1 files changed, 24 insertions, 0 deletions

diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c
index d63fad7363b7..59a221f9ee9c 100644
--- a/drivers/serial/bfin_5xx.c
+++ b/drivers/serial/bfin_5xx.c
@@ -73,6 +73,8 @@ static void bfin_serial_tx_chars(struct bfin_serial_port *uart);
 
 static void bfin_serial_mctrl_check(struct bfin_serial_port *uart);
 
+static void bfin_serial_reset_irda(struct uart_port *port);
+
 /*
  * interrupts are disabled on entry
  */
@@ -105,6 +107,14 @@ static void bfin_serial_stop_tx(struct uart_port *port)
 static void bfin_serial_start_tx(struct uart_port *port)
 {
         struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
+        struct tty_struct *tty = uart->port.info->port.tty;
+
+        /*
+         * To avoid losting RX interrupt, we reset IR function
+         * before sending data.
+         */
+        if (tty->termios->c_line == N_IRDA)
+                bfin_serial_reset_irda(port);
 
 #ifdef CONFIG_SERIAL_BFIN_DMA
         if (uart->tx_done)
@@ -890,6 +900,20 @@ static int bfin_kgdboc_port_startup(struct uart_port *port)
 }
 #endif
 
+static void bfin_serial_reset_irda(struct uart_port *port)
+{
+        int line = port->line;
+        unsigned short val;
+
+        val = UART_GET_GCTL(&bfin_serial_ports[line]);
+        val &= ~(IREN | RPOLC);
+        UART_PUT_GCTL(&bfin_serial_ports[line], val);
+        SSYNC();
+        val |= (IREN | RPOLC);
+        UART_PUT_GCTL(&bfin_serial_ports[line], val);
+        SSYNC();
+}
+
 static struct uart_ops bfin_serial_pops = {
         .tx_empty       = bfin_serial_tx_empty,
         .set_mctrl      = bfin_serial_set_mctrl,