2 files changed, 7 insertions, 6 deletions

diff --git a/drivers/serial/8250_gsc.c b/drivers/serial/8250_gsc.c
index 1ebe6b585d2d..c5d0addfda4f 100644
--- a/drivers/serial/8250_gsc.c
+++ b/drivers/serial/8250_gsc.c
@@ -22,7 +22,6 @@
 #include <asm/hardware.h>
 #include <asm/parisc-device.h>
 #include <asm/io.h>
-#include <asm/serial.h> /* for LASI_BASE_BAUD */
 
 #include "8250.h"
 
@@ -54,7 +53,8 @@ serial_init_chip(struct parisc_device *dev)
 
         memset(&port, 0, sizeof(port));
         port.iotype     = UPIO_MEM;
-        port.uartclk    = LASI_BASE_BAUD * 16;
+        /* 7.272727MHz on Lasi.  Assumed the same for Dino, Wax and Timi. */
+        port.uartclk    = 7272727;
         port.mapbase    = address;
         port.membase    = ioremap_nocache(address, 16);
         port.irq        = dev->irq;
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 653098bc2dd5..8edee745888a 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -556,10 +556,11 @@ config SERIAL_MUX
         default y
         ---help---
           Saying Y here will enable the hardware MUX serial driver for
-          the Nova and K class systems.  The hardware MUX is not 8250/16550 
-          compatible therefore the /dev/ttyB0 device is shared between the 
-          Serial MUX and the PDC software console.  The following steps 
-          need to be completed to use the Serial MUX:
+          the Nova, K class systems and D class with a 'remote control card'.
+          The hardware MUX is not 8250/16550 compatible therefore the
+          /dev/ttyB0 device is shared between the Serial MUX and the PDC
+          software console. The following steps need to be completed to use
+          the Serial MUX:
 
             1. create the device entry (mknod /dev/ttyB0 c 11 0)
             2. Edit the /etc/inittab to start a getty listening on /dev/ttyB0