1 files changed, 709 insertions, 0 deletions

diff --git a/drivers/tty/serial/uartlite.c b/drivers/tty/serial/uartlite.c
new file mode 100644
index 000000000000..d2fce865b731
--- /dev/null
+++ b/drivers/tty/serial/uartlite.c
@@ -0,0 +1,709 @@
+/*
+ * uartlite.c: Serial driver for Xilinx uartlite serial controller
+ *
+ * Copyright (C) 2006 Peter Korsgaard <jacmet@sunsite.dk>
+ * Copyright (C) 2007 Secret Lab Technologies Ltd.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/console.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+#include <linux/tty.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <asm/io.h>
+#if defined(CONFIG_OF) && (defined(CONFIG_PPC32) || defined(CONFIG_MICROBLAZE))
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/of_platform.h>
+
+/* Match table for of_platform binding */
+static struct of_device_id ulite_of_match[] __devinitdata = {
+        { .compatible = "xlnx,opb-uartlite-1.00.b", },
+        { .compatible = "xlnx,xps-uartlite-1.00.a", },
+        {}
+};
+MODULE_DEVICE_TABLE(of, ulite_of_match);
+
+#endif
+
+#define ULITE_NAME              "ttyUL"
+#define ULITE_MAJOR             204
+#define ULITE_MINOR             187
+#define ULITE_NR_UARTS          4
+
+/* ---------------------------------------------------------------------
+ * Register definitions
+ *
+ * For register details see datasheet:
+ * http://www.xilinx.com/support/documentation/ip_documentation/opb_uartlite.pdf 
+ */
+
+#define ULITE_RX                0x00
+#define ULITE_TX                0x04
+#define ULITE_STATUS            0x08
+#define ULITE_CONTROL           0x0c
+
+#define ULITE_REGION            16
+
+#define ULITE_STATUS_RXVALID    0x01
+#define ULITE_STATUS_RXFULL     0x02
+#define ULITE_STATUS_TXEMPTY    0x04
+#define ULITE_STATUS_TXFULL     0x08
+#define ULITE_STATUS_IE         0x10
+#define ULITE_STATUS_OVERRUN    0x20
+#define ULITE_STATUS_FRAME      0x40
+#define ULITE_STATUS_PARITY     0x80
+
+#define ULITE_CONTROL_RST_TX    0x01
+#define ULITE_CONTROL_RST_RX    0x02
+#define ULITE_CONTROL_IE        0x10
+
+
+static struct uart_port ulite_ports[ULITE_NR_UARTS];
+
+/* ---------------------------------------------------------------------
+ * Core UART driver operations
+ */
+
+static int ulite_receive(struct uart_port *port, int stat)
+{
+        struct tty_struct *tty = port->state->port.tty;
+        unsigned char ch = 0;
+        char flag = TTY_NORMAL;
+
+        if ((stat & (ULITE_STATUS_RXVALID | ULITE_STATUS_OVERRUN
+                     | ULITE_STATUS_FRAME)) == 0)
+                return 0;
+
+        /* stats */
+        if (stat & ULITE_STATUS_RXVALID) {
+                port->icount.rx++;
+                ch = ioread32be(port->membase + ULITE_RX);
+
+                if (stat & ULITE_STATUS_PARITY)
+                        port->icount.parity++;
+        }
+
+        if (stat & ULITE_STATUS_OVERRUN)
+                port->icount.overrun++;
+
+        if (stat & ULITE_STATUS_FRAME)
+                port->icount.frame++;
+
+
+        /* drop byte with parity error if IGNPAR specificed */
+        if (stat & port->ignore_status_mask & ULITE_STATUS_PARITY)
+                stat &= ~ULITE_STATUS_RXVALID;
+
+        stat &= port->read_status_mask;
+
+        if (stat & ULITE_STATUS_PARITY)
+                flag = TTY_PARITY;
+
+
+        stat &= ~port->ignore_status_mask;
+
+        if (stat & ULITE_STATUS_RXVALID)
+                tty_insert_flip_char(tty, ch, flag);
+
+        if (stat & ULITE_STATUS_FRAME)
+                tty_insert_flip_char(tty, 0, TTY_FRAME);
+
+        if (stat & ULITE_STATUS_OVERRUN)
+                tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+
+        return 1;
+}
+
+static int ulite_transmit(struct uart_port *port, int stat)
+{
+        struct circ_buf *xmit  = &port->state->xmit;
+
+        if (stat & ULITE_STATUS_TXFULL)
+                return 0;
+
+        if (port->x_char) {
+                iowrite32be(port->x_char, port->membase + ULITE_TX);
+                port->x_char = 0;
+                port->icount.tx++;
+                return 1;
+        }
+
+        if (uart_circ_empty(xmit) || uart_tx_stopped(port))
+                return 0;
+
+        iowrite32be(xmit->buf[xmit->tail], port->membase + ULITE_TX);
+        xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE-1);
+        port->icount.tx++;
+
+        /* wake up */
+        if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+                uart_write_wakeup(port);
+
+        return 1;
+}
+
+static irqreturn_t ulite_isr(int irq, void *dev_id)
+{
+        struct uart_port *port = dev_id;
+        int busy, n = 0;
+
+        do {
+                int stat = ioread32be(port->membase + ULITE_STATUS);
+                busy  = ulite_receive(port, stat);
+                busy |= ulite_transmit(port, stat);
+                n++;
+        } while (busy);
+
+        /* work done? */
+        if (n > 1) {
+                tty_flip_buffer_push(port->state->port.tty);
+                return IRQ_HANDLED;
+        } else {
+                return IRQ_NONE;
+        }
+}
+
+static unsigned int ulite_tx_empty(struct uart_port *port)
+{
+        unsigned long flags;
+        unsigned int ret;
+
+        spin_lock_irqsave(&port->lock, flags);
+        ret = ioread32be(port->membase + ULITE_STATUS);
+        spin_unlock_irqrestore(&port->lock, flags);
+
+        return ret & ULITE_STATUS_TXEMPTY ? TIOCSER_TEMT : 0;
+}
+
+static unsigned int ulite_get_mctrl(struct uart_port *port)
+{
+        return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
+}
+
+static void ulite_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+        /* N/A */
+}
+
+static void ulite_stop_tx(struct uart_port *port)
+{
+        /* N/A */
+}
+
+static void ulite_start_tx(struct uart_port *port)
+{
+        ulite_transmit(port, ioread32be(port->membase + ULITE_STATUS));
+}
+
+static void ulite_stop_rx(struct uart_port *port)
+{
+        /* don't forward any more data (like !CREAD) */
+        port->ignore_status_mask = ULITE_STATUS_RXVALID | ULITE_STATUS_PARITY
+                | ULITE_STATUS_FRAME | ULITE_STATUS_OVERRUN;
+}
+
+static void ulite_enable_ms(struct uart_port *port)
+{
+        /* N/A */
+}
+
+static void ulite_break_ctl(struct uart_port *port, int ctl)
+{
+        /* N/A */
+}
+
+static int ulite_startup(struct uart_port *port)
+{
+        int ret;
+
+        ret = request_irq(port->irq, ulite_isr,
+                          IRQF_SHARED | IRQF_SAMPLE_RANDOM, "uartlite", port);
+        if (ret)
+                return ret;
+
+        iowrite32be(ULITE_CONTROL_RST_RX | ULITE_CONTROL_RST_TX,
+               port->membase + ULITE_CONTROL);
+        iowrite32be(ULITE_CONTROL_IE, port->membase + ULITE_CONTROL);
+
+        return 0;
+}
+
+static void ulite_shutdown(struct uart_port *port)
+{
+        iowrite32be(0, port->membase + ULITE_CONTROL);
+        ioread32be(port->membase + ULITE_CONTROL); /* dummy */
+        free_irq(port->irq, port);
+}
+
+static void ulite_set_termios(struct uart_port *port, struct ktermios *termios,
+                              struct ktermios *old)
+{
+        unsigned long flags;
+        unsigned int baud;
+
+        spin_lock_irqsave(&port->lock, flags);
+
+        port->read_status_mask = ULITE_STATUS_RXVALID | ULITE_STATUS_OVERRUN
+                | ULITE_STATUS_TXFULL;
+
+        if (termios->c_iflag & INPCK)
+                port->read_status_mask |=
+                        ULITE_STATUS_PARITY | ULITE_STATUS_FRAME;
+
+        port->ignore_status_mask = 0;
+        if (termios->c_iflag & IGNPAR)
+                port->ignore_status_mask |= ULITE_STATUS_PARITY
+                        | ULITE_STATUS_FRAME | ULITE_STATUS_OVERRUN;
+
+        /* ignore all characters if CREAD is not set */
+        if ((termios->c_cflag & CREAD) == 0)
+                port->ignore_status_mask |=
+                        ULITE_STATUS_RXVALID | ULITE_STATUS_PARITY
+                        | ULITE_STATUS_FRAME | ULITE_STATUS_OVERRUN;
+
+        /* update timeout */
+        baud = uart_get_baud_rate(port, termios, old, 0, 460800);
+        uart_update_timeout(port, termios->c_cflag, baud);
+
+        spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static const char *ulite_type(struct uart_port *port)
+{
+        return port->type == PORT_UARTLITE ? "uartlite" : NULL;
+}
+
+static void ulite_release_port(struct uart_port *port)
+{
+        release_mem_region(port->mapbase, ULITE_REGION);
+        iounmap(port->membase);
+        port->membase = NULL;
+}
+
+static int ulite_request_port(struct uart_port *port)
+{
+        pr_debug("ulite console: port=%p; port->mapbase=%llx\n",
+                 port, (unsigned long long) port->mapbase);
+
+        if (!request_mem_region(port->mapbase, ULITE_REGION, "uartlite")) {
+                dev_err(port->dev, "Memory region busy\n");
+                return -EBUSY;
+        }
+
+        port->membase = ioremap(port->mapbase, ULITE_REGION);
+        if (!port->membase) {
+                dev_err(port->dev, "Unable to map registers\n");
+                release_mem_region(port->mapbase, ULITE_REGION);
+                return -EBUSY;
+        }
+
+        return 0;
+}
+
+static void ulite_config_port(struct uart_port *port, int flags)
+{
+        if (!ulite_request_port(port))
+                port->type = PORT_UARTLITE;
+}
+
+static int ulite_verify_port(struct uart_port *port, struct serial_struct *ser)
+{
+        /* we don't want the core code to modify any port params */
+        return -EINVAL;
+}
+
+#ifdef CONFIG_CONSOLE_POLL
+static int ulite_get_poll_char(struct uart_port *port)
+{
+        if (!(ioread32be(port->membase + ULITE_STATUS)
+                                                & ULITE_STATUS_RXVALID))
+                return NO_POLL_CHAR;
+
+        return ioread32be(port->membase + ULITE_RX);
+}
+
+static void ulite_put_poll_char(struct uart_port *port, unsigned char ch)
+{
+        while (ioread32be(port->membase + ULITE_STATUS) & ULITE_STATUS_TXFULL)
+                cpu_relax();
+
+        /* write char to device */
+        iowrite32be(ch, port->membase + ULITE_TX);
+}
+#endif
+
+static struct uart_ops ulite_ops = {
+        .tx_empty       = ulite_tx_empty,
+        .set_mctrl      = ulite_set_mctrl,
+        .get_mctrl      = ulite_get_mctrl,
+        .stop_tx        = ulite_stop_tx,
+        .start_tx       = ulite_start_tx,
+        .stop_rx        = ulite_stop_rx,
+        .enable_ms      = ulite_enable_ms,
+        .break_ctl      = ulite_break_ctl,
+        .startup        = ulite_startup,
+        .shutdown       = ulite_shutdown,
+        .set_termios    = ulite_set_termios,
+        .type           = ulite_type,
+        .release_port   = ulite_release_port,
+        .request_port   = ulite_request_port,
+        .config_port    = ulite_config_port,
+        .verify_port    = ulite_verify_port,
+#ifdef CONFIG_CONSOLE_POLL
+        .poll_get_char  = ulite_get_poll_char,
+        .poll_put_char  = ulite_put_poll_char,
+#endif
+};
+
+/* ---------------------------------------------------------------------
+ * Console driver operations
+ */
+
+#ifdef CONFIG_SERIAL_UARTLITE_CONSOLE
+static void ulite_console_wait_tx(struct uart_port *port)
+{
+        int i;
+        u8 val;
+
+        /* Spin waiting for TX fifo to have space available */
+        for (i = 0; i < 100000; i++) {
+                val = ioread32be(port->membase + ULITE_STATUS);
+                if ((val & ULITE_STATUS_TXFULL) == 0)
+                        break;
+                cpu_relax();
+        }
+}
+
+static void ulite_console_putchar(struct uart_port *port, int ch)
+{
+        ulite_console_wait_tx(port);
+        iowrite32be(ch, port->membase + ULITE_TX);
+}
+
+static void ulite_console_write(struct console *co, const char *s,
+                                unsigned int count)
+{
+        struct uart_port *port = &ulite_ports[co->index];
+        unsigned long flags;
+        unsigned int ier;
+        int locked = 1;
+
+        if (oops_in_progress) {
+                locked = spin_trylock_irqsave(&port->lock, flags);
+        } else
+                spin_lock_irqsave(&port->lock, flags);
+
+        /* save and disable interrupt */
+        ier = ioread32be(port->membase + ULITE_STATUS) & ULITE_STATUS_IE;
+        iowrite32be(0, port->membase + ULITE_CONTROL);
+
+        uart_console_write(port, s, count, ulite_console_putchar);
+
+        ulite_console_wait_tx(port);
+
+        /* restore interrupt state */
+        if (ier)
+                iowrite32be(ULITE_CONTROL_IE, port->membase + ULITE_CONTROL);
+
+        if (locked)
+                spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static int __devinit ulite_console_setup(struct console *co, char *options)
+{
+        struct uart_port *port;
+        int baud = 9600;
+        int bits = 8;
+        int parity = 'n';
+        int flow = 'n';
+
+        if (co->index < 0 || co->index >= ULITE_NR_UARTS)
+                return -EINVAL;
+
+        port = &ulite_ports[co->index];
+
+        /* Has the device been initialized yet? */
+        if (!port->mapbase) {
+                pr_debug("console on ttyUL%i not present\n", co->index);
+                return -ENODEV;
+        }
+
+        /* not initialized yet? */
+        if (!port->membase) {
+                if (ulite_request_port(port))
+                        return -ENODEV;
+        }
+
+        if (options)
+                uart_parse_options(options, &baud, &parity, &bits, &flow);
+
+        return uart_set_options(port, co, baud, parity, bits, flow);
+}
+
+static struct uart_driver ulite_uart_driver;
+
+static struct console ulite_console = {
+        .name   = ULITE_NAME,
+        .write  = ulite_console_write,
+        .device = uart_console_device,
+        .setup  = ulite_console_setup,
+        .flags  = CON_PRINTBUFFER,
+        .index  = -1, /* Specified on the cmdline (e.g. console=ttyUL0 ) */
+        .data   = &ulite_uart_driver,
+};
+
+static int __init ulite_console_init(void)
+{
+        register_console(&ulite_console);
+        return 0;
+}
+
+console_initcall(ulite_console_init);
+
+#endif /* CONFIG_SERIAL_UARTLITE_CONSOLE */
+
+static struct uart_driver ulite_uart_driver = {
+        .owner          = THIS_MODULE,
+        .driver_name    = "uartlite",
+        .dev_name       = ULITE_NAME,
+        .major          = ULITE_MAJOR,
+        .minor          = ULITE_MINOR,
+        .nr             = ULITE_NR_UARTS,
+#ifdef CONFIG_SERIAL_UARTLITE_CONSOLE
+        .cons           = &ulite_console,
+#endif
+};
+
+/* ---------------------------------------------------------------------
+ * Port assignment functions (mapping devices to uart_port structures)
+ */
+
+/** ulite_assign: register a uartlite device with the driver
+ *
+ * @dev: pointer to device structure
+ * @id: requested id number.  Pass -1 for automatic port assignment
+ * @base: base address of uartlite registers
+ * @irq: irq number for uartlite
+ *
+ * Returns: 0 on success, <0 otherwise
+ */
+static int __devinit ulite_assign(struct device *dev, int id, u32 base, int irq)
+{
+        struct uart_port *port;
+        int rc;
+
+        /* if id = -1; then scan for a free id and use that */
+        if (id < 0) {
+                for (id = 0; id < ULITE_NR_UARTS; id++)
+                        if (ulite_ports[id].mapbase == 0)
+                                break;
+        }
+        if (id < 0 || id >= ULITE_NR_UARTS) {
+                dev_err(dev, "%s%i too large\n", ULITE_NAME, id);
+                return -EINVAL;
+        }
+
+        if ((ulite_ports[id].mapbase) && (ulite_ports[id].mapbase != base)) {
+                dev_err(dev, "cannot assign to %s%i; it is already in use\n",
+                        ULITE_NAME, id);
+                return -EBUSY;
+        }
+
+        port = &ulite_ports[id];
+
+        spin_lock_init(&port->lock);
+        port->fifosize = 16;
+        port->regshift = 2;
+        port->iotype = UPIO_MEM;
+        port->iobase = 1; /* mark port in use */
+        port->mapbase = base;
+        port->membase = NULL;
+        port->ops = &ulite_ops;
+        port->irq = irq;
+        port->flags = UPF_BOOT_AUTOCONF;
+        port->dev = dev;
+        port->type = PORT_UNKNOWN;
+        port->line = id;
+
+        dev_set_drvdata(dev, port);
+
+        /* Register the port */
+        rc = uart_add_one_port(&ulite_uart_driver, port);
+        if (rc) {
+                dev_err(dev, "uart_add_one_port() failed; err=%i\n", rc);
+                port->mapbase = 0;
+                dev_set_drvdata(dev, NULL);
+                return rc;
+        }
+
+        return 0;
+}
+
+/** ulite_release: register a uartlite device with the driver
+ *
+ * @dev: pointer to device structure
+ */
+static int __devexit ulite_release(struct device *dev)
+{
+        struct uart_port *port = dev_get_drvdata(dev);
+        int rc = 0;
+
+        if (port) {
+                rc = uart_remove_one_port(&ulite_uart_driver, port);
+                dev_set_drvdata(dev, NULL);
+                port->mapbase = 0;
+        }
+
+        return rc;
+}
+
+/* ---------------------------------------------------------------------
+ * Platform bus binding
+ */
+
+static int __devinit ulite_probe(struct platform_device *pdev)
+{
+        struct resource *res, *res2;
+
+        res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+        if (!res)
+                return -ENODEV;
+
+        res2 = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+        if (!res2)
+                return -ENODEV;
+
+        return ulite_assign(&pdev->dev, pdev->id, res->start, res2->start);
+}
+
+static int __devexit ulite_remove(struct platform_device *pdev)
+{
+        return ulite_release(&pdev->dev);
+}
+
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:uartlite");
+
+static struct platform_driver ulite_platform_driver = {
+        .probe  = ulite_probe,
+        .remove = __devexit_p(ulite_remove),
+        .driver = {
+                   .owner = THIS_MODULE,
+                   .name  = "uartlite",
+                   },
+};
+
+/* ---------------------------------------------------------------------
+ * OF bus bindings
+ */
+#if defined(CONFIG_OF) && (defined(CONFIG_PPC32) || defined(CONFIG_MICROBLAZE))
+static int __devinit
+ulite_of_probe(struct platform_device *op, const struct of_device_id *match)
+{
+        struct resource res;
+        const unsigned int *id;
+        int irq, rc;
+
+        dev_dbg(&op->dev, "%s(%p, %p)\n", __func__, op, match);
+
+        rc = of_address_to_resource(op->dev.of_node, 0, &res);
+        if (rc) {
+                dev_err(&op->dev, "invalid address\n");
+                return rc;
+        }
+
+        irq = irq_of_parse_and_map(op->dev.of_node, 0);
+
+        id = of_get_property(op->dev.of_node, "port-number", NULL);
+
+        return ulite_assign(&op->dev, id ? *id : -1, res.start, irq);
+}
+
+static int __devexit ulite_of_remove(struct platform_device *op)
+{
+        return ulite_release(&op->dev);
+}
+
+static struct of_platform_driver ulite_of_driver = {
+        .probe = ulite_of_probe,
+        .remove = __devexit_p(ulite_of_remove),
+        .driver = {
+                .name = "uartlite",
+                .owner = THIS_MODULE,
+                .of_match_table = ulite_of_match,
+        },
+};
+
+/* Registration helpers to keep the number of #ifdefs to a minimum */
+static inline int __init ulite_of_register(void)
+{
+        pr_debug("uartlite: calling of_register_platform_driver()\n");
+        return of_register_platform_driver(&ulite_of_driver);
+}
+
+static inline void __exit ulite_of_unregister(void)
+{
+        of_unregister_platform_driver(&ulite_of_driver);
+}
+#else /* CONFIG_OF && (CONFIG_PPC32 || CONFIG_MICROBLAZE) */
+/* Appropriate config not enabled; do nothing helpers */
+static inline int __init ulite_of_register(void) { return 0; }
+static inline void __exit ulite_of_unregister(void) { }
+#endif /* CONFIG_OF && (CONFIG_PPC32 || CONFIG_MICROBLAZE) */
+
+/* ---------------------------------------------------------------------
+ * Module setup/teardown
+ */
+
+int __init ulite_init(void)
+{
+        int ret;
+
+        pr_debug("uartlite: calling uart_register_driver()\n");
+        ret = uart_register_driver(&ulite_uart_driver);
+        if (ret)
+                goto err_uart;
+
+        ret = ulite_of_register();
+        if (ret)
+                goto err_of;
+
+        pr_debug("uartlite: calling platform_driver_register()\n");
+        ret = platform_driver_register(&ulite_platform_driver);
+        if (ret)
+                goto err_plat;
+
+        return 0;
+
+err_plat:
+        ulite_of_unregister();
+err_of:
+        uart_unregister_driver(&ulite_uart_driver);
+err_uart:
+        printk(KERN_ERR "registering uartlite driver failed: err=%i", ret);
+        return ret;
+}
+
+void __exit ulite_exit(void)
+{
+        platform_driver_unregister(&ulite_platform_driver);
+        ulite_of_unregister();
+        uart_unregister_driver(&ulite_uart_driver);
+}
+
+module_init(ulite_init);
+module_exit(ulite_exit);
+
+MODULE_AUTHOR("Peter Korsgaard <jacmet@sunsite.dk>");
+MODULE_DESCRIPTION("Xilinx uartlite serial driver");
+MODULE_LICENSE("GPL");