2 files changed, 19 insertions, 23 deletions

diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 8abd4e59bf4a..8ab389dca2b9 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -1876,7 +1876,8 @@ int usb_add_hcd(struct usb_hcd *hcd,
                  * with IRQF_SHARED. As usb_hcd_irq() will always disable
                  * interrupts we can remove it here.
                  */
-                irqflags &= ~IRQF_DISABLED;
+                if (irqflags & IRQF_SHARED)
+                        irqflags &= ~IRQF_DISABLED;
 
                 snprintf(hcd->irq_descr, sizeof(hcd->irq_descr), "%s:usb%d",
                                 hcd->driver->description, hcd->self.busnum);
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 6a5cb018383d..d99963873e37 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -2683,35 +2683,17 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1,
                                 USB_PORT_STAT_C_ENABLE);
 #endif
 
-        /* Try to use the debounce delay for protection against
-         * port-enable changes caused, for example, by EMI.
-         */
-        if (portchange & (USB_PORT_STAT_C_CONNECTION |
-                                USB_PORT_STAT_C_ENABLE)) {
-                status = hub_port_debounce(hub, port1);
-                if (status < 0) {
-                        if (printk_ratelimit())
-                                dev_err (hub_dev, "connect-debounce failed, "
-                                                "port %d disabled\n", port1);
-                        portstatus &= ~USB_PORT_STAT_CONNECTION;
-                } else {
-                        portstatus = status;
-                }
-        }
-
         /* Try to resuscitate an existing device */
         udev = hdev->children[port1-1];
         if ((portstatus & USB_PORT_STAT_CONNECTION) && udev &&
                         udev->state != USB_STATE_NOTATTACHED) {
-
                 usb_lock_device(udev);
                 if (portstatus & USB_PORT_STAT_ENABLE) {
                         status = 0;             /* Nothing to do */
-                } else if (!udev->persist_enabled) {
-                        status = -ENODEV;       /* Mustn't resuscitate */
 
 #ifdef CONFIG_USB_SUSPEND
-                } else if (udev->state == USB_STATE_SUSPENDED) {
+                } else if (udev->state == USB_STATE_SUSPENDED &&
+                                udev->persist_enabled) {
                         /* For a suspended device, treat this as a
                          * remote wakeup event.
                          */
@@ -2726,7 +2708,7 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1,
 #endif
 
                 } else {
-                        status = usb_reset_device(udev);
+                        status = -ENODEV;       /* Don't resuscitate */
                 }
                 usb_unlock_device(udev);
 
@@ -2741,6 +2723,19 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1,
                 usb_disconnect(&hdev->children[port1-1]);
         clear_bit(port1, hub->change_bits);
 
+        if (portchange & (USB_PORT_STAT_C_CONNECTION |
+                                USB_PORT_STAT_C_ENABLE)) {
+                status = hub_port_debounce(hub, port1);
+                if (status < 0) {
+                        if (printk_ratelimit())
+                                dev_err(hub_dev, "connect-debounce failed, "
+                                                "port %d disabled\n", port1);
+                        portstatus &= ~USB_PORT_STAT_CONNECTION;
+                } else {
+                        portstatus = status;
+                }
+        }
+
         /* Return now if debouncing failed or nothing is connected */
         if (!(portstatus & USB_PORT_STAT_CONNECTION)) {
 
@@ -2748,7 +2743,7 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1,
                 if ((wHubCharacteristics & HUB_CHAR_LPSM) < 2
                                 && !(portstatus & (1 << USB_PORT_FEAT_POWER)))
                         set_port_feature(hdev, port1, USB_PORT_FEAT_POWER);
- 
+
                 if (portstatus & USB_PORT_STAT_ENABLE)
                         goto done;
                 return;