1 files changed, 156 insertions, 0 deletions

diff --git a/drivers/usb/net/plusb.c b/drivers/usb/net/plusb.c
new file mode 100644
index 000000000000..74c2b3581c76
--- /dev/null
+++ b/drivers/usb/net/plusb.c
@@ -0,0 +1,156 @@
+/*
+ * PL-2301/2302 USB host-to-host link cables
+ * Copyright (C) 2000-2005 by David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+// #define      DEBUG                   // error path messages, extra info
+// #define      VERBOSE                 // more; success messages
+
+#include <linux/config.h>
+#ifdef  CONFIG_USB_DEBUG
+#   define DEBUG
+#endif
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/workqueue.h>
+#include <linux/mii.h>
+#include <linux/usb.h>
+
+#include "usbnet.h"
+
+
+/*
+ * Prolific PL-2301/PL-2302 driver ... http://www.prolifictech.com
+ *
+ * The protocol and handshaking used here should be bug-compatible
+ * with the Linux 2.2 "plusb" driver, by Deti Fliegl.
+ *
+ * HEADS UP:  this handshaking isn't all that robust.  This driver
+ * gets confused easily if you unplug one end of the cable then
+ * try to connect it again; you'll need to restart both ends. The
+ * "naplink" software (used by some PlayStation/2 deveopers) does
+ * the handshaking much better!   Also, sometimes this hardware
+ * seems to get wedged under load.  Prolific docs are weak, and
+ * don't identify differences between PL2301 and PL2302, much less
+ * anything to explain the different PL2302 versions observed.
+ */
+
+/*
+ * Bits 0-4 can be used for software handshaking; they're set from
+ * one end, cleared from the other, "read" with the interrupt byte.
+ */
+#define PL_S_EN         (1<<7)          /* (feature only) suspend enable */
+/* reserved bit -- rx ready (6) ? */
+#define PL_TX_READY     (1<<5)          /* (interrupt only) transmit ready */
+#define PL_RESET_OUT    (1<<4)          /* reset output pipe */
+#define PL_RESET_IN     (1<<3)          /* reset input pipe */
+#define PL_TX_C         (1<<2)          /* transmission complete */
+#define PL_TX_REQ       (1<<1)          /* transmission received */
+#define PL_PEER_E       (1<<0)          /* peer exists */
+
+static inline int
+pl_vendor_req(struct usbnet *dev, u8 req, u8 val, u8 index)
+{
+        return usb_control_msg(dev->udev,
+                usb_rcvctrlpipe(dev->udev, 0),
+                req,
+                USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+                val, index,
+                NULL, 0,
+                USB_CTRL_GET_TIMEOUT);
+}
+
+static inline int
+pl_clear_QuickLink_features(struct usbnet *dev, int val)
+{
+        return pl_vendor_req(dev, 1, (u8) val, 0);
+}
+
+static inline int
+pl_set_QuickLink_features(struct usbnet *dev, int val)
+{
+        return pl_vendor_req(dev, 3, (u8) val, 0);
+}
+
+static int pl_reset(struct usbnet *dev)
+{
+        /* some units seem to need this reset, others reject it utterly.
+         * FIXME be more like "naplink" or windows drivers.
+         */
+        (void) pl_set_QuickLink_features(dev,
+                PL_S_EN|PL_RESET_OUT|PL_RESET_IN|PL_PEER_E);
+        return 0;
+}
+
+static const struct driver_info prolific_info = {
+        .description =  "Prolific PL-2301/PL-2302",
+        .flags =        FLAG_NO_SETINT,
+                /* some PL-2302 versions seem to fail usb_set_interface() */
+        .reset =        pl_reset,
+};
+
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * Proilific's name won't normally be on the cables, and
+ * may not be on the device.
+ */
+
+static const struct usb_device_id       products [] = {
+
+{
+        USB_DEVICE(0x067b, 0x0000),     // PL-2301
+        .driver_info =  (unsigned long) &prolific_info,
+}, {
+        USB_DEVICE(0x067b, 0x0001),     // PL-2302
+        .driver_info =  (unsigned long) &prolific_info,
+},
+
+        { },            // END
+};
+MODULE_DEVICE_TABLE(usb, products);
+
+static struct usb_driver plusb_driver = {
+        .owner =        THIS_MODULE,
+        .name =         "plusb",
+        .id_table =     products,
+        .probe =        usbnet_probe,
+        .disconnect =   usbnet_disconnect,
+        .suspend =      usbnet_suspend,
+        .resume =       usbnet_resume,
+};
+
+static int __init plusb_init(void)
+{
+        return usb_register(&plusb_driver);
+}
+module_init(plusb_init);
+
+static void __exit plusb_exit(void)
+{
+        usb_deregister(&plusb_driver);
+}
+module_exit(plusb_exit);
+
+MODULE_AUTHOR("David Brownell");
+MODULE_DESCRIPTION("Prolific PL-2301/2302 USB Host to Host Link Driver");
+MODULE_LICENSE("GPL");