1 files changed, 208 insertions, 0 deletions

diff --git a/drivers/usb/host/uhci-grlib.c b/drivers/usb/host/uhci-grlib.c
new file mode 100644
index 000000000000..d01c1e227681
--- /dev/null
+++ b/drivers/usb/host/uhci-grlib.c
@@ -0,0 +1,208 @@
+/*
+ * UHCI HCD (Host Controller Driver) for GRLIB GRUSBHC
+ *
+ * Copyright (c) 2011 Jan Andersson <jan@gaisler.com>
+ *
+ * This file is based on UHCI PCI HCD:
+ * (C) Copyright 1999 Linus Torvalds
+ * (C) Copyright 1999-2002 Johannes Erdfelt, johannes@erdfelt.com
+ * (C) Copyright 1999 Randy Dunlap
+ * (C) Copyright 1999 Georg Acher, acher@in.tum.de
+ * (C) Copyright 1999 Deti Fliegl, deti@fliegl.de
+ * (C) Copyright 1999 Thomas Sailer, sailer@ife.ee.ethz.ch
+ * (C) Copyright 1999 Roman Weissgaerber, weissg@vienna.at
+ * (C) Copyright 2000 Yggdrasil Computing, Inc. (port of new PCI interface
+ *               support from usb-ohci.c by Adam Richter, adam@yggdrasil.com).
+ * (C) Copyright 1999 Gregory P. Smith (from usb-ohci.c)
+ * (C) Copyright 2004-2007 Alan Stern, stern@rowland.harvard.edu
+ */
+
+#include <linux/of_irq.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+
+static int uhci_grlib_init(struct usb_hcd *hcd)
+{
+        struct uhci_hcd *uhci = hcd_to_uhci(hcd);
+
+        /*
+         * Probe to determine the endianness of the controller.
+         * We know that bit 7 of the PORTSC1 register is always set
+         * and bit 15 is always clear.  If uhci_readw() yields a value
+         * with bit 7 (0x80) turned on then the current little-endian
+         * setting is correct.  Otherwise we assume the value was
+         * byte-swapped; hence the register interface and presumably
+         * also the descriptors are big-endian.
+         */
+        if (!(uhci_readw(uhci, USBPORTSC1) & 0x80)) {
+                uhci->big_endian_mmio = 1;
+                uhci->big_endian_desc = 1;
+        }
+
+        uhci->rh_numports = uhci_count_ports(hcd);
+
+        /* Set up pointers to to generic functions */
+        uhci->reset_hc = uhci_generic_reset_hc;
+        uhci->check_and_reset_hc = uhci_generic_check_and_reset_hc;
+        /* No special actions need to be taken for the functions below */
+        uhci->configure_hc = NULL;
+        uhci->resume_detect_interrupts_are_broken = NULL;
+        uhci->global_suspend_mode_is_broken = NULL;
+
+        /* Reset if the controller isn't already safely quiescent. */
+        check_and_reset_hc(uhci);
+        return 0;
+}
+
+static const struct hc_driver uhci_grlib_hc_driver = {
+        .description =          hcd_name,
+        .product_desc =         "GRLIB GRUSBHC UHCI Host Controller",
+        .hcd_priv_size =        sizeof(struct uhci_hcd),
+
+        /* Generic hardware linkage */
+        .irq =                  uhci_irq,
+        .flags =                HCD_MEMORY | HCD_USB11,
+
+        /* Basic lifecycle operations */
+        .reset =                uhci_grlib_init,
+        .start =                uhci_start,
+#ifdef CONFIG_PM
+        .pci_suspend =          NULL,
+        .pci_resume =           NULL,
+        .bus_suspend =          uhci_rh_suspend,
+        .bus_resume =           uhci_rh_resume,
+#endif
+        .stop =                 uhci_stop,
+
+        .urb_enqueue =          uhci_urb_enqueue,
+        .urb_dequeue =          uhci_urb_dequeue,
+
+        .endpoint_disable =     uhci_hcd_endpoint_disable,
+        .get_frame_number =     uhci_hcd_get_frame_number,
+
+        .hub_status_data =      uhci_hub_status_data,
+        .hub_control =          uhci_hub_control,
+};
+
+
+static int __devinit uhci_hcd_grlib_probe(struct platform_device *op)
+{
+        struct device_node *dn = op->dev.of_node;
+        struct usb_hcd *hcd;
+        struct uhci_hcd *uhci = NULL;
+        struct resource res;
+        int irq;
+        int rv;
+
+        if (usb_disabled())
+                return -ENODEV;
+
+        dev_dbg(&op->dev, "initializing GRUSBHC UHCI USB Controller\n");
+
+        rv = of_address_to_resource(dn, 0, &res);
+        if (rv)
+                return rv;
+
+        /* usb_create_hcd requires dma_mask != NULL */
+        op->dev.dma_mask = &op->dev.coherent_dma_mask;
+        hcd = usb_create_hcd(&uhci_grlib_hc_driver, &op->dev,
+                        "GRUSBHC UHCI USB");
+        if (!hcd)
+                return -ENOMEM;
+
+        hcd->rsrc_start = res.start;
+        hcd->rsrc_len = res.end - res.start + 1;
+
+        if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
+                printk(KERN_ERR "%s: request_mem_region failed\n", __FILE__);
+                rv = -EBUSY;
+                goto err_rmr;
+        }
+
+        irq = irq_of_parse_and_map(dn, 0);
+        if (irq == NO_IRQ) {
+                printk(KERN_ERR "%s: irq_of_parse_and_map failed\n", __FILE__);
+                rv = -EBUSY;
+                goto err_irq;
+        }
+
+        hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
+        if (!hcd->regs) {
+                printk(KERN_ERR "%s: ioremap failed\n", __FILE__);
+                rv = -ENOMEM;
+                goto err_ioremap;
+        }
+
+        uhci = hcd_to_uhci(hcd);
+
+        uhci->regs = hcd->regs;
+
+        rv = usb_add_hcd(hcd, irq, 0);
+        if (rv)
+                goto err_uhci;
+
+        return 0;
+
+err_uhci:
+        iounmap(hcd->regs);
+err_ioremap:
+        irq_dispose_mapping(irq);
+err_irq:
+        release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+err_rmr:
+        usb_put_hcd(hcd);
+
+        return rv;
+}
+
+static int uhci_hcd_grlib_remove(struct platform_device *op)
+{
+        struct usb_hcd *hcd = dev_get_drvdata(&op->dev);
+
+        dev_set_drvdata(&op->dev, NULL);
+
+        dev_dbg(&op->dev, "stopping GRLIB GRUSBHC UHCI USB Controller\n");
+
+        usb_remove_hcd(hcd);
+
+        iounmap(hcd->regs);
+        irq_dispose_mapping(hcd->irq);
+        release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+
+        usb_put_hcd(hcd);
+
+        return 0;
+}
+
+/* Make sure the controller is quiescent and that we're not using it
+ * any more.  This is mainly for the benefit of programs which, like kexec,
+ * expect the hardware to be idle: not doing DMA or generating IRQs.
+ *
+ * This routine may be called in a damaged or failing kernel.  Hence we
+ * do not acquire the spinlock before shutting down the controller.
+ */
+static void uhci_hcd_grlib_shutdown(struct platform_device *op)
+{
+        struct usb_hcd *hcd = dev_get_drvdata(&op->dev);
+
+        uhci_hc_died(hcd_to_uhci(hcd));
+}
+
+static const struct of_device_id uhci_hcd_grlib_of_match[] = {
+        { .name = "GAISLER_UHCI", },
+        { .name = "01_027", },
+        {},
+};
+MODULE_DEVICE_TABLE(of, uhci_hcd_grlib_of_match);
+
+
+static struct platform_driver uhci_grlib_driver = {
+        .probe          = uhci_hcd_grlib_probe,
+        .remove         = uhci_hcd_grlib_remove,
+        .shutdown       = uhci_hcd_grlib_shutdown,
+        .driver = {
+                .name = "grlib-uhci",
+                .owner = THIS_MODULE,
+                .of_match_table = uhci_hcd_grlib_of_match,
+        },
+};