2 files changed, 21 insertions, 16 deletions

diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c
index a8bec498cad6..f97224ce59da 100644
--- a/drivers/serial/8250_pci.c
+++ b/drivers/serial/8250_pci.c
@@ -1214,13 +1214,6 @@ static struct pciserial_board pci_boards[] __devinitdata = {
                 .base_baud      = 115200,
                 .uart_offset    = 8,
         },
-        [pbn_b0_8_115200] = {
-                .flags          = FL_BASE0,
-                .num_ports      = 8,
-                .base_baud      = 115200,
-                .uart_offset    = 8,
-        },
-
         [pbn_b0_1_921600] = {
                 .flags          = FL_BASE0,
                 .num_ports      = 1,
diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c
index d57bf3e708d8..430997e33fc4 100644
--- a/drivers/serial/atmel_serial.c
+++ b/drivers/serial/atmel_serial.c
@@ -96,6 +96,7 @@
 
  /* PDC registers */
 #define UART_PUT_PTCR(port,v)   __raw_writel(v, (port)->membase + ATMEL_PDC_PTCR)
+#define UART_GET_TCR(port)      __raw_readl((port)->membase + ATMEL_PDC_TCR)
 #define UART_GET_PTSR(port)     __raw_readl((port)->membase + ATMEL_PDC_PTSR)
 
 #define UART_PUT_RPR(port,v)    __raw_writel(v, (port)->membase + ATMEL_PDC_RPR)
@@ -106,6 +107,7 @@
 
 #define UART_PUT_TPR(port,v)    __raw_writel(v, (port)->membase + ATMEL_PDC_TPR)
 #define UART_PUT_TCR(port,v)    __raw_writel(v, (port)->membase + ATMEL_PDC_TCR)
+#define UART_GET_TCR(port)      __raw_readl((port)->membase + ATMEL_PDC_TCR)
 
 static int (*atmel_open_hook)(struct uart_port *);
 static void (*atmel_close_hook)(struct uart_port *);
@@ -562,17 +564,22 @@ static void atmel_tx_dma(struct uart_port *port)
         struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx;
         int count;
 
+        /* nothing left to transmit? */
+        if (UART_GET_TCR(port))
+                return;
+
         xmit->tail += pdc->ofs;
         xmit->tail &= UART_XMIT_SIZE - 1;
 
         port->icount.tx += pdc->ofs;
         pdc->ofs = 0;
 
-        if (!uart_circ_empty(xmit)) {
-                /* more to transmit - setup next transfer */
+        /* more to transmit - setup next transfer */
 
-                /* disable PDC transmit */
-                UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS);
+        /* disable PDC transmit */
+        UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS);
+
+        if (!uart_circ_empty(xmit)) {
                 dma_sync_single_for_device(port->dev,
                                            pdc->dma_addr,
                                            pdc->dma_size,
@@ -586,11 +593,6 @@ static void atmel_tx_dma(struct uart_port *port)
                 /* re-enable PDC transmit and interrupts */
                 UART_PUT_PTCR(port, ATMEL_PDC_TXTEN);
                 UART_PUT_IER(port, ATMEL_US_ENDTX | ATMEL_US_TXBUFE);
-        } else {
-                /* nothing left to transmit - disable the transmitter */
-
-                /* disable PDC transmit */
-                UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS);
         }
 
         if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
@@ -1274,6 +1276,7 @@ static void atmel_console_write(struct console *co, const char *s, u_int count)
 {
         struct uart_port *port = &atmel_ports[co->index].uart;
         unsigned int status, imr;
+        unsigned int pdc_tx;
 
         /*
          * First, save IMR and then disable interrupts
@@ -1281,6 +1284,10 @@ static void atmel_console_write(struct console *co, const char *s, u_int count)
         imr = UART_GET_IMR(port);
         UART_PUT_IDR(port, ATMEL_US_RXRDY | ATMEL_US_TXRDY);
 
+        /* Store PDC transmit status and disable it */
+        pdc_tx = UART_GET_PTSR(port) & ATMEL_PDC_TXTEN;
+        UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS);
+
         uart_console_write(port, s, count, atmel_console_putchar);
 
         /*
@@ -1290,6 +1297,11 @@ static void atmel_console_write(struct console *co, const char *s, u_int count)
         do {
                 status = UART_GET_CSR(port);
         } while (!(status & ATMEL_US_TXRDY));
+
+        /* Restore PDC transmit status */
+        if (pdc_tx)
+                UART_PUT_PTCR(port, ATMEL_PDC_TXTEN);
+
         /* set interrupts back the way they were */
         UART_PUT_IER(port, imr);
 }