9 files changed, 228 insertions, 90 deletions

diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
index 8c3a42ea910c..7eef9b33fde6 100644
--- a/drivers/usb/serial/Kconfig
+++ b/drivers/usb/serial/Kconfig
@@ -719,6 +719,13 @@ config USB_SERIAL_FLASHLOADER
           To compile this driver as a module, choose M here: the
           module will be called flashloader.
 
+config USB_SERIAL_SUUNTO
+        tristate "USB Suunto ANT+ driver"
+        help
+          Say Y here if you want to use the Suunto ANT+ USB device.
+
+          To compile this driver as a module, choose M here: the
+          module will be called suunto.
 
 config USB_SERIAL_DEBUG
         tristate "USB Debugging Device"
diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile
index f7130114488f..a14a870d993f 100644
--- a/drivers/usb/serial/Makefile
+++ b/drivers/usb/serial/Makefile
@@ -54,6 +54,7 @@ obj-$(CONFIG_USB_SERIAL_SIEMENS_MPI)		+= siemens_mpi.o
 obj-$(CONFIG_USB_SERIAL_SIERRAWIRELESS)         += sierra.o
 obj-$(CONFIG_USB_SERIAL_SPCP8X5)                += spcp8x5.o
 obj-$(CONFIG_USB_SERIAL_SSU100)                 += ssu100.o
+obj-$(CONFIG_USB_SERIAL_SUUNTO)                 += suunto.o
 obj-$(CONFIG_USB_SERIAL_SYMBOL)                 += symbolserial.o
 obj-$(CONFIG_USB_SERIAL_WWAN)                   += usb_wwan.o
 obj-$(CONFIG_USB_SERIAL_TI)                     += ti_usb_3410_5052.o
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index d6ef2f8da37d..0eae4ba3760e 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -53,6 +53,7 @@ static const struct usb_device_id id_table[] = {
         { USB_DEVICE(0x0489, 0xE000) }, /* Pirelli Broadband S.p.A, DP-L10 SIP/GSM Mobile */
         { USB_DEVICE(0x0489, 0xE003) }, /* Pirelli Broadband S.p.A, DP-L10 SIP/GSM Mobile */
         { USB_DEVICE(0x0745, 0x1000) }, /* CipherLab USB CCD Barcode Scanner 1000 */
+        { USB_DEVICE(0x0846, 0x1100) }, /* NetGear Managed Switch M4100 series, M5300 series, M7100 series */
         { USB_DEVICE(0x08e6, 0x5501) }, /* Gemalto Prox-PU/CU contactless smartcard reader */
         { USB_DEVICE(0x08FD, 0x000A) }, /* Digianswer A/S , ZigBee/802.15.4 MAC Device */
         { USB_DEVICE(0x0BED, 0x1100) }, /* MEI (TM) Cashflow-SC Bill/Voucher Acceptor */
@@ -118,6 +119,8 @@ static const struct usb_device_id id_table[] = {
         { USB_DEVICE(0x10C4, 0x85F8) }, /* Virtenio Preon32 */
         { USB_DEVICE(0x10C4, 0x8664) }, /* AC-Services CAN-IF */
         { USB_DEVICE(0x10C4, 0x8665) }, /* AC-Services OBD-IF */
+        { USB_DEVICE(0x10C4, 0x88A4) }, /* MMB Networks ZigBee USB Device */
+        { USB_DEVICE(0x10C4, 0x88A5) }, /* Planet Innovation Ingeni ZigBee USB Device */
         { USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */
         { USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */
         { USB_DEVICE(0x10C4, 0xEA70) }, /* Silicon Labs factory default */
@@ -148,6 +151,7 @@ static const struct usb_device_id id_table[] = {
         { USB_DEVICE(0x17F4, 0xAAAA) }, /* Wavesense Jazz blood glucose meter */
         { USB_DEVICE(0x1843, 0x0200) }, /* Vaisala USB Instrument Cable */
         { USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */
+        { USB_DEVICE(0x1ADB, 0x0001) }, /* Schweitzer Engineering C662 Cable */
         { USB_DEVICE(0x1BE3, 0x07A6) }, /* WAGO 750-923 USB Service Cable */
         { USB_DEVICE(0x1E29, 0x0102) }, /* Festo CPX-USB */
         { USB_DEVICE(0x1E29, 0x0501) }, /* Festo CMSP */
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 7260ec660347..b65e657c641d 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -735,9 +735,34 @@ static struct usb_device_id id_table_combined [] = {
         { USB_DEVICE(FTDI_VID, FTDI_NDI_AURORA_SCU_PID),
                 .driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk },
         { USB_DEVICE(TELLDUS_VID, TELLDUS_TELLSTICK_PID) },
-        { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_SERIAL_VX7_PID) },
-        { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_CT29B_PID) },
-        { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_RTS01_PID) },
+        { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_S03_PID) },
+        { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_59_PID) },
+        { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_57A_PID) },
+        { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_57B_PID) },
+        { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_29A_PID) },
+        { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_29B_PID) },
+        { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_29F_PID) },
+        { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_62B_PID) },
+        { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_S01_PID) },
+        { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_63_PID) },
+        { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_29C_PID) },
+        { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_81B_PID) },
+        { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_82B_PID) },
+        { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_K5D_PID) },
+        { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_K4Y_PID) },
+        { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_K5G_PID) },
+        { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_S05_PID) },
+        { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_60_PID) },
+        { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_61_PID) },
+        { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_62_PID) },
+        { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_63B_PID) },
+        { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_64_PID) },
+        { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_65_PID) },
+        { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_92_PID) },
+        { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_92D_PID) },
+        { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_W5R_PID) },
+        { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_A5R_PID) },
+        { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_PW1_PID) },
         { USB_DEVICE(FTDI_VID, FTDI_MAXSTREAM_PID) },
         { USB_DEVICE(FTDI_VID, FTDI_PHI_FISCO_PID) },
         { USB_DEVICE(TML_VID, TML_USB_SERIAL_PID) },
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index 6dd79253205d..1b8af461b522 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -815,11 +815,35 @@
 /*
  * RT Systems programming cables for various ham radios
  */
-#define RTSYSTEMS_VID                   0x2100  /* Vendor ID */
-#define RTSYSTEMS_SERIAL_VX7_PID        0x9e52  /* Serial converter for VX-7 Radios using FT232RL */
-#define RTSYSTEMS_CT29B_PID             0x9e54  /* CT29B Radio Cable */
-#define RTSYSTEMS_RTS01_PID             0x9e57  /* USB-RTS01 Radio Cable */
-
+#define RTSYSTEMS_VID           0x2100  /* Vendor ID */
+#define RTSYSTEMS_USB_S03_PID   0x9001  /* RTS-03 USB to Serial Adapter */
+#define RTSYSTEMS_USB_59_PID    0x9e50  /* USB-59 USB to 8 pin plug */
+#define RTSYSTEMS_USB_57A_PID   0x9e51  /* USB-57A USB to 4pin 3.5mm plug */
+#define RTSYSTEMS_USB_57B_PID   0x9e52  /* USB-57B USB to extended 4pin 3.5mm plug */
+#define RTSYSTEMS_USB_29A_PID   0x9e53  /* USB-29A USB to 3.5mm stereo plug */
+#define RTSYSTEMS_USB_29B_PID   0x9e54  /* USB-29B USB to 6 pin mini din */
+#define RTSYSTEMS_USB_29F_PID   0x9e55  /* USB-29F USB to 6 pin modular plug */
+#define RTSYSTEMS_USB_62B_PID   0x9e56  /* USB-62B USB to 8 pin mini din plug*/
+#define RTSYSTEMS_USB_S01_PID   0x9e57  /* USB-RTS01 USB to 3.5 mm stereo plug*/
+#define RTSYSTEMS_USB_63_PID    0x9e58  /* USB-63 USB to 9 pin female*/
+#define RTSYSTEMS_USB_29C_PID   0x9e59  /* USB-29C USB to 4 pin modular plug*/
+#define RTSYSTEMS_USB_81B_PID   0x9e5A  /* USB-81 USB to 8 pin mini din plug*/
+#define RTSYSTEMS_USB_82B_PID   0x9e5B  /* USB-82 USB to 2.5 mm stereo plug*/
+#define RTSYSTEMS_USB_K5D_PID   0x9e5C  /* USB-K5D USB to 8 pin modular plug*/
+#define RTSYSTEMS_USB_K4Y_PID   0x9e5D  /* USB-K4Y USB to 2.5/3.5 mm plugs*/
+#define RTSYSTEMS_USB_K5G_PID   0x9e5E  /* USB-K5G USB to 8 pin modular plug*/
+#define RTSYSTEMS_USB_S05_PID   0x9e5F  /* USB-RTS05 USB to 2.5 mm stereo plug*/
+#define RTSYSTEMS_USB_60_PID    0x9e60  /* USB-60 USB to 6 pin din*/
+#define RTSYSTEMS_USB_61_PID    0x9e61  /* USB-61 USB to 6 pin mini din*/
+#define RTSYSTEMS_USB_62_PID    0x9e62  /* USB-62 USB to 8 pin mini din*/
+#define RTSYSTEMS_USB_63B_PID   0x9e63  /* USB-63 USB to 9 pin female*/
+#define RTSYSTEMS_USB_64_PID    0x9e64  /* USB-64 USB to 9 pin male*/
+#define RTSYSTEMS_USB_65_PID    0x9e65  /* USB-65 USB to 9 pin female null modem*/
+#define RTSYSTEMS_USB_92_PID    0x9e66  /* USB-92 USB to 12 pin plug*/
+#define RTSYSTEMS_USB_92D_PID   0x9e67  /* USB-92D USB to 12 pin plug data*/
+#define RTSYSTEMS_USB_W5R_PID   0x9e68  /* USB-W5R USB to 8 pin modular plug*/
+#define RTSYSTEMS_USB_A5R_PID   0x9e69  /* USB-A5R USB to 8 pin modular plug*/
+#define RTSYSTEMS_USB_PW1_PID   0x9e6A  /* USB-PW1 USB to 8 pin modular plug*/
 
 /*
  * Physik Instrumente
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 0a818b238508..d953d674f222 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -183,7 +183,10 @@
 #define LED_ON_MS       500
 #define LED_OFF_MS      500
 
-static int device_type;
+enum mos7840_flag {
+        MOS7840_FLAG_CTRL_BUSY,
+        MOS7840_FLAG_LED_BUSY,
+};
 
 static const struct usb_device_id id_table[] = {
         {USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7840)},
@@ -238,9 +241,12 @@ struct moschip_port {
 
         /* For device(s) with LED indicator */
         bool has_led;
-        bool led_flag;
         struct timer_list led_timer1;   /* Timer for LED on */
         struct timer_list led_timer2;   /* Timer for LED off */
+        struct urb *led_urb;
+        struct usb_ctrlrequest *led_dr;
+
+        unsigned long flags;
 };
 
 /*
@@ -460,10 +466,10 @@ static void mos7840_control_callback(struct urb *urb)
         case -ESHUTDOWN:
                 /* this urb is terminated, clean up */
                 dev_dbg(dev, "%s - urb shutting down with status: %d\n", __func__, status);
-                return;
+                goto out;
         default:
                 dev_dbg(dev, "%s - nonzero urb status received: %d\n", __func__, status);
-                return;
+                goto out;
         }
 
         dev_dbg(dev, "%s urb buffer size is %d\n", __func__, urb->actual_length);
@@ -476,6 +482,8 @@ static void mos7840_control_callback(struct urb *urb)
                 mos7840_handle_new_msr(mos7840_port, regval);
         else if (mos7840_port->MsrLsr == 1)
                 mos7840_handle_new_lsr(mos7840_port, regval);
+out:
+        clear_bit_unlock(MOS7840_FLAG_CTRL_BUSY, &mos7840_port->flags);
 }
 
 static int mos7840_get_reg(struct moschip_port *mcs, __u16 Wval, __u16 reg,
@@ -486,6 +494,9 @@ static int mos7840_get_reg(struct moschip_port *mcs, __u16 Wval, __u16 reg,
         unsigned char *buffer = mcs->ctrl_buf;
         int ret;
 
+        if (test_and_set_bit_lock(MOS7840_FLAG_CTRL_BUSY, &mcs->flags))
+                return -EBUSY;
+
         dr->bRequestType = MCS_RD_RTYPE;
         dr->bRequest = MCS_RDREQ;
         dr->wValue = cpu_to_le16(Wval); /* 0 */
@@ -497,6 +508,9 @@ static int mos7840_get_reg(struct moschip_port *mcs, __u16 Wval, __u16 reg,
                              mos7840_control_callback, mcs);
         mcs->control_urb->transfer_buffer_length = 2;
         ret = usb_submit_urb(mcs->control_urb, GFP_ATOMIC);
+        if (ret)
+                clear_bit_unlock(MOS7840_FLAG_CTRL_BUSY, &mcs->flags);
+
         return ret;
 }
 
@@ -523,7 +537,7 @@ static void mos7840_set_led_async(struct moschip_port *mcs, __u16 wval,
                                 __u16 reg)
 {
         struct usb_device *dev = mcs->port->serial->dev;
-        struct usb_ctrlrequest *dr = mcs->dr;
+        struct usb_ctrlrequest *dr = mcs->led_dr;
 
         dr->bRequestType = MCS_WR_RTYPE;
         dr->bRequest = MCS_WRREQ;
@@ -531,10 +545,10 @@ static void mos7840_set_led_async(struct moschip_port *mcs, __u16 wval,
         dr->wIndex = cpu_to_le16(reg);
         dr->wLength = cpu_to_le16(0);
 
-        usb_fill_control_urb(mcs->control_urb, dev, usb_sndctrlpipe(dev, 0),
+        usb_fill_control_urb(mcs->led_urb, dev, usb_sndctrlpipe(dev, 0),
                 (unsigned char *)dr, NULL, 0, mos7840_set_led_callback, NULL);
 
-        usb_submit_urb(mcs->control_urb, GFP_ATOMIC);
+        usb_submit_urb(mcs->led_urb, GFP_ATOMIC);
 }
 
 static void mos7840_set_led_sync(struct usb_serial_port *port, __u16 reg,
@@ -560,7 +574,19 @@ static void mos7840_led_flag_off(unsigned long arg)
 {
         struct moschip_port *mcs = (struct moschip_port *) arg;
 
-        mcs->led_flag = false;
+        clear_bit_unlock(MOS7840_FLAG_LED_BUSY, &mcs->flags);
+}
+
+static void mos7840_led_activity(struct usb_serial_port *port)
+{
+        struct moschip_port *mos7840_port = usb_get_serial_port_data(port);
+
+        if (test_and_set_bit_lock(MOS7840_FLAG_LED_BUSY, &mos7840_port->flags))
+                return;
+
+        mos7840_set_led_async(mos7840_port, 0x0301, MODEM_CONTROL_REGISTER);
+        mod_timer(&mos7840_port->led_timer1,
+                                jiffies + msecs_to_jiffies(LED_ON_MS));
 }
 
 /*****************************************************************************
@@ -758,14 +784,8 @@ static void mos7840_bulk_in_callback(struct urb *urb)
                 return;
         }
 
-        /* Turn on LED */
-        if (mos7840_port->has_led && !mos7840_port->led_flag) {
-                mos7840_port->led_flag = true;
-                mos7840_set_led_async(mos7840_port, 0x0301,
-                                        MODEM_CONTROL_REGISTER);
-                mod_timer(&mos7840_port->led_timer1,
-                                jiffies + msecs_to_jiffies(LED_ON_MS));
-        }
+        if (mos7840_port->has_led)
+                mos7840_led_activity(port);
 
         mos7840_port->read_urb_busy = true;
         retval = usb_submit_urb(mos7840_port->read_urb, GFP_ATOMIC);
@@ -816,18 +836,6 @@ static void mos7840_bulk_out_data_callback(struct urb *urb)
 /************************************************************************/
 /*       D R I V E R  T T Y  I N T E R F A C E  F U N C T I O N S       */
 /************************************************************************/
-#ifdef MCSSerialProbe
-static int mos7840_serial_probe(struct usb_serial *serial,
-                                const struct usb_device_id *id)
-{
-
-        /*need to implement the mode_reg reading and updating\
-           structures usb_serial_ device_type\
-           (i.e num_ports, num_bulkin,bulkout etc) */
-        /* Also we can update the changes  attach */
-        return 1;
-}
-#endif
 
 /*****************************************************************************
  * mos7840_open
@@ -905,20 +913,20 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port)
         status = mos7840_get_reg_sync(port, mos7840_port->SpRegOffset, &Data);
         if (status < 0) {
                 dev_dbg(&port->dev, "Reading Spreg failed\n");
-                return -1;
+                goto err;
         }
         Data |= 0x80;
         status = mos7840_set_reg_sync(port, mos7840_port->SpRegOffset, Data);
         if (status < 0) {
                 dev_dbg(&port->dev, "writing Spreg failed\n");
-                return -1;
+                goto err;
         }
 
         Data &= ~0x80;
         status = mos7840_set_reg_sync(port, mos7840_port->SpRegOffset, Data);
         if (status < 0) {
                 dev_dbg(&port->dev, "writing Spreg failed\n");
-                return -1;
+                goto err;
         }
         /* End of block to be checked */
 
@@ -927,7 +935,7 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port)
                                                                         &Data);
         if (status < 0) {
                 dev_dbg(&port->dev, "Reading Controlreg failed\n");
-                return -1;
+                goto err;
         }
         Data |= 0x08;           /* Driver done bit */
         Data |= 0x20;           /* rx_disable */
@@ -935,7 +943,7 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port)
                                 mos7840_port->ControlRegOffset, Data);
         if (status < 0) {
                 dev_dbg(&port->dev, "writing Controlreg failed\n");
-                return -1;
+                goto err;
         }
         /* do register settings here */
         /* Set all regs to the device default values. */
@@ -946,21 +954,21 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port)
         status = mos7840_set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data);
         if (status < 0) {
                 dev_dbg(&port->dev, "disabling interrupts failed\n");
-                return -1;
+                goto err;
         }
         /* Set FIFO_CONTROL_REGISTER to the default value */
         Data = 0x00;
         status = mos7840_set_uart_reg(port, FIFO_CONTROL_REGISTER, Data);
         if (status < 0) {
                 dev_dbg(&port->dev, "Writing FIFO_CONTROL_REGISTER  failed\n");
-                return -1;
+                goto err;
         }
 
         Data = 0xcf;
         status = mos7840_set_uart_reg(port, FIFO_CONTROL_REGISTER, Data);
         if (status < 0) {
                 dev_dbg(&port->dev, "Writing FIFO_CONTROL_REGISTER  failed\n");
-                return -1;
+                goto err;
         }
 
         Data = 0x03;
@@ -1103,6 +1111,15 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port)
         /* mos7840_change_port_settings(mos7840_port,old_termios); */
 
         return 0;
+err:
+        for (j = 0; j < NUM_URBS; ++j) {
+                urb = mos7840_port->write_urb_pool[j];
+                if (!urb)
+                        continue;
+                kfree(urb->transfer_buffer);
+                usb_free_urb(urb);
+        }
+        return status;
 }
 
 /*****************************************************************************
@@ -1445,13 +1462,8 @@ static int mos7840_write(struct tty_struct *tty, struct usb_serial_port *port,
         data1 = urb->transfer_buffer;
         dev_dbg(&port->dev, "bulkout endpoint is %d\n", port->bulk_out_endpointAddress);
 
-        /* Turn on LED */
-        if (mos7840_port->has_led && !mos7840_port->led_flag) {
-                mos7840_port->led_flag = true;
-                mos7840_set_led_sync(port, MODEM_CONTROL_REGISTER, 0x0301);
-                mod_timer(&mos7840_port->led_timer1,
-                                jiffies + msecs_to_jiffies(LED_ON_MS));
-        }
+        if (mos7840_port->has_led)
+                mos7840_led_activity(port);
 
         /* send it down the pipe */
         status = usb_submit_urb(urb, GFP_ATOMIC);
@@ -2178,38 +2190,48 @@ static int mos7810_check(struct usb_serial *serial)
         return 0;
 }
 
-static int mos7840_calc_num_ports(struct usb_serial *serial)
+static int mos7840_probe(struct usb_serial *serial,
+                                const struct usb_device_id *id)
 {
-        __u16 data = 0x00;
+        u16 product = serial->dev->descriptor.idProduct;
         u8 *buf;
-        int mos7840_num_ports;
+        int device_type;
+
+        if (product == MOSCHIP_DEVICE_ID_7810 ||
+                product == MOSCHIP_DEVICE_ID_7820) {
+                device_type = product;
+                goto out;
+        }
 
         buf = kzalloc(VENDOR_READ_LENGTH, GFP_KERNEL);
-        if (buf) {
-                usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
+        if (!buf)
+                return -ENOMEM;
+
+        usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
                         MCS_RDREQ, MCS_RD_RTYPE, 0, GPIO_REGISTER, buf,
                         VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT);
-                data = *buf;
-                kfree(buf);
-        }
 
-        if (serial->dev->descriptor.idProduct == MOSCHIP_DEVICE_ID_7810 ||
-                serial->dev->descriptor.idProduct == MOSCHIP_DEVICE_ID_7820) {
-                device_type = serial->dev->descriptor.idProduct;
-        } else {
-                /* For a MCS7840 device GPIO0 must be set to 1 */
-                if ((data & 0x01) == 1)
-                        device_type = MOSCHIP_DEVICE_ID_7840;
-                else if (mos7810_check(serial))
-                        device_type = MOSCHIP_DEVICE_ID_7810;
-                else
-                        device_type = MOSCHIP_DEVICE_ID_7820;
-        }
+        /* For a MCS7840 device GPIO0 must be set to 1 */
+        if (buf[0] & 0x01)
+                device_type = MOSCHIP_DEVICE_ID_7840;
+        else if (mos7810_check(serial))
+                device_type = MOSCHIP_DEVICE_ID_7810;
+        else
+                device_type = MOSCHIP_DEVICE_ID_7820;
+
+        kfree(buf);
+out:
+        usb_set_serial_data(serial, (void *)(unsigned long)device_type);
+
+        return 0;
+}
+
+static int mos7840_calc_num_ports(struct usb_serial *serial)
+{
+        int device_type = (unsigned long)usb_get_serial_data(serial);
+        int mos7840_num_ports;
 
         mos7840_num_ports = (device_type >> 4) & 0x000F;
-        serial->num_bulk_in = mos7840_num_ports;
-        serial->num_bulk_out = mos7840_num_ports;
-        serial->num_ports = mos7840_num_ports;
 
         return mos7840_num_ports;
 }
@@ -2217,6 +2239,7 @@ static int mos7840_calc_num_ports(struct usb_serial *serial)
 static int mos7840_port_probe(struct usb_serial_port *port)
 {
         struct usb_serial *serial = port->serial;
+        int device_type = (unsigned long)usb_get_serial_data(serial);
         struct moschip_port *mos7840_port;
         int status;
         int pnum;
@@ -2392,6 +2415,14 @@ static int mos7840_port_probe(struct usb_serial_port *port)
         if (device_type == MOSCHIP_DEVICE_ID_7810) {
                 mos7840_port->has_led = true;
 
+                mos7840_port->led_urb = usb_alloc_urb(0, GFP_KERNEL);
+                mos7840_port->led_dr = kmalloc(sizeof(*mos7840_port->led_dr),
+                                                                GFP_KERNEL);
+                if (!mos7840_port->led_urb || !mos7840_port->led_dr) {
+                        status = -ENOMEM;
+                        goto error;
+                }
+
                 init_timer(&mos7840_port->led_timer1);
                 mos7840_port->led_timer1.function = mos7840_led_off;
                 mos7840_port->led_timer1.expires =
@@ -2404,8 +2435,6 @@ static int mos7840_port_probe(struct usb_serial_port *port)
                         jiffies + msecs_to_jiffies(LED_OFF_MS);
                 mos7840_port->led_timer2.data = (unsigned long)mos7840_port;
 
-                mos7840_port->led_flag = false;
-
                 /* Turn off LED */
                 mos7840_set_led_sync(port, MODEM_CONTROL_REGISTER, 0x0300);
         }
@@ -2427,6 +2456,8 @@ out:
         }
         return 0;
 error:
+        kfree(mos7840_port->led_dr);
+        usb_free_urb(mos7840_port->led_urb);
         kfree(mos7840_port->dr);
         kfree(mos7840_port->ctrl_buf);
         usb_free_urb(mos7840_port->control_urb);
@@ -2447,6 +2478,10 @@ static int mos7840_port_remove(struct usb_serial_port *port)
 
                 del_timer_sync(&mos7840_port->led_timer1);
                 del_timer_sync(&mos7840_port->led_timer2);
+
+                usb_kill_urb(mos7840_port->led_urb);
+                usb_free_urb(mos7840_port->led_urb);
+                kfree(mos7840_port->led_dr);
         }
         usb_kill_urb(mos7840_port->control_urb);
         usb_free_urb(mos7840_port->control_urb);
@@ -2473,9 +2508,7 @@ static struct usb_serial_driver moschip7840_4port_device = {
         .throttle = mos7840_throttle,
         .unthrottle = mos7840_unthrottle,
         .calc_num_ports = mos7840_calc_num_ports,
-#ifdef MCSSerialProbe
-        .probe = mos7840_serial_probe,
-#endif
+        .probe = mos7840_probe,
         .ioctl = mos7840_ioctl,
         .set_termios = mos7840_set_termios,
         .break_ctl = mos7840_break,
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 5dd857de05b0..1cf6f125f5f0 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -341,17 +341,12 @@ static void option_instat_callback(struct urb *urb);
 #define OLIVETTI_VENDOR_ID                      0x0b3c
 #define OLIVETTI_PRODUCT_OLICARD100             0xc000
 #define OLIVETTI_PRODUCT_OLICARD145             0xc003
+#define OLIVETTI_PRODUCT_OLICARD200             0xc005
 
 /* Celot products */
 #define CELOT_VENDOR_ID                         0x211f
 #define CELOT_PRODUCT_CT680M                    0x6801
 
-/* ONDA Communication vendor id */
-#define ONDA_VENDOR_ID       0x1ee8
-
-/* ONDA MT825UP HSDPA 14.2 modem */
-#define ONDA_MT825UP         0x000b
-
 /* Samsung products */
 #define SAMSUNG_VENDOR_ID                       0x04e8
 #define SAMSUNG_PRODUCT_GT_B3730                0x6889
@@ -444,7 +439,8 @@ static void option_instat_callback(struct urb *urb);
 
 /* Hyundai Petatel Inc. products */
 #define PETATEL_VENDOR_ID                       0x1ff4
-#define PETATEL_PRODUCT_NP10T                   0x600e
+#define PETATEL_PRODUCT_NP10T_600A              0x600a
+#define PETATEL_PRODUCT_NP10T_600E              0x600e
 
 /* TP-LINK Incorporated products */
 #define TPLINK_VENDOR_ID                        0x2357
@@ -782,6 +778,7 @@ static const struct usb_device_id option_ids[] = {
         { USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_PRODUCT_KPC650) },
         { USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_PRODUCT_KPC680) },
         { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6613)}, /* Onda H600/ZTE MF330 */
+        { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x0023)}, /* ONYX 3G device */
         { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x9000)}, /* SIMCom SIM5218 */
         { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6280) }, /* BP3-USB & BP3-EXT HSDPA */
         { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6008) },
@@ -817,7 +814,8 @@ static const struct usb_device_id option_ids[] = {
         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0017, 0xff, 0xff, 0xff),
                 .driver_info = (kernel_ulong_t)&net_intf3_blacklist },
         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0018, 0xff, 0xff, 0xff) },
-        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0019, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0019, 0xff, 0xff, 0xff),
+                .driver_info = (kernel_ulong_t)&net_intf3_blacklist },
         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0020, 0xff, 0xff, 0xff) },
         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0021, 0xff, 0xff, 0xff),
                 .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
@@ -1256,8 +1254,8 @@ static const struct usb_device_id option_ids[] = {
 
         { USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD100) },
         { USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD145) },
+        { USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD200) },
         { USB_DEVICE(CELOT_VENDOR_ID, CELOT_PRODUCT_CT680M) }, /* CT-650 CDMA 450 1xEVDO modem */
-        { USB_DEVICE(ONDA_VENDOR_ID, ONDA_MT825UP) }, /* ONDA MT825UP modem */
         { USB_DEVICE_AND_INTERFACE_INFO(SAMSUNG_VENDOR_ID, SAMSUNG_PRODUCT_GT_B3730, USB_CLASS_CDC_DATA, 0x00, 0x00) }, /* Samsung GT-B3730 LTE USB modem.*/
         { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEM600) },
         { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEM610) },
@@ -1329,9 +1327,12 @@ static const struct usb_device_id option_ids[] = {
         { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_DC_4COM2, 0xff, 0x02, 0x01) },
         { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_DC_4COM2, 0xff, 0x00, 0x00) },
         { USB_DEVICE(CELLIENT_VENDOR_ID, CELLIENT_PRODUCT_MEN200) },
-        { USB_DEVICE(PETATEL_VENDOR_ID, PETATEL_PRODUCT_NP10T) },
+        { USB_DEVICE(PETATEL_VENDOR_ID, PETATEL_PRODUCT_NP10T_600A) },
+        { USB_DEVICE(PETATEL_VENDOR_ID, PETATEL_PRODUCT_NP10T_600E) },
         { USB_DEVICE(TPLINK_VENDOR_ID, TPLINK_PRODUCT_MA180),
           .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+        { USB_DEVICE(TPLINK_VENDOR_ID, 0x9000),                                 /* TP-Link MA260 */
+          .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
         { USB_DEVICE(CHANGHONG_VENDOR_ID, CHANGHONG_PRODUCT_CH690) },
         { USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x7d01, 0xff, 0x02, 0x01) },    /* D-Link DWM-156 (variant) */
         { USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x7d01, 0xff, 0x00, 0x00) },    /* D-Link DWM-156 (variant) */
@@ -1339,6 +1340,8 @@ static const struct usb_device_id option_ids[] = {
         { USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x7d02, 0xff, 0x00, 0x00) },
         { USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x7d03, 0xff, 0x02, 0x01) },
         { USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x7d03, 0xff, 0x00, 0x00) },
+        { USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e01, 0xff, 0xff, 0xff) }, /* D-Link DWM-152/C1 */
+        { USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e02, 0xff, 0xff, 0xff) }, /* D-Link DWM-156/C1 */
         { } /* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, option_ids);
diff --git a/drivers/usb/serial/suunto.c b/drivers/usb/serial/suunto.c
new file mode 100644
index 000000000000..2248e7a7d5ad
--- /dev/null
+++ b/drivers/usb/serial/suunto.c
@@ -0,0 +1,41 @@
+/*
+ * Suunto ANT+ USB Driver
+ *
+ * Copyright (C) 2013 Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+ * Copyright (C) 2013 Linux Foundation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation only.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/tty.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+#include <linux/uaccess.h>
+
+static const struct usb_device_id id_table[] = {
+        { USB_DEVICE(0x0fcf, 0x1008) },
+        { },
+};
+MODULE_DEVICE_TABLE(usb, id_table);
+
+static struct usb_serial_driver suunto_device = {
+        .driver = {
+                .owner =        THIS_MODULE,
+                .name =         KBUILD_MODNAME,
+        },
+        .id_table =             id_table,
+        .num_ports =            1,
+};
+
+static struct usb_serial_driver * const serial_drivers[] = {
+        &suunto_device,
+        NULL,
+};
+
+module_usb_serial_driver(serial_drivers, id_table);
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index 7182bb774b79..375b5a400b6f 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -371,7 +371,7 @@ static int ti_startup(struct usb_serial *serial)
         usb_set_serial_data(serial, tdev);
 
         /* determine device type */
-        if (usb_match_id(serial->interface, ti_id_table_3410))
+        if (serial->type == &ti_1port_device)
                 tdev->td_is_3410 = 1;
         dev_dbg(&dev->dev, "%s - device type is %s\n", __func__,
                 tdev->td_is_3410 ? "3410" : "5052");