diff options
Diffstat (limited to 'drivers/serial/sh-sci.c')
| -rw-r--r-- | drivers/serial/sh-sci.c | 1146 |
1 files changed, 421 insertions, 725 deletions
diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c index cbede06cac27..f336ba6778dd 100644 --- a/drivers/serial/sh-sci.c +++ b/drivers/serial/sh-sci.c | |||
| @@ -3,7 +3,7 @@ | |||
| 3 | * | 3 | * |
| 4 | * SuperH on-chip serial module support. (SCI with no FIFO / with FIFO) | 4 | * SuperH on-chip serial module support. (SCI with no FIFO / with FIFO) |
| 5 | * | 5 | * |
| 6 | * Copyright (C) 2002, 2003, 2004 Paul Mundt | 6 | * Copyright (C) 2002 - 2006 Paul Mundt |
| 7 | * | 7 | * |
| 8 | * based off of the old drivers/char/sh-sci.c by: | 8 | * based off of the old drivers/char/sh-sci.c by: |
| 9 | * | 9 | * |
| @@ -20,10 +20,9 @@ | |||
| 20 | 20 | ||
| 21 | #undef DEBUG | 21 | #undef DEBUG |
| 22 | 22 | ||
| 23 | #include <linux/config.h> | ||
| 23 | #include <linux/module.h> | 24 | #include <linux/module.h> |
| 24 | #include <linux/errno.h> | 25 | #include <linux/errno.h> |
| 25 | #include <linux/signal.h> | ||
| 26 | #include <linux/sched.h> | ||
| 27 | #include <linux/timer.h> | 26 | #include <linux/timer.h> |
| 28 | #include <linux/interrupt.h> | 27 | #include <linux/interrupt.h> |
| 29 | #include <linux/tty.h> | 28 | #include <linux/tty.h> |
| @@ -32,71 +31,77 @@ | |||
| 32 | #include <linux/major.h> | 31 | #include <linux/major.h> |
| 33 | #include <linux/string.h> | 32 | #include <linux/string.h> |
| 34 | #include <linux/sysrq.h> | 33 | #include <linux/sysrq.h> |
| 35 | #include <linux/fcntl.h> | ||
| 36 | #include <linux/ptrace.h> | ||
| 37 | #include <linux/ioport.h> | 34 | #include <linux/ioport.h> |
| 38 | #include <linux/mm.h> | 35 | #include <linux/mm.h> |
| 39 | #include <linux/slab.h> | ||
| 40 | #include <linux/init.h> | 36 | #include <linux/init.h> |
| 41 | #include <linux/delay.h> | 37 | #include <linux/delay.h> |
| 42 | #include <linux/console.h> | 38 | #include <linux/console.h> |
| 43 | #include <linux/bitops.h> | 39 | #include <linux/platform_device.h> |
| 44 | #include <linux/generic_serial.h> | ||
| 45 | 40 | ||
| 46 | #ifdef CONFIG_CPU_FREQ | 41 | #ifdef CONFIG_CPU_FREQ |
| 47 | #include <linux/notifier.h> | 42 | #include <linux/notifier.h> |
| 48 | #include <linux/cpufreq.h> | 43 | #include <linux/cpufreq.h> |
| 49 | #endif | 44 | #endif |
| 50 | 45 | ||
| 51 | #include <asm/system.h> | ||
| 52 | #include <asm/io.h> | ||
| 53 | #include <asm/irq.h> | ||
| 54 | #include <asm/uaccess.h> | ||
| 55 | |||
| 56 | #if defined(CONFIG_SUPERH) && !defined(CONFIG_SUPERH64) | 46 | #if defined(CONFIG_SUPERH) && !defined(CONFIG_SUPERH64) |
| 57 | #include <asm/clock.h> | 47 | #include <asm/clock.h> |
| 58 | #endif | ||
| 59 | |||
| 60 | #ifdef CONFIG_SH_STANDARD_BIOS | ||
| 61 | #include <asm/sh_bios.h> | 48 | #include <asm/sh_bios.h> |
| 49 | #include <asm/kgdb.h> | ||
| 62 | #endif | 50 | #endif |
| 63 | 51 | ||
| 52 | #include <asm/sci.h> | ||
| 53 | |||
| 64 | #if defined(CONFIG_SERIAL_SH_SCI_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) | 54 | #if defined(CONFIG_SERIAL_SH_SCI_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) |
| 65 | #define SUPPORT_SYSRQ | 55 | #define SUPPORT_SYSRQ |
| 66 | #endif | 56 | #endif |
| 67 | 57 | ||
| 68 | #include "sh-sci.h" | 58 | #include "sh-sci.h" |
| 69 | 59 | ||
| 70 | #ifdef CONFIG_SH_KGDB | 60 | struct sci_port { |
| 71 | #include <asm/kgdb.h> | 61 | struct uart_port port; |
| 62 | |||
| 63 | /* Port type */ | ||
| 64 | unsigned int type; | ||
| 65 | |||
| 66 | /* Port IRQs: ERI, RXI, TXI, BRI (optional) */ | ||
| 67 | unsigned int irqs[SCIx_NR_IRQS]; | ||
| 68 | |||
| 69 | /* Port pin configuration */ | ||
| 70 | void (*init_pins)(struct uart_port *port, | ||
| 71 | unsigned int cflag); | ||
| 72 | 72 | ||
| 73 | static int kgdb_get_char(struct sci_port *port); | 73 | /* Port enable callback */ |
| 74 | static void kgdb_put_char(struct sci_port *port, char c); | 74 | void (*enable)(struct uart_port *port); |
| 75 | static void kgdb_handle_error(struct sci_port *port); | 75 | |
| 76 | /* Port disable callback */ | ||
| 77 | void (*disable)(struct uart_port *port); | ||
| 78 | |||
| 79 | /* Break timer */ | ||
| 80 | struct timer_list break_timer; | ||
| 81 | int break_flag; | ||
| 82 | }; | ||
| 83 | |||
| 84 | #ifdef CONFIG_SH_KGDB | ||
| 76 | static struct sci_port *kgdb_sci_port; | 85 | static struct sci_port *kgdb_sci_port; |
| 77 | #endif /* CONFIG_SH_KGDB */ | 86 | #endif |
| 78 | 87 | ||
| 79 | #ifdef CONFIG_SERIAL_SH_SCI_CONSOLE | 88 | #ifdef CONFIG_SERIAL_SH_SCI_CONSOLE |
| 80 | static struct sci_port *serial_console_port = 0; | 89 | static struct sci_port *serial_console_port; |
| 81 | #endif /* CONFIG_SERIAL_SH_SCI_CONSOLE */ | 90 | #endif |
| 82 | 91 | ||
| 83 | /* Function prototypes */ | 92 | /* Function prototypes */ |
| 84 | static void sci_stop_tx(struct uart_port *port); | 93 | static void sci_stop_tx(struct uart_port *port); |
| 85 | static void sci_start_tx(struct uart_port *port); | ||
| 86 | static void sci_start_rx(struct uart_port *port, unsigned int tty_start); | ||
| 87 | static void sci_stop_rx(struct uart_port *port); | ||
| 88 | static int sci_request_irq(struct sci_port *port); | ||
| 89 | static void sci_free_irq(struct sci_port *port); | ||
| 90 | |||
| 91 | static struct sci_port sci_ports[]; | ||
| 92 | static struct uart_driver sci_uart_driver; | ||
| 93 | 94 | ||
| 94 | #define SCI_NPORTS sci_uart_driver.nr | 95 | #define SCI_NPORTS CONFIG_SERIAL_SH_SCI_NR_UARTS |
| 95 | 96 | ||
| 96 | #if defined(CONFIG_SH_STANDARD_BIOS) || defined(CONFIG_SH_KGDB) | 97 | static struct sci_port sci_ports[SCI_NPORTS]; |
| 98 | static struct uart_driver sci_uart_driver; | ||
| 97 | 99 | ||
| 98 | static void handle_error(struct uart_port *port) | 100 | #if defined(CONFIG_SERIAL_SH_SCI_CONSOLE) && \ |
| 99 | { /* Clear error flags */ | 101 | defined(CONFIG_SH_STANDARD_BIOS) || defined(CONFIG_SH_KGDB) |
| 102 | static inline void handle_error(struct uart_port *port) | ||
| 103 | { | ||
| 104 | /* Clear error flags */ | ||
| 100 | sci_out(port, SCxSR, SCxSR_ERROR_CLEAR(port)); | 105 | sci_out(port, SCxSR, SCxSR_ERROR_CLEAR(port)); |
| 101 | } | 106 | } |
| 102 | 107 | ||
| @@ -106,8 +111,8 @@ static int get_char(struct uart_port *port) | |||
| 106 | unsigned short status; | 111 | unsigned short status; |
| 107 | int c; | 112 | int c; |
| 108 | 113 | ||
| 109 | local_irq_save(flags); | 114 | spin_lock_irqsave(&port->lock, flags); |
| 110 | do { | 115 | do { |
| 111 | status = sci_in(port, SCxSR); | 116 | status = sci_in(port, SCxSR); |
| 112 | if (status & SCxSR_ERRORS(port)) { | 117 | if (status & SCxSR_ERRORS(port)) { |
| 113 | handle_error(port); | 118 | handle_error(port); |
| @@ -117,38 +122,19 @@ static int get_char(struct uart_port *port) | |||
| 117 | c = sci_in(port, SCxRDR); | 122 | c = sci_in(port, SCxRDR); |
| 118 | sci_in(port, SCxSR); /* Dummy read */ | 123 | sci_in(port, SCxSR); /* Dummy read */ |
| 119 | sci_out(port, SCxSR, SCxSR_RDxF_CLEAR(port)); | 124 | sci_out(port, SCxSR, SCxSR_RDxF_CLEAR(port)); |
| 120 | local_irq_restore(flags); | 125 | spin_unlock_irqrestore(&port->lock, flags); |
| 121 | 126 | ||
| 122 | return c; | 127 | return c; |
| 123 | } | 128 | } |
| 124 | |||
| 125 | /* Taken from sh-stub.c of GDB 4.18 */ | ||
| 126 | static const char hexchars[] = "0123456789abcdef"; | ||
| 127 | |||
| 128 | static __inline__ char highhex(int x) | ||
| 129 | { | ||
| 130 | return hexchars[(x >> 4) & 0xf]; | ||
| 131 | } | ||
| 132 | |||
| 133 | static __inline__ char lowhex(int x) | ||
| 134 | { | ||
| 135 | return hexchars[x & 0xf]; | ||
| 136 | } | ||
| 137 | |||
| 138 | #endif /* CONFIG_SH_STANDARD_BIOS || CONFIG_SH_KGDB */ | 129 | #endif /* CONFIG_SH_STANDARD_BIOS || CONFIG_SH_KGDB */ |
| 139 | 130 | ||
| 140 | /* | 131 | #if defined(CONFIG_SERIAL_SH_SCI_CONSOLE) || defined(CONFIG_SH_KGDB) |
| 141 | * Send the packet in buffer. The host gets one chance to read it. | ||
| 142 | * This routine does not wait for a positive acknowledge. | ||
| 143 | */ | ||
| 144 | |||
| 145 | #ifdef CONFIG_SERIAL_SH_SCI_CONSOLE | ||
| 146 | static void put_char(struct uart_port *port, char c) | 132 | static void put_char(struct uart_port *port, char c) |
| 147 | { | 133 | { |
| 148 | unsigned long flags; | 134 | unsigned long flags; |
| 149 | unsigned short status; | 135 | unsigned short status; |
| 150 | 136 | ||
| 151 | local_irq_save(flags); | 137 | spin_lock_irqsave(&port->lock, flags); |
| 152 | 138 | ||
| 153 | do { | 139 | do { |
| 154 | status = sci_in(port, SCxSR); | 140 | status = sci_in(port, SCxSR); |
| @@ -158,9 +144,11 @@ static void put_char(struct uart_port *port, char c) | |||
| 158 | sci_in(port, SCxSR); /* Dummy read */ | 144 | sci_in(port, SCxSR); /* Dummy read */ |
| 159 | sci_out(port, SCxSR, SCxSR_TDxE_CLEAR(port)); | 145 | sci_out(port, SCxSR, SCxSR_TDxE_CLEAR(port)); |
| 160 | 146 | ||
| 161 | local_irq_restore(flags); | 147 | spin_unlock_irqrestore(&port->lock, flags); |
| 162 | } | 148 | } |
| 149 | #endif | ||
| 163 | 150 | ||
| 151 | #ifdef CONFIG_SERIAL_SH_SCI_CONSOLE | ||
| 164 | static void put_string(struct sci_port *sci_port, const char *buffer, int count) | 152 | static void put_string(struct sci_port *sci_port, const char *buffer, int count) |
| 165 | { | 153 | { |
| 166 | struct uart_port *port = &sci_port->port; | 154 | struct uart_port *port = &sci_port->port; |
| @@ -213,96 +201,28 @@ static void put_string(struct sci_port *sci_port, const char *buffer, int count) | |||
| 213 | } | 201 | } |
| 214 | #endif /* CONFIG_SERIAL_SH_SCI_CONSOLE */ | 202 | #endif /* CONFIG_SERIAL_SH_SCI_CONSOLE */ |
| 215 | 203 | ||
| 216 | |||
| 217 | #ifdef CONFIG_SH_KGDB | 204 | #ifdef CONFIG_SH_KGDB |
| 218 | |||
| 219 | /* Is the SCI ready, ie is there a char waiting? */ | ||
| 220 | static int kgdb_is_char_ready(struct sci_port *port) | ||
| 221 | { | ||
| 222 | unsigned short status = sci_in(port, SCxSR); | ||
| 223 | |||
| 224 | if (status & (SCxSR_ERRORS(port) | SCxSR_BRK(port))) | ||
| 225 | kgdb_handle_error(port); | ||
| 226 | |||
| 227 | return (status & SCxSR_RDxF(port)); | ||
| 228 | } | ||
| 229 | |||
| 230 | /* Write a char */ | ||
| 231 | static void kgdb_put_char(struct sci_port *port, char c) | ||
| 232 | { | ||
| 233 | unsigned short status; | ||
| 234 | |||
| 235 | do | ||
| 236 | status = sci_in(port, SCxSR); | ||
| 237 | while (!(status & SCxSR_TDxE(port))); | ||
| 238 | |||
| 239 | sci_out(port, SCxTDR, c); | ||
| 240 | sci_in(port, SCxSR); /* Dummy read */ | ||
| 241 | sci_out(port, SCxSR, SCxSR_TDxE_CLEAR(port)); | ||
| 242 | } | ||
| 243 | |||
| 244 | /* Get a char if there is one, else ret -1 */ | ||
| 245 | static int kgdb_get_char(struct sci_port *port) | ||
| 246 | { | ||
| 247 | int c; | ||
| 248 | |||
| 249 | if (kgdb_is_char_ready(port) == 0) | ||
| 250 | c = -1; | ||
| 251 | else { | ||
| 252 | c = sci_in(port, SCxRDR); | ||
| 253 | sci_in(port, SCxSR); /* Dummy read */ | ||
| 254 | sci_out(port, SCxSR, SCxSR_RDxF_CLEAR(port)); | ||
| 255 | } | ||
| 256 | |||
| 257 | return c; | ||
| 258 | } | ||
| 259 | |||
| 260 | /* Called from kgdbstub.c to get a character, i.e. is blocking */ | ||
| 261 | static int kgdb_sci_getchar(void) | 205 | static int kgdb_sci_getchar(void) |
| 262 | { | 206 | { |
| 263 | volatile int c; | 207 | int c; |
| 264 | 208 | ||
| 265 | /* Keep trying to read a character, this could be neater */ | 209 | /* Keep trying to read a character, this could be neater */ |
| 266 | while ((c = kgdb_get_char(kgdb_sci_port)) < 0); | 210 | while ((c = get_char(kgdb_sci_port)) < 0) |
| 211 | cpu_relax(); | ||
| 267 | 212 | ||
| 268 | return c; | 213 | return c; |
| 269 | } | 214 | } |
| 270 | 215 | ||
| 271 | /* Called from kgdbstub.c to put a character, just a wrapper */ | 216 | static inline void kgdb_sci_putchar(int c) |
| 272 | static void kgdb_sci_putchar(int c) | ||
| 273 | { | ||
| 274 | |||
| 275 | kgdb_put_char(kgdb_sci_port, c); | ||
| 276 | } | ||
| 277 | |||
| 278 | /* Clear any errors on the SCI */ | ||
| 279 | static void kgdb_handle_error(struct sci_port *port) | ||
| 280 | { | 217 | { |
| 281 | sci_out(port, SCxSR, SCxSR_ERROR_CLEAR(port)); /* Clear error flags */ | 218 | put_char(kgdb_sci_port, c); |
| 282 | } | 219 | } |
| 283 | |||
| 284 | /* Breakpoint if there's a break sent on the serial port */ | ||
| 285 | static void kgdb_break_interrupt(int irq, void *ptr, struct pt_regs *regs) | ||
| 286 | { | ||
| 287 | struct sci_port *port = ptr; | ||
| 288 | unsigned short status = sci_in(port, SCxSR); | ||
| 289 | |||
| 290 | if (status & SCxSR_BRK(port)) { | ||
| 291 | |||
| 292 | /* Break into the debugger if a break is detected */ | ||
| 293 | BREAKPOINT(); | ||
| 294 | |||
| 295 | /* Clear */ | ||
| 296 | sci_out(port, SCxSR, SCxSR_BREAK_CLEAR(port)); | ||
| 297 | } | ||
| 298 | } | ||
| 299 | |||
| 300 | #endif /* CONFIG_SH_KGDB */ | 220 | #endif /* CONFIG_SH_KGDB */ |
| 301 | 221 | ||
| 302 | #if defined(__H8300S__) | 222 | #if defined(__H8300S__) |
| 303 | enum { sci_disable, sci_enable }; | 223 | enum { sci_disable, sci_enable }; |
| 304 | 224 | ||
| 305 | static void h8300_sci_enable(struct uart_port* port, unsigned int ctrl) | 225 | static void h8300_sci_config(struct uart_port* port, unsigned int ctrl) |
| 306 | { | 226 | { |
| 307 | volatile unsigned char *mstpcrl=(volatile unsigned char *)MSTPCRL; | 227 | volatile unsigned char *mstpcrl=(volatile unsigned char *)MSTPCRL; |
| 308 | int ch = (port->mapbase - SMR0) >> 3; | 228 | int ch = (port->mapbase - SMR0) >> 3; |
| @@ -314,32 +234,66 @@ static void h8300_sci_enable(struct uart_port* port, unsigned int ctrl) | |||
| 314 | *mstpcrl &= ~mask; | 234 | *mstpcrl &= ~mask; |
| 315 | } | 235 | } |
| 316 | } | 236 | } |
| 237 | |||
| 238 | static inline void h8300_sci_enable(struct uart_port *port) | ||
| 239 | { | ||
| 240 | h8300_sci_config(port, sci_enable); | ||
| 241 | } | ||
| 242 | |||
| 243 | static inline void h8300_sci_disable(struct uart_port *port) | ||
| 244 | { | ||
| 245 | h8300_sci_config(port, sci_disable); | ||
| 246 | } | ||
| 317 | #endif | 247 | #endif |
| 318 | 248 | ||
| 319 | #if defined(SCI_ONLY) || defined(SCI_AND_SCIF) | 249 | #if defined(SCI_ONLY) || defined(SCI_AND_SCIF) && \ |
| 320 | #if defined(__H8300H__) || defined(__H8300S__) | 250 | defined(__H8300H__) || defined(__H8300S__) |
| 321 | static void sci_init_pins_sci(struct uart_port* port, unsigned int cflag) | 251 | static void sci_init_pins_sci(struct uart_port* port, unsigned int cflag) |
| 322 | { | 252 | { |
| 323 | int ch = (port->mapbase - SMR0) >> 3; | 253 | int ch = (port->mapbase - SMR0) >> 3; |
| 324 | 254 | ||
| 325 | /* set DDR regs */ | 255 | /* set DDR regs */ |
| 326 | H8300_GPIO_DDR(h8300_sci_pins[ch].port,h8300_sci_pins[ch].rx,H8300_GPIO_INPUT); | 256 | H8300_GPIO_DDR(h8300_sci_pins[ch].port, |
| 327 | H8300_GPIO_DDR(h8300_sci_pins[ch].port,h8300_sci_pins[ch].tx,H8300_GPIO_OUTPUT); | 257 | h8300_sci_pins[ch].rx, |
| 258 | H8300_GPIO_INPUT); | ||
| 259 | H8300_GPIO_DDR(h8300_sci_pins[ch].port, | ||
| 260 | h8300_sci_pins[ch].tx, | ||
| 261 | H8300_GPIO_OUTPUT); | ||
| 262 | |||
| 328 | /* tx mark output*/ | 263 | /* tx mark output*/ |
| 329 | H8300_SCI_DR(ch) |= h8300_sci_pins[ch].tx; | 264 | H8300_SCI_DR(ch) |= h8300_sci_pins[ch].tx; |
| 330 | } | 265 | } |
| 266 | #else | ||
| 267 | #define sci_init_pins_sci NULL | ||
| 268 | #endif | ||
| 269 | |||
| 270 | #if defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709) | ||
| 271 | static void sci_init_pins_irda(struct uart_port *port, unsigned int cflag) | ||
| 272 | { | ||
| 273 | unsigned int fcr_val = 0; | ||
| 274 | |||
| 275 | if (cflag & CRTSCTS) | ||
| 276 | fcr_val |= SCFCR_MCE; | ||
| 277 | |||
| 278 | sci_out(port, SCFCR, fcr_val); | ||
| 279 | } | ||
| 280 | #else | ||
| 281 | #define sci_init_pins_irda NULL | ||
| 331 | #endif | 282 | #endif |
| 283 | |||
| 284 | #ifdef SCI_ONLY | ||
| 285 | #define sci_init_pins_scif NULL | ||
| 332 | #endif | 286 | #endif |
| 333 | 287 | ||
| 334 | #if defined(SCIF_ONLY) || defined(SCI_AND_SCIF) | 288 | #if defined(SCIF_ONLY) || defined(SCI_AND_SCIF) |
| 335 | #if defined(CONFIG_CPU_SUBTYPE_SH7300) | 289 | #if defined(CONFIG_CPU_SUBTYPE_SH7300) || defined(CONFIG_CPU_SUBTYPE_SH7710) |
| 336 | /* SH7300 doesn't use RTS/CTS */ | 290 | /* SH7300 doesn't use RTS/CTS */ |
| 337 | static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag) | 291 | static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag) |
| 338 | { | 292 | { |
| 339 | sci_out(port, SCFCR, 0); | 293 | sci_out(port, SCFCR, 0); |
| 340 | } | 294 | } |
| 341 | #elif defined(CONFIG_CPU_SH3) | 295 | #elif defined(CONFIG_CPU_SH3) |
| 342 | /* For SH7705, SH7707, SH7709, SH7709A, SH7729 */ | 296 | /* For SH7705, SH7706, SH7707, SH7709, SH7709A, SH7729 */ |
| 343 | static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag) | 297 | static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag) |
| 344 | { | 298 | { |
| 345 | unsigned int fcr_val = 0; | 299 | unsigned int fcr_val = 0; |
| @@ -366,20 +320,7 @@ static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag) | |||
| 366 | 320 | ||
| 367 | sci_out(port, SCFCR, fcr_val); | 321 | sci_out(port, SCFCR, fcr_val); |
| 368 | } | 322 | } |
| 369 | |||
| 370 | #if defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709) | ||
| 371 | static void sci_init_pins_irda(struct uart_port *port, unsigned int cflag) | ||
| 372 | { | ||
| 373 | unsigned int fcr_val = 0; | ||
| 374 | |||
| 375 | if (cflag & CRTSCTS) | ||
| 376 | fcr_val |= SCFCR_MCE; | ||
| 377 | |||
| 378 | sci_out(port, SCFCR, fcr_val); | ||
| 379 | } | ||
| 380 | #endif | ||
| 381 | #else | 323 | #else |
| 382 | |||
| 383 | /* For SH7750 */ | 324 | /* For SH7750 */ |
| 384 | static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag) | 325 | static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag) |
| 385 | { | 326 | { |
| @@ -388,7 +329,9 @@ static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag) | |||
| 388 | if (cflag & CRTSCTS) { | 329 | if (cflag & CRTSCTS) { |
| 389 | fcr_val |= SCFCR_MCE; | 330 | fcr_val |= SCFCR_MCE; |
| 390 | } else { | 331 | } else { |
| 391 | #ifdef CONFIG_CPU_SUBTYPE_SH7780 | 332 | #ifdef CONFIG_CPU_SUBTYPE_SH7343 |
| 333 | /* Nothing */ | ||
| 334 | #elif defined(CONFIG_CPU_SUBTYPE_SH7780) | ||
| 392 | ctrl_outw(0x0080, SCSPTR0); /* Set RTS = 1 */ | 335 | ctrl_outw(0x0080, SCSPTR0); /* Set RTS = 1 */ |
| 393 | #else | 336 | #else |
| 394 | ctrl_outw(0x0080, SCSPTR2); /* Set RTS = 1 */ | 337 | ctrl_outw(0x0080, SCSPTR2); /* Set RTS = 1 */ |
| @@ -396,10 +339,41 @@ static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag) | |||
| 396 | } | 339 | } |
| 397 | sci_out(port, SCFCR, fcr_val); | 340 | sci_out(port, SCFCR, fcr_val); |
| 398 | } | 341 | } |
| 342 | #endif | ||
| 343 | |||
| 344 | #if defined(CONFIG_CPU_SUBTYPE_SH7760) || defined(CONFIG_CPU_SUBTYPE_SH7780) | ||
| 345 | static inline int scif_txroom(struct uart_port *port) | ||
| 346 | { | ||
| 347 | return SCIF_TXROOM_MAX - (sci_in(port, SCTFDR) & 0x7f); | ||
| 348 | } | ||
| 349 | |||
| 350 | static inline int scif_rxroom(struct uart_port *port) | ||
| 351 | { | ||
| 352 | return sci_in(port, SCRFDR) & 0x7f; | ||
| 353 | } | ||
| 354 | #else | ||
| 355 | static inline int scif_txroom(struct uart_port *port) | ||
| 356 | { | ||
| 357 | return SCIF_TXROOM_MAX - (sci_in(port, SCFDR) >> 8); | ||
| 358 | } | ||
| 399 | 359 | ||
| 360 | static inline int scif_rxroom(struct uart_port *port) | ||
| 361 | { | ||
| 362 | return sci_in(port, SCFDR) & SCIF_RFDC_MASK; | ||
| 363 | } | ||
| 400 | #endif | 364 | #endif |
| 401 | #endif /* SCIF_ONLY || SCI_AND_SCIF */ | 365 | #endif /* SCIF_ONLY || SCI_AND_SCIF */ |
| 402 | 366 | ||
| 367 | static inline int sci_txroom(struct uart_port *port) | ||
| 368 | { | ||
| 369 | return ((sci_in(port, SCxSR) & SCI_TDRE) != 0); | ||
| 370 | } | ||
| 371 | |||
| 372 | static inline int sci_rxroom(struct uart_port *port) | ||
| 373 | { | ||
| 374 | return ((sci_in(port, SCxSR) & SCxSR_RDxF(port)) != 0); | ||
| 375 | } | ||
| 376 | |||
| 403 | /* ********************************************************************** * | 377 | /* ********************************************************************** * |
| 404 | * the interrupt related routines * | 378 | * the interrupt related routines * |
| 405 | * ********************************************************************** */ | 379 | * ********************************************************************** */ |
| @@ -408,14 +382,12 @@ static void sci_transmit_chars(struct uart_port *port) | |||
| 408 | { | 382 | { |
| 409 | struct circ_buf *xmit = &port->info->xmit; | 383 | struct circ_buf *xmit = &port->info->xmit; |
| 410 | unsigned int stopped = uart_tx_stopped(port); | 384 | unsigned int stopped = uart_tx_stopped(port); |
| 411 | unsigned long flags; | ||
| 412 | unsigned short status; | 385 | unsigned short status; |
| 413 | unsigned short ctrl; | 386 | unsigned short ctrl; |
| 414 | int count, txroom; | 387 | int count; |
| 415 | 388 | ||
| 416 | status = sci_in(port, SCxSR); | 389 | status = sci_in(port, SCxSR); |
| 417 | if (!(status & SCxSR_TDxE(port))) { | 390 | if (!(status & SCxSR_TDxE(port))) { |
| 418 | local_irq_save(flags); | ||
| 419 | ctrl = sci_in(port, SCSCR); | 391 | ctrl = sci_in(port, SCSCR); |
| 420 | if (uart_circ_empty(xmit)) { | 392 | if (uart_circ_empty(xmit)) { |
| 421 | ctrl &= ~SCI_CTRL_FLAGS_TIE; | 393 | ctrl &= ~SCI_CTRL_FLAGS_TIE; |
| @@ -423,25 +395,15 @@ static void sci_transmit_chars(struct uart_port *port) | |||
| 423 | ctrl |= SCI_CTRL_FLAGS_TIE; | 395 | ctrl |= SCI_CTRL_FLAGS_TIE; |
| 424 | } | 396 | } |
| 425 | sci_out(port, SCSCR, ctrl); | 397 | sci_out(port, SCSCR, ctrl); |
| 426 | local_irq_restore(flags); | ||
| 427 | return; | 398 | return; |
| 428 | } | 399 | } |
| 429 | 400 | ||
| 430 | #if !defined(SCI_ONLY) | 401 | #ifndef SCI_ONLY |
| 431 | if (port->type == PORT_SCIF) { | 402 | if (port->type == PORT_SCIF) |
| 432 | #if defined(CONFIG_CPU_SUBTYPE_SH7760) || defined(CONFIG_CPU_SUBTYPE_SH7780) | 403 | count = scif_txroom(port); |
| 433 | txroom = SCIF_TXROOM_MAX - (sci_in(port, SCTFDR) & 0x7f); | 404 | else |
| 434 | #else | ||
| 435 | txroom = SCIF_TXROOM_MAX - (sci_in(port, SCFDR)>>8); | ||
| 436 | #endif | ||
| 437 | } else { | ||
| 438 | txroom = (sci_in(port, SCxSR) & SCI_TDRE)?1:0; | ||
| 439 | } | ||
| 440 | #else | ||
| 441 | txroom = (sci_in(port, SCxSR) & SCI_TDRE)?1:0; | ||
| 442 | #endif | 405 | #endif |
| 443 | 406 | count = sci_txroom(port); | |
| 444 | count = txroom; | ||
| 445 | 407 | ||
| 446 | do { | 408 | do { |
| 447 | unsigned char c; | 409 | unsigned char c; |
| @@ -468,7 +430,6 @@ static void sci_transmit_chars(struct uart_port *port) | |||
| 468 | if (uart_circ_empty(xmit)) { | 430 | if (uart_circ_empty(xmit)) { |
| 469 | sci_stop_tx(port); | 431 | sci_stop_tx(port); |
| 470 | } else { | 432 | } else { |
| 471 | local_irq_save(flags); | ||
| 472 | ctrl = sci_in(port, SCSCR); | 433 | ctrl = sci_in(port, SCSCR); |
| 473 | 434 | ||
| 474 | #if !defined(SCI_ONLY) | 435 | #if !defined(SCI_ONLY) |
| @@ -480,7 +441,6 @@ static void sci_transmit_chars(struct uart_port *port) | |||
| 480 | 441 | ||
| 481 | ctrl |= SCI_CTRL_FLAGS_TIE; | 442 | ctrl |= SCI_CTRL_FLAGS_TIE; |
| 482 | sci_out(port, SCSCR, ctrl); | 443 | sci_out(port, SCSCR, ctrl); |
| 483 | local_irq_restore(flags); | ||
| 484 | } | 444 | } |
| 485 | } | 445 | } |
| 486 | 446 | ||
| @@ -490,6 +450,7 @@ static void sci_transmit_chars(struct uart_port *port) | |||
| 490 | static inline void sci_receive_chars(struct uart_port *port, | 450 | static inline void sci_receive_chars(struct uart_port *port, |
| 491 | struct pt_regs *regs) | 451 | struct pt_regs *regs) |
| 492 | { | 452 | { |
| 453 | struct sci_port *sci_port = (struct sci_port *)port; | ||
| 493 | struct tty_struct *tty = port->info->tty; | 454 | struct tty_struct *tty = port->info->tty; |
| 494 | int i, count, copied = 0; | 455 | int i, count, copied = 0; |
| 495 | unsigned short status; | 456 | unsigned short status; |
| @@ -501,18 +462,11 @@ static inline void sci_receive_chars(struct uart_port *port, | |||
| 501 | 462 | ||
| 502 | while (1) { | 463 | while (1) { |
| 503 | #if !defined(SCI_ONLY) | 464 | #if !defined(SCI_ONLY) |
| 504 | if (port->type == PORT_SCIF) { | 465 | if (port->type == PORT_SCIF) |
| 505 | #if defined(CONFIG_CPU_SUBTYPE_SH7760) || defined(CONFIG_CPU_SUBTYPE_SH7780) | 466 | count = scif_rxroom(port); |
| 506 | count = sci_in(port, SCRFDR) & 0x7f; | 467 | else |
| 507 | #else | ||
| 508 | count = sci_in(port, SCFDR)&SCIF_RFDC_MASK ; | ||
| 509 | #endif | ||
| 510 | } else { | ||
| 511 | count = (sci_in(port, SCxSR)&SCxSR_RDxF(port))?1:0; | ||
| 512 | } | ||
| 513 | #else | ||
| 514 | count = (sci_in(port, SCxSR)&SCxSR_RDxF(port))?1:0; | ||
| 515 | #endif | 468 | #endif |
| 469 | count = sci_rxroom(port); | ||
| 516 | 470 | ||
| 517 | /* Don't copy more bytes than there is room for in the buffer */ | 471 | /* Don't copy more bytes than there is room for in the buffer */ |
| 518 | count = tty_buffer_request_room(tty, count); | 472 | count = tty_buffer_request_room(tty, count); |
| @@ -523,11 +477,10 @@ static inline void sci_receive_chars(struct uart_port *port, | |||
| 523 | 477 | ||
| 524 | if (port->type == PORT_SCI) { | 478 | if (port->type == PORT_SCI) { |
| 525 | char c = sci_in(port, SCxRDR); | 479 | char c = sci_in(port, SCxRDR); |
| 526 | if(((struct sci_port *)port)->break_flag | 480 | if (uart_handle_sysrq_char(port, c, regs) || sci_port->break_flag) |
| 527 | || uart_handle_sysrq_char(port, c, regs)) { | ||
| 528 | count = 0; | 481 | count = 0; |
| 529 | } else { | 482 | else { |
| 530 | tty_insert_flip_char(tty, c, TTY_NORMAL); | 483 | tty_insert_flip_char(tty, c, TTY_NORMAL); |
| 531 | } | 484 | } |
| 532 | } else { | 485 | } else { |
| 533 | for (i=0; i<count; i++) { | 486 | for (i=0; i<count; i++) { |
| @@ -535,15 +488,17 @@ static inline void sci_receive_chars(struct uart_port *port, | |||
| 535 | status = sci_in(port, SCxSR); | 488 | status = sci_in(port, SCxSR); |
| 536 | #if defined(CONFIG_CPU_SH3) | 489 | #if defined(CONFIG_CPU_SH3) |
| 537 | /* Skip "chars" during break */ | 490 | /* Skip "chars" during break */ |
| 538 | if (((struct sci_port *)port)->break_flag) { | 491 | if (sci_port->break_flag) { |
| 539 | if ((c == 0) && | 492 | if ((c == 0) && |
| 540 | (status & SCxSR_FER(port))) { | 493 | (status & SCxSR_FER(port))) { |
| 541 | count--; i--; | 494 | count--; i--; |
| 542 | continue; | 495 | continue; |
| 543 | } | 496 | } |
| 497 | |||
| 544 | /* Nonzero => end-of-break */ | 498 | /* Nonzero => end-of-break */ |
| 545 | pr_debug("scif: debounce<%02x>\n", c); | 499 | pr_debug("scif: debounce<%02x>\n", c); |
| 546 | ((struct sci_port *)port)->break_flag = 0; | 500 | sci_port->break_flag = 0; |
| 501 | |||
| 547 | if (STEPFN(c)) { | 502 | if (STEPFN(c)) { |
| 548 | count--; i--; | 503 | count--; i--; |
| 549 | continue; | 504 | continue; |
| @@ -600,15 +555,17 @@ static void sci_schedule_break_timer(struct sci_port *port) | |||
| 600 | /* Ensure that two consecutive samples find the break over. */ | 555 | /* Ensure that two consecutive samples find the break over. */ |
| 601 | static void sci_break_timer(unsigned long data) | 556 | static void sci_break_timer(unsigned long data) |
| 602 | { | 557 | { |
| 603 | struct sci_port * port = (struct sci_port *)data; | 558 | struct sci_port *port = (struct sci_port *)data; |
| 604 | if(sci_rxd_in(&port->port) == 0) { | 559 | |
| 560 | if (sci_rxd_in(&port->port) == 0) { | ||
| 605 | port->break_flag = 1; | 561 | port->break_flag = 1; |
| 606 | sci_schedule_break_timer(port); | 562 | sci_schedule_break_timer(port); |
| 607 | } else if(port->break_flag == 1){ | 563 | } else if (port->break_flag == 1) { |
| 608 | /* break is over. */ | 564 | /* break is over. */ |
| 609 | port->break_flag = 2; | 565 | port->break_flag = 2; |
| 610 | sci_schedule_break_timer(port); | 566 | sci_schedule_break_timer(port); |
| 611 | } else port->break_flag = 0; | 567 | } else |
| 568 | port->break_flag = 0; | ||
| 612 | } | 569 | } |
| 613 | 570 | ||
| 614 | static inline int sci_handle_errors(struct uart_port *port) | 571 | static inline int sci_handle_errors(struct uart_port *port) |
| @@ -617,40 +574,41 @@ static inline int sci_handle_errors(struct uart_port *port) | |||
| 617 | unsigned short status = sci_in(port, SCxSR); | 574 | unsigned short status = sci_in(port, SCxSR); |
| 618 | struct tty_struct *tty = port->info->tty; | 575 | struct tty_struct *tty = port->info->tty; |
| 619 | 576 | ||
| 620 | if (status&SCxSR_ORER(port)) { | 577 | if (status & SCxSR_ORER(port)) { |
| 621 | /* overrun error */ | 578 | /* overrun error */ |
| 622 | if(tty_insert_flip_char(tty, 0, TTY_OVERRUN)) | 579 | if (tty_insert_flip_char(tty, 0, TTY_OVERRUN)) |
| 623 | copied++; | 580 | copied++; |
| 624 | pr_debug("sci: overrun error\n"); | 581 | pr_debug("sci: overrun error\n"); |
| 625 | } | 582 | } |
| 626 | 583 | ||
| 627 | if (status&SCxSR_FER(port)) { | 584 | if (status & SCxSR_FER(port)) { |
| 628 | if (sci_rxd_in(port) == 0) { | 585 | if (sci_rxd_in(port) == 0) { |
| 629 | /* Notify of BREAK */ | 586 | /* Notify of BREAK */ |
| 630 | struct sci_port * sci_port = (struct sci_port *)port; | 587 | struct sci_port *sci_port = (struct sci_port *)port; |
| 631 | if(!sci_port->break_flag) { | 588 | |
| 632 | sci_port->break_flag = 1; | 589 | if (!sci_port->break_flag) { |
| 633 | sci_schedule_break_timer((struct sci_port *)port); | 590 | sci_port->break_flag = 1; |
| 591 | sci_schedule_break_timer(sci_port); | ||
| 592 | |||
| 634 | /* Do sysrq handling. */ | 593 | /* Do sysrq handling. */ |
| 635 | if(uart_handle_break(port)) | 594 | if (uart_handle_break(port)) |
| 636 | return 0; | 595 | return 0; |
| 637 | pr_debug("sci: BREAK detected\n"); | 596 | pr_debug("sci: BREAK detected\n"); |
| 638 | if(tty_insert_flip_char(tty, 0, TTY_BREAK)) | 597 | if (tty_insert_flip_char(tty, 0, TTY_BREAK)) |
| 639 | copied++; | 598 | copied++; |
| 640 | } | 599 | } |
| 641 | } | 600 | } else { |
| 642 | else { | ||
| 643 | /* frame error */ | 601 | /* frame error */ |
| 644 | if(tty_insert_flip_char(tty, 0, TTY_FRAME)) | 602 | if (tty_insert_flip_char(tty, 0, TTY_FRAME)) |
| 645 | copied++; | 603 | copied++; |
| 646 | pr_debug("sci: frame error\n"); | 604 | pr_debug("sci: frame error\n"); |
| 647 | } | 605 | } |
| 648 | } | 606 | } |
| 649 | 607 | ||
| 650 | if (status&SCxSR_PER(port)) { | 608 | if (status & SCxSR_PER(port)) { |
| 651 | if(tty_insert_flip_char(tty, 0, TTY_PARITY)) | ||
| 652 | copied++; | ||
| 653 | /* parity error */ | 609 | /* parity error */ |
| 610 | if (tty_insert_flip_char(tty, 0, TTY_PARITY)) | ||
| 611 | copied++; | ||
| 654 | pr_debug("sci: parity error\n"); | 612 | pr_debug("sci: parity error\n"); |
| 655 | } | 613 | } |
| 656 | 614 | ||
| @@ -673,7 +631,7 @@ static inline int sci_handle_breaks(struct uart_port *port) | |||
| 673 | s->break_flag = 1; | 631 | s->break_flag = 1; |
| 674 | #endif | 632 | #endif |
| 675 | /* Notify of BREAK */ | 633 | /* Notify of BREAK */ |
| 676 | if(tty_insert_flip_char(tty, 0, TTY_BREAK)) | 634 | if (tty_insert_flip_char(tty, 0, TTY_BREAK)) |
| 677 | copied++; | 635 | copied++; |
| 678 | pr_debug("sci: BREAK detected\n"); | 636 | pr_debug("sci: BREAK detected\n"); |
| 679 | } | 637 | } |
| @@ -682,7 +640,7 @@ static inline int sci_handle_breaks(struct uart_port *port) | |||
| 682 | /* XXX: Handle SCIF overrun error */ | 640 | /* XXX: Handle SCIF overrun error */ |
| 683 | if (port->type == PORT_SCIF && (sci_in(port, SCLSR) & SCIF_ORER) != 0) { | 641 | if (port->type == PORT_SCIF && (sci_in(port, SCLSR) & SCIF_ORER) != 0) { |
| 684 | sci_out(port, SCLSR, 0); | 642 | sci_out(port, SCLSR, 0); |
| 685 | if(tty_insert_flip_char(tty, 0, TTY_OVERRUN)) { | 643 | if (tty_insert_flip_char(tty, 0, TTY_OVERRUN)) { |
| 686 | copied++; | 644 | copied++; |
| 687 | pr_debug("sci: overrun error\n"); | 645 | pr_debug("sci: overrun error\n"); |
| 688 | } | 646 | } |
| @@ -691,13 +649,12 @@ static inline int sci_handle_breaks(struct uart_port *port) | |||
| 691 | 649 | ||
| 692 | if (copied) | 650 | if (copied) |
| 693 | tty_flip_buffer_push(tty); | 651 | tty_flip_buffer_push(tty); |
| 652 | |||
| 694 | return copied; | 653 | return copied; |
| 695 | } | 654 | } |
| 696 | 655 | ||
| 697 | static irqreturn_t sci_rx_interrupt(int irq, void *ptr, struct pt_regs *regs) | 656 | static irqreturn_t sci_rx_interrupt(int irq, void *port, struct pt_regs *regs) |
| 698 | { | 657 | { |
| 699 | struct uart_port *port = ptr; | ||
| 700 | |||
| 701 | /* I think sci_receive_chars has to be called irrespective | 658 | /* I think sci_receive_chars has to be called irrespective |
| 702 | * of whether the I_IXOFF is set, otherwise, how is the interrupt | 659 | * of whether the I_IXOFF is set, otherwise, how is the interrupt |
| 703 | * to be disabled? | 660 | * to be disabled? |
| @@ -711,7 +668,9 @@ static irqreturn_t sci_tx_interrupt(int irq, void *ptr, struct pt_regs *regs) | |||
| 711 | { | 668 | { |
| 712 | struct uart_port *port = ptr; | 669 | struct uart_port *port = ptr; |
| 713 | 670 | ||
| 671 | spin_lock_irq(&port->lock); | ||
| 714 | sci_transmit_chars(port); | 672 | sci_transmit_chars(port); |
| 673 | spin_unlock_irq(&port->lock); | ||
| 715 | 674 | ||
| 716 | return IRQ_HANDLED; | 675 | return IRQ_HANDLED; |
| 717 | } | 676 | } |
| @@ -755,6 +714,12 @@ static irqreturn_t sci_br_interrupt(int irq, void *ptr, struct pt_regs *regs) | |||
| 755 | 714 | ||
| 756 | /* Handle BREAKs */ | 715 | /* Handle BREAKs */ |
| 757 | sci_handle_breaks(port); | 716 | sci_handle_breaks(port); |
| 717 | |||
| 718 | #ifdef CONFIG_SH_KGDB | ||
| 719 | /* Break into the debugger if a break is detected */ | ||
| 720 | BREAKPOINT(); | ||
| 721 | #endif | ||
| 722 | |||
| 758 | sci_out(port, SCxSR, SCxSR_BREAK_CLEAR(port)); | 723 | sci_out(port, SCxSR, SCxSR_BREAK_CLEAR(port)); |
| 759 | 724 | ||
| 760 | return IRQ_HANDLED; | 725 | return IRQ_HANDLED; |
| @@ -769,16 +734,16 @@ static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr, struct pt_regs *regs) | |||
| 769 | scr_status = sci_in(port,SCSCR); | 734 | scr_status = sci_in(port,SCSCR); |
| 770 | 735 | ||
| 771 | /* Tx Interrupt */ | 736 | /* Tx Interrupt */ |
| 772 | if ((ssr_status&0x0020) && (scr_status&0x0080)) | 737 | if ((ssr_status & 0x0020) && (scr_status & 0x0080)) |
| 773 | sci_tx_interrupt(irq, ptr, regs); | 738 | sci_tx_interrupt(irq, ptr, regs); |
| 774 | /* Rx Interrupt */ | 739 | /* Rx Interrupt */ |
| 775 | if ((ssr_status&0x0002) && (scr_status&0x0040)) | 740 | if ((ssr_status & 0x0002) && (scr_status & 0x0040)) |
| 776 | sci_rx_interrupt(irq, ptr, regs); | 741 | sci_rx_interrupt(irq, ptr, regs); |
| 777 | /* Error Interrupt */ | 742 | /* Error Interrupt */ |
| 778 | if ((ssr_status&0x0080) && (scr_status&0x0400)) | 743 | if ((ssr_status & 0x0080) && (scr_status & 0x0400)) |
| 779 | sci_er_interrupt(irq, ptr, regs); | 744 | sci_er_interrupt(irq, ptr, regs); |
| 780 | /* Break Interrupt */ | 745 | /* Break Interrupt */ |
| 781 | if ((ssr_status&0x0010) && (scr_status&0x0200)) | 746 | if ((ssr_status & 0x0010) && (scr_status & 0x0200)) |
| 782 | sci_br_interrupt(irq, ptr, regs); | 747 | sci_br_interrupt(irq, ptr, regs); |
| 783 | 748 | ||
| 784 | return IRQ_HANDLED; | 749 | return IRQ_HANDLED; |
| @@ -789,7 +754,8 @@ static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr, struct pt_regs *regs) | |||
| 789 | * Here we define a transistion notifier so that we can update all of our | 754 | * Here we define a transistion notifier so that we can update all of our |
| 790 | * ports' baud rate when the peripheral clock changes. | 755 | * ports' baud rate when the peripheral clock changes. |
| 791 | */ | 756 | */ |
| 792 | static int sci_notifier(struct notifier_block *self, unsigned long phase, void *p) | 757 | static int sci_notifier(struct notifier_block *self, |
| 758 | unsigned long phase, void *p) | ||
| 793 | { | 759 | { |
| 794 | struct cpufreq_freqs *freqs = p; | 760 | struct cpufreq_freqs *freqs = p; |
| 795 | int i; | 761 | int i; |
| @@ -816,8 +782,9 @@ static int sci_notifier(struct notifier_block *self, unsigned long phase, void * | |||
| 816 | clk_put(clk); | 782 | clk_put(clk); |
| 817 | } | 783 | } |
| 818 | 784 | ||
| 819 | printk("%s: got a postchange notification for cpu %d (old %d, new %d)\n", | 785 | printk(KERN_INFO "%s: got a postchange notification " |
| 820 | __FUNCTION__, freqs->cpu, freqs->old, freqs->new); | 786 | "for cpu %d (old %d, new %d)\n", |
| 787 | __FUNCTION__, freqs->cpu, freqs->old, freqs->new); | ||
| 821 | } | 788 | } |
| 822 | 789 | ||
| 823 | return NOTIFY_OK; | 790 | return NOTIFY_OK; |
| @@ -841,8 +808,9 @@ static int sci_request_irq(struct sci_port *port) | |||
| 841 | printk(KERN_ERR "sci: Cannot allocate irq.(IRQ=0)\n"); | 808 | printk(KERN_ERR "sci: Cannot allocate irq.(IRQ=0)\n"); |
| 842 | return -ENODEV; | 809 | return -ENODEV; |
| 843 | } | 810 | } |
| 844 | if (request_irq(port->irqs[0], sci_mpxed_interrupt, IRQF_DISABLED, | 811 | |
| 845 | "sci", port)) { | 812 | if (request_irq(port->irqs[0], sci_mpxed_interrupt, |
| 813 | SA_INTERRUPT, "sci", port)) { | ||
| 846 | printk(KERN_ERR "sci: Cannot allocate irq.\n"); | 814 | printk(KERN_ERR "sci: Cannot allocate irq.\n"); |
| 847 | return -ENODEV; | 815 | return -ENODEV; |
| 848 | } | 816 | } |
| @@ -850,8 +818,8 @@ static int sci_request_irq(struct sci_port *port) | |||
| 850 | for (i = 0; i < ARRAY_SIZE(handlers); i++) { | 818 | for (i = 0; i < ARRAY_SIZE(handlers); i++) { |
| 851 | if (!port->irqs[i]) | 819 | if (!port->irqs[i]) |
| 852 | continue; | 820 | continue; |
| 853 | if (request_irq(port->irqs[i], handlers[i], IRQF_DISABLED, | 821 | if (request_irq(port->irqs[i], handlers[i], |
| 854 | desc[i], port)) { | 822 | SA_INTERRUPT, desc[i], port)) { |
| 855 | printk(KERN_ERR "sci: Cannot allocate irq.\n"); | 823 | printk(KERN_ERR "sci: Cannot allocate irq.\n"); |
| 856 | return -ENODEV; | 824 | return -ENODEV; |
| 857 | } | 825 | } |
| @@ -903,50 +871,42 @@ static unsigned int sci_get_mctrl(struct uart_port *port) | |||
| 903 | 871 | ||
| 904 | static void sci_start_tx(struct uart_port *port) | 872 | static void sci_start_tx(struct uart_port *port) |
| 905 | { | 873 | { |
| 906 | struct sci_port *s = &sci_ports[port->line]; | 874 | unsigned short ctrl; |
| 907 | 875 | ||
| 908 | disable_irq(s->irqs[SCIx_TXI_IRQ]); | 876 | /* Set TIE (Transmit Interrupt Enable) bit in SCSCR */ |
| 909 | sci_transmit_chars(port); | 877 | ctrl = sci_in(port, SCSCR); |
| 910 | enable_irq(s->irqs[SCIx_TXI_IRQ]); | 878 | ctrl |= SCI_CTRL_FLAGS_TIE; |
| 879 | sci_out(port, SCSCR, ctrl); | ||
| 911 | } | 880 | } |
| 912 | 881 | ||
| 913 | static void sci_stop_tx(struct uart_port *port) | 882 | static void sci_stop_tx(struct uart_port *port) |
| 914 | { | 883 | { |
| 915 | unsigned long flags; | ||
| 916 | unsigned short ctrl; | 884 | unsigned short ctrl; |
| 917 | 885 | ||
| 918 | /* Clear TIE (Transmit Interrupt Enable) bit in SCSCR */ | 886 | /* Clear TIE (Transmit Interrupt Enable) bit in SCSCR */ |
| 919 | local_irq_save(flags); | ||
| 920 | ctrl = sci_in(port, SCSCR); | 887 | ctrl = sci_in(port, SCSCR); |
| 921 | ctrl &= ~SCI_CTRL_FLAGS_TIE; | 888 | ctrl &= ~SCI_CTRL_FLAGS_TIE; |
| 922 | sci_out(port, SCSCR, ctrl); | 889 | sci_out(port, SCSCR, ctrl); |
| 923 | local_irq_restore(flags); | ||
| 924 | } | 890 | } |
| 925 | 891 | ||
| 926 | static void sci_start_rx(struct uart_port *port, unsigned int tty_start) | 892 | static void sci_start_rx(struct uart_port *port, unsigned int tty_start) |
| 927 | { | 893 | { |
| 928 | unsigned long flags; | ||
| 929 | unsigned short ctrl; | 894 | unsigned short ctrl; |
| 930 | 895 | ||
| 931 | /* Set RIE (Receive Interrupt Enable) bit in SCSCR */ | 896 | /* Set RIE (Receive Interrupt Enable) bit in SCSCR */ |
| 932 | local_irq_save(flags); | ||
| 933 | ctrl = sci_in(port, SCSCR); | 897 | ctrl = sci_in(port, SCSCR); |
| 934 | ctrl |= SCI_CTRL_FLAGS_RIE | SCI_CTRL_FLAGS_REIE; | 898 | ctrl |= SCI_CTRL_FLAGS_RIE | SCI_CTRL_FLAGS_REIE; |
| 935 | sci_out(port, SCSCR, ctrl); | 899 | sci_out(port, SCSCR, ctrl); |
| 936 | local_irq_restore(flags); | ||
| 937 | } | 900 | } |
| 938 | 901 | ||
| 939 | static void sci_stop_rx(struct uart_port *port) | 902 | static void sci_stop_rx(struct uart_port *port) |
| 940 | { | 903 | { |
| 941 | unsigned long flags; | ||
| 942 | unsigned short ctrl; | 904 | unsigned short ctrl; |
| 943 | 905 | ||
| 944 | /* Clear RIE (Receive Interrupt Enable) bit in SCSCR */ | 906 | /* Clear RIE (Receive Interrupt Enable) bit in SCSCR */ |
| 945 | local_irq_save(flags); | ||
| 946 | ctrl = sci_in(port, SCSCR); | 907 | ctrl = sci_in(port, SCSCR); |
| 947 | ctrl &= ~(SCI_CTRL_FLAGS_RIE | SCI_CTRL_FLAGS_REIE); | 908 | ctrl &= ~(SCI_CTRL_FLAGS_RIE | SCI_CTRL_FLAGS_REIE); |
| 948 | sci_out(port, SCSCR, ctrl); | 909 | sci_out(port, SCSCR, ctrl); |
| 949 | local_irq_restore(flags); | ||
| 950 | } | 910 | } |
| 951 | 911 | ||
| 952 | static void sci_enable_ms(struct uart_port *port) | 912 | static void sci_enable_ms(struct uart_port *port) |
| @@ -963,9 +923,8 @@ static int sci_startup(struct uart_port *port) | |||
| 963 | { | 923 | { |
| 964 | struct sci_port *s = &sci_ports[port->line]; | 924 | struct sci_port *s = &sci_ports[port->line]; |
| 965 | 925 | ||
| 966 | #if defined(__H8300S__) | 926 | if (s->enable) |
| 967 | h8300_sci_enable(port, sci_enable); | 927 | s->enable(port); |
| 968 | #endif | ||
| 969 | 928 | ||
| 970 | sci_request_irq(s); | 929 | sci_request_irq(s); |
| 971 | sci_start_tx(port); | 930 | sci_start_tx(port); |
| @@ -982,9 +941,8 @@ static void sci_shutdown(struct uart_port *port) | |||
| 982 | sci_stop_tx(port); | 941 | sci_stop_tx(port); |
| 983 | sci_free_irq(s); | 942 | sci_free_irq(s); |
| 984 | 943 | ||
| 985 | #if defined(__H8300S__) | 944 | if (s->disable) |
| 986 | h8300_sci_enable(port, sci_disable); | 945 | s->disable(port); |
| 987 | #endif | ||
| 988 | } | 946 | } |
| 989 | 947 | ||
| 990 | static void sci_set_termios(struct uart_port *port, struct termios *termios, | 948 | static void sci_set_termios(struct uart_port *port, struct termios *termios, |
| @@ -997,6 +955,23 @@ static void sci_set_termios(struct uart_port *port, struct termios *termios, | |||
| 997 | 955 | ||
| 998 | baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); | 956 | baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); |
| 999 | 957 | ||
| 958 | switch (baud) { | ||
| 959 | case 0: | ||
| 960 | t = -1; | ||
| 961 | break; | ||
| 962 | default: | ||
| 963 | { | ||
| 964 | #if defined(CONFIG_SUPERH) && !defined(CONFIG_SUPERH64) | ||
| 965 | struct clk *clk = clk_get("module_clk"); | ||
| 966 | t = SCBRR_VALUE(baud, clk_get_rate(clk)); | ||
| 967 | clk_put(clk); | ||
| 968 | #else | ||
| 969 | t = SCBRR_VALUE(baud); | ||
| 970 | #endif | ||
| 971 | } | ||
| 972 | break; | ||
| 973 | } | ||
| 974 | |||
| 1000 | spin_lock_irqsave(&port->lock, flags); | 975 | spin_lock_irqsave(&port->lock, flags); |
| 1001 | 976 | ||
| 1002 | do { | 977 | do { |
| @@ -1006,9 +981,8 @@ static void sci_set_termios(struct uart_port *port, struct termios *termios, | |||
| 1006 | sci_out(port, SCSCR, 0x00); /* TE=0, RE=0, CKE1=0 */ | 981 | sci_out(port, SCSCR, 0x00); /* TE=0, RE=0, CKE1=0 */ |
| 1007 | 982 | ||
| 1008 | #if !defined(SCI_ONLY) | 983 | #if !defined(SCI_ONLY) |
| 1009 | if (port->type == PORT_SCIF) { | 984 | if (port->type == PORT_SCIF) |
| 1010 | sci_out(port, SCFCR, SCFCR_RFRST | SCFCR_TFRST); | 985 | sci_out(port, SCFCR, SCFCR_RFRST | SCFCR_TFRST); |
| 1011 | } | ||
| 1012 | #endif | 986 | #endif |
| 1013 | 987 | ||
| 1014 | smr_val = sci_in(port, SCSMR) & 3; | 988 | smr_val = sci_in(port, SCSMR) & 3; |
| @@ -1025,23 +999,6 @@ static void sci_set_termios(struct uart_port *port, struct termios *termios, | |||
| 1025 | 999 | ||
| 1026 | sci_out(port, SCSMR, smr_val); | 1000 | sci_out(port, SCSMR, smr_val); |
| 1027 | 1001 | ||
| 1028 | switch (baud) { | ||
| 1029 | case 0: | ||
| 1030 | t = -1; | ||
| 1031 | break; | ||
| 1032 | default: | ||
| 1033 | { | ||
| 1034 | #if defined(CONFIG_SUPERH) && !defined(CONFIG_SUPERH64) | ||
| 1035 | struct clk *clk = clk_get("module_clk"); | ||
| 1036 | t = SCBRR_VALUE(baud, clk_get_rate(clk)); | ||
| 1037 | clk_put(clk); | ||
| 1038 | #else | ||
| 1039 | t = SCBRR_VALUE(baud); | ||
| 1040 | #endif | ||
| 1041 | } | ||
| 1042 | break; | ||
| 1043 | } | ||
| 1044 | |||
| 1045 | if (t > 0) { | 1002 | if (t > 0) { |
| 1046 | if(t >= 256) { | 1003 | if(t >= 256) { |
| 1047 | sci_out(port, SCSMR, (sci_in(port, SCSMR) & ~3) | 1); | 1004 | sci_out(port, SCSMR, (sci_in(port, SCSMR) & ~3) | 1); |
| @@ -1092,11 +1049,23 @@ static void sci_config_port(struct uart_port *port, int flags) | |||
| 1092 | 1049 | ||
| 1093 | port->type = s->type; | 1050 | port->type = s->type; |
| 1094 | 1051 | ||
| 1052 | switch (port->type) { | ||
| 1053 | case PORT_SCI: | ||
| 1054 | s->init_pins = sci_init_pins_sci; | ||
| 1055 | break; | ||
| 1056 | case PORT_SCIF: | ||
| 1057 | s->init_pins = sci_init_pins_scif; | ||
| 1058 | break; | ||
| 1059 | case PORT_IRDA: | ||
| 1060 | s->init_pins = sci_init_pins_irda; | ||
| 1061 | break; | ||
| 1062 | } | ||
| 1063 | |||
| 1095 | #if defined(CONFIG_CPU_SUBTYPE_SH5_101) || defined(CONFIG_CPU_SUBTYPE_SH5_103) | 1064 | #if defined(CONFIG_CPU_SUBTYPE_SH5_101) || defined(CONFIG_CPU_SUBTYPE_SH5_103) |
| 1096 | if (port->mapbase == 0) | 1065 | if (port->mapbase == 0) |
| 1097 | port->mapbase = onchip_remap(SCIF_ADDR_SH5, 1024, "SCIF"); | 1066 | port->mapbase = onchip_remap(SCIF_ADDR_SH5, 1024, "SCIF"); |
| 1098 | 1067 | ||
| 1099 | port->membase = (void *)port->mapbase; | 1068 | port->membase = (void __iomem *)port->mapbase; |
| 1100 | #endif | 1069 | #endif |
| 1101 | } | 1070 | } |
| 1102 | 1071 | ||
| @@ -1132,412 +1101,61 @@ static struct uart_ops sci_uart_ops = { | |||
| 1132 | .verify_port = sci_verify_port, | 1101 | .verify_port = sci_verify_port, |
| 1133 | }; | 1102 | }; |
| 1134 | 1103 | ||
| 1135 | static struct sci_port sci_ports[] = { | 1104 | static void __init sci_init_ports(void) |
| 1136 | #if defined(CONFIG_CPU_SUBTYPE_SH7708) | 1105 | { |
| 1137 | { | 1106 | static int first = 1; |
| 1138 | .port = { | 1107 | int i; |
| 1139 | .membase = (void *)0xfffffe80, | 1108 | |
| 1140 | .mapbase = 0xfffffe80, | 1109 | if (!first) |
| 1141 | .iotype = UPIO_MEM, | 1110 | return; |
| 1142 | .irq = 25, | 1111 | |
| 1143 | .ops = &sci_uart_ops, | 1112 | first = 0; |
| 1144 | .flags = UPF_BOOT_AUTOCONF, | 1113 | |
| 1145 | .line = 0, | 1114 | for (i = 0; i < SCI_NPORTS; i++) { |
| 1146 | }, | 1115 | sci_ports[i].port.ops = &sci_uart_ops; |
| 1147 | .type = PORT_SCI, | 1116 | sci_ports[i].port.iotype = UPIO_MEM; |
| 1148 | .irqs = SCI_IRQS, | 1117 | sci_ports[i].port.line = i; |
| 1149 | }, | 1118 | sci_ports[i].port.fifosize = 1; |
| 1150 | #elif defined(CONFIG_CPU_SUBTYPE_SH7705) | 1119 | |
| 1151 | { | 1120 | #if defined(__H8300H__) || defined(__H8300S__) |
| 1152 | .port = { | 1121 | #ifdef __H8300S__ |
| 1153 | .membase = (void *)SCIF0, | 1122 | sci_ports[i].enable = h8300_sci_enable; |
| 1154 | .mapbase = SCIF0, | 1123 | sci_ports[i].disable = h8300_sci_disable; |
| 1155 | .iotype = UPIO_MEM, | 1124 | #endif |
| 1156 | .irq = 55, | 1125 | sci_ports[i].port.uartclk = CONFIG_CPU_CLOCK; |
| 1157 | .ops = &sci_uart_ops, | 1126 | #elif defined(CONFIG_SUPERH64) |
| 1158 | .flags = UPF_BOOT_AUTOCONF, | 1127 | sci_ports[i].port.uartclk = current_cpu_data.module_clock * 16; |
| 1159 | .line = 0, | ||
| 1160 | }, | ||
| 1161 | .type = PORT_SCIF, | ||
| 1162 | .irqs = SH3_IRDA_IRQS, | ||
| 1163 | .init_pins = sci_init_pins_scif, | ||
| 1164 | }, | ||
| 1165 | { | ||
| 1166 | .port = { | ||
| 1167 | .membase = (void *)SCIF2, | ||
| 1168 | .mapbase = SCIF2, | ||
| 1169 | .iotype = UPIO_MEM, | ||
| 1170 | .irq = 59, | ||
| 1171 | .ops = &sci_uart_ops, | ||
| 1172 | .flags = UPF_BOOT_AUTOCONF, | ||
| 1173 | .line = 1, | ||
| 1174 | }, | ||
| 1175 | .type = PORT_SCIF, | ||
| 1176 | .irqs = SH3_SCIF_IRQS, | ||
| 1177 | .init_pins = sci_init_pins_scif, | ||
| 1178 | } | ||
| 1179 | #elif defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709) | ||
| 1180 | { | ||
| 1181 | .port = { | ||
| 1182 | .membase = (void *)0xfffffe80, | ||
| 1183 | .mapbase = 0xfffffe80, | ||
| 1184 | .iotype = UPIO_MEM, | ||
| 1185 | .irq = 25, | ||
| 1186 | .ops = &sci_uart_ops, | ||
| 1187 | .flags = UPF_BOOT_AUTOCONF, | ||
| 1188 | .line = 0, | ||
| 1189 | }, | ||
| 1190 | .type = PORT_SCI, | ||
| 1191 | .irqs = SCI_IRQS, | ||
| 1192 | }, | ||
| 1193 | { | ||
| 1194 | .port = { | ||
| 1195 | .membase = (void *)0xa4000150, | ||
| 1196 | .mapbase = 0xa4000150, | ||
| 1197 | .iotype = UPIO_MEM, | ||
| 1198 | .irq = 59, | ||
| 1199 | .ops = &sci_uart_ops, | ||
| 1200 | .flags = UPF_BOOT_AUTOCONF, | ||
| 1201 | .line = 1, | ||
| 1202 | }, | ||
| 1203 | .type = PORT_SCIF, | ||
| 1204 | .irqs = SH3_SCIF_IRQS, | ||
| 1205 | .init_pins = sci_init_pins_scif, | ||
| 1206 | }, | ||
| 1207 | { | ||
| 1208 | .port = { | ||
| 1209 | .membase = (void *)0xa4000140, | ||
| 1210 | .mapbase = 0xa4000140, | ||
| 1211 | .iotype = UPIO_MEM, | ||
| 1212 | .irq = 55, | ||
| 1213 | .ops = &sci_uart_ops, | ||
| 1214 | .flags = UPF_BOOT_AUTOCONF, | ||
| 1215 | .line = 2, | ||
| 1216 | }, | ||
| 1217 | .type = PORT_IRDA, | ||
| 1218 | .irqs = SH3_IRDA_IRQS, | ||
| 1219 | .init_pins = sci_init_pins_irda, | ||
| 1220 | } | ||
| 1221 | #elif defined(CONFIG_CPU_SUBTYPE_SH7300) | ||
| 1222 | { | ||
| 1223 | .port = { | ||
| 1224 | .membase = (void *)0xA4430000, | ||
| 1225 | .mapbase = 0xA4430000, | ||
| 1226 | .iotype = UPIO_MEM, | ||
| 1227 | .irq = 25, | ||
| 1228 | .ops = &sci_uart_ops, | ||
| 1229 | .flags = UPF_BOOT_AUTOCONF, | ||
| 1230 | .line = 0, | ||
| 1231 | }, | ||
| 1232 | .type = PORT_SCIF, | ||
| 1233 | .irqs = SH7300_SCIF0_IRQS, | ||
| 1234 | .init_pins = sci_init_pins_scif, | ||
| 1235 | }, | ||
| 1236 | #elif defined(CONFIG_CPU_SUBTYPE_SH73180) | ||
| 1237 | { | ||
| 1238 | .port = { | ||
| 1239 | .membase = (void *)0xffe00000, | ||
| 1240 | .mapbase = 0xffe00000, | ||
| 1241 | .iotype = UPIO_MEM, | ||
| 1242 | .irq = 25, | ||
| 1243 | .ops = &sci_uart_ops, | ||
| 1244 | .flags = UPF_BOOT_AUTOCONF, | ||
| 1245 | .line = 0, | ||
| 1246 | }, | ||
| 1247 | .type = PORT_SCIF, | ||
| 1248 | .irqs = SH73180_SCIF_IRQS, | ||
| 1249 | .init_pins = sci_init_pins_scif, | ||
| 1250 | }, | ||
| 1251 | #elif defined(CONFIG_CPU_SUBTYPE_SH4_202) | ||
| 1252 | { | ||
| 1253 | .port = { | ||
| 1254 | .membase = (void *)0xffe80000, | ||
| 1255 | .mapbase = 0xffe80000, | ||
| 1256 | .iotype = UPIO_MEM, | ||
| 1257 | .irq = 43, | ||
| 1258 | .ops = &sci_uart_ops, | ||
| 1259 | .flags = UPF_BOOT_AUTOCONF, | ||
| 1260 | .line = 0, | ||
| 1261 | }, | ||
| 1262 | .type = PORT_SCIF, | ||
| 1263 | .irqs = SH4_SCIF_IRQS, | ||
| 1264 | .init_pins = sci_init_pins_scif, | ||
| 1265 | }, | ||
| 1266 | #elif defined(CONFIG_CPU_SUBTYPE_SH7750) || defined(CONFIG_CPU_SUBTYPE_SH7751) | ||
| 1267 | { | ||
| 1268 | .port = { | ||
| 1269 | .membase = (void *)0xffe00000, | ||
| 1270 | .mapbase = 0xffe00000, | ||
| 1271 | .iotype = UPIO_MEM, | ||
| 1272 | .irq = 25, | ||
| 1273 | .ops = &sci_uart_ops, | ||
| 1274 | .flags = UPF_BOOT_AUTOCONF, | ||
| 1275 | .line = 0, | ||
| 1276 | }, | ||
| 1277 | .type = PORT_SCI, | ||
| 1278 | .irqs = SCI_IRQS, | ||
| 1279 | }, | ||
| 1280 | { | ||
| 1281 | .port = { | ||
| 1282 | .membase = (void *)0xffe80000, | ||
| 1283 | .mapbase = 0xffe80000, | ||
| 1284 | .iotype = UPIO_MEM, | ||
| 1285 | .irq = 43, | ||
| 1286 | .ops = &sci_uart_ops, | ||
| 1287 | .flags = UPF_BOOT_AUTOCONF, | ||
| 1288 | .line = 1, | ||
| 1289 | }, | ||
| 1290 | .type = PORT_SCIF, | ||
| 1291 | .irqs = SH4_SCIF_IRQS, | ||
| 1292 | .init_pins = sci_init_pins_scif, | ||
| 1293 | }, | ||
| 1294 | #elif defined(CONFIG_CPU_SUBTYPE_SH7760) | ||
| 1295 | { | ||
| 1296 | .port = { | ||
| 1297 | .membase = (void *)0xfe600000, | ||
| 1298 | .mapbase = 0xfe600000, | ||
| 1299 | .iotype = UPIO_MEM, | ||
| 1300 | .irq = 55, | ||
| 1301 | .ops = &sci_uart_ops, | ||
| 1302 | .flags = UPF_BOOT_AUTOCONF, | ||
| 1303 | .line = 0, | ||
| 1304 | }, | ||
| 1305 | .type = PORT_SCIF, | ||
| 1306 | .irqs = SH7760_SCIF0_IRQS, | ||
| 1307 | .init_pins = sci_init_pins_scif, | ||
| 1308 | }, | ||
| 1309 | { | ||
| 1310 | .port = { | ||
| 1311 | .membase = (void *)0xfe610000, | ||
| 1312 | .mapbase = 0xfe610000, | ||
| 1313 | .iotype = UPIO_MEM, | ||
| 1314 | .irq = 75, | ||
| 1315 | .ops = &sci_uart_ops, | ||
| 1316 | .flags = UPF_BOOT_AUTOCONF, | ||
| 1317 | .line = 1, | ||
| 1318 | }, | ||
| 1319 | .type = PORT_SCIF, | ||
| 1320 | .irqs = SH7760_SCIF1_IRQS, | ||
| 1321 | .init_pins = sci_init_pins_scif, | ||
| 1322 | }, | ||
| 1323 | { | ||
| 1324 | .port = { | ||
| 1325 | .membase = (void *)0xfe620000, | ||
| 1326 | .mapbase = 0xfe620000, | ||
| 1327 | .iotype = UPIO_MEM, | ||
| 1328 | .irq = 79, | ||
| 1329 | .ops = &sci_uart_ops, | ||
| 1330 | .flags = UPF_BOOT_AUTOCONF, | ||
| 1331 | .line = 2, | ||
| 1332 | }, | ||
| 1333 | .type = PORT_SCIF, | ||
| 1334 | .irqs = SH7760_SCIF2_IRQS, | ||
| 1335 | .init_pins = sci_init_pins_scif, | ||
| 1336 | }, | ||
| 1337 | #elif defined(CONFIG_CPU_SUBTYPE_ST40STB1) | ||
| 1338 | { | ||
| 1339 | .port = { | ||
| 1340 | .membase = (void *)0xffe00000, | ||
| 1341 | .mapbase = 0xffe00000, | ||
| 1342 | .iotype = UPIO_MEM, | ||
| 1343 | .irq = 26, | ||
| 1344 | .ops = &sci_uart_ops, | ||
| 1345 | .flags = UPF_BOOT_AUTOCONF, | ||
| 1346 | .line = 0, | ||
| 1347 | }, | ||
| 1348 | .type = PORT_SCIF, | ||
| 1349 | .irqs = STB1_SCIF1_IRQS, | ||
| 1350 | .init_pins = sci_init_pins_scif, | ||
| 1351 | }, | ||
| 1352 | { | ||
| 1353 | .port = { | ||
| 1354 | .membase = (void *)0xffe80000, | ||
| 1355 | .mapbase = 0xffe80000, | ||
| 1356 | .iotype = UPIO_MEM, | ||
| 1357 | .irq = 43, | ||
| 1358 | .ops = &sci_uart_ops, | ||
| 1359 | .flags = UPF_BOOT_AUTOCONF, | ||
| 1360 | .line = 1, | ||
| 1361 | }, | ||
| 1362 | .type = PORT_SCIF, | ||
| 1363 | .irqs = SH4_SCIF_IRQS, | ||
| 1364 | .init_pins = sci_init_pins_scif, | ||
| 1365 | }, | ||
| 1366 | #elif defined(CONFIG_CPU_SUBTYPE_SH5_101) || defined(CONFIG_CPU_SUBTYPE_SH5_103) | ||
| 1367 | { | ||
| 1368 | .port = { | ||
| 1369 | .iotype = UPIO_MEM, | ||
| 1370 | .irq = 42, | ||
| 1371 | .ops = &sci_uart_ops, | ||
| 1372 | .flags = UPF_BOOT_AUTOCONF, | ||
| 1373 | .line = 0, | ||
| 1374 | }, | ||
| 1375 | .type = PORT_SCIF, | ||
| 1376 | .irqs = SH5_SCIF_IRQS, | ||
| 1377 | .init_pins = sci_init_pins_scif, | ||
| 1378 | }, | ||
| 1379 | #elif defined(CONFIG_H83007) || defined(CONFIG_H83068) | ||
| 1380 | { | ||
| 1381 | .port = { | ||
| 1382 | .membase = (void *)0x00ffffb0, | ||
| 1383 | .mapbase = 0x00ffffb0, | ||
| 1384 | .iotype = UPIO_MEM, | ||
| 1385 | .irq = 54, | ||
| 1386 | .ops = &sci_uart_ops, | ||
| 1387 | .flags = UPF_BOOT_AUTOCONF, | ||
| 1388 | .line = 0, | ||
| 1389 | }, | ||
| 1390 | .type = PORT_SCI, | ||
| 1391 | .irqs = H8300H_SCI_IRQS0, | ||
| 1392 | .init_pins = sci_init_pins_sci, | ||
| 1393 | }, | ||
| 1394 | { | ||
| 1395 | .port = { | ||
| 1396 | .membase = (void *)0x00ffffb8, | ||
| 1397 | .mapbase = 0x00ffffb8, | ||
| 1398 | .iotype = UPIO_MEM, | ||
| 1399 | .irq = 58, | ||
| 1400 | .ops = &sci_uart_ops, | ||
| 1401 | .flags = UPF_BOOT_AUTOCONF, | ||
| 1402 | .line = 1, | ||
| 1403 | }, | ||
| 1404 | .type = PORT_SCI, | ||
| 1405 | .irqs = H8300H_SCI_IRQS1, | ||
| 1406 | .init_pins = sci_init_pins_sci, | ||
| 1407 | }, | ||
| 1408 | { | ||
| 1409 | .port = { | ||
| 1410 | .membase = (void *)0x00ffffc0, | ||
| 1411 | .mapbase = 0x00ffffc0, | ||
| 1412 | .iotype = UPIO_MEM, | ||
| 1413 | .irq = 62, | ||
| 1414 | .ops = &sci_uart_ops, | ||
| 1415 | .flags = UPF_BOOT_AUTOCONF, | ||
| 1416 | .line = 2, | ||
| 1417 | }, | ||
| 1418 | .type = PORT_SCI, | ||
| 1419 | .irqs = H8300H_SCI_IRQS2, | ||
| 1420 | .init_pins = sci_init_pins_sci, | ||
| 1421 | }, | ||
| 1422 | #elif defined(CONFIG_H8S2678) | ||
| 1423 | { | ||
| 1424 | .port = { | ||
| 1425 | .membase = (void *)0x00ffff78, | ||
| 1426 | .mapbase = 0x00ffff78, | ||
| 1427 | .iotype = UPIO_MEM, | ||
| 1428 | .irq = 90, | ||
| 1429 | .ops = &sci_uart_ops, | ||
| 1430 | .flags = UPF_BOOT_AUTOCONF, | ||
| 1431 | .line = 0, | ||
| 1432 | }, | ||
| 1433 | .type = PORT_SCI, | ||
| 1434 | .irqs = H8S_SCI_IRQS0, | ||
| 1435 | .init_pins = sci_init_pins_sci, | ||
| 1436 | }, | ||
| 1437 | { | ||
| 1438 | .port = { | ||
| 1439 | .membase = (void *)0x00ffff80, | ||
| 1440 | .mapbase = 0x00ffff80, | ||
| 1441 | .iotype = UPIO_MEM, | ||
| 1442 | .irq = 94, | ||
| 1443 | .ops = &sci_uart_ops, | ||
| 1444 | .flags = UPF_BOOT_AUTOCONF, | ||
| 1445 | .line = 1, | ||
| 1446 | }, | ||
| 1447 | .type = PORT_SCI, | ||
| 1448 | .irqs = H8S_SCI_IRQS1, | ||
| 1449 | .init_pins = sci_init_pins_sci, | ||
| 1450 | }, | ||
| 1451 | { | ||
| 1452 | .port = { | ||
| 1453 | .membase = (void *)0x00ffff88, | ||
| 1454 | .mapbase = 0x00ffff88, | ||
| 1455 | .iotype = UPIO_MEM, | ||
| 1456 | .irq = 98, | ||
| 1457 | .ops = &sci_uart_ops, | ||
| 1458 | .flags = UPF_BOOT_AUTOCONF, | ||
| 1459 | .line = 2, | ||
| 1460 | }, | ||
| 1461 | .type = PORT_SCI, | ||
| 1462 | .irqs = H8S_SCI_IRQS2, | ||
| 1463 | .init_pins = sci_init_pins_sci, | ||
| 1464 | }, | ||
| 1465 | #elif defined(CONFIG_CPU_SUBTYPE_SH7770) | ||
| 1466 | { | ||
| 1467 | .port = { | ||
| 1468 | .membase = (void *)0xff923000, | ||
| 1469 | .mapbase = 0xff923000, | ||
| 1470 | .iotype = UPIO_MEM, | ||
| 1471 | .irq = 61, | ||
| 1472 | .ops = &sci_uart_ops, | ||
| 1473 | .flags = UPF_BOOT_AUTOCONF, | ||
| 1474 | .line = 0, | ||
| 1475 | }, | ||
| 1476 | .type = PORT_SCIF, | ||
| 1477 | .irqs = SH7770_SCIF0_IRQS, | ||
| 1478 | .init_pins = sci_init_pins_scif, | ||
| 1479 | }, | ||
| 1480 | { | ||
| 1481 | .port = { | ||
| 1482 | .membase = (void *)0xff924000, | ||
| 1483 | .mapbase = 0xff924000, | ||
| 1484 | .iotype = UPIO_MEM, | ||
| 1485 | .irq = 62, | ||
| 1486 | .ops = &sci_uart_ops, | ||
| 1487 | .flags = UPF_BOOT_AUTOCONF, | ||
| 1488 | .line = 1, | ||
| 1489 | }, | ||
| 1490 | .type = PORT_SCIF, | ||
| 1491 | .irqs = SH7770_SCIF1_IRQS, | ||
| 1492 | .init_pins = sci_init_pins_scif, | ||
| 1493 | }, | ||
| 1494 | { | ||
| 1495 | .port = { | ||
| 1496 | .membase = (void *)0xff925000, | ||
| 1497 | .mapbase = 0xff925000, | ||
| 1498 | .iotype = UPIO_MEM, | ||
| 1499 | .irq = 63, | ||
| 1500 | .ops = &sci_uart_ops, | ||
| 1501 | .flags = UPF_BOOT_AUTOCONF, | ||
| 1502 | .line = 2, | ||
| 1503 | }, | ||
| 1504 | .type = PORT_SCIF, | ||
| 1505 | .irqs = SH7770_SCIF2_IRQS, | ||
| 1506 | .init_pins = sci_init_pins_scif, | ||
| 1507 | }, | ||
| 1508 | #elif defined(CONFIG_CPU_SUBTYPE_SH7780) | ||
| 1509 | { | ||
| 1510 | .port = { | ||
| 1511 | .membase = (void *)0xffe00000, | ||
| 1512 | .mapbase = 0xffe00000, | ||
| 1513 | .iotype = UPIO_MEM, | ||
| 1514 | .irq = 43, | ||
| 1515 | .ops = &sci_uart_ops, | ||
| 1516 | .flags = UPF_BOOT_AUTOCONF, | ||
| 1517 | .line = 0, | ||
| 1518 | }, | ||
| 1519 | .type = PORT_SCIF, | ||
| 1520 | .irqs = SH7780_SCIF0_IRQS, | ||
| 1521 | .init_pins = sci_init_pins_scif, | ||
| 1522 | }, | ||
| 1523 | { | ||
| 1524 | .port = { | ||
| 1525 | .membase = (void *)0xffe10000, | ||
| 1526 | .mapbase = 0xffe10000, | ||
| 1527 | .iotype = UPIO_MEM, | ||
| 1528 | .irq = 79, | ||
| 1529 | .ops = &sci_uart_ops, | ||
| 1530 | .flags = UPF_BOOT_AUTOCONF, | ||
| 1531 | .line = 1, | ||
| 1532 | }, | ||
| 1533 | .type = PORT_SCIF, | ||
| 1534 | .irqs = SH7780_SCIF1_IRQS, | ||
| 1535 | .init_pins = sci_init_pins_scif, | ||
| 1536 | }, | ||
| 1537 | #else | 1128 | #else |
| 1538 | #error "CPU subtype not defined" | 1129 | /* |
| 1130 | * XXX: We should use a proper SCI/SCIF clock | ||
| 1131 | */ | ||
| 1132 | { | ||
| 1133 | struct clk *clk = clk_get("module_clk"); | ||
| 1134 | sci_ports[i].port.uartclk = clk_get_rate(clk) * 16; | ||
| 1135 | clk_put(clk); | ||
| 1136 | } | ||
| 1539 | #endif | 1137 | #endif |
| 1540 | }; | 1138 | |
| 1139 | sci_ports[i].break_timer.data = (unsigned long)&sci_ports[i]; | ||
| 1140 | sci_ports[i].break_timer.function = sci_break_timer; | ||
| 1141 | |||
| 1142 | init_timer(&sci_ports[i].break_timer); | ||
| 1143 | } | ||
| 1144 | } | ||
| 1145 | |||
| 1146 | int __init early_sci_setup(struct uart_port *port) | ||
| 1147 | { | ||
| 1148 | if (unlikely(port->line > SCI_NPORTS)) | ||
| 1149 | return -ENODEV; | ||
| 1150 | |||
| 1151 | sci_init_ports(); | ||
| 1152 | |||
| 1153 | sci_ports[port->line].port.membase = port->membase; | ||
| 1154 | sci_ports[port->line].port.mapbase = port->mapbase; | ||
| 1155 | sci_ports[port->line].port.type = port->type; | ||
| 1156 | |||
| 1157 | return 0; | ||
| 1158 | } | ||
| 1541 | 1159 | ||
| 1542 | #ifdef CONFIG_SERIAL_SH_SCI_CONSOLE | 1160 | #ifdef CONFIG_SERIAL_SH_SCI_CONSOLE |
| 1543 | /* | 1161 | /* |
| @@ -1559,34 +1177,38 @@ static int __init serial_console_setup(struct console *co, char *options) | |||
| 1559 | int flow = 'n'; | 1177 | int flow = 'n'; |
| 1560 | int ret; | 1178 | int ret; |
| 1561 | 1179 | ||
| 1180 | /* | ||
| 1181 | * Check whether an invalid uart number has been specified, and | ||
| 1182 | * if so, search for the first available port that does have | ||
| 1183 | * console support. | ||
| 1184 | */ | ||
| 1185 | if (co->index >= SCI_NPORTS) | ||
| 1186 | co->index = 0; | ||
| 1187 | |||
| 1562 | serial_console_port = &sci_ports[co->index]; | 1188 | serial_console_port = &sci_ports[co->index]; |
| 1563 | port = &serial_console_port->port; | 1189 | port = &serial_console_port->port; |
| 1564 | port->type = serial_console_port->type; | ||
| 1565 | |||
| 1566 | #ifdef CONFIG_SUPERH64 | ||
| 1567 | /* This is especially needed on sh64 to remap the SCIF */ | ||
| 1568 | sci_config_port(port, 0); | ||
| 1569 | #endif | ||
| 1570 | 1190 | ||
| 1571 | /* | 1191 | /* |
| 1572 | * We need to set the initial uartclk here, since otherwise it will | 1192 | * Also need to check port->type, we don't actually have any |
| 1573 | * only ever be setup at sci_init() time. | 1193 | * UPIO_PORT ports, but uart_report_port() handily misreports |
| 1194 | * it anyways if we don't have a port available by the time this is | ||
| 1195 | * called. | ||
| 1574 | */ | 1196 | */ |
| 1575 | #if defined(__H8300H__) || defined(__H8300S__) | 1197 | if (!port->type) |
| 1576 | port->uartclk = CONFIG_CPU_CLOCK; | 1198 | return -ENODEV; |
| 1199 | if (!port->membase || !port->mapbase) | ||
| 1200 | return -ENODEV; | ||
| 1201 | |||
| 1202 | spin_lock_init(&port->lock); | ||
| 1203 | |||
| 1204 | port->type = serial_console_port->type; | ||
| 1205 | |||
| 1206 | if (port->flags & UPF_IOREMAP) | ||
| 1207 | sci_config_port(port, 0); | ||
| 1208 | |||
| 1209 | if (serial_console_port->enable) | ||
| 1210 | serial_console_port->enable(port); | ||
| 1577 | 1211 | ||
| 1578 | #if defined(__H8300S__) | ||
| 1579 | h8300_sci_enable(port, sci_enable); | ||
| 1580 | #endif | ||
| 1581 | #elif defined(CONFIG_SUPERH64) | ||
| 1582 | port->uartclk = current_cpu_data.module_clock * 16; | ||
| 1583 | #else | ||
| 1584 | { | ||
| 1585 | struct clk *clk = clk_get("module_clk"); | ||
| 1586 | port->uartclk = clk_get_rate(clk) * 16; | ||
| 1587 | clk_put(clk); | ||
| 1588 | } | ||
| 1589 | #endif | ||
| 1590 | if (options) | 1212 | if (options) |
| 1591 | uart_parse_options(options, &baud, &parity, &bits, &flow); | 1213 | uart_parse_options(options, &baud, &parity, &bits, &flow); |
| 1592 | 1214 | ||
| @@ -1604,17 +1226,17 @@ static struct console serial_console = { | |||
| 1604 | .device = uart_console_device, | 1226 | .device = uart_console_device, |
| 1605 | .write = serial_console_write, | 1227 | .write = serial_console_write, |
| 1606 | .setup = serial_console_setup, | 1228 | .setup = serial_console_setup, |
| 1607 | .flags = CON_PRINTBUFFER, | 1229 | .flags = CON_PRINTBUFFER, |
| 1608 | .index = -1, | 1230 | .index = -1, |
| 1609 | .data = &sci_uart_driver, | 1231 | .data = &sci_uart_driver, |
| 1610 | }; | 1232 | }; |
| 1611 | 1233 | ||
| 1612 | static int __init sci_console_init(void) | 1234 | static int __init sci_console_init(void) |
| 1613 | { | 1235 | { |
| 1236 | sci_init_ports(); | ||
| 1614 | register_console(&serial_console); | 1237 | register_console(&serial_console); |
| 1615 | return 0; | 1238 | return 0; |
| 1616 | } | 1239 | } |
| 1617 | |||
| 1618 | console_initcall(sci_console_init); | 1240 | console_initcall(sci_console_init); |
| 1619 | #endif /* CONFIG_SERIAL_SH_SCI_CONSOLE */ | 1241 | #endif /* CONFIG_SERIAL_SH_SCI_CONSOLE */ |
| 1620 | 1242 | ||
| @@ -1649,6 +1271,8 @@ int __init kgdb_console_setup(struct console *co, char *options) | |||
| 1649 | int parity = 'n'; | 1271 | int parity = 'n'; |
| 1650 | int flow = 'n'; | 1272 | int flow = 'n'; |
| 1651 | 1273 | ||
| 1274 | spin_lock_init(&port->lock); | ||
| 1275 | |||
| 1652 | if (co->index != kgdb_portnum) | 1276 | if (co->index != kgdb_portnum) |
| 1653 | co->index = kgdb_portnum; | 1277 | co->index = kgdb_portnum; |
| 1654 | 1278 | ||
| @@ -1677,10 +1301,10 @@ static struct console kgdb_console = { | |||
| 1677 | /* Register the KGDB console so we get messages (d'oh!) */ | 1301 | /* Register the KGDB console so we get messages (d'oh!) */ |
| 1678 | static int __init kgdb_console_init(void) | 1302 | static int __init kgdb_console_init(void) |
| 1679 | { | 1303 | { |
| 1304 | sci_init_ports(); | ||
| 1680 | register_console(&kgdb_console); | 1305 | register_console(&kgdb_console); |
| 1681 | return 0; | 1306 | return 0; |
| 1682 | } | 1307 | } |
| 1683 | |||
| 1684 | console_initcall(kgdb_console_init); | 1308 | console_initcall(kgdb_console_init); |
| 1685 | #endif /* CONFIG_SH_KGDB_CONSOLE */ | 1309 | #endif /* CONFIG_SH_KGDB_CONSOLE */ |
| 1686 | 1310 | ||
| @@ -1701,60 +1325,132 @@ static struct uart_driver sci_uart_driver = { | |||
| 1701 | .dev_name = "ttySC", | 1325 | .dev_name = "ttySC", |
| 1702 | .major = SCI_MAJOR, | 1326 | .major = SCI_MAJOR, |
| 1703 | .minor = SCI_MINOR_START, | 1327 | .minor = SCI_MINOR_START, |
| 1328 | .nr = SCI_NPORTS, | ||
| 1704 | .cons = SCI_CONSOLE, | 1329 | .cons = SCI_CONSOLE, |
| 1705 | }; | 1330 | }; |
| 1706 | 1331 | ||
| 1707 | static int __init sci_init(void) | 1332 | /* |
| 1333 | * Register a set of serial devices attached to a platform device. The | ||
| 1334 | * list is terminated with a zero flags entry, which means we expect | ||
| 1335 | * all entries to have at least UPF_BOOT_AUTOCONF set. Platforms that need | ||
| 1336 | * remapping (such as sh64) should also set UPF_IOREMAP. | ||
| 1337 | */ | ||
| 1338 | static int __devinit sci_probe(struct platform_device *dev) | ||
| 1708 | { | 1339 | { |
| 1709 | int chan, ret; | 1340 | struct plat_sci_port *p = dev->dev.platform_data; |
| 1341 | int i; | ||
| 1710 | 1342 | ||
| 1711 | printk("%s", banner); | 1343 | for (i = 0; p && p->flags != 0 && i < SCI_NPORTS; p++, i++) { |
| 1344 | struct sci_port *sciport = &sci_ports[i]; | ||
| 1712 | 1345 | ||
| 1713 | sci_uart_driver.nr = ARRAY_SIZE(sci_ports); | 1346 | sciport->port.mapbase = p->mapbase; |
| 1714 | 1347 | ||
| 1715 | ret = uart_register_driver(&sci_uart_driver); | 1348 | /* |
| 1716 | if (ret == 0) { | 1349 | * For the simple (and majority of) cases where we don't need |
| 1717 | for (chan = 0; chan < SCI_NPORTS; chan++) { | 1350 | * to do any remapping, just cast the cookie directly. |
| 1718 | struct sci_port *sciport = &sci_ports[chan]; | 1351 | */ |
| 1352 | if (p->mapbase && !p->membase && !(p->flags & UPF_IOREMAP)) | ||
| 1353 | p->membase = (void __iomem *)p->mapbase; | ||
| 1719 | 1354 | ||
| 1720 | #if defined(__H8300H__) || defined(__H8300S__) | 1355 | sciport->port.membase = p->membase; |
| 1721 | sciport->port.uartclk = CONFIG_CPU_CLOCK; | 1356 | |
| 1722 | #elif defined(CONFIG_SUPERH64) | 1357 | sciport->port.irq = p->irqs[SCIx_TXI_IRQ]; |
| 1723 | sciport->port.uartclk = current_cpu_data.module_clock * 16; | 1358 | sciport->port.flags = p->flags; |
| 1724 | #else | 1359 | sciport->port.dev = &dev->dev; |
| 1725 | struct clk *clk = clk_get("module_clk"); | 1360 | |
| 1726 | sciport->port.uartclk = clk_get_rate(clk) * 16; | 1361 | sciport->type = sciport->port.type = p->type; |
| 1727 | clk_put(clk); | 1362 | |
| 1728 | #endif | 1363 | memcpy(&sciport->irqs, &p->irqs, sizeof(p->irqs)); |
| 1729 | uart_add_one_port(&sci_uart_driver, &sciport->port); | 1364 | |
| 1730 | sciport->break_timer.data = (unsigned long)sciport; | 1365 | uart_add_one_port(&sci_uart_driver, &sciport->port); |
| 1731 | sciport->break_timer.function = sci_break_timer; | ||
| 1732 | init_timer(&sciport->break_timer); | ||
| 1733 | } | ||
| 1734 | } | 1366 | } |
| 1735 | 1367 | ||
| 1736 | #ifdef CONFIG_CPU_FREQ | 1368 | #ifdef CONFIG_CPU_FREQ |
| 1737 | cpufreq_register_notifier(&sci_nb, CPUFREQ_TRANSITION_NOTIFIER); | 1369 | cpufreq_register_notifier(&sci_nb, CPUFREQ_TRANSITION_NOTIFIER); |
| 1738 | printk("sci: CPU frequency notifier registered\n"); | 1370 | dev_info(&dev->dev, "sci: CPU frequency notifier registered\n"); |
| 1739 | #endif | 1371 | #endif |
| 1740 | 1372 | ||
| 1741 | #ifdef CONFIG_SH_STANDARD_BIOS | 1373 | #ifdef CONFIG_SH_STANDARD_BIOS |
| 1742 | sh_bios_gdb_detach(); | 1374 | sh_bios_gdb_detach(); |
| 1743 | #endif | 1375 | #endif |
| 1744 | 1376 | ||
| 1745 | return ret; | 1377 | return 0; |
| 1746 | } | 1378 | } |
| 1747 | 1379 | ||
| 1748 | static void __exit sci_exit(void) | 1380 | static int __devexit sci_remove(struct platform_device *dev) |
| 1381 | { | ||
| 1382 | int i; | ||
| 1383 | |||
| 1384 | for (i = 0; i < SCI_NPORTS; i++) | ||
| 1385 | uart_remove_one_port(&sci_uart_driver, &sci_ports[i].port); | ||
| 1386 | |||
| 1387 | return 0; | ||
| 1388 | } | ||
| 1389 | |||
| 1390 | static int sci_suspend(struct platform_device *dev, pm_message_t state) | ||
| 1749 | { | 1391 | { |
| 1750 | int chan; | 1392 | int i; |
| 1393 | |||
| 1394 | for (i = 0; i < SCI_NPORTS; i++) { | ||
| 1395 | struct sci_port *p = &sci_ports[i]; | ||
| 1396 | |||
| 1397 | if (p->type != PORT_UNKNOWN && p->port.dev == &dev->dev) | ||
| 1398 | uart_suspend_port(&sci_uart_driver, &p->port); | ||
| 1399 | } | ||
| 1751 | 1400 | ||
| 1752 | for (chan = 0; chan < SCI_NPORTS; chan++) | 1401 | return 0; |
| 1753 | uart_remove_one_port(&sci_uart_driver, &sci_ports[chan].port); | 1402 | } |
| 1754 | 1403 | ||
| 1404 | static int sci_resume(struct platform_device *dev) | ||
| 1405 | { | ||
| 1406 | int i; | ||
| 1407 | |||
| 1408 | for (i = 0; i < SCI_NPORTS; i++) { | ||
| 1409 | struct sci_port *p = &sci_ports[i]; | ||
| 1410 | |||
| 1411 | if (p->type != PORT_UNKNOWN && p->port.dev == &dev->dev) | ||
| 1412 | uart_resume_port(&sci_uart_driver, &p->port); | ||
| 1413 | } | ||
| 1414 | |||
| 1415 | return 0; | ||
| 1416 | } | ||
| 1417 | |||
| 1418 | static struct platform_driver sci_driver = { | ||
| 1419 | .probe = sci_probe, | ||
| 1420 | .remove = __devexit_p(sci_remove), | ||
| 1421 | .suspend = sci_suspend, | ||
| 1422 | .resume = sci_resume, | ||
| 1423 | .driver = { | ||
| 1424 | .name = "sh-sci", | ||
| 1425 | .owner = THIS_MODULE, | ||
| 1426 | }, | ||
| 1427 | }; | ||
| 1428 | |||
| 1429 | static int __init sci_init(void) | ||
| 1430 | { | ||
| 1431 | int ret; | ||
| 1432 | |||
| 1433 | printk(banner); | ||
| 1434 | |||
| 1435 | sci_init_ports(); | ||
| 1436 | |||
| 1437 | ret = uart_register_driver(&sci_uart_driver); | ||
| 1438 | if (likely(ret == 0)) { | ||
| 1439 | ret = platform_driver_register(&sci_driver); | ||
| 1440 | if (unlikely(ret)) | ||
| 1441 | uart_unregister_driver(&sci_uart_driver); | ||
| 1442 | } | ||
| 1443 | |||
| 1444 | return ret; | ||
| 1445 | } | ||
| 1446 | |||
| 1447 | static void __exit sci_exit(void) | ||
| 1448 | { | ||
| 1449 | platform_driver_unregister(&sci_driver); | ||
| 1755 | uart_unregister_driver(&sci_uart_driver); | 1450 | uart_unregister_driver(&sci_uart_driver); |
| 1756 | } | 1451 | } |
| 1757 | 1452 | ||
| 1758 | module_init(sci_init); | 1453 | module_init(sci_init); |
| 1759 | module_exit(sci_exit); | 1454 | module_exit(sci_exit); |
| 1760 | 1455 | ||
| 1456 | MODULE_LICENSE("GPL"); | ||
