8 files changed, 87 insertions, 41 deletions

diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c
index c7acef50d5da..33a3c13fd893 100644
--- a/drivers/scsi/qla2xxx/qla_attr.c
+++ b/drivers/scsi/qla2xxx/qla_attr.c
@@ -1016,6 +1016,9 @@ qla2x00_dev_loss_tmo_callbk(struct fc_rport *rport)
         struct Scsi_Host *host = rport_to_shost(rport);
         fc_port_t *fcport = *(fc_port_t **)rport->dd_data;
 
+        if (!fcport)
+                return;
+
         qla2x00_abort_fcport_cmds(fcport);
 
         /*
@@ -1033,6 +1036,9 @@ qla2x00_terminate_rport_io(struct fc_rport *rport)
 {
         fc_port_t *fcport = *(fc_port_t **)rport->dd_data;
 
+        if (!fcport)
+                return;
+
         /*
          * At this point all fcport's software-states are cleared.  Perform any
          * final cleanup of firmware resources (PCBs and XCBs).
diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h
index ba4913353752..a336b4bc81a7 100644
--- a/drivers/scsi/qla2xxx/qla_gbl.h
+++ b/drivers/scsi/qla2xxx/qla_gbl.h
@@ -34,6 +34,7 @@ extern void qla24xx_update_fw_options(scsi_qla_host_t *);
 extern void qla81xx_update_fw_options(scsi_qla_host_t *);
 extern int qla2x00_load_risc(struct scsi_qla_host *, uint32_t *);
 extern int qla24xx_load_risc(scsi_qla_host_t *, uint32_t *);
+extern int qla81xx_load_risc(scsi_qla_host_t *, uint32_t *);
 
 extern int qla2x00_loop_resync(scsi_qla_host_t *);
 
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index 9ad4d0968e5c..f6368a1d3021 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -3562,6 +3562,9 @@ qla24xx_reset_adapter(scsi_qla_host_t *vha)
         WRT_REG_DWORD(&reg->hccr, HCCRX_REL_RISC_PAUSE);
         RD_REG_DWORD(&reg->hccr);
         spin_unlock_irqrestore(&ha->hardware_lock, flags);
+
+        if (IS_NOPOLLING_TYPE(ha))
+                ha->isp_ops->enable_intrs(ha);
 }
 
 /* On sparc systems, obtain port and node WWN from firmware
@@ -3847,6 +3850,10 @@ qla24xx_load_risc_flash(scsi_qla_host_t *vha, uint32_t *srisc_addr)
         uint32_t i;
         struct qla_hw_data *ha = vha->hw;
         struct req_que *req = ha->req_q_map[0];
+
+        qla_printk(KERN_INFO, ha,
+            "FW: Loading from flash (%x)...\n", ha->flt_region_fw);
+
         rval = QLA_SUCCESS;
 
         segments = FA_RISC_CODE_SEGMENTS;
@@ -4022,8 +4029,8 @@ fail_fw_integrity:
         return QLA_FUNCTION_FAILED;
 }
 
-int
-qla24xx_load_risc(scsi_qla_host_t *vha, uint32_t *srisc_addr)
+static int
+qla24xx_load_risc_blob(scsi_qla_host_t *vha, uint32_t *srisc_addr)
 {
         int     rval;
         int     segments, fragment;
@@ -4043,12 +4050,12 @@ qla24xx_load_risc(scsi_qla_host_t *vha, uint32_t *srisc_addr)
                 qla_printk(KERN_ERR, ha, "Firmware images can be retrieved "
                     "from: " QLA_FW_URL ".\n");
 
-                /* Try to load RISC code from flash. */
-                qla_printk(KERN_ERR, ha, "Attempting to load (potentially "
-                    "outdated) firmware from flash.\n");
-                return qla24xx_load_risc_flash(vha, srisc_addr);
+                return QLA_FUNCTION_FAILED;
         }
 
+        qla_printk(KERN_INFO, ha,
+            "FW: Loading via request-firmware...\n");
+
         rval = QLA_SUCCESS;
 
         segments = FA_RISC_CODE_SEGMENTS;
@@ -4133,6 +4140,40 @@ fail_fw_integrity:
         return QLA_FUNCTION_FAILED;
 }
 
+int
+qla24xx_load_risc(scsi_qla_host_t *vha, uint32_t *srisc_addr)
+{
+        int rval;
+
+        /*
+         * FW Load priority:
+         * 1) Firmware via request-firmware interface (.bin file).
+         * 2) Firmware residing in flash.
+         */
+        rval = qla24xx_load_risc_blob(vha, srisc_addr);
+        if (rval == QLA_SUCCESS)
+                return rval;
+
+        return qla24xx_load_risc_flash(vha, srisc_addr);
+}
+
+int
+qla81xx_load_risc(scsi_qla_host_t *vha, uint32_t *srisc_addr)
+{
+        int rval;
+
+        /*
+         * FW Load priority:
+         * 1) Firmware residing in flash.
+         * 2) Firmware via request-firmware interface (.bin file).
+         */
+        rval = qla24xx_load_risc_flash(vha, srisc_addr);
+        if (rval == QLA_SUCCESS)
+                return rval;
+
+        return qla24xx_load_risc_blob(vha, srisc_addr);
+}
+
 void
 qla2x00_try_to_stop_firmware(scsi_qla_host_t *vha)
 {
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index 789fc576f222..e28ad81baf1e 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -1868,6 +1868,7 @@ qla24xx_disable_msix(struct qla_hw_data *ha)
 static int
 qla24xx_enable_msix(struct qla_hw_data *ha, struct rsp_que *rsp)
 {
+#define MIN_MSIX_COUNT  2
         int i, ret;
         struct msix_entry *entries;
         struct qla_msix_entry *qentry;
@@ -1883,12 +1884,16 @@ qla24xx_enable_msix(struct qla_hw_data *ha, struct rsp_que *rsp)
 
         ret = pci_enable_msix(ha->pdev, entries, ha->msix_count);
         if (ret) {
+                if (ret < MIN_MSIX_COUNT)
+                        goto msix_failed;
+
                 qla_printk(KERN_WARNING, ha,
                         "MSI-X: Failed to enable support -- %d/%d\n"
                         " Retry with %d vectors\n", ha->msix_count, ret, ret);
                 ha->msix_count = ret;
                 ret = pci_enable_msix(ha->pdev, entries, ha->msix_count);
                 if (ret) {
+msix_failed:
                         qla_printk(KERN_WARNING, ha, "MSI-X: Failed to enable"
                                 " support, giving up -- %d/%d\n",
                                 ha->msix_count, ret);
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index db4df45234a5..f94ffbb98e95 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -58,14 +58,11 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp)
          * seconds. This is to serialize actual issuing of mailbox cmds during
          * non ISP abort time.
          */
-        if (!abort_active) {
-                if (!wait_for_completion_timeout(&ha->mbx_cmd_comp,
-                    mcp->tov * HZ)) {
-                        /* Timeout occurred. Return error. */
-                        DEBUG2_3_11(printk("%s(%ld): cmd access timeout. "
-                            "Exiting.\n", __func__, base_vha->host_no));
-                        return QLA_FUNCTION_TIMEOUT;
-                }
+        if (!wait_for_completion_timeout(&ha->mbx_cmd_comp, mcp->tov * HZ)) {
+                /* Timeout occurred. Return error. */
+                DEBUG2_3_11(printk("%s(%ld): cmd access timeout. "
+                    "Exiting.\n", __func__, base_vha->host_no));
+                return QLA_FUNCTION_TIMEOUT;
         }
 
         ha->flags.mbox_busy = 1;
@@ -265,8 +262,7 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp)
         }
 
         /* Allow next mbx cmd to come in. */
-        if (!abort_active)
-                complete(&ha->mbx_cmd_comp);
+        complete(&ha->mbx_cmd_comp);
 
         if (rval) {
                 DEBUG2_3_11(printk("%s(%ld): **** FAILED. mbx0=%x, mbx1=%x, "
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index cf32653fe01a..c11f872d3e10 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -65,8 +65,6 @@ MODULE_PARM_DESC(ql2xextended_error_logging,
 
 static void qla2x00_free_device(scsi_qla_host_t *);
 
-static void qla2x00_config_dma_addressing(scsi_qla_host_t *ha);
-
 int ql2xfdmienable=1;
 module_param(ql2xfdmienable, int, S_IRUGO|S_IRUSR);
 MODULE_PARM_DESC(ql2xfdmienable,
@@ -800,6 +798,7 @@ qla2xxx_eh_abort(struct scsi_cmnd *cmd)
                 if (ha->isp_ops->abort_command(vha, sp, req)) {
                         DEBUG2(printk("%s(%ld): abort_command "
                         "mbx failed.\n", __func__, vha->host_no));
+                        ret = FAILED;
                 } else {
                         DEBUG3(printk("%s(%ld): abort_command "
                         "mbx success.\n", __func__, vha->host_no));
@@ -1241,9 +1240,8 @@ qla2x00_change_queue_type(struct scsi_device *sdev, int tag_type)
  * supported addressing method.
  */
 static void
-qla2x00_config_dma_addressing(scsi_qla_host_t *vha)
+qla2x00_config_dma_addressing(struct qla_hw_data *ha)
 {
-        struct qla_hw_data *ha = vha->hw;
         /* Assume a 32bit DMA mask. */
         ha->flags.enable_64bit_addressing = 0;
 
@@ -1480,7 +1478,7 @@ static struct isp_operations qla81xx_isp_ops = {
         .reset_adapter          = qla24xx_reset_adapter,
         .nvram_config           = qla81xx_nvram_config,
         .update_fw_options      = qla81xx_update_fw_options,
-        .load_risc              = qla24xx_load_risc,
+        .load_risc              = qla81xx_load_risc,
         .pci_info_str           = qla24xx_pci_info_str,
         .fw_version_str         = qla24xx_fw_version_str,
         .intr_handler           = qla24xx_intr_handler,
@@ -1869,6 +1867,7 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 
         set_bit(0, (unsigned long *) ha->vp_idx_map);
 
+        qla2x00_config_dma_addressing(ha);
         ret = qla2x00_mem_alloc(ha, req_length, rsp_length, &req, &rsp);
         if (!ret) {
                 qla_printk(KERN_WARNING, ha,
@@ -1888,13 +1887,13 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
                     "[ERROR] Failed to allocate memory for scsi_host\n");
 
                 ret = -ENOMEM;
+                qla2x00_mem_free(ha);
+                qla2x00_free_que(ha, req, rsp);
                 goto probe_hw_failed;
         }
 
         pci_set_drvdata(pdev, base_vha);
 
-        qla2x00_config_dma_addressing(base_vha);
-
         host = base_vha->host;
         base_vha->req_ques[0] = req->id;
         host->can_queue = req->length + 128;
@@ -1917,14 +1916,13 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
         /* Set up the irqs */
         ret = qla2x00_request_irqs(ha, rsp);
         if (ret)
-                goto probe_failed;
-
+                goto probe_init_failed;
         /* Alloc arrays of request and response ring ptrs */
         if (!qla2x00_alloc_queues(ha)) {
                 qla_printk(KERN_WARNING, ha,
                 "[ERROR] Failed to allocate memory for queue"
                 " pointers\n");
-                goto probe_failed;
+                goto probe_init_failed;
         }
         ha->rsp_q_map[0] = rsp;
         ha->req_q_map[0] = req;
@@ -1997,6 +1995,10 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 
         return 0;
 
+probe_init_failed:
+        qla2x00_free_que(ha, req, rsp);
+        ha->max_queues = 0;
+
 probe_failed:
         qla2x00_free_device(base_vha);
 
diff --git a/drivers/scsi/qla2xxx/qla_sup.c b/drivers/scsi/qla2xxx/qla_sup.c
index 303f8ee11f25..9c3b694c049d 100644
--- a/drivers/scsi/qla2xxx/qla_sup.c
+++ b/drivers/scsi/qla2xxx/qla_sup.c
@@ -944,9 +944,9 @@ qla24xx_unprotect_flash(struct qla_hw_data *ha)
         if (!ha->fdt_wrt_disable)
                 return;
 
-        /* Disable flash write-protection. */
+        /* Disable flash write-protection, first clear SR protection bit */
         qla24xx_write_flash_dword(ha, flash_conf_addr(ha, 0x101), 0);
-        /* Some flash parts need an additional zero-write to clear bits.*/
+        /* Then write zero again to clear remaining SR bits.*/
         qla24xx_write_flash_dword(ha, flash_conf_addr(ha, 0x101), 0);
 }
 
@@ -980,12 +980,11 @@ qla24xx_write_flash_data(scsi_qla_host_t *vha, uint32_t *dwptr, uint32_t faddr,
     uint32_t dwords)
 {
         int ret;
-        uint32_t liter, miter;
+        uint32_t liter;
         uint32_t sec_mask, rest_addr;
-        uint32_t fdata, findex;
+        uint32_t fdata;
         dma_addr_t optrom_dma;
         void *optrom = NULL;
-        uint32_t *s, *d;
         struct qla_hw_data *ha = vha->hw;
 
         ret = QLA_SUCCESS;
@@ -1003,17 +1002,15 @@ qla24xx_write_flash_data(scsi_qla_host_t *vha, uint32_t *dwptr, uint32_t faddr,
         }
 
         rest_addr = (ha->fdt_block_size >> 2) - 1;
-        sec_mask = (ha->optrom_size >> 2) - (ha->fdt_block_size >> 2);
+        sec_mask = ~rest_addr;
 
         qla24xx_unprotect_flash(ha);
 
         for (liter = 0; liter < dwords; liter++, faddr++, dwptr++) {
-
-                findex = faddr;
-                fdata = (findex & sec_mask) << 2;
+                fdata = (faddr & sec_mask) << 2;
 
                 /* Are we at the beginning of a sector? */
-                if ((findex & rest_addr) == 0) {
+                if ((faddr & rest_addr) == 0) {
                         /* Do sector unprotect. */
                         if (ha->fdt_unprotect_sec_cmd)
                                 qla24xx_write_flash_dword(ha,
@@ -1024,7 +1021,7 @@ qla24xx_write_flash_data(scsi_qla_host_t *vha, uint32_t *dwptr, uint32_t faddr,
                             (fdata & 0xff00) |((fdata << 16) &
                             0xff0000) | ((fdata >> 16) & 0xff));
                         if (ret != QLA_SUCCESS) {
-                                DEBUG9(qla_printk("Unable to flash sector: "
+                                DEBUG9(qla_printk("Unable to erase sector: "
                                     "address=%x.\n", faddr));
                                 break;
                         }
@@ -1033,9 +1030,7 @@ qla24xx_write_flash_data(scsi_qla_host_t *vha, uint32_t *dwptr, uint32_t faddr,
                 /* Go with burst-write. */
                 if (optrom && (liter + OPTROM_BURST_DWORDS) <= dwords) {
                         /* Copy data to DMA'ble buffer. */
-                        for (miter = 0, s = optrom, d = dwptr;
-                            miter < OPTROM_BURST_DWORDS; miter++, s++, d++)
-                                *s = cpu_to_le32(*d);
+                        memcpy(optrom, dwptr, OPTROM_BURST_SIZE);
 
                         ret = qla2x00_load_ram(vha, optrom_dma,
                             flash_data_addr(ha, faddr),
diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h
index 808bab6ef06b..cfa4c11a4797 100644
--- a/drivers/scsi/qla2xxx/qla_version.h
+++ b/drivers/scsi/qla2xxx/qla_version.h
@@ -7,7 +7,7 @@
 /*
  * Driver version
  */
-#define QLA2XXX_VERSION      "8.03.00-k1"
+#define QLA2XXX_VERSION      "8.03.00-k2"
 
 #define QLA_DRIVER_MAJOR_VER    8
 #define QLA_DRIVER_MINOR_VER    3