aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/serial/8250_pci.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/serial/8250_pci.c')
-rw-r--r--drivers/serial/8250_pci.c2303
1 files changed, 2303 insertions, 0 deletions
diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c
new file mode 100644
index 000000000000..f8d90d0ecfea
--- /dev/null
+++ b/drivers/serial/8250_pci.c
@@ -0,0 +1,2303 @@
1/*
2 * linux/drivers/char/8250_pci.c
3 *
4 * Probe module for 8250/16550-type PCI serial ports.
5 *
6 * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
7 *
8 * Copyright (C) 2001 Russell King, All Rights Reserved.
9 *
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License as published by
12 * the Free Software Foundation; either version 2 of the License.
13 *
14 * $Id: 8250_pci.c,v 1.28 2002/11/02 11:14:18 rmk Exp $
15 */
16#include <linux/module.h>
17#include <linux/init.h>
18#include <linux/pci.h>
19#include <linux/sched.h>
20#include <linux/string.h>
21#include <linux/kernel.h>
22#include <linux/slab.h>
23#include <linux/delay.h>
24#include <linux/tty.h>
25#include <linux/serial_core.h>
26#include <linux/8250_pci.h>
27#include <linux/bitops.h>
28
29#include <asm/byteorder.h>
30#include <asm/io.h>
31
32#include "8250.h"
33
34#undef SERIAL_DEBUG_PCI
35
36/*
37 * Definitions for PCI support.
38 */
39#define FL_BASE_MASK 0x0007
40#define FL_BASE0 0x0000
41#define FL_BASE1 0x0001
42#define FL_BASE2 0x0002
43#define FL_BASE3 0x0003
44#define FL_BASE4 0x0004
45#define FL_GET_BASE(x) (x & FL_BASE_MASK)
46
47/* Use successive BARs (PCI base address registers),
48 else use offset into some specified BAR */
49#define FL_BASE_BARS 0x0008
50
51/* do not assign an irq */
52#define FL_NOIRQ 0x0080
53
54/* Use the Base address register size to cap number of ports */
55#define FL_REGION_SZ_CAP 0x0100
56
57struct pci_board {
58 unsigned int flags;
59 unsigned int num_ports;
60 unsigned int base_baud;
61 unsigned int uart_offset;
62 unsigned int reg_shift;
63 unsigned int first_offset;
64};
65
66/*
67 * init function returns:
68 * > 0 - number of ports
69 * = 0 - use board->num_ports
70 * < 0 - error
71 */
72struct pci_serial_quirk {
73 u32 vendor;
74 u32 device;
75 u32 subvendor;
76 u32 subdevice;
77 int (*init)(struct pci_dev *dev);
78 int (*setup)(struct pci_dev *dev, struct pci_board *board,
79 struct uart_port *port, int idx);
80 void (*exit)(struct pci_dev *dev);
81};
82
83#define PCI_NUM_BAR_RESOURCES 6
84
85struct serial_private {
86 unsigned int nr;
87 void __iomem *remapped_bar[PCI_NUM_BAR_RESOURCES];
88 struct pci_serial_quirk *quirk;
89 int line[0];
90};
91
92static void moan_device(const char *str, struct pci_dev *dev)
93{
94 printk(KERN_WARNING "%s: %s\n"
95 KERN_WARNING "Please send the output of lspci -vv, this\n"
96 KERN_WARNING "message (0x%04x,0x%04x,0x%04x,0x%04x), the\n"
97 KERN_WARNING "manufacturer and name of serial board or\n"
98 KERN_WARNING "modem board to rmk+serial@arm.linux.org.uk.\n",
99 pci_name(dev), str, dev->vendor, dev->device,
100 dev->subsystem_vendor, dev->subsystem_device);
101}
102
103static int
104setup_port(struct pci_dev *dev, struct uart_port *port,
105 int bar, int offset, int regshift)
106{
107 struct serial_private *priv = pci_get_drvdata(dev);
108 unsigned long base, len;
109
110 if (bar >= PCI_NUM_BAR_RESOURCES)
111 return -EINVAL;
112
113 if (pci_resource_flags(dev, bar) & IORESOURCE_MEM) {
114 base = pci_resource_start(dev, bar);
115 len = pci_resource_len(dev, bar);
116
117 if (!priv->remapped_bar[bar])
118 priv->remapped_bar[bar] = ioremap(base, len);
119 if (!priv->remapped_bar[bar])
120 return -ENOMEM;
121
122 port->iotype = UPIO_MEM;
123 port->mapbase = base + offset;
124 port->membase = priv->remapped_bar[bar] + offset;
125 port->regshift = regshift;
126 } else {
127 base = pci_resource_start(dev, bar) + offset;
128 port->iotype = UPIO_PORT;
129 port->iobase = base;
130 }
131 return 0;
132}
133
134/*
135 * AFAVLAB uses a different mixture of BARs and offsets
136 * Not that ugly ;) -- HW
137 */
138static int
139afavlab_setup(struct pci_dev *dev, struct pci_board *board,
140 struct uart_port *port, int idx)
141{
142 unsigned int bar, offset = board->first_offset;
143
144 bar = FL_GET_BASE(board->flags);
145 if (idx < 4)
146 bar += idx;
147 else {
148 bar = 4;
149 offset += (idx - 4) * board->uart_offset;
150 }
151
152 return setup_port(dev, port, bar, offset, board->reg_shift);
153}
154
155/*
156 * HP's Remote Management Console. The Diva chip came in several
157 * different versions. N-class, L2000 and A500 have two Diva chips, each
158 * with 3 UARTs (the third UART on the second chip is unused). Superdome
159 * and Keystone have one Diva chip with 3 UARTs. Some later machines have
160 * one Diva chip, but it has been expanded to 5 UARTs.
161 */
162static int __devinit pci_hp_diva_init(struct pci_dev *dev)
163{
164 int rc = 0;
165
166 switch (dev->subsystem_device) {
167 case PCI_DEVICE_ID_HP_DIVA_TOSCA1:
168 case PCI_DEVICE_ID_HP_DIVA_HALFDOME:
169 case PCI_DEVICE_ID_HP_DIVA_KEYSTONE:
170 case PCI_DEVICE_ID_HP_DIVA_EVEREST:
171 rc = 3;
172 break;
173 case PCI_DEVICE_ID_HP_DIVA_TOSCA2:
174 rc = 2;
175 break;
176 case PCI_DEVICE_ID_HP_DIVA_MAESTRO:
177 rc = 4;
178 break;
179 case PCI_DEVICE_ID_HP_DIVA_POWERBAR:
180 rc = 1;
181 break;
182 }
183
184 return rc;
185}
186
187/*
188 * HP's Diva chip puts the 4th/5th serial port further out, and
189 * some serial ports are supposed to be hidden on certain models.
190 */
191static int
192pci_hp_diva_setup(struct pci_dev *dev, struct pci_board *board,
193 struct uart_port *port, int idx)
194{
195 unsigned int offset = board->first_offset;
196 unsigned int bar = FL_GET_BASE(board->flags);
197
198 switch (dev->subsystem_device) {
199 case PCI_DEVICE_ID_HP_DIVA_MAESTRO:
200 if (idx == 3)
201 idx++;
202 break;
203 case PCI_DEVICE_ID_HP_DIVA_EVEREST:
204 if (idx > 0)
205 idx++;
206 if (idx > 2)
207 idx++;
208 break;
209 }
210 if (idx > 2)
211 offset = 0x18;
212
213 offset += idx * board->uart_offset;
214
215 return setup_port(dev, port, bar, offset, board->reg_shift);
216}
217
218/*
219 * Added for EKF Intel i960 serial boards
220 */
221static int __devinit pci_inteli960ni_init(struct pci_dev *dev)
222{
223 unsigned long oldval;
224
225 if (!(dev->subsystem_device & 0x1000))
226 return -ENODEV;
227
228 /* is firmware started? */
229 pci_read_config_dword(dev, 0x44, (void*) &oldval);
230 if (oldval == 0x00001000L) { /* RESET value */
231 printk(KERN_DEBUG "Local i960 firmware missing");
232 return -ENODEV;
233 }
234 return 0;
235}
236
237/*
238 * Some PCI serial cards using the PLX 9050 PCI interface chip require
239 * that the card interrupt be explicitly enabled or disabled. This
240 * seems to be mainly needed on card using the PLX which also use I/O
241 * mapped memory.
242 */
243static int __devinit pci_plx9050_init(struct pci_dev *dev)
244{
245 u8 irq_config;
246 void __iomem *p;
247
248 if ((pci_resource_flags(dev, 0) & IORESOURCE_MEM) == 0) {
249 moan_device("no memory in bar 0", dev);
250 return 0;
251 }
252
253 irq_config = 0x41;
254 if (dev->vendor == PCI_VENDOR_ID_PANACOM)
255 irq_config = 0x43;
256 if ((dev->vendor == PCI_VENDOR_ID_PLX) &&
257 (dev->device == PCI_DEVICE_ID_PLX_ROMULUS)) {
258 /*
259 * As the megawolf cards have the int pins active
260 * high, and have 2 UART chips, both ints must be
261 * enabled on the 9050. Also, the UARTS are set in
262 * 16450 mode by default, so we have to enable the
263 * 16C950 'enhanced' mode so that we can use the
264 * deep FIFOs
265 */
266 irq_config = 0x5b;
267 }
268
269 /*
270 * enable/disable interrupts
271 */
272 p = ioremap(pci_resource_start(dev, 0), 0x80);
273 if (p == NULL)
274 return -ENOMEM;
275 writel(irq_config, p + 0x4c);
276
277 /*
278 * Read the register back to ensure that it took effect.
279 */
280 readl(p + 0x4c);
281 iounmap(p);
282
283 return 0;
284}
285
286static void __devexit pci_plx9050_exit(struct pci_dev *dev)
287{
288 u8 __iomem *p;
289
290 if ((pci_resource_flags(dev, 0) & IORESOURCE_MEM) == 0)
291 return;
292
293 /*
294 * disable interrupts
295 */
296 p = ioremap(pci_resource_start(dev, 0), 0x80);
297 if (p != NULL) {
298 writel(0, p + 0x4c);
299
300 /*
301 * Read the register back to ensure that it took effect.
302 */
303 readl(p + 0x4c);
304 iounmap(p);
305 }
306}
307
308/* SBS Technologies Inc. PMC-OCTPRO and P-OCTAL cards */
309static int
310sbs_setup(struct pci_dev *dev, struct pci_board *board,
311 struct uart_port *port, int idx)
312{
313 unsigned int bar, offset = board->first_offset;
314
315 bar = 0;
316
317 if (idx < 4) {
318 /* first four channels map to 0, 0x100, 0x200, 0x300 */
319 offset += idx * board->uart_offset;
320 } else if (idx < 8) {
321 /* last four channels map to 0x1000, 0x1100, 0x1200, 0x1300 */
322 offset += idx * board->uart_offset + 0xC00;
323 } else /* we have only 8 ports on PMC-OCTALPRO */
324 return 1;
325
326 return setup_port(dev, port, bar, offset, board->reg_shift);
327}
328
329/*
330* This does initialization for PMC OCTALPRO cards:
331* maps the device memory, resets the UARTs (needed, bc
332* if the module is removed and inserted again, the card
333* is in the sleep mode) and enables global interrupt.
334*/
335
336/* global control register offset for SBS PMC-OctalPro */
337#define OCT_REG_CR_OFF 0x500
338
339static int __devinit sbs_init(struct pci_dev *dev)
340{
341 u8 __iomem *p;
342
343 p = ioremap(pci_resource_start(dev, 0),pci_resource_len(dev,0));
344
345 if (p == NULL)
346 return -ENOMEM;
347 /* Set bit-4 Control Register (UART RESET) in to reset the uarts */
348 writeb(0x10,p + OCT_REG_CR_OFF);
349 udelay(50);
350 writeb(0x0,p + OCT_REG_CR_OFF);
351
352 /* Set bit-2 (INTENABLE) of Control Register */
353 writeb(0x4, p + OCT_REG_CR_OFF);
354 iounmap(p);
355
356 return 0;
357}
358
359/*
360 * Disables the global interrupt of PMC-OctalPro
361 */
362
363static void __devexit sbs_exit(struct pci_dev *dev)
364{
365 u8 __iomem *p;
366
367 p = ioremap(pci_resource_start(dev, 0),pci_resource_len(dev,0));
368 if (p != NULL) {
369 writeb(0, p + OCT_REG_CR_OFF);
370 }
371 iounmap(p);
372}
373
374/*
375 * SIIG serial cards have an PCI interface chip which also controls
376 * the UART clocking frequency. Each UART can be clocked independently
377 * (except cards equiped with 4 UARTs) and initial clocking settings
378 * are stored in the EEPROM chip. It can cause problems because this
379 * version of serial driver doesn't support differently clocked UART's
380 * on single PCI card. To prevent this, initialization functions set
381 * high frequency clocking for all UART's on given card. It is safe (I
382 * hope) because it doesn't touch EEPROM settings to prevent conflicts
383 * with other OSes (like M$ DOS).
384 *
385 * SIIG support added by Andrey Panin <pazke@donpac.ru>, 10/1999
386 *
387 * There is two family of SIIG serial cards with different PCI
388 * interface chip and different configuration methods:
389 * - 10x cards have control registers in IO and/or memory space;
390 * - 20x cards have control registers in standard PCI configuration space.
391 *
392 * Note: some SIIG cards are probed by the parport_serial object.
393 */
394
395#define PCI_DEVICE_ID_SIIG_1S_10x (PCI_DEVICE_ID_SIIG_1S_10x_550 & 0xfffc)
396#define PCI_DEVICE_ID_SIIG_2S_10x (PCI_DEVICE_ID_SIIG_2S_10x_550 & 0xfff8)
397
398static int pci_siig10x_init(struct pci_dev *dev)
399{
400 u16 data;
401 void __iomem *p;
402
403 switch (dev->device & 0xfff8) {
404 case PCI_DEVICE_ID_SIIG_1S_10x: /* 1S */
405 data = 0xffdf;
406 break;
407 case PCI_DEVICE_ID_SIIG_2S_10x: /* 2S, 2S1P */
408 data = 0xf7ff;
409 break;
410 default: /* 1S1P, 4S */
411 data = 0xfffb;
412 break;
413 }
414
415 p = ioremap(pci_resource_start(dev, 0), 0x80);
416 if (p == NULL)
417 return -ENOMEM;
418
419 writew(readw(p + 0x28) & data, p + 0x28);
420 readw(p + 0x28);
421 iounmap(p);
422 return 0;
423}
424
425#define PCI_DEVICE_ID_SIIG_2S_20x (PCI_DEVICE_ID_SIIG_2S_20x_550 & 0xfffc)
426#define PCI_DEVICE_ID_SIIG_2S1P_20x (PCI_DEVICE_ID_SIIG_2S1P_20x_550 & 0xfffc)
427
428static int pci_siig20x_init(struct pci_dev *dev)
429{
430 u8 data;
431
432 /* Change clock frequency for the first UART. */
433 pci_read_config_byte(dev, 0x6f, &data);
434 pci_write_config_byte(dev, 0x6f, data & 0xef);
435
436 /* If this card has 2 UART, we have to do the same with second UART. */
437 if (((dev->device & 0xfffc) == PCI_DEVICE_ID_SIIG_2S_20x) ||
438 ((dev->device & 0xfffc) == PCI_DEVICE_ID_SIIG_2S1P_20x)) {
439 pci_read_config_byte(dev, 0x73, &data);
440 pci_write_config_byte(dev, 0x73, data & 0xef);
441 }
442 return 0;
443}
444
445int pci_siig10x_fn(struct pci_dev *dev, int enable)
446{
447 int ret = 0;
448 if (enable)
449 ret = pci_siig10x_init(dev);
450 return ret;
451}
452
453int pci_siig20x_fn(struct pci_dev *dev, int enable)
454{
455 int ret = 0;
456 if (enable)
457 ret = pci_siig20x_init(dev);
458 return ret;
459}
460
461EXPORT_SYMBOL(pci_siig10x_fn);
462EXPORT_SYMBOL(pci_siig20x_fn);
463
464/*
465 * Timedia has an explosion of boards, and to avoid the PCI table from
466 * growing *huge*, we use this function to collapse some 70 entries
467 * in the PCI table into one, for sanity's and compactness's sake.
468 */
469static unsigned short timedia_single_port[] = {
470 0x4025, 0x4027, 0x4028, 0x5025, 0x5027, 0
471};
472
473static unsigned short timedia_dual_port[] = {
474 0x0002, 0x4036, 0x4037, 0x4038, 0x4078, 0x4079, 0x4085,
475 0x4088, 0x4089, 0x5037, 0x5078, 0x5079, 0x5085, 0x6079,
476 0x7079, 0x8079, 0x8137, 0x8138, 0x8237, 0x8238, 0x9079,
477 0x9137, 0x9138, 0x9237, 0x9238, 0xA079, 0xB079, 0xC079,
478 0xD079, 0
479};
480
481static unsigned short timedia_quad_port[] = {
482 0x4055, 0x4056, 0x4095, 0x4096, 0x5056, 0x8156, 0x8157,
483 0x8256, 0x8257, 0x9056, 0x9156, 0x9157, 0x9158, 0x9159,
484 0x9256, 0x9257, 0xA056, 0xA157, 0xA158, 0xA159, 0xB056,
485 0xB157, 0
486};
487
488static unsigned short timedia_eight_port[] = {
489 0x4065, 0x4066, 0x5065, 0x5066, 0x8166, 0x9066, 0x9166,
490 0x9167, 0x9168, 0xA066, 0xA167, 0xA168, 0
491};
492
493static struct timedia_struct {
494 int num;
495 unsigned short *ids;
496} timedia_data[] = {
497 { 1, timedia_single_port },
498 { 2, timedia_dual_port },
499 { 4, timedia_quad_port },
500 { 8, timedia_eight_port },
501 { 0, NULL }
502};
503
504static int __devinit pci_timedia_init(struct pci_dev *dev)
505{
506 unsigned short *ids;
507 int i, j;
508
509 for (i = 0; timedia_data[i].num; i++) {
510 ids = timedia_data[i].ids;
511 for (j = 0; ids[j]; j++)
512 if (dev->subsystem_device == ids[j])
513 return timedia_data[i].num;
514 }
515 return 0;
516}
517
518/*
519 * Timedia/SUNIX uses a mixture of BARs and offsets
520 * Ugh, this is ugly as all hell --- TYT
521 */
522static int
523pci_timedia_setup(struct pci_dev *dev, struct pci_board *board,
524 struct uart_port *port, int idx)
525{
526 unsigned int bar = 0, offset = board->first_offset;
527
528 switch (idx) {
529 case 0:
530 bar = 0;
531 break;
532 case 1:
533 offset = board->uart_offset;
534 bar = 0;
535 break;
536 case 2:
537 bar = 1;
538 break;
539 case 3:
540 offset = board->uart_offset;
541 bar = 1;
542 case 4: /* BAR 2 */
543 case 5: /* BAR 3 */
544 case 6: /* BAR 4 */
545 case 7: /* BAR 5 */
546 bar = idx - 2;
547 }
548
549 return setup_port(dev, port, bar, offset, board->reg_shift);
550}
551
552/*
553 * Some Titan cards are also a little weird
554 */
555static int
556titan_400l_800l_setup(struct pci_dev *dev, struct pci_board *board,
557 struct uart_port *port, int idx)
558{
559 unsigned int bar, offset = board->first_offset;
560
561 switch (idx) {
562 case 0:
563 bar = 1;
564 break;
565 case 1:
566 bar = 2;
567 break;
568 default:
569 bar = 4;
570 offset = (idx - 2) * board->uart_offset;
571 }
572
573 return setup_port(dev, port, bar, offset, board->reg_shift);
574}
575
576static int __devinit pci_xircom_init(struct pci_dev *dev)
577{
578 msleep(100);
579 return 0;
580}
581
582static int __devinit pci_netmos_init(struct pci_dev *dev)
583{
584 /* subdevice 0x00PS means <P> parallel, <S> serial */
585 unsigned int num_serial = dev->subsystem_device & 0xf;
586
587 if (num_serial == 0)
588 return -ENODEV;
589 return num_serial;
590}
591
592static int
593pci_default_setup(struct pci_dev *dev, struct pci_board *board,
594 struct uart_port *port, int idx)
595{
596 unsigned int bar, offset = board->first_offset, maxnr;
597
598 bar = FL_GET_BASE(board->flags);
599 if (board->flags & FL_BASE_BARS)
600 bar += idx;
601 else
602 offset += idx * board->uart_offset;
603
604 maxnr = (pci_resource_len(dev, bar) - board->first_offset) /
605 (8 << board->reg_shift);
606
607 if (board->flags & FL_REGION_SZ_CAP && idx >= maxnr)
608 return 1;
609
610 return setup_port(dev, port, bar, offset, board->reg_shift);
611}
612
613/* This should be in linux/pci_ids.h */
614#define PCI_VENDOR_ID_SBSMODULARIO 0x124B
615#define PCI_SUBVENDOR_ID_SBSMODULARIO 0x124B
616#define PCI_DEVICE_ID_OCTPRO 0x0001
617#define PCI_SUBDEVICE_ID_OCTPRO232 0x0108
618#define PCI_SUBDEVICE_ID_OCTPRO422 0x0208
619#define PCI_SUBDEVICE_ID_POCTAL232 0x0308
620#define PCI_SUBDEVICE_ID_POCTAL422 0x0408
621
622/*
623 * Master list of serial port init/setup/exit quirks.
624 * This does not describe the general nature of the port.
625 * (ie, baud base, number and location of ports, etc)
626 *
627 * This list is ordered alphabetically by vendor then device.
628 * Specific entries must come before more generic entries.
629 */
630static struct pci_serial_quirk pci_serial_quirks[] = {
631 /*
632 * AFAVLAB cards.
633 * It is not clear whether this applies to all products.
634 */
635 {
636 .vendor = PCI_VENDOR_ID_AFAVLAB,
637 .device = PCI_ANY_ID,
638 .subvendor = PCI_ANY_ID,
639 .subdevice = PCI_ANY_ID,
640 .setup = afavlab_setup,
641 },
642 /*
643 * HP Diva
644 */
645 {
646 .vendor = PCI_VENDOR_ID_HP,
647 .device = PCI_DEVICE_ID_HP_DIVA,
648 .subvendor = PCI_ANY_ID,
649 .subdevice = PCI_ANY_ID,
650 .init = pci_hp_diva_init,
651 .setup = pci_hp_diva_setup,
652 },
653 /*
654 * Intel
655 */
656 {
657 .vendor = PCI_VENDOR_ID_INTEL,
658 .device = PCI_DEVICE_ID_INTEL_80960_RP,
659 .subvendor = 0xe4bf,
660 .subdevice = PCI_ANY_ID,
661 .init = pci_inteli960ni_init,
662 .setup = pci_default_setup,
663 },
664 /*
665 * Panacom
666 */
667 {
668 .vendor = PCI_VENDOR_ID_PANACOM,
669 .device = PCI_DEVICE_ID_PANACOM_QUADMODEM,
670 .subvendor = PCI_ANY_ID,
671 .subdevice = PCI_ANY_ID,
672 .init = pci_plx9050_init,
673 .setup = pci_default_setup,
674 .exit = __devexit_p(pci_plx9050_exit),
675 },
676 {
677 .vendor = PCI_VENDOR_ID_PANACOM,
678 .device = PCI_DEVICE_ID_PANACOM_DUALMODEM,
679 .subvendor = PCI_ANY_ID,
680 .subdevice = PCI_ANY_ID,
681 .init = pci_plx9050_init,
682 .setup = pci_default_setup,
683 .exit = __devexit_p(pci_plx9050_exit),
684 },
685 /*
686 * PLX
687 */
688 {
689 .vendor = PCI_VENDOR_ID_PLX,
690 .device = PCI_DEVICE_ID_PLX_9050,
691 .subvendor = PCI_SUBVENDOR_ID_KEYSPAN,
692 .subdevice = PCI_SUBDEVICE_ID_KEYSPAN_SX2,
693 .init = pci_plx9050_init,
694 .setup = pci_default_setup,
695 .exit = __devexit_p(pci_plx9050_exit),
696 },
697 {
698 .vendor = PCI_VENDOR_ID_PLX,
699 .device = PCI_DEVICE_ID_PLX_ROMULUS,
700 .subvendor = PCI_VENDOR_ID_PLX,
701 .subdevice = PCI_DEVICE_ID_PLX_ROMULUS,
702 .init = pci_plx9050_init,
703 .setup = pci_default_setup,
704 .exit = __devexit_p(pci_plx9050_exit),
705 },
706 /*
707 * SBS Technologies, Inc., PMC-OCTALPRO 232
708 */
709 {
710 .vendor = PCI_VENDOR_ID_SBSMODULARIO,
711 .device = PCI_DEVICE_ID_OCTPRO,
712 .subvendor = PCI_SUBVENDOR_ID_SBSMODULARIO,
713 .subdevice = PCI_SUBDEVICE_ID_OCTPRO232,
714 .init = sbs_init,
715 .setup = sbs_setup,
716 .exit = __devexit_p(sbs_exit),
717 },
718 /*
719 * SBS Technologies, Inc., PMC-OCTALPRO 422
720 */
721 {
722 .vendor = PCI_VENDOR_ID_SBSMODULARIO,
723 .device = PCI_DEVICE_ID_OCTPRO,
724 .subvendor = PCI_SUBVENDOR_ID_SBSMODULARIO,
725 .subdevice = PCI_SUBDEVICE_ID_OCTPRO422,
726 .init = sbs_init,
727 .setup = sbs_setup,
728 .exit = __devexit_p(sbs_exit),
729 },
730 /*
731 * SBS Technologies, Inc., P-Octal 232
732 */
733 {
734 .vendor = PCI_VENDOR_ID_SBSMODULARIO,
735 .device = PCI_DEVICE_ID_OCTPRO,
736 .subvendor = PCI_SUBVENDOR_ID_SBSMODULARIO,
737 .subdevice = PCI_SUBDEVICE_ID_POCTAL232,
738 .init = sbs_init,
739 .setup = sbs_setup,
740 .exit = __devexit_p(sbs_exit),
741 },
742 /*
743 * SBS Technologies, Inc., P-Octal 422
744 */
745 {
746 .vendor = PCI_VENDOR_ID_SBSMODULARIO,
747 .device = PCI_DEVICE_ID_OCTPRO,
748 .subvendor = PCI_SUBVENDOR_ID_SBSMODULARIO,
749 .subdevice = PCI_SUBDEVICE_ID_POCTAL422,
750 .init = sbs_init,
751 .setup = sbs_setup,
752 .exit = __devexit_p(sbs_exit),
753 },
754
755 /*
756 * SIIG cards.
757 * It is not clear whether these could be collapsed.
758 */
759 {
760 .vendor = PCI_VENDOR_ID_SIIG,
761 .device = PCI_DEVICE_ID_SIIG_1S_10x_550,
762 .subvendor = PCI_ANY_ID,
763 .subdevice = PCI_ANY_ID,
764 .init = pci_siig10x_init,
765 .setup = pci_default_setup,
766 },
767 {
768 .vendor = PCI_VENDOR_ID_SIIG,
769 .device = PCI_DEVICE_ID_SIIG_1S_10x_650,
770 .subvendor = PCI_ANY_ID,
771 .subdevice = PCI_ANY_ID,
772 .init = pci_siig10x_init,
773 .setup = pci_default_setup,
774 },
775 {
776 .vendor = PCI_VENDOR_ID_SIIG,
777 .device = PCI_DEVICE_ID_SIIG_1S_10x_850,
778 .subvendor = PCI_ANY_ID,
779 .subdevice = PCI_ANY_ID,
780 .init = pci_siig10x_init,
781 .setup = pci_default_setup,
782 },
783 {
784 .vendor = PCI_VENDOR_ID_SIIG,
785 .device = PCI_DEVICE_ID_SIIG_2S_10x_550,
786 .subvendor = PCI_ANY_ID,
787 .subdevice = PCI_ANY_ID,
788 .init = pci_siig10x_init,
789 .setup = pci_default_setup,
790 },
791 {
792 .vendor = PCI_VENDOR_ID_SIIG,
793 .device = PCI_DEVICE_ID_SIIG_2S_10x_650,
794 .subvendor = PCI_ANY_ID,
795 .subdevice = PCI_ANY_ID,
796 .init = pci_siig10x_init,
797 .setup = pci_default_setup,
798 },
799 {
800 .vendor = PCI_VENDOR_ID_SIIG,
801 .device = PCI_DEVICE_ID_SIIG_2S_10x_850,
802 .subvendor = PCI_ANY_ID,
803 .subdevice = PCI_ANY_ID,
804 .init = pci_siig10x_init,
805 .setup = pci_default_setup,
806 },
807 {
808 .vendor = PCI_VENDOR_ID_SIIG,
809 .device = PCI_DEVICE_ID_SIIG_4S_10x_550,
810 .subvendor = PCI_ANY_ID,
811 .subdevice = PCI_ANY_ID,
812 .init = pci_siig10x_init,
813 .setup = pci_default_setup,
814 },
815 {
816 .vendor = PCI_VENDOR_ID_SIIG,
817 .device = PCI_DEVICE_ID_SIIG_4S_10x_650,
818 .subvendor = PCI_ANY_ID,
819 .subdevice = PCI_ANY_ID,
820 .init = pci_siig10x_init,
821 .setup = pci_default_setup,
822 },
823 {
824 .vendor = PCI_VENDOR_ID_SIIG,
825 .device = PCI_DEVICE_ID_SIIG_4S_10x_850,
826 .subvendor = PCI_ANY_ID,
827 .subdevice = PCI_ANY_ID,
828 .init = pci_siig10x_init,
829 .setup = pci_default_setup,
830 },
831 {
832 .vendor = PCI_VENDOR_ID_SIIG,
833 .device = PCI_DEVICE_ID_SIIG_1S_20x_550,
834 .subvendor = PCI_ANY_ID,
835 .subdevice = PCI_ANY_ID,
836 .init = pci_siig20x_init,
837 .setup = pci_default_setup,
838 },
839 {
840 .vendor = PCI_VENDOR_ID_SIIG,
841 .device = PCI_DEVICE_ID_SIIG_1S_20x_650,
842 .subvendor = PCI_ANY_ID,
843 .subdevice = PCI_ANY_ID,
844 .init = pci_siig20x_init,
845 .setup = pci_default_setup,
846 },
847 {
848 .vendor = PCI_VENDOR_ID_SIIG,
849 .device = PCI_DEVICE_ID_SIIG_1S_20x_850,
850 .subvendor = PCI_ANY_ID,
851 .subdevice = PCI_ANY_ID,
852 .init = pci_siig20x_init,
853 .setup = pci_default_setup,
854 },
855 {
856 .vendor = PCI_VENDOR_ID_SIIG,
857 .device = PCI_DEVICE_ID_SIIG_2S_20x_550,
858 .subvendor = PCI_ANY_ID,
859 .subdevice = PCI_ANY_ID,
860 .init = pci_siig20x_init,
861 .setup = pci_default_setup,
862 },
863 { .vendor = PCI_VENDOR_ID_SIIG,
864 .device = PCI_DEVICE_ID_SIIG_2S_20x_650,
865 .subvendor = PCI_ANY_ID,
866 .subdevice = PCI_ANY_ID,
867 .init = pci_siig20x_init,
868 .setup = pci_default_setup,
869 },
870 {
871 .vendor = PCI_VENDOR_ID_SIIG,
872 .device = PCI_DEVICE_ID_SIIG_2S_20x_850,
873 .subvendor = PCI_ANY_ID,
874 .subdevice = PCI_ANY_ID,
875 .init = pci_siig20x_init,
876 .setup = pci_default_setup,
877 },
878 {
879 .vendor = PCI_VENDOR_ID_SIIG,
880 .device = PCI_DEVICE_ID_SIIG_4S_20x_550,
881 .subvendor = PCI_ANY_ID,
882 .subdevice = PCI_ANY_ID,
883 .init = pci_siig20x_init,
884 .setup = pci_default_setup,
885 },
886 {
887 .vendor = PCI_VENDOR_ID_SIIG,
888 .device = PCI_DEVICE_ID_SIIG_4S_20x_650,
889 .subvendor = PCI_ANY_ID,
890 .subdevice = PCI_ANY_ID,
891 .init = pci_siig20x_init,
892 .setup = pci_default_setup,
893 },
894 {
895 .vendor = PCI_VENDOR_ID_SIIG,
896 .device = PCI_DEVICE_ID_SIIG_4S_20x_850,
897 .subvendor = PCI_ANY_ID,
898 .subdevice = PCI_ANY_ID,
899 .init = pci_siig20x_init,
900 .setup = pci_default_setup,
901 },
902 /*
903 * Titan cards
904 */
905 {
906 .vendor = PCI_VENDOR_ID_TITAN,
907 .device = PCI_DEVICE_ID_TITAN_400L,
908 .subvendor = PCI_ANY_ID,
909 .subdevice = PCI_ANY_ID,
910 .setup = titan_400l_800l_setup,
911 },
912 {
913 .vendor = PCI_VENDOR_ID_TITAN,
914 .device = PCI_DEVICE_ID_TITAN_800L,
915 .subvendor = PCI_ANY_ID,
916 .subdevice = PCI_ANY_ID,
917 .setup = titan_400l_800l_setup,
918 },
919 /*
920 * Timedia cards
921 */
922 {
923 .vendor = PCI_VENDOR_ID_TIMEDIA,
924 .device = PCI_DEVICE_ID_TIMEDIA_1889,
925 .subvendor = PCI_VENDOR_ID_TIMEDIA,
926 .subdevice = PCI_ANY_ID,
927 .init = pci_timedia_init,
928 .setup = pci_timedia_setup,
929 },
930 {
931 .vendor = PCI_VENDOR_ID_TIMEDIA,
932 .device = PCI_ANY_ID,
933 .subvendor = PCI_ANY_ID,
934 .subdevice = PCI_ANY_ID,
935 .setup = pci_timedia_setup,
936 },
937 /*
938 * Xircom cards
939 */
940 {
941 .vendor = PCI_VENDOR_ID_XIRCOM,
942 .device = PCI_DEVICE_ID_XIRCOM_X3201_MDM,
943 .subvendor = PCI_ANY_ID,
944 .subdevice = PCI_ANY_ID,
945 .init = pci_xircom_init,
946 .setup = pci_default_setup,
947 },
948 /*
949 * Netmos cards
950 */
951 {
952 .vendor = PCI_VENDOR_ID_NETMOS,
953 .device = PCI_ANY_ID,
954 .subvendor = PCI_ANY_ID,
955 .subdevice = PCI_ANY_ID,
956 .init = pci_netmos_init,
957 .setup = pci_default_setup,
958 },
959 /*
960 * Default "match everything" terminator entry
961 */
962 {
963 .vendor = PCI_ANY_ID,
964 .device = PCI_ANY_ID,
965 .subvendor = PCI_ANY_ID,
966 .subdevice = PCI_ANY_ID,
967 .setup = pci_default_setup,
968 }
969};
970
971static inline int quirk_id_matches(u32 quirk_id, u32 dev_id)
972{
973 return quirk_id == PCI_ANY_ID || quirk_id == dev_id;
974}
975
976static struct pci_serial_quirk *find_quirk(struct pci_dev *dev)
977{
978 struct pci_serial_quirk *quirk;
979
980 for (quirk = pci_serial_quirks; ; quirk++)
981 if (quirk_id_matches(quirk->vendor, dev->vendor) &&
982 quirk_id_matches(quirk->device, dev->device) &&
983 quirk_id_matches(quirk->subvendor, dev->subsystem_vendor) &&
984 quirk_id_matches(quirk->subdevice, dev->subsystem_device))
985 break;
986 return quirk;
987}
988
989static _INLINE_ int
990get_pci_irq(struct pci_dev *dev, struct pci_board *board, int idx)
991{
992 if (board->flags & FL_NOIRQ)
993 return 0;
994 else
995 return dev->irq;
996}
997
998/*
999 * This is the configuration table for all of the PCI serial boards
1000 * which we support. It is directly indexed by the pci_board_num_t enum
1001 * value, which is encoded in the pci_device_id PCI probe table's
1002 * driver_data member.
1003 *
1004 * The makeup of these names are:
1005 * pbn_bn{_bt}_n_baud
1006 *
1007 * bn = PCI BAR number
1008 * bt = Index using PCI BARs
1009 * n = number of serial ports
1010 * baud = baud rate
1011 *
1012 * Please note: in theory if n = 1, _bt infix should make no difference.
1013 * ie, pbn_b0_1_115200 is the same as pbn_b0_bt_1_115200
1014 */
1015enum pci_board_num_t {
1016 pbn_default = 0,
1017
1018 pbn_b0_1_115200,
1019 pbn_b0_2_115200,
1020 pbn_b0_4_115200,
1021 pbn_b0_5_115200,
1022
1023 pbn_b0_1_921600,
1024 pbn_b0_2_921600,
1025 pbn_b0_4_921600,
1026
1027 pbn_b0_bt_1_115200,
1028 pbn_b0_bt_2_115200,
1029 pbn_b0_bt_8_115200,
1030
1031 pbn_b0_bt_1_460800,
1032 pbn_b0_bt_2_460800,
1033 pbn_b0_bt_4_460800,
1034
1035 pbn_b0_bt_1_921600,
1036 pbn_b0_bt_2_921600,
1037 pbn_b0_bt_4_921600,
1038 pbn_b0_bt_8_921600,
1039
1040 pbn_b1_1_115200,
1041 pbn_b1_2_115200,
1042 pbn_b1_4_115200,
1043 pbn_b1_8_115200,
1044
1045 pbn_b1_1_921600,
1046 pbn_b1_2_921600,
1047 pbn_b1_4_921600,
1048 pbn_b1_8_921600,
1049
1050 pbn_b1_bt_2_921600,
1051
1052 pbn_b1_1_1382400,
1053 pbn_b1_2_1382400,
1054 pbn_b1_4_1382400,
1055 pbn_b1_8_1382400,
1056
1057 pbn_b2_1_115200,
1058 pbn_b2_8_115200,
1059
1060 pbn_b2_1_460800,
1061 pbn_b2_4_460800,
1062 pbn_b2_8_460800,
1063 pbn_b2_16_460800,
1064
1065 pbn_b2_1_921600,
1066 pbn_b2_4_921600,
1067 pbn_b2_8_921600,
1068
1069 pbn_b2_bt_1_115200,
1070 pbn_b2_bt_2_115200,
1071 pbn_b2_bt_4_115200,
1072
1073 pbn_b2_bt_2_921600,
1074 pbn_b2_bt_4_921600,
1075
1076 pbn_b3_4_115200,
1077 pbn_b3_8_115200,
1078
1079 /*
1080 * Board-specific versions.
1081 */
1082 pbn_panacom,
1083 pbn_panacom2,
1084 pbn_panacom4,
1085 pbn_plx_romulus,
1086 pbn_oxsemi,
1087 pbn_intel_i960,
1088 pbn_sgi_ioc3,
1089 pbn_nec_nile4,
1090 pbn_computone_4,
1091 pbn_computone_6,
1092 pbn_computone_8,
1093 pbn_sbsxrsio,
1094 pbn_exar_XR17C152,
1095 pbn_exar_XR17C154,
1096 pbn_exar_XR17C158,
1097};
1098
1099/*
1100 * uart_offset - the space between channels
1101 * reg_shift - describes how the UART registers are mapped
1102 * to PCI memory by the card.
1103 * For example IER register on SBS, Inc. PMC-OctPro is located at
1104 * offset 0x10 from the UART base, while UART_IER is defined as 1
1105 * in include/linux/serial_reg.h,
1106 * see first lines of serial_in() and serial_out() in 8250.c
1107*/
1108
1109static struct pci_board pci_boards[] __devinitdata = {
1110 [pbn_default] = {
1111 .flags = FL_BASE0,
1112 .num_ports = 1,
1113 .base_baud = 115200,
1114 .uart_offset = 8,
1115 },
1116 [pbn_b0_1_115200] = {
1117 .flags = FL_BASE0,
1118 .num_ports = 1,
1119 .base_baud = 115200,
1120 .uart_offset = 8,
1121 },
1122 [pbn_b0_2_115200] = {
1123 .flags = FL_BASE0,
1124 .num_ports = 2,
1125 .base_baud = 115200,
1126 .uart_offset = 8,
1127 },
1128 [pbn_b0_4_115200] = {
1129 .flags = FL_BASE0,
1130 .num_ports = 4,
1131 .base_baud = 115200,
1132 .uart_offset = 8,
1133 },
1134 [pbn_b0_5_115200] = {
1135 .flags = FL_BASE0,
1136 .num_ports = 5,
1137 .base_baud = 115200,
1138 .uart_offset = 8,
1139 },
1140
1141 [pbn_b0_1_921600] = {
1142 .flags = FL_BASE0,
1143 .num_ports = 1,
1144 .base_baud = 921600,
1145 .uart_offset = 8,
1146 },
1147 [pbn_b0_2_921600] = {
1148 .flags = FL_BASE0,
1149 .num_ports = 2,
1150 .base_baud = 921600,
1151 .uart_offset = 8,
1152 },
1153 [pbn_b0_4_921600] = {
1154 .flags = FL_BASE0,
1155 .num_ports = 4,
1156 .base_baud = 921600,
1157 .uart_offset = 8,
1158 },
1159
1160 [pbn_b0_bt_1_115200] = {
1161 .flags = FL_BASE0|FL_BASE_BARS,
1162 .num_ports = 1,
1163 .base_baud = 115200,
1164 .uart_offset = 8,
1165 },
1166 [pbn_b0_bt_2_115200] = {
1167 .flags = FL_BASE0|FL_BASE_BARS,
1168 .num_ports = 2,
1169 .base_baud = 115200,
1170 .uart_offset = 8,
1171 },
1172 [pbn_b0_bt_8_115200] = {
1173 .flags = FL_BASE0|FL_BASE_BARS,
1174 .num_ports = 8,
1175 .base_baud = 115200,
1176 .uart_offset = 8,
1177 },
1178
1179 [pbn_b0_bt_1_460800] = {
1180 .flags = FL_BASE0|FL_BASE_BARS,
1181 .num_ports = 1,
1182 .base_baud = 460800,
1183 .uart_offset = 8,
1184 },
1185 [pbn_b0_bt_2_460800] = {
1186 .flags = FL_BASE0|FL_BASE_BARS,
1187 .num_ports = 2,
1188 .base_baud = 460800,
1189 .uart_offset = 8,
1190 },
1191 [pbn_b0_bt_4_460800] = {
1192 .flags = FL_BASE0|FL_BASE_BARS,
1193 .num_ports = 4,
1194 .base_baud = 460800,
1195 .uart_offset = 8,
1196 },
1197
1198 [pbn_b0_bt_1_921600] = {
1199 .flags = FL_BASE0|FL_BASE_BARS,
1200 .num_ports = 1,
1201 .base_baud = 921600,
1202 .uart_offset = 8,
1203 },
1204 [pbn_b0_bt_2_921600] = {
1205 .flags = FL_BASE0|FL_BASE_BARS,
1206 .num_ports = 2,
1207 .base_baud = 921600,
1208 .uart_offset = 8,
1209 },
1210 [pbn_b0_bt_4_921600] = {
1211 .flags = FL_BASE0|FL_BASE_BARS,
1212 .num_ports = 4,
1213 .base_baud = 921600,
1214 .uart_offset = 8,
1215 },
1216 [pbn_b0_bt_8_921600] = {
1217 .flags = FL_BASE0|FL_BASE_BARS,
1218 .num_ports = 8,
1219 .base_baud = 921600,
1220 .uart_offset = 8,
1221 },
1222
1223 [pbn_b1_1_115200] = {
1224 .flags = FL_BASE1,
1225 .num_ports = 1,
1226 .base_baud = 115200,
1227 .uart_offset = 8,
1228 },
1229 [pbn_b1_2_115200] = {
1230 .flags = FL_BASE1,
1231 .num_ports = 2,
1232 .base_baud = 115200,
1233 .uart_offset = 8,
1234 },
1235 [pbn_b1_4_115200] = {
1236 .flags = FL_BASE1,
1237 .num_ports = 4,
1238 .base_baud = 115200,
1239 .uart_offset = 8,
1240 },
1241 [pbn_b1_8_115200] = {
1242 .flags = FL_BASE1,
1243 .num_ports = 8,
1244 .base_baud = 115200,
1245 .uart_offset = 8,
1246 },
1247
1248 [pbn_b1_1_921600] = {
1249 .flags = FL_BASE1,
1250 .num_ports = 1,
1251 .base_baud = 921600,
1252 .uart_offset = 8,
1253 },
1254 [pbn_b1_2_921600] = {
1255 .flags = FL_BASE1,
1256 .num_ports = 2,
1257 .base_baud = 921600,
1258 .uart_offset = 8,
1259 },
1260 [pbn_b1_4_921600] = {
1261 .flags = FL_BASE1,
1262 .num_ports = 4,
1263 .base_baud = 921600,
1264 .uart_offset = 8,
1265 },
1266 [pbn_b1_8_921600] = {
1267 .flags = FL_BASE1,
1268 .num_ports = 8,
1269 .base_baud = 921600,
1270 .uart_offset = 8,
1271 },
1272
1273 [pbn_b1_bt_2_921600] = {
1274 .flags = FL_BASE1|FL_BASE_BARS,
1275 .num_ports = 2,
1276 .base_baud = 921600,
1277 .uart_offset = 8,
1278 },
1279
1280 [pbn_b1_1_1382400] = {
1281 .flags = FL_BASE1,
1282 .num_ports = 1,
1283 .base_baud = 1382400,
1284 .uart_offset = 8,
1285 },
1286 [pbn_b1_2_1382400] = {
1287 .flags = FL_BASE1,
1288 .num_ports = 2,
1289 .base_baud = 1382400,
1290 .uart_offset = 8,
1291 },
1292 [pbn_b1_4_1382400] = {
1293 .flags = FL_BASE1,
1294 .num_ports = 4,
1295 .base_baud = 1382400,
1296 .uart_offset = 8,
1297 },
1298 [pbn_b1_8_1382400] = {
1299 .flags = FL_BASE1,
1300 .num_ports = 8,
1301 .base_baud = 1382400,
1302 .uart_offset = 8,
1303 },
1304
1305 [pbn_b2_1_115200] = {
1306 .flags = FL_BASE2,
1307 .num_ports = 1,
1308 .base_baud = 115200,
1309 .uart_offset = 8,
1310 },
1311 [pbn_b2_8_115200] = {
1312 .flags = FL_BASE2,
1313 .num_ports = 8,
1314 .base_baud = 115200,
1315 .uart_offset = 8,
1316 },
1317
1318 [pbn_b2_1_460800] = {
1319 .flags = FL_BASE2,
1320 .num_ports = 1,
1321 .base_baud = 460800,
1322 .uart_offset = 8,
1323 },
1324 [pbn_b2_4_460800] = {
1325 .flags = FL_BASE2,
1326 .num_ports = 4,
1327 .base_baud = 460800,
1328 .uart_offset = 8,
1329 },
1330 [pbn_b2_8_460800] = {
1331 .flags = FL_BASE2,
1332 .num_ports = 8,
1333 .base_baud = 460800,
1334 .uart_offset = 8,
1335 },
1336 [pbn_b2_16_460800] = {
1337 .flags = FL_BASE2,
1338 .num_ports = 16,
1339 .base_baud = 460800,
1340 .uart_offset = 8,
1341 },
1342
1343 [pbn_b2_1_921600] = {
1344 .flags = FL_BASE2,
1345 .num_ports = 1,
1346 .base_baud = 921600,
1347 .uart_offset = 8,
1348 },
1349 [pbn_b2_4_921600] = {
1350 .flags = FL_BASE2,
1351 .num_ports = 4,
1352 .base_baud = 921600,
1353 .uart_offset = 8,
1354 },
1355 [pbn_b2_8_921600] = {
1356 .flags = FL_BASE2,
1357 .num_ports = 8,
1358 .base_baud = 921600,
1359 .uart_offset = 8,
1360 },
1361
1362 [pbn_b2_bt_1_115200] = {
1363 .flags = FL_BASE2|FL_BASE_BARS,
1364 .num_ports = 1,
1365 .base_baud = 115200,
1366 .uart_offset = 8,
1367 },
1368 [pbn_b2_bt_2_115200] = {
1369 .flags = FL_BASE2|FL_BASE_BARS,
1370 .num_ports = 2,
1371 .base_baud = 115200,
1372 .uart_offset = 8,
1373 },
1374 [pbn_b2_bt_4_115200] = {
1375 .flags = FL_BASE2|FL_BASE_BARS,
1376 .num_ports = 4,
1377 .base_baud = 115200,
1378 .uart_offset = 8,
1379 },
1380
1381 [pbn_b2_bt_2_921600] = {
1382 .flags = FL_BASE2|FL_BASE_BARS,
1383 .num_ports = 2,
1384 .base_baud = 921600,
1385 .uart_offset = 8,
1386 },
1387 [pbn_b2_bt_4_921600] = {
1388 .flags = FL_BASE2|FL_BASE_BARS,
1389 .num_ports = 4,
1390 .base_baud = 921600,
1391 .uart_offset = 8,
1392 },
1393
1394 [pbn_b3_4_115200] = {
1395 .flags = FL_BASE3,
1396 .num_ports = 4,
1397 .base_baud = 115200,
1398 .uart_offset = 8,
1399 },
1400 [pbn_b3_8_115200] = {
1401 .flags = FL_BASE3,
1402 .num_ports = 8,
1403 .base_baud = 115200,
1404 .uart_offset = 8,
1405 },
1406
1407 /*
1408 * Entries following this are board-specific.
1409 */
1410
1411 /*
1412 * Panacom - IOMEM
1413 */
1414 [pbn_panacom] = {
1415 .flags = FL_BASE2,
1416 .num_ports = 2,
1417 .base_baud = 921600,
1418 .uart_offset = 0x400,
1419 .reg_shift = 7,
1420 },
1421 [pbn_panacom2] = {
1422 .flags = FL_BASE2|FL_BASE_BARS,
1423 .num_ports = 2,
1424 .base_baud = 921600,
1425 .uart_offset = 0x400,
1426 .reg_shift = 7,
1427 },
1428 [pbn_panacom4] = {
1429 .flags = FL_BASE2|FL_BASE_BARS,
1430 .num_ports = 4,
1431 .base_baud = 921600,
1432 .uart_offset = 0x400,
1433 .reg_shift = 7,
1434 },
1435
1436 /* I think this entry is broken - the first_offset looks wrong --rmk */
1437 [pbn_plx_romulus] = {
1438 .flags = FL_BASE2,
1439 .num_ports = 4,
1440 .base_baud = 921600,
1441 .uart_offset = 8 << 2,
1442 .reg_shift = 2,
1443 .first_offset = 0x03,
1444 },
1445
1446 /*
1447 * This board uses the size of PCI Base region 0 to
1448 * signal now many ports are available
1449 */
1450 [pbn_oxsemi] = {
1451 .flags = FL_BASE0|FL_REGION_SZ_CAP,
1452 .num_ports = 32,
1453 .base_baud = 115200,
1454 .uart_offset = 8,
1455 },
1456
1457 /*
1458 * EKF addition for i960 Boards form EKF with serial port.
1459 * Max 256 ports.
1460 */
1461 [pbn_intel_i960] = {
1462 .flags = FL_BASE0,
1463 .num_ports = 32,
1464 .base_baud = 921600,
1465 .uart_offset = 8 << 2,
1466 .reg_shift = 2,
1467 .first_offset = 0x10000,
1468 },
1469 [pbn_sgi_ioc3] = {
1470 .flags = FL_BASE0|FL_NOIRQ,
1471 .num_ports = 1,
1472 .base_baud = 458333,
1473 .uart_offset = 8,
1474 .reg_shift = 0,
1475 .first_offset = 0x20178,
1476 },
1477
1478 /*
1479 * NEC Vrc-5074 (Nile 4) builtin UART.
1480 */
1481 [pbn_nec_nile4] = {
1482 .flags = FL_BASE0,
1483 .num_ports = 1,
1484 .base_baud = 520833,
1485 .uart_offset = 8 << 3,
1486 .reg_shift = 3,
1487 .first_offset = 0x300,
1488 },
1489
1490 /*
1491 * Computone - uses IOMEM.
1492 */
1493 [pbn_computone_4] = {
1494 .flags = FL_BASE0,
1495 .num_ports = 4,
1496 .base_baud = 921600,
1497 .uart_offset = 0x40,
1498 .reg_shift = 2,
1499 .first_offset = 0x200,
1500 },
1501 [pbn_computone_6] = {
1502 .flags = FL_BASE0,
1503 .num_ports = 6,
1504 .base_baud = 921600,
1505 .uart_offset = 0x40,
1506 .reg_shift = 2,
1507 .first_offset = 0x200,
1508 },
1509 [pbn_computone_8] = {
1510 .flags = FL_BASE0,
1511 .num_ports = 8,
1512 .base_baud = 921600,
1513 .uart_offset = 0x40,
1514 .reg_shift = 2,
1515 .first_offset = 0x200,
1516 },
1517 [pbn_sbsxrsio] = {
1518 .flags = FL_BASE0,
1519 .num_ports = 8,
1520 .base_baud = 460800,
1521 .uart_offset = 256,
1522 .reg_shift = 4,
1523 },
1524 /*
1525 * Exar Corp. XR17C15[248] Dual/Quad/Octal UART
1526 * Only basic 16550A support.
1527 * XR17C15[24] are not tested, but they should work.
1528 */
1529 [pbn_exar_XR17C152] = {
1530 .flags = FL_BASE0,
1531 .num_ports = 2,
1532 .base_baud = 921600,
1533 .uart_offset = 0x200,
1534 },
1535 [pbn_exar_XR17C154] = {
1536 .flags = FL_BASE0,
1537 .num_ports = 4,
1538 .base_baud = 921600,
1539 .uart_offset = 0x200,
1540 },
1541 [pbn_exar_XR17C158] = {
1542 .flags = FL_BASE0,
1543 .num_ports = 8,
1544 .base_baud = 921600,
1545 .uart_offset = 0x200,
1546 },
1547};
1548
1549/*
1550 * Given a complete unknown PCI device, try to use some heuristics to
1551 * guess what the configuration might be, based on the pitiful PCI
1552 * serial specs. Returns 0 on success, 1 on failure.
1553 */
1554static int __devinit
1555serial_pci_guess_board(struct pci_dev *dev, struct pci_board *board)
1556{
1557 int num_iomem, num_port, first_port = -1, i;
1558
1559 /*
1560 * If it is not a communications device or the programming
1561 * interface is greater than 6, give up.
1562 *
1563 * (Should we try to make guesses for multiport serial devices
1564 * later?)
1565 */
1566 if ((((dev->class >> 8) != PCI_CLASS_COMMUNICATION_SERIAL) &&
1567 ((dev->class >> 8) != PCI_CLASS_COMMUNICATION_MODEM)) ||
1568 (dev->class & 0xff) > 6)
1569 return -ENODEV;
1570
1571 num_iomem = num_port = 0;
1572 for (i = 0; i < PCI_NUM_BAR_RESOURCES; i++) {
1573 if (pci_resource_flags(dev, i) & IORESOURCE_IO) {
1574 num_port++;
1575 if (first_port == -1)
1576 first_port = i;
1577 }
1578 if (pci_resource_flags(dev, i) & IORESOURCE_MEM)
1579 num_iomem++;
1580 }
1581
1582 /*
1583 * If there is 1 or 0 iomem regions, and exactly one port,
1584 * use it. We guess the number of ports based on the IO
1585 * region size.
1586 */
1587 if (num_iomem <= 1 && num_port == 1) {
1588 board->flags = first_port;
1589 board->num_ports = pci_resource_len(dev, first_port) / 8;
1590 return 0;
1591 }
1592
1593 /*
1594 * Now guess if we've got a board which indexes by BARs.
1595 * Each IO BAR should be 8 bytes, and they should follow
1596 * consecutively.
1597 */
1598 first_port = -1;
1599 num_port = 0;
1600 for (i = 0; i < PCI_NUM_BAR_RESOURCES; i++) {
1601 if (pci_resource_flags(dev, i) & IORESOURCE_IO &&
1602 pci_resource_len(dev, i) == 8 &&
1603 (first_port == -1 || (first_port + num_port) == i)) {
1604 num_port++;
1605 if (first_port == -1)
1606 first_port = i;
1607 }
1608 }
1609
1610 if (num_port > 1) {
1611 board->flags = first_port | FL_BASE_BARS;
1612 board->num_ports = num_port;
1613 return 0;
1614 }
1615
1616 return -ENODEV;
1617}
1618
1619static inline int
1620serial_pci_matches(struct pci_board *board, struct pci_board *guessed)
1621{
1622 return
1623 board->num_ports == guessed->num_ports &&
1624 board->base_baud == guessed->base_baud &&
1625 board->uart_offset == guessed->uart_offset &&
1626 board->reg_shift == guessed->reg_shift &&
1627 board->first_offset == guessed->first_offset;
1628}
1629
1630/*
1631 * Probe one serial board. Unfortunately, there is no rhyme nor reason
1632 * to the arrangement of serial ports on a PCI card.
1633 */
1634static int __devinit
1635pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent)
1636{
1637 struct serial_private *priv;
1638 struct pci_board *board, tmp;
1639 struct pci_serial_quirk *quirk;
1640 int rc, nr_ports, i;
1641
1642 if (ent->driver_data >= ARRAY_SIZE(pci_boards)) {
1643 printk(KERN_ERR "pci_init_one: invalid driver_data: %ld\n",
1644 ent->driver_data);
1645 return -EINVAL;
1646 }
1647
1648 board = &pci_boards[ent->driver_data];
1649
1650 rc = pci_enable_device(dev);
1651 if (rc)
1652 return rc;
1653
1654 if (ent->driver_data == pbn_default) {
1655 /*
1656 * Use a copy of the pci_board entry for this;
1657 * avoid changing entries in the table.
1658 */
1659 memcpy(&tmp, board, sizeof(struct pci_board));
1660 board = &tmp;
1661
1662 /*
1663 * We matched one of our class entries. Try to
1664 * determine the parameters of this board.
1665 */
1666 rc = serial_pci_guess_board(dev, board);
1667 if (rc)
1668 goto disable;
1669 } else {
1670 /*
1671 * We matched an explicit entry. If we are able to
1672 * detect this boards settings with our heuristic,
1673 * then we no longer need this entry.
1674 */
1675 memcpy(&tmp, &pci_boards[pbn_default], sizeof(struct pci_board));
1676 rc = serial_pci_guess_board(dev, &tmp);
1677 if (rc == 0 && serial_pci_matches(board, &tmp))
1678 moan_device("Redundant entry in serial pci_table.",
1679 dev);
1680 }
1681
1682 nr_ports = board->num_ports;
1683
1684 /*
1685 * Find an init and setup quirks.
1686 */
1687 quirk = find_quirk(dev);
1688
1689 /*
1690 * Run the new-style initialization function.
1691 * The initialization function returns:
1692 * <0 - error
1693 * 0 - use board->num_ports
1694 * >0 - number of ports
1695 */
1696 if (quirk->init) {
1697 rc = quirk->init(dev);
1698 if (rc < 0)
1699 goto disable;
1700 if (rc)
1701 nr_ports = rc;
1702 }
1703
1704 priv = kmalloc(sizeof(struct serial_private) +
1705 sizeof(unsigned int) * nr_ports,
1706 GFP_KERNEL);
1707 if (!priv) {
1708 rc = -ENOMEM;
1709 goto deinit;
1710 }
1711
1712 memset(priv, 0, sizeof(struct serial_private) +
1713 sizeof(unsigned int) * nr_ports);
1714
1715 priv->quirk = quirk;
1716 pci_set_drvdata(dev, priv);
1717
1718 for (i = 0; i < nr_ports; i++) {
1719 struct uart_port serial_port;
1720 memset(&serial_port, 0, sizeof(struct uart_port));
1721
1722 serial_port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF |
1723 UPF_SHARE_IRQ;
1724 serial_port.uartclk = board->base_baud * 16;
1725 serial_port.irq = get_pci_irq(dev, board, i);
1726 serial_port.dev = &dev->dev;
1727 if (quirk->setup(dev, board, &serial_port, i))
1728 break;
1729#ifdef SERIAL_DEBUG_PCI
1730 printk("Setup PCI port: port %x, irq %d, type %d\n",
1731 serial_port.iobase, serial_port.irq, serial_port.iotype);
1732#endif
1733
1734 priv->line[i] = serial8250_register_port(&serial_port);
1735 if (priv->line[i] < 0) {
1736 printk(KERN_WARNING "Couldn't register serial port %s: %d\n", pci_name(dev), priv->line[i]);
1737 break;
1738 }
1739 }
1740
1741 priv->nr = i;
1742
1743 return 0;
1744
1745 deinit:
1746 if (quirk->exit)
1747 quirk->exit(dev);
1748 disable:
1749 pci_disable_device(dev);
1750 return rc;
1751}
1752
1753static void __devexit pciserial_remove_one(struct pci_dev *dev)
1754{
1755 struct serial_private *priv = pci_get_drvdata(dev);
1756
1757 pci_set_drvdata(dev, NULL);
1758
1759 if (priv) {
1760 struct pci_serial_quirk *quirk;
1761 int i;
1762
1763 for (i = 0; i < priv->nr; i++)
1764 serial8250_unregister_port(priv->line[i]);
1765
1766 for (i = 0; i < PCI_NUM_BAR_RESOURCES; i++) {
1767 if (priv->remapped_bar[i])
1768 iounmap(priv->remapped_bar[i]);
1769 priv->remapped_bar[i] = NULL;
1770 }
1771
1772 /*
1773 * Find the exit quirks.
1774 */
1775 quirk = find_quirk(dev);
1776 if (quirk->exit)
1777 quirk->exit(dev);
1778
1779 pci_disable_device(dev);
1780
1781 kfree(priv);
1782 }
1783}
1784
1785static int pciserial_suspend_one(struct pci_dev *dev, pm_message_t state)
1786{
1787 struct serial_private *priv = pci_get_drvdata(dev);
1788
1789 if (priv) {
1790 int i;
1791
1792 for (i = 0; i < priv->nr; i++)
1793 serial8250_suspend_port(priv->line[i]);
1794 }
1795 pci_save_state(dev);
1796 pci_set_power_state(dev, pci_choose_state(dev, state));
1797 return 0;
1798}
1799
1800static int pciserial_resume_one(struct pci_dev *dev)
1801{
1802 struct serial_private *priv = pci_get_drvdata(dev);
1803
1804 pci_set_power_state(dev, PCI_D0);
1805 pci_restore_state(dev);
1806
1807 if (priv) {
1808 int i;
1809
1810 /*
1811 * The device may have been disabled. Re-enable it.
1812 */
1813 pci_enable_device(dev);
1814
1815 /*
1816 * Ensure that the board is correctly configured.
1817 */
1818 if (priv->quirk->init)
1819 priv->quirk->init(dev);
1820
1821 for (i = 0; i < priv->nr; i++)
1822 serial8250_resume_port(priv->line[i]);
1823 }
1824 return 0;
1825}
1826
1827static struct pci_device_id serial_pci_tbl[] = {
1828 { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960,
1829 PCI_SUBVENDOR_ID_CONNECT_TECH,
1830 PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_232, 0, 0,
1831 pbn_b1_8_1382400 },
1832 { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960,
1833 PCI_SUBVENDOR_ID_CONNECT_TECH,
1834 PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_232, 0, 0,
1835 pbn_b1_4_1382400 },
1836 { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960,
1837 PCI_SUBVENDOR_ID_CONNECT_TECH,
1838 PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_232, 0, 0,
1839 pbn_b1_2_1382400 },
1840 { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
1841 PCI_SUBVENDOR_ID_CONNECT_TECH,
1842 PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_232, 0, 0,
1843 pbn_b1_8_1382400 },
1844 { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
1845 PCI_SUBVENDOR_ID_CONNECT_TECH,
1846 PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_232, 0, 0,
1847 pbn_b1_4_1382400 },
1848 { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
1849 PCI_SUBVENDOR_ID_CONNECT_TECH,
1850 PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_232, 0, 0,
1851 pbn_b1_2_1382400 },
1852 { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
1853 PCI_SUBVENDOR_ID_CONNECT_TECH,
1854 PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485, 0, 0,
1855 pbn_b1_8_921600 },
1856 { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
1857 PCI_SUBVENDOR_ID_CONNECT_TECH,
1858 PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485_4_4, 0, 0,
1859 pbn_b1_8_921600 },
1860 { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
1861 PCI_SUBVENDOR_ID_CONNECT_TECH,
1862 PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_485, 0, 0,
1863 pbn_b1_4_921600 },
1864 { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
1865 PCI_SUBVENDOR_ID_CONNECT_TECH,
1866 PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_485_2_2, 0, 0,
1867 pbn_b1_4_921600 },
1868 { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
1869 PCI_SUBVENDOR_ID_CONNECT_TECH,
1870 PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_485, 0, 0,
1871 pbn_b1_2_921600 },
1872 { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
1873 PCI_SUBVENDOR_ID_CONNECT_TECH,
1874 PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485_2_6, 0, 0,
1875 pbn_b1_8_921600 },
1876 { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
1877 PCI_SUBVENDOR_ID_CONNECT_TECH,
1878 PCI_SUBDEVICE_ID_CONNECT_TECH_BH081101V1, 0, 0,
1879 pbn_b1_8_921600 },
1880 { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
1881 PCI_SUBVENDOR_ID_CONNECT_TECH,
1882 PCI_SUBDEVICE_ID_CONNECT_TECH_BH041101V1, 0, 0,
1883 pbn_b1_4_921600 },
1884
1885 { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_U530,
1886 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
1887 pbn_b2_bt_1_115200 },
1888 { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM2,
1889 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
1890 pbn_b2_bt_2_115200 },
1891 { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM422,
1892 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
1893 pbn_b2_bt_4_115200 },
1894 { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM232,
1895 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
1896 pbn_b2_bt_2_115200 },
1897 { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_COMM4,
1898 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
1899 pbn_b2_bt_4_115200 },
1900 { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_COMM8,
1901 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
1902 pbn_b2_8_115200 },
1903 { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM8,
1904 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
1905 pbn_b2_8_115200 },
1906
1907 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_GTEK_SERIAL2,
1908 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
1909 pbn_b2_bt_2_115200 },
1910 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_SPCOM200,
1911 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
1912 pbn_b2_bt_2_921600 },
1913 /*
1914 * VScom SPCOM800, from sl@s.pl
1915 */
1916 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_SPCOM800,
1917 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
1918 pbn_b2_8_921600 },
1919 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_1077,
1920 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
1921 pbn_b2_4_921600 },
1922 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
1923 PCI_SUBVENDOR_ID_KEYSPAN,
1924 PCI_SUBDEVICE_ID_KEYSPAN_SX2, 0, 0,
1925 pbn_panacom },
1926 { PCI_VENDOR_ID_PANACOM, PCI_DEVICE_ID_PANACOM_QUADMODEM,
1927 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
1928 pbn_panacom4 },
1929 { PCI_VENDOR_ID_PANACOM, PCI_DEVICE_ID_PANACOM_DUALMODEM,
1930 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
1931 pbn_panacom2 },
1932 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
1933 PCI_SUBVENDOR_ID_CHASE_PCIFAST,
1934 PCI_SUBDEVICE_ID_CHASE_PCIFAST4, 0, 0,
1935 pbn_b2_4_460800 },
1936 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
1937 PCI_SUBVENDOR_ID_CHASE_PCIFAST,
1938 PCI_SUBDEVICE_ID_CHASE_PCIFAST8, 0, 0,
1939 pbn_b2_8_460800 },
1940 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
1941 PCI_SUBVENDOR_ID_CHASE_PCIFAST,
1942 PCI_SUBDEVICE_ID_CHASE_PCIFAST16, 0, 0,
1943 pbn_b2_16_460800 },
1944 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
1945 PCI_SUBVENDOR_ID_CHASE_PCIFAST,
1946 PCI_SUBDEVICE_ID_CHASE_PCIFAST16FMC, 0, 0,
1947 pbn_b2_16_460800 },
1948 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
1949 PCI_SUBVENDOR_ID_CHASE_PCIRAS,
1950 PCI_SUBDEVICE_ID_CHASE_PCIRAS4, 0, 0,
1951 pbn_b2_4_460800 },
1952 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
1953 PCI_SUBVENDOR_ID_CHASE_PCIRAS,
1954 PCI_SUBDEVICE_ID_CHASE_PCIRAS8, 0, 0,
1955 pbn_b2_8_460800 },
1956 /*
1957 * Megawolf Romulus PCI Serial Card, from Mike Hudson
1958 * (Exoray@isys.ca)
1959 */
1960 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_ROMULUS,
1961 0x10b5, 0x106a, 0, 0,
1962 pbn_plx_romulus },
1963 { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_QSC100,
1964 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
1965 pbn_b1_4_115200 },
1966 { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSC100,
1967 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
1968 pbn_b1_2_115200 },
1969 { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_ESC100D,
1970 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
1971 pbn_b1_8_115200 },
1972 { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_ESC100M,
1973 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
1974 pbn_b1_8_115200 },
1975 { PCI_VENDOR_ID_SPECIALIX, PCI_DEVICE_ID_OXSEMI_16PCI954,
1976 PCI_VENDOR_ID_SPECIALIX, PCI_SUBDEVICE_ID_SPECIALIX_SPEED4, 0, 0,
1977 pbn_b0_4_921600 },
1978 { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954,
1979 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
1980 pbn_b0_4_115200 },
1981 { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI952,
1982 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
1983 pbn_b0_bt_2_921600 },
1984
1985 /*
1986 * SBS Technologies, Inc. P-Octal and PMC-OCTPRO cards,
1987 * from skokodyn@yahoo.com
1988 */
1989 { PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO,
1990 PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_OCTPRO232, 0, 0,
1991 pbn_sbsxrsio },
1992 { PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO,
1993 PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_OCTPRO422, 0, 0,
1994 pbn_sbsxrsio },
1995 { PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO,
1996 PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_POCTAL232, 0, 0,
1997 pbn_sbsxrsio },
1998 { PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO,
1999 PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_POCTAL422, 0, 0,
2000 pbn_sbsxrsio },
2001
2002 /*
2003 * Digitan DS560-558, from jimd@esoft.com
2004 */
2005 { PCI_VENDOR_ID_ATT, PCI_DEVICE_ID_ATT_VENUS_MODEM,
2006 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2007 pbn_b1_1_115200 },
2008
2009 /*
2010 * Titan Electronic cards
2011 * The 400L and 800L have a custom setup quirk.
2012 */
2013 { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_100,
2014 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2015 pbn_b0_1_921600 },
2016 { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200,
2017 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2018 pbn_b0_2_921600 },
2019 { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400,
2020 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2021 pbn_b0_4_921600 },
2022 { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800B,
2023 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2024 pbn_b0_4_921600 },
2025 { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_100L,
2026 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2027 pbn_b1_1_921600 },
2028 { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200L,
2029 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2030 pbn_b1_bt_2_921600 },
2031 { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400L,
2032 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2033 pbn_b0_bt_4_921600 },
2034 { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800L,
2035 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2036 pbn_b0_bt_8_921600 },
2037
2038 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_10x_550,
2039 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2040 pbn_b2_1_460800 },
2041 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_10x_650,
2042 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2043 pbn_b2_1_460800 },
2044 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_10x_850,
2045 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2046 pbn_b2_1_460800 },
2047 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_10x_550,
2048 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2049 pbn_b2_bt_2_921600 },
2050 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_10x_650,
2051 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2052 pbn_b2_bt_2_921600 },
2053 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_10x_850,
2054 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2055 pbn_b2_bt_2_921600 },
2056 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_10x_550,
2057 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2058 pbn_b2_bt_4_921600 },
2059 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_10x_650,
2060 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2061 pbn_b2_bt_4_921600 },
2062 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_10x_850,
2063 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2064 pbn_b2_bt_4_921600 },
2065 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_20x_550,
2066 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2067 pbn_b0_1_921600 },
2068 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_20x_650,
2069 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2070 pbn_b0_1_921600 },
2071 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_20x_850,
2072 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2073 pbn_b0_1_921600 },
2074 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_20x_550,
2075 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2076 pbn_b0_bt_2_921600 },
2077 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_20x_650,
2078 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2079 pbn_b0_bt_2_921600 },
2080 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_20x_850,
2081 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2082 pbn_b0_bt_2_921600 },
2083 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_20x_550,
2084 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2085 pbn_b0_bt_4_921600 },
2086 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_20x_650,
2087 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2088 pbn_b0_bt_4_921600 },
2089 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_20x_850,
2090 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2091 pbn_b0_bt_4_921600 },
2092
2093 /*
2094 * Computone devices submitted by Doug McNash dmcnash@computone.com
2095 */
2096 { PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_PG,
2097 PCI_SUBVENDOR_ID_COMPUTONE, PCI_SUBDEVICE_ID_COMPUTONE_PG4,
2098 0, 0, pbn_computone_4 },
2099 { PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_PG,
2100 PCI_SUBVENDOR_ID_COMPUTONE, PCI_SUBDEVICE_ID_COMPUTONE_PG8,
2101 0, 0, pbn_computone_8 },
2102 { PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_PG,
2103 PCI_SUBVENDOR_ID_COMPUTONE, PCI_SUBDEVICE_ID_COMPUTONE_PG6,
2104 0, 0, pbn_computone_6 },
2105
2106 { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI95N,
2107 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2108 pbn_oxsemi },
2109 { PCI_VENDOR_ID_TIMEDIA, PCI_DEVICE_ID_TIMEDIA_1889,
2110 PCI_VENDOR_ID_TIMEDIA, PCI_ANY_ID, 0, 0,
2111 pbn_b0_bt_1_921600 },
2112
2113 /*
2114 * AFAVLAB serial card, from Harald Welte <laforge@gnumonks.org>
2115 */
2116 { PCI_VENDOR_ID_AFAVLAB, PCI_DEVICE_ID_AFAVLAB_P028,
2117 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2118 pbn_b0_bt_8_115200 },
2119 { PCI_VENDOR_ID_AFAVLAB, PCI_DEVICE_ID_AFAVLAB_P030,
2120 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2121 pbn_b0_bt_8_115200 },
2122
2123 { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_DSERIAL,
2124 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2125 pbn_b0_bt_2_115200 },
2126 { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATRO_A,
2127 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2128 pbn_b0_bt_2_115200 },
2129 { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATRO_B,
2130 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2131 pbn_b0_bt_2_115200 },
2132 { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_OCTO_A,
2133 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2134 pbn_b0_bt_4_460800 },
2135 { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_OCTO_B,
2136 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2137 pbn_b0_bt_4_460800 },
2138 { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_PORT_PLUS,
2139 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2140 pbn_b0_bt_2_460800 },
2141 { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUAD_A,
2142 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2143 pbn_b0_bt_2_460800 },
2144 { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUAD_B,
2145 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2146 pbn_b0_bt_2_460800 },
2147 { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_SSERIAL,
2148 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2149 pbn_b0_bt_1_115200 },
2150 { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_PORT_650,
2151 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2152 pbn_b0_bt_1_460800 },
2153
2154 /*
2155 * Dell Remote Access Card 4 - Tim_T_Murphy@Dell.com
2156 */
2157 { PCI_VENDOR_ID_DELL, PCI_DEVICE_ID_DELL_RAC4,
2158 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2159 pbn_b1_1_1382400 },
2160
2161 /*
2162 * Dell Remote Access Card III - Tim_T_Murphy@Dell.com
2163 */
2164 { PCI_VENDOR_ID_DELL, PCI_DEVICE_ID_DELL_RACIII,
2165 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2166 pbn_b1_1_1382400 },
2167
2168 /*
2169 * RAStel 2 port modem, gerg@moreton.com.au
2170 */
2171 { PCI_VENDOR_ID_MORETON, PCI_DEVICE_ID_RASTEL_2PORT,
2172 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2173 pbn_b2_bt_2_115200 },
2174
2175 /*
2176 * EKF addition for i960 Boards form EKF with serial port
2177 */
2178 { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80960_RP,
2179 0xE4BF, PCI_ANY_ID, 0, 0,
2180 pbn_intel_i960 },
2181
2182 /*
2183 * Xircom Cardbus/Ethernet combos
2184 */
2185 { PCI_VENDOR_ID_XIRCOM, PCI_DEVICE_ID_XIRCOM_X3201_MDM,
2186 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2187 pbn_b0_1_115200 },
2188 /*
2189 * Xircom RBM56G cardbus modem - Dirk Arnold (temp entry)
2190 */
2191 { PCI_VENDOR_ID_XIRCOM, PCI_DEVICE_ID_XIRCOM_RBM56G,
2192 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2193 pbn_b0_1_115200 },
2194
2195 /*
2196 * Untested PCI modems, sent in from various folks...
2197 */
2198
2199 /*
2200 * Elsa Model 56K PCI Modem, from Andreas Rath <arh@01019freenet.de>
2201 */
2202 { PCI_VENDOR_ID_ROCKWELL, 0x1004,
2203 0x1048, 0x1500, 0, 0,
2204 pbn_b1_1_115200 },
2205
2206 { PCI_VENDOR_ID_SGI, PCI_DEVICE_ID_SGI_IOC3,
2207 0xFF00, 0, 0, 0,
2208 pbn_sgi_ioc3 },
2209
2210 /*
2211 * HP Diva card
2212 */
2213 { PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA,
2214 PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA_RMP3, 0, 0,
2215 pbn_b1_1_115200 },
2216 { PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA,
2217 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2218 pbn_b0_5_115200 },
2219 { PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA_AUX,
2220 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2221 pbn_b2_1_115200 },
2222
2223 /*
2224 * NEC Vrc-5074 (Nile 4) builtin UART.
2225 */
2226 { PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_NILE4,
2227 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2228 pbn_nec_nile4 },
2229
2230 { PCI_VENDOR_ID_DCI, PCI_DEVICE_ID_DCI_PCCOM4,
2231 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2232 pbn_b3_4_115200 },
2233 { PCI_VENDOR_ID_DCI, PCI_DEVICE_ID_DCI_PCCOM8,
2234 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2235 pbn_b3_8_115200 },
2236
2237 /*
2238 * Exar Corp. XR17C15[248] Dual/Quad/Octal UART
2239 */
2240 { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C152,
2241 PCI_ANY_ID, PCI_ANY_ID,
2242 0,
2243 0, pbn_exar_XR17C152 },
2244 { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C154,
2245 PCI_ANY_ID, PCI_ANY_ID,
2246 0,
2247 0, pbn_exar_XR17C154 },
2248 { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C158,
2249 PCI_ANY_ID, PCI_ANY_ID,
2250 0,
2251 0, pbn_exar_XR17C158 },
2252
2253 /*
2254 * Topic TP560 Data/Fax/Voice 56k modem (reported by Evan Clarke)
2255 */
2256 { PCI_VENDOR_ID_TOPIC, PCI_DEVICE_ID_TOPIC_TP560,
2257 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2258 pbn_b0_1_115200 },
2259
2260 /*
2261 * These entries match devices with class COMMUNICATION_SERIAL,
2262 * COMMUNICATION_MODEM or COMMUNICATION_MULTISERIAL
2263 */
2264 { PCI_ANY_ID, PCI_ANY_ID,
2265 PCI_ANY_ID, PCI_ANY_ID,
2266 PCI_CLASS_COMMUNICATION_SERIAL << 8,
2267 0xffff00, pbn_default },
2268 { PCI_ANY_ID, PCI_ANY_ID,
2269 PCI_ANY_ID, PCI_ANY_ID,
2270 PCI_CLASS_COMMUNICATION_MODEM << 8,
2271 0xffff00, pbn_default },
2272 { PCI_ANY_ID, PCI_ANY_ID,
2273 PCI_ANY_ID, PCI_ANY_ID,
2274 PCI_CLASS_COMMUNICATION_MULTISERIAL << 8,
2275 0xffff00, pbn_default },
2276 { 0, }
2277};
2278
2279static struct pci_driver serial_pci_driver = {
2280 .name = "serial",
2281 .probe = pciserial_init_one,
2282 .remove = __devexit_p(pciserial_remove_one),
2283 .suspend = pciserial_suspend_one,
2284 .resume = pciserial_resume_one,
2285 .id_table = serial_pci_tbl,
2286};
2287
2288static int __init serial8250_pci_init(void)
2289{
2290 return pci_register_driver(&serial_pci_driver);
2291}
2292
2293static void __exit serial8250_pci_exit(void)
2294{
2295 pci_unregister_driver(&serial_pci_driver);
2296}
2297
2298module_init(serial8250_pci_init);
2299module_exit(serial8250_pci_exit);
2300
2301MODULE_LICENSE("GPL");
2302MODULE_DESCRIPTION("Generic 8250/16x50 PCI serial probe module");
2303MODULE_DEVICE_TABLE(pci, serial_pci_tbl);
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-04 02:54:37 -0500