5 files changed, 44 insertions, 13 deletions

diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c
index 5cdb9d912275..18e875b92e00 100644
--- a/drivers/usb/serial/ark3116.c
+++ b/drivers/usb/serial/ark3116.c
@@ -42,7 +42,7 @@ static int debug;
  * Version information
  */
 
-#define DRIVER_VERSION "v0.6"
+#define DRIVER_VERSION "v0.7"
 #define DRIVER_AUTHOR "Bart Hartgers <bart.hartgers+ark3116@gmail.com>"
 #define DRIVER_DESC "USB ARK3116 serial/IrDA driver"
 #define DRIVER_DEV_DESC "ARK3116 RS232/IrDA"
@@ -380,10 +380,6 @@ static int ark3116_open(struct tty_struct *tty, struct usb_serial_port *port)
                 goto err_out;
         }
 
-        /* setup termios */
-        if (tty)
-                ark3116_set_termios(tty, port, NULL);
-
         /* remove any data still left: also clears error state */
         ark3116_read_reg(serial, UART_RX, buf);
 
@@ -406,6 +402,10 @@ static int ark3116_open(struct tty_struct *tty, struct usb_serial_port *port)
         /* enable DMA */
         ark3116_write_reg(port->serial, UART_FCR, UART_FCR_DMA_SELECT);
 
+        /* setup termios */
+        if (tty)
+                ark3116_set_termios(tty, port, NULL);
+
 err_out:
         kfree(buf);
         return result;
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 8fe034d2d3e7..bd4298bb6750 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -2104,13 +2104,19 @@ static void ftdi_set_termios(struct tty_struct *tty,
 
         cflag = termios->c_cflag;
 
-        /* FIXME -For this cut I don't care if the line is really changing or
-           not  - so just do the change regardless  - should be able to
-           compare old_termios and tty->termios */
+        if (old_termios->c_cflag == termios->c_cflag
+            && old_termios->c_ispeed == termios->c_ispeed
+            && old_termios->c_ospeed == termios->c_ospeed)
+                goto no_c_cflag_changes;
+
         /* NOTE These routines can get interrupted by
            ftdi_sio_read_bulk_callback  - need to examine what this means -
            don't see any problems yet */
 
+        if ((old_termios->c_cflag & (CSIZE|PARODD|PARENB|CMSPAR|CSTOPB)) ==
+            (termios->c_cflag & (CSIZE|PARODD|PARENB|CMSPAR|CSTOPB)))
+                goto no_data_parity_stop_changes;
+
         /* Set number of data bits, parity, stop bits */
 
         urb_value = 0;
@@ -2151,6 +2157,7 @@ static void ftdi_set_termios(struct tty_struct *tty,
         }
 
         /* Now do the baudrate */
+no_data_parity_stop_changes:
         if ((cflag & CBAUD) == B0) {
                 /* Disable flow control */
                 if (usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
@@ -2178,6 +2185,7 @@ static void ftdi_set_termios(struct tty_struct *tty,
 
         /* Set flow control */
         /* Note device also supports DTR/CD (ugh) and Xon/Xoff in hardware */
+no_c_cflag_changes:
         if (cflag & CRTSCTS) {
                 dbg("%s Setting to CRTSCTS flow control", __func__);
                 if (usb_control_msg(dev,
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 89ae1f65e1b1..d865878c9f97 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -156,6 +156,7 @@ static void option_instat_callback(struct urb *urb);
 #define HUAWEI_PRODUCT_K4511                    0x14CC
 #define HUAWEI_PRODUCT_ETS1220                  0x1803
 #define HUAWEI_PRODUCT_E353                     0x1506
+#define HUAWEI_PRODUCT_E173S                    0x1C05
 
 #define QUANTA_VENDOR_ID                        0x0408
 #define QUANTA_PRODUCT_Q101                     0xEA02
@@ -316,6 +317,9 @@ static void option_instat_callback(struct urb *urb);
 #define ZTE_PRODUCT_AC8710                      0xfff1
 #define ZTE_PRODUCT_AC2726                      0xfff5
 #define ZTE_PRODUCT_AC8710T                     0xffff
+#define ZTE_PRODUCT_MC2718                      0xffe8
+#define ZTE_PRODUCT_AD3812                      0xffeb
+#define ZTE_PRODUCT_MC2716                      0xffed
 
 #define BENQ_VENDOR_ID                          0x04a5
 #define BENQ_PRODUCT_H10                        0x4068
@@ -468,6 +472,10 @@ static void option_instat_callback(struct urb *urb);
 #define YUGA_PRODUCT_CLU528                     0x260D
 #define YUGA_PRODUCT_CLU526                     0x260F
 
+/* Viettel products */
+#define VIETTEL_VENDOR_ID                       0x2262
+#define VIETTEL_PRODUCT_VT1000                  0x0002
+
 /* some devices interfaces need special handling due to a number of reasons */
 enum option_blacklist_reason {
                 OPTION_BLACKLIST_NONE = 0,
@@ -500,6 +508,18 @@ static const struct option_blacklist_info zte_k3765_z_blacklist = {
         .reserved = BIT(4),
 };
 
+static const struct option_blacklist_info zte_ad3812_z_blacklist = {
+        .sendsetup = BIT(0) | BIT(1) | BIT(2),
+};
+
+static const struct option_blacklist_info zte_mc2718_z_blacklist = {
+        .sendsetup = BIT(1) | BIT(2) | BIT(3) | BIT(4),
+};
+
+static const struct option_blacklist_info zte_mc2716_z_blacklist = {
+        .sendsetup = BIT(1) | BIT(2) | BIT(3),
+};
+
 static const struct option_blacklist_info huawei_cdc12_blacklist = {
         .reserved = BIT(1) | BIT(2),
 };
@@ -622,6 +642,7 @@ static const struct usb_device_id option_ids[] = {
         { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143D, 0xff, 0xff, 0xff) },
         { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143E, 0xff, 0xff, 0xff) },
         { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143F, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E173S, 0xff, 0xff, 0xff) },
         { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4505, 0xff, 0xff, 0xff),
                 .driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist },
         { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3765, 0xff, 0xff, 0xff),
@@ -1043,6 +1064,12 @@ static const struct usb_device_id option_ids[] = {
         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710, 0xff, 0xff, 0xff) },
         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC2726, 0xff, 0xff, 0xff) },
         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710T, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MC2718, 0xff, 0xff, 0xff),
+         .driver_info = (kernel_ulong_t)&zte_mc2718_z_blacklist },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AD3812, 0xff, 0xff, 0xff),
+         .driver_info = (kernel_ulong_t)&zte_ad3812_z_blacklist },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MC2716, 0xff, 0xff, 0xff),
+         .driver_info = (kernel_ulong_t)&zte_mc2716_z_blacklist },
         { USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_H10) },
         { USB_DEVICE(DLINK_VENDOR_ID, DLINK_PRODUCT_DWM_652) },
         { USB_DEVICE(ALINK_VENDOR_ID, DLINK_PRODUCT_DWM_652_U5) }, /* Yes, ALINK_VENDOR_ID */
@@ -1141,6 +1168,7 @@ static const struct usb_device_id option_ids[] = {
         { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU516) },
         { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU528) },
         { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU526) },
+        { USB_DEVICE_AND_INTERFACE_INFO(VIETTEL_VENDOR_ID, VIETTEL_PRODUCT_VT1000, 0xff, 0xff, 0xff) },
         { } /* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, option_ids);
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 56aa1e6cc380..329295615d06 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -91,7 +91,6 @@ static const struct usb_device_id id_table[] = {
         { USB_DEVICE(SONY_VENDOR_ID, SONY_QN3USB_PRODUCT_ID) },
         { USB_DEVICE(SANWA_VENDOR_ID, SANWA_PRODUCT_ID) },
         { USB_DEVICE(ADLINK_VENDOR_ID, ADLINK_ND6530_PRODUCT_ID) },
-        { USB_DEVICE(WINCHIPHEAD_VENDOR_ID, WINCHIPHEAD_USBSER_PRODUCT_ID) },
         { USB_DEVICE(SMART_VENDOR_ID, SMART_PRODUCT_ID) },
         { }                                     /* Terminating entry */
 };
diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h
index 3d10d7f02072..c38b8c00c06f 100644
--- a/drivers/usb/serial/pl2303.h
+++ b/drivers/usb/serial/pl2303.h
@@ -145,10 +145,6 @@
 #define ADLINK_VENDOR_ID                0x0b63
 #define ADLINK_ND6530_PRODUCT_ID        0x6530
 
-/* WinChipHead USB->RS 232 adapter */
-#define WINCHIPHEAD_VENDOR_ID           0x4348
-#define WINCHIPHEAD_USBSER_PRODUCT_ID   0x5523
-
 /* SMART USB Serial Adapter */
 #define SMART_VENDOR_ID 0x0b8c
 #define SMART_PRODUCT_ID        0x2303