9 files changed, 82 insertions, 22 deletions

diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 5859522d6edd..1ec3857f22e6 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -787,9 +787,10 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd)
 
                         /* start 20 msec resume signaling from this port,
                          * and make khubd collect PORT_STAT_C_SUSPEND to
-                         * stop that signaling.
+                         * stop that signaling.  Use 5 ms extra for safety,
+                         * like usb_port_resume() does.
                          */
-                        ehci->reset_done [i] = jiffies + msecs_to_jiffies (20);
+                        ehci->reset_done[i] = jiffies + msecs_to_jiffies(25);
                         ehci_dbg (ehci, "port %d remote wakeup\n", i + 1);
                         mod_timer(&hcd->rh_timer, ehci->reset_done[i]);
                 }
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index 2c6571c05f35..c75d9270c752 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -120,9 +120,26 @@ static int ehci_bus_suspend (struct usb_hcd *hcd)
         del_timer_sync(&ehci->watchdog);
         del_timer_sync(&ehci->iaa_watchdog);
 
-        port = HCS_N_PORTS (ehci->hcs_params);
         spin_lock_irq (&ehci->lock);
 
+        /* Once the controller is stopped, port resumes that are already
+         * in progress won't complete.  Hence if remote wakeup is enabled
+         * for the root hub and any ports are in the middle of a resume or
+         * remote wakeup, we must fail the suspend.
+         */
+        if (hcd->self.root_hub->do_remote_wakeup) {
+                port = HCS_N_PORTS(ehci->hcs_params);
+                while (port--) {
+                        if (ehci->reset_done[port] != 0) {
+                                spin_unlock_irq(&ehci->lock);
+                                ehci_dbg(ehci, "suspend failed because "
+                                                "port %d is resuming\n",
+                                                port + 1);
+                                return -EBUSY;
+                        }
+                }
+        }
+
         /* stop schedules, clean any completed work */
         if (HC_IS_RUNNING(hcd->state)) {
                 ehci_quiesce (ehci);
@@ -138,6 +155,7 @@ static int ehci_bus_suspend (struct usb_hcd *hcd)
          */
         ehci->bus_suspended = 0;
         ehci->owned_ports = 0;
+        port = HCS_N_PORTS(ehci->hcs_params);
         while (port--) {
                 u32 __iomem     *reg = &ehci->regs->port_status [port];
                 u32             t1 = ehci_readl(ehci, reg) & ~PORT_RWC_BITS;
diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c
index a427d3b00634..89521775c567 100644
--- a/drivers/usb/host/ehci-q.c
+++ b/drivers/usb/host/ehci-q.c
@@ -849,9 +849,10 @@ qh_make (
                                  * But interval 1 scheduling is simpler, and
                                  * includes high bandwidth.
                                  */
-                                dbg ("intr period %d uframes, NYET!",
-                                                urb->interval);
-                                goto done;
+                                urb->interval = 1;
+                        } else if (qh->period > ehci->periodic_size) {
+                                qh->period = ehci->periodic_size;
+                                urb->interval = qh->period << 3;
                         }
                 } else {
                         int             think_time;
@@ -874,6 +875,10 @@ qh_make (
                                         usb_calc_bus_time (urb->dev->speed,
                                         is_input, 0, max_packet (maxp)));
                         qh->period = urb->interval;
+                        if (qh->period > ehci->periodic_size) {
+                                qh->period = ehci->periodic_size;
+                                urb->interval = qh->period;
+                        }
                 }
         }
 
diff --git a/drivers/usb/host/fhci-hcd.c b/drivers/usb/host/fhci-hcd.c
index 0951818ef93b..78e7c3cfcb72 100644
--- a/drivers/usb/host/fhci-hcd.c
+++ b/drivers/usb/host/fhci-hcd.c
@@ -242,9 +242,10 @@ err:
 static void fhci_usb_free(void *lld)
 {
         struct fhci_usb *usb = lld;
-        struct fhci_hcd *fhci = usb->fhci;
+        struct fhci_hcd *fhci;
 
         if (usb) {
+                fhci = usb->fhci;
                 fhci_config_transceiver(fhci, FHCI_PORT_POWER_OFF);
                 fhci_ep0_free(usb);
                 kfree(usb->actual_frame);
diff --git a/drivers/usb/host/isp1362-hcd.c b/drivers/usb/host/isp1362-hcd.c
index 73352f3739b5..42971657fde2 100644
--- a/drivers/usb/host/isp1362-hcd.c
+++ b/drivers/usb/host/isp1362-hcd.c
@@ -2270,10 +2270,10 @@ static int isp1362_mem_config(struct usb_hcd *hcd)
         dev_info(hcd->self.controller, "ISP1362 Memory usage:\n");
         dev_info(hcd->self.controller, "  ISTL:    2 * %4d:     %4d @ $%04x:$%04x\n",
                  istl_size / 2, istl_size, 0, istl_size / 2);
-        dev_info(hcd->self.controller, "  INTL: %4d * (%3lu+8):  %4d @ $%04x\n",
+        dev_info(hcd->self.controller, "  INTL: %4d * (%3zu+8):  %4d @ $%04x\n",
                  ISP1362_INTL_BUFFERS, intl_blksize - PTD_HEADER_SIZE,
                  intl_size, istl_size);
-        dev_info(hcd->self.controller, "  ATL : %4d * (%3lu+8):  %4d @ $%04x\n",
+        dev_info(hcd->self.controller, "  ATL : %4d * (%3zu+8):  %4d @ $%04x\n",
                  atl_buffers, atl_blksize - PTD_HEADER_SIZE,
                  atl_size, istl_size + intl_size);
         dev_info(hcd->self.controller, "  USED/FREE:   %4d      %4d\n", total,
@@ -2697,6 +2697,8 @@ static int __init isp1362_probe(struct platform_device *pdev)
         void __iomem *data_reg;
         int irq;
         int retval = 0;
+        struct resource *irq_res;
+        unsigned int irq_flags = 0;
 
         /* basic sanity checks first.  board-specific init logic should
          * have initialized this the three resources and probably board
@@ -2710,11 +2712,12 @@ static int __init isp1362_probe(struct platform_device *pdev)
 
         data = platform_get_resource(pdev, IORESOURCE_MEM, 0);
         addr = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-        irq = platform_get_irq(pdev, 0);
-        if (!addr || !data || irq < 0) {
+        irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+        if (!addr || !data || !irq_res) {
                 retval = -ENODEV;
                 goto err1;
         }
+        irq = irq_res->start;
 
 #ifdef CONFIG_USB_HCD_DMA
         if (pdev->dev.dma_mask) {
@@ -2781,12 +2784,16 @@ static int __init isp1362_probe(struct platform_device *pdev)
         }
 #endif
 
-#ifdef CONFIG_ARM
-        if (isp1362_hcd->board)
-                set_irq_type(irq, isp1362_hcd->board->int_act_high ? IRQT_RISING : IRQT_FALLING);
-#endif
+        if (irq_res->flags & IORESOURCE_IRQ_HIGHEDGE)
+                irq_flags |= IRQF_TRIGGER_RISING;
+        if (irq_res->flags & IORESOURCE_IRQ_LOWEDGE)
+                irq_flags |= IRQF_TRIGGER_FALLING;
+        if (irq_res->flags & IORESOURCE_IRQ_HIGHLEVEL)
+                irq_flags |= IRQF_TRIGGER_HIGH;
+        if (irq_res->flags & IORESOURCE_IRQ_LOWLEVEL)
+                irq_flags |= IRQF_TRIGGER_LOW;
 
-        retval = usb_add_hcd(hcd, irq, IRQF_TRIGGER_LOW | IRQF_DISABLED | IRQF_SHARED);
+        retval = usb_add_hcd(hcd, irq, irq_flags | IRQF_DISABLED | IRQF_SHARED);
         if (retval != 0)
                 goto err6;
         pr_info("%s, irq %d\n", hcd->product_desc, irq);
diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c
index 9600a58299db..27b8f7cb4471 100644
--- a/drivers/usb/host/isp1760-hcd.c
+++ b/drivers/usb/host/isp1760-hcd.c
@@ -1039,12 +1039,12 @@ static void do_atl_int(struct usb_hcd *usb_hcd)
                 if (!nakcount && (dw3 & DW3_QTD_ACTIVE)) {
                         u32 buffstatus;
 
-                        /* XXX
+                        /*
                          * NAKs are handled in HW by the chip. Usually if the
                          * device is not able to send data fast enough.
-                         * This did not trigger for a long time now.
+                         * This happens mostly on slower hardware.
                          */
-                        printk(KERN_ERR "Reloading ptd %p/%p... qh %p readed: "
+                        printk(KERN_NOTICE "Reloading ptd %p/%p... qh %p read: "
                                         "%d of %zu done: %08x cur: %08x\n", qtd,
                                         urb, qh, PTD_XFERRED_LENGTH(dw3),
                                         qtd->length, done_map,
diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c
index b7a661c02bcd..0ceec123ddfd 100644
--- a/drivers/usb/host/r8a66597-hcd.c
+++ b/drivers/usb/host/r8a66597-hcd.c
@@ -216,8 +216,17 @@ static void disable_controller(struct r8a66597 *r8a66597)
 {
         int port;
 
+        /* disable interrupts */
         r8a66597_write(r8a66597, 0, INTENB0);
-        r8a66597_write(r8a66597, 0, INTSTS0);
+        r8a66597_write(r8a66597, 0, INTENB1);
+        r8a66597_write(r8a66597, 0, BRDYENB);
+        r8a66597_write(r8a66597, 0, BEMPENB);
+        r8a66597_write(r8a66597, 0, NRDYENB);
+
+        /* clear status */
+        r8a66597_write(r8a66597, 0, BRDYSTS);
+        r8a66597_write(r8a66597, 0, NRDYSTS);
+        r8a66597_write(r8a66597, 0, BEMPSTS);
 
         for (port = 0; port < r8a66597->max_root_hub; port++)
                 r8a66597_disable_port(r8a66597, port);
@@ -2466,6 +2475,12 @@ static int __devinit r8a66597_probe(struct platform_device *pdev)
         r8a66597->rh_timer.data = (unsigned long)r8a66597;
         r8a66597->reg = (unsigned long)reg;
 
+        /* make sure no interrupts are pending */
+        ret = r8a66597_clock_enable(r8a66597);
+        if (ret < 0)
+                goto clean_up3;
+        disable_controller(r8a66597);
+
         for (i = 0; i < R8A66597_MAX_NUM_PIPE; i++) {
                 INIT_LIST_HEAD(&r8a66597->pipe_queue[i]);
                 init_timer(&r8a66597->td_timer[i]);
diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c
index 5cd0e48f67fb..99cd00fd3514 100644
--- a/drivers/usb/host/uhci-hcd.c
+++ b/drivers/usb/host/uhci-hcd.c
@@ -749,7 +749,20 @@ static int uhci_rh_suspend(struct usb_hcd *hcd)
         spin_lock_irq(&uhci->lock);
         if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags))
                 rc = -ESHUTDOWN;
-        else if (!uhci->dead)
+        else if (uhci->dead)
+                ;               /* Dead controllers tell no tales */
+
+        /* Once the controller is stopped, port resumes that are already
+         * in progress won't complete.  Hence if remote wakeup is enabled
+         * for the root hub and any ports are in the middle of a resume or
+         * remote wakeup, we must fail the suspend.
+         */
+        else if (hcd->self.root_hub->do_remote_wakeup &&
+                        uhci->resuming_ports) {
+                dev_dbg(uhci_dev(uhci), "suspend failed because a port "
+                                "is resuming\n");
+                rc = -EBUSY;
+        } else
                 suspend_rh(uhci, UHCI_RH_SUSPENDED);
         spin_unlock_irq(&uhci->lock);
         return rc;
diff --git a/drivers/usb/host/uhci-hub.c b/drivers/usb/host/uhci-hub.c
index 885b585360b9..8270055848ca 100644
--- a/drivers/usb/host/uhci-hub.c
+++ b/drivers/usb/host/uhci-hub.c
@@ -167,7 +167,7 @@ static void uhci_check_ports(struct uhci_hcd *uhci)
                                 /* Port received a wakeup request */
                                 set_bit(port, &uhci->resuming_ports);
                                 uhci->ports_timeout = jiffies +
-                                                msecs_to_jiffies(20);
+                                                msecs_to_jiffies(25);
 
                                 /* Make sure we see the port again
                                  * after the resuming period is over. */