aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/scsi/blz2060.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/blz2060.c')
-rw-r--r--drivers/scsi/blz2060.c306
1 files changed, 0 insertions, 306 deletions
diff --git a/drivers/scsi/blz2060.c b/drivers/scsi/blz2060.c
deleted file mode 100644
index b6203ec00961..000000000000
--- a/drivers/scsi/blz2060.c
+++ /dev/null
@@ -1,306 +0,0 @@
1/* blz2060.c: Driver for Blizzard 2060 SCSI Controller.
2 *
3 * Copyright (C) 1996 Jesper Skov (jskov@cygnus.co.uk)
4 *
5 * This driver is based on the CyberStorm driver, hence the occasional
6 * reference to CyberStorm.
7 */
8
9/* TODO:
10 *
11 * 1) Figure out how to make a cleaner merge with the sparc driver with regard
12 * to the caches and the Sparc MMU mapping.
13 * 2) Make as few routines required outside the generic driver. A lot of the
14 * routines in this file used to be inline!
15 */
16
17#include <linux/module.h>
18
19#include <linux/init.h>
20#include <linux/kernel.h>
21#include <linux/delay.h>
22#include <linux/types.h>
23#include <linux/string.h>
24#include <linux/slab.h>
25#include <linux/blkdev.h>
26#include <linux/proc_fs.h>
27#include <linux/stat.h>
28#include <linux/interrupt.h>
29
30#include "scsi.h"
31#include <scsi/scsi_host.h>
32#include "NCR53C9x.h"
33
34#include <linux/zorro.h>
35#include <asm/irq.h>
36#include <asm/amigaints.h>
37#include <asm/amigahw.h>
38
39#include <asm/pgtable.h>
40
41/* The controller registers can be found in the Z2 config area at these
42 * offsets:
43 */
44#define BLZ2060_ESP_ADDR 0x1ff00
45#define BLZ2060_DMA_ADDR 0x1ffe0
46
47
48/* The Blizzard 2060 DMA interface
49 * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
50 * Only two things can be programmed in the Blizzard DMA:
51 * 1) The data direction is controlled by the status of bit 31 (1 = write)
52 * 2) The source/dest address (word aligned, shifted one right) in bits 30-0
53 *
54 * Figure out interrupt status by reading the ESP status byte.
55 */
56struct blz2060_dma_registers {
57 volatile unsigned char dma_led_ctrl; /* DMA led control [0x000] */
58 unsigned char dmapad1[0x0f];
59 volatile unsigned char dma_addr0; /* DMA address (MSB) [0x010] */
60 unsigned char dmapad2[0x03];
61 volatile unsigned char dma_addr1; /* DMA address [0x014] */
62 unsigned char dmapad3[0x03];
63 volatile unsigned char dma_addr2; /* DMA address [0x018] */
64 unsigned char dmapad4[0x03];
65 volatile unsigned char dma_addr3; /* DMA address (LSB) [0x01c] */
66};
67
68#define BLZ2060_DMA_WRITE 0x80000000
69
70/* DMA control bits */
71#define BLZ2060_DMA_LED 0x02 /* HD led control 1 = off */
72
73static int dma_bytes_sent(struct NCR_ESP *esp, int fifo_count);
74static int dma_can_transfer(struct NCR_ESP *esp, Scsi_Cmnd *sp);
75static void dma_dump_state(struct NCR_ESP *esp);
76static void dma_init_read(struct NCR_ESP *esp, __u32 addr, int length);
77static void dma_init_write(struct NCR_ESP *esp, __u32 addr, int length);
78static void dma_ints_off(struct NCR_ESP *esp);
79static void dma_ints_on(struct NCR_ESP *esp);
80static int dma_irq_p(struct NCR_ESP *esp);
81static void dma_led_off(struct NCR_ESP *esp);
82static void dma_led_on(struct NCR_ESP *esp);
83static int dma_ports_p(struct NCR_ESP *esp);
84static void dma_setup(struct NCR_ESP *esp, __u32 addr, int count, int write);
85
86static volatile unsigned char cmd_buffer[16];
87 /* This is where all commands are put
88 * before they are transferred to the ESP chip
89 * via PIO.
90 */
91
92/***************************************************************** Detection */
93int __init blz2060_esp_detect(struct scsi_host_template *tpnt)
94{
95 struct NCR_ESP *esp;
96 struct zorro_dev *z = NULL;
97 unsigned long address;
98
99 if ((z = zorro_find_device(ZORRO_PROD_PHASE5_BLIZZARD_2060, z))) {
100 unsigned long board = z->resource.start;
101 if (request_mem_region(board+BLZ2060_ESP_ADDR,
102 sizeof(struct ESP_regs), "NCR53C9x")) {
103 esp = esp_allocate(tpnt, (void *)board + BLZ2060_ESP_ADDR, 0);
104
105 /* Do command transfer with programmed I/O */
106 esp->do_pio_cmds = 1;
107
108 /* Required functions */
109 esp->dma_bytes_sent = &dma_bytes_sent;
110 esp->dma_can_transfer = &dma_can_transfer;
111 esp->dma_dump_state = &dma_dump_state;
112 esp->dma_init_read = &dma_init_read;
113 esp->dma_init_write = &dma_init_write;
114 esp->dma_ints_off = &dma_ints_off;
115 esp->dma_ints_on = &dma_ints_on;
116 esp->dma_irq_p = &dma_irq_p;
117 esp->dma_ports_p = &dma_ports_p;
118 esp->dma_setup = &dma_setup;
119
120 /* Optional functions */
121 esp->dma_barrier = 0;
122 esp->dma_drain = 0;
123 esp->dma_invalidate = 0;
124 esp->dma_irq_entry = 0;
125 esp->dma_irq_exit = 0;
126 esp->dma_led_on = &dma_led_on;
127 esp->dma_led_off = &dma_led_off;
128 esp->dma_poll = 0;
129 esp->dma_reset = 0;
130
131 /* SCSI chip speed */
132 esp->cfreq = 40000000;
133
134 /* The DMA registers on the Blizzard are mapped
135 * relative to the device (i.e. in the same Zorro
136 * I/O block).
137 */
138 address = (unsigned long)ZTWO_VADDR(board);
139 esp->dregs = (void *)(address + BLZ2060_DMA_ADDR);
140
141 /* ESP register base */
142 esp->eregs = (struct ESP_regs *)(address + BLZ2060_ESP_ADDR);
143
144 /* Set the command buffer */
145 esp->esp_command = cmd_buffer;
146 esp->esp_command_dvma = virt_to_bus((void *)cmd_buffer);
147
148 esp->irq = IRQ_AMIGA_PORTS;
149 request_irq(IRQ_AMIGA_PORTS, esp_intr, IRQF_SHARED,
150 "Blizzard 2060 SCSI", esp->ehost);
151
152 /* Figure out our scsi ID on the bus */
153 esp->scsi_id = 7;
154
155 /* We don't have a differential SCSI-bus. */
156 esp->diff = 0;
157
158 esp_initialize(esp);
159
160 printk("ESP: Total of %d ESP hosts found, %d actually in use.\n", nesps, esps_in_use);
161 esps_running = esps_in_use;
162 return esps_in_use;
163 }
164 }
165 return 0;
166}
167
168/************************************************************* DMA Functions */
169static int dma_bytes_sent(struct NCR_ESP *esp, int fifo_count)
170{
171 /* Since the Blizzard DMA is fully dedicated to the ESP chip,
172 * the number of bytes sent (to the ESP chip) equals the number
173 * of bytes in the FIFO - there is no buffering in the DMA controller.
174 * XXXX Do I read this right? It is from host to ESP, right?
175 */
176 return fifo_count;
177}
178
179static int dma_can_transfer(struct NCR_ESP *esp, Scsi_Cmnd *sp)
180{
181 /* I don't think there's any limit on the Blizzard DMA. So we use what
182 * the ESP chip can handle (24 bit).
183 */
184 unsigned long sz = sp->SCp.this_residual;
185 if(sz > 0x1000000)
186 sz = 0x1000000;
187 return sz;
188}
189
190static void dma_dump_state(struct NCR_ESP *esp)
191{
192 ESPLOG(("intreq:<%04x>, intena:<%04x>\n",
193 amiga_custom.intreqr, amiga_custom.intenar));
194}
195
196static void dma_init_read(struct NCR_ESP *esp, __u32 addr, int length)
197{
198 struct blz2060_dma_registers *dregs =
199 (struct blz2060_dma_registers *) (esp->dregs);
200
201 cache_clear(addr, length);
202
203 addr >>= 1;
204 addr &= ~(BLZ2060_DMA_WRITE);
205 dregs->dma_addr3 = (addr ) & 0xff;
206 dregs->dma_addr2 = (addr >> 8) & 0xff;
207 dregs->dma_addr1 = (addr >> 16) & 0xff;
208 dregs->dma_addr0 = (addr >> 24) & 0xff;
209}
210
211static void dma_init_write(struct NCR_ESP *esp, __u32 addr, int length)
212{
213 struct blz2060_dma_registers *dregs =
214 (struct blz2060_dma_registers *) (esp->dregs);
215
216 cache_push(addr, length);
217
218 addr >>= 1;
219 addr |= BLZ2060_DMA_WRITE;
220 dregs->dma_addr3 = (addr ) & 0xff;
221 dregs->dma_addr2 = (addr >> 8) & 0xff;
222 dregs->dma_addr1 = (addr >> 16) & 0xff;
223 dregs->dma_addr0 = (addr >> 24) & 0xff;
224}
225
226static void dma_ints_off(struct NCR_ESP *esp)
227{
228 disable_irq(esp->irq);
229}
230
231static void dma_ints_on(struct NCR_ESP *esp)
232{
233 enable_irq(esp->irq);
234}
235
236static int dma_irq_p(struct NCR_ESP *esp)
237{
238 return (esp_read(esp->eregs->esp_status) & ESP_STAT_INTR);
239}
240
241static void dma_led_off(struct NCR_ESP *esp)
242{
243 ((struct blz2060_dma_registers *) (esp->dregs))->dma_led_ctrl =
244 BLZ2060_DMA_LED;
245}
246
247static void dma_led_on(struct NCR_ESP *esp)
248{
249 ((struct blz2060_dma_registers *) (esp->dregs))->dma_led_ctrl = 0;
250}
251
252static int dma_ports_p(struct NCR_ESP *esp)
253{
254 return ((amiga_custom.intenar) & IF_PORTS);
255}
256
257static void dma_setup(struct NCR_ESP *esp, __u32 addr, int count, int write)
258{
259 /* On the Sparc, DMA_ST_WRITE means "move data from device to memory"
260 * so when (write) is true, it actually means READ!
261 */
262 if(write){
263 dma_init_read(esp, addr, count);
264 } else {
265 dma_init_write(esp, addr, count);
266 }
267}
268
269#define HOSTS_C
270
271int blz2060_esp_release(struct Scsi_Host *instance)
272{
273#ifdef MODULE
274 unsigned long address = (unsigned long)((struct NCR_ESP *)instance->hostdata)->edev;
275
276 esp_deallocate((struct NCR_ESP *)instance->hostdata);
277 esp_release();
278 release_mem_region(address, sizeof(struct ESP_regs));
279 free_irq(IRQ_AMIGA_PORTS, esp_intr);
280#endif
281 return 1;
282}
283
284
285static struct scsi_host_template driver_template = {
286 .proc_name = "esp-blz2060",
287 .proc_info = esp_proc_info,
288 .name = "Blizzard2060 SCSI",
289 .detect = blz2060_esp_detect,
290 .slave_alloc = esp_slave_alloc,
291 .slave_destroy = esp_slave_destroy,
292 .release = blz2060_esp_release,
293 .queuecommand = esp_queue,
294 .eh_abort_handler = esp_abort,
295 .eh_bus_reset_handler = esp_reset,
296 .can_queue = 7,
297 .this_id = 7,
298 .sg_tablesize = SG_ALL,
299 .cmd_per_lun = 1,
300 .use_clustering = ENABLE_CLUSTERING
301};
302
303
304#include "scsi_module.c"
305
306MODULE_LICENSE("GPL");