1 files changed, 249 insertions, 138 deletions

diff --git a/drivers/serial/ioc4_serial.c b/drivers/serial/ioc4_serial.c
index a37579ce6d76..c620209d7b9a 100644
--- a/drivers/serial/ioc4_serial.c
+++ b/drivers/serial/ioc4_serial.c
@@ -3,7 +3,7 @@
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  *
- * Copyright (C) 2003-2005 Silicon Graphics, Inc.  All Rights Reserved.
+ * Copyright (C) 2003-2006 Silicon Graphics, Inc.  All Rights Reserved.
  */
 
 
@@ -323,9 +323,12 @@ static unsigned int Num_of_ioc4_cards;
 #define IOC4_FIFO_CHARS 255
 
 /* Device name we're using */
-#define DEVICE_NAME     "ttyIOC"
-#define DEVICE_MAJOR 204
-#define DEVICE_MINOR 50
+#define DEVICE_NAME_RS232  "ttyIOC"
+#define DEVICE_NAME_RS422  "ttyAIOC"
+#define DEVICE_MAJOR       204
+#define DEVICE_MINOR_RS232 50
+#define DEVICE_MINOR_RS422 84
+
 
 /* register offsets */
 #define IOC4_SERIAL_OFFSET      0x300
@@ -341,10 +344,8 @@ static unsigned int Num_of_ioc4_cards;
 #define MAX_BAUD_SUPPORTED      115200
 
 /* protocol types supported */
-enum sio_proto {
-        PROTO_RS232,
-        PROTO_RS422
-};
+#define PROTO_RS232     3
+#define PROTO_RS422     7
 
 /* Notification types */
 #define N_DATA_READY    0x01
@@ -395,11 +396,17 @@ enum sio_proto {
 /*
  * This is the entry saved by the driver - one per card
  */
+
+#define UART_PORT_MIN           0
+#define UART_PORT_RS232         UART_PORT_MIN
+#define UART_PORT_RS422         1
+#define UART_PORT_COUNT         2       /* one for each mode */
+
 struct ioc4_control {
         int ic_irq;
         struct {
-                /* uart ports are allocated here */
-                struct uart_port icp_uart_port;
+                /* uart ports are allocated here - 1 for rs232, 1 for rs422 */
+                struct uart_port icp_uart_port[UART_PORT_COUNT];
                 /* Handy reference material */
                 struct ioc4_port *icp_port;
         } ic_port[IOC4_NUM_SERIAL_PORTS];
@@ -443,7 +450,9 @@ struct ioc4_soft {
 
 /* Local port info for each IOC4 serial ports */
 struct ioc4_port {
-        struct uart_port *ip_port;
+        struct uart_port *ip_port;      /* current active port ptr */
+        /* Ptrs for all ports */
+        struct uart_port *ip_all_ports[UART_PORT_COUNT];
         /* Back ptrs for this port */
         struct ioc4_control *ip_control;
         struct pci_dev *ip_pdev;
@@ -502,6 +511,9 @@ struct ioc4_port {
 #define DCD_ON          0x02
 #define LOWAT_WRITTEN   0x04
 #define READ_ABORTED    0x08
+#define PORT_ACTIVE     0x10
+#define PORT_INACTIVE   0       /* This is the value when "off" */
+
 
 /* Since each port has different register offsets and bitmasks
  * for everything, we'll store those that we need in tables so we
@@ -623,6 +635,23 @@ struct ring_buffer {
 static void receive_chars(struct uart_port *);
 static void handle_intr(void *arg, uint32_t sio_ir);
 
+/*
+ * port_is_active - determines if this port is currently active
+ * @port: ptr to soft struct for this port
+ * @uart_port: uart port to test for
+ */
+static inline int port_is_active(struct ioc4_port *port,
+                struct uart_port *uart_port)
+{
+        if (port) {
+                if ((port->ip_flags & PORT_ACTIVE)
+                                        && (port->ip_port == uart_port))
+                        return 1;
+        }
+        return 0;
+}
+
+
 /**
  * write_ireg - write the interrupt regs
  * @ioc4_soft: ptr to soft struct for this port
@@ -708,19 +737,33 @@ static int set_baud(struct ioc4_port *port, int baud)
 /**
  * get_ioc4_port - given a uart port, return the control structure
  * @port: uart port
+ * @set: set this port as current
  */
-static struct ioc4_port *get_ioc4_port(struct uart_port *the_port)
+static struct ioc4_port *get_ioc4_port(struct uart_port *the_port, int set)
 {
         struct ioc4_driver_data *idd = dev_get_drvdata(the_port->dev);
         struct ioc4_control *control = idd->idd_serial_data;
-        int ii;
+        struct ioc4_port *port;
+        int port_num, port_type;
 
         if (control) {
-                for ( ii = 0; ii < IOC4_NUM_SERIAL_PORTS; ii++ ) {
-                        if (!control->ic_port[ii].icp_port)
+                for ( port_num = 0; port_num < IOC4_NUM_SERIAL_PORTS;
+                                                        port_num++ ) {
+                        port = control->ic_port[port_num].icp_port;
+                        if (!port)
                                 continue;
-                        if (the_port == control->ic_port[ii].icp_port->ip_port)
-                                return control->ic_port[ii].icp_port;
+                        for (port_type = UART_PORT_MIN;
+                                                port_type < UART_PORT_COUNT;
+                                                port_type++) {
+                                if (the_port == port->ip_all_ports
+                                                        [port_type]) {
+                                        /* set local copy */
+                                        if (set) {
+                                                port->ip_port = the_port;
+                                        }
+                                        return port;
+                                }
+                        }
                 }
         }
         return NULL;
@@ -946,6 +989,7 @@ intr_connect(struct ioc4_soft *soft, int type,
  * @arg: handler arg
  * @regs: registers
  */
+
 static irqreturn_t ioc4_intr(int irq, void *arg, struct pt_regs *regs)
 {
         struct ioc4_soft *soft;
@@ -953,7 +997,7 @@ static irqreturn_t ioc4_intr(int irq, void *arg, struct pt_regs *regs)
         int xx, num_intrs = 0;
         int intr_type;
         int handled = 0;
-        struct ioc4_intr_info *ii;
+        struct ioc4_intr_info *intr_info;
 
         soft = arg;
         for (intr_type = 0; intr_type < IOC4_NUM_INTR_TYPES; intr_type++) {
@@ -966,13 +1010,13 @@ static irqreturn_t ioc4_intr(int irq, void *arg, struct pt_regs *regs)
                  * which interrupt bits are set.
                  */
                 for (xx = 0; xx < num_intrs; xx++) {
-                        ii = &soft->is_intr_type[intr_type].is_intr_info[xx];
-                        if ((this_mir = this_ir & ii->sd_bits)) {
+                        intr_info = &soft->is_intr_type[intr_type].is_intr_info[xx];
+                        if ((this_mir = this_ir & intr_info->sd_bits)) {
                                 /* Disable owned interrupts, call handler */
                                 handled++;
-                                write_ireg(soft, ii->sd_bits, IOC4_W_IEC,
+                                write_ireg(soft, intr_info->sd_bits, IOC4_W_IEC,
                                                                 intr_type);
-                                ii->sd_intr(ii->sd_info, this_mir);
+                                intr_info->sd_intr(intr_info->sd_info, this_mir);
                                 this_ir &= ~this_mir;
                         }
                 }
@@ -980,7 +1024,6 @@ static irqreturn_t ioc4_intr(int irq, void *arg, struct pt_regs *regs)
 #ifdef DEBUG_INTERRUPTS
         {
                 struct ioc4_misc_regs __iomem *mem = soft->is_ioc4_misc_addr;
-                spinlock_t *lp = &soft->is_ir_lock;
                 unsigned long flag;
 
                 spin_lock_irqsave(&soft->is_ir_lock, flag);
@@ -1177,7 +1220,7 @@ static inline int local_open(struct ioc4_port *port)
 {
         int spiniter = 0;
 
-        port->ip_flags = 0;
+        port->ip_flags = PORT_ACTIVE;
 
         /* Pause the DMA interface if necessary */
         if (port->ip_sscr & IOC4_SSCR_DMA_EN) {
@@ -1187,6 +1230,7 @@ static inline int local_open(struct ioc4_port *port)
                                 & IOC4_SSCR_PAUSE_STATE) == 0) {
                         spiniter++;
                         if (spiniter > MAXITER) {
+                                port->ip_flags = PORT_INACTIVE;
                                 return -1;
                         }
                 }
@@ -1506,14 +1550,13 @@ static int set_notification(struct ioc4_port *port, int mask, int set_on)
 /**
  * set_mcr - set the master control reg
  * @the_port: port to use
- * @set: set ?
  * @mask1: mcr mask
  * @mask2: shadow mask
  */
-static inline int set_mcr(struct uart_port *the_port, int set,
+static inline int set_mcr(struct uart_port *the_port,
                 int mask1, int mask2)
 {
-        struct ioc4_port *port = get_ioc4_port(the_port);
+        struct ioc4_port *port = get_ioc4_port(the_port, 0);
         uint32_t shadow;
         int spiniter = 0;
         char mcr;
@@ -1536,13 +1579,9 @@ static inline int set_mcr(struct uart_port *the_port, int set,
         mcr = (shadow & 0xff000000) >> 24;
 
         /* Set new value */
-        if (set) {
-                mcr |= mask1;
-                shadow |= mask2;
-        } else {
-                mcr &= ~mask1;
-                shadow &= ~mask2;
-        }
+        mcr |= mask1;
+        shadow |= mask2;
+
         writeb(mcr, &port->ip_uart_regs->i4u_mcr);
         writel(shadow, &port->ip_serial_regs->shadow);
 
@@ -1558,7 +1597,7 @@ static inline int set_mcr(struct uart_port *the_port, int set,
  * @port: port to use
  * @proto: protocol to use
  */
-static int ioc4_set_proto(struct ioc4_port *port, enum sio_proto proto)
+static int ioc4_set_proto(struct ioc4_port *port, int proto)
 {
         struct hooks *hooks = port->ip_hooks;
 
@@ -1589,7 +1628,7 @@ static void transmit_chars(struct uart_port *the_port)
         int result;
         char *start;
         struct tty_struct *tty;
-        struct ioc4_port *port = get_ioc4_port(the_port);
+        struct ioc4_port *port = get_ioc4_port(the_port, 0);
         struct uart_info *info;
 
         if (!the_port)
@@ -1645,7 +1684,7 @@ static void
 ioc4_change_speed(struct uart_port *the_port,
                   struct termios *new_termios, struct termios *old_termios)
 {
-        struct ioc4_port *port = get_ioc4_port(the_port);
+        struct ioc4_port *port = get_ioc4_port(the_port, 0);
         int baud, bits;
         unsigned cflag;
         int new_parity = 0, new_parity_enable = 0, new_stop = 0, new_data = 8;
@@ -1752,7 +1791,7 @@ static inline int ic4_startup_local(struct uart_port *the_port)
         if (!the_port)
                 return -1;
 
-        port = get_ioc4_port(the_port);
+        port = get_ioc4_port(the_port, 0);
         if (!port)
                 return -1;
 
@@ -1760,6 +1799,9 @@ static inline int ic4_startup_local(struct uart_port *the_port)
 
         local_open(port);
 
+        /* set the protocol - mapbase has the port type */
+        ioc4_set_proto(port, the_port->mapbase);
+
         /* set the speed of the serial port */
         ioc4_change_speed(the_port, info->tty->termios, (struct termios *)0);
 
@@ -1768,17 +1810,17 @@ static inline int ic4_startup_local(struct uart_port *the_port)
 
 /*
  * ioc4_cb_output_lowat - called when the output low water mark is hit
- * @port: port to output
+ * @the_port: port to output
  */
-static void ioc4_cb_output_lowat(struct ioc4_port *port)
+static void ioc4_cb_output_lowat(struct uart_port *the_port)
 {
         unsigned long pflags;
 
         /* ip_lock is set on the call here */
-        if (port->ip_port) {
-                spin_lock_irqsave(&port->ip_port->lock, pflags);
-                transmit_chars(port->ip_port);
-                spin_unlock_irqrestore(&port->ip_port->lock, pflags);
+        if (the_port) {
+                spin_lock_irqsave(&the_port->lock, pflags);
+                transmit_chars(the_port);
+                spin_unlock_irqrestore(&the_port->lock, pflags);
         }
 }
 
@@ -1923,7 +1965,7 @@ static void handle_intr(void *arg, uint32_t sio_ir)
                                         &port->ip_mem->sio_ir.raw);
 
                         if (port->ip_notify & N_OUTPUT_LOWAT)
-                                ioc4_cb_output_lowat(port);
+                                ioc4_cb_output_lowat(port->ip_port);
                 }
 
                 /* Handle tx_mt.  Must come after tx_explicit.  */
@@ -1936,7 +1978,7 @@ static void handle_intr(void *arg, uint32_t sio_ir)
                          * So send the notification now.
                          */
                         if (port->ip_notify & N_OUTPUT_LOWAT) {
-                                ioc4_cb_output_lowat(port);
+                                ioc4_cb_output_lowat(port->ip_port);
 
                                 /* We need to reload the sio_ir since the lowat
                                  * call may have caused another write to occur,
@@ -2023,7 +2065,7 @@ static inline int do_read(struct uart_port *the_port, unsigned char *buf,
                                 int len)
 {
         int prod_ptr, cons_ptr, total;
-        struct ioc4_port *port = get_ioc4_port(the_port);
+        struct ioc4_port *port = get_ioc4_port(the_port, 0);
         struct ring *inring;
         struct ring_entry *entry;
         struct hooks *hooks = port->ip_hooks;
@@ -2335,17 +2377,27 @@ static void receive_chars(struct uart_port *the_port)
  */
 static const char *ic4_type(struct uart_port *the_port)
 {
-        return "SGI IOC4 Serial";
+        if (the_port->mapbase == PROTO_RS232)
+                return "SGI IOC4 Serial [rs232]";
+        else
+                return "SGI IOC4 Serial [rs422]";
 }
 
 /**
- * ic4_tx_empty - Is the transmitter empty?  We pretend we're always empty
- * @port: Port to operate on (we ignore since we always return 1)
+ * ic4_tx_empty - Is the transmitter empty?
+ * @port: Port to operate on
  *
  */
 static unsigned int ic4_tx_empty(struct uart_port *the_port)
 {
-        return 1;
+        struct ioc4_port *port = get_ioc4_port(the_port, 0);
+        unsigned int ret = 0;
+
+        if (port_is_active(port, the_port)) {
+                if (readl(&port->ip_serial_regs->shadow) & IOC4_SHADOW_TEMT)
+                        ret = TIOCSER_TEMT;
+        }
+        return ret;
 }
 
 /**
@@ -2355,6 +2407,10 @@ static unsigned int ic4_tx_empty(struct uart_port *the_port)
  */
 static void ic4_stop_tx(struct uart_port *the_port)
 {
+        struct ioc4_port *port = get_ioc4_port(the_port, 0);
+
+        if (port_is_active(port, the_port))
+                set_notification(port, N_OUTPUT_LOWAT, 0);
 }
 
 /**
@@ -2377,11 +2433,12 @@ static void ic4_shutdown(struct uart_port *the_port)
         struct ioc4_port *port;
         struct uart_info *info;
 
-        port = get_ioc4_port(the_port);
+        port = get_ioc4_port(the_port, 0);
         if (!port)
                 return;
 
         info = the_port->info;
+        port->ip_port = NULL;
 
         wake_up_interruptible(&info->delta_msr_wait);
 
@@ -2390,6 +2447,7 @@ static void ic4_shutdown(struct uart_port *the_port)
 
         spin_lock_irqsave(&the_port->lock, port_flags);
         set_notification(port, N_ALL, 0);
+        port->ip_flags = PORT_INACTIVE;
         spin_unlock_irqrestore(&the_port->lock, port_flags);
 }
 
@@ -2402,6 +2460,11 @@ static void ic4_shutdown(struct uart_port *the_port)
 static void ic4_set_mctrl(struct uart_port *the_port, unsigned int mctrl)
 {
         unsigned char mcr = 0;
+        struct ioc4_port *port;
+
+        port = get_ioc4_port(the_port, 0);
+        if (!port_is_active(port, the_port))
+                return;
 
         if (mctrl & TIOCM_RTS)
                 mcr |= UART_MCR_RTS;
@@ -2414,7 +2477,7 @@ static void ic4_set_mctrl(struct uart_port *the_port, unsigned int mctrl)
         if (mctrl & TIOCM_LOOP)
                 mcr |= UART_MCR_LOOP;
 
-        set_mcr(the_port, 1, mcr, IOC4_SHADOW_DTR);
+        set_mcr(the_port, mcr, IOC4_SHADOW_DTR);
 }
 
 /**
@@ -2424,11 +2487,11 @@ static void ic4_set_mctrl(struct uart_port *the_port, unsigned int mctrl)
  */
 static unsigned int ic4_get_mctrl(struct uart_port *the_port)
 {
-        struct ioc4_port *port = get_ioc4_port(the_port);
+        struct ioc4_port *port = get_ioc4_port(the_port, 0);
         uint32_t shadow;
         unsigned int ret = 0;
 
-        if (!port)
+        if (!port_is_active(port, the_port))
                 return 0;
 
         shadow = readl(&port->ip_serial_regs->shadow);
@@ -2448,9 +2511,9 @@ static unsigned int ic4_get_mctrl(struct uart_port *the_port)
  */
 static void ic4_start_tx(struct uart_port *the_port)
 {
-        struct ioc4_port *port = get_ioc4_port(the_port);
+        struct ioc4_port *port = get_ioc4_port(the_port, 0);
 
-        if (port) {
+        if (port_is_active(port, the_port)) {
                 set_notification(port, N_OUTPUT_LOWAT, 1);
                 enable_intrs(port, port->ip_hooks->intr_tx_mt);
         }
@@ -2467,7 +2530,7 @@ static void ic4_break_ctl(struct uart_port *the_port, int break_state)
 }
 
 /**
- * ic4_startup - Start up the serial port - always return 0 (We're always on)
+ * ic4_startup - Start up the serial port
  * @port: Port to operate on
  *
  */
@@ -2479,17 +2542,16 @@ static int ic4_startup(struct uart_port *the_port)
         struct uart_info *info;
         unsigned long port_flags;
 
-        if (!the_port) {
+        if (!the_port)
                 return -ENODEV;
-        }
-        port = get_ioc4_port(the_port);
-        if (!port) {
+        port = get_ioc4_port(the_port, 1);
+        if (!port)
                 return -ENODEV;
-        }
         info = the_port->info;
 
         control = port->ip_control;
         if (!control) {
+                port->ip_port = NULL;
                 return -ENODEV;
         }
 
@@ -2551,28 +2613,104 @@ static struct uart_ops ioc4_ops = {
  * Boot-time initialization code
  */
 
-static struct uart_driver ioc4_uart = {
+static struct uart_driver ioc4_uart_rs232 = {
         .owner          = THIS_MODULE,
-        .driver_name    = "ioc4_serial",
-        .dev_name       = DEVICE_NAME,
+        .driver_name    = "ioc4_serial_rs232",
+        .dev_name       = DEVICE_NAME_RS232,
         .major          = DEVICE_MAJOR,
-        .minor          = DEVICE_MINOR,
+        .minor          = DEVICE_MINOR_RS232,
         .nr             = IOC4_NUM_CARDS * IOC4_NUM_SERIAL_PORTS,
 };
 
+static struct uart_driver ioc4_uart_rs422 = {
+        .owner          = THIS_MODULE,
+        .driver_name    = "ioc4_serial_rs422",
+        .dev_name       = DEVICE_NAME_RS422,
+        .major          = DEVICE_MAJOR,
+        .minor          = DEVICE_MINOR_RS422,
+        .nr             = IOC4_NUM_CARDS * IOC4_NUM_SERIAL_PORTS,
+};
+
+
 /**
- * ioc4_serial_core_attach - register with serial core
+ * ioc4_serial_remove_one - detach function
+ *
+ * @idd: IOC4 master module data for this IOC4
+ */
+
+static int ioc4_serial_remove_one(struct ioc4_driver_data *idd)
+{
+        int port_num, port_type;
+        struct ioc4_control *control;
+        struct uart_port *the_port;
+        struct ioc4_port *port;
+        struct ioc4_soft *soft;
+
+        control = idd->idd_serial_data;
+
+        for (port_num = 0; port_num < IOC4_NUM_SERIAL_PORTS; port_num++) {
+                for (port_type = UART_PORT_MIN;
+                                        port_type < UART_PORT_COUNT;
+                                        port_type++) {
+                        the_port = &control->ic_port[port_num].icp_uart_port
+                                                        [port_type];
+                        if (the_port) {
+                                switch (port_type) {
+                                case UART_PORT_RS422:
+                                        uart_remove_one_port(&ioc4_uart_rs422,
+                                                        the_port);
+                                        break;
+                                default:
+                                case UART_PORT_RS232:
+                                        uart_remove_one_port(&ioc4_uart_rs232,
+                                                        the_port);
+                                        break;
+                                }
+                        }
+                }
+                port = control->ic_port[port_num].icp_port;
+                /* we allocate in pairs */
+                if (!(port_num & 1) && port) {
+                        pci_free_consistent(port->ip_pdev,
+                                        TOTAL_RING_BUF_SIZE,
+                                        port->ip_cpu_ringbuf,
+                                        port->ip_dma_ringbuf);
+                        kfree(port);
+                }
+        }
+        soft = control->ic_soft;
+        if (soft) {
+                free_irq(control->ic_irq, soft);
+                if (soft->is_ioc4_serial_addr) {
+                        release_region((unsigned long)
+                             soft->is_ioc4_serial_addr,
+                                sizeof(struct ioc4_serial));
+                }
+                kfree(soft);
+        }
+        kfree(control);
+        idd->idd_serial_data = NULL;
+
+        return 0;
+}
+
+
+/**
+ * ioc4_serial_core_attach_rs232 - register with serial core
  *              This is done during pci probing
  * @pdev: handle for this card
  */
 static inline int
-ioc4_serial_core_attach(struct pci_dev *pdev)
+ioc4_serial_core_attach(struct pci_dev *pdev, int port_type)
 {
         struct ioc4_port *port;
         struct uart_port *the_port;
         struct ioc4_driver_data *idd = pci_get_drvdata(pdev);
         struct ioc4_control *control = idd->idd_serial_data;
-        int ii;
+        int port_num;
+        int port_type_idx;
+        struct uart_driver *u_driver;
+
 
         DPRINT_CONFIG(("%s: attach pdev 0x%p - control 0x%p\n",
                         __FUNCTION__, pdev, (void *)control));
@@ -2580,28 +2718,36 @@ ioc4_serial_core_attach(struct pci_dev *pdev)
         if (!control)
                 return -ENODEV;
 
+        port_type_idx = (port_type == PROTO_RS232) ? UART_PORT_RS232
+                                                : UART_PORT_RS422;
+
+        u_driver = (port_type == PROTO_RS232)   ? &ioc4_uart_rs232
+                                                : &ioc4_uart_rs422;
+
         /* once around for each port on this card */
-        for (ii = 0; ii < IOC4_NUM_SERIAL_PORTS; ii++) {
-                the_port = &control->ic_port[ii].icp_uart_port;
-                port = control->ic_port[ii].icp_port;
-                port->ip_port = the_port;
+        for (port_num = 0; port_num < IOC4_NUM_SERIAL_PORTS; port_num++) {
+                the_port = &control->ic_port[port_num].icp_uart_port
+                                                        [port_type_idx];
+                port = control->ic_port[port_num].icp_port;
+                port->ip_all_ports[port_type_idx] = the_port;
 
-                DPRINT_CONFIG(("%s: attach the_port 0x%p / port 0x%p\n",
+                DPRINT_CONFIG(("%s: attach the_port 0x%p / port 0x%p : type %s\n",
                                 __FUNCTION__, (void *)the_port,
-                                (void *)port));
+                                (void *)port,
+                                port_type == PROTO_RS232 ? "rs232" : "rs422"));
 
                 /* membase, iobase and mapbase just need to be non-0 */
                 the_port->membase = (unsigned char __iomem *)1;
-                the_port->iobase = (pdev->bus->number << 16) |  ii;
-                the_port->line = (Num_of_ioc4_cards << 2) | ii;
-                the_port->mapbase = 1;
+                the_port->iobase = (pdev->bus->number << 16) |  port_num;
+                the_port->line = (Num_of_ioc4_cards << 2) | port_num;
+                the_port->mapbase = port_type;
                 the_port->type = PORT_16550A;
                 the_port->fifosize = IOC4_FIFO_CHARS;
                 the_port->ops = &ioc4_ops;
                 the_port->irq = control->ic_irq;
                 the_port->dev = &pdev->dev;
                 spin_lock_init(&the_port->lock);
-                if (uart_add_one_port(&ioc4_uart, the_port) < 0) {
+                if (uart_add_one_port(u_driver, the_port) < 0) {
                         printk(KERN_WARNING
                            "%s: unable to add port %d bus %d\n",
                                __FUNCTION__, the_port->line, pdev->bus->number);
@@ -2610,8 +2756,6 @@ ioc4_serial_core_attach(struct pci_dev *pdev)
                             ("IOC4 serial port %d irq = %d, bus %d\n",
                                the_port->line, the_port->irq, pdev->bus->number));
                 }
-                /* all ports are rs232 for now */
-                ioc4_set_proto(port, PROTO_RS232);
         }
         return 0;
 }
@@ -2631,7 +2775,8 @@ ioc4_serial_attach_one(struct ioc4_driver_data *idd)
         int ret = 0;
 
 
-        DPRINT_CONFIG(("%s (0x%p, 0x%p)\n", __FUNCTION__, idd->idd_pdev, idd->idd_pci_id));
+        DPRINT_CONFIG(("%s (0x%p, 0x%p)\n", __FUNCTION__, idd->idd_pdev,
+                                                        idd->idd_pci_id));
 
         /* request serial registers */
         tmp_addr1 = idd->idd_bar0 + IOC4_SERIAL_OFFSET;
@@ -2653,11 +2798,11 @@ ioc4_serial_attach_one(struct ioc4_driver_data *idd)
                 goto out2;
         }
         DPRINT_CONFIG(("%s : mem 0x%p, serial 0x%p\n",
-                                __FUNCTION__, (void *)idd->idd_misc_regs, (void *)serial));
+                                __FUNCTION__, (void *)idd->idd_misc_regs,
+                                (void *)serial));
 
         /* Get memory for the new card */
-        control = kmalloc(sizeof(struct ioc4_control) * IOC4_NUM_SERIAL_PORTS,
-                                                GFP_KERNEL);
+        control = kmalloc(sizeof(struct ioc4_control), GFP_KERNEL);
 
         if (!control) {
                 printk(KERN_WARNING "ioc4_attach_one"
@@ -2702,7 +2847,7 @@ ioc4_serial_attach_one(struct ioc4_driver_data *idd)
 
         /* Hook up interrupt handler */
         if (!request_irq(idd->idd_pdev->irq, ioc4_intr, SA_SHIRQ,
-                                "sgi-ioc4serial", (void *)soft)) {
+                                "sgi-ioc4serial", soft)) {
                 control->ic_irq = idd->idd_pdev->irq;
         } else {
                 printk(KERN_WARNING
@@ -2713,16 +2858,21 @@ ioc4_serial_attach_one(struct ioc4_driver_data *idd)
         if (ret)
                 goto out4;
 
-        /* register port with the serial core */
+        /* register port with the serial core - 1 rs232, 1 rs422 */
 
-        if ((ret = ioc4_serial_core_attach(idd->idd_pdev)))
+        if ((ret = ioc4_serial_core_attach(idd->idd_pdev, PROTO_RS232)))
                 goto out4;
 
+        if ((ret = ioc4_serial_core_attach(idd->idd_pdev, PROTO_RS422)))
+                goto out5;
+
         Num_of_ioc4_cards++;
 
         return ret;
 
         /* error exits that give back resources */
+out5:
+        ioc4_serial_remove_one(idd);
 out4:
         kfree(soft);
 out3:
@@ -2735,52 +2885,6 @@ out1:
 }
 
 
-/**
- * ioc4_serial_remove_one - detach function
- *
- * @idd: IOC4 master module data for this IOC4
- */
-
-int ioc4_serial_remove_one(struct ioc4_driver_data *idd)
-{
-        int ii;
-        struct ioc4_control *control;
-        struct uart_port *the_port;
-        struct ioc4_port *port;
-        struct ioc4_soft *soft;
-
-        control = idd->idd_serial_data;
-
-        for (ii = 0; ii < IOC4_NUM_SERIAL_PORTS; ii++) {
-                the_port = &control->ic_port[ii].icp_uart_port;
-                if (the_port) {
-                        uart_remove_one_port(&ioc4_uart, the_port);
-                }
-                port = control->ic_port[ii].icp_port;
-                if (!(ii & 1) && port) {
-                        pci_free_consistent(port->ip_pdev,
-                                        TOTAL_RING_BUF_SIZE,
-                                        (void *)port->ip_cpu_ringbuf,
-                                        port->ip_dma_ringbuf);
-                        kfree(port);
-                }
-        }
-        soft = control->ic_soft;
-        if (soft) {
-                free_irq(control->ic_irq, (void *)soft);
-                if (soft->is_ioc4_serial_addr) {
-                        release_region((unsigned long)
-                             soft->is_ioc4_serial_addr,
-                                sizeof(struct ioc4_serial));
-                }
-                kfree(soft);
-        }
-        kfree(control);
-        idd->idd_serial_data = NULL;
-
-        return 0;
-}
-
 static struct ioc4_submodule ioc4_serial_submodule = {
         .is_name = "IOC4_serial",
         .is_owner = THIS_MODULE,
@@ -2796,9 +2900,15 @@ int ioc4_serial_init(void)
         int ret;
 
         /* register with serial core */
-        if ((ret = uart_register_driver(&ioc4_uart)) < 0) {
+        if ((ret = uart_register_driver(&ioc4_uart_rs232)) < 0) {
+                printk(KERN_WARNING
+                        "%s: Couldn't register rs232 IOC4 serial driver\n",
+                        __FUNCTION__);
+                return ret;
+        }
+        if ((ret = uart_register_driver(&ioc4_uart_rs422)) < 0) {
                 printk(KERN_WARNING
-                        "%s: Couldn't register IOC4 serial driver\n",
+                        "%s: Couldn't register rs422 IOC4 serial driver\n",
                         __FUNCTION__);
                 return ret;
         }
@@ -2810,7 +2920,8 @@ int ioc4_serial_init(void)
 static void __devexit ioc4_serial_exit(void)
 {
         ioc4_unregister_submodule(&ioc4_serial_submodule);
-        uart_unregister_driver(&ioc4_uart);
+        uart_unregister_driver(&ioc4_uart_rs232);
+        uart_unregister_driver(&ioc4_uart_rs422);
 }
 
 module_init(ioc4_serial_init);