4 files changed, 16 insertions, 24 deletions

diff --git a/drivers/scsi/sym53c8xx_2/sym_fw.c b/drivers/scsi/sym53c8xx_2/sym_fw.c
index 9916a2a22558..2be0ae17e06c 100644
--- a/drivers/scsi/sym53c8xx_2/sym_fw.c
+++ b/drivers/scsi/sym53c8xx_2/sym_fw.c
@@ -206,13 +206,13 @@ sym_fw2_patch(struct sym_hcb *np)
          *  they are not desirable. See `sym_fw2.h' for more details.
          */
         if (!(np->device_id == PCI_DEVICE_ID_LSI_53C1010_66 &&
-              np->revision_id < 0x1 &&
+              np->s.device->revision < 0x1 &&
               np->pciclk_khz < 60000)) {
                 scripta0->datao_phase[0] = cpu_to_scr(SCR_NO_OP);
                 scripta0->datao_phase[1] = cpu_to_scr(0);
         }
-        if (!(np->device_id == PCI_DEVICE_ID_LSI_53C1010_33 &&
-              /* np->revision_id < 0xff */ 1)) {
+        if (!(np->device_id == PCI_DEVICE_ID_LSI_53C1010_33 /* &&
+              np->s.device->revision < 0xff */)) {
                 scripta0->sel_done[0] = cpu_to_scr(SCR_NO_OP);
                 scripta0->sel_done[1] = cpu_to_scr(0);
         }
diff --git a/drivers/scsi/sym53c8xx_2/sym_glue.c b/drivers/scsi/sym53c8xx_2/sym_glue.c
index 67a577db5d18..3ed3ed86d350 100644
--- a/drivers/scsi/sym53c8xx_2/sym_glue.c
+++ b/drivers/scsi/sym53c8xx_2/sym_glue.c
@@ -1254,8 +1254,8 @@ static int sym_host_info(struct sym_hcb *np, char *ptr, off_t offset, int len)
         info.pos        = 0;
 
         copy_info(&info, "Chip " NAME53C "%s, device id 0x%x, "
-                         "revision id 0x%x\n",
-                         np->s.chip_name, np->device_id, np->revision_id);
+                         "revision id 0x%x\n", np->s.chip_name,
+                         np->device_id, np->s.device->revision);
         copy_info(&info, "At PCI address %s, IRQ " IRQ_FMT "\n",
                 pci_name(np->s.device), IRQ_PRM(np->s.device->irq));
         copy_info(&info, "Min. period factor %d, %s SCSI BUS%s\n",
@@ -1368,10 +1368,9 @@ static struct Scsi_Host * __devinit sym_attach(struct scsi_host_template *tpnt,
         unsigned long flags;
         struct sym_fw *fw;
 
-        printk(KERN_INFO
-                "sym%d: <%s> rev 0x%x at pci %s irq " IRQ_FMT "\n",
-                unit, dev->chip.name, dev->chip.revision_id,
-                pci_name(pdev), IRQ_PRM(pdev->irq));
+        printk(KERN_INFO "sym%d: <%s> rev 0x%x at pci %s irq " IRQ_FMT "\n",
+                unit, dev->chip.name, pdev->revision, pci_name(pdev),
+                IRQ_PRM(pdev->irq));
 
         /*
          *  Get the firmware for this chip.
@@ -1412,7 +1411,6 @@ static struct Scsi_Host * __devinit sym_attach(struct scsi_host_template *tpnt,
         np->s.device    = pdev;
         np->s.unit      = unit;
         np->device_id   = dev->chip.device_id;
-        np->revision_id = dev->chip.revision_id;
         np->features    = dev->chip.features;
         np->clock_divn  = dev->chip.nr_divisor;
         np->maxoffs     = dev->chip.offset_max;
@@ -1500,7 +1498,7 @@ static struct Scsi_Host * __devinit sym_attach(struct scsi_host_template *tpnt,
         instance->transportt    = sym2_transport_template;
 
         /* 53c896 rev 1 errata: DMA may not cross 16MB boundary */
-        if (pdev->device == PCI_DEVICE_ID_NCR_53C896 && np->revision_id < 2)
+        if (pdev->device == PCI_DEVICE_ID_NCR_53C896 && pdev->revision < 2)
                 instance->dma_boundary = 0xFFFFFF;
 
         spin_unlock_irqrestore(instance->host_lock, flags);
@@ -1545,7 +1543,6 @@ static int __devinit sym_check_supported(struct sym_device *device)
 {
         struct sym_chip *chip;
         struct pci_dev *pdev = device->pdev;
-        u_char revision;
         unsigned long io_port = pci_resource_start(pdev, 0);
         int i;
 
@@ -1565,14 +1562,12 @@ static int __devinit sym_check_supported(struct sym_device *device)
          * to our device structure so we can make it match the actual device
          * and options.
          */
-        pci_read_config_byte(pdev, PCI_CLASS_REVISION, &revision);
-        chip = sym_lookup_chip_table(pdev->device, revision);
+        chip = sym_lookup_chip_table(pdev->device, pdev->revision);
         if (!chip) {
                 dev_info(&pdev->dev, "device not supported\n");
                 return -ENODEV;
         }
         memcpy(&device->chip, chip, sizeof(device->chip));
-        device->chip.revision_id = revision;
 
         return 0;
 }
@@ -1613,7 +1608,7 @@ static int __devinit sym_set_workarounds(struct sym_device *device)
          *  We must ensure the chip will use WRITE AND INVALIDATE.
          *  The revision number limit is for now arbitrary.
          */
-        if (pdev->device == PCI_DEVICE_ID_NCR_53C896 && chip->revision_id < 0x4) {
+        if (pdev->device == PCI_DEVICE_ID_NCR_53C896 && pdev->revision < 0x4) {
                 chip->features  |= (FE_WRIE | FE_CLSE);
         }
 
@@ -1905,12 +1900,10 @@ static pci_ers_result_t sym2_io_slot_dump(struct pci_dev *pdev)
  */
 static void sym2_reset_workarounds(struct pci_dev *pdev)
 {
-        u_char revision;
         u_short status_reg;
         struct sym_chip *chip;
 
-        pci_read_config_byte(pdev, PCI_CLASS_REVISION, &revision);
-        chip = sym_lookup_chip_table(pdev->device, revision);
+        chip = sym_lookup_chip_table(pdev->device, pdev->revision);
 
         /* Work around for errant bit in 895A, in a fashion
          * similar to what is done in sym_set_workarounds().
diff --git a/drivers/scsi/sym53c8xx_2/sym_hipd.c b/drivers/scsi/sym53c8xx_2/sym_hipd.c
index af24c447b195..9f4198ce845e 100644
--- a/drivers/scsi/sym53c8xx_2/sym_hipd.c
+++ b/drivers/scsi/sym53c8xx_2/sym_hipd.c
@@ -805,7 +805,7 @@ static int sym_prepare_setting(struct Scsi_Host *shost, struct sym_hcb *np, stru
          *  are used. Disable internal cycles.
          */
         if (np->device_id == PCI_DEVICE_ID_LSI_53C1010_33 &&
-            np->revision_id < 0x1)
+            np->s.device->revision < 0x1)
                 np->rv_ccntl0   |=  DILS;
 
         /*
@@ -829,9 +829,9 @@ static int sym_prepare_setting(struct Scsi_Host *shost, struct sym_hcb *np, stru
          *  LOAD/STORE instructions does not need this work-around.
          */
         if ((np->device_id == PCI_DEVICE_ID_NCR_53C810 &&
-             np->revision_id >= 0x10 && np->revision_id <= 0x11) ||
+             np->s.device->revision >= 0x10 && np->s.device->revision <= 0x11) ||
             (np->device_id == PCI_DEVICE_ID_NCR_53C860 &&
-             np->revision_id <= 0x1))
+             np->s.device->revision <= 0x1))
                 np->features &= ~(FE_WRIE|FE_ERL|FE_ERMP);
 
         /*
@@ -1809,7 +1809,7 @@ void sym_start_up (struct sym_hcb *np, int reason)
          *  I just don't want. :)
          */
         if (np->device_id == PCI_DEVICE_ID_LSI_53C1010_33 &&
-            np->revision_id < 1)
+            np->s.device->revision < 1)
                 OUTB(np, nc_stest1, INB(np, nc_stest1) | 0x30);
 
         /*
diff --git a/drivers/scsi/sym53c8xx_2/sym_hipd.h b/drivers/scsi/sym53c8xx_2/sym_hipd.h
index 79ab6a177039..3aa8060a4d2a 100644
--- a/drivers/scsi/sym53c8xx_2/sym_hipd.h
+++ b/drivers/scsi/sym53c8xx_2/sym_hipd.h
@@ -919,7 +919,6 @@ struct sym_hcb {
          *  General controller parameters and configuration.
          */
         u_short device_id;      /* PCI device id                */
-        u_char  revision_id;    /* PCI device revision id       */
         u_int   features;       /* Chip features map            */
         u_char  myaddr;         /* SCSI id of the adapter       */
         u_char  maxburst;       /* log base 2 of dwords burst   */