1 files changed, 7 insertions, 7 deletions

diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c
index 9a3665b34d97..bc67442c6b4c 100644
--- a/drivers/serial/sunsu.c
+++ b/drivers/serial/sunsu.c
@@ -669,7 +669,7 @@ static int sunsu_startup(struct uart_port *port)
          * if it is, then bail out, because there's likely no UART
          * here.
          */
-        if (!(up->port.flags & ASYNC_BUGGY_UART) &&
+        if (!(up->port.flags & UPF_BUGGY_UART) &&
             (serial_inp(up, UART_LSR) == 0xff)) {
                 printk("ttyS%d: LSR safety check engaged!\n", up->port.line);
                 return -ENODEV;
@@ -707,7 +707,7 @@ static int sunsu_startup(struct uart_port *port)
         up->ier = UART_IER_RLSI | UART_IER_RDI;
         serial_outp(up, UART_IER, up->ier);
 
-        if (up->port.flags & ASYNC_FOURPORT) {
+        if (up->port.flags & UPF_FOURPORT) {
                 unsigned int icp;
                 /*
                  * Enable interrupts on the AST Fourport board
@@ -740,7 +740,7 @@ static void sunsu_shutdown(struct uart_port *port)
         serial_outp(up, UART_IER, 0);
 
         spin_lock_irqsave(&up->port.lock, flags);
-        if (up->port.flags & ASYNC_FOURPORT) {
+        if (up->port.flags & UPF_FOURPORT) {
                 /* reset interrupts on the AST Fourport board */
                 inb((up->port.iobase & 0xfe0) | 0x1f);
                 up->port.mctrl |= TIOCM_OUT1;
@@ -1132,7 +1132,7 @@ ebus_done:
 
         spin_lock_irqsave(&up->port.lock, flags);
 
-        if (!(up->port.flags & ASYNC_BUGGY_UART)) {
+        if (!(up->port.flags & UPF_BUGGY_UART)) {
                 /*
                  * Do a simple existence test first; if we fail this, there's
                  * no point trying anything else.
@@ -1170,7 +1170,7 @@ ebus_done:
          * manufacturer would be stupid enough to design a board
          * that conflicts with COM 1-4 --- we hope!
          */
-        if (!(up->port.flags & ASYNC_SKIP_TEST)) {
+        if (!(up->port.flags & UPF_SKIP_TEST)) {
                 serial_outp(up, UART_MCR, UART_MCR_LOOP | 0x0A);
                 status1 = serial_inp(up, UART_MSR) & 0xF0;
                 serial_outp(up, UART_MCR, save_mcr);
@@ -1371,7 +1371,7 @@ static __inline__ void wait_for_xmitr(struct uart_sunsu_port *up)
         } while ((status & BOTH_EMPTY) != BOTH_EMPTY);
 
         /* Wait up to 1s for flow control if necessary */
-        if (up->port.flags & ASYNC_CONS_FLOW) {
+        if (up->port.flags & UPF_CONS_FLOW) {
                 tmout = 1000000;
                 while (--tmout &&
                        ((serial_in(up, UART_MSR) & UART_MSR_CTS) == 0))
@@ -1513,7 +1513,7 @@ static int __init sunsu_serial_init(void)
                     up->su_type == SU_PORT_KBD)
                         continue;
 
-                up->port.flags |= ASYNC_BOOT_AUTOCONF;
+                up->port.flags |= UPF_BOOT_AUTOCONF;
                 up->port.type = PORT_UNKNOWN;
                 up->port.uartclk = (SU_BASE_BAUD * 16);