IWUSR, show_attr_textmode, set_attr_textmode);
 
 
 MYDEV_ATTR_SIMPLE_UNSIGNED(powered, update_display_powered);
diff --git a/drivers/usb/misc/yurex.c b/drivers/usb/misc/yurex.c
index 719c6180b31f..ac5bfd619e62 100644
--- a/drivers/usb/misc/yurex.c
+++ b/drivers/usb/misc/yurex.c
@@ -536,6 +536,7 @@ static const struct file_operations yurex_fops = {
         .open =         yurex_open,
         .release =      yurex_release,
         .fasync =       yurex_fasync,
+        .llseek =       default_llseek,
 };
 
 
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index e6669fc3b804..99beebce8550 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -2116,12 +2116,15 @@ bad_config:
          * Otherwise, wait till the gadget driver hooks up.
          */
         if (!is_otg_enabled(musb) && is_host_enabled(musb)) {
+                struct usb_hcd  *hcd = musb_to_hcd(musb);
+
                 MUSB_HST_MODE(musb);
                 musb->xceiv->default_a = 1;
                 musb->xceiv->state = OTG_STATE_A_IDLE;
 
                 status = usb_add_hcd(musb_to_hcd(musb), -1, 0);
 
+                hcd->self.uses_pio_for_control = 1;
                 DBG(1, "%s mode, status %d, devctl %02x %c\n",
                         "HOST", status,
                         musb_readb(musb->mregs, MUSB_DEVCTL),
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index 36cfd060dbe5..9d6ade82b9f2 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -92,6 +92,59 @@
 
 /* ----------------------------------------------------------------------- */
 
+/* Maps the buffer to dma  */
+
+static inline void map_dma_buffer(struct musb_request *request,
+                                struct musb *musb)
+{
+        if (request->request.dma == DMA_ADDR_INVALID) {
+                request->request.dma = dma_map_single(
+                                musb->controller,
+                                request->request.buf,
+                                request->request.length,
+                                request->tx
+                                        ? DMA_TO_DEVICE
+                                        : DMA_FROM_DEVICE);
+                request->mapped = 1;
+        } else {
+                dma_sync_single_for_device(musb->controller,
+                        request->request.dma,
+                        request->request.length,
+                        request->tx
+                                ? DMA_TO_DEVICE
+                                : DMA_FROM_DEVICE);
+                request->mapped = 0;
+        }
+}
+
+/* Unmap the buffer from dma and maps it back to cpu */
+static inline void unmap_dma_buffer(struct musb_request *request,
+                                struct musb *musb)
+{
+        if (request->request.dma == DMA_ADDR_INVALID) {
+                DBG(20, "not unmapping a never mapped buffer\n");
+                return;
+        }
+        if (request->mapped) {
+                dma_unmap_single(musb->controller,
+                        request->request.dma,
+                        request->request.length,
+                        request->tx
+                                ? DMA_TO_DEVICE
+                                : DMA_FROM_DEVICE);
+                request->request.dma = DMA_ADDR_INVALID;
+                request->mapped = 0;
+        } else {
+                dma_sync_single_for_cpu(musb->controller,
+                        request->request.dma,
+                        request->request.length,
+                        request->tx
+                                ? DMA_TO_DEVICE
+                                : DMA_FROM_DEVICE);
+
+        }
+}
+
 /*
  * Immediately complete a request.
  *
@@ -119,24 +172,8 @@ __acquires(ep->musb->lock)
 
         ep->busy = 1;
         spin_unlock(&musb->lock);
-        if (is_dma_capable()) {
-                if (req->mapped) {
-                        dma_unmap_single(musb->controller,
-                                        req->request.dma,
-                                        req->request.length,
-                                        req->tx
-                                                ? DMA_TO_DEVICE
-                                                : DMA_FROM_DEVICE);
-                        req->request.dma = DMA_ADDR_INVALID;
-                        req->mapped = 0;
-                } else if (req->request.dma != DMA_ADDR_INVALID)
-                        dma_sync_single_for_cpu(musb->controller,
-                                        req->request.dma,
-                                        req->request.length,
-                                        req->tx
-                                                ? DMA_TO_DEVICE
-                                                : DMA_FROM_DEVICE);
-        }
+        if (is_dma_capable() && ep->dma)
+                unmap_dma_buffer(req, musb);
         if (request->status == 0)
                 DBG(5, "%s done request %p,  %d/%d\n",
                                 ep->end_point.name, request,
@@ -395,6 +432,13 @@ static void txstate(struct musb *musb, struct musb_request *req)
 #endif
 
         if (!use_dma) {
+                /*
+                 * Unmap the dma buffer back to cpu if dma channel
+                 * programming fails
+                 */
+                if (is_dma_capable() && musb_ep->dma)
+                        unmap_dma_buffer(req, musb);
+
                 musb_write_fifo(musb_ep->hw_ep, fifo_count,
                                 (u8 *) (request->buf + request->actual));
                 request->actual += fifo_count;
@@ -713,6 +757,21 @@ static void rxstate(struct musb *musb, struct musb_request *req)
                                         return;
                         }
 #endif
+                        /*
+                         * Unmap the dma buffer back to cpu if dma channel
+                         * programming fails. This buffer is mapped if the
+                         * channel allocation is successful
+                         */
+                         if (is_dma_capable() && musb_ep->dma) {
+                                unmap_dma_buffer(req, musb);
+
+                                /*
+                                 * Clear DMAENAB and AUTOCLEAR for the
+                                 * PIO mode transfer
+                                 */
+                                csr &= ~(MUSB_RXCSR_DMAENAB | MUSB_RXCSR_AUTOCLEAR);
+                                musb_writew(epio, MUSB_RXCSR, csr);
+                        }
 
                         musb_read_fifo(musb_ep->hw_ep, fifo_count, (u8 *)
                                         (request->buf + request->actual));
@@ -837,7 +896,9 @@ void musb_g_rx(struct musb *musb, u8 epnum)
                 if (!request)
                         return;
         }
+#if defined(CONFIG_USB_INVENTRA_DMA) || defined(CONFIG_USB_TUSB_OMAP_DMA)
 exit:
+#endif
         /* Analyze request */
         rxstate(musb, to_musb_request(request));
 }
@@ -1150,26 +1211,9 @@ static int musb_gadget_queue(struct usb_ep *ep, struct usb_request *req,
         request->epnum = musb_ep->current_epnum;
         request->tx = musb_ep->is_in;
 
-        if (is_dma_capable() && musb_ep->dma) {
-                if (request->request.dma == DMA_ADDR_INVALID) {
-                        request->request.dma = dma_map_single(
-                                        musb->controller,
-                                        request->request.buf,
-                                        request->request.length,
-                                        request->tx
-                                                ? DMA_TO_DEVICE
-                                                : DMA_FROM_DEVICE);
-                        request->mapped = 1;
-                } else {
-                        dma_sync_single_for_device(musb->controller,
-                                        request->request.dma,
-                                        request->request.length,
-                                        request->tx
-                                                ? DMA_TO_DEVICE
-                                                : DMA_FROM_DEVICE);
-                        request->mapped = 0;
-                }
-        } else
+        if (is_dma_capable() && musb_ep->dma)
+                map_dma_buffer(request, musb);
+        else
                 request->mapped = 0;
 
         spin_lock_irqsave(&musb->lock, lockflags);
@@ -1789,6 +1833,8 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
                 spin_unlock_irqrestore(&musb->lock, flags);
 
                 if (is_otg_enabled(musb)) {
+                        struct usb_hcd  *hcd = musb_to_hcd(musb);
+
                         DBG(3, "OTG startup...\n");
 
                         /* REVISIT:  funcall to other code, which also
@@ -1803,6 +1849,8 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
                                 musb->gadget_driver = NULL;
                                 musb->g.dev.driver = NULL;
                                 spin_unlock_irqrestore(&musb->lock, flags);
+                        } else {
+                                hcd->self.uses_pio_for_control = 1;
                         }
                 }
         }
diff --git a/drivers/usb/otg/langwell_otg.c b/drivers/usb/otg/langwell_otg.c
index bdc3ea66be69..9fea48264fa2 100644
--- a/drivers/usb/otg/langwell_otg.c
+++ b/drivers/usb/otg/langwell_otg.c
@@ -1896,7 +1896,7 @@ set_a_bus_req(struct device *dev, struct device_attribute *attr,
         }
         return count;
 }
-static DEVICE_ATTR(a_bus_req, S_IRUGO | S_IWUGO, get_a_bus_req, set_a_bus_req);
+static DEVICE_ATTR(a_bus_req, S_IRUGO | S_IWUSR, get_a_bus_req, set_a_bus_req);
 
 static ssize_t
 get_a_bus_drop(struct device *dev, struct device_attribute *attr, char *buf)
@@ -1942,8 +1942,7 @@ set_a_bus_drop(struct device *dev, struct device_attribute *attr,
         }
         return count;
 }
-static DEVICE_ATTR(a_bus_drop, S_IRUGO | S_IWUGO,
-        get_a_bus_drop, set_a_bus_drop);
+static DEVICE_ATTR(a_bus_drop, S_IRUGO | S_IWUSR, get_a_bus_drop, set_a_bus_drop);
 
 static ssize_t
 get_b_bus_req(struct device *dev, struct device_attribute *attr, char *buf)
@@ -1988,7 +1987,7 @@ set_b_bus_req(struct device *dev, struct device_attribute *attr,
         }
         return count;
 }
-static DEVICE_ATTR(b_bus_req, S_IRUGO | S_IWUGO, get_b_bus_req, set_b_bus_req);
+static DEVICE_ATTR(b_bus_req, S_IRUGO | S_IWUSR, get_b_bus_req, set_b_bus_req);
 
 static ssize_t
 set_a_clr_err(struct device *dev, struct device_attribute *attr,
@@ -2012,7 +2011,7 @@ set_a_clr_err(struct device *dev, struct device_attribute *attr,
         }
         return count;
 }
-static DEVICE_ATTR(a_clr_err, S_IWUGO, NULL, set_a_clr_err);
+static DEVICE_ATTR(a_clr_err, S_IWUSR, NULL, set_a_clr_err);
 
 static struct attribute *inputs_attrs[] = {
         &dev_attr_a_bus_req.attr,
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 76f8b3556672..6a50965e23f2 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -201,6 +201,7 @@ static struct usb_device_id id_table_combined [] = {
         { USB_DEVICE(FTDI_VID, FTDI_MTXORB_5_PID) },
         { USB_DEVICE(FTDI_VID, FTDI_MTXORB_6_PID) },
         { USB_DEVICE(FTDI_VID, FTDI_R2000KU_TRUE_RNG) },
+        { USB_DEVICE(FTDI_VID, FTDI_VARDAAN_PID) },
         { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0100_PID) },
         { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0101_PID) },
         { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0102_PID) },
@@ -696,6 +697,7 @@ static struct usb_device_id id_table_combined [] = {
                 .driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk },
         { USB_DEVICE(TELLDUS_VID, TELLDUS_TELLSTICK_PID) },
         { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_SERIAL_VX7_PID) },
+        { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_CT29B_PID) },
         { USB_DEVICE(FTDI_VID, FTDI_MAXSTREAM_PID) },
         { USB_DEVICE(FTDI_VID, FTDI_PHI_FISCO_PID) },
         { USB_DEVICE(TML_VID, TML_USB_SERIAL_PID) },
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index 263f62551197..1286f1e23d8c 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -114,6 +114,9 @@
 /* Lenz LI-USB Computer Interface. */
 #define FTDI_LENZ_LIUSB_PID     0xD780
 
+/* Vardaan Enterprises Serial Interface VEUSB422R3 */
+#define FTDI_VARDAAN_PID        0xF070
+
 /*
  * Xsens Technologies BV products (http://www.xsens.com).
  */
@@ -721,6 +724,7 @@
  */
 #define RTSYSTEMS_VID                   0x2100  /* Vendor ID */
 #define RTSYSTEMS_SERIAL_VX7_PID        0x9e52  /* Serial converter for VX-7 Radios using FT232RL */
+#define RTSYSTEMS_CT29B_PID             0x9e54  /* CT29B Radio Cable */
 
 /*
  * Bayer Ascensia Contour blood glucose meter USB-converter cable.
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 861223f2af6e..6954de50c0ff 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -51,6 +51,7 @@ static struct usb_driver usb_serial_driver = {
         .suspend =      usb_serial_suspend,
         .resume =       usb_serial_resume,
         .no_dynamic_id =        1,
+        .supports_autosuspend = 1,
 };
 
 /* There is no MODULE_DEVICE_TABLE for usbserial.c.  Instead
@@ -1343,6 +1344,8 @@ int usb_serial_register(struct usb_serial_driver *driver)
                 return -ENODEV;
 
         fixup_generic(driver);
+        if (driver->usb_driver)
+                driver->usb_driver->supports_autosuspend = 1;
 
         if (!driver->description)
                 driver->description = driver->driver.name;
diff --git a/drivers/usb/storage/sierra_ms.c b/drivers/usb/storage/sierra_ms.c
index 57fc2f532cab..ceba512f84d0 100644
--- a/drivers/usb/storage/sierra_ms.c
+++ b/drivers/usb/storage/sierra_ms.c
@@ -121,7 +121,7 @@ static ssize_t show_truinst(struct device *dev, struct device_attribute *attr,
         }
         return result;
 }
-static DEVICE_ATTR(truinst, S_IWUGO | S_IRUGO, show_truinst, NULL);
+static DEVICE_ATTR(truinst, S_IRUGO, show_truinst, NULL);
 
 int sierra_ms_init(struct us_data *us)
 {