diff options
Diffstat (limited to 'drivers/scsi/aic94xx')
-rw-r--r-- | drivers/scsi/aic94xx/aic94xx_hwi.h | 3 | ||||
-rw-r--r-- | drivers/scsi/aic94xx/aic94xx_init.c | 184 | ||||
-rw-r--r-- | drivers/scsi/aic94xx/aic94xx_sds.c | 389 | ||||
-rw-r--r-- | drivers/scsi/aic94xx/aic94xx_sds.h | 121 |
4 files changed, 697 insertions, 0 deletions
diff --git a/drivers/scsi/aic94xx/aic94xx_hwi.h b/drivers/scsi/aic94xx/aic94xx_hwi.h index 491e5d8a98bc..150f6706d23f 100644 --- a/drivers/scsi/aic94xx/aic94xx_hwi.h +++ b/drivers/scsi/aic94xx/aic94xx_hwi.h | |||
@@ -72,6 +72,7 @@ struct flash_struct { | |||
72 | u8 manuf; | 72 | u8 manuf; |
73 | u8 dev_id; | 73 | u8 dev_id; |
74 | u8 sec_prot; | 74 | u8 sec_prot; |
75 | u8 method; | ||
75 | 76 | ||
76 | u32 dir_offs; | 77 | u32 dir_offs; |
77 | }; | 78 | }; |
@@ -216,6 +217,8 @@ struct asd_ha_struct { | |||
216 | struct dma_pool *scb_pool; | 217 | struct dma_pool *scb_pool; |
217 | 218 | ||
218 | struct asd_seq_data seq; /* sequencer related */ | 219 | struct asd_seq_data seq; /* sequencer related */ |
220 | u32 bios_status; | ||
221 | const struct firmware *bios_image; | ||
219 | }; | 222 | }; |
220 | 223 | ||
221 | /* ---------- Common macros ---------- */ | 224 | /* ---------- Common macros ---------- */ |
diff --git a/drivers/scsi/aic94xx/aic94xx_init.c b/drivers/scsi/aic94xx/aic94xx_init.c index b70d6e7f96e9..de0667011e13 100644 --- a/drivers/scsi/aic94xx/aic94xx_init.c +++ b/drivers/scsi/aic94xx/aic94xx_init.c | |||
@@ -29,6 +29,7 @@ | |||
29 | #include <linux/kernel.h> | 29 | #include <linux/kernel.h> |
30 | #include <linux/pci.h> | 30 | #include <linux/pci.h> |
31 | #include <linux/delay.h> | 31 | #include <linux/delay.h> |
32 | #include <linux/firmware.h> | ||
32 | 33 | ||
33 | #include <scsi/scsi_host.h> | 34 | #include <scsi/scsi_host.h> |
34 | 35 | ||
@@ -36,6 +37,7 @@ | |||
36 | #include "aic94xx_reg.h" | 37 | #include "aic94xx_reg.h" |
37 | #include "aic94xx_hwi.h" | 38 | #include "aic94xx_hwi.h" |
38 | #include "aic94xx_seq.h" | 39 | #include "aic94xx_seq.h" |
40 | #include "aic94xx_sds.h" | ||
39 | 41 | ||
40 | /* The format is "version.release.patchlevel" */ | 42 | /* The format is "version.release.patchlevel" */ |
41 | #define ASD_DRIVER_VERSION "1.0.3" | 43 | #define ASD_DRIVER_VERSION "1.0.3" |
@@ -313,6 +315,181 @@ static ssize_t asd_show_dev_pcba_sn(struct device *dev, | |||
313 | } | 315 | } |
314 | static DEVICE_ATTR(pcba_sn, S_IRUGO, asd_show_dev_pcba_sn, NULL); | 316 | static DEVICE_ATTR(pcba_sn, S_IRUGO, asd_show_dev_pcba_sn, NULL); |
315 | 317 | ||
318 | #define FLASH_CMD_NONE 0x00 | ||
319 | #define FLASH_CMD_UPDATE 0x01 | ||
320 | #define FLASH_CMD_VERIFY 0x02 | ||
321 | |||
322 | struct flash_command { | ||
323 | u8 command[8]; | ||
324 | int code; | ||
325 | }; | ||
326 | |||
327 | static struct flash_command flash_command_table[] = | ||
328 | { | ||
329 | {"verify", FLASH_CMD_VERIFY}, | ||
330 | {"update", FLASH_CMD_UPDATE}, | ||
331 | {"", FLASH_CMD_NONE} /* Last entry should be NULL. */ | ||
332 | }; | ||
333 | |||
334 | struct error_bios { | ||
335 | char *reason; | ||
336 | int err_code; | ||
337 | }; | ||
338 | |||
339 | static struct error_bios flash_error_table[] = | ||
340 | { | ||
341 | {"Failed to open bios image file", FAIL_OPEN_BIOS_FILE}, | ||
342 | {"PCI ID mismatch", FAIL_CHECK_PCI_ID}, | ||
343 | {"Checksum mismatch", FAIL_CHECK_SUM}, | ||
344 | {"Unknown Error", FAIL_UNKNOWN}, | ||
345 | {"Failed to verify.", FAIL_VERIFY}, | ||
346 | {"Failed to reset flash chip.", FAIL_RESET_FLASH}, | ||
347 | {"Failed to find flash chip type.", FAIL_FIND_FLASH_ID}, | ||
348 | {"Failed to erash flash chip.", FAIL_ERASE_FLASH}, | ||
349 | {"Failed to program flash chip.", FAIL_WRITE_FLASH}, | ||
350 | {"Flash in progress", FLASH_IN_PROGRESS}, | ||
351 | {"Image file size Error", FAIL_FILE_SIZE}, | ||
352 | {"Input parameter error", FAIL_PARAMETERS}, | ||
353 | {"Out of memory", FAIL_OUT_MEMORY}, | ||
354 | {"OK", 0} /* Last entry err_code = 0. */ | ||
355 | }; | ||
356 | |||
357 | static ssize_t asd_store_update_bios(struct device *dev, | ||
358 | struct device_attribute *attr, | ||
359 | const char *buf, size_t count) | ||
360 | { | ||
361 | struct asd_ha_struct *asd_ha = dev_to_asd_ha(dev); | ||
362 | char *cmd_ptr, *filename_ptr; | ||
363 | struct bios_file_header header, *hdr_ptr; | ||
364 | int res, i; | ||
365 | u32 csum = 0; | ||
366 | int flash_command = FLASH_CMD_NONE; | ||
367 | int err = 0; | ||
368 | |||
369 | cmd_ptr = kzalloc(count*2, GFP_KERNEL); | ||
370 | |||
371 | if (!cmd_ptr) { | ||
372 | err = FAIL_OUT_MEMORY; | ||
373 | goto out; | ||
374 | } | ||
375 | |||
376 | filename_ptr = cmd_ptr + count; | ||
377 | res = sscanf(buf, "%s %s", cmd_ptr, filename_ptr); | ||
378 | if (res != 2) { | ||
379 | err = FAIL_PARAMETERS; | ||
380 | goto out1; | ||
381 | } | ||
382 | |||
383 | for (i = 0; flash_command_table[i].code != FLASH_CMD_NONE; i++) { | ||
384 | if (!memcmp(flash_command_table[i].command, | ||
385 | cmd_ptr, strlen(cmd_ptr))) { | ||
386 | flash_command = flash_command_table[i].code; | ||
387 | break; | ||
388 | } | ||
389 | } | ||
390 | if (flash_command == FLASH_CMD_NONE) { | ||
391 | err = FAIL_PARAMETERS; | ||
392 | goto out1; | ||
393 | } | ||
394 | |||
395 | if (asd_ha->bios_status == FLASH_IN_PROGRESS) { | ||
396 | err = FLASH_IN_PROGRESS; | ||
397 | goto out1; | ||
398 | } | ||
399 | err = request_firmware(&asd_ha->bios_image, | ||
400 | filename_ptr, | ||
401 | &asd_ha->pcidev->dev); | ||
402 | if (err) { | ||
403 | asd_printk("Failed to load bios image file %s, error %d\n", | ||
404 | filename_ptr, err); | ||
405 | err = FAIL_OPEN_BIOS_FILE; | ||
406 | goto out1; | ||
407 | } | ||
408 | |||
409 | hdr_ptr = (struct bios_file_header *)asd_ha->bios_image->data; | ||
410 | |||
411 | if ((hdr_ptr->contrl_id.vendor != asd_ha->pcidev->vendor || | ||
412 | hdr_ptr->contrl_id.device != asd_ha->pcidev->device) && | ||
413 | (hdr_ptr->contrl_id.sub_vendor != asd_ha->pcidev->vendor || | ||
414 | hdr_ptr->contrl_id.sub_device != asd_ha->pcidev->device)) { | ||
415 | |||
416 | ASD_DPRINTK("The PCI vendor or device id does not match\n"); | ||
417 | ASD_DPRINTK("vendor=%x dev=%x sub_vendor=%x sub_dev=%x" | ||
418 | " pci vendor=%x pci dev=%x\n", | ||
419 | hdr_ptr->contrl_id.vendor, | ||
420 | hdr_ptr->contrl_id.device, | ||
421 | hdr_ptr->contrl_id.sub_vendor, | ||
422 | hdr_ptr->contrl_id.sub_device, | ||
423 | asd_ha->pcidev->vendor, | ||
424 | asd_ha->pcidev->device); | ||
425 | err = FAIL_CHECK_PCI_ID; | ||
426 | goto out2; | ||
427 | } | ||
428 | |||
429 | if (hdr_ptr->filelen != asd_ha->bios_image->size) { | ||
430 | err = FAIL_FILE_SIZE; | ||
431 | goto out2; | ||
432 | } | ||
433 | |||
434 | /* calculate checksum */ | ||
435 | for (i = 0; i < hdr_ptr->filelen; i++) | ||
436 | csum += asd_ha->bios_image->data[i]; | ||
437 | |||
438 | if ((csum & 0x0000ffff) != hdr_ptr->checksum) { | ||
439 | ASD_DPRINTK("BIOS file checksum mismatch\n"); | ||
440 | err = FAIL_CHECK_SUM; | ||
441 | goto out2; | ||
442 | } | ||
443 | if (flash_command == FLASH_CMD_UPDATE) { | ||
444 | asd_ha->bios_status = FLASH_IN_PROGRESS; | ||
445 | err = asd_write_flash_seg(asd_ha, | ||
446 | &asd_ha->bios_image->data[sizeof(*hdr_ptr)], | ||
447 | 0, hdr_ptr->filelen-sizeof(*hdr_ptr)); | ||
448 | if (!err) | ||
449 | err = asd_verify_flash_seg(asd_ha, | ||
450 | &asd_ha->bios_image->data[sizeof(*hdr_ptr)], | ||
451 | 0, hdr_ptr->filelen-sizeof(*hdr_ptr)); | ||
452 | } else { | ||
453 | asd_ha->bios_status = FLASH_IN_PROGRESS; | ||
454 | err = asd_verify_flash_seg(asd_ha, | ||
455 | &asd_ha->bios_image->data[sizeof(header)], | ||
456 | 0, hdr_ptr->filelen-sizeof(header)); | ||
457 | } | ||
458 | |||
459 | out2: | ||
460 | release_firmware(asd_ha->bios_image); | ||
461 | out1: | ||
462 | kfree(cmd_ptr); | ||
463 | out: | ||
464 | asd_ha->bios_status = err; | ||
465 | |||
466 | if (!err) | ||
467 | return count; | ||
468 | else | ||
469 | return -err; | ||
470 | } | ||
471 | |||
472 | static ssize_t asd_show_update_bios(struct device *dev, | ||
473 | struct device_attribute *attr, char *buf) | ||
474 | { | ||
475 | int i; | ||
476 | struct asd_ha_struct *asd_ha = dev_to_asd_ha(dev); | ||
477 | |||
478 | for (i = 0; flash_error_table[i].err_code != 0; i++) { | ||
479 | if (flash_error_table[i].err_code == asd_ha->bios_status) | ||
480 | break; | ||
481 | } | ||
482 | if (asd_ha->bios_status != FLASH_IN_PROGRESS) | ||
483 | asd_ha->bios_status = FLASH_OK; | ||
484 | |||
485 | return snprintf(buf, PAGE_SIZE, "status=%x %s\n", | ||
486 | flash_error_table[i].err_code, | ||
487 | flash_error_table[i].reason); | ||
488 | } | ||
489 | |||
490 | static DEVICE_ATTR(update_bios, S_IRUGO|S_IWUGO, | ||
491 | asd_show_update_bios, asd_store_update_bios); | ||
492 | |||
316 | static int asd_create_dev_attrs(struct asd_ha_struct *asd_ha) | 493 | static int asd_create_dev_attrs(struct asd_ha_struct *asd_ha) |
317 | { | 494 | { |
318 | int err; | 495 | int err; |
@@ -328,9 +505,14 @@ static int asd_create_dev_attrs(struct asd_ha_struct *asd_ha) | |||
328 | err = device_create_file(&asd_ha->pcidev->dev, &dev_attr_pcba_sn); | 505 | err = device_create_file(&asd_ha->pcidev->dev, &dev_attr_pcba_sn); |
329 | if (err) | 506 | if (err) |
330 | goto err_biosb; | 507 | goto err_biosb; |
508 | err = device_create_file(&asd_ha->pcidev->dev, &dev_attr_update_bios); | ||
509 | if (err) | ||
510 | goto err_update_bios; | ||
331 | 511 | ||
332 | return 0; | 512 | return 0; |
333 | 513 | ||
514 | err_update_bios: | ||
515 | device_remove_file(&asd_ha->pcidev->dev, &dev_attr_pcba_sn); | ||
334 | err_biosb: | 516 | err_biosb: |
335 | device_remove_file(&asd_ha->pcidev->dev, &dev_attr_bios_build); | 517 | device_remove_file(&asd_ha->pcidev->dev, &dev_attr_bios_build); |
336 | err_rev: | 518 | err_rev: |
@@ -343,6 +525,7 @@ static void asd_remove_dev_attrs(struct asd_ha_struct *asd_ha) | |||
343 | device_remove_file(&asd_ha->pcidev->dev, &dev_attr_revision); | 525 | device_remove_file(&asd_ha->pcidev->dev, &dev_attr_revision); |
344 | device_remove_file(&asd_ha->pcidev->dev, &dev_attr_bios_build); | 526 | device_remove_file(&asd_ha->pcidev->dev, &dev_attr_bios_build); |
345 | device_remove_file(&asd_ha->pcidev->dev, &dev_attr_pcba_sn); | 527 | device_remove_file(&asd_ha->pcidev->dev, &dev_attr_pcba_sn); |
528 | device_remove_file(&asd_ha->pcidev->dev, &dev_attr_update_bios); | ||
346 | } | 529 | } |
347 | 530 | ||
348 | /* The first entry, 0, is used for dynamic ids, the rest for devices | 531 | /* The first entry, 0, is used for dynamic ids, the rest for devices |
@@ -589,6 +772,7 @@ static int __devinit asd_pci_probe(struct pci_dev *dev, | |||
589 | asd_ha->sas_ha.dev = &asd_ha->pcidev->dev; | 772 | asd_ha->sas_ha.dev = &asd_ha->pcidev->dev; |
590 | asd_ha->sas_ha.lldd_ha = asd_ha; | 773 | asd_ha->sas_ha.lldd_ha = asd_ha; |
591 | 774 | ||
775 | asd_ha->bios_status = FLASH_OK; | ||
592 | asd_ha->name = asd_dev->name; | 776 | asd_ha->name = asd_dev->name; |
593 | asd_printk("found %s, device %s\n", asd_ha->name, pci_name(dev)); | 777 | asd_printk("found %s, device %s\n", asd_ha->name, pci_name(dev)); |
594 | 778 | ||
diff --git a/drivers/scsi/aic94xx/aic94xx_sds.c b/drivers/scsi/aic94xx/aic94xx_sds.c index 06509bff71f7..2a4c933eb89c 100644 --- a/drivers/scsi/aic94xx/aic94xx_sds.c +++ b/drivers/scsi/aic94xx/aic94xx_sds.c | |||
@@ -30,6 +30,7 @@ | |||
30 | 30 | ||
31 | #include "aic94xx.h" | 31 | #include "aic94xx.h" |
32 | #include "aic94xx_reg.h" | 32 | #include "aic94xx_reg.h" |
33 | #include "aic94xx_sds.h" | ||
33 | 34 | ||
34 | /* ---------- OCM stuff ---------- */ | 35 | /* ---------- OCM stuff ---------- */ |
35 | 36 | ||
@@ -1083,3 +1084,391 @@ out: | |||
1083 | kfree(flash_dir); | 1084 | kfree(flash_dir); |
1084 | return err; | 1085 | return err; |
1085 | } | 1086 | } |
1087 | |||
1088 | /** | ||
1089 | * asd_verify_flash_seg - verify data with flash memory | ||
1090 | * @asd_ha: pointer to the host adapter structure | ||
1091 | * @src: pointer to the source data to be verified | ||
1092 | * @dest_offset: offset from flash memory | ||
1093 | * @bytes_to_verify: total bytes to verify | ||
1094 | */ | ||
1095 | int asd_verify_flash_seg(struct asd_ha_struct *asd_ha, | ||
1096 | void *src, u32 dest_offset, u32 bytes_to_verify) | ||
1097 | { | ||
1098 | u8 *src_buf; | ||
1099 | u8 flash_char; | ||
1100 | int err; | ||
1101 | u32 nv_offset, reg, i; | ||
1102 | |||
1103 | reg = asd_ha->hw_prof.flash.bar; | ||
1104 | src_buf = NULL; | ||
1105 | |||
1106 | err = FLASH_OK; | ||
1107 | nv_offset = dest_offset; | ||
1108 | src_buf = (u8 *)src; | ||
1109 | for (i = 0; i < bytes_to_verify; i++) { | ||
1110 | flash_char = asd_read_reg_byte(asd_ha, reg + nv_offset + i); | ||
1111 | if (flash_char != src_buf[i]) { | ||
1112 | err = FAIL_VERIFY; | ||
1113 | break; | ||
1114 | } | ||
1115 | } | ||
1116 | return err; | ||
1117 | } | ||
1118 | |||
1119 | /** | ||
1120 | * asd_write_flash_seg - write data into flash memory | ||
1121 | * @asd_ha: pointer to the host adapter structure | ||
1122 | * @src: pointer to the source data to be written | ||
1123 | * @dest_offset: offset from flash memory | ||
1124 | * @bytes_to_write: total bytes to write | ||
1125 | */ | ||
1126 | int asd_write_flash_seg(struct asd_ha_struct *asd_ha, | ||
1127 | void *src, u32 dest_offset, u32 bytes_to_write) | ||
1128 | { | ||
1129 | u8 *src_buf; | ||
1130 | u32 nv_offset, reg, i; | ||
1131 | int err; | ||
1132 | |||
1133 | reg = asd_ha->hw_prof.flash.bar; | ||
1134 | src_buf = NULL; | ||
1135 | |||
1136 | err = asd_check_flash_type(asd_ha); | ||
1137 | if (err) { | ||
1138 | ASD_DPRINTK("couldn't find the type of flash. err=%d\n", err); | ||
1139 | return err; | ||
1140 | } | ||
1141 | |||
1142 | nv_offset = dest_offset; | ||
1143 | err = asd_erase_nv_sector(asd_ha, nv_offset, bytes_to_write); | ||
1144 | if (err) { | ||
1145 | ASD_DPRINTK("Erase failed at offset:0x%x\n", | ||
1146 | nv_offset); | ||
1147 | return err; | ||
1148 | } | ||
1149 | |||
1150 | err = asd_reset_flash(asd_ha); | ||
1151 | if (err) { | ||
1152 | ASD_DPRINTK("couldn't reset flash. err=%d\n", err); | ||
1153 | return err; | ||
1154 | } | ||
1155 | |||
1156 | src_buf = (u8 *)src; | ||
1157 | for (i = 0; i < bytes_to_write; i++) { | ||
1158 | /* Setup program command sequence */ | ||
1159 | switch (asd_ha->hw_prof.flash.method) { | ||
1160 | case FLASH_METHOD_A: | ||
1161 | { | ||
1162 | asd_write_reg_byte(asd_ha, | ||
1163 | (reg + 0xAAA), 0xAA); | ||
1164 | asd_write_reg_byte(asd_ha, | ||
1165 | (reg + 0x555), 0x55); | ||
1166 | asd_write_reg_byte(asd_ha, | ||
1167 | (reg + 0xAAA), 0xA0); | ||
1168 | asd_write_reg_byte(asd_ha, | ||
1169 | (reg + nv_offset + i), | ||
1170 | (*(src_buf + i))); | ||
1171 | break; | ||
1172 | } | ||
1173 | case FLASH_METHOD_B: | ||
1174 | { | ||
1175 | asd_write_reg_byte(asd_ha, | ||
1176 | (reg + 0x555), 0xAA); | ||
1177 | asd_write_reg_byte(asd_ha, | ||
1178 | (reg + 0x2AA), 0x55); | ||
1179 | asd_write_reg_byte(asd_ha, | ||
1180 | (reg + 0x555), 0xA0); | ||
1181 | asd_write_reg_byte(asd_ha, | ||
1182 | (reg + nv_offset + i), | ||
1183 | (*(src_buf + i))); | ||
1184 | break; | ||
1185 | } | ||
1186 | default: | ||
1187 | break; | ||
1188 | } | ||
1189 | if (asd_chk_write_status(asd_ha, | ||
1190 | (nv_offset + i), 0) != 0) { | ||
1191 | ASD_DPRINTK("aicx: Write failed at offset:0x%x\n", | ||
1192 | reg + nv_offset + i); | ||
1193 | return FAIL_WRITE_FLASH; | ||
1194 | } | ||
1195 | } | ||
1196 | |||
1197 | err = asd_reset_flash(asd_ha); | ||
1198 | if (err) { | ||
1199 | ASD_DPRINTK("couldn't reset flash. err=%d\n", err); | ||
1200 | return err; | ||
1201 | } | ||
1202 | return 0; | ||
1203 | } | ||
1204 | |||
1205 | int asd_chk_write_status(struct asd_ha_struct *asd_ha, | ||
1206 | u32 sector_addr, u8 erase_flag) | ||
1207 | { | ||
1208 | u32 reg; | ||
1209 | u32 loop_cnt; | ||
1210 | u8 nv_data1, nv_data2; | ||
1211 | u8 toggle_bit1; | ||
1212 | |||
1213 | /* | ||
1214 | * Read from DQ2 requires sector address | ||
1215 | * while it's dont care for DQ6 | ||
1216 | */ | ||
1217 | reg = asd_ha->hw_prof.flash.bar; | ||
1218 | |||
1219 | for (loop_cnt = 0; loop_cnt < 50000; loop_cnt++) { | ||
1220 | nv_data1 = asd_read_reg_byte(asd_ha, reg); | ||
1221 | nv_data2 = asd_read_reg_byte(asd_ha, reg); | ||
1222 | |||
1223 | toggle_bit1 = ((nv_data1 & FLASH_STATUS_BIT_MASK_DQ6) | ||
1224 | ^ (nv_data2 & FLASH_STATUS_BIT_MASK_DQ6)); | ||
1225 | |||
1226 | if (toggle_bit1 == 0) { | ||
1227 | return 0; | ||
1228 | } else { | ||
1229 | if (nv_data2 & FLASH_STATUS_BIT_MASK_DQ5) { | ||
1230 | nv_data1 = asd_read_reg_byte(asd_ha, | ||
1231 | reg); | ||
1232 | nv_data2 = asd_read_reg_byte(asd_ha, | ||
1233 | reg); | ||
1234 | toggle_bit1 = | ||
1235 | ((nv_data1 & FLASH_STATUS_BIT_MASK_DQ6) | ||
1236 | ^ (nv_data2 & FLASH_STATUS_BIT_MASK_DQ6)); | ||
1237 | |||
1238 | if (toggle_bit1 == 0) | ||
1239 | return 0; | ||
1240 | } | ||
1241 | } | ||
1242 | |||
1243 | /* | ||
1244 | * ERASE is a sector-by-sector operation and requires | ||
1245 | * more time to finish while WRITE is byte-byte-byte | ||
1246 | * operation and takes lesser time to finish. | ||
1247 | * | ||
1248 | * For some strange reason a reduced ERASE delay gives different | ||
1249 | * behaviour across different spirit boards. Hence we set | ||
1250 | * a optimum balance of 50mus for ERASE which works well | ||
1251 | * across all boards. | ||
1252 | */ | ||
1253 | if (erase_flag) { | ||
1254 | udelay(FLASH_STATUS_ERASE_DELAY_COUNT); | ||
1255 | } else { | ||
1256 | udelay(FLASH_STATUS_WRITE_DELAY_COUNT); | ||
1257 | } | ||
1258 | } | ||
1259 | return -1; | ||
1260 | } | ||
1261 | |||
1262 | /** | ||
1263 | * asd_hwi_erase_nv_sector - Erase the flash memory sectors. | ||
1264 | * @asd_ha: pointer to the host adapter structure | ||
1265 | * @flash_addr: pointer to offset from flash memory | ||
1266 | * @size: total bytes to erase. | ||
1267 | */ | ||
1268 | int asd_erase_nv_sector(struct asd_ha_struct *asd_ha, u32 flash_addr, u32 size) | ||
1269 | { | ||
1270 | u32 reg; | ||
1271 | u32 sector_addr; | ||
1272 | |||
1273 | reg = asd_ha->hw_prof.flash.bar; | ||
1274 | |||
1275 | /* sector staring address */ | ||
1276 | sector_addr = flash_addr & FLASH_SECTOR_SIZE_MASK; | ||
1277 | |||
1278 | /* | ||
1279 | * Erasing an flash sector needs to be done in six consecutive | ||
1280 | * write cyles. | ||
1281 | */ | ||
1282 | while (sector_addr < flash_addr+size) { | ||
1283 | switch (asd_ha->hw_prof.flash.method) { | ||
1284 | case FLASH_METHOD_A: | ||
1285 | asd_write_reg_byte(asd_ha, (reg + 0xAAA), 0xAA); | ||
1286 | asd_write_reg_byte(asd_ha, (reg + 0x555), 0x55); | ||
1287 | asd_write_reg_byte(asd_ha, (reg + 0xAAA), 0x80); | ||
1288 | asd_write_reg_byte(asd_ha, (reg + 0xAAA), 0xAA); | ||
1289 | asd_write_reg_byte(asd_ha, (reg + 0x555), 0x55); | ||
1290 | asd_write_reg_byte(asd_ha, (reg + sector_addr), 0x30); | ||
1291 | break; | ||
1292 | case FLASH_METHOD_B: | ||
1293 | asd_write_reg_byte(asd_ha, (reg + 0x555), 0xAA); | ||
1294 | asd_write_reg_byte(asd_ha, (reg + 0x2AA), 0x55); | ||
1295 | asd_write_reg_byte(asd_ha, (reg + 0x555), 0x80); | ||
1296 | asd_write_reg_byte(asd_ha, (reg + 0x555), 0xAA); | ||
1297 | asd_write_reg_byte(asd_ha, (reg + 0x2AA), 0x55); | ||
1298 | asd_write_reg_byte(asd_ha, (reg + sector_addr), 0x30); | ||
1299 | break; | ||
1300 | default: | ||
1301 | break; | ||
1302 | } | ||
1303 | |||
1304 | if (asd_chk_write_status(asd_ha, sector_addr, 1) != 0) | ||
1305 | return FAIL_ERASE_FLASH; | ||
1306 | |||
1307 | sector_addr += FLASH_SECTOR_SIZE; | ||
1308 | } | ||
1309 | |||
1310 | return 0; | ||
1311 | } | ||
1312 | |||
1313 | int asd_check_flash_type(struct asd_ha_struct *asd_ha) | ||
1314 | { | ||
1315 | u8 manuf_id; | ||
1316 | u8 dev_id; | ||
1317 | u8 sec_prot; | ||
1318 | u32 inc; | ||
1319 | u32 reg; | ||
1320 | int err; | ||
1321 | |||
1322 | /* get Flash memory base address */ | ||
1323 | reg = asd_ha->hw_prof.flash.bar; | ||
1324 | |||
1325 | /* Determine flash info */ | ||
1326 | err = asd_reset_flash(asd_ha); | ||
1327 | if (err) { | ||
1328 | ASD_DPRINTK("couldn't reset flash. err=%d\n", err); | ||
1329 | return err; | ||
1330 | } | ||
1331 | |||
1332 | asd_ha->hw_prof.flash.method = FLASH_METHOD_UNKNOWN; | ||
1333 | asd_ha->hw_prof.flash.manuf = FLASH_MANUF_ID_UNKNOWN; | ||
1334 | asd_ha->hw_prof.flash.dev_id = FLASH_DEV_ID_UNKNOWN; | ||
1335 | |||
1336 | /* Get flash info. This would most likely be AMD Am29LV family flash. | ||
1337 | * First try the sequence for word mode. It is the same as for | ||
1338 | * 008B (byte mode only), 160B (word mode) and 800D (word mode). | ||
1339 | */ | ||
1340 | inc = asd_ha->hw_prof.flash.wide ? 2 : 1; | ||
1341 | asd_write_reg_byte(asd_ha, reg + 0xAAA, 0xAA); | ||
1342 | asd_write_reg_byte(asd_ha, reg + 0x555, 0x55); | ||
1343 | asd_write_reg_byte(asd_ha, reg + 0xAAA, 0x90); | ||
1344 | manuf_id = asd_read_reg_byte(asd_ha, reg); | ||
1345 | dev_id = asd_read_reg_byte(asd_ha, reg + inc); | ||
1346 | sec_prot = asd_read_reg_byte(asd_ha, reg + inc + inc); | ||
1347 | /* Get out of autoselect mode. */ | ||
1348 | err = asd_reset_flash(asd_ha); | ||
1349 | if (err) { | ||
1350 | ASD_DPRINTK("couldn't reset flash. err=%d\n", err); | ||
1351 | return err; | ||
1352 | } | ||
1353 | ASD_DPRINTK("Flash MethodA manuf_id(0x%x) dev_id(0x%x) " | ||
1354 | "sec_prot(0x%x)\n", manuf_id, dev_id, sec_prot); | ||
1355 | err = asd_reset_flash(asd_ha); | ||
1356 | if (err != 0) | ||
1357 | return err; | ||
1358 | |||
1359 | switch (manuf_id) { | ||
1360 | case FLASH_MANUF_ID_AMD: | ||
1361 | switch (sec_prot) { | ||
1362 | case FLASH_DEV_ID_AM29LV800DT: | ||
1363 | case FLASH_DEV_ID_AM29LV640MT: | ||
1364 | case FLASH_DEV_ID_AM29F800B: | ||
1365 | asd_ha->hw_prof.flash.method = FLASH_METHOD_A; | ||
1366 | break; | ||
1367 | default: | ||
1368 | break; | ||
1369 | } | ||
1370 | break; | ||
1371 | case FLASH_MANUF_ID_ST: | ||
1372 | switch (sec_prot) { | ||
1373 | case FLASH_DEV_ID_STM29W800DT: | ||
1374 | case FLASH_DEV_ID_STM29LV640: | ||
1375 | asd_ha->hw_prof.flash.method = FLASH_METHOD_A; | ||
1376 | break; | ||
1377 | default: | ||
1378 | break; | ||
1379 | } | ||
1380 | break; | ||
1381 | case FLASH_MANUF_ID_FUJITSU: | ||
1382 | switch (sec_prot) { | ||
1383 | case FLASH_DEV_ID_MBM29LV800TE: | ||
1384 | case FLASH_DEV_ID_MBM29DL800TA: | ||
1385 | asd_ha->hw_prof.flash.method = FLASH_METHOD_A; | ||
1386 | break; | ||
1387 | } | ||
1388 | break; | ||
1389 | case FLASH_MANUF_ID_MACRONIX: | ||
1390 | switch (sec_prot) { | ||
1391 | case FLASH_DEV_ID_MX29LV800BT: | ||
1392 | asd_ha->hw_prof.flash.method = FLASH_METHOD_A; | ||
1393 | break; | ||
1394 | } | ||
1395 | break; | ||
1396 | } | ||
1397 | |||
1398 | if (asd_ha->hw_prof.flash.method == FLASH_METHOD_UNKNOWN) { | ||
1399 | err = asd_reset_flash(asd_ha); | ||
1400 | if (err) { | ||
1401 | ASD_DPRINTK("couldn't reset flash. err=%d\n", err); | ||
1402 | return err; | ||
1403 | } | ||
1404 | |||
1405 | /* Issue Unlock sequence for AM29LV008BT */ | ||
1406 | asd_write_reg_byte(asd_ha, (reg + 0x555), 0xAA); | ||
1407 | asd_write_reg_byte(asd_ha, (reg + 0x2AA), 0x55); | ||
1408 | asd_write_reg_byte(asd_ha, (reg + 0x555), 0x90); | ||
1409 | manuf_id = asd_read_reg_byte(asd_ha, reg); | ||
1410 | dev_id = asd_read_reg_byte(asd_ha, reg + inc); | ||
1411 | sec_prot = asd_read_reg_byte(asd_ha, reg + inc + inc); | ||
1412 | |||
1413 | ASD_DPRINTK("Flash MethodB manuf_id(0x%x) dev_id(0x%x) sec_prot" | ||
1414 | "(0x%x)\n", manuf_id, dev_id, sec_prot); | ||
1415 | |||
1416 | err = asd_reset_flash(asd_ha); | ||
1417 | if (err != 0) { | ||
1418 | ASD_DPRINTK("couldn't reset flash. err=%d\n", err); | ||
1419 | return err; | ||
1420 | } | ||
1421 | |||
1422 | switch (manuf_id) { | ||
1423 | case FLASH_MANUF_ID_AMD: | ||
1424 | switch (dev_id) { | ||
1425 | case FLASH_DEV_ID_AM29LV008BT: | ||
1426 | asd_ha->hw_prof.flash.method = FLASH_METHOD_B; | ||
1427 | break; | ||
1428 | default: | ||
1429 | break; | ||
1430 | } | ||
1431 | break; | ||
1432 | case FLASH_MANUF_ID_ST: | ||
1433 | switch (dev_id) { | ||
1434 | case FLASH_DEV_ID_STM29008: | ||
1435 | asd_ha->hw_prof.flash.method = FLASH_METHOD_B; | ||
1436 | break; | ||
1437 | default: | ||
1438 | break; | ||
1439 | } | ||
1440 | break; | ||
1441 | case FLASH_MANUF_ID_FUJITSU: | ||
1442 | switch (dev_id) { | ||
1443 | case FLASH_DEV_ID_MBM29LV008TA: | ||
1444 | asd_ha->hw_prof.flash.method = FLASH_METHOD_B; | ||
1445 | break; | ||
1446 | } | ||
1447 | break; | ||
1448 | case FLASH_MANUF_ID_INTEL: | ||
1449 | switch (dev_id) { | ||
1450 | case FLASH_DEV_ID_I28LV00TAT: | ||
1451 | asd_ha->hw_prof.flash.method = FLASH_METHOD_B; | ||
1452 | break; | ||
1453 | } | ||
1454 | break; | ||
1455 | case FLASH_MANUF_ID_MACRONIX: | ||
1456 | switch (dev_id) { | ||
1457 | case FLASH_DEV_ID_I28LV00TAT: | ||
1458 | asd_ha->hw_prof.flash.method = FLASH_METHOD_B; | ||
1459 | break; | ||
1460 | } | ||
1461 | break; | ||
1462 | default: | ||
1463 | return FAIL_FIND_FLASH_ID; | ||
1464 | } | ||
1465 | } | ||
1466 | |||
1467 | if (asd_ha->hw_prof.flash.method == FLASH_METHOD_UNKNOWN) | ||
1468 | return FAIL_FIND_FLASH_ID; | ||
1469 | |||
1470 | asd_ha->hw_prof.flash.manuf = manuf_id; | ||
1471 | asd_ha->hw_prof.flash.dev_id = dev_id; | ||
1472 | asd_ha->hw_prof.flash.sec_prot = sec_prot; | ||
1473 | return 0; | ||
1474 | } | ||
diff --git a/drivers/scsi/aic94xx/aic94xx_sds.h b/drivers/scsi/aic94xx/aic94xx_sds.h new file mode 100644 index 000000000000..bb9795a04dc3 --- /dev/null +++ b/drivers/scsi/aic94xx/aic94xx_sds.h | |||
@@ -0,0 +1,121 @@ | |||
1 | /* | ||
2 | * Aic94xx SAS/SATA driver hardware interface header file. | ||
3 | * | ||
4 | * Copyright (C) 2005 Adaptec, Inc. All rights reserved. | ||
5 | * Copyright (C) 2005 Gilbert Wu <gilbert_wu@adaptec.com> | ||
6 | * | ||
7 | * This file is licensed under GPLv2. | ||
8 | * | ||
9 | * This file is part of the aic94xx driver. | ||
10 | * | ||
11 | * The aic94xx driver is free software; you can redistribute it and/or | ||
12 | * modify it under the terms of the GNU General Public License as | ||
13 | * published by the Free Software Foundation; version 2 of the | ||
14 | * License. | ||
15 | * | ||
16 | * The aic94xx driver is distributed in the hope that it will be useful, | ||
17 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | ||
18 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU | ||
19 | * General Public License for more details. | ||
20 | * | ||
21 | * You should have received a copy of the GNU General Public License | ||
22 | * along with the aic94xx driver; if not, write to the Free Software | ||
23 | * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA | ||
24 | * | ||
25 | */ | ||
26 | #ifndef _AIC94XX_SDS_H_ | ||
27 | #define _AIC94XX_SDS_H_ | ||
28 | |||
29 | enum { | ||
30 | FLASH_METHOD_UNKNOWN, | ||
31 | FLASH_METHOD_A, | ||
32 | FLASH_METHOD_B | ||
33 | }; | ||
34 | |||
35 | #define FLASH_MANUF_ID_AMD 0x01 | ||
36 | #define FLASH_MANUF_ID_ST 0x20 | ||
37 | #define FLASH_MANUF_ID_FUJITSU 0x04 | ||
38 | #define FLASH_MANUF_ID_MACRONIX 0xC2 | ||
39 | #define FLASH_MANUF_ID_INTEL 0x89 | ||
40 | #define FLASH_MANUF_ID_UNKNOWN 0xFF | ||
41 | |||
42 | #define FLASH_DEV_ID_AM29LV008BT 0x3E | ||
43 | #define FLASH_DEV_ID_AM29LV800DT 0xDA | ||
44 | #define FLASH_DEV_ID_STM29W800DT 0xD7 | ||
45 | #define FLASH_DEV_ID_STM29LV640 0xDE | ||
46 | #define FLASH_DEV_ID_STM29008 0xEA | ||
47 | #define FLASH_DEV_ID_MBM29LV800TE 0xDA | ||
48 | #define FLASH_DEV_ID_MBM29DL800TA 0x4A | ||
49 | #define FLASH_DEV_ID_MBM29LV008TA 0x3E | ||
50 | #define FLASH_DEV_ID_AM29LV640MT 0x7E | ||
51 | #define FLASH_DEV_ID_AM29F800B 0xD6 | ||
52 | #define FLASH_DEV_ID_MX29LV800BT 0xDA | ||
53 | #define FLASH_DEV_ID_MX29LV008CT 0xDA | ||
54 | #define FLASH_DEV_ID_I28LV00TAT 0x3E | ||
55 | #define FLASH_DEV_ID_UNKNOWN 0xFF | ||
56 | |||
57 | /* status bit mask values */ | ||
58 | #define FLASH_STATUS_BIT_MASK_DQ6 0x40 | ||
59 | #define FLASH_STATUS_BIT_MASK_DQ5 0x20 | ||
60 | #define FLASH_STATUS_BIT_MASK_DQ2 0x04 | ||
61 | |||
62 | /* minimum value in micro seconds needed for checking status */ | ||
63 | #define FLASH_STATUS_ERASE_DELAY_COUNT 50 | ||
64 | #define FLASH_STATUS_WRITE_DELAY_COUNT 25 | ||
65 | |||
66 | #define FLASH_SECTOR_SIZE 0x010000 | ||
67 | #define FLASH_SECTOR_SIZE_MASK 0xffff0000 | ||
68 | |||
69 | #define FLASH_OK 0x000000 | ||
70 | #define FAIL_OPEN_BIOS_FILE 0x000100 | ||
71 | #define FAIL_CHECK_PCI_ID 0x000200 | ||
72 | #define FAIL_CHECK_SUM 0x000300 | ||
73 | #define FAIL_UNKNOWN 0x000400 | ||
74 | #define FAIL_VERIFY 0x000500 | ||
75 | #define FAIL_RESET_FLASH 0x000600 | ||
76 | #define FAIL_FIND_FLASH_ID 0x000700 | ||
77 | #define FAIL_ERASE_FLASH 0x000800 | ||
78 | #define FAIL_WRITE_FLASH 0x000900 | ||
79 | #define FAIL_FILE_SIZE 0x000a00 | ||
80 | #define FAIL_PARAMETERS 0x000b00 | ||
81 | #define FAIL_OUT_MEMORY 0x000c00 | ||
82 | #define FLASH_IN_PROGRESS 0x001000 | ||
83 | |||
84 | struct controller_id { | ||
85 | u32 vendor; /* PCI Vendor ID */ | ||
86 | u32 device; /* PCI Device ID */ | ||
87 | u32 sub_vendor; /* PCI Subvendor ID */ | ||
88 | u32 sub_device; /* PCI Subdevice ID */ | ||
89 | }; | ||
90 | |||
91 | struct image_info { | ||
92 | u32 ImageId; /* Identifies the image */ | ||
93 | u32 ImageOffset; /* Offset the beginning of the file */ | ||
94 | u32 ImageLength; /* length of the image */ | ||
95 | u32 ImageChecksum; /* Image checksum */ | ||
96 | u32 ImageVersion; /* Version of the image, could be build number */ | ||
97 | }; | ||
98 | |||
99 | struct bios_file_header { | ||
100 | u8 signature[32]; /* Signature/Cookie to identify the file */ | ||
101 | u32 checksum; /*Entire file checksum with this field zero */ | ||
102 | u32 antidote; /* Entire file checksum with this field 0xFFFFFFFF */ | ||
103 | struct controller_id contrl_id; /*PCI id to identify the controller */ | ||
104 | u32 filelen; /*Length of the entire file*/ | ||
105 | u32 chunk_num; /*The chunk/part number for multiple Image files */ | ||
106 | u32 total_chunks; /*Total number of chunks/parts in the image file */ | ||
107 | u32 num_images; /* Number of images in the file */ | ||
108 | u32 build_num; /* Build number of this image */ | ||
109 | struct image_info image_header; | ||
110 | }; | ||
111 | |||
112 | int asd_verify_flash_seg(struct asd_ha_struct *asd_ha, | ||
113 | void *src, u32 dest_offset, u32 bytes_to_verify); | ||
114 | int asd_write_flash_seg(struct asd_ha_struct *asd_ha, | ||
115 | void *src, u32 dest_offset, u32 bytes_to_write); | ||
116 | int asd_chk_write_status(struct asd_ha_struct *asd_ha, | ||
117 | u32 sector_addr, u8 erase_flag); | ||
118 | int asd_check_flash_type(struct asd_ha_struct *asd_ha); | ||
119 | int asd_erase_nv_sector(struct asd_ha_struct *asd_ha, | ||
120 | u32 flash_addr, u32 size); | ||
121 | #endif | ||