1 files changed, 15 insertions, 225 deletions

diff --git a/drivers/usb/net/usbnet.c b/drivers/usb/net/usbnet.c
index 3f2cad6dc261..57b41fbd3bb8 100644
--- a/drivers/usb/net/usbnet.c
+++ b/drivers/usb/net/usbnet.c
@@ -322,48 +322,6 @@ static void skb_return (struct usbnet *dev, struct sk_buff *skb)
 }
 
 
-#ifdef  CONFIG_USB_ALI_M5632
-#define HAVE_HARDWARE
-
-/*-------------------------------------------------------------------------
- *
- * ALi M5632 driver ... does high speed
- *
- *-------------------------------------------------------------------------*/
-
-static const struct driver_info ali_m5632_info = {
-        .description =  "ALi M5632",
-};
-
-
-#endif
-
-
-#ifdef  CONFIG_USB_AN2720
-#define HAVE_HARDWARE
-
-/*-------------------------------------------------------------------------
- *
- * AnchorChips 2720 driver ... http://www.cypress.com
- *
- * This doesn't seem to have a way to detect whether the peer is
- * connected, or need any reset handshaking.  It's got pretty big
- * internal buffers (handles most of a frame's worth of data).
- * Chip data sheets don't describe any vendor control messages.
- *
- *-------------------------------------------------------------------------*/
-
-static const struct driver_info an2720_info = {
-        .description =  "AnchorChips/Cypress 2720",
-        // no reset available!
-        // no check_connect available!
-
-        .in = 2, .out = 2,              // direction distinguishes these
-};
-
-#endif  /* CONFIG_USB_AN2720 */
-
-
 #ifdef CONFIG_USB_AX8817X
 /* ASIX AX8817X based USB 2.0 Ethernet Devices */
 
@@ -1142,25 +1100,6 @@ static const struct driver_info ax88772_info = {
 
 
 
-#ifdef  CONFIG_USB_BELKIN
-#define HAVE_HARDWARE
-
-/*-------------------------------------------------------------------------
- *
- * Belkin F5U104 ... two NetChip 2280 devices + Atmel microcontroller
- *
- * ... also two eTEK designs, including one sold as "Advance USBNET"
- *
- *-------------------------------------------------------------------------*/
-
-static const struct driver_info belkin_info = {
-        .description =  "Belkin, eTEK, or compatible",
-};
-
-#endif  /* CONFIG_USB_BELKIN */
-
-
-
 /*-------------------------------------------------------------------------
  *
  * Communications Device Class declarations.
@@ -1538,32 +1477,6 @@ static const struct driver_info	cdc_info = {
 
 
 
-#ifdef  CONFIG_USB_EPSON2888
-#define HAVE_HARDWARE
-
-/*-------------------------------------------------------------------------
- *
- * EPSON USB clients
- *
- * This is the same idea as Linux PDAs (below) except the firmware in the
- * device might not be Tux-powered.  Epson provides reference firmware that
- * implements this interface.  Product developers can reuse or modify that
- * code, such as by using their own product and vendor codes.
- *
- * Support was from Juro Bystricky <bystricky.juro@erd.epson.com>
- *
- *-------------------------------------------------------------------------*/
-
-static const struct driver_info epson2888_info = {
-        .description =  "Epson USB Device",
-        .check_connect = always_connected,
-
-        .in = 4, .out = 3,
-};
-
-#endif  /* CONFIG_USB_EPSON2888 */
-
-
 #ifdef CONFIG_USB_GENESYS
 #define HAVE_HARDWARE
 
@@ -2495,52 +2408,6 @@ static const struct driver_info	prolific_info = {
 #endif /* CONFIG_USB_PL2301 */
 
 
-#ifdef CONFIG_USB_KC2190
-#define HAVE_HARDWARE
-static const struct driver_info kc2190_info = {
-        .description =  "KC Technology KC-190",
-};
-#endif /* CONFIG_USB_KC2190 */
-
-
-#ifdef  CONFIG_USB_ARMLINUX
-#define HAVE_HARDWARE
-
-/*-------------------------------------------------------------------------
- *
- * Intel's SA-1100 chip integrates basic USB support, and is used
- * in PDAs like some iPaqs, the Yopy, some Zaurus models, and more.
- * When they run Linux, arch/arm/mach-sa1100/usb-eth.c may be used to
- * network using minimal USB framing data.
- *
- * This describes the driver currently in standard ARM Linux kernels.
- * The Zaurus uses a different driver (see later).
- *
- * PXA25x and PXA210 use XScale cores (ARM v5TE) with better USB support
- * and different USB endpoint numbering than the SA1100 devices.  The
- * mach-pxa/usb-eth.c driver re-uses the device ids from mach-sa1100
- * so we rely on the endpoint descriptors.
- *
- *-------------------------------------------------------------------------*/
-
-static const struct driver_info linuxdev_info = {
-        .description =  "Linux Device",
-        .check_connect = always_connected,
-};
-
-static const struct driver_info yopy_info = {
-        .description =  "Yopy",
-        .check_connect = always_connected,
-};
-
-static const struct driver_info blob_info = {
-        .description =  "Boot Loader OBject",
-        .check_connect = always_connected,
-};
-
-#endif  /* CONFIG_USB_ARMLINUX */
-
-
 #ifdef CONFIG_USB_ZAURUS
 #define HAVE_HARDWARE
 
@@ -3575,7 +3442,7 @@ static void usbnet_bh (unsigned long param)
  
 // precondition: never called in_interrupt
 
-static void usbnet_disconnect (struct usb_interface *intf)
+void usbnet_disconnect (struct usb_interface *intf)
 {
         struct usbnet           *dev;
         struct usb_device       *xdev;
@@ -3589,7 +3456,8 @@ static void usbnet_disconnect (struct usb_interface *intf)
         xdev = interface_to_usbdev (intf);
 
         if (netif_msg_probe (dev))
-                devinfo (dev, "unregister usbnet usb-%s-%s, %s",
+                devinfo (dev, "unregister '%s' usb-%s-%s, %s",
+                        intf->dev.driver->name,
                         xdev->bus->bus_name, xdev->devpath,
                         dev->driver_info->description);
         
@@ -3605,6 +3473,7 @@ static void usbnet_disconnect (struct usb_interface *intf)
         free_netdev(net);
         usb_put_dev (xdev);
 }
+EXPORT_SYMBOL_GPL(usbnet_disconnect);
 
 
 /*-------------------------------------------------------------------------*/
@@ -3613,7 +3482,7 @@ static struct ethtool_ops usbnet_ethtool_ops;
 
 // precondition: never called in_interrupt
 
-static int
+int
 usbnet_probe (struct usb_interface *udev, const struct usb_device_id *prod)
 {
         struct usbnet                   *dev;
@@ -3719,8 +3588,9 @@ usbnet_probe (struct usb_interface *udev, const struct usb_device_id *prod)
         if (status)
                 goto out3;
         if (netif_msg_probe (dev))
-                devinfo (dev, "register usbnet at usb-%s-%s, %s, "
+                devinfo (dev, "register '%s' at usb-%s-%s, %s, "
                                 "%02x:%02x:%02x:%02x:%02x:%02x",
+                        udev->dev.driver->name,
                         xdev->bus->bus_name, xdev->devpath,
                         dev->driver_info->description,
                         net->dev_addr [0], net->dev_addr [1],
@@ -3744,12 +3614,15 @@ out:
         usb_put_dev(xdev);
         return status;
 }
+EXPORT_SYMBOL_GPL(usbnet_probe);
 
 /*-------------------------------------------------------------------------*/
 
-#ifdef  CONFIG_PM
+/* FIXME these suspend/resume methods assume non-CDC style
+ * devices, with only one interface.
+ */
 
-static int usbnet_suspend (struct usb_interface *intf, pm_message_t message)
+int usbnet_suspend (struct usb_interface *intf, pm_message_t message)
 {
         struct usbnet           *dev = usb_get_intfdata(intf);
         
@@ -3762,8 +3635,9 @@ static int usbnet_suspend (struct usb_interface *intf, pm_message_t message)
         intf->dev.power.power_state = PMSG_SUSPEND;
         return 0;
 }
+EXPORT_SYMBOL_GPL(usbnet_suspend);
 
-static int usbnet_resume (struct usb_interface *intf)
+int usbnet_resume (struct usb_interface *intf)
 {
         struct usbnet           *dev = usb_get_intfdata(intf);
 
@@ -3772,13 +3646,8 @@ static int usbnet_resume (struct usb_interface *intf)
         tasklet_schedule (&dev->bh);
         return 0;
 }
+EXPORT_SYMBOL_GPL(usbnet_resume);
 
-#else   /* !CONFIG_PM */
-
-#define usbnet_suspend  NULL
-#define usbnet_resume   NULL
-
-#endif  /* CONFIG_PM */
 
 /*-------------------------------------------------------------------------*/
 
@@ -3793,36 +3662,6 @@ static int usbnet_resume (struct usb_interface *intf)
 
 static const struct usb_device_id       products [] = {
 
-#ifdef  CONFIG_USB_ALI_M5632
-{
-        USB_DEVICE (0x0402, 0x5632),    // ALi defaults
-        .driver_info =  (unsigned long) &ali_m5632_info,
-},
-#endif
-
-#ifdef  CONFIG_USB_AN2720
-{
-        USB_DEVICE (0x0547, 0x2720),    // AnchorChips defaults
-        .driver_info =  (unsigned long) &an2720_info,
-}, {
-        USB_DEVICE (0x0547, 0x2727),    // Xircom PGUNET
-        .driver_info =  (unsigned long) &an2720_info,
-},
-#endif
-
-#ifdef  CONFIG_USB_BELKIN
-{
-        USB_DEVICE (0x050d, 0x0004),    // Belkin
-        .driver_info =  (unsigned long) &belkin_info,
-}, {
-        USB_DEVICE (0x056c, 0x8100),    // eTEK
-        .driver_info =  (unsigned long) &belkin_info,
-}, {
-        USB_DEVICE (0x0525, 0x9901),    // Advance USBNET (eTEK)
-        .driver_info =  (unsigned long) &belkin_info,
-},
-#endif
-
 #ifdef CONFIG_USB_AX8817X
 {
         // Linksys USB200M
@@ -3879,13 +3718,6 @@ static const struct usb_device_id	products [] = {
 },
 #endif
 
-#ifdef  CONFIG_USB_EPSON2888
-{
-        USB_DEVICE (0x0525, 0x2888),    // EPSON USB client
-        .driver_info    = (unsigned long) &epson2888_info,
-},
-#endif
-
 #ifdef  CONFIG_USB_GENESYS
 {
         USB_DEVICE (0x05e3, 0x0502),    // GL620USB-A
@@ -3916,13 +3748,6 @@ static const struct usb_device_id	products [] = {
 },
 #endif
 
-#ifdef CONFIG_USB_KC2190
-{
-        USB_DEVICE (0x050f, 0x0190),    // KC-190
-        .driver_info =  (unsigned long) &kc2190_info,
-},
-#endif
-
 #ifdef  CONFIG_USB_RNDIS
 {
         /* RNDIS is MSFT's un-official variant of CDC ACM */
@@ -3931,41 +3756,6 @@ static const struct usb_device_id	products [] = {
 },
 #endif
 
-#ifdef  CONFIG_USB_ARMLINUX
-/*
- * SA-1100 using standard ARM Linux kernels, or compatible.
- * Often used when talking to Linux PDAs (iPaq, Yopy, etc).
- * The sa-1100 "usb-eth" driver handles the basic framing.
- *
- * PXA25x or PXA210 ...  these use a "usb-eth" driver much like
- * the sa1100 one, but hardware uses different endpoint numbers.
- *
- * Or the Linux "Ethernet" gadget on hardware that can't talk
- * CDC Ethernet (e.g., no altsettings), in either of two modes:
- *  - acting just like the old "usb-eth" firmware, though
- *    the implementation is different 
- *  - supporting RNDIS as the first/default configuration for
- *    MS-Windows interop; Linux needs to use the other config
- */
-{
-        // 1183 = 0x049F, both used as hex values?
-        // Compaq "Itsy" vendor/product id
-        USB_DEVICE (0x049F, 0x505A),    // usb-eth, or compatible
-        .driver_info =  (unsigned long) &linuxdev_info,
-}, {
-        USB_DEVICE (0x0E7E, 0x1001),    // G.Mate "Yopy"
-        .driver_info =  (unsigned long) &yopy_info,
-}, {
-        USB_DEVICE (0x8086, 0x07d3),    // "blob" bootloader
-        .driver_info =  (unsigned long) &blob_info,
-}, {
-        // Linux Ethernet/RNDIS gadget on pxa210/25x/26x
-        // e.g. Gumstix, current OpenZaurus, ...
-        USB_DEVICE_VER (0x0525, 0xa4a2, 0x0203, 0x0203),
-        .driver_info =  (unsigned long) &linuxdev_info,
-}, 
-#endif
-
 #if     defined(CONFIG_USB_ZAURUS) || defined(CONFIG_USB_CDCETHER)
 /*
  * SA-1100 based Sharp Zaurus ("collie"), or compatible.