aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/serial/omap-serial.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/serial/omap-serial.c')
-rw-r--r--drivers/serial/omap-serial.c1333
1 files changed, 1333 insertions, 0 deletions
diff --git a/drivers/serial/omap-serial.c b/drivers/serial/omap-serial.c
new file mode 100644
index 000000000000..2ee1d3282a8c
--- /dev/null
+++ b/drivers/serial/omap-serial.c
@@ -0,0 +1,1333 @@
1/*
2 * Driver for OMAP-UART controller.
3 * Based on drivers/serial/8250.c
4 *
5 * Copyright (C) 2010 Texas Instruments.
6 *
7 * Authors:
8 * Govindraj R <govindraj.raja@ti.com>
9 * Thara Gopinath <thara@ti.com>
10 *
11 * This program is free software; you can redistribute it and/or modify
12 * it under the terms of the GNU General Public License as published by
13 * the Free Software Foundation; either version 2 of the License, or
14 * (at your option) any later version.
15 *
16 * Note: This driver is made seperate from 8250 driver as we cannot
17 * over load 8250 driver with omap platform specific configuration for
18 * features like DMA, it makes easier to implement features like DMA and
19 * hardware flow control and software flow control configuration with
20 * this driver as required for the omap-platform.
21 */
22
23#include <linux/module.h>
24#include <linux/init.h>
25#include <linux/console.h>
26#include <linux/serial_reg.h>
27#include <linux/delay.h>
28#include <linux/slab.h>
29#include <linux/tty.h>
30#include <linux/tty_flip.h>
31#include <linux/io.h>
32#include <linux/dma-mapping.h>
33#include <linux/clk.h>
34#include <linux/serial_core.h>
35#include <linux/irq.h>
36
37#include <plat/dma.h>
38#include <plat/dmtimer.h>
39#include <plat/omap-serial.h>
40
41static struct uart_omap_port *ui[OMAP_MAX_HSUART_PORTS];
42
43/* Forward declaration of functions */
44static void uart_tx_dma_callback(int lch, u16 ch_status, void *data);
45static void serial_omap_rx_timeout(unsigned long uart_no);
46static int serial_omap_start_rxdma(struct uart_omap_port *up);
47
48static inline unsigned int serial_in(struct uart_omap_port *up, int offset)
49{
50 offset <<= up->port.regshift;
51 return readw(up->port.membase + offset);
52}
53
54static inline void serial_out(struct uart_omap_port *up, int offset, int value)
55{
56 offset <<= up->port.regshift;
57 writew(value, up->port.membase + offset);
58}
59
60static inline void serial_omap_clear_fifos(struct uart_omap_port *up)
61{
62 serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO);
63 serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO |
64 UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
65 serial_out(up, UART_FCR, 0);
66}
67
68/*
69 * serial_omap_get_divisor - calculate divisor value
70 * @port: uart port info
71 * @baud: baudrate for which divisor needs to be calculated.
72 *
73 * We have written our own function to get the divisor so as to support
74 * 13x mode. 3Mbps Baudrate as an different divisor.
75 * Reference OMAP TRM Chapter 17:
76 * Table 17-1. UART Mode Baud Rates, Divisor Values, and Error Rates
77 * referring to oversampling - divisor value
78 * baudrate 460,800 to 3,686,400 all have divisor 13
79 * except 3,000,000 which has divisor value 16
80 */
81static unsigned int
82serial_omap_get_divisor(struct uart_port *port, unsigned int baud)
83{
84 unsigned int divisor;
85
86 if (baud > OMAP_MODE13X_SPEED && baud != 3000000)
87 divisor = 13;
88 else
89 divisor = 16;
90 return port->uartclk/(baud * divisor);
91}
92
93static void serial_omap_stop_rxdma(struct uart_omap_port *up)
94{
95 if (up->uart_dma.rx_dma_used) {
96 del_timer(&up->uart_dma.rx_timer);
97 omap_stop_dma(up->uart_dma.rx_dma_channel);
98 omap_free_dma(up->uart_dma.rx_dma_channel);
99 up->uart_dma.rx_dma_channel = OMAP_UART_DMA_CH_FREE;
100 up->uart_dma.rx_dma_used = false;
101 }
102}
103
104static void serial_omap_enable_ms(struct uart_port *port)
105{
106 struct uart_omap_port *up = (struct uart_omap_port *)port;
107
108 dev_dbg(up->port.dev, "serial_omap_enable_ms+%d\n", up->pdev->id);
109 up->ier |= UART_IER_MSI;
110 serial_out(up, UART_IER, up->ier);
111}
112
113static void serial_omap_stop_tx(struct uart_port *port)
114{
115 struct uart_omap_port *up = (struct uart_omap_port *)port;
116
117 if (up->use_dma &&
118 up->uart_dma.tx_dma_channel != OMAP_UART_DMA_CH_FREE) {
119 /*
120 * Check if dma is still active. If yes do nothing,
121 * return. Else stop dma
122 */
123 if (omap_get_dma_active_status(up->uart_dma.tx_dma_channel))
124 return;
125 omap_stop_dma(up->uart_dma.tx_dma_channel);
126 omap_free_dma(up->uart_dma.tx_dma_channel);
127 up->uart_dma.tx_dma_channel = OMAP_UART_DMA_CH_FREE;
128 }
129
130 if (up->ier & UART_IER_THRI) {
131 up->ier &= ~UART_IER_THRI;
132 serial_out(up, UART_IER, up->ier);
133 }
134}
135
136static void serial_omap_stop_rx(struct uart_port *port)
137{
138 struct uart_omap_port *up = (struct uart_omap_port *)port;
139
140 if (up->use_dma)
141 serial_omap_stop_rxdma(up);
142 up->ier &= ~UART_IER_RLSI;
143 up->port.read_status_mask &= ~UART_LSR_DR;
144 serial_out(up, UART_IER, up->ier);
145}
146
147static inline void receive_chars(struct uart_omap_port *up, int *status)
148{
149 struct tty_struct *tty = up->port.state->port.tty;
150 unsigned int flag;
151 unsigned char ch, lsr = *status;
152 int max_count = 256;
153
154 do {
155 if (likely(lsr & UART_LSR_DR))
156 ch = serial_in(up, UART_RX);
157 flag = TTY_NORMAL;
158 up->port.icount.rx++;
159
160 if (unlikely(lsr & UART_LSR_BRK_ERROR_BITS)) {
161 /*
162 * For statistics only
163 */
164 if (lsr & UART_LSR_BI) {
165 lsr &= ~(UART_LSR_FE | UART_LSR_PE);
166 up->port.icount.brk++;
167 /*
168 * We do the SysRQ and SAK checking
169 * here because otherwise the break
170 * may get masked by ignore_status_mask
171 * or read_status_mask.
172 */
173 if (uart_handle_break(&up->port))
174 goto ignore_char;
175 } else if (lsr & UART_LSR_PE) {
176 up->port.icount.parity++;
177 } else if (lsr & UART_LSR_FE) {
178 up->port.icount.frame++;
179 }
180
181 if (lsr & UART_LSR_OE)
182 up->port.icount.overrun++;
183
184 /*
185 * Mask off conditions which should be ignored.
186 */
187 lsr &= up->port.read_status_mask;
188
189#ifdef CONFIG_SERIAL_OMAP_CONSOLE
190 if (up->port.line == up->port.cons->index) {
191 /* Recover the break flag from console xmit */
192 lsr |= up->lsr_break_flag;
193 up->lsr_break_flag = 0;
194 }
195#endif
196 if (lsr & UART_LSR_BI)
197 flag = TTY_BREAK;
198 else if (lsr & UART_LSR_PE)
199 flag = TTY_PARITY;
200 else if (lsr & UART_LSR_FE)
201 flag = TTY_FRAME;
202 }
203
204 if (uart_handle_sysrq_char(&up->port, ch))
205 goto ignore_char;
206 uart_insert_char(&up->port, lsr, UART_LSR_OE, ch, flag);
207ignore_char:
208 lsr = serial_in(up, UART_LSR);
209 } while ((lsr & (UART_LSR_DR | UART_LSR_BI)) && (max_count-- > 0));
210 spin_unlock(&up->port.lock);
211 tty_flip_buffer_push(tty);
212 spin_lock(&up->port.lock);
213}
214
215static void transmit_chars(struct uart_omap_port *up)
216{
217 struct circ_buf *xmit = &up->port.state->xmit;
218 int count;
219
220 if (up->port.x_char) {
221 serial_out(up, UART_TX, up->port.x_char);
222 up->port.icount.tx++;
223 up->port.x_char = 0;
224 return;
225 }
226 if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) {
227 serial_omap_stop_tx(&up->port);
228 return;
229 }
230 count = up->port.fifosize / 4;
231 do {
232 serial_out(up, UART_TX, xmit->buf[xmit->tail]);
233 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
234 up->port.icount.tx++;
235 if (uart_circ_empty(xmit))
236 break;
237 } while (--count > 0);
238
239 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
240 uart_write_wakeup(&up->port);
241
242 if (uart_circ_empty(xmit))
243 serial_omap_stop_tx(&up->port);
244}
245
246static inline void serial_omap_enable_ier_thri(struct uart_omap_port *up)
247{
248 if (!(up->ier & UART_IER_THRI)) {
249 up->ier |= UART_IER_THRI;
250 serial_out(up, UART_IER, up->ier);
251 }
252}
253
254static void serial_omap_start_tx(struct uart_port *port)
255{
256 struct uart_omap_port *up = (struct uart_omap_port *)port;
257 struct circ_buf *xmit;
258 unsigned int start;
259 int ret = 0;
260
261 if (!up->use_dma) {
262 serial_omap_enable_ier_thri(up);
263 return;
264 }
265
266 if (up->uart_dma.tx_dma_used)
267 return;
268
269 xmit = &up->port.state->xmit;
270
271 if (up->uart_dma.tx_dma_channel == OMAP_UART_DMA_CH_FREE) {
272 ret = omap_request_dma(up->uart_dma.uart_dma_tx,
273 "UART Tx DMA",
274 (void *)uart_tx_dma_callback, up,
275 &(up->uart_dma.tx_dma_channel));
276
277 if (ret < 0) {
278 serial_omap_enable_ier_thri(up);
279 return;
280 }
281 }
282 spin_lock(&(up->uart_dma.tx_lock));
283 up->uart_dma.tx_dma_used = true;
284 spin_unlock(&(up->uart_dma.tx_lock));
285
286 start = up->uart_dma.tx_buf_dma_phys +
287 (xmit->tail & (UART_XMIT_SIZE - 1));
288
289 up->uart_dma.tx_buf_size = uart_circ_chars_pending(xmit);
290 /*
291 * It is a circular buffer. See if the buffer has wounded back.
292 * If yes it will have to be transferred in two separate dma
293 * transfers
294 */
295 if (start + up->uart_dma.tx_buf_size >=
296 up->uart_dma.tx_buf_dma_phys + UART_XMIT_SIZE)
297 up->uart_dma.tx_buf_size =
298 (up->uart_dma.tx_buf_dma_phys +
299 UART_XMIT_SIZE) - start;
300
301 omap_set_dma_dest_params(up->uart_dma.tx_dma_channel, 0,
302 OMAP_DMA_AMODE_CONSTANT,
303 up->uart_dma.uart_base, 0, 0);
304 omap_set_dma_src_params(up->uart_dma.tx_dma_channel, 0,
305 OMAP_DMA_AMODE_POST_INC, start, 0, 0);
306 omap_set_dma_transfer_params(up->uart_dma.tx_dma_channel,
307 OMAP_DMA_DATA_TYPE_S8,
308 up->uart_dma.tx_buf_size, 1,
309 OMAP_DMA_SYNC_ELEMENT,
310 up->uart_dma.uart_dma_tx, 0);
311 /* FIXME: Cache maintenance needed here? */
312 omap_start_dma(up->uart_dma.tx_dma_channel);
313}
314
315static unsigned int check_modem_status(struct uart_omap_port *up)
316{
317 unsigned int status;
318
319 status = serial_in(up, UART_MSR);
320 status |= up->msr_saved_flags;
321 up->msr_saved_flags = 0;
322 if ((status & UART_MSR_ANY_DELTA) == 0)
323 return status;
324
325 if (status & UART_MSR_ANY_DELTA && up->ier & UART_IER_MSI &&
326 up->port.state != NULL) {
327 if (status & UART_MSR_TERI)
328 up->port.icount.rng++;
329 if (status & UART_MSR_DDSR)
330 up->port.icount.dsr++;
331 if (status & UART_MSR_DDCD)
332 uart_handle_dcd_change
333 (&up->port, status & UART_MSR_DCD);
334 if (status & UART_MSR_DCTS)
335 uart_handle_cts_change
336 (&up->port, status & UART_MSR_CTS);
337 wake_up_interruptible(&up->port.state->port.delta_msr_wait);
338 }
339
340 return status;
341}
342
343/**
344 * serial_omap_irq() - This handles the interrupt from one port
345 * @irq: uart port irq number
346 * @dev_id: uart port info
347 */
348static inline irqreturn_t serial_omap_irq(int irq, void *dev_id)
349{
350 struct uart_omap_port *up = dev_id;
351 unsigned int iir, lsr;
352 unsigned long flags;
353
354 iir = serial_in(up, UART_IIR);
355 if (iir & UART_IIR_NO_INT)
356 return IRQ_NONE;
357
358 spin_lock_irqsave(&up->port.lock, flags);
359 lsr = serial_in(up, UART_LSR);
360 if (iir & UART_IIR_RLSI) {
361 if (!up->use_dma) {
362 if (lsr & UART_LSR_DR)
363 receive_chars(up, &lsr);
364 } else {
365 up->ier &= ~(UART_IER_RDI | UART_IER_RLSI);
366 serial_out(up, UART_IER, up->ier);
367 if ((serial_omap_start_rxdma(up) != 0) &&
368 (lsr & UART_LSR_DR))
369 receive_chars(up, &lsr);
370 }
371 }
372
373 check_modem_status(up);
374 if ((lsr & UART_LSR_THRE) && (iir & UART_IIR_THRI))
375 transmit_chars(up);
376
377 spin_unlock_irqrestore(&up->port.lock, flags);
378 up->port_activity = jiffies;
379 return IRQ_HANDLED;
380}
381
382static unsigned int serial_omap_tx_empty(struct uart_port *port)
383{
384 struct uart_omap_port *up = (struct uart_omap_port *)port;
385 unsigned long flags = 0;
386 unsigned int ret = 0;
387
388 dev_dbg(up->port.dev, "serial_omap_tx_empty+%d\n", up->pdev->id);
389 spin_lock_irqsave(&up->port.lock, flags);
390 ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0;
391 spin_unlock_irqrestore(&up->port.lock, flags);
392
393 return ret;
394}
395
396static unsigned int serial_omap_get_mctrl(struct uart_port *port)
397{
398 struct uart_omap_port *up = (struct uart_omap_port *)port;
399 unsigned char status;
400 unsigned int ret = 0;
401
402 status = check_modem_status(up);
403 dev_dbg(up->port.dev, "serial_omap_get_mctrl+%d\n", up->pdev->id);
404
405 if (status & UART_MSR_DCD)
406 ret |= TIOCM_CAR;
407 if (status & UART_MSR_RI)
408 ret |= TIOCM_RNG;
409 if (status & UART_MSR_DSR)
410 ret |= TIOCM_DSR;
411 if (status & UART_MSR_CTS)
412 ret |= TIOCM_CTS;
413 return ret;
414}
415
416static void serial_omap_set_mctrl(struct uart_port *port, unsigned int mctrl)
417{
418 struct uart_omap_port *up = (struct uart_omap_port *)port;
419 unsigned char mcr = 0;
420
421 dev_dbg(up->port.dev, "serial_omap_set_mctrl+%d\n", up->pdev->id);
422 if (mctrl & TIOCM_RTS)
423 mcr |= UART_MCR_RTS;
424 if (mctrl & TIOCM_DTR)
425 mcr |= UART_MCR_DTR;
426 if (mctrl & TIOCM_OUT1)
427 mcr |= UART_MCR_OUT1;
428 if (mctrl & TIOCM_OUT2)
429 mcr |= UART_MCR_OUT2;
430 if (mctrl & TIOCM_LOOP)
431 mcr |= UART_MCR_LOOP;
432
433 mcr |= up->mcr;
434 serial_out(up, UART_MCR, mcr);
435}
436
437static void serial_omap_break_ctl(struct uart_port *port, int break_state)
438{
439 struct uart_omap_port *up = (struct uart_omap_port *)port;
440 unsigned long flags = 0;
441
442 dev_dbg(up->port.dev, "serial_omap_break_ctl+%d\n", up->pdev->id);
443 spin_lock_irqsave(&up->port.lock, flags);
444 if (break_state == -1)
445 up->lcr |= UART_LCR_SBC;
446 else
447 up->lcr &= ~UART_LCR_SBC;
448 serial_out(up, UART_LCR, up->lcr);
449 spin_unlock_irqrestore(&up->port.lock, flags);
450}
451
452static int serial_omap_startup(struct uart_port *port)
453{
454 struct uart_omap_port *up = (struct uart_omap_port *)port;
455 unsigned long flags = 0;
456 int retval;
457
458 /*
459 * Allocate the IRQ
460 */
461 retval = request_irq(up->port.irq, serial_omap_irq, up->port.irqflags,
462 up->name, up);
463 if (retval)
464 return retval;
465
466 dev_dbg(up->port.dev, "serial_omap_startup+%d\n", up->pdev->id);
467
468 /*
469 * Clear the FIFO buffers and disable them.
470 * (they will be reenabled in set_termios())
471 */
472 serial_omap_clear_fifos(up);
473 /* For Hardware flow control */
474 serial_out(up, UART_MCR, UART_MCR_RTS);
475
476 /*
477 * Clear the interrupt registers.
478 */
479 (void) serial_in(up, UART_LSR);
480 if (serial_in(up, UART_LSR) & UART_LSR_DR)
481 (void) serial_in(up, UART_RX);
482 (void) serial_in(up, UART_IIR);
483 (void) serial_in(up, UART_MSR);
484
485 /*
486 * Now, initialize the UART
487 */
488 serial_out(up, UART_LCR, UART_LCR_WLEN8);
489 spin_lock_irqsave(&up->port.lock, flags);
490 /*
491 * Most PC uarts need OUT2 raised to enable interrupts.
492 */
493 up->port.mctrl |= TIOCM_OUT2;
494 serial_omap_set_mctrl(&up->port, up->port.mctrl);
495 spin_unlock_irqrestore(&up->port.lock, flags);
496
497 up->msr_saved_flags = 0;
498 if (up->use_dma) {
499 free_page((unsigned long)up->port.state->xmit.buf);
500 up->port.state->xmit.buf = dma_alloc_coherent(NULL,
501 UART_XMIT_SIZE,
502 (dma_addr_t *)&(up->uart_dma.tx_buf_dma_phys),
503 0);
504 init_timer(&(up->uart_dma.rx_timer));
505 up->uart_dma.rx_timer.function = serial_omap_rx_timeout;
506 up->uart_dma.rx_timer.data = up->pdev->id;
507 /* Currently the buffer size is 4KB. Can increase it */
508 up->uart_dma.rx_buf = dma_alloc_coherent(NULL,
509 up->uart_dma.rx_buf_size,
510 (dma_addr_t *)&(up->uart_dma.rx_buf_dma_phys), 0);
511 }
512 /*
513 * Finally, enable interrupts. Note: Modem status interrupts
514 * are set via set_termios(), which will be occurring imminently
515 * anyway, so we don't enable them here.
516 */
517 up->ier = UART_IER_RLSI | UART_IER_RDI;
518 serial_out(up, UART_IER, up->ier);
519
520 up->port_activity = jiffies;
521 return 0;
522}
523
524static void serial_omap_shutdown(struct uart_port *port)
525{
526 struct uart_omap_port *up = (struct uart_omap_port *)port;
527 unsigned long flags = 0;
528
529 dev_dbg(up->port.dev, "serial_omap_shutdown+%d\n", up->pdev->id);
530 /*
531 * Disable interrupts from this port
532 */
533 up->ier = 0;
534 serial_out(up, UART_IER, 0);
535
536 spin_lock_irqsave(&up->port.lock, flags);
537 up->port.mctrl &= ~TIOCM_OUT2;
538 serial_omap_set_mctrl(&up->port, up->port.mctrl);
539 spin_unlock_irqrestore(&up->port.lock, flags);
540
541 /*
542 * Disable break condition and FIFOs
543 */
544 serial_out(up, UART_LCR, serial_in(up, UART_LCR) & ~UART_LCR_SBC);
545 serial_omap_clear_fifos(up);
546
547 /*
548 * Read data port to reset things, and then free the irq
549 */
550 if (serial_in(up, UART_LSR) & UART_LSR_DR)
551 (void) serial_in(up, UART_RX);
552 if (up->use_dma) {
553 dma_free_coherent(up->port.dev,
554 UART_XMIT_SIZE, up->port.state->xmit.buf,
555 up->uart_dma.tx_buf_dma_phys);
556 up->port.state->xmit.buf = NULL;
557 serial_omap_stop_rx(port);
558 dma_free_coherent(up->port.dev,
559 up->uart_dma.rx_buf_size, up->uart_dma.rx_buf,
560 up->uart_dma.rx_buf_dma_phys);
561 up->uart_dma.rx_buf = NULL;
562 }
563 free_irq(up->port.irq, up);
564}
565
566static inline void
567serial_omap_configure_xonxoff
568 (struct uart_omap_port *up, struct ktermios *termios)
569{
570 unsigned char efr = 0;
571
572 up->lcr = serial_in(up, UART_LCR);
573 serial_out(up, UART_LCR, OMAP_UART_LCR_CONF_MDB);
574 up->efr = serial_in(up, UART_EFR);
575 serial_out(up, UART_EFR, up->efr & ~UART_EFR_ECB);
576
577 serial_out(up, UART_XON1, termios->c_cc[VSTART]);
578 serial_out(up, UART_XOFF1, termios->c_cc[VSTOP]);
579
580 /* clear SW control mode bits */
581 efr = up->efr;
582 efr &= OMAP_UART_SW_CLR;
583
584 /*
585 * IXON Flag:
586 * Enable XON/XOFF flow control on output.
587 * Transmit XON1, XOFF1
588 */
589 if (termios->c_iflag & IXON)
590 efr |= OMAP_UART_SW_TX;
591
592 /*
593 * IXOFF Flag:
594 * Enable XON/XOFF flow control on input.
595 * Receiver compares XON1, XOFF1.
596 */
597 if (termios->c_iflag & IXOFF)
598 efr |= OMAP_UART_SW_RX;
599
600 serial_out(up, UART_EFR, up->efr | UART_EFR_ECB);
601 serial_out(up, UART_LCR, UART_LCR_DLAB);
602
603 up->mcr = serial_in(up, UART_MCR);
604
605 /*
606 * IXANY Flag:
607 * Enable any character to restart output.
608 * Operation resumes after receiving any
609 * character after recognition of the XOFF character
610 */
611 if (termios->c_iflag & IXANY)
612 up->mcr |= UART_MCR_XONANY;
613
614 serial_out(up, UART_MCR, up->mcr | UART_MCR_TCRTLR);
615 serial_out(up, UART_LCR, OMAP_UART_LCR_CONF_MDB);
616 serial_out(up, UART_TI752_TCR, OMAP_UART_TCR_TRIG);
617 /* Enable special char function UARTi.EFR_REG[5] and
618 * load the new software flow control mode IXON or IXOFF
619 * and restore the UARTi.EFR_REG[4] ENHANCED_EN value.
620 */
621 serial_out(up, UART_EFR, efr | UART_EFR_SCD);
622 serial_out(up, UART_LCR, UART_LCR_DLAB);
623
624 serial_out(up, UART_MCR, up->mcr & ~UART_MCR_TCRTLR);
625 serial_out(up, UART_LCR, up->lcr);
626}
627
628static void
629serial_omap_set_termios(struct uart_port *port, struct ktermios *termios,
630 struct ktermios *old)
631{
632 struct uart_omap_port *up = (struct uart_omap_port *)port;
633 unsigned char cval = 0;
634 unsigned char efr = 0;
635 unsigned long flags = 0;
636 unsigned int baud, quot;
637
638 switch (termios->c_cflag & CSIZE) {
639 case CS5:
640 cval = UART_LCR_WLEN5;
641 break;
642 case CS6:
643 cval = UART_LCR_WLEN6;
644 break;
645 case CS7:
646 cval = UART_LCR_WLEN7;
647 break;
648 default:
649 case CS8:
650 cval = UART_LCR_WLEN8;
651 break;
652 }
653
654 if (termios->c_cflag & CSTOPB)
655 cval |= UART_LCR_STOP;
656 if (termios->c_cflag & PARENB)
657 cval |= UART_LCR_PARITY;
658 if (!(termios->c_cflag & PARODD))
659 cval |= UART_LCR_EPAR;
660
661 /*
662 * Ask the core to calculate the divisor for us.
663 */
664
665 baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/13);
666 quot = serial_omap_get_divisor(port, baud);
667
668 up->fcr = UART_FCR_R_TRIG_01 | UART_FCR_T_TRIG_01 |
669 UART_FCR_ENABLE_FIFO;
670 if (up->use_dma)
671 up->fcr |= UART_FCR_DMA_SELECT;
672
673 /*
674 * Ok, we're now changing the port state. Do it with
675 * interrupts disabled.
676 */
677 spin_lock_irqsave(&up->port.lock, flags);
678
679 /*
680 * Update the per-port timeout.
681 */
682 uart_update_timeout(port, termios->c_cflag, baud);
683
684 up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR;
685 if (termios->c_iflag & INPCK)
686 up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE;
687 if (termios->c_iflag & (BRKINT | PARMRK))
688 up->port.read_status_mask |= UART_LSR_BI;
689
690 /*
691 * Characters to ignore
692 */
693 up->port.ignore_status_mask = 0;
694 if (termios->c_iflag & IGNPAR)
695 up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE;
696 if (termios->c_iflag & IGNBRK) {
697 up->port.ignore_status_mask |= UART_LSR_BI;
698 /*
699 * If we're ignoring parity and break indicators,
700 * ignore overruns too (for real raw support).
701 */
702 if (termios->c_iflag & IGNPAR)
703 up->port.ignore_status_mask |= UART_LSR_OE;
704 }
705
706 /*
707 * ignore all characters if CREAD is not set
708 */
709 if ((termios->c_cflag & CREAD) == 0)
710 up->port.ignore_status_mask |= UART_LSR_DR;
711
712 /*
713 * Modem status interrupts
714 */
715 up->ier &= ~UART_IER_MSI;
716 if (UART_ENABLE_MS(&up->port, termios->c_cflag))
717 up->ier |= UART_IER_MSI;
718 serial_out(up, UART_IER, up->ier);
719 serial_out(up, UART_LCR, cval); /* reset DLAB */
720
721 /* FIFOs and DMA Settings */
722
723 /* FCR can be changed only when the
724 * baud clock is not running
725 * DLL_REG and DLH_REG set to 0.
726 */
727 serial_out(up, UART_LCR, UART_LCR_DLAB);
728 serial_out(up, UART_DLL, 0);
729 serial_out(up, UART_DLM, 0);
730 serial_out(up, UART_LCR, 0);
731
732 serial_out(up, UART_LCR, OMAP_UART_LCR_CONF_MDB);
733
734 up->efr = serial_in(up, UART_EFR);
735 serial_out(up, UART_EFR, up->efr | UART_EFR_ECB);
736
737 serial_out(up, UART_LCR, UART_LCR_DLAB);
738 up->mcr = serial_in(up, UART_MCR);
739 serial_out(up, UART_MCR, up->mcr | UART_MCR_TCRTLR);
740 /* FIFO ENABLE, DMA MODE */
741 serial_out(up, UART_FCR, up->fcr);
742 serial_out(up, UART_LCR, OMAP_UART_LCR_CONF_MDB);
743
744 if (up->use_dma) {
745 serial_out(up, UART_TI752_TLR, 0);
746 serial_out(up, UART_OMAP_SCR,
747 (UART_FCR_TRIGGER_4 | UART_FCR_TRIGGER_8));
748 }
749
750 serial_out(up, UART_EFR, up->efr);
751 serial_out(up, UART_LCR, UART_LCR_DLAB);
752 serial_out(up, UART_MCR, up->mcr);
753
754 /* Protocol, Baud Rate, and Interrupt Settings */
755
756 serial_out(up, UART_OMAP_MDR1, OMAP_MDR1_DISABLE);
757 serial_out(up, UART_LCR, OMAP_UART_LCR_CONF_MDB);
758
759 up->efr = serial_in(up, UART_EFR);
760 serial_out(up, UART_EFR, up->efr | UART_EFR_ECB);
761
762 serial_out(up, UART_LCR, 0);
763 serial_out(up, UART_IER, 0);
764 serial_out(up, UART_LCR, OMAP_UART_LCR_CONF_MDB);
765
766 serial_out(up, UART_DLL, quot & 0xff); /* LS of divisor */
767 serial_out(up, UART_DLM, quot >> 8); /* MS of divisor */
768
769 serial_out(up, UART_LCR, 0);
770 serial_out(up, UART_IER, up->ier);
771 serial_out(up, UART_LCR, OMAP_UART_LCR_CONF_MDB);
772
773 serial_out(up, UART_EFR, up->efr);
774 serial_out(up, UART_LCR, cval);
775
776 if (baud > 230400 && baud != 3000000)
777 serial_out(up, UART_OMAP_MDR1, OMAP_MDR1_MODE13X);
778 else
779 serial_out(up, UART_OMAP_MDR1, OMAP_MDR1_MODE16X);
780
781 /* Hardware Flow Control Configuration */
782
783 if (termios->c_cflag & CRTSCTS) {
784 efr |= (UART_EFR_CTS | UART_EFR_RTS);
785 serial_out(up, UART_LCR, UART_LCR_DLAB);
786
787 up->mcr = serial_in(up, UART_MCR);
788 serial_out(up, UART_MCR, up->mcr | UART_MCR_TCRTLR);
789
790 serial_out(up, UART_LCR, OMAP_UART_LCR_CONF_MDB);
791 up->efr = serial_in(up, UART_EFR);
792 serial_out(up, UART_EFR, up->efr | UART_EFR_ECB);
793
794 serial_out(up, UART_TI752_TCR, OMAP_UART_TCR_TRIG);
795 serial_out(up, UART_EFR, efr); /* Enable AUTORTS and AUTOCTS */
796 serial_out(up, UART_LCR, UART_LCR_DLAB);
797 serial_out(up, UART_MCR, up->mcr | UART_MCR_RTS);
798 serial_out(up, UART_LCR, cval);
799 }
800
801 serial_omap_set_mctrl(&up->port, up->port.mctrl);
802 /* Software Flow Control Configuration */
803 if (termios->c_iflag & (IXON | IXOFF))
804 serial_omap_configure_xonxoff(up, termios);
805
806 spin_unlock_irqrestore(&up->port.lock, flags);
807 dev_dbg(up->port.dev, "serial_omap_set_termios+%d\n", up->pdev->id);
808}
809
810static void
811serial_omap_pm(struct uart_port *port, unsigned int state,
812 unsigned int oldstate)
813{
814 struct uart_omap_port *up = (struct uart_omap_port *)port;
815 unsigned char efr;
816
817 dev_dbg(up->port.dev, "serial_omap_pm+%d\n", up->pdev->id);
818 serial_out(up, UART_LCR, OMAP_UART_LCR_CONF_MDB);
819 efr = serial_in(up, UART_EFR);
820 serial_out(up, UART_EFR, efr | UART_EFR_ECB);
821 serial_out(up, UART_LCR, 0);
822
823 serial_out(up, UART_IER, (state != 0) ? UART_IERX_SLEEP : 0);
824 serial_out(up, UART_LCR, OMAP_UART_LCR_CONF_MDB);
825 serial_out(up, UART_EFR, efr);
826 serial_out(up, UART_LCR, 0);
827 /* Enable module level wake up */
828 serial_out(up, UART_OMAP_WER,
829 (state != 0) ? OMAP_UART_WER_MOD_WKUP : 0);
830}
831
832static void serial_omap_release_port(struct uart_port *port)
833{
834 dev_dbg(port->dev, "serial_omap_release_port+\n");
835}
836
837static int serial_omap_request_port(struct uart_port *port)
838{
839 dev_dbg(port->dev, "serial_omap_request_port+\n");
840 return 0;
841}
842
843static void serial_omap_config_port(struct uart_port *port, int flags)
844{
845 struct uart_omap_port *up = (struct uart_omap_port *)port;
846
847 dev_dbg(up->port.dev, "serial_omap_config_port+%d\n",
848 up->pdev->id);
849 up->port.type = PORT_OMAP;
850}
851
852static int
853serial_omap_verify_port(struct uart_port *port, struct serial_struct *ser)
854{
855 /* we don't want the core code to modify any port params */
856 dev_dbg(port->dev, "serial_omap_verify_port+\n");
857 return -EINVAL;
858}
859
860static const char *
861serial_omap_type(struct uart_port *port)
862{
863 struct uart_omap_port *up = (struct uart_omap_port *)port;
864
865 dev_dbg(up->port.dev, "serial_omap_type+%d\n", up->pdev->id);
866 return up->name;
867}
868
869#ifdef CONFIG_SERIAL_OMAP_CONSOLE
870
871static struct uart_omap_port *serial_omap_console_ports[4];
872
873static struct uart_driver serial_omap_reg;
874
875#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
876
877static inline void wait_for_xmitr(struct uart_omap_port *up)
878{
879 unsigned int status, tmout = 10000;
880
881 /* Wait up to 10ms for the character(s) to be sent. */
882 do {
883 status = serial_in(up, UART_LSR);
884
885 if (status & UART_LSR_BI)
886 up->lsr_break_flag = UART_LSR_BI;
887
888 if (--tmout == 0)
889 break;
890 udelay(1);
891 } while ((status & BOTH_EMPTY) != BOTH_EMPTY);
892
893 /* Wait up to 1s for flow control if necessary */
894 if (up->port.flags & UPF_CONS_FLOW) {
895 tmout = 1000000;
896 for (tmout = 1000000; tmout; tmout--) {
897 unsigned int msr = serial_in(up, UART_MSR);
898
899 up->msr_saved_flags |= msr & MSR_SAVE_FLAGS;
900 if (msr & UART_MSR_CTS)
901 break;
902
903 udelay(1);
904 }
905 }
906}
907
908static void serial_omap_console_putchar(struct uart_port *port, int ch)
909{
910 struct uart_omap_port *up = (struct uart_omap_port *)port;
911
912 wait_for_xmitr(up);
913 serial_out(up, UART_TX, ch);
914}
915
916static void
917serial_omap_console_write(struct console *co, const char *s,
918 unsigned int count)
919{
920 struct uart_omap_port *up = serial_omap_console_ports[co->index];
921 unsigned long flags;
922 unsigned int ier;
923 int locked = 1;
924
925 local_irq_save(flags);
926 if (up->port.sysrq)
927 locked = 0;
928 else if (oops_in_progress)
929 locked = spin_trylock(&up->port.lock);
930 else
931 spin_lock(&up->port.lock);
932
933 /*
934 * First save the IER then disable the interrupts
935 */
936 ier = serial_in(up, UART_IER);
937 serial_out(up, UART_IER, 0);
938
939 uart_console_write(&up->port, s, count, serial_omap_console_putchar);
940
941 /*
942 * Finally, wait for transmitter to become empty
943 * and restore the IER
944 */
945 wait_for_xmitr(up);
946 serial_out(up, UART_IER, ier);
947 /*
948 * The receive handling will happen properly because the
949 * receive ready bit will still be set; it is not cleared
950 * on read. However, modem control will not, we must
951 * call it if we have saved something in the saved flags
952 * while processing with interrupts off.
953 */
954 if (up->msr_saved_flags)
955 check_modem_status(up);
956
957 if (locked)
958 spin_unlock(&up->port.lock);
959 local_irq_restore(flags);
960}
961
962static int __init
963serial_omap_console_setup(struct console *co, char *options)
964{
965 struct uart_omap_port *up;
966 int baud = 115200;
967 int bits = 8;
968 int parity = 'n';
969 int flow = 'n';
970
971 if (serial_omap_console_ports[co->index] == NULL)
972 return -ENODEV;
973 up = serial_omap_console_ports[co->index];
974
975 if (options)
976 uart_parse_options(options, &baud, &parity, &bits, &flow);
977
978 return uart_set_options(&up->port, co, baud, parity, bits, flow);
979}
980
981static struct console serial_omap_console = {
982 .name = OMAP_SERIAL_NAME,
983 .write = serial_omap_console_write,
984 .device = uart_console_device,
985 .setup = serial_omap_console_setup,
986 .flags = CON_PRINTBUFFER,
987 .index = -1,
988 .data = &serial_omap_reg,
989};
990
991static void serial_omap_add_console_port(struct uart_omap_port *up)
992{
993 serial_omap_console_ports[up->pdev->id] = up;
994}
995
996#define OMAP_CONSOLE (&serial_omap_console)
997
998#else
999
1000#define OMAP_CONSOLE NULL
1001
1002static inline void serial_omap_add_console_port(struct uart_omap_port *up)
1003{}
1004
1005#endif
1006
1007static struct uart_ops serial_omap_pops = {
1008 .tx_empty = serial_omap_tx_empty,
1009 .set_mctrl = serial_omap_set_mctrl,
1010 .get_mctrl = serial_omap_get_mctrl,
1011 .stop_tx = serial_omap_stop_tx,
1012 .start_tx = serial_omap_start_tx,
1013 .stop_rx = serial_omap_stop_rx,
1014 .enable_ms = serial_omap_enable_ms,
1015 .break_ctl = serial_omap_break_ctl,
1016 .startup = serial_omap_startup,
1017 .shutdown = serial_omap_shutdown,
1018 .set_termios = serial_omap_set_termios,
1019 .pm = serial_omap_pm,
1020 .type = serial_omap_type,
1021 .release_port = serial_omap_release_port,
1022 .request_port = serial_omap_request_port,
1023 .config_port = serial_omap_config_port,
1024 .verify_port = serial_omap_verify_port,
1025};
1026
1027static struct uart_driver serial_omap_reg = {
1028 .owner = THIS_MODULE,
1029 .driver_name = "OMAP-SERIAL",
1030 .dev_name = OMAP_SERIAL_NAME,
1031 .nr = OMAP_MAX_HSUART_PORTS,
1032 .cons = OMAP_CONSOLE,
1033};
1034
1035static int
1036serial_omap_suspend(struct platform_device *pdev, pm_message_t state)
1037{
1038 struct uart_omap_port *up = platform_get_drvdata(pdev);
1039
1040 if (up)
1041 uart_suspend_port(&serial_omap_reg, &up->port);
1042 return 0;
1043}
1044
1045static int serial_omap_resume(struct platform_device *dev)
1046{
1047 struct uart_omap_port *up = platform_get_drvdata(dev);
1048
1049 if (up)
1050 uart_resume_port(&serial_omap_reg, &up->port);
1051 return 0;
1052}
1053
1054static void serial_omap_rx_timeout(unsigned long uart_no)
1055{
1056 struct uart_omap_port *up = ui[uart_no];
1057 unsigned int curr_dma_pos, curr_transmitted_size;
1058 unsigned int ret = 0;
1059
1060 curr_dma_pos = omap_get_dma_dst_pos(up->uart_dma.rx_dma_channel);
1061 if ((curr_dma_pos == up->uart_dma.prev_rx_dma_pos) ||
1062 (curr_dma_pos == 0)) {
1063 if (jiffies_to_msecs(jiffies - up->port_activity) <
1064 RX_TIMEOUT) {
1065 mod_timer(&up->uart_dma.rx_timer, jiffies +
1066 usecs_to_jiffies(up->uart_dma.rx_timeout));
1067 } else {
1068 serial_omap_stop_rxdma(up);
1069 up->ier |= (UART_IER_RDI | UART_IER_RLSI);
1070 serial_out(up, UART_IER, up->ier);
1071 }
1072 return;
1073 }
1074
1075 curr_transmitted_size = curr_dma_pos -
1076 up->uart_dma.prev_rx_dma_pos;
1077 up->port.icount.rx += curr_transmitted_size;
1078 tty_insert_flip_string(up->port.state->port.tty,
1079 up->uart_dma.rx_buf +
1080 (up->uart_dma.prev_rx_dma_pos -
1081 up->uart_dma.rx_buf_dma_phys),
1082 curr_transmitted_size);
1083 tty_flip_buffer_push(up->port.state->port.tty);
1084 up->uart_dma.prev_rx_dma_pos = curr_dma_pos;
1085 if (up->uart_dma.rx_buf_size +
1086 up->uart_dma.rx_buf_dma_phys == curr_dma_pos) {
1087 ret = serial_omap_start_rxdma(up);
1088 if (ret < 0) {
1089 serial_omap_stop_rxdma(up);
1090 up->ier |= (UART_IER_RDI | UART_IER_RLSI);
1091 serial_out(up, UART_IER, up->ier);
1092 }
1093 } else {
1094 mod_timer(&up->uart_dma.rx_timer, jiffies +
1095 usecs_to_jiffies(up->uart_dma.rx_timeout));
1096 }
1097 up->port_activity = jiffies;
1098}
1099
1100static void uart_rx_dma_callback(int lch, u16 ch_status, void *data)
1101{
1102 return;
1103}
1104
1105static int serial_omap_start_rxdma(struct uart_omap_port *up)
1106{
1107 int ret = 0;
1108
1109 if (up->uart_dma.rx_dma_channel == -1) {
1110 ret = omap_request_dma(up->uart_dma.uart_dma_rx,
1111 "UART Rx DMA",
1112 (void *)uart_rx_dma_callback, up,
1113 &(up->uart_dma.rx_dma_channel));
1114 if (ret < 0)
1115 return ret;
1116
1117 omap_set_dma_src_params(up->uart_dma.rx_dma_channel, 0,
1118 OMAP_DMA_AMODE_CONSTANT,
1119 up->uart_dma.uart_base, 0, 0);
1120 omap_set_dma_dest_params(up->uart_dma.rx_dma_channel, 0,
1121 OMAP_DMA_AMODE_POST_INC,
1122 up->uart_dma.rx_buf_dma_phys, 0, 0);
1123 omap_set_dma_transfer_params(up->uart_dma.rx_dma_channel,
1124 OMAP_DMA_DATA_TYPE_S8,
1125 up->uart_dma.rx_buf_size, 1,
1126 OMAP_DMA_SYNC_ELEMENT,
1127 up->uart_dma.uart_dma_rx, 0);
1128 }
1129 up->uart_dma.prev_rx_dma_pos = up->uart_dma.rx_buf_dma_phys;
1130 /* FIXME: Cache maintenance needed here? */
1131 omap_start_dma(up->uart_dma.rx_dma_channel);
1132 mod_timer(&up->uart_dma.rx_timer, jiffies +
1133 usecs_to_jiffies(up->uart_dma.rx_timeout));
1134 up->uart_dma.rx_dma_used = true;
1135 return ret;
1136}
1137
1138static void serial_omap_continue_tx(struct uart_omap_port *up)
1139{
1140 struct circ_buf *xmit = &up->port.state->xmit;
1141 unsigned int start = up->uart_dma.tx_buf_dma_phys
1142 + (xmit->tail & (UART_XMIT_SIZE - 1));
1143
1144 if (uart_circ_empty(xmit))
1145 return;
1146
1147 up->uart_dma.tx_buf_size = uart_circ_chars_pending(xmit);
1148 /*
1149 * It is a circular buffer. See if the buffer has wounded back.
1150 * If yes it will have to be transferred in two separate dma
1151 * transfers
1152 */
1153 if (start + up->uart_dma.tx_buf_size >=
1154 up->uart_dma.tx_buf_dma_phys + UART_XMIT_SIZE)
1155 up->uart_dma.tx_buf_size =
1156 (up->uart_dma.tx_buf_dma_phys + UART_XMIT_SIZE) - start;
1157 omap_set_dma_dest_params(up->uart_dma.tx_dma_channel, 0,
1158 OMAP_DMA_AMODE_CONSTANT,
1159 up->uart_dma.uart_base, 0, 0);
1160 omap_set_dma_src_params(up->uart_dma.tx_dma_channel, 0,
1161 OMAP_DMA_AMODE_POST_INC, start, 0, 0);
1162 omap_set_dma_transfer_params(up->uart_dma.tx_dma_channel,
1163 OMAP_DMA_DATA_TYPE_S8,
1164 up->uart_dma.tx_buf_size, 1,
1165 OMAP_DMA_SYNC_ELEMENT,
1166 up->uart_dma.uart_dma_tx, 0);
1167 /* FIXME: Cache maintenance needed here? */
1168 omap_start_dma(up->uart_dma.tx_dma_channel);
1169}
1170
1171static void uart_tx_dma_callback(int lch, u16 ch_status, void *data)
1172{
1173 struct uart_omap_port *up = (struct uart_omap_port *)data;
1174 struct circ_buf *xmit = &up->port.state->xmit;
1175
1176 xmit->tail = (xmit->tail + up->uart_dma.tx_buf_size) & \
1177 (UART_XMIT_SIZE - 1);
1178 up->port.icount.tx += up->uart_dma.tx_buf_size;
1179
1180 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
1181 uart_write_wakeup(&up->port);
1182
1183 if (uart_circ_empty(xmit)) {
1184 spin_lock(&(up->uart_dma.tx_lock));
1185 serial_omap_stop_tx(&up->port);
1186 up->uart_dma.tx_dma_used = false;
1187 spin_unlock(&(up->uart_dma.tx_lock));
1188 } else {
1189 omap_stop_dma(up->uart_dma.tx_dma_channel);
1190 serial_omap_continue_tx(up);
1191 }
1192 up->port_activity = jiffies;
1193 return;
1194}
1195
1196static int serial_omap_probe(struct platform_device *pdev)
1197{
1198 struct uart_omap_port *up;
1199 struct resource *mem, *irq, *dma_tx, *dma_rx;
1200 struct omap_uart_port_info *omap_up_info = pdev->dev.platform_data;
1201 int ret = -ENOSPC;
1202
1203 mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1204 if (!mem) {
1205 dev_err(&pdev->dev, "no mem resource?\n");
1206 return -ENODEV;
1207 }
1208
1209 irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
1210 if (!irq) {
1211 dev_err(&pdev->dev, "no irq resource?\n");
1212 return -ENODEV;
1213 }
1214
1215 if (!request_mem_region(mem->start, (mem->end - mem->start) + 1,
1216 pdev->dev.driver->name)) {
1217 dev_err(&pdev->dev, "memory region already claimed\n");
1218 return -EBUSY;
1219 }
1220
1221 dma_rx = platform_get_resource_byname(pdev, IORESOURCE_DMA, "rx");
1222 if (!dma_rx) {
1223 ret = -EINVAL;
1224 goto err;
1225 }
1226
1227 dma_tx = platform_get_resource_byname(pdev, IORESOURCE_DMA, "tx");
1228 if (!dma_tx) {
1229 ret = -EINVAL;
1230 goto err;
1231 }
1232
1233 up = kzalloc(sizeof(*up), GFP_KERNEL);
1234 if (up == NULL) {
1235 ret = -ENOMEM;
1236 goto do_release_region;
1237 }
1238 sprintf(up->name, "OMAP UART%d", pdev->id);
1239 up->pdev = pdev;
1240 up->port.dev = &pdev->dev;
1241 up->port.type = PORT_OMAP;
1242 up->port.iotype = UPIO_MEM;
1243 up->port.irq = irq->start;
1244
1245 up->port.regshift = 2;
1246 up->port.fifosize = 64;
1247 up->port.ops = &serial_omap_pops;
1248 up->port.line = pdev->id;
1249
1250 up->port.membase = omap_up_info->membase;
1251 up->port.mapbase = omap_up_info->mapbase;
1252 up->port.flags = omap_up_info->flags;
1253 up->port.irqflags = omap_up_info->irqflags;
1254 up->port.uartclk = omap_up_info->uartclk;
1255 up->uart_dma.uart_base = mem->start;
1256
1257 if (omap_up_info->dma_enabled) {
1258 up->uart_dma.uart_dma_tx = dma_tx->start;
1259 up->uart_dma.uart_dma_rx = dma_rx->start;
1260 up->use_dma = 1;
1261 up->uart_dma.rx_buf_size = 4096;
1262 up->uart_dma.rx_timeout = 2;
1263 spin_lock_init(&(up->uart_dma.tx_lock));
1264 spin_lock_init(&(up->uart_dma.rx_lock));
1265 up->uart_dma.tx_dma_channel = OMAP_UART_DMA_CH_FREE;
1266 up->uart_dma.rx_dma_channel = OMAP_UART_DMA_CH_FREE;
1267 }
1268
1269 ui[pdev->id] = up;
1270 serial_omap_add_console_port(up);
1271
1272 ret = uart_add_one_port(&serial_omap_reg, &up->port);
1273 if (ret != 0)
1274 goto do_release_region;
1275
1276 platform_set_drvdata(pdev, up);
1277 return 0;
1278err:
1279 dev_err(&pdev->dev, "[UART%d]: failure [%s]: %d\n",
1280 pdev->id, __func__, ret);
1281do_release_region:
1282 release_mem_region(mem->start, (mem->end - mem->start) + 1);
1283 return ret;
1284}
1285
1286static int serial_omap_remove(struct platform_device *dev)
1287{
1288 struct uart_omap_port *up = platform_get_drvdata(dev);
1289
1290 platform_set_drvdata(dev, NULL);
1291 if (up) {
1292 uart_remove_one_port(&serial_omap_reg, &up->port);
1293 kfree(up);
1294 }
1295 return 0;
1296}
1297
1298static struct platform_driver serial_omap_driver = {
1299 .probe = serial_omap_probe,
1300 .remove = serial_omap_remove,
1301
1302 .suspend = serial_omap_suspend,
1303 .resume = serial_omap_resume,
1304 .driver = {
1305 .name = DRIVER_NAME,
1306 },
1307};
1308
1309static int __init serial_omap_init(void)
1310{
1311 int ret;
1312
1313 ret = uart_register_driver(&serial_omap_reg);
1314 if (ret != 0)
1315 return ret;
1316 ret = platform_driver_register(&serial_omap_driver);
1317 if (ret != 0)
1318 uart_unregister_driver(&serial_omap_reg);
1319 return ret;
1320}
1321
1322static void __exit serial_omap_exit(void)
1323{
1324 platform_driver_unregister(&serial_omap_driver);
1325 uart_unregister_driver(&serial_omap_reg);
1326}
1327
1328module_init(serial_omap_init);
1329module_exit(serial_omap_exit);
1330
1331MODULE_DESCRIPTION("OMAP High Speed UART driver");
1332MODULE_LICENSE("GPL");
1333MODULE_AUTHOR("Texas Instruments Inc");
generated by cgit v1.2.2 (git 2.25.0) at 2024-11-04 13:26:50 -0500