1 files changed, 18 insertions, 18 deletions

diff --git a/drivers/usb/otg/twl4030-usb.c b/drivers/usb/otg/twl4030-usb.c
index 3acbdb82bcf9..2be9f2fa41f9 100644
--- a/drivers/usb/otg/twl4030-usb.c
+++ b/drivers/usb/otg/twl4030-usb.c
@@ -276,16 +276,16 @@ static int twl4030_i2c_write_u8_verify(struct twl4030_usb *twl,
 {
         u8 check;
 
-        if ((twl4030_i2c_write_u8(module, data, address) >= 0) &&
-            (twl4030_i2c_read_u8(module, &check, address) >= 0) &&
+        if ((twl_i2c_write_u8(module, data, address) >= 0) &&
+            (twl_i2c_read_u8(module, &check, address) >= 0) &&
                                                 (check == data))
                 return 0;
         dev_dbg(twl->dev, "Write%d[%d,0x%x] wrote %02x but read %02x\n",
                         1, module, address, check, data);
 
         /* Failed once: Try again */
-        if ((twl4030_i2c_write_u8(module, data, address) >= 0) &&
-            (twl4030_i2c_read_u8(module, &check, address) >= 0) &&
+        if ((twl_i2c_write_u8(module, data, address) >= 0) &&
+            (twl_i2c_read_u8(module, &check, address) >= 0) &&
                                                 (check == data))
                 return 0;
         dev_dbg(twl->dev, "Write%d[%d,0x%x] wrote %02x but read %02x\n",
@@ -303,7 +303,7 @@ static inline int twl4030_usb_write(struct twl4030_usb *twl,
 {
         int ret = 0;
 
-        ret = twl4030_i2c_write_u8(TWL4030_MODULE_USB, data, address);
+        ret = twl_i2c_write_u8(TWL4030_MODULE_USB, data, address);
         if (ret < 0)
                 dev_dbg(twl->dev,
                         "TWL4030:USB:Write[0x%x] Error %d\n", address, ret);
@@ -315,7 +315,7 @@ static inline int twl4030_readb(struct twl4030_usb *twl, u8 module, u8 address)
         u8 data;
         int ret = 0;
 
-        ret = twl4030_i2c_read_u8(module, &data, address);
+        ret = twl_i2c_read_u8(module, &data, address);
         if (ret >= 0)
                 ret = data;
         else
@@ -462,7 +462,7 @@ static void twl4030_phy_power(struct twl4030_usb *twl, int on)
                  * SLEEP. We work around this by clearing the bit after usv3v1
                  * is re-activated. This ensures that VUSB3V1 is really active.
                  */
-                twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0,
+                twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0,
                                                         VUSB_DEDICATED2);
                 regulator_enable(twl->usb1v5);
                 pwr &= ~PHY_PWR_PHYPWD;
@@ -505,44 +505,44 @@ static void twl4030_phy_resume(struct twl4030_usb *twl)
 static int twl4030_usb_ldo_init(struct twl4030_usb *twl)
 {
         /* Enable writing to power configuration registers */
-        twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, 0xC0, PROTECT_KEY);
-        twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, 0x0C, PROTECT_KEY);
+        twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, 0xC0, PROTECT_KEY);
+        twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, 0x0C, PROTECT_KEY);
 
         /* put VUSB3V1 LDO in active state */
-        twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB_DEDICATED2);
+        twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB_DEDICATED2);
 
         /* input to VUSB3V1 LDO is from VBAT, not VBUS */
-        twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x14, VUSB_DEDICATED1);
+        twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x14, VUSB_DEDICATED1);
 
         /* Initialize 3.1V regulator */
-        twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB3V1_DEV_GRP);
+        twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB3V1_DEV_GRP);
 
         twl->usb3v1 = regulator_get(twl->dev, "usb3v1");
         if (IS_ERR(twl->usb3v1))
                 return -ENODEV;
 
-        twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB3V1_TYPE);
+        twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB3V1_TYPE);
 
         /* Initialize 1.5V regulator */
-        twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB1V5_DEV_GRP);
+        twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB1V5_DEV_GRP);
 
         twl->usb1v5 = regulator_get(twl->dev, "usb1v5");
         if (IS_ERR(twl->usb1v5))
                 goto fail1;
 
-        twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB1V5_TYPE);
+        twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB1V5_TYPE);
 
         /* Initialize 1.8V regulator */
-        twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB1V8_DEV_GRP);
+        twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB1V8_DEV_GRP);
 
         twl->usb1v8 = regulator_get(twl->dev, "usb1v8");
         if (IS_ERR(twl->usb1v8))
                 goto fail2;
 
-        twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB1V8_TYPE);
+        twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB1V8_TYPE);
 
         /* disable access to power configuration registers */
-        twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, 0, PROTECT_KEY);
+        twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, 0, PROTECT_KEY);
 
         return 0;