10 files changed, 224 insertions, 219 deletions

diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h
index 540569849099..1877d9811831 100644
--- a/drivers/scsi/lpfc/lpfc.h
+++ b/drivers/scsi/lpfc/lpfc.h
@@ -457,10 +457,6 @@ struct lpfc_hba {
         void (*lpfc_scsi_prep_cmnd)
                 (struct lpfc_vport *, struct lpfc_scsi_buf *,
                  struct lpfc_nodelist *);
-        int (*lpfc_scsi_prep_task_mgmt_cmd)
-                (struct lpfc_vport *, struct lpfc_scsi_buf *,
-                 unsigned int, uint8_t);
-
         /* IOCB interface function jump table entries */
         int (*__lpfc_sli_issue_iocb)
                 (struct lpfc_hba *, uint32_t,
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index d73e677201f8..fc07be5fbce9 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -3113,6 +3113,9 @@ sysfs_ctlreg_write(struct kobject *kobj, struct bin_attribute *bin_attr,
         struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
         struct lpfc_hba   *phba = vport->phba;
 
+        if (phba->sli_rev >= LPFC_SLI_REV4)
+                return -EPERM;
+
         if ((off + count) > FF_REG_AREA_SIZE)
                 return -ERANGE;
 
@@ -3163,6 +3166,9 @@ sysfs_ctlreg_read(struct kobject *kobj, struct bin_attribute *bin_attr,
         struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
         struct lpfc_hba   *phba = vport->phba;
 
+        if (phba->sli_rev >= LPFC_SLI_REV4)
+                return -EPERM;
+
         if (off > FF_REG_AREA_SIZE)
                 return -ERANGE;
 
diff --git a/drivers/scsi/lpfc/lpfc_ct.c b/drivers/scsi/lpfc/lpfc_ct.c
index 1dbccfd3d022..0e532f072eb3 100644
--- a/drivers/scsi/lpfc/lpfc_ct.c
+++ b/drivers/scsi/lpfc/lpfc_ct.c
@@ -1732,7 +1732,9 @@ lpfc_decode_firmware_rev(struct lpfc_hba *phba, char *fwrevision, int flag)
         uint32_t *ptr, str[4];
         uint8_t *fwname;
 
-        if (vp->rev.rBit) {
+        if (phba->sli_rev == LPFC_SLI_REV4)
+                sprintf(fwrevision, "%s", vp->rev.opFwName);
+        else if (vp->rev.rBit) {
                 if (psli->sli_flag & LPFC_SLI_ACTIVE)
                         rev = vp->rev.sli2FwRev;
                 else
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index 6bdeb14878a2..2aabaf9c4053 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -6108,9 +6108,17 @@ lpfc_issue_els_fdisc(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
         icmd->un.elsreq64.myID = 0;
         icmd->un.elsreq64.fl = 1;
 
-        /* For FDISC, Let FDISC rsp set the NPortID for this VPI */
-        icmd->ulpCt_h = 1;
-        icmd->ulpCt_l = 0;
+        if  (phba->sli_rev == LPFC_SLI_REV4) {
+                /* FDISC needs to be 1 for WQE VPI */
+                elsiocb->iocb.ulpCt_h = (SLI4_CT_VPI >> 1) & 1;
+                elsiocb->iocb.ulpCt_l = SLI4_CT_VPI & 1 ;
+                /* Set the ulpContext to the vpi */
+                elsiocb->iocb.ulpContext = vport->vpi + phba->vpi_base;
+        } else {
+                /* For FDISC, Let FDISC rsp set the NPortID for this VPI */
+                icmd->ulpCt_h = 1;
+                icmd->ulpCt_l = 0;
+        }
 
         pcmd = (uint8_t *) (((struct lpfc_dmabuf *) elsiocb->context2)->virt);
         *((uint32_t *) (pcmd)) = ELS_CMD_FDISC;
diff --git a/drivers/scsi/lpfc/lpfc_hw.h b/drivers/scsi/lpfc/lpfc_hw.h
index 02aa016b93e9..8a3a026667e4 100644
--- a/drivers/scsi/lpfc/lpfc_hw.h
+++ b/drivers/scsi/lpfc/lpfc_hw.h
@@ -1183,7 +1183,6 @@ typedef struct {
 #define PCI_DEVICE_ID_ZEPHYR_DCSP   0xfe12
 #define PCI_VENDOR_ID_SERVERENGINE  0x19a2
 #define PCI_DEVICE_ID_TIGERSHARK    0x0704
-#define PCI_DEVICE_ID_TIGERSHARK_S  0x0705
 
 #define JEDEC_ID_ADDRESS            0x0080001c
 #define FIREFLY_JEDEC_ID            0x1ACC
diff --git a/drivers/scsi/lpfc/lpfc_hw4.h b/drivers/scsi/lpfc/lpfc_hw4.h
index 39c34b3ad29d..749811a1627b 100644
--- a/drivers/scsi/lpfc/lpfc_hw4.h
+++ b/drivers/scsi/lpfc/lpfc_hw4.h
@@ -422,9 +422,9 @@ struct lpfc_wqe_generic{
 #define lpfc_wqe_gen_pri_WORD           word10
         uint32_t word11;
 #define lpfc_wqe_gen_cq_id_SHIFT        16
-#define lpfc_wqe_gen_cq_id_MASK         0x000003FF
+#define lpfc_wqe_gen_cq_id_MASK         0x0000FFFF
 #define lpfc_wqe_gen_cq_id_WORD         word11
-#define LPFC_WQE_CQ_ID_DEFAULT  0x3ff
+#define LPFC_WQE_CQ_ID_DEFAULT  0xffff
 #define lpfc_wqe_gen_wqec_SHIFT         7
 #define lpfc_wqe_gen_wqec_MASK          0x00000001
 #define lpfc_wqe_gen_wqec_WORD          word11
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 2f5907f92eea..4363331aba77 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -428,7 +428,8 @@ lpfc_config_port_post(struct lpfc_hba *phba)
         /* Reset the DFT_HBA_Q_DEPTH to the max xri  */
         if (phba->cfg_hba_queue_depth > (mb->un.varRdConfig.max_xri+1))
                 phba->cfg_hba_queue_depth =
-                        mb->un.varRdConfig.max_xri + 1;
+                        (mb->un.varRdConfig.max_xri + 1) -
+                                        lpfc_sli4_get_els_iocb_cnt(phba);
 
         phba->lmt = mb->un.varRdConfig.lmt;
 
@@ -1646,10 +1647,6 @@ lpfc_get_hba_model_desc(struct lpfc_hba *phba, uint8_t *mdp, uint8_t *descp)
                 oneConnect = 1;
                 m = (typeof(m)) {"OCe10100-F", max_speed, "PCIe"};
                 break;
-        case PCI_DEVICE_ID_TIGERSHARK_S:
-                oneConnect = 1;
-                m = (typeof(m)) {"OCe10100-F-S", max_speed, "PCIe"};
-                break;
         default:
                 m = (typeof(m)){ NULL };
                 break;
@@ -7184,16 +7181,19 @@ lpfc_sli4_get_els_iocb_cnt(struct lpfc_hba *phba)
 {
         int max_xri = phba->sli4_hba.max_cfg_param.max_xri;
 
-        if (max_xri <= 100)
-                return 4;
-        else if (max_xri <= 256)
-                return 8;
-        else if (max_xri <= 512)
-                return 16;
-        else if (max_xri <= 1024)
-                return 32;
-        else
-                return 48;
+        if (phba->sli_rev == LPFC_SLI_REV4) {
+                if (max_xri <= 100)
+                        return 4;
+                else if (max_xri <= 256)
+                        return 8;
+                else if (max_xri <= 512)
+                        return 16;
+                else if (max_xri <= 1024)
+                        return 32;
+                else
+                        return 48;
+        } else
+                return 0;
 }
 
 /**
@@ -7642,7 +7642,6 @@ lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid)
 
         switch (dev_id) {
         case PCI_DEVICE_ID_TIGERSHARK:
-        case PCI_DEVICE_ID_TIGERSHARK_S:
                 rc = lpfc_pci_probe_one_s4(pdev, pid);
                 break;
         default:
@@ -7941,8 +7940,6 @@ static struct pci_device_id lpfc_id_table[] = {
                 PCI_ANY_ID, PCI_ANY_ID, },
         {PCI_VENDOR_ID_SERVERENGINE, PCI_DEVICE_ID_TIGERSHARK,
                 PCI_ANY_ID, PCI_ANY_ID, },
-        {PCI_VENDOR_ID_SERVERENGINE, PCI_DEVICE_ID_TIGERSHARK_S,
-                PCI_ANY_ID, PCI_ANY_ID, },
         { 0 }
 };
 
diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index e9fa6762044a..32f8dac6abfe 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -116,6 +116,27 @@ lpfc_debug_save_dif(struct scsi_cmnd *cmnd)
 }
 
 /**
+ * lpfc_sli4_set_rsp_sgl_last - Set the last bit in the response sge.
+ * @phba: Pointer to HBA object.
+ * @lpfc_cmd: lpfc scsi command object pointer.
+ *
+ * This function is called from the lpfc_prep_task_mgmt_cmd function to
+ * set the last bit in the response sge entry.
+ **/
+static void
+lpfc_sli4_set_rsp_sgl_last(struct lpfc_hba *phba,
+                                struct lpfc_scsi_buf *lpfc_cmd)
+{
+        struct sli4_sge *sgl = (struct sli4_sge *)lpfc_cmd->fcp_bpl;
+        if (sgl) {
+                sgl += 1;
+                sgl->word2 = le32_to_cpu(sgl->word2);
+                bf_set(lpfc_sli4_sge_last, sgl, 1);
+                sgl->word2 = cpu_to_le32(sgl->word2);
+        }
+}
+
+/**
  * lpfc_update_stats - Update statistical data for the command completion
  * @phba: Pointer to HBA object.
  * @lpfc_cmd: lpfc scsi command object pointer.
@@ -1978,7 +1999,7 @@ lpfc_send_scsi_error_event(struct lpfc_hba *phba, struct lpfc_vport *vport,
 }
 
 /**
- * lpfc_scsi_unprep_dma_buf_s3 - Un-map DMA mapping of SG-list for SLI3 dev
+ * lpfc_scsi_unprep_dma_buf - Un-map DMA mapping of SG-list for dev
  * @phba: The HBA for which this call is being executed.
  * @psb: The scsi buffer which is going to be un-mapped.
  *
@@ -1986,7 +2007,7 @@ lpfc_send_scsi_error_event(struct lpfc_hba *phba, struct lpfc_vport *vport,
  * field of @lpfc_cmd for device with SLI-3 interface spec.
  **/
 static void
-lpfc_scsi_unprep_dma_buf_s3(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb)
+lpfc_scsi_unprep_dma_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb)
 {
         /*
          * There are only two special cases to consider.  (1) the scsi command
@@ -2003,36 +2024,6 @@ lpfc_scsi_unprep_dma_buf_s3(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb)
 }
 
 /**
- * lpfc_scsi_unprep_dma_buf_s4 - Un-map DMA mapping of SG-list for SLI4 dev
- * @phba: The Hba for which this call is being executed.
- * @psb: The scsi buffer which is going to be un-mapped.
- *
- * This routine does DMA un-mapping of scatter gather list of scsi command
- * field of @lpfc_cmd for device with SLI-4 interface spec. If we have to
- * remove the sgl for this scsi buffer then we will do it here. For now
- * we should be able to just call the sli3 unprep routine.
- **/
-static void
-lpfc_scsi_unprep_dma_buf_s4(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb)
-{
-        lpfc_scsi_unprep_dma_buf_s3(phba, psb);
-}
-
-/**
- * lpfc_scsi_unprep_dma_buf - Wrapper function for unmap DMA mapping of SG-list
- * @phba: The Hba for which this call is being executed.
- * @psb: The scsi buffer which is going to be un-mapped.
- *
- * This routine does DMA un-mapping of scatter gather list of scsi command
- * field of @lpfc_cmd for device with SLI-4 interface spec.
- **/
-static void
-lpfc_scsi_unprep_dma_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb)
-{
-        phba->lpfc_scsi_unprep_dma_buf(phba, psb);
-}
-
-/**
  * lpfc_handler_fcp_err - FCP response handler
  * @vport: The virtual port for which this call is being executed.
  * @lpfc_cmd: Pointer to lpfc_scsi_buf data structure.
@@ -2461,7 +2452,7 @@ lpfc_fcpcmd_to_iocb(uint8_t *data, struct fcp_cmnd *fcp_cmnd)
 }
 
 /**
- * lpfc_scsi_prep_cmnd_s3 - Convert scsi cmnd to FCP infor unit for SLI3 dev
+ * lpfc_scsi_prep_cmnd - Wrapper func for convert scsi cmnd to FCP info unit
  * @vport: The virtual port for which this call is being executed.
  * @lpfc_cmd: The scsi command which needs to send.
  * @pnode: Pointer to lpfc_nodelist.
@@ -2470,7 +2461,7 @@ lpfc_fcpcmd_to_iocb(uint8_t *data, struct fcp_cmnd *fcp_cmnd)
  * to transfer for device with SLI3 interface spec.
  **/
 static void
-lpfc_scsi_prep_cmnd_s3(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
+lpfc_scsi_prep_cmnd(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
                     struct lpfc_nodelist *pnode)
 {
         struct lpfc_hba *phba = vport->phba;
@@ -2558,46 +2549,7 @@ lpfc_scsi_prep_cmnd_s3(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
 }
 
 /**
- * lpfc_scsi_prep_cmnd_s4 - Convert scsi cmnd to FCP infor unit for SLI4 dev
- * @vport: The virtual port for which this call is being executed.
- * @lpfc_cmd: The scsi command which needs to send.
- * @pnode: Pointer to lpfc_nodelist.
- *
- * This routine initializes fcp_cmnd and iocb data structure from scsi command
- * to transfer for device with SLI4 interface spec.
- **/
-static void
-lpfc_scsi_prep_cmnd_s4(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
-                       struct lpfc_nodelist *pnode)
-{
-        /*
-         * The prep cmnd routines do not touch the sgl or its
-         * entries. We may not have to do anything different.
-         * I will leave this function in place until we can
-         * run some IO through the driver and determine if changes
-         * are needed.
-         */
-        return lpfc_scsi_prep_cmnd_s3(vport, lpfc_cmd, pnode);
-}
-
-/**
- * lpfc_scsi_prep_cmnd - Wrapper func for convert scsi cmnd to FCP info unit
- * @vport: The virtual port for which this call is being executed.
- * @lpfc_cmd: The scsi command which needs to send.
- * @pnode: Pointer to lpfc_nodelist.
- *
- * This routine wraps the actual convert SCSI cmnd function pointer from
- * the lpfc_hba struct.
- **/
-static inline void
-lpfc_scsi_prep_cmnd(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
-                    struct lpfc_nodelist *pnode)
-{
-        vport->phba->lpfc_scsi_prep_cmnd(vport, lpfc_cmd, pnode);
-}
-
-/**
- * lpfc_scsi_prep_task_mgmt_cmnd_s3 - Convert SLI3 scsi TM cmd to FCP info unit
+ * lpfc_scsi_prep_task_mgmt_cmnd - Convert SLI3 scsi TM cmd to FCP info unit
  * @vport: The virtual port for which this call is being executed.
  * @lpfc_cmd: Pointer to lpfc_scsi_buf data structure.
  * @lun: Logical unit number.
@@ -2611,7 +2563,7 @@ lpfc_scsi_prep_cmnd(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
  *   1 - Success
  **/
 static int
-lpfc_scsi_prep_task_mgmt_cmd_s3(struct lpfc_vport *vport,
+lpfc_scsi_prep_task_mgmt_cmd(struct lpfc_vport *vport,
                              struct lpfc_scsi_buf *lpfc_cmd,
                              unsigned int lun,
                              uint8_t task_mgmt_cmd)
@@ -2653,68 +2605,13 @@ lpfc_scsi_prep_task_mgmt_cmd_s3(struct lpfc_vport *vport,
                  * The driver will provide the timeout mechanism.
                  */
                 piocb->ulpTimeout = 0;
-        } else {
+        } else
                 piocb->ulpTimeout = lpfc_cmd->timeout;
-        }
-
-        return 1;
-}
-
-/**
- * lpfc_scsi_prep_task_mgmt_cmnd_s4 - Convert SLI4 scsi TM cmd to FCP info unit
- * @vport: The virtual port for which this call is being executed.
- * @lpfc_cmd: Pointer to lpfc_scsi_buf data structure.
- * @lun: Logical unit number.
- * @task_mgmt_cmd: SCSI task management command.
- *
- * This routine creates FCP information unit corresponding to @task_mgmt_cmd
- * for device with SLI-4 interface spec.
- *
- * Return codes:
- *      0 - Error
- *      1 - Success
- **/
-static int
-lpfc_scsi_prep_task_mgmt_cmd_s4(struct lpfc_vport *vport,
-                                struct lpfc_scsi_buf *lpfc_cmd,
-                                unsigned int lun,
-                                uint8_t task_mgmt_cmd)
-{
-        /*
-         * The prep cmnd routines do not touch the sgl or its
-         * entries. We may not have to do anything different.
-         * I will leave this function in place until we can
-         * run some IO through the driver and determine if changes
-         * are needed.
-         */
-        return lpfc_scsi_prep_task_mgmt_cmd_s3(vport, lpfc_cmd, lun,
-                                                task_mgmt_cmd);
-}
 
-/**
- * lpfc_scsi_prep_task_mgmt_cmnd - Wrapper func convert scsi TM cmd to FCP info
- * @vport: The virtual port for which this call is being executed.
- * @lpfc_cmd: Pointer to lpfc_scsi_buf data structure.
- * @lun: Logical unit number.
- * @task_mgmt_cmd: SCSI task management command.
- *
- * This routine wraps the actual convert SCSI TM to FCP information unit
- * function pointer from the lpfc_hba struct.
- *
- * Return codes:
- *      0 - Error
- *      1 - Success
- **/
-static inline int
-lpfc_scsi_prep_task_mgmt_cmd(struct lpfc_vport *vport,
-                             struct lpfc_scsi_buf *lpfc_cmd,
-                             unsigned int lun,
-                             uint8_t task_mgmt_cmd)
-{
-        struct lpfc_hba *phba = vport->phba;
+        if (vport->phba->sli_rev == LPFC_SLI_REV4)
+                lpfc_sli4_set_rsp_sgl_last(vport->phba, lpfc_cmd);
 
-        return phba->lpfc_scsi_prep_task_mgmt_cmd(vport, lpfc_cmd, lun,
-                                                  task_mgmt_cmd);
+        return 1;
 }
 
 /**
@@ -2730,23 +2627,19 @@ int
 lpfc_scsi_api_table_setup(struct lpfc_hba *phba, uint8_t dev_grp)
 {
 
+        phba->lpfc_scsi_unprep_dma_buf = lpfc_scsi_unprep_dma_buf;
+        phba->lpfc_scsi_prep_cmnd = lpfc_scsi_prep_cmnd;
+        phba->lpfc_get_scsi_buf = lpfc_get_scsi_buf;
+
         switch (dev_grp) {
         case LPFC_PCI_DEV_LP:
                 phba->lpfc_new_scsi_buf = lpfc_new_scsi_buf_s3;
                 phba->lpfc_scsi_prep_dma_buf = lpfc_scsi_prep_dma_buf_s3;
-                phba->lpfc_scsi_prep_cmnd = lpfc_scsi_prep_cmnd_s3;
-                phba->lpfc_scsi_unprep_dma_buf = lpfc_scsi_unprep_dma_buf_s3;
-                phba->lpfc_scsi_prep_task_mgmt_cmd =
-                                        lpfc_scsi_prep_task_mgmt_cmd_s3;
                 phba->lpfc_release_scsi_buf = lpfc_release_scsi_buf_s3;
                 break;
         case LPFC_PCI_DEV_OC:
                 phba->lpfc_new_scsi_buf = lpfc_new_scsi_buf_s4;
                 phba->lpfc_scsi_prep_dma_buf = lpfc_scsi_prep_dma_buf_s4;
-                phba->lpfc_scsi_prep_cmnd = lpfc_scsi_prep_cmnd_s4;
-                phba->lpfc_scsi_unprep_dma_buf = lpfc_scsi_unprep_dma_buf_s4;
-                phba->lpfc_scsi_prep_task_mgmt_cmd =
-                                        lpfc_scsi_prep_task_mgmt_cmd_s4;
                 phba->lpfc_release_scsi_buf = lpfc_release_scsi_buf_s4;
                 break;
         default:
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index ff04daf18f48..b8cf0a1b1382 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -4211,27 +4211,6 @@ lpfc_sli4_read_rev(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq,
                 return -EIO;
         }
 
-        lpfc_printf_log(phba, KERN_INFO, LOG_MBOX | LOG_SLI,
-                        "(%d):0380 Mailbox cmd x%x Status x%x "
-                        "Data: x%x x%x x%x x%x x%x x%x x%x x%x x%x "
-                        "x%x x%x x%x x%x x%x x%x x%x x%x x%x "
-                        "CQ: x%x x%x x%x x%x\n",
-                        mboxq->vport ? mboxq->vport->vpi : 0,
-                        bf_get(lpfc_mqe_command, mqe),
-                        bf_get(lpfc_mqe_status, mqe),
-                        mqe->un.mb_words[0], mqe->un.mb_words[1],
-                        mqe->un.mb_words[2], mqe->un.mb_words[3],
-                        mqe->un.mb_words[4], mqe->un.mb_words[5],
-                        mqe->un.mb_words[6], mqe->un.mb_words[7],
-                        mqe->un.mb_words[8], mqe->un.mb_words[9],
-                        mqe->un.mb_words[10], mqe->un.mb_words[11],
-                        mqe->un.mb_words[12], mqe->un.mb_words[13],
-                        mqe->un.mb_words[14], mqe->un.mb_words[15],
-                        mqe->un.mb_words[16], mqe->un.mb_words[50],
-                        mboxq->mcqe.word0,
-                        mboxq->mcqe.mcqe_tag0,  mboxq->mcqe.mcqe_tag1,
-                        mboxq->mcqe.trailer);
-
         /*
          * The available vpd length cannot be bigger than the
          * DMA buffer passed to the port.  Catch the less than
@@ -4337,21 +4316,18 @@ lpfc_sli4_hba_setup(struct lpfc_hba *phba)
                 goto out_free_vpd;
 
         mqe = &mboxq->u.mqe;
-        if ((bf_get(lpfc_mbx_rd_rev_sli_lvl,
-                    &mqe->un.read_rev) != LPFC_SLI_REV4) ||
-            (bf_get(lpfc_mbx_rd_rev_fcoe, &mqe->un.read_rev) == 0)) {
+        phba->sli_rev = bf_get(lpfc_mbx_rd_rev_sli_lvl, &mqe->un.read_rev);
+        if (bf_get(lpfc_mbx_rd_rev_fcoe, &mqe->un.read_rev))
+                phba->hba_flag |= HBA_FCOE_SUPPORT;
+        if (phba->sli_rev != LPFC_SLI_REV4 ||
+            !(phba->hba_flag & HBA_FCOE_SUPPORT)) {
                 lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
                         "0376 READ_REV Error. SLI Level %d "
                         "FCoE enabled %d\n",
-                        bf_get(lpfc_mbx_rd_rev_sli_lvl, &mqe->un.read_rev),
-                        bf_get(lpfc_mbx_rd_rev_fcoe, &mqe->un.read_rev));
+                        phba->sli_rev, phba->hba_flag & HBA_FCOE_SUPPORT);
                 rc = -EIO;
                 goto out_free_vpd;
         }
-        /* Single threaded at this point, no need for lock */
-        spin_lock_irq(&phba->hbalock);
-        phba->hba_flag |= HBA_FCOE_SUPPORT;
-        spin_unlock_irq(&phba->hbalock);
         /*
          * Evaluate the read rev and vpd data. Populate the driver
          * state with the results. If this routine fails, the failure
@@ -4365,8 +4341,32 @@ lpfc_sli4_hba_setup(struct lpfc_hba *phba)
                 rc = 0;
         }
 
-        /* By now, we should determine the SLI revision, hard code for now */
-        phba->sli_rev = LPFC_SLI_REV4;
+        /* Save information as VPD data */
+        phba->vpd.rev.biuRev = mqe->un.read_rev.first_hw_rev;
+        phba->vpd.rev.smRev = mqe->un.read_rev.second_hw_rev;
+        phba->vpd.rev.endecRev = mqe->un.read_rev.third_hw_rev;
+        phba->vpd.rev.fcphHigh = bf_get(lpfc_mbx_rd_rev_fcph_high,
+                                         &mqe->un.read_rev);
+        phba->vpd.rev.fcphLow = bf_get(lpfc_mbx_rd_rev_fcph_low,
+                                       &mqe->un.read_rev);
+        phba->vpd.rev.feaLevelHigh = bf_get(lpfc_mbx_rd_rev_ftr_lvl_high,
+                                            &mqe->un.read_rev);
+        phba->vpd.rev.feaLevelLow = bf_get(lpfc_mbx_rd_rev_ftr_lvl_low,
+                                           &mqe->un.read_rev);
+        phba->vpd.rev.sli1FwRev = mqe->un.read_rev.fw_id_rev;
+        memcpy(phba->vpd.rev.sli1FwName, mqe->un.read_rev.fw_name, 16);
+        phba->vpd.rev.sli2FwRev = mqe->un.read_rev.ulp_fw_id_rev;
+        memcpy(phba->vpd.rev.sli2FwName, mqe->un.read_rev.ulp_fw_name, 16);
+        phba->vpd.rev.opFwRev = mqe->un.read_rev.fw_id_rev;
+        memcpy(phba->vpd.rev.opFwName, mqe->un.read_rev.fw_name, 16);
+        lpfc_printf_log(phba, KERN_INFO, LOG_MBOX | LOG_SLI,
+                        "(%d):0380 READ_REV Status x%x "
+                        "fw_rev:%s fcphHi:%x fcphLo:%x flHi:%x flLo:%x\n",
+                        mboxq->vport ? mboxq->vport->vpi : 0,
+                        bf_get(lpfc_mqe_status, mqe),
+                        phba->vpd.rev.opFwName,
+                        phba->vpd.rev.fcphHigh, phba->vpd.rev.fcphLow,
+                        phba->vpd.rev.feaLevelHigh, phba->vpd.rev.feaLevelLow);
 
         /*
          * Discover the port's supported feature set and match it against the
@@ -5030,6 +5030,92 @@ out_not_finished:
 }
 
 /**
+ * lpfc_sli4_async_mbox_block - Block posting SLI4 asynchronous mailbox command
+ * @phba: Pointer to HBA context object.
+ *
+ * The function blocks the posting of SLI4 asynchronous mailbox commands from
+ * the driver internal pending mailbox queue. It will then try to wait out the
+ * possible outstanding mailbox command before return.
+ *
+ * Returns:
+ *      0 - the outstanding mailbox command completed; otherwise, the wait for
+ *      the outstanding mailbox command timed out.
+ **/
+static int
+lpfc_sli4_async_mbox_block(struct lpfc_hba *phba)
+{
+        struct lpfc_sli *psli = &phba->sli;
+        uint8_t actcmd = MBX_HEARTBEAT;
+        int rc = 0;
+        unsigned long timeout;
+
+        /* Mark the asynchronous mailbox command posting as blocked */
+        spin_lock_irq(&phba->hbalock);
+        psli->sli_flag |= LPFC_SLI_ASYNC_MBX_BLK;
+        if (phba->sli.mbox_active)
+                actcmd = phba->sli.mbox_active->u.mb.mbxCommand;
+        spin_unlock_irq(&phba->hbalock);
+        /* Determine how long we might wait for the active mailbox
+         * command to be gracefully completed by firmware.
+         */
+        timeout = msecs_to_jiffies(lpfc_mbox_tmo_val(phba, actcmd) * 1000) +
+                                   jiffies;
+        /* Wait for the outstnading mailbox command to complete */
+        while (phba->sli.mbox_active) {
+                /* Check active mailbox complete status every 2ms */
+                msleep(2);
+                if (time_after(jiffies, timeout)) {
+                        /* Timeout, marked the outstanding cmd not complete */
+                        rc = 1;
+                        break;
+                }
+        }
+
+        /* Can not cleanly block async mailbox command, fails it */
+        if (rc) {
+                spin_lock_irq(&phba->hbalock);
+                psli->sli_flag &= ~LPFC_SLI_ASYNC_MBX_BLK;
+                spin_unlock_irq(&phba->hbalock);
+        }
+        return rc;
+}
+
+/**
+ * lpfc_sli4_async_mbox_unblock - Block posting SLI4 async mailbox command
+ * @phba: Pointer to HBA context object.
+ *
+ * The function unblocks and resume posting of SLI4 asynchronous mailbox
+ * commands from the driver internal pending mailbox queue. It makes sure
+ * that there is no outstanding mailbox command before resuming posting
+ * asynchronous mailbox commands. If, for any reason, there is outstanding
+ * mailbox command, it will try to wait it out before resuming asynchronous
+ * mailbox command posting.
+ **/
+static void
+lpfc_sli4_async_mbox_unblock(struct lpfc_hba *phba)
+{
+        struct lpfc_sli *psli = &phba->sli;
+
+        spin_lock_irq(&phba->hbalock);
+        if (!(psli->sli_flag & LPFC_SLI_ASYNC_MBX_BLK)) {
+                /* Asynchronous mailbox posting is not blocked, do nothing */
+                spin_unlock_irq(&phba->hbalock);
+                return;
+        }
+
+        /* Outstanding synchronous mailbox command is guaranteed to be done,
+         * successful or timeout, after timing-out the outstanding mailbox
+         * command shall always be removed, so just unblock posting async
+         * mailbox command and resume
+         */
+        psli->sli_flag &= ~LPFC_SLI_ASYNC_MBX_BLK;
+        spin_unlock_irq(&phba->hbalock);
+
+        /* wake up worker thread to post asynchronlous mailbox command */
+        lpfc_worker_wake_up(phba);
+}
+
+/**
  * lpfc_sli4_post_sync_mbox - Post an SLI4 mailbox to the bootstrap mailbox
  * @phba: Pointer to HBA context object.
  * @mboxq: Pointer to mailbox object.
@@ -5204,14 +5290,35 @@ lpfc_sli_issue_mbox_s4(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq,
                                         psli->sli_flag, flag);
                 return rc;
         } else if (flag == MBX_POLL) {
-                lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
-                                "(%d):2542 Mailbox command x%x (x%x) "
-                                "cannot issue Data: x%x x%x\n",
+                lpfc_printf_log(phba, KERN_WARNING, LOG_MBOX | LOG_SLI,
+                                "(%d):2542 Try to issue mailbox command "
+                                "x%x (x%x) synchronously ahead of async"
+                                "mailbox command queue: x%x x%x\n",
                                 mboxq->vport ? mboxq->vport->vpi : 0,
                                 mboxq->u.mb.mbxCommand,
                                 lpfc_sli4_mbox_opcode_get(phba, mboxq),
                                 psli->sli_flag, flag);
-                return -EIO;
+                /* Try to block the asynchronous mailbox posting */
+                rc = lpfc_sli4_async_mbox_block(phba);
+                if (!rc) {
+                        /* Successfully blocked, now issue sync mbox cmd */
+                        rc = lpfc_sli4_post_sync_mbox(phba, mboxq);
+                        if (rc != MBX_SUCCESS)
+                                lpfc_printf_log(phba, KERN_ERR,
+                                                LOG_MBOX | LOG_SLI,
+                                                "(%d):2597 Mailbox command "
+                                                "x%x (x%x) cannot issue "
+                                                "Data: x%x x%x\n",
+                                                mboxq->vport ?
+                                                mboxq->vport->vpi : 0,
+                                                mboxq->u.mb.mbxCommand,
+                                                lpfc_sli4_mbox_opcode_get(phba,
+                                                                mboxq),
+                                                psli->sli_flag, flag);
+                        /* Unblock the async mailbox posting afterward */
+                        lpfc_sli4_async_mbox_unblock(phba);
+                }
+                return rc;
         }
 
         /* Now, interrupt mode asynchrous mailbox command */
@@ -5814,11 +5921,6 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq,
                 bf_set(lpfc_wqe_gen_context, &wqe->generic,
                                 iocbq->iocb.ulpContext);
 
-                if (iocbq->vport->fc_myDID != 0) {
-                        bf_set(els_req64_sid, &wqe->els_req,
-                                 iocbq->vport->fc_myDID);
-                        bf_set(els_req64_sp, &wqe->els_req, 1);
-                }
                 bf_set(lpfc_wqe_gen_ct, &wqe->generic, ct);
                 bf_set(lpfc_wqe_gen_pu, &wqe->generic, 0);
                 /* CCP CCPE PV PRI in word10 were set in the memcpy */
@@ -5877,14 +5979,19 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq,
                  * is set and we are sending our 2nd or greater command on
                  * this exchange.
                  */
+                /* Always open the exchange */
+                bf_set(wqe_xc, &wqe->fcp_iread.wqe_com, 0);
 
-        /* ALLOW read & write to fall through to ICMD64 */
+                wqe->words[10] &= 0xffff0000; /* zero out ebde count */
+                bf_set(lpfc_wqe_gen_pu, &wqe->generic, iocbq->iocb.ulpPU);
+                break;
         case CMD_FCP_ICMND64_CR:
                 /* Always open the exchange */
                 bf_set(wqe_xc, &wqe->fcp_iread.wqe_com, 0);
 
+                wqe->words[4] = 0;
                 wqe->words[10] &= 0xffff0000; /* zero out ebde count */
-                bf_set(lpfc_wqe_gen_pu, &wqe->generic, iocbq->iocb.ulpPU);
+                bf_set(lpfc_wqe_gen_pu, &wqe->generic, 0);
         break;
         case CMD_GEN_REQUEST64_CR:
                 /* word3 command length is described as byte offset to the
@@ -11020,10 +11127,7 @@ lpfc_sli4_post_rpi_hdr(struct lpfc_hba *phba, struct lpfc_rpi_hdr *rpi_page)
                rpi_page->start_rpi);
         hdr_tmpl->rpi_paddr_lo = putPaddrLow(rpi_page->dmabuf->phys);
         hdr_tmpl->rpi_paddr_hi = putPaddrHigh(rpi_page->dmabuf->phys);
-        if (!phba->sli4_hba.intr_enable)
-                rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
-        else
-                rc = lpfc_sli_issue_mbox_wait(phba, mboxq, mbox_tmo);
+        rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
         shdr = (union lpfc_sli4_cfg_shdr *) &hdr_tmpl->header.cfg_shdr;
         shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
         shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
diff --git a/drivers/scsi/lpfc/lpfc_sli4.h b/drivers/scsi/lpfc/lpfc_sli4.h
index 5196b46608d7..3b276b47d18f 100644
--- a/drivers/scsi/lpfc/lpfc_sli4.h
+++ b/drivers/scsi/lpfc/lpfc_sli4.h
@@ -229,7 +229,7 @@ struct lpfc_bmbx {
 
 #define LPFC_EQE_DEF_COUNT      1024
 #define LPFC_CQE_DEF_COUNT      256
-#define LPFC_WQE_DEF_COUNT      64
+#define LPFC_WQE_DEF_COUNT      256
 #define LPFC_MQE_DEF_COUNT      16
 #define LPFC_RQE_DEF_COUNT      512