1 files changed, 74 insertions, 40 deletions

diff --git a/drivers/scsi/qla1280.c b/drivers/scsi/qla1280.c
index df09820e8916..351b56ced925 100644
--- a/drivers/scsi/qla1280.c
+++ b/drivers/scsi/qla1280.c
@@ -348,6 +348,7 @@
 #include <linux/interrupt.h>
 #include <linux/init.h>
 #include <linux/dma-mapping.h>
+#include <linux/firmware.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
@@ -384,11 +385,7 @@
 #define MEMORY_MAPPED_IO        1
 #endif
 
-#define UNIQUE_FW_NAME
 #include "qla1280.h"
-#include "ql12160_fw.h"         /* ISP RISC codes */
-#include "ql1280_fw.h"
-#include "ql1040_fw.h"
 
 #ifndef BITS_PER_LONG
 #error "BITS_PER_LONG not defined!"
@@ -541,10 +538,7 @@ __setup("qla1280=", qla1280_setup);
 struct qla_boards {
         unsigned char name[9];  /* Board ID String */
         int numPorts;           /* Number of SCSI ports */
-        unsigned short *fwcode; /* pointer to FW array         */
-        unsigned short *fwlen;  /* number of words in array    */
-        unsigned short *fwstart;        /* start address for F/W       */
-        unsigned char *fwver;   /* Ptr to F/W version array    */
+        char *fwname;           /* firmware name        */
 };
 
 /* NOTE: the last argument in each entry is used to index ql1280_board_tbl */
@@ -567,19 +561,13 @@ MODULE_DEVICE_TABLE(pci, qla1280_pci_tbl);
 
 static struct qla_boards ql1280_board_tbl[] = {
         /* Name ,  Number of ports, FW details */
-        {"QLA12160", 2, &fw12160i_code01[0], &fw12160i_length01,
-         &fw12160i_addr01, &fw12160i_version_str[0]},
-        {"QLA1040", 1, &risc_code01[0], &risc_code_length01,
-         &risc_code_addr01, &firmware_version[0]},
-        {"QLA1080", 1, &fw1280ei_code01[0], &fw1280ei_length01,
-         &fw1280ei_addr01, &fw1280ei_version_str[0]},
-        {"QLA1240", 2, &fw1280ei_code01[0], &fw1280ei_length01,
-         &fw1280ei_addr01, &fw1280ei_version_str[0]},
-        {"QLA1280", 2, &fw1280ei_code01[0], &fw1280ei_length01,
-         &fw1280ei_addr01, &fw1280ei_version_str[0]},
-        {"QLA10160", 1, &fw12160i_code01[0], &fw12160i_length01,
-         &fw12160i_addr01, &fw12160i_version_str[0]},
-        {"        ", 0}
+        {"QLA12160",    2, "qlogic/12160.bin"},
+        {"QLA1040",     1, "qlogic/1040.bin"},
+        {"QLA1080",     1, "qlogic/1280.bin"},
+        {"QLA1240",     2, "qlogic/1280.bin"},
+        {"QLA1280",     2, "qlogic/1280.bin"},
+        {"QLA10160",    1, "qlogic/12160.bin"},
+        {"        ",    0, "   "},
 };
 
 static int qla1280_verbose = 1;
@@ -704,7 +692,7 @@ qla1280_info(struct Scsi_Host *host)
         sprintf (bp,
                  "QLogic %s PCI to SCSI Host Adapter\n"
                  "       Firmware version: %2d.%02d.%02d, Driver version %s",
-                 &bdp->name[0], bdp->fwver[0], bdp->fwver[1], bdp->fwver[2],
+                 &bdp->name[0], ha->fwver1, ha->fwver2, ha->fwver3,
                  QLA1280_VERSION);
         return bp;
 }
@@ -1648,36 +1636,60 @@ qla1280_chip_diag(struct scsi_qla_host *ha)
 static int
 qla1280_load_firmware_pio(struct scsi_qla_host *ha)
 {
-        uint16_t risc_address, *risc_code_address, risc_code_size;
+        const struct firmware *fw;
+        const __le16 *fw_data;
+        uint16_t risc_address, risc_code_size;
         uint16_t mb[MAILBOX_REGISTER_COUNT], i;
         int err;
 
+        err = request_firmware(&fw, ql1280_board_tbl[ha->devnum].fwname,
+                               &ha->pdev->dev);
+        if (err) {
+                printk(KERN_ERR "Failed to load image \"%s\" err %d\n",
+                       ql1280_board_tbl[ha->devnum].fwname, err);
+                return err;
+        }
+        if ((fw->size % 2) || (fw->size < 6)) {
+                printk(KERN_ERR "Bogus length %zu in image \"%s\"\n",
+                       fw->size, ql1280_board_tbl[ha->devnum].fwname);
+                err = -EINVAL;
+                goto out;
+        }
+        ha->fwver1 = fw->data[0];
+        ha->fwver2 = fw->data[1];
+        ha->fwver3 = fw->data[2];
+        fw_data = (const __le16 *)&fw->data[0];
+        ha->fwstart = __le16_to_cpu(fw_data[2]);
+
         /* Load RISC code. */
-        risc_address = *ql1280_board_tbl[ha->devnum].fwstart;
-        risc_code_address = ql1280_board_tbl[ha->devnum].fwcode;
-        risc_code_size = *ql1280_board_tbl[ha->devnum].fwlen;
+        risc_address = ha->fwstart;
+        fw_data = (const __le16 *)&fw->data[4];
+        risc_code_size = (fw->size - 6) / 2;
 
         for (i = 0; i < risc_code_size; i++) {
                 mb[0] = MBC_WRITE_RAM_WORD;
                 mb[1] = risc_address + i;
-                mb[2] = risc_code_address[i];
+                mb[2] = __le16_to_cpu(fw_data[i]);
 
                 err = qla1280_mailbox_command(ha, BIT_0 | BIT_1 | BIT_2, mb);
                 if (err) {
                         printk(KERN_ERR "scsi(%li): Failed to load firmware\n",
                                         ha->host_no);
-                        return err;
+                        goto out;
                 }
         }
-
-        return 0;
+out:
+        release_firmware(fw);
+        return err;
 }
 
 #define DUMP_IT_BACK 0          /* for debug of RISC loading */
 static int
 qla1280_load_firmware_dma(struct scsi_qla_host *ha)
 {
-        uint16_t risc_address, *risc_code_address, risc_code_size;
+        const struct firmware *fw;
+        const __le16 *fw_data;
+        uint16_t risc_address, risc_code_size;
         uint16_t mb[MAILBOX_REGISTER_COUNT], cnt;
         int err = 0, num, i;
 #if DUMP_IT_BACK
@@ -1689,10 +1701,29 @@ qla1280_load_firmware_dma(struct scsi_qla_host *ha)
                 return -ENOMEM;
 #endif
 
+        err = request_firmware(&fw, ql1280_board_tbl[ha->devnum].fwname,
+                               &ha->pdev->dev);
+        if (err) {
+                printk(KERN_ERR "Failed to load image \"%s\" err %d\n",
+                       ql1280_board_tbl[ha->devnum].fwname, err);
+                return err;
+        }
+        if ((fw->size % 2) || (fw->size < 6)) {
+                printk(KERN_ERR "Bogus length %zu in image \"%s\"\n",
+                       fw->size, ql1280_board_tbl[ha->devnum].fwname);
+                err = -EINVAL;
+                goto out;
+        }
+        ha->fwver1 = fw->data[0];
+        ha->fwver2 = fw->data[1];
+        ha->fwver3 = fw->data[2];
+        fw_data = (const __le16 *)&fw->data[0];
+        ha->fwstart = __le16_to_cpu(fw_data[2]);
+
         /* Load RISC code. */
-        risc_address = *ql1280_board_tbl[ha->devnum].fwstart;
-        risc_code_address = ql1280_board_tbl[ha->devnum].fwcode;
-        risc_code_size = *ql1280_board_tbl[ha->devnum].fwlen;
+        risc_address = ha->fwstart;
+        fw_data = (const __le16 *)&fw->data[4];
+        risc_code_size = (fw->size - 6) / 2;
 
         dprintk(1, "%s: DMA RISC code (%i) words\n",
                         __func__, risc_code_size);
@@ -1708,10 +1739,9 @@ qla1280_load_firmware_dma(struct scsi_qla_host *ha)
 
                 dprintk(2, "qla1280_setup_chip:  loading risc @ =(0x%p),"
                         "%d,%d(0x%x)\n",
-                        risc_code_address, cnt, num, risc_address);
+                        fw_data, cnt, num, risc_address);
                 for(i = 0; i < cnt; i++)
-                        ((__le16 *)ha->request_ring)[i] =
-                                cpu_to_le16(risc_code_address[i]);
+                        ((__le16 *)ha->request_ring)[i] = fw_data[i];
 
                 mb[0] = MBC_LOAD_RAM;
                 mb[1] = risc_address;
@@ -1763,7 +1793,7 @@ qla1280_load_firmware_dma(struct scsi_qla_host *ha)
 #endif
                 risc_address += cnt;
                 risc_code_size = risc_code_size - cnt;
-                risc_code_address = risc_code_address + cnt;
+                fw_data = fw_data + cnt;
                 num++;
         }
 
@@ -1771,6 +1801,7 @@ qla1280_load_firmware_dma(struct scsi_qla_host *ha)
 #if DUMP_IT_BACK
         pci_free_consistent(ha->pdev, 8000, tbuf, p_tbuf);
 #endif
+        release_firmware(fw);
         return err;
 }
 
@@ -1786,7 +1817,7 @@ qla1280_start_firmware(struct scsi_qla_host *ha)
         /* Verify checksum of loaded RISC code. */
         mb[0] = MBC_VERIFY_CHECKSUM;
         /* mb[1] = ql12_risc_code_addr01; */
-        mb[1] = *ql1280_board_tbl[ha->devnum].fwstart;
+        mb[1] = ha->fwstart;
         err = qla1280_mailbox_command(ha, BIT_1 | BIT_0, mb);
         if (err) {
                 printk(KERN_ERR "scsi(%li): RISC checksum failed.\n", ha->host_no);
@@ -1796,7 +1827,7 @@ qla1280_start_firmware(struct scsi_qla_host *ha)
         /* Start firmware execution. */
         dprintk(1, "%s: start firmware running.\n", __func__);
         mb[0] = MBC_EXECUTE_FIRMWARE;
-        mb[1] = *ql1280_board_tbl[ha->devnum].fwstart;
+        mb[1] = ha->fwstart;
         err = qla1280_mailbox_command(ha, BIT_1 | BIT_0, &mb[0]);
         if (err) {
                 printk(KERN_ERR "scsi(%li): Failed to start firmware\n",
@@ -4450,6 +4481,9 @@ module_exit(qla1280_exit);
 MODULE_AUTHOR("Qlogic & Jes Sorensen");
 MODULE_DESCRIPTION("Qlogic ISP SCSI (qla1x80/qla1x160) driver");
 MODULE_LICENSE("GPL");
+MODULE_FIRMWARE("qlogic/1040.bin");
+MODULE_FIRMWARE("qlogic/1280.bin");
+MODULE_FIRMWARE("qlogic/12160.bin");
 MODULE_VERSION(QLA1280_VERSION);
 
 /*