diff options
Diffstat (limited to 'drivers/spi')
-rw-r--r-- | drivers/spi/Kconfig | 30 | ||||
-rw-r--r-- | drivers/spi/Makefile | 9 | ||||
-rw-r--r-- | drivers/spi/amba-pl022.c | 751 | ||||
-rw-r--r-- | drivers/spi/atmel_spi.c | 14 | ||||
-rw-r--r-- | drivers/spi/omap2_mcspi.c | 81 | ||||
-rw-r--r-- | drivers/spi/orion_spi.c | 4 | ||||
-rw-r--r-- | drivers/spi/spi_bfin5xx.c | 844 | ||||
-rw-r--r-- | drivers/spi/spi_fsl_espi.c | 748 | ||||
-rw-r--r-- | drivers/spi/spi_fsl_lib.c | 237 | ||||
-rw-r--r-- | drivers/spi/spi_fsl_lib.h | 124 | ||||
-rw-r--r-- | drivers/spi/spi_fsl_spi.c (renamed from drivers/spi/spi_mpc8xxx.c) | 552 | ||||
-rw-r--r-- | drivers/spi/spi_s3c64xx.c | 158 | ||||
-rw-r--r-- | drivers/spi/spi_topcliff_pch.c | 1303 |
13 files changed, 3736 insertions, 1119 deletions
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 91c2f4f3af10..9949c252c23d 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig | |||
@@ -182,12 +182,27 @@ config SPI_MPC512x_PSC | |||
182 | This enables using the Freescale MPC5121 Programmable Serial | 182 | This enables using the Freescale MPC5121 Programmable Serial |
183 | Controller in SPI master mode. | 183 | Controller in SPI master mode. |
184 | 184 | ||
185 | config SPI_MPC8xxx | 185 | config SPI_FSL_LIB |
186 | tristate "Freescale MPC8xxx SPI controller" | 186 | tristate |
187 | depends on FSL_SOC | 187 | depends on FSL_SOC |
188 | |||
189 | config SPI_FSL_SPI | ||
190 | tristate "Freescale SPI controller" | ||
191 | depends on FSL_SOC | ||
192 | select SPI_FSL_LIB | ||
188 | help | 193 | help |
189 | This enables using the Freescale MPC8xxx SPI controllers in master | 194 | This enables using the Freescale SPI controllers in master mode. |
190 | mode. | 195 | MPC83xx platform uses the controller in cpu mode or CPM/QE mode. |
196 | MPC8569 uses the controller in QE mode, MPC8610 in cpu mode. | ||
197 | |||
198 | config SPI_FSL_ESPI | ||
199 | tristate "Freescale eSPI controller" | ||
200 | depends on FSL_SOC | ||
201 | select SPI_FSL_LIB | ||
202 | help | ||
203 | This enables using the Freescale eSPI controllers in master mode. | ||
204 | From MPC8536, 85xx platform uses the controller, and all P10xx, | ||
205 | P20xx, P30xx,P40xx, P50xx uses this controller. | ||
191 | 206 | ||
192 | config SPI_OMAP_UWIRE | 207 | config SPI_OMAP_UWIRE |
193 | tristate "OMAP1 MicroWire" | 208 | tristate "OMAP1 MicroWire" |
@@ -298,6 +313,13 @@ config SPI_STMP3XXX | |||
298 | help | 313 | help |
299 | SPI driver for Freescale STMP37xx/378x SoC SSP interface | 314 | SPI driver for Freescale STMP37xx/378x SoC SSP interface |
300 | 315 | ||
316 | config SPI_TOPCLIFF_PCH | ||
317 | tristate "Topcliff PCH SPI Controller" | ||
318 | depends on PCI | ||
319 | help | ||
320 | SPI driver for the Topcliff PCH (Platform Controller Hub) SPI bus | ||
321 | used in some x86 embedded processors. | ||
322 | |||
301 | config SPI_TXX9 | 323 | config SPI_TXX9 |
302 | tristate "Toshiba TXx9 SPI controller" | 324 | tristate "Toshiba TXx9 SPI controller" |
303 | depends on GENERIC_GPIO && CPU_TX49XX | 325 | depends on GENERIC_GPIO && CPU_TX49XX |
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index e9cbd18217a0..557aaadf56b2 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile | |||
@@ -2,9 +2,7 @@ | |||
2 | # Makefile for kernel SPI drivers. | 2 | # Makefile for kernel SPI drivers. |
3 | # | 3 | # |
4 | 4 | ||
5 | ifeq ($(CONFIG_SPI_DEBUG),y) | 5 | ccflags-$(CONFIG_SPI_DEBUG) := -DDEBUG |
6 | EXTRA_CFLAGS += -DDEBUG | ||
7 | endif | ||
8 | 6 | ||
9 | # small core, mostly translating board-specific | 7 | # small core, mostly translating board-specific |
10 | # config declarations into driver model code | 8 | # config declarations into driver model code |
@@ -34,11 +32,14 @@ obj-$(CONFIG_SPI_PL022) += amba-pl022.o | |||
34 | obj-$(CONFIG_SPI_MPC512x_PSC) += mpc512x_psc_spi.o | 32 | obj-$(CONFIG_SPI_MPC512x_PSC) += mpc512x_psc_spi.o |
35 | obj-$(CONFIG_SPI_MPC52xx_PSC) += mpc52xx_psc_spi.o | 33 | obj-$(CONFIG_SPI_MPC52xx_PSC) += mpc52xx_psc_spi.o |
36 | obj-$(CONFIG_SPI_MPC52xx) += mpc52xx_spi.o | 34 | obj-$(CONFIG_SPI_MPC52xx) += mpc52xx_spi.o |
37 | obj-$(CONFIG_SPI_MPC8xxx) += spi_mpc8xxx.o | 35 | obj-$(CONFIG_SPI_FSL_LIB) += spi_fsl_lib.o |
36 | obj-$(CONFIG_SPI_FSL_ESPI) += spi_fsl_espi.o | ||
37 | obj-$(CONFIG_SPI_FSL_SPI) += spi_fsl_spi.o | ||
38 | obj-$(CONFIG_SPI_PPC4xx) += spi_ppc4xx.o | 38 | obj-$(CONFIG_SPI_PPC4xx) += spi_ppc4xx.o |
39 | obj-$(CONFIG_SPI_S3C24XX_GPIO) += spi_s3c24xx_gpio.o | 39 | obj-$(CONFIG_SPI_S3C24XX_GPIO) += spi_s3c24xx_gpio.o |
40 | obj-$(CONFIG_SPI_S3C24XX) += spi_s3c24xx_hw.o | 40 | obj-$(CONFIG_SPI_S3C24XX) += spi_s3c24xx_hw.o |
41 | obj-$(CONFIG_SPI_S3C64XX) += spi_s3c64xx.o | 41 | obj-$(CONFIG_SPI_S3C64XX) += spi_s3c64xx.o |
42 | obj-$(CONFIG_SPI_TOPCLIFF_PCH) += spi_topcliff_pch.o | ||
42 | obj-$(CONFIG_SPI_TXX9) += spi_txx9.o | 43 | obj-$(CONFIG_SPI_TXX9) += spi_txx9.o |
43 | obj-$(CONFIG_SPI_XILINX) += xilinx_spi.o | 44 | obj-$(CONFIG_SPI_XILINX) += xilinx_spi.o |
44 | obj-$(CONFIG_SPI_XILINX_OF) += xilinx_spi_of.o | 45 | obj-$(CONFIG_SPI_XILINX_OF) += xilinx_spi_of.o |
diff --git a/drivers/spi/amba-pl022.c b/drivers/spi/amba-pl022.c index 4c37c4e28647..fb3d1b31772d 100644 --- a/drivers/spi/amba-pl022.c +++ b/drivers/spi/amba-pl022.c | |||
@@ -27,7 +27,6 @@ | |||
27 | /* | 27 | /* |
28 | * TODO: | 28 | * TODO: |
29 | * - add timeout on polled transfers | 29 | * - add timeout on polled transfers |
30 | * - add generic DMA framework support | ||
31 | */ | 30 | */ |
32 | 31 | ||
33 | #include <linux/init.h> | 32 | #include <linux/init.h> |
@@ -45,6 +44,9 @@ | |||
45 | #include <linux/amba/pl022.h> | 44 | #include <linux/amba/pl022.h> |
46 | #include <linux/io.h> | 45 | #include <linux/io.h> |
47 | #include <linux/slab.h> | 46 | #include <linux/slab.h> |
47 | #include <linux/dmaengine.h> | ||
48 | #include <linux/dma-mapping.h> | ||
49 | #include <linux/scatterlist.h> | ||
48 | 50 | ||
49 | /* | 51 | /* |
50 | * This macro is used to define some register default values. | 52 | * This macro is used to define some register default values. |
@@ -381,6 +383,14 @@ struct pl022 { | |||
381 | enum ssp_reading read; | 383 | enum ssp_reading read; |
382 | enum ssp_writing write; | 384 | enum ssp_writing write; |
383 | u32 exp_fifo_level; | 385 | u32 exp_fifo_level; |
386 | /* DMA settings */ | ||
387 | #ifdef CONFIG_DMA_ENGINE | ||
388 | struct dma_chan *dma_rx_channel; | ||
389 | struct dma_chan *dma_tx_channel; | ||
390 | struct sg_table sgt_rx; | ||
391 | struct sg_table sgt_tx; | ||
392 | char *dummypage; | ||
393 | #endif | ||
384 | }; | 394 | }; |
385 | 395 | ||
386 | /** | 396 | /** |
@@ -406,7 +416,7 @@ struct chip_data { | |||
406 | u16 dmacr; | 416 | u16 dmacr; |
407 | u16 cpsr; | 417 | u16 cpsr; |
408 | u8 n_bytes; | 418 | u8 n_bytes; |
409 | u8 enable_dma:1; | 419 | bool enable_dma; |
410 | enum ssp_reading read; | 420 | enum ssp_reading read; |
411 | enum ssp_writing write; | 421 | enum ssp_writing write; |
412 | void (*cs_control) (u32 command); | 422 | void (*cs_control) (u32 command); |
@@ -763,6 +773,371 @@ static void *next_transfer(struct pl022 *pl022) | |||
763 | } | 773 | } |
764 | return STATE_DONE; | 774 | return STATE_DONE; |
765 | } | 775 | } |
776 | |||
777 | /* | ||
778 | * This DMA functionality is only compiled in if we have | ||
779 | * access to the generic DMA devices/DMA engine. | ||
780 | */ | ||
781 | #ifdef CONFIG_DMA_ENGINE | ||
782 | static void unmap_free_dma_scatter(struct pl022 *pl022) | ||
783 | { | ||
784 | /* Unmap and free the SG tables */ | ||
785 | dma_unmap_sg(&pl022->adev->dev, pl022->sgt_tx.sgl, | ||
786 | pl022->sgt_tx.nents, DMA_TO_DEVICE); | ||
787 | dma_unmap_sg(&pl022->adev->dev, pl022->sgt_rx.sgl, | ||
788 | pl022->sgt_rx.nents, DMA_FROM_DEVICE); | ||
789 | sg_free_table(&pl022->sgt_rx); | ||
790 | sg_free_table(&pl022->sgt_tx); | ||
791 | } | ||
792 | |||
793 | static void dma_callback(void *data) | ||
794 | { | ||
795 | struct pl022 *pl022 = data; | ||
796 | struct spi_message *msg = pl022->cur_msg; | ||
797 | |||
798 | BUG_ON(!pl022->sgt_rx.sgl); | ||
799 | |||
800 | #ifdef VERBOSE_DEBUG | ||
801 | /* | ||
802 | * Optionally dump out buffers to inspect contents, this is | ||
803 | * good if you want to convince yourself that the loopback | ||
804 | * read/write contents are the same, when adopting to a new | ||
805 | * DMA engine. | ||
806 | */ | ||
807 | { | ||
808 | struct scatterlist *sg; | ||
809 | unsigned int i; | ||
810 | |||
811 | dma_sync_sg_for_cpu(&pl022->adev->dev, | ||
812 | pl022->sgt_rx.sgl, | ||
813 | pl022->sgt_rx.nents, | ||
814 | DMA_FROM_DEVICE); | ||
815 | |||
816 | for_each_sg(pl022->sgt_rx.sgl, sg, pl022->sgt_rx.nents, i) { | ||
817 | dev_dbg(&pl022->adev->dev, "SPI RX SG ENTRY: %d", i); | ||
818 | print_hex_dump(KERN_ERR, "SPI RX: ", | ||
819 | DUMP_PREFIX_OFFSET, | ||
820 | 16, | ||
821 | 1, | ||
822 | sg_virt(sg), | ||
823 | sg_dma_len(sg), | ||
824 | 1); | ||
825 | } | ||
826 | for_each_sg(pl022->sgt_tx.sgl, sg, pl022->sgt_tx.nents, i) { | ||
827 | dev_dbg(&pl022->adev->dev, "SPI TX SG ENTRY: %d", i); | ||
828 | print_hex_dump(KERN_ERR, "SPI TX: ", | ||
829 | DUMP_PREFIX_OFFSET, | ||
830 | 16, | ||
831 | 1, | ||
832 | sg_virt(sg), | ||
833 | sg_dma_len(sg), | ||
834 | 1); | ||
835 | } | ||
836 | } | ||
837 | #endif | ||
838 | |||
839 | unmap_free_dma_scatter(pl022); | ||
840 | |||
841 | /* Update total bytes transfered */ | ||
842 | msg->actual_length += pl022->cur_transfer->len; | ||
843 | if (pl022->cur_transfer->cs_change) | ||
844 | pl022->cur_chip-> | ||
845 | cs_control(SSP_CHIP_DESELECT); | ||
846 | |||
847 | /* Move to next transfer */ | ||
848 | msg->state = next_transfer(pl022); | ||
849 | tasklet_schedule(&pl022->pump_transfers); | ||
850 | } | ||
851 | |||
852 | static void setup_dma_scatter(struct pl022 *pl022, | ||
853 | void *buffer, | ||
854 | unsigned int length, | ||
855 | struct sg_table *sgtab) | ||
856 | { | ||
857 | struct scatterlist *sg; | ||
858 | int bytesleft = length; | ||
859 | void *bufp = buffer; | ||
860 | int mapbytes; | ||
861 | int i; | ||
862 | |||
863 | if (buffer) { | ||
864 | for_each_sg(sgtab->sgl, sg, sgtab->nents, i) { | ||
865 | /* | ||
866 | * If there are less bytes left than what fits | ||
867 | * in the current page (plus page alignment offset) | ||
868 | * we just feed in this, else we stuff in as much | ||
869 | * as we can. | ||
870 | */ | ||
871 | if (bytesleft < (PAGE_SIZE - offset_in_page(bufp))) | ||
872 | mapbytes = bytesleft; | ||
873 | else | ||
874 | mapbytes = PAGE_SIZE - offset_in_page(bufp); | ||
875 | sg_set_page(sg, virt_to_page(bufp), | ||
876 | mapbytes, offset_in_page(bufp)); | ||
877 | bufp += mapbytes; | ||
878 | bytesleft -= mapbytes; | ||
879 | dev_dbg(&pl022->adev->dev, | ||
880 | "set RX/TX target page @ %p, %d bytes, %d left\n", | ||
881 | bufp, mapbytes, bytesleft); | ||
882 | } | ||
883 | } else { | ||
884 | /* Map the dummy buffer on every page */ | ||
885 | for_each_sg(sgtab->sgl, sg, sgtab->nents, i) { | ||
886 | if (bytesleft < PAGE_SIZE) | ||
887 | mapbytes = bytesleft; | ||
888 | else | ||
889 | mapbytes = PAGE_SIZE; | ||
890 | sg_set_page(sg, virt_to_page(pl022->dummypage), | ||
891 | mapbytes, 0); | ||
892 | bytesleft -= mapbytes; | ||
893 | dev_dbg(&pl022->adev->dev, | ||
894 | "set RX/TX to dummy page %d bytes, %d left\n", | ||
895 | mapbytes, bytesleft); | ||
896 | |||
897 | } | ||
898 | } | ||
899 | BUG_ON(bytesleft); | ||
900 | } | ||
901 | |||
902 | /** | ||
903 | * configure_dma - configures the channels for the next transfer | ||
904 | * @pl022: SSP driver's private data structure | ||
905 | */ | ||
906 | static int configure_dma(struct pl022 *pl022) | ||
907 | { | ||
908 | struct dma_slave_config rx_conf = { | ||
909 | .src_addr = SSP_DR(pl022->phybase), | ||
910 | .direction = DMA_FROM_DEVICE, | ||
911 | .src_maxburst = pl022->vendor->fifodepth >> 1, | ||
912 | }; | ||
913 | struct dma_slave_config tx_conf = { | ||
914 | .dst_addr = SSP_DR(pl022->phybase), | ||
915 | .direction = DMA_TO_DEVICE, | ||
916 | .dst_maxburst = pl022->vendor->fifodepth >> 1, | ||
917 | }; | ||
918 | unsigned int pages; | ||
919 | int ret; | ||
920 | int sglen; | ||
921 | struct dma_chan *rxchan = pl022->dma_rx_channel; | ||
922 | struct dma_chan *txchan = pl022->dma_tx_channel; | ||
923 | struct dma_async_tx_descriptor *rxdesc; | ||
924 | struct dma_async_tx_descriptor *txdesc; | ||
925 | dma_cookie_t cookie; | ||
926 | |||
927 | /* Check that the channels are available */ | ||
928 | if (!rxchan || !txchan) | ||
929 | return -ENODEV; | ||
930 | |||
931 | switch (pl022->read) { | ||
932 | case READING_NULL: | ||
933 | /* Use the same as for writing */ | ||
934 | rx_conf.src_addr_width = DMA_SLAVE_BUSWIDTH_UNDEFINED; | ||
935 | break; | ||
936 | case READING_U8: | ||
937 | rx_conf.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; | ||
938 | break; | ||
939 | case READING_U16: | ||
940 | rx_conf.src_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES; | ||
941 | break; | ||
942 | case READING_U32: | ||
943 | rx_conf.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; | ||
944 | break; | ||
945 | } | ||
946 | |||
947 | switch (pl022->write) { | ||
948 | case WRITING_NULL: | ||
949 | /* Use the same as for reading */ | ||
950 | tx_conf.dst_addr_width = DMA_SLAVE_BUSWIDTH_UNDEFINED; | ||
951 | break; | ||
952 | case WRITING_U8: | ||
953 | tx_conf.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; | ||
954 | break; | ||
955 | case WRITING_U16: | ||
956 | tx_conf.dst_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES; | ||
957 | break; | ||
958 | case WRITING_U32: | ||
959 | tx_conf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;; | ||
960 | break; | ||
961 | } | ||
962 | |||
963 | /* SPI pecularity: we need to read and write the same width */ | ||
964 | if (rx_conf.src_addr_width == DMA_SLAVE_BUSWIDTH_UNDEFINED) | ||
965 | rx_conf.src_addr_width = tx_conf.dst_addr_width; | ||
966 | if (tx_conf.dst_addr_width == DMA_SLAVE_BUSWIDTH_UNDEFINED) | ||
967 | tx_conf.dst_addr_width = rx_conf.src_addr_width; | ||
968 | BUG_ON(rx_conf.src_addr_width != tx_conf.dst_addr_width); | ||
969 | |||
970 | rxchan->device->device_control(rxchan, DMA_SLAVE_CONFIG, | ||
971 | (unsigned long) &rx_conf); | ||
972 | txchan->device->device_control(txchan, DMA_SLAVE_CONFIG, | ||
973 | (unsigned long) &tx_conf); | ||
974 | |||
975 | /* Create sglists for the transfers */ | ||
976 | pages = (pl022->cur_transfer->len >> PAGE_SHIFT) + 1; | ||
977 | dev_dbg(&pl022->adev->dev, "using %d pages for transfer\n", pages); | ||
978 | |||
979 | ret = sg_alloc_table(&pl022->sgt_rx, pages, GFP_KERNEL); | ||
980 | if (ret) | ||
981 | goto err_alloc_rx_sg; | ||
982 | |||
983 | ret = sg_alloc_table(&pl022->sgt_tx, pages, GFP_KERNEL); | ||
984 | if (ret) | ||
985 | goto err_alloc_tx_sg; | ||
986 | |||
987 | /* Fill in the scatterlists for the RX+TX buffers */ | ||
988 | setup_dma_scatter(pl022, pl022->rx, | ||
989 | pl022->cur_transfer->len, &pl022->sgt_rx); | ||
990 | setup_dma_scatter(pl022, pl022->tx, | ||
991 | pl022->cur_transfer->len, &pl022->sgt_tx); | ||
992 | |||
993 | /* Map DMA buffers */ | ||
994 | sglen = dma_map_sg(&pl022->adev->dev, pl022->sgt_rx.sgl, | ||
995 | pl022->sgt_rx.nents, DMA_FROM_DEVICE); | ||
996 | if (!sglen) | ||
997 | goto err_rx_sgmap; | ||
998 | |||
999 | sglen = dma_map_sg(&pl022->adev->dev, pl022->sgt_tx.sgl, | ||
1000 | pl022->sgt_tx.nents, DMA_TO_DEVICE); | ||
1001 | if (!sglen) | ||
1002 | goto err_tx_sgmap; | ||
1003 | |||
1004 | /* Send both scatterlists */ | ||
1005 | rxdesc = rxchan->device->device_prep_slave_sg(rxchan, | ||
1006 | pl022->sgt_rx.sgl, | ||
1007 | pl022->sgt_rx.nents, | ||
1008 | DMA_FROM_DEVICE, | ||
1009 | DMA_PREP_INTERRUPT | DMA_CTRL_ACK); | ||
1010 | if (!rxdesc) | ||
1011 | goto err_rxdesc; | ||
1012 | |||
1013 | txdesc = txchan->device->device_prep_slave_sg(txchan, | ||
1014 | pl022->sgt_tx.sgl, | ||
1015 | pl022->sgt_tx.nents, | ||
1016 | DMA_TO_DEVICE, | ||
1017 | DMA_PREP_INTERRUPT | DMA_CTRL_ACK); | ||
1018 | if (!txdesc) | ||
1019 | goto err_txdesc; | ||
1020 | |||
1021 | /* Put the callback on the RX transfer only, that should finish last */ | ||
1022 | rxdesc->callback = dma_callback; | ||
1023 | rxdesc->callback_param = pl022; | ||
1024 | |||
1025 | /* Submit and fire RX and TX with TX last so we're ready to read! */ | ||
1026 | cookie = rxdesc->tx_submit(rxdesc); | ||
1027 | if (dma_submit_error(cookie)) | ||
1028 | goto err_submit_rx; | ||
1029 | cookie = txdesc->tx_submit(txdesc); | ||
1030 | if (dma_submit_error(cookie)) | ||
1031 | goto err_submit_tx; | ||
1032 | rxchan->device->device_issue_pending(rxchan); | ||
1033 | txchan->device->device_issue_pending(txchan); | ||
1034 | |||
1035 | return 0; | ||
1036 | |||
1037 | err_submit_tx: | ||
1038 | err_submit_rx: | ||
1039 | err_txdesc: | ||
1040 | txchan->device->device_control(txchan, DMA_TERMINATE_ALL, 0); | ||
1041 | err_rxdesc: | ||
1042 | rxchan->device->device_control(rxchan, DMA_TERMINATE_ALL, 0); | ||
1043 | dma_unmap_sg(&pl022->adev->dev, pl022->sgt_tx.sgl, | ||
1044 | pl022->sgt_tx.nents, DMA_TO_DEVICE); | ||
1045 | err_tx_sgmap: | ||
1046 | dma_unmap_sg(&pl022->adev->dev, pl022->sgt_rx.sgl, | ||
1047 | pl022->sgt_tx.nents, DMA_FROM_DEVICE); | ||
1048 | err_rx_sgmap: | ||
1049 | sg_free_table(&pl022->sgt_tx); | ||
1050 | err_alloc_tx_sg: | ||
1051 | sg_free_table(&pl022->sgt_rx); | ||
1052 | err_alloc_rx_sg: | ||
1053 | return -ENOMEM; | ||
1054 | } | ||
1055 | |||
1056 | static int __init pl022_dma_probe(struct pl022 *pl022) | ||
1057 | { | ||
1058 | dma_cap_mask_t mask; | ||
1059 | |||
1060 | /* Try to acquire a generic DMA engine slave channel */ | ||
1061 | dma_cap_zero(mask); | ||
1062 | dma_cap_set(DMA_SLAVE, mask); | ||
1063 | /* | ||
1064 | * We need both RX and TX channels to do DMA, else do none | ||
1065 | * of them. | ||
1066 | */ | ||
1067 | pl022->dma_rx_channel = dma_request_channel(mask, | ||
1068 | pl022->master_info->dma_filter, | ||
1069 | pl022->master_info->dma_rx_param); | ||
1070 | if (!pl022->dma_rx_channel) { | ||
1071 | dev_err(&pl022->adev->dev, "no RX DMA channel!\n"); | ||
1072 | goto err_no_rxchan; | ||
1073 | } | ||
1074 | |||
1075 | pl022->dma_tx_channel = dma_request_channel(mask, | ||
1076 | pl022->master_info->dma_filter, | ||
1077 | pl022->master_info->dma_tx_param); | ||
1078 | if (!pl022->dma_tx_channel) { | ||
1079 | dev_err(&pl022->adev->dev, "no TX DMA channel!\n"); | ||
1080 | goto err_no_txchan; | ||
1081 | } | ||
1082 | |||
1083 | pl022->dummypage = kmalloc(PAGE_SIZE, GFP_KERNEL); | ||
1084 | if (!pl022->dummypage) { | ||
1085 | dev_err(&pl022->adev->dev, "no DMA dummypage!\n"); | ||
1086 | goto err_no_dummypage; | ||
1087 | } | ||
1088 | |||
1089 | dev_info(&pl022->adev->dev, "setup for DMA on RX %s, TX %s\n", | ||
1090 | dma_chan_name(pl022->dma_rx_channel), | ||
1091 | dma_chan_name(pl022->dma_tx_channel)); | ||
1092 | |||
1093 | return 0; | ||
1094 | |||
1095 | err_no_dummypage: | ||
1096 | dma_release_channel(pl022->dma_tx_channel); | ||
1097 | err_no_txchan: | ||
1098 | dma_release_channel(pl022->dma_rx_channel); | ||
1099 | pl022->dma_rx_channel = NULL; | ||
1100 | err_no_rxchan: | ||
1101 | return -ENODEV; | ||
1102 | } | ||
1103 | |||
1104 | static void terminate_dma(struct pl022 *pl022) | ||
1105 | { | ||
1106 | struct dma_chan *rxchan = pl022->dma_rx_channel; | ||
1107 | struct dma_chan *txchan = pl022->dma_tx_channel; | ||
1108 | |||
1109 | rxchan->device->device_control(rxchan, DMA_TERMINATE_ALL, 0); | ||
1110 | txchan->device->device_control(txchan, DMA_TERMINATE_ALL, 0); | ||
1111 | unmap_free_dma_scatter(pl022); | ||
1112 | } | ||
1113 | |||
1114 | static void pl022_dma_remove(struct pl022 *pl022) | ||
1115 | { | ||
1116 | if (pl022->busy) | ||
1117 | terminate_dma(pl022); | ||
1118 | if (pl022->dma_tx_channel) | ||
1119 | dma_release_channel(pl022->dma_tx_channel); | ||
1120 | if (pl022->dma_rx_channel) | ||
1121 | dma_release_channel(pl022->dma_rx_channel); | ||
1122 | kfree(pl022->dummypage); | ||
1123 | } | ||
1124 | |||
1125 | #else | ||
1126 | static inline int configure_dma(struct pl022 *pl022) | ||
1127 | { | ||
1128 | return -ENODEV; | ||
1129 | } | ||
1130 | |||
1131 | static inline int pl022_dma_probe(struct pl022 *pl022) | ||
1132 | { | ||
1133 | return 0; | ||
1134 | } | ||
1135 | |||
1136 | static inline void pl022_dma_remove(struct pl022 *pl022) | ||
1137 | { | ||
1138 | } | ||
1139 | #endif | ||
1140 | |||
766 | /** | 1141 | /** |
767 | * pl022_interrupt_handler - Interrupt handler for SSP controller | 1142 | * pl022_interrupt_handler - Interrupt handler for SSP controller |
768 | * | 1143 | * |
@@ -794,14 +1169,17 @@ static irqreturn_t pl022_interrupt_handler(int irq, void *dev_id) | |||
794 | if (unlikely(!irq_status)) | 1169 | if (unlikely(!irq_status)) |
795 | return IRQ_NONE; | 1170 | return IRQ_NONE; |
796 | 1171 | ||
797 | /* This handles the error code interrupts */ | 1172 | /* |
1173 | * This handles the FIFO interrupts, the timeout | ||
1174 | * interrupts are flatly ignored, they cannot be | ||
1175 | * trusted. | ||
1176 | */ | ||
798 | if (unlikely(irq_status & SSP_MIS_MASK_RORMIS)) { | 1177 | if (unlikely(irq_status & SSP_MIS_MASK_RORMIS)) { |
799 | /* | 1178 | /* |
800 | * Overrun interrupt - bail out since our Data has been | 1179 | * Overrun interrupt - bail out since our Data has been |
801 | * corrupted | 1180 | * corrupted |
802 | */ | 1181 | */ |
803 | dev_err(&pl022->adev->dev, | 1182 | dev_err(&pl022->adev->dev, "FIFO overrun\n"); |
804 | "FIFO overrun\n"); | ||
805 | if (readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_RFF) | 1183 | if (readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_RFF) |
806 | dev_err(&pl022->adev->dev, | 1184 | dev_err(&pl022->adev->dev, |
807 | "RXFIFO is full\n"); | 1185 | "RXFIFO is full\n"); |
@@ -896,8 +1274,8 @@ static int set_up_next_transfer(struct pl022 *pl022, | |||
896 | } | 1274 | } |
897 | 1275 | ||
898 | /** | 1276 | /** |
899 | * pump_transfers - Tasklet function which schedules next interrupt transfer | 1277 | * pump_transfers - Tasklet function which schedules next transfer |
900 | * when running in interrupt transfer mode. | 1278 | * when running in interrupt or DMA transfer mode. |
901 | * @data: SSP driver private data structure | 1279 | * @data: SSP driver private data structure |
902 | * | 1280 | * |
903 | */ | 1281 | */ |
@@ -954,65 +1332,23 @@ static void pump_transfers(unsigned long data) | |||
954 | } | 1332 | } |
955 | /* Flush the FIFOs and let's go! */ | 1333 | /* Flush the FIFOs and let's go! */ |
956 | flush(pl022); | 1334 | flush(pl022); |
957 | writew(ENABLE_ALL_INTERRUPTS, SSP_IMSC(pl022->virtbase)); | ||
958 | } | ||
959 | |||
960 | /** | ||
961 | * NOT IMPLEMENTED | ||
962 | * configure_dma - It configures the DMA pipes for DMA transfers | ||
963 | * @data: SSP driver's private data structure | ||
964 | * | ||
965 | */ | ||
966 | static int configure_dma(void *data) | ||
967 | { | ||
968 | struct pl022 *pl022 = data; | ||
969 | dev_dbg(&pl022->adev->dev, "configure DMA\n"); | ||
970 | return -ENOTSUPP; | ||
971 | } | ||
972 | |||
973 | /** | ||
974 | * do_dma_transfer - It handles transfers of the current message | ||
975 | * if it is DMA xfer. | ||
976 | * NOT FULLY IMPLEMENTED | ||
977 | * @data: SSP driver's private data structure | ||
978 | */ | ||
979 | static void do_dma_transfer(void *data) | ||
980 | { | ||
981 | struct pl022 *pl022 = data; | ||
982 | |||
983 | if (configure_dma(data)) { | ||
984 | dev_dbg(&pl022->adev->dev, "configuration of DMA Failed!\n"); | ||
985 | goto err_config_dma; | ||
986 | } | ||
987 | 1335 | ||
988 | /* TODO: Implememt DMA setup of pipes here */ | 1336 | if (pl022->cur_chip->enable_dma) { |
989 | 1337 | if (configure_dma(pl022)) { | |
990 | /* Enable target chip, set up transfer */ | 1338 | dev_dbg(&pl022->adev->dev, |
991 | pl022->cur_chip->cs_control(SSP_CHIP_SELECT); | 1339 | "configuration of DMA failed, fall back to interrupt mode\n"); |
992 | if (set_up_next_transfer(pl022, pl022->cur_transfer)) { | 1340 | goto err_config_dma; |
993 | /* Error path */ | 1341 | } |
994 | pl022->cur_msg->state = STATE_ERROR; | ||
995 | pl022->cur_msg->status = -EIO; | ||
996 | giveback(pl022); | ||
997 | return; | 1342 | return; |
998 | } | 1343 | } |
999 | /* Enable SSP */ | ||
1000 | writew((readw(SSP_CR1(pl022->virtbase)) | SSP_CR1_MASK_SSE), | ||
1001 | SSP_CR1(pl022->virtbase)); | ||
1002 | |||
1003 | /* TODO: Enable the DMA transfer here */ | ||
1004 | return; | ||
1005 | 1344 | ||
1006 | err_config_dma: | 1345 | err_config_dma: |
1007 | pl022->cur_msg->state = STATE_ERROR; | 1346 | writew(ENABLE_ALL_INTERRUPTS, SSP_IMSC(pl022->virtbase)); |
1008 | pl022->cur_msg->status = -EIO; | ||
1009 | giveback(pl022); | ||
1010 | return; | ||
1011 | } | 1347 | } |
1012 | 1348 | ||
1013 | static void do_interrupt_transfer(void *data) | 1349 | static void do_interrupt_dma_transfer(struct pl022 *pl022) |
1014 | { | 1350 | { |
1015 | struct pl022 *pl022 = data; | 1351 | u32 irqflags = ENABLE_ALL_INTERRUPTS; |
1016 | 1352 | ||
1017 | /* Enable target chip */ | 1353 | /* Enable target chip */ |
1018 | pl022->cur_chip->cs_control(SSP_CHIP_SELECT); | 1354 | pl022->cur_chip->cs_control(SSP_CHIP_SELECT); |
@@ -1023,15 +1359,26 @@ static void do_interrupt_transfer(void *data) | |||
1023 | giveback(pl022); | 1359 | giveback(pl022); |
1024 | return; | 1360 | return; |
1025 | } | 1361 | } |
1362 | /* If we're using DMA, set up DMA here */ | ||
1363 | if (pl022->cur_chip->enable_dma) { | ||
1364 | /* Configure DMA transfer */ | ||
1365 | if (configure_dma(pl022)) { | ||
1366 | dev_dbg(&pl022->adev->dev, | ||
1367 | "configuration of DMA failed, fall back to interrupt mode\n"); | ||
1368 | goto err_config_dma; | ||
1369 | } | ||
1370 | /* Disable interrupts in DMA mode, IRQ from DMA controller */ | ||
1371 | irqflags = DISABLE_ALL_INTERRUPTS; | ||
1372 | } | ||
1373 | err_config_dma: | ||
1026 | /* Enable SSP, turn on interrupts */ | 1374 | /* Enable SSP, turn on interrupts */ |
1027 | writew((readw(SSP_CR1(pl022->virtbase)) | SSP_CR1_MASK_SSE), | 1375 | writew((readw(SSP_CR1(pl022->virtbase)) | SSP_CR1_MASK_SSE), |
1028 | SSP_CR1(pl022->virtbase)); | 1376 | SSP_CR1(pl022->virtbase)); |
1029 | writew(ENABLE_ALL_INTERRUPTS, SSP_IMSC(pl022->virtbase)); | 1377 | writew(irqflags, SSP_IMSC(pl022->virtbase)); |
1030 | } | 1378 | } |
1031 | 1379 | ||
1032 | static void do_polling_transfer(void *data) | 1380 | static void do_polling_transfer(struct pl022 *pl022) |
1033 | { | 1381 | { |
1034 | struct pl022 *pl022 = data; | ||
1035 | struct spi_message *message = NULL; | 1382 | struct spi_message *message = NULL; |
1036 | struct spi_transfer *transfer = NULL; | 1383 | struct spi_transfer *transfer = NULL; |
1037 | struct spi_transfer *previous = NULL; | 1384 | struct spi_transfer *previous = NULL; |
@@ -1101,7 +1448,7 @@ static void do_polling_transfer(void *data) | |||
1101 | * | 1448 | * |
1102 | * This function checks if there is any spi message in the queue that | 1449 | * This function checks if there is any spi message in the queue that |
1103 | * needs processing and delegate control to appropriate function | 1450 | * needs processing and delegate control to appropriate function |
1104 | * do_polling_transfer()/do_interrupt_transfer()/do_dma_transfer() | 1451 | * do_polling_transfer()/do_interrupt_dma_transfer() |
1105 | * based on the kind of the transfer | 1452 | * based on the kind of the transfer |
1106 | * | 1453 | * |
1107 | */ | 1454 | */ |
@@ -1150,10 +1497,8 @@ static void pump_messages(struct work_struct *work) | |||
1150 | 1497 | ||
1151 | if (pl022->cur_chip->xfer_type == POLLING_TRANSFER) | 1498 | if (pl022->cur_chip->xfer_type == POLLING_TRANSFER) |
1152 | do_polling_transfer(pl022); | 1499 | do_polling_transfer(pl022); |
1153 | else if (pl022->cur_chip->xfer_type == INTERRUPT_TRANSFER) | ||
1154 | do_interrupt_transfer(pl022); | ||
1155 | else | 1500 | else |
1156 | do_dma_transfer(pl022); | 1501 | do_interrupt_dma_transfer(pl022); |
1157 | } | 1502 | } |
1158 | 1503 | ||
1159 | 1504 | ||
@@ -1248,100 +1593,56 @@ static int destroy_queue(struct pl022 *pl022) | |||
1248 | } | 1593 | } |
1249 | 1594 | ||
1250 | static int verify_controller_parameters(struct pl022 *pl022, | 1595 | static int verify_controller_parameters(struct pl022 *pl022, |
1251 | struct pl022_config_chip *chip_info) | 1596 | struct pl022_config_chip const *chip_info) |
1252 | { | 1597 | { |
1253 | if ((chip_info->lbm != LOOPBACK_ENABLED) | ||
1254 | && (chip_info->lbm != LOOPBACK_DISABLED)) { | ||
1255 | dev_err(chip_info->dev, | ||
1256 | "loopback Mode is configured incorrectly\n"); | ||
1257 | return -EINVAL; | ||
1258 | } | ||
1259 | if ((chip_info->iface < SSP_INTERFACE_MOTOROLA_SPI) | 1598 | if ((chip_info->iface < SSP_INTERFACE_MOTOROLA_SPI) |
1260 | || (chip_info->iface > SSP_INTERFACE_UNIDIRECTIONAL)) { | 1599 | || (chip_info->iface > SSP_INTERFACE_UNIDIRECTIONAL)) { |
1261 | dev_err(chip_info->dev, | 1600 | dev_err(&pl022->adev->dev, |
1262 | "interface is configured incorrectly\n"); | 1601 | "interface is configured incorrectly\n"); |
1263 | return -EINVAL; | 1602 | return -EINVAL; |
1264 | } | 1603 | } |
1265 | if ((chip_info->iface == SSP_INTERFACE_UNIDIRECTIONAL) && | 1604 | if ((chip_info->iface == SSP_INTERFACE_UNIDIRECTIONAL) && |
1266 | (!pl022->vendor->unidir)) { | 1605 | (!pl022->vendor->unidir)) { |
1267 | dev_err(chip_info->dev, | 1606 | dev_err(&pl022->adev->dev, |
1268 | "unidirectional mode not supported in this " | 1607 | "unidirectional mode not supported in this " |
1269 | "hardware version\n"); | 1608 | "hardware version\n"); |
1270 | return -EINVAL; | 1609 | return -EINVAL; |
1271 | } | 1610 | } |
1272 | if ((chip_info->hierarchy != SSP_MASTER) | 1611 | if ((chip_info->hierarchy != SSP_MASTER) |
1273 | && (chip_info->hierarchy != SSP_SLAVE)) { | 1612 | && (chip_info->hierarchy != SSP_SLAVE)) { |
1274 | dev_err(chip_info->dev, | 1613 | dev_err(&pl022->adev->dev, |
1275 | "hierarchy is configured incorrectly\n"); | 1614 | "hierarchy is configured incorrectly\n"); |
1276 | return -EINVAL; | 1615 | return -EINVAL; |
1277 | } | 1616 | } |
1278 | if (((chip_info->clk_freq).cpsdvsr < CPSDVR_MIN) | ||
1279 | || ((chip_info->clk_freq).cpsdvsr > CPSDVR_MAX)) { | ||
1280 | dev_err(chip_info->dev, | ||
1281 | "cpsdvsr is configured incorrectly\n"); | ||
1282 | return -EINVAL; | ||
1283 | } | ||
1284 | if ((chip_info->endian_rx != SSP_RX_MSB) | ||
1285 | && (chip_info->endian_rx != SSP_RX_LSB)) { | ||
1286 | dev_err(chip_info->dev, | ||
1287 | "RX FIFO endianess is configured incorrectly\n"); | ||
1288 | return -EINVAL; | ||
1289 | } | ||
1290 | if ((chip_info->endian_tx != SSP_TX_MSB) | ||
1291 | && (chip_info->endian_tx != SSP_TX_LSB)) { | ||
1292 | dev_err(chip_info->dev, | ||
1293 | "TX FIFO endianess is configured incorrectly\n"); | ||
1294 | return -EINVAL; | ||
1295 | } | ||
1296 | if ((chip_info->data_size < SSP_DATA_BITS_4) | ||
1297 | || (chip_info->data_size > SSP_DATA_BITS_32)) { | ||
1298 | dev_err(chip_info->dev, | ||
1299 | "DATA Size is configured incorrectly\n"); | ||
1300 | return -EINVAL; | ||
1301 | } | ||
1302 | if ((chip_info->com_mode != INTERRUPT_TRANSFER) | 1617 | if ((chip_info->com_mode != INTERRUPT_TRANSFER) |
1303 | && (chip_info->com_mode != DMA_TRANSFER) | 1618 | && (chip_info->com_mode != DMA_TRANSFER) |
1304 | && (chip_info->com_mode != POLLING_TRANSFER)) { | 1619 | && (chip_info->com_mode != POLLING_TRANSFER)) { |
1305 | dev_err(chip_info->dev, | 1620 | dev_err(&pl022->adev->dev, |
1306 | "Communication mode is configured incorrectly\n"); | 1621 | "Communication mode is configured incorrectly\n"); |
1307 | return -EINVAL; | 1622 | return -EINVAL; |
1308 | } | 1623 | } |
1309 | if ((chip_info->rx_lev_trig < SSP_RX_1_OR_MORE_ELEM) | 1624 | if ((chip_info->rx_lev_trig < SSP_RX_1_OR_MORE_ELEM) |
1310 | || (chip_info->rx_lev_trig > SSP_RX_32_OR_MORE_ELEM)) { | 1625 | || (chip_info->rx_lev_trig > SSP_RX_32_OR_MORE_ELEM)) { |
1311 | dev_err(chip_info->dev, | 1626 | dev_err(&pl022->adev->dev, |
1312 | "RX FIFO Trigger Level is configured incorrectly\n"); | 1627 | "RX FIFO Trigger Level is configured incorrectly\n"); |
1313 | return -EINVAL; | 1628 | return -EINVAL; |
1314 | } | 1629 | } |
1315 | if ((chip_info->tx_lev_trig < SSP_TX_1_OR_MORE_EMPTY_LOC) | 1630 | if ((chip_info->tx_lev_trig < SSP_TX_1_OR_MORE_EMPTY_LOC) |
1316 | || (chip_info->tx_lev_trig > SSP_TX_32_OR_MORE_EMPTY_LOC)) { | 1631 | || (chip_info->tx_lev_trig > SSP_TX_32_OR_MORE_EMPTY_LOC)) { |
1317 | dev_err(chip_info->dev, | 1632 | dev_err(&pl022->adev->dev, |
1318 | "TX FIFO Trigger Level is configured incorrectly\n"); | 1633 | "TX FIFO Trigger Level is configured incorrectly\n"); |
1319 | return -EINVAL; | 1634 | return -EINVAL; |
1320 | } | 1635 | } |
1321 | if (chip_info->iface == SSP_INTERFACE_MOTOROLA_SPI) { | ||
1322 | if ((chip_info->clk_phase != SSP_CLK_FIRST_EDGE) | ||
1323 | && (chip_info->clk_phase != SSP_CLK_SECOND_EDGE)) { | ||
1324 | dev_err(chip_info->dev, | ||
1325 | "Clock Phase is configured incorrectly\n"); | ||
1326 | return -EINVAL; | ||
1327 | } | ||
1328 | if ((chip_info->clk_pol != SSP_CLK_POL_IDLE_LOW) | ||
1329 | && (chip_info->clk_pol != SSP_CLK_POL_IDLE_HIGH)) { | ||
1330 | dev_err(chip_info->dev, | ||
1331 | "Clock Polarity is configured incorrectly\n"); | ||
1332 | return -EINVAL; | ||
1333 | } | ||
1334 | } | ||
1335 | if (chip_info->iface == SSP_INTERFACE_NATIONAL_MICROWIRE) { | 1636 | if (chip_info->iface == SSP_INTERFACE_NATIONAL_MICROWIRE) { |
1336 | if ((chip_info->ctrl_len < SSP_BITS_4) | 1637 | if ((chip_info->ctrl_len < SSP_BITS_4) |
1337 | || (chip_info->ctrl_len > SSP_BITS_32)) { | 1638 | || (chip_info->ctrl_len > SSP_BITS_32)) { |
1338 | dev_err(chip_info->dev, | 1639 | dev_err(&pl022->adev->dev, |
1339 | "CTRL LEN is configured incorrectly\n"); | 1640 | "CTRL LEN is configured incorrectly\n"); |
1340 | return -EINVAL; | 1641 | return -EINVAL; |
1341 | } | 1642 | } |
1342 | if ((chip_info->wait_state != SSP_MWIRE_WAIT_ZERO) | 1643 | if ((chip_info->wait_state != SSP_MWIRE_WAIT_ZERO) |
1343 | && (chip_info->wait_state != SSP_MWIRE_WAIT_ONE)) { | 1644 | && (chip_info->wait_state != SSP_MWIRE_WAIT_ONE)) { |
1344 | dev_err(chip_info->dev, | 1645 | dev_err(&pl022->adev->dev, |
1345 | "Wait State is configured incorrectly\n"); | 1646 | "Wait State is configured incorrectly\n"); |
1346 | return -EINVAL; | 1647 | return -EINVAL; |
1347 | } | 1648 | } |
@@ -1350,24 +1651,20 @@ static int verify_controller_parameters(struct pl022 *pl022, | |||
1350 | if ((chip_info->duplex != | 1651 | if ((chip_info->duplex != |
1351 | SSP_MICROWIRE_CHANNEL_FULL_DUPLEX) | 1652 | SSP_MICROWIRE_CHANNEL_FULL_DUPLEX) |
1352 | && (chip_info->duplex != | 1653 | && (chip_info->duplex != |
1353 | SSP_MICROWIRE_CHANNEL_HALF_DUPLEX)) | 1654 | SSP_MICROWIRE_CHANNEL_HALF_DUPLEX)) { |
1354 | dev_err(chip_info->dev, | 1655 | dev_err(&pl022->adev->dev, |
1355 | "Microwire duplex mode is configured incorrectly\n"); | 1656 | "Microwire duplex mode is configured incorrectly\n"); |
1356 | return -EINVAL; | 1657 | return -EINVAL; |
1658 | } | ||
1357 | } else { | 1659 | } else { |
1358 | if (chip_info->duplex != SSP_MICROWIRE_CHANNEL_FULL_DUPLEX) | 1660 | if (chip_info->duplex != SSP_MICROWIRE_CHANNEL_FULL_DUPLEX) |
1359 | dev_err(chip_info->dev, | 1661 | dev_err(&pl022->adev->dev, |
1360 | "Microwire half duplex mode requested," | 1662 | "Microwire half duplex mode requested," |
1361 | " but this is only available in the" | 1663 | " but this is only available in the" |
1362 | " ST version of PL022\n"); | 1664 | " ST version of PL022\n"); |
1363 | return -EINVAL; | 1665 | return -EINVAL; |
1364 | } | 1666 | } |
1365 | } | 1667 | } |
1366 | if (chip_info->cs_control == NULL) { | ||
1367 | dev_warn(chip_info->dev, | ||
1368 | "Chip Select Function is NULL for this chip\n"); | ||
1369 | chip_info->cs_control = null_cs_control; | ||
1370 | } | ||
1371 | return 0; | 1668 | return 0; |
1372 | } | 1669 | } |
1373 | 1670 | ||
@@ -1467,22 +1764,24 @@ static int calculate_effective_freq(struct pl022 *pl022, | |||
1467 | return 0; | 1764 | return 0; |
1468 | } | 1765 | } |
1469 | 1766 | ||
1470 | /** | 1767 | |
1471 | * NOT IMPLEMENTED | 1768 | /* |
1472 | * process_dma_info - Processes the DMA info provided by client drivers | 1769 | * A piece of default chip info unless the platform |
1473 | * @chip_info: chip info provided by client device | 1770 | * supplies it. |
1474 | * @chip: Runtime state maintained by the SSP controller for each spi device | ||
1475 | * | ||
1476 | * This function processes and stores DMA config provided by client driver | ||
1477 | * into the runtime state maintained by the SSP controller driver | ||
1478 | */ | 1771 | */ |
1479 | static int process_dma_info(struct pl022_config_chip *chip_info, | 1772 | static const struct pl022_config_chip pl022_default_chip_info = { |
1480 | struct chip_data *chip) | 1773 | .com_mode = POLLING_TRANSFER, |
1481 | { | 1774 | .iface = SSP_INTERFACE_MOTOROLA_SPI, |
1482 | dev_err(chip_info->dev, | 1775 | .hierarchy = SSP_SLAVE, |
1483 | "cannot process DMA info, DMA not implemented!\n"); | 1776 | .slave_tx_disable = DO_NOT_DRIVE_TX, |
1484 | return -ENOTSUPP; | 1777 | .rx_lev_trig = SSP_RX_1_OR_MORE_ELEM, |
1485 | } | 1778 | .tx_lev_trig = SSP_TX_1_OR_MORE_EMPTY_LOC, |
1779 | .ctrl_len = SSP_BITS_8, | ||
1780 | .wait_state = SSP_MWIRE_WAIT_ZERO, | ||
1781 | .duplex = SSP_MICROWIRE_CHANNEL_FULL_DUPLEX, | ||
1782 | .cs_control = null_cs_control, | ||
1783 | }; | ||
1784 | |||
1486 | 1785 | ||
1487 | /** | 1786 | /** |
1488 | * pl022_setup - setup function registered to SPI master framework | 1787 | * pl022_setup - setup function registered to SPI master framework |
@@ -1496,23 +1795,15 @@ static int process_dma_info(struct pl022_config_chip *chip_info, | |||
1496 | * controller hardware here, that is not done until the actual transfer | 1795 | * controller hardware here, that is not done until the actual transfer |
1497 | * commence. | 1796 | * commence. |
1498 | */ | 1797 | */ |
1499 | |||
1500 | /* FIXME: JUST GUESSING the spi->mode bits understood by this driver */ | ||
1501 | #define MODEBITS (SPI_CPOL | SPI_CPHA | SPI_CS_HIGH \ | ||
1502 | | SPI_LSB_FIRST | SPI_LOOP) | ||
1503 | |||
1504 | static int pl022_setup(struct spi_device *spi) | 1798 | static int pl022_setup(struct spi_device *spi) |
1505 | { | 1799 | { |
1506 | struct pl022_config_chip *chip_info; | 1800 | struct pl022_config_chip const *chip_info; |
1507 | struct chip_data *chip; | 1801 | struct chip_data *chip; |
1802 | struct ssp_clock_params clk_freq; | ||
1508 | int status = 0; | 1803 | int status = 0; |
1509 | struct pl022 *pl022 = spi_master_get_devdata(spi->master); | 1804 | struct pl022 *pl022 = spi_master_get_devdata(spi->master); |
1510 | 1805 | unsigned int bits = spi->bits_per_word; | |
1511 | if (spi->mode & ~MODEBITS) { | 1806 | u32 tmp; |
1512 | dev_dbg(&spi->dev, "unsupported mode bits %x\n", | ||
1513 | spi->mode & ~MODEBITS); | ||
1514 | return -EINVAL; | ||
1515 | } | ||
1516 | 1807 | ||
1517 | if (!spi->max_speed_hz) | 1808 | if (!spi->max_speed_hz) |
1518 | return -EINVAL; | 1809 | return -EINVAL; |
@@ -1535,48 +1826,13 @@ static int pl022_setup(struct spi_device *spi) | |||
1535 | chip_info = spi->controller_data; | 1826 | chip_info = spi->controller_data; |
1536 | 1827 | ||
1537 | if (chip_info == NULL) { | 1828 | if (chip_info == NULL) { |
1829 | chip_info = &pl022_default_chip_info; | ||
1538 | /* spi_board_info.controller_data not is supplied */ | 1830 | /* spi_board_info.controller_data not is supplied */ |
1539 | dev_dbg(&spi->dev, | 1831 | dev_dbg(&spi->dev, |
1540 | "using default controller_data settings\n"); | 1832 | "using default controller_data settings\n"); |
1541 | 1833 | } else | |
1542 | chip_info = | ||
1543 | kzalloc(sizeof(struct pl022_config_chip), GFP_KERNEL); | ||
1544 | |||
1545 | if (!chip_info) { | ||
1546 | dev_err(&spi->dev, | ||
1547 | "cannot allocate controller data\n"); | ||
1548 | status = -ENOMEM; | ||
1549 | goto err_first_setup; | ||
1550 | } | ||
1551 | |||
1552 | dev_dbg(&spi->dev, "allocated memory for controller data\n"); | ||
1553 | |||
1554 | /* Pointer back to the SPI device */ | ||
1555 | chip_info->dev = &spi->dev; | ||
1556 | /* | ||
1557 | * Set controller data default values: | ||
1558 | * Polling is supported by default | ||
1559 | */ | ||
1560 | chip_info->lbm = LOOPBACK_DISABLED; | ||
1561 | chip_info->com_mode = POLLING_TRANSFER; | ||
1562 | chip_info->iface = SSP_INTERFACE_MOTOROLA_SPI; | ||
1563 | chip_info->hierarchy = SSP_SLAVE; | ||
1564 | chip_info->slave_tx_disable = DO_NOT_DRIVE_TX; | ||
1565 | chip_info->endian_tx = SSP_TX_LSB; | ||
1566 | chip_info->endian_rx = SSP_RX_LSB; | ||
1567 | chip_info->data_size = SSP_DATA_BITS_12; | ||
1568 | chip_info->rx_lev_trig = SSP_RX_1_OR_MORE_ELEM; | ||
1569 | chip_info->tx_lev_trig = SSP_TX_1_OR_MORE_EMPTY_LOC; | ||
1570 | chip_info->clk_phase = SSP_CLK_SECOND_EDGE; | ||
1571 | chip_info->clk_pol = SSP_CLK_POL_IDLE_LOW; | ||
1572 | chip_info->ctrl_len = SSP_BITS_8; | ||
1573 | chip_info->wait_state = SSP_MWIRE_WAIT_ZERO; | ||
1574 | chip_info->duplex = SSP_MICROWIRE_CHANNEL_FULL_DUPLEX; | ||
1575 | chip_info->cs_control = null_cs_control; | ||
1576 | } else { | ||
1577 | dev_dbg(&spi->dev, | 1834 | dev_dbg(&spi->dev, |
1578 | "using user supplied controller_data settings\n"); | 1835 | "using user supplied controller_data settings\n"); |
1579 | } | ||
1580 | 1836 | ||
1581 | /* | 1837 | /* |
1582 | * We can override with custom divisors, else we use the board | 1838 | * We can override with custom divisors, else we use the board |
@@ -1586,29 +1842,48 @@ static int pl022_setup(struct spi_device *spi) | |||
1586 | && (0 == chip_info->clk_freq.scr)) { | 1842 | && (0 == chip_info->clk_freq.scr)) { |
1587 | status = calculate_effective_freq(pl022, | 1843 | status = calculate_effective_freq(pl022, |
1588 | spi->max_speed_hz, | 1844 | spi->max_speed_hz, |
1589 | &chip_info->clk_freq); | 1845 | &clk_freq); |
1590 | if (status < 0) | 1846 | if (status < 0) |
1591 | goto err_config_params; | 1847 | goto err_config_params; |
1592 | } else { | 1848 | } else { |
1593 | if ((chip_info->clk_freq.cpsdvsr % 2) != 0) | 1849 | memcpy(&clk_freq, &chip_info->clk_freq, sizeof(clk_freq)); |
1594 | chip_info->clk_freq.cpsdvsr = | 1850 | if ((clk_freq.cpsdvsr % 2) != 0) |
1595 | chip_info->clk_freq.cpsdvsr - 1; | 1851 | clk_freq.cpsdvsr = |
1852 | clk_freq.cpsdvsr - 1; | ||
1853 | } | ||
1854 | if ((clk_freq.cpsdvsr < CPSDVR_MIN) | ||
1855 | || (clk_freq.cpsdvsr > CPSDVR_MAX)) { | ||
1856 | dev_err(&spi->dev, | ||
1857 | "cpsdvsr is configured incorrectly\n"); | ||
1858 | goto err_config_params; | ||
1596 | } | 1859 | } |
1860 | |||
1861 | |||
1597 | status = verify_controller_parameters(pl022, chip_info); | 1862 | status = verify_controller_parameters(pl022, chip_info); |
1598 | if (status) { | 1863 | if (status) { |
1599 | dev_err(&spi->dev, "controller data is incorrect"); | 1864 | dev_err(&spi->dev, "controller data is incorrect"); |
1600 | goto err_config_params; | 1865 | goto err_config_params; |
1601 | } | 1866 | } |
1867 | |||
1602 | /* Now set controller state based on controller data */ | 1868 | /* Now set controller state based on controller data */ |
1603 | chip->xfer_type = chip_info->com_mode; | 1869 | chip->xfer_type = chip_info->com_mode; |
1604 | chip->cs_control = chip_info->cs_control; | 1870 | if (!chip_info->cs_control) { |
1605 | 1871 | chip->cs_control = null_cs_control; | |
1606 | if (chip_info->data_size <= 8) { | 1872 | dev_warn(&spi->dev, |
1607 | dev_dbg(&spi->dev, "1 <= n <=8 bits per word\n"); | 1873 | "chip select function is NULL for this chip\n"); |
1874 | } else | ||
1875 | chip->cs_control = chip_info->cs_control; | ||
1876 | |||
1877 | if (bits <= 3) { | ||
1878 | /* PL022 doesn't support less than 4-bits */ | ||
1879 | status = -ENOTSUPP; | ||
1880 | goto err_config_params; | ||
1881 | } else if (bits <= 8) { | ||
1882 | dev_dbg(&spi->dev, "4 <= n <=8 bits per word\n"); | ||
1608 | chip->n_bytes = 1; | 1883 | chip->n_bytes = 1; |
1609 | chip->read = READING_U8; | 1884 | chip->read = READING_U8; |
1610 | chip->write = WRITING_U8; | 1885 | chip->write = WRITING_U8; |
1611 | } else if (chip_info->data_size <= 16) { | 1886 | } else if (bits <= 16) { |
1612 | dev_dbg(&spi->dev, "9 <= n <= 16 bits per word\n"); | 1887 | dev_dbg(&spi->dev, "9 <= n <= 16 bits per word\n"); |
1613 | chip->n_bytes = 2; | 1888 | chip->n_bytes = 2; |
1614 | chip->read = READING_U16; | 1889 | chip->read = READING_U16; |
@@ -1625,6 +1900,7 @@ static int pl022_setup(struct spi_device *spi) | |||
1625 | dev_err(&spi->dev, | 1900 | dev_err(&spi->dev, |
1626 | "a standard pl022 can only handle " | 1901 | "a standard pl022 can only handle " |
1627 | "1 <= n <= 16 bit words\n"); | 1902 | "1 <= n <= 16 bit words\n"); |
1903 | status = -ENOTSUPP; | ||
1628 | goto err_config_params; | 1904 | goto err_config_params; |
1629 | } | 1905 | } |
1630 | } | 1906 | } |
@@ -1636,9 +1912,8 @@ static int pl022_setup(struct spi_device *spi) | |||
1636 | chip->cpsr = 0; | 1912 | chip->cpsr = 0; |
1637 | if ((chip_info->com_mode == DMA_TRANSFER) | 1913 | if ((chip_info->com_mode == DMA_TRANSFER) |
1638 | && ((pl022->master_info)->enable_dma)) { | 1914 | && ((pl022->master_info)->enable_dma)) { |
1639 | chip->enable_dma = 1; | 1915 | chip->enable_dma = true; |
1640 | dev_dbg(&spi->dev, "DMA mode set in controller state\n"); | 1916 | dev_dbg(&spi->dev, "DMA mode set in controller state\n"); |
1641 | status = process_dma_info(chip_info, chip); | ||
1642 | if (status < 0) | 1917 | if (status < 0) |
1643 | goto err_config_params; | 1918 | goto err_config_params; |
1644 | SSP_WRITE_BITS(chip->dmacr, SSP_DMA_ENABLED, | 1919 | SSP_WRITE_BITS(chip->dmacr, SSP_DMA_ENABLED, |
@@ -1646,7 +1921,7 @@ static int pl022_setup(struct spi_device *spi) | |||
1646 | SSP_WRITE_BITS(chip->dmacr, SSP_DMA_ENABLED, | 1921 | SSP_WRITE_BITS(chip->dmacr, SSP_DMA_ENABLED, |
1647 | SSP_DMACR_MASK_TXDMAE, 1); | 1922 | SSP_DMACR_MASK_TXDMAE, 1); |
1648 | } else { | 1923 | } else { |
1649 | chip->enable_dma = 0; | 1924 | chip->enable_dma = false; |
1650 | dev_dbg(&spi->dev, "DMA mode NOT set in controller state\n"); | 1925 | dev_dbg(&spi->dev, "DMA mode NOT set in controller state\n"); |
1651 | SSP_WRITE_BITS(chip->dmacr, SSP_DMA_DISABLED, | 1926 | SSP_WRITE_BITS(chip->dmacr, SSP_DMA_DISABLED, |
1652 | SSP_DMACR_MASK_RXDMAE, 0); | 1927 | SSP_DMACR_MASK_RXDMAE, 0); |
@@ -1654,10 +1929,12 @@ static int pl022_setup(struct spi_device *spi) | |||
1654 | SSP_DMACR_MASK_TXDMAE, 1); | 1929 | SSP_DMACR_MASK_TXDMAE, 1); |
1655 | } | 1930 | } |
1656 | 1931 | ||
1657 | chip->cpsr = chip_info->clk_freq.cpsdvsr; | 1932 | chip->cpsr = clk_freq.cpsdvsr; |
1658 | 1933 | ||
1659 | /* Special setup for the ST micro extended control registers */ | 1934 | /* Special setup for the ST micro extended control registers */ |
1660 | if (pl022->vendor->extended_cr) { | 1935 | if (pl022->vendor->extended_cr) { |
1936 | u32 etx; | ||
1937 | |||
1661 | if (pl022->vendor->pl023) { | 1938 | if (pl022->vendor->pl023) { |
1662 | /* These bits are only in the PL023 */ | 1939 | /* These bits are only in the PL023 */ |
1663 | SSP_WRITE_BITS(chip->cr1, chip_info->clkdelay, | 1940 | SSP_WRITE_BITS(chip->cr1, chip_info->clkdelay, |
@@ -1673,29 +1950,51 @@ static int pl022_setup(struct spi_device *spi) | |||
1673 | SSP_WRITE_BITS(chip->cr1, chip_info->wait_state, | 1950 | SSP_WRITE_BITS(chip->cr1, chip_info->wait_state, |
1674 | SSP_CR1_MASK_MWAIT_ST, 6); | 1951 | SSP_CR1_MASK_MWAIT_ST, 6); |
1675 | } | 1952 | } |
1676 | SSP_WRITE_BITS(chip->cr0, chip_info->data_size, | 1953 | SSP_WRITE_BITS(chip->cr0, bits - 1, |
1677 | SSP_CR0_MASK_DSS_ST, 0); | 1954 | SSP_CR0_MASK_DSS_ST, 0); |
1678 | SSP_WRITE_BITS(chip->cr1, chip_info->endian_rx, | 1955 | |
1679 | SSP_CR1_MASK_RENDN_ST, 4); | 1956 | if (spi->mode & SPI_LSB_FIRST) { |
1680 | SSP_WRITE_BITS(chip->cr1, chip_info->endian_tx, | 1957 | tmp = SSP_RX_LSB; |
1681 | SSP_CR1_MASK_TENDN_ST, 5); | 1958 | etx = SSP_TX_LSB; |
1959 | } else { | ||
1960 | tmp = SSP_RX_MSB; | ||
1961 | etx = SSP_TX_MSB; | ||
1962 | } | ||
1963 | SSP_WRITE_BITS(chip->cr1, tmp, SSP_CR1_MASK_RENDN_ST, 4); | ||
1964 | SSP_WRITE_BITS(chip->cr1, etx, SSP_CR1_MASK_TENDN_ST, 5); | ||
1682 | SSP_WRITE_BITS(chip->cr1, chip_info->rx_lev_trig, | 1965 | SSP_WRITE_BITS(chip->cr1, chip_info->rx_lev_trig, |
1683 | SSP_CR1_MASK_RXIFLSEL_ST, 7); | 1966 | SSP_CR1_MASK_RXIFLSEL_ST, 7); |
1684 | SSP_WRITE_BITS(chip->cr1, chip_info->tx_lev_trig, | 1967 | SSP_WRITE_BITS(chip->cr1, chip_info->tx_lev_trig, |
1685 | SSP_CR1_MASK_TXIFLSEL_ST, 10); | 1968 | SSP_CR1_MASK_TXIFLSEL_ST, 10); |
1686 | } else { | 1969 | } else { |
1687 | SSP_WRITE_BITS(chip->cr0, chip_info->data_size, | 1970 | SSP_WRITE_BITS(chip->cr0, bits - 1, |
1688 | SSP_CR0_MASK_DSS, 0); | 1971 | SSP_CR0_MASK_DSS, 0); |
1689 | SSP_WRITE_BITS(chip->cr0, chip_info->iface, | 1972 | SSP_WRITE_BITS(chip->cr0, chip_info->iface, |
1690 | SSP_CR0_MASK_FRF, 4); | 1973 | SSP_CR0_MASK_FRF, 4); |
1691 | } | 1974 | } |
1975 | |||
1692 | /* Stuff that is common for all versions */ | 1976 | /* Stuff that is common for all versions */ |
1693 | SSP_WRITE_BITS(chip->cr0, chip_info->clk_pol, SSP_CR0_MASK_SPO, 6); | 1977 | if (spi->mode & SPI_CPOL) |
1694 | SSP_WRITE_BITS(chip->cr0, chip_info->clk_phase, SSP_CR0_MASK_SPH, 7); | 1978 | tmp = SSP_CLK_POL_IDLE_HIGH; |
1695 | SSP_WRITE_BITS(chip->cr0, chip_info->clk_freq.scr, SSP_CR0_MASK_SCR, 8); | 1979 | else |
1980 | tmp = SSP_CLK_POL_IDLE_LOW; | ||
1981 | SSP_WRITE_BITS(chip->cr0, tmp, SSP_CR0_MASK_SPO, 6); | ||
1982 | |||
1983 | if (spi->mode & SPI_CPHA) | ||
1984 | tmp = SSP_CLK_SECOND_EDGE; | ||
1985 | else | ||
1986 | tmp = SSP_CLK_FIRST_EDGE; | ||
1987 | SSP_WRITE_BITS(chip->cr0, tmp, SSP_CR0_MASK_SPH, 7); | ||
1988 | |||
1989 | SSP_WRITE_BITS(chip->cr0, clk_freq.scr, SSP_CR0_MASK_SCR, 8); | ||
1696 | /* Loopback is available on all versions except PL023 */ | 1990 | /* Loopback is available on all versions except PL023 */ |
1697 | if (!pl022->vendor->pl023) | 1991 | if (!pl022->vendor->pl023) { |
1698 | SSP_WRITE_BITS(chip->cr1, chip_info->lbm, SSP_CR1_MASK_LBM, 0); | 1992 | if (spi->mode & SPI_LOOP) |
1993 | tmp = LOOPBACK_ENABLED; | ||
1994 | else | ||
1995 | tmp = LOOPBACK_DISABLED; | ||
1996 | SSP_WRITE_BITS(chip->cr1, tmp, SSP_CR1_MASK_LBM, 0); | ||
1997 | } | ||
1699 | SSP_WRITE_BITS(chip->cr1, SSP_DISABLED, SSP_CR1_MASK_SSE, 1); | 1998 | SSP_WRITE_BITS(chip->cr1, SSP_DISABLED, SSP_CR1_MASK_SSE, 1); |
1700 | SSP_WRITE_BITS(chip->cr1, chip_info->hierarchy, SSP_CR1_MASK_MS, 2); | 1999 | SSP_WRITE_BITS(chip->cr1, chip_info->hierarchy, SSP_CR1_MASK_MS, 2); |
1701 | SSP_WRITE_BITS(chip->cr1, chip_info->slave_tx_disable, SSP_CR1_MASK_SOD, 3); | 2000 | SSP_WRITE_BITS(chip->cr1, chip_info->slave_tx_disable, SSP_CR1_MASK_SOD, 3); |
@@ -1704,7 +2003,7 @@ static int pl022_setup(struct spi_device *spi) | |||
1704 | spi_set_ctldata(spi, chip); | 2003 | spi_set_ctldata(spi, chip); |
1705 | return status; | 2004 | return status; |
1706 | err_config_params: | 2005 | err_config_params: |
1707 | err_first_setup: | 2006 | spi_set_ctldata(spi, NULL); |
1708 | kfree(chip); | 2007 | kfree(chip); |
1709 | return status; | 2008 | return status; |
1710 | } | 2009 | } |
@@ -1766,12 +2065,21 @@ pl022_probe(struct amba_device *adev, struct amba_id *id) | |||
1766 | master->setup = pl022_setup; | 2065 | master->setup = pl022_setup; |
1767 | master->transfer = pl022_transfer; | 2066 | master->transfer = pl022_transfer; |
1768 | 2067 | ||
2068 | /* | ||
2069 | * Supports mode 0-3, loopback, and active low CS. Transfers are | ||
2070 | * always MS bit first on the original pl022. | ||
2071 | */ | ||
2072 | master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_LOOP; | ||
2073 | if (pl022->vendor->extended_cr) | ||
2074 | master->mode_bits |= SPI_LSB_FIRST; | ||
2075 | |||
1769 | dev_dbg(&adev->dev, "BUSNO: %d\n", master->bus_num); | 2076 | dev_dbg(&adev->dev, "BUSNO: %d\n", master->bus_num); |
1770 | 2077 | ||
1771 | status = amba_request_regions(adev, NULL); | 2078 | status = amba_request_regions(adev, NULL); |
1772 | if (status) | 2079 | if (status) |
1773 | goto err_no_ioregion; | 2080 | goto err_no_ioregion; |
1774 | 2081 | ||
2082 | pl022->phybase = adev->res.start; | ||
1775 | pl022->virtbase = ioremap(adev->res.start, resource_size(&adev->res)); | 2083 | pl022->virtbase = ioremap(adev->res.start, resource_size(&adev->res)); |
1776 | if (pl022->virtbase == NULL) { | 2084 | if (pl022->virtbase == NULL) { |
1777 | status = -ENOMEM; | 2085 | status = -ENOMEM; |
@@ -1798,6 +2106,14 @@ pl022_probe(struct amba_device *adev, struct amba_id *id) | |||
1798 | dev_err(&adev->dev, "probe - cannot get IRQ (%d)\n", status); | 2106 | dev_err(&adev->dev, "probe - cannot get IRQ (%d)\n", status); |
1799 | goto err_no_irq; | 2107 | goto err_no_irq; |
1800 | } | 2108 | } |
2109 | |||
2110 | /* Get DMA channels */ | ||
2111 | if (platform_info->enable_dma) { | ||
2112 | status = pl022_dma_probe(pl022); | ||
2113 | if (status != 0) | ||
2114 | goto err_no_dma; | ||
2115 | } | ||
2116 | |||
1801 | /* Initialize and start queue */ | 2117 | /* Initialize and start queue */ |
1802 | status = init_queue(pl022); | 2118 | status = init_queue(pl022); |
1803 | if (status != 0) { | 2119 | if (status != 0) { |
@@ -1826,6 +2142,8 @@ pl022_probe(struct amba_device *adev, struct amba_id *id) | |||
1826 | err_start_queue: | 2142 | err_start_queue: |
1827 | err_init_queue: | 2143 | err_init_queue: |
1828 | destroy_queue(pl022); | 2144 | destroy_queue(pl022); |
2145 | pl022_dma_remove(pl022); | ||
2146 | err_no_dma: | ||
1829 | free_irq(adev->irq[0], pl022); | 2147 | free_irq(adev->irq[0], pl022); |
1830 | err_no_irq: | 2148 | err_no_irq: |
1831 | clk_put(pl022->clk); | 2149 | clk_put(pl022->clk); |
@@ -1856,6 +2174,7 @@ pl022_remove(struct amba_device *adev) | |||
1856 | return status; | 2174 | return status; |
1857 | } | 2175 | } |
1858 | load_ssp_default_config(pl022); | 2176 | load_ssp_default_config(pl022); |
2177 | pl022_dma_remove(pl022); | ||
1859 | free_irq(adev->irq[0], pl022); | 2178 | free_irq(adev->irq[0], pl022); |
1860 | clk_disable(pl022->clk); | 2179 | clk_disable(pl022->clk); |
1861 | clk_put(pl022->clk); | 2180 | clk_put(pl022->clk); |
diff --git a/drivers/spi/atmel_spi.c b/drivers/spi/atmel_spi.c index c4e04428992d..154529aacc03 100644 --- a/drivers/spi/atmel_spi.c +++ b/drivers/spi/atmel_spi.c | |||
@@ -654,6 +654,8 @@ static int atmel_spi_transfer(struct spi_device *spi, struct spi_message *msg) | |||
654 | struct spi_transfer *xfer; | 654 | struct spi_transfer *xfer; |
655 | unsigned long flags; | 655 | unsigned long flags; |
656 | struct device *controller = spi->master->dev.parent; | 656 | struct device *controller = spi->master->dev.parent; |
657 | u8 bits; | ||
658 | struct atmel_spi_device *asd; | ||
657 | 659 | ||
658 | as = spi_master_get_devdata(spi->master); | 660 | as = spi_master_get_devdata(spi->master); |
659 | 661 | ||
@@ -672,8 +674,18 @@ static int atmel_spi_transfer(struct spi_device *spi, struct spi_message *msg) | |||
672 | return -EINVAL; | 674 | return -EINVAL; |
673 | } | 675 | } |
674 | 676 | ||
677 | if (xfer->bits_per_word) { | ||
678 | asd = spi->controller_state; | ||
679 | bits = (asd->csr >> 4) & 0xf; | ||
680 | if (bits != xfer->bits_per_word - 8) { | ||
681 | dev_dbg(&spi->dev, "you can't yet change " | ||
682 | "bits_per_word in transfers\n"); | ||
683 | return -ENOPROTOOPT; | ||
684 | } | ||
685 | } | ||
686 | |||
675 | /* FIXME implement these protocol options!! */ | 687 | /* FIXME implement these protocol options!! */ |
676 | if (xfer->bits_per_word || xfer->speed_hz) { | 688 | if (xfer->speed_hz) { |
677 | dev_dbg(&spi->dev, "no protocol options yet\n"); | 689 | dev_dbg(&spi->dev, "no protocol options yet\n"); |
678 | return -ENOPROTOOPT; | 690 | return -ENOPROTOOPT; |
679 | } | 691 | } |
diff --git a/drivers/spi/omap2_mcspi.c b/drivers/spi/omap2_mcspi.c index b3a94ca0a75a..2a651e61bfbf 100644 --- a/drivers/spi/omap2_mcspi.c +++ b/drivers/spi/omap2_mcspi.c | |||
@@ -296,6 +296,19 @@ static int omap2_mcspi_enable_clocks(struct omap2_mcspi *mcspi) | |||
296 | return 0; | 296 | return 0; |
297 | } | 297 | } |
298 | 298 | ||
299 | static int mcspi_wait_for_reg_bit(void __iomem *reg, unsigned long bit) | ||
300 | { | ||
301 | unsigned long timeout; | ||
302 | |||
303 | timeout = jiffies + msecs_to_jiffies(1000); | ||
304 | while (!(__raw_readl(reg) & bit)) { | ||
305 | if (time_after(jiffies, timeout)) | ||
306 | return -1; | ||
307 | cpu_relax(); | ||
308 | } | ||
309 | return 0; | ||
310 | } | ||
311 | |||
299 | static unsigned | 312 | static unsigned |
300 | omap2_mcspi_txrx_dma(struct spi_device *spi, struct spi_transfer *xfer) | 313 | omap2_mcspi_txrx_dma(struct spi_device *spi, struct spi_transfer *xfer) |
301 | { | 314 | { |
@@ -309,11 +322,14 @@ omap2_mcspi_txrx_dma(struct spi_device *spi, struct spi_transfer *xfer) | |||
309 | u32 l; | 322 | u32 l; |
310 | u8 * rx; | 323 | u8 * rx; |
311 | const u8 * tx; | 324 | const u8 * tx; |
325 | void __iomem *chstat_reg; | ||
312 | 326 | ||
313 | mcspi = spi_master_get_devdata(spi->master); | 327 | mcspi = spi_master_get_devdata(spi->master); |
314 | mcspi_dma = &mcspi->dma_channels[spi->chip_select]; | 328 | mcspi_dma = &mcspi->dma_channels[spi->chip_select]; |
315 | l = mcspi_cached_chconf0(spi); | 329 | l = mcspi_cached_chconf0(spi); |
316 | 330 | ||
331 | chstat_reg = cs->base + OMAP2_MCSPI_CHSTAT0; | ||
332 | |||
317 | count = xfer->len; | 333 | count = xfer->len; |
318 | c = count; | 334 | c = count; |
319 | word_len = cs->word_len; | 335 | word_len = cs->word_len; |
@@ -382,6 +398,16 @@ omap2_mcspi_txrx_dma(struct spi_device *spi, struct spi_transfer *xfer) | |||
382 | if (tx != NULL) { | 398 | if (tx != NULL) { |
383 | wait_for_completion(&mcspi_dma->dma_tx_completion); | 399 | wait_for_completion(&mcspi_dma->dma_tx_completion); |
384 | dma_unmap_single(NULL, xfer->tx_dma, count, DMA_TO_DEVICE); | 400 | dma_unmap_single(NULL, xfer->tx_dma, count, DMA_TO_DEVICE); |
401 | |||
402 | /* for TX_ONLY mode, be sure all words have shifted out */ | ||
403 | if (rx == NULL) { | ||
404 | if (mcspi_wait_for_reg_bit(chstat_reg, | ||
405 | OMAP2_MCSPI_CHSTAT_TXS) < 0) | ||
406 | dev_err(&spi->dev, "TXS timed out\n"); | ||
407 | else if (mcspi_wait_for_reg_bit(chstat_reg, | ||
408 | OMAP2_MCSPI_CHSTAT_EOT) < 0) | ||
409 | dev_err(&spi->dev, "EOT timed out\n"); | ||
410 | } | ||
385 | } | 411 | } |
386 | 412 | ||
387 | if (rx != NULL) { | 413 | if (rx != NULL) { |
@@ -435,19 +461,6 @@ omap2_mcspi_txrx_dma(struct spi_device *spi, struct spi_transfer *xfer) | |||
435 | return count; | 461 | return count; |
436 | } | 462 | } |
437 | 463 | ||
438 | static int mcspi_wait_for_reg_bit(void __iomem *reg, unsigned long bit) | ||
439 | { | ||
440 | unsigned long timeout; | ||
441 | |||
442 | timeout = jiffies + msecs_to_jiffies(1000); | ||
443 | while (!(__raw_readl(reg) & bit)) { | ||
444 | if (time_after(jiffies, timeout)) | ||
445 | return -1; | ||
446 | cpu_relax(); | ||
447 | } | ||
448 | return 0; | ||
449 | } | ||
450 | |||
451 | static unsigned | 464 | static unsigned |
452 | omap2_mcspi_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer) | 465 | omap2_mcspi_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer) |
453 | { | 466 | { |
@@ -489,10 +502,8 @@ omap2_mcspi_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer) | |||
489 | dev_err(&spi->dev, "TXS timed out\n"); | 502 | dev_err(&spi->dev, "TXS timed out\n"); |
490 | goto out; | 503 | goto out; |
491 | } | 504 | } |
492 | #ifdef VERBOSE | 505 | dev_vdbg(&spi->dev, "write-%d %02x\n", |
493 | dev_dbg(&spi->dev, "write-%d %02x\n", | ||
494 | word_len, *tx); | 506 | word_len, *tx); |
495 | #endif | ||
496 | __raw_writel(*tx++, tx_reg); | 507 | __raw_writel(*tx++, tx_reg); |
497 | } | 508 | } |
498 | if (rx != NULL) { | 509 | if (rx != NULL) { |
@@ -506,10 +517,8 @@ omap2_mcspi_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer) | |||
506 | (l & OMAP2_MCSPI_CHCONF_TURBO)) { | 517 | (l & OMAP2_MCSPI_CHCONF_TURBO)) { |
507 | omap2_mcspi_set_enable(spi, 0); | 518 | omap2_mcspi_set_enable(spi, 0); |
508 | *rx++ = __raw_readl(rx_reg); | 519 | *rx++ = __raw_readl(rx_reg); |
509 | #ifdef VERBOSE | 520 | dev_vdbg(&spi->dev, "read-%d %02x\n", |
510 | dev_dbg(&spi->dev, "read-%d %02x\n", | ||
511 | word_len, *(rx - 1)); | 521 | word_len, *(rx - 1)); |
512 | #endif | ||
513 | if (mcspi_wait_for_reg_bit(chstat_reg, | 522 | if (mcspi_wait_for_reg_bit(chstat_reg, |
514 | OMAP2_MCSPI_CHSTAT_RXS) < 0) { | 523 | OMAP2_MCSPI_CHSTAT_RXS) < 0) { |
515 | dev_err(&spi->dev, | 524 | dev_err(&spi->dev, |
@@ -522,10 +531,8 @@ omap2_mcspi_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer) | |||
522 | } | 531 | } |
523 | 532 | ||
524 | *rx++ = __raw_readl(rx_reg); | 533 | *rx++ = __raw_readl(rx_reg); |
525 | #ifdef VERBOSE | 534 | dev_vdbg(&spi->dev, "read-%d %02x\n", |
526 | dev_dbg(&spi->dev, "read-%d %02x\n", | ||
527 | word_len, *(rx - 1)); | 535 | word_len, *(rx - 1)); |
528 | #endif | ||
529 | } | 536 | } |
530 | } while (c); | 537 | } while (c); |
531 | } else if (word_len <= 16) { | 538 | } else if (word_len <= 16) { |
@@ -542,10 +549,8 @@ omap2_mcspi_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer) | |||
542 | dev_err(&spi->dev, "TXS timed out\n"); | 549 | dev_err(&spi->dev, "TXS timed out\n"); |
543 | goto out; | 550 | goto out; |
544 | } | 551 | } |
545 | #ifdef VERBOSE | 552 | dev_vdbg(&spi->dev, "write-%d %04x\n", |
546 | dev_dbg(&spi->dev, "write-%d %04x\n", | ||
547 | word_len, *tx); | 553 | word_len, *tx); |
548 | #endif | ||
549 | __raw_writel(*tx++, tx_reg); | 554 | __raw_writel(*tx++, tx_reg); |
550 | } | 555 | } |
551 | if (rx != NULL) { | 556 | if (rx != NULL) { |
@@ -559,10 +564,8 @@ omap2_mcspi_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer) | |||
559 | (l & OMAP2_MCSPI_CHCONF_TURBO)) { | 564 | (l & OMAP2_MCSPI_CHCONF_TURBO)) { |
560 | omap2_mcspi_set_enable(spi, 0); | 565 | omap2_mcspi_set_enable(spi, 0); |
561 | *rx++ = __raw_readl(rx_reg); | 566 | *rx++ = __raw_readl(rx_reg); |
562 | #ifdef VERBOSE | 567 | dev_vdbg(&spi->dev, "read-%d %04x\n", |
563 | dev_dbg(&spi->dev, "read-%d %04x\n", | ||
564 | word_len, *(rx - 1)); | 568 | word_len, *(rx - 1)); |
565 | #endif | ||
566 | if (mcspi_wait_for_reg_bit(chstat_reg, | 569 | if (mcspi_wait_for_reg_bit(chstat_reg, |
567 | OMAP2_MCSPI_CHSTAT_RXS) < 0) { | 570 | OMAP2_MCSPI_CHSTAT_RXS) < 0) { |
568 | dev_err(&spi->dev, | 571 | dev_err(&spi->dev, |
@@ -575,10 +578,8 @@ omap2_mcspi_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer) | |||
575 | } | 578 | } |
576 | 579 | ||
577 | *rx++ = __raw_readl(rx_reg); | 580 | *rx++ = __raw_readl(rx_reg); |
578 | #ifdef VERBOSE | 581 | dev_vdbg(&spi->dev, "read-%d %04x\n", |
579 | dev_dbg(&spi->dev, "read-%d %04x\n", | ||
580 | word_len, *(rx - 1)); | 582 | word_len, *(rx - 1)); |
581 | #endif | ||
582 | } | 583 | } |
583 | } while (c); | 584 | } while (c); |
584 | } else if (word_len <= 32) { | 585 | } else if (word_len <= 32) { |
@@ -595,10 +596,8 @@ omap2_mcspi_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer) | |||
595 | dev_err(&spi->dev, "TXS timed out\n"); | 596 | dev_err(&spi->dev, "TXS timed out\n"); |
596 | goto out; | 597 | goto out; |
597 | } | 598 | } |
598 | #ifdef VERBOSE | 599 | dev_vdbg(&spi->dev, "write-%d %08x\n", |
599 | dev_dbg(&spi->dev, "write-%d %08x\n", | ||
600 | word_len, *tx); | 600 | word_len, *tx); |
601 | #endif | ||
602 | __raw_writel(*tx++, tx_reg); | 601 | __raw_writel(*tx++, tx_reg); |
603 | } | 602 | } |
604 | if (rx != NULL) { | 603 | if (rx != NULL) { |
@@ -612,10 +611,8 @@ omap2_mcspi_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer) | |||
612 | (l & OMAP2_MCSPI_CHCONF_TURBO)) { | 611 | (l & OMAP2_MCSPI_CHCONF_TURBO)) { |
613 | omap2_mcspi_set_enable(spi, 0); | 612 | omap2_mcspi_set_enable(spi, 0); |
614 | *rx++ = __raw_readl(rx_reg); | 613 | *rx++ = __raw_readl(rx_reg); |
615 | #ifdef VERBOSE | 614 | dev_vdbg(&spi->dev, "read-%d %08x\n", |
616 | dev_dbg(&spi->dev, "read-%d %08x\n", | ||
617 | word_len, *(rx - 1)); | 615 | word_len, *(rx - 1)); |
618 | #endif | ||
619 | if (mcspi_wait_for_reg_bit(chstat_reg, | 616 | if (mcspi_wait_for_reg_bit(chstat_reg, |
620 | OMAP2_MCSPI_CHSTAT_RXS) < 0) { | 617 | OMAP2_MCSPI_CHSTAT_RXS) < 0) { |
621 | dev_err(&spi->dev, | 618 | dev_err(&spi->dev, |
@@ -628,10 +625,8 @@ omap2_mcspi_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer) | |||
628 | } | 625 | } |
629 | 626 | ||
630 | *rx++ = __raw_readl(rx_reg); | 627 | *rx++ = __raw_readl(rx_reg); |
631 | #ifdef VERBOSE | 628 | dev_vdbg(&spi->dev, "read-%d %08x\n", |
632 | dev_dbg(&spi->dev, "read-%d %08x\n", | ||
633 | word_len, *(rx - 1)); | 629 | word_len, *(rx - 1)); |
634 | #endif | ||
635 | } | 630 | } |
636 | } while (c); | 631 | } while (c); |
637 | } | 632 | } |
@@ -644,6 +639,12 @@ omap2_mcspi_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer) | |||
644 | } else if (mcspi_wait_for_reg_bit(chstat_reg, | 639 | } else if (mcspi_wait_for_reg_bit(chstat_reg, |
645 | OMAP2_MCSPI_CHSTAT_EOT) < 0) | 640 | OMAP2_MCSPI_CHSTAT_EOT) < 0) |
646 | dev_err(&spi->dev, "EOT timed out\n"); | 641 | dev_err(&spi->dev, "EOT timed out\n"); |
642 | |||
643 | /* disable chan to purge rx datas received in TX_ONLY transfer, | ||
644 | * otherwise these rx datas will affect the direct following | ||
645 | * RX_ONLY transfer. | ||
646 | */ | ||
647 | omap2_mcspi_set_enable(spi, 0); | ||
647 | } | 648 | } |
648 | out: | 649 | out: |
649 | omap2_mcspi_set_enable(spi, 1); | 650 | omap2_mcspi_set_enable(spi, 1); |
diff --git a/drivers/spi/orion_spi.c b/drivers/spi/orion_spi.c index 3aea50da7b29..0b677dc041ad 100644 --- a/drivers/spi/orion_spi.c +++ b/drivers/spi/orion_spi.c | |||
@@ -404,7 +404,7 @@ static int orion_spi_transfer(struct spi_device *spi, struct spi_message *m) | |||
404 | goto msg_rejected; | 404 | goto msg_rejected; |
405 | } | 405 | } |
406 | 406 | ||
407 | if ((t != NULL) && t->bits_per_word) | 407 | if (t->bits_per_word) |
408 | bits_per_word = t->bits_per_word; | 408 | bits_per_word = t->bits_per_word; |
409 | 409 | ||
410 | if ((bits_per_word != 8) && (bits_per_word != 16)) { | 410 | if ((bits_per_word != 8) && (bits_per_word != 16)) { |
@@ -415,7 +415,7 @@ static int orion_spi_transfer(struct spi_device *spi, struct spi_message *m) | |||
415 | goto msg_rejected; | 415 | goto msg_rejected; |
416 | } | 416 | } |
417 | /*make sure buffer length is even when working in 16 bit mode*/ | 417 | /*make sure buffer length is even when working in 16 bit mode*/ |
418 | if ((t != NULL) && (t->bits_per_word == 16) && (t->len & 1)) { | 418 | if ((t->bits_per_word == 16) && (t->len & 1)) { |
419 | dev_err(&spi->dev, | 419 | dev_err(&spi->dev, |
420 | "message rejected : " | 420 | "message rejected : " |
421 | "odd data length (%d) while in 16 bit mode\n", | 421 | "odd data length (%d) while in 16 bit mode\n", |
diff --git a/drivers/spi/spi_bfin5xx.c b/drivers/spi/spi_bfin5xx.c index 10a6dc3d37ac..ab483a0ec6d0 100644 --- a/drivers/spi/spi_bfin5xx.c +++ b/drivers/spi/spi_bfin5xx.c | |||
@@ -1,7 +1,7 @@ | |||
1 | /* | 1 | /* |
2 | * Blackfin On-Chip SPI Driver | 2 | * Blackfin On-Chip SPI Driver |
3 | * | 3 | * |
4 | * Copyright 2004-2007 Analog Devices Inc. | 4 | * Copyright 2004-2010 Analog Devices Inc. |
5 | * | 5 | * |
6 | * Enter bugs at http://blackfin.uclinux.org/ | 6 | * Enter bugs at http://blackfin.uclinux.org/ |
7 | * | 7 | * |
@@ -41,13 +41,16 @@ MODULE_LICENSE("GPL"); | |||
41 | #define RUNNING_STATE ((void *)1) | 41 | #define RUNNING_STATE ((void *)1) |
42 | #define DONE_STATE ((void *)2) | 42 | #define DONE_STATE ((void *)2) |
43 | #define ERROR_STATE ((void *)-1) | 43 | #define ERROR_STATE ((void *)-1) |
44 | #define QUEUE_RUNNING 0 | ||
45 | #define QUEUE_STOPPED 1 | ||
46 | 44 | ||
47 | /* Value to send if no TX value is supplied */ | 45 | struct bfin_spi_master_data; |
48 | #define SPI_IDLE_TXVAL 0x0000 | ||
49 | 46 | ||
50 | struct driver_data { | 47 | struct bfin_spi_transfer_ops { |
48 | void (*write) (struct bfin_spi_master_data *); | ||
49 | void (*read) (struct bfin_spi_master_data *); | ||
50 | void (*duplex) (struct bfin_spi_master_data *); | ||
51 | }; | ||
52 | |||
53 | struct bfin_spi_master_data { | ||
51 | /* Driver model hookup */ | 54 | /* Driver model hookup */ |
52 | struct platform_device *pdev; | 55 | struct platform_device *pdev; |
53 | 56 | ||
@@ -69,7 +72,7 @@ struct driver_data { | |||
69 | spinlock_t lock; | 72 | spinlock_t lock; |
70 | struct list_head queue; | 73 | struct list_head queue; |
71 | int busy; | 74 | int busy; |
72 | int run; | 75 | bool running; |
73 | 76 | ||
74 | /* Message Transfer pump */ | 77 | /* Message Transfer pump */ |
75 | struct tasklet_struct pump_transfers; | 78 | struct tasklet_struct pump_transfers; |
@@ -77,7 +80,7 @@ struct driver_data { | |||
77 | /* Current message transfer state info */ | 80 | /* Current message transfer state info */ |
78 | struct spi_message *cur_msg; | 81 | struct spi_message *cur_msg; |
79 | struct spi_transfer *cur_transfer; | 82 | struct spi_transfer *cur_transfer; |
80 | struct chip_data *cur_chip; | 83 | struct bfin_spi_slave_data *cur_chip; |
81 | size_t len_in_bytes; | 84 | size_t len_in_bytes; |
82 | size_t len; | 85 | size_t len; |
83 | void *tx; | 86 | void *tx; |
@@ -92,38 +95,37 @@ struct driver_data { | |||
92 | dma_addr_t rx_dma; | 95 | dma_addr_t rx_dma; |
93 | dma_addr_t tx_dma; | 96 | dma_addr_t tx_dma; |
94 | 97 | ||
98 | int irq_requested; | ||
99 | int spi_irq; | ||
100 | |||
95 | size_t rx_map_len; | 101 | size_t rx_map_len; |
96 | size_t tx_map_len; | 102 | size_t tx_map_len; |
97 | u8 n_bytes; | 103 | u8 n_bytes; |
104 | u16 ctrl_reg; | ||
105 | u16 flag_reg; | ||
106 | |||
98 | int cs_change; | 107 | int cs_change; |
99 | void (*write) (struct driver_data *); | 108 | const struct bfin_spi_transfer_ops *ops; |
100 | void (*read) (struct driver_data *); | ||
101 | void (*duplex) (struct driver_data *); | ||
102 | }; | 109 | }; |
103 | 110 | ||
104 | struct chip_data { | 111 | struct bfin_spi_slave_data { |
105 | u16 ctl_reg; | 112 | u16 ctl_reg; |
106 | u16 baud; | 113 | u16 baud; |
107 | u16 flag; | 114 | u16 flag; |
108 | 115 | ||
109 | u8 chip_select_num; | 116 | u8 chip_select_num; |
110 | u8 n_bytes; | ||
111 | u8 width; /* 0 or 1 */ | ||
112 | u8 enable_dma; | 117 | u8 enable_dma; |
113 | u8 bits_per_word; /* 8 or 16 */ | ||
114 | u8 cs_change_per_word; | ||
115 | u16 cs_chg_udelay; /* Some devices require > 255usec delay */ | 118 | u16 cs_chg_udelay; /* Some devices require > 255usec delay */ |
116 | u32 cs_gpio; | 119 | u32 cs_gpio; |
117 | u16 idle_tx_val; | 120 | u16 idle_tx_val; |
118 | void (*write) (struct driver_data *); | 121 | u8 pio_interrupt; /* use spi data irq */ |
119 | void (*read) (struct driver_data *); | 122 | const struct bfin_spi_transfer_ops *ops; |
120 | void (*duplex) (struct driver_data *); | ||
121 | }; | 123 | }; |
122 | 124 | ||
123 | #define DEFINE_SPI_REG(reg, off) \ | 125 | #define DEFINE_SPI_REG(reg, off) \ |
124 | static inline u16 read_##reg(struct driver_data *drv_data) \ | 126 | static inline u16 read_##reg(struct bfin_spi_master_data *drv_data) \ |
125 | { return bfin_read16(drv_data->regs_base + off); } \ | 127 | { return bfin_read16(drv_data->regs_base + off); } \ |
126 | static inline void write_##reg(struct driver_data *drv_data, u16 v) \ | 128 | static inline void write_##reg(struct bfin_spi_master_data *drv_data, u16 v) \ |
127 | { bfin_write16(drv_data->regs_base + off, v); } | 129 | { bfin_write16(drv_data->regs_base + off, v); } |
128 | 130 | ||
129 | DEFINE_SPI_REG(CTRL, 0x00) | 131 | DEFINE_SPI_REG(CTRL, 0x00) |
@@ -134,7 +136,7 @@ DEFINE_SPI_REG(RDBR, 0x10) | |||
134 | DEFINE_SPI_REG(BAUD, 0x14) | 136 | DEFINE_SPI_REG(BAUD, 0x14) |
135 | DEFINE_SPI_REG(SHAW, 0x18) | 137 | DEFINE_SPI_REG(SHAW, 0x18) |
136 | 138 | ||
137 | static void bfin_spi_enable(struct driver_data *drv_data) | 139 | static void bfin_spi_enable(struct bfin_spi_master_data *drv_data) |
138 | { | 140 | { |
139 | u16 cr; | 141 | u16 cr; |
140 | 142 | ||
@@ -142,7 +144,7 @@ static void bfin_spi_enable(struct driver_data *drv_data) | |||
142 | write_CTRL(drv_data, (cr | BIT_CTL_ENABLE)); | 144 | write_CTRL(drv_data, (cr | BIT_CTL_ENABLE)); |
143 | } | 145 | } |
144 | 146 | ||
145 | static void bfin_spi_disable(struct driver_data *drv_data) | 147 | static void bfin_spi_disable(struct bfin_spi_master_data *drv_data) |
146 | { | 148 | { |
147 | u16 cr; | 149 | u16 cr; |
148 | 150 | ||
@@ -165,7 +167,7 @@ static u16 hz_to_spi_baud(u32 speed_hz) | |||
165 | return spi_baud; | 167 | return spi_baud; |
166 | } | 168 | } |
167 | 169 | ||
168 | static int bfin_spi_flush(struct driver_data *drv_data) | 170 | static int bfin_spi_flush(struct bfin_spi_master_data *drv_data) |
169 | { | 171 | { |
170 | unsigned long limit = loops_per_jiffy << 1; | 172 | unsigned long limit = loops_per_jiffy << 1; |
171 | 173 | ||
@@ -179,13 +181,12 @@ static int bfin_spi_flush(struct driver_data *drv_data) | |||
179 | } | 181 | } |
180 | 182 | ||
181 | /* Chip select operation functions for cs_change flag */ | 183 | /* Chip select operation functions for cs_change flag */ |
182 | static void bfin_spi_cs_active(struct driver_data *drv_data, struct chip_data *chip) | 184 | static void bfin_spi_cs_active(struct bfin_spi_master_data *drv_data, struct bfin_spi_slave_data *chip) |
183 | { | 185 | { |
184 | if (likely(chip->chip_select_num)) { | 186 | if (likely(chip->chip_select_num < MAX_CTRL_CS)) { |
185 | u16 flag = read_FLAG(drv_data); | 187 | u16 flag = read_FLAG(drv_data); |
186 | 188 | ||
187 | flag |= chip->flag; | 189 | flag &= ~chip->flag; |
188 | flag &= ~(chip->flag << 8); | ||
189 | 190 | ||
190 | write_FLAG(drv_data, flag); | 191 | write_FLAG(drv_data, flag); |
191 | } else { | 192 | } else { |
@@ -193,13 +194,13 @@ static void bfin_spi_cs_active(struct driver_data *drv_data, struct chip_data *c | |||
193 | } | 194 | } |
194 | } | 195 | } |
195 | 196 | ||
196 | static void bfin_spi_cs_deactive(struct driver_data *drv_data, struct chip_data *chip) | 197 | static void bfin_spi_cs_deactive(struct bfin_spi_master_data *drv_data, |
198 | struct bfin_spi_slave_data *chip) | ||
197 | { | 199 | { |
198 | if (likely(chip->chip_select_num)) { | 200 | if (likely(chip->chip_select_num < MAX_CTRL_CS)) { |
199 | u16 flag = read_FLAG(drv_data); | 201 | u16 flag = read_FLAG(drv_data); |
200 | 202 | ||
201 | flag &= ~chip->flag; | 203 | flag |= chip->flag; |
202 | flag |= (chip->flag << 8); | ||
203 | 204 | ||
204 | write_FLAG(drv_data, flag); | 205 | write_FLAG(drv_data, flag); |
205 | } else { | 206 | } else { |
@@ -211,16 +212,43 @@ static void bfin_spi_cs_deactive(struct driver_data *drv_data, struct chip_data | |||
211 | udelay(chip->cs_chg_udelay); | 212 | udelay(chip->cs_chg_udelay); |
212 | } | 213 | } |
213 | 214 | ||
215 | /* enable or disable the pin muxed by GPIO and SPI CS to work as SPI CS */ | ||
216 | static inline void bfin_spi_cs_enable(struct bfin_spi_master_data *drv_data, | ||
217 | struct bfin_spi_slave_data *chip) | ||
218 | { | ||
219 | if (chip->chip_select_num < MAX_CTRL_CS) { | ||
220 | u16 flag = read_FLAG(drv_data); | ||
221 | |||
222 | flag |= (chip->flag >> 8); | ||
223 | |||
224 | write_FLAG(drv_data, flag); | ||
225 | } | ||
226 | } | ||
227 | |||
228 | static inline void bfin_spi_cs_disable(struct bfin_spi_master_data *drv_data, | ||
229 | struct bfin_spi_slave_data *chip) | ||
230 | { | ||
231 | if (chip->chip_select_num < MAX_CTRL_CS) { | ||
232 | u16 flag = read_FLAG(drv_data); | ||
233 | |||
234 | flag &= ~(chip->flag >> 8); | ||
235 | |||
236 | write_FLAG(drv_data, flag); | ||
237 | } | ||
238 | } | ||
239 | |||
214 | /* stop controller and re-config current chip*/ | 240 | /* stop controller and re-config current chip*/ |
215 | static void bfin_spi_restore_state(struct driver_data *drv_data) | 241 | static void bfin_spi_restore_state(struct bfin_spi_master_data *drv_data) |
216 | { | 242 | { |
217 | struct chip_data *chip = drv_data->cur_chip; | 243 | struct bfin_spi_slave_data *chip = drv_data->cur_chip; |
218 | 244 | ||
219 | /* Clear status and disable clock */ | 245 | /* Clear status and disable clock */ |
220 | write_STAT(drv_data, BIT_STAT_CLR); | 246 | write_STAT(drv_data, BIT_STAT_CLR); |
221 | bfin_spi_disable(drv_data); | 247 | bfin_spi_disable(drv_data); |
222 | dev_dbg(&drv_data->pdev->dev, "restoring spi ctl state\n"); | 248 | dev_dbg(&drv_data->pdev->dev, "restoring spi ctl state\n"); |
223 | 249 | ||
250 | SSYNC(); | ||
251 | |||
224 | /* Load the registers */ | 252 | /* Load the registers */ |
225 | write_CTRL(drv_data, chip->ctl_reg); | 253 | write_CTRL(drv_data, chip->ctl_reg); |
226 | write_BAUD(drv_data, chip->baud); | 254 | write_BAUD(drv_data, chip->baud); |
@@ -230,49 +258,12 @@ static void bfin_spi_restore_state(struct driver_data *drv_data) | |||
230 | } | 258 | } |
231 | 259 | ||
232 | /* used to kick off transfer in rx mode and read unwanted RX data */ | 260 | /* used to kick off transfer in rx mode and read unwanted RX data */ |
233 | static inline void bfin_spi_dummy_read(struct driver_data *drv_data) | 261 | static inline void bfin_spi_dummy_read(struct bfin_spi_master_data *drv_data) |
234 | { | 262 | { |
235 | (void) read_RDBR(drv_data); | 263 | (void) read_RDBR(drv_data); |
236 | } | 264 | } |
237 | 265 | ||
238 | static void bfin_spi_null_writer(struct driver_data *drv_data) | 266 | static void bfin_spi_u8_writer(struct bfin_spi_master_data *drv_data) |
239 | { | ||
240 | u8 n_bytes = drv_data->n_bytes; | ||
241 | u16 tx_val = drv_data->cur_chip->idle_tx_val; | ||
242 | |||
243 | /* clear RXS (we check for RXS inside the loop) */ | ||
244 | bfin_spi_dummy_read(drv_data); | ||
245 | |||
246 | while (drv_data->tx < drv_data->tx_end) { | ||
247 | write_TDBR(drv_data, tx_val); | ||
248 | drv_data->tx += n_bytes; | ||
249 | /* wait until transfer finished. | ||
250 | checking SPIF or TXS may not guarantee transfer completion */ | ||
251 | while (!(read_STAT(drv_data) & BIT_STAT_RXS)) | ||
252 | cpu_relax(); | ||
253 | /* discard RX data and clear RXS */ | ||
254 | bfin_spi_dummy_read(drv_data); | ||
255 | } | ||
256 | } | ||
257 | |||
258 | static void bfin_spi_null_reader(struct driver_data *drv_data) | ||
259 | { | ||
260 | u8 n_bytes = drv_data->n_bytes; | ||
261 | u16 tx_val = drv_data->cur_chip->idle_tx_val; | ||
262 | |||
263 | /* discard old RX data and clear RXS */ | ||
264 | bfin_spi_dummy_read(drv_data); | ||
265 | |||
266 | while (drv_data->rx < drv_data->rx_end) { | ||
267 | write_TDBR(drv_data, tx_val); | ||
268 | drv_data->rx += n_bytes; | ||
269 | while (!(read_STAT(drv_data) & BIT_STAT_RXS)) | ||
270 | cpu_relax(); | ||
271 | bfin_spi_dummy_read(drv_data); | ||
272 | } | ||
273 | } | ||
274 | |||
275 | static void bfin_spi_u8_writer(struct driver_data *drv_data) | ||
276 | { | 267 | { |
277 | /* clear RXS (we check for RXS inside the loop) */ | 268 | /* clear RXS (we check for RXS inside the loop) */ |
278 | bfin_spi_dummy_read(drv_data); | 269 | bfin_spi_dummy_read(drv_data); |
@@ -288,25 +279,7 @@ static void bfin_spi_u8_writer(struct driver_data *drv_data) | |||
288 | } | 279 | } |
289 | } | 280 | } |
290 | 281 | ||
291 | static void bfin_spi_u8_cs_chg_writer(struct driver_data *drv_data) | 282 | static void bfin_spi_u8_reader(struct bfin_spi_master_data *drv_data) |
292 | { | ||
293 | struct chip_data *chip = drv_data->cur_chip; | ||
294 | |||
295 | /* clear RXS (we check for RXS inside the loop) */ | ||
296 | bfin_spi_dummy_read(drv_data); | ||
297 | |||
298 | while (drv_data->tx < drv_data->tx_end) { | ||
299 | bfin_spi_cs_active(drv_data, chip); | ||
300 | write_TDBR(drv_data, (*(u8 *) (drv_data->tx++))); | ||
301 | /* make sure transfer finished before deactiving CS */ | ||
302 | while (!(read_STAT(drv_data) & BIT_STAT_RXS)) | ||
303 | cpu_relax(); | ||
304 | bfin_spi_dummy_read(drv_data); | ||
305 | bfin_spi_cs_deactive(drv_data, chip); | ||
306 | } | ||
307 | } | ||
308 | |||
309 | static void bfin_spi_u8_reader(struct driver_data *drv_data) | ||
310 | { | 283 | { |
311 | u16 tx_val = drv_data->cur_chip->idle_tx_val; | 284 | u16 tx_val = drv_data->cur_chip->idle_tx_val; |
312 | 285 | ||
@@ -321,25 +294,7 @@ static void bfin_spi_u8_reader(struct driver_data *drv_data) | |||
321 | } | 294 | } |
322 | } | 295 | } |
323 | 296 | ||
324 | static void bfin_spi_u8_cs_chg_reader(struct driver_data *drv_data) | 297 | static void bfin_spi_u8_duplex(struct bfin_spi_master_data *drv_data) |
325 | { | ||
326 | struct chip_data *chip = drv_data->cur_chip; | ||
327 | u16 tx_val = chip->idle_tx_val; | ||
328 | |||
329 | /* discard old RX data and clear RXS */ | ||
330 | bfin_spi_dummy_read(drv_data); | ||
331 | |||
332 | while (drv_data->rx < drv_data->rx_end) { | ||
333 | bfin_spi_cs_active(drv_data, chip); | ||
334 | write_TDBR(drv_data, tx_val); | ||
335 | while (!(read_STAT(drv_data) & BIT_STAT_RXS)) | ||
336 | cpu_relax(); | ||
337 | *(u8 *) (drv_data->rx++) = read_RDBR(drv_data); | ||
338 | bfin_spi_cs_deactive(drv_data, chip); | ||
339 | } | ||
340 | } | ||
341 | |||
342 | static void bfin_spi_u8_duplex(struct driver_data *drv_data) | ||
343 | { | 298 | { |
344 | /* discard old RX data and clear RXS */ | 299 | /* discard old RX data and clear RXS */ |
345 | bfin_spi_dummy_read(drv_data); | 300 | bfin_spi_dummy_read(drv_data); |
@@ -352,24 +307,13 @@ static void bfin_spi_u8_duplex(struct driver_data *drv_data) | |||
352 | } | 307 | } |
353 | } | 308 | } |
354 | 309 | ||
355 | static void bfin_spi_u8_cs_chg_duplex(struct driver_data *drv_data) | 310 | static const struct bfin_spi_transfer_ops bfin_bfin_spi_transfer_ops_u8 = { |
356 | { | 311 | .write = bfin_spi_u8_writer, |
357 | struct chip_data *chip = drv_data->cur_chip; | 312 | .read = bfin_spi_u8_reader, |
358 | 313 | .duplex = bfin_spi_u8_duplex, | |
359 | /* discard old RX data and clear RXS */ | 314 | }; |
360 | bfin_spi_dummy_read(drv_data); | ||
361 | |||
362 | while (drv_data->rx < drv_data->rx_end) { | ||
363 | bfin_spi_cs_active(drv_data, chip); | ||
364 | write_TDBR(drv_data, (*(u8 *) (drv_data->tx++))); | ||
365 | while (!(read_STAT(drv_data) & BIT_STAT_RXS)) | ||
366 | cpu_relax(); | ||
367 | *(u8 *) (drv_data->rx++) = read_RDBR(drv_data); | ||
368 | bfin_spi_cs_deactive(drv_data, chip); | ||
369 | } | ||
370 | } | ||
371 | 315 | ||
372 | static void bfin_spi_u16_writer(struct driver_data *drv_data) | 316 | static void bfin_spi_u16_writer(struct bfin_spi_master_data *drv_data) |
373 | { | 317 | { |
374 | /* clear RXS (we check for RXS inside the loop) */ | 318 | /* clear RXS (we check for RXS inside the loop) */ |
375 | bfin_spi_dummy_read(drv_data); | 319 | bfin_spi_dummy_read(drv_data); |
@@ -386,26 +330,7 @@ static void bfin_spi_u16_writer(struct driver_data *drv_data) | |||
386 | } | 330 | } |
387 | } | 331 | } |
388 | 332 | ||
389 | static void bfin_spi_u16_cs_chg_writer(struct driver_data *drv_data) | 333 | static void bfin_spi_u16_reader(struct bfin_spi_master_data *drv_data) |
390 | { | ||
391 | struct chip_data *chip = drv_data->cur_chip; | ||
392 | |||
393 | /* clear RXS (we check for RXS inside the loop) */ | ||
394 | bfin_spi_dummy_read(drv_data); | ||
395 | |||
396 | while (drv_data->tx < drv_data->tx_end) { | ||
397 | bfin_spi_cs_active(drv_data, chip); | ||
398 | write_TDBR(drv_data, (*(u16 *) (drv_data->tx))); | ||
399 | drv_data->tx += 2; | ||
400 | /* make sure transfer finished before deactiving CS */ | ||
401 | while (!(read_STAT(drv_data) & BIT_STAT_RXS)) | ||
402 | cpu_relax(); | ||
403 | bfin_spi_dummy_read(drv_data); | ||
404 | bfin_spi_cs_deactive(drv_data, chip); | ||
405 | } | ||
406 | } | ||
407 | |||
408 | static void bfin_spi_u16_reader(struct driver_data *drv_data) | ||
409 | { | 334 | { |
410 | u16 tx_val = drv_data->cur_chip->idle_tx_val; | 335 | u16 tx_val = drv_data->cur_chip->idle_tx_val; |
411 | 336 | ||
@@ -421,26 +346,7 @@ static void bfin_spi_u16_reader(struct driver_data *drv_data) | |||
421 | } | 346 | } |
422 | } | 347 | } |
423 | 348 | ||
424 | static void bfin_spi_u16_cs_chg_reader(struct driver_data *drv_data) | 349 | static void bfin_spi_u16_duplex(struct bfin_spi_master_data *drv_data) |
425 | { | ||
426 | struct chip_data *chip = drv_data->cur_chip; | ||
427 | u16 tx_val = chip->idle_tx_val; | ||
428 | |||
429 | /* discard old RX data and clear RXS */ | ||
430 | bfin_spi_dummy_read(drv_data); | ||
431 | |||
432 | while (drv_data->rx < drv_data->rx_end) { | ||
433 | bfin_spi_cs_active(drv_data, chip); | ||
434 | write_TDBR(drv_data, tx_val); | ||
435 | while (!(read_STAT(drv_data) & BIT_STAT_RXS)) | ||
436 | cpu_relax(); | ||
437 | *(u16 *) (drv_data->rx) = read_RDBR(drv_data); | ||
438 | drv_data->rx += 2; | ||
439 | bfin_spi_cs_deactive(drv_data, chip); | ||
440 | } | ||
441 | } | ||
442 | |||
443 | static void bfin_spi_u16_duplex(struct driver_data *drv_data) | ||
444 | { | 350 | { |
445 | /* discard old RX data and clear RXS */ | 351 | /* discard old RX data and clear RXS */ |
446 | bfin_spi_dummy_read(drv_data); | 352 | bfin_spi_dummy_read(drv_data); |
@@ -455,27 +361,14 @@ static void bfin_spi_u16_duplex(struct driver_data *drv_data) | |||
455 | } | 361 | } |
456 | } | 362 | } |
457 | 363 | ||
458 | static void bfin_spi_u16_cs_chg_duplex(struct driver_data *drv_data) | 364 | static const struct bfin_spi_transfer_ops bfin_bfin_spi_transfer_ops_u16 = { |
459 | { | 365 | .write = bfin_spi_u16_writer, |
460 | struct chip_data *chip = drv_data->cur_chip; | 366 | .read = bfin_spi_u16_reader, |
461 | 367 | .duplex = bfin_spi_u16_duplex, | |
462 | /* discard old RX data and clear RXS */ | 368 | }; |
463 | bfin_spi_dummy_read(drv_data); | ||
464 | |||
465 | while (drv_data->rx < drv_data->rx_end) { | ||
466 | bfin_spi_cs_active(drv_data, chip); | ||
467 | write_TDBR(drv_data, (*(u16 *) (drv_data->tx))); | ||
468 | drv_data->tx += 2; | ||
469 | while (!(read_STAT(drv_data) & BIT_STAT_RXS)) | ||
470 | cpu_relax(); | ||
471 | *(u16 *) (drv_data->rx) = read_RDBR(drv_data); | ||
472 | drv_data->rx += 2; | ||
473 | bfin_spi_cs_deactive(drv_data, chip); | ||
474 | } | ||
475 | } | ||
476 | 369 | ||
477 | /* test if ther is more transfer to be done */ | 370 | /* test if there is more transfer to be done */ |
478 | static void *bfin_spi_next_transfer(struct driver_data *drv_data) | 371 | static void *bfin_spi_next_transfer(struct bfin_spi_master_data *drv_data) |
479 | { | 372 | { |
480 | struct spi_message *msg = drv_data->cur_msg; | 373 | struct spi_message *msg = drv_data->cur_msg; |
481 | struct spi_transfer *trans = drv_data->cur_transfer; | 374 | struct spi_transfer *trans = drv_data->cur_transfer; |
@@ -494,9 +387,9 @@ static void *bfin_spi_next_transfer(struct driver_data *drv_data) | |||
494 | * caller already set message->status; | 387 | * caller already set message->status; |
495 | * dma and pio irqs are blocked give finished message back | 388 | * dma and pio irqs are blocked give finished message back |
496 | */ | 389 | */ |
497 | static void bfin_spi_giveback(struct driver_data *drv_data) | 390 | static void bfin_spi_giveback(struct bfin_spi_master_data *drv_data) |
498 | { | 391 | { |
499 | struct chip_data *chip = drv_data->cur_chip; | 392 | struct bfin_spi_slave_data *chip = drv_data->cur_chip; |
500 | struct spi_transfer *last_transfer; | 393 | struct spi_transfer *last_transfer; |
501 | unsigned long flags; | 394 | unsigned long flags; |
502 | struct spi_message *msg; | 395 | struct spi_message *msg; |
@@ -525,10 +418,83 @@ static void bfin_spi_giveback(struct driver_data *drv_data) | |||
525 | msg->complete(msg->context); | 418 | msg->complete(msg->context); |
526 | } | 419 | } |
527 | 420 | ||
421 | /* spi data irq handler */ | ||
422 | static irqreturn_t bfin_spi_pio_irq_handler(int irq, void *dev_id) | ||
423 | { | ||
424 | struct bfin_spi_master_data *drv_data = dev_id; | ||
425 | struct bfin_spi_slave_data *chip = drv_data->cur_chip; | ||
426 | struct spi_message *msg = drv_data->cur_msg; | ||
427 | int n_bytes = drv_data->n_bytes; | ||
428 | |||
429 | /* wait until transfer finished. */ | ||
430 | while (!(read_STAT(drv_data) & BIT_STAT_RXS)) | ||
431 | cpu_relax(); | ||
432 | |||
433 | if ((drv_data->tx && drv_data->tx >= drv_data->tx_end) || | ||
434 | (drv_data->rx && drv_data->rx >= (drv_data->rx_end - n_bytes))) { | ||
435 | /* last read */ | ||
436 | if (drv_data->rx) { | ||
437 | dev_dbg(&drv_data->pdev->dev, "last read\n"); | ||
438 | if (n_bytes == 2) | ||
439 | *(u16 *) (drv_data->rx) = read_RDBR(drv_data); | ||
440 | else if (n_bytes == 1) | ||
441 | *(u8 *) (drv_data->rx) = read_RDBR(drv_data); | ||
442 | drv_data->rx += n_bytes; | ||
443 | } | ||
444 | |||
445 | msg->actual_length += drv_data->len_in_bytes; | ||
446 | if (drv_data->cs_change) | ||
447 | bfin_spi_cs_deactive(drv_data, chip); | ||
448 | /* Move to next transfer */ | ||
449 | msg->state = bfin_spi_next_transfer(drv_data); | ||
450 | |||
451 | disable_irq_nosync(drv_data->spi_irq); | ||
452 | |||
453 | /* Schedule transfer tasklet */ | ||
454 | tasklet_schedule(&drv_data->pump_transfers); | ||
455 | return IRQ_HANDLED; | ||
456 | } | ||
457 | |||
458 | if (drv_data->rx && drv_data->tx) { | ||
459 | /* duplex */ | ||
460 | dev_dbg(&drv_data->pdev->dev, "duplex: write_TDBR\n"); | ||
461 | if (drv_data->n_bytes == 2) { | ||
462 | *(u16 *) (drv_data->rx) = read_RDBR(drv_data); | ||
463 | write_TDBR(drv_data, (*(u16 *) (drv_data->tx))); | ||
464 | } else if (drv_data->n_bytes == 1) { | ||
465 | *(u8 *) (drv_data->rx) = read_RDBR(drv_data); | ||
466 | write_TDBR(drv_data, (*(u8 *) (drv_data->tx))); | ||
467 | } | ||
468 | } else if (drv_data->rx) { | ||
469 | /* read */ | ||
470 | dev_dbg(&drv_data->pdev->dev, "read: write_TDBR\n"); | ||
471 | if (drv_data->n_bytes == 2) | ||
472 | *(u16 *) (drv_data->rx) = read_RDBR(drv_data); | ||
473 | else if (drv_data->n_bytes == 1) | ||
474 | *(u8 *) (drv_data->rx) = read_RDBR(drv_data); | ||
475 | write_TDBR(drv_data, chip->idle_tx_val); | ||
476 | } else if (drv_data->tx) { | ||
477 | /* write */ | ||
478 | dev_dbg(&drv_data->pdev->dev, "write: write_TDBR\n"); | ||
479 | bfin_spi_dummy_read(drv_data); | ||
480 | if (drv_data->n_bytes == 2) | ||
481 | write_TDBR(drv_data, (*(u16 *) (drv_data->tx))); | ||
482 | else if (drv_data->n_bytes == 1) | ||
483 | write_TDBR(drv_data, (*(u8 *) (drv_data->tx))); | ||
484 | } | ||
485 | |||
486 | if (drv_data->tx) | ||
487 | drv_data->tx += n_bytes; | ||
488 | if (drv_data->rx) | ||
489 | drv_data->rx += n_bytes; | ||
490 | |||
491 | return IRQ_HANDLED; | ||
492 | } | ||
493 | |||
528 | static irqreturn_t bfin_spi_dma_irq_handler(int irq, void *dev_id) | 494 | static irqreturn_t bfin_spi_dma_irq_handler(int irq, void *dev_id) |
529 | { | 495 | { |
530 | struct driver_data *drv_data = dev_id; | 496 | struct bfin_spi_master_data *drv_data = dev_id; |
531 | struct chip_data *chip = drv_data->cur_chip; | 497 | struct bfin_spi_slave_data *chip = drv_data->cur_chip; |
532 | struct spi_message *msg = drv_data->cur_msg; | 498 | struct spi_message *msg = drv_data->cur_msg; |
533 | unsigned long timeout; | 499 | unsigned long timeout; |
534 | unsigned short dmastat = get_dma_curr_irqstat(drv_data->dma_channel); | 500 | unsigned short dmastat = get_dma_curr_irqstat(drv_data->dma_channel); |
@@ -540,10 +506,6 @@ static irqreturn_t bfin_spi_dma_irq_handler(int irq, void *dev_id) | |||
540 | 506 | ||
541 | clear_dma_irqstat(drv_data->dma_channel); | 507 | clear_dma_irqstat(drv_data->dma_channel); |
542 | 508 | ||
543 | /* Wait for DMA to complete */ | ||
544 | while (get_dma_curr_irqstat(drv_data->dma_channel) & DMA_RUN) | ||
545 | cpu_relax(); | ||
546 | |||
547 | /* | 509 | /* |
548 | * wait for the last transaction shifted out. HRM states: | 510 | * wait for the last transaction shifted out. HRM states: |
549 | * at this point there may still be data in the SPI DMA FIFO waiting | 511 | * at this point there may still be data in the SPI DMA FIFO waiting |
@@ -551,8 +513,8 @@ static irqreturn_t bfin_spi_dma_irq_handler(int irq, void *dev_id) | |||
551 | * register until it goes low for 2 successive reads | 513 | * register until it goes low for 2 successive reads |
552 | */ | 514 | */ |
553 | if (drv_data->tx != NULL) { | 515 | if (drv_data->tx != NULL) { |
554 | while ((read_STAT(drv_data) & TXS) || | 516 | while ((read_STAT(drv_data) & BIT_STAT_TXS) || |
555 | (read_STAT(drv_data) & TXS)) | 517 | (read_STAT(drv_data) & BIT_STAT_TXS)) |
556 | cpu_relax(); | 518 | cpu_relax(); |
557 | } | 519 | } |
558 | 520 | ||
@@ -561,14 +523,14 @@ static irqreturn_t bfin_spi_dma_irq_handler(int irq, void *dev_id) | |||
561 | dmastat, read_STAT(drv_data)); | 523 | dmastat, read_STAT(drv_data)); |
562 | 524 | ||
563 | timeout = jiffies + HZ; | 525 | timeout = jiffies + HZ; |
564 | while (!(read_STAT(drv_data) & SPIF)) | 526 | while (!(read_STAT(drv_data) & BIT_STAT_SPIF)) |
565 | if (!time_before(jiffies, timeout)) { | 527 | if (!time_before(jiffies, timeout)) { |
566 | dev_warn(&drv_data->pdev->dev, "timeout waiting for SPIF"); | 528 | dev_warn(&drv_data->pdev->dev, "timeout waiting for SPIF"); |
567 | break; | 529 | break; |
568 | } else | 530 | } else |
569 | cpu_relax(); | 531 | cpu_relax(); |
570 | 532 | ||
571 | if ((dmastat & DMA_ERR) && (spistat & RBSY)) { | 533 | if ((dmastat & DMA_ERR) && (spistat & BIT_STAT_RBSY)) { |
572 | msg->state = ERROR_STATE; | 534 | msg->state = ERROR_STATE; |
573 | dev_err(&drv_data->pdev->dev, "dma receive: fifo/buffer overflow\n"); | 535 | dev_err(&drv_data->pdev->dev, "dma receive: fifo/buffer overflow\n"); |
574 | } else { | 536 | } else { |
@@ -588,20 +550,20 @@ static irqreturn_t bfin_spi_dma_irq_handler(int irq, void *dev_id) | |||
588 | dev_dbg(&drv_data->pdev->dev, | 550 | dev_dbg(&drv_data->pdev->dev, |
589 | "disable dma channel irq%d\n", | 551 | "disable dma channel irq%d\n", |
590 | drv_data->dma_channel); | 552 | drv_data->dma_channel); |
591 | dma_disable_irq(drv_data->dma_channel); | 553 | dma_disable_irq_nosync(drv_data->dma_channel); |
592 | 554 | ||
593 | return IRQ_HANDLED; | 555 | return IRQ_HANDLED; |
594 | } | 556 | } |
595 | 557 | ||
596 | static void bfin_spi_pump_transfers(unsigned long data) | 558 | static void bfin_spi_pump_transfers(unsigned long data) |
597 | { | 559 | { |
598 | struct driver_data *drv_data = (struct driver_data *)data; | 560 | struct bfin_spi_master_data *drv_data = (struct bfin_spi_master_data *)data; |
599 | struct spi_message *message = NULL; | 561 | struct spi_message *message = NULL; |
600 | struct spi_transfer *transfer = NULL; | 562 | struct spi_transfer *transfer = NULL; |
601 | struct spi_transfer *previous = NULL; | 563 | struct spi_transfer *previous = NULL; |
602 | struct chip_data *chip = NULL; | 564 | struct bfin_spi_slave_data *chip = NULL; |
603 | u8 width; | 565 | unsigned int bits_per_word; |
604 | u16 cr, dma_width, dma_config; | 566 | u16 cr, cr_width, dma_width, dma_config; |
605 | u32 tranf_success = 1; | 567 | u32 tranf_success = 1; |
606 | u8 full_duplex = 0; | 568 | u8 full_duplex = 0; |
607 | 569 | ||
@@ -639,7 +601,7 @@ static void bfin_spi_pump_transfers(unsigned long data) | |||
639 | udelay(previous->delay_usecs); | 601 | udelay(previous->delay_usecs); |
640 | } | 602 | } |
641 | 603 | ||
642 | /* Setup the transfer state based on the type of transfer */ | 604 | /* Flush any existing transfers that may be sitting in the hardware */ |
643 | if (bfin_spi_flush(drv_data) == 0) { | 605 | if (bfin_spi_flush(drv_data) == 0) { |
644 | dev_err(&drv_data->pdev->dev, "pump_transfers: flush failed\n"); | 606 | dev_err(&drv_data->pdev->dev, "pump_transfers: flush failed\n"); |
645 | message->status = -EIO; | 607 | message->status = -EIO; |
@@ -679,52 +641,31 @@ static void bfin_spi_pump_transfers(unsigned long data) | |||
679 | drv_data->cs_change = transfer->cs_change; | 641 | drv_data->cs_change = transfer->cs_change; |
680 | 642 | ||
681 | /* Bits per word setup */ | 643 | /* Bits per word setup */ |
682 | switch (transfer->bits_per_word) { | 644 | bits_per_word = transfer->bits_per_word ? : message->spi->bits_per_word; |
683 | case 8: | 645 | if (bits_per_word == 8) { |
684 | drv_data->n_bytes = 1; | 646 | drv_data->n_bytes = 1; |
685 | width = CFG_SPI_WORDSIZE8; | 647 | drv_data->len = transfer->len; |
686 | drv_data->read = chip->cs_change_per_word ? | 648 | cr_width = 0; |
687 | bfin_spi_u8_cs_chg_reader : bfin_spi_u8_reader; | 649 | drv_data->ops = &bfin_bfin_spi_transfer_ops_u8; |
688 | drv_data->write = chip->cs_change_per_word ? | 650 | } else if (bits_per_word == 16) { |
689 | bfin_spi_u8_cs_chg_writer : bfin_spi_u8_writer; | ||
690 | drv_data->duplex = chip->cs_change_per_word ? | ||
691 | bfin_spi_u8_cs_chg_duplex : bfin_spi_u8_duplex; | ||
692 | break; | ||
693 | |||
694 | case 16: | ||
695 | drv_data->n_bytes = 2; | 651 | drv_data->n_bytes = 2; |
696 | width = CFG_SPI_WORDSIZE16; | ||
697 | drv_data->read = chip->cs_change_per_word ? | ||
698 | bfin_spi_u16_cs_chg_reader : bfin_spi_u16_reader; | ||
699 | drv_data->write = chip->cs_change_per_word ? | ||
700 | bfin_spi_u16_cs_chg_writer : bfin_spi_u16_writer; | ||
701 | drv_data->duplex = chip->cs_change_per_word ? | ||
702 | bfin_spi_u16_cs_chg_duplex : bfin_spi_u16_duplex; | ||
703 | break; | ||
704 | |||
705 | default: | ||
706 | /* No change, the same as default setting */ | ||
707 | drv_data->n_bytes = chip->n_bytes; | ||
708 | width = chip->width; | ||
709 | drv_data->write = drv_data->tx ? chip->write : bfin_spi_null_writer; | ||
710 | drv_data->read = drv_data->rx ? chip->read : bfin_spi_null_reader; | ||
711 | drv_data->duplex = chip->duplex ? chip->duplex : bfin_spi_null_writer; | ||
712 | break; | ||
713 | } | ||
714 | cr = (read_CTRL(drv_data) & (~BIT_CTL_TIMOD)); | ||
715 | cr |= (width << 8); | ||
716 | write_CTRL(drv_data, cr); | ||
717 | |||
718 | if (width == CFG_SPI_WORDSIZE16) { | ||
719 | drv_data->len = (transfer->len) >> 1; | 652 | drv_data->len = (transfer->len) >> 1; |
653 | cr_width = BIT_CTL_WORDSIZE; | ||
654 | drv_data->ops = &bfin_bfin_spi_transfer_ops_u16; | ||
720 | } else { | 655 | } else { |
721 | drv_data->len = transfer->len; | 656 | dev_err(&drv_data->pdev->dev, "transfer: unsupported bits_per_word\n"); |
657 | message->status = -EINVAL; | ||
658 | bfin_spi_giveback(drv_data); | ||
659 | return; | ||
722 | } | 660 | } |
661 | cr = read_CTRL(drv_data) & ~(BIT_CTL_TIMOD | BIT_CTL_WORDSIZE); | ||
662 | cr |= cr_width; | ||
663 | write_CTRL(drv_data, cr); | ||
664 | |||
723 | dev_dbg(&drv_data->pdev->dev, | 665 | dev_dbg(&drv_data->pdev->dev, |
724 | "transfer: drv_data->write is %p, chip->write is %p, null_wr is %p\n", | 666 | "transfer: drv_data->ops is %p, chip->ops is %p, u8_ops is %p\n", |
725 | drv_data->write, chip->write, bfin_spi_null_writer); | 667 | drv_data->ops, chip->ops, &bfin_bfin_spi_transfer_ops_u8); |
726 | 668 | ||
727 | /* speed and width has been set on per message */ | ||
728 | message->state = RUNNING_STATE; | 669 | message->state = RUNNING_STATE; |
729 | dma_config = 0; | 670 | dma_config = 0; |
730 | 671 | ||
@@ -735,13 +676,11 @@ static void bfin_spi_pump_transfers(unsigned long data) | |||
735 | write_BAUD(drv_data, chip->baud); | 676 | write_BAUD(drv_data, chip->baud); |
736 | 677 | ||
737 | write_STAT(drv_data, BIT_STAT_CLR); | 678 | write_STAT(drv_data, BIT_STAT_CLR); |
738 | cr = (read_CTRL(drv_data) & (~BIT_CTL_TIMOD)); | 679 | bfin_spi_cs_active(drv_data, chip); |
739 | if (drv_data->cs_change) | ||
740 | bfin_spi_cs_active(drv_data, chip); | ||
741 | 680 | ||
742 | dev_dbg(&drv_data->pdev->dev, | 681 | dev_dbg(&drv_data->pdev->dev, |
743 | "now pumping a transfer: width is %d, len is %d\n", | 682 | "now pumping a transfer: width is %d, len is %d\n", |
744 | width, transfer->len); | 683 | cr_width, transfer->len); |
745 | 684 | ||
746 | /* | 685 | /* |
747 | * Try to map dma buffer and do a dma transfer. If successful use, | 686 | * Try to map dma buffer and do a dma transfer. If successful use, |
@@ -760,7 +699,7 @@ static void bfin_spi_pump_transfers(unsigned long data) | |||
760 | /* config dma channel */ | 699 | /* config dma channel */ |
761 | dev_dbg(&drv_data->pdev->dev, "doing dma transfer\n"); | 700 | dev_dbg(&drv_data->pdev->dev, "doing dma transfer\n"); |
762 | set_dma_x_count(drv_data->dma_channel, drv_data->len); | 701 | set_dma_x_count(drv_data->dma_channel, drv_data->len); |
763 | if (width == CFG_SPI_WORDSIZE16) { | 702 | if (cr_width == BIT_CTL_WORDSIZE) { |
764 | set_dma_x_modify(drv_data->dma_channel, 2); | 703 | set_dma_x_modify(drv_data->dma_channel, 2); |
765 | dma_width = WDSIZE_16; | 704 | dma_width = WDSIZE_16; |
766 | } else { | 705 | } else { |
@@ -846,73 +785,100 @@ static void bfin_spi_pump_transfers(unsigned long data) | |||
846 | dma_enable_irq(drv_data->dma_channel); | 785 | dma_enable_irq(drv_data->dma_channel); |
847 | local_irq_restore(flags); | 786 | local_irq_restore(flags); |
848 | 787 | ||
849 | } else { | 788 | return; |
850 | /* IO mode write then read */ | 789 | } |
851 | dev_dbg(&drv_data->pdev->dev, "doing IO transfer\n"); | ||
852 | |||
853 | /* we always use SPI_WRITE mode. SPI_READ mode | ||
854 | seems to have problems with setting up the | ||
855 | output value in TDBR prior to the transfer. */ | ||
856 | write_CTRL(drv_data, (cr | CFG_SPI_WRITE)); | ||
857 | |||
858 | if (full_duplex) { | ||
859 | /* full duplex mode */ | ||
860 | BUG_ON((drv_data->tx_end - drv_data->tx) != | ||
861 | (drv_data->rx_end - drv_data->rx)); | ||
862 | dev_dbg(&drv_data->pdev->dev, | ||
863 | "IO duplex: cr is 0x%x\n", cr); | ||
864 | |||
865 | drv_data->duplex(drv_data); | ||
866 | 790 | ||
867 | if (drv_data->tx != drv_data->tx_end) | 791 | /* |
868 | tranf_success = 0; | 792 | * We always use SPI_WRITE mode (transfer starts with TDBR write). |
869 | } else if (drv_data->tx != NULL) { | 793 | * SPI_READ mode (transfer starts with RDBR read) seems to have |
870 | /* write only half duplex */ | 794 | * problems with setting up the output value in TDBR prior to the |
871 | dev_dbg(&drv_data->pdev->dev, | 795 | * start of the transfer. |
872 | "IO write: cr is 0x%x\n", cr); | 796 | */ |
797 | write_CTRL(drv_data, cr | BIT_CTL_TXMOD); | ||
873 | 798 | ||
874 | drv_data->write(drv_data); | 799 | if (chip->pio_interrupt) { |
800 | /* SPI irq should have been disabled by now */ | ||
875 | 801 | ||
876 | if (drv_data->tx != drv_data->tx_end) | 802 | /* discard old RX data and clear RXS */ |
877 | tranf_success = 0; | 803 | bfin_spi_dummy_read(drv_data); |
878 | } else if (drv_data->rx != NULL) { | ||
879 | /* read only half duplex */ | ||
880 | dev_dbg(&drv_data->pdev->dev, | ||
881 | "IO read: cr is 0x%x\n", cr); | ||
882 | 804 | ||
883 | drv_data->read(drv_data); | 805 | /* start transfer */ |
884 | if (drv_data->rx != drv_data->rx_end) | 806 | if (drv_data->tx == NULL) |
885 | tranf_success = 0; | 807 | write_TDBR(drv_data, chip->idle_tx_val); |
808 | else { | ||
809 | if (bits_per_word == 8) | ||
810 | write_TDBR(drv_data, (*(u8 *) (drv_data->tx))); | ||
811 | else | ||
812 | write_TDBR(drv_data, (*(u16 *) (drv_data->tx))); | ||
813 | drv_data->tx += drv_data->n_bytes; | ||
886 | } | 814 | } |
887 | 815 | ||
888 | if (!tranf_success) { | 816 | /* once TDBR is empty, interrupt is triggered */ |
889 | dev_dbg(&drv_data->pdev->dev, | 817 | enable_irq(drv_data->spi_irq); |
890 | "IO write error!\n"); | 818 | return; |
891 | message->state = ERROR_STATE; | 819 | } |
892 | } else { | 820 | |
893 | /* Update total byte transfered */ | 821 | /* IO mode */ |
894 | message->actual_length += drv_data->len_in_bytes; | 822 | dev_dbg(&drv_data->pdev->dev, "doing IO transfer\n"); |
895 | /* Move to next transfer of this msg */ | 823 | |
896 | message->state = bfin_spi_next_transfer(drv_data); | 824 | if (full_duplex) { |
897 | if (drv_data->cs_change) | 825 | /* full duplex mode */ |
898 | bfin_spi_cs_deactive(drv_data, chip); | 826 | BUG_ON((drv_data->tx_end - drv_data->tx) != |
899 | } | 827 | (drv_data->rx_end - drv_data->rx)); |
900 | /* Schedule next transfer tasklet */ | 828 | dev_dbg(&drv_data->pdev->dev, |
901 | tasklet_schedule(&drv_data->pump_transfers); | 829 | "IO duplex: cr is 0x%x\n", cr); |
830 | |||
831 | drv_data->ops->duplex(drv_data); | ||
832 | |||
833 | if (drv_data->tx != drv_data->tx_end) | ||
834 | tranf_success = 0; | ||
835 | } else if (drv_data->tx != NULL) { | ||
836 | /* write only half duplex */ | ||
837 | dev_dbg(&drv_data->pdev->dev, | ||
838 | "IO write: cr is 0x%x\n", cr); | ||
839 | |||
840 | drv_data->ops->write(drv_data); | ||
841 | |||
842 | if (drv_data->tx != drv_data->tx_end) | ||
843 | tranf_success = 0; | ||
844 | } else if (drv_data->rx != NULL) { | ||
845 | /* read only half duplex */ | ||
846 | dev_dbg(&drv_data->pdev->dev, | ||
847 | "IO read: cr is 0x%x\n", cr); | ||
848 | |||
849 | drv_data->ops->read(drv_data); | ||
850 | if (drv_data->rx != drv_data->rx_end) | ||
851 | tranf_success = 0; | ||
852 | } | ||
853 | |||
854 | if (!tranf_success) { | ||
855 | dev_dbg(&drv_data->pdev->dev, | ||
856 | "IO write error!\n"); | ||
857 | message->state = ERROR_STATE; | ||
858 | } else { | ||
859 | /* Update total byte transfered */ | ||
860 | message->actual_length += drv_data->len_in_bytes; | ||
861 | /* Move to next transfer of this msg */ | ||
862 | message->state = bfin_spi_next_transfer(drv_data); | ||
863 | if (drv_data->cs_change) | ||
864 | bfin_spi_cs_deactive(drv_data, chip); | ||
902 | } | 865 | } |
866 | |||
867 | /* Schedule next transfer tasklet */ | ||
868 | tasklet_schedule(&drv_data->pump_transfers); | ||
903 | } | 869 | } |
904 | 870 | ||
905 | /* pop a msg from queue and kick off real transfer */ | 871 | /* pop a msg from queue and kick off real transfer */ |
906 | static void bfin_spi_pump_messages(struct work_struct *work) | 872 | static void bfin_spi_pump_messages(struct work_struct *work) |
907 | { | 873 | { |
908 | struct driver_data *drv_data; | 874 | struct bfin_spi_master_data *drv_data; |
909 | unsigned long flags; | 875 | unsigned long flags; |
910 | 876 | ||
911 | drv_data = container_of(work, struct driver_data, pump_messages); | 877 | drv_data = container_of(work, struct bfin_spi_master_data, pump_messages); |
912 | 878 | ||
913 | /* Lock queue and check for queue work */ | 879 | /* Lock queue and check for queue work */ |
914 | spin_lock_irqsave(&drv_data->lock, flags); | 880 | spin_lock_irqsave(&drv_data->lock, flags); |
915 | if (list_empty(&drv_data->queue) || drv_data->run == QUEUE_STOPPED) { | 881 | if (list_empty(&drv_data->queue) || !drv_data->running) { |
916 | /* pumper kicked off but no work to do */ | 882 | /* pumper kicked off but no work to do */ |
917 | drv_data->busy = 0; | 883 | drv_data->busy = 0; |
918 | spin_unlock_irqrestore(&drv_data->lock, flags); | 884 | spin_unlock_irqrestore(&drv_data->lock, flags); |
@@ -962,12 +928,12 @@ static void bfin_spi_pump_messages(struct work_struct *work) | |||
962 | */ | 928 | */ |
963 | static int bfin_spi_transfer(struct spi_device *spi, struct spi_message *msg) | 929 | static int bfin_spi_transfer(struct spi_device *spi, struct spi_message *msg) |
964 | { | 930 | { |
965 | struct driver_data *drv_data = spi_master_get_devdata(spi->master); | 931 | struct bfin_spi_master_data *drv_data = spi_master_get_devdata(spi->master); |
966 | unsigned long flags; | 932 | unsigned long flags; |
967 | 933 | ||
968 | spin_lock_irqsave(&drv_data->lock, flags); | 934 | spin_lock_irqsave(&drv_data->lock, flags); |
969 | 935 | ||
970 | if (drv_data->run == QUEUE_STOPPED) { | 936 | if (!drv_data->running) { |
971 | spin_unlock_irqrestore(&drv_data->lock, flags); | 937 | spin_unlock_irqrestore(&drv_data->lock, flags); |
972 | return -ESHUTDOWN; | 938 | return -ESHUTDOWN; |
973 | } | 939 | } |
@@ -979,7 +945,7 @@ static int bfin_spi_transfer(struct spi_device *spi, struct spi_message *msg) | |||
979 | dev_dbg(&spi->dev, "adding an msg in transfer() \n"); | 945 | dev_dbg(&spi->dev, "adding an msg in transfer() \n"); |
980 | list_add_tail(&msg->queue, &drv_data->queue); | 946 | list_add_tail(&msg->queue, &drv_data->queue); |
981 | 947 | ||
982 | if (drv_data->run == QUEUE_RUNNING && !drv_data->busy) | 948 | if (drv_data->running && !drv_data->busy) |
983 | queue_work(drv_data->workqueue, &drv_data->pump_messages); | 949 | queue_work(drv_data->workqueue, &drv_data->pump_messages); |
984 | 950 | ||
985 | spin_unlock_irqrestore(&drv_data->lock, flags); | 951 | spin_unlock_irqrestore(&drv_data->lock, flags); |
@@ -1003,147 +969,184 @@ static u16 ssel[][MAX_SPI_SSEL] = { | |||
1003 | P_SPI2_SSEL6, P_SPI2_SSEL7}, | 969 | P_SPI2_SSEL6, P_SPI2_SSEL7}, |
1004 | }; | 970 | }; |
1005 | 971 | ||
1006 | /* first setup for new devices */ | 972 | /* setup for devices (may be called multiple times -- not just first setup) */ |
1007 | static int bfin_spi_setup(struct spi_device *spi) | 973 | static int bfin_spi_setup(struct spi_device *spi) |
1008 | { | 974 | { |
1009 | struct bfin5xx_spi_chip *chip_info = NULL; | 975 | struct bfin5xx_spi_chip *chip_info; |
1010 | struct chip_data *chip; | 976 | struct bfin_spi_slave_data *chip = NULL; |
1011 | struct driver_data *drv_data = spi_master_get_devdata(spi->master); | 977 | struct bfin_spi_master_data *drv_data = spi_master_get_devdata(spi->master); |
1012 | int ret; | 978 | u16 bfin_ctl_reg; |
1013 | 979 | int ret = -EINVAL; | |
1014 | if (spi->bits_per_word != 8 && spi->bits_per_word != 16) | ||
1015 | return -EINVAL; | ||
1016 | 980 | ||
1017 | /* Only alloc (or use chip_info) on first setup */ | 981 | /* Only alloc (or use chip_info) on first setup */ |
982 | chip_info = NULL; | ||
1018 | chip = spi_get_ctldata(spi); | 983 | chip = spi_get_ctldata(spi); |
1019 | if (chip == NULL) { | 984 | if (chip == NULL) { |
1020 | chip = kzalloc(sizeof(struct chip_data), GFP_KERNEL); | 985 | chip = kzalloc(sizeof(*chip), GFP_KERNEL); |
1021 | if (!chip) | 986 | if (!chip) { |
1022 | return -ENOMEM; | 987 | dev_err(&spi->dev, "cannot allocate chip data\n"); |
988 | ret = -ENOMEM; | ||
989 | goto error; | ||
990 | } | ||
1023 | 991 | ||
1024 | chip->enable_dma = 0; | 992 | chip->enable_dma = 0; |
1025 | chip_info = spi->controller_data; | 993 | chip_info = spi->controller_data; |
1026 | } | 994 | } |
1027 | 995 | ||
996 | /* Let people set non-standard bits directly */ | ||
997 | bfin_ctl_reg = BIT_CTL_OPENDRAIN | BIT_CTL_EMISO | | ||
998 | BIT_CTL_PSSE | BIT_CTL_GM | BIT_CTL_SZ; | ||
999 | |||
1028 | /* chip_info isn't always needed */ | 1000 | /* chip_info isn't always needed */ |
1029 | if (chip_info) { | 1001 | if (chip_info) { |
1030 | /* Make sure people stop trying to set fields via ctl_reg | 1002 | /* Make sure people stop trying to set fields via ctl_reg |
1031 | * when they should actually be using common SPI framework. | 1003 | * when they should actually be using common SPI framework. |
1032 | * Currently we let through: WOM EMISO PSSE GM SZ TIMOD. | 1004 | * Currently we let through: WOM EMISO PSSE GM SZ. |
1033 | * Not sure if a user actually needs/uses any of these, | 1005 | * Not sure if a user actually needs/uses any of these, |
1034 | * but let's assume (for now) they do. | 1006 | * but let's assume (for now) they do. |
1035 | */ | 1007 | */ |
1036 | if (chip_info->ctl_reg & (SPE|MSTR|CPOL|CPHA|LSBF|SIZE)) { | 1008 | if (chip_info->ctl_reg & ~bfin_ctl_reg) { |
1037 | dev_err(&spi->dev, "do not set bits in ctl_reg " | 1009 | dev_err(&spi->dev, "do not set bits in ctl_reg " |
1038 | "that the SPI framework manages\n"); | 1010 | "that the SPI framework manages\n"); |
1039 | return -EINVAL; | 1011 | goto error; |
1040 | } | 1012 | } |
1041 | |||
1042 | chip->enable_dma = chip_info->enable_dma != 0 | 1013 | chip->enable_dma = chip_info->enable_dma != 0 |
1043 | && drv_data->master_info->enable_dma; | 1014 | && drv_data->master_info->enable_dma; |
1044 | chip->ctl_reg = chip_info->ctl_reg; | 1015 | chip->ctl_reg = chip_info->ctl_reg; |
1045 | chip->bits_per_word = chip_info->bits_per_word; | ||
1046 | chip->cs_change_per_word = chip_info->cs_change_per_word; | ||
1047 | chip->cs_chg_udelay = chip_info->cs_chg_udelay; | 1016 | chip->cs_chg_udelay = chip_info->cs_chg_udelay; |
1048 | chip->cs_gpio = chip_info->cs_gpio; | ||
1049 | chip->idle_tx_val = chip_info->idle_tx_val; | 1017 | chip->idle_tx_val = chip_info->idle_tx_val; |
1018 | chip->pio_interrupt = chip_info->pio_interrupt; | ||
1019 | spi->bits_per_word = chip_info->bits_per_word; | ||
1020 | } else { | ||
1021 | /* force a default base state */ | ||
1022 | chip->ctl_reg &= bfin_ctl_reg; | ||
1023 | } | ||
1024 | |||
1025 | if (spi->bits_per_word != 8 && spi->bits_per_word != 16) { | ||
1026 | dev_err(&spi->dev, "%d bits_per_word is not supported\n", | ||
1027 | spi->bits_per_word); | ||
1028 | goto error; | ||
1050 | } | 1029 | } |
1051 | 1030 | ||
1052 | /* translate common spi framework into our register */ | 1031 | /* translate common spi framework into our register */ |
1032 | if (spi->mode & ~(SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST)) { | ||
1033 | dev_err(&spi->dev, "unsupported spi modes detected\n"); | ||
1034 | goto error; | ||
1035 | } | ||
1053 | if (spi->mode & SPI_CPOL) | 1036 | if (spi->mode & SPI_CPOL) |
1054 | chip->ctl_reg |= CPOL; | 1037 | chip->ctl_reg |= BIT_CTL_CPOL; |
1055 | if (spi->mode & SPI_CPHA) | 1038 | if (spi->mode & SPI_CPHA) |
1056 | chip->ctl_reg |= CPHA; | 1039 | chip->ctl_reg |= BIT_CTL_CPHA; |
1057 | if (spi->mode & SPI_LSB_FIRST) | 1040 | if (spi->mode & SPI_LSB_FIRST) |
1058 | chip->ctl_reg |= LSBF; | 1041 | chip->ctl_reg |= BIT_CTL_LSBF; |
1059 | /* we dont support running in slave mode (yet?) */ | 1042 | /* we dont support running in slave mode (yet?) */ |
1060 | chip->ctl_reg |= MSTR; | 1043 | chip->ctl_reg |= BIT_CTL_MASTER; |
1061 | 1044 | ||
1062 | /* | 1045 | /* |
1046 | * Notice: for blackfin, the speed_hz is the value of register | ||
1047 | * SPI_BAUD, not the real baudrate | ||
1048 | */ | ||
1049 | chip->baud = hz_to_spi_baud(spi->max_speed_hz); | ||
1050 | chip->chip_select_num = spi->chip_select; | ||
1051 | if (chip->chip_select_num < MAX_CTRL_CS) { | ||
1052 | if (!(spi->mode & SPI_CPHA)) | ||
1053 | dev_warn(&spi->dev, "Warning: SPI CPHA not set:" | ||
1054 | " Slave Select not under software control!\n" | ||
1055 | " See Documentation/blackfin/bfin-spi-notes.txt"); | ||
1056 | |||
1057 | chip->flag = (1 << spi->chip_select) << 8; | ||
1058 | } else | ||
1059 | chip->cs_gpio = chip->chip_select_num - MAX_CTRL_CS; | ||
1060 | |||
1061 | if (chip->enable_dma && chip->pio_interrupt) { | ||
1062 | dev_err(&spi->dev, "enable_dma is set, " | ||
1063 | "do not set pio_interrupt\n"); | ||
1064 | goto error; | ||
1065 | } | ||
1066 | /* | ||
1063 | * if any one SPI chip is registered and wants DMA, request the | 1067 | * if any one SPI chip is registered and wants DMA, request the |
1064 | * DMA channel for it | 1068 | * DMA channel for it |
1065 | */ | 1069 | */ |
1066 | if (chip->enable_dma && !drv_data->dma_requested) { | 1070 | if (chip->enable_dma && !drv_data->dma_requested) { |
1067 | /* register dma irq handler */ | 1071 | /* register dma irq handler */ |
1068 | if (request_dma(drv_data->dma_channel, "BFIN_SPI_DMA") < 0) { | 1072 | ret = request_dma(drv_data->dma_channel, "BFIN_SPI_DMA"); |
1069 | dev_dbg(&spi->dev, | 1073 | if (ret) { |
1074 | dev_err(&spi->dev, | ||
1070 | "Unable to request BlackFin SPI DMA channel\n"); | 1075 | "Unable to request BlackFin SPI DMA channel\n"); |
1071 | return -ENODEV; | 1076 | goto error; |
1072 | } | 1077 | } |
1073 | if (set_dma_callback(drv_data->dma_channel, | 1078 | drv_data->dma_requested = 1; |
1074 | bfin_spi_dma_irq_handler, drv_data) < 0) { | 1079 | |
1075 | dev_dbg(&spi->dev, "Unable to set dma callback\n"); | 1080 | ret = set_dma_callback(drv_data->dma_channel, |
1076 | return -EPERM; | 1081 | bfin_spi_dma_irq_handler, drv_data); |
1082 | if (ret) { | ||
1083 | dev_err(&spi->dev, "Unable to set dma callback\n"); | ||
1084 | goto error; | ||
1077 | } | 1085 | } |
1078 | dma_disable_irq(drv_data->dma_channel); | 1086 | dma_disable_irq(drv_data->dma_channel); |
1079 | drv_data->dma_requested = 1; | ||
1080 | } | 1087 | } |
1081 | 1088 | ||
1082 | /* | 1089 | if (chip->pio_interrupt && !drv_data->irq_requested) { |
1083 | * Notice: for blackfin, the speed_hz is the value of register | 1090 | ret = request_irq(drv_data->spi_irq, bfin_spi_pio_irq_handler, |
1084 | * SPI_BAUD, not the real baudrate | 1091 | IRQF_DISABLED, "BFIN_SPI", drv_data); |
1085 | */ | 1092 | if (ret) { |
1086 | chip->baud = hz_to_spi_baud(spi->max_speed_hz); | 1093 | dev_err(&spi->dev, "Unable to register spi IRQ\n"); |
1087 | chip->flag = 1 << (spi->chip_select); | 1094 | goto error; |
1088 | chip->chip_select_num = spi->chip_select; | 1095 | } |
1096 | drv_data->irq_requested = 1; | ||
1097 | /* we use write mode, spi irq has to be disabled here */ | ||
1098 | disable_irq(drv_data->spi_irq); | ||
1099 | } | ||
1089 | 1100 | ||
1090 | if (chip->chip_select_num == 0) { | 1101 | if (chip->chip_select_num >= MAX_CTRL_CS) { |
1091 | ret = gpio_request(chip->cs_gpio, spi->modalias); | 1102 | ret = gpio_request(chip->cs_gpio, spi->modalias); |
1092 | if (ret) { | 1103 | if (ret) { |
1093 | if (drv_data->dma_requested) | 1104 | dev_err(&spi->dev, "gpio_request() error\n"); |
1094 | free_dma(drv_data->dma_channel); | 1105 | goto pin_error; |
1095 | return ret; | ||
1096 | } | 1106 | } |
1097 | gpio_direction_output(chip->cs_gpio, 1); | 1107 | gpio_direction_output(chip->cs_gpio, 1); |
1098 | } | 1108 | } |
1099 | 1109 | ||
1100 | switch (chip->bits_per_word) { | ||
1101 | case 8: | ||
1102 | chip->n_bytes = 1; | ||
1103 | chip->width = CFG_SPI_WORDSIZE8; | ||
1104 | chip->read = chip->cs_change_per_word ? | ||
1105 | bfin_spi_u8_cs_chg_reader : bfin_spi_u8_reader; | ||
1106 | chip->write = chip->cs_change_per_word ? | ||
1107 | bfin_spi_u8_cs_chg_writer : bfin_spi_u8_writer; | ||
1108 | chip->duplex = chip->cs_change_per_word ? | ||
1109 | bfin_spi_u8_cs_chg_duplex : bfin_spi_u8_duplex; | ||
1110 | break; | ||
1111 | |||
1112 | case 16: | ||
1113 | chip->n_bytes = 2; | ||
1114 | chip->width = CFG_SPI_WORDSIZE16; | ||
1115 | chip->read = chip->cs_change_per_word ? | ||
1116 | bfin_spi_u16_cs_chg_reader : bfin_spi_u16_reader; | ||
1117 | chip->write = chip->cs_change_per_word ? | ||
1118 | bfin_spi_u16_cs_chg_writer : bfin_spi_u16_writer; | ||
1119 | chip->duplex = chip->cs_change_per_word ? | ||
1120 | bfin_spi_u16_cs_chg_duplex : bfin_spi_u16_duplex; | ||
1121 | break; | ||
1122 | |||
1123 | default: | ||
1124 | dev_err(&spi->dev, "%d bits_per_word is not supported\n", | ||
1125 | chip->bits_per_word); | ||
1126 | if (chip_info) | ||
1127 | kfree(chip); | ||
1128 | return -ENODEV; | ||
1129 | } | ||
1130 | |||
1131 | dev_dbg(&spi->dev, "setup spi chip %s, width is %d, dma is %d\n", | 1110 | dev_dbg(&spi->dev, "setup spi chip %s, width is %d, dma is %d\n", |
1132 | spi->modalias, chip->width, chip->enable_dma); | 1111 | spi->modalias, spi->bits_per_word, chip->enable_dma); |
1133 | dev_dbg(&spi->dev, "ctl_reg is 0x%x, flag_reg is 0x%x\n", | 1112 | dev_dbg(&spi->dev, "ctl_reg is 0x%x, flag_reg is 0x%x\n", |
1134 | chip->ctl_reg, chip->flag); | 1113 | chip->ctl_reg, chip->flag); |
1135 | 1114 | ||
1136 | spi_set_ctldata(spi, chip); | 1115 | spi_set_ctldata(spi, chip); |
1137 | 1116 | ||
1138 | dev_dbg(&spi->dev, "chip select number is %d\n", chip->chip_select_num); | 1117 | dev_dbg(&spi->dev, "chip select number is %d\n", chip->chip_select_num); |
1139 | if ((chip->chip_select_num > 0) | 1118 | if (chip->chip_select_num < MAX_CTRL_CS) { |
1140 | && (chip->chip_select_num <= spi->master->num_chipselect)) | 1119 | ret = peripheral_request(ssel[spi->master->bus_num] |
1141 | peripheral_request(ssel[spi->master->bus_num] | 1120 | [chip->chip_select_num-1], spi->modalias); |
1142 | [chip->chip_select_num-1], spi->modalias); | 1121 | if (ret) { |
1122 | dev_err(&spi->dev, "peripheral_request() error\n"); | ||
1123 | goto pin_error; | ||
1124 | } | ||
1125 | } | ||
1143 | 1126 | ||
1127 | bfin_spi_cs_enable(drv_data, chip); | ||
1144 | bfin_spi_cs_deactive(drv_data, chip); | 1128 | bfin_spi_cs_deactive(drv_data, chip); |
1145 | 1129 | ||
1146 | return 0; | 1130 | return 0; |
1131 | |||
1132 | pin_error: | ||
1133 | if (chip->chip_select_num >= MAX_CTRL_CS) | ||
1134 | gpio_free(chip->cs_gpio); | ||
1135 | else | ||
1136 | peripheral_free(ssel[spi->master->bus_num] | ||
1137 | [chip->chip_select_num - 1]); | ||
1138 | error: | ||
1139 | if (chip) { | ||
1140 | if (drv_data->dma_requested) | ||
1141 | free_dma(drv_data->dma_channel); | ||
1142 | drv_data->dma_requested = 0; | ||
1143 | |||
1144 | kfree(chip); | ||
1145 | /* prevent free 'chip' twice */ | ||
1146 | spi_set_ctldata(spi, NULL); | ||
1147 | } | ||
1148 | |||
1149 | return ret; | ||
1147 | } | 1150 | } |
1148 | 1151 | ||
1149 | /* | 1152 | /* |
@@ -1152,28 +1155,30 @@ static int bfin_spi_setup(struct spi_device *spi) | |||
1152 | */ | 1155 | */ |
1153 | static void bfin_spi_cleanup(struct spi_device *spi) | 1156 | static void bfin_spi_cleanup(struct spi_device *spi) |
1154 | { | 1157 | { |
1155 | struct chip_data *chip = spi_get_ctldata(spi); | 1158 | struct bfin_spi_slave_data *chip = spi_get_ctldata(spi); |
1159 | struct bfin_spi_master_data *drv_data = spi_master_get_devdata(spi->master); | ||
1156 | 1160 | ||
1157 | if (!chip) | 1161 | if (!chip) |
1158 | return; | 1162 | return; |
1159 | 1163 | ||
1160 | if ((chip->chip_select_num > 0) | 1164 | if (chip->chip_select_num < MAX_CTRL_CS) { |
1161 | && (chip->chip_select_num <= spi->master->num_chipselect)) | ||
1162 | peripheral_free(ssel[spi->master->bus_num] | 1165 | peripheral_free(ssel[spi->master->bus_num] |
1163 | [chip->chip_select_num-1]); | 1166 | [chip->chip_select_num-1]); |
1164 | 1167 | bfin_spi_cs_disable(drv_data, chip); | |
1165 | if (chip->chip_select_num == 0) | 1168 | } else |
1166 | gpio_free(chip->cs_gpio); | 1169 | gpio_free(chip->cs_gpio); |
1167 | 1170 | ||
1168 | kfree(chip); | 1171 | kfree(chip); |
1172 | /* prevent free 'chip' twice */ | ||
1173 | spi_set_ctldata(spi, NULL); | ||
1169 | } | 1174 | } |
1170 | 1175 | ||
1171 | static inline int bfin_spi_init_queue(struct driver_data *drv_data) | 1176 | static inline int bfin_spi_init_queue(struct bfin_spi_master_data *drv_data) |
1172 | { | 1177 | { |
1173 | INIT_LIST_HEAD(&drv_data->queue); | 1178 | INIT_LIST_HEAD(&drv_data->queue); |
1174 | spin_lock_init(&drv_data->lock); | 1179 | spin_lock_init(&drv_data->lock); |
1175 | 1180 | ||
1176 | drv_data->run = QUEUE_STOPPED; | 1181 | drv_data->running = false; |
1177 | drv_data->busy = 0; | 1182 | drv_data->busy = 0; |
1178 | 1183 | ||
1179 | /* init transfer tasklet */ | 1184 | /* init transfer tasklet */ |
@@ -1190,18 +1195,18 @@ static inline int bfin_spi_init_queue(struct driver_data *drv_data) | |||
1190 | return 0; | 1195 | return 0; |
1191 | } | 1196 | } |
1192 | 1197 | ||
1193 | static inline int bfin_spi_start_queue(struct driver_data *drv_data) | 1198 | static inline int bfin_spi_start_queue(struct bfin_spi_master_data *drv_data) |
1194 | { | 1199 | { |
1195 | unsigned long flags; | 1200 | unsigned long flags; |
1196 | 1201 | ||
1197 | spin_lock_irqsave(&drv_data->lock, flags); | 1202 | spin_lock_irqsave(&drv_data->lock, flags); |
1198 | 1203 | ||
1199 | if (drv_data->run == QUEUE_RUNNING || drv_data->busy) { | 1204 | if (drv_data->running || drv_data->busy) { |
1200 | spin_unlock_irqrestore(&drv_data->lock, flags); | 1205 | spin_unlock_irqrestore(&drv_data->lock, flags); |
1201 | return -EBUSY; | 1206 | return -EBUSY; |
1202 | } | 1207 | } |
1203 | 1208 | ||
1204 | drv_data->run = QUEUE_RUNNING; | 1209 | drv_data->running = true; |
1205 | drv_data->cur_msg = NULL; | 1210 | drv_data->cur_msg = NULL; |
1206 | drv_data->cur_transfer = NULL; | 1211 | drv_data->cur_transfer = NULL; |
1207 | drv_data->cur_chip = NULL; | 1212 | drv_data->cur_chip = NULL; |
@@ -1212,7 +1217,7 @@ static inline int bfin_spi_start_queue(struct driver_data *drv_data) | |||
1212 | return 0; | 1217 | return 0; |
1213 | } | 1218 | } |
1214 | 1219 | ||
1215 | static inline int bfin_spi_stop_queue(struct driver_data *drv_data) | 1220 | static inline int bfin_spi_stop_queue(struct bfin_spi_master_data *drv_data) |
1216 | { | 1221 | { |
1217 | unsigned long flags; | 1222 | unsigned long flags; |
1218 | unsigned limit = 500; | 1223 | unsigned limit = 500; |
@@ -1226,7 +1231,7 @@ static inline int bfin_spi_stop_queue(struct driver_data *drv_data) | |||
1226 | * execution path (pump_messages) would be required to call wake_up or | 1231 | * execution path (pump_messages) would be required to call wake_up or |
1227 | * friends on every SPI message. Do this instead | 1232 | * friends on every SPI message. Do this instead |
1228 | */ | 1233 | */ |
1229 | drv_data->run = QUEUE_STOPPED; | 1234 | drv_data->running = false; |
1230 | while (!list_empty(&drv_data->queue) && drv_data->busy && limit--) { | 1235 | while (!list_empty(&drv_data->queue) && drv_data->busy && limit--) { |
1231 | spin_unlock_irqrestore(&drv_data->lock, flags); | 1236 | spin_unlock_irqrestore(&drv_data->lock, flags); |
1232 | msleep(10); | 1237 | msleep(10); |
@@ -1241,7 +1246,7 @@ static inline int bfin_spi_stop_queue(struct driver_data *drv_data) | |||
1241 | return status; | 1246 | return status; |
1242 | } | 1247 | } |
1243 | 1248 | ||
1244 | static inline int bfin_spi_destroy_queue(struct driver_data *drv_data) | 1249 | static inline int bfin_spi_destroy_queue(struct bfin_spi_master_data *drv_data) |
1245 | { | 1250 | { |
1246 | int status; | 1251 | int status; |
1247 | 1252 | ||
@@ -1259,14 +1264,14 @@ static int __init bfin_spi_probe(struct platform_device *pdev) | |||
1259 | struct device *dev = &pdev->dev; | 1264 | struct device *dev = &pdev->dev; |
1260 | struct bfin5xx_spi_master *platform_info; | 1265 | struct bfin5xx_spi_master *platform_info; |
1261 | struct spi_master *master; | 1266 | struct spi_master *master; |
1262 | struct driver_data *drv_data = 0; | 1267 | struct bfin_spi_master_data *drv_data; |
1263 | struct resource *res; | 1268 | struct resource *res; |
1264 | int status = 0; | 1269 | int status = 0; |
1265 | 1270 | ||
1266 | platform_info = dev->platform_data; | 1271 | platform_info = dev->platform_data; |
1267 | 1272 | ||
1268 | /* Allocate master with space for drv_data */ | 1273 | /* Allocate master with space for drv_data */ |
1269 | master = spi_alloc_master(dev, sizeof(struct driver_data) + 16); | 1274 | master = spi_alloc_master(dev, sizeof(*drv_data)); |
1270 | if (!master) { | 1275 | if (!master) { |
1271 | dev_err(&pdev->dev, "can not alloc spi_master\n"); | 1276 | dev_err(&pdev->dev, "can not alloc spi_master\n"); |
1272 | return -ENOMEM; | 1277 | return -ENOMEM; |
@@ -1302,11 +1307,19 @@ static int __init bfin_spi_probe(struct platform_device *pdev) | |||
1302 | goto out_error_ioremap; | 1307 | goto out_error_ioremap; |
1303 | } | 1308 | } |
1304 | 1309 | ||
1305 | drv_data->dma_channel = platform_get_irq(pdev, 0); | 1310 | res = platform_get_resource(pdev, IORESOURCE_DMA, 0); |
1306 | if (drv_data->dma_channel < 0) { | 1311 | if (res == NULL) { |
1307 | dev_err(dev, "No DMA channel specified\n"); | 1312 | dev_err(dev, "No DMA channel specified\n"); |
1308 | status = -ENOENT; | 1313 | status = -ENOENT; |
1309 | goto out_error_no_dma_ch; | 1314 | goto out_error_free_io; |
1315 | } | ||
1316 | drv_data->dma_channel = res->start; | ||
1317 | |||
1318 | drv_data->spi_irq = platform_get_irq(pdev, 0); | ||
1319 | if (drv_data->spi_irq < 0) { | ||
1320 | dev_err(dev, "No spi pio irq specified\n"); | ||
1321 | status = -ENOENT; | ||
1322 | goto out_error_free_io; | ||
1310 | } | 1323 | } |
1311 | 1324 | ||
1312 | /* Initial and start queue */ | 1325 | /* Initial and start queue */ |
@@ -1328,6 +1341,12 @@ static int __init bfin_spi_probe(struct platform_device *pdev) | |||
1328 | goto out_error_queue_alloc; | 1341 | goto out_error_queue_alloc; |
1329 | } | 1342 | } |
1330 | 1343 | ||
1344 | /* Reset SPI registers. If these registers were used by the boot loader, | ||
1345 | * the sky may fall on your head if you enable the dma controller. | ||
1346 | */ | ||
1347 | write_CTRL(drv_data, BIT_CTL_CPHA | BIT_CTL_MASTER); | ||
1348 | write_FLAG(drv_data, 0xFF00); | ||
1349 | |||
1331 | /* Register with the SPI framework */ | 1350 | /* Register with the SPI framework */ |
1332 | platform_set_drvdata(pdev, drv_data); | 1351 | platform_set_drvdata(pdev, drv_data); |
1333 | status = spi_register_master(master); | 1352 | status = spi_register_master(master); |
@@ -1343,7 +1362,7 @@ static int __init bfin_spi_probe(struct platform_device *pdev) | |||
1343 | 1362 | ||
1344 | out_error_queue_alloc: | 1363 | out_error_queue_alloc: |
1345 | bfin_spi_destroy_queue(drv_data); | 1364 | bfin_spi_destroy_queue(drv_data); |
1346 | out_error_no_dma_ch: | 1365 | out_error_free_io: |
1347 | iounmap((void *) drv_data->regs_base); | 1366 | iounmap((void *) drv_data->regs_base); |
1348 | out_error_ioremap: | 1367 | out_error_ioremap: |
1349 | out_error_get_res: | 1368 | out_error_get_res: |
@@ -1355,7 +1374,7 @@ out_error_get_res: | |||
1355 | /* stop hardware and remove the driver */ | 1374 | /* stop hardware and remove the driver */ |
1356 | static int __devexit bfin_spi_remove(struct platform_device *pdev) | 1375 | static int __devexit bfin_spi_remove(struct platform_device *pdev) |
1357 | { | 1376 | { |
1358 | struct driver_data *drv_data = platform_get_drvdata(pdev); | 1377 | struct bfin_spi_master_data *drv_data = platform_get_drvdata(pdev); |
1359 | int status = 0; | 1378 | int status = 0; |
1360 | 1379 | ||
1361 | if (!drv_data) | 1380 | if (!drv_data) |
@@ -1375,6 +1394,11 @@ static int __devexit bfin_spi_remove(struct platform_device *pdev) | |||
1375 | free_dma(drv_data->dma_channel); | 1394 | free_dma(drv_data->dma_channel); |
1376 | } | 1395 | } |
1377 | 1396 | ||
1397 | if (drv_data->irq_requested) { | ||
1398 | free_irq(drv_data->spi_irq, drv_data); | ||
1399 | drv_data->irq_requested = 0; | ||
1400 | } | ||
1401 | |||
1378 | /* Disconnect from the SPI framework */ | 1402 | /* Disconnect from the SPI framework */ |
1379 | spi_unregister_master(drv_data->master); | 1403 | spi_unregister_master(drv_data->master); |
1380 | 1404 | ||
@@ -1389,26 +1413,32 @@ static int __devexit bfin_spi_remove(struct platform_device *pdev) | |||
1389 | #ifdef CONFIG_PM | 1413 | #ifdef CONFIG_PM |
1390 | static int bfin_spi_suspend(struct platform_device *pdev, pm_message_t state) | 1414 | static int bfin_spi_suspend(struct platform_device *pdev, pm_message_t state) |
1391 | { | 1415 | { |
1392 | struct driver_data *drv_data = platform_get_drvdata(pdev); | 1416 | struct bfin_spi_master_data *drv_data = platform_get_drvdata(pdev); |
1393 | int status = 0; | 1417 | int status = 0; |
1394 | 1418 | ||
1395 | status = bfin_spi_stop_queue(drv_data); | 1419 | status = bfin_spi_stop_queue(drv_data); |
1396 | if (status != 0) | 1420 | if (status != 0) |
1397 | return status; | 1421 | return status; |
1398 | 1422 | ||
1399 | /* stop hardware */ | 1423 | drv_data->ctrl_reg = read_CTRL(drv_data); |
1400 | bfin_spi_disable(drv_data); | 1424 | drv_data->flag_reg = read_FLAG(drv_data); |
1425 | |||
1426 | /* | ||
1427 | * reset SPI_CTL and SPI_FLG registers | ||
1428 | */ | ||
1429 | write_CTRL(drv_data, BIT_CTL_CPHA | BIT_CTL_MASTER); | ||
1430 | write_FLAG(drv_data, 0xFF00); | ||
1401 | 1431 | ||
1402 | return 0; | 1432 | return 0; |
1403 | } | 1433 | } |
1404 | 1434 | ||
1405 | static int bfin_spi_resume(struct platform_device *pdev) | 1435 | static int bfin_spi_resume(struct platform_device *pdev) |
1406 | { | 1436 | { |
1407 | struct driver_data *drv_data = platform_get_drvdata(pdev); | 1437 | struct bfin_spi_master_data *drv_data = platform_get_drvdata(pdev); |
1408 | int status = 0; | 1438 | int status = 0; |
1409 | 1439 | ||
1410 | /* Enable the SPI interface */ | 1440 | write_CTRL(drv_data, drv_data->ctrl_reg); |
1411 | bfin_spi_enable(drv_data); | 1441 | write_FLAG(drv_data, drv_data->flag_reg); |
1412 | 1442 | ||
1413 | /* Start the queue running */ | 1443 | /* Start the queue running */ |
1414 | status = bfin_spi_start_queue(drv_data); | 1444 | status = bfin_spi_start_queue(drv_data); |
@@ -1439,7 +1469,7 @@ static int __init bfin_spi_init(void) | |||
1439 | { | 1469 | { |
1440 | return platform_driver_probe(&bfin_spi_driver, bfin_spi_probe); | 1470 | return platform_driver_probe(&bfin_spi_driver, bfin_spi_probe); |
1441 | } | 1471 | } |
1442 | module_init(bfin_spi_init); | 1472 | subsys_initcall(bfin_spi_init); |
1443 | 1473 | ||
1444 | static void __exit bfin_spi_exit(void) | 1474 | static void __exit bfin_spi_exit(void) |
1445 | { | 1475 | { |
diff --git a/drivers/spi/spi_fsl_espi.c b/drivers/spi/spi_fsl_espi.c new file mode 100644 index 000000000000..e3b4f6451966 --- /dev/null +++ b/drivers/spi/spi_fsl_espi.c | |||
@@ -0,0 +1,748 @@ | |||
1 | /* | ||
2 | * Freescale eSPI controller driver. | ||
3 | * | ||
4 | * Copyright 2010 Freescale Semiconductor, Inc. | ||
5 | * | ||
6 | * This program is free software; you can redistribute it and/or modify it | ||
7 | * under the terms of the GNU General Public License as published by the | ||
8 | * Free Software Foundation; either version 2 of the License, or (at your | ||
9 | * option) any later version. | ||
10 | */ | ||
11 | #include <linux/module.h> | ||
12 | #include <linux/delay.h> | ||
13 | #include <linux/irq.h> | ||
14 | #include <linux/spi/spi.h> | ||
15 | #include <linux/platform_device.h> | ||
16 | #include <linux/fsl_devices.h> | ||
17 | #include <linux/mm.h> | ||
18 | #include <linux/of.h> | ||
19 | #include <linux/of_platform.h> | ||
20 | #include <linux/of_spi.h> | ||
21 | #include <linux/interrupt.h> | ||
22 | #include <linux/err.h> | ||
23 | #include <sysdev/fsl_soc.h> | ||
24 | |||
25 | #include "spi_fsl_lib.h" | ||
26 | |||
27 | /* eSPI Controller registers */ | ||
28 | struct fsl_espi_reg { | ||
29 | __be32 mode; /* 0x000 - eSPI mode register */ | ||
30 | __be32 event; /* 0x004 - eSPI event register */ | ||
31 | __be32 mask; /* 0x008 - eSPI mask register */ | ||
32 | __be32 command; /* 0x00c - eSPI command register */ | ||
33 | __be32 transmit; /* 0x010 - eSPI transmit FIFO access register*/ | ||
34 | __be32 receive; /* 0x014 - eSPI receive FIFO access register*/ | ||
35 | u8 res[8]; /* 0x018 - 0x01c reserved */ | ||
36 | __be32 csmode[4]; /* 0x020 - 0x02c eSPI cs mode register */ | ||
37 | }; | ||
38 | |||
39 | struct fsl_espi_transfer { | ||
40 | const void *tx_buf; | ||
41 | void *rx_buf; | ||
42 | unsigned len; | ||
43 | unsigned n_tx; | ||
44 | unsigned n_rx; | ||
45 | unsigned actual_length; | ||
46 | int status; | ||
47 | }; | ||
48 | |||
49 | /* eSPI Controller mode register definitions */ | ||
50 | #define SPMODE_ENABLE (1 << 31) | ||
51 | #define SPMODE_LOOP (1 << 30) | ||
52 | #define SPMODE_TXTHR(x) ((x) << 8) | ||
53 | #define SPMODE_RXTHR(x) ((x) << 0) | ||
54 | |||
55 | /* eSPI Controller CS mode register definitions */ | ||
56 | #define CSMODE_CI_INACTIVEHIGH (1 << 31) | ||
57 | #define CSMODE_CP_BEGIN_EDGECLK (1 << 30) | ||
58 | #define CSMODE_REV (1 << 29) | ||
59 | #define CSMODE_DIV16 (1 << 28) | ||
60 | #define CSMODE_PM(x) ((x) << 24) | ||
61 | #define CSMODE_POL_1 (1 << 20) | ||
62 | #define CSMODE_LEN(x) ((x) << 16) | ||
63 | #define CSMODE_BEF(x) ((x) << 12) | ||
64 | #define CSMODE_AFT(x) ((x) << 8) | ||
65 | #define CSMODE_CG(x) ((x) << 3) | ||
66 | |||
67 | /* Default mode/csmode for eSPI controller */ | ||
68 | #define SPMODE_INIT_VAL (SPMODE_TXTHR(4) | SPMODE_RXTHR(3)) | ||
69 | #define CSMODE_INIT_VAL (CSMODE_POL_1 | CSMODE_BEF(0) \ | ||
70 | | CSMODE_AFT(0) | CSMODE_CG(1)) | ||
71 | |||
72 | /* SPIE register values */ | ||
73 | #define SPIE_NE 0x00000200 /* Not empty */ | ||
74 | #define SPIE_NF 0x00000100 /* Not full */ | ||
75 | |||
76 | /* SPIM register values */ | ||
77 | #define SPIM_NE 0x00000200 /* Not empty */ | ||
78 | #define SPIM_NF 0x00000100 /* Not full */ | ||
79 | #define SPIE_RXCNT(reg) ((reg >> 24) & 0x3F) | ||
80 | #define SPIE_TXCNT(reg) ((reg >> 16) & 0x3F) | ||
81 | |||
82 | /* SPCOM register values */ | ||
83 | #define SPCOM_CS(x) ((x) << 30) | ||
84 | #define SPCOM_TRANLEN(x) ((x) << 0) | ||
85 | #define SPCOM_TRANLEN_MAX 0xFFFF /* Max transaction length */ | ||
86 | |||
87 | static void fsl_espi_change_mode(struct spi_device *spi) | ||
88 | { | ||
89 | struct mpc8xxx_spi *mspi = spi_master_get_devdata(spi->master); | ||
90 | struct spi_mpc8xxx_cs *cs = spi->controller_state; | ||
91 | struct fsl_espi_reg *reg_base = mspi->reg_base; | ||
92 | __be32 __iomem *mode = ®_base->csmode[spi->chip_select]; | ||
93 | __be32 __iomem *espi_mode = ®_base->mode; | ||
94 | u32 tmp; | ||
95 | unsigned long flags; | ||
96 | |||
97 | /* Turn off IRQs locally to minimize time that SPI is disabled. */ | ||
98 | local_irq_save(flags); | ||
99 | |||
100 | /* Turn off SPI unit prior changing mode */ | ||
101 | tmp = mpc8xxx_spi_read_reg(espi_mode); | ||
102 | mpc8xxx_spi_write_reg(espi_mode, tmp & ~SPMODE_ENABLE); | ||
103 | mpc8xxx_spi_write_reg(mode, cs->hw_mode); | ||
104 | mpc8xxx_spi_write_reg(espi_mode, tmp); | ||
105 | |||
106 | local_irq_restore(flags); | ||
107 | } | ||
108 | |||
109 | static u32 fsl_espi_tx_buf_lsb(struct mpc8xxx_spi *mpc8xxx_spi) | ||
110 | { | ||
111 | u32 data; | ||
112 | u16 data_h; | ||
113 | u16 data_l; | ||
114 | const u32 *tx = mpc8xxx_spi->tx; | ||
115 | |||
116 | if (!tx) | ||
117 | return 0; | ||
118 | |||
119 | data = *tx++ << mpc8xxx_spi->tx_shift; | ||
120 | data_l = data & 0xffff; | ||
121 | data_h = (data >> 16) & 0xffff; | ||
122 | swab16s(&data_l); | ||
123 | swab16s(&data_h); | ||
124 | data = data_h | data_l; | ||
125 | |||
126 | mpc8xxx_spi->tx = tx; | ||
127 | return data; | ||
128 | } | ||
129 | |||
130 | static int fsl_espi_setup_transfer(struct spi_device *spi, | ||
131 | struct spi_transfer *t) | ||
132 | { | ||
133 | struct mpc8xxx_spi *mpc8xxx_spi = spi_master_get_devdata(spi->master); | ||
134 | int bits_per_word = 0; | ||
135 | u8 pm; | ||
136 | u32 hz = 0; | ||
137 | struct spi_mpc8xxx_cs *cs = spi->controller_state; | ||
138 | |||
139 | if (t) { | ||
140 | bits_per_word = t->bits_per_word; | ||
141 | hz = t->speed_hz; | ||
142 | } | ||
143 | |||
144 | /* spi_transfer level calls that work per-word */ | ||
145 | if (!bits_per_word) | ||
146 | bits_per_word = spi->bits_per_word; | ||
147 | |||
148 | /* Make sure its a bit width we support [4..16] */ | ||
149 | if ((bits_per_word < 4) || (bits_per_word > 16)) | ||
150 | return -EINVAL; | ||
151 | |||
152 | if (!hz) | ||
153 | hz = spi->max_speed_hz; | ||
154 | |||
155 | cs->rx_shift = 0; | ||
156 | cs->tx_shift = 0; | ||
157 | cs->get_rx = mpc8xxx_spi_rx_buf_u32; | ||
158 | cs->get_tx = mpc8xxx_spi_tx_buf_u32; | ||
159 | if (bits_per_word <= 8) { | ||
160 | cs->rx_shift = 8 - bits_per_word; | ||
161 | } else if (bits_per_word <= 16) { | ||
162 | cs->rx_shift = 16 - bits_per_word; | ||
163 | if (spi->mode & SPI_LSB_FIRST) | ||
164 | cs->get_tx = fsl_espi_tx_buf_lsb; | ||
165 | } else { | ||
166 | return -EINVAL; | ||
167 | } | ||
168 | |||
169 | mpc8xxx_spi->rx_shift = cs->rx_shift; | ||
170 | mpc8xxx_spi->tx_shift = cs->tx_shift; | ||
171 | mpc8xxx_spi->get_rx = cs->get_rx; | ||
172 | mpc8xxx_spi->get_tx = cs->get_tx; | ||
173 | |||
174 | bits_per_word = bits_per_word - 1; | ||
175 | |||
176 | /* mask out bits we are going to set */ | ||
177 | cs->hw_mode &= ~(CSMODE_LEN(0xF) | CSMODE_DIV16 | CSMODE_PM(0xF)); | ||
178 | |||
179 | cs->hw_mode |= CSMODE_LEN(bits_per_word); | ||
180 | |||
181 | if ((mpc8xxx_spi->spibrg / hz) > 64) { | ||
182 | cs->hw_mode |= CSMODE_DIV16; | ||
183 | pm = (mpc8xxx_spi->spibrg - 1) / (hz * 64) + 1; | ||
184 | |||
185 | WARN_ONCE(pm > 16, "%s: Requested speed is too low: %d Hz. " | ||
186 | "Will use %d Hz instead.\n", dev_name(&spi->dev), | ||
187 | hz, mpc8xxx_spi->spibrg / 1024); | ||
188 | if (pm > 16) | ||
189 | pm = 16; | ||
190 | } else { | ||
191 | pm = (mpc8xxx_spi->spibrg - 1) / (hz * 4) + 1; | ||
192 | } | ||
193 | if (pm) | ||
194 | pm--; | ||
195 | |||
196 | cs->hw_mode |= CSMODE_PM(pm); | ||
197 | |||
198 | fsl_espi_change_mode(spi); | ||
199 | return 0; | ||
200 | } | ||
201 | |||
202 | static int fsl_espi_cpu_bufs(struct mpc8xxx_spi *mspi, struct spi_transfer *t, | ||
203 | unsigned int len) | ||
204 | { | ||
205 | u32 word; | ||
206 | struct fsl_espi_reg *reg_base = mspi->reg_base; | ||
207 | |||
208 | mspi->count = len; | ||
209 | |||
210 | /* enable rx ints */ | ||
211 | mpc8xxx_spi_write_reg(®_base->mask, SPIM_NE); | ||
212 | |||
213 | /* transmit word */ | ||
214 | word = mspi->get_tx(mspi); | ||
215 | mpc8xxx_spi_write_reg(®_base->transmit, word); | ||
216 | |||
217 | return 0; | ||
218 | } | ||
219 | |||
220 | static int fsl_espi_bufs(struct spi_device *spi, struct spi_transfer *t) | ||
221 | { | ||
222 | struct mpc8xxx_spi *mpc8xxx_spi = spi_master_get_devdata(spi->master); | ||
223 | struct fsl_espi_reg *reg_base = mpc8xxx_spi->reg_base; | ||
224 | unsigned int len = t->len; | ||
225 | u8 bits_per_word; | ||
226 | int ret; | ||
227 | |||
228 | bits_per_word = spi->bits_per_word; | ||
229 | if (t->bits_per_word) | ||
230 | bits_per_word = t->bits_per_word; | ||
231 | |||
232 | mpc8xxx_spi->len = t->len; | ||
233 | len = roundup(len, 4) / 4; | ||
234 | |||
235 | mpc8xxx_spi->tx = t->tx_buf; | ||
236 | mpc8xxx_spi->rx = t->rx_buf; | ||
237 | |||
238 | INIT_COMPLETION(mpc8xxx_spi->done); | ||
239 | |||
240 | /* Set SPCOM[CS] and SPCOM[TRANLEN] field */ | ||
241 | if ((t->len - 1) > SPCOM_TRANLEN_MAX) { | ||
242 | dev_err(mpc8xxx_spi->dev, "Transaction length (%d)" | ||
243 | " beyond the SPCOM[TRANLEN] field\n", t->len); | ||
244 | return -EINVAL; | ||
245 | } | ||
246 | mpc8xxx_spi_write_reg(®_base->command, | ||
247 | (SPCOM_CS(spi->chip_select) | SPCOM_TRANLEN(t->len - 1))); | ||
248 | |||
249 | ret = fsl_espi_cpu_bufs(mpc8xxx_spi, t, len); | ||
250 | if (ret) | ||
251 | return ret; | ||
252 | |||
253 | wait_for_completion(&mpc8xxx_spi->done); | ||
254 | |||
255 | /* disable rx ints */ | ||
256 | mpc8xxx_spi_write_reg(®_base->mask, 0); | ||
257 | |||
258 | return mpc8xxx_spi->count; | ||
259 | } | ||
260 | |||
261 | static void fsl_espi_addr2cmd(unsigned int addr, u8 *cmd) | ||
262 | { | ||
263 | if (cmd[1] && cmd[2] && cmd[3]) { | ||
264 | cmd[1] = (u8)(addr >> 16); | ||
265 | cmd[2] = (u8)(addr >> 8); | ||
266 | cmd[3] = (u8)(addr >> 0); | ||
267 | } | ||
268 | } | ||
269 | |||
270 | static unsigned int fsl_espi_cmd2addr(u8 *cmd) | ||
271 | { | ||
272 | if (cmd[1] && cmd[2] && cmd[3]) | ||
273 | return cmd[1] << 16 | cmd[2] << 8 | cmd[3] << 0; | ||
274 | |||
275 | return 0; | ||
276 | } | ||
277 | |||
278 | static void fsl_espi_do_trans(struct spi_message *m, | ||
279 | struct fsl_espi_transfer *tr) | ||
280 | { | ||
281 | struct spi_device *spi = m->spi; | ||
282 | struct mpc8xxx_spi *mspi = spi_master_get_devdata(spi->master); | ||
283 | struct fsl_espi_transfer *espi_trans = tr; | ||
284 | struct spi_message message; | ||
285 | struct spi_transfer *t, *first, trans; | ||
286 | int status = 0; | ||
287 | |||
288 | spi_message_init(&message); | ||
289 | memset(&trans, 0, sizeof(trans)); | ||
290 | |||
291 | first = list_first_entry(&m->transfers, struct spi_transfer, | ||
292 | transfer_list); | ||
293 | list_for_each_entry(t, &m->transfers, transfer_list) { | ||
294 | if ((first->bits_per_word != t->bits_per_word) || | ||
295 | (first->speed_hz != t->speed_hz)) { | ||
296 | espi_trans->status = -EINVAL; | ||
297 | dev_err(mspi->dev, "bits_per_word/speed_hz should be" | ||
298 | " same for the same SPI transfer\n"); | ||
299 | return; | ||
300 | } | ||
301 | |||
302 | trans.speed_hz = t->speed_hz; | ||
303 | trans.bits_per_word = t->bits_per_word; | ||
304 | trans.delay_usecs = max(first->delay_usecs, t->delay_usecs); | ||
305 | } | ||
306 | |||
307 | trans.len = espi_trans->len; | ||
308 | trans.tx_buf = espi_trans->tx_buf; | ||
309 | trans.rx_buf = espi_trans->rx_buf; | ||
310 | spi_message_add_tail(&trans, &message); | ||
311 | |||
312 | list_for_each_entry(t, &message.transfers, transfer_list) { | ||
313 | if (t->bits_per_word || t->speed_hz) { | ||
314 | status = -EINVAL; | ||
315 | |||
316 | status = fsl_espi_setup_transfer(spi, t); | ||
317 | if (status < 0) | ||
318 | break; | ||
319 | } | ||
320 | |||
321 | if (t->len) | ||
322 | status = fsl_espi_bufs(spi, t); | ||
323 | |||
324 | if (status) { | ||
325 | status = -EMSGSIZE; | ||
326 | break; | ||
327 | } | ||
328 | |||
329 | if (t->delay_usecs) | ||
330 | udelay(t->delay_usecs); | ||
331 | } | ||
332 | |||
333 | espi_trans->status = status; | ||
334 | fsl_espi_setup_transfer(spi, NULL); | ||
335 | } | ||
336 | |||
337 | static void fsl_espi_cmd_trans(struct spi_message *m, | ||
338 | struct fsl_espi_transfer *trans, u8 *rx_buff) | ||
339 | { | ||
340 | struct spi_transfer *t; | ||
341 | u8 *local_buf; | ||
342 | int i = 0; | ||
343 | struct fsl_espi_transfer *espi_trans = trans; | ||
344 | |||
345 | local_buf = kzalloc(SPCOM_TRANLEN_MAX, GFP_KERNEL); | ||
346 | if (!local_buf) { | ||
347 | espi_trans->status = -ENOMEM; | ||
348 | return; | ||
349 | } | ||
350 | |||
351 | list_for_each_entry(t, &m->transfers, transfer_list) { | ||
352 | if (t->tx_buf) { | ||
353 | memcpy(local_buf + i, t->tx_buf, t->len); | ||
354 | i += t->len; | ||
355 | } | ||
356 | } | ||
357 | |||
358 | espi_trans->tx_buf = local_buf; | ||
359 | espi_trans->rx_buf = local_buf + espi_trans->n_tx; | ||
360 | fsl_espi_do_trans(m, espi_trans); | ||
361 | |||
362 | espi_trans->actual_length = espi_trans->len; | ||
363 | kfree(local_buf); | ||
364 | } | ||
365 | |||
366 | static void fsl_espi_rw_trans(struct spi_message *m, | ||
367 | struct fsl_espi_transfer *trans, u8 *rx_buff) | ||
368 | { | ||
369 | struct fsl_espi_transfer *espi_trans = trans; | ||
370 | unsigned int n_tx = espi_trans->n_tx; | ||
371 | unsigned int n_rx = espi_trans->n_rx; | ||
372 | struct spi_transfer *t; | ||
373 | u8 *local_buf; | ||
374 | u8 *rx_buf = rx_buff; | ||
375 | unsigned int trans_len; | ||
376 | unsigned int addr; | ||
377 | int i, pos, loop; | ||
378 | |||
379 | local_buf = kzalloc(SPCOM_TRANLEN_MAX, GFP_KERNEL); | ||
380 | if (!local_buf) { | ||
381 | espi_trans->status = -ENOMEM; | ||
382 | return; | ||
383 | } | ||
384 | |||
385 | for (pos = 0, loop = 0; pos < n_rx; pos += trans_len, loop++) { | ||
386 | trans_len = n_rx - pos; | ||
387 | if (trans_len > SPCOM_TRANLEN_MAX - n_tx) | ||
388 | trans_len = SPCOM_TRANLEN_MAX - n_tx; | ||
389 | |||
390 | i = 0; | ||
391 | list_for_each_entry(t, &m->transfers, transfer_list) { | ||
392 | if (t->tx_buf) { | ||
393 | memcpy(local_buf + i, t->tx_buf, t->len); | ||
394 | i += t->len; | ||
395 | } | ||
396 | } | ||
397 | |||
398 | addr = fsl_espi_cmd2addr(local_buf); | ||
399 | addr += pos; | ||
400 | fsl_espi_addr2cmd(addr, local_buf); | ||
401 | |||
402 | espi_trans->n_tx = n_tx; | ||
403 | espi_trans->n_rx = trans_len; | ||
404 | espi_trans->len = trans_len + n_tx; | ||
405 | espi_trans->tx_buf = local_buf; | ||
406 | espi_trans->rx_buf = local_buf + n_tx; | ||
407 | fsl_espi_do_trans(m, espi_trans); | ||
408 | |||
409 | memcpy(rx_buf + pos, espi_trans->rx_buf + n_tx, trans_len); | ||
410 | |||
411 | if (loop > 0) | ||
412 | espi_trans->actual_length += espi_trans->len - n_tx; | ||
413 | else | ||
414 | espi_trans->actual_length += espi_trans->len; | ||
415 | } | ||
416 | |||
417 | kfree(local_buf); | ||
418 | } | ||
419 | |||
420 | static void fsl_espi_do_one_msg(struct spi_message *m) | ||
421 | { | ||
422 | struct spi_transfer *t; | ||
423 | u8 *rx_buf = NULL; | ||
424 | unsigned int n_tx = 0; | ||
425 | unsigned int n_rx = 0; | ||
426 | struct fsl_espi_transfer espi_trans; | ||
427 | |||
428 | list_for_each_entry(t, &m->transfers, transfer_list) { | ||
429 | if (t->tx_buf) | ||
430 | n_tx += t->len; | ||
431 | if (t->rx_buf) { | ||
432 | n_rx += t->len; | ||
433 | rx_buf = t->rx_buf; | ||
434 | } | ||
435 | } | ||
436 | |||
437 | espi_trans.n_tx = n_tx; | ||
438 | espi_trans.n_rx = n_rx; | ||
439 | espi_trans.len = n_tx + n_rx; | ||
440 | espi_trans.actual_length = 0; | ||
441 | espi_trans.status = 0; | ||
442 | |||
443 | if (!rx_buf) | ||
444 | fsl_espi_cmd_trans(m, &espi_trans, NULL); | ||
445 | else | ||
446 | fsl_espi_rw_trans(m, &espi_trans, rx_buf); | ||
447 | |||
448 | m->actual_length = espi_trans.actual_length; | ||
449 | m->status = espi_trans.status; | ||
450 | m->complete(m->context); | ||
451 | } | ||
452 | |||
453 | static int fsl_espi_setup(struct spi_device *spi) | ||
454 | { | ||
455 | struct mpc8xxx_spi *mpc8xxx_spi; | ||
456 | struct fsl_espi_reg *reg_base; | ||
457 | int retval; | ||
458 | u32 hw_mode; | ||
459 | u32 loop_mode; | ||
460 | struct spi_mpc8xxx_cs *cs = spi->controller_state; | ||
461 | |||
462 | if (!spi->max_speed_hz) | ||
463 | return -EINVAL; | ||
464 | |||
465 | if (!cs) { | ||
466 | cs = kzalloc(sizeof *cs, GFP_KERNEL); | ||
467 | if (!cs) | ||
468 | return -ENOMEM; | ||
469 | spi->controller_state = cs; | ||
470 | } | ||
471 | |||
472 | mpc8xxx_spi = spi_master_get_devdata(spi->master); | ||
473 | reg_base = mpc8xxx_spi->reg_base; | ||
474 | |||
475 | hw_mode = cs->hw_mode; /* Save orginal settings */ | ||
476 | cs->hw_mode = mpc8xxx_spi_read_reg( | ||
477 | ®_base->csmode[spi->chip_select]); | ||
478 | /* mask out bits we are going to set */ | ||
479 | cs->hw_mode &= ~(CSMODE_CP_BEGIN_EDGECLK | CSMODE_CI_INACTIVEHIGH | ||
480 | | CSMODE_REV); | ||
481 | |||
482 | if (spi->mode & SPI_CPHA) | ||
483 | cs->hw_mode |= CSMODE_CP_BEGIN_EDGECLK; | ||
484 | if (spi->mode & SPI_CPOL) | ||
485 | cs->hw_mode |= CSMODE_CI_INACTIVEHIGH; | ||
486 | if (!(spi->mode & SPI_LSB_FIRST)) | ||
487 | cs->hw_mode |= CSMODE_REV; | ||
488 | |||
489 | /* Handle the loop mode */ | ||
490 | loop_mode = mpc8xxx_spi_read_reg(®_base->mode); | ||
491 | loop_mode &= ~SPMODE_LOOP; | ||
492 | if (spi->mode & SPI_LOOP) | ||
493 | loop_mode |= SPMODE_LOOP; | ||
494 | mpc8xxx_spi_write_reg(®_base->mode, loop_mode); | ||
495 | |||
496 | retval = fsl_espi_setup_transfer(spi, NULL); | ||
497 | if (retval < 0) { | ||
498 | cs->hw_mode = hw_mode; /* Restore settings */ | ||
499 | return retval; | ||
500 | } | ||
501 | return 0; | ||
502 | } | ||
503 | |||
504 | void fsl_espi_cpu_irq(struct mpc8xxx_spi *mspi, u32 events) | ||
505 | { | ||
506 | struct fsl_espi_reg *reg_base = mspi->reg_base; | ||
507 | |||
508 | /* We need handle RX first */ | ||
509 | if (events & SPIE_NE) { | ||
510 | u32 rx_data; | ||
511 | |||
512 | /* Spin until RX is done */ | ||
513 | while (SPIE_RXCNT(events) < min(4, mspi->len)) { | ||
514 | cpu_relax(); | ||
515 | events = mpc8xxx_spi_read_reg(®_base->event); | ||
516 | } | ||
517 | mspi->len -= 4; | ||
518 | |||
519 | rx_data = mpc8xxx_spi_read_reg(®_base->receive); | ||
520 | |||
521 | if (mspi->rx) | ||
522 | mspi->get_rx(rx_data, mspi); | ||
523 | } | ||
524 | |||
525 | if (!(events & SPIE_NF)) { | ||
526 | int ret; | ||
527 | |||
528 | /* spin until TX is done */ | ||
529 | ret = spin_event_timeout(((events = mpc8xxx_spi_read_reg( | ||
530 | ®_base->event)) & SPIE_NF) == 0, 1000, 0); | ||
531 | if (!ret) { | ||
532 | dev_err(mspi->dev, "tired waiting for SPIE_NF\n"); | ||
533 | return; | ||
534 | } | ||
535 | } | ||
536 | |||
537 | /* Clear the events */ | ||
538 | mpc8xxx_spi_write_reg(®_base->event, events); | ||
539 | |||
540 | mspi->count -= 1; | ||
541 | if (mspi->count) { | ||
542 | u32 word = mspi->get_tx(mspi); | ||
543 | |||
544 | mpc8xxx_spi_write_reg(®_base->transmit, word); | ||
545 | } else { | ||
546 | complete(&mspi->done); | ||
547 | } | ||
548 | } | ||
549 | |||
550 | static irqreturn_t fsl_espi_irq(s32 irq, void *context_data) | ||
551 | { | ||
552 | struct mpc8xxx_spi *mspi = context_data; | ||
553 | struct fsl_espi_reg *reg_base = mspi->reg_base; | ||
554 | irqreturn_t ret = IRQ_NONE; | ||
555 | u32 events; | ||
556 | |||
557 | /* Get interrupt events(tx/rx) */ | ||
558 | events = mpc8xxx_spi_read_reg(®_base->event); | ||
559 | if (events) | ||
560 | ret = IRQ_HANDLED; | ||
561 | |||
562 | dev_vdbg(mspi->dev, "%s: events %x\n", __func__, events); | ||
563 | |||
564 | fsl_espi_cpu_irq(mspi, events); | ||
565 | |||
566 | return ret; | ||
567 | } | ||
568 | |||
569 | static void fsl_espi_remove(struct mpc8xxx_spi *mspi) | ||
570 | { | ||
571 | iounmap(mspi->reg_base); | ||
572 | } | ||
573 | |||
574 | static struct spi_master * __devinit fsl_espi_probe(struct device *dev, | ||
575 | struct resource *mem, unsigned int irq) | ||
576 | { | ||
577 | struct fsl_spi_platform_data *pdata = dev->platform_data; | ||
578 | struct spi_master *master; | ||
579 | struct mpc8xxx_spi *mpc8xxx_spi; | ||
580 | struct fsl_espi_reg *reg_base; | ||
581 | u32 regval; | ||
582 | int i, ret = 0; | ||
583 | |||
584 | master = spi_alloc_master(dev, sizeof(struct mpc8xxx_spi)); | ||
585 | if (!master) { | ||
586 | ret = -ENOMEM; | ||
587 | goto err; | ||
588 | } | ||
589 | |||
590 | dev_set_drvdata(dev, master); | ||
591 | |||
592 | ret = mpc8xxx_spi_probe(dev, mem, irq); | ||
593 | if (ret) | ||
594 | goto err_probe; | ||
595 | |||
596 | master->setup = fsl_espi_setup; | ||
597 | |||
598 | mpc8xxx_spi = spi_master_get_devdata(master); | ||
599 | mpc8xxx_spi->spi_do_one_msg = fsl_espi_do_one_msg; | ||
600 | mpc8xxx_spi->spi_remove = fsl_espi_remove; | ||
601 | |||
602 | mpc8xxx_spi->reg_base = ioremap(mem->start, resource_size(mem)); | ||
603 | if (!mpc8xxx_spi->reg_base) { | ||
604 | ret = -ENOMEM; | ||
605 | goto err_probe; | ||
606 | } | ||
607 | |||
608 | reg_base = mpc8xxx_spi->reg_base; | ||
609 | |||
610 | /* Register for SPI Interrupt */ | ||
611 | ret = request_irq(mpc8xxx_spi->irq, fsl_espi_irq, | ||
612 | 0, "fsl_espi", mpc8xxx_spi); | ||
613 | if (ret) | ||
614 | goto free_irq; | ||
615 | |||
616 | if (mpc8xxx_spi->flags & SPI_QE_CPU_MODE) { | ||
617 | mpc8xxx_spi->rx_shift = 16; | ||
618 | mpc8xxx_spi->tx_shift = 24; | ||
619 | } | ||
620 | |||
621 | /* SPI controller initializations */ | ||
622 | mpc8xxx_spi_write_reg(®_base->mode, 0); | ||
623 | mpc8xxx_spi_write_reg(®_base->mask, 0); | ||
624 | mpc8xxx_spi_write_reg(®_base->command, 0); | ||
625 | mpc8xxx_spi_write_reg(®_base->event, 0xffffffff); | ||
626 | |||
627 | /* Init eSPI CS mode register */ | ||
628 | for (i = 0; i < pdata->max_chipselect; i++) | ||
629 | mpc8xxx_spi_write_reg(®_base->csmode[i], CSMODE_INIT_VAL); | ||
630 | |||
631 | /* Enable SPI interface */ | ||
632 | regval = pdata->initial_spmode | SPMODE_INIT_VAL | SPMODE_ENABLE; | ||
633 | |||
634 | mpc8xxx_spi_write_reg(®_base->mode, regval); | ||
635 | |||
636 | ret = spi_register_master(master); | ||
637 | if (ret < 0) | ||
638 | goto unreg_master; | ||
639 | |||
640 | dev_info(dev, "at 0x%p (irq = %d)\n", reg_base, mpc8xxx_spi->irq); | ||
641 | |||
642 | return master; | ||
643 | |||
644 | unreg_master: | ||
645 | free_irq(mpc8xxx_spi->irq, mpc8xxx_spi); | ||
646 | free_irq: | ||
647 | iounmap(mpc8xxx_spi->reg_base); | ||
648 | err_probe: | ||
649 | spi_master_put(master); | ||
650 | err: | ||
651 | return ERR_PTR(ret); | ||
652 | } | ||
653 | |||
654 | static int of_fsl_espi_get_chipselects(struct device *dev) | ||
655 | { | ||
656 | struct device_node *np = dev->of_node; | ||
657 | struct fsl_spi_platform_data *pdata = dev->platform_data; | ||
658 | const u32 *prop; | ||
659 | int len; | ||
660 | |||
661 | prop = of_get_property(np, "fsl,espi-num-chipselects", &len); | ||
662 | if (!prop || len < sizeof(*prop)) { | ||
663 | dev_err(dev, "No 'fsl,espi-num-chipselects' property\n"); | ||
664 | return -EINVAL; | ||
665 | } | ||
666 | |||
667 | pdata->max_chipselect = *prop; | ||
668 | pdata->cs_control = NULL; | ||
669 | |||
670 | return 0; | ||
671 | } | ||
672 | |||
673 | static int __devinit of_fsl_espi_probe(struct platform_device *ofdev, | ||
674 | const struct of_device_id *ofid) | ||
675 | { | ||
676 | struct device *dev = &ofdev->dev; | ||
677 | struct device_node *np = ofdev->dev.of_node; | ||
678 | struct spi_master *master; | ||
679 | struct resource mem; | ||
680 | struct resource irq; | ||
681 | int ret = -ENOMEM; | ||
682 | |||
683 | ret = of_mpc8xxx_spi_probe(ofdev, ofid); | ||
684 | if (ret) | ||
685 | return ret; | ||
686 | |||
687 | ret = of_fsl_espi_get_chipselects(dev); | ||
688 | if (ret) | ||
689 | goto err; | ||
690 | |||
691 | ret = of_address_to_resource(np, 0, &mem); | ||
692 | if (ret) | ||
693 | goto err; | ||
694 | |||
695 | ret = of_irq_to_resource(np, 0, &irq); | ||
696 | if (!ret) { | ||
697 | ret = -EINVAL; | ||
698 | goto err; | ||
699 | } | ||
700 | |||
701 | master = fsl_espi_probe(dev, &mem, irq.start); | ||
702 | if (IS_ERR(master)) { | ||
703 | ret = PTR_ERR(master); | ||
704 | goto err; | ||
705 | } | ||
706 | |||
707 | return 0; | ||
708 | |||
709 | err: | ||
710 | return ret; | ||
711 | } | ||
712 | |||
713 | static int __devexit of_fsl_espi_remove(struct platform_device *dev) | ||
714 | { | ||
715 | return mpc8xxx_spi_remove(&dev->dev); | ||
716 | } | ||
717 | |||
718 | static const struct of_device_id of_fsl_espi_match[] = { | ||
719 | { .compatible = "fsl,mpc8536-espi" }, | ||
720 | {} | ||
721 | }; | ||
722 | MODULE_DEVICE_TABLE(of, of_fsl_espi_match); | ||
723 | |||
724 | static struct of_platform_driver fsl_espi_driver = { | ||
725 | .driver = { | ||
726 | .name = "fsl_espi", | ||
727 | .owner = THIS_MODULE, | ||
728 | .of_match_table = of_fsl_espi_match, | ||
729 | }, | ||
730 | .probe = of_fsl_espi_probe, | ||
731 | .remove = __devexit_p(of_fsl_espi_remove), | ||
732 | }; | ||
733 | |||
734 | static int __init fsl_espi_init(void) | ||
735 | { | ||
736 | return of_register_platform_driver(&fsl_espi_driver); | ||
737 | } | ||
738 | module_init(fsl_espi_init); | ||
739 | |||
740 | static void __exit fsl_espi_exit(void) | ||
741 | { | ||
742 | of_unregister_platform_driver(&fsl_espi_driver); | ||
743 | } | ||
744 | module_exit(fsl_espi_exit); | ||
745 | |||
746 | MODULE_AUTHOR("Mingkai Hu"); | ||
747 | MODULE_DESCRIPTION("Enhanced Freescale SPI Driver"); | ||
748 | MODULE_LICENSE("GPL"); | ||
diff --git a/drivers/spi/spi_fsl_lib.c b/drivers/spi/spi_fsl_lib.c new file mode 100644 index 000000000000..5cd741fdb5c3 --- /dev/null +++ b/drivers/spi/spi_fsl_lib.c | |||
@@ -0,0 +1,237 @@ | |||
1 | /* | ||
2 | * Freescale SPI/eSPI controller driver library. | ||
3 | * | ||
4 | * Maintainer: Kumar Gala | ||
5 | * | ||
6 | * Copyright (C) 2006 Polycom, Inc. | ||
7 | * | ||
8 | * CPM SPI and QE buffer descriptors mode support: | ||
9 | * Copyright (c) 2009 MontaVista Software, Inc. | ||
10 | * Author: Anton Vorontsov <avorontsov@ru.mvista.com> | ||
11 | * | ||
12 | * Copyright 2010 Freescale Semiconductor, Inc. | ||
13 | * | ||
14 | * This program is free software; you can redistribute it and/or modify it | ||
15 | * under the terms of the GNU General Public License as published by the | ||
16 | * Free Software Foundation; either version 2 of the License, or (at your | ||
17 | * option) any later version. | ||
18 | */ | ||
19 | #include <linux/kernel.h> | ||
20 | #include <linux/interrupt.h> | ||
21 | #include <linux/fsl_devices.h> | ||
22 | #include <linux/dma-mapping.h> | ||
23 | #include <linux/mm.h> | ||
24 | #include <linux/of_platform.h> | ||
25 | #include <linux/of_spi.h> | ||
26 | #include <sysdev/fsl_soc.h> | ||
27 | |||
28 | #include "spi_fsl_lib.h" | ||
29 | |||
30 | #define MPC8XXX_SPI_RX_BUF(type) \ | ||
31 | void mpc8xxx_spi_rx_buf_##type(u32 data, struct mpc8xxx_spi *mpc8xxx_spi) \ | ||
32 | { \ | ||
33 | type *rx = mpc8xxx_spi->rx; \ | ||
34 | *rx++ = (type)(data >> mpc8xxx_spi->rx_shift); \ | ||
35 | mpc8xxx_spi->rx = rx; \ | ||
36 | } | ||
37 | |||
38 | #define MPC8XXX_SPI_TX_BUF(type) \ | ||
39 | u32 mpc8xxx_spi_tx_buf_##type(struct mpc8xxx_spi *mpc8xxx_spi) \ | ||
40 | { \ | ||
41 | u32 data; \ | ||
42 | const type *tx = mpc8xxx_spi->tx; \ | ||
43 | if (!tx) \ | ||
44 | return 0; \ | ||
45 | data = *tx++ << mpc8xxx_spi->tx_shift; \ | ||
46 | mpc8xxx_spi->tx = tx; \ | ||
47 | return data; \ | ||
48 | } | ||
49 | |||
50 | MPC8XXX_SPI_RX_BUF(u8) | ||
51 | MPC8XXX_SPI_RX_BUF(u16) | ||
52 | MPC8XXX_SPI_RX_BUF(u32) | ||
53 | MPC8XXX_SPI_TX_BUF(u8) | ||
54 | MPC8XXX_SPI_TX_BUF(u16) | ||
55 | MPC8XXX_SPI_TX_BUF(u32) | ||
56 | |||
57 | struct mpc8xxx_spi_probe_info *to_of_pinfo(struct fsl_spi_platform_data *pdata) | ||
58 | { | ||
59 | return container_of(pdata, struct mpc8xxx_spi_probe_info, pdata); | ||
60 | } | ||
61 | |||
62 | void mpc8xxx_spi_work(struct work_struct *work) | ||
63 | { | ||
64 | struct mpc8xxx_spi *mpc8xxx_spi = container_of(work, struct mpc8xxx_spi, | ||
65 | work); | ||
66 | |||
67 | spin_lock_irq(&mpc8xxx_spi->lock); | ||
68 | while (!list_empty(&mpc8xxx_spi->queue)) { | ||
69 | struct spi_message *m = container_of(mpc8xxx_spi->queue.next, | ||
70 | struct spi_message, queue); | ||
71 | |||
72 | list_del_init(&m->queue); | ||
73 | spin_unlock_irq(&mpc8xxx_spi->lock); | ||
74 | |||
75 | if (mpc8xxx_spi->spi_do_one_msg) | ||
76 | mpc8xxx_spi->spi_do_one_msg(m); | ||
77 | |||
78 | spin_lock_irq(&mpc8xxx_spi->lock); | ||
79 | } | ||
80 | spin_unlock_irq(&mpc8xxx_spi->lock); | ||
81 | } | ||
82 | |||
83 | int mpc8xxx_spi_transfer(struct spi_device *spi, | ||
84 | struct spi_message *m) | ||
85 | { | ||
86 | struct mpc8xxx_spi *mpc8xxx_spi = spi_master_get_devdata(spi->master); | ||
87 | unsigned long flags; | ||
88 | |||
89 | m->actual_length = 0; | ||
90 | m->status = -EINPROGRESS; | ||
91 | |||
92 | spin_lock_irqsave(&mpc8xxx_spi->lock, flags); | ||
93 | list_add_tail(&m->queue, &mpc8xxx_spi->queue); | ||
94 | queue_work(mpc8xxx_spi->workqueue, &mpc8xxx_spi->work); | ||
95 | spin_unlock_irqrestore(&mpc8xxx_spi->lock, flags); | ||
96 | |||
97 | return 0; | ||
98 | } | ||
99 | |||
100 | void mpc8xxx_spi_cleanup(struct spi_device *spi) | ||
101 | { | ||
102 | kfree(spi->controller_state); | ||
103 | } | ||
104 | |||
105 | const char *mpc8xxx_spi_strmode(unsigned int flags) | ||
106 | { | ||
107 | if (flags & SPI_QE_CPU_MODE) { | ||
108 | return "QE CPU"; | ||
109 | } else if (flags & SPI_CPM_MODE) { | ||
110 | if (flags & SPI_QE) | ||
111 | return "QE"; | ||
112 | else if (flags & SPI_CPM2) | ||
113 | return "CPM2"; | ||
114 | else | ||
115 | return "CPM1"; | ||
116 | } | ||
117 | return "CPU"; | ||
118 | } | ||
119 | |||
120 | int mpc8xxx_spi_probe(struct device *dev, struct resource *mem, | ||
121 | unsigned int irq) | ||
122 | { | ||
123 | struct fsl_spi_platform_data *pdata = dev->platform_data; | ||
124 | struct spi_master *master; | ||
125 | struct mpc8xxx_spi *mpc8xxx_spi; | ||
126 | int ret = 0; | ||
127 | |||
128 | master = dev_get_drvdata(dev); | ||
129 | |||
130 | /* the spi->mode bits understood by this driver: */ | ||
131 | master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | ||
132 | | SPI_LSB_FIRST | SPI_LOOP; | ||
133 | |||
134 | master->transfer = mpc8xxx_spi_transfer; | ||
135 | master->cleanup = mpc8xxx_spi_cleanup; | ||
136 | master->dev.of_node = dev->of_node; | ||
137 | |||
138 | mpc8xxx_spi = spi_master_get_devdata(master); | ||
139 | mpc8xxx_spi->dev = dev; | ||
140 | mpc8xxx_spi->get_rx = mpc8xxx_spi_rx_buf_u8; | ||
141 | mpc8xxx_spi->get_tx = mpc8xxx_spi_tx_buf_u8; | ||
142 | mpc8xxx_spi->flags = pdata->flags; | ||
143 | mpc8xxx_spi->spibrg = pdata->sysclk; | ||
144 | mpc8xxx_spi->irq = irq; | ||
145 | |||
146 | mpc8xxx_spi->rx_shift = 0; | ||
147 | mpc8xxx_spi->tx_shift = 0; | ||
148 | |||
149 | init_completion(&mpc8xxx_spi->done); | ||
150 | |||
151 | master->bus_num = pdata->bus_num; | ||
152 | master->num_chipselect = pdata->max_chipselect; | ||
153 | |||
154 | spin_lock_init(&mpc8xxx_spi->lock); | ||
155 | init_completion(&mpc8xxx_spi->done); | ||
156 | INIT_WORK(&mpc8xxx_spi->work, mpc8xxx_spi_work); | ||
157 | INIT_LIST_HEAD(&mpc8xxx_spi->queue); | ||
158 | |||
159 | mpc8xxx_spi->workqueue = create_singlethread_workqueue( | ||
160 | dev_name(master->dev.parent)); | ||
161 | if (mpc8xxx_spi->workqueue == NULL) { | ||
162 | ret = -EBUSY; | ||
163 | goto err; | ||
164 | } | ||
165 | |||
166 | return 0; | ||
167 | |||
168 | err: | ||
169 | return ret; | ||
170 | } | ||
171 | |||
172 | int __devexit mpc8xxx_spi_remove(struct device *dev) | ||
173 | { | ||
174 | struct mpc8xxx_spi *mpc8xxx_spi; | ||
175 | struct spi_master *master; | ||
176 | |||
177 | master = dev_get_drvdata(dev); | ||
178 | mpc8xxx_spi = spi_master_get_devdata(master); | ||
179 | |||
180 | flush_workqueue(mpc8xxx_spi->workqueue); | ||
181 | destroy_workqueue(mpc8xxx_spi->workqueue); | ||
182 | spi_unregister_master(master); | ||
183 | |||
184 | free_irq(mpc8xxx_spi->irq, mpc8xxx_spi); | ||
185 | |||
186 | if (mpc8xxx_spi->spi_remove) | ||
187 | mpc8xxx_spi->spi_remove(mpc8xxx_spi); | ||
188 | |||
189 | return 0; | ||
190 | } | ||
191 | |||
192 | int __devinit of_mpc8xxx_spi_probe(struct platform_device *ofdev, | ||
193 | const struct of_device_id *ofid) | ||
194 | { | ||
195 | struct device *dev = &ofdev->dev; | ||
196 | struct device_node *np = ofdev->dev.of_node; | ||
197 | struct mpc8xxx_spi_probe_info *pinfo; | ||
198 | struct fsl_spi_platform_data *pdata; | ||
199 | const void *prop; | ||
200 | int ret = -ENOMEM; | ||
201 | |||
202 | pinfo = kzalloc(sizeof(*pinfo), GFP_KERNEL); | ||
203 | if (!pinfo) | ||
204 | return -ENOMEM; | ||
205 | |||
206 | pdata = &pinfo->pdata; | ||
207 | dev->platform_data = pdata; | ||
208 | |||
209 | /* Allocate bus num dynamically. */ | ||
210 | pdata->bus_num = -1; | ||
211 | |||
212 | /* SPI controller is either clocked from QE or SoC clock. */ | ||
213 | pdata->sysclk = get_brgfreq(); | ||
214 | if (pdata->sysclk == -1) { | ||
215 | pdata->sysclk = fsl_get_sys_freq(); | ||
216 | if (pdata->sysclk == -1) { | ||
217 | ret = -ENODEV; | ||
218 | goto err; | ||
219 | } | ||
220 | } | ||
221 | |||
222 | prop = of_get_property(np, "mode", NULL); | ||
223 | if (prop && !strcmp(prop, "cpu-qe")) | ||
224 | pdata->flags = SPI_QE_CPU_MODE; | ||
225 | else if (prop && !strcmp(prop, "qe")) | ||
226 | pdata->flags = SPI_CPM_MODE | SPI_QE; | ||
227 | else if (of_device_is_compatible(np, "fsl,cpm2-spi")) | ||
228 | pdata->flags = SPI_CPM_MODE | SPI_CPM2; | ||
229 | else if (of_device_is_compatible(np, "fsl,cpm1-spi")) | ||
230 | pdata->flags = SPI_CPM_MODE | SPI_CPM1; | ||
231 | |||
232 | return 0; | ||
233 | |||
234 | err: | ||
235 | kfree(pinfo); | ||
236 | return ret; | ||
237 | } | ||
diff --git a/drivers/spi/spi_fsl_lib.h b/drivers/spi/spi_fsl_lib.h new file mode 100644 index 000000000000..281e060977cd --- /dev/null +++ b/drivers/spi/spi_fsl_lib.h | |||
@@ -0,0 +1,124 @@ | |||
1 | /* | ||
2 | * Freescale SPI/eSPI controller driver library. | ||
3 | * | ||
4 | * Maintainer: Kumar Gala | ||
5 | * | ||
6 | * Copyright 2010 Freescale Semiconductor, Inc. | ||
7 | * Copyright (C) 2006 Polycom, Inc. | ||
8 | * | ||
9 | * CPM SPI and QE buffer descriptors mode support: | ||
10 | * Copyright (c) 2009 MontaVista Software, Inc. | ||
11 | * Author: Anton Vorontsov <avorontsov@ru.mvista.com> | ||
12 | * | ||
13 | * This program is free software; you can redistribute it and/or modify it | ||
14 | * under the terms of the GNU General Public License as published by the | ||
15 | * Free Software Foundation; either version 2 of the License, or (at your | ||
16 | * option) any later version. | ||
17 | */ | ||
18 | #ifndef __SPI_FSL_LIB_H__ | ||
19 | #define __SPI_FSL_LIB_H__ | ||
20 | |||
21 | #include <asm/io.h> | ||
22 | |||
23 | /* SPI/eSPI Controller driver's private data. */ | ||
24 | struct mpc8xxx_spi { | ||
25 | struct device *dev; | ||
26 | void *reg_base; | ||
27 | |||
28 | /* rx & tx bufs from the spi_transfer */ | ||
29 | const void *tx; | ||
30 | void *rx; | ||
31 | #ifdef CONFIG_SPI_FSL_ESPI | ||
32 | int len; | ||
33 | #endif | ||
34 | |||
35 | int subblock; | ||
36 | struct spi_pram __iomem *pram; | ||
37 | struct cpm_buf_desc __iomem *tx_bd; | ||
38 | struct cpm_buf_desc __iomem *rx_bd; | ||
39 | |||
40 | struct spi_transfer *xfer_in_progress; | ||
41 | |||
42 | /* dma addresses for CPM transfers */ | ||
43 | dma_addr_t tx_dma; | ||
44 | dma_addr_t rx_dma; | ||
45 | bool map_tx_dma; | ||
46 | bool map_rx_dma; | ||
47 | |||
48 | dma_addr_t dma_dummy_tx; | ||
49 | dma_addr_t dma_dummy_rx; | ||
50 | |||
51 | /* functions to deal with different sized buffers */ | ||
52 | void (*get_rx) (u32 rx_data, struct mpc8xxx_spi *); | ||
53 | u32(*get_tx) (struct mpc8xxx_spi *); | ||
54 | |||
55 | /* hooks for different controller driver */ | ||
56 | void (*spi_do_one_msg) (struct spi_message *m); | ||
57 | void (*spi_remove) (struct mpc8xxx_spi *mspi); | ||
58 | |||
59 | unsigned int count; | ||
60 | unsigned int irq; | ||
61 | |||
62 | unsigned nsecs; /* (clock cycle time)/2 */ | ||
63 | |||
64 | u32 spibrg; /* SPIBRG input clock */ | ||
65 | u32 rx_shift; /* RX data reg shift when in qe mode */ | ||
66 | u32 tx_shift; /* TX data reg shift when in qe mode */ | ||
67 | |||
68 | unsigned int flags; | ||
69 | |||
70 | struct workqueue_struct *workqueue; | ||
71 | struct work_struct work; | ||
72 | |||
73 | struct list_head queue; | ||
74 | spinlock_t lock; | ||
75 | |||
76 | struct completion done; | ||
77 | }; | ||
78 | |||
79 | struct spi_mpc8xxx_cs { | ||
80 | /* functions to deal with different sized buffers */ | ||
81 | void (*get_rx) (u32 rx_data, struct mpc8xxx_spi *); | ||
82 | u32 (*get_tx) (struct mpc8xxx_spi *); | ||
83 | u32 rx_shift; /* RX data reg shift when in qe mode */ | ||
84 | u32 tx_shift; /* TX data reg shift when in qe mode */ | ||
85 | u32 hw_mode; /* Holds HW mode register settings */ | ||
86 | }; | ||
87 | |||
88 | static inline void mpc8xxx_spi_write_reg(__be32 __iomem *reg, u32 val) | ||
89 | { | ||
90 | out_be32(reg, val); | ||
91 | } | ||
92 | |||
93 | static inline u32 mpc8xxx_spi_read_reg(__be32 __iomem *reg) | ||
94 | { | ||
95 | return in_be32(reg); | ||
96 | } | ||
97 | |||
98 | struct mpc8xxx_spi_probe_info { | ||
99 | struct fsl_spi_platform_data pdata; | ||
100 | int *gpios; | ||
101 | bool *alow_flags; | ||
102 | }; | ||
103 | |||
104 | extern u32 mpc8xxx_spi_tx_buf_u8(struct mpc8xxx_spi *mpc8xxx_spi); | ||
105 | extern u32 mpc8xxx_spi_tx_buf_u16(struct mpc8xxx_spi *mpc8xxx_spi); | ||
106 | extern u32 mpc8xxx_spi_tx_buf_u32(struct mpc8xxx_spi *mpc8xxx_spi); | ||
107 | extern void mpc8xxx_spi_rx_buf_u8(u32 data, struct mpc8xxx_spi *mpc8xxx_spi); | ||
108 | extern void mpc8xxx_spi_rx_buf_u16(u32 data, struct mpc8xxx_spi *mpc8xxx_spi); | ||
109 | extern void mpc8xxx_spi_rx_buf_u32(u32 data, struct mpc8xxx_spi *mpc8xxx_spi); | ||
110 | |||
111 | extern struct mpc8xxx_spi_probe_info *to_of_pinfo( | ||
112 | struct fsl_spi_platform_data *pdata); | ||
113 | extern int mpc8xxx_spi_bufs(struct mpc8xxx_spi *mspi, | ||
114 | struct spi_transfer *t, unsigned int len); | ||
115 | extern int mpc8xxx_spi_transfer(struct spi_device *spi, struct spi_message *m); | ||
116 | extern void mpc8xxx_spi_cleanup(struct spi_device *spi); | ||
117 | extern const char *mpc8xxx_spi_strmode(unsigned int flags); | ||
118 | extern int mpc8xxx_spi_probe(struct device *dev, struct resource *mem, | ||
119 | unsigned int irq); | ||
120 | extern int mpc8xxx_spi_remove(struct device *dev); | ||
121 | extern int of_mpc8xxx_spi_probe(struct platform_device *ofdev, | ||
122 | const struct of_device_id *ofid); | ||
123 | |||
124 | #endif /* __SPI_FSL_LIB_H__ */ | ||
diff --git a/drivers/spi/spi_mpc8xxx.c b/drivers/spi/spi_fsl_spi.c index 1dd86b835cd8..7ca52d3ae8f8 100644 --- a/drivers/spi/spi_mpc8xxx.c +++ b/drivers/spi/spi_fsl_spi.c | |||
@@ -1,9 +1,10 @@ | |||
1 | /* | 1 | /* |
2 | * MPC8xxx SPI controller driver. | 2 | * Freescale SPI controller driver. |
3 | * | 3 | * |
4 | * Maintainer: Kumar Gala | 4 | * Maintainer: Kumar Gala |
5 | * | 5 | * |
6 | * Copyright (C) 2006 Polycom, Inc. | 6 | * Copyright (C) 2006 Polycom, Inc. |
7 | * Copyright 2010 Freescale Semiconductor, Inc. | ||
7 | * | 8 | * |
8 | * CPM SPI and QE buffer descriptors mode support: | 9 | * CPM SPI and QE buffer descriptors mode support: |
9 | * Copyright (c) 2009 MontaVista Software, Inc. | 10 | * Copyright (c) 2009 MontaVista Software, Inc. |
@@ -15,18 +16,11 @@ | |||
15 | * option) any later version. | 16 | * option) any later version. |
16 | */ | 17 | */ |
17 | #include <linux/module.h> | 18 | #include <linux/module.h> |
18 | #include <linux/init.h> | ||
19 | #include <linux/types.h> | 19 | #include <linux/types.h> |
20 | #include <linux/kernel.h> | 20 | #include <linux/kernel.h> |
21 | #include <linux/bug.h> | ||
22 | #include <linux/errno.h> | ||
23 | #include <linux/err.h> | ||
24 | #include <linux/io.h> | ||
25 | #include <linux/completion.h> | ||
26 | #include <linux/interrupt.h> | 21 | #include <linux/interrupt.h> |
27 | #include <linux/delay.h> | 22 | #include <linux/delay.h> |
28 | #include <linux/irq.h> | 23 | #include <linux/irq.h> |
29 | #include <linux/device.h> | ||
30 | #include <linux/spi/spi.h> | 24 | #include <linux/spi/spi.h> |
31 | #include <linux/spi/spi_bitbang.h> | 25 | #include <linux/spi/spi_bitbang.h> |
32 | #include <linux/platform_device.h> | 26 | #include <linux/platform_device.h> |
@@ -38,12 +32,12 @@ | |||
38 | #include <linux/of_platform.h> | 32 | #include <linux/of_platform.h> |
39 | #include <linux/gpio.h> | 33 | #include <linux/gpio.h> |
40 | #include <linux/of_gpio.h> | 34 | #include <linux/of_gpio.h> |
41 | #include <linux/slab.h> | ||
42 | 35 | ||
43 | #include <sysdev/fsl_soc.h> | 36 | #include <sysdev/fsl_soc.h> |
44 | #include <asm/cpm.h> | 37 | #include <asm/cpm.h> |
45 | #include <asm/qe.h> | 38 | #include <asm/qe.h> |
46 | #include <asm/irq.h> | 39 | |
40 | #include "spi_fsl_lib.h" | ||
47 | 41 | ||
48 | /* CPM1 and CPM2 are mutually exclusive. */ | 42 | /* CPM1 and CPM2 are mutually exclusive. */ |
49 | #ifdef CONFIG_CPM1 | 43 | #ifdef CONFIG_CPM1 |
@@ -55,7 +49,7 @@ | |||
55 | #endif | 49 | #endif |
56 | 50 | ||
57 | /* SPI Controller registers */ | 51 | /* SPI Controller registers */ |
58 | struct mpc8xxx_spi_reg { | 52 | struct fsl_spi_reg { |
59 | u8 res1[0x20]; | 53 | u8 res1[0x20]; |
60 | __be32 mode; | 54 | __be32 mode; |
61 | __be32 event; | 55 | __be32 event; |
@@ -80,7 +74,7 @@ struct mpc8xxx_spi_reg { | |||
80 | 74 | ||
81 | /* | 75 | /* |
82 | * Default for SPI Mode: | 76 | * Default for SPI Mode: |
83 | * SPI MODE 0 (inactive low, phase middle, MSB, 8-bit length, slow clk | 77 | * SPI MODE 0 (inactive low, phase middle, MSB, 8-bit length, slow clk |
84 | */ | 78 | */ |
85 | #define SPMODE_INIT_VAL (SPMODE_CI_INACTIVEHIGH | SPMODE_DIV16 | SPMODE_REV | \ | 79 | #define SPMODE_INIT_VAL (SPMODE_CI_INACTIVEHIGH | SPMODE_DIV16 | SPMODE_REV | \ |
86 | SPMODE_MS | SPMODE_LEN(7) | SPMODE_PM(0xf)) | 80 | SPMODE_MS | SPMODE_LEN(7) | SPMODE_PM(0xf)) |
@@ -102,112 +96,16 @@ struct mpc8xxx_spi_reg { | |||
102 | #define SPI_PRAM_SIZE 0x100 | 96 | #define SPI_PRAM_SIZE 0x100 |
103 | #define SPI_MRBLR ((unsigned int)PAGE_SIZE) | 97 | #define SPI_MRBLR ((unsigned int)PAGE_SIZE) |
104 | 98 | ||
105 | /* SPI Controller driver's private data. */ | 99 | static void *fsl_dummy_rx; |
106 | struct mpc8xxx_spi { | 100 | static DEFINE_MUTEX(fsl_dummy_rx_lock); |
107 | struct device *dev; | 101 | static int fsl_dummy_rx_refcnt; |
108 | struct mpc8xxx_spi_reg __iomem *base; | ||
109 | |||
110 | /* rx & tx bufs from the spi_transfer */ | ||
111 | const void *tx; | ||
112 | void *rx; | ||
113 | |||
114 | int subblock; | ||
115 | struct spi_pram __iomem *pram; | ||
116 | struct cpm_buf_desc __iomem *tx_bd; | ||
117 | struct cpm_buf_desc __iomem *rx_bd; | ||
118 | |||
119 | struct spi_transfer *xfer_in_progress; | ||
120 | |||
121 | /* dma addresses for CPM transfers */ | ||
122 | dma_addr_t tx_dma; | ||
123 | dma_addr_t rx_dma; | ||
124 | bool map_tx_dma; | ||
125 | bool map_rx_dma; | ||
126 | |||
127 | dma_addr_t dma_dummy_tx; | ||
128 | dma_addr_t dma_dummy_rx; | ||
129 | |||
130 | /* functions to deal with different sized buffers */ | ||
131 | void (*get_rx) (u32 rx_data, struct mpc8xxx_spi *); | ||
132 | u32(*get_tx) (struct mpc8xxx_spi *); | ||
133 | |||
134 | unsigned int count; | ||
135 | unsigned int irq; | ||
136 | |||
137 | unsigned nsecs; /* (clock cycle time)/2 */ | ||
138 | |||
139 | u32 spibrg; /* SPIBRG input clock */ | ||
140 | u32 rx_shift; /* RX data reg shift when in qe mode */ | ||
141 | u32 tx_shift; /* TX data reg shift when in qe mode */ | ||
142 | |||
143 | unsigned int flags; | ||
144 | |||
145 | struct workqueue_struct *workqueue; | ||
146 | struct work_struct work; | ||
147 | |||
148 | struct list_head queue; | ||
149 | spinlock_t lock; | ||
150 | |||
151 | struct completion done; | ||
152 | }; | ||
153 | |||
154 | static void *mpc8xxx_dummy_rx; | ||
155 | static DEFINE_MUTEX(mpc8xxx_dummy_rx_lock); | ||
156 | static int mpc8xxx_dummy_rx_refcnt; | ||
157 | |||
158 | struct spi_mpc8xxx_cs { | ||
159 | /* functions to deal with different sized buffers */ | ||
160 | void (*get_rx) (u32 rx_data, struct mpc8xxx_spi *); | ||
161 | u32 (*get_tx) (struct mpc8xxx_spi *); | ||
162 | u32 rx_shift; /* RX data reg shift when in qe mode */ | ||
163 | u32 tx_shift; /* TX data reg shift when in qe mode */ | ||
164 | u32 hw_mode; /* Holds HW mode register settings */ | ||
165 | }; | ||
166 | |||
167 | static inline void mpc8xxx_spi_write_reg(__be32 __iomem *reg, u32 val) | ||
168 | { | ||
169 | out_be32(reg, val); | ||
170 | } | ||
171 | |||
172 | static inline u32 mpc8xxx_spi_read_reg(__be32 __iomem *reg) | ||
173 | { | ||
174 | return in_be32(reg); | ||
175 | } | ||
176 | |||
177 | #define MPC83XX_SPI_RX_BUF(type) \ | ||
178 | static \ | ||
179 | void mpc8xxx_spi_rx_buf_##type(u32 data, struct mpc8xxx_spi *mpc8xxx_spi) \ | ||
180 | { \ | ||
181 | type *rx = mpc8xxx_spi->rx; \ | ||
182 | *rx++ = (type)(data >> mpc8xxx_spi->rx_shift); \ | ||
183 | mpc8xxx_spi->rx = rx; \ | ||
184 | } | ||
185 | |||
186 | #define MPC83XX_SPI_TX_BUF(type) \ | ||
187 | static \ | ||
188 | u32 mpc8xxx_spi_tx_buf_##type(struct mpc8xxx_spi *mpc8xxx_spi) \ | ||
189 | { \ | ||
190 | u32 data; \ | ||
191 | const type *tx = mpc8xxx_spi->tx; \ | ||
192 | if (!tx) \ | ||
193 | return 0; \ | ||
194 | data = *tx++ << mpc8xxx_spi->tx_shift; \ | ||
195 | mpc8xxx_spi->tx = tx; \ | ||
196 | return data; \ | ||
197 | } | ||
198 | 102 | ||
199 | MPC83XX_SPI_RX_BUF(u8) | 103 | static void fsl_spi_change_mode(struct spi_device *spi) |
200 | MPC83XX_SPI_RX_BUF(u16) | ||
201 | MPC83XX_SPI_RX_BUF(u32) | ||
202 | MPC83XX_SPI_TX_BUF(u8) | ||
203 | MPC83XX_SPI_TX_BUF(u16) | ||
204 | MPC83XX_SPI_TX_BUF(u32) | ||
205 | |||
206 | static void mpc8xxx_spi_change_mode(struct spi_device *spi) | ||
207 | { | 104 | { |
208 | struct mpc8xxx_spi *mspi = spi_master_get_devdata(spi->master); | 105 | struct mpc8xxx_spi *mspi = spi_master_get_devdata(spi->master); |
209 | struct spi_mpc8xxx_cs *cs = spi->controller_state; | 106 | struct spi_mpc8xxx_cs *cs = spi->controller_state; |
210 | __be32 __iomem *mode = &mspi->base->mode; | 107 | struct fsl_spi_reg *reg_base = mspi->reg_base; |
108 | __be32 __iomem *mode = ®_base->mode; | ||
211 | unsigned long flags; | 109 | unsigned long flags; |
212 | 110 | ||
213 | if (cs->hw_mode == mpc8xxx_spi_read_reg(mode)) | 111 | if (cs->hw_mode == mpc8xxx_spi_read_reg(mode)) |
@@ -238,7 +136,7 @@ static void mpc8xxx_spi_change_mode(struct spi_device *spi) | |||
238 | local_irq_restore(flags); | 136 | local_irq_restore(flags); |
239 | } | 137 | } |
240 | 138 | ||
241 | static void mpc8xxx_spi_chipselect(struct spi_device *spi, int value) | 139 | static void fsl_spi_chipselect(struct spi_device *spi, int value) |
242 | { | 140 | { |
243 | struct mpc8xxx_spi *mpc8xxx_spi = spi_master_get_devdata(spi->master); | 141 | struct mpc8xxx_spi *mpc8xxx_spi = spi_master_get_devdata(spi->master); |
244 | struct fsl_spi_platform_data *pdata = spi->dev.parent->platform_data; | 142 | struct fsl_spi_platform_data *pdata = spi->dev.parent->platform_data; |
@@ -256,18 +154,17 @@ static void mpc8xxx_spi_chipselect(struct spi_device *spi, int value) | |||
256 | mpc8xxx_spi->get_rx = cs->get_rx; | 154 | mpc8xxx_spi->get_rx = cs->get_rx; |
257 | mpc8xxx_spi->get_tx = cs->get_tx; | 155 | mpc8xxx_spi->get_tx = cs->get_tx; |
258 | 156 | ||
259 | mpc8xxx_spi_change_mode(spi); | 157 | fsl_spi_change_mode(spi); |
260 | 158 | ||
261 | if (pdata->cs_control) | 159 | if (pdata->cs_control) |
262 | pdata->cs_control(spi, pol); | 160 | pdata->cs_control(spi, pol); |
263 | } | 161 | } |
264 | } | 162 | } |
265 | 163 | ||
266 | static int | 164 | static int mspi_apply_cpu_mode_quirks(struct spi_mpc8xxx_cs *cs, |
267 | mspi_apply_cpu_mode_quirks(struct spi_mpc8xxx_cs *cs, | 165 | struct spi_device *spi, |
268 | struct spi_device *spi, | 166 | struct mpc8xxx_spi *mpc8xxx_spi, |
269 | struct mpc8xxx_spi *mpc8xxx_spi, | 167 | int bits_per_word) |
270 | int bits_per_word) | ||
271 | { | 168 | { |
272 | cs->rx_shift = 0; | 169 | cs->rx_shift = 0; |
273 | cs->tx_shift = 0; | 170 | cs->tx_shift = 0; |
@@ -307,10 +204,9 @@ mspi_apply_cpu_mode_quirks(struct spi_mpc8xxx_cs *cs, | |||
307 | return bits_per_word; | 204 | return bits_per_word; |
308 | } | 205 | } |
309 | 206 | ||
310 | static int | 207 | static int mspi_apply_qe_mode_quirks(struct spi_mpc8xxx_cs *cs, |
311 | mspi_apply_qe_mode_quirks(struct spi_mpc8xxx_cs *cs, | 208 | struct spi_device *spi, |
312 | struct spi_device *spi, | 209 | int bits_per_word) |
313 | int bits_per_word) | ||
314 | { | 210 | { |
315 | /* QE uses Little Endian for words > 8 | 211 | /* QE uses Little Endian for words > 8 |
316 | * so transform all words > 8 into 8 bits | 212 | * so transform all words > 8 into 8 bits |
@@ -326,13 +222,13 @@ mspi_apply_qe_mode_quirks(struct spi_mpc8xxx_cs *cs, | |||
326 | return bits_per_word; | 222 | return bits_per_word; |
327 | } | 223 | } |
328 | 224 | ||
329 | static | 225 | static int fsl_spi_setup_transfer(struct spi_device *spi, |
330 | int mpc8xxx_spi_setup_transfer(struct spi_device *spi, struct spi_transfer *t) | 226 | struct spi_transfer *t) |
331 | { | 227 | { |
332 | struct mpc8xxx_spi *mpc8xxx_spi; | 228 | struct mpc8xxx_spi *mpc8xxx_spi; |
333 | int bits_per_word; | 229 | int bits_per_word = 0; |
334 | u8 pm; | 230 | u8 pm; |
335 | u32 hz; | 231 | u32 hz = 0; |
336 | struct spi_mpc8xxx_cs *cs = spi->controller_state; | 232 | struct spi_mpc8xxx_cs *cs = spi->controller_state; |
337 | 233 | ||
338 | mpc8xxx_spi = spi_master_get_devdata(spi->master); | 234 | mpc8xxx_spi = spi_master_get_devdata(spi->master); |
@@ -340,9 +236,6 @@ int mpc8xxx_spi_setup_transfer(struct spi_device *spi, struct spi_transfer *t) | |||
340 | if (t) { | 236 | if (t) { |
341 | bits_per_word = t->bits_per_word; | 237 | bits_per_word = t->bits_per_word; |
342 | hz = t->speed_hz; | 238 | hz = t->speed_hz; |
343 | } else { | ||
344 | bits_per_word = 0; | ||
345 | hz = 0; | ||
346 | } | 239 | } |
347 | 240 | ||
348 | /* spi_transfer level calls that work per-word */ | 241 | /* spi_transfer level calls that work per-word */ |
@@ -388,23 +281,25 @@ int mpc8xxx_spi_setup_transfer(struct spi_device *spi, struct spi_transfer *t) | |||
388 | hz, mpc8xxx_spi->spibrg / 1024); | 281 | hz, mpc8xxx_spi->spibrg / 1024); |
389 | if (pm > 16) | 282 | if (pm > 16) |
390 | pm = 16; | 283 | pm = 16; |
391 | } else | 284 | } else { |
392 | pm = (mpc8xxx_spi->spibrg - 1) / (hz * 4) + 1; | 285 | pm = (mpc8xxx_spi->spibrg - 1) / (hz * 4) + 1; |
286 | } | ||
393 | if (pm) | 287 | if (pm) |
394 | pm--; | 288 | pm--; |
395 | 289 | ||
396 | cs->hw_mode |= SPMODE_PM(pm); | 290 | cs->hw_mode |= SPMODE_PM(pm); |
397 | 291 | ||
398 | mpc8xxx_spi_change_mode(spi); | 292 | fsl_spi_change_mode(spi); |
399 | return 0; | 293 | return 0; |
400 | } | 294 | } |
401 | 295 | ||
402 | static void mpc8xxx_spi_cpm_bufs_start(struct mpc8xxx_spi *mspi) | 296 | static void fsl_spi_cpm_bufs_start(struct mpc8xxx_spi *mspi) |
403 | { | 297 | { |
404 | struct cpm_buf_desc __iomem *tx_bd = mspi->tx_bd; | 298 | struct cpm_buf_desc __iomem *tx_bd = mspi->tx_bd; |
405 | struct cpm_buf_desc __iomem *rx_bd = mspi->rx_bd; | 299 | struct cpm_buf_desc __iomem *rx_bd = mspi->rx_bd; |
406 | unsigned int xfer_len = min(mspi->count, SPI_MRBLR); | 300 | unsigned int xfer_len = min(mspi->count, SPI_MRBLR); |
407 | unsigned int xfer_ofs; | 301 | unsigned int xfer_ofs; |
302 | struct fsl_spi_reg *reg_base = mspi->reg_base; | ||
408 | 303 | ||
409 | xfer_ofs = mspi->xfer_in_progress->len - mspi->count; | 304 | xfer_ofs = mspi->xfer_in_progress->len - mspi->count; |
410 | 305 | ||
@@ -424,13 +319,14 @@ static void mpc8xxx_spi_cpm_bufs_start(struct mpc8xxx_spi *mspi) | |||
424 | BD_SC_LAST); | 319 | BD_SC_LAST); |
425 | 320 | ||
426 | /* start transfer */ | 321 | /* start transfer */ |
427 | mpc8xxx_spi_write_reg(&mspi->base->command, SPCOM_STR); | 322 | mpc8xxx_spi_write_reg(®_base->command, SPCOM_STR); |
428 | } | 323 | } |
429 | 324 | ||
430 | static int mpc8xxx_spi_cpm_bufs(struct mpc8xxx_spi *mspi, | 325 | static int fsl_spi_cpm_bufs(struct mpc8xxx_spi *mspi, |
431 | struct spi_transfer *t, bool is_dma_mapped) | 326 | struct spi_transfer *t, bool is_dma_mapped) |
432 | { | 327 | { |
433 | struct device *dev = mspi->dev; | 328 | struct device *dev = mspi->dev; |
329 | struct fsl_spi_reg *reg_base = mspi->reg_base; | ||
434 | 330 | ||
435 | if (is_dma_mapped) { | 331 | if (is_dma_mapped) { |
436 | mspi->map_tx_dma = 0; | 332 | mspi->map_tx_dma = 0; |
@@ -475,13 +371,13 @@ static int mpc8xxx_spi_cpm_bufs(struct mpc8xxx_spi *mspi, | |||
475 | } | 371 | } |
476 | 372 | ||
477 | /* enable rx ints */ | 373 | /* enable rx ints */ |
478 | mpc8xxx_spi_write_reg(&mspi->base->mask, SPIE_RXB); | 374 | mpc8xxx_spi_write_reg(®_base->mask, SPIE_RXB); |
479 | 375 | ||
480 | mspi->xfer_in_progress = t; | 376 | mspi->xfer_in_progress = t; |
481 | mspi->count = t->len; | 377 | mspi->count = t->len; |
482 | 378 | ||
483 | /* start CPM transfers */ | 379 | /* start CPM transfers */ |
484 | mpc8xxx_spi_cpm_bufs_start(mspi); | 380 | fsl_spi_cpm_bufs_start(mspi); |
485 | 381 | ||
486 | return 0; | 382 | return 0; |
487 | 383 | ||
@@ -491,7 +387,7 @@ err_rx_dma: | |||
491 | return -ENOMEM; | 387 | return -ENOMEM; |
492 | } | 388 | } |
493 | 389 | ||
494 | static void mpc8xxx_spi_cpm_bufs_complete(struct mpc8xxx_spi *mspi) | 390 | static void fsl_spi_cpm_bufs_complete(struct mpc8xxx_spi *mspi) |
495 | { | 391 | { |
496 | struct device *dev = mspi->dev; | 392 | struct device *dev = mspi->dev; |
497 | struct spi_transfer *t = mspi->xfer_in_progress; | 393 | struct spi_transfer *t = mspi->xfer_in_progress; |
@@ -503,31 +399,34 @@ static void mpc8xxx_spi_cpm_bufs_complete(struct mpc8xxx_spi *mspi) | |||
503 | mspi->xfer_in_progress = NULL; | 399 | mspi->xfer_in_progress = NULL; |
504 | } | 400 | } |
505 | 401 | ||
506 | static int mpc8xxx_spi_cpu_bufs(struct mpc8xxx_spi *mspi, | 402 | static int fsl_spi_cpu_bufs(struct mpc8xxx_spi *mspi, |
507 | struct spi_transfer *t, unsigned int len) | 403 | struct spi_transfer *t, unsigned int len) |
508 | { | 404 | { |
509 | u32 word; | 405 | u32 word; |
406 | struct fsl_spi_reg *reg_base = mspi->reg_base; | ||
510 | 407 | ||
511 | mspi->count = len; | 408 | mspi->count = len; |
512 | 409 | ||
513 | /* enable rx ints */ | 410 | /* enable rx ints */ |
514 | mpc8xxx_spi_write_reg(&mspi->base->mask, SPIM_NE); | 411 | mpc8xxx_spi_write_reg(®_base->mask, SPIM_NE); |
515 | 412 | ||
516 | /* transmit word */ | 413 | /* transmit word */ |
517 | word = mspi->get_tx(mspi); | 414 | word = mspi->get_tx(mspi); |
518 | mpc8xxx_spi_write_reg(&mspi->base->transmit, word); | 415 | mpc8xxx_spi_write_reg(®_base->transmit, word); |
519 | 416 | ||
520 | return 0; | 417 | return 0; |
521 | } | 418 | } |
522 | 419 | ||
523 | static int mpc8xxx_spi_bufs(struct spi_device *spi, struct spi_transfer *t, | 420 | static int fsl_spi_bufs(struct spi_device *spi, struct spi_transfer *t, |
524 | bool is_dma_mapped) | 421 | bool is_dma_mapped) |
525 | { | 422 | { |
526 | struct mpc8xxx_spi *mpc8xxx_spi = spi_master_get_devdata(spi->master); | 423 | struct mpc8xxx_spi *mpc8xxx_spi = spi_master_get_devdata(spi->master); |
424 | struct fsl_spi_reg *reg_base; | ||
527 | unsigned int len = t->len; | 425 | unsigned int len = t->len; |
528 | u8 bits_per_word; | 426 | u8 bits_per_word; |
529 | int ret; | 427 | int ret; |
530 | 428 | ||
429 | reg_base = mpc8xxx_spi->reg_base; | ||
531 | bits_per_word = spi->bits_per_word; | 430 | bits_per_word = spi->bits_per_word; |
532 | if (t->bits_per_word) | 431 | if (t->bits_per_word) |
533 | bits_per_word = t->bits_per_word; | 432 | bits_per_word = t->bits_per_word; |
@@ -551,24 +450,24 @@ static int mpc8xxx_spi_bufs(struct spi_device *spi, struct spi_transfer *t, | |||
551 | INIT_COMPLETION(mpc8xxx_spi->done); | 450 | INIT_COMPLETION(mpc8xxx_spi->done); |
552 | 451 | ||
553 | if (mpc8xxx_spi->flags & SPI_CPM_MODE) | 452 | if (mpc8xxx_spi->flags & SPI_CPM_MODE) |
554 | ret = mpc8xxx_spi_cpm_bufs(mpc8xxx_spi, t, is_dma_mapped); | 453 | ret = fsl_spi_cpm_bufs(mpc8xxx_spi, t, is_dma_mapped); |
555 | else | 454 | else |
556 | ret = mpc8xxx_spi_cpu_bufs(mpc8xxx_spi, t, len); | 455 | ret = fsl_spi_cpu_bufs(mpc8xxx_spi, t, len); |
557 | if (ret) | 456 | if (ret) |
558 | return ret; | 457 | return ret; |
559 | 458 | ||
560 | wait_for_completion(&mpc8xxx_spi->done); | 459 | wait_for_completion(&mpc8xxx_spi->done); |
561 | 460 | ||
562 | /* disable rx ints */ | 461 | /* disable rx ints */ |
563 | mpc8xxx_spi_write_reg(&mpc8xxx_spi->base->mask, 0); | 462 | mpc8xxx_spi_write_reg(®_base->mask, 0); |
564 | 463 | ||
565 | if (mpc8xxx_spi->flags & SPI_CPM_MODE) | 464 | if (mpc8xxx_spi->flags & SPI_CPM_MODE) |
566 | mpc8xxx_spi_cpm_bufs_complete(mpc8xxx_spi); | 465 | fsl_spi_cpm_bufs_complete(mpc8xxx_spi); |
567 | 466 | ||
568 | return mpc8xxx_spi->count; | 467 | return mpc8xxx_spi->count; |
569 | } | 468 | } |
570 | 469 | ||
571 | static void mpc8xxx_spi_do_one_msg(struct spi_message *m) | 470 | static void fsl_spi_do_one_msg(struct spi_message *m) |
572 | { | 471 | { |
573 | struct spi_device *spi = m->spi; | 472 | struct spi_device *spi = m->spi; |
574 | struct spi_transfer *t; | 473 | struct spi_transfer *t; |
@@ -584,18 +483,18 @@ static void mpc8xxx_spi_do_one_msg(struct spi_message *m) | |||
584 | status = -EINVAL; | 483 | status = -EINVAL; |
585 | 484 | ||
586 | if (cs_change) | 485 | if (cs_change) |
587 | status = mpc8xxx_spi_setup_transfer(spi, t); | 486 | status = fsl_spi_setup_transfer(spi, t); |
588 | if (status < 0) | 487 | if (status < 0) |
589 | break; | 488 | break; |
590 | } | 489 | } |
591 | 490 | ||
592 | if (cs_change) { | 491 | if (cs_change) { |
593 | mpc8xxx_spi_chipselect(spi, BITBANG_CS_ACTIVE); | 492 | fsl_spi_chipselect(spi, BITBANG_CS_ACTIVE); |
594 | ndelay(nsecs); | 493 | ndelay(nsecs); |
595 | } | 494 | } |
596 | cs_change = t->cs_change; | 495 | cs_change = t->cs_change; |
597 | if (t->len) | 496 | if (t->len) |
598 | status = mpc8xxx_spi_bufs(spi, t, m->is_dma_mapped); | 497 | status = fsl_spi_bufs(spi, t, m->is_dma_mapped); |
599 | if (status) { | 498 | if (status) { |
600 | status = -EMSGSIZE; | 499 | status = -EMSGSIZE; |
601 | break; | 500 | break; |
@@ -607,7 +506,7 @@ static void mpc8xxx_spi_do_one_msg(struct spi_message *m) | |||
607 | 506 | ||
608 | if (cs_change) { | 507 | if (cs_change) { |
609 | ndelay(nsecs); | 508 | ndelay(nsecs); |
610 | mpc8xxx_spi_chipselect(spi, BITBANG_CS_INACTIVE); | 509 | fsl_spi_chipselect(spi, BITBANG_CS_INACTIVE); |
611 | ndelay(nsecs); | 510 | ndelay(nsecs); |
612 | } | 511 | } |
613 | } | 512 | } |
@@ -617,35 +516,16 @@ static void mpc8xxx_spi_do_one_msg(struct spi_message *m) | |||
617 | 516 | ||
618 | if (status || !cs_change) { | 517 | if (status || !cs_change) { |
619 | ndelay(nsecs); | 518 | ndelay(nsecs); |
620 | mpc8xxx_spi_chipselect(spi, BITBANG_CS_INACTIVE); | 519 | fsl_spi_chipselect(spi, BITBANG_CS_INACTIVE); |
621 | } | 520 | } |
622 | 521 | ||
623 | mpc8xxx_spi_setup_transfer(spi, NULL); | 522 | fsl_spi_setup_transfer(spi, NULL); |
624 | } | ||
625 | |||
626 | static void mpc8xxx_spi_work(struct work_struct *work) | ||
627 | { | ||
628 | struct mpc8xxx_spi *mpc8xxx_spi = container_of(work, struct mpc8xxx_spi, | ||
629 | work); | ||
630 | |||
631 | spin_lock_irq(&mpc8xxx_spi->lock); | ||
632 | while (!list_empty(&mpc8xxx_spi->queue)) { | ||
633 | struct spi_message *m = container_of(mpc8xxx_spi->queue.next, | ||
634 | struct spi_message, queue); | ||
635 | |||
636 | list_del_init(&m->queue); | ||
637 | spin_unlock_irq(&mpc8xxx_spi->lock); | ||
638 | |||
639 | mpc8xxx_spi_do_one_msg(m); | ||
640 | |||
641 | spin_lock_irq(&mpc8xxx_spi->lock); | ||
642 | } | ||
643 | spin_unlock_irq(&mpc8xxx_spi->lock); | ||
644 | } | 523 | } |
645 | 524 | ||
646 | static int mpc8xxx_spi_setup(struct spi_device *spi) | 525 | static int fsl_spi_setup(struct spi_device *spi) |
647 | { | 526 | { |
648 | struct mpc8xxx_spi *mpc8xxx_spi; | 527 | struct mpc8xxx_spi *mpc8xxx_spi; |
528 | struct fsl_spi_reg *reg_base; | ||
649 | int retval; | 529 | int retval; |
650 | u32 hw_mode; | 530 | u32 hw_mode; |
651 | struct spi_mpc8xxx_cs *cs = spi->controller_state; | 531 | struct spi_mpc8xxx_cs *cs = spi->controller_state; |
@@ -661,8 +541,10 @@ static int mpc8xxx_spi_setup(struct spi_device *spi) | |||
661 | } | 541 | } |
662 | mpc8xxx_spi = spi_master_get_devdata(spi->master); | 542 | mpc8xxx_spi = spi_master_get_devdata(spi->master); |
663 | 543 | ||
544 | reg_base = mpc8xxx_spi->reg_base; | ||
545 | |||
664 | hw_mode = cs->hw_mode; /* Save original settings */ | 546 | hw_mode = cs->hw_mode; /* Save original settings */ |
665 | cs->hw_mode = mpc8xxx_spi_read_reg(&mpc8xxx_spi->base->mode); | 547 | cs->hw_mode = mpc8xxx_spi_read_reg(®_base->mode); |
666 | /* mask out bits we are going to set */ | 548 | /* mask out bits we are going to set */ |
667 | cs->hw_mode &= ~(SPMODE_CP_BEGIN_EDGECLK | SPMODE_CI_INACTIVEHIGH | 549 | cs->hw_mode &= ~(SPMODE_CP_BEGIN_EDGECLK | SPMODE_CI_INACTIVEHIGH |
668 | | SPMODE_REV | SPMODE_LOOP); | 550 | | SPMODE_REV | SPMODE_LOOP); |
@@ -676,7 +558,7 @@ static int mpc8xxx_spi_setup(struct spi_device *spi) | |||
676 | if (spi->mode & SPI_LOOP) | 558 | if (spi->mode & SPI_LOOP) |
677 | cs->hw_mode |= SPMODE_LOOP; | 559 | cs->hw_mode |= SPMODE_LOOP; |
678 | 560 | ||
679 | retval = mpc8xxx_spi_setup_transfer(spi, NULL); | 561 | retval = fsl_spi_setup_transfer(spi, NULL); |
680 | if (retval < 0) { | 562 | if (retval < 0) { |
681 | cs->hw_mode = hw_mode; /* Restore settings */ | 563 | cs->hw_mode = hw_mode; /* Restore settings */ |
682 | return retval; | 564 | return retval; |
@@ -684,9 +566,10 @@ static int mpc8xxx_spi_setup(struct spi_device *spi) | |||
684 | return 0; | 566 | return 0; |
685 | } | 567 | } |
686 | 568 | ||
687 | static void mpc8xxx_spi_cpm_irq(struct mpc8xxx_spi *mspi, u32 events) | 569 | static void fsl_spi_cpm_irq(struct mpc8xxx_spi *mspi, u32 events) |
688 | { | 570 | { |
689 | u16 len; | 571 | u16 len; |
572 | struct fsl_spi_reg *reg_base = mspi->reg_base; | ||
690 | 573 | ||
691 | dev_dbg(mspi->dev, "%s: bd datlen %d, count %d\n", __func__, | 574 | dev_dbg(mspi->dev, "%s: bd datlen %d, count %d\n", __func__, |
692 | in_be16(&mspi->rx_bd->cbd_datlen), mspi->count); | 575 | in_be16(&mspi->rx_bd->cbd_datlen), mspi->count); |
@@ -698,20 +581,22 @@ static void mpc8xxx_spi_cpm_irq(struct mpc8xxx_spi *mspi, u32 events) | |||
698 | } | 581 | } |
699 | 582 | ||
700 | /* Clear the events */ | 583 | /* Clear the events */ |
701 | mpc8xxx_spi_write_reg(&mspi->base->event, events); | 584 | mpc8xxx_spi_write_reg(®_base->event, events); |
702 | 585 | ||
703 | mspi->count -= len; | 586 | mspi->count -= len; |
704 | if (mspi->count) | 587 | if (mspi->count) |
705 | mpc8xxx_spi_cpm_bufs_start(mspi); | 588 | fsl_spi_cpm_bufs_start(mspi); |
706 | else | 589 | else |
707 | complete(&mspi->done); | 590 | complete(&mspi->done); |
708 | } | 591 | } |
709 | 592 | ||
710 | static void mpc8xxx_spi_cpu_irq(struct mpc8xxx_spi *mspi, u32 events) | 593 | static void fsl_spi_cpu_irq(struct mpc8xxx_spi *mspi, u32 events) |
711 | { | 594 | { |
595 | struct fsl_spi_reg *reg_base = mspi->reg_base; | ||
596 | |||
712 | /* We need handle RX first */ | 597 | /* We need handle RX first */ |
713 | if (events & SPIE_NE) { | 598 | if (events & SPIE_NE) { |
714 | u32 rx_data = mpc8xxx_spi_read_reg(&mspi->base->receive); | 599 | u32 rx_data = mpc8xxx_spi_read_reg(®_base->receive); |
715 | 600 | ||
716 | if (mspi->rx) | 601 | if (mspi->rx) |
717 | mspi->get_rx(rx_data, mspi); | 602 | mspi->get_rx(rx_data, mspi); |
@@ -720,102 +605,80 @@ static void mpc8xxx_spi_cpu_irq(struct mpc8xxx_spi *mspi, u32 events) | |||
720 | if ((events & SPIE_NF) == 0) | 605 | if ((events & SPIE_NF) == 0) |
721 | /* spin until TX is done */ | 606 | /* spin until TX is done */ |
722 | while (((events = | 607 | while (((events = |
723 | mpc8xxx_spi_read_reg(&mspi->base->event)) & | 608 | mpc8xxx_spi_read_reg(®_base->event)) & |
724 | SPIE_NF) == 0) | 609 | SPIE_NF) == 0) |
725 | cpu_relax(); | 610 | cpu_relax(); |
726 | 611 | ||
727 | /* Clear the events */ | 612 | /* Clear the events */ |
728 | mpc8xxx_spi_write_reg(&mspi->base->event, events); | 613 | mpc8xxx_spi_write_reg(®_base->event, events); |
729 | 614 | ||
730 | mspi->count -= 1; | 615 | mspi->count -= 1; |
731 | if (mspi->count) { | 616 | if (mspi->count) { |
732 | u32 word = mspi->get_tx(mspi); | 617 | u32 word = mspi->get_tx(mspi); |
733 | 618 | ||
734 | mpc8xxx_spi_write_reg(&mspi->base->transmit, word); | 619 | mpc8xxx_spi_write_reg(®_base->transmit, word); |
735 | } else { | 620 | } else { |
736 | complete(&mspi->done); | 621 | complete(&mspi->done); |
737 | } | 622 | } |
738 | } | 623 | } |
739 | 624 | ||
740 | static irqreturn_t mpc8xxx_spi_irq(s32 irq, void *context_data) | 625 | static irqreturn_t fsl_spi_irq(s32 irq, void *context_data) |
741 | { | 626 | { |
742 | struct mpc8xxx_spi *mspi = context_data; | 627 | struct mpc8xxx_spi *mspi = context_data; |
743 | irqreturn_t ret = IRQ_NONE; | 628 | irqreturn_t ret = IRQ_NONE; |
744 | u32 events; | 629 | u32 events; |
630 | struct fsl_spi_reg *reg_base = mspi->reg_base; | ||
745 | 631 | ||
746 | /* Get interrupt events(tx/rx) */ | 632 | /* Get interrupt events(tx/rx) */ |
747 | events = mpc8xxx_spi_read_reg(&mspi->base->event); | 633 | events = mpc8xxx_spi_read_reg(®_base->event); |
748 | if (events) | 634 | if (events) |
749 | ret = IRQ_HANDLED; | 635 | ret = IRQ_HANDLED; |
750 | 636 | ||
751 | dev_dbg(mspi->dev, "%s: events %x\n", __func__, events); | 637 | dev_dbg(mspi->dev, "%s: events %x\n", __func__, events); |
752 | 638 | ||
753 | if (mspi->flags & SPI_CPM_MODE) | 639 | if (mspi->flags & SPI_CPM_MODE) |
754 | mpc8xxx_spi_cpm_irq(mspi, events); | 640 | fsl_spi_cpm_irq(mspi, events); |
755 | else | 641 | else |
756 | mpc8xxx_spi_cpu_irq(mspi, events); | 642 | fsl_spi_cpu_irq(mspi, events); |
757 | 643 | ||
758 | return ret; | 644 | return ret; |
759 | } | 645 | } |
760 | 646 | ||
761 | static int mpc8xxx_spi_transfer(struct spi_device *spi, | 647 | static void *fsl_spi_alloc_dummy_rx(void) |
762 | struct spi_message *m) | ||
763 | { | 648 | { |
764 | struct mpc8xxx_spi *mpc8xxx_spi = spi_master_get_devdata(spi->master); | 649 | mutex_lock(&fsl_dummy_rx_lock); |
765 | unsigned long flags; | ||
766 | 650 | ||
767 | m->actual_length = 0; | 651 | if (!fsl_dummy_rx) |
768 | m->status = -EINPROGRESS; | 652 | fsl_dummy_rx = kmalloc(SPI_MRBLR, GFP_KERNEL); |
653 | if (fsl_dummy_rx) | ||
654 | fsl_dummy_rx_refcnt++; | ||
769 | 655 | ||
770 | spin_lock_irqsave(&mpc8xxx_spi->lock, flags); | 656 | mutex_unlock(&fsl_dummy_rx_lock); |
771 | list_add_tail(&m->queue, &mpc8xxx_spi->queue); | ||
772 | queue_work(mpc8xxx_spi->workqueue, &mpc8xxx_spi->work); | ||
773 | spin_unlock_irqrestore(&mpc8xxx_spi->lock, flags); | ||
774 | 657 | ||
775 | return 0; | 658 | return fsl_dummy_rx; |
776 | } | 659 | } |
777 | 660 | ||
778 | 661 | static void fsl_spi_free_dummy_rx(void) | |
779 | static void mpc8xxx_spi_cleanup(struct spi_device *spi) | ||
780 | { | 662 | { |
781 | kfree(spi->controller_state); | 663 | mutex_lock(&fsl_dummy_rx_lock); |
782 | } | ||
783 | 664 | ||
784 | static void *mpc8xxx_spi_alloc_dummy_rx(void) | 665 | switch (fsl_dummy_rx_refcnt) { |
785 | { | ||
786 | mutex_lock(&mpc8xxx_dummy_rx_lock); | ||
787 | |||
788 | if (!mpc8xxx_dummy_rx) | ||
789 | mpc8xxx_dummy_rx = kmalloc(SPI_MRBLR, GFP_KERNEL); | ||
790 | if (mpc8xxx_dummy_rx) | ||
791 | mpc8xxx_dummy_rx_refcnt++; | ||
792 | |||
793 | mutex_unlock(&mpc8xxx_dummy_rx_lock); | ||
794 | |||
795 | return mpc8xxx_dummy_rx; | ||
796 | } | ||
797 | |||
798 | static void mpc8xxx_spi_free_dummy_rx(void) | ||
799 | { | ||
800 | mutex_lock(&mpc8xxx_dummy_rx_lock); | ||
801 | |||
802 | switch (mpc8xxx_dummy_rx_refcnt) { | ||
803 | case 0: | 666 | case 0: |
804 | WARN_ON(1); | 667 | WARN_ON(1); |
805 | break; | 668 | break; |
806 | case 1: | 669 | case 1: |
807 | kfree(mpc8xxx_dummy_rx); | 670 | kfree(fsl_dummy_rx); |
808 | mpc8xxx_dummy_rx = NULL; | 671 | fsl_dummy_rx = NULL; |
809 | /* fall through */ | 672 | /* fall through */ |
810 | default: | 673 | default: |
811 | mpc8xxx_dummy_rx_refcnt--; | 674 | fsl_dummy_rx_refcnt--; |
812 | break; | 675 | break; |
813 | } | 676 | } |
814 | 677 | ||
815 | mutex_unlock(&mpc8xxx_dummy_rx_lock); | 678 | mutex_unlock(&fsl_dummy_rx_lock); |
816 | } | 679 | } |
817 | 680 | ||
818 | static unsigned long mpc8xxx_spi_cpm_get_pram(struct mpc8xxx_spi *mspi) | 681 | static unsigned long fsl_spi_cpm_get_pram(struct mpc8xxx_spi *mspi) |
819 | { | 682 | { |
820 | struct device *dev = mspi->dev; | 683 | struct device *dev = mspi->dev; |
821 | struct device_node *np = dev->of_node; | 684 | struct device_node *np = dev->of_node; |
@@ -869,7 +732,7 @@ static unsigned long mpc8xxx_spi_cpm_get_pram(struct mpc8xxx_spi *mspi) | |||
869 | return pram_ofs; | 732 | return pram_ofs; |
870 | } | 733 | } |
871 | 734 | ||
872 | static int mpc8xxx_spi_cpm_init(struct mpc8xxx_spi *mspi) | 735 | static int fsl_spi_cpm_init(struct mpc8xxx_spi *mspi) |
873 | { | 736 | { |
874 | struct device *dev = mspi->dev; | 737 | struct device *dev = mspi->dev; |
875 | struct device_node *np = dev->of_node; | 738 | struct device_node *np = dev->of_node; |
@@ -881,7 +744,7 @@ static int mpc8xxx_spi_cpm_init(struct mpc8xxx_spi *mspi) | |||
881 | if (!(mspi->flags & SPI_CPM_MODE)) | 744 | if (!(mspi->flags & SPI_CPM_MODE)) |
882 | return 0; | 745 | return 0; |
883 | 746 | ||
884 | if (!mpc8xxx_spi_alloc_dummy_rx()) | 747 | if (!fsl_spi_alloc_dummy_rx()) |
885 | return -ENOMEM; | 748 | return -ENOMEM; |
886 | 749 | ||
887 | if (mspi->flags & SPI_QE) { | 750 | if (mspi->flags & SPI_QE) { |
@@ -902,7 +765,7 @@ static int mpc8xxx_spi_cpm_init(struct mpc8xxx_spi *mspi) | |||
902 | } | 765 | } |
903 | } | 766 | } |
904 | 767 | ||
905 | pram_ofs = mpc8xxx_spi_cpm_get_pram(mspi); | 768 | pram_ofs = fsl_spi_cpm_get_pram(mspi); |
906 | if (IS_ERR_VALUE(pram_ofs)) { | 769 | if (IS_ERR_VALUE(pram_ofs)) { |
907 | dev_err(dev, "can't allocate spi parameter ram\n"); | 770 | dev_err(dev, "can't allocate spi parameter ram\n"); |
908 | goto err_pram; | 771 | goto err_pram; |
@@ -922,7 +785,7 @@ static int mpc8xxx_spi_cpm_init(struct mpc8xxx_spi *mspi) | |||
922 | goto err_dummy_tx; | 785 | goto err_dummy_tx; |
923 | } | 786 | } |
924 | 787 | ||
925 | mspi->dma_dummy_rx = dma_map_single(dev, mpc8xxx_dummy_rx, SPI_MRBLR, | 788 | mspi->dma_dummy_rx = dma_map_single(dev, fsl_dummy_rx, SPI_MRBLR, |
926 | DMA_FROM_DEVICE); | 789 | DMA_FROM_DEVICE); |
927 | if (dma_mapping_error(dev, mspi->dma_dummy_rx)) { | 790 | if (dma_mapping_error(dev, mspi->dma_dummy_rx)) { |
928 | dev_err(dev, "unable to map dummy rx buffer\n"); | 791 | dev_err(dev, "unable to map dummy rx buffer\n"); |
@@ -960,11 +823,11 @@ err_dummy_tx: | |||
960 | err_bds: | 823 | err_bds: |
961 | cpm_muram_free(pram_ofs); | 824 | cpm_muram_free(pram_ofs); |
962 | err_pram: | 825 | err_pram: |
963 | mpc8xxx_spi_free_dummy_rx(); | 826 | fsl_spi_free_dummy_rx(); |
964 | return -ENOMEM; | 827 | return -ENOMEM; |
965 | } | 828 | } |
966 | 829 | ||
967 | static void mpc8xxx_spi_cpm_free(struct mpc8xxx_spi *mspi) | 830 | static void fsl_spi_cpm_free(struct mpc8xxx_spi *mspi) |
968 | { | 831 | { |
969 | struct device *dev = mspi->dev; | 832 | struct device *dev = mspi->dev; |
970 | 833 | ||
@@ -972,30 +835,22 @@ static void mpc8xxx_spi_cpm_free(struct mpc8xxx_spi *mspi) | |||
972 | dma_unmap_single(dev, mspi->dma_dummy_tx, PAGE_SIZE, DMA_TO_DEVICE); | 835 | dma_unmap_single(dev, mspi->dma_dummy_tx, PAGE_SIZE, DMA_TO_DEVICE); |
973 | cpm_muram_free(cpm_muram_offset(mspi->tx_bd)); | 836 | cpm_muram_free(cpm_muram_offset(mspi->tx_bd)); |
974 | cpm_muram_free(cpm_muram_offset(mspi->pram)); | 837 | cpm_muram_free(cpm_muram_offset(mspi->pram)); |
975 | mpc8xxx_spi_free_dummy_rx(); | 838 | fsl_spi_free_dummy_rx(); |
976 | } | 839 | } |
977 | 840 | ||
978 | static const char *mpc8xxx_spi_strmode(unsigned int flags) | 841 | static void fsl_spi_remove(struct mpc8xxx_spi *mspi) |
979 | { | 842 | { |
980 | if (flags & SPI_QE_CPU_MODE) { | 843 | iounmap(mspi->reg_base); |
981 | return "QE CPU"; | 844 | fsl_spi_cpm_free(mspi); |
982 | } else if (flags & SPI_CPM_MODE) { | ||
983 | if (flags & SPI_QE) | ||
984 | return "QE"; | ||
985 | else if (flags & SPI_CPM2) | ||
986 | return "CPM2"; | ||
987 | else | ||
988 | return "CPM1"; | ||
989 | } | ||
990 | return "CPU"; | ||
991 | } | 845 | } |
992 | 846 | ||
993 | static struct spi_master * __devinit | 847 | static struct spi_master * __devinit fsl_spi_probe(struct device *dev, |
994 | mpc8xxx_spi_probe(struct device *dev, struct resource *mem, unsigned int irq) | 848 | struct resource *mem, unsigned int irq) |
995 | { | 849 | { |
996 | struct fsl_spi_platform_data *pdata = dev->platform_data; | 850 | struct fsl_spi_platform_data *pdata = dev->platform_data; |
997 | struct spi_master *master; | 851 | struct spi_master *master; |
998 | struct mpc8xxx_spi *mpc8xxx_spi; | 852 | struct mpc8xxx_spi *mpc8xxx_spi; |
853 | struct fsl_spi_reg *reg_base; | ||
999 | u32 regval; | 854 | u32 regval; |
1000 | int ret = 0; | 855 | int ret = 0; |
1001 | 856 | ||
@@ -1007,132 +862,77 @@ mpc8xxx_spi_probe(struct device *dev, struct resource *mem, unsigned int irq) | |||
1007 | 862 | ||
1008 | dev_set_drvdata(dev, master); | 863 | dev_set_drvdata(dev, master); |
1009 | 864 | ||
1010 | /* the spi->mode bits understood by this driver: */ | 865 | ret = mpc8xxx_spi_probe(dev, mem, irq); |
1011 | master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | 866 | if (ret) |
1012 | | SPI_LSB_FIRST | SPI_LOOP; | 867 | goto err_probe; |
1013 | 868 | ||
1014 | master->setup = mpc8xxx_spi_setup; | 869 | master->setup = fsl_spi_setup; |
1015 | master->transfer = mpc8xxx_spi_transfer; | ||
1016 | master->cleanup = mpc8xxx_spi_cleanup; | ||
1017 | master->dev.of_node = dev->of_node; | ||
1018 | 870 | ||
1019 | mpc8xxx_spi = spi_master_get_devdata(master); | 871 | mpc8xxx_spi = spi_master_get_devdata(master); |
1020 | mpc8xxx_spi->dev = dev; | 872 | mpc8xxx_spi->spi_do_one_msg = fsl_spi_do_one_msg; |
1021 | mpc8xxx_spi->get_rx = mpc8xxx_spi_rx_buf_u8; | 873 | mpc8xxx_spi->spi_remove = fsl_spi_remove; |
1022 | mpc8xxx_spi->get_tx = mpc8xxx_spi_tx_buf_u8; | 874 | |
1023 | mpc8xxx_spi->flags = pdata->flags; | ||
1024 | mpc8xxx_spi->spibrg = pdata->sysclk; | ||
1025 | 875 | ||
1026 | ret = mpc8xxx_spi_cpm_init(mpc8xxx_spi); | 876 | ret = fsl_spi_cpm_init(mpc8xxx_spi); |
1027 | if (ret) | 877 | if (ret) |
1028 | goto err_cpm_init; | 878 | goto err_cpm_init; |
1029 | 879 | ||
1030 | mpc8xxx_spi->rx_shift = 0; | ||
1031 | mpc8xxx_spi->tx_shift = 0; | ||
1032 | if (mpc8xxx_spi->flags & SPI_QE_CPU_MODE) { | 880 | if (mpc8xxx_spi->flags & SPI_QE_CPU_MODE) { |
1033 | mpc8xxx_spi->rx_shift = 16; | 881 | mpc8xxx_spi->rx_shift = 16; |
1034 | mpc8xxx_spi->tx_shift = 24; | 882 | mpc8xxx_spi->tx_shift = 24; |
1035 | } | 883 | } |
1036 | 884 | ||
1037 | init_completion(&mpc8xxx_spi->done); | 885 | mpc8xxx_spi->reg_base = ioremap(mem->start, resource_size(mem)); |
1038 | 886 | if (mpc8xxx_spi->reg_base == NULL) { | |
1039 | mpc8xxx_spi->base = ioremap(mem->start, resource_size(mem)); | ||
1040 | if (mpc8xxx_spi->base == NULL) { | ||
1041 | ret = -ENOMEM; | 887 | ret = -ENOMEM; |
1042 | goto err_ioremap; | 888 | goto err_ioremap; |
1043 | } | 889 | } |
1044 | 890 | ||
1045 | mpc8xxx_spi->irq = irq; | ||
1046 | |||
1047 | /* Register for SPI Interrupt */ | 891 | /* Register for SPI Interrupt */ |
1048 | ret = request_irq(mpc8xxx_spi->irq, mpc8xxx_spi_irq, | 892 | ret = request_irq(mpc8xxx_spi->irq, fsl_spi_irq, |
1049 | 0, "mpc8xxx_spi", mpc8xxx_spi); | 893 | 0, "fsl_spi", mpc8xxx_spi); |
1050 | 894 | ||
1051 | if (ret != 0) | 895 | if (ret != 0) |
1052 | goto unmap_io; | 896 | goto free_irq; |
1053 | 897 | ||
1054 | master->bus_num = pdata->bus_num; | 898 | reg_base = mpc8xxx_spi->reg_base; |
1055 | master->num_chipselect = pdata->max_chipselect; | ||
1056 | 899 | ||
1057 | /* SPI controller initializations */ | 900 | /* SPI controller initializations */ |
1058 | mpc8xxx_spi_write_reg(&mpc8xxx_spi->base->mode, 0); | 901 | mpc8xxx_spi_write_reg(®_base->mode, 0); |
1059 | mpc8xxx_spi_write_reg(&mpc8xxx_spi->base->mask, 0); | 902 | mpc8xxx_spi_write_reg(®_base->mask, 0); |
1060 | mpc8xxx_spi_write_reg(&mpc8xxx_spi->base->command, 0); | 903 | mpc8xxx_spi_write_reg(®_base->command, 0); |
1061 | mpc8xxx_spi_write_reg(&mpc8xxx_spi->base->event, 0xffffffff); | 904 | mpc8xxx_spi_write_reg(®_base->event, 0xffffffff); |
1062 | 905 | ||
1063 | /* Enable SPI interface */ | 906 | /* Enable SPI interface */ |
1064 | regval = pdata->initial_spmode | SPMODE_INIT_VAL | SPMODE_ENABLE; | 907 | regval = pdata->initial_spmode | SPMODE_INIT_VAL | SPMODE_ENABLE; |
1065 | if (mpc8xxx_spi->flags & SPI_QE_CPU_MODE) | 908 | if (mpc8xxx_spi->flags & SPI_QE_CPU_MODE) |
1066 | regval |= SPMODE_OP; | 909 | regval |= SPMODE_OP; |
1067 | 910 | ||
1068 | mpc8xxx_spi_write_reg(&mpc8xxx_spi->base->mode, regval); | 911 | mpc8xxx_spi_write_reg(®_base->mode, regval); |
1069 | spin_lock_init(&mpc8xxx_spi->lock); | ||
1070 | init_completion(&mpc8xxx_spi->done); | ||
1071 | INIT_WORK(&mpc8xxx_spi->work, mpc8xxx_spi_work); | ||
1072 | INIT_LIST_HEAD(&mpc8xxx_spi->queue); | ||
1073 | |||
1074 | mpc8xxx_spi->workqueue = create_singlethread_workqueue( | ||
1075 | dev_name(master->dev.parent)); | ||
1076 | if (mpc8xxx_spi->workqueue == NULL) { | ||
1077 | ret = -EBUSY; | ||
1078 | goto free_irq; | ||
1079 | } | ||
1080 | 912 | ||
1081 | ret = spi_register_master(master); | 913 | ret = spi_register_master(master); |
1082 | if (ret < 0) | 914 | if (ret < 0) |
1083 | goto unreg_master; | 915 | goto unreg_master; |
1084 | 916 | ||
1085 | dev_info(dev, "at 0x%p (irq = %d), %s mode\n", mpc8xxx_spi->base, | 917 | dev_info(dev, "at 0x%p (irq = %d), %s mode\n", reg_base, |
1086 | mpc8xxx_spi->irq, mpc8xxx_spi_strmode(mpc8xxx_spi->flags)); | 918 | mpc8xxx_spi->irq, mpc8xxx_spi_strmode(mpc8xxx_spi->flags)); |
1087 | 919 | ||
1088 | return master; | 920 | return master; |
1089 | 921 | ||
1090 | unreg_master: | 922 | unreg_master: |
1091 | destroy_workqueue(mpc8xxx_spi->workqueue); | ||
1092 | free_irq: | ||
1093 | free_irq(mpc8xxx_spi->irq, mpc8xxx_spi); | 923 | free_irq(mpc8xxx_spi->irq, mpc8xxx_spi); |
1094 | unmap_io: | 924 | free_irq: |
1095 | iounmap(mpc8xxx_spi->base); | 925 | iounmap(mpc8xxx_spi->reg_base); |
1096 | err_ioremap: | 926 | err_ioremap: |
1097 | mpc8xxx_spi_cpm_free(mpc8xxx_spi); | 927 | fsl_spi_cpm_free(mpc8xxx_spi); |
1098 | err_cpm_init: | 928 | err_cpm_init: |
929 | err_probe: | ||
1099 | spi_master_put(master); | 930 | spi_master_put(master); |
1100 | err: | 931 | err: |
1101 | return ERR_PTR(ret); | 932 | return ERR_PTR(ret); |
1102 | } | 933 | } |
1103 | 934 | ||
1104 | static int __devexit mpc8xxx_spi_remove(struct device *dev) | 935 | static void fsl_spi_cs_control(struct spi_device *spi, bool on) |
1105 | { | ||
1106 | struct mpc8xxx_spi *mpc8xxx_spi; | ||
1107 | struct spi_master *master; | ||
1108 | |||
1109 | master = dev_get_drvdata(dev); | ||
1110 | mpc8xxx_spi = spi_master_get_devdata(master); | ||
1111 | |||
1112 | flush_workqueue(mpc8xxx_spi->workqueue); | ||
1113 | destroy_workqueue(mpc8xxx_spi->workqueue); | ||
1114 | spi_unregister_master(master); | ||
1115 | |||
1116 | free_irq(mpc8xxx_spi->irq, mpc8xxx_spi); | ||
1117 | iounmap(mpc8xxx_spi->base); | ||
1118 | mpc8xxx_spi_cpm_free(mpc8xxx_spi); | ||
1119 | |||
1120 | return 0; | ||
1121 | } | ||
1122 | |||
1123 | struct mpc8xxx_spi_probe_info { | ||
1124 | struct fsl_spi_platform_data pdata; | ||
1125 | int *gpios; | ||
1126 | bool *alow_flags; | ||
1127 | }; | ||
1128 | |||
1129 | static struct mpc8xxx_spi_probe_info * | ||
1130 | to_of_pinfo(struct fsl_spi_platform_data *pdata) | ||
1131 | { | ||
1132 | return container_of(pdata, struct mpc8xxx_spi_probe_info, pdata); | ||
1133 | } | ||
1134 | |||
1135 | static void mpc8xxx_spi_cs_control(struct spi_device *spi, bool on) | ||
1136 | { | 936 | { |
1137 | struct device *dev = spi->dev.parent; | 937 | struct device *dev = spi->dev.parent; |
1138 | struct mpc8xxx_spi_probe_info *pinfo = to_of_pinfo(dev->platform_data); | 938 | struct mpc8xxx_spi_probe_info *pinfo = to_of_pinfo(dev->platform_data); |
@@ -1143,7 +943,7 @@ static void mpc8xxx_spi_cs_control(struct spi_device *spi, bool on) | |||
1143 | gpio_set_value(gpio, on ^ alow); | 943 | gpio_set_value(gpio, on ^ alow); |
1144 | } | 944 | } |
1145 | 945 | ||
1146 | static int of_mpc8xxx_spi_get_chipselects(struct device *dev) | 946 | static int of_fsl_spi_get_chipselects(struct device *dev) |
1147 | { | 947 | { |
1148 | struct device_node *np = dev->of_node; | 948 | struct device_node *np = dev->of_node; |
1149 | struct fsl_spi_platform_data *pdata = dev->platform_data; | 949 | struct fsl_spi_platform_data *pdata = dev->platform_data; |
@@ -1204,7 +1004,7 @@ static int of_mpc8xxx_spi_get_chipselects(struct device *dev) | |||
1204 | } | 1004 | } |
1205 | 1005 | ||
1206 | pdata->max_chipselect = ngpios; | 1006 | pdata->max_chipselect = ngpios; |
1207 | pdata->cs_control = mpc8xxx_spi_cs_control; | 1007 | pdata->cs_control = fsl_spi_cs_control; |
1208 | 1008 | ||
1209 | return 0; | 1009 | return 0; |
1210 | 1010 | ||
@@ -1223,7 +1023,7 @@ err_alloc_flags: | |||
1223 | return ret; | 1023 | return ret; |
1224 | } | 1024 | } |
1225 | 1025 | ||
1226 | static int of_mpc8xxx_spi_free_chipselects(struct device *dev) | 1026 | static int of_fsl_spi_free_chipselects(struct device *dev) |
1227 | { | 1027 | { |
1228 | struct fsl_spi_platform_data *pdata = dev->platform_data; | 1028 | struct fsl_spi_platform_data *pdata = dev->platform_data; |
1229 | struct mpc8xxx_spi_probe_info *pinfo = to_of_pinfo(pdata); | 1029 | struct mpc8xxx_spi_probe_info *pinfo = to_of_pinfo(pdata); |
@@ -1242,50 +1042,21 @@ static int of_mpc8xxx_spi_free_chipselects(struct device *dev) | |||
1242 | return 0; | 1042 | return 0; |
1243 | } | 1043 | } |
1244 | 1044 | ||
1245 | static int __devinit of_mpc8xxx_spi_probe(struct platform_device *ofdev, | 1045 | static int __devinit of_fsl_spi_probe(struct platform_device *ofdev, |
1246 | const struct of_device_id *ofid) | 1046 | const struct of_device_id *ofid) |
1247 | { | 1047 | { |
1248 | struct device *dev = &ofdev->dev; | 1048 | struct device *dev = &ofdev->dev; |
1249 | struct device_node *np = ofdev->dev.of_node; | 1049 | struct device_node *np = ofdev->dev.of_node; |
1250 | struct mpc8xxx_spi_probe_info *pinfo; | ||
1251 | struct fsl_spi_platform_data *pdata; | ||
1252 | struct spi_master *master; | 1050 | struct spi_master *master; |
1253 | struct resource mem; | 1051 | struct resource mem; |
1254 | struct resource irq; | 1052 | struct resource irq; |
1255 | const void *prop; | ||
1256 | int ret = -ENOMEM; | 1053 | int ret = -ENOMEM; |
1257 | 1054 | ||
1258 | pinfo = kzalloc(sizeof(*pinfo), GFP_KERNEL); | 1055 | ret = of_mpc8xxx_spi_probe(ofdev, ofid); |
1259 | if (!pinfo) | 1056 | if (ret) |
1260 | return -ENOMEM; | 1057 | return ret; |
1261 | |||
1262 | pdata = &pinfo->pdata; | ||
1263 | dev->platform_data = pdata; | ||
1264 | |||
1265 | /* Allocate bus num dynamically. */ | ||
1266 | pdata->bus_num = -1; | ||
1267 | |||
1268 | /* SPI controller is either clocked from QE or SoC clock. */ | ||
1269 | pdata->sysclk = get_brgfreq(); | ||
1270 | if (pdata->sysclk == -1) { | ||
1271 | pdata->sysclk = fsl_get_sys_freq(); | ||
1272 | if (pdata->sysclk == -1) { | ||
1273 | ret = -ENODEV; | ||
1274 | goto err_clk; | ||
1275 | } | ||
1276 | } | ||
1277 | 1058 | ||
1278 | prop = of_get_property(np, "mode", NULL); | 1059 | ret = of_fsl_spi_get_chipselects(dev); |
1279 | if (prop && !strcmp(prop, "cpu-qe")) | ||
1280 | pdata->flags = SPI_QE_CPU_MODE; | ||
1281 | else if (prop && !strcmp(prop, "qe")) | ||
1282 | pdata->flags = SPI_CPM_MODE | SPI_QE; | ||
1283 | else if (of_device_is_compatible(np, "fsl,cpm2-spi")) | ||
1284 | pdata->flags = SPI_CPM_MODE | SPI_CPM2; | ||
1285 | else if (of_device_is_compatible(np, "fsl,cpm1-spi")) | ||
1286 | pdata->flags = SPI_CPM_MODE | SPI_CPM1; | ||
1287 | |||
1288 | ret = of_mpc8xxx_spi_get_chipselects(dev); | ||
1289 | if (ret) | 1060 | if (ret) |
1290 | goto err; | 1061 | goto err; |
1291 | 1062 | ||
@@ -1299,7 +1070,7 @@ static int __devinit of_mpc8xxx_spi_probe(struct platform_device *ofdev, | |||
1299 | goto err; | 1070 | goto err; |
1300 | } | 1071 | } |
1301 | 1072 | ||
1302 | master = mpc8xxx_spi_probe(dev, &mem, irq.start); | 1073 | master = fsl_spi_probe(dev, &mem, irq.start); |
1303 | if (IS_ERR(master)) { | 1074 | if (IS_ERR(master)) { |
1304 | ret = PTR_ERR(master); | 1075 | ret = PTR_ERR(master); |
1305 | goto err; | 1076 | goto err; |
@@ -1308,42 +1079,40 @@ static int __devinit of_mpc8xxx_spi_probe(struct platform_device *ofdev, | |||
1308 | return 0; | 1079 | return 0; |
1309 | 1080 | ||
1310 | err: | 1081 | err: |
1311 | of_mpc8xxx_spi_free_chipselects(dev); | 1082 | of_fsl_spi_free_chipselects(dev); |
1312 | err_clk: | ||
1313 | kfree(pinfo); | ||
1314 | return ret; | 1083 | return ret; |
1315 | } | 1084 | } |
1316 | 1085 | ||
1317 | static int __devexit of_mpc8xxx_spi_remove(struct platform_device *ofdev) | 1086 | static int __devexit of_fsl_spi_remove(struct platform_device *ofdev) |
1318 | { | 1087 | { |
1319 | int ret; | 1088 | int ret; |
1320 | 1089 | ||
1321 | ret = mpc8xxx_spi_remove(&ofdev->dev); | 1090 | ret = mpc8xxx_spi_remove(&ofdev->dev); |
1322 | if (ret) | 1091 | if (ret) |
1323 | return ret; | 1092 | return ret; |
1324 | of_mpc8xxx_spi_free_chipselects(&ofdev->dev); | 1093 | of_fsl_spi_free_chipselects(&ofdev->dev); |
1325 | return 0; | 1094 | return 0; |
1326 | } | 1095 | } |
1327 | 1096 | ||
1328 | static const struct of_device_id of_mpc8xxx_spi_match[] = { | 1097 | static const struct of_device_id of_fsl_spi_match[] = { |
1329 | { .compatible = "fsl,spi" }, | 1098 | { .compatible = "fsl,spi" }, |
1330 | {}, | 1099 | {} |
1331 | }; | 1100 | }; |
1332 | MODULE_DEVICE_TABLE(of, of_mpc8xxx_spi_match); | 1101 | MODULE_DEVICE_TABLE(of, of_fsl_spi_match); |
1333 | 1102 | ||
1334 | static struct of_platform_driver of_mpc8xxx_spi_driver = { | 1103 | static struct of_platform_driver of_fsl_spi_driver = { |
1335 | .driver = { | 1104 | .driver = { |
1336 | .name = "mpc8xxx_spi", | 1105 | .name = "fsl_spi", |
1337 | .owner = THIS_MODULE, | 1106 | .owner = THIS_MODULE, |
1338 | .of_match_table = of_mpc8xxx_spi_match, | 1107 | .of_match_table = of_fsl_spi_match, |
1339 | }, | 1108 | }, |
1340 | .probe = of_mpc8xxx_spi_probe, | 1109 | .probe = of_fsl_spi_probe, |
1341 | .remove = __devexit_p(of_mpc8xxx_spi_remove), | 1110 | .remove = __devexit_p(of_fsl_spi_remove), |
1342 | }; | 1111 | }; |
1343 | 1112 | ||
1344 | #ifdef CONFIG_MPC832x_RDB | 1113 | #ifdef CONFIG_MPC832x_RDB |
1345 | /* | 1114 | /* |
1346 | * XXX XXX XXX | 1115 | * XXX XXX XXX |
1347 | * This is "legacy" platform driver, was used by the MPC8323E-RDB boards | 1116 | * This is "legacy" platform driver, was used by the MPC8323E-RDB boards |
1348 | * only. The driver should go away soon, since newer MPC8323E-RDB's device | 1117 | * only. The driver should go away soon, since newer MPC8323E-RDB's device |
1349 | * tree can work with OpenFirmware driver. But for now we support old trees | 1118 | * tree can work with OpenFirmware driver. But for now we support old trees |
@@ -1366,7 +1135,7 @@ static int __devinit plat_mpc8xxx_spi_probe(struct platform_device *pdev) | |||
1366 | if (irq <= 0) | 1135 | if (irq <= 0) |
1367 | return -EINVAL; | 1136 | return -EINVAL; |
1368 | 1137 | ||
1369 | master = mpc8xxx_spi_probe(&pdev->dev, mem, irq); | 1138 | master = fsl_spi_probe(&pdev->dev, mem, irq); |
1370 | if (IS_ERR(master)) | 1139 | if (IS_ERR(master)) |
1371 | return PTR_ERR(master); | 1140 | return PTR_ERR(master); |
1372 | return 0; | 1141 | return 0; |
@@ -1405,21 +1174,20 @@ static void __init legacy_driver_register(void) {} | |||
1405 | static void __exit legacy_driver_unregister(void) {} | 1174 | static void __exit legacy_driver_unregister(void) {} |
1406 | #endif /* CONFIG_MPC832x_RDB */ | 1175 | #endif /* CONFIG_MPC832x_RDB */ |
1407 | 1176 | ||
1408 | static int __init mpc8xxx_spi_init(void) | 1177 | static int __init fsl_spi_init(void) |
1409 | { | 1178 | { |
1410 | legacy_driver_register(); | 1179 | legacy_driver_register(); |
1411 | return of_register_platform_driver(&of_mpc8xxx_spi_driver); | 1180 | return of_register_platform_driver(&of_fsl_spi_driver); |
1412 | } | 1181 | } |
1182 | module_init(fsl_spi_init); | ||
1413 | 1183 | ||
1414 | static void __exit mpc8xxx_spi_exit(void) | 1184 | static void __exit fsl_spi_exit(void) |
1415 | { | 1185 | { |
1416 | of_unregister_platform_driver(&of_mpc8xxx_spi_driver); | 1186 | of_unregister_platform_driver(&of_fsl_spi_driver); |
1417 | legacy_driver_unregister(); | 1187 | legacy_driver_unregister(); |
1418 | } | 1188 | } |
1419 | 1189 | module_exit(fsl_spi_exit); | |
1420 | module_init(mpc8xxx_spi_init); | ||
1421 | module_exit(mpc8xxx_spi_exit); | ||
1422 | 1190 | ||
1423 | MODULE_AUTHOR("Kumar Gala"); | 1191 | MODULE_AUTHOR("Kumar Gala"); |
1424 | MODULE_DESCRIPTION("Simple MPC8xxx SPI Driver"); | 1192 | MODULE_DESCRIPTION("Simple Freescale SPI Driver"); |
1425 | MODULE_LICENSE("GPL"); | 1193 | MODULE_LICENSE("GPL"); |
diff --git a/drivers/spi/spi_s3c64xx.c b/drivers/spi/spi_s3c64xx.c index c3038da2648a..795828b90f45 100644 --- a/drivers/spi/spi_s3c64xx.c +++ b/drivers/spi/spi_s3c64xx.c | |||
@@ -261,15 +261,25 @@ static void enable_datapath(struct s3c64xx_spi_driver_data *sdd, | |||
261 | chcfg |= S3C64XX_SPI_CH_TXCH_ON; | 261 | chcfg |= S3C64XX_SPI_CH_TXCH_ON; |
262 | if (dma_mode) { | 262 | if (dma_mode) { |
263 | modecfg |= S3C64XX_SPI_MODE_TXDMA_ON; | 263 | modecfg |= S3C64XX_SPI_MODE_TXDMA_ON; |
264 | s3c2410_dma_config(sdd->tx_dmach, 1); | 264 | s3c2410_dma_config(sdd->tx_dmach, sdd->cur_bpw / 8); |
265 | s3c2410_dma_enqueue(sdd->tx_dmach, (void *)sdd, | 265 | s3c2410_dma_enqueue(sdd->tx_dmach, (void *)sdd, |
266 | xfer->tx_dma, xfer->len); | 266 | xfer->tx_dma, xfer->len); |
267 | s3c2410_dma_ctrl(sdd->tx_dmach, S3C2410_DMAOP_START); | 267 | s3c2410_dma_ctrl(sdd->tx_dmach, S3C2410_DMAOP_START); |
268 | } else { | 268 | } else { |
269 | unsigned char *buf = (unsigned char *) xfer->tx_buf; | 269 | switch (sdd->cur_bpw) { |
270 | int i = 0; | 270 | case 32: |
271 | while (i < xfer->len) | 271 | iowrite32_rep(regs + S3C64XX_SPI_TX_DATA, |
272 | writeb(buf[i++], regs + S3C64XX_SPI_TX_DATA); | 272 | xfer->tx_buf, xfer->len / 4); |
273 | break; | ||
274 | case 16: | ||
275 | iowrite16_rep(regs + S3C64XX_SPI_TX_DATA, | ||
276 | xfer->tx_buf, xfer->len / 2); | ||
277 | break; | ||
278 | default: | ||
279 | iowrite8_rep(regs + S3C64XX_SPI_TX_DATA, | ||
280 | xfer->tx_buf, xfer->len); | ||
281 | break; | ||
282 | } | ||
273 | } | 283 | } |
274 | } | 284 | } |
275 | 285 | ||
@@ -286,7 +296,7 @@ static void enable_datapath(struct s3c64xx_spi_driver_data *sdd, | |||
286 | writel(((xfer->len * 8 / sdd->cur_bpw) & 0xffff) | 296 | writel(((xfer->len * 8 / sdd->cur_bpw) & 0xffff) |
287 | | S3C64XX_SPI_PACKET_CNT_EN, | 297 | | S3C64XX_SPI_PACKET_CNT_EN, |
288 | regs + S3C64XX_SPI_PACKET_CNT); | 298 | regs + S3C64XX_SPI_PACKET_CNT); |
289 | s3c2410_dma_config(sdd->rx_dmach, 1); | 299 | s3c2410_dma_config(sdd->rx_dmach, sdd->cur_bpw / 8); |
290 | s3c2410_dma_enqueue(sdd->rx_dmach, (void *)sdd, | 300 | s3c2410_dma_enqueue(sdd->rx_dmach, (void *)sdd, |
291 | xfer->rx_dma, xfer->len); | 301 | xfer->rx_dma, xfer->len); |
292 | s3c2410_dma_ctrl(sdd->rx_dmach, S3C2410_DMAOP_START); | 302 | s3c2410_dma_ctrl(sdd->rx_dmach, S3C2410_DMAOP_START); |
@@ -366,20 +376,26 @@ static int wait_for_xfer(struct s3c64xx_spi_driver_data *sdd, | |||
366 | return -EIO; | 376 | return -EIO; |
367 | } | 377 | } |
368 | } else { | 378 | } else { |
369 | unsigned char *buf; | ||
370 | int i; | ||
371 | |||
372 | /* If it was only Tx */ | 379 | /* If it was only Tx */ |
373 | if (xfer->rx_buf == NULL) { | 380 | if (xfer->rx_buf == NULL) { |
374 | sdd->state &= ~TXBUSY; | 381 | sdd->state &= ~TXBUSY; |
375 | return 0; | 382 | return 0; |
376 | } | 383 | } |
377 | 384 | ||
378 | i = 0; | 385 | switch (sdd->cur_bpw) { |
379 | buf = xfer->rx_buf; | 386 | case 32: |
380 | while (i < xfer->len) | 387 | ioread32_rep(regs + S3C64XX_SPI_RX_DATA, |
381 | buf[i++] = readb(regs + S3C64XX_SPI_RX_DATA); | 388 | xfer->rx_buf, xfer->len / 4); |
382 | 389 | break; | |
390 | case 16: | ||
391 | ioread16_rep(regs + S3C64XX_SPI_RX_DATA, | ||
392 | xfer->rx_buf, xfer->len / 2); | ||
393 | break; | ||
394 | default: | ||
395 | ioread8_rep(regs + S3C64XX_SPI_RX_DATA, | ||
396 | xfer->rx_buf, xfer->len); | ||
397 | break; | ||
398 | } | ||
383 | sdd->state &= ~RXBUSY; | 399 | sdd->state &= ~RXBUSY; |
384 | } | 400 | } |
385 | 401 | ||
@@ -399,13 +415,18 @@ static inline void disable_cs(struct s3c64xx_spi_driver_data *sdd, | |||
399 | 415 | ||
400 | static void s3c64xx_spi_config(struct s3c64xx_spi_driver_data *sdd) | 416 | static void s3c64xx_spi_config(struct s3c64xx_spi_driver_data *sdd) |
401 | { | 417 | { |
418 | struct s3c64xx_spi_info *sci = sdd->cntrlr_info; | ||
402 | void __iomem *regs = sdd->regs; | 419 | void __iomem *regs = sdd->regs; |
403 | u32 val; | 420 | u32 val; |
404 | 421 | ||
405 | /* Disable Clock */ | 422 | /* Disable Clock */ |
406 | val = readl(regs + S3C64XX_SPI_CLK_CFG); | 423 | if (sci->clk_from_cmu) { |
407 | val &= ~S3C64XX_SPI_ENCLK_ENABLE; | 424 | clk_disable(sdd->src_clk); |
408 | writel(val, regs + S3C64XX_SPI_CLK_CFG); | 425 | } else { |
426 | val = readl(regs + S3C64XX_SPI_CLK_CFG); | ||
427 | val &= ~S3C64XX_SPI_ENCLK_ENABLE; | ||
428 | writel(val, regs + S3C64XX_SPI_CLK_CFG); | ||
429 | } | ||
409 | 430 | ||
410 | /* Set Polarity and Phase */ | 431 | /* Set Polarity and Phase */ |
411 | val = readl(regs + S3C64XX_SPI_CH_CFG); | 432 | val = readl(regs + S3C64XX_SPI_CH_CFG); |
@@ -429,29 +450,39 @@ static void s3c64xx_spi_config(struct s3c64xx_spi_driver_data *sdd) | |||
429 | switch (sdd->cur_bpw) { | 450 | switch (sdd->cur_bpw) { |
430 | case 32: | 451 | case 32: |
431 | val |= S3C64XX_SPI_MODE_BUS_TSZ_WORD; | 452 | val |= S3C64XX_SPI_MODE_BUS_TSZ_WORD; |
453 | val |= S3C64XX_SPI_MODE_CH_TSZ_WORD; | ||
432 | break; | 454 | break; |
433 | case 16: | 455 | case 16: |
434 | val |= S3C64XX_SPI_MODE_BUS_TSZ_HALFWORD; | 456 | val |= S3C64XX_SPI_MODE_BUS_TSZ_HALFWORD; |
457 | val |= S3C64XX_SPI_MODE_CH_TSZ_HALFWORD; | ||
435 | break; | 458 | break; |
436 | default: | 459 | default: |
437 | val |= S3C64XX_SPI_MODE_BUS_TSZ_BYTE; | 460 | val |= S3C64XX_SPI_MODE_BUS_TSZ_BYTE; |
461 | val |= S3C64XX_SPI_MODE_CH_TSZ_BYTE; | ||
438 | break; | 462 | break; |
439 | } | 463 | } |
440 | val |= S3C64XX_SPI_MODE_CH_TSZ_BYTE; /* Always 8bits wide */ | ||
441 | 464 | ||
442 | writel(val, regs + S3C64XX_SPI_MODE_CFG); | 465 | writel(val, regs + S3C64XX_SPI_MODE_CFG); |
443 | 466 | ||
444 | /* Configure Clock */ | 467 | if (sci->clk_from_cmu) { |
445 | val = readl(regs + S3C64XX_SPI_CLK_CFG); | 468 | /* Configure Clock */ |
446 | val &= ~S3C64XX_SPI_PSR_MASK; | 469 | /* There is half-multiplier before the SPI */ |
447 | val |= ((clk_get_rate(sdd->src_clk) / sdd->cur_speed / 2 - 1) | 470 | clk_set_rate(sdd->src_clk, sdd->cur_speed * 2); |
448 | & S3C64XX_SPI_PSR_MASK); | 471 | /* Enable Clock */ |
449 | writel(val, regs + S3C64XX_SPI_CLK_CFG); | 472 | clk_enable(sdd->src_clk); |
450 | 473 | } else { | |
451 | /* Enable Clock */ | 474 | /* Configure Clock */ |
452 | val = readl(regs + S3C64XX_SPI_CLK_CFG); | 475 | val = readl(regs + S3C64XX_SPI_CLK_CFG); |
453 | val |= S3C64XX_SPI_ENCLK_ENABLE; | 476 | val &= ~S3C64XX_SPI_PSR_MASK; |
454 | writel(val, regs + S3C64XX_SPI_CLK_CFG); | 477 | val |= ((clk_get_rate(sdd->src_clk) / sdd->cur_speed / 2 - 1) |
478 | & S3C64XX_SPI_PSR_MASK); | ||
479 | writel(val, regs + S3C64XX_SPI_CLK_CFG); | ||
480 | |||
481 | /* Enable Clock */ | ||
482 | val = readl(regs + S3C64XX_SPI_CLK_CFG); | ||
483 | val |= S3C64XX_SPI_ENCLK_ENABLE; | ||
484 | writel(val, regs + S3C64XX_SPI_CLK_CFG); | ||
485 | } | ||
455 | } | 486 | } |
456 | 487 | ||
457 | static void s3c64xx_spi_dma_rxcb(struct s3c2410_dma_chan *chan, void *buf_id, | 488 | static void s3c64xx_spi_dma_rxcb(struct s3c2410_dma_chan *chan, void *buf_id, |
@@ -499,6 +530,7 @@ static void s3c64xx_spi_dma_txcb(struct s3c2410_dma_chan *chan, void *buf_id, | |||
499 | static int s3c64xx_spi_map_mssg(struct s3c64xx_spi_driver_data *sdd, | 530 | static int s3c64xx_spi_map_mssg(struct s3c64xx_spi_driver_data *sdd, |
500 | struct spi_message *msg) | 531 | struct spi_message *msg) |
501 | { | 532 | { |
533 | struct s3c64xx_spi_info *sci = sdd->cntrlr_info; | ||
502 | struct device *dev = &sdd->pdev->dev; | 534 | struct device *dev = &sdd->pdev->dev; |
503 | struct spi_transfer *xfer; | 535 | struct spi_transfer *xfer; |
504 | 536 | ||
@@ -514,6 +546,9 @@ static int s3c64xx_spi_map_mssg(struct s3c64xx_spi_driver_data *sdd, | |||
514 | /* Map until end or first fail */ | 546 | /* Map until end or first fail */ |
515 | list_for_each_entry(xfer, &msg->transfers, transfer_list) { | 547 | list_for_each_entry(xfer, &msg->transfers, transfer_list) { |
516 | 548 | ||
549 | if (xfer->len <= ((sci->fifo_lvl_mask >> 1) + 1)) | ||
550 | continue; | ||
551 | |||
517 | if (xfer->tx_buf != NULL) { | 552 | if (xfer->tx_buf != NULL) { |
518 | xfer->tx_dma = dma_map_single(dev, | 553 | xfer->tx_dma = dma_map_single(dev, |
519 | (void *)xfer->tx_buf, xfer->len, | 554 | (void *)xfer->tx_buf, xfer->len, |
@@ -545,6 +580,7 @@ static int s3c64xx_spi_map_mssg(struct s3c64xx_spi_driver_data *sdd, | |||
545 | static void s3c64xx_spi_unmap_mssg(struct s3c64xx_spi_driver_data *sdd, | 580 | static void s3c64xx_spi_unmap_mssg(struct s3c64xx_spi_driver_data *sdd, |
546 | struct spi_message *msg) | 581 | struct spi_message *msg) |
547 | { | 582 | { |
583 | struct s3c64xx_spi_info *sci = sdd->cntrlr_info; | ||
548 | struct device *dev = &sdd->pdev->dev; | 584 | struct device *dev = &sdd->pdev->dev; |
549 | struct spi_transfer *xfer; | 585 | struct spi_transfer *xfer; |
550 | 586 | ||
@@ -553,6 +589,9 @@ static void s3c64xx_spi_unmap_mssg(struct s3c64xx_spi_driver_data *sdd, | |||
553 | 589 | ||
554 | list_for_each_entry(xfer, &msg->transfers, transfer_list) { | 590 | list_for_each_entry(xfer, &msg->transfers, transfer_list) { |
555 | 591 | ||
592 | if (xfer->len <= ((sci->fifo_lvl_mask >> 1) + 1)) | ||
593 | continue; | ||
594 | |||
556 | if (xfer->rx_buf != NULL | 595 | if (xfer->rx_buf != NULL |
557 | && xfer->rx_dma != XFER_DMAADDR_INVALID) | 596 | && xfer->rx_dma != XFER_DMAADDR_INVALID) |
558 | dma_unmap_single(dev, xfer->rx_dma, | 597 | dma_unmap_single(dev, xfer->rx_dma, |
@@ -608,6 +647,14 @@ static void handle_msg(struct s3c64xx_spi_driver_data *sdd, | |||
608 | bpw = xfer->bits_per_word ? : spi->bits_per_word; | 647 | bpw = xfer->bits_per_word ? : spi->bits_per_word; |
609 | speed = xfer->speed_hz ? : spi->max_speed_hz; | 648 | speed = xfer->speed_hz ? : spi->max_speed_hz; |
610 | 649 | ||
650 | if (xfer->len % (bpw / 8)) { | ||
651 | dev_err(&spi->dev, | ||
652 | "Xfer length(%u) not a multiple of word size(%u)\n", | ||
653 | xfer->len, bpw / 8); | ||
654 | status = -EIO; | ||
655 | goto out; | ||
656 | } | ||
657 | |||
611 | if (bpw != sdd->cur_bpw || speed != sdd->cur_speed) { | 658 | if (bpw != sdd->cur_bpw || speed != sdd->cur_speed) { |
612 | sdd->cur_bpw = bpw; | 659 | sdd->cur_bpw = bpw; |
613 | sdd->cur_speed = speed; | 660 | sdd->cur_speed = speed; |
@@ -798,7 +845,6 @@ static int s3c64xx_spi_setup(struct spi_device *spi) | |||
798 | struct s3c64xx_spi_driver_data *sdd; | 845 | struct s3c64xx_spi_driver_data *sdd; |
799 | struct s3c64xx_spi_info *sci; | 846 | struct s3c64xx_spi_info *sci; |
800 | struct spi_message *msg; | 847 | struct spi_message *msg; |
801 | u32 psr, speed; | ||
802 | unsigned long flags; | 848 | unsigned long flags; |
803 | int err = 0; | 849 | int err = 0; |
804 | 850 | ||
@@ -841,32 +887,37 @@ static int s3c64xx_spi_setup(struct spi_device *spi) | |||
841 | } | 887 | } |
842 | 888 | ||
843 | /* Check if we can provide the requested rate */ | 889 | /* Check if we can provide the requested rate */ |
844 | speed = clk_get_rate(sdd->src_clk) / 2 / (0 + 1); /* Max possible */ | 890 | if (!sci->clk_from_cmu) { |
845 | 891 | u32 psr, speed; | |
846 | if (spi->max_speed_hz > speed) | 892 | |
847 | spi->max_speed_hz = speed; | 893 | /* Max possible */ |
848 | 894 | speed = clk_get_rate(sdd->src_clk) / 2 / (0 + 1); | |
849 | psr = clk_get_rate(sdd->src_clk) / 2 / spi->max_speed_hz - 1; | 895 | |
850 | psr &= S3C64XX_SPI_PSR_MASK; | 896 | if (spi->max_speed_hz > speed) |
851 | if (psr == S3C64XX_SPI_PSR_MASK) | 897 | spi->max_speed_hz = speed; |
852 | psr--; | 898 | |
899 | psr = clk_get_rate(sdd->src_clk) / 2 / spi->max_speed_hz - 1; | ||
900 | psr &= S3C64XX_SPI_PSR_MASK; | ||
901 | if (psr == S3C64XX_SPI_PSR_MASK) | ||
902 | psr--; | ||
903 | |||
904 | speed = clk_get_rate(sdd->src_clk) / 2 / (psr + 1); | ||
905 | if (spi->max_speed_hz < speed) { | ||
906 | if (psr+1 < S3C64XX_SPI_PSR_MASK) { | ||
907 | psr++; | ||
908 | } else { | ||
909 | err = -EINVAL; | ||
910 | goto setup_exit; | ||
911 | } | ||
912 | } | ||
853 | 913 | ||
854 | speed = clk_get_rate(sdd->src_clk) / 2 / (psr + 1); | 914 | speed = clk_get_rate(sdd->src_clk) / 2 / (psr + 1); |
855 | if (spi->max_speed_hz < speed) { | 915 | if (spi->max_speed_hz >= speed) |
856 | if (psr+1 < S3C64XX_SPI_PSR_MASK) { | 916 | spi->max_speed_hz = speed; |
857 | psr++; | 917 | else |
858 | } else { | ||
859 | err = -EINVAL; | 918 | err = -EINVAL; |
860 | goto setup_exit; | ||
861 | } | ||
862 | } | 919 | } |
863 | 920 | ||
864 | speed = clk_get_rate(sdd->src_clk) / 2 / (psr + 1); | ||
865 | if (spi->max_speed_hz >= speed) | ||
866 | spi->max_speed_hz = speed; | ||
867 | else | ||
868 | err = -EINVAL; | ||
869 | |||
870 | setup_exit: | 921 | setup_exit: |
871 | 922 | ||
872 | /* setup() returns with device de-selected */ | 923 | /* setup() returns with device de-selected */ |
@@ -888,7 +939,8 @@ static void s3c64xx_spi_hwinit(struct s3c64xx_spi_driver_data *sdd, int channel) | |||
888 | /* Disable Interrupts - we use Polling if not DMA mode */ | 939 | /* Disable Interrupts - we use Polling if not DMA mode */ |
889 | writel(0, regs + S3C64XX_SPI_INT_EN); | 940 | writel(0, regs + S3C64XX_SPI_INT_EN); |
890 | 941 | ||
891 | writel(sci->src_clk_nr << S3C64XX_SPI_CLKSEL_SRCSHFT, | 942 | if (!sci->clk_from_cmu) |
943 | writel(sci->src_clk_nr << S3C64XX_SPI_CLKSEL_SRCSHFT, | ||
892 | regs + S3C64XX_SPI_CLK_CFG); | 944 | regs + S3C64XX_SPI_CLK_CFG); |
893 | writel(0, regs + S3C64XX_SPI_MODE_CFG); | 945 | writel(0, regs + S3C64XX_SPI_MODE_CFG); |
894 | writel(0, regs + S3C64XX_SPI_PACKET_CNT); | 946 | writel(0, regs + S3C64XX_SPI_PACKET_CNT); |
diff --git a/drivers/spi/spi_topcliff_pch.c b/drivers/spi/spi_topcliff_pch.c new file mode 100644 index 000000000000..58e187f45ec7 --- /dev/null +++ b/drivers/spi/spi_topcliff_pch.c | |||
@@ -0,0 +1,1303 @@ | |||
1 | /* | ||
2 | * SPI bus driver for the Topcliff PCH used by Intel SoCs | ||
3 | * | ||
4 | * Copyright (C) 2010 OKI SEMICONDUCTOR Co., LTD. | ||
5 | * | ||
6 | * This program is free software; you can redistribute it and/or modify | ||
7 | * it under the terms of the GNU General Public License as published by | ||
8 | * the Free Software Foundation; version 2 of the License. | ||
9 | * | ||
10 | * This program is distributed in the hope that it will be useful, | ||
11 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | ||
12 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | ||
13 | * GNU General Public License for more details. | ||
14 | * | ||
15 | * You should have received a copy of the GNU General Public License | ||
16 | * along with this program; if not, write to the Free Software | ||
17 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. | ||
18 | */ | ||
19 | |||
20 | #include <linux/delay.h> | ||
21 | #include <linux/pci.h> | ||
22 | #include <linux/wait.h> | ||
23 | #include <linux/spi/spi.h> | ||
24 | #include <linux/interrupt.h> | ||
25 | #include <linux/sched.h> | ||
26 | #include <linux/spi/spidev.h> | ||
27 | #include <linux/module.h> | ||
28 | #include <linux/device.h> | ||
29 | |||
30 | /* Register offsets */ | ||
31 | #define PCH_SPCR 0x00 /* SPI control register */ | ||
32 | #define PCH_SPBRR 0x04 /* SPI baud rate register */ | ||
33 | #define PCH_SPSR 0x08 /* SPI status register */ | ||
34 | #define PCH_SPDWR 0x0C /* SPI write data register */ | ||
35 | #define PCH_SPDRR 0x10 /* SPI read data register */ | ||
36 | #define PCH_SSNXCR 0x18 /* SSN Expand Control Register */ | ||
37 | #define PCH_SRST 0x1C /* SPI reset register */ | ||
38 | |||
39 | #define PCH_SPSR_TFD 0x000007C0 | ||
40 | #define PCH_SPSR_RFD 0x0000F800 | ||
41 | |||
42 | #define PCH_READABLE(x) (((x) & PCH_SPSR_RFD)>>11) | ||
43 | #define PCH_WRITABLE(x) (((x) & PCH_SPSR_TFD)>>6) | ||
44 | |||
45 | #define PCH_RX_THOLD 7 | ||
46 | #define PCH_RX_THOLD_MAX 15 | ||
47 | |||
48 | #define PCH_MAX_BAUDRATE 5000000 | ||
49 | #define PCH_MAX_FIFO_DEPTH 16 | ||
50 | |||
51 | #define STATUS_RUNNING 1 | ||
52 | #define STATUS_EXITING 2 | ||
53 | #define PCH_SLEEP_TIME 10 | ||
54 | |||
55 | #define PCH_ADDRESS_SIZE 0x20 | ||
56 | |||
57 | #define SSN_LOW 0x02U | ||
58 | #define SSN_NO_CONTROL 0x00U | ||
59 | #define PCH_MAX_CS 0xFF | ||
60 | #define PCI_DEVICE_ID_GE_SPI 0x8816 | ||
61 | |||
62 | #define SPCR_SPE_BIT (1 << 0) | ||
63 | #define SPCR_MSTR_BIT (1 << 1) | ||
64 | #define SPCR_LSBF_BIT (1 << 4) | ||
65 | #define SPCR_CPHA_BIT (1 << 5) | ||
66 | #define SPCR_CPOL_BIT (1 << 6) | ||
67 | #define SPCR_TFIE_BIT (1 << 8) | ||
68 | #define SPCR_RFIE_BIT (1 << 9) | ||
69 | #define SPCR_FIE_BIT (1 << 10) | ||
70 | #define SPCR_ORIE_BIT (1 << 11) | ||
71 | #define SPCR_MDFIE_BIT (1 << 12) | ||
72 | #define SPCR_FICLR_BIT (1 << 24) | ||
73 | #define SPSR_TFI_BIT (1 << 0) | ||
74 | #define SPSR_RFI_BIT (1 << 1) | ||
75 | #define SPSR_FI_BIT (1 << 2) | ||
76 | #define SPBRR_SIZE_BIT (1 << 10) | ||
77 | |||
78 | #define PCH_ALL (SPCR_TFIE_BIT|SPCR_RFIE_BIT|SPCR_FIE_BIT|SPCR_ORIE_BIT|SPCR_MDFIE_BIT) | ||
79 | |||
80 | #define SPCR_RFIC_FIELD 20 | ||
81 | #define SPCR_TFIC_FIELD 16 | ||
82 | |||
83 | #define SPSR_INT_BITS 0x1F | ||
84 | #define MASK_SPBRR_SPBR_BITS (~((1 << 10) - 1)) | ||
85 | #define MASK_RFIC_SPCR_BITS (~(0xf << 20)) | ||
86 | #define MASK_TFIC_SPCR_BITS (~(0xf000f << 12)) | ||
87 | |||
88 | #define PCH_CLOCK_HZ 50000000 | ||
89 | #define PCH_MAX_SPBR 1023 | ||
90 | |||
91 | |||
92 | /** | ||
93 | * struct pch_spi_data - Holds the SPI channel specific details | ||
94 | * @io_remap_addr: The remapped PCI base address | ||
95 | * @master: Pointer to the SPI master structure | ||
96 | * @work: Reference to work queue handler | ||
97 | * @wk: Workqueue for carrying out execution of the | ||
98 | * requests | ||
99 | * @wait: Wait queue for waking up upon receiving an | ||
100 | * interrupt. | ||
101 | * @transfer_complete: Status of SPI Transfer | ||
102 | * @bcurrent_msg_processing: Status flag for message processing | ||
103 | * @lock: Lock for protecting this structure | ||
104 | * @queue: SPI Message queue | ||
105 | * @status: Status of the SPI driver | ||
106 | * @bpw_len: Length of data to be transferred in bits per | ||
107 | * word | ||
108 | * @transfer_active: Flag showing active transfer | ||
109 | * @tx_index: Transmit data count; for bookkeeping during | ||
110 | * transfer | ||
111 | * @rx_index: Receive data count; for bookkeeping during | ||
112 | * transfer | ||
113 | * @tx_buff: Buffer for data to be transmitted | ||
114 | * @rx_index: Buffer for Received data | ||
115 | * @n_curnt_chip: The chip number that this SPI driver currently | ||
116 | * operates on | ||
117 | * @current_chip: Reference to the current chip that this SPI | ||
118 | * driver currently operates on | ||
119 | * @current_msg: The current message that this SPI driver is | ||
120 | * handling | ||
121 | * @cur_trans: The current transfer that this SPI driver is | ||
122 | * handling | ||
123 | * @board_dat: Reference to the SPI device data structure | ||
124 | */ | ||
125 | struct pch_spi_data { | ||
126 | void __iomem *io_remap_addr; | ||
127 | struct spi_master *master; | ||
128 | struct work_struct work; | ||
129 | struct workqueue_struct *wk; | ||
130 | wait_queue_head_t wait; | ||
131 | u8 transfer_complete; | ||
132 | u8 bcurrent_msg_processing; | ||
133 | spinlock_t lock; | ||
134 | struct list_head queue; | ||
135 | u8 status; | ||
136 | u32 bpw_len; | ||
137 | u8 transfer_active; | ||
138 | u32 tx_index; | ||
139 | u32 rx_index; | ||
140 | u16 *pkt_tx_buff; | ||
141 | u16 *pkt_rx_buff; | ||
142 | u8 n_curnt_chip; | ||
143 | struct spi_device *current_chip; | ||
144 | struct spi_message *current_msg; | ||
145 | struct spi_transfer *cur_trans; | ||
146 | struct pch_spi_board_data *board_dat; | ||
147 | }; | ||
148 | |||
149 | /** | ||
150 | * struct pch_spi_board_data - Holds the SPI device specific details | ||
151 | * @pdev: Pointer to the PCI device | ||
152 | * @irq_reg_sts: Status of IRQ registration | ||
153 | * @pci_req_sts: Status of pci_request_regions | ||
154 | * @suspend_sts: Status of suspend | ||
155 | * @data: Pointer to SPI channel data structure | ||
156 | */ | ||
157 | struct pch_spi_board_data { | ||
158 | struct pci_dev *pdev; | ||
159 | u8 irq_reg_sts; | ||
160 | u8 pci_req_sts; | ||
161 | u8 suspend_sts; | ||
162 | struct pch_spi_data *data; | ||
163 | }; | ||
164 | |||
165 | static struct pci_device_id pch_spi_pcidev_id[] = { | ||
166 | {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_GE_SPI)}, | ||
167 | {0,} | ||
168 | }; | ||
169 | |||
170 | /** | ||
171 | * pch_spi_writereg() - Performs register writes | ||
172 | * @master: Pointer to struct spi_master. | ||
173 | * @idx: Register offset. | ||
174 | * @val: Value to be written to register. | ||
175 | */ | ||
176 | static inline void pch_spi_writereg(struct spi_master *master, int idx, u32 val) | ||
177 | { | ||
178 | struct pch_spi_data *data = spi_master_get_devdata(master); | ||
179 | iowrite32(val, (data->io_remap_addr + idx)); | ||
180 | } | ||
181 | |||
182 | /** | ||
183 | * pch_spi_readreg() - Performs register reads | ||
184 | * @master: Pointer to struct spi_master. | ||
185 | * @idx: Register offset. | ||
186 | */ | ||
187 | static inline u32 pch_spi_readreg(struct spi_master *master, int idx) | ||
188 | { | ||
189 | struct pch_spi_data *data = spi_master_get_devdata(master); | ||
190 | return ioread32(data->io_remap_addr + idx); | ||
191 | } | ||
192 | |||
193 | static inline void pch_spi_setclr_reg(struct spi_master *master, int idx, | ||
194 | u32 set, u32 clr) | ||
195 | { | ||
196 | u32 tmp = pch_spi_readreg(master, idx); | ||
197 | tmp = (tmp & ~clr) | set; | ||
198 | pch_spi_writereg(master, idx, tmp); | ||
199 | } | ||
200 | |||
201 | static void pch_spi_set_master_mode(struct spi_master *master) | ||
202 | { | ||
203 | pch_spi_setclr_reg(master, PCH_SPCR, SPCR_MSTR_BIT, 0); | ||
204 | } | ||
205 | |||
206 | /** | ||
207 | * pch_spi_clear_fifo() - Clears the Transmit and Receive FIFOs | ||
208 | * @master: Pointer to struct spi_master. | ||
209 | */ | ||
210 | static void pch_spi_clear_fifo(struct spi_master *master) | ||
211 | { | ||
212 | pch_spi_setclr_reg(master, PCH_SPCR, SPCR_FICLR_BIT, 0); | ||
213 | pch_spi_setclr_reg(master, PCH_SPCR, 0, SPCR_FICLR_BIT); | ||
214 | } | ||
215 | |||
216 | static void pch_spi_handler_sub(struct pch_spi_data *data, u32 reg_spsr_val, | ||
217 | void __iomem *io_remap_addr) | ||
218 | { | ||
219 | u32 n_read, tx_index, rx_index, bpw_len; | ||
220 | u16 *pkt_rx_buffer, *pkt_tx_buff; | ||
221 | int read_cnt; | ||
222 | u32 reg_spcr_val; | ||
223 | void __iomem *spsr; | ||
224 | void __iomem *spdrr; | ||
225 | void __iomem *spdwr; | ||
226 | |||
227 | spsr = io_remap_addr + PCH_SPSR; | ||
228 | iowrite32(reg_spsr_val, spsr); | ||
229 | |||
230 | if (data->transfer_active) { | ||
231 | rx_index = data->rx_index; | ||
232 | tx_index = data->tx_index; | ||
233 | bpw_len = data->bpw_len; | ||
234 | pkt_rx_buffer = data->pkt_rx_buff; | ||
235 | pkt_tx_buff = data->pkt_tx_buff; | ||
236 | |||
237 | spdrr = io_remap_addr + PCH_SPDRR; | ||
238 | spdwr = io_remap_addr + PCH_SPDWR; | ||
239 | |||
240 | n_read = PCH_READABLE(reg_spsr_val); | ||
241 | |||
242 | for (read_cnt = 0; (read_cnt < n_read); read_cnt++) { | ||
243 | pkt_rx_buffer[rx_index++] = ioread32(spdrr); | ||
244 | if (tx_index < bpw_len) | ||
245 | iowrite32(pkt_tx_buff[tx_index++], spdwr); | ||
246 | } | ||
247 | |||
248 | /* disable RFI if not needed */ | ||
249 | if ((bpw_len - rx_index) <= PCH_MAX_FIFO_DEPTH) { | ||
250 | reg_spcr_val = ioread32(io_remap_addr + PCH_SPCR); | ||
251 | reg_spcr_val &= ~SPCR_RFIE_BIT; /* disable RFI */ | ||
252 | |||
253 | /* reset rx threshold */ | ||
254 | reg_spcr_val &= MASK_RFIC_SPCR_BITS; | ||
255 | reg_spcr_val |= (PCH_RX_THOLD_MAX << SPCR_RFIC_FIELD); | ||
256 | iowrite32(((reg_spcr_val) &= (~(SPCR_RFIE_BIT))), | ||
257 | (io_remap_addr + PCH_SPCR)); | ||
258 | } | ||
259 | |||
260 | /* update counts */ | ||
261 | data->tx_index = tx_index; | ||
262 | data->rx_index = rx_index; | ||
263 | |||
264 | } | ||
265 | |||
266 | /* if transfer complete interrupt */ | ||
267 | if (reg_spsr_val & SPSR_FI_BIT) { | ||
268 | /* disable FI & RFI interrupts */ | ||
269 | pch_spi_setclr_reg(data->master, PCH_SPCR, 0, | ||
270 | SPCR_FIE_BIT | SPCR_TFIE_BIT); | ||
271 | |||
272 | /* transfer is completed;inform pch_spi_process_messages */ | ||
273 | data->transfer_complete = true; | ||
274 | wake_up(&data->wait); | ||
275 | } | ||
276 | } | ||
277 | |||
278 | /** | ||
279 | * pch_spi_handler() - Interrupt handler | ||
280 | * @irq: The interrupt number. | ||
281 | * @dev_id: Pointer to struct pch_spi_board_data. | ||
282 | */ | ||
283 | static irqreturn_t pch_spi_handler(int irq, void *dev_id) | ||
284 | { | ||
285 | u32 reg_spsr_val; | ||
286 | struct pch_spi_data *data; | ||
287 | void __iomem *spsr; | ||
288 | void __iomem *io_remap_addr; | ||
289 | irqreturn_t ret = IRQ_NONE; | ||
290 | struct pch_spi_board_data *board_dat = dev_id; | ||
291 | |||
292 | if (board_dat->suspend_sts) { | ||
293 | dev_dbg(&board_dat->pdev->dev, | ||
294 | "%s returning due to suspend\n", __func__); | ||
295 | return IRQ_NONE; | ||
296 | } | ||
297 | |||
298 | data = board_dat->data; | ||
299 | io_remap_addr = data->io_remap_addr; | ||
300 | spsr = io_remap_addr + PCH_SPSR; | ||
301 | |||
302 | reg_spsr_val = ioread32(spsr); | ||
303 | |||
304 | /* Check if the interrupt is for SPI device */ | ||
305 | if (reg_spsr_val & (SPSR_FI_BIT | SPSR_RFI_BIT)) { | ||
306 | pch_spi_handler_sub(data, reg_spsr_val, io_remap_addr); | ||
307 | ret = IRQ_HANDLED; | ||
308 | } | ||
309 | |||
310 | dev_dbg(&board_dat->pdev->dev, "%s EXIT return value=%d\n", | ||
311 | __func__, ret); | ||
312 | |||
313 | return ret; | ||
314 | } | ||
315 | |||
316 | /** | ||
317 | * pch_spi_set_baud_rate() - Sets SPBR field in SPBRR | ||
318 | * @master: Pointer to struct spi_master. | ||
319 | * @speed_hz: Baud rate. | ||
320 | */ | ||
321 | static void pch_spi_set_baud_rate(struct spi_master *master, u32 speed_hz) | ||
322 | { | ||
323 | u32 n_spbr = PCH_CLOCK_HZ / (speed_hz * 2); | ||
324 | |||
325 | /* if baud rate is less than we can support limit it */ | ||
326 | if (n_spbr > PCH_MAX_SPBR) | ||
327 | n_spbr = PCH_MAX_SPBR; | ||
328 | |||
329 | pch_spi_setclr_reg(master, PCH_SPBRR, n_spbr, ~MASK_SPBRR_SPBR_BITS); | ||
330 | } | ||
331 | |||
332 | /** | ||
333 | * pch_spi_set_bits_per_word() - Sets SIZE field in SPBRR | ||
334 | * @master: Pointer to struct spi_master. | ||
335 | * @bits_per_word: Bits per word for SPI transfer. | ||
336 | */ | ||
337 | static void pch_spi_set_bits_per_word(struct spi_master *master, | ||
338 | u8 bits_per_word) | ||
339 | { | ||
340 | if (bits_per_word == 8) | ||
341 | pch_spi_setclr_reg(master, PCH_SPBRR, 0, SPBRR_SIZE_BIT); | ||
342 | else | ||
343 | pch_spi_setclr_reg(master, PCH_SPBRR, SPBRR_SIZE_BIT, 0); | ||
344 | } | ||
345 | |||
346 | /** | ||
347 | * pch_spi_setup_transfer() - Configures the PCH SPI hardware for transfer | ||
348 | * @spi: Pointer to struct spi_device. | ||
349 | */ | ||
350 | static void pch_spi_setup_transfer(struct spi_device *spi) | ||
351 | { | ||
352 | u32 flags = 0; | ||
353 | |||
354 | dev_dbg(&spi->dev, "%s SPBRR content =%x setting baud rate=%d\n", | ||
355 | __func__, pch_spi_readreg(spi->master, PCH_SPBRR), | ||
356 | spi->max_speed_hz); | ||
357 | pch_spi_set_baud_rate(spi->master, spi->max_speed_hz); | ||
358 | |||
359 | /* set bits per word */ | ||
360 | pch_spi_set_bits_per_word(spi->master, spi->bits_per_word); | ||
361 | |||
362 | if (!(spi->mode & SPI_LSB_FIRST)) | ||
363 | flags |= SPCR_LSBF_BIT; | ||
364 | if (spi->mode & SPI_CPOL) | ||
365 | flags |= SPCR_CPOL_BIT; | ||
366 | if (spi->mode & SPI_CPHA) | ||
367 | flags |= SPCR_CPHA_BIT; | ||
368 | pch_spi_setclr_reg(spi->master, PCH_SPCR, flags, | ||
369 | (SPCR_LSBF_BIT | SPCR_CPOL_BIT | SPCR_CPHA_BIT)); | ||
370 | |||
371 | /* Clear the FIFO by toggling FICLR to 1 and back to 0 */ | ||
372 | pch_spi_clear_fifo(spi->master); | ||
373 | } | ||
374 | |||
375 | /** | ||
376 | * pch_spi_reset() - Clears SPI registers | ||
377 | * @master: Pointer to struct spi_master. | ||
378 | */ | ||
379 | static void pch_spi_reset(struct spi_master *master) | ||
380 | { | ||
381 | /* write 1 to reset SPI */ | ||
382 | pch_spi_writereg(master, PCH_SRST, 0x1); | ||
383 | |||
384 | /* clear reset */ | ||
385 | pch_spi_writereg(master, PCH_SRST, 0x0); | ||
386 | } | ||
387 | |||
388 | static int pch_spi_setup(struct spi_device *pspi) | ||
389 | { | ||
390 | /* check bits per word */ | ||
391 | if (pspi->bits_per_word == 0) { | ||
392 | pspi->bits_per_word = 8; | ||
393 | dev_dbg(&pspi->dev, "%s 8 bits per word\n", __func__); | ||
394 | } | ||
395 | |||
396 | if ((pspi->bits_per_word != 8) && (pspi->bits_per_word != 16)) { | ||
397 | dev_err(&pspi->dev, "%s Invalid bits per word\n", __func__); | ||
398 | return -EINVAL; | ||
399 | } | ||
400 | |||
401 | /* Check baud rate setting */ | ||
402 | /* if baud rate of chip is greater than | ||
403 | max we can support,return error */ | ||
404 | if ((pspi->max_speed_hz) > PCH_MAX_BAUDRATE) | ||
405 | pspi->max_speed_hz = PCH_MAX_BAUDRATE; | ||
406 | |||
407 | dev_dbg(&pspi->dev, "%s MODE = %x\n", __func__, | ||
408 | (pspi->mode) & (SPI_CPOL | SPI_CPHA)); | ||
409 | |||
410 | return 0; | ||
411 | } | ||
412 | |||
413 | static int pch_spi_transfer(struct spi_device *pspi, struct spi_message *pmsg) | ||
414 | { | ||
415 | |||
416 | struct spi_transfer *transfer; | ||
417 | struct pch_spi_data *data = spi_master_get_devdata(pspi->master); | ||
418 | int retval; | ||
419 | unsigned long flags; | ||
420 | |||
421 | /* validate spi message and baud rate */ | ||
422 | if (unlikely(list_empty(&pmsg->transfers) == 1)) { | ||
423 | dev_err(&pspi->dev, "%s list empty\n", __func__); | ||
424 | retval = -EINVAL; | ||
425 | goto err_out; | ||
426 | } | ||
427 | |||
428 | if (unlikely(pspi->max_speed_hz == 0)) { | ||
429 | dev_err(&pspi->dev, "%s pch_spi_tranfer maxspeed=%d\n", | ||
430 | __func__, pspi->max_speed_hz); | ||
431 | retval = -EINVAL; | ||
432 | goto err_out; | ||
433 | } | ||
434 | |||
435 | dev_dbg(&pspi->dev, "%s Transfer List not empty. " | ||
436 | "Transfer Speed is set.\n", __func__); | ||
437 | |||
438 | /* validate Tx/Rx buffers and Transfer length */ | ||
439 | list_for_each_entry(transfer, &pmsg->transfers, transfer_list) { | ||
440 | if (!transfer->tx_buf && !transfer->rx_buf) { | ||
441 | dev_err(&pspi->dev, | ||
442 | "%s Tx and Rx buffer NULL\n", __func__); | ||
443 | retval = -EINVAL; | ||
444 | goto err_out; | ||
445 | } | ||
446 | |||
447 | if (!transfer->len) { | ||
448 | dev_err(&pspi->dev, "%s Transfer length invalid\n", | ||
449 | __func__); | ||
450 | retval = -EINVAL; | ||
451 | goto err_out; | ||
452 | } | ||
453 | |||
454 | dev_dbg(&pspi->dev, "%s Tx/Rx buffer valid. Transfer length" | ||
455 | " valid\n", __func__); | ||
456 | |||
457 | /* if baud rate hs been specified validate the same */ | ||
458 | if (transfer->speed_hz > PCH_MAX_BAUDRATE) | ||
459 | transfer->speed_hz = PCH_MAX_BAUDRATE; | ||
460 | |||
461 | /* if bits per word has been specified validate the same */ | ||
462 | if (transfer->bits_per_word) { | ||
463 | if ((transfer->bits_per_word != 8) | ||
464 | && (transfer->bits_per_word != 16)) { | ||
465 | retval = -EINVAL; | ||
466 | dev_err(&pspi->dev, | ||
467 | "%s Invalid bits per word\n", __func__); | ||
468 | goto err_out; | ||
469 | } | ||
470 | } | ||
471 | } | ||
472 | |||
473 | spin_lock_irqsave(&data->lock, flags); | ||
474 | |||
475 | /* We won't process any messages if we have been asked to terminate */ | ||
476 | if (data->status == STATUS_EXITING) { | ||
477 | dev_err(&pspi->dev, "%s status = STATUS_EXITING.\n", __func__); | ||
478 | retval = -ESHUTDOWN; | ||
479 | goto err_return_spinlock; | ||
480 | } | ||
481 | |||
482 | /* If suspended ,return -EINVAL */ | ||
483 | if (data->board_dat->suspend_sts) { | ||
484 | dev_err(&pspi->dev, "%s suspend; returning EINVAL\n", __func__); | ||
485 | retval = -EINVAL; | ||
486 | goto err_return_spinlock; | ||
487 | } | ||
488 | |||
489 | /* set status of message */ | ||
490 | pmsg->actual_length = 0; | ||
491 | dev_dbg(&pspi->dev, "%s - pmsg->status =%d\n", __func__, pmsg->status); | ||
492 | |||
493 | pmsg->status = -EINPROGRESS; | ||
494 | |||
495 | /* add message to queue */ | ||
496 | list_add_tail(&pmsg->queue, &data->queue); | ||
497 | dev_dbg(&pspi->dev, "%s - Invoked list_add_tail\n", __func__); | ||
498 | |||
499 | /* schedule work queue to run */ | ||
500 | queue_work(data->wk, &data->work); | ||
501 | dev_dbg(&pspi->dev, "%s - Invoked queue work\n", __func__); | ||
502 | |||
503 | retval = 0; | ||
504 | |||
505 | err_return_spinlock: | ||
506 | spin_unlock_irqrestore(&data->lock, flags); | ||
507 | err_out: | ||
508 | dev_dbg(&pspi->dev, "%s RETURN=%d\n", __func__, retval); | ||
509 | return retval; | ||
510 | } | ||
511 | |||
512 | static inline void pch_spi_select_chip(struct pch_spi_data *data, | ||
513 | struct spi_device *pspi) | ||
514 | { | ||
515 | if (data->current_chip != NULL) { | ||
516 | if (pspi->chip_select != data->n_curnt_chip) { | ||
517 | dev_dbg(&pspi->dev, "%s : different slave\n", __func__); | ||
518 | data->current_chip = NULL; | ||
519 | } | ||
520 | } | ||
521 | |||
522 | data->current_chip = pspi; | ||
523 | |||
524 | data->n_curnt_chip = data->current_chip->chip_select; | ||
525 | |||
526 | dev_dbg(&pspi->dev, "%s :Invoking pch_spi_setup_transfer\n", __func__); | ||
527 | pch_spi_setup_transfer(pspi); | ||
528 | } | ||
529 | |||
530 | static void pch_spi_set_tx(struct pch_spi_data *data, int *bpw, | ||
531 | struct spi_message **ppmsg) | ||
532 | { | ||
533 | int size; | ||
534 | u32 n_writes; | ||
535 | int j; | ||
536 | struct spi_message *pmsg; | ||
537 | const u8 *tx_buf; | ||
538 | const u16 *tx_sbuf; | ||
539 | |||
540 | pmsg = *ppmsg; | ||
541 | |||
542 | /* set baud rate if needed */ | ||
543 | if (data->cur_trans->speed_hz) { | ||
544 | dev_dbg(&data->master->dev, "%s:setting baud rate\n", __func__); | ||
545 | pch_spi_set_baud_rate(data->master, data->cur_trans->speed_hz); | ||
546 | } | ||
547 | |||
548 | /* set bits per word if needed */ | ||
549 | if (data->cur_trans->bits_per_word && | ||
550 | (data->current_msg->spi->bits_per_word != data->cur_trans->bits_per_word)) { | ||
551 | dev_dbg(&data->master->dev, "%s:set bits per word\n", __func__); | ||
552 | pch_spi_set_bits_per_word(data->master, | ||
553 | data->cur_trans->bits_per_word); | ||
554 | *bpw = data->cur_trans->bits_per_word; | ||
555 | } else { | ||
556 | *bpw = data->current_msg->spi->bits_per_word; | ||
557 | } | ||
558 | |||
559 | /* reset Tx/Rx index */ | ||
560 | data->tx_index = 0; | ||
561 | data->rx_index = 0; | ||
562 | |||
563 | data->bpw_len = data->cur_trans->len / (*bpw / 8); | ||
564 | |||
565 | /* find alloc size */ | ||
566 | size = data->cur_trans->len * sizeof(*data->pkt_tx_buff); | ||
567 | |||
568 | /* allocate memory for pkt_tx_buff & pkt_rx_buffer */ | ||
569 | data->pkt_tx_buff = kzalloc(size, GFP_KERNEL); | ||
570 | if (data->pkt_tx_buff != NULL) { | ||
571 | data->pkt_rx_buff = kzalloc(size, GFP_KERNEL); | ||
572 | if (!data->pkt_rx_buff) | ||
573 | kfree(data->pkt_tx_buff); | ||
574 | } | ||
575 | |||
576 | if (!data->pkt_rx_buff) { | ||
577 | /* flush queue and set status of all transfers to -ENOMEM */ | ||
578 | dev_err(&data->master->dev, "%s :kzalloc failed\n", __func__); | ||
579 | list_for_each_entry(pmsg, data->queue.next, queue) { | ||
580 | pmsg->status = -ENOMEM; | ||
581 | |||
582 | if (pmsg->complete != 0) | ||
583 | pmsg->complete(pmsg->context); | ||
584 | |||
585 | /* delete from queue */ | ||
586 | list_del_init(&pmsg->queue); | ||
587 | } | ||
588 | return; | ||
589 | } | ||
590 | |||
591 | /* copy Tx Data */ | ||
592 | if (data->cur_trans->tx_buf != NULL) { | ||
593 | if (*bpw == 8) { | ||
594 | tx_buf = data->cur_trans->tx_buf; | ||
595 | for (j = 0; j < data->bpw_len; j++) | ||
596 | data->pkt_tx_buff[j] = *tx_buf++; | ||
597 | } else { | ||
598 | tx_sbuf = data->cur_trans->tx_buf; | ||
599 | for (j = 0; j < data->bpw_len; j++) | ||
600 | data->pkt_tx_buff[j] = *tx_sbuf++; | ||
601 | } | ||
602 | } | ||
603 | |||
604 | /* if len greater than PCH_MAX_FIFO_DEPTH, write 16,else len bytes */ | ||
605 | n_writes = data->bpw_len; | ||
606 | if (n_writes > PCH_MAX_FIFO_DEPTH) | ||
607 | n_writes = PCH_MAX_FIFO_DEPTH; | ||
608 | |||
609 | dev_dbg(&data->master->dev, "\n%s:Pulling down SSN low - writing " | ||
610 | "0x2 to SSNXCR\n", __func__); | ||
611 | pch_spi_writereg(data->master, PCH_SSNXCR, SSN_LOW); | ||
612 | |||
613 | for (j = 0; j < n_writes; j++) | ||
614 | pch_spi_writereg(data->master, PCH_SPDWR, data->pkt_tx_buff[j]); | ||
615 | |||
616 | /* update tx_index */ | ||
617 | data->tx_index = j; | ||
618 | |||
619 | /* reset transfer complete flag */ | ||
620 | data->transfer_complete = false; | ||
621 | data->transfer_active = true; | ||
622 | } | ||
623 | |||
624 | |||
625 | static void pch_spi_nomore_transfer(struct pch_spi_data *data, | ||
626 | struct spi_message *pmsg) | ||
627 | { | ||
628 | dev_dbg(&data->master->dev, "%s called\n", __func__); | ||
629 | /* Invoke complete callback | ||
630 | * [To the spi core..indicating end of transfer] */ | ||
631 | data->current_msg->status = 0; | ||
632 | |||
633 | if (data->current_msg->complete != 0) { | ||
634 | dev_dbg(&data->master->dev, | ||
635 | "%s:Invoking callback of SPI core\n", __func__); | ||
636 | data->current_msg->complete(data->current_msg->context); | ||
637 | } | ||
638 | |||
639 | /* update status in global variable */ | ||
640 | data->bcurrent_msg_processing = false; | ||
641 | |||
642 | dev_dbg(&data->master->dev, | ||
643 | "%s:data->bcurrent_msg_processing = false\n", __func__); | ||
644 | |||
645 | data->current_msg = NULL; | ||
646 | data->cur_trans = NULL; | ||
647 | |||
648 | /* check if we have items in list and not suspending | ||
649 | * return 1 if list empty */ | ||
650 | if ((list_empty(&data->queue) == 0) && | ||
651 | (!data->board_dat->suspend_sts) && | ||
652 | (data->status != STATUS_EXITING)) { | ||
653 | /* We have some more work to do (either there is more tranint | ||
654 | * bpw;sfer requests in the current message or there are | ||
655 | *more messages) | ||
656 | */ | ||
657 | dev_dbg(&data->master->dev, "%s:Invoke queue_work\n", __func__); | ||
658 | queue_work(data->wk, &data->work); | ||
659 | } else if (data->board_dat->suspend_sts || | ||
660 | data->status == STATUS_EXITING) { | ||
661 | dev_dbg(&data->master->dev, | ||
662 | "%s suspend/remove initiated, flushing queue\n", | ||
663 | __func__); | ||
664 | list_for_each_entry(pmsg, data->queue.next, queue) { | ||
665 | pmsg->status = -EIO; | ||
666 | |||
667 | if (pmsg->complete) | ||
668 | pmsg->complete(pmsg->context); | ||
669 | |||
670 | /* delete from queue */ | ||
671 | list_del_init(&pmsg->queue); | ||
672 | } | ||
673 | } | ||
674 | } | ||
675 | |||
676 | static void pch_spi_set_ir(struct pch_spi_data *data) | ||
677 | { | ||
678 | /* enable interrupts */ | ||
679 | if ((data->bpw_len) > PCH_MAX_FIFO_DEPTH) { | ||
680 | /* set receive threhold to PCH_RX_THOLD */ | ||
681 | pch_spi_setclr_reg(data->master, PCH_SPCR, | ||
682 | PCH_RX_THOLD << SPCR_TFIC_FIELD, | ||
683 | ~MASK_TFIC_SPCR_BITS); | ||
684 | /* enable FI and RFI interrupts */ | ||
685 | pch_spi_setclr_reg(data->master, PCH_SPCR, | ||
686 | SPCR_RFIE_BIT | SPCR_TFIE_BIT, 0); | ||
687 | } else { | ||
688 | /* set receive threhold to maximum */ | ||
689 | pch_spi_setclr_reg(data->master, PCH_SPCR, | ||
690 | PCH_RX_THOLD_MAX << SPCR_TFIC_FIELD, | ||
691 | ~MASK_TFIC_SPCR_BITS); | ||
692 | /* enable FI interrupt */ | ||
693 | pch_spi_setclr_reg(data->master, PCH_SPCR, SPCR_FIE_BIT, 0); | ||
694 | } | ||
695 | |||
696 | dev_dbg(&data->master->dev, | ||
697 | "%s:invoking pch_spi_set_enable to enable SPI\n", __func__); | ||
698 | |||
699 | /* SPI set enable */ | ||
700 | pch_spi_setclr_reg(data->current_chip->master, PCH_SPCR, SPCR_SPE_BIT, 0); | ||
701 | |||
702 | /* Wait until the transfer completes; go to sleep after | ||
703 | initiating the transfer. */ | ||
704 | dev_dbg(&data->master->dev, | ||
705 | "%s:waiting for transfer to get over\n", __func__); | ||
706 | |||
707 | wait_event_interruptible(data->wait, data->transfer_complete); | ||
708 | |||
709 | pch_spi_writereg(data->master, PCH_SSNXCR, SSN_NO_CONTROL); | ||
710 | dev_dbg(&data->master->dev, | ||
711 | "%s:no more control over SSN-writing 0 to SSNXCR.", __func__); | ||
712 | |||
713 | data->transfer_active = false; | ||
714 | dev_dbg(&data->master->dev, | ||
715 | "%s set data->transfer_active = false\n", __func__); | ||
716 | |||
717 | /* clear all interrupts */ | ||
718 | pch_spi_writereg(data->master, PCH_SPSR, | ||
719 | pch_spi_readreg(data->master, PCH_SPSR)); | ||
720 | /* disable interrupts */ | ||
721 | pch_spi_setclr_reg(data->master, PCH_SPCR, 0, PCH_ALL); | ||
722 | } | ||
723 | |||
724 | static void pch_spi_copy_rx_data(struct pch_spi_data *data, int bpw) | ||
725 | { | ||
726 | int j; | ||
727 | u8 *rx_buf; | ||
728 | u16 *rx_sbuf; | ||
729 | |||
730 | /* copy Rx Data */ | ||
731 | if (!data->cur_trans->rx_buf) | ||
732 | return; | ||
733 | |||
734 | if (bpw == 8) { | ||
735 | rx_buf = data->cur_trans->rx_buf; | ||
736 | for (j = 0; j < data->bpw_len; j++) | ||
737 | *rx_buf++ = data->pkt_rx_buff[j] & 0xFF; | ||
738 | } else { | ||
739 | rx_sbuf = data->cur_trans->rx_buf; | ||
740 | for (j = 0; j < data->bpw_len; j++) | ||
741 | *rx_sbuf++ = data->pkt_rx_buff[j]; | ||
742 | } | ||
743 | } | ||
744 | |||
745 | |||
746 | static void pch_spi_process_messages(struct work_struct *pwork) | ||
747 | { | ||
748 | struct spi_message *pmsg; | ||
749 | struct pch_spi_data *data; | ||
750 | int bpw; | ||
751 | |||
752 | data = container_of(pwork, struct pch_spi_data, work); | ||
753 | dev_dbg(&data->master->dev, "%s data initialized\n", __func__); | ||
754 | |||
755 | spin_lock(&data->lock); | ||
756 | |||
757 | /* check if suspend has been initiated;if yes flush queue */ | ||
758 | if (data->board_dat->suspend_sts || (data->status == STATUS_EXITING)) { | ||
759 | dev_dbg(&data->master->dev, | ||
760 | "%s suspend/remove initiated,flushing queue\n", | ||
761 | __func__); | ||
762 | |||
763 | list_for_each_entry(pmsg, data->queue.next, queue) { | ||
764 | pmsg->status = -EIO; | ||
765 | |||
766 | if (pmsg->complete != 0) { | ||
767 | spin_unlock(&data->lock); | ||
768 | pmsg->complete(pmsg->context); | ||
769 | spin_lock(&data->lock); | ||
770 | } | ||
771 | |||
772 | /* delete from queue */ | ||
773 | list_del_init(&pmsg->queue); | ||
774 | } | ||
775 | |||
776 | spin_unlock(&data->lock); | ||
777 | return; | ||
778 | } | ||
779 | |||
780 | data->bcurrent_msg_processing = true; | ||
781 | dev_dbg(&data->master->dev, | ||
782 | "%s Set data->bcurrent_msg_processing= true\n", __func__); | ||
783 | |||
784 | /* Get the message from the queue and delete it from there. */ | ||
785 | data->current_msg = list_entry(data->queue.next, struct spi_message, | ||
786 | queue); | ||
787 | |||
788 | list_del_init(&data->current_msg->queue); | ||
789 | |||
790 | data->current_msg->status = 0; | ||
791 | |||
792 | pch_spi_select_chip(data, data->current_msg->spi); | ||
793 | |||
794 | spin_unlock(&data->lock); | ||
795 | |||
796 | do { | ||
797 | /* If we are already processing a message get the next | ||
798 | transfer structure from the message otherwise retrieve | ||
799 | the 1st transfer request from the message. */ | ||
800 | spin_lock(&data->lock); | ||
801 | |||
802 | if (data->cur_trans == NULL) { | ||
803 | data->cur_trans = | ||
804 | list_entry(data->current_msg->transfers. | ||
805 | next, struct spi_transfer, | ||
806 | transfer_list); | ||
807 | dev_dbg(&data->master->dev, | ||
808 | "%s :Getting 1st transfer message\n", __func__); | ||
809 | } else { | ||
810 | data->cur_trans = | ||
811 | list_entry(data->cur_trans->transfer_list.next, | ||
812 | struct spi_transfer, | ||
813 | transfer_list); | ||
814 | dev_dbg(&data->master->dev, | ||
815 | "%s :Getting next transfer message\n", | ||
816 | __func__); | ||
817 | } | ||
818 | |||
819 | spin_unlock(&data->lock); | ||
820 | |||
821 | pch_spi_set_tx(data, &bpw, &pmsg); | ||
822 | |||
823 | /* Control interrupt*/ | ||
824 | pch_spi_set_ir(data); | ||
825 | |||
826 | /* Disable SPI transfer */ | ||
827 | pch_spi_setclr_reg(data->current_chip->master, PCH_SPCR, 0, | ||
828 | SPCR_SPE_BIT); | ||
829 | |||
830 | /* clear FIFO */ | ||
831 | pch_spi_clear_fifo(data->master); | ||
832 | |||
833 | /* copy Rx Data */ | ||
834 | pch_spi_copy_rx_data(data, bpw); | ||
835 | |||
836 | /* free memory */ | ||
837 | kfree(data->pkt_rx_buff); | ||
838 | data->pkt_rx_buff = NULL; | ||
839 | |||
840 | kfree(data->pkt_tx_buff); | ||
841 | data->pkt_tx_buff = NULL; | ||
842 | |||
843 | /* increment message count */ | ||
844 | data->current_msg->actual_length += data->cur_trans->len; | ||
845 | |||
846 | dev_dbg(&data->master->dev, | ||
847 | "%s:data->current_msg->actual_length=%d\n", | ||
848 | __func__, data->current_msg->actual_length); | ||
849 | |||
850 | /* check for delay */ | ||
851 | if (data->cur_trans->delay_usecs) { | ||
852 | dev_dbg(&data->master->dev, "%s:" | ||
853 | "delay in usec=%d\n", __func__, | ||
854 | data->cur_trans->delay_usecs); | ||
855 | udelay(data->cur_trans->delay_usecs); | ||
856 | } | ||
857 | |||
858 | spin_lock(&data->lock); | ||
859 | |||
860 | /* No more transfer in this message. */ | ||
861 | if ((data->cur_trans->transfer_list.next) == | ||
862 | &(data->current_msg->transfers)) { | ||
863 | pch_spi_nomore_transfer(data, pmsg); | ||
864 | } | ||
865 | |||
866 | spin_unlock(&data->lock); | ||
867 | |||
868 | } while (data->cur_trans != NULL); | ||
869 | } | ||
870 | |||
871 | static void pch_spi_free_resources(struct pch_spi_board_data *board_dat) | ||
872 | { | ||
873 | dev_dbg(&board_dat->pdev->dev, "%s ENTRY\n", __func__); | ||
874 | |||
875 | /* free workqueue */ | ||
876 | if (board_dat->data->wk != NULL) { | ||
877 | destroy_workqueue(board_dat->data->wk); | ||
878 | board_dat->data->wk = NULL; | ||
879 | dev_dbg(&board_dat->pdev->dev, | ||
880 | "%s destroy_workqueue invoked successfully\n", | ||
881 | __func__); | ||
882 | } | ||
883 | |||
884 | /* disable interrupts & free IRQ */ | ||
885 | if (board_dat->irq_reg_sts) { | ||
886 | /* disable interrupts */ | ||
887 | pch_spi_setclr_reg(board_dat->data->master, PCH_SPCR, 0, | ||
888 | PCH_ALL); | ||
889 | |||
890 | /* free IRQ */ | ||
891 | free_irq(board_dat->pdev->irq, board_dat); | ||
892 | |||
893 | dev_dbg(&board_dat->pdev->dev, | ||
894 | "%s free_irq invoked successfully\n", __func__); | ||
895 | |||
896 | board_dat->irq_reg_sts = false; | ||
897 | } | ||
898 | |||
899 | /* unmap PCI base address */ | ||
900 | if (board_dat->data->io_remap_addr != 0) { | ||
901 | pci_iounmap(board_dat->pdev, board_dat->data->io_remap_addr); | ||
902 | |||
903 | board_dat->data->io_remap_addr = 0; | ||
904 | |||
905 | dev_dbg(&board_dat->pdev->dev, | ||
906 | "%s pci_iounmap invoked successfully\n", __func__); | ||
907 | } | ||
908 | |||
909 | /* release PCI region */ | ||
910 | if (board_dat->pci_req_sts) { | ||
911 | pci_release_regions(board_dat->pdev); | ||
912 | dev_dbg(&board_dat->pdev->dev, | ||
913 | "%s pci_release_regions invoked successfully\n", | ||
914 | __func__); | ||
915 | board_dat->pci_req_sts = false; | ||
916 | } | ||
917 | } | ||
918 | |||
919 | static int pch_spi_get_resources(struct pch_spi_board_data *board_dat) | ||
920 | { | ||
921 | void __iomem *io_remap_addr; | ||
922 | int retval; | ||
923 | dev_dbg(&board_dat->pdev->dev, "%s ENTRY\n", __func__); | ||
924 | |||
925 | /* create workqueue */ | ||
926 | board_dat->data->wk = create_singlethread_workqueue(KBUILD_MODNAME); | ||
927 | if (!board_dat->data->wk) { | ||
928 | dev_err(&board_dat->pdev->dev, | ||
929 | "%s create_singlet hread_workqueue failed\n", __func__); | ||
930 | retval = -EBUSY; | ||
931 | goto err_return; | ||
932 | } | ||
933 | |||
934 | dev_dbg(&board_dat->pdev->dev, | ||
935 | "%s create_singlethread_workqueue success\n", __func__); | ||
936 | |||
937 | retval = pci_request_regions(board_dat->pdev, KBUILD_MODNAME); | ||
938 | if (retval != 0) { | ||
939 | dev_err(&board_dat->pdev->dev, | ||
940 | "%s request_region failed\n", __func__); | ||
941 | goto err_return; | ||
942 | } | ||
943 | |||
944 | board_dat->pci_req_sts = true; | ||
945 | |||
946 | io_remap_addr = pci_iomap(board_dat->pdev, 1, 0); | ||
947 | if (io_remap_addr == 0) { | ||
948 | dev_err(&board_dat->pdev->dev, | ||
949 | "%s pci_iomap failed\n", __func__); | ||
950 | retval = -ENOMEM; | ||
951 | goto err_return; | ||
952 | } | ||
953 | |||
954 | /* calculate base address for all channels */ | ||
955 | board_dat->data->io_remap_addr = io_remap_addr; | ||
956 | |||
957 | /* reset PCH SPI h/w */ | ||
958 | pch_spi_reset(board_dat->data->master); | ||
959 | dev_dbg(&board_dat->pdev->dev, | ||
960 | "%s pch_spi_reset invoked successfully\n", __func__); | ||
961 | |||
962 | /* register IRQ */ | ||
963 | retval = request_irq(board_dat->pdev->irq, pch_spi_handler, | ||
964 | IRQF_SHARED, KBUILD_MODNAME, board_dat); | ||
965 | if (retval != 0) { | ||
966 | dev_err(&board_dat->pdev->dev, | ||
967 | "%s request_irq failed\n", __func__); | ||
968 | goto err_return; | ||
969 | } | ||
970 | |||
971 | dev_dbg(&board_dat->pdev->dev, "%s request_irq returned=%d\n", | ||
972 | __func__, retval); | ||
973 | |||
974 | board_dat->irq_reg_sts = true; | ||
975 | dev_dbg(&board_dat->pdev->dev, "%s data->irq_reg_sts=true\n", __func__); | ||
976 | |||
977 | err_return: | ||
978 | if (retval != 0) { | ||
979 | dev_err(&board_dat->pdev->dev, | ||
980 | "%s FAIL:invoking pch_spi_free_resources\n", __func__); | ||
981 | pch_spi_free_resources(board_dat); | ||
982 | } | ||
983 | |||
984 | dev_dbg(&board_dat->pdev->dev, "%s Return=%d\n", __func__, retval); | ||
985 | |||
986 | return retval; | ||
987 | } | ||
988 | |||
989 | static int pch_spi_probe(struct pci_dev *pdev, const struct pci_device_id *id) | ||
990 | { | ||
991 | |||
992 | struct spi_master *master; | ||
993 | |||
994 | struct pch_spi_board_data *board_dat; | ||
995 | int retval; | ||
996 | |||
997 | dev_dbg(&pdev->dev, "%s ENTRY\n", __func__); | ||
998 | |||
999 | /* allocate memory for private data */ | ||
1000 | board_dat = kzalloc(sizeof(struct pch_spi_board_data), GFP_KERNEL); | ||
1001 | if (board_dat == NULL) { | ||
1002 | dev_err(&pdev->dev, | ||
1003 | " %s memory allocation for private data failed\n", | ||
1004 | __func__); | ||
1005 | retval = -ENOMEM; | ||
1006 | goto err_kmalloc; | ||
1007 | } | ||
1008 | |||
1009 | dev_dbg(&pdev->dev, | ||
1010 | "%s memory allocation for private data success\n", __func__); | ||
1011 | |||
1012 | /* enable PCI device */ | ||
1013 | retval = pci_enable_device(pdev); | ||
1014 | if (retval != 0) { | ||
1015 | dev_err(&pdev->dev, "%s pci_enable_device FAILED\n", __func__); | ||
1016 | |||
1017 | goto err_pci_en_device; | ||
1018 | } | ||
1019 | |||
1020 | dev_dbg(&pdev->dev, "%s pci_enable_device returned=%d\n", | ||
1021 | __func__, retval); | ||
1022 | |||
1023 | board_dat->pdev = pdev; | ||
1024 | |||
1025 | /* alllocate memory for SPI master */ | ||
1026 | master = spi_alloc_master(&pdev->dev, sizeof(struct pch_spi_data)); | ||
1027 | if (master == NULL) { | ||
1028 | retval = -ENOMEM; | ||
1029 | dev_err(&pdev->dev, "%s Fail.\n", __func__); | ||
1030 | goto err_spi_alloc_master; | ||
1031 | } | ||
1032 | |||
1033 | dev_dbg(&pdev->dev, | ||
1034 | "%s spi_alloc_master returned non NULL\n", __func__); | ||
1035 | |||
1036 | /* initialize members of SPI master */ | ||
1037 | master->bus_num = -1; | ||
1038 | master->num_chipselect = PCH_MAX_CS; | ||
1039 | master->setup = pch_spi_setup; | ||
1040 | master->transfer = pch_spi_transfer; | ||
1041 | dev_dbg(&pdev->dev, | ||
1042 | "%s transfer member of SPI master initialized\n", __func__); | ||
1043 | |||
1044 | board_dat->data = spi_master_get_devdata(master); | ||
1045 | |||
1046 | board_dat->data->master = master; | ||
1047 | board_dat->data->n_curnt_chip = 255; | ||
1048 | board_dat->data->board_dat = board_dat; | ||
1049 | board_dat->data->status = STATUS_RUNNING; | ||
1050 | |||
1051 | INIT_LIST_HEAD(&board_dat->data->queue); | ||
1052 | spin_lock_init(&board_dat->data->lock); | ||
1053 | INIT_WORK(&board_dat->data->work, pch_spi_process_messages); | ||
1054 | init_waitqueue_head(&board_dat->data->wait); | ||
1055 | |||
1056 | /* allocate resources for PCH SPI */ | ||
1057 | retval = pch_spi_get_resources(board_dat); | ||
1058 | if (retval) { | ||
1059 | dev_err(&pdev->dev, "%s fail(retval=%d)\n", __func__, retval); | ||
1060 | goto err_spi_get_resources; | ||
1061 | } | ||
1062 | |||
1063 | dev_dbg(&pdev->dev, "%s pch_spi_get_resources returned=%d\n", | ||
1064 | __func__, retval); | ||
1065 | |||
1066 | /* save private data in dev */ | ||
1067 | pci_set_drvdata(pdev, board_dat); | ||
1068 | dev_dbg(&pdev->dev, "%s invoked pci_set_drvdata\n", __func__); | ||
1069 | |||
1070 | /* set master mode */ | ||
1071 | pch_spi_set_master_mode(master); | ||
1072 | dev_dbg(&pdev->dev, | ||
1073 | "%s invoked pch_spi_set_master_mode\n", __func__); | ||
1074 | |||
1075 | /* Register the controller with the SPI core. */ | ||
1076 | retval = spi_register_master(master); | ||
1077 | if (retval != 0) { | ||
1078 | dev_err(&pdev->dev, | ||
1079 | "%s spi_register_master FAILED\n", __func__); | ||
1080 | goto err_spi_reg_master; | ||
1081 | } | ||
1082 | |||
1083 | dev_dbg(&pdev->dev, "%s spi_register_master returned=%d\n", | ||
1084 | __func__, retval); | ||
1085 | |||
1086 | |||
1087 | return 0; | ||
1088 | |||
1089 | err_spi_reg_master: | ||
1090 | spi_unregister_master(master); | ||
1091 | err_spi_get_resources: | ||
1092 | err_spi_alloc_master: | ||
1093 | spi_master_put(master); | ||
1094 | pci_disable_device(pdev); | ||
1095 | err_pci_en_device: | ||
1096 | kfree(board_dat); | ||
1097 | err_kmalloc: | ||
1098 | return retval; | ||
1099 | } | ||
1100 | |||
1101 | static void pch_spi_remove(struct pci_dev *pdev) | ||
1102 | { | ||
1103 | struct pch_spi_board_data *board_dat = pci_get_drvdata(pdev); | ||
1104 | int count; | ||
1105 | |||
1106 | dev_dbg(&pdev->dev, "%s ENTRY\n", __func__); | ||
1107 | |||
1108 | if (!board_dat) { | ||
1109 | dev_err(&pdev->dev, | ||
1110 | "%s pci_get_drvdata returned NULL\n", __func__); | ||
1111 | return; | ||
1112 | } | ||
1113 | |||
1114 | /* check for any pending messages; no action is taken if the queue | ||
1115 | * is still full; but at least we tried. Unload anyway */ | ||
1116 | count = 500; | ||
1117 | spin_lock(&board_dat->data->lock); | ||
1118 | board_dat->data->status = STATUS_EXITING; | ||
1119 | while ((list_empty(&board_dat->data->queue) == 0) && --count) { | ||
1120 | dev_dbg(&board_dat->pdev->dev, "%s :queue not empty\n", | ||
1121 | __func__); | ||
1122 | spin_unlock(&board_dat->data->lock); | ||
1123 | msleep(PCH_SLEEP_TIME); | ||
1124 | spin_lock(&board_dat->data->lock); | ||
1125 | } | ||
1126 | spin_unlock(&board_dat->data->lock); | ||
1127 | |||
1128 | /* Free resources allocated for PCH SPI */ | ||
1129 | pch_spi_free_resources(board_dat); | ||
1130 | |||
1131 | spi_unregister_master(board_dat->data->master); | ||
1132 | |||
1133 | /* free memory for private data */ | ||
1134 | kfree(board_dat); | ||
1135 | |||
1136 | pci_set_drvdata(pdev, NULL); | ||
1137 | |||
1138 | /* disable PCI device */ | ||
1139 | pci_disable_device(pdev); | ||
1140 | |||
1141 | dev_dbg(&pdev->dev, "%s invoked pci_disable_device\n", __func__); | ||
1142 | } | ||
1143 | |||
1144 | #ifdef CONFIG_PM | ||
1145 | static int pch_spi_suspend(struct pci_dev *pdev, pm_message_t state) | ||
1146 | { | ||
1147 | u8 count; | ||
1148 | int retval; | ||
1149 | |||
1150 | struct pch_spi_board_data *board_dat = pci_get_drvdata(pdev); | ||
1151 | |||
1152 | dev_dbg(&pdev->dev, "%s ENTRY\n", __func__); | ||
1153 | |||
1154 | if (!board_dat) { | ||
1155 | dev_err(&pdev->dev, | ||
1156 | "%s pci_get_drvdata returned NULL\n", __func__); | ||
1157 | return -EFAULT; | ||
1158 | } | ||
1159 | |||
1160 | retval = 0; | ||
1161 | board_dat->suspend_sts = true; | ||
1162 | |||
1163 | /* check if the current message is processed: | ||
1164 | Only after thats done the transfer will be suspended */ | ||
1165 | count = 255; | ||
1166 | while ((--count) > 0) { | ||
1167 | if (!(board_dat->data->bcurrent_msg_processing)) { | ||
1168 | dev_dbg(&pdev->dev, "%s board_dat->data->bCurrent_" | ||
1169 | "msg_processing = false\n", __func__); | ||
1170 | break; | ||
1171 | } else { | ||
1172 | dev_dbg(&pdev->dev, "%s board_dat->data->bCurrent_msg_" | ||
1173 | "processing = true\n", __func__); | ||
1174 | } | ||
1175 | msleep(PCH_SLEEP_TIME); | ||
1176 | } | ||
1177 | |||
1178 | /* Free IRQ */ | ||
1179 | if (board_dat->irq_reg_sts) { | ||
1180 | /* disable all interrupts */ | ||
1181 | pch_spi_setclr_reg(board_dat->data->master, PCH_SPCR, 0, | ||
1182 | PCH_ALL); | ||
1183 | pch_spi_reset(board_dat->data->master); | ||
1184 | |||
1185 | free_irq(board_dat->pdev->irq, board_dat); | ||
1186 | |||
1187 | board_dat->irq_reg_sts = false; | ||
1188 | dev_dbg(&pdev->dev, | ||
1189 | "%s free_irq invoked successfully.\n", __func__); | ||
1190 | } | ||
1191 | |||
1192 | /* save config space */ | ||
1193 | retval = pci_save_state(pdev); | ||
1194 | |||
1195 | if (retval == 0) { | ||
1196 | dev_dbg(&pdev->dev, "%s pci_save_state returned=%d\n", | ||
1197 | __func__, retval); | ||
1198 | /* disable PM notifications */ | ||
1199 | pci_enable_wake(pdev, PCI_D3hot, 0); | ||
1200 | dev_dbg(&pdev->dev, | ||
1201 | "%s pci_enable_wake invoked successfully\n", __func__); | ||
1202 | /* disable PCI device */ | ||
1203 | pci_disable_device(pdev); | ||
1204 | dev_dbg(&pdev->dev, | ||
1205 | "%s pci_disable_device invoked successfully\n", | ||
1206 | __func__); | ||
1207 | /* move device to D3hot state */ | ||
1208 | pci_set_power_state(pdev, PCI_D3hot); | ||
1209 | dev_dbg(&pdev->dev, | ||
1210 | "%s pci_set_power_state invoked successfully\n", | ||
1211 | __func__); | ||
1212 | } else { | ||
1213 | dev_err(&pdev->dev, "%s pci_save_state failed\n", __func__); | ||
1214 | } | ||
1215 | |||
1216 | dev_dbg(&pdev->dev, "%s return=%d\n", __func__, retval); | ||
1217 | |||
1218 | return retval; | ||
1219 | } | ||
1220 | |||
1221 | static int pch_spi_resume(struct pci_dev *pdev) | ||
1222 | { | ||
1223 | int retval; | ||
1224 | |||
1225 | struct pch_spi_board_data *board = pci_get_drvdata(pdev); | ||
1226 | dev_dbg(&pdev->dev, "%s ENTRY\n", __func__); | ||
1227 | |||
1228 | if (!board) { | ||
1229 | dev_err(&pdev->dev, | ||
1230 | "%s pci_get_drvdata returned NULL\n", __func__); | ||
1231 | return -EFAULT; | ||
1232 | } | ||
1233 | |||
1234 | /* move device to DO power state */ | ||
1235 | pci_set_power_state(pdev, PCI_D0); | ||
1236 | |||
1237 | /* restore state */ | ||
1238 | pci_restore_state(pdev); | ||
1239 | |||
1240 | retval = pci_enable_device(pdev); | ||
1241 | if (retval < 0) { | ||
1242 | dev_err(&pdev->dev, | ||
1243 | "%s pci_enable_device failed\n", __func__); | ||
1244 | } else { | ||
1245 | /* disable PM notifications */ | ||
1246 | pci_enable_wake(pdev, PCI_D3hot, 0); | ||
1247 | |||
1248 | /* register IRQ handler */ | ||
1249 | if (!board->irq_reg_sts) { | ||
1250 | /* register IRQ */ | ||
1251 | retval = request_irq(board->pdev->irq, pch_spi_handler, | ||
1252 | IRQF_SHARED, KBUILD_MODNAME, | ||
1253 | board); | ||
1254 | if (retval < 0) { | ||
1255 | dev_err(&pdev->dev, | ||
1256 | "%s request_irq failed\n", __func__); | ||
1257 | return retval; | ||
1258 | } | ||
1259 | board->irq_reg_sts = true; | ||
1260 | |||
1261 | /* reset PCH SPI h/w */ | ||
1262 | pch_spi_reset(board->data->master); | ||
1263 | pch_spi_set_master_mode(board->data->master); | ||
1264 | |||
1265 | /* set suspend status to false */ | ||
1266 | board->suspend_sts = false; | ||
1267 | |||
1268 | } | ||
1269 | } | ||
1270 | |||
1271 | dev_dbg(&pdev->dev, "%s returning=%d\n", __func__, retval); | ||
1272 | |||
1273 | return retval; | ||
1274 | } | ||
1275 | #else | ||
1276 | #define pch_spi_suspend NULL | ||
1277 | #define pch_spi_resume NULL | ||
1278 | |||
1279 | #endif | ||
1280 | |||
1281 | static struct pci_driver pch_spi_pcidev = { | ||
1282 | .name = "pch_spi", | ||
1283 | .id_table = pch_spi_pcidev_id, | ||
1284 | .probe = pch_spi_probe, | ||
1285 | .remove = pch_spi_remove, | ||
1286 | .suspend = pch_spi_suspend, | ||
1287 | .resume = pch_spi_resume, | ||
1288 | }; | ||
1289 | |||
1290 | static int __init pch_spi_init(void) | ||
1291 | { | ||
1292 | return pci_register_driver(&pch_spi_pcidev); | ||
1293 | } | ||
1294 | module_init(pch_spi_init); | ||
1295 | |||
1296 | static void __exit pch_spi_exit(void) | ||
1297 | { | ||
1298 | pci_unregister_driver(&pch_spi_pcidev); | ||
1299 | } | ||
1300 | module_exit(pch_spi_exit); | ||
1301 | |||
1302 | MODULE_LICENSE("GPL"); | ||
1303 | MODULE_DESCRIPTION("Topcliff PCH SPI PCI Driver"); | ||