diff options
Diffstat (limited to 'drivers/serial/atmel_serial.h')
| -rw-r--r-- | drivers/serial/atmel_serial.h | 123 |
1 files changed, 123 insertions, 0 deletions
diff --git a/drivers/serial/atmel_serial.h b/drivers/serial/atmel_serial.h new file mode 100644 index 000000000000..d38b24a53375 --- /dev/null +++ b/drivers/serial/atmel_serial.h | |||
| @@ -0,0 +1,123 @@ | |||
| 1 | /* | ||
| 2 | * drivers/serial/atmel_serial.h | ||
| 3 | * | ||
| 4 | * Copyright (C) 2005 Ivan Kokshaysky | ||
| 5 | * Copyright (C) SAN People | ||
| 6 | * | ||
| 7 | * USART registers. | ||
| 8 | * Based on AT91RM9200 datasheet revision E. | ||
| 9 | * | ||
| 10 | * This program is free software; you can redistribute it and/or modify | ||
| 11 | * it under the terms of the GNU General Public License as published by | ||
| 12 | * the Free Software Foundation; either version 2 of the License, or | ||
| 13 | * (at your option) any later version. | ||
| 14 | */ | ||
| 15 | |||
| 16 | #ifndef AT91RM9200_USART_H | ||
| 17 | #define AT91RM9200_USART_H | ||
| 18 | |||
| 19 | #define AT91_US_CR 0x00 /* Control Register */ | ||
| 20 | #define AT91_US_RSTRX (1 << 2) /* Reset Receiver */ | ||
| 21 | #define AT91_US_RSTTX (1 << 3) /* Reset Transmitter */ | ||
| 22 | #define AT91_US_RXEN (1 << 4) /* Receiver Enable */ | ||
| 23 | #define AT91_US_RXDIS (1 << 5) /* Receiver Disable */ | ||
| 24 | #define AT91_US_TXEN (1 << 6) /* Transmitter Enable */ | ||
| 25 | #define AT91_US_TXDIS (1 << 7) /* Transmitter Disable */ | ||
| 26 | #define AT91_US_RSTSTA (1 << 8) /* Reset Status Bits */ | ||
| 27 | #define AT91_US_STTBRK (1 << 9) /* Start Break */ | ||
| 28 | #define AT91_US_STPBRK (1 << 10) /* Stop Break */ | ||
| 29 | #define AT91_US_STTTO (1 << 11) /* Start Time-out */ | ||
| 30 | #define AT91_US_SENDA (1 << 12) /* Send Address */ | ||
| 31 | #define AT91_US_RSTIT (1 << 13) /* Reset Iterations */ | ||
| 32 | #define AT91_US_RSTNACK (1 << 14) /* Reset Non Acknowledge */ | ||
| 33 | #define AT91_US_RETTO (1 << 15) /* Rearm Time-out */ | ||
| 34 | #define AT91_US_DTREN (1 << 16) /* Data Terminal Ready Enable */ | ||
| 35 | #define AT91_US_DTRDIS (1 << 17) /* Data Terminal Ready Disable */ | ||
| 36 | #define AT91_US_RTSEN (1 << 18) /* Request To Send Enable */ | ||
| 37 | #define AT91_US_RTSDIS (1 << 19) /* Request To Send Disable */ | ||
| 38 | |||
| 39 | #define AT91_US_MR 0x04 /* Mode Register */ | ||
| 40 | #define AT91_US_USMODE (0xf << 0) /* Mode of the USART */ | ||
| 41 | #define AT91_US_USMODE_NORMAL 0 | ||
| 42 | #define AT91_US_USMODE_RS485 1 | ||
| 43 | #define AT91_US_USMODE_HWHS 2 | ||
| 44 | #define AT91_US_USMODE_MODEM 3 | ||
| 45 | #define AT91_US_USMODE_ISO7816_T0 4 | ||
| 46 | #define AT91_US_USMODE_ISO7816_T1 6 | ||
| 47 | #define AT91_US_USMODE_IRDA 8 | ||
| 48 | #define AT91_US_USCLKS (3 << 4) /* Clock Selection */ | ||
| 49 | #define AT91_US_CHRL (3 << 6) /* Character Length */ | ||
| 50 | #define AT91_US_CHRL_5 (0 << 6) | ||
| 51 | #define AT91_US_CHRL_6 (1 << 6) | ||
| 52 | #define AT91_US_CHRL_7 (2 << 6) | ||
| 53 | #define AT91_US_CHRL_8 (3 << 6) | ||
| 54 | #define AT91_US_SYNC (1 << 8) /* Synchronous Mode Select */ | ||
| 55 | #define AT91_US_PAR (7 << 9) /* Parity Type */ | ||
| 56 | #define AT91_US_PAR_EVEN (0 << 9) | ||
| 57 | #define AT91_US_PAR_ODD (1 << 9) | ||
| 58 | #define AT91_US_PAR_SPACE (2 << 9) | ||
| 59 | #define AT91_US_PAR_MARK (3 << 9) | ||
| 60 | #define AT91_US_PAR_NONE (4 << 9) | ||
| 61 | #define AT91_US_PAR_MULTI_DROP (6 << 9) | ||
| 62 | #define AT91_US_NBSTOP (3 << 12) /* Number of Stop Bits */ | ||
| 63 | #define AT91_US_NBSTOP_1 (0 << 12) | ||
| 64 | #define AT91_US_NBSTOP_1_5 (1 << 12) | ||
| 65 | #define AT91_US_NBSTOP_2 (2 << 12) | ||
| 66 | #define AT91_US_CHMODE (3 << 14) /* Channel Mode */ | ||
| 67 | #define AT91_US_CHMODE_NORMAL (0 << 14) | ||
| 68 | #define AT91_US_CHMODE_ECHO (1 << 14) | ||
| 69 | #define AT91_US_CHMODE_LOC_LOOP (2 << 14) | ||
| 70 | #define AT91_US_CHMODE_REM_LOOP (3 << 14) | ||
| 71 | #define AT91_US_MSBF (1 << 16) /* Bit Order */ | ||
| 72 | #define AT91_US_MODE9 (1 << 17) /* 9-bit Character Length */ | ||
| 73 | #define AT91_US_CLKO (1 << 18) /* Clock Output Select */ | ||
| 74 | #define AT91_US_OVER (1 << 19) /* Oversampling Mode */ | ||
| 75 | #define AT91_US_INACK (1 << 20) /* Inhibit Non Acknowledge */ | ||
| 76 | #define AT91_US_DSNACK (1 << 21) /* Disable Successive NACK */ | ||
| 77 | #define AT91_US_MAX_ITER (7 << 24) /* Max Iterations */ | ||
| 78 | #define AT91_US_FILTER (1 << 28) /* Infrared Receive Line Filter */ | ||
| 79 | |||
| 80 | #define AT91_US_IER 0x08 /* Interrupt Enable Register */ | ||
| 81 | #define AT91_US_RXRDY (1 << 0) /* Receiver Ready */ | ||
| 82 | #define AT91_US_TXRDY (1 << 1) /* Transmitter Ready */ | ||
| 83 | #define AT91_US_RXBRK (1 << 2) /* Break Received / End of Break */ | ||
| 84 | #define AT91_US_ENDRX (1 << 3) /* End of Receiver Transfer */ | ||
| 85 | #define AT91_US_ENDTX (1 << 4) /* End of Transmitter Transfer */ | ||
| 86 | #define AT91_US_OVRE (1 << 5) /* Overrun Error */ | ||
| 87 | #define AT91_US_FRAME (1 << 6) /* Framing Error */ | ||
| 88 | #define AT91_US_PARE (1 << 7) /* Parity Error */ | ||
| 89 | #define AT91_US_TIMEOUT (1 << 8) /* Receiver Time-out */ | ||
| 90 | #define AT91_US_TXEMPTY (1 << 9) /* Transmitter Empty */ | ||
| 91 | #define AT91_US_ITERATION (1 << 10) /* Max number of Repetitions Reached */ | ||
| 92 | #define AT91_US_TXBUFE (1 << 11) /* Transmission Buffer Empty */ | ||
| 93 | #define AT91_US_RXBUFF (1 << 12) /* Reception Buffer Full */ | ||
| 94 | #define AT91_US_NACK (1 << 13) /* Non Acknowledge */ | ||
| 95 | #define AT91_US_RIIC (1 << 16) /* Ring Indicator Input Change */ | ||
| 96 | #define AT91_US_DSRIC (1 << 17) /* Data Set Ready Input Change */ | ||
| 97 | #define AT91_US_DCDIC (1 << 18) /* Data Carrier Detect Input Change */ | ||
| 98 | #define AT91_US_CTSIC (1 << 19) /* Clear to Send Input Change */ | ||
| 99 | #define AT91_US_RI (1 << 20) /* RI */ | ||
| 100 | #define AT91_US_DSR (1 << 21) /* DSR */ | ||
| 101 | #define AT91_US_DCD (1 << 22) /* DCD */ | ||
| 102 | #define AT91_US_CTS (1 << 23) /* CTS */ | ||
| 103 | |||
| 104 | #define AT91_US_IDR 0x0c /* Interrupt Disable Register */ | ||
| 105 | #define AT91_US_IMR 0x10 /* Interrupt Mask Register */ | ||
| 106 | #define AT91_US_CSR 0x14 /* Channel Status Register */ | ||
| 107 | #define AT91_US_RHR 0x18 /* Receiver Holding Register */ | ||
| 108 | #define AT91_US_THR 0x1c /* Transmitter Holding Register */ | ||
| 109 | |||
| 110 | #define AT91_US_BRGR 0x20 /* Baud Rate Generator Register */ | ||
| 111 | #define AT91_US_CD (0xffff << 0) /* Clock Divider */ | ||
| 112 | |||
| 113 | #define AT91_US_RTOR 0x24 /* Receiver Time-out Register */ | ||
| 114 | #define AT91_US_TO (0xffff << 0) /* Time-out Value */ | ||
| 115 | |||
| 116 | #define AT91_US_TTGR 0x28 /* Transmitter Timeguard Register */ | ||
| 117 | #define AT91_US_TG (0xff << 0) /* Timeguard Value */ | ||
| 118 | |||
| 119 | #define AT91_US_FIDI 0x40 /* FI DI Ratio Register */ | ||
| 120 | #define AT91_US_NER 0x44 /* Number of Errors Register */ | ||
| 121 | #define AT91_US_IF 0x4c /* IrDA Filter Register */ | ||
| 122 | |||
| 123 | #endif | ||