8 files changed, 130 insertions, 74 deletions

diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index 0995430e4cf1..0ae9ced00ed4 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -299,6 +299,7 @@ static inline int map_8250_out_reg(struct uart_8250_port *up, int offset)
 
 static unsigned int serial_in(struct uart_8250_port *up, int offset)
 {
+        unsigned int tmp;
         offset = map_8250_in_reg(up, offset) << up->port.regshift;
 
         switch (up->port.iotype) {
@@ -317,6 +318,13 @@ static unsigned int serial_in(struct uart_8250_port *up, int offset)
                 return __raw_readl(up->port.membase + offset);
 #endif
 
+        case UPIO_TSI:
+                if (offset == UART_IIR) {
+                        tmp = readl((u32 *)(up->port.membase + UART_RX));
+                        return (cpu_to_le32(tmp) >> 8) & 0xff;
+                } else
+                        return readb(up->port.membase + offset);
+
         default:
                 return inb(up->port.iobase + offset);
         }
@@ -346,6 +354,10 @@ serial_out(struct uart_8250_port *up, int offset, int value)
                 __raw_writel(value, up->port.membase + offset);
                 break;
 #endif
+        case UPIO_TSI:
+                if (!((offset == UART_IER) && (value & UART_IER_UUE)))
+                        writeb(value, up->port.membase + offset);
+                break;
 
         default:
                 outb(value, up->port.iobase + offset);
@@ -2240,10 +2252,14 @@ serial8250_console_write(struct console *co, const char *s, unsigned int count)
 
         touch_nmi_watchdog();
 
-        if (oops_in_progress) {
-                locked = spin_trylock_irqsave(&up->port.lock, flags);
+        local_irq_save(flags);
+        if (up->port.sysrq) {
+                /* serial8250_handle_port() already took the lock */
+                locked = 0;
+        } else if (oops_in_progress) {
+                locked = spin_trylock(&up->port.lock);
         } else
-                spin_lock_irqsave(&up->port.lock, flags);
+                spin_lock(&up->port.lock);
 
         /*
          *      First save the IER then disable the interrupts
@@ -2265,7 +2281,8 @@ serial8250_console_write(struct console *co, const char *s, unsigned int count)
         serial_out(up, UART_IER, ier);
 
         if (locked)
-                spin_unlock_irqrestore(&up->port.lock, flags);
+                spin_unlock(&up->port.lock);
+        local_irq_restore(flags);
 }
 
 static int serial8250_console_setup(struct console *co, char *options)
diff --git a/drivers/serial/dz.c b/drivers/serial/dz.c
index d119c8296a78..8a98aae80e22 100644
--- a/drivers/serial/dz.c
+++ b/drivers/serial/dz.c
@@ -673,7 +673,7 @@ static void dz_reset(struct dz_port *dport)
 }
 
 #ifdef CONFIG_SERIAL_DZ_CONSOLE
-static void dz_console_putchar(struct uart_port *port, int ch)
+static void dz_console_putchar(struct uart_port *uport, int ch)
 {
         struct dz_port *dport = (struct dz_port *)uport;
         unsigned long flags;
diff --git a/drivers/serial/ip22zilog.c b/drivers/serial/ip22zilog.c
index 342042889f6e..5ff269fb604c 100644
--- a/drivers/serial/ip22zilog.c
+++ b/drivers/serial/ip22zilog.c
@@ -1143,9 +1143,8 @@ static void __init ip22zilog_prepare(void)
                 up[(chip * 2) + 1].port.fifosize = 1;
                 up[(chip * 2) + 1].port.ops = &ip22zilog_pops;
                 up[(chip * 2) + 1].port.type = PORT_IP22ZILOG;
-                up[(chip * 2) + 1].port.flags |= IP22ZILOG_FLAG_IS_CHANNEL_A;
                 up[(chip * 2) + 1].port.line = (chip * 2) + 1;
-                up[(chip * 2) + 1].flags = 0;
+                up[(chip * 2) + 1].flags |= IP22ZILOG_FLAG_IS_CHANNEL_A;
         }
 }
 
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index d5f636fbf29a..80ef7d482756 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -2036,6 +2036,7 @@ uart_report_port(struct uart_driver *drv, struct uart_port *port)
         case UPIO_MEM:
         case UPIO_MEM32:
         case UPIO_AU:
+        case UPIO_TSI:
                 snprintf(address, sizeof(address),
                          "MMIO 0x%lx", port->mapbase);
                 break;
diff --git a/drivers/serial/sunsab.c b/drivers/serial/sunsab.c
index 0dbd4df44c05..dc673e1b6fd9 100644
--- a/drivers/serial/sunsab.c
+++ b/drivers/serial/sunsab.c
@@ -1047,12 +1047,13 @@ static int __devinit sab_probe(struct of_device *op, const struct of_device_id *
         up = &sunsab_ports[inst * 2];
 
         err = sunsab_init_one(&up[0], op,
-                              sizeof(union sab82532_async_regs),
+                              0,
                               (inst * 2) + 0);
         if (err)
                 return err;
 
-        err = sunsab_init_one(&up[0], op, 0,
+        err = sunsab_init_one(&up[1], op,
+                              sizeof(union sab82532_async_regs),
                               (inst * 2) + 1);
         if (err) {
                 of_iounmap(up[0].port.membase,
@@ -1117,7 +1118,7 @@ static int __init sunsab_init(void)
         int err;
 
         num_channels = 0;
-        for_each_node_by_name(dp, "su")
+        for_each_node_by_name(dp, "se")
                 num_channels += 2;
         for_each_node_by_name(dp, "serial") {
                 if (of_device_is_compatible(dp, "sab82532"))
diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c
index f9013baba05b..d3a5aeee73a3 100644
--- a/drivers/serial/sunsu.c
+++ b/drivers/serial/sunsu.c
@@ -1200,6 +1200,11 @@ static int __init sunsu_kbd_ms_init(struct uart_sunsu_port *up)
         if (up->port.type == PORT_UNKNOWN)
                 return -ENODEV;
 
+        printk("%s: %s port at %lx, irq %u\n",
+               to_of_device(up->port.dev)->node->full_name,
+               (up->su_type == SU_PORT_KBD) ? "Keyboard" : "Mouse",
+               up->port.mapbase, up->port.irq);
+
 #ifdef CONFIG_SERIO
         serio = &up->serio;
         serio->port_data = up;
@@ -1406,25 +1411,35 @@ static int __devinit su_probe(struct of_device *op, const struct of_device_id *m
         struct device_node *dp = op->node;
         struct uart_sunsu_port *up;
         struct resource *rp;
+        enum su_type type;
         int err;
 
-        if (inst >= UART_NR)
-                return -EINVAL;
+        type = su_get_type(dp);
+        if (type == SU_PORT_PORT) {
+                if (inst >= UART_NR)
+                        return -EINVAL;
+                up = &sunsu_ports[inst];
+        } else {
+                up = kzalloc(sizeof(*up), GFP_KERNEL);
+                if (!up)
+                        return -ENOMEM;
+        }
 
-        up = &sunsu_ports[inst];
         up->port.line = inst;
 
         spin_lock_init(&up->port.lock);
 
-        up->su_type = su_get_type(dp);
+        up->su_type = type;
 
         rp = &op->resource[0];
-        up->port.mapbase = op->resource[0].start;
-
+        up->port.mapbase = rp->start;
         up->reg_size = (rp->end - rp->start) + 1;
         up->port.membase = of_ioremap(rp, 0, up->reg_size, "su");
-        if (!up->port.membase)
+        if (!up->port.membase) {
+                if (type != SU_PORT_PORT)
+                        kfree(up);
                 return -ENOMEM;
+        }
 
         up->port.irq = op->irqs[0];
 
@@ -1436,8 +1451,11 @@ static int __devinit su_probe(struct of_device *op, const struct of_device_id *m
         err = 0;
         if (up->su_type == SU_PORT_KBD || up->su_type == SU_PORT_MS) {
                 err = sunsu_kbd_ms_init(up);
-                if (err)
+                if (err) {
+                        kfree(up);
                         goto out_unmap;
+                }
+                dev_set_drvdata(&op->dev, up);
 
                 return 0;
         }
@@ -1476,8 +1494,12 @@ static int __devexit su_remove(struct of_device *dev)
 #ifdef CONFIG_SERIO
                 serio_unregister_port(&up->serio);
 #endif
-        } else if (up->port.type != PORT_UNKNOWN)
+                kfree(up);
+        } else if (up->port.type != PORT_UNKNOWN) {
                 uart_remove_one_port(&sunsu_reg, &up->port);
+        }
+
+        dev_set_drvdata(&dev->dev, NULL);
 
         return 0;
 }
diff --git a/drivers/serial/sunzilog.c b/drivers/serial/sunzilog.c
index a1456d9352cb..47bc3d57e019 100644
--- a/drivers/serial/sunzilog.c
+++ b/drivers/serial/sunzilog.c
@@ -68,9 +68,6 @@ static int num_sunzilog;
 #define NUM_SUNZILOG    num_sunzilog
 #define NUM_CHANNELS    (NUM_SUNZILOG * 2)
 
-#define KEYBOARD_LINE 0x2
-#define MOUSE_LINE    0x3
-
 #define ZS_CLOCK                4915200 /* Zilog input clock rate. */
 #define ZS_CLOCK_DIVISOR        16      /* Divisor this driver uses. */
 
@@ -1225,12 +1222,10 @@ static void __init sunzilog_init_kbdms(struct uart_sunzilog_port *up, int channe
 {
         int baud, brg;
 
-        if (channel == KEYBOARD_LINE) {
-                up->flags |= SUNZILOG_FLAG_CONS_KEYB;
+        if (up->flags & SUNZILOG_FLAG_CONS_KEYB) {
                 up->cflag = B1200 | CS8 | CLOCAL | CREAD;
                 baud = 1200;
         } else {
-                up->flags |= SUNZILOG_FLAG_CONS_MOUSE;
                 up->cflag = B4800 | CS8 | CLOCAL | CREAD;
                 baud = 4800;
         }
@@ -1243,14 +1238,14 @@ static void __init sunzilog_init_kbdms(struct uart_sunzilog_port *up, int channe
 }
 
 #ifdef CONFIG_SERIO
-static void __init sunzilog_register_serio(struct uart_sunzilog_port *up, int channel)
+static void __init sunzilog_register_serio(struct uart_sunzilog_port *up)
 {
         struct serio *serio = &up->serio;
 
         serio->port_data = up;
 
         serio->id.type = SERIO_RS232;
-        if (channel == KEYBOARD_LINE) {
+        if (up->flags & SUNZILOG_FLAG_CONS_KEYB) {
                 serio->id.proto = SERIO_SUNKBD;
                 strlcpy(serio->name, "zskbd", sizeof(serio->name));
         } else {
@@ -1259,7 +1254,8 @@ static void __init sunzilog_register_serio(struct uart_sunzilog_port *up, int ch
                 strlcpy(serio->name, "zsms", sizeof(serio->name));
         }
         strlcpy(serio->phys,
-                (channel == KEYBOARD_LINE ? "zs/serio0" : "zs/serio1"),
+                ((up->flags & SUNZILOG_FLAG_CONS_KEYB) ?
+                 "zs/serio0" : "zs/serio1"),
                 sizeof(serio->phys));
 
         serio->write = sunzilog_serio_write;
@@ -1286,8 +1282,8 @@ static void __init sunzilog_init_hw(struct uart_sunzilog_port *up)
                 (void) read_zsreg(channel, R0);
         }
 
-        if (up->port.line == KEYBOARD_LINE ||
-            up->port.line == MOUSE_LINE) {
+        if (up->flags & (SUNZILOG_FLAG_CONS_KEYB |
+                         SUNZILOG_FLAG_CONS_MOUSE)) {
                 sunzilog_init_kbdms(up, up->port.line);
                 up->curregs[R9] |= (NV | MIE);
                 write_zsreg(channel, R9, up->curregs[R9]);
@@ -1313,37 +1309,26 @@ static void __init sunzilog_init_hw(struct uart_sunzilog_port *up)
         spin_unlock_irqrestore(&up->port.lock, flags);
 
 #ifdef CONFIG_SERIO
-        if (up->port.line == KEYBOARD_LINE || up->port.line == MOUSE_LINE)
-                sunzilog_register_serio(up, up->port.line);
+        if (up->flags & (SUNZILOG_FLAG_CONS_KEYB |
+                         SUNZILOG_FLAG_CONS_MOUSE))
+                sunzilog_register_serio(up);
 #endif
 }
 
-static int __devinit zs_get_instance(struct device_node *dp)
-{
-        int ret;
-
-        ret = of_getintprop_default(dp, "slave", -1);
-        if (ret != -1)
-                return ret;
-
-        if (of_find_property(dp, "keyboard", NULL))
-                ret = 1;
-        else
-                ret = 0;
-
-        return ret;
-}
-
 static int zilog_irq = -1;
 
-static int __devinit zs_probe(struct of_device *dev, const struct of_device_id *match)
+static int __devinit zs_probe(struct of_device *op, const struct of_device_id *match)
 {
-        struct of_device *op = to_of_device(&dev->dev);
+        static int inst;
         struct uart_sunzilog_port *up;
         struct zilog_layout __iomem *rp;
-        int inst = zs_get_instance(dev->node);
+        int keyboard_mouse;
         int err;
 
+        keyboard_mouse = 0;
+        if (of_find_property(op->node, "keyboard", NULL))
+                keyboard_mouse = 1;
+
         sunzilog_chip_regs[inst] = of_ioremap(&op->resource[0], 0,
                                               sizeof(struct zilog_layout),
                                               "zs");
@@ -1352,16 +1337,8 @@ static int __devinit zs_probe(struct of_device *dev, const struct of_device_id *
 
         rp = sunzilog_chip_regs[inst];
 
-        if (zilog_irq == -1) {
+        if (zilog_irq == -1)
                 zilog_irq = op->irqs[0];
-                err = request_irq(zilog_irq, sunzilog_interrupt, IRQF_SHARED,
-                                  "zs", sunzilog_irq_chain);
-                if (err) {
-                        of_iounmap(rp, sizeof(struct zilog_layout));
-
-                        return err;
-                }
-        }
 
         up = &sunzilog_port_table[inst * 2];
 
@@ -1378,7 +1355,7 @@ static int __devinit zs_probe(struct of_device *dev, const struct of_device_id *
         up[0].port.line = (inst * 2) + 0;
         up[0].port.dev = &op->dev;
         up[0].flags |= SUNZILOG_FLAG_IS_CHANNEL_A;
-        if (inst == 1)
+        if (keyboard_mouse)
                 up[0].flags |= SUNZILOG_FLAG_CONS_KEYB;
         sunzilog_init_hw(&up[0]);
 
@@ -1395,11 +1372,11 @@ static int __devinit zs_probe(struct of_device *dev, const struct of_device_id *
         up[1].port.line = (inst * 2) + 1;
         up[1].port.dev = &op->dev;
         up[1].flags |= 0;
-        if (inst == 1)
+        if (keyboard_mouse)
                 up[1].flags |= SUNZILOG_FLAG_CONS_MOUSE;
         sunzilog_init_hw(&up[1]);
 
-        if (inst != 1) {
+        if (!keyboard_mouse) {
                 err = uart_add_one_port(&sunzilog_reg, &up[0].port);
                 if (err) {
                         of_iounmap(rp, sizeof(struct zilog_layout));
@@ -1411,9 +1388,18 @@ static int __devinit zs_probe(struct of_device *dev, const struct of_device_id *
                         of_iounmap(rp, sizeof(struct zilog_layout));
                         return err;
                 }
+        } else {
+                printk(KERN_INFO "%s: Keyboard at MMIO %lx (irq = %d) "
+                       "is a zs\n",
+                       op->dev.bus_id, up[0].port.mapbase, op->irqs[0]);
+                printk(KERN_INFO "%s: Mouse at MMIO %lx (irq = %d) "
+                       "is a zs\n",
+                       op->dev.bus_id, up[1].port.mapbase, op->irqs[0]);
         }
 
-        dev_set_drvdata(&dev->dev, &up[0]);
+        dev_set_drvdata(&op->dev, &up[0]);
+
+        inst++;
 
         return 0;
 }
@@ -1462,36 +1448,65 @@ static struct of_platform_driver zs_driver = {
 static int __init sunzilog_init(void)
 {
         struct device_node *dp;
-        int err;
+        int err, uart_count;
+        int num_keybms;
 
         NUM_SUNZILOG = 0;
-        for_each_node_by_name(dp, "zs")
+        num_keybms = 0;
+        for_each_node_by_name(dp, "zs") {
                 NUM_SUNZILOG++;
+                if (of_find_property(dp, "keyboard", NULL))
+                        num_keybms++;
+        }
 
+        uart_count = 0;
         if (NUM_SUNZILOG) {
                 int uart_count;
 
                 err = sunzilog_alloc_tables();
                 if (err)
-                        return err;
+                        goto out;
 
-                /* Subtract 1 for keyboard, 1 for mouse.  */
-                uart_count = (NUM_SUNZILOG * 2) - 2;
+                uart_count = (NUM_SUNZILOG * 2) - (2 * num_keybms);
 
                 sunzilog_reg.nr = uart_count;
                 sunzilog_reg.minor = sunserial_current_minor;
                 err = uart_register_driver(&sunzilog_reg);
-                if (err) {
-                        sunzilog_free_tables();
-                        return err;
-                }
+                if (err)
+                        goto out_free_tables;
+
                 sunzilog_reg.tty_driver->name_base = sunzilog_reg.minor - 64;
                 sunzilog_reg.cons = SUNZILOG_CONSOLE();
 
                 sunserial_current_minor += uart_count;
         }
 
-        return of_register_driver(&zs_driver, &of_bus_type);
+        err = of_register_driver(&zs_driver, &of_bus_type);
+        if (err)
+                goto out_unregister_uart;
+
+        if (zilog_irq != -1) {
+                err = request_irq(zilog_irq, sunzilog_interrupt, IRQF_SHARED,
+                                  "zs", sunzilog_irq_chain);
+                if (err)
+                        goto out_unregister_driver;
+        }
+
+out:
+        return err;
+
+out_unregister_driver:
+        of_unregister_driver(&zs_driver);
+
+out_unregister_uart:
+        if (NUM_SUNZILOG) {
+                uart_unregister_driver(&sunzilog_reg);
+                sunzilog_reg.cons = NULL;
+        }
+
+out_free_tables:
+        sunzilog_free_tables();
+        goto out;
 }
 
 static void __exit sunzilog_exit(void)
diff --git a/drivers/serial/vr41xx_siu.c b/drivers/serial/vr41xx_siu.c
index e93d0edc2e08..6c8b0ea83c3c 100644
--- a/drivers/serial/vr41xx_siu.c
+++ b/drivers/serial/vr41xx_siu.c
@@ -38,6 +38,7 @@
 #include <linux/tty_flip.h>
 
 #include <asm/io.h>
+#include <asm/vr41xx/irq.h>
 #include <asm/vr41xx/siu.h>
 #include <asm/vr41xx/vr41xx.h>