1 files changed, 112 insertions, 0 deletions

diff --git a/drivers/scsi/pm8001/pm8001_defs.h b/drivers/scsi/pm8001/pm8001_defs.h
new file mode 100644
index 000000000000..944afada61ee
--- /dev/null
+++ b/drivers/scsi/pm8001/pm8001_defs.h
@@ -0,0 +1,112 @@
+/*
+ * PMC-Sierra SPC 8001 SAS/SATA based host adapters driver
+ *
+ * Copyright (c) 2008-2009 USI Co., Ltd.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ *
+ */
+
+#ifndef _PM8001_DEFS_H_
+#define _PM8001_DEFS_H_
+
+enum chip_flavors {
+        chip_8001,
+};
+#define USI_MAX_MEMCNT                  9
+#define PM8001_MAX_DMA_SG               SG_ALL
+enum phy_speed {
+        PHY_SPEED_15 = 0x01,
+        PHY_SPEED_30 = 0x02,
+        PHY_SPEED_60 = 0x04,
+};
+
+enum data_direction {
+        DATA_DIR_NONE = 0x0,    /* NO TRANSFER */
+        DATA_DIR_IN = 0x01,     /* INBOUND */
+        DATA_DIR_OUT = 0x02,    /* OUTBOUND */
+        DATA_DIR_BYRECIPIENT = 0x04, /* UNSPECIFIED */
+};
+
+enum port_type {
+        PORT_TYPE_SAS = (1L << 1),
+        PORT_TYPE_SATA = (1L << 0),
+};
+
+/* driver compile-time configuration */
+#define PM8001_MAX_CCB           512    /* max ccbs supported */
+#define PM8001_MAX_INB_NUM       1
+#define PM8001_MAX_OUTB_NUM      1
+#define PM8001_CAN_QUEUE         128    /* SCSI Queue depth */
+
+/* unchangeable hardware details */
+#define PM8001_MAX_PHYS          8      /* max. possible phys */
+#define PM8001_MAX_PORTS         8      /* max. possible ports */
+#define PM8001_MAX_DEVICES       1024   /* max supported device */
+
+enum memory_region_num {
+        AAP1 = 0x0, /* application acceleration processor */
+        IOP,        /* IO processor */
+        CI,         /* consumer index */
+        PI,         /* producer index */
+        IB,         /* inbound queue */
+        OB,         /* outbound queue */
+        NVMD,       /* NVM device */
+        DEV_MEM,    /* memory for devices */
+        CCB_MEM,    /* memory for command control block */
+};
+#define PM8001_EVENT_LOG_SIZE    (128 * 1024)
+
+/*error code*/
+enum mpi_err {
+        MPI_IO_STATUS_SUCCESS = 0x0,
+        MPI_IO_STATUS_BUSY = 0x01,
+        MPI_IO_STATUS_FAIL = 0x02,
+};
+
+/**
+ * Phy Control constants
+ */
+enum phy_control_type {
+        PHY_LINK_RESET = 0x01,
+        PHY_HARD_RESET = 0x02,
+        PHY_NOTIFY_ENABLE_SPINUP = 0x10,
+};
+
+enum pm8001_hba_info_flags {
+        PM8001F_INIT_TIME       = (1U << 0),
+        PM8001F_RUN_TIME        = (1U << 1),
+};
+
+#endif