40 files changed, 86 insertions, 86 deletions

diff --git a/drivers/scsi/3w-9xxx.c b/drivers/scsi/3w-9xxx.c
index 2d16d49fd3cd..3bf75924741f 100644
--- a/drivers/scsi/3w-9xxx.c
+++ b/drivers/scsi/3w-9xxx.c
@@ -736,7 +736,7 @@ static int twa_chrdev_ioctl(struct inode *inode, struct file *file, unsigned int
                 break;
         case TW_IOCTL_GET_COMPATIBILITY_INFO:
                 tw_ioctl->driver_command.status = 0;
-                /* Copy compatiblity struct into ioctl data buffer */
+                /* Copy compatibility struct into ioctl data buffer */
                 tw_compat_info = (TW_Compatibility_Info *)tw_ioctl->data_buffer;
                 memcpy(tw_compat_info, &tw_dev->tw_compat_info, sizeof(TW_Compatibility_Info));
                 break;
diff --git a/drivers/scsi/3w-xxxx.c b/drivers/scsi/3w-xxxx.c
index d224294c38fb..f65a1e92340c 100644
--- a/drivers/scsi/3w-xxxx.c
+++ b/drivers/scsi/3w-xxxx.c
@@ -8,7 +8,7 @@
 
    Copyright (C) 1999-2009 3ware Inc.
 
-   Kernel compatiblity By:      Andre Hedrick <andre@suse.com>
+   Kernel compatibility By:     Andre Hedrick <andre@suse.com>
    Non-Copyright (C) 2000       Andre Hedrick <andre@suse.com>
    
    Further tiny build fixes and trivial hoovering    Alan Cox
diff --git a/drivers/scsi/53c700.c b/drivers/scsi/53c700.c
index 6c60a8060c58..9f4a911a6d8c 100644
--- a/drivers/scsi/53c700.c
+++ b/drivers/scsi/53c700.c
@@ -1491,7 +1491,7 @@ NCR_700_intr(int irq, void *dev_id)
         unsigned long flags;
         int handled = 0;
 
-        /* Use the host lock to serialise acess to the 53c700
+        /* Use the host lock to serialise access to the 53c700
          * hardware.  Note: In future, we may need to take the queue
          * lock to enter the done routines.  When that happens, we
          * need to ensure that for this driver, the host lock and the
diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h
index cdbdec9f4fb2..83986ed86556 100644
--- a/drivers/scsi/aacraid/aacraid.h
+++ b/drivers/scsi/aacraid/aacraid.h
@@ -526,10 +526,10 @@ struct aac_driver_ident
 
 /*
  *      The adapter interface specs all queues to be located in the same
- *      physically contigous block. The host structure that defines the
+ *      physically contiguous block. The host structure that defines the
  *      commuication queues will assume they are each a separate physically
- *      contigous memory region that will support them all being one big
- *      contigous block.
+ *      contiguous memory region that will support them all being one big
+ *      contiguous block.
  *      There is a command and response queue for each level and direction of
  *      commuication. These regions are accessed by both the host and adapter.
  */
diff --git a/drivers/scsi/aacraid/comminit.c b/drivers/scsi/aacraid/comminit.c
index d598eba630d0..666d5151d628 100644
--- a/drivers/scsi/aacraid/comminit.c
+++ b/drivers/scsi/aacraid/comminit.c
@@ -226,7 +226,7 @@ static int aac_comm_init(struct aac_dev * dev)
         spin_lock_init(&dev->fib_lock);
 
         /*
-         *      Allocate the physically contigous space for the commuication
+         *      Allocate the physically contiguous space for the commuication
          *      queue headers. 
          */
 
diff --git a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c
index b756041f0b26..22626abdb630 100644
--- a/drivers/scsi/advansys.c
+++ b/drivers/scsi/advansys.c
@@ -7969,7 +7969,7 @@ static int advansys_reset(struct scsi_cmnd *scp)
                 ASC_DBG(1, "before AscInitAsc1000Driver()\n");
                 status = AscInitAsc1000Driver(asc_dvc);
 
-                /* Refer to ASC_IERR_* defintions for meaning of 'err_code'. */
+                /* Refer to ASC_IERR_* definitions for meaning of 'err_code'. */
                 if (asc_dvc->err_code) {
                         scmd_printk(KERN_INFO, scp, "SCSI bus reset error: "
                                     "0x%x\n", asc_dvc->err_code);
diff --git a/drivers/scsi/aic7xxx/aic79xx.seq b/drivers/scsi/aic7xxx/aic79xx.seq
index 58bc17591b54..2fb78e35a9e5 100644
--- a/drivers/scsi/aic7xxx/aic79xx.seq
+++ b/drivers/scsi/aic7xxx/aic79xx.seq
@@ -217,7 +217,7 @@ BEGIN_CRITICAL;
 scbdma_tohost_done:
         test    CCSCBCTL, CCARREN jz fill_qoutfifo_dmadone;
         /*
-         * An SCB has been succesfully uploaded to the host.
+         * An SCB has been successfully uploaded to the host.
          * If the SCB was uploaded for some reason other than
          * bad SCSI status (currently only for underruns), we
          * queue the SCB for normal completion.  Otherwise, we
@@ -1281,7 +1281,7 @@ END_CRITICAL;
  * Is it a disconnect message?  Set a flag in the SCB to remind us
  * and await the bus going free.  If this is an untagged transaction
  * store the SCB id for it in our untagged target table for lookup on
- * a reselction.
+ * a reselection.
  */
 mesgin_disconnect:
         /*
diff --git a/drivers/scsi/aic7xxx/aic79xx_core.c b/drivers/scsi/aic7xxx/aic79xx_core.c
index 63b521d615f2..4d419c155ce9 100644
--- a/drivers/scsi/aic7xxx/aic79xx_core.c
+++ b/drivers/scsi/aic7xxx/aic79xx_core.c
@@ -2487,7 +2487,7 @@ ahd_handle_scsiint(struct ahd_softc *ahd, u_int intstat)
                 /*
                  * Although the driver does not care about the
                  * 'Selection in Progress' status bit, the busy
-                 * LED does.  SELINGO is only cleared by a sucessfull
+                 * LED does.  SELINGO is only cleared by a successfull
                  * selection, so we must manually clear it to insure
                  * the LED turns off just incase no future successful
                  * selections occur (e.g. no devices on the bus).
diff --git a/drivers/scsi/aic7xxx/aic79xx_osm.c b/drivers/scsi/aic7xxx/aic79xx_osm.c
index 75b23317bd26..1222a7ac698a 100644
--- a/drivers/scsi/aic7xxx/aic79xx_osm.c
+++ b/drivers/scsi/aic7xxx/aic79xx_osm.c
@@ -2335,7 +2335,7 @@ ahd_linux_queue_abort_cmd(struct scsi_cmnd *cmd)
                         /*
                          * The sequencer will never re-reference the
                          * in-core SCB.  To make sure we are notified
-                         * during reslection, set the MK_MESSAGE flag in
+                         * during reselection, set the MK_MESSAGE flag in
                          * the card's copy of the SCB.
                          */
                         ahd_outb(ahd, SCB_CONTROL,
diff --git a/drivers/scsi/aic7xxx/aic7xxx.seq b/drivers/scsi/aic7xxx/aic7xxx.seq
index 15196390e28d..5a4cfc954a9f 100644
--- a/drivers/scsi/aic7xxx/aic7xxx.seq
+++ b/drivers/scsi/aic7xxx/aic7xxx.seq
@@ -1693,7 +1693,7 @@ if ((ahc->flags & AHC_INITIATORROLE) != 0) {
  * Is it a disconnect message?  Set a flag in the SCB to remind us
  * and await the bus going free.  If this is an untagged transaction
  * store the SCB id for it in our untagged target table for lookup on
- * a reselction.
+ * a reselection.
  */
 mesgin_disconnect:
         /*
diff --git a/drivers/scsi/aic7xxx/aic7xxx_core.c b/drivers/scsi/aic7xxx/aic7xxx_core.c
index 8dfb59d58992..45aa728a76b2 100644
--- a/drivers/scsi/aic7xxx/aic7xxx_core.c
+++ b/drivers/scsi/aic7xxx/aic7xxx_core.c
@@ -1733,7 +1733,7 @@ ahc_handle_scsiint(struct ahc_softc *ahc, u_int intstat)
                 /*
                  * Although the driver does not care about the
                  * 'Selection in Progress' status bit, the busy
-                 * LED does.  SELINGO is only cleared by a sucessfull
+                 * LED does.  SELINGO is only cleared by a successfull
                  * selection, so we must manually clear it to insure
                  * the LED turns off just incase no future successful
                  * selections occur (e.g. no devices on the bus).
diff --git a/drivers/scsi/aic7xxx/aic7xxx_osm.c b/drivers/scsi/aic7xxx/aic7xxx_osm.c
index fd2b9785ff4f..8cb05dc8e6a1 100644
--- a/drivers/scsi/aic7xxx/aic7xxx_osm.c
+++ b/drivers/scsi/aic7xxx/aic7xxx_osm.c
@@ -2290,7 +2290,7 @@ ahc_linux_queue_recovery_cmd(struct scsi_cmnd *cmd, scb_flag flag)
                  * In the non-paging case, the sequencer will
                  * never re-reference the in-core SCB.
                  * To make sure we are notified during
-                 * reslection, set the MK_MESSAGE flag in
+                 * reselection, set the MK_MESSAGE flag in
                  * the card's copy of the SCB.
                  */
                 if ((ahc->flags & AHC_PAGESCBS) == 0) {
diff --git a/drivers/scsi/aic94xx/aic94xx_reg_def.h b/drivers/scsi/aic94xx/aic94xx_reg_def.h
index a43e8cdf4ee4..28aaf349c111 100644
--- a/drivers/scsi/aic94xx/aic94xx_reg_def.h
+++ b/drivers/scsi/aic94xx/aic94xx_reg_def.h
@@ -1,5 +1,5 @@
 /*
- * Aic94xx SAS/SATA driver hardware registers defintions.
+ * Aic94xx SAS/SATA driver hardware registers definitions.
  *
  * Copyright (C) 2004 Adaptec, Inc.  All rights reserved.
  * Copyright (C) 2004 David Chaw <david_chaw@adaptec.com>
diff --git a/drivers/scsi/bfa/include/defs/bfa_defs_pport.h b/drivers/scsi/bfa/include/defs/bfa_defs_pport.h
index a000bc4e2d4a..bf320412ee24 100644
--- a/drivers/scsi/bfa/include/defs/bfa_defs_pport.h
+++ b/drivers/scsi/bfa/include/defs/bfa_defs_pport.h
@@ -61,7 +61,7 @@ enum bfa_pport_speed {
  *              Port operational type (in sync with SNIA port type).
  */
 enum bfa_pport_type {
-        BFA_PPORT_TYPE_UNKNOWN = 1,     /*  port type is unkown */
+        BFA_PPORT_TYPE_UNKNOWN = 1,     /*  port type is unknown */
         BFA_PPORT_TYPE_TRUNKED = 2,     /*  Trunked mode */
         BFA_PPORT_TYPE_NPORT   = 5,     /*  P2P with switched fabric */
         BFA_PPORT_TYPE_NLPORT  = 6,     /*  public loop */
diff --git a/drivers/scsi/bfa/include/defs/bfa_defs_tsensor.h b/drivers/scsi/bfa/include/defs/bfa_defs_tsensor.h
index 31881d218515..ade763dbc8ce 100644
--- a/drivers/scsi/bfa/include/defs/bfa_defs_tsensor.h
+++ b/drivers/scsi/bfa/include/defs/bfa_defs_tsensor.h
@@ -25,7 +25,7 @@
  * Temperature sensor status values
  */
 enum bfa_tsensor_status {
-        BFA_TSENSOR_STATUS_UNKNOWN   = 1,   /*  unkown status */
+        BFA_TSENSOR_STATUS_UNKNOWN   = 1,   /*  unknown status */
         BFA_TSENSOR_STATUS_FAULTY    = 2,   /*  sensor is faulty */
         BFA_TSENSOR_STATUS_BELOW_MIN = 3,   /*  temperature below mininum */
         BFA_TSENSOR_STATUS_NOMINAL   = 4,   /*  normal temperature */
diff --git a/drivers/scsi/bfa/include/protocol/ct.h b/drivers/scsi/bfa/include/protocol/ct.h
index c8648bcba41a..b82540a230c4 100644
--- a/drivers/scsi/bfa/include/protocol/ct.h
+++ b/drivers/scsi/bfa/include/protocol/ct.h
@@ -82,7 +82,7 @@ enum {
 };
 
 /*
- * defintions for CT reason code
+ * definitions for CT reason code
  */
 enum {
         CT_RSN_INV_CMD          = 0x01,
@@ -129,7 +129,7 @@ enum {
 };
 
 /*
- * defintions for the explanation code for all servers
+ * definitions for the explanation code for all servers
  */
 enum {
         CT_EXP_AUTH_EXCEPTION                   = 0xF1,
diff --git a/drivers/scsi/bnx2i/bnx2i_iscsi.c b/drivers/scsi/bnx2i/bnx2i_iscsi.c
index 070118a8f184..132898c88d5e 100644
--- a/drivers/scsi/bnx2i/bnx2i_iscsi.c
+++ b/drivers/scsi/bnx2i/bnx2i_iscsi.c
@@ -1879,7 +1879,7 @@ static void bnx2i_ep_disconnect(struct iscsi_endpoint *ep)
 
         bnx2i_ep = ep->dd_data;
 
-        /* driver should not attempt connection cleanup untill TCP_CONNECT
+        /* driver should not attempt connection cleanup until TCP_CONNECT
          * completes either successfully or fails. Timeout is 9-secs, so
          * wait for it to complete
          */
diff --git a/drivers/scsi/dc395x.c b/drivers/scsi/dc395x.c
index 075e2397273c..6c59c02c1ed9 100644
--- a/drivers/scsi/dc395x.c
+++ b/drivers/scsi/dc395x.c
@@ -1509,7 +1509,7 @@ static u8 start_scsi(struct AdapterCtlBlk* acb, struct DeviceCtlBlk* dcb,
                  * Try anyway?
                  *
                  * We could, BUT: Sometimes the TRM_S1040 misses to produce a Selection
-                 * Timeout, a Disconnect or a Reselction IRQ, so we would be screwed!
+                 * Timeout, a Disconnect or a Reselection IRQ, so we would be screwed!
                  * (This is likely to be a bug in the hardware. Obviously, most people
                  *  only have one initiator per SCSI bus.)
                  * Instead let this fail and have the timer make sure the command is 
diff --git a/drivers/scsi/dmx3191d.c b/drivers/scsi/dmx3191d.c
index fa738ec8692a..207352cc70cc 100644
--- a/drivers/scsi/dmx3191d.c
+++ b/drivers/scsi/dmx3191d.c
@@ -31,7 +31,7 @@
 #include <scsi/scsi_host.h>
 
 /*
- * Defintions for the generic 5380 driver.
+ * Definitions for the generic 5380 driver.
  */
 #define AUTOSENSE
 
diff --git a/drivers/scsi/hptiop.c b/drivers/scsi/hptiop.c
index 901a3daeb36b..4f0556571f80 100644
--- a/drivers/scsi/hptiop.c
+++ b/drivers/scsi/hptiop.c
@@ -834,7 +834,7 @@ static int hptiop_reset_hba(struct hptiop_hba *hba)
                         atomic_read(&hba->resetting) == 0, 60 * HZ);
 
         if (atomic_read(&hba->resetting)) {
-                /* IOP is in unkown state, abort reset */
+                /* IOP is in unknown state, abort reset */
                 printk(KERN_ERR "scsi%d: reset failed\n", hba->host->host_no);
                 return -1;
         }
diff --git a/drivers/scsi/libfc/fc_lport.c b/drivers/scsi/libfc/fc_lport.c
index bbf4152c9c69..74338c83ad0a 100644
--- a/drivers/scsi/libfc/fc_lport.c
+++ b/drivers/scsi/libfc/fc_lport.c
@@ -56,7 +56,7 @@
  * at the same time.
  *
  * When discovery succeeds or fails a callback is made to the lport as
- * notification. Currently, succesful discovery causes the lport to take no
+ * notification. Currently, successful discovery causes the lport to take no
  * action. A failure will cause the lport to reset. There is likely a circular
  * locking problem with this implementation.
  */
diff --git a/drivers/scsi/libiscsi_tcp.c b/drivers/scsi/libiscsi_tcp.c
index 2e0746d70303..ca25ee5190b0 100644
--- a/drivers/scsi/libiscsi_tcp.c
+++ b/drivers/scsi/libiscsi_tcp.c
@@ -1004,7 +1004,7 @@ static struct iscsi_r2t_info *iscsi_tcp_get_curr_r2t(struct iscsi_task *task)
  * iscsi_tcp_task_xmit - xmit normal PDU task
  * @task: iscsi command task
  *
- * We're expected to return 0 when everything was transmitted succesfully,
+ * We're expected to return 0 when everything was transmitted successfully,
  * -EAGAIN if there's still data in the queue, or != 0 for any other kind
  * of error.
  */
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index 75523603b91c..91542f786edf 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -678,7 +678,7 @@ lpfc_selective_reset(struct lpfc_hba *phba)
  * Notes:
  * Assumes any error from lpfc_selective_reset() will be negative.
  * If lpfc_selective_reset() returns zero then the length of the buffer
- * is returned which indicates succcess
+ * is returned which indicates success
  *
  * Returns:
  * -EINVAL if the buffer does not contain the string "selective"
@@ -3363,7 +3363,7 @@ sysfs_ctlreg_write(struct kobject *kobj, struct bin_attribute *bin_attr,
  * sysfs_ctlreg_read - Read method for reading from ctlreg
  * @kobj: kernel kobject that contains the kernel class device.
  * @bin_attr: kernel attributes passed to us.
- * @buf: if succesful contains the data from the adapter IOREG space.
+ * @buf: if successful contains the data from the adapter IOREG space.
  * @off: offset into buffer to beginning of data.
  * @count: bytes to transfer.
  *
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index a079bbc03cf8..ce522702a6c1 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -815,7 +815,7 @@ lpfc_cmpl_els_flogi(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
 
         /* FLOGI completes successfully */
         lpfc_printf_vlog(vport, KERN_INFO, LOG_ELS,
-                         "0101 FLOGI completes sucessfully "
+                         "0101 FLOGI completes successfully "
                          "Data: x%x x%x x%x x%x\n",
                          irsp->un.ulpWord[4], sp->cmn.e_d_tov,
                          sp->cmn.w2.r_a_tov, sp->cmn.edtovResolution);
@@ -4151,7 +4151,7 @@ lpfc_els_rcv_rscn(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb,
         /* Indicate we are walking fc_rscn_id_list on this vport */
         vport->fc_rscn_flush = 1;
         spin_unlock_irq(shost->host_lock);
-        /* Get the array count after sucessfully have the token */
+        /* Get the array count after successfully have the token */
         rscn_cnt = vport->fc_rscn_id_cnt;
         /* If we are already processing an RSCN, save the received
          * RSCN payload buffer, cmdiocb->context2 to process later.
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 0ba35a9a5c5f..226920d15ea1 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -646,7 +646,7 @@ lpfc_hba_down_prep(struct lpfc_hba *phba)
  * down the SLI Layer.
  *
  * Return codes
- *   0 - sucess.
+ *   0 - success.
  *   Any other value - error.
  **/
 static int
@@ -701,7 +701,7 @@ lpfc_hba_down_post_s3(struct lpfc_hba *phba)
  * down the SLI Layer.
  *
  * Return codes
- *   0 - sucess.
+ *   0 - success.
  *   Any other value - error.
  **/
 static int
@@ -756,7 +756,7 @@ lpfc_hba_down_post_s4(struct lpfc_hba *phba)
  * uninitialization after the HBA is reset when bring down the SLI Layer.
  *
  * Return codes
- *   0 - sucess.
+ *   0 - success.
  *   Any other value - error.
  **/
 int
@@ -1262,7 +1262,7 @@ lpfc_handle_eratt_s4(struct lpfc_hba *phba)
  * routine from the API jump table function pointer from the lpfc_hba struct.
  *
  * Return codes
- *   0 - sucess.
+ *   0 - success.
  *   Any other value - error.
  **/
 void
@@ -3234,7 +3234,7 @@ static void lpfc_log_intr_mode(struct lpfc_hba *phba, uint32_t intr_mode)
  * PCI devices.
  *
  * Return codes
- *      0 - sucessful
+ *      0 - successful
  *      other values - error
  **/
 static int
@@ -3330,7 +3330,7 @@ lpfc_reset_hba(struct lpfc_hba *phba)
  * support the SLI-3 HBA device it attached to.
  *
  * Return codes
- *      0 - sucessful
+ *      0 - successful
  *      other values - error
  **/
 static int
@@ -3431,7 +3431,7 @@ lpfc_sli_driver_resource_unset(struct lpfc_hba *phba)
  * support the SLI-4 HBA device it attached to.
  *
  * Return codes
- *      0 - sucessful
+ *      0 - successful
  *      other values - error
  **/
 static int
@@ -3758,7 +3758,7 @@ lpfc_init_api_table_setup(struct lpfc_hba *phba, uint8_t dev_grp)
  * device specific resource setup to support the HBA device it attached to.
  *
  * Return codes
- *      0 - sucessful
+ *      0 - successful
  *      other values - error
  **/
 static int
@@ -3804,7 +3804,7 @@ lpfc_setup_driver_resource_phase1(struct lpfc_hba *phba)
  * device specific resource setup to support the HBA device it attached to.
  *
  * Return codes
- *      0 - sucessful
+ *      0 - successful
  *      other values - error
  **/
 static int
@@ -3869,7 +3869,7 @@ lpfc_free_iocb_list(struct lpfc_hba *phba)
  * list and set up the IOCB tag array accordingly.
  *
  * Return codes
- *      0 - sucessful
+ *      0 - successful
  *      other values - error
  **/
 static int
@@ -3988,7 +3988,7 @@ lpfc_free_active_sgl(struct lpfc_hba *phba)
  * list and set up the sgl xritag tag array accordingly.
  *
  * Return codes
- *      0 - sucessful
+ *      0 - successful
  *      other values - error
  **/
 static int
@@ -4102,7 +4102,7 @@ out_free_mem:
  * enabled and the driver is reinitializing the device.
  *
  * Return codes
- *      0 - sucessful
+ *      0 - successful
  *      ENOMEM - No availble memory
  *      EIO - The mailbox failed to complete successfully.
  **/
@@ -4262,7 +4262,7 @@ lpfc_sli4_remove_rpi_hdrs(struct lpfc_hba *phba)
  * PCI device data structure is set.
  *
  * Return codes
- *      pointer to @phba - sucessful
+ *      pointer to @phba - successful
  *      NULL - error
  **/
 static struct lpfc_hba *
@@ -4318,7 +4318,7 @@ lpfc_hba_free(struct lpfc_hba *phba)
  * host with it.
  *
  * Return codes
- *      0 - sucessful
+ *      0 - successful
  *      other values - error
  **/
 static int
@@ -4487,7 +4487,7 @@ lpfc_post_init_setup(struct lpfc_hba *phba)
  * with SLI-3 interface spec.
  *
  * Return codes
- *      0 - sucessful
+ *      0 - successful
  *      other values - error
  **/
 static int
@@ -4782,7 +4782,7 @@ lpfc_sli4_bar2_register_memmap(struct lpfc_hba *phba, uint32_t vf)
  * this routine.
  *
  * Return codes
- *      0 - sucessful
+ *      0 - successful
  *      ENOMEM - could not allocated memory.
  **/
 static int
@@ -4881,7 +4881,7 @@ lpfc_destroy_bootstrap_mbox(struct lpfc_hba *phba)
  * allocation for the port.
  *
  * Return codes
- *      0 - sucessful
+ *      0 - successful
  *      ENOMEM - No availble memory
  *      EIO - The mailbox failed to complete successfully.
  **/
@@ -4982,7 +4982,7 @@ lpfc_sli4_read_config(struct lpfc_hba *phba)
  * HBA consistent with the SLI-4 interface spec.
  *
  * Return codes
- *      0 - sucessful
+ *      0 - successful
  *      ENOMEM - No availble memory
  *      EIO - The mailbox failed to complete successfully.
  **/
@@ -5031,7 +5031,7 @@ lpfc_setup_endian_order(struct lpfc_hba *phba)
  * we just use some constant number as place holder.
  *
  * Return codes
- *      0 - sucessful
+ *      0 - successful
  *      ENOMEM - No availble memory
  *      EIO - The mailbox failed to complete successfully.
  **/
@@ -5326,7 +5326,7 @@ out_error:
  * operation.
  *
  * Return codes
- *      0 - sucessful
+ *      0 - successful
  *      ENOMEM - No availble memory
  *      EIO - The mailbox failed to complete successfully.
  **/
@@ -5390,7 +5390,7 @@ lpfc_sli4_queue_destroy(struct lpfc_hba *phba)
  * operation.
  *
  * Return codes
- *      0 - sucessful
+ *      0 - successful
  *      ENOMEM - No availble memory
  *      EIO - The mailbox failed to complete successfully.
  **/
@@ -5635,7 +5635,7 @@ out_error:
  * operation.
  *
  * Return codes
- *      0 - sucessful
+ *      0 - successful
  *      ENOMEM - No availble memory
  *      EIO - The mailbox failed to complete successfully.
  **/
@@ -5680,7 +5680,7 @@ lpfc_sli4_queue_unset(struct lpfc_hba *phba)
  * Later, this can be used for all the slow-path events.
  *
  * Return codes
- *      0 - sucessful
+ *      0 - successful
  *      -ENOMEM - No availble memory
  **/
 static int
@@ -5841,7 +5841,7 @@ lpfc_sli4_cq_event_release_all(struct lpfc_hba *phba)
  * all resources assigned to the PCI function which originates this request.
  *
  * Return codes
- *      0 - sucessful
+ *      0 - successful
  *      ENOMEM - No availble memory
  *      EIO - The mailbox failed to complete successfully.
  **/
@@ -6004,7 +6004,7 @@ lpfc_sli4_fcfi_unreg(struct lpfc_hba *phba, uint16_t fcfi)
  * with SLI-4 interface spec.
  *
  * Return codes
- *      0 - sucessful
+ *      0 - successful
  *      other values - error
  **/
 static int
@@ -6133,7 +6133,7 @@ lpfc_sli4_pci_mem_unset(struct lpfc_hba *phba)
  * will be left with MSI-X enabled and leaks its vectors.
  *
  * Return codes
- *   0 - sucessful
+ *   0 - successful
  *   other values - error
  **/
 static int
@@ -6265,7 +6265,7 @@ lpfc_sli_disable_msix(struct lpfc_hba *phba)
  * is done in this function.
  *
  * Return codes
- *      0 - sucessful
+ *      0 - successful
  *      other values - error
  */
 static int
@@ -6324,7 +6324,7 @@ lpfc_sli_disable_msi(struct lpfc_hba *phba)
  * MSI-X -> MSI -> IRQ.
  *
  * Return codes
- *   0 - sucessful
+ *   0 - successful
  *   other values - error
  **/
 static uint32_t
@@ -6414,7 +6414,7 @@ lpfc_sli_disable_intr(struct lpfc_hba *phba)
  * enabled and leaks its vectors.
  *
  * Return codes
- * 0 - sucessful
+ * 0 - successful
  * other values - error
  **/
 static int
@@ -6524,7 +6524,7 @@ lpfc_sli4_disable_msix(struct lpfc_hba *phba)
  * which is done in this function.
  *
  * Return codes
- *      0 - sucessful
+ *      0 - successful
  *      other values - error
  **/
 static int
@@ -6589,7 +6589,7 @@ lpfc_sli4_disable_msi(struct lpfc_hba *phba)
  * MSI-X -> MSI -> IRQ.
  *
  * Return codes
- *      0 - sucessful
+ *      0 - successful
  *      other values - error
  **/
 static uint32_t
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index b3a69f984d95..7935667b81a5 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -1804,7 +1804,7 @@ lpfc_sli_handle_mb_event(struct lpfc_hba *phba)
                  */
                 if (lpfc_sli_chk_mbx_command(pmbox->mbxCommand) ==
                     MBX_SHUTDOWN) {
-                        /* Unknow mailbox command compl */
+                        /* Unknown mailbox command compl */
                         lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
                                         "(%d):0323 Unknown Mailbox command "
                                         "x%x (x%x) Cmpl\n",
@@ -4062,7 +4062,7 @@ lpfc_sli4_read_fcoe_params(struct lpfc_hba *phba,
  * addition, this routine gets the port vpd data.
  *
  * Return codes
- *      0 - sucessful
+ *      0 - successful
  *      ENOMEM - could not allocated memory.
  **/
 static int
@@ -11428,7 +11428,7 @@ lpfc_sli4_handle_received_buffer(struct lpfc_hba *phba,
  * sequential.
  *
  * Return codes
- *      0 - sucessful
+ *      0 - successful
  *      EIO - The mailbox failed to complete successfully.
  *      When this error occurs, the driver is not guaranteed
  *      to have any rpi regions posted to the device and
@@ -11466,7 +11466,7 @@ lpfc_sli4_post_all_rpi_hdrs(struct lpfc_hba *phba)
  * maps up to 64 rpi context regions.
  *
  * Return codes
- *      0 - sucessful
+ *      0 - successful
  *      ENOMEM - No available memory
  *      EIO - The mailbox failed to complete successfully.
  **/
@@ -11528,7 +11528,7 @@ lpfc_sli4_post_rpi_hdr(struct lpfc_hba *phba, struct lpfc_rpi_hdr *rpi_page)
  * PAGE_SIZE modulo 64 rpi context headers.
  *
  * Returns
- *      A nonzero rpi defined as rpi_base <= rpi < max_rpi if sucessful
+ *      A nonzero rpi defined as rpi_base <= rpi < max_rpi if successful
  *      LPFC_RPI_ALLOC_ERROR if no rpis are available.
  **/
 int
diff --git a/drivers/scsi/megaraid.h b/drivers/scsi/megaraid.h
index 512c2cc1a33f..d310f49d077e 100644
--- a/drivers/scsi/megaraid.h
+++ b/drivers/scsi/megaraid.h
@@ -381,7 +381,7 @@ typedef struct {
         u8      battery_status; /*
                                  * BIT 0: battery module missing
                                  * BIT 1: VBAD
-                                 * BIT 2: temprature high
+                                 * BIT 2: temperature high
                                  * BIT 3: battery pack missing
                                  * BIT 4,5:
                                  *   00 - charge complete
diff --git a/drivers/scsi/megaraid/mbox_defs.h b/drivers/scsi/megaraid/mbox_defs.h
index b25b74764ec3..ce2487a888ed 100644
--- a/drivers/scsi/megaraid/mbox_defs.h
+++ b/drivers/scsi/megaraid/mbox_defs.h
@@ -497,7 +497,7 @@ typedef struct {
  * @inserted_drive              : channel:Id of inserted drive
  * @battery_status              : bit 0: battery module missing
  *                              bit 1: VBAD
- *                              bit 2: temprature high
+ *                              bit 2: temperature high
  *                              bit 3: battery pack missing
  *                              bit 4,5:
  *                                      00 - charge complete
diff --git a/drivers/scsi/megaraid/megaraid_mbox.c b/drivers/scsi/megaraid/megaraid_mbox.c
index fd181c2a8ae4..7f977967b884 100644
--- a/drivers/scsi/megaraid/megaraid_mbox.c
+++ b/drivers/scsi/megaraid/megaraid_mbox.c
@@ -2709,7 +2709,7 @@ megaraid_reset_handler(struct scsi_cmnd *scp)
         }
         else {
                 con_log(CL_ANN, (KERN_NOTICE
-                "megaraid mbox: reset sequence completed sucessfully\n"));
+                "megaraid mbox: reset sequence completed successfully\n"));
         }
 
 
diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
index 55ee014a7e08..efabea1a3ce4 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
@@ -2987,7 +2987,7 @@ _scsih_normalize_sense(char *sense_buffer, struct sense_info *data)
 
 #ifdef CONFIG_SCSI_MPT2SAS_LOGGING
 /**
- * _scsih_scsi_ioc_info - translated non-succesfull SCSI_IO request
+ * _scsih_scsi_ioc_info - translated non-successfull SCSI_IO request
  * @ioc: per adapter object
  * @scmd: pointer to scsi command object
  * @mpi_reply: reply mf payload returned from firmware
diff --git a/drivers/scsi/ncr53c8xx.c b/drivers/scsi/ncr53c8xx.c
index e3c482aa87b5..a2d569828308 100644
--- a/drivers/scsi/ncr53c8xx.c
+++ b/drivers/scsi/ncr53c8xx.c
@@ -6495,7 +6495,7 @@ static void ncr_int_ma (struct ncb *np)
         **      we force a SIR_NEGO_PROTO interrupt (it is a hack that avoids 
         **      bloat for such a should_not_happen situation).
         **      In all other situation, we reset the BUS.
-        **      Are these assumptions reasonnable ? (Wait and see ...)
+        **      Are these assumptions reasonable ? (Wait and see ...)
         */
 unexpected_phase:
         dsp -= 8;
diff --git a/drivers/scsi/nsp32.c b/drivers/scsi/nsp32.c
index 2be7d5b018d2..2c98a6ee973b 100644
--- a/drivers/scsi/nsp32.c
+++ b/drivers/scsi/nsp32.c
@@ -1419,7 +1419,7 @@ static irqreturn_t do_nsp32_isr(int irq, void *dev_id)
                 nsp32_msg(KERN_ERR, "Received unexpected BMCNTERR IRQ! ");
                 /*
                  * TODO: To be implemented improving bus master
-                 * transfer reliablity when BMCNTERR is occurred in
+                 * transfer reliability when BMCNTERR is occurred in
                  * AutoSCSI phase described in specification.
                  */
         }
diff --git a/drivers/scsi/pmcraid.c b/drivers/scsi/pmcraid.c
index 4874dd62a62f..34c6b896a91b 100644
--- a/drivers/scsi/pmcraid.c
+++ b/drivers/scsi/pmcraid.c
@@ -3347,7 +3347,7 @@ static int pmcraid_chr_fasync(int fd, struct file *filep, int mode)
  * @direction : data transfer direction
  *
  * Return value
- *  0 on sucess, non-zero error code on failure
+ *  0 on success, non-zero error code on failure
  */
 static int pmcraid_build_passthrough_ioadls(
         struct pmcraid_cmd *cmd,
@@ -3406,7 +3406,7 @@ static int pmcraid_build_passthrough_ioadls(
  * @direction: data transfer direction
  *
  * Return value
- *  0 on sucess, non-zero error code on failure
+ *  0 on success, non-zero error code on failure
  */
 static void pmcraid_release_passthrough_ioadls(
         struct pmcraid_cmd *cmd,
@@ -3434,7 +3434,7 @@ static void pmcraid_release_passthrough_ioadls(
  * @arg: pointer to pmcraid_passthrough_buffer user buffer
  *
  * Return value
- *  0 on sucess, non-zero error code on failure
+ *  0 on success, non-zero error code on failure
  */
 static long pmcraid_ioctl_passthrough(
         struct pmcraid_instance *pinstance,
diff --git a/drivers/scsi/pmcraid.h b/drivers/scsi/pmcraid.h
index 3441b3f90827..2752b56cad56 100644
--- a/drivers/scsi/pmcraid.h
+++ b/drivers/scsi/pmcraid.h
@@ -771,11 +771,11 @@ static struct pmcraid_ioasc_error pmcraid_ioasc_error_table[] = {
         {0x01180600, IOASC_LOG_LEVEL_MUST,
          "Recovered Error, soft media error, sector reassignment suggested"},
         {0x015D0000, IOASC_LOG_LEVEL_MUST,
-         "Recovered Error, failure prediction thresold exceeded"},
+         "Recovered Error, failure prediction threshold exceeded"},
         {0x015D9200, IOASC_LOG_LEVEL_MUST,
-         "Recovered Error, soft Cache Card Battery error thresold"},
+         "Recovered Error, soft Cache Card Battery error threshold"},
         {0x015D9200, IOASC_LOG_LEVEL_MUST,
-         "Recovered Error, soft Cache Card Battery error thresold"},
+         "Recovered Error, soft Cache Card Battery error threshold"},
         {0x02048000, IOASC_LOG_LEVEL_MUST,
          "Not Ready, IOA Reset Required"},
         {0x02408500, IOASC_LOG_LEVEL_MUST,
diff --git a/drivers/scsi/scsi_netlink.c b/drivers/scsi/scsi_netlink.c
index 723fdecd91bd..0fd6ae6911ad 100644
--- a/drivers/scsi/scsi_netlink.c
+++ b/drivers/scsi/scsi_netlink.c
@@ -613,7 +613,7 @@ EXPORT_SYMBOL_GPL(scsi_nl_send_transport_msg);
  * @data_buf:           pointer to vendor unique data buffer
  *
  * Returns:
- *   0 on succesful return
+ *   0 on successful return
  *   otherwise, failing error code
  *
  * Notes:
diff --git a/drivers/scsi/scsi_transport_sas.c b/drivers/scsi/scsi_transport_sas.c
index fd47cb1bee1b..f27e52d963d3 100644
--- a/drivers/scsi/scsi_transport_sas.c
+++ b/drivers/scsi/scsi_transport_sas.c
@@ -666,7 +666,7 @@ EXPORT_SYMBOL(sas_phy_add);
  *
  * Note:
  *   This function must only be called on a PHY that has not
- *   sucessfully been added using sas_phy_add().
+ *   successfully been added using sas_phy_add().
  */
 void sas_phy_free(struct sas_phy *phy)
 {
@@ -896,7 +896,7 @@ EXPORT_SYMBOL(sas_port_add);
  *
  * Note:
  *   This function must only be called on a PORT that has not
- *   sucessfully been added using sas_port_add().
+ *   successfully been added using sas_port_add().
  */
 void sas_port_free(struct sas_port *port)
 {
@@ -1476,7 +1476,7 @@ EXPORT_SYMBOL(sas_rphy_add);
  *
  * Note:
  *   This function must only be called on a remote
- *   PHY that has not sucessfully been added using
+ *   PHY that has not successfully been added using
  *   sas_rphy_add() (or has been sas_rphy_remove()'d)
  */
 void sas_rphy_free(struct sas_rphy *rphy)
diff --git a/drivers/scsi/sym53c8xx_2/sym_glue.c b/drivers/scsi/sym53c8xx_2/sym_glue.c
index 45374d66d26a..2b38f6ad6e11 100644
--- a/drivers/scsi/sym53c8xx_2/sym_glue.c
+++ b/drivers/scsi/sym53c8xx_2/sym_glue.c
@@ -1864,7 +1864,7 @@ static pci_ers_result_t sym2_io_slot_dump(struct pci_dev *pdev)
  *
  * This routine is similar to sym_set_workarounds(), except
  * that, at this point, we already know that the device was
- * succesfully intialized at least once before, and so most
+ * successfully intialized at least once before, and so most
  * of the steps taken there are un-needed here.
  */
 static void sym2_reset_workarounds(struct pci_dev *pdev)
diff --git a/drivers/scsi/sym53c8xx_2/sym_hipd.c b/drivers/scsi/sym53c8xx_2/sym_hipd.c
index 297deb817a5d..a7bc8b7b09ac 100644
--- a/drivers/scsi/sym53c8xx_2/sym_hipd.c
+++ b/drivers/scsi/sym53c8xx_2/sym_hipd.c
@@ -2692,7 +2692,7 @@ static void sym_int_ma (struct sym_hcb *np)
          *  we force a SIR_NEGO_PROTO interrupt (it is a hack that avoids 
          *  bloat for such a should_not_happen situation).
          *  In all other situation, we reset the BUS.
-         *  Are these assumptions reasonnable ? (Wait and see ...)
+         *  Are these assumptions reasonable ? (Wait and see ...)
          */
 unexpected_phase:
         dsp -= 8;
diff --git a/drivers/scsi/sym53c8xx_2/sym_hipd.h b/drivers/scsi/sym53c8xx_2/sym_hipd.h
index 053e63c86822..5a80cbac3f92 100644
--- a/drivers/scsi/sym53c8xx_2/sym_hipd.h
+++ b/drivers/scsi/sym53c8xx_2/sym_hipd.h
@@ -54,7 +54,7 @@
  *
  *    SYM_OPT_LIMIT_COMMAND_REORDERING
  *        When this option is set, the driver tries to limit tagged 
- *        command reordering to some reasonnable value.
+ *        command reordering to some reasonable value.
  *        (set for Linux)
  */
 #if 0
diff --git a/drivers/scsi/wd7000.c b/drivers/scsi/wd7000.c
index 093610bcfcce..2f6e9d8eaf71 100644
--- a/drivers/scsi/wd7000.c
+++ b/drivers/scsi/wd7000.c
@@ -161,7 +161,7 @@
  *
  * 2003/02/12 - Christoph Hellwig <hch@infradead.org>
  *
- * Cleaned up host template defintion
+ * Cleaned up host template definition
  * Removed now obsolete wd7000.h
  */