1 files changed, 137 insertions, 0 deletions
diff --git a/drivers/serial/crisv10.h b/drivers/serial/crisv10.h
new file mode 100644
index 000000000000..1800c0e7531a
--- /dev/null
+++ b/drivers/serial/crisv10.h
@@ -0,0 +1,137 @@
+/*
+ * serial.h: Arch-dep definitions for the Etrax100 serial driver.
+ *
+ * Copyright (C) 1998, 1999, 2000 Axis Communications AB
+ */
+#ifndef _ETRAX_SERIAL_H
+#define _ETRAX_SERIAL_H
+#include <linux/config.h>
+#include <linux/circ_buf.h>
+#include <asm/termios.h>
+/* Software state per channel */
+#ifdef __KERNEL__
+/*
+ * This is our internal structure for each serial port's state.
+ *
+ * Many fields are paralleled by the structure used by the serial_struct
+ * structure.
+ *
+ * For definitions of the flags field, see tty.h
+ */
+#define SERIAL_RECV_DESCRIPTORS 8
+struct etrax_recv_buffer {
+        struct etrax_recv_buffer *next;
+        unsigned short length;
+        unsigned char error;
+        unsigned char pad;
+        unsigned char buffer[0];
+};
+struct e100_serial {
+        int                     baud;
+        volatile u8             *port; /* R_SERIALx_CTRL */
+        u32                     irq;  /* bitnr in R_IRQ_MASK2 for dmaX_descr */
+        /* Output registers */
+        volatile u8             *oclrintradr; /* adr to R_DMA_CHx_CLR_INTR */
+        volatile u32            *ofirstadr;   /* adr to R_DMA_CHx_FIRST */
+        volatile u8             *ocmdadr;     /* adr to R_DMA_CHx_CMD */
+        const volatile u8       *ostatusadr;  /* adr to R_DMA_CHx_STATUS */
+        /* Input registers */
+        volatile u8             *iclrintradr; /* adr to R_DMA_CHx_CLR_INTR */
+        volatile u32            *ifirstadr;   /* adr to R_DMA_CHx_FIRST */
+        volatile u8             *icmdadr;     /* adr to R_DMA_CHx_CMD */
+        volatile u32            *idescradr;   /* adr to R_DMA_CHx_DESCR */
+        int                     flags;  /* defined in tty.h */
+        u8                      rx_ctrl; /* shadow for R_SERIALx_REC_CTRL */
+        u8                      tx_ctrl; /* shadow for R_SERIALx_TR_CTRL */
+        u8                      iseteop; /* bit number for R_SET_EOP for the input dma */
+        int                     enabled; /* Set to 1 if the port is enabled in HW config */
+        u8              dma_out_enabled:1; /* Set to 1 if DMA should be used */
+        u8              dma_in_enabled:1;  /* Set to 1 if DMA should be used */
+        /* end of fields defined in rs_table[] in .c-file */
+        u8              uses_dma_in;  /* Set to 1 if DMA is used */
+        u8              uses_dma_out; /* Set to 1 if DMA is used */
+        u8              forced_eop;   /* a fifo eop has been forced */
+        int                     baud_base;     /* For special baudrates */
+        int                     custom_divisor; /* For special baudrates */
+        struct etrax_dma_descr  tr_descr;
+        struct etrax_dma_descr  rec_descr[SERIAL_RECV_DESCRIPTORS];
+        int                     cur_rec_descr;
+        volatile int            tr_running; /* 1 if output is running */
+        struct tty_struct       *tty;
+        int                     read_status_mask;
+        int                     ignore_status_mask;
+        int                     x_char; /* xon/xoff character */
+        int                     close_delay;
+        unsigned short          closing_wait;
+        unsigned short          closing_wait2;
+        unsigned long           event;
+        unsigned long           last_active;
+        int                     line;
+        int                     type;  /* PORT_ETRAX */
+        int                     count;      /* # of fd on device */
+        int                     blocked_open; /* # of blocked opens */
+        struct circ_buf         xmit;
+        struct etrax_recv_buffer *first_recv_buffer;
+        struct etrax_recv_buffer *last_recv_buffer;
+        unsigned int            recv_cnt;
+        unsigned int            max_recv_cnt;
+        struct work_struct      work;
+        struct async_icount     icount;   /* error-statistics etc.*/
+        struct termios          normal_termios;
+        struct termios          callout_termios;
+#ifdef DECLARE_WAITQUEUE
+        wait_queue_head_t       open_wait;
+        wait_queue_head_t       close_wait;
+#else
+        struct wait_queue       *open_wait;
+        struct wait_queue       *close_wait;
+#endif
+        unsigned long           char_time_usec;       /* The time for 1 char, in usecs */
+        unsigned long           flush_time_usec;      /* How often we should flush */
+        unsigned long           last_tx_active_usec;  /* Last tx usec in the jiffies */
+        unsigned long           last_tx_active;       /* Last tx time in jiffies */
+        unsigned long           last_rx_active_usec;  /* Last rx usec in the jiffies */
+        unsigned long           last_rx_active;       /* Last rx time in jiffies */
+        int                     break_detected_cnt;
+        int                     errorcode;
+#ifdef CONFIG_ETRAX_RS485
+        struct rs485_control    rs485;  /* RS-485 support */
+#endif
+};
+/* this PORT is not in the standard serial.h. it's not actually used for
+ * anything since we only have one type of async serial-port anyway in this
+ * system.
+ */
+#define PORT_ETRAX 1
+/*
+ * Events are used to schedule things to happen at timer-interrupt
+ * time, instead of at rs interrupt time.
+ */
+#define RS_EVENT_WRITE_WAKEUP   0
+#endif /* __KERNEL__ */
+#endif /* !_ETRAX_SERIAL_H */

diff --git a/drivers/serial/crisv10.h b/drivers/serial/crisv10.h new file mode 100644 index 000000000000..1800c0e7531a --- /dev/null +++ b/drivers/serial/crisv10.h
@@ -0,0 +1,137 @@
	1	/*
	2	* serial.h: Arch-dep definitions for the Etrax100 serial driver.
	3	*
	4	* Copyright (C) 1998, 1999, 2000 Axis Communications AB
	5	*/
	6
	7	#ifndef _ETRAX_SERIAL_H
	8	#define _ETRAX_SERIAL_H
	9
	10	#include <linux/config.h>
	11	#include <linux/circ_buf.h>
	12	#include <asm/termios.h>
	13
	14	/* Software state per channel */
	15
	16	#ifdef __KERNEL__
	17	/*
	18	* This is our internal structure for each serial port's state.
	19	*
	20	* Many fields are paralleled by the structure used by the serial_struct
	21	* structure.
	22	*
	23	* For definitions of the flags field, see tty.h
	24	*/
	25
	26	#define SERIAL_RECV_DESCRIPTORS 8
	27
	28	struct etrax_recv_buffer {
	29	struct etrax_recv_buffer *next;
	30	unsigned short length;
	31	unsigned char error;
	32	unsigned char pad;
	33
	34	unsigned char buffer[0];
	35	};
	36
	37	struct e100_serial {
	38	int baud;
	39	volatile u8 port; / R_SERIALx_CTRL */
	40	u32 irq; /* bitnr in R_IRQ_MASK2 for dmaX_descr */
	41
	42	/* Output registers */
	43	volatile u8 oclrintradr; / adr to R_DMA_CHx_CLR_INTR */
	44	volatile u32 ofirstadr; / adr to R_DMA_CHx_FIRST */
	45	volatile u8 ocmdadr; / adr to R_DMA_CHx_CMD */
	46	const volatile u8 ostatusadr; / adr to R_DMA_CHx_STATUS */
	47
	48	/* Input registers */
	49	volatile u8 iclrintradr; / adr to R_DMA_CHx_CLR_INTR */
	50	volatile u32 ifirstadr; / adr to R_DMA_CHx_FIRST */
	51	volatile u8 icmdadr; / adr to R_DMA_CHx_CMD */
	52	volatile u32 idescradr; / adr to R_DMA_CHx_DESCR */
	53
	54	int flags; /* defined in tty.h */
	55
	56	u8 rx_ctrl; /* shadow for R_SERIALx_REC_CTRL */
	57	u8 tx_ctrl; /* shadow for R_SERIALx_TR_CTRL */
	58	u8 iseteop; /* bit number for R_SET_EOP for the input dma */
	59	int enabled; /* Set to 1 if the port is enabled in HW config */
	60
	61	u8 dma_out_enabled:1; /* Set to 1 if DMA should be used */
	62	u8 dma_in_enabled:1; /* Set to 1 if DMA should be used */
	63
	64	/* end of fields defined in rs_table[] in .c-file */
	65	u8 uses_dma_in; /* Set to 1 if DMA is used */
	66	u8 uses_dma_out; /* Set to 1 if DMA is used */
	67	u8 forced_eop; /* a fifo eop has been forced */
	68	int baud_base; /* For special baudrates */
	69	int custom_divisor; /* For special baudrates */
	70	struct etrax_dma_descr tr_descr;
	71	struct etrax_dma_descr rec_descr[SERIAL_RECV_DESCRIPTORS];
	72	int cur_rec_descr;
	73
	74	volatile int tr_running; /* 1 if output is running */
	75
	76	struct tty_struct *tty;
	77	int read_status_mask;
	78	int ignore_status_mask;
	79	int x_char; /* xon/xoff character */
	80	int close_delay;
	81	unsigned short closing_wait;
	82	unsigned short closing_wait2;
	83	unsigned long event;
	84	unsigned long last_active;
	85	int line;
	86	int type; /* PORT_ETRAX */
	87	int count; /* # of fd on device */
	88	int blocked_open; /* # of blocked opens */
	89	struct circ_buf xmit;
	90	struct etrax_recv_buffer *first_recv_buffer;
	91	struct etrax_recv_buffer *last_recv_buffer;
	92	unsigned int recv_cnt;
	93	unsigned int max_recv_cnt;
	94
	95	struct work_struct work;
	96	struct async_icount icount; /* error-statistics etc.*/
	97	struct termios normal_termios;
	98	struct termios callout_termios;
	99	#ifdef DECLARE_WAITQUEUE
	100	wait_queue_head_t open_wait;
	101	wait_queue_head_t close_wait;
	102	#else
	103	struct wait_queue *open_wait;
	104	struct wait_queue *close_wait;
	105	#endif
	106
	107	unsigned long char_time_usec; /* The time for 1 char, in usecs */
	108	unsigned long flush_time_usec; /* How often we should flush */
	109	unsigned long last_tx_active_usec; /* Last tx usec in the jiffies */
	110	unsigned long last_tx_active; /* Last tx time in jiffies */
	111	unsigned long last_rx_active_usec; /* Last rx usec in the jiffies */
	112	unsigned long last_rx_active; /* Last rx time in jiffies */
	113
	114	int break_detected_cnt;
	115	int errorcode;
	116
	117	#ifdef CONFIG_ETRAX_RS485
	118	struct rs485_control rs485; /* RS-485 support */
	119	#endif
	120	};
	121
	122	/* this PORT is not in the standard serial.h. it's not actually used for
	123	* anything since we only have one type of async serial-port anyway in this
	124	* system.
	125	*/
	126
	127	#define PORT_ETRAX 1
	128
	129	/*
	130	* Events are used to schedule things to happen at timer-interrupt
	131	* time, instead of at rs interrupt time.
	132	*/
	133	#define RS_EVENT_WRITE_WAKEUP 0
	134
	135	#endif /* __KERNEL__ */
	136
	137	#endif /* !_ETRAX_SERIAL_H */