7 files changed, 62 insertions, 27 deletions

diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c
index 356f5556759a..07f05e9d0955 100644
--- a/drivers/serial/8250_pci.c
+++ b/drivers/serial/8250_pci.c
@@ -1029,6 +1029,8 @@ enum pci_board_num_t {
         pbn_b0_2_921600,
         pbn_b0_4_921600,
 
+        pbn_b0_2_1130000,
+
         pbn_b0_4_1152000,
 
         pbn_b0_bt_1_115200,
@@ -1163,6 +1165,14 @@ static struct pci_board pci_boards[] __devinitdata = {
                 .base_baud      = 921600,
                 .uart_offset    = 8,
         },
+
+        [pbn_b0_2_1130000] = {
+                .flags          = FL_BASE0,
+                .num_ports      = 2,
+                .base_baud      = 1130000,
+                .uart_offset    = 8,
+        },
+
         [pbn_b0_4_1152000] = {
                 .flags          = FL_BASE0,
                 .num_ports      = 4,
@@ -1988,6 +1998,16 @@ static struct pci_device_id serial_pci_tbl[] = {
         {       PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954,
                 PCI_SUBVENDOR_ID_SIIG, PCI_SUBDEVICE_ID_SIIG_QUARTET_SERIAL, 0, 0,
                 pbn_b0_4_1152000 },
+
+                /*
+                 * The below card is a little controversial since it is the
+                 * subject of a PCI vendor/device ID clash.  (See
+                 * www.ussg.iu.edu/hypermail/linux/kernel/0303.1/0516.html).
+                 * For now just used the hex ID 0x950a.
+                 */
+        {       PCI_VENDOR_ID_OXSEMI, 0x950a,
+                PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+                pbn_b0_2_1130000 },
         {       PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954,
                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
                 pbn_b0_4_115200 },
diff --git a/drivers/serial/8250_pnp.c b/drivers/serial/8250_pnp.c
index 18c58fb73899..6b321e82cafb 100644
--- a/drivers/serial/8250_pnp.c
+++ b/drivers/serial/8250_pnp.c
@@ -394,7 +394,7 @@ static int __devinit serial_pnp_guess_board(struct pnp_dev *dev, int *flags)
 }
 
 static int __devinit
-serial_pnp_probe(struct pnp_dev * dev, const struct pnp_device_id *dev_id)
+serial_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id)
 {
         struct uart_port port;
         int ret, line, flags = dev_id->driver_data;
@@ -406,15 +406,23 @@ serial_pnp_probe(struct pnp_dev * dev, const struct pnp_device_id *dev_id)
         }
 
         memset(&port, 0, sizeof(struct uart_port));
-        port.irq = pnp_irq(dev,0);
-        port.iobase = pnp_port_start(dev, 0);
+        port.irq = pnp_irq(dev, 0);
+        if (pnp_port_valid(dev, 0)) {
+                port.iobase = pnp_port_start(dev, 0);
+                port.iotype = UPIO_PORT;
+        } else if (pnp_mem_valid(dev, 0)) {
+                port.mapbase = pnp_mem_start(dev, 0);
+                port.iotype = UPIO_MEM;
+                port.flags = UPF_IOREMAP;
+        } else
+                return -ENODEV;
 
 #ifdef SERIAL_DEBUG_PNP
-        printk("Setup PNP port: port %x, irq %d, type %d\n",
-               port.iobase, port.irq, port.iotype);
+        printk("Setup PNP port: port %x, mem 0x%lx, irq %d, type %d\n",
+               port.iobase, port.mapbase, port.irq, port.iotype);
 #endif
 
-        port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF;
+        port.flags |= UPF_SKIP_TEST | UPF_BOOT_AUTOCONF;
         port.uartclk = 1843200;
         port.dev = &dev->dev;
 
@@ -426,7 +434,7 @@ serial_pnp_probe(struct pnp_dev * dev, const struct pnp_device_id *dev_id)
 
 }
 
-static void __devexit serial_pnp_remove(struct pnp_dev * dev)
+static void __devexit serial_pnp_remove(struct pnp_dev *dev)
 {
         long line = (long)pnp_get_drvdata(dev);
         if (line)
diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm1.c b/drivers/serial/cpm_uart/cpm_uart_cpm1.c
index 7911912f50c7..8efbd6d1d6a4 100644
--- a/drivers/serial/cpm_uart/cpm_uart_cpm1.c
+++ b/drivers/serial/cpm_uart/cpm_uart_cpm1.c
@@ -185,7 +185,7 @@ int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con)
         memsz = L1_CACHE_ALIGN(pinfo->rx_nrfifos * pinfo->rx_fifosize) +
             L1_CACHE_ALIGN(pinfo->tx_nrfifos * pinfo->tx_fifosize);
         if (is_con) {
-                mem_addr = (u8 *) m8xx_cpm_hostalloc(memsz);
+                mem_addr = (u8 *) cpm_dpram_addr(cpm_dpalloc(memsz, 8));
                 dma_addr = 0;
         } else
                 mem_addr = dma_alloc_coherent(NULL, memsz, &dma_addr,
diff --git a/drivers/serial/jsm/jsm.h b/drivers/serial/jsm/jsm.h
index 5bf3c45521f4..18753193f59b 100644
--- a/drivers/serial/jsm/jsm.h
+++ b/drivers/serial/jsm/jsm.h
@@ -89,7 +89,7 @@ enum {
 #define WRITEBUFLEN     ((4096) + 4)
 #define MYFLIPLEN       N_TTY_BUF_SIZE
 
-#define JSM_VERSION     "jsm: 1.1-1-INKERNEL"
+#define JSM_VERSION     "jsm: 1.2-1-INKERNEL"
 #define JSM_PARTNUM     "40002438_A-INKERNEL"
 
 struct jsm_board;
diff --git a/drivers/serial/jsm/jsm_driver.c b/drivers/serial/jsm/jsm_driver.c
index cc5d21300ed3..7e56c7824194 100644
--- a/drivers/serial/jsm/jsm_driver.c
+++ b/drivers/serial/jsm/jsm_driver.c
@@ -22,6 +22,7 @@
  * Scott H Kilau <Scott_Kilau@digi.com>
  * Wendy Xiong   <wendyx@us.ltcfwd.linux.ibm.com>
  *
+ *
  ***********************************************************************/
 #include <linux/moduleparam.h>
 #include <linux/pci.h>
@@ -42,7 +43,7 @@ struct uart_driver jsm_uart_driver = {
         .owner          = THIS_MODULE,
         .driver_name    = JSM_DRIVER_NAME,
         .dev_name       = "ttyn",
-        .major          = 253,
+        .major          = 0,
         .minor          = JSM_MINOR_START,
         .nr             = NR_PORTS,
 };
diff --git a/drivers/serial/jsm/jsm_neo.c b/drivers/serial/jsm/jsm_neo.c
index 3a11a69feb44..6f22b42d9337 100644
--- a/drivers/serial/jsm/jsm_neo.c
+++ b/drivers/serial/jsm/jsm_neo.c
@@ -48,8 +48,9 @@ static inline void neo_pci_posting_flush(struct jsm_board *bd)
 
 static void neo_set_cts_flow_control(struct jsm_channel *ch)
 {
-        u8 ier = readb(&ch->ch_neo_uart->ier);
-        u8 efr = readb(&ch->ch_neo_uart->efr);
+        u8 ier, efr;
+        ier = readb(&ch->ch_neo_uart->ier);
+        efr = readb(&ch->ch_neo_uart->efr);
 
         jsm_printk(PARAM, INFO, &ch->ch_bd->pci_dev, "Setting CTSFLOW\n");
 
@@ -78,8 +79,9 @@ static void neo_set_cts_flow_control(struct jsm_channel *ch)
 
 static void neo_set_rts_flow_control(struct jsm_channel *ch)
 {
-        u8 ier = readb(&ch->ch_neo_uart->ier);
-        u8 efr = readb(&ch->ch_neo_uart->efr);
+        u8 ier, efr;
+        ier = readb(&ch->ch_neo_uart->ier);
+        efr = readb(&ch->ch_neo_uart->efr);
 
         jsm_printk(PARAM, INFO, &ch->ch_bd->pci_dev, "Setting RTSFLOW\n");
 
@@ -117,8 +119,9 @@ static void neo_set_rts_flow_control(struct jsm_channel *ch)
 
 static void neo_set_ixon_flow_control(struct jsm_channel *ch)
 {
-        u8 ier = readb(&ch->ch_neo_uart->ier);
-        u8 efr = readb(&ch->ch_neo_uart->efr);
+        u8 ier, efr;
+        ier = readb(&ch->ch_neo_uart->ier);
+        efr = readb(&ch->ch_neo_uart->efr);
 
         jsm_printk(PARAM, INFO, &ch->ch_bd->pci_dev, "Setting IXON FLOW\n");
 
@@ -153,8 +156,9 @@ static void neo_set_ixon_flow_control(struct jsm_channel *ch)
 
 static void neo_set_ixoff_flow_control(struct jsm_channel *ch)
 {
-        u8 ier = readb(&ch->ch_neo_uart->ier);
-        u8 efr = readb(&ch->ch_neo_uart->efr);
+        u8 ier, efr;
+        ier = readb(&ch->ch_neo_uart->ier);
+        efr = readb(&ch->ch_neo_uart->efr);
 
         jsm_printk(PARAM, INFO, &ch->ch_bd->pci_dev, "Setting IXOFF FLOW\n");
 
@@ -190,8 +194,9 @@ static void neo_set_ixoff_flow_control(struct jsm_channel *ch)
 
 static void neo_set_no_input_flow_control(struct jsm_channel *ch)
 {
-        u8 ier = readb(&ch->ch_neo_uart->ier);
-        u8 efr = readb(&ch->ch_neo_uart->efr);
+        u8 ier, efr;
+        ier = readb(&ch->ch_neo_uart->ier);
+        efr = readb(&ch->ch_neo_uart->efr);
 
         jsm_printk(PARAM, INFO, &ch->ch_bd->pci_dev, "Unsetting Input FLOW\n");
 
@@ -228,8 +233,9 @@ static void neo_set_no_input_flow_control(struct jsm_channel *ch)
 
 static void neo_set_no_output_flow_control(struct jsm_channel *ch)
 {
-        u8 ier = readb(&ch->ch_neo_uart->ier);
-        u8 efr = readb(&ch->ch_neo_uart->efr);
+        u8 ier, efr;
+        ier = readb(&ch->ch_neo_uart->ier);
+        efr = readb(&ch->ch_neo_uart->efr);
 
         jsm_printk(PARAM, INFO, &ch->ch_bd->pci_dev, "Unsetting Output FLOW\n");
 
diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c
index de0136cc5938..1ae0b381c162 100644
--- a/drivers/serial/serial_cs.c
+++ b/drivers/serial/serial_cs.c
@@ -790,19 +790,19 @@ static struct pcmcia_device_id serial_ids[] = {
         PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM56", 0x2e3ee845, 0xa650c32a),
         PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "REM10", 0x2e3ee845, 0x76df1d29),
         PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "XEM5600", 0x2e3ee845, 0xf1403719),
-        PCMCIA_PFC_DEVICE_PROD_ID12(1, "AnyCom", "Fast Ethernet ", 0x578ba6e7, 0x02d92d1e),
+        PCMCIA_PFC_DEVICE_PROD_ID12(1, "AnyCom", "Fast Ethernet + 56K COMBO", 0x578ba6e7, 0xb0ac62c4),
         PCMCIA_PFC_DEVICE_PROD_ID12(1, "D-Link", "DME336T", 0x1a424a1c, 0xb23897ff),
         PCMCIA_PFC_DEVICE_PROD_ID12(1, "Gateway 2000", "XJEM3336", 0xdd9989be, 0x662c394c),
         PCMCIA_PFC_DEVICE_PROD_ID12(1, "Grey Cell", "GCS3000", 0x2a151fac, 0x48b932ae),
         PCMCIA_PFC_DEVICE_PROD_ID12(1, "Linksys", "EtherFast 10&100 + 56K PC Card (PCMLM56)", 0x0733cc81, 0xb3765033),
         PCMCIA_PFC_DEVICE_PROD_ID12(1, "LINKSYS", "PCMLM336", 0xf7cb0b07, 0x7a821b58),
         PCMCIA_PFC_DEVICE_PROD_ID12(1, "MEGAHERTZ", "XJEM1144/CCEM1144", 0xf510db04, 0x52d21e1e),
-        PCMCIA_PFC_DEVICE_PROD_ID12(1, "Ositech", "Trumpcard", 0x0c2f80cd, 0x0573c29f),
-        PCMCIA_PFC_DEVICE_PROD_ID12(1, "Ositech", "Trumpcard", 0x0c2f80cd, 0x0573c29f),
+        PCMCIA_PFC_DEVICE_PROD_ID12(1, "Ositech", "Trumpcard:Jack of Diamonds Modem+Ethernet", 0xc2f80cd, 0x656947b9),
+        PCMCIA_PFC_DEVICE_PROD_ID12(1, "Ositech", "Trumpcard:Jack of Hearts Modem+Ethernet", 0xc2f80cd, 0xdc9ba5ed),
         PCMCIA_PFC_DEVICE_PROD_ID12(1, "PCMCIAs", "ComboCard", 0xdcfe12d3, 0xcd8906cc),
         PCMCIA_PFC_DEVICE_PROD_ID12(1, "PCMCIAs", "LanModem", 0xdcfe12d3, 0xc67c648f),
         PCMCIA_PFC_DEVICE_PROD_ID12(1, "TDK", "GlobalNetworker 3410/3412", 0x1eae9475, 0xd9a93bed),
-        PCMCIA_PFC_DEVICE_PROD_ID12(1, "Xircom", "CreditCard Ethernet", 0x2e3ee845, 0xc0e778c2),
+        PCMCIA_PFC_DEVICE_PROD_ID12(1, "Xircom", "CreditCard Ethernet+Modem II", 0x2e3ee845, 0xeca401bf),
         PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x0104, 0x0070),
         PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0101, 0x0562),
         PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0104, 0x0070),
@@ -840,7 +840,7 @@ static struct pcmcia_device_id serial_ids[] = {
         PCMCIA_DEVICE_PROD_ID12("Computerboards, Inc.", "PCM-COM422", 0xd0b78f51, 0x7e2d49ed),
         PCMCIA_DEVICE_PROD_ID12("Dr. Neuhaus", "FURY CARD 14K4", 0x76942813, 0x8b96ce65),
         PCMCIA_DEVICE_PROD_ID12("Intelligent", "ANGIA FAX/MODEM", 0xb496e65e, 0xf31602a6),
-        PCMCIA_DEVICE_PROD_ID12("Intel", "MODEM 2400", 0x816cc815, 0x23539b80),
+        PCMCIA_DEVICE_PROD_ID12("Intel", "MODEM 2400+", 0x816cc815, 0x412729fb),
         PCMCIA_DEVICE_PROD_ID12("IOTech Inc ", "PCMCIA Dual RS-232 Serial Port Card", 0x3bd2d898, 0x92abc92f),
         PCMCIA_DEVICE_PROD_ID12("MACRONIX", "FAX/MODEM", 0x668388b3, 0x3f9bdf2f),
         PCMCIA_DEVICE_PROD_ID12("Multi-Tech", "MT1432LT", 0x5f73be51, 0x0b3e2383),