1 files changed, 12 insertions, 21 deletions

diff --git a/drivers/spi/spi_lm70llp.c b/drivers/spi/spi_lm70llp.c
index af6526767e2a..568c781ad91c 100644
--- a/drivers/spi/spi_lm70llp.c
+++ b/drivers/spi/spi_lm70llp.c
@@ -1,5 +1,5 @@
 /*
- * spi_lm70llp.c - driver for lm70llp eval board for the LM70 sensor
+ * spi_lm70llp.c - driver for LM70EVAL-LLP board for the LM70 sensor
  *
  * Copyright (C) 2006 Kaiwan N Billimoria <kaiwan@designergraphix.com>
  *
@@ -40,8 +40,12 @@
  * master controller driver.  The hwmon/lm70 driver is a "SPI protocol
  * driver", layered on top of this one and usable without the lm70llp.
  *
+ * Datasheet and Schematic:
  * The LM70 is a temperature sensor chip from National Semiconductor; its
  * datasheet is available at http://www.national.com/pf/LM/LM70.html
+ * The schematic for this particular board (the LM70EVAL-LLP) is
+ * available (on page 4) here:
+ *  http://www.national.com/appinfo/tempsensors/files/LM70LLPEVALmanual.pdf
  *
  * Also see Documentation/spi/spi-lm70llp.  The SPI<->parport code here is
  * (heavily) based on spi-butterfly by David Brownell.
@@ -64,7 +68,7 @@
  *
  * Note that parport pin 13 actually gets inverted by the transistor
  * arrangement which lets either the parport or the LM70 drive the
- * SI/SO signal.
+ * SI/SO signal (see the schematic for details).
  */
 
 #define DRVNAME         "spi-lm70llp"
@@ -106,12 +110,16 @@ static inline struct spi_lm70llp *spidev_to_pp(struct spi_device *spi)
 static inline void deassertCS(struct spi_lm70llp *pp)
 {
         u8 data = parport_read_data(pp->port);
+
+        data &= ~0x80;          /* pull D7/SI-out low while de-asserted */
         parport_write_data(pp->port, data | nCS);
 }
 
 static inline void assertCS(struct spi_lm70llp *pp)
 {
         u8 data = parport_read_data(pp->port);
+
+        data |= 0x80;           /* pull D7/SI-out high so lm70 drives SO-in */
         parport_write_data(pp->port, data & ~nCS);
 }
 
@@ -184,22 +192,7 @@ static void lm70_chipselect(struct spi_device *spi, int value)
  */
 static u32 lm70_txrx(struct spi_device *spi, unsigned nsecs, u32 word, u8 bits)
 {
-        static u32 sio=0;
-        static int first_time=1;
-
-        /* First time: perform SPI bitbang and return the LSB of
-         * the result of the SPI call.
-         */
-        if (first_time) {
-                sio = bitbang_txrx_be_cpha0(spi, nsecs, 0, word, bits);
-                first_time=0;
-                return (sio & 0x00ff);
-        }
-        /* Return the MSB of the result of the SPI call */
-        else {
-                first_time=1;
-                return (sio >> 8);
-        }
+        return bitbang_txrx_be_cpha0(spi, nsecs, 0, word, bits);
 }
 
 static void spi_lm70llp_attach(struct parport *p)
@@ -293,10 +286,9 @@ static void spi_lm70llp_attach(struct parport *p)
                 status = -ENODEV;
                 goto out_bitbang_stop;
         }
-        pp->spidev_lm70->bits_per_word = 16;
+        pp->spidev_lm70->bits_per_word = 8;
 
         lm70llp = pp;
-
         return;
 
 out_bitbang_stop:
@@ -326,7 +318,6 @@ static void spi_lm70llp_detach(struct parport *p)
 
         /* power down */
         parport_write_data(pp->port, 0);
-        msleep(10);
 
         parport_release(pp->pd);
         parport_unregister_device(pp->pd);