1 files changed, 0 insertions, 117 deletions

diff --git a/drivers/tty/serial/s3c24a0.c b/drivers/tty/serial/s3c24a0.c
deleted file mode 100644
index 914eff22e499..000000000000
--- a/drivers/tty/serial/s3c24a0.c
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- * Driver for Samsung S3C24A0 SoC onboard UARTs.
- *
- * Based on drivers/serial/s3c2410.c
- *
- * Author: Sandeep Patil <sandeep.patil@azingo.com>
- *
- * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics
- *      http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/module.h>
-#include <linux/ioport.h>
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/serial.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-
-#include <mach/hardware.h>
-
-#include <plat/regs-serial.h>
-#include <mach/regs-gpio.h>
-
-#include "samsung.h"
-
-static int s3c24a0_serial_setsource(struct uart_port *port,
-                                    struct s3c24xx_uart_clksrc *clk)
-{
-        unsigned long ucon = rd_regl(port, S3C2410_UCON);
-
-        if (strcmp(clk->name, "uclk") == 0)
-                ucon |= S3C2410_UCON_UCLK;
-        else
-                ucon &= ~S3C2410_UCON_UCLK;
-
-        wr_regl(port, S3C2410_UCON, ucon);
-        return 0;
-}
-
-static int s3c24a0_serial_getsource(struct uart_port *port,
-                                    struct s3c24xx_uart_clksrc *clk)
-{
-        unsigned long ucon = rd_regl(port, S3C2410_UCON);
-
-        clk->divisor = 1;
-        clk->name = (ucon & S3C2410_UCON_UCLK) ? "uclk" : "pclk";
-
-        return 0;
-}
-
-static int s3c24a0_serial_resetport(struct uart_port *port,
-                                    struct s3c2410_uartcfg *cfg)
-{
-        dbg("s3c24a0_serial_resetport: port=%p (%08lx), cfg=%p\n",
-            port, port->mapbase, cfg);
-
-        wr_regl(port, S3C2410_UCON,  cfg->ucon);
-        wr_regl(port, S3C2410_ULCON, cfg->ulcon);
-
-        /* reset both fifos */
-
-        wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH);
-        wr_regl(port, S3C2410_UFCON, cfg->ufcon);
-
-        return 0;
-}
-
-static struct s3c24xx_uart_info s3c24a0_uart_inf = {
-        .name           = "Samsung S3C24A0 UART",
-        .type           = PORT_S3C2410,
-        .fifosize       = 16,
-        .rx_fifomask    = S3C24A0_UFSTAT_RXMASK,
-        .rx_fifoshift   = S3C24A0_UFSTAT_RXSHIFT,
-        .rx_fifofull    = S3C24A0_UFSTAT_RXFULL,
-        .tx_fifofull    = S3C24A0_UFSTAT_TXFULL,
-        .tx_fifomask    = S3C24A0_UFSTAT_TXMASK,
-        .tx_fifoshift   = S3C24A0_UFSTAT_TXSHIFT,
-        .get_clksrc     = s3c24a0_serial_getsource,
-        .set_clksrc     = s3c24a0_serial_setsource,
-        .reset_port     = s3c24a0_serial_resetport,
-};
-
-static int s3c24a0_serial_probe(struct platform_device *dev)
-{
-        return s3c24xx_serial_probe(dev, &s3c24a0_uart_inf);
-}
-
-static struct platform_driver s3c24a0_serial_driver = {
-        .probe          = s3c24a0_serial_probe,
-        .remove         = __devexit_p(s3c24xx_serial_remove),
-        .driver         = {
-                .name   = "s3c24a0-uart",
-                .owner  = THIS_MODULE,
-        },
-};
-
-s3c24xx_console_init(&s3c24a0_serial_driver, &s3c24a0_uart_inf);
-
-static int __init s3c24a0_serial_init(void)
-{
-        return s3c24xx_serial_init(&s3c24a0_serial_driver, &s3c24a0_uart_inf);
-}
-
-static void __exit s3c24a0_serial_exit(void)
-{
-        platform_driver_unregister(&s3c24a0_serial_driver);
-}
-
-module_init(s3c24a0_serial_init);
-module_exit(s3c24a0_serial_exit);
-