1 files changed, 58 insertions, 21 deletions

diff --git a/drivers/serial/crisv10.c b/drivers/serial/crisv10.c
index e642c22c80e2..7ba7d70f04d6 100644
--- a/drivers/serial/crisv10.c
+++ b/drivers/serial/crisv10.c
@@ -1391,7 +1391,7 @@ static inline void e100_disable_rx_irq(struct e100_serial *info)
 #if defined(CONFIG_ETRAX_RS485)
 /* Enable RS-485 mode on selected port. This is UGLY. */
 static int
-e100_enable_rs485(struct tty_struct *tty,struct rs485_control *r)
+e100_enable_rs485(struct tty_struct *tty, struct serial_rs485 *r)
 {
         struct e100_serial * info = (struct e100_serial *)tty->driver_data;
 
@@ -1409,13 +1409,11 @@ e100_enable_rs485(struct tty_struct *tty,struct rs485_control *r)
                        CONFIG_ETRAX_RS485_LTC1387_RXEN_PORT_G_BIT, 1);
 #endif
 
-        info->rs485.rts_on_send = 0x01 & r->rts_on_send;
-        info->rs485.rts_after_sent = 0x01 & r->rts_after_sent;
+        info->rs485.flags = r->flags;
         if (r->delay_rts_before_send >= 1000)
                 info->rs485.delay_rts_before_send = 1000;
         else
                 info->rs485.delay_rts_before_send = r->delay_rts_before_send;
-        info->rs485.enabled = r->enabled;
 /*      printk("rts: on send = %i, after = %i, enabled = %i",
                     info->rs485.rts_on_send,
                     info->rs485.rts_after_sent,
@@ -1430,17 +1428,18 @@ e100_write_rs485(struct tty_struct *tty,
                  const unsigned char *buf, int count)
 {
         struct e100_serial * info = (struct e100_serial *)tty->driver_data;
-        int old_enabled = info->rs485.enabled;
+        int old_value = (info->rs485.flags) & SER_RS485_ENABLED;
 
         /* rs485 is always implicitly enabled if we're using the ioctl()
-         * but it doesn't have to be set in the rs485_control
+         * but it doesn't have to be set in the serial_rs485
          * (to be backward compatible with old apps)
          * So we store, set and restore it.
          */
-        info->rs485.enabled = 1;
+        info->rs485.flags |= SER_RS485_ENABLED;
         /* rs_write now deals with RS485 if enabled */
         count = rs_write(tty, buf, count);
-        info->rs485.enabled = old_enabled;
+        if (!old_value)
+                info->rs485.flags &= ~(SER_RS485_ENABLED);
         return count;
 }
 
@@ -1451,7 +1450,7 @@ static void rs485_toggle_rts_timer_function(unsigned long data)
         struct e100_serial *info = (struct e100_serial *)data;
 
         fast_timers_rs485[info->line].function = NULL;
-        e100_rts(info, info->rs485.rts_after_sent);
+        e100_rts(info, (info->rs485.flags & SER_RS485_RTS_AFTER_SEND));
 #if defined(CONFIG_ETRAX_RS485_DISABLE_RECEIVER)
         e100_enable_rx(info);
         e100_enable_rx_irq(info);
@@ -1647,7 +1646,7 @@ transmit_chars_dma(struct e100_serial *info)
                 info->tr_running = 0;
 
 #if defined(CONFIG_ETRAX_RS485) && defined(CONFIG_ETRAX_FAST_TIMER)
-                if (info->rs485.enabled) {
+                if (info->rs485.flags & SER_RS485_ENABLED) {
                         /* Set a short timer to toggle RTS */
                         start_one_shot_timer(&fast_timers_rs485[info->line],
                                              rs485_toggle_rts_timer_function,
@@ -2577,7 +2576,7 @@ static void handle_ser_tx_interrupt(struct e100_serial *info)
         info->icount.tx++;
         if (info->xmit.head == info->xmit.tail) {
 #if defined(CONFIG_ETRAX_RS485) && defined(CONFIG_ETRAX_FAST_TIMER)
-                if (info->rs485.enabled) {
+                if (info->rs485.flags & SER_RS485_ENABLED) {
                         /* Set a short timer to toggle RTS */
                         start_one_shot_timer(&fast_timers_rs485[info->line],
                                              rs485_toggle_rts_timer_function,
@@ -3218,7 +3217,7 @@ rs_write(struct tty_struct *tty,
 #if defined(CONFIG_ETRAX_RS485)
         struct e100_serial *info = (struct e100_serial *)tty->driver_data;
 
-        if (info->rs485.enabled)
+        if (info->rs485.flags & SER_RS485_ENABLED)
         {
                 /* If we are in RS-485 mode, we need to toggle RTS and disable
                  * the receiver before initiating a DMA transfer
@@ -3228,7 +3227,7 @@ rs_write(struct tty_struct *tty,
                 fast_timers_rs485[info->line].function = NULL;
                 del_fast_timer(&fast_timers_rs485[info->line]);
 #endif
-                e100_rts(info, info->rs485.rts_on_send);
+                e100_rts(info, (info->rs485.flags & SER_RS485_RTS_ON_SEND));
 #if defined(CONFIG_ETRAX_RS485_DISABLE_RECEIVER)
                 e100_disable_rx(info);
                 e100_enable_rx_irq(info);
@@ -3242,7 +3241,7 @@ rs_write(struct tty_struct *tty,
         count = rs_raw_write(tty, buf, count);
 
 #if defined(CONFIG_ETRAX_RS485)
-        if (info->rs485.enabled)
+        if (info->rs485.flags & SER_RS485_ENABLED)
         {
                 unsigned int val;
                 /* If we are in RS-485 mode the following has to be done:
@@ -3263,7 +3262,7 @@ rs_write(struct tty_struct *tty,
                         get_lsr_info(info, &val);
                 }while (!(val & TIOCSER_TEMT));
 
-                e100_rts(info, info->rs485.rts_after_sent);
+                e100_rts(info, (info->rs485.flags & SER_RS485_RTS_AFTER_SEND));
 
 #if defined(CONFIG_ETRAX_RS485_DISABLE_RECEIVER)
                 e100_enable_rx(info);
@@ -3678,14 +3677,52 @@ rs_ioctl(struct tty_struct *tty, struct file * file,
 #if defined(CONFIG_ETRAX_RS485)
         case TIOCSERSETRS485:
         {
+                /* In this ioctl we still use the old structure
+                 * rs485_control for backward compatibility
+                 * (if we use serial_rs485, then old user-level code
+                 * wouldn't work anymore...).
+                 * The use of this ioctl is deprecated: use TIOCSRS485
+                 * instead.*/
                 struct rs485_control rs485ctrl;
+                struct serial_rs485 rs485data;
+                printk(KERN_DEBUG "The use of this ioctl is deprecated. Use TIOCSRS485 instead\n");
                 if (copy_from_user(&rs485ctrl, (struct rs485_control *)arg,
                                 sizeof(rs485ctrl)))
                         return -EFAULT;
 
-                return e100_enable_rs485(tty, &rs485ctrl);
+                rs485data.delay_rts_before_send = rs485ctrl.delay_rts_before_send;
+                rs485data.flags = 0;
+                if (rs485ctrl.enabled)
+                        rs485data.flags |= SER_RS485_ENABLED;
+                else
+                        rs485data.flags &= ~(SER_RS485_ENABLED);
+
+                if (rs485ctrl.rts_on_send)
+                        rs485data.flags |= SER_RS485_RTS_ON_SEND;
+                else
+                        rs485data.flags &= ~(SER_RS485_RTS_ON_SEND);
+
+                if (rs485ctrl.rts_after_sent)
+                        rs485data.flags |= SER_RS485_RTS_AFTER_SEND;
+                else
+                        rs485data.flags &= ~(SER_RS485_RTS_AFTER_SEND);
+
+                return e100_enable_rs485(tty, &rs485data);
         }
 
+        case TIOCSRS485:
+        {
+                /* This is the new version of TIOCSRS485, with new
+                 * data structure serial_rs485 */
+                struct serial_rs485 rs485data;
+                if (copy_from_user(&rs485data, (struct rs485_control *)arg,
+                                sizeof(rs485data)))
+                        return -EFAULT;
+
+                return e100_enable_rs485(tty, &rs485data);
+        }
+
+
         case TIOCSERWRRS485:
         {
                 struct rs485_write rs485wr;
@@ -3827,8 +3864,8 @@ rs_close(struct tty_struct *tty, struct file * filp)
         /* port closed */
 
 #if defined(CONFIG_ETRAX_RS485)
-        if (info->rs485.enabled) {
-                info->rs485.enabled = 0;
+        if (info->rs485.flags & SER_RS485_ENABLED) {
+                info->rs485.flags &= ~(SER_RS485_ENABLED);
 #if defined(CONFIG_ETRAX_RS485_ON_PA)
                 *R_PORT_PA_DATA = port_pa_data_shadow &= ~(1 << rs485_pa_bit);
 #endif
@@ -4493,10 +4530,10 @@ rs_init(void)
 
 #if defined(CONFIG_ETRAX_RS485)
                 /* Set sane defaults */
-                info->rs485.rts_on_send = 0;
-                info->rs485.rts_after_sent = 1;
+                info->rs485.flags &= ~(SER_RS485_RTS_ON_SEND);
+                info->rs485.flags |= SER_RS485_RTS_AFTER_SEND;
                 info->rs485.delay_rts_before_send = 0;
-                info->rs485.enabled = 0;
+                info->rs485.flags &= ~(SER_RS485_ENABLED);
 #endif
                 INIT_WORK(&info->work, do_softint);