1 files changed, 27 insertions, 19 deletions

diff --git a/drivers/spi/pxa2xx_spi.c b/drivers/spi/pxa2xx_spi.c
index 59ae3ed16658..dae87b1a4c6e 100644
--- a/drivers/spi/pxa2xx_spi.c
+++ b/drivers/spi/pxa2xx_spi.c
@@ -47,6 +47,10 @@ MODULE_ALIAS("platform:pxa2xx-spi");
 
 #define MAX_BUSES 3
 
+#define RX_THRESH_DFLT  8
+#define TX_THRESH_DFLT  8
+#define TIMOUT_DFLT             1000
+
 #define DMA_INT_MASK            (DCSR_ENDINTR | DCSR_STARTINTR | DCSR_BUSERR)
 #define RESET_DMA_CHANNEL       (DCSR_NODESC | DMA_INT_MASK)
 #define IS_DMA_ALIGNED(x)       ((((u32)(x)) & 0x07) == 0)
@@ -1171,6 +1175,8 @@ static int setup(struct spi_device *spi)
         struct driver_data *drv_data = spi_master_get_devdata(spi->master);
         struct ssp_device *ssp = drv_data->ssp;
         unsigned int clk_div;
+        uint tx_thres = TX_THRESH_DFLT;
+        uint rx_thres = RX_THRESH_DFLT;
 
         if (!spi->bits_per_word)
                 spi->bits_per_word = 8;
@@ -1209,8 +1215,7 @@ static int setup(struct spi_device *spi)
 
                 chip->cs_control = null_cs_control;
                 chip->enable_dma = 0;
-                chip->timeout = 1000;
-                chip->threshold = SSCR1_RxTresh(1) | SSCR1_TxTresh(1);
+                chip->timeout = TIMOUT_DFLT;
                 chip->dma_burst_size = drv_data->master_info->enable_dma ?
                                         DCMD_BURST8 : 0;
         }
@@ -1224,22 +1229,21 @@ static int setup(struct spi_device *spi)
         if (chip_info) {
                 if (chip_info->cs_control)
                         chip->cs_control = chip_info->cs_control;
-
-                chip->timeout = chip_info->timeout;
-
-                chip->threshold = (SSCR1_RxTresh(chip_info->rx_threshold) &
-                                                                SSCR1_RFT) |
-                                (SSCR1_TxTresh(chip_info->tx_threshold) &
-                                                                SSCR1_TFT);
-
-                chip->enable_dma = chip_info->dma_burst_size != 0
-                                        && drv_data->master_info->enable_dma;
+                if (chip_info->timeout)
+                        chip->timeout = chip_info->timeout;
+                if (chip_info->tx_threshold)
+                        tx_thres = chip_info->tx_threshold;
+                if (chip_info->rx_threshold)
+                        rx_thres = chip_info->rx_threshold;
+                chip->enable_dma = drv_data->master_info->enable_dma;
                 chip->dma_threshold = 0;
-
                 if (chip_info->enable_loopback)
                         chip->cr1 = SSCR1_LBM;
         }
 
+        chip->threshold = (SSCR1_RxTresh(rx_thres) & SSCR1_RFT) |
+                        (SSCR1_TxTresh(tx_thres) & SSCR1_TFT);
+
         /* set dma burst and threshold outside of chip_info path so that if
          * chip_info goes away after setting chip->enable_dma, the
          * burst and threshold can still respond to changes in bits_per_word */
@@ -1268,17 +1272,19 @@ static int setup(struct spi_device *spi)
 
         /* NOTE:  PXA25x_SSP _could_ use external clocking ... */
         if (drv_data->ssp_type != PXA25x_SSP)
-                dev_dbg(&spi->dev, "%d bits/word, %ld Hz, mode %d\n",
+                dev_dbg(&spi->dev, "%d bits/word, %ld Hz, mode %d, %s\n",
                                 spi->bits_per_word,
                                 clk_get_rate(ssp->clk)
                                         / (1 + ((chip->cr0 & SSCR0_SCR) >> 8)),
-                                spi->mode & 0x3);
+                                spi->mode & 0x3,
+                                chip->enable_dma ? "DMA" : "PIO");
         else
-                dev_dbg(&spi->dev, "%d bits/word, %ld Hz, mode %d\n",
+                dev_dbg(&spi->dev, "%d bits/word, %ld Hz, mode %d, %s\n",
                                 spi->bits_per_word,
-                                clk_get_rate(ssp->clk)
+                                clk_get_rate(ssp->clk) / 2
                                         / (1 + ((chip->cr0 & SSCR0_SCR) >> 8)),
-                                spi->mode & 0x3);
+                                spi->mode & 0x3,
+                                chip->enable_dma ? "DMA" : "PIO");
 
         if (spi->bits_per_word <= 8) {
                 chip->n_bytes = 1;
@@ -1498,7 +1504,9 @@ static int __init pxa2xx_spi_probe(struct platform_device *pdev)
 
         /* Load default SSP configuration */
         write_SSCR0(0, drv_data->ioaddr);
-        write_SSCR1(SSCR1_RxTresh(4) | SSCR1_TxTresh(12), drv_data->ioaddr);
+        write_SSCR1(SSCR1_RxTresh(RX_THRESH_DFLT) |
+                                SSCR1_TxTresh(TX_THRESH_DFLT),
+                                drv_data->ioaddr);
         write_SSCR0(SSCR0_SerClkDiv(2)
                         | SSCR0_Motorola
                         | SSCR0_DataSize(8),