1 files changed, 49 insertions, 41 deletions

diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c
index 3df2aaec829f..3b9d2d83b590 100644
--- a/drivers/serial/sh-sci.c
+++ b/drivers/serial/sh-sci.c
@@ -3,7 +3,7 @@
  *
  * SuperH on-chip serial module support.  (SCI with no FIFO / with FIFO)
  *
- *  Copyright (C) 2002 - 2006  Paul Mundt
+ *  Copyright (C) 2002 - 2008  Paul Mundt
  *  Modified to support SH7720 SCIF. Markus Brunner, Mark Jonas (Jul 2007).
  *
  * based off of the old drivers/char/sh-sci.c by:
@@ -46,6 +46,7 @@
 #include <linux/cpufreq.h>
 #include <linux/clk.h>
 #include <linux/ctype.h>
+#include <linux/err.h>
 
 #ifdef CONFIG_SUPERH
 #include <asm/clock.h>
@@ -78,7 +79,7 @@ struct sci_port {
         struct timer_list       break_timer;
         int                     break_flag;
 
-#ifdef CONFIG_SUPERH
+#ifdef CONFIG_HAVE_CLK
         /* Port clock */
         struct clk              *clk;
 #endif
@@ -831,7 +832,7 @@ static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr)
         return IRQ_HANDLED;
 }
 
-#ifdef CONFIG_CPU_FREQ
+#if defined(CONFIG_CPU_FREQ) && defined(CONFIG_HAVE_CLK)
 /*
  * Here we define a transistion notifier so that we can update all of our
  * ports' baud rate when the peripheral clock changes.
@@ -860,7 +861,7 @@ static int sci_notifier(struct notifier_block *self,
                          * Clean this up later..
                          */
                         clk = clk_get(NULL, "module_clk");
-                        port->uartclk = clk_get_rate(clk) * 16;
+                        port->uartclk = clk_get_rate(clk);
                         clk_put(clk);
                 }
 
@@ -873,7 +874,7 @@ static int sci_notifier(struct notifier_block *self,
 }
 
 static struct notifier_block sci_nb = { &sci_notifier, NULL, 0 };
-#endif /* CONFIG_CPU_FREQ */
+#endif /* CONFIG_CPU_FREQ && CONFIG_HAVE_CLK */
 
 static int sci_request_irq(struct sci_port *port)
 {
@@ -1008,7 +1009,7 @@ static int sci_startup(struct uart_port *port)
         if (s->enable)
                 s->enable(port);
 
-#if defined(CONFIG_SUPERH) && !defined(CONFIG_SUPERH64)
+#ifdef CONFIG_HAVE_CLK
         s->clk = clk_get(NULL, "module_clk");
 #endif
 
@@ -1030,7 +1031,7 @@ static void sci_shutdown(struct uart_port *port)
         if (s->disable)
                 s->disable(port);
 
-#if defined(CONFIG_SUPERH) && !defined(CONFIG_SUPERH64)
+#ifdef CONFIG_HAVE_CLK
         clk_put(s->clk);
         s->clk = NULL;
 #endif
@@ -1041,24 +1042,11 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
 {
         struct sci_port *s = &sci_ports[port->line];
         unsigned int status, baud, smr_val;
-        int t;
+        int t = -1;
 
         baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
-
-        switch (baud) {
-                case 0:
-                        t = -1;
-                        break;
-                default:
-                {
-#if defined(CONFIG_SUPERH) && !defined(CONFIG_SUPERH64)
-                        t = SCBRR_VALUE(baud, clk_get_rate(s->clk));
-#else
-                        t = SCBRR_VALUE(baud);
-#endif
-                        break;
-                }
-        }
+        if (likely(baud))
+                t = SCBRR_VALUE(baud, port->uartclk);
 
         do {
                 status = sci_in(port, SCxSR);
@@ -1113,7 +1101,7 @@ static const char *sci_type(struct uart_port *port)
                 case PORT_IRDA: return "irda";
         }
 
-        return 0;
+        return NULL;
 }
 
 static void sci_release_port(struct uart_port *port)
@@ -1145,12 +1133,16 @@ static void sci_config_port(struct uart_port *port, int flags)
                 break;
         }
 
-#if defined(CONFIG_CPU_SUBTYPE_SH5_101) || defined(CONFIG_CPU_SUBTYPE_SH5_103)
-        if (port->mapbase == 0)
+        if (port->flags & UPF_IOREMAP && !port->membase) {
+#if defined(CONFIG_SUPERH64)
                 port->mapbase = onchip_remap(SCIF_ADDR_SH5, 1024, "SCIF");
-
-        port->membase = (void __iomem *)port->mapbase;
+                port->membase = (void __iomem *)port->mapbase;
+#else
+                port->membase = ioremap_nocache(port->mapbase, 0x40);
 #endif
+
+                printk(KERN_ERR "sci: can't remap port#%d\n", port->line);
+        }
 }
 
 static int sci_verify_port(struct uart_port *port, struct serial_struct *ser)
@@ -1207,17 +1199,17 @@ static void __init sci_init_ports(void)
                 sci_ports[i].disable    = h8300_sci_disable;
 #endif
                 sci_ports[i].port.uartclk = CONFIG_CPU_CLOCK;
-#elif defined(CONFIG_SUPERH64)
-                sci_ports[i].port.uartclk = current_cpu_data.module_clock * 16;
-#else
+#elif defined(CONFIG_HAVE_CLK)
                 /*
                  * XXX: We should use a proper SCI/SCIF clock
                  */
                 {
                         struct clk *clk = clk_get(NULL, "module_clk");
-                        sci_ports[i].port.uartclk = clk_get_rate(clk) * 16;
+                        sci_ports[i].port.uartclk = clk_get_rate(clk);
                         clk_put(clk);
                 }
+#else
+#error "Need a valid uartclk"
 #endif
 
                 sci_ports[i].break_timer.data = (unsigned long)&sci_ports[i];
@@ -1285,7 +1277,7 @@ static int __init serial_console_setup(struct console *co, char *options)
 
         port->type = serial_console_port->type;
 
-#if defined(CONFIG_SUPERH) && !defined(CONFIG_SUPERH64)
+#ifdef CONFIG_HAVE_CLK
         if (!serial_console_port->clk)
                 serial_console_port->clk = clk_get(NULL, "module_clk");
 #endif
@@ -1436,7 +1428,7 @@ static struct uart_driver sci_uart_driver = {
 static int __devinit sci_probe(struct platform_device *dev)
 {
         struct plat_sci_port *p = dev->dev.platform_data;
-        int i;
+        int i, ret = -EINVAL;
 
         for (i = 0; p && p->flags != 0; p++, i++) {
                 struct sci_port *sciport = &sci_ports[i];
@@ -1453,12 +1445,22 @@ static int __devinit sci_probe(struct platform_device *dev)
 
                 sciport->port.mapbase   = p->mapbase;
 
-                /*
-                 * For the simple (and majority of) cases where we don't need
-                 * to do any remapping, just cast the cookie directly.
-                 */
-                if (p->mapbase && !p->membase && !(p->flags & UPF_IOREMAP))
-                        p->membase = (void __iomem *)p->mapbase;
+                if (p->mapbase && !p->membase) {
+                        if (p->flags & UPF_IOREMAP) {
+                                p->membase = ioremap_nocache(p->mapbase, 0x40);
+                                if (IS_ERR(p->membase)) {
+                                        ret = PTR_ERR(p->membase);
+                                        goto err_unreg;
+                                }
+                        } else {
+                                /*
+                                 * For the simple (and majority of) cases
+                                 * where we don't need to do any remapping,
+                                 * just cast the cookie directly.
+                                 */
+                                p->membase = (void __iomem *)p->mapbase;
+                        }
+                }
 
                 sciport->port.membase   = p->membase;
 
@@ -1479,7 +1481,7 @@ static int __devinit sci_probe(struct platform_device *dev)
         kgdb_putchar    = kgdb_sci_putchar;
 #endif
 
-#ifdef CONFIG_CPU_FREQ
+#if defined(CONFIG_CPU_FREQ) && defined(CONFIG_HAVE_CLK)
         cpufreq_register_notifier(&sci_nb, CPUFREQ_TRANSITION_NOTIFIER);
         dev_info(&dev->dev, "CPU frequency notifier registered\n");
 #endif
@@ -1489,6 +1491,12 @@ static int __devinit sci_probe(struct platform_device *dev)
 #endif
 
         return 0;
+
+err_unreg:
+        for (i = i - 1; i >= 0; i--)
+                uart_remove_one_port(&sci_uart_driver, &sci_ports[i].port);
+
+        return ret;
 }
 
 static int __devexit sci_remove(struct platform_device *dev)