26 files changed, 191 insertions, 137 deletions

diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 44728ae3fe77..96a81cd17617 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -501,7 +501,7 @@ config SCSI_ATA_PIIX
         tristate "Intel PIIX/ICH SATA support"
         depends on SCSI_SATA && PCI
         help
-          This option enables support for ICH5 Serial ATA.
+          This option enables support for ICH5/6/7/8 Serial ATA.
           If PATA support was enabled previously, this enables
           support for select Intel PIIX/ICH PATA host controllers.
 
@@ -1169,7 +1169,7 @@ config SCSI_NCR_Q720
           you do not have this SCSI card, so say N.
 
 config SCSI_NCR53C8XX_DEFAULT_TAGS
-        int "  default tagged command queue depth"
+        int "default tagged command queue depth"
         depends on SCSI_ZALON || SCSI_NCR_Q720
         default "8"
         ---help---
@@ -1195,7 +1195,7 @@ config SCSI_NCR53C8XX_DEFAULT_TAGS
           There is no safe option other than using good SCSI devices.
 
 config SCSI_NCR53C8XX_MAX_TAGS
-        int "  maximum number of queued commands"
+        int "maximum number of queued commands"
         depends on SCSI_ZALON || SCSI_NCR_Q720
         default "32"
         ---help---
@@ -1212,7 +1212,7 @@ config SCSI_NCR53C8XX_MAX_TAGS
           There is no safe option and the default answer is recommended.
 
 config SCSI_NCR53C8XX_SYNC
-        int "  synchronous transfers frequency in MHz"
+        int "synchronous transfers frequency in MHz"
         depends on SCSI_ZALON || SCSI_NCR_Q720
         default "20"
         ---help---
@@ -1246,7 +1246,7 @@ config SCSI_NCR53C8XX_SYNC
           terminations and SCSI conformant devices.
 
 config SCSI_NCR53C8XX_PROFILE
-        bool "  enable profiling"
+        bool "enable profiling"
         depends on SCSI_ZALON || SCSI_NCR_Q720
         help
           This option allows you to enable profiling information gathering.
@@ -1257,7 +1257,7 @@ config SCSI_NCR53C8XX_PROFILE
           The normal answer therefore is N.
 
 config SCSI_NCR53C8XX_NO_DISCONNECT
-        bool "  not allow targets to disconnect"
+        bool "not allow targets to disconnect"
         depends on (SCSI_ZALON || SCSI_NCR_Q720) && SCSI_NCR53C8XX_DEFAULT_TAGS=0
         help
           This option is only provided for safety if you suspect some SCSI
diff --git a/drivers/scsi/NCR5380.c b/drivers/scsi/NCR5380.c
index fa57e0b4a5fd..75f2f7ae2a8e 100644
--- a/drivers/scsi/NCR5380.c
+++ b/drivers/scsi/NCR5380.c
@@ -500,7 +500,7 @@ static void NCR5380_print_phase(struct Scsi_Host *instance)
 /* 
  * Function : int should_disconnect (unsigned char cmd)
  *
- * Purpose : decide weather a command would normally disconnect or 
+ * Purpose : decide whether a command would normally disconnect or 
  *      not, since if it won't disconnect we should go to sleep.
  *
  * Input : cmd - opcode of SCSI command
diff --git a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c
index 5ee47555a8af..dd9fb3d91000 100644
--- a/drivers/scsi/advansys.c
+++ b/drivers/scsi/advansys.c
@@ -12374,7 +12374,7 @@ AscInitFromEEP(ASC_DVC_VAR *asc_dvc)
                 ASC_PRINT1(
 "AscInitFromEEP: Failed to re-write EEPROM with %d errors.\n", i);
         } else {
-                ASC_PRINT("AscInitFromEEP: Succesfully re-wrote EEPROM.");
+                ASC_PRINT("AscInitFromEEP: Successfully re-wrote EEPROM.\n");
         }
     }
     return (warn_code);
diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c
index 4bb77f62b3b9..f05946777718 100644
--- a/drivers/scsi/ahci.c
+++ b/drivers/scsi/ahci.c
@@ -48,7 +48,7 @@
 #include <asm/io.h>
 
 #define DRV_NAME        "ahci"
-#define DRV_VERSION     "1.3"
+#define DRV_VERSION     "2.0"
 
 
 enum {
diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c
index 521b718763f6..94b1261a259d 100644
--- a/drivers/scsi/ata_piix.c
+++ b/drivers/scsi/ata_piix.c
@@ -93,7 +93,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME        "ata_piix"
-#define DRV_VERSION     "1.10"
+#define DRV_VERSION     "2.00"
 
 enum {
         PIIX_IOCFG              = 0x54, /* IDE I/O configuration register */
diff --git a/drivers/scsi/dc395x.c b/drivers/scsi/dc395x.c
index 183245254931..58b0748045ee 100644
--- a/drivers/scsi/dc395x.c
+++ b/drivers/scsi/dc395x.c
@@ -3771,7 +3771,7 @@ static void request_sense(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb,
  * @target: The target for the new device.
  * @lun: The lun for the new device.
  *
- * Return the new device if succesfull or NULL on failure.
+ * Return the new device if successful or NULL on failure.
  **/
 static struct DeviceCtlBlk *device_alloc(struct AdapterCtlBlk *acb,
                 u8 target, u8 lun)
diff --git a/drivers/scsi/ibmmca.c b/drivers/scsi/ibmmca.c
index 115f55471ed3..497f6642b2dc 100644
--- a/drivers/scsi/ibmmca.c
+++ b/drivers/scsi/ibmmca.c
@@ -760,7 +760,7 @@ static int device_inquiry(int host_index, int ldn)
                 while (!got_interrupt(host_index))
                         barrier();
 
-                /*if command succesful, break */
+                /*if command successful, break */
                 if ((stat_result(host_index) == IM_SCB_CMD_COMPLETED) || (stat_result(host_index) == IM_SCB_CMD_COMPLETED_WITH_RETRIES))
                         return 1;
         }
@@ -885,7 +885,7 @@ static int immediate_assign(int host_index, unsigned int pun, unsigned int lun,
                 while (!got_interrupt(host_index))
                         barrier();
 
-                /*if command succesful, break */
+                /*if command successful, break */
                 if (stat_result(host_index) == IM_IMMEDIATE_CMD_COMPLETED)
                         return 1;
         }
@@ -921,7 +921,7 @@ static int immediate_feature(int host_index, unsigned int speed, unsigned int ti
                         return 2;
                 } else
                         global_command_error_excuse = 0;
-                /*if command succesful, break */
+                /*if command successful, break */
                 if (stat_result(host_index) == IM_IMMEDIATE_CMD_COMPLETED)
                         return 1;
         }
@@ -959,7 +959,7 @@ static int immediate_reset(int host_index, unsigned int ldn)
                         /* did not work, finish */
                         return 1;
                 }
-                /*if command succesful, break */
+                /*if command successful, break */
                 if (stat_result(host_index) == IM_IMMEDIATE_CMD_COMPLETED)
                         return 1;
         }
diff --git a/drivers/scsi/imm.c b/drivers/scsi/imm.c
index cd2dffdab77a..681bd18493f3 100644
--- a/drivers/scsi/imm.c
+++ b/drivers/scsi/imm.c
@@ -3,9 +3,6 @@
  * 
  * (The IMM is the embedded controller in the ZIP Plus drive.)
  * 
- * Current Maintainer: David Campbell (Perth, Western Australia)
- *                     campbell@torque.net
- *
  * My unoffical company acronym list is 21 pages long:
  *      FLA:    Four letter acronym with built in facility for
  *              future expansion to five letters.
diff --git a/drivers/scsi/imm.h b/drivers/scsi/imm.h
index dc3aebf0e365..ece936ac29c7 100644
--- a/drivers/scsi/imm.h
+++ b/drivers/scsi/imm.h
@@ -2,7 +2,7 @@
 /*  Driver for the Iomega MatchMaker parallel port SCSI HBA embedded in 
  * the Iomega ZIP Plus drive
  * 
- * (c) 1998     David Campbell     campbell@torque.net
+ * (c) 1998     David Campbell
  *
  * Please note that I live in Perth, Western Australia. GMT+0800
  */
diff --git a/drivers/scsi/ips.c b/drivers/scsi/ips.c
index 5353b28b2939..78f2ff736c3e 100644
--- a/drivers/scsi/ips.c
+++ b/drivers/scsi/ips.c
@@ -6438,7 +6438,7 @@ ips_erase_bios(ips_ha_t * ha)
                 /* VPP failure */
                 return (1);
 
-        /* check for succesful flash */
+        /* check for successful flash */
         if (status & 0x30)
                 /* sequence error */
                 return (1);
@@ -6550,7 +6550,7 @@ ips_erase_bios_memio(ips_ha_t * ha)
                 /* VPP failure */
                 return (1);
 
-        /* check for succesful flash */
+        /* check for successful flash */
         if (status & 0x30)
                 /* sequence error */
                 return (1);
diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
index 6c66877be2bf..d1c1c30d123f 100644
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -88,6 +88,10 @@ int libata_fua = 0;
 module_param_named(fua, libata_fua, int, 0444);
 MODULE_PARM_DESC(fua, "FUA support (0=off, 1=on)");
 
+static int ata_probe_timeout = ATA_TMOUT_INTERNAL / HZ;
+module_param(ata_probe_timeout, int, 0444);
+MODULE_PARM_DESC(ata_probe_timeout, "Set ATA probing timeout (seconds)");
+
 MODULE_AUTHOR("Jeff Garzik");
 MODULE_DESCRIPTION("Library module for ATA devices");
 MODULE_LICENSE("GPL");
@@ -777,11 +781,9 @@ void ata_std_dev_select (struct ata_port *ap, unsigned int device)
 void ata_dev_select(struct ata_port *ap, unsigned int device,
                            unsigned int wait, unsigned int can_sleep)
 {
-        if (ata_msg_probe(ap)) {
+        if (ata_msg_probe(ap))
                 ata_port_printk(ap, KERN_INFO, "ata_dev_select: ENTER, ata%u: "
-                                "device %u, wait %u\n",
-                                ap->id, device, wait);
-        }
+                                "device %u, wait %u\n", ap->id, device, wait);
 
         if (wait)
                 ata_wait_idle(ap);
@@ -950,7 +952,8 @@ void ata_port_flush_task(struct ata_port *ap)
          */
         if (!cancel_delayed_work(&ap->port_task)) {
                 if (ata_msg_ctl(ap))
-                        ata_port_printk(ap, KERN_DEBUG, "%s: flush #2\n", __FUNCTION__);
+                        ata_port_printk(ap, KERN_DEBUG, "%s: flush #2\n",
+                                        __FUNCTION__);
                 flush_workqueue(ata_wq);
         }
 
@@ -1059,7 +1062,7 @@ unsigned ata_exec_internal(struct ata_device *dev,
 
         spin_unlock_irqrestore(ap->lock, flags);
 
-        rc = wait_for_completion_timeout(&wait, ATA_TMOUT_INTERNAL);
+        rc = wait_for_completion_timeout(&wait, ata_probe_timeout);
 
         ata_port_flush_task(ap);
 
@@ -1081,7 +1084,7 @@ unsigned ata_exec_internal(struct ata_device *dev,
 
                         if (ata_msg_warn(ap))
                                 ata_dev_printk(dev, KERN_WARNING,
-                                       "qc timeout (cmd 0x%x)\n", command);
+                                        "qc timeout (cmd 0x%x)\n", command);
                 }
 
                 spin_unlock_irqrestore(ap->lock, flags);
@@ -1093,9 +1096,9 @@ unsigned ata_exec_internal(struct ata_device *dev,
 
         if (qc->flags & ATA_QCFLAG_FAILED && !qc->err_mask) {
                 if (ata_msg_warn(ap))
-                        ata_dev_printk(dev, KERN_WARNING, 
+                        ata_dev_printk(dev, KERN_WARNING,
                                 "zero err_mask for failed "
-                               "internal command, assuming AC_ERR_OTHER\n");
+                                "internal command, assuming AC_ERR_OTHER\n");
                 qc->err_mask |= AC_ERR_OTHER;
         }
 
@@ -1132,6 +1135,33 @@ unsigned ata_exec_internal(struct ata_device *dev,
 }
 
 /**
+ *      ata_do_simple_cmd - execute simple internal command
+ *      @dev: Device to which the command is sent
+ *      @cmd: Opcode to execute
+ *
+ *      Execute a 'simple' command, that only consists of the opcode
+ *      'cmd' itself, without filling any other registers
+ *
+ *      LOCKING:
+ *      Kernel thread context (may sleep).
+ *
+ *      RETURNS:
+ *      Zero on success, AC_ERR_* mask on failure
+ */
+unsigned int ata_do_simple_cmd(struct ata_device *dev, u8 cmd)
+{
+        struct ata_taskfile tf;
+
+        ata_tf_init(dev, &tf);
+
+        tf.command = cmd;
+        tf.flags |= ATA_TFLAG_DEVICE;
+        tf.protocol = ATA_PROT_NODATA;
+
+        return ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0);
+}
+
+/**
  *      ata_pio_need_iordy      -       check if iordy needed
  *      @adev: ATA device
  *
@@ -1193,8 +1223,8 @@ int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class,
         int rc;
 
         if (ata_msg_ctl(ap))
-                ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER, host %u, dev %u\n", 
-                                __FUNCTION__, ap->id, dev->devno);
+                ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER, host %u, dev %u\n",
+                               __FUNCTION__, ap->id, dev->devno);
 
         ata_dev_select(ap, dev->devno, 1, 1); /* select device 0/1 */
 
@@ -1263,9 +1293,9 @@ int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class,
         return 0;
 
  err_out:
-        if (ata_msg_warn(ap)) 
+        if (ata_msg_warn(ap))
                 ata_dev_printk(dev, KERN_WARNING, "failed to IDENTIFY "
-                       "(%s, err_mask=0x%x)\n", reason, err_mask);
+                               "(%s, err_mask=0x%x)\n", reason, err_mask);
         return rc;
 }
 
@@ -1318,19 +1348,21 @@ int ata_dev_configure(struct ata_device *dev, int print_info)
         int i, rc;
 
         if (!ata_dev_enabled(dev) && ata_msg_info(ap)) {
-                ata_dev_printk(dev, KERN_INFO, "%s: ENTER/EXIT (host %u, dev %u) -- nodev\n",
-                        __FUNCTION__, ap->id, dev->devno);
+                ata_dev_printk(dev, KERN_INFO,
+                               "%s: ENTER/EXIT (host %u, dev %u) -- nodev\n",
+                               __FUNCTION__, ap->id, dev->devno);
                 return 0;
         }
 
         if (ata_msg_probe(ap))
-                ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER, host %u, dev %u\n", 
-                        __FUNCTION__, ap->id, dev->devno);
+                ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER, host %u, dev %u\n",
+                               __FUNCTION__, ap->id, dev->devno);
 
         /* print device capabilities */
         if (ata_msg_probe(ap))
-                ata_dev_printk(dev, KERN_DEBUG, "%s: cfg 49:%04x 82:%04x 83:%04x "
-                               "84:%04x 85:%04x 86:%04x 87:%04x 88:%04x\n",
+                ata_dev_printk(dev, KERN_DEBUG,
+                               "%s: cfg 49:%04x 82:%04x 83:%04x 84:%04x "
+                               "85:%04x 86:%04x 87:%04x 88:%04x\n",
                                __FUNCTION__,
                                id[49], id[82], id[83], id[84],
                                id[85], id[86], id[87], id[88]);
@@ -1402,14 +1434,16 @@ int ata_dev_configure(struct ata_device *dev, int print_info)
                                         ata_id_major_version(id),
                                         ata_mode_string(xfer_mask),
                                         (unsigned long long)dev->n_sectors,
-                                        dev->cylinders, dev->heads, dev->sectors);
+                                        dev->cylinders, dev->heads,
+                                        dev->sectors);
                 }
 
                 if (dev->id[59] & 0x100) {
                         dev->multi_count = dev->id[59] & 0xff;
                         if (ata_msg_info(ap))
-                                ata_dev_printk(dev, KERN_INFO, "ata%u: dev %u multi count %u\n",
-                                ap->id, dev->devno, dev->multi_count);
+                                ata_dev_printk(dev, KERN_INFO,
+                                        "ata%u: dev %u multi count %u\n",
+                                        ap->id, dev->devno, dev->multi_count);
                 }
 
                 dev->cdb_len = 16;
@@ -1422,8 +1456,8 @@ int ata_dev_configure(struct ata_device *dev, int print_info)
                 rc = atapi_cdb_len(id);
                 if ((rc < 12) || (rc > ATAPI_CDB_LEN)) {
                         if (ata_msg_warn(ap))
-                                ata_dev_printk(dev, KERN_WARNING, 
-                                        "unsupported CDB len\n");
+                                ata_dev_printk(dev, KERN_WARNING,
+                                               "unsupported CDB len\n");
                         rc = -EINVAL;
                         goto err_out_nosup;
                 }
@@ -1466,8 +1500,8 @@ int ata_dev_configure(struct ata_device *dev, int print_info)
 
 err_out_nosup:
         if (ata_msg_probe(ap))
-                ata_dev_printk(dev, KERN_DEBUG, 
-                                "%s: EXIT, err\n", __FUNCTION__);
+                ata_dev_printk(dev, KERN_DEBUG,
+                               "%s: EXIT, err\n", __FUNCTION__);
         return rc;
 }
 
@@ -3527,7 +3561,7 @@ void swap_buf_le16(u16 *buf, unsigned int buf_words)
  *      Inherited from caller.
  */
 
-void ata_mmio_data_xfer(struct ata_device *adev, unsigned char *buf, 
+void ata_mmio_data_xfer(struct ata_device *adev, unsigned char *buf,
                         unsigned int buflen, int write_data)
 {
         struct ata_port *ap = adev->ap;
@@ -3573,7 +3607,7 @@ void ata_mmio_data_xfer(struct ata_device *adev, unsigned char *buf,
  *      Inherited from caller.
  */
 
-void ata_pio_data_xfer(struct ata_device *adev, unsigned char *buf, 
+void ata_pio_data_xfer(struct ata_device *adev, unsigned char *buf,
                        unsigned int buflen, int write_data)
 {
         struct ata_port *ap = adev->ap;
@@ -3607,7 +3641,7 @@ void ata_pio_data_xfer(struct ata_device *adev, unsigned char *buf,
  *      @buflen: buffer length
  *      @write_data: read/write
  *
- *      Transfer data from/to the device data register by PIO. Do the 
+ *      Transfer data from/to the device data register by PIO. Do the
  *      transfer with interrupts disabled.
  *
  *      LOCKING:
@@ -4946,31 +4980,9 @@ int ata_port_offline(struct ata_port *ap)
         return 0;
 }
 
-/*
- * Execute a 'simple' command, that only consists of the opcode 'cmd' itself,
- * without filling any other registers
- */
-static int ata_do_simple_cmd(struct ata_device *dev, u8 cmd)
-{
-        struct ata_taskfile tf;
-        int err;
-
-        ata_tf_init(dev, &tf);
-
-        tf.command = cmd;
-        tf.flags |= ATA_TFLAG_DEVICE;
-        tf.protocol = ATA_PROT_NODATA;
-
-        err = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0);
-        if (err)
-                ata_dev_printk(dev, KERN_ERR, "%s: ata command failed: %d\n",
-                               __FUNCTION__, err);
-
-        return err;
-}
-
-static int ata_flush_cache(struct ata_device *dev)
+int ata_flush_cache(struct ata_device *dev)
 {
+        unsigned int err_mask;
         u8 cmd;
 
         if (!ata_try_flush_cache(dev))
@@ -4981,17 +4993,41 @@ static int ata_flush_cache(struct ata_device *dev)
         else
                 cmd = ATA_CMD_FLUSH;
 
-        return ata_do_simple_cmd(dev, cmd);
+        err_mask = ata_do_simple_cmd(dev, cmd);
+        if (err_mask) {
+                ata_dev_printk(dev, KERN_ERR, "failed to flush cache\n");
+                return -EIO;
+        }
+
+        return 0;
 }
 
 static int ata_standby_drive(struct ata_device *dev)
 {
-        return ata_do_simple_cmd(dev, ATA_CMD_STANDBYNOW1);
+        unsigned int err_mask;
+
+        err_mask = ata_do_simple_cmd(dev, ATA_CMD_STANDBYNOW1);
+        if (err_mask) {
+                ata_dev_printk(dev, KERN_ERR, "failed to standby drive "
+                               "(err_mask=0x%x)\n", err_mask);
+                return -EIO;
+        }
+
+        return 0;
 }
 
 static int ata_start_drive(struct ata_device *dev)
 {
-        return ata_do_simple_cmd(dev, ATA_CMD_IDLEIMMEDIATE);
+        unsigned int err_mask;
+
+        err_mask = ata_do_simple_cmd(dev, ATA_CMD_IDLEIMMEDIATE);
+        if (err_mask) {
+                ata_dev_printk(dev, KERN_ERR, "failed to start drive "
+                               "(err_mask=0x%x)\n", err_mask);
+                return -EIO;
+        }
+
+        return 0;
 }
 
 /**
@@ -5212,7 +5248,7 @@ static void ata_host_init(struct ata_port *ap, struct Scsi_Host *host,
         ap->msg_enable = 0x00FF;
 #elif defined(ATA_DEBUG)
         ap->msg_enable = ATA_MSG_DRV | ATA_MSG_INFO | ATA_MSG_CTL | ATA_MSG_WARN | ATA_MSG_ERR;
-#else 
+#else
         ap->msg_enable = ATA_MSG_DRV | ATA_MSG_ERR | ATA_MSG_WARN;
 #endif
 
@@ -5709,6 +5745,7 @@ int ata_pci_device_resume(struct pci_dev *pdev)
 
 static int __init ata_init(void)
 {
+        ata_probe_timeout *= HZ;
         ata_wq = create_workqueue("ata");
         if (!ata_wq)
                 return -ENOMEM;
@@ -5733,7 +5770,7 @@ module_init(ata_init);
 module_exit(ata_exit);
 
 static unsigned long ratelimit_time;
-static spinlock_t ata_ratelimit_lock = SPIN_LOCK_UNLOCKED;
+static DEFINE_SPINLOCK(ata_ratelimit_lock);
 
 int ata_ratelimit(void)
 {
diff --git a/drivers/scsi/libata-eh.c b/drivers/scsi/libata-eh.c
index 823385981a7a..bf5a72aca8a4 100644
--- a/drivers/scsi/libata-eh.c
+++ b/drivers/scsi/libata-eh.c
@@ -93,6 +93,38 @@ static int ata_ering_map(struct ata_ering *ering,
         return rc;
 }
 
+static unsigned int ata_eh_dev_action(struct ata_device *dev)
+{
+        struct ata_eh_context *ehc = &dev->ap->eh_context;
+
+        return ehc->i.action | ehc->i.dev_action[dev->devno];
+}
+
+static void ata_eh_clear_action(struct ata_device *dev,
+                                struct ata_eh_info *ehi, unsigned int action)
+{
+        int i;
+
+        if (!dev) {
+                ehi->action &= ~action;
+                for (i = 0; i < ATA_MAX_DEVICES; i++)
+                        ehi->dev_action[i] &= ~action;
+        } else {
+                /* doesn't make sense for port-wide EH actions */
+                WARN_ON(!(action & ATA_EH_PERDEV_MASK));
+
+                /* break ehi->action into ehi->dev_action */
+                if (ehi->action & action) {
+                        for (i = 0; i < ATA_MAX_DEVICES; i++)
+                                ehi->dev_action[i] |= ehi->action & action;
+                        ehi->action &= ~action;
+                }
+
+                /* turn off the specified per-dev action */
+                ehi->dev_action[dev->devno] &= ~action;
+        }
+}
+
 /**
  *      ata_scsi_timed_out - SCSI layer time out callback
  *      @cmd: timed out SCSI command
@@ -702,32 +734,11 @@ static void ata_eh_detach_dev(struct ata_device *dev)
                 ap->flags |= ATA_FLAG_SCSI_HOTPLUG;
         }
 
-        spin_unlock_irqrestore(ap->lock, flags);
-}
-
-static void ata_eh_clear_action(struct ata_device *dev,
-                                struct ata_eh_info *ehi, unsigned int action)
-{
-        int i;
+        /* clear per-dev EH actions */
+        ata_eh_clear_action(dev, &ap->eh_info, ATA_EH_PERDEV_MASK);
+        ata_eh_clear_action(dev, &ap->eh_context.i, ATA_EH_PERDEV_MASK);
 
-        if (!dev) {
-                ehi->action &= ~action;
-                for (i = 0; i < ATA_MAX_DEVICES; i++)
-                        ehi->dev_action[i] &= ~action;
-        } else {
-                /* doesn't make sense for port-wide EH actions */
-                WARN_ON(!(action & ATA_EH_PERDEV_MASK));
-
-                /* break ehi->action into ehi->dev_action */
-                if (ehi->action & action) {
-                        for (i = 0; i < ATA_MAX_DEVICES; i++)
-                                ehi->dev_action[i] |= ehi->action & action;
-                        ehi->action &= ~action;
-                }
-
-                /* turn off the specified per-dev action */
-                ehi->dev_action[dev->devno] &= ~action;
-        }
+        spin_unlock_irqrestore(ap->lock, flags);
 }
 
 /**
@@ -1592,7 +1603,7 @@ static int ata_eh_revalidate_and_attach(struct ata_port *ap,
                 unsigned int action;
 
                 dev = &ap->device[i];
-                action = ehc->i.action | ehc->i.dev_action[dev->devno];
+                action = ata_eh_dev_action(dev);
 
                 if (action & ATA_EH_REVALIDATE && ata_dev_enabled(dev)) {
                         if (ata_port_offline(ap)) {
diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c
index 93d18a74c401..2915bca691e8 100644
--- a/drivers/scsi/libata-scsi.c
+++ b/drivers/scsi/libata-scsi.c
@@ -222,9 +222,7 @@ int ata_cmd_ioctl(struct scsi_device *scsidev, void __user *arg)
          && copy_to_user(arg + sizeof(args), argbuf, argsize))
                 rc = -EFAULT;
 error:
-        if (argbuf)
-                kfree(argbuf);
-
+        kfree(argbuf);
         return rc;
 }
 
diff --git a/drivers/scsi/libata.h b/drivers/scsi/libata.h
index bdd488897096..c325679d9b54 100644
--- a/drivers/scsi/libata.h
+++ b/drivers/scsi/libata.h
@@ -29,7 +29,7 @@
 #define __LIBATA_H__
 
 #define DRV_NAME        "libata"
-#define DRV_VERSION     "1.30"  /* must be exactly four chars */
+#define DRV_VERSION     "2.00"  /* must be exactly four chars */
 
 struct ata_scsi_args {
         struct ata_device       *dev;
@@ -50,6 +50,7 @@ extern void ata_port_flush_task(struct ata_port *ap);
 extern unsigned ata_exec_internal(struct ata_device *dev,
                                   struct ata_taskfile *tf, const u8 *cdb,
                                   int dma_dir, void *buf, unsigned int buflen);
+extern unsigned int ata_do_simple_cmd(struct ata_device *dev, u8 cmd);
 extern int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class,
                            int post_reset, u16 *id);
 extern int ata_dev_configure(struct ata_device *dev, int print_info);
@@ -64,6 +65,7 @@ extern int ata_check_atapi_dma(struct ata_queued_cmd *qc);
 extern void ata_dev_select(struct ata_port *ap, unsigned int device,
                            unsigned int wait, unsigned int can_sleep);
 extern void swap_buf_le16(u16 *buf, unsigned int buf_words);
+extern int ata_flush_cache(struct ata_device *dev);
 extern void ata_dev_init(struct ata_device *dev);
 extern int ata_task_ioctl(struct scsi_device *scsidev, void __user *arg);
 extern int ata_cmd_ioctl(struct scsi_device *scsidev, void __user *arg);
diff --git a/drivers/scsi/ncr53c8xx.c b/drivers/scsi/ncr53c8xx.c
index 6ab035590ee6..b28712df0b77 100644
--- a/drivers/scsi/ncr53c8xx.c
+++ b/drivers/scsi/ncr53c8xx.c
@@ -5118,8 +5118,7 @@ static void ncr_ccb_skipped(struct ncb *np, struct ccb *cp)
                 cp->host_status &= ~HS_SKIPMASK;
                 cp->start.schedule.l_paddr = 
                         cpu_to_scr(NCB_SCRIPT_PHYS (np, select));
-                list_del(&cp->link_ccbq);
-                list_add_tail(&cp->link_ccbq, &lp->skip_ccbq);
+                list_move_tail(&cp->link_ccbq, &lp->skip_ccbq);
                 if (cp->queued) {
                         --lp->queuedccbs;
                 }
diff --git a/drivers/scsi/ppa.c b/drivers/scsi/ppa.c
index 108910f512e4..d58ac5ad509d 100644
--- a/drivers/scsi/ppa.c
+++ b/drivers/scsi/ppa.c
@@ -6,8 +6,6 @@
  * (c) 1995,1996 Grant R. Guenther, grant@torque.net,
  * under the terms of the GNU General Public License.
  * 
- * Current Maintainer: David Campbell (Perth, Western Australia, GMT+0800)
- *                     campbell@torque.net
  */
 
 #include <linux/config.h>
diff --git a/drivers/scsi/ppa.h b/drivers/scsi/ppa.h
index f6e1a1574bb8..7511df3588e4 100644
--- a/drivers/scsi/ppa.h
+++ b/drivers/scsi/ppa.h
@@ -2,7 +2,7 @@
  * the Iomega ZIP drive
  * 
  * (c) 1996     Grant R. Guenther  grant@torque.net
- *              David Campbell     campbell@torque.net
+ *              David Campbell
  *
  *      All comments to David.
  */
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index ce32322f1e19..ce74a6025a07 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -2347,8 +2347,7 @@ qla2x00_configure_fabric(scsi_qla_host_t *ha)
                         }
 
                         /* Remove device from the new list and add it to DB */
-                        list_del(&fcport->list);
-                        list_add_tail(&fcport->list, &ha->fcports);
+                        list_move_tail(&fcport->list, &ha->fcports);
 
                         /* Login and update database */
                         qla2x00_fabric_dev_login(ha, fcport, &next_loopid);
diff --git a/drivers/scsi/sata_nv.c b/drivers/scsi/sata_nv.c
index d18e7e0932ef..5cc42c6054eb 100644
--- a/drivers/scsi/sata_nv.c
+++ b/drivers/scsi/sata_nv.c
@@ -44,7 +44,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME                        "sata_nv"
-#define DRV_VERSION                     "0.9"
+#define DRV_VERSION                     "2.0"
 
 enum {
         NV_PORTS                        = 2,
diff --git a/drivers/scsi/sata_sil.c b/drivers/scsi/sata_sil.c
index bc9f918a7f28..51d86d750e84 100644
--- a/drivers/scsi/sata_sil.c
+++ b/drivers/scsi/sata_sil.c
@@ -46,12 +46,13 @@
 #include <linux/libata.h>
 
 #define DRV_NAME        "sata_sil"
-#define DRV_VERSION     "1.0"
+#define DRV_VERSION     "2.0"
 
 enum {
         /*
          * host flags
          */
+        SIL_FLAG_NO_SATA_IRQ    = (1 << 28),
         SIL_FLAG_RERR_ON_DMA_ACT = (1 << 29),
         SIL_FLAG_MOD15WRITE     = (1 << 30),
 
@@ -62,8 +63,9 @@ enum {
          * Controller IDs
          */
         sil_3112                = 0,
-        sil_3512                = 1,
-        sil_3114                = 2,
+        sil_3112_no_sata_irq    = 1,
+        sil_3512                = 2,
+        sil_3114                = 3,
 
         /*
          * Register offsets
@@ -123,8 +125,8 @@ static const struct pci_device_id sil_pci_tbl[] = {
         { 0x1095, 0x3512, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3512 },
         { 0x1095, 0x3114, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3114 },
         { 0x1002, 0x436e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 },
-        { 0x1002, 0x4379, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 },
-        { 0x1002, 0x437a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 },
+        { 0x1002, 0x4379, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112_no_sata_irq },
+        { 0x1002, 0x437a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112_no_sata_irq },
         { }     /* terminate list */
 };
 
@@ -217,6 +219,16 @@ static const struct ata_port_info sil_port_info[] = {
                 .udma_mask      = 0x3f,                 /* udma0-5 */
                 .port_ops       = &sil_ops,
         },
+        /* sil_3112_no_sata_irq */
+        {
+                .sht            = &sil_sht,
+                .host_flags     = SIL_DFL_HOST_FLAGS | SIL_FLAG_MOD15WRITE |
+                                  SIL_FLAG_NO_SATA_IRQ,
+                .pio_mask       = 0x1f,                 /* pio0-4 */
+                .mwdma_mask     = 0x07,                 /* mwdma0-2 */
+                .udma_mask      = 0x3f,                 /* udma0-5 */
+                .port_ops       = &sil_ops,
+        },
         /* sil_3512 */
         {
                 .sht            = &sil_sht,
@@ -437,6 +449,10 @@ static irqreturn_t sil_interrupt(int irq, void *dev_instance,
                 if (unlikely(!ap || ap->flags & ATA_FLAG_DISABLED))
                         continue;
 
+                /* turn off SATA_IRQ if not supported */
+                if (ap->flags & SIL_FLAG_NO_SATA_IRQ)
+                        bmdma2 &= ~SIL_DMA_SATA_IRQ;
+
                 if (bmdma2 == 0xffffffff ||
                     !(bmdma2 & (SIL_DMA_COMPLETE | SIL_DMA_SATA_IRQ)))
                         continue;
@@ -474,8 +490,9 @@ static void sil_thaw(struct ata_port *ap)
         ata_chk_status(ap);
         ata_bmdma_irq_clear(ap);
 
-        /* turn on SATA IRQ */
-        writel(SIL_SIEN_N, mmio_base + sil_port[ap->port_no].sien);
+        /* turn on SATA IRQ if supported */
+        if (!(ap->flags & SIL_FLAG_NO_SATA_IRQ))
+                writel(SIL_SIEN_N, mmio_base + sil_port[ap->port_no].sien);
 
         /* turn on IRQ */
         tmp = readl(mmio_base + SIL_SYSCFG);
diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c
index c8b477c67247..b5f8fa955679 100644
--- a/drivers/scsi/sata_sil24.c
+++ b/drivers/scsi/sata_sil24.c
@@ -31,7 +31,7 @@
 #include <asm/io.h>
 
 #define DRV_NAME        "sata_sil24"
-#define DRV_VERSION     "0.24"
+#define DRV_VERSION     "0.3"
 
 /*
  * Port request block (PRB) 32 bytes
diff --git a/drivers/scsi/sata_svw.c b/drivers/scsi/sata_svw.c
index c94b870cf378..7566c2cabaf7 100644
--- a/drivers/scsi/sata_svw.c
+++ b/drivers/scsi/sata_svw.c
@@ -54,7 +54,7 @@
 #endif /* CONFIG_PPC_OF */
 
 #define DRV_NAME        "sata_svw"
-#define DRV_VERSION     "1.8"
+#define DRV_VERSION     "2.0"
 
 enum {
         /* Taskfile registers offsets */
diff --git a/drivers/scsi/sata_uli.c b/drivers/scsi/sata_uli.c
index f668c997e9af..64f3c1aeed21 100644
--- a/drivers/scsi/sata_uli.c
+++ b/drivers/scsi/sata_uli.c
@@ -37,7 +37,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME        "sata_uli"
-#define DRV_VERSION     "0.6"
+#define DRV_VERSION     "1.0"
 
 enum {
         uli_5289                = 0,
diff --git a/drivers/scsi/sata_via.c b/drivers/scsi/sata_via.c
index 322890b400a6..67c3d2999775 100644
--- a/drivers/scsi/sata_via.c
+++ b/drivers/scsi/sata_via.c
@@ -47,7 +47,7 @@
 #include <asm/io.h>
 
 #define DRV_NAME        "sata_via"
-#define DRV_VERSION     "1.2"
+#define DRV_VERSION     "2.0"
 
 enum board_ids_enum {
         vt6420,
diff --git a/drivers/scsi/sata_vsc.c b/drivers/scsi/sata_vsc.c
index 6d0c4f18e652..616fd9634b4b 100644
--- a/drivers/scsi/sata_vsc.c
+++ b/drivers/scsi/sata_vsc.c
@@ -47,7 +47,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME        "sata_vsc"
-#define DRV_VERSION     "1.2"
+#define DRV_VERSION     "2.0"
 
 enum {
         /* Interrupt register offsets (from chip base address) */
@@ -443,16 +443,12 @@ err_out:
 }
 
 
-/*
- * Intel 31244 is supposed to be identical.
- * Compatibility is untested as of yet.
- */
 static const struct pci_device_id vsc_sata_pci_tbl[] = {
-        { PCI_VENDOR_ID_VITESSE, PCI_DEVICE_ID_VITESSE_VSC7174,
+        { PCI_VENDOR_ID_VITESSE, 0x7174,
           PCI_ANY_ID, PCI_ANY_ID, 0x10600, 0xFFFFFF, 0 },
-        { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_GD31244,
+        { PCI_VENDOR_ID_INTEL, 0x3200,
           PCI_ANY_ID, PCI_ANY_ID, 0x10600, 0xFFFFFF, 0 },
-        { }
+        { }     /* terminate list */
 };
 
 
diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c
index 1272dd249af3..b5218fc0ac86 100644
--- a/drivers/scsi/st.c
+++ b/drivers/scsi/st.c
@@ -2818,7 +2818,7 @@ static int st_int_ioctl(struct scsi_tape *STp, unsigned int cmd_in, unsigned lon
                     (cmdstatp->sense_hdr.sense_key == NO_SENSE ||
                      cmdstatp->sense_hdr.sense_key == RECOVERED_ERROR) &&
                     undone == 0) {
-                        ioctl_result = 0;       /* EOF written succesfully at EOM */
+                        ioctl_result = 0;       /* EOF written successfully at EOM */
                         if (fileno >= 0)
                                 fileno++;
                         STps->drv_file = fileno;