aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/serial/sunsu.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/serial/sunsu.c')
-rw-r--r--drivers/serial/sunsu.c14
1 files changed, 7 insertions, 7 deletions
diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c
index 9a3665b34d97..bc67442c6b4c 100644
--- a/drivers/serial/sunsu.c
+++ b/drivers/serial/sunsu.c
@@ -669,7 +669,7 @@ static int sunsu_startup(struct uart_port *port)
669 * if it is, then bail out, because there's likely no UART 669 * if it is, then bail out, because there's likely no UART
670 * here. 670 * here.
671 */ 671 */
672 if (!(up->port.flags & ASYNC_BUGGY_UART) && 672 if (!(up->port.flags & UPF_BUGGY_UART) &&
673 (serial_inp(up, UART_LSR) == 0xff)) { 673 (serial_inp(up, UART_LSR) == 0xff)) {
674 printk("ttyS%d: LSR safety check engaged!\n", up->port.line); 674 printk("ttyS%d: LSR safety check engaged!\n", up->port.line);
675 return -ENODEV; 675 return -ENODEV;
@@ -707,7 +707,7 @@ static int sunsu_startup(struct uart_port *port)
707 up->ier = UART_IER_RLSI | UART_IER_RDI; 707 up->ier = UART_IER_RLSI | UART_IER_RDI;
708 serial_outp(up, UART_IER, up->ier); 708 serial_outp(up, UART_IER, up->ier);
709 709
710 if (up->port.flags & ASYNC_FOURPORT) { 710 if (up->port.flags & UPF_FOURPORT) {
711 unsigned int icp; 711 unsigned int icp;
712 /* 712 /*
713 * Enable interrupts on the AST Fourport board 713 * Enable interrupts on the AST Fourport board
@@ -740,7 +740,7 @@ static void sunsu_shutdown(struct uart_port *port)
740 serial_outp(up, UART_IER, 0); 740 serial_outp(up, UART_IER, 0);
741 741
742 spin_lock_irqsave(&up->port.lock, flags); 742 spin_lock_irqsave(&up->port.lock, flags);
743 if (up->port.flags & ASYNC_FOURPORT) { 743 if (up->port.flags & UPF_FOURPORT) {
744 /* reset interrupts on the AST Fourport board */ 744 /* reset interrupts on the AST Fourport board */
745 inb((up->port.iobase & 0xfe0) | 0x1f); 745 inb((up->port.iobase & 0xfe0) | 0x1f);
746 up->port.mctrl |= TIOCM_OUT1; 746 up->port.mctrl |= TIOCM_OUT1;
@@ -1132,7 +1132,7 @@ ebus_done:
1132 1132
1133 spin_lock_irqsave(&up->port.lock, flags); 1133 spin_lock_irqsave(&up->port.lock, flags);
1134 1134
1135 if (!(up->port.flags & ASYNC_BUGGY_UART)) { 1135 if (!(up->port.flags & UPF_BUGGY_UART)) {
1136 /* 1136 /*
1137 * Do a simple existence test first; if we fail this, there's 1137 * Do a simple existence test first; if we fail this, there's
1138 * no point trying anything else. 1138 * no point trying anything else.
@@ -1170,7 +1170,7 @@ ebus_done:
1170 * manufacturer would be stupid enough to design a board 1170 * manufacturer would be stupid enough to design a board
1171 * that conflicts with COM 1-4 --- we hope! 1171 * that conflicts with COM 1-4 --- we hope!
1172 */ 1172 */
1173 if (!(up->port.flags & ASYNC_SKIP_TEST)) { 1173 if (!(up->port.flags & UPF_SKIP_TEST)) {
1174 serial_outp(up, UART_MCR, UART_MCR_LOOP | 0x0A); 1174 serial_outp(up, UART_MCR, UART_MCR_LOOP | 0x0A);
1175 status1 = serial_inp(up, UART_MSR) & 0xF0; 1175 status1 = serial_inp(up, UART_MSR) & 0xF0;
1176 serial_outp(up, UART_MCR, save_mcr); 1176 serial_outp(up, UART_MCR, save_mcr);
@@ -1371,7 +1371,7 @@ static __inline__ void wait_for_xmitr(struct uart_sunsu_port *up)
1371 } while ((status & BOTH_EMPTY) != BOTH_EMPTY); 1371 } while ((status & BOTH_EMPTY) != BOTH_EMPTY);
1372 1372
1373 /* Wait up to 1s for flow control if necessary */ 1373 /* Wait up to 1s for flow control if necessary */
1374 if (up->port.flags & ASYNC_CONS_FLOW) { 1374 if (up->port.flags & UPF_CONS_FLOW) {
1375 tmout = 1000000; 1375 tmout = 1000000;
1376 while (--tmout && 1376 while (--tmout &&
1377 ((serial_in(up, UART_MSR) & UART_MSR_CTS) == 0)) 1377 ((serial_in(up, UART_MSR) & UART_MSR_CTS) == 0))
@@ -1513,7 +1513,7 @@ static int __init sunsu_serial_init(void)
1513 up->su_type == SU_PORT_KBD) 1513 up->su_type == SU_PORT_KBD)
1514 continue; 1514 continue;
1515 1515
1516 up->port.flags |= ASYNC_BOOT_AUTOCONF; 1516 up->port.flags |= UPF_BOOT_AUTOCONF;
1517 up->port.type = PORT_UNKNOWN; 1517 up->port.type = PORT_UNKNOWN;
1518 up->port.uartclk = (SU_BASE_BAUD * 16); 1518 up->port.uartclk = (SU_BASE_BAUD * 16);
1519 1519