4 files changed, 38 insertions, 6 deletions

diff --git a/drivers/tty/serial/8250/8250.c b/drivers/tty/serial/8250/8250_core.c
index e5ddfd6fc468..46528d57be72 100644
--- a/drivers/tty/serial/8250/8250.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -3422,6 +3422,7 @@ MODULE_PARM_DESC(probe_rsa, "Probe I/O ports for RSA");
 #endif
 MODULE_ALIAS_CHARDEV_MAJOR(TTY_MAJOR);
 
+#ifdef CONFIG_SERIAL_8250_DEPRECATED_OPTIONS
 #ifndef MODULE
 /* This module was renamed to 8250_core in 3.7.  Keep the old "8250" name
  * working as well for the module options so we don't break people.  We
@@ -3436,7 +3437,7 @@ MODULE_ALIAS_CHARDEV_MAJOR(TTY_MAJOR);
 static void __used s8250_options(void)
 {
 #undef MODULE_PARAM_PREFIX
-#define MODULE_PARAM_PREFIX "8250."
+#define MODULE_PARAM_PREFIX "8250_core."
 
         module_param_cb(share_irqs, &param_ops_uint, &share_irqs, 0644);
         module_param_cb(nr_uarts, &param_ops_uint, &nr_uarts, 0644);
@@ -3448,5 +3449,6 @@ static void __used s8250_options(void)
 #endif
 }
 #else
-MODULE_ALIAS("8250");
+MODULE_ALIAS("8250_core");
+#endif
 #endif
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index aa76825229dc..26e3a97ab157 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -1554,6 +1554,7 @@ pci_wch_ch353_setup(struct serial_private *priv,
 #define PCI_DEVICE_ID_PLX_CRONYX_OMEGA  0xc001
 #define PCI_DEVICE_ID_INTEL_PATSBURG_KT 0x1d3d
 #define PCI_VENDOR_ID_WCH               0x4348
+#define PCI_DEVICE_ID_WCH_CH352_2S      0x3253
 #define PCI_DEVICE_ID_WCH_CH353_4S      0x3453
 #define PCI_DEVICE_ID_WCH_CH353_2S1PF   0x5046
 #define PCI_DEVICE_ID_WCH_CH353_2S1P    0x7053
@@ -2172,6 +2173,14 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
                 .subdevice      = PCI_ANY_ID,
                 .setup          = pci_wch_ch353_setup,
         },
+        /* WCH CH352 2S card (16550 clone) */
+        {
+                .vendor         = PCI_VENDOR_ID_WCH,
+                .device         = PCI_DEVICE_ID_WCH_CH352_2S,
+                .subvendor      = PCI_ANY_ID,
+                .subdevice      = PCI_ANY_ID,
+                .setup          = pci_wch_ch353_setup,
+        },
         /*
          * ASIX devices with FIFO bug
          */
@@ -4870,6 +4879,10 @@ static struct pci_device_id serial_pci_tbl[] = {
                 PCI_ANY_ID, PCI_ANY_ID,
                 0, 0, pbn_b0_bt_2_115200 },
 
+        {       PCI_VENDOR_ID_WCH, PCI_DEVICE_ID_WCH_CH352_2S,
+                PCI_ANY_ID, PCI_ANY_ID,
+                0, 0, pbn_b0_bt_2_115200 },
+
         /*
          * Commtech, Inc. Fastcom adapters
          */
diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
index 2ef9537bcb2c..80fe91e64a52 100644
--- a/drivers/tty/serial/8250/Kconfig
+++ b/drivers/tty/serial/8250/Kconfig
@@ -33,6 +33,23 @@ config SERIAL_8250
           Most people will say Y or M here, so that they can use serial mice,
           modems and similar devices connecting to the standard serial ports.
 
+config SERIAL_8250_DEPRECATED_OPTIONS
+        bool "Support 8250_core.* kernel options (DEPRECATED)"
+        depends on SERIAL_8250
+        default y
+        ---help---
+          In 3.7 we renamed 8250 to 8250_core by mistake, so now we have to
+          accept kernel parameters in both forms like 8250_core.nr_uarts=4 and
+          8250.nr_uarts=4. We now renamed the module back to 8250, but if
+          anybody noticed in 3.7 and changed their userspace we still have to
+          keep the 8350_core.* options around until they revert the changes
+          they already did.
+
+          If 8250 is built as a module, this adds 8250_core alias instead. 
+
+          If you did not notice yet and/or you have userspace from pre-3.7, it
+          is safe (and recommended) to say N here.
+
 config SERIAL_8250_PNP
         bool "8250/16550 PNP device support" if EXPERT
         depends on SERIAL_8250 && PNP
diff --git a/drivers/tty/serial/8250/Makefile b/drivers/tty/serial/8250/Makefile
index a23838a4d535..36d68d054307 100644
--- a/drivers/tty/serial/8250/Makefile
+++ b/drivers/tty/serial/8250/Makefile
@@ -2,10 +2,10 @@
 # Makefile for the 8250 serial device drivers.
 #
 
-obj-$(CONFIG_SERIAL_8250)               += 8250_core.o
-8250_core-y                             := 8250.o
-8250_core-$(CONFIG_SERIAL_8250_PNP)     += 8250_pnp.o
-8250_core-$(CONFIG_SERIAL_8250_DMA)     += 8250_dma.o
+obj-$(CONFIG_SERIAL_8250)               += 8250.o
+8250-y                                  := 8250_core.o
+8250-$(CONFIG_SERIAL_8250_PNP)          += 8250_pnp.o
+8250-$(CONFIG_SERIAL_8250_DMA)          += 8250_dma.o
 obj-$(CONFIG_SERIAL_8250_GSC)           += 8250_gsc.o
 obj-$(CONFIG_SERIAL_8250_PCI)           += 8250_pci.o
 obj-$(CONFIG_SERIAL_8250_HP300)         += 8250_hp300.o