1 files changed, 38 insertions, 41 deletions

diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c
index 22f8140598ba..169bc595648a 100644
--- a/drivers/scsi/scsi_error.c
+++ b/drivers/scsi/scsi_error.c
@@ -62,7 +62,7 @@ void scsi_eh_wakeup(struct Scsi_Host *shost)
  * @shost:      SCSI host to invoke error handling on.
  *
  * Schedule SCSI EH without scmd.
- **/
+ */
 void scsi_schedule_eh(struct Scsi_Host *shost)
 {
         unsigned long flags;
@@ -86,7 +86,7 @@ EXPORT_SYMBOL_GPL(scsi_schedule_eh);
  *
  * Return value:
  *      0 on failure.
- **/
+ */
 int scsi_eh_scmd_add(struct scsi_cmnd *scmd, int eh_flag)
 {
         struct Scsi_Host *shost = scmd->device->host;
@@ -121,7 +121,7 @@ int scsi_eh_scmd_add(struct scsi_cmnd *scmd, int eh_flag)
  *    This should be turned into an inline function.  Each scsi command
  *    has its own timer, and as it is added to the queue, we set up the
  *    timer.  When the command completes, we cancel the timer.
- **/
+ */
 void scsi_add_timer(struct scsi_cmnd *scmd, int timeout,
                     void (*complete)(struct scsi_cmnd *))
 {
@@ -155,7 +155,7 @@ void scsi_add_timer(struct scsi_cmnd *scmd, int timeout,
  * Return value:
  *     1 if we were able to detach the timer.  0 if we blew it, and the
  *     timer function has already started to run.
- **/
+ */
 int scsi_delete_timer(struct scsi_cmnd *scmd)
 {
         int rtn;
@@ -181,7 +181,7 @@ int scsi_delete_timer(struct scsi_cmnd *scmd)
  *     only in that the normal completion handling might run, but if the
  *     normal completion function determines that the timer has already
  *     fired, then it mustn't do anything.
- **/
+ */
 void scsi_times_out(struct scsi_cmnd *scmd)
 {
         enum scsi_eh_timer_return (* eh_timed_out)(struct scsi_cmnd *);
@@ -224,7 +224,7 @@ void scsi_times_out(struct scsi_cmnd *scmd)
  *
  * Return value:
  *     0 when dev was taken offline by error recovery. 1 OK to proceed.
- **/
+ */
 int scsi_block_when_processing_errors(struct scsi_device *sdev)
 {
         int online;
@@ -245,7 +245,7 @@ EXPORT_SYMBOL(scsi_block_when_processing_errors);
  * scsi_eh_prt_fail_stats - Log info on failures.
  * @shost:      scsi host being recovered.
  * @work_q:     Queue of scsi cmds to process.
- **/
+ */
 static inline void scsi_eh_prt_fail_stats(struct Scsi_Host *shost,
                                           struct list_head *work_q)
 {
@@ -295,7 +295,7 @@ static inline void scsi_eh_prt_fail_stats(struct Scsi_Host *shost,
  * Notes:
  *      When a deferred error is detected the current command has
  *      not been executed and needs retrying.
- **/
+ */
 static int scsi_check_sense(struct scsi_cmnd *scmd)
 {
         struct scsi_sense_hdr sshdr;
@@ -398,7 +398,7 @@ static int scsi_check_sense(struct scsi_cmnd *scmd)
  *    queued during error recovery.  the main difference here is that we
  *    don't allow for the possibility of retries here, and we are a lot
  *    more restrictive about what we consider acceptable.
- **/
+ */
 static int scsi_eh_completed_normally(struct scsi_cmnd *scmd)
 {
         /*
@@ -452,7 +452,7 @@ static int scsi_eh_completed_normally(struct scsi_cmnd *scmd)
 /**
  * scsi_eh_done - Completion function for error handling.
  * @scmd:       Cmd that is done.
- **/
+ */
 static void scsi_eh_done(struct scsi_cmnd *scmd)
 {
         struct completion     *eh_action;
@@ -469,7 +469,7 @@ static void scsi_eh_done(struct scsi_cmnd *scmd)
 /**
  * scsi_try_host_reset - ask host adapter to reset itself
  * @scmd:       SCSI cmd to send hsot reset.
- **/
+ */
 static int scsi_try_host_reset(struct scsi_cmnd *scmd)
 {
         unsigned long flags;
@@ -498,7 +498,7 @@ static int scsi_try_host_reset(struct scsi_cmnd *scmd)
 /**
  * scsi_try_bus_reset - ask host to perform a bus reset
  * @scmd:       SCSI cmd to send bus reset.
- **/
+ */
 static int scsi_try_bus_reset(struct scsi_cmnd *scmd)
 {
         unsigned long flags;
@@ -533,7 +533,7 @@ static int scsi_try_bus_reset(struct scsi_cmnd *scmd)
  *    unreliable for a given host, then the host itself needs to put a
  *    timer on it, and set the host back to a consistent state prior to
  *    returning.
- **/
+ */
 static int scsi_try_bus_device_reset(struct scsi_cmnd *scmd)
 {
         int rtn;
@@ -568,7 +568,7 @@ static int __scsi_try_to_abort_cmd(struct scsi_cmnd *scmd)
  *    author of the low-level driver wishes this operation to be timed,
  *    they can provide this facility themselves.  helper functions in
  *    scsi_error.c can be supplied to make this easier to do.
- **/
+ */
 static int scsi_try_to_abort_cmd(struct scsi_cmnd *scmd)
 {
         /*
@@ -601,7 +601,7 @@ static void scsi_abort_eh_cmnd(struct scsi_cmnd *scmd)
  * sent must be one that does not transfer any data.  If @sense_bytes != 0
  * @cmnd is ignored and this functions sets up a REQUEST_SENSE command
  * and cmnd buffers to read @sense_bytes into @scmd->sense_buffer.
- **/
+ */
 void scsi_eh_prep_cmnd(struct scsi_cmnd *scmd, struct scsi_eh_save *ses,
                         unsigned char *cmnd, int cmnd_size, unsigned sense_bytes)
 {
@@ -667,7 +667,7 @@ EXPORT_SYMBOL(scsi_eh_prep_cmnd);
  * @ses:        saved information from a coresponding call to scsi_prep_eh_cmnd
  *
  * Undo any damage done by above scsi_prep_eh_cmnd().
- **/
+ */
 void scsi_eh_restore_cmnd(struct scsi_cmnd* scmd, struct scsi_eh_save *ses)
 {
         /*
@@ -697,7 +697,7 @@ EXPORT_SYMBOL(scsi_eh_restore_cmnd);
  *
  * Return value:
  *    SUCCESS or FAILED or NEEDS_RETRY
- **/
+ */
 static int scsi_send_eh_cmnd(struct scsi_cmnd *scmd, unsigned char *cmnd,
                              int cmnd_size, int timeout, unsigned sense_bytes)
 {
@@ -765,7 +765,7 @@ static int scsi_send_eh_cmnd(struct scsi_cmnd *scmd, unsigned char *cmnd,
  *    Some hosts automatically obtain this information, others require
  *    that we obtain it on our own. This function will *not* return until
  *    the command either times out, or it completes.
- **/
+ */
 static int scsi_request_sense(struct scsi_cmnd *scmd)
 {
         return scsi_send_eh_cmnd(scmd, NULL, 0, SENSE_TIMEOUT, ~0);
@@ -782,7 +782,7 @@ static int scsi_request_sense(struct scsi_cmnd *scmd)
  *    and that would disturb what we are doing.  Thus we really want to
  *    keep a list of pending commands for final completion, and once we
  *    are ready to leave error handling we handle completion for real.
- **/
+ */
 void scsi_eh_finish_cmd(struct scsi_cmnd *scmd, struct list_head *done_q)
 {
         scmd->device->host->host_failed--;
@@ -810,7 +810,7 @@ EXPORT_SYMBOL(scsi_eh_finish_cmd);
  *
  *    XXX: Long term this code should go away, but that needs an audit of
  *         all LLDDs first.
- **/
+ */
 int scsi_eh_get_sense(struct list_head *work_q,
                       struct list_head *done_q)
 {
@@ -862,7 +862,7 @@ EXPORT_SYMBOL_GPL(scsi_eh_get_sense);
  *
  * Return value:
  *    0 - Device is ready. 1 - Device NOT ready.
- **/
+ */
 static int scsi_eh_tur(struct scsi_cmnd *scmd)
 {
         static unsigned char tur_command[6] = {TEST_UNIT_READY, 0, 0, 0, 0, 0};
@@ -897,7 +897,7 @@ retry_tur:
  *    command that has timed out.  If the command simply failed, it makes
  *    no sense to try and abort the command, since as far as the shost
  *    adapter is concerned, it isn't running.
- **/
+ */
 static int scsi_eh_abort_cmds(struct list_head *work_q,
                               struct list_head *done_q)
 {
@@ -935,7 +935,7 @@ static int scsi_eh_abort_cmds(struct list_head *work_q,
  *
  * Return value:
  *    0 - Device is ready. 1 - Device NOT ready.
- **/
+ */
 static int scsi_eh_try_stu(struct scsi_cmnd *scmd)
 {
         static unsigned char stu_command[6] = {START_STOP, 0, 0, 0, 1, 0};
@@ -963,7 +963,7 @@ static int scsi_eh_try_stu(struct scsi_cmnd *scmd)
  * Notes:
  *    If commands are failing due to not ready, initializing command required,
  *      try revalidating the device, which will end up sending a start unit. 
- **/
+ */
 static int scsi_eh_stu(struct Scsi_Host *shost,
                               struct list_head *work_q,
                               struct list_head *done_q)
@@ -1017,7 +1017,7 @@ static int scsi_eh_stu(struct Scsi_Host *shost,
  *    devices that are jammed or not - if we have multiple devices, it
  *    makes no sense to try bus_device_reset - we really would need to try
  *    a bus_reset instead. 
- **/
+ */
 static int scsi_eh_bus_device_reset(struct Scsi_Host *shost,
                                     struct list_head *work_q,
                                     struct list_head *done_q)
@@ -1068,7 +1068,7 @@ static int scsi_eh_bus_device_reset(struct Scsi_Host *shost,
  * @shost:      &scsi host being recovered.
  * @work_q:     &list_head for pending commands.
  * @done_q:     &list_head for processed commands.
- **/
+ */
 static int scsi_eh_bus_reset(struct Scsi_Host *shost,
                              struct list_head *work_q,
                              struct list_head *done_q)
@@ -1125,7 +1125,7 @@ static int scsi_eh_bus_reset(struct Scsi_Host *shost,
  * scsi_eh_host_reset - send a host reset 
  * @work_q:     list_head for processed commands.
  * @done_q:     list_head for processed commands.
- **/
+ */
 static int scsi_eh_host_reset(struct list_head *work_q,
                               struct list_head *done_q)
 {
@@ -1160,8 +1160,7 @@ static int scsi_eh_host_reset(struct list_head *work_q,
  * scsi_eh_offline_sdevs - offline scsi devices that fail to recover
  * @work_q:     list_head for processed commands.
  * @done_q:     list_head for processed commands.
- *
- **/
+ */
 static void scsi_eh_offline_sdevs(struct list_head *work_q,
                                   struct list_head *done_q)
 {
@@ -1194,7 +1193,7 @@ static void scsi_eh_offline_sdevs(struct list_head *work_q,
  *    is woken.  In cases where the error code indicates an error that
  *    doesn't require the error handler read (i.e. we don't need to
  *    abort/reset), this function should return SUCCESS.
- **/
+ */
 int scsi_decide_disposition(struct scsi_cmnd *scmd)
 {
         int rtn;
@@ -1375,7 +1374,7 @@ int scsi_decide_disposition(struct scsi_cmnd *scmd)
  *
  *      If scsi_allocate_request() fails for what ever reason, we
  *      completely forget to lock the door.
- **/
+ */
 static void scsi_eh_lock_door(struct scsi_device *sdev)
 {
         unsigned char cmnd[MAX_COMMAND_SIZE];
@@ -1399,7 +1398,7 @@ static void scsi_eh_lock_door(struct scsi_device *sdev)
  * Notes:
  *    When we entered the error handler, we blocked all further i/o to
  *    this device.  we need to 'reverse' this process.
- **/
+ */
 static void scsi_restart_operations(struct Scsi_Host *shost)
 {
         struct scsi_device *sdev;
@@ -1445,8 +1444,7 @@ static void scsi_restart_operations(struct Scsi_Host *shost)
  * @shost:      host to be recovered.
  * @work_q:     &list_head for pending commands.
  * @done_q:     &list_head for processed commands.
- *
- **/
+ */
 void scsi_eh_ready_devs(struct Scsi_Host *shost,
                         struct list_head *work_q,
                         struct list_head *done_q)
@@ -1462,8 +1460,7 @@ EXPORT_SYMBOL_GPL(scsi_eh_ready_devs);
 /**
  * scsi_eh_flush_done_q - finish processed commands or retry them.
  * @done_q:     list_head of processed commands.
- *
- **/
+ */
 void scsi_eh_flush_done_q(struct list_head *done_q)
 {
         struct scsi_cmnd *scmd, *next;
@@ -1517,7 +1514,7 @@ EXPORT_SYMBOL(scsi_eh_flush_done_q);
  *    scsi_finish_cmd() called for it.  we do all of the retry stuff
  *    here, so when we restart the host after we return it should have an
  *    empty queue.
- **/
+ */
 static void scsi_unjam_host(struct Scsi_Host *shost)
 {
         unsigned long flags;
@@ -1544,7 +1541,7 @@ static void scsi_unjam_host(struct Scsi_Host *shost)
  * Notes:
  *    This is the main error handling loop.  This is run as a kernel thread
  *    for every SCSI host and handles all error handling activity.
- **/
+ */
 int scsi_error_handler(void *data)
 {
         struct Scsi_Host *shost = data;
@@ -1773,7 +1770,7 @@ EXPORT_SYMBOL(scsi_reset_provider);
  *
  * Return value:
  *      1 if valid sense data information found, else 0;
- **/
+ */
 int scsi_normalize_sense(const u8 *sense_buffer, int sb_len,
                          struct scsi_sense_hdr *sshdr)
 {
@@ -1839,7 +1836,7 @@ EXPORT_SYMBOL(scsi_command_normalize_sense);
  *
  * Return value:
  *      pointer to start of (first) descriptor if found else NULL
- **/
+ */
 const u8 * scsi_sense_desc_find(const u8 * sense_buffer, int sb_len,
                                 int desc_type)
 {
@@ -1875,7 +1872,7 @@ EXPORT_SYMBOL(scsi_sense_desc_find);
  *
  * Return value:
  *      1 if information field found, 0 if not found.
- **/
+ */
 int scsi_get_sense_info_fld(const u8 * sense_buffer, int sb_len,
                             u64 * info_out)
 {