1 files changed, 59 insertions, 0 deletions

diff --git a/drivers/tty/serial/8250_pci.c b/drivers/tty/serial/8250_pci.c
index 78e98a5cef96..f41b4259ecdd 100644
--- a/drivers/tty/serial/8250_pci.c
+++ b/drivers/tty/serial/8250_pci.c
@@ -994,6 +994,15 @@ static int skip_tx_en_setup(struct serial_private *priv,
         return pci_default_setup(priv, board, port, idx);
 }
 
+static int pci_eg20t_init(struct pci_dev *dev)
+{
+#if defined(CONFIG_SERIAL_PCH_UART) || defined(CONFIG_SERIAL_PCH_UART_MODULE)
+        return -ENODEV;
+#else
+        return 0;
+#endif
+}
+
 /* This should be in linux/pci_ids.h */
 #define PCI_VENDOR_ID_SBSMODULARIO      0x124B
 #define PCI_SUBVENDOR_ID_SBSMODULARIO   0x124B
@@ -1446,6 +1455,56 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
                 .init                   = pci_oxsemi_tornado_init,
                 .setup          = pci_default_setup,
         },
+        {
+                .vendor         = PCI_VENDOR_ID_INTEL,
+                .device         = 0x8811,
+                .init           = pci_eg20t_init,
+        },
+        {
+                .vendor         = PCI_VENDOR_ID_INTEL,
+                .device         = 0x8812,
+                .init           = pci_eg20t_init,
+        },
+        {
+                .vendor         = PCI_VENDOR_ID_INTEL,
+                .device         = 0x8813,
+                .init           = pci_eg20t_init,
+        },
+        {
+                .vendor         = PCI_VENDOR_ID_INTEL,
+                .device         = 0x8814,
+                .init           = pci_eg20t_init,
+        },
+        {
+                .vendor         = 0x10DB,
+                .device         = 0x8027,
+                .init           = pci_eg20t_init,
+        },
+        {
+                .vendor         = 0x10DB,
+                .device         = 0x8028,
+                .init           = pci_eg20t_init,
+        },
+        {
+                .vendor         = 0x10DB,
+                .device         = 0x8029,
+                .init           = pci_eg20t_init,
+        },
+        {
+                .vendor         = 0x10DB,
+                .device         = 0x800C,
+                .init           = pci_eg20t_init,
+        },
+        {
+                .vendor         = 0x10DB,
+                .device         = 0x800D,
+                .init           = pci_eg20t_init,
+        },
+        {
+                .vendor         = 0x10DB,
+                .device         = 0x800D,
+                .init           = pci_eg20t_init,
+        },
         /*
          * Cronyx Omega PCI (PLX-chip based)
          */