aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/serial
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/serial')
-rw-r--r--drivers/serial/Kconfig27
-rw-r--r--drivers/serial/Makefile1
-rw-r--r--drivers/serial/omap-serial.c1333
3 files changed, 1361 insertions, 0 deletions
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 12900f7083b0..8d8b975ce784 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -1416,6 +1416,33 @@ config SERIAL_OF_PLATFORM
1416 Currently, only 8250 compatible ports are supported, but 1416 Currently, only 8250 compatible ports are supported, but
1417 others can easily be added. 1417 others can easily be added.
1418 1418
1419config SERIAL_OMAP
1420 tristate "OMAP serial port support"
1421 depends on ARCH_OMAP2 || ARCH_OMAP3 || ARCH_OMAP4
1422 select SERIAL_CORE
1423 help
1424 If you have a machine based on an Texas Instruments OMAP CPU you
1425 can enable its onboard serial ports by enabling this option.
1426
1427 By enabling this option you take advantage of dma feature available
1428 with the omap-serial driver. DMA support can be enabled from platform
1429 data.
1430
1431config SERIAL_OMAP_CONSOLE
1432 bool "Console on OMAP serial port"
1433 depends on SERIAL_OMAP
1434 select SERIAL_CORE_CONSOLE
1435 help
1436 Select this option if you would like to use omap serial port as
1437 console.
1438
1439 Even if you say Y here, the currently visible virtual console
1440 (/dev/tty0) will still be used as the system console by default, but
1441 you can alter that using a kernel command line option such as
1442 "console=ttyOx". (Try "man bootparam" or see the documentation of
1443 your boot loader about how to pass options to the kernel at
1444 boot time.)
1445
1419config SERIAL_OF_PLATFORM_NWPSERIAL 1446config SERIAL_OF_PLATFORM_NWPSERIAL
1420 tristate "NWP serial port driver" 1447 tristate "NWP serial port driver"
1421 depends on PPC_OF && PPC_DCR 1448 depends on PPC_OF && PPC_DCR
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index 1ca4fd599ffe..c5705765454f 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -88,3 +88,4 @@ obj-$(CONFIG_SERIAL_ALTERA_JTAGUART) += altera_jtaguart.o
88obj-$(CONFIG_SERIAL_ALTERA_UART) += altera_uart.o 88obj-$(CONFIG_SERIAL_ALTERA_UART) += altera_uart.o
89obj-$(CONFIG_SERIAL_MRST_MAX3110) += mrst_max3110.o 89obj-$(CONFIG_SERIAL_MRST_MAX3110) += mrst_max3110.o
90obj-$(CONFIG_SERIAL_MFD_HSU) += mfd.o 90obj-$(CONFIG_SERIAL_MFD_HSU) += mfd.o
91obj-$(CONFIG_SERIAL_OMAP) += omap-serial.o
diff --git a/drivers/serial/omap-serial.c b/drivers/serial/omap-serial.c
new file mode 100644
index 000000000000..2ee1d3282a8c
--- /dev/null
+++ b/drivers/serial/omap-serial.c
@@ -0,0 +1,1333 @@
1/*
2 * Driver for OMAP-UART controller.
3 * Based on drivers/serial/8250.c
4 *
5 * Copyright (C) 2010 Texas Instruments.
6 *
7 * Authors:
8 * Govindraj R <govindraj.raja@ti.com>
9 * Thara Gopinath <thara@ti.com>
10 *
11 * This program is free software; you can redistribute it and/or modify
12 * it under the terms of the GNU General Public License as published by
13 * the Free Software Foundation; either version 2 of the License, or
14 * (at your option) any later version.
15 *
16 * Note: This driver is made seperate from 8250 driver as we cannot
17 * over load 8250 driver with omap platform specific configuration for
18 * features like DMA, it makes easier to implement features like DMA and
19 * hardware flow control and software flow control configuration with
20 * this driver as required for the omap-platform.
21 */
22
23#include <linux/module.h>
24#include <linux/init.h>
25#include <linux/console.h>
26#include <linux/serial_reg.h>
27#include <linux/delay.h>
28#include <linux/slab.h>
29#include <linux/tty.h>
30#include <linux/tty_flip.h>
31#include <linux/io.h>
32#include <linux/dma-mapping.h>
33#include <linux/clk.h>
34#include <linux/serial_core.h>
35#include <linux/irq.h>
36
37#include <plat/dma.h>
38#include <plat/dmtimer.h>
39#include <plat/omap-serial.h>
40
41static struct uart_omap_port *ui[OMAP_MAX_HSUART_PORTS];
42
43/* Forward declaration of functions */
44static void uart_tx_dma_callback(int lch, u16 ch_status, void *data);
45static void serial_omap_rx_timeout(unsigned long uart_no);
46static int serial_omap_start_rxdma(struct uart_omap_port *up);
47
48static inline unsigned int serial_in(struct uart_omap_port *up, int offset)
49{
50 offset <<= up->port.regshift;
51 return readw(up->port.membase + offset);
52}
53
54static inline void serial_out(struct uart_omap_port *up, int offset, int value)
55{
56 offset <<= up->port.regshift;
57 writew(value, up->port.membase + offset);
58}
59
60static inline void serial_omap_clear_fifos(struct uart_omap_port *up)
61{
62 serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO);
63 serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO |
64 UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
65 serial_out(up, UART_FCR, 0);
66}
67
68/*
69 * serial_omap_get_divisor - calculate divisor value
70 * @port: uart port info
71 * @baud: baudrate for which divisor needs to be calculated.
72 *
73 * We have written our own function to get the divisor so as to support
74 * 13x mode. 3Mbps Baudrate as an different divisor.
75 * Reference OMAP TRM Chapter 17:
76 * Table 17-1. UART Mode Baud Rates, Divisor Values, and Error Rates
77 * referring to oversampling - divisor value
78 * baudrate 460,800 to 3,686,400 all have divisor 13
79 * except 3,000,000 which has divisor value 16
80 */
81static unsigned int
82serial_omap_get_divisor(struct uart_port *port, unsigned int baud)
83{
84 unsigned int divisor;
85
86 if (baud > OMAP_MODE13X_SPEED && baud != 3000000)
87 divisor = 13;
88 else
89 divisor = 16;
90 return port->uartclk/(baud * divisor);
91}
92
93static void serial_omap_stop_rxdma(struct uart_omap_port *up)
94{
95 if (up->uart_dma.rx_dma_used) {
96 del_timer(&up->uart_dma.rx_timer);
97 omap_stop_dma(up->uart_dma.rx_dma_channel);
98 omap_free_dma(up->uart_dma.rx_dma_channel);
99 up->uart_dma.rx_dma_channel = OMAP_UART_DMA_CH_FREE;
100 up->uart_dma.rx_dma_used = false;
101 }
102}
103
104static void serial_omap_enable_ms(struct uart_port *port)
105{
106 struct uart_omap_port *up = (struct uart_omap_port *)port;
107
108 dev_dbg(up->port.dev, "serial_omap_enable_ms+%d\n", up->pdev->id);
109 up->ier |= UART_IER_MSI;
110 serial_out(up, UART_IER, up->ier);
111}
112
113static void serial_omap_stop_tx(struct uart_port *port)
114{
115 struct uart_omap_port *up = (struct uart_omap_port *)port;
116
117 if (up->use_dma &&
118 up->uart_dma.tx_dma_channel != OMAP_UART_DMA_CH_FREE) {
119 /*
120 * Check if dma is still active. If yes do nothing,
121 * return. Else stop dma
122 */
123 if (omap_get_dma_active_status(up->uart_dma.tx_dma_channel))
124 return;
125 omap_stop_dma(up->uart_dma.tx_dma_channel);
126 omap_free_dma(up->uart_dma.tx_dma_channel);
127 up->uart_dma.tx_dma_channel = OMAP_UART_DMA_CH_FREE;
128 }
129
130 if (up->ier & UART_IER_THRI) {
131 up->ier &= ~UART_IER_THRI;
132 serial_out(up, UART_IER, up->ier);
133 }
134}
135
136static void serial_omap_stop_rx(struct uart_port *port)
137{
138 struct uart_omap_port *up = (struct uart_omap_port *)port;
139
140 if (up->use_dma)
141 serial_omap_stop_rxdma(up);
142 up->ier &= ~UART_IER_RLSI;
143 up->port.read_status_mask &= ~UART_LSR_DR;
144 serial_out(up, UART_IER, up->ier);
145}
146
147static inline void receive_chars(struct uart_omap_port *up, int *status)
148{
149 struct tty_struct *tty = up->port.state->port.tty;
150 unsigned int flag;
151 unsigned char ch, lsr = *status;
152 int max_count = 256;
153
154 do {
155 if (likely(lsr & UART_LSR_DR))
156 ch = serial_in(up, UART_RX);
157 flag = TTY_NORMAL;
158 up->port.icount.rx++;
159
160 if (unlikely(lsr & UART_LSR_BRK_ERROR_BITS)) {
161 /*
162 * For statistics only
163 */
164 if (lsr & UART_LSR_BI) {
165 lsr &= ~(UART_LSR_FE | UART_LSR_PE);
166 up->port.icount.brk++;
167 /*
168 * We do the SysRQ and SAK checking
169 * here because otherwise the break
170 * may get masked by ignore_status_mask
171 * or read_status_mask.
172 */
173 if (uart_handle_break(&up->port))
174 goto ignore_char;
175 } else if (lsr & UART_LSR_PE) {
176 up->port.icount.parity++;
177 } else if (lsr & UART_LSR_FE) {
178 up->port.icount.frame++;
179 }
180
181 if (lsr & UART_LSR_OE)
182 up->port.icount.overrun++;
183
184 /*
185 * Mask off conditions which should be ignored.
186 */
187 lsr &= up->port.read_status_mask;
188
189#ifdef CONFIG_SERIAL_OMAP_CONSOLE
190 if (up->port.line == up->port.cons->index) {
191 /* Recover the break flag from console xmit */
192 lsr |= up->lsr_break_flag;
193 up->lsr_break_flag = 0;
194 }
195#endif
196 if (lsr & UART_LSR_BI)
197 flag = TTY_BREAK;
198 else if (lsr & UART_LSR_PE)
199 flag = TTY_PARITY;
200 else if (lsr & UART_LSR_FE)
201 flag = TTY_FRAME;
202 }
203
204 if (uart_handle_sysrq_char(&up->port, ch))
205 goto ignore_char;
206 uart_insert_char(&up->port, lsr, UART_LSR_OE, ch, flag);
207ignore_char:
208 lsr = serial_in(up, UART_LSR);
209 } while ((lsr & (UART_LSR_DR | UART_LSR_BI)) && (max_count-- > 0));
210 spin_unlock(&up->port.lock);
211 tty_flip_buffer_push(tty);
212 spin_lock(&up->port.lock);
213}
214
215static void transmit_chars(struct uart_omap_port *up)
216{
217 struct circ_buf *xmit = &up->port.state->xmit;
218 int count;
219
220 if (up->port.x_char) {
221 serial_out(up, UART_TX, up->port.x_char);
222 up->port.icount.tx++;
223 up->port.x_char = 0;
224 return;
225 }
226 if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) {
227 serial_omap_stop_tx(&up->port);
228 return;
229 }
230 count = up->port.fifosize / 4;
231 do {
232 serial_out(up, UART_TX, xmit->buf[xmit->tail]);
233 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
234 up->port.icount.tx++;
235 if (uart_circ_empty(xmit))
236 break;
237 } while (--count > 0);
238
239 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
240 uart_write_wakeup(&up->port);
241
242 if (uart_circ_empty(xmit))
243 serial_omap_stop_tx(&up->port);
244}
245
246static inline void serial_omap_enable_ier_thri(struct uart_omap_port *up)
247{
248 if (!(up->ier & UART_IER_THRI)) {
249 up->ier |= UART_IER_THRI;
250 serial_out(up, UART_IER, up->ier);
251 }
252}
253
254static void serial_omap_start_tx(struct uart_port *port)
255{
256 struct uart_omap_port *up = (struct uart_omap_port *)port;
257 struct circ_buf *xmit;
258 unsigned int start;
259 int ret = 0;
260
261 if (!up->use_dma) {
262 serial_omap_enable_ier_thri(up);
263 return;
264 }
265
266 if (up->uart_dma.tx_dma_used)
267 return;
268
269 xmit = &up->port.state->xmit;
270
271 if (up->uart_dma.tx_dma_channel == OMAP_UART_DMA_CH_FREE) {
272 ret = omap_request_dma(up->uart_dma.uart_dma_tx,
273 "UART Tx DMA",
274 (void *)uart_tx_dma_callback, up,
275 &(up->uart_dma.tx_dma_channel));
276
277 if (ret < 0) {
278 serial_omap_enable_ier_thri(up);
279 return;
280 }
281 }
282 spin_lock(&(up->uart_dma.tx_lock));
283 up->uart_dma.tx_dma_used = true;
284 spin_unlock(&(up->uart_dma.tx_lock));
285
286 start = up->uart_dma.tx_buf_dma_phys +
287 (xmit->tail & (UART_XMIT_SIZE - 1));
288
289 up->uart_dma.tx_buf_size = uart_circ_chars_pending(xmit);
290 /*
291 * It is a circular buffer. See if the buffer has wounded back.
292 * If yes it will have to be transferred in two separate dma
293 * transfers
294 */
295 if (start + up->uart_dma.tx_buf_size >=
296 up->uart_dma.tx_buf_dma_phys + UART_XMIT_SIZE)
297 up->uart_dma.tx_buf_size =
298 (up->uart_dma.tx_buf_dma_phys +
299 UART_XMIT_SIZE) - start;
300
301 omap_set_dma_dest_params(up->uart_dma.tx_dma_channel, 0,
302 OMAP_DMA_AMODE_CONSTANT,
303 up->uart_dma.uart_base, 0, 0);
304 omap_set_dma_src_params(up->uart_dma.tx_dma_channel, 0,
305 OMAP_DMA_AMODE_POST_INC, start, 0, 0);
306 omap_set_dma_transfer_params(up->uart_dma.tx_dma_channel,
307 OMAP_DMA_DATA_TYPE_S8,
308 up->uart_dma.tx_buf_size, 1,
309 OMAP_DMA_SYNC_ELEMENT,
310 up->uart_dma.uart_dma_tx, 0);
311 /* FIXME: Cache maintenance needed here? */
312 omap_start_dma(up->uart_dma.tx_dma_channel);
313}
314
315static unsigned int check_modem_status(struct uart_omap_port *up)
316{
317 unsigned int status;
318
319 status = serial_in(up, UART_MSR);
320 status |= up->msr_saved_flags;
321 up->msr_saved_flags = 0;
322 if ((status & UART_MSR_ANY_DELTA) == 0)
323 return status;
324
325 if (status & UART_MSR_ANY_DELTA && up->ier & UART_IER_MSI &&
326 up->port.state != NULL) {
327 if (status & UART_MSR_TERI)
328 up->port.icount.rng++;
329 if (status & UART_MSR_DDSR)
330 up->port.icount.dsr++;
331 if (status & UART_MSR_DDCD)
332 uart_handle_dcd_change
333 (&up->port, status & UART_MSR_DCD);
334 if (status & UART_MSR_DCTS)
335 uart_handle_cts_change
336 (&up->port, status & UART_MSR_CTS);
337 wake_up_interruptible(&up->port.state->port.delta_msr_wait);
338 }
339
340 return status;
341}
342
343/**
344 * serial_omap_irq() - This handles the interrupt from one port
345 * @irq: uart port irq number
346 * @dev_id: uart port info
347 */
348static inline irqreturn_t serial_omap_irq(int irq, void *dev_id)
349{
350 struct uart_omap_port *up = dev_id;
351 unsigned int iir, lsr;
352 unsigned long flags;
353
354 iir = serial_in(up, UART_IIR);
355 if (iir & UART_IIR_NO_INT)
356 return IRQ_NONE;
357
358 spin_lock_irqsave(&up->port.lock, flags);
359 lsr = serial_in(up, UART_LSR);
360 if (iir & UART_IIR_RLSI) {
361 if (!up->use_dma) {
362 if (lsr & UART_LSR_DR)
363 receive_chars(up, &lsr);
364 } else {
365 up->ier &= ~(UART_IER_RDI | UART_IER_RLSI);
366 serial_out(up, UART_IER, up->ier);
367 if ((serial_omap_start_rxdma(up) != 0) &&
368 (lsr & UART_LSR_DR))
369 receive_chars(up, &lsr);
370 }
371 }
372
373 check_modem_status(up);
374 if ((lsr & UART_LSR_THRE) && (iir & UART_IIR_THRI))
375 transmit_chars(up);
376
377 spin_unlock_irqrestore(&up->port.lock, flags);
378 up->port_activity = jiffies;
379 return IRQ_HANDLED;
380}
381
382static unsigned int serial_omap_tx_empty(struct uart_port *port)
383{
384 struct uart_omap_port *up = (struct uart_omap_port *)port;
385 unsigned long flags = 0;
386 unsigned int ret = 0;
387
388 dev_dbg(up->port.dev, "serial_omap_tx_empty+%d\n", up->pdev->id);
389 spin_lock_irqsave(&up->port.lock, flags);
390 ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0;
391 spin_unlock_irqrestore(&up->port.lock, flags);
392
393 return ret;
394}
395
396static unsigned int serial_omap_get_mctrl(struct uart_port *port)
397{
398 struct uart_omap_port *up = (struct uart_omap_port *)port;
399 unsigned char status;
400 unsigned int ret = 0;
401
402 status = check_modem_status(up);
403 dev_dbg(up->port.dev, "serial_omap_get_mctrl+%d\n", up->pdev->id);
404
405 if (status & UART_MSR_DCD)
406 ret |= TIOCM_CAR;
407 if (status & UART_MSR_RI)
408 ret |= TIOCM_RNG;
409 if (status & UART_MSR_DSR)
410 ret |= TIOCM_DSR;
411 if (status & UART_MSR_CTS)
412 ret |= TIOCM_CTS;
413 return ret;
414}
415
416static void serial_omap_set_mctrl(struct uart_port *port, unsigned int mctrl)
417{
418 struct uart_omap_port *up = (struct uart_omap_port *)port;
419 unsigned char mcr = 0;
420
421 dev_dbg(up->port.dev, "serial_omap_set_mctrl+%d\n", up->pdev->id);
422 if (mctrl & TIOCM_RTS)
423 mcr |= UART_MCR_RTS;
424 if (mctrl & TIOCM_DTR)
425 mcr |= UART_MCR_DTR;
426 if (mctrl & TIOCM_OUT1)
427 mcr |= UART_MCR_OUT1;
428 if (mctrl & TIOCM_OUT2)
429 mcr |= UART_MCR_OUT2;
430 if (mctrl & TIOCM_LOOP)
431 mcr |= UART_MCR_LOOP;
432
433 mcr |= up->mcr;
434 serial_out(up, UART_MCR, mcr);
435}
436
437static void serial_omap_break_ctl(struct uart_port *port, int break_state)
438{
439 struct uart_omap_port *up = (struct uart_omap_port *)port;
440 unsigned long flags = 0;
441
442 dev_dbg(up->port.dev, "serial_omap_break_ctl+%d\n", up->pdev->id);
443 spin_lock_irqsave(&up->port.lock, flags);
444 if (break_state == -1)
445 up->lcr |= UART_LCR_SBC;
446 else
447 up->lcr &= ~UART_LCR_SBC;
448 serial_out(up, UART_LCR, up->lcr);
449 spin_unlock_irqrestore(&up->port.lock, flags);
450}
451
452static int serial_omap_startup(struct uart_port *port)
453{
454 struct uart_omap_port *up = (struct uart_omap_port *)port;
455 unsigned long flags = 0;
456 int retval;
457
458 /*
459 * Allocate the IRQ
460 */
461 retval = request_irq(up->port.irq, serial_omap_irq, up->port.irqflags,
462 up->name, up);
463 if (retval)
464 return retval;
465
466 dev_dbg(up->port.dev, "serial_omap_startup+%d\n", up->pdev->id);
467
468 /*
469 * Clear the FIFO buffers and disable them.
470 * (they will be reenabled in set_termios())
471 */
472 serial_omap_clear_fifos(up);
473 /* For Hardware flow control */
474 serial_out(up, UART_MCR, UART_MCR_RTS);
475
476 /*
477 * Clear the interrupt registers.
478 */
479 (void) serial_in(up, UART_LSR);
480 if (serial_in(up, UART_LSR) & UART_LSR_DR)
481 (void) serial_in(up, UART_RX);
482 (void) serial_in(up, UART_IIR);
483 (void) serial_in(up, UART_MSR);
484
485 /*
486 * Now, initialize the UART
487 */
488 serial_out(up, UART_LCR, UART_LCR_WLEN8);
489 spin_lock_irqsave(&up->port.lock, flags);
490 /*
491 * Most PC uarts need OUT2 raised to enable interrupts.
492 */
493 up->port.mctrl |= TIOCM_OUT2;
494 serial_omap_set_mctrl(&up->port, up->port.mctrl);
495 spin_unlock_irqrestore(&up->port.lock, flags);
496
497 up->msr_saved_flags = 0;
498 if (up->use_dma) {
499 free_page((unsigned long)up->port.state->xmit.buf);
500 up->port.state->xmit.buf = dma_alloc_coherent(NULL,
501 UART_XMIT_SIZE,
502 (dma_addr_t *)&(up->uart_dma.tx_buf_dma_phys),
503 0);
504 init_timer(&(up->uart_dma.rx_timer));
505 up->uart_dma.rx_timer.function = serial_omap_rx_timeout;
506 up->uart_dma.rx_timer.data = up->pdev->id;
507 /* Currently the buffer size is 4KB. Can increase it */
508 up->uart_dma.rx_buf = dma_alloc_coherent(NULL,
509 up->uart_dma.rx_buf_size,
510 (dma_addr_t *)&(up->uart_dma.rx_buf_dma_phys), 0);
511 }
512 /*
513 * Finally, enable interrupts. Note: Modem status interrupts
514 * are set via set_termios(), which will be occurring imminently
515 * anyway, so we don't enable them here.
516 */
517 up->ier = UART_IER_RLSI | UART_IER_RDI;
518 serial_out(up, UART_IER, up->ier);
519
520 up->port_activity = jiffies;
521 return 0;
522}
523
524static void serial_omap_shutdown(struct uart_port *port)
525{
526 struct uart_omap_port *up = (struct uart_omap_port *)port;
527 unsigned long flags = 0;
528
529 dev_dbg(up->port.dev, "serial_omap_shutdown+%d\n", up->pdev->id);
530 /*
531 * Disable interrupts from this port
532 */
533 up->ier = 0;
534 serial_out(up, UART_IER, 0);
535
536 spin_lock_irqsave(&up->port.lock, flags);
537 up->port.mctrl &= ~TIOCM_OUT2;
538 serial_omap_set_mctrl(&up->port, up->port.mctrl);
539 spin_unlock_irqrestore(&up->port.lock, flags);
540
541 /*
542 * Disable break condition and FIFOs
543 */
544 serial_out(up, UART_LCR, serial_in(up, UART_LCR) & ~UART_LCR_SBC);
545 serial_omap_clear_fifos(up);
546
547 /*
548 * Read data port to reset things, and then free the irq
549 */
550 if (serial_in(up, UART_LSR) & UART_LSR_DR)
551 (void) serial_in(up, UART_RX);
552 if (up->use_dma) {
553 dma_free_coherent(up->port.dev,
554 UART_XMIT_SIZE, up->port.state->xmit.buf,
555 up->uart_dma.tx_buf_dma_phys);
556 up->port.state->xmit.buf = NULL;
557 serial_omap_stop_rx(port);
558 dma_free_coherent(up->port.dev,
559 up->uart_dma.rx_buf_size, up->uart_dma.rx_buf,
560 up->uart_dma.rx_buf_dma_phys);
561 up->uart_dma.rx_buf = NULL;
562 }
563 free_irq(up->port.irq, up);
564}
565
566static inline void
567serial_omap_configure_xonxoff
568 (struct uart_omap_port *up, struct ktermios *termios)
569{
570 unsigned char efr = 0;
571
572 up->lcr = serial_in(up, UART_LCR);
573 serial_out(up, UART_LCR, OMAP_UART_LCR_CONF_MDB);
574 up->efr = serial_in(up, UART_EFR);
575 serial_out(up, UART_EFR, up->efr & ~UART_EFR_ECB);
576
577 serial_out(up, UART_XON1, termios->c_cc[VSTART]);
578 serial_out(up, UART_XOFF1, termios->c_cc[VSTOP]);
579
580 /* clear SW control mode bits */
581 efr = up->efr;
582 efr &= OMAP_UART_SW_CLR;
583
584 /*
585 * IXON Flag:
586 * Enable XON/XOFF flow control on output.
587 * Transmit XON1, XOFF1
588 */
589 if (termios->c_iflag & IXON)
590 efr |= OMAP_UART_SW_TX;
591
592 /*
593 * IXOFF Flag:
594 * Enable XON/XOFF flow control on input.
595 * Receiver compares XON1, XOFF1.
596 */
597 if (termios->c_iflag & IXOFF)
598 efr |= OMAP_UART_SW_RX;
599
600 serial_out(up, UART_EFR, up->efr | UART_EFR_ECB);
601 serial_out(up, UART_LCR, UART_LCR_DLAB);
602
603 up->mcr = serial_in(up, UART_MCR);
604
605 /*
606 * IXANY Flag:
607 * Enable any character to restart output.
608 * Operation resumes after receiving any
609 * character after recognition of the XOFF character
610 */
611 if (termios->c_iflag & IXANY)
612 up->mcr |= UART_MCR_XONANY;
613
614 serial_out(up, UART_MCR, up->mcr | UART_MCR_TCRTLR);
615 serial_out(up, UART_LCR, OMAP_UART_LCR_CONF_MDB);
616 serial_out(up, UART_TI752_TCR, OMAP_UART_TCR_TRIG);
617 /* Enable special char function UARTi.EFR_REG[5] and
618 * load the new software flow control mode IXON or IXOFF
619 * and restore the UARTi.EFR_REG[4] ENHANCED_EN value.
620 */
621 serial_out(up, UART_EFR, efr | UART_EFR_SCD);
622 serial_out(up, UART_LCR, UART_LCR_DLAB);
623
624 serial_out(up, UART_MCR, up->mcr & ~UART_MCR_TCRTLR);
625 serial_out(up, UART_LCR, up->lcr);
626}
627
628static void
629serial_omap_set_termios(struct uart_port *port, struct ktermios *termios,
630 struct ktermios *old)
631{
632 struct uart_omap_port *up = (struct uart_omap_port *)port;
633 unsigned char cval = 0;
634 unsigned char efr = 0;
635 unsigned long flags = 0;
636 unsigned int baud, quot;
637
638 switch (termios->c_cflag & CSIZE) {
639 case CS5:
640 cval = UART_LCR_WLEN5;
641 break;
642 case CS6:
643 cval = UART_LCR_WLEN6;
644 break;
645 case CS7:
646 cval = UART_LCR_WLEN7;
647 break;
648 default:
649 case CS8:
650 cval = UART_LCR_WLEN8;
651 break;
652 }
653
654 if (termios->c_cflag & CSTOPB)
655 cval |= UART_LCR_STOP;
656 if (termios->c_cflag & PARENB)
657 cval |= UART_LCR_PARITY;
658 if (!(termios->c_cflag & PARODD))
659 cval |= UART_LCR_EPAR;
660
661 /*
662 * Ask the core to calculate the divisor for us.
663 */
664
665 baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/13);
666 quot = serial_omap_get_divisor(port, baud);
667
668 up->fcr = UART_FCR_R_TRIG_01 | UART_FCR_T_TRIG_01 |
669 UART_FCR_ENABLE_FIFO;
670 if (up->use_dma)
671 up->fcr |= UART_FCR_DMA_SELECT;
672
673 /*
674 * Ok, we're now changing the port state. Do it with
675 * interrupts disabled.
676 */
677 spin_lock_irqsave(&up->port.lock, flags);
678
679 /*
680 * Update the per-port timeout.
681 */
682 uart_update_timeout(port, termios->c_cflag, baud);
683
684 up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR;
685 if (termios->c_iflag & INPCK)
686 up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE;
687 if (termios->c_iflag & (BRKINT | PARMRK))
688 up->port.read_status_mask |= UART_LSR_BI;
689
690 /*
691 * Characters to ignore
692 */
693 up->port.ignore_status_mask = 0;
694 if (termios->c_iflag & IGNPAR)
695 up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE;
696 if (termios->c_iflag & IGNBRK) {
697 up->port.ignore_status_mask |= UART_LSR_BI;
698 /*
699 * If we're ignoring parity and break indicators,
700 * ignore overruns too (for real raw support).
701 */
702 if (termios->c_iflag & IGNPAR)
703 up->port.ignore_status_mask |= UART_LSR_OE;
704 }
705
706 /*
707 * ignore all characters if CREAD is not set
708 */
709 if ((termios->c_cflag & CREAD) == 0)
710 up->port.ignore_status_mask |= UART_LSR_DR;
711
712 /*
713 * Modem status interrupts
714 */
715 up->ier &= ~UART_IER_MSI;
716 if (UART_ENABLE_MS(&up->port, termios->c_cflag))
717 up->ier |= UART_IER_MSI;
718 serial_out(up, UART_IER, up->ier);
719 serial_out(up, UART_LCR, cval); /* reset DLAB */
720
721 /* FIFOs and DMA Settings */
722
723 /* FCR can be changed only when the
724 * baud clock is not running
725 * DLL_REG and DLH_REG set to 0.
726 */
727 serial_out(up, UART_LCR, UART_LCR_DLAB);
728 serial_out(up, UART_DLL, 0);
729 serial_out(up, UART_DLM, 0);
730 serial_out(up, UART_LCR, 0);
731
732 serial_out(up, UART_LCR, OMAP_UART_LCR_CONF_MDB);
733
734 up->efr = serial_in(up, UART_EFR);
735 serial_out(up, UART_EFR, up->efr | UART_EFR_ECB);
736
737 serial_out(up, UART_LCR, UART_LCR_DLAB);
738 up->mcr = serial_in(up, UART_MCR);
739 serial_out(up, UART_MCR, up->mcr | UART_MCR_TCRTLR);
740 /* FIFO ENABLE, DMA MODE */
741 serial_out(up, UART_FCR, up->fcr);
742 serial_out(up, UART_LCR, OMAP_UART_LCR_CONF_MDB);
743
744 if (up->use_dma) {
745 serial_out(up, UART_TI752_TLR, 0);
746 serial_out(up, UART_OMAP_SCR,
747 (UART_FCR_TRIGGER_4 | UART_FCR_TRIGGER_8));
748 }
749
750 serial_out(up, UART_EFR, up->efr);
751 serial_out(up, UART_LCR, UART_LCR_DLAB);
752 serial_out(up, UART_MCR, up->mcr);
753
754 /* Protocol, Baud Rate, and Interrupt Settings */
755
756 serial_out(up, UART_OMAP_MDR1, OMAP_MDR1_DISABLE);
757 serial_out(up, UART_LCR, OMAP_UART_LCR_CONF_MDB);
758
759 up->efr = serial_in(up, UART_EFR);
760 serial_out(up, UART_EFR, up->efr | UART_EFR_ECB);
761
762 serial_out(up, UART_LCR, 0);
763 serial_out(up, UART_IER, 0);
764 serial_out(up, UART_LCR, OMAP_UART_LCR_CONF_MDB);
765
766 serial_out(up, UART_DLL, quot & 0xff); /* LS of divisor */
767 serial_out(up, UART_DLM, quot >> 8); /* MS of divisor */
768
769 serial_out(up, UART_LCR, 0);
770 serial_out(up, UART_IER, up->ier);
771 serial_out(up, UART_LCR, OMAP_UART_LCR_CONF_MDB);
772
773 serial_out(up, UART_EFR, up->efr);
774 serial_out(up, UART_LCR, cval);
775
776 if (baud > 230400 && baud != 3000000)
777 serial_out(up, UART_OMAP_MDR1, OMAP_MDR1_MODE13X);
778 else
779 serial_out(up, UART_OMAP_MDR1, OMAP_MDR1_MODE16X);
780
781 /* Hardware Flow Control Configuration */
782
783 if (termios->c_cflag & CRTSCTS) {
784 efr |= (UART_EFR_CTS | UART_EFR_RTS);
785 serial_out(up, UART_LCR, UART_LCR_DLAB);
786
787 up->mcr = serial_in(up, UART_MCR);
788 serial_out(up, UART_MCR, up->mcr | UART_MCR_TCRTLR);
789
790 serial_out(up, UART_LCR, OMAP_UART_LCR_CONF_MDB);
791 up->efr = serial_in(up, UART_EFR);
792 serial_out(up, UART_EFR, up->efr | UART_EFR_ECB);
793
794 serial_out(up, UART_TI752_TCR, OMAP_UART_TCR_TRIG);
795 serial_out(up, UART_EFR, efr); /* Enable AUTORTS and AUTOCTS */
796 serial_out(up, UART_LCR, UART_LCR_DLAB);
797 serial_out(up, UART_MCR, up->mcr | UART_MCR_RTS);
798 serial_out(up, UART_LCR, cval);
799 }
800
801 serial_omap_set_mctrl(&up->port, up->port.mctrl);
802 /* Software Flow Control Configuration */
803 if (termios->c_iflag & (IXON | IXOFF))
804 serial_omap_configure_xonxoff(up, termios);
805
806 spin_unlock_irqrestore(&up->port.lock, flags);
807 dev_dbg(up->port.dev, "serial_omap_set_termios+%d\n", up->pdev->id);
808}
809
810static void
811serial_omap_pm(struct uart_port *port, unsigned int state,
812 unsigned int oldstate)
813{
814 struct uart_omap_port *up = (struct uart_omap_port *)port;
815 unsigned char efr;
816
817 dev_dbg(up->port.dev, "serial_omap_pm+%d\n", up->pdev->id);
818 serial_out(up, UART_LCR, OMAP_UART_LCR_CONF_MDB);
819 efr = serial_in(up, UART_EFR);
820 serial_out(up, UART_EFR, efr | UART_EFR_ECB);
821 serial_out(up, UART_LCR, 0);
822
823 serial_out(up, UART_IER, (state != 0) ? UART_IERX_SLEEP : 0);
824 serial_out(up, UART_LCR, OMAP_UART_LCR_CONF_MDB);
825 serial_out(up, UART_EFR, efr);
826 serial_out(up, UART_LCR, 0);
827 /* Enable module level wake up */
828 serial_out(up, UART_OMAP_WER,
829 (state != 0) ? OMAP_UART_WER_MOD_WKUP : 0);
830}
831
832static void serial_omap_release_port(struct uart_port *port)
833{
834 dev_dbg(port->dev, "serial_omap_release_port+\n");
835}
836
837static int serial_omap_request_port(struct uart_port *port)
838{
839 dev_dbg(port->dev, "serial_omap_request_port+\n");
840 return 0;
841}
842
843static void serial_omap_config_port(struct uart_port *port, int flags)
844{
845 struct uart_omap_port *up = (struct uart_omap_port *)port;
846
847 dev_dbg(up->port.dev, "serial_omap_config_port+%d\n",
848 up->pdev->id);
849 up->port.type = PORT_OMAP;
850}
851
852static int
853serial_omap_verify_port(struct uart_port *port, struct serial_struct *ser)
854{
855 /* we don't want the core code to modify any port params */
856 dev_dbg(port->dev, "serial_omap_verify_port+\n");
857 return -EINVAL;
858}
859
860static const char *
861serial_omap_type(struct uart_port *port)
862{
863 struct uart_omap_port *up = (struct uart_omap_port *)port;
864
865 dev_dbg(up->port.dev, "serial_omap_type+%d\n", up->pdev->id);
866 return up->name;
867}
868
869#ifdef CONFIG_SERIAL_OMAP_CONSOLE
870
871static struct uart_omap_port *serial_omap_console_ports[4];
872
873static struct uart_driver serial_omap_reg;
874
875#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
876
877static inline void wait_for_xmitr(struct uart_omap_port *up)
878{
879 unsigned int status, tmout = 10000;
880
881 /* Wait up to 10ms for the character(s) to be sent. */
882 do {
883 status = serial_in(up, UART_LSR);
884
885 if (status & UART_LSR_BI)
886 up->lsr_break_flag = UART_LSR_BI;
887
888 if (--tmout == 0)
889 break;
890 udelay(1);
891 } while ((status & BOTH_EMPTY) != BOTH_EMPTY);
892
893 /* Wait up to 1s for flow control if necessary */
894 if (up->port.flags & UPF_CONS_FLOW) {
895 tmout = 1000000;
896 for (tmout = 1000000; tmout; tmout--) {
897 unsigned int msr = serial_in(up, UART_MSR);
898
899 up->msr_saved_flags |= msr & MSR_SAVE_FLAGS;
900 if (msr & UART_MSR_CTS)
901 break;
902
903 udelay(1);
904 }
905 }
906}
907
908static void serial_omap_console_putchar(struct uart_port *port, int ch)
909{
910 struct uart_omap_port *up = (struct uart_omap_port *)port;
911
912 wait_for_xmitr(up);
913 serial_out(up, UART_TX, ch);
914}
915
916static void
917serial_omap_console_write(struct console *co, const char *s,
918 unsigned int count)
919{
920 struct uart_omap_port *up = serial_omap_console_ports[co->index];
921 unsigned long flags;
922 unsigned int ier;
923 int locked = 1;
924
925 local_irq_save(flags);
926 if (up->port.sysrq)
927 locked = 0;
928 else if (oops_in_progress)
929 locked = spin_trylock(&up->port.lock);
930 else
931 spin_lock(&up->port.lock);
932
933 /*
934 * First save the IER then disable the interrupts
935 */
936 ier = serial_in(up, UART_IER);
937 serial_out(up, UART_IER, 0);
938
939 uart_console_write(&up->port, s, count, serial_omap_console_putchar);
940
941 /*
942 * Finally, wait for transmitter to become empty
943 * and restore the IER
944 */
945 wait_for_xmitr(up);
946 serial_out(up, UART_IER, ier);
947 /*
948 * The receive handling will happen properly because the
949 * receive ready bit will still be set; it is not cleared
950 * on read. However, modem control will not, we must
951 * call it if we have saved something in the saved flags
952 * while processing with interrupts off.
953 */
954 if (up->msr_saved_flags)
955 check_modem_status(up);
956
957 if (locked)
958 spin_unlock(&up->port.lock);
959 local_irq_restore(flags);
960}
961
962static int __init
963serial_omap_console_setup(struct console *co, char *options)
964{
965 struct uart_omap_port *up;
966 int baud = 115200;
967 int bits = 8;
968 int parity = 'n';
969 int flow = 'n';
970
971 if (serial_omap_console_ports[co->index] == NULL)
972 return -ENODEV;
973 up = serial_omap_console_ports[co->index];
974
975 if (options)
976 uart_parse_options(options, &baud, &parity, &bits, &flow);
977
978 return uart_set_options(&up->port, co, baud, parity, bits, flow);
979}
980
981static struct console serial_omap_console = {
982 .name = OMAP_SERIAL_NAME,
983 .write = serial_omap_console_write,
984 .device = uart_console_device,
985 .setup = serial_omap_console_setup,
986 .flags = CON_PRINTBUFFER,
987 .index = -1,
988 .data = &serial_omap_reg,
989};
990
991static void serial_omap_add_console_port(struct uart_omap_port *up)
992{
993 serial_omap_console_ports[up->pdev->id] = up;
994}
995
996#define OMAP_CONSOLE (&serial_omap_console)
997
998#else
999
1000#define OMAP_CONSOLE NULL
1001
1002static inline void serial_omap_add_console_port(struct uart_omap_port *up)
1003{}
1004
1005#endif
1006
1007static struct uart_ops serial_omap_pops = {
1008 .tx_empty = serial_omap_tx_empty,
1009 .set_mctrl = serial_omap_set_mctrl,
1010 .get_mctrl = serial_omap_get_mctrl,
1011 .stop_tx = serial_omap_stop_tx,
1012 .start_tx = serial_omap_start_tx,
1013 .stop_rx = serial_omap_stop_rx,
1014 .enable_ms = serial_omap_enable_ms,
1015 .break_ctl = serial_omap_break_ctl,
1016 .startup = serial_omap_startup,
1017 .shutdown = serial_omap_shutdown,
1018 .set_termios = serial_omap_set_termios,
1019 .pm = serial_omap_pm,
1020 .type = serial_omap_type,
1021 .release_port = serial_omap_release_port,
1022 .request_port = serial_omap_request_port,
1023 .config_port = serial_omap_config_port,
1024 .verify_port = serial_omap_verify_port,
1025};
1026
1027static struct uart_driver serial_omap_reg = {
1028 .owner = THIS_MODULE,
1029 .driver_name = "OMAP-SERIAL",
1030 .dev_name = OMAP_SERIAL_NAME,
1031 .nr = OMAP_MAX_HSUART_PORTS,
1032 .cons = OMAP_CONSOLE,
1033};
1034
1035static int
1036serial_omap_suspend(struct platform_device *pdev, pm_message_t state)
1037{
1038 struct uart_omap_port *up = platform_get_drvdata(pdev);
1039
1040 if (up)
1041 uart_suspend_port(&serial_omap_reg, &up->port);
1042 return 0;
1043}
1044
1045static int serial_omap_resume(struct platform_device *dev)
1046{
1047 struct uart_omap_port *up = platform_get_drvdata(dev);
1048
1049 if (up)
1050 uart_resume_port(&serial_omap_reg, &up->port);
1051 return 0;
1052}
1053
1054static void serial_omap_rx_timeout(unsigned long uart_no)
1055{
1056 struct uart_omap_port *up = ui[uart_no];
1057 unsigned int curr_dma_pos, curr_transmitted_size;
1058 unsigned int ret = 0;
1059
1060 curr_dma_pos = omap_get_dma_dst_pos(up->uart_dma.rx_dma_channel);
1061 if ((curr_dma_pos == up->uart_dma.prev_rx_dma_pos) ||
1062 (curr_dma_pos == 0)) {
1063 if (jiffies_to_msecs(jiffies - up->port_activity) <
1064 RX_TIMEOUT) {
1065 mod_timer(&up->uart_dma.rx_timer, jiffies +
1066 usecs_to_jiffies(up->uart_dma.rx_timeout));
1067 } else {
1068 serial_omap_stop_rxdma(up);
1069 up->ier |= (UART_IER_RDI | UART_IER_RLSI);
1070 serial_out(up, UART_IER, up->ier);
1071 }
1072 return;
1073 }
1074
1075 curr_transmitted_size = curr_dma_pos -
1076 up->uart_dma.prev_rx_dma_pos;
1077 up->port.icount.rx += curr_transmitted_size;
1078 tty_insert_flip_string(up->port.state->port.tty,
1079 up->uart_dma.rx_buf +
1080 (up->uart_dma.prev_rx_dma_pos -
1081 up->uart_dma.rx_buf_dma_phys),
1082 curr_transmitted_size);
1083 tty_flip_buffer_push(up->port.state->port.tty);
1084 up->uart_dma.prev_rx_dma_pos = curr_dma_pos;
1085 if (up->uart_dma.rx_buf_size +
1086 up->uart_dma.rx_buf_dma_phys == curr_dma_pos) {
1087 ret = serial_omap_start_rxdma(up);
1088 if (ret < 0) {
1089 serial_omap_stop_rxdma(up);
1090 up->ier |= (UART_IER_RDI | UART_IER_RLSI);
1091 serial_out(up, UART_IER, up->ier);
1092 }
1093 } else {
1094 mod_timer(&up->uart_dma.rx_timer, jiffies +
1095 usecs_to_jiffies(up->uart_dma.rx_timeout));
1096 }
1097 up->port_activity = jiffies;
1098}
1099
1100static void uart_rx_dma_callback(int lch, u16 ch_status, void *data)
1101{
1102 return;
1103}
1104
1105static int serial_omap_start_rxdma(struct uart_omap_port *up)
1106{
1107 int ret = 0;
1108
1109 if (up->uart_dma.rx_dma_channel == -1) {
1110 ret = omap_request_dma(up->uart_dma.uart_dma_rx,
1111 "UART Rx DMA",
1112 (void *)uart_rx_dma_callback, up,
1113 &(up->uart_dma.rx_dma_channel));
1114 if (ret < 0)
1115 return ret;
1116
1117 omap_set_dma_src_params(up->uart_dma.rx_dma_channel, 0,
1118 OMAP_DMA_AMODE_CONSTANT,
1119 up->uart_dma.uart_base, 0, 0);
1120 omap_set_dma_dest_params(up->uart_dma.rx_dma_channel, 0,
1121 OMAP_DMA_AMODE_POST_INC,
1122 up->uart_dma.rx_buf_dma_phys, 0, 0);
1123 omap_set_dma_transfer_params(up->uart_dma.rx_dma_channel,
1124 OMAP_DMA_DATA_TYPE_S8,
1125 up->uart_dma.rx_buf_size, 1,
1126 OMAP_DMA_SYNC_ELEMENT,
1127 up->uart_dma.uart_dma_rx, 0);
1128 }
1129 up->uart_dma.prev_rx_dma_pos = up->uart_dma.rx_buf_dma_phys;
1130 /* FIXME: Cache maintenance needed here? */
1131 omap_start_dma(up->uart_dma.rx_dma_channel);
1132 mod_timer(&up->uart_dma.rx_timer, jiffies +
1133 usecs_to_jiffies(up->uart_dma.rx_timeout));
1134 up->uart_dma.rx_dma_used = true;
1135 return ret;
1136}
1137
1138static void serial_omap_continue_tx(struct uart_omap_port *up)
1139{
1140 struct circ_buf *xmit = &up->port.state->xmit;
1141 unsigned int start = up->uart_dma.tx_buf_dma_phys
1142 + (xmit->tail & (UART_XMIT_SIZE - 1));
1143
1144 if (uart_circ_empty(xmit))
1145 return;
1146
1147 up->uart_dma.tx_buf_size = uart_circ_chars_pending(xmit);
1148 /*
1149 * It is a circular buffer. See if the buffer has wounded back.
1150 * If yes it will have to be transferred in two separate dma
1151 * transfers
1152 */
1153 if (start + up->uart_dma.tx_buf_size >=
1154 up->uart_dma.tx_buf_dma_phys + UART_XMIT_SIZE)
1155 up->uart_dma.tx_buf_size =
1156 (up->uart_dma.tx_buf_dma_phys + UART_XMIT_SIZE) - start;
1157 omap_set_dma_dest_params(up->uart_dma.tx_dma_channel, 0,
1158 OMAP_DMA_AMODE_CONSTANT,
1159 up->uart_dma.uart_base, 0, 0);
1160 omap_set_dma_src_params(up->uart_dma.tx_dma_channel, 0,
1161 OMAP_DMA_AMODE_POST_INC, start, 0, 0);
1162 omap_set_dma_transfer_params(up->uart_dma.tx_dma_channel,
1163 OMAP_DMA_DATA_TYPE_S8,
1164 up->uart_dma.tx_buf_size, 1,
1165 OMAP_DMA_SYNC_ELEMENT,
1166 up->uart_dma.uart_dma_tx, 0);
1167 /* FIXME: Cache maintenance needed here? */
1168 omap_start_dma(up->uart_dma.tx_dma_channel);
1169}
1170
1171static void uart_tx_dma_callback(int lch, u16 ch_status, void *data)
1172{
1173 struct uart_omap_port *up = (struct uart_omap_port *)data;
1174 struct circ_buf *xmit = &up->port.state->xmit;
1175
1176 xmit->tail = (xmit->tail + up->uart_dma.tx_buf_size) & \
1177 (UART_XMIT_SIZE - 1);
1178 up->port.icount.tx += up->uart_dma.tx_buf_size;
1179
1180 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
1181 uart_write_wakeup(&up->port);
1182
1183 if (uart_circ_empty(xmit)) {
1184 spin_lock(&(up->uart_dma.tx_lock));
1185 serial_omap_stop_tx(&up->port);
1186 up->uart_dma.tx_dma_used = false;
1187 spin_unlock(&(up->uart_dma.tx_lock));
1188 } else {
1189 omap_stop_dma(up->uart_dma.tx_dma_channel);
1190 serial_omap_continue_tx(up);
1191 }
1192 up->port_activity = jiffies;
1193 return;
1194}
1195
1196static int serial_omap_probe(struct platform_device *pdev)
1197{
1198 struct uart_omap_port *up;
1199 struct resource *mem, *irq, *dma_tx, *dma_rx;
1200 struct omap_uart_port_info *omap_up_info = pdev->dev.platform_data;
1201 int ret = -ENOSPC;
1202
1203 mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1204 if (!mem) {
1205 dev_err(&pdev->dev, "no mem resource?\n");
1206 return -ENODEV;
1207 }
1208
1209 irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
1210 if (!irq) {
1211 dev_err(&pdev->dev, "no irq resource?\n");
1212 return -ENODEV;
1213 }
1214
1215 if (!request_mem_region(mem->start, (mem->end - mem->start) + 1,
1216 pdev->dev.driver->name)) {
1217 dev_err(&pdev->dev, "memory region already claimed\n");
1218 return -EBUSY;
1219 }
1220
1221 dma_rx = platform_get_resource_byname(pdev, IORESOURCE_DMA, "rx");
1222 if (!dma_rx) {
1223 ret = -EINVAL;
1224 goto err;
1225 }
1226
1227 dma_tx = platform_get_resource_byname(pdev, IORESOURCE_DMA, "tx");
1228 if (!dma_tx) {
1229 ret = -EINVAL;
1230 goto err;
1231 }
1232
1233 up = kzalloc(sizeof(*up), GFP_KERNEL);
1234 if (up == NULL) {
1235 ret = -ENOMEM;
1236 goto do_release_region;
1237 }
1238 sprintf(up->name, "OMAP UART%d", pdev->id);
1239 up->pdev = pdev;
1240 up->port.dev = &pdev->dev;
1241 up->port.type = PORT_OMAP;
1242 up->port.iotype = UPIO_MEM;
1243 up->port.irq = irq->start;
1244
1245 up->port.regshift = 2;
1246 up->port.fifosize = 64;
1247 up->port.ops = &serial_omap_pops;
1248 up->port.line = pdev->id;
1249
1250 up->port.membase = omap_up_info->membase;
1251 up->port.mapbase = omap_up_info->mapbase;
1252 up->port.flags = omap_up_info->flags;
1253 up->port.irqflags = omap_up_info->irqflags;
1254 up->port.uartclk = omap_up_info->uartclk;
1255 up->uart_dma.uart_base = mem->start;
1256
1257 if (omap_up_info->dma_enabled) {
1258 up->uart_dma.uart_dma_tx = dma_tx->start;
1259 up->uart_dma.uart_dma_rx = dma_rx->start;
1260 up->use_dma = 1;
1261 up->uart_dma.rx_buf_size = 4096;
1262 up->uart_dma.rx_timeout = 2;
1263 spin_lock_init(&(up->uart_dma.tx_lock));
1264 spin_lock_init(&(up->uart_dma.rx_lock));
1265 up->uart_dma.tx_dma_channel = OMAP_UART_DMA_CH_FREE;
1266 up->uart_dma.rx_dma_channel = OMAP_UART_DMA_CH_FREE;
1267 }
1268
1269 ui[pdev->id] = up;
1270 serial_omap_add_console_port(up);
1271
1272 ret = uart_add_one_port(&serial_omap_reg, &up->port);
1273 if (ret != 0)
1274 goto do_release_region;
1275
1276 platform_set_drvdata(pdev, up);
1277 return 0;
1278err:
1279 dev_err(&pdev->dev, "[UART%d]: failure [%s]: %d\n",
1280 pdev->id, __func__, ret);
1281do_release_region:
1282 release_mem_region(mem->start, (mem->end - mem->start) + 1);
1283 return ret;
1284}
1285
1286static int serial_omap_remove(struct platform_device *dev)
1287{
1288 struct uart_omap_port *up = platform_get_drvdata(dev);
1289
1290 platform_set_drvdata(dev, NULL);
1291 if (up) {
1292 uart_remove_one_port(&serial_omap_reg, &up->port);
1293 kfree(up);
1294 }
1295 return 0;
1296}
1297
1298static struct platform_driver serial_omap_driver = {
1299 .probe = serial_omap_probe,
1300 .remove = serial_omap_remove,
1301
1302 .suspend = serial_omap_suspend,
1303 .resume = serial_omap_resume,
1304 .driver = {
1305 .name = DRIVER_NAME,
1306 },
1307};
1308
1309static int __init serial_omap_init(void)
1310{
1311 int ret;
1312
1313 ret = uart_register_driver(&serial_omap_reg);
1314 if (ret != 0)
1315 return ret;
1316 ret = platform_driver_register(&serial_omap_driver);
1317 if (ret != 0)
1318 uart_unregister_driver(&serial_omap_reg);
1319 return ret;
1320}
1321
1322static void __exit serial_omap_exit(void)
1323{
1324 platform_driver_unregister(&serial_omap_driver);
1325 uart_unregister_driver(&serial_omap_reg);
1326}
1327
1328module_init(serial_omap_init);
1329module_exit(serial_omap_exit);
1330
1331MODULE_DESCRIPTION("OMAP High Speed UART driver");
1332MODULE_LICENSE("GPL");
1333MODULE_AUTHOR("Texas Instruments Inc");
generated by cgit v1.2.2 (git 2.25.0) at 2024-11-05 02:51:10 -0500