diff options
Diffstat (limited to 'drivers/sbus/char/aurora.c')
-rw-r--r-- | drivers/sbus/char/aurora.c | 2364 |
1 files changed, 0 insertions, 2364 deletions
diff --git a/drivers/sbus/char/aurora.c b/drivers/sbus/char/aurora.c deleted file mode 100644 index a54b4ac67568..000000000000 --- a/drivers/sbus/char/aurora.c +++ /dev/null | |||
@@ -1,2364 +0,0 @@ | |||
1 | /* $Id: aurora.c,v 1.19 2002/01/08 16:00:16 davem Exp $ | ||
2 | * linux/drivers/sbus/char/aurora.c -- Aurora multiport driver | ||
3 | * | ||
4 | * Copyright (c) 1999 by Oliver Aldulea (oli at bv dot ro) | ||
5 | * | ||
6 | * This code is based on the RISCom/8 multiport serial driver written | ||
7 | * by Dmitry Gorodchanin (pgmdsg@ibi.com), based on the Linux serial | ||
8 | * driver, written by Linus Torvalds, Theodore T'so and others. | ||
9 | * The Aurora multiport programming info was obtained mainly from the | ||
10 | * Cirrus Logic CD180 documentation (available on the web), and by | ||
11 | * doing heavy tests on the board. Many thanks to Eddie C. Dost for the | ||
12 | * help on the sbus interface. | ||
13 | * | ||
14 | * This program is free software; you can redistribute it and/or modify | ||
15 | * it under the terms of the GNU General Public License as published by | ||
16 | * the Free Software Foundation; either version 2 of the License, or | ||
17 | * (at your option) any later version. | ||
18 | * | ||
19 | * This program is distributed in the hope that it will be useful, | ||
20 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | ||
21 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | ||
22 | * GNU General Public License for more details. | ||
23 | * | ||
24 | * You should have received a copy of the GNU General Public License | ||
25 | * along with this program; if not, write to the Free Software | ||
26 | * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | ||
27 | * | ||
28 | * Revision 1.0 | ||
29 | * | ||
30 | * This is the first public release. | ||
31 | * | ||
32 | * Most of the information you need is in the aurora.h file. Please | ||
33 | * read that file before reading this one. | ||
34 | * | ||
35 | * Several parts of the code do not have comments yet. | ||
36 | * | ||
37 | * n.b. The board can support 115.2 bit rates, but only on a few | ||
38 | * ports. The total badwidth of one chip (ports 0-7 or 8-15) is equal | ||
39 | * to OSC_FREQ div 16. In case of my board, each chip can take 6 | ||
40 | * channels of 115.2 kbaud. This information is not well-tested. | ||
41 | * | ||
42 | * Fixed to use tty_get_baud_rate(). | ||
43 | * Theodore Ts'o <tytso@mit.edu>, 2001-Oct-12 | ||
44 | */ | ||
45 | |||
46 | #include <linux/module.h> | ||
47 | |||
48 | #include <linux/errno.h> | ||
49 | #include <linux/sched.h> | ||
50 | #ifdef AURORA_INT_DEBUG | ||
51 | #include <linux/timer.h> | ||
52 | #endif | ||
53 | #include <linux/interrupt.h> | ||
54 | #include <linux/tty.h> | ||
55 | #include <linux/tty_flip.h> | ||
56 | #include <linux/major.h> | ||
57 | #include <linux/string.h> | ||
58 | #include <linux/fcntl.h> | ||
59 | #include <linux/mm.h> | ||
60 | #include <linux/kernel.h> | ||
61 | #include <linux/init.h> | ||
62 | #include <linux/delay.h> | ||
63 | #include <linux/bitops.h> | ||
64 | |||
65 | #include <asm/io.h> | ||
66 | #include <asm/irq.h> | ||
67 | #include <asm/oplib.h> | ||
68 | #include <asm/system.h> | ||
69 | #include <asm/kdebug.h> | ||
70 | #include <asm/sbus.h> | ||
71 | #include <asm/uaccess.h> | ||
72 | |||
73 | #include "aurora.h" | ||
74 | #include "cd180.h" | ||
75 | |||
76 | unsigned char irqs[4] = { | ||
77 | 0, 0, 0, 0 | ||
78 | }; | ||
79 | |||
80 | #ifdef AURORA_INT_DEBUG | ||
81 | int irqhit=0; | ||
82 | #endif | ||
83 | |||
84 | static struct tty_driver *aurora_driver; | ||
85 | static struct Aurora_board aurora_board[AURORA_NBOARD] = { | ||
86 | {0,}, | ||
87 | }; | ||
88 | |||
89 | static struct Aurora_port aurora_port[AURORA_TNPORTS] = { | ||
90 | { 0, }, | ||
91 | }; | ||
92 | |||
93 | /* no longer used. static struct Aurora_board * IRQ_to_board[16] = { NULL, } ;*/ | ||
94 | static unsigned char * tmp_buf = NULL; | ||
95 | |||
96 | DECLARE_TASK_QUEUE(tq_aurora); | ||
97 | |||
98 | static inline int aurora_paranoia_check(struct Aurora_port const * port, | ||
99 | char *name, const char *routine) | ||
100 | { | ||
101 | #ifdef AURORA_PARANOIA_CHECK | ||
102 | static const char *badmagic = | ||
103 | KERN_DEBUG "aurora: Warning: bad aurora port magic number for device %s in %s\n"; | ||
104 | static const char *badinfo = | ||
105 | KERN_DEBUG "aurora: Warning: null aurora port for device %s in %s\n"; | ||
106 | |||
107 | if (!port) { | ||
108 | printk(badinfo, name, routine); | ||
109 | return 1; | ||
110 | } | ||
111 | if (port->magic != AURORA_MAGIC) { | ||
112 | printk(badmagic, name, routine); | ||
113 | return 1; | ||
114 | } | ||
115 | #endif | ||
116 | return 0; | ||
117 | } | ||
118 | |||
119 | /* | ||
120 | * | ||
121 | * Service functions for aurora driver. | ||
122 | * | ||
123 | */ | ||
124 | |||
125 | /* Get board number from pointer */ | ||
126 | static inline int board_No (struct Aurora_board const * bp) | ||
127 | { | ||
128 | return bp - aurora_board; | ||
129 | } | ||
130 | |||
131 | /* Get port number from pointer */ | ||
132 | static inline int port_No (struct Aurora_port const * port) | ||
133 | { | ||
134 | return AURORA_PORT(port - aurora_port); | ||
135 | } | ||
136 | |||
137 | /* Get pointer to board from pointer to port */ | ||
138 | static inline struct Aurora_board * port_Board(struct Aurora_port const * port) | ||
139 | { | ||
140 | return &aurora_board[AURORA_BOARD(port - aurora_port)]; | ||
141 | } | ||
142 | |||
143 | /* Wait for Channel Command Register ready */ | ||
144 | static inline void aurora_wait_CCR(struct aurora_reg128 * r) | ||
145 | { | ||
146 | unsigned long delay; | ||
147 | |||
148 | #ifdef AURORA_DEBUG | ||
149 | printk("aurora_wait_CCR\n"); | ||
150 | #endif | ||
151 | /* FIXME: need something more descriptive than 100000 :) */ | ||
152 | for (delay = 100000; delay; delay--) | ||
153 | if (!sbus_readb(&r->r[CD180_CCR])) | ||
154 | return; | ||
155 | printk(KERN_DEBUG "aurora: Timeout waiting for CCR.\n"); | ||
156 | } | ||
157 | |||
158 | /* | ||
159 | * aurora probe functions. | ||
160 | */ | ||
161 | |||
162 | /* Must be called with enabled interrupts */ | ||
163 | static inline void aurora_long_delay(unsigned long delay) | ||
164 | { | ||
165 | unsigned long i; | ||
166 | |||
167 | #ifdef AURORA_DEBUG | ||
168 | printk("aurora_long_delay: start\n"); | ||
169 | #endif | ||
170 | for (i = jiffies + delay; time_before(jiffies, i); ) ; | ||
171 | #ifdef AURORA_DEBUG | ||
172 | printk("aurora_long_delay: end\n"); | ||
173 | #endif | ||
174 | } | ||
175 | |||
176 | /* Reset and setup CD180 chip */ | ||
177 | static int aurora_init_CD180(struct Aurora_board * bp, int chip) | ||
178 | { | ||
179 | unsigned long flags; | ||
180 | int id; | ||
181 | |||
182 | #ifdef AURORA_DEBUG | ||
183 | printk("aurora_init_CD180: start %d:%d\n", | ||
184 | board_No(bp), chip); | ||
185 | #endif | ||
186 | save_flags(flags); cli(); | ||
187 | sbus_writeb(0, &bp->r[chip]->r[CD180_CAR]); | ||
188 | sbus_writeb(0, &bp->r[chip]->r[CD180_GSVR]); | ||
189 | |||
190 | /* Wait for CCR ready */ | ||
191 | aurora_wait_CCR(bp->r[chip]); | ||
192 | |||
193 | /* Reset CD180 chip */ | ||
194 | sbus_writeb(CCR_HARDRESET, &bp->r[chip]->r[CD180_CCR]); | ||
195 | udelay(1); | ||
196 | sti(); | ||
197 | id=1000; | ||
198 | while((--id) && | ||
199 | (sbus_readb(&bp->r[chip]->r[CD180_GSVR])!=0xff))udelay(100); | ||
200 | if(!id) { | ||
201 | printk(KERN_ERR "aurora%d: Chip %d failed init.\n", | ||
202 | board_No(bp), chip); | ||
203 | restore_flags(flags); | ||
204 | return(-1); | ||
205 | } | ||
206 | cli(); | ||
207 | sbus_writeb((board_No(bp)<<5)|((chip+1)<<3), | ||
208 | &bp->r[chip]->r[CD180_GSVR]); /* Set ID for this chip */ | ||
209 | sbus_writeb(0x80|bp->ACK_MINT, | ||
210 | &bp->r[chip]->r[CD180_MSMR]); /* Prio for modem intr */ | ||
211 | sbus_writeb(0x80|bp->ACK_TINT, | ||
212 | &bp->r[chip]->r[CD180_TSMR]); /* Prio for transmitter intr */ | ||
213 | sbus_writeb(0x80|bp->ACK_RINT, | ||
214 | &bp->r[chip]->r[CD180_RSMR]); /* Prio for receiver intr */ | ||
215 | /* Setting up prescaler. We need 4 tick per 1 ms */ | ||
216 | sbus_writeb((bp->oscfreq/(1000000/AURORA_TPS)) >> 8, | ||
217 | &bp->r[chip]->r[CD180_PPRH]); | ||
218 | sbus_writeb((bp->oscfreq/(1000000/AURORA_TPS)) & 0xff, | ||
219 | &bp->r[chip]->r[CD180_PPRL]); | ||
220 | |||
221 | sbus_writeb(SRCR_AUTOPRI|SRCR_GLOBPRI, | ||
222 | &bp->r[chip]->r[CD180_SRCR]); | ||
223 | |||
224 | id = sbus_readb(&bp->r[chip]->r[CD180_GFRCR]); | ||
225 | printk(KERN_INFO "aurora%d: Chip %d id %02x: ", | ||
226 | board_No(bp), chip,id); | ||
227 | if(sbus_readb(&bp->r[chip]->r[CD180_SRCR]) & 128) { | ||
228 | switch (id) { | ||
229 | case 0x82:printk("CL-CD1864 rev A\n");break; | ||
230 | case 0x83:printk("CL-CD1865 rev A\n");break; | ||
231 | case 0x84:printk("CL-CD1865 rev B\n");break; | ||
232 | case 0x85:printk("CL-CD1865 rev C\n");break; | ||
233 | default:printk("Unknown.\n"); | ||
234 | }; | ||
235 | } else { | ||
236 | switch (id) { | ||
237 | case 0x81:printk("CL-CD180 rev B\n");break; | ||
238 | case 0x82:printk("CL-CD180 rev C\n");break; | ||
239 | default:printk("Unknown.\n"); | ||
240 | }; | ||
241 | } | ||
242 | restore_flags(flags); | ||
243 | #ifdef AURORA_DEBUG | ||
244 | printk("aurora_init_CD180: end\n"); | ||
245 | #endif | ||
246 | return 0; | ||
247 | } | ||
248 | |||
249 | static int valid_irq(unsigned char irq) | ||
250 | { | ||
251 | int i; | ||
252 | for(i=0;i<TYPE_1_IRQS;i++) | ||
253 | if (type_1_irq[i]==irq) return 1; | ||
254 | return 0; | ||
255 | } | ||
256 | |||
257 | static irqreturn_t aurora_interrupt(int irq, void * dev_id); | ||
258 | |||
259 | /* Main probing routine, also sets irq. */ | ||
260 | static int aurora_probe(void) | ||
261 | { | ||
262 | struct sbus_bus *sbus; | ||
263 | struct sbus_dev *sdev; | ||
264 | int grrr; | ||
265 | char buf[30]; | ||
266 | int bn = 0; | ||
267 | struct Aurora_board *bp; | ||
268 | |||
269 | for_each_sbus(sbus) { | ||
270 | for_each_sbusdev(sdev, sbus) { | ||
271 | /* printk("Try: %x %s\n",sdev,sdev->prom_name);*/ | ||
272 | if (!strcmp(sdev->prom_name, "sio16")) { | ||
273 | #ifdef AURORA_DEBUG | ||
274 | printk(KERN_INFO "aurora: sio16 at %p\n",sdev); | ||
275 | #endif | ||
276 | if((sdev->reg_addrs[0].reg_size!=1) && | ||
277 | (sdev->reg_addrs[1].reg_size!=128) && | ||
278 | (sdev->reg_addrs[2].reg_size!=128) && | ||
279 | (sdev->reg_addrs[3].reg_size!=4)) { | ||
280 | printk(KERN_ERR "aurora%d: registers' sizes " | ||
281 | "do not match.\n", bn); | ||
282 | break; | ||
283 | } | ||
284 | bp = &aurora_board[bn]; | ||
285 | bp->r0 = (struct aurora_reg1 *) | ||
286 | sbus_ioremap(&sdev->resource[0], 0, | ||
287 | sdev->reg_addrs[0].reg_size, | ||
288 | "sio16"); | ||
289 | if (bp->r0 == NULL) { | ||
290 | printk(KERN_ERR "aurora%d: can't map " | ||
291 | "reg_addrs[0]\n", bn); | ||
292 | break; | ||
293 | } | ||
294 | #ifdef AURORA_DEBUG | ||
295 | printk("Map reg 0: %p\n", bp->r0); | ||
296 | #endif | ||
297 | bp->r[0] = (struct aurora_reg128 *) | ||
298 | sbus_ioremap(&sdev->resource[1], 0, | ||
299 | sdev->reg_addrs[1].reg_size, | ||
300 | "sio16"); | ||
301 | if (bp->r[0] == NULL) { | ||
302 | printk(KERN_ERR "aurora%d: can't map " | ||
303 | "reg_addrs[1]\n", bn); | ||
304 | break; | ||
305 | } | ||
306 | #ifdef AURORA_DEBUG | ||
307 | printk("Map reg 1: %p\n", bp->r[0]); | ||
308 | #endif | ||
309 | bp->r[1] = (struct aurora_reg128 *) | ||
310 | sbus_ioremap(&sdev->resource[2], 0, | ||
311 | sdev->reg_addrs[2].reg_size, | ||
312 | "sio16"); | ||
313 | if (bp->r[1] == NULL) { | ||
314 | printk(KERN_ERR "aurora%d: can't map " | ||
315 | "reg_addrs[2]\n", bn); | ||
316 | break; | ||
317 | } | ||
318 | #ifdef AURORA_DEBUG | ||
319 | printk("Map reg 2: %p\n", bp->r[1]); | ||
320 | #endif | ||
321 | bp->r3 = (struct aurora_reg4 *) | ||
322 | sbus_ioremap(&sdev->resource[3], 0, | ||
323 | sdev->reg_addrs[3].reg_size, | ||
324 | "sio16"); | ||
325 | if (bp->r3 == NULL) { | ||
326 | printk(KERN_ERR "aurora%d: can't map " | ||
327 | "reg_addrs[3]\n", bn); | ||
328 | break; | ||
329 | } | ||
330 | #ifdef AURORA_DEBUG | ||
331 | printk("Map reg 3: %p\n", bp->r3); | ||
332 | #endif | ||
333 | /* Variables setup */ | ||
334 | bp->flags = 0; | ||
335 | #ifdef AURORA_DEBUG | ||
336 | grrr=prom_getint(sdev->prom_node,"intr"); | ||
337 | printk("intr pri %d\n", grrr); | ||
338 | #endif | ||
339 | if ((bp->irq=irqs[bn]) && valid_irq(bp->irq) && | ||
340 | !request_irq(bp->irq|0x30, aurora_interrupt, IRQF_SHARED, "sio16", bp)) { | ||
341 | free_irq(bp->irq|0x30, bp); | ||
342 | } else | ||
343 | if ((bp->irq=prom_getint(sdev->prom_node, "bintr")) && valid_irq(bp->irq) && | ||
344 | !request_irq(bp->irq|0x30, aurora_interrupt, IRQF_SHARED, "sio16", bp)) { | ||
345 | free_irq(bp->irq|0x30, bp); | ||
346 | } else | ||
347 | if ((bp->irq=prom_getint(sdev->prom_node, "intr")) && valid_irq(bp->irq) && | ||
348 | !request_irq(bp->irq|0x30, aurora_interrupt, IRQF_SHARED, "sio16", bp)) { | ||
349 | free_irq(bp->irq|0x30, bp); | ||
350 | } else | ||
351 | for(grrr=0;grrr<TYPE_1_IRQS;grrr++) { | ||
352 | if ((bp->irq=type_1_irq[grrr])&&!request_irq(bp->irq|0x30, aurora_interrupt, IRQF_SHARED, "sio16", bp)) { | ||
353 | free_irq(bp->irq|0x30, bp); | ||
354 | break; | ||
355 | } else { | ||
356 | printk(KERN_ERR "aurora%d: Could not get an irq for this board !!!\n",bn); | ||
357 | bp->flags=0xff; | ||
358 | } | ||
359 | } | ||
360 | if(bp->flags==0xff)break; | ||
361 | printk(KERN_INFO "aurora%d: irq %d\n",bn,bp->irq&0x0f); | ||
362 | buf[0]=0; | ||
363 | grrr=prom_getproperty(sdev->prom_node,"dtr_rts",buf,sizeof(buf)); | ||
364 | if(!strcmp(buf,"swapped")){ | ||
365 | printk(KERN_INFO "aurora%d: Swapped DTR and RTS\n",bn); | ||
366 | bp->DTR=MSVR_RTS; | ||
367 | bp->RTS=MSVR_DTR; | ||
368 | bp->MSVDTR=CD180_MSVRTS; | ||
369 | bp->MSVRTS=CD180_MSVDTR; | ||
370 | bp->flags|=AURORA_BOARD_DTR_FLOW_OK; | ||
371 | }else{ | ||
372 | #ifdef AURORA_FORCE_DTR_FLOW | ||
373 | printk(KERN_INFO "aurora%d: Forcing swapped DTR-RTS\n",bn); | ||
374 | bp->DTR=MSVR_RTS; | ||
375 | bp->RTS=MSVR_DTR; | ||
376 | bp->MSVDTR=CD180_MSVRTS; | ||
377 | bp->MSVRTS=CD180_MSVDTR; | ||
378 | bp->flags|=AURORA_BOARD_DTR_FLOW_OK; | ||
379 | #else | ||
380 | printk(KERN_INFO "aurora%d: Normal DTR and RTS\n",bn); | ||
381 | bp->DTR=MSVR_DTR; | ||
382 | bp->RTS=MSVR_RTS; | ||
383 | bp->MSVDTR=CD180_MSVDTR; | ||
384 | bp->MSVRTS=CD180_MSVRTS; | ||
385 | #endif | ||
386 | } | ||
387 | bp->oscfreq=prom_getint(sdev->prom_node,"clk")*100; | ||
388 | printk(KERN_INFO "aurora%d: Oscillator: %d Hz\n",bn,bp->oscfreq); | ||
389 | grrr=prom_getproperty(sdev->prom_node,"chip",buf,sizeof(buf)); | ||
390 | printk(KERN_INFO "aurora%d: Chips: %s\n",bn,buf); | ||
391 | grrr=prom_getproperty(sdev->prom_node,"manu",buf,sizeof(buf)); | ||
392 | printk(KERN_INFO "aurora%d: Manufacturer: %s\n",bn,buf); | ||
393 | grrr=prom_getproperty(sdev->prom_node,"model",buf,sizeof(buf)); | ||
394 | printk(KERN_INFO "aurora%d: Model: %s\n",bn,buf); | ||
395 | grrr=prom_getproperty(sdev->prom_node,"rev",buf,sizeof(buf)); | ||
396 | printk(KERN_INFO "aurora%d: Revision: %s\n",bn,buf); | ||
397 | grrr=prom_getproperty(sdev->prom_node,"mode",buf,sizeof(buf)); | ||
398 | printk(KERN_INFO "aurora%d: Mode: %s\n",bn,buf); | ||
399 | #ifdef MODULE | ||
400 | bp->count=0; | ||
401 | #endif | ||
402 | bp->flags = AURORA_BOARD_PRESENT; | ||
403 | /* hardware ack */ | ||
404 | bp->ACK_MINT=1; | ||
405 | bp->ACK_TINT=2; | ||
406 | bp->ACK_RINT=3; | ||
407 | bn++; | ||
408 | } | ||
409 | } | ||
410 | } | ||
411 | return bn; | ||
412 | } | ||
413 | |||
414 | static void aurora_release_io_range(struct Aurora_board *bp) | ||
415 | { | ||
416 | sbus_iounmap((unsigned long)bp->r0, 1); | ||
417 | sbus_iounmap((unsigned long)bp->r[0], 128); | ||
418 | sbus_iounmap((unsigned long)bp->r[1], 128); | ||
419 | sbus_iounmap((unsigned long)bp->r3, 4); | ||
420 | } | ||
421 | |||
422 | static inline void aurora_mark_event(struct Aurora_port * port, int event) | ||
423 | { | ||
424 | #ifdef AURORA_DEBUG | ||
425 | printk("aurora_mark_event: start\n"); | ||
426 | #endif | ||
427 | set_bit(event, &port->event); | ||
428 | queue_task(&port->tqueue, &tq_aurora); | ||
429 | mark_bh(AURORA_BH); | ||
430 | #ifdef AURORA_DEBUG | ||
431 | printk("aurora_mark_event: end\n"); | ||
432 | #endif | ||
433 | } | ||
434 | |||
435 | static __inline__ struct Aurora_port * aurora_get_port(struct Aurora_board const * bp, | ||
436 | int chip, | ||
437 | unsigned char const *what) | ||
438 | { | ||
439 | unsigned char channel; | ||
440 | struct Aurora_port * port; | ||
441 | |||
442 | channel = ((chip << 3) | | ||
443 | ((sbus_readb(&bp->r[chip]->r[CD180_GSCR]) & GSCR_CHAN) >> GSCR_CHAN_OFF)); | ||
444 | port = &aurora_port[board_No(bp) * AURORA_NPORT * AURORA_NCD180 + channel]; | ||
445 | if (port->flags & ASYNC_INITIALIZED) | ||
446 | return port; | ||
447 | |||
448 | printk(KERN_DEBUG "aurora%d: %s interrupt from invalid port %d\n", | ||
449 | board_No(bp), what, channel); | ||
450 | return NULL; | ||
451 | } | ||
452 | |||
453 | static void aurora_receive_exc(struct Aurora_board const * bp, int chip) | ||
454 | { | ||
455 | struct Aurora_port *port; | ||
456 | struct tty_struct *tty; | ||
457 | unsigned char status; | ||
458 | unsigned char ch; | ||
459 | |||
460 | if (!(port = aurora_get_port(bp, chip, "Receive_x"))) | ||
461 | return; | ||
462 | |||
463 | tty = port->tty; | ||
464 | if (tty->flip.count >= TTY_FLIPBUF_SIZE) { | ||
465 | #ifdef AURORA_INTNORM | ||
466 | printk("aurora%d: port %d: Working around flip buffer overflow.\n", | ||
467 | board_No(bp), port_No(port)); | ||
468 | #endif | ||
469 | return; | ||
470 | } | ||
471 | |||
472 | #ifdef AURORA_REPORT_OVERRUN | ||
473 | status = sbus_readb(&bp->r[chip]->r[CD180_RCSR]); | ||
474 | if (status & RCSR_OE) { | ||
475 | port->overrun++; | ||
476 | #if 1 | ||
477 | printk("aurora%d: port %d: Overrun. Total %ld overruns.\n", | ||
478 | board_No(bp), port_No(port), port->overrun); | ||
479 | #endif | ||
480 | } | ||
481 | status &= port->mark_mask; | ||
482 | #else | ||
483 | status = sbus_readb(&bp->r[chip]->r[CD180_RCSR]) & port->mark_mask; | ||
484 | #endif | ||
485 | ch = sbus_readb(&bp->r[chip]->r[CD180_RDR]); | ||
486 | if (!status) | ||
487 | return; | ||
488 | |||
489 | if (status & RCSR_TOUT) { | ||
490 | /* printk("aurora%d: port %d: Receiver timeout. Hardware problems ?\n", | ||
491 | board_No(bp), port_No(port));*/ | ||
492 | return; | ||
493 | |||
494 | } else if (status & RCSR_BREAK) { | ||
495 | printk(KERN_DEBUG "aurora%d: port %d: Handling break...\n", | ||
496 | board_No(bp), port_No(port)); | ||
497 | *tty->flip.flag_buf_ptr++ = TTY_BREAK; | ||
498 | if (port->flags & ASYNC_SAK) | ||
499 | do_SAK(tty); | ||
500 | |||
501 | } else if (status & RCSR_PE) | ||
502 | *tty->flip.flag_buf_ptr++ = TTY_PARITY; | ||
503 | |||
504 | else if (status & RCSR_FE) | ||
505 | *tty->flip.flag_buf_ptr++ = TTY_FRAME; | ||
506 | |||
507 | else if (status & RCSR_OE) | ||
508 | *tty->flip.flag_buf_ptr++ = TTY_OVERRUN; | ||
509 | |||
510 | else | ||
511 | *tty->flip.flag_buf_ptr++ = 0; | ||
512 | |||
513 | *tty->flip.char_buf_ptr++ = ch; | ||
514 | tty->flip.count++; | ||
515 | queue_task(&tty->flip.tqueue, &tq_timer); | ||
516 | } | ||
517 | |||
518 | static void aurora_receive(struct Aurora_board const * bp, int chip) | ||
519 | { | ||
520 | struct Aurora_port *port; | ||
521 | struct tty_struct *tty; | ||
522 | unsigned char count,cnt; | ||
523 | |||
524 | if (!(port = aurora_get_port(bp, chip, "Receive"))) | ||
525 | return; | ||
526 | |||
527 | tty = port->tty; | ||
528 | |||
529 | count = sbus_readb(&bp->r[chip]->r[CD180_RDCR]); | ||
530 | |||
531 | #ifdef AURORA_REPORT_FIFO | ||
532 | port->hits[count > 8 ? 9 : count]++; | ||
533 | #endif | ||
534 | |||
535 | while (count--) { | ||
536 | if (tty->flip.count >= TTY_FLIPBUF_SIZE) { | ||
537 | #ifdef AURORA_INTNORM | ||
538 | printk("aurora%d: port %d: Working around flip buffer overflow.\n", | ||
539 | board_No(bp), port_No(port)); | ||
540 | #endif | ||
541 | break; | ||
542 | } | ||
543 | cnt = sbus_readb(&bp->r[chip]->r[CD180_RDR]); | ||
544 | *tty->flip.char_buf_ptr++ = cnt; | ||
545 | *tty->flip.flag_buf_ptr++ = 0; | ||
546 | tty->flip.count++; | ||
547 | } | ||
548 | queue_task(&tty->flip.tqueue, &tq_timer); | ||
549 | } | ||
550 | |||
551 | static void aurora_transmit(struct Aurora_board const * bp, int chip) | ||
552 | { | ||
553 | struct Aurora_port *port; | ||
554 | struct tty_struct *tty; | ||
555 | unsigned char count; | ||
556 | |||
557 | if (!(port = aurora_get_port(bp, chip, "Transmit"))) | ||
558 | return; | ||
559 | |||
560 | tty = port->tty; | ||
561 | |||
562 | if (port->SRER & SRER_TXEMPTY) { | ||
563 | /* FIFO drained */ | ||
564 | sbus_writeb(port_No(port) & 7, | ||
565 | &bp->r[chip]->r[CD180_CAR]); | ||
566 | udelay(1); | ||
567 | port->SRER &= ~SRER_TXEMPTY; | ||
568 | sbus_writeb(port->SRER, &bp->r[chip]->r[CD180_SRER]); | ||
569 | return; | ||
570 | } | ||
571 | |||
572 | if ((port->xmit_cnt <= 0 && !port->break_length) | ||
573 | || tty->stopped || tty->hw_stopped) { | ||
574 | sbus_writeb(port_No(port) & 7, | ||
575 | &bp->r[chip]->r[CD180_CAR]); | ||
576 | udelay(1); | ||
577 | port->SRER &= ~SRER_TXRDY; | ||
578 | sbus_writeb(port->SRER, | ||
579 | &bp->r[chip]->r[CD180_SRER]); | ||
580 | return; | ||
581 | } | ||
582 | |||
583 | if (port->break_length) { | ||
584 | if (port->break_length > 0) { | ||
585 | if (port->COR2 & COR2_ETC) { | ||
586 | sbus_writeb(CD180_C_ESC, | ||
587 | &bp->r[chip]->r[CD180_TDR]); | ||
588 | sbus_writeb(CD180_C_SBRK, | ||
589 | &bp->r[chip]->r[CD180_TDR]); | ||
590 | port->COR2 &= ~COR2_ETC; | ||
591 | } | ||
592 | count = min(port->break_length, 0xff); | ||
593 | sbus_writeb(CD180_C_ESC, | ||
594 | &bp->r[chip]->r[CD180_TDR]); | ||
595 | sbus_writeb(CD180_C_DELAY, | ||
596 | &bp->r[chip]->r[CD180_TDR]); | ||
597 | sbus_writeb(count, | ||
598 | &bp->r[chip]->r[CD180_TDR]); | ||
599 | if (!(port->break_length -= count)) | ||
600 | port->break_length--; | ||
601 | } else { | ||
602 | sbus_writeb(CD180_C_ESC, | ||
603 | &bp->r[chip]->r[CD180_TDR]); | ||
604 | sbus_writeb(CD180_C_EBRK, | ||
605 | &bp->r[chip]->r[CD180_TDR]); | ||
606 | sbus_writeb(port->COR2, | ||
607 | &bp->r[chip]->r[CD180_COR2]); | ||
608 | aurora_wait_CCR(bp->r[chip]); | ||
609 | sbus_writeb(CCR_CORCHG2, | ||
610 | &bp->r[chip]->r[CD180_CCR]); | ||
611 | port->break_length = 0; | ||
612 | } | ||
613 | return; | ||
614 | } | ||
615 | |||
616 | count = CD180_NFIFO; | ||
617 | do { | ||
618 | u8 byte = port->xmit_buf[port->xmit_tail++]; | ||
619 | |||
620 | sbus_writeb(byte, &bp->r[chip]->r[CD180_TDR]); | ||
621 | port->xmit_tail = port->xmit_tail & (SERIAL_XMIT_SIZE-1); | ||
622 | if (--port->xmit_cnt <= 0) | ||
623 | break; | ||
624 | } while (--count > 0); | ||
625 | |||
626 | if (port->xmit_cnt <= 0) { | ||
627 | sbus_writeb(port_No(port) & 7, | ||
628 | &bp->r[chip]->r[CD180_CAR]); | ||
629 | udelay(1); | ||
630 | port->SRER &= ~SRER_TXRDY; | ||
631 | sbus_writeb(port->SRER, | ||
632 | &bp->r[chip]->r[CD180_SRER]); | ||
633 | } | ||
634 | if (port->xmit_cnt <= port->wakeup_chars) | ||
635 | aurora_mark_event(port, RS_EVENT_WRITE_WAKEUP); | ||
636 | } | ||
637 | |||
638 | static void aurora_check_modem(struct Aurora_board const * bp, int chip) | ||
639 | { | ||
640 | struct Aurora_port *port; | ||
641 | struct tty_struct *tty; | ||
642 | unsigned char mcr; | ||
643 | |||
644 | if (!(port = aurora_get_port(bp, chip, "Modem"))) | ||
645 | return; | ||
646 | |||
647 | tty = port->tty; | ||
648 | |||
649 | mcr = sbus_readb(&bp->r[chip]->r[CD180_MCR]); | ||
650 | if (mcr & MCR_CDCHG) { | ||
651 | if (sbus_readb(&bp->r[chip]->r[CD180_MSVR]) & MSVR_CD) | ||
652 | wake_up_interruptible(&port->open_wait); | ||
653 | else | ||
654 | schedule_task(&port->tqueue_hangup); | ||
655 | } | ||
656 | |||
657 | /* We don't have such things yet. My aurora board has DTR and RTS swapped, but that doesn't count in this driver. Let's hope | ||
658 | * Aurora didn't made any boards with CTS or DSR broken... | ||
659 | */ | ||
660 | /* #ifdef AURORA_BRAIN_DAMAGED_CTS | ||
661 | if (mcr & MCR_CTSCHG) { | ||
662 | if (aurora_in(bp, CD180_MSVR) & MSVR_CTS) { | ||
663 | tty->hw_stopped = 0; | ||
664 | port->SRER |= SRER_TXRDY; | ||
665 | if (port->xmit_cnt <= port->wakeup_chars) | ||
666 | aurora_mark_event(port, RS_EVENT_WRITE_WAKEUP); | ||
667 | } else { | ||
668 | tty->hw_stopped = 1; | ||
669 | port->SRER &= ~SRER_TXRDY; | ||
670 | } | ||
671 | sbus_writeb(port->SRER, &bp->r[chip]->r[CD180_SRER]); | ||
672 | } | ||
673 | if (mcr & MCR_DSRCHG) { | ||
674 | if (aurora_in(bp, CD180_MSVR) & MSVR_DSR) { | ||
675 | tty->hw_stopped = 0; | ||
676 | port->SRER |= SRER_TXRDY; | ||
677 | if (port->xmit_cnt <= port->wakeup_chars) | ||
678 | aurora_mark_event(port, RS_EVENT_WRITE_WAKEUP); | ||
679 | } else { | ||
680 | tty->hw_stopped = 1; | ||
681 | port->SRER &= ~SRER_TXRDY; | ||
682 | } | ||
683 | sbus_writeb(port->SRER, &bp->r[chip]->r[CD180_SRER]); | ||
684 | } | ||
685 | #endif AURORA_BRAIN_DAMAGED_CTS */ | ||
686 | |||
687 | /* Clear change bits */ | ||
688 | sbus_writeb(0, &bp->r[chip]->r[CD180_MCR]); | ||
689 | } | ||
690 | |||
691 | /* The main interrupt processing routine */ | ||
692 | static irqreturn_t aurora_interrupt(int irq, void * dev_id) | ||
693 | { | ||
694 | unsigned char status; | ||
695 | unsigned char ack,chip/*,chip_id*/; | ||
696 | struct Aurora_board * bp = (struct Aurora_board *) dev_id; | ||
697 | unsigned long loop = 0; | ||
698 | |||
699 | #ifdef AURORA_INT_DEBUG | ||
700 | printk("IRQ%d %d\n",irq,++irqhit); | ||
701 | #ifdef AURORA_FLOODPRO | ||
702 | if (irqhit>=AURORA_FLOODPRO) | ||
703 | sbus_writeb(8, &bp->r0->r); | ||
704 | #endif | ||
705 | #endif | ||
706 | |||
707 | /* old bp = IRQ_to_board[irq&0x0f];*/ | ||
708 | |||
709 | if (!bp || !(bp->flags & AURORA_BOARD_ACTIVE)) | ||
710 | return IRQ_NONE; | ||
711 | |||
712 | /* The while() below takes care of this. | ||
713 | status = sbus_readb(&bp->r[0]->r[CD180_SRSR]); | ||
714 | #ifdef AURORA_INT_DEBUG | ||
715 | printk("mumu: %02x\n", status); | ||
716 | #endif | ||
717 | if (!(status&SRSR_ANYINT)) | ||
718 | return IRQ_NONE; * Nobody has anything to say, so exit * | ||
719 | */ | ||
720 | while ((loop++ < 48) && | ||
721 | (status = sbus_readb(&bp->r[0]->r[CD180_SRSR]) & SRSR_ANYINT)){ | ||
722 | #ifdef AURORA_INT_DEBUG | ||
723 | printk("SRSR: %02x\n", status); | ||
724 | #endif | ||
725 | if (status & SRSR_REXT) { | ||
726 | ack = sbus_readb(&bp->r3->r[bp->ACK_RINT]); | ||
727 | #ifdef AURORA_INT_DEBUG | ||
728 | printk("R-ACK %02x\n", ack); | ||
729 | #endif | ||
730 | if ((ack >> 5) == board_No(bp)) { | ||
731 | if ((chip=((ack>>3)&3)-1) < AURORA_NCD180) { | ||
732 | if ((ack&GSVR_ITMASK)==GSVR_IT_RGD) { | ||
733 | aurora_receive(bp,chip); | ||
734 | sbus_writeb(0, | ||
735 | &bp->r[chip]->r[CD180_EOSRR]); | ||
736 | } else if ((ack & GSVR_ITMASK) == GSVR_IT_REXC) { | ||
737 | aurora_receive_exc(bp,chip); | ||
738 | sbus_writeb(0, | ||
739 | &bp->r[chip]->r[CD180_EOSRR]); | ||
740 | } | ||
741 | } | ||
742 | } | ||
743 | } else if (status & SRSR_TEXT) { | ||
744 | ack = sbus_readb(&bp->r3->r[bp->ACK_TINT]); | ||
745 | #ifdef AURORA_INT_DEBUG | ||
746 | printk("T-ACK %02x\n", ack); | ||
747 | #endif | ||
748 | if ((ack >> 5) == board_No(bp)) { | ||
749 | if ((chip=((ack>>3)&3)-1) < AURORA_NCD180) { | ||
750 | if ((ack&GSVR_ITMASK)==GSVR_IT_TX) { | ||
751 | aurora_transmit(bp,chip); | ||
752 | sbus_writeb(0, | ||
753 | &bp->r[chip]->r[CD180_EOSRR]); | ||
754 | } | ||
755 | } | ||
756 | } | ||
757 | } else if (status & SRSR_MEXT) { | ||
758 | ack = sbus_readb(&bp->r3->r[bp->ACK_MINT]); | ||
759 | #ifdef AURORA_INT_DEBUG | ||
760 | printk("M-ACK %02x\n", ack); | ||
761 | #endif | ||
762 | if ((ack >> 5) == board_No(bp)) { | ||
763 | if ((chip = ((ack>>3)&3)-1) < AURORA_NCD180) { | ||
764 | if ((ack&GSVR_ITMASK)==GSVR_IT_MDM) { | ||
765 | aurora_check_modem(bp,chip); | ||
766 | sbus_writeb(0, | ||
767 | &bp->r[chip]->r[CD180_EOSRR]); | ||
768 | } | ||
769 | } | ||
770 | } | ||
771 | } | ||
772 | } | ||
773 | /* I guess this faster code can be used with CD1865, using AUROPRI and GLOBPRI. */ | ||
774 | #if 0 | ||
775 | while ((loop++ < 48)&&(status=bp->r[0]->r[CD180_SRSR]&SRSR_ANYINT)){ | ||
776 | #ifdef AURORA_INT_DEBUG | ||
777 | printk("SRSR: %02x\n",status); | ||
778 | #endif | ||
779 | ack = sbus_readb(&bp->r3->r[0]); | ||
780 | #ifdef AURORA_INT_DEBUG | ||
781 | printk("ACK: %02x\n",ack); | ||
782 | #endif | ||
783 | if ((ack>>5)==board_No(bp)) { | ||
784 | if ((chip=((ack>>3)&3)-1) < AURORA_NCD180) { | ||
785 | ack&=GSVR_ITMASK; | ||
786 | if (ack==GSVR_IT_RGD) { | ||
787 | aurora_receive(bp,chip); | ||
788 | sbus_writeb(0, | ||
789 | &bp->r[chip]->r[CD180_EOSRR]); | ||
790 | } else if (ack==GSVR_IT_REXC) { | ||
791 | aurora_receive_exc(bp,chip); | ||
792 | sbus_writeb(0, | ||
793 | &bp->r[chip]->r[CD180_EOSRR]); | ||
794 | } else if (ack==GSVR_IT_TX) { | ||
795 | aurora_transmit(bp,chip); | ||
796 | sbus_writeb(0, | ||
797 | &bp->r[chip]->r[CD180_EOSRR]); | ||
798 | } else if (ack==GSVR_IT_MDM) { | ||
799 | aurora_check_modem(bp,chip); | ||
800 | sbus_writeb(0, | ||
801 | &bp->r[chip]->r[CD180_EOSRR]); | ||
802 | } | ||
803 | } | ||
804 | } | ||
805 | } | ||
806 | #endif | ||
807 | |||
808 | /* This is the old handling routine, used in riscom8 for only one CD180. I keep it here for reference. */ | ||
809 | #if 0 | ||
810 | for(chip=0;chip<AURORA_NCD180;chip++){ | ||
811 | chip_id=(board_No(bp)<<5)|((chip+1)<<3); | ||
812 | loop=0; | ||
813 | while ((loop++ < 1) && | ||
814 | ((status = sbus_readb(&bp->r[chip]->r[CD180_SRSR])) & | ||
815 | (SRSR_TEXT | SRSR_MEXT | SRSR_REXT))) { | ||
816 | |||
817 | if (status & SRSR_REXT) { | ||
818 | ack = sbus_readb(&bp->r3->r[bp->ACK_RINT]); | ||
819 | if (ack == (chip_id | GSVR_IT_RGD)) { | ||
820 | #ifdef AURORA_INTMSG | ||
821 | printk("RX ACK\n"); | ||
822 | #endif | ||
823 | aurora_receive(bp,chip); | ||
824 | } else if (ack == (chip_id | GSVR_IT_REXC)) { | ||
825 | #ifdef AURORA_INTMSG | ||
826 | printk("RXC ACK\n"); | ||
827 | #endif | ||
828 | aurora_receive_exc(bp,chip); | ||
829 | } else { | ||
830 | #ifdef AURORA_INTNORM | ||
831 | printk("aurora%d-%d: Bad receive ack 0x%02x.\n", | ||
832 | board_No(bp), chip, ack); | ||
833 | #endif | ||
834 | } | ||
835 | } else if (status & SRSR_TEXT) { | ||
836 | ack = sbus_readb(&bp->r3->r[bp->ACK_TINT]); | ||
837 | if (ack == (chip_id | GSVR_IT_TX)){ | ||
838 | #ifdef AURORA_INTMSG | ||
839 | printk("TX ACK\n"); | ||
840 | #endif | ||
841 | aurora_transmit(bp,chip); | ||
842 | } else { | ||
843 | #ifdef AURORA_INTNORM | ||
844 | printk("aurora%d-%d: Bad transmit ack 0x%02x.\n", | ||
845 | board_No(bp), chip, ack); | ||
846 | #endif | ||
847 | } | ||
848 | } else if (status & SRSR_MEXT) { | ||
849 | ack = sbus_readb(&bp->r3->r[bp->ACK_MINT]); | ||
850 | if (ack == (chip_id | GSVR_IT_MDM)){ | ||
851 | #ifdef AURORA_INTMSG | ||
852 | printk("MDM ACK\n"); | ||
853 | #endif | ||
854 | aurora_check_modem(bp,chip); | ||
855 | } else { | ||
856 | #ifdef AURORA_INTNORM | ||
857 | printk("aurora%d-%d: Bad modem ack 0x%02x.\n", | ||
858 | board_No(bp), chip, ack); | ||
859 | #endif | ||
860 | } | ||
861 | } | ||
862 | sbus_writeb(0, &bp->r[chip]->r[CD180_EOSRR]); | ||
863 | } | ||
864 | } | ||
865 | #endif | ||
866 | |||
867 | return IRQ_HANDLED; | ||
868 | } | ||
869 | |||
870 | #ifdef AURORA_INT_DEBUG | ||
871 | static void aurora_timer (unsigned long ignored); | ||
872 | |||
873 | static DEFINE_TIMER(aurora_poll_timer, aurora_timer, 0, 0); | ||
874 | |||
875 | static void | ||
876 | aurora_timer (unsigned long ignored) | ||
877 | { | ||
878 | unsigned long flags; | ||
879 | int i; | ||
880 | |||
881 | save_flags(flags); cli(); | ||
882 | |||
883 | printk("SRSR: %02x,%02x - ", | ||
884 | sbus_readb(&aurora_board[0].r[0]->r[CD180_SRSR]), | ||
885 | sbus_readb(&aurora_board[0].r[1]->r[CD180_SRSR])); | ||
886 | for (i = 0; i < 4; i++) { | ||
887 | udelay(1); | ||
888 | printk("%02x ", | ||
889 | sbus_readb(&aurora_board[0].r3->r[i])); | ||
890 | } | ||
891 | printk("\n"); | ||
892 | |||
893 | aurora_poll_timer.expires = jiffies + 300; | ||
894 | add_timer (&aurora_poll_timer); | ||
895 | |||
896 | restore_flags(flags); | ||
897 | } | ||
898 | #endif | ||
899 | |||
900 | /* | ||
901 | * Routines for open & close processing. | ||
902 | */ | ||
903 | |||
904 | /* Called with disabled interrupts */ | ||
905 | static int aurora_setup_board(struct Aurora_board * bp) | ||
906 | { | ||
907 | int error; | ||
908 | |||
909 | #ifdef AURORA_ALLIRQ | ||
910 | int i; | ||
911 | for (i = 0; i < AURORA_ALLIRQ; i++) { | ||
912 | error = request_irq(allirq[i]|0x30, aurora_interrupt, IRQF_SHARED, | ||
913 | "sio16", bp); | ||
914 | if (error) | ||
915 | printk(KERN_ERR "IRQ%d request error %d\n", | ||
916 | allirq[i], error); | ||
917 | } | ||
918 | #else | ||
919 | error = request_irq(bp->irq|0x30, aurora_interrupt, IRQF_SHARED, | ||
920 | "sio16", bp); | ||
921 | if (error) { | ||
922 | printk(KERN_ERR "IRQ request error %d\n", error); | ||
923 | return error; | ||
924 | } | ||
925 | #endif | ||
926 | /* Board reset */ | ||
927 | sbus_writeb(0, &bp->r0->r); | ||
928 | udelay(1); | ||
929 | if (bp->flags & AURORA_BOARD_TYPE_2) { | ||
930 | /* unknown yet */ | ||
931 | } else { | ||
932 | sbus_writeb((AURORA_CFG_ENABLE_IO | AURORA_CFG_ENABLE_IRQ | | ||
933 | (((bp->irq)&0x0f)>>2)), | ||
934 | &bp->r0->r); | ||
935 | } | ||
936 | udelay(10000); | ||
937 | |||
938 | if (aurora_init_CD180(bp,0))error=1;error=0; | ||
939 | if (aurora_init_CD180(bp,1))error++; | ||
940 | if (error == AURORA_NCD180) { | ||
941 | printk(KERN_ERR "Both chips failed initialisation.\n"); | ||
942 | return -EIO; | ||
943 | } | ||
944 | |||
945 | #ifdef AURORA_INT_DEBUG | ||
946 | aurora_poll_timer.expires= jiffies + 1; | ||
947 | add_timer(&aurora_poll_timer); | ||
948 | #endif | ||
949 | #ifdef AURORA_DEBUG | ||
950 | printk("aurora_setup_board: end\n"); | ||
951 | #endif | ||
952 | return 0; | ||
953 | } | ||
954 | |||
955 | /* Called with disabled interrupts */ | ||
956 | static void aurora_shutdown_board(struct Aurora_board *bp) | ||
957 | { | ||
958 | int i; | ||
959 | |||
960 | #ifdef AURORA_DEBUG | ||
961 | printk("aurora_shutdown_board: start\n"); | ||
962 | #endif | ||
963 | |||
964 | #ifdef AURORA_INT_DEBUG | ||
965 | del_timer(&aurora_poll_timer); | ||
966 | #endif | ||
967 | |||
968 | #ifdef AURORA_ALLIRQ | ||
969 | for(i=0;i<AURORA_ALLIRQ;i++){ | ||
970 | free_irq(allirq[i]|0x30, bp); | ||
971 | /* IRQ_to_board[allirq[i]&0xf] = NULL;*/ | ||
972 | } | ||
973 | #else | ||
974 | free_irq(bp->irq|0x30, bp); | ||
975 | /* IRQ_to_board[bp->irq&0xf] = NULL;*/ | ||
976 | #endif | ||
977 | /* Drop all DTR's */ | ||
978 | for(i=0;i<16;i++){ | ||
979 | sbus_writeb(i & 7, &bp->r[i>>3]->r[CD180_CAR]); | ||
980 | udelay(1); | ||
981 | sbus_writeb(0, &bp->r[i>>3]->r[CD180_MSVR]); | ||
982 | udelay(1); | ||
983 | } | ||
984 | /* Board shutdown */ | ||
985 | sbus_writeb(0, &bp->r0->r); | ||
986 | |||
987 | #ifdef AURORA_DEBUG | ||
988 | printk("aurora_shutdown_board: end\n"); | ||
989 | #endif | ||
990 | } | ||
991 | |||
992 | /* Setting up port characteristics. | ||
993 | * Must be called with disabled interrupts | ||
994 | */ | ||
995 | static void aurora_change_speed(struct Aurora_board *bp, struct Aurora_port *port) | ||
996 | { | ||
997 | struct tty_struct *tty; | ||
998 | unsigned long baud; | ||
999 | long tmp; | ||
1000 | unsigned char cor1 = 0, cor3 = 0; | ||
1001 | unsigned char mcor1 = 0, mcor2 = 0,chip; | ||
1002 | |||
1003 | #ifdef AURORA_DEBUG | ||
1004 | printk("aurora_change_speed: start\n"); | ||
1005 | #endif | ||
1006 | if (!(tty = port->tty) || !tty->termios) | ||
1007 | return; | ||
1008 | |||
1009 | chip = AURORA_CD180(port_No(port)); | ||
1010 | |||
1011 | port->SRER = 0; | ||
1012 | port->COR2 = 0; | ||
1013 | port->MSVR = MSVR_RTS|MSVR_DTR; | ||
1014 | |||
1015 | baud = tty_get_baud_rate(tty); | ||
1016 | |||
1017 | /* Select port on the board */ | ||
1018 | sbus_writeb(port_No(port) & 7, | ||
1019 | &bp->r[chip]->r[CD180_CAR]); | ||
1020 | udelay(1); | ||
1021 | |||
1022 | if (!baud) { | ||
1023 | /* Drop DTR & exit */ | ||
1024 | port->MSVR &= ~(bp->DTR|bp->RTS); | ||
1025 | sbus_writeb(port->MSVR, | ||
1026 | &bp->r[chip]->r[CD180_MSVR]); | ||
1027 | return; | ||
1028 | } else { | ||
1029 | /* Set DTR on */ | ||
1030 | port->MSVR |= bp->DTR; | ||
1031 | sbus_writeb(port->MSVR, | ||
1032 | &bp->r[chip]->r[CD180_MSVR]); | ||
1033 | } | ||
1034 | |||
1035 | /* Now we must calculate some speed dependent things. */ | ||
1036 | |||
1037 | /* Set baud rate for port. */ | ||
1038 | tmp = (((bp->oscfreq + baud/2) / baud + | ||
1039 | CD180_TPC/2) / CD180_TPC); | ||
1040 | |||
1041 | /* tmp = (bp->oscfreq/7)/baud; | ||
1042 | if((tmp%10)>4)tmp=tmp/10+1;else tmp=tmp/10;*/ | ||
1043 | /* printk("Prescaler period: %d\n",tmp);*/ | ||
1044 | |||
1045 | sbus_writeb((tmp >> 8) & 0xff, | ||
1046 | &bp->r[chip]->r[CD180_RBPRH]); | ||
1047 | sbus_writeb((tmp >> 8) & 0xff, | ||
1048 | &bp->r[chip]->r[CD180_TBPRH]); | ||
1049 | sbus_writeb(tmp & 0xff, &bp->r[chip]->r[CD180_RBPRL]); | ||
1050 | sbus_writeb(tmp & 0xff, &bp->r[chip]->r[CD180_TBPRL]); | ||
1051 | |||
1052 | baud = (baud + 5) / 10; /* Estimated CPS */ | ||
1053 | |||
1054 | /* Two timer ticks seems enough to wakeup something like SLIP driver */ | ||
1055 | tmp = ((baud + HZ/2) / HZ) * 2 - CD180_NFIFO; | ||
1056 | port->wakeup_chars = (tmp < 0) ? 0 : ((tmp >= SERIAL_XMIT_SIZE) ? | ||
1057 | SERIAL_XMIT_SIZE - 1 : tmp); | ||
1058 | |||
1059 | /* Receiver timeout will be transmission time for 1.5 chars */ | ||
1060 | tmp = (AURORA_TPS + AURORA_TPS/2 + baud/2) / baud; | ||
1061 | tmp = (tmp > 0xff) ? 0xff : tmp; | ||
1062 | sbus_writeb(tmp, &bp->r[chip]->r[CD180_RTPR]); | ||
1063 | |||
1064 | switch (C_CSIZE(tty)) { | ||
1065 | case CS5: | ||
1066 | cor1 |= COR1_5BITS; | ||
1067 | break; | ||
1068 | case CS6: | ||
1069 | cor1 |= COR1_6BITS; | ||
1070 | break; | ||
1071 | case CS7: | ||
1072 | cor1 |= COR1_7BITS; | ||
1073 | break; | ||
1074 | case CS8: | ||
1075 | cor1 |= COR1_8BITS; | ||
1076 | break; | ||
1077 | } | ||
1078 | |||
1079 | if (C_CSTOPB(tty)) | ||
1080 | cor1 |= COR1_2SB; | ||
1081 | |||
1082 | cor1 |= COR1_IGNORE; | ||
1083 | if (C_PARENB(tty)) { | ||
1084 | cor1 |= COR1_NORMPAR; | ||
1085 | if (C_PARODD(tty)) | ||
1086 | cor1 |= COR1_ODDP; | ||
1087 | if (I_INPCK(tty)) | ||
1088 | cor1 &= ~COR1_IGNORE; | ||
1089 | } | ||
1090 | /* Set marking of some errors */ | ||
1091 | port->mark_mask = RCSR_OE | RCSR_TOUT; | ||
1092 | if (I_INPCK(tty)) | ||
1093 | port->mark_mask |= RCSR_FE | RCSR_PE; | ||
1094 | if (I_BRKINT(tty) || I_PARMRK(tty)) | ||
1095 | port->mark_mask |= RCSR_BREAK; | ||
1096 | if (I_IGNPAR(tty)) | ||
1097 | port->mark_mask &= ~(RCSR_FE | RCSR_PE); | ||
1098 | if (I_IGNBRK(tty)) { | ||
1099 | port->mark_mask &= ~RCSR_BREAK; | ||
1100 | if (I_IGNPAR(tty)) | ||
1101 | /* Real raw mode. Ignore all */ | ||
1102 | port->mark_mask &= ~RCSR_OE; | ||
1103 | } | ||
1104 | /* Enable Hardware Flow Control */ | ||
1105 | if (C_CRTSCTS(tty)) { | ||
1106 | /*#ifdef AURORA_BRAIN_DAMAGED_CTS | ||
1107 | port->SRER |= SRER_DSR | SRER_CTS; | ||
1108 | mcor1 |= MCOR1_DSRZD | MCOR1_CTSZD; | ||
1109 | mcor2 |= MCOR2_DSROD | MCOR2_CTSOD; | ||
1110 | tty->hw_stopped = !(aurora_in(bp, CD180_MSVR) & (MSVR_CTS|MSVR_DSR)); | ||
1111 | #else*/ | ||
1112 | port->COR2 |= COR2_CTSAE; | ||
1113 | /*#endif*/ | ||
1114 | if (bp->flags&AURORA_BOARD_DTR_FLOW_OK) { | ||
1115 | mcor1 |= AURORA_RXTH; | ||
1116 | } | ||
1117 | } | ||
1118 | /* Enable Software Flow Control. FIXME: I'm not sure about this */ | ||
1119 | /* Some people reported that it works, but I still doubt */ | ||
1120 | if (I_IXON(tty)) { | ||
1121 | port->COR2 |= COR2_TXIBE; | ||
1122 | cor3 |= (COR3_FCT | COR3_SCDE); | ||
1123 | if (I_IXANY(tty)) | ||
1124 | port->COR2 |= COR2_IXM; | ||
1125 | sbus_writeb(START_CHAR(tty), | ||
1126 | &bp->r[chip]->r[CD180_SCHR1]); | ||
1127 | sbus_writeb(STOP_CHAR(tty), | ||
1128 | &bp->r[chip]->r[CD180_SCHR2]); | ||
1129 | sbus_writeb(START_CHAR(tty), | ||
1130 | &bp->r[chip]->r[CD180_SCHR3]); | ||
1131 | sbus_writeb(STOP_CHAR(tty), | ||
1132 | &bp->r[chip]->r[CD180_SCHR4]); | ||
1133 | } | ||
1134 | if (!C_CLOCAL(tty)) { | ||
1135 | /* Enable CD check */ | ||
1136 | port->SRER |= SRER_CD; | ||
1137 | mcor1 |= MCOR1_CDZD; | ||
1138 | mcor2 |= MCOR2_CDOD; | ||
1139 | } | ||
1140 | |||
1141 | if (C_CREAD(tty)) | ||
1142 | /* Enable receiver */ | ||
1143 | port->SRER |= SRER_RXD; | ||
1144 | |||
1145 | /* Set input FIFO size (1-8 bytes) */ | ||
1146 | cor3 |= AURORA_RXFIFO; | ||
1147 | /* Setting up CD180 channel registers */ | ||
1148 | sbus_writeb(cor1, &bp->r[chip]->r[CD180_COR1]); | ||
1149 | sbus_writeb(port->COR2, &bp->r[chip]->r[CD180_COR2]); | ||
1150 | sbus_writeb(cor3, &bp->r[chip]->r[CD180_COR3]); | ||
1151 | /* Make CD180 know about registers change */ | ||
1152 | aurora_wait_CCR(bp->r[chip]); | ||
1153 | sbus_writeb(CCR_CORCHG1 | CCR_CORCHG2 | CCR_CORCHG3, | ||
1154 | &bp->r[chip]->r[CD180_CCR]); | ||
1155 | /* Setting up modem option registers */ | ||
1156 | sbus_writeb(mcor1, &bp->r[chip]->r[CD180_MCOR1]); | ||
1157 | sbus_writeb(mcor2, &bp->r[chip]->r[CD180_MCOR2]); | ||
1158 | /* Enable CD180 transmitter & receiver */ | ||
1159 | aurora_wait_CCR(bp->r[chip]); | ||
1160 | sbus_writeb(CCR_TXEN | CCR_RXEN, &bp->r[chip]->r[CD180_CCR]); | ||
1161 | /* Enable interrupts */ | ||
1162 | sbus_writeb(port->SRER, &bp->r[chip]->r[CD180_SRER]); | ||
1163 | /* And finally set RTS on */ | ||
1164 | sbus_writeb(port->MSVR, &bp->r[chip]->r[CD180_MSVR]); | ||
1165 | #ifdef AURORA_DEBUG | ||
1166 | printk("aurora_change_speed: end\n"); | ||
1167 | #endif | ||
1168 | } | ||
1169 | |||
1170 | /* Must be called with interrupts enabled */ | ||
1171 | static int aurora_setup_port(struct Aurora_board *bp, struct Aurora_port *port) | ||
1172 | { | ||
1173 | unsigned long flags; | ||
1174 | |||
1175 | #ifdef AURORA_DEBUG | ||
1176 | printk("aurora_setup_port: start %d\n",port_No(port)); | ||
1177 | #endif | ||
1178 | if (port->flags & ASYNC_INITIALIZED) | ||
1179 | return 0; | ||
1180 | |||
1181 | if (!port->xmit_buf) { | ||
1182 | /* We may sleep in get_zeroed_page() */ | ||
1183 | unsigned long tmp; | ||
1184 | |||
1185 | if (!(tmp = get_zeroed_page(GFP_KERNEL))) | ||
1186 | return -ENOMEM; | ||
1187 | |||
1188 | if (port->xmit_buf) { | ||
1189 | free_page(tmp); | ||
1190 | return -ERESTARTSYS; | ||
1191 | } | ||
1192 | port->xmit_buf = (unsigned char *) tmp; | ||
1193 | } | ||
1194 | |||
1195 | save_flags(flags); cli(); | ||
1196 | |||
1197 | if (port->tty) | ||
1198 | clear_bit(TTY_IO_ERROR, &port->tty->flags); | ||
1199 | |||
1200 | #ifdef MODULE | ||
1201 | if ((port->count == 1) && ((++bp->count) == 1)) | ||
1202 | bp->flags |= AURORA_BOARD_ACTIVE; | ||
1203 | #endif | ||
1204 | |||
1205 | port->xmit_cnt = port->xmit_head = port->xmit_tail = 0; | ||
1206 | aurora_change_speed(bp, port); | ||
1207 | port->flags |= ASYNC_INITIALIZED; | ||
1208 | |||
1209 | restore_flags(flags); | ||
1210 | #ifdef AURORA_DEBUG | ||
1211 | printk("aurora_setup_port: end\n"); | ||
1212 | #endif | ||
1213 | return 0; | ||
1214 | } | ||
1215 | |||
1216 | /* Must be called with interrupts disabled */ | ||
1217 | static void aurora_shutdown_port(struct Aurora_board *bp, struct Aurora_port *port) | ||
1218 | { | ||
1219 | struct tty_struct *tty; | ||
1220 | unsigned char chip; | ||
1221 | |||
1222 | #ifdef AURORA_DEBUG | ||
1223 | printk("aurora_shutdown_port: start\n"); | ||
1224 | #endif | ||
1225 | if (!(port->flags & ASYNC_INITIALIZED)) | ||
1226 | return; | ||
1227 | |||
1228 | chip = AURORA_CD180(port_No(port)); | ||
1229 | |||
1230 | #ifdef AURORA_REPORT_OVERRUN | ||
1231 | printk("aurora%d: port %d: Total %ld overruns were detected.\n", | ||
1232 | board_No(bp), port_No(port), port->overrun); | ||
1233 | #endif | ||
1234 | #ifdef AURORA_REPORT_FIFO | ||
1235 | { | ||
1236 | int i; | ||
1237 | |||
1238 | printk("aurora%d: port %d: FIFO hits [ ", | ||
1239 | board_No(bp), port_No(port)); | ||
1240 | for (i = 0; i < 10; i++) { | ||
1241 | printk("%ld ", port->hits[i]); | ||
1242 | } | ||
1243 | printk("].\n"); | ||
1244 | } | ||
1245 | #endif | ||
1246 | if (port->xmit_buf) { | ||
1247 | free_page((unsigned long) port->xmit_buf); | ||
1248 | port->xmit_buf = NULL; | ||
1249 | } | ||
1250 | |||
1251 | if (!(tty = port->tty) || C_HUPCL(tty)) { | ||
1252 | /* Drop DTR */ | ||
1253 | port->MSVR &= ~(bp->DTR|bp->RTS); | ||
1254 | sbus_writeb(port->MSVR, | ||
1255 | &bp->r[chip]->r[CD180_MSVR]); | ||
1256 | } | ||
1257 | |||
1258 | /* Select port */ | ||
1259 | sbus_writeb(port_No(port) & 7, | ||
1260 | &bp->r[chip]->r[CD180_CAR]); | ||
1261 | udelay(1); | ||
1262 | |||
1263 | /* Reset port */ | ||
1264 | aurora_wait_CCR(bp->r[chip]); | ||
1265 | sbus_writeb(CCR_SOFTRESET, &bp->r[chip]->r[CD180_CCR]); | ||
1266 | |||
1267 | /* Disable all interrupts from this port */ | ||
1268 | port->SRER = 0; | ||
1269 | sbus_writeb(port->SRER, &bp->r[chip]->r[CD180_SRER]); | ||
1270 | |||
1271 | if (tty) | ||
1272 | set_bit(TTY_IO_ERROR, &tty->flags); | ||
1273 | port->flags &= ~ASYNC_INITIALIZED; | ||
1274 | |||
1275 | #ifdef MODULE | ||
1276 | if (--bp->count < 0) { | ||
1277 | printk(KERN_DEBUG "aurora%d: aurora_shutdown_port: " | ||
1278 | "bad board count: %d\n", | ||
1279 | board_No(bp), bp->count); | ||
1280 | bp->count = 0; | ||
1281 | } | ||
1282 | |||
1283 | if (!bp->count) | ||
1284 | bp->flags &= ~AURORA_BOARD_ACTIVE; | ||
1285 | #endif | ||
1286 | |||
1287 | #ifdef AURORA_DEBUG | ||
1288 | printk("aurora_shutdown_port: end\n"); | ||
1289 | #endif | ||
1290 | } | ||
1291 | |||
1292 | |||
1293 | static int block_til_ready(struct tty_struct *tty, struct file * filp, | ||
1294 | struct Aurora_port *port) | ||
1295 | { | ||
1296 | DECLARE_WAITQUEUE(wait, current); | ||
1297 | struct Aurora_board *bp = port_Board(port); | ||
1298 | int retval; | ||
1299 | int do_clocal = 0; | ||
1300 | int CD; | ||
1301 | unsigned char chip; | ||
1302 | |||
1303 | #ifdef AURORA_DEBUG | ||
1304 | printk("block_til_ready: start\n"); | ||
1305 | #endif | ||
1306 | chip = AURORA_CD180(port_No(port)); | ||
1307 | |||
1308 | /* If the device is in the middle of being closed, then block | ||
1309 | * until it's done, and then try again. | ||
1310 | */ | ||
1311 | if (tty_hung_up_p(filp) || port->flags & ASYNC_CLOSING) { | ||
1312 | interruptible_sleep_on(&port->close_wait); | ||
1313 | if (port->flags & ASYNC_HUP_NOTIFY) | ||
1314 | return -EAGAIN; | ||
1315 | else | ||
1316 | return -ERESTARTSYS; | ||
1317 | } | ||
1318 | |||
1319 | /* If non-blocking mode is set, or the port is not enabled, | ||
1320 | * then make the check up front and then exit. | ||
1321 | */ | ||
1322 | if ((filp->f_flags & O_NONBLOCK) || | ||
1323 | (tty->flags & (1 << TTY_IO_ERROR))) { | ||
1324 | port->flags |= ASYNC_NORMAL_ACTIVE; | ||
1325 | return 0; | ||
1326 | } | ||
1327 | |||
1328 | if (C_CLOCAL(tty)) | ||
1329 | do_clocal = 1; | ||
1330 | |||
1331 | /* Block waiting for the carrier detect and the line to become | ||
1332 | * free (i.e., not in use by the callout). While we are in | ||
1333 | * this loop, info->count is dropped by one, so that | ||
1334 | * rs_close() knows when to free things. We restore it upon | ||
1335 | * exit, either normal or abnormal. | ||
1336 | */ | ||
1337 | retval = 0; | ||
1338 | add_wait_queue(&port->open_wait, &wait); | ||
1339 | cli(); | ||
1340 | if (!tty_hung_up_p(filp)) | ||
1341 | port->count--; | ||
1342 | sti(); | ||
1343 | port->blocked_open++; | ||
1344 | while (1) { | ||
1345 | cli(); | ||
1346 | sbus_writeb(port_No(port) & 7, | ||
1347 | &bp->r[chip]->r[CD180_CAR]); | ||
1348 | udelay(1); | ||
1349 | CD = sbus_readb(&bp->r[chip]->r[CD180_MSVR]) & MSVR_CD; | ||
1350 | port->MSVR=bp->RTS; | ||
1351 | |||
1352 | /* auto drops DTR */ | ||
1353 | sbus_writeb(port->MSVR, &bp->r[chip]->r[CD180_MSVR]); | ||
1354 | sti(); | ||
1355 | set_current_state(TASK_INTERRUPTIBLE); | ||
1356 | if (tty_hung_up_p(filp) || | ||
1357 | !(port->flags & ASYNC_INITIALIZED)) { | ||
1358 | if (port->flags & ASYNC_HUP_NOTIFY) | ||
1359 | retval = -EAGAIN; | ||
1360 | else | ||
1361 | retval = -ERESTARTSYS; | ||
1362 | break; | ||
1363 | } | ||
1364 | if (!(port->flags & ASYNC_CLOSING) && | ||
1365 | (do_clocal || CD)) | ||
1366 | break; | ||
1367 | if (signal_pending(current)) { | ||
1368 | retval = -ERESTARTSYS; | ||
1369 | break; | ||
1370 | } | ||
1371 | schedule(); | ||
1372 | } | ||
1373 | current->state = TASK_RUNNING; | ||
1374 | remove_wait_queue(&port->open_wait, &wait); | ||
1375 | if (!tty_hung_up_p(filp)) | ||
1376 | port->count++; | ||
1377 | port->blocked_open--; | ||
1378 | if (retval) | ||
1379 | return retval; | ||
1380 | |||
1381 | port->flags |= ASYNC_NORMAL_ACTIVE; | ||
1382 | #ifdef AURORA_DEBUG | ||
1383 | printk("block_til_ready: end\n"); | ||
1384 | #endif | ||
1385 | return 0; | ||
1386 | } | ||
1387 | |||
1388 | static int aurora_open(struct tty_struct * tty, struct file * filp) | ||
1389 | { | ||
1390 | int board; | ||
1391 | int error; | ||
1392 | struct Aurora_port * port; | ||
1393 | struct Aurora_board * bp; | ||
1394 | unsigned long flags; | ||
1395 | |||
1396 | #ifdef AURORA_DEBUG | ||
1397 | printk("aurora_open: start\n"); | ||
1398 | #endif | ||
1399 | |||
1400 | board = AURORA_BOARD(tty->index); | ||
1401 | if (board > AURORA_NBOARD || | ||
1402 | !(aurora_board[board].flags & AURORA_BOARD_PRESENT)) { | ||
1403 | #ifdef AURORA_DEBUG | ||
1404 | printk("aurora_open: error board %d present %d\n", | ||
1405 | board, aurora_board[board].flags & AURORA_BOARD_PRESENT); | ||
1406 | #endif | ||
1407 | return -ENODEV; | ||
1408 | } | ||
1409 | |||
1410 | bp = &aurora_board[board]; | ||
1411 | port = aurora_port + board * AURORA_NPORT * AURORA_NCD180 + AURORA_PORT(tty->index); | ||
1412 | if ((aurora_paranoia_check(port, tty->name, "aurora_open")) { | ||
1413 | #ifdef AURORA_DEBUG | ||
1414 | printk("aurora_open: error paranoia check\n"); | ||
1415 | #endif | ||
1416 | return -ENODEV; | ||
1417 | } | ||
1418 | |||
1419 | port->count++; | ||
1420 | tty->driver_data = port; | ||
1421 | port->tty = tty; | ||
1422 | |||
1423 | if ((error = aurora_setup_port(bp, port))) { | ||
1424 | #ifdef AURORA_DEBUG | ||
1425 | printk("aurora_open: error aurora_setup_port ret %d\n",error); | ||
1426 | #endif | ||
1427 | return error; | ||
1428 | } | ||
1429 | |||
1430 | if ((error = block_til_ready(tty, filp, port))) { | ||
1431 | #ifdef AURORA_DEBUG | ||
1432 | printk("aurora_open: error block_til_ready ret %d\n",error); | ||
1433 | #endif | ||
1434 | return error; | ||
1435 | } | ||
1436 | |||
1437 | #ifdef AURORA_DEBUG | ||
1438 | printk("aurora_open: end\n"); | ||
1439 | #endif | ||
1440 | return 0; | ||
1441 | } | ||
1442 | |||
1443 | static void aurora_close(struct tty_struct * tty, struct file * filp) | ||
1444 | { | ||
1445 | struct Aurora_port *port = (struct Aurora_port *) tty->driver_data; | ||
1446 | struct Aurora_board *bp; | ||
1447 | unsigned long flags; | ||
1448 | unsigned long timeout; | ||
1449 | unsigned char chip; | ||
1450 | |||
1451 | #ifdef AURORA_DEBUG | ||
1452 | printk("aurora_close: start\n"); | ||
1453 | #endif | ||
1454 | |||
1455 | if (!port || (aurora_paranoia_check(port, tty->name, "close")) | ||
1456 | return; | ||
1457 | |||
1458 | chip = AURORA_CD180(port_No(port)); | ||
1459 | |||
1460 | save_flags(flags); cli(); | ||
1461 | if (tty_hung_up_p(filp)) { | ||
1462 | restore_flags(flags); | ||
1463 | return; | ||
1464 | } | ||
1465 | |||
1466 | bp = port_Board(port); | ||
1467 | if ((tty->count == 1) && (port->count != 1)) { | ||
1468 | printk(KERN_DEBUG "aurora%d: aurora_close: bad port count; " | ||
1469 | "tty->count is 1, port count is %d\n", | ||
1470 | board_No(bp), port->count); | ||
1471 | port->count = 1; | ||
1472 | } | ||
1473 | if (--port->count < 0) { | ||
1474 | printk(KERN_DEBUG "aurora%d: aurora_close: bad port " | ||
1475 | "count for tty%d: %d\n", | ||
1476 | board_No(bp), port_No(port), port->count); | ||
1477 | port->count = 0; | ||
1478 | } | ||
1479 | if (port->count) { | ||
1480 | restore_flags(flags); | ||
1481 | return; | ||
1482 | } | ||
1483 | port->flags |= ASYNC_CLOSING; | ||
1484 | |||
1485 | /* Now we wait for the transmit buffer to clear; and we notify | ||
1486 | * the line discipline to only process XON/XOFF characters. | ||
1487 | */ | ||
1488 | tty->closing = 1; | ||
1489 | if (port->closing_wait != ASYNC_CLOSING_WAIT_NONE){ | ||
1490 | #ifdef AURORA_DEBUG | ||
1491 | printk("aurora_close: waiting to flush...\n"); | ||
1492 | #endif | ||
1493 | tty_wait_until_sent(tty, port->closing_wait); | ||
1494 | } | ||
1495 | |||
1496 | /* At this point we stop accepting input. To do this, we | ||
1497 | * disable the receive line status interrupts, and tell the | ||
1498 | * interrupt driver to stop checking the data ready bit in the | ||
1499 | * line status register. | ||
1500 | */ | ||
1501 | port->SRER &= ~SRER_RXD; | ||
1502 | if (port->flags & ASYNC_INITIALIZED) { | ||
1503 | port->SRER &= ~SRER_TXRDY; | ||
1504 | port->SRER |= SRER_TXEMPTY; | ||
1505 | sbus_writeb(port_No(port) & 7, | ||
1506 | &bp->r[chip]->r[CD180_CAR]); | ||
1507 | udelay(1); | ||
1508 | sbus_writeb(port->SRER, &bp->r[chip]->r[CD180_SRER]); | ||
1509 | /* | ||
1510 | * Before we drop DTR, make sure the UART transmitter | ||
1511 | * has completely drained; this is especially | ||
1512 | * important if there is a transmit FIFO! | ||
1513 | */ | ||
1514 | timeout = jiffies+HZ; | ||
1515 | while(port->SRER & SRER_TXEMPTY) { | ||
1516 | msleep_interruptible(jiffies_to_msecs(port->timeout)); | ||
1517 | if (time_after(jiffies, timeout)) | ||
1518 | break; | ||
1519 | } | ||
1520 | } | ||
1521 | #ifdef AURORA_DEBUG | ||
1522 | printk("aurora_close: shutdown_port\n"); | ||
1523 | #endif | ||
1524 | aurora_shutdown_port(bp, port); | ||
1525 | if (tty->driver->flush_buffer) | ||
1526 | tty->driver->flush_buffer(tty); | ||
1527 | tty_ldisc_flush(tty); | ||
1528 | tty->closing = 0; | ||
1529 | port->event = 0; | ||
1530 | port->tty = 0; | ||
1531 | if (port->blocked_open) { | ||
1532 | if (port->close_delay) { | ||
1533 | msleep_interruptible(jiffies_to_msecs(port->close_delay)); | ||
1534 | } | ||
1535 | wake_up_interruptible(&port->open_wait); | ||
1536 | } | ||
1537 | port->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING); | ||
1538 | wake_up_interruptible(&port->close_wait); | ||
1539 | restore_flags(flags); | ||
1540 | #ifdef AURORA_DEBUG | ||
1541 | printk("aurora_close: end\n"); | ||
1542 | #endif | ||
1543 | } | ||
1544 | |||
1545 | static int aurora_write(struct tty_struct * tty, | ||
1546 | const unsigned char *buf, int count) | ||
1547 | { | ||
1548 | struct Aurora_port *port = (struct Aurora_port *) tty->driver_data; | ||
1549 | struct Aurora_board *bp; | ||
1550 | int c, total = 0; | ||
1551 | unsigned long flags; | ||
1552 | unsigned char chip; | ||
1553 | |||
1554 | #ifdef AURORA_DEBUG | ||
1555 | printk("aurora_write: start %d\n",count); | ||
1556 | #endif | ||
1557 | if ((aurora_paranoia_check(port, tty->name, "aurora_write")) | ||
1558 | return 0; | ||
1559 | |||
1560 | chip = AURORA_CD180(port_No(port)); | ||
1561 | |||
1562 | bp = port_Board(port); | ||
1563 | |||
1564 | if (!tty || !port->xmit_buf || !tmp_buf) | ||
1565 | return 0; | ||
1566 | |||
1567 | save_flags(flags); | ||
1568 | while (1) { | ||
1569 | cli(); | ||
1570 | c = min(count, min(SERIAL_XMIT_SIZE - port->xmit_cnt - 1, | ||
1571 | SERIAL_XMIT_SIZE - port->xmit_head)); | ||
1572 | if (c <= 0) { | ||
1573 | restore_flags(flags); | ||
1574 | break; | ||
1575 | } | ||
1576 | memcpy(port->xmit_buf + port->xmit_head, buf, c); | ||
1577 | port->xmit_head = (port->xmit_head + c) & (SERIAL_XMIT_SIZE-1); | ||
1578 | port->xmit_cnt += c; | ||
1579 | restore_flags(flags); | ||
1580 | |||
1581 | buf += c; | ||
1582 | count -= c; | ||
1583 | total += c; | ||
1584 | } | ||
1585 | |||
1586 | cli(); | ||
1587 | if (port->xmit_cnt && !tty->stopped && !tty->hw_stopped && | ||
1588 | !(port->SRER & SRER_TXRDY)) { | ||
1589 | port->SRER |= SRER_TXRDY; | ||
1590 | sbus_writeb(port_No(port) & 7, | ||
1591 | &bp->r[chip]->r[CD180_CAR]); | ||
1592 | udelay(1); | ||
1593 | sbus_writeb(port->SRER, &bp->r[chip]->r[CD180_SRER]); | ||
1594 | } | ||
1595 | restore_flags(flags); | ||
1596 | #ifdef AURORA_DEBUG | ||
1597 | printk("aurora_write: end %d\n",total); | ||
1598 | #endif | ||
1599 | return total; | ||
1600 | } | ||
1601 | |||
1602 | static void aurora_put_char(struct tty_struct * tty, unsigned char ch) | ||
1603 | { | ||
1604 | struct Aurora_port *port = (struct Aurora_port *) tty->driver_data; | ||
1605 | unsigned long flags; | ||
1606 | |||
1607 | #ifdef AURORA_DEBUG | ||
1608 | printk("aurora_put_char: start %c\n",ch); | ||
1609 | #endif | ||
1610 | if ((aurora_paranoia_check(port, tty->name, "aurora_put_char")) | ||
1611 | return; | ||
1612 | |||
1613 | if (!tty || !port->xmit_buf) | ||
1614 | return; | ||
1615 | |||
1616 | save_flags(flags); cli(); | ||
1617 | |||
1618 | if (port->xmit_cnt >= SERIAL_XMIT_SIZE - 1) { | ||
1619 | restore_flags(flags); | ||
1620 | return; | ||
1621 | } | ||
1622 | |||
1623 | port->xmit_buf[port->xmit_head++] = ch; | ||
1624 | port->xmit_head &= SERIAL_XMIT_SIZE - 1; | ||
1625 | port->xmit_cnt++; | ||
1626 | restore_flags(flags); | ||
1627 | #ifdef AURORA_DEBUG | ||
1628 | printk("aurora_put_char: end\n"); | ||
1629 | #endif | ||
1630 | } | ||
1631 | |||
1632 | static void aurora_flush_chars(struct tty_struct * tty) | ||
1633 | { | ||
1634 | struct Aurora_port *port = (struct Aurora_port *) tty->driver_data; | ||
1635 | unsigned long flags; | ||
1636 | unsigned char chip; | ||
1637 | |||
1638 | /*#ifdef AURORA_DEBUG | ||
1639 | printk("aurora_flush_chars: start\n"); | ||
1640 | #endif*/ | ||
1641 | if ((aurora_paranoia_check(port, tty->name, "aurora_flush_chars")) | ||
1642 | return; | ||
1643 | |||
1644 | chip = AURORA_CD180(port_No(port)); | ||
1645 | |||
1646 | if (port->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped || | ||
1647 | !port->xmit_buf) | ||
1648 | return; | ||
1649 | |||
1650 | save_flags(flags); cli(); | ||
1651 | port->SRER |= SRER_TXRDY; | ||
1652 | sbus_writeb(port_No(port) & 7, | ||
1653 | &port_Board(port)->r[chip]->r[CD180_CAR]); | ||
1654 | udelay(1); | ||
1655 | sbus_writeb(port->SRER, | ||
1656 | &port_Board(port)->r[chip]->r[CD180_SRER]); | ||
1657 | restore_flags(flags); | ||
1658 | /*#ifdef AURORA_DEBUG | ||
1659 | printk("aurora_flush_chars: end\n"); | ||
1660 | #endif*/ | ||
1661 | } | ||
1662 | |||
1663 | static int aurora_write_room(struct tty_struct * tty) | ||
1664 | { | ||
1665 | struct Aurora_port *port = (struct Aurora_port *) tty->driver_data; | ||
1666 | int ret; | ||
1667 | |||
1668 | #ifdef AURORA_DEBUG | ||
1669 | printk("aurora_write_room: start\n"); | ||
1670 | #endif | ||
1671 | if ((aurora_paranoia_check(port, tty->name, "aurora_write_room")) | ||
1672 | return 0; | ||
1673 | |||
1674 | ret = SERIAL_XMIT_SIZE - port->xmit_cnt - 1; | ||
1675 | if (ret < 0) | ||
1676 | ret = 0; | ||
1677 | #ifdef AURORA_DEBUG | ||
1678 | printk("aurora_write_room: end\n"); | ||
1679 | #endif | ||
1680 | return ret; | ||
1681 | } | ||
1682 | |||
1683 | static int aurora_chars_in_buffer(struct tty_struct *tty) | ||
1684 | { | ||
1685 | struct Aurora_port *port = (struct Aurora_port *) tty->driver_data; | ||
1686 | |||
1687 | if ((aurora_paranoia_check(port, tty->name, "aurora_chars_in_buffer")) | ||
1688 | return 0; | ||
1689 | |||
1690 | return port->xmit_cnt; | ||
1691 | } | ||
1692 | |||
1693 | static void aurora_flush_buffer(struct tty_struct *tty) | ||
1694 | { | ||
1695 | struct Aurora_port *port = (struct Aurora_port *) tty->driver_data; | ||
1696 | unsigned long flags; | ||
1697 | |||
1698 | #ifdef AURORA_DEBUG | ||
1699 | printk("aurora_flush_buffer: start\n"); | ||
1700 | #endif | ||
1701 | if ((aurora_paranoia_check(port, tty->name, "aurora_flush_buffer")) | ||
1702 | return; | ||
1703 | |||
1704 | save_flags(flags); cli(); | ||
1705 | port->xmit_cnt = port->xmit_head = port->xmit_tail = 0; | ||
1706 | restore_flags(flags); | ||
1707 | |||
1708 | tty_wakeup(tty); | ||
1709 | #ifdef AURORA_DEBUG | ||
1710 | printk("aurora_flush_buffer: end\n"); | ||
1711 | #endif | ||
1712 | } | ||
1713 | |||
1714 | static int aurora_tiocmget(struct tty_struct *tty, struct file *file) | ||
1715 | { | ||
1716 | struct Aurora_port *port = (struct Aurora_port *) tty->driver_data; | ||
1717 | struct Aurora_board * bp; | ||
1718 | unsigned char status,chip; | ||
1719 | unsigned int result; | ||
1720 | unsigned long flags; | ||
1721 | |||
1722 | #ifdef AURORA_DEBUG | ||
1723 | printk("aurora_get_modem_info: start\n"); | ||
1724 | #endif | ||
1725 | if ((aurora_paranoia_check(port, tty->name, __FUNCTION__)) | ||
1726 | return -ENODEV; | ||
1727 | |||
1728 | chip = AURORA_CD180(port_No(port)); | ||
1729 | |||
1730 | bp = port_Board(port); | ||
1731 | |||
1732 | save_flags(flags); cli(); | ||
1733 | |||
1734 | sbus_writeb(port_No(port) & 7, &bp->r[chip]->r[CD180_CAR]); | ||
1735 | udelay(1); | ||
1736 | |||
1737 | status = sbus_readb(&bp->r[chip]->r[CD180_MSVR]); | ||
1738 | result = 0/*bp->r[chip]->r[AURORA_RI] & (1u << port_No(port)) ? 0 : TIOCM_RNG*/; | ||
1739 | |||
1740 | restore_flags(flags); | ||
1741 | |||
1742 | result |= ((status & bp->RTS) ? TIOCM_RTS : 0) | ||
1743 | | ((status & bp->DTR) ? TIOCM_DTR : 0) | ||
1744 | | ((status & MSVR_CD) ? TIOCM_CAR : 0) | ||
1745 | | ((status & MSVR_DSR) ? TIOCM_DSR : 0) | ||
1746 | | ((status & MSVR_CTS) ? TIOCM_CTS : 0); | ||
1747 | |||
1748 | #ifdef AURORA_DEBUG | ||
1749 | printk("aurora_get_modem_info: end\n"); | ||
1750 | #endif | ||
1751 | return result; | ||
1752 | } | ||
1753 | |||
1754 | static int aurora_tiocmset(struct tty_struct *tty, struct file *file, | ||
1755 | unsigned int set, unsigned int clear) | ||
1756 | { | ||
1757 | struct Aurora_port *port = (struct Aurora_port *) tty->driver_data; | ||
1758 | unsigned int arg; | ||
1759 | unsigned long flags; | ||
1760 | struct Aurora_board *bp = port_Board(port); | ||
1761 | unsigned char chip; | ||
1762 | |||
1763 | #ifdef AURORA_DEBUG | ||
1764 | printk("aurora_set_modem_info: start\n"); | ||
1765 | #endif | ||
1766 | if ((aurora_paranoia_check(port, tty->name, __FUNCTION__)) | ||
1767 | return -ENODEV; | ||
1768 | |||
1769 | chip = AURORA_CD180(port_No(port)); | ||
1770 | |||
1771 | save_flags(flags); cli(); | ||
1772 | if (set & TIOCM_RTS) | ||
1773 | port->MSVR |= bp->RTS; | ||
1774 | if (set & TIOCM_DTR) | ||
1775 | port->MSVR |= bp->DTR; | ||
1776 | if (clear & TIOCM_RTS) | ||
1777 | port->MSVR &= ~bp->RTS; | ||
1778 | if (clear & TIOCM_DTR) | ||
1779 | port->MSVR &= ~bp->DTR; | ||
1780 | |||
1781 | sbus_writeb(port_No(port) & 7, &bp->r[chip]->r[CD180_CAR]); | ||
1782 | udelay(1); | ||
1783 | |||
1784 | sbus_writeb(port->MSVR, &bp->r[chip]->r[CD180_MSVR]); | ||
1785 | |||
1786 | restore_flags(flags); | ||
1787 | #ifdef AURORA_DEBUG | ||
1788 | printk("aurora_set_modem_info: end\n"); | ||
1789 | #endif | ||
1790 | return 0; | ||
1791 | } | ||
1792 | |||
1793 | static void aurora_send_break(struct Aurora_port * port, unsigned long length) | ||
1794 | { | ||
1795 | struct Aurora_board *bp = port_Board(port); | ||
1796 | unsigned long flags; | ||
1797 | unsigned char chip; | ||
1798 | |||
1799 | #ifdef AURORA_DEBUG | ||
1800 | printk("aurora_send_break: start\n"); | ||
1801 | #endif | ||
1802 | chip = AURORA_CD180(port_No(port)); | ||
1803 | |||
1804 | save_flags(flags); cli(); | ||
1805 | |||
1806 | port->break_length = AURORA_TPS / HZ * length; | ||
1807 | port->COR2 |= COR2_ETC; | ||
1808 | port->SRER |= SRER_TXRDY; | ||
1809 | sbus_writeb(port_No(port) & 7, &bp->r[chip]->r[CD180_CAR]); | ||
1810 | udelay(1); | ||
1811 | |||
1812 | sbus_writeb(port->COR2, &bp->r[chip]->r[CD180_COR2]); | ||
1813 | sbus_writeb(port->SRER, &bp->r[chip]->r[CD180_SRER]); | ||
1814 | aurora_wait_CCR(bp->r[chip]); | ||
1815 | |||
1816 | sbus_writeb(CCR_CORCHG2, &bp->r[chip]->r[CD180_CCR]); | ||
1817 | aurora_wait_CCR(bp->r[chip]); | ||
1818 | |||
1819 | restore_flags(flags); | ||
1820 | #ifdef AURORA_DEBUG | ||
1821 | printk("aurora_send_break: end\n"); | ||
1822 | #endif | ||
1823 | } | ||
1824 | |||
1825 | static int aurora_set_serial_info(struct Aurora_port * port, | ||
1826 | struct serial_struct * newinfo) | ||
1827 | { | ||
1828 | struct serial_struct tmp; | ||
1829 | struct Aurora_board *bp = port_Board(port); | ||
1830 | int change_speed; | ||
1831 | unsigned long flags; | ||
1832 | |||
1833 | #ifdef AURORA_DEBUG | ||
1834 | printk("aurora_set_serial_info: start\n"); | ||
1835 | #endif | ||
1836 | if (copy_from_user(&tmp, newinfo, sizeof(tmp))) | ||
1837 | return -EFAULT; | ||
1838 | #if 0 | ||
1839 | if ((tmp.irq != bp->irq) || | ||
1840 | (tmp.port != bp->base) || | ||
1841 | (tmp.type != PORT_CIRRUS) || | ||
1842 | (tmp.baud_base != (bp->oscfreq + CD180_TPC/2) / CD180_TPC) || | ||
1843 | (tmp.custom_divisor != 0) || | ||
1844 | (tmp.xmit_fifo_size != CD180_NFIFO) || | ||
1845 | (tmp.flags & ~AURORA_LEGAL_FLAGS)) | ||
1846 | return -EINVAL; | ||
1847 | #endif | ||
1848 | |||
1849 | change_speed = ((port->flags & ASYNC_SPD_MASK) != | ||
1850 | (tmp.flags & ASYNC_SPD_MASK)); | ||
1851 | |||
1852 | if (!capable(CAP_SYS_ADMIN)) { | ||
1853 | if ((tmp.close_delay != port->close_delay) || | ||
1854 | (tmp.closing_wait != port->closing_wait) || | ||
1855 | ((tmp.flags & ~ASYNC_USR_MASK) != | ||
1856 | (port->flags & ~ASYNC_USR_MASK))) | ||
1857 | return -EPERM; | ||
1858 | port->flags = ((port->flags & ~ASYNC_USR_MASK) | | ||
1859 | (tmp.flags & ASYNC_USR_MASK)); | ||
1860 | } else { | ||
1861 | port->flags = ((port->flags & ~ASYNC_FLAGS) | | ||
1862 | (tmp.flags & ASYNC_FLAGS)); | ||
1863 | port->close_delay = tmp.close_delay; | ||
1864 | port->closing_wait = tmp.closing_wait; | ||
1865 | } | ||
1866 | if (change_speed) { | ||
1867 | save_flags(flags); cli(); | ||
1868 | aurora_change_speed(bp, port); | ||
1869 | restore_flags(flags); | ||
1870 | } | ||
1871 | #ifdef AURORA_DEBUG | ||
1872 | printk("aurora_set_serial_info: end\n"); | ||
1873 | #endif | ||
1874 | return 0; | ||
1875 | } | ||
1876 | |||
1877 | extern int aurora_get_serial_info(struct Aurora_port * port, | ||
1878 | struct serial_struct * retinfo) | ||
1879 | { | ||
1880 | struct serial_struct tmp; | ||
1881 | struct Aurora_board *bp = port_Board(port); | ||
1882 | |||
1883 | #ifdef AURORA_DEBUG | ||
1884 | printk("aurora_get_serial_info: start\n"); | ||
1885 | #endif | ||
1886 | if (!access_ok(VERIFY_WRITE, (void *) retinfo, sizeof(tmp))) | ||
1887 | return -EFAULT; | ||
1888 | |||
1889 | memset(&tmp, 0, sizeof(tmp)); | ||
1890 | tmp.type = PORT_CIRRUS; | ||
1891 | tmp.line = port - aurora_port; | ||
1892 | tmp.port = 0; | ||
1893 | tmp.irq = bp->irq; | ||
1894 | tmp.flags = port->flags; | ||
1895 | tmp.baud_base = (bp->oscfreq + CD180_TPC/2) / CD180_TPC; | ||
1896 | tmp.close_delay = port->close_delay * HZ/100; | ||
1897 | tmp.closing_wait = port->closing_wait * HZ/100; | ||
1898 | tmp.xmit_fifo_size = CD180_NFIFO; | ||
1899 | copy_to_user(retinfo, &tmp, sizeof(tmp)); | ||
1900 | #ifdef AURORA_DEBUG | ||
1901 | printk("aurora_get_serial_info: end\n"); | ||
1902 | #endif | ||
1903 | return 0; | ||
1904 | } | ||
1905 | |||
1906 | static int aurora_ioctl(struct tty_struct * tty, struct file * filp, | ||
1907 | unsigned int cmd, unsigned long arg) | ||
1908 | |||
1909 | { | ||
1910 | struct Aurora_port *port = (struct Aurora_port *) tty->driver_data; | ||
1911 | int retval; | ||
1912 | |||
1913 | #ifdef AURORA_DEBUG | ||
1914 | printk("aurora_ioctl: start\n"); | ||
1915 | #endif | ||
1916 | if ((aurora_paranoia_check(port, tty->name, "aurora_ioctl")) | ||
1917 | return -ENODEV; | ||
1918 | |||
1919 | switch (cmd) { | ||
1920 | case TCSBRK: /* SVID version: non-zero arg --> no break */ | ||
1921 | retval = tty_check_change(tty); | ||
1922 | if (retval) | ||
1923 | return retval; | ||
1924 | tty_wait_until_sent(tty, 0); | ||
1925 | if (!arg) | ||
1926 | aurora_send_break(port, HZ/4); /* 1/4 second */ | ||
1927 | return 0; | ||
1928 | case TCSBRKP: /* support for POSIX tcsendbreak() */ | ||
1929 | retval = tty_check_change(tty); | ||
1930 | if (retval) | ||
1931 | return retval; | ||
1932 | tty_wait_until_sent(tty, 0); | ||
1933 | aurora_send_break(port, arg ? arg*(HZ/10) : HZ/4); | ||
1934 | return 0; | ||
1935 | case TIOCGSOFTCAR: | ||
1936 | return put_user(C_CLOCAL(tty) ? 1 : 0, (unsigned long *)arg); | ||
1937 | case TIOCSSOFTCAR: | ||
1938 | if (get_user(arg,(unsigned long *)arg)) | ||
1939 | return -EFAULT; | ||
1940 | tty->termios->c_cflag = | ||
1941 | ((tty->termios->c_cflag & ~CLOCAL) | | ||
1942 | (arg ? CLOCAL : 0)); | ||
1943 | return 0; | ||
1944 | case TIOCGSERIAL: | ||
1945 | return aurora_get_serial_info(port, (struct serial_struct *) arg); | ||
1946 | case TIOCSSERIAL: | ||
1947 | return aurora_set_serial_info(port, (struct serial_struct *) arg); | ||
1948 | default: | ||
1949 | return -ENOIOCTLCMD; | ||
1950 | }; | ||
1951 | #ifdef AURORA_DEBUG | ||
1952 | printk("aurora_ioctl: end\n"); | ||
1953 | #endif | ||
1954 | return 0; | ||
1955 | } | ||
1956 | |||
1957 | static void aurora_throttle(struct tty_struct * tty) | ||
1958 | { | ||
1959 | struct Aurora_port *port = (struct Aurora_port *) tty->driver_data; | ||
1960 | struct Aurora_board *bp; | ||
1961 | unsigned long flags; | ||
1962 | unsigned char chip; | ||
1963 | |||
1964 | #ifdef AURORA_DEBUG | ||
1965 | printk("aurora_throttle: start\n"); | ||
1966 | #endif | ||
1967 | if ((aurora_paranoia_check(port, tty->name, "aurora_throttle")) | ||
1968 | return; | ||
1969 | |||
1970 | bp = port_Board(port); | ||
1971 | chip = AURORA_CD180(port_No(port)); | ||
1972 | |||
1973 | save_flags(flags); cli(); | ||
1974 | port->MSVR &= ~bp->RTS; | ||
1975 | sbus_writeb(port_No(port) & 7, &bp->r[chip]->r[CD180_CAR]); | ||
1976 | udelay(1); | ||
1977 | if (I_IXOFF(tty)) { | ||
1978 | aurora_wait_CCR(bp->r[chip]); | ||
1979 | sbus_writeb(CCR_SSCH2, &bp->r[chip]->r[CD180_CCR]); | ||
1980 | aurora_wait_CCR(bp->r[chip]); | ||
1981 | } | ||
1982 | sbus_writeb(port->MSVR, &bp->r[chip]->r[CD180_MSVR]); | ||
1983 | restore_flags(flags); | ||
1984 | #ifdef AURORA_DEBUG | ||
1985 | printk("aurora_throttle: end\n"); | ||
1986 | #endif | ||
1987 | } | ||
1988 | |||
1989 | static void aurora_unthrottle(struct tty_struct * tty) | ||
1990 | { | ||
1991 | struct Aurora_port *port = (struct Aurora_port *) tty->driver_data; | ||
1992 | struct Aurora_board *bp; | ||
1993 | unsigned long flags; | ||
1994 | unsigned char chip; | ||
1995 | |||
1996 | #ifdef AURORA_DEBUG | ||
1997 | printk("aurora_unthrottle: start\n"); | ||
1998 | #endif | ||
1999 | if ((aurora_paranoia_check(port, tty->name, "aurora_unthrottle")) | ||
2000 | return; | ||
2001 | |||
2002 | bp = port_Board(port); | ||
2003 | |||
2004 | chip = AURORA_CD180(port_No(port)); | ||
2005 | |||
2006 | save_flags(flags); cli(); | ||
2007 | port->MSVR |= bp->RTS; | ||
2008 | sbus_writeb(port_No(port) & 7, | ||
2009 | &bp->r[chip]->r[CD180_CAR]); | ||
2010 | udelay(1); | ||
2011 | if (I_IXOFF(tty)) { | ||
2012 | aurora_wait_CCR(bp->r[chip]); | ||
2013 | sbus_writeb(CCR_SSCH1, | ||
2014 | &bp->r[chip]->r[CD180_CCR]); | ||
2015 | aurora_wait_CCR(bp->r[chip]); | ||
2016 | } | ||
2017 | sbus_writeb(port->MSVR, &bp->r[chip]->r[CD180_MSVR]); | ||
2018 | restore_flags(flags); | ||
2019 | #ifdef AURORA_DEBUG | ||
2020 | printk("aurora_unthrottle: end\n"); | ||
2021 | #endif | ||
2022 | } | ||
2023 | |||
2024 | static void aurora_stop(struct tty_struct * tty) | ||
2025 | { | ||
2026 | struct Aurora_port *port = (struct Aurora_port *) tty->driver_data; | ||
2027 | struct Aurora_board *bp; | ||
2028 | unsigned long flags; | ||
2029 | unsigned char chip; | ||
2030 | |||
2031 | #ifdef AURORA_DEBUG | ||
2032 | printk("aurora_stop: start\n"); | ||
2033 | #endif | ||
2034 | if ((aurora_paranoia_check(port, tty->name, "aurora_stop")) | ||
2035 | return; | ||
2036 | |||
2037 | bp = port_Board(port); | ||
2038 | |||
2039 | chip = AURORA_CD180(port_No(port)); | ||
2040 | |||
2041 | save_flags(flags); cli(); | ||
2042 | port->SRER &= ~SRER_TXRDY; | ||
2043 | sbus_writeb(port_No(port) & 7, | ||
2044 | &bp->r[chip]->r[CD180_CAR]); | ||
2045 | udelay(1); | ||
2046 | sbus_writeb(port->SRER, | ||
2047 | &bp->r[chip]->r[CD180_SRER]); | ||
2048 | restore_flags(flags); | ||
2049 | #ifdef AURORA_DEBUG | ||
2050 | printk("aurora_stop: end\n"); | ||
2051 | #endif | ||
2052 | } | ||
2053 | |||
2054 | static void aurora_start(struct tty_struct * tty) | ||
2055 | { | ||
2056 | struct Aurora_port *port = (struct Aurora_port *) tty->driver_data; | ||
2057 | struct Aurora_board *bp; | ||
2058 | unsigned long flags; | ||
2059 | unsigned char chip; | ||
2060 | |||
2061 | #ifdef AURORA_DEBUG | ||
2062 | printk("aurora_start: start\n"); | ||
2063 | #endif | ||
2064 | if ((aurora_paranoia_check(port, tty->name, "aurora_start")) | ||
2065 | return; | ||
2066 | |||
2067 | bp = port_Board(port); | ||
2068 | |||
2069 | chip = AURORA_CD180(port_No(port)); | ||
2070 | |||
2071 | save_flags(flags); cli(); | ||
2072 | if (port->xmit_cnt && port->xmit_buf && !(port->SRER & SRER_TXRDY)) { | ||
2073 | port->SRER |= SRER_TXRDY; | ||
2074 | sbus_writeb(port_No(port) & 7, | ||
2075 | &bp->r[chip]->r[CD180_CAR]); | ||
2076 | udelay(1); | ||
2077 | sbus_writeb(port->SRER, | ||
2078 | &bp->r[chip]->r[CD180_SRER]); | ||
2079 | } | ||
2080 | restore_flags(flags); | ||
2081 | #ifdef AURORA_DEBUG | ||
2082 | printk("aurora_start: end\n"); | ||
2083 | #endif | ||
2084 | } | ||
2085 | |||
2086 | /* | ||
2087 | * This routine is called from the scheduler tqueue when the interrupt | ||
2088 | * routine has signalled that a hangup has occurred. The path of | ||
2089 | * hangup processing is: | ||
2090 | * | ||
2091 | * serial interrupt routine -> (scheduler tqueue) -> | ||
2092 | * do_aurora_hangup() -> tty->hangup() -> aurora_hangup() | ||
2093 | * | ||
2094 | */ | ||
2095 | static void do_aurora_hangup(void *private_) | ||
2096 | { | ||
2097 | struct Aurora_port *port = (struct Aurora_port *) private_; | ||
2098 | struct tty_struct *tty; | ||
2099 | |||
2100 | #ifdef AURORA_DEBUG | ||
2101 | printk("do_aurora_hangup: start\n"); | ||
2102 | #endif | ||
2103 | tty = port->tty; | ||
2104 | if (tty != NULL) { | ||
2105 | tty_hangup(tty); /* FIXME: module removal race - AKPM */ | ||
2106 | #ifdef AURORA_DEBUG | ||
2107 | printk("do_aurora_hangup: end\n"); | ||
2108 | #endif | ||
2109 | } | ||
2110 | } | ||
2111 | |||
2112 | static void aurora_hangup(struct tty_struct * tty) | ||
2113 | { | ||
2114 | struct Aurora_port *port = (struct Aurora_port *) tty->driver_data; | ||
2115 | struct Aurora_board *bp; | ||
2116 | |||
2117 | #ifdef AURORA_DEBUG | ||
2118 | printk("aurora_hangup: start\n"); | ||
2119 | #endif | ||
2120 | if ((aurora_paranoia_check(port, tty->name, "aurora_hangup")) | ||
2121 | return; | ||
2122 | |||
2123 | bp = port_Board(port); | ||
2124 | |||
2125 | aurora_shutdown_port(bp, port); | ||
2126 | port->event = 0; | ||
2127 | port->count = 0; | ||
2128 | port->flags &= ~ASYNC_NORMAL_ACTIVE; | ||
2129 | port->tty = 0; | ||
2130 | wake_up_interruptible(&port->open_wait); | ||
2131 | #ifdef AURORA_DEBUG | ||
2132 | printk("aurora_hangup: end\n"); | ||
2133 | #endif | ||
2134 | } | ||
2135 | |||
2136 | static void aurora_set_termios(struct tty_struct * tty, struct termios * old_termios) | ||
2137 | { | ||
2138 | struct Aurora_port *port = (struct Aurora_port *) tty->driver_data; | ||
2139 | unsigned long flags; | ||
2140 | |||
2141 | #ifdef AURORA_DEBUG | ||
2142 | printk("aurora_set_termios: start\n"); | ||
2143 | #endif | ||
2144 | if ((aurora_paranoia_check(port, tty->name, "aurora_set_termios")) | ||
2145 | return; | ||
2146 | |||
2147 | if (tty->termios->c_cflag == old_termios->c_cflag && | ||
2148 | tty->termios->c_iflag == old_termios->c_iflag) | ||
2149 | return; | ||
2150 | |||
2151 | save_flags(flags); cli(); | ||
2152 | aurora_change_speed(port_Board(port), port); | ||
2153 | restore_flags(flags); | ||
2154 | |||
2155 | if ((old_termios->c_cflag & CRTSCTS) && | ||
2156 | !(tty->termios->c_cflag & CRTSCTS)) { | ||
2157 | tty->hw_stopped = 0; | ||
2158 | aurora_start(tty); | ||
2159 | } | ||
2160 | #ifdef AURORA_DEBUG | ||
2161 | printk("aurora_set_termios: end\n"); | ||
2162 | #endif | ||
2163 | } | ||
2164 | |||
2165 | static void do_aurora_bh(void) | ||
2166 | { | ||
2167 | run_task_queue(&tq_aurora); | ||
2168 | } | ||
2169 | |||
2170 | static void do_softint(void *private_) | ||
2171 | { | ||
2172 | struct Aurora_port *port = (struct Aurora_port *) private_; | ||
2173 | struct tty_struct *tty; | ||
2174 | |||
2175 | #ifdef AURORA_DEBUG | ||
2176 | printk("do_softint: start\n"); | ||
2177 | #endif | ||
2178 | tty = port->tty; | ||
2179 | if (tty == NULL) | ||
2180 | return; | ||
2181 | |||
2182 | if (test_and_clear_bit(RS_EVENT_WRITE_WAKEUP, &port->event)) { | ||
2183 | tty_wakeup(tty); | ||
2184 | } | ||
2185 | #ifdef AURORA_DEBUG | ||
2186 | printk("do_softint: end\n"); | ||
2187 | #endif | ||
2188 | } | ||
2189 | |||
2190 | static const struct tty_operations aurora_ops = { | ||
2191 | .open = aurora_open, | ||
2192 | .close = aurora_close, | ||
2193 | .write = aurora_write, | ||
2194 | .put_char = aurora_put_char, | ||
2195 | .flush_chars = aurora_flush_chars, | ||
2196 | .write_room = aurora_write_room, | ||
2197 | .chars_in_buffer = aurora_chars_in_buffer, | ||
2198 | .flush_buffer = aurora_flush_buffer, | ||
2199 | .ioctl = aurora_ioctl, | ||
2200 | .throttle = aurora_throttle, | ||
2201 | .unthrottle = aurora_unthrottle, | ||
2202 | .set_termios = aurora_set_termios, | ||
2203 | .stop = aurora_stop, | ||
2204 | .start = aurora_start, | ||
2205 | .hangup = aurora_hangup, | ||
2206 | .tiocmget = aurora_tiocmget, | ||
2207 | .tiocmset = aurora_tiocmset, | ||
2208 | }; | ||
2209 | |||
2210 | static int aurora_init_drivers(void) | ||
2211 | { | ||
2212 | int error; | ||
2213 | int i; | ||
2214 | |||
2215 | #ifdef AURORA_DEBUG | ||
2216 | printk("aurora_init_drivers: start\n"); | ||
2217 | #endif | ||
2218 | tmp_buf = (unsigned char *) get_zeroed_page(GFP_KERNEL); | ||
2219 | if (tmp_buf == NULL) { | ||
2220 | printk(KERN_ERR "aurora: Couldn't get free page.\n"); | ||
2221 | return 1; | ||
2222 | } | ||
2223 | init_bh(AURORA_BH, do_aurora_bh); | ||
2224 | aurora_driver = alloc_tty_driver(AURORA_INPORTS); | ||
2225 | if (!aurora_driver) { | ||
2226 | printk(KERN_ERR "aurora: Couldn't allocate tty driver.\n"); | ||
2227 | free_page((unsigned long) tmp_buf); | ||
2228 | return 1; | ||
2229 | } | ||
2230 | aurora_driver->owner = THIS_MODULE; | ||
2231 | aurora_driver->name = "ttyA"; | ||
2232 | aurora_driver->major = AURORA_MAJOR; | ||
2233 | aurora_driver->type = TTY_DRIVER_TYPE_SERIAL; | ||
2234 | aurora_driver->subtype = SERIAL_TYPE_NORMAL; | ||
2235 | aurora_driver->init_termios = tty_std_termios; | ||
2236 | aurora_driver->init_termios.c_cflag = | ||
2237 | B9600 | CS8 | CREAD | HUPCL | CLOCAL; | ||
2238 | aurora_driver->flags = TTY_DRIVER_REAL_RAW; | ||
2239 | tty_set_operations(aurora_driver, &aurora_ops); | ||
2240 | error = tty_register_driver(aurora_driver); | ||
2241 | if (error) { | ||
2242 | put_tty_driver(aurora_driver); | ||
2243 | free_page((unsigned long) tmp_buf); | ||
2244 | printk(KERN_ERR "aurora: Couldn't register aurora driver, error = %d\n", | ||
2245 | error); | ||
2246 | return 1; | ||
2247 | } | ||
2248 | |||
2249 | memset(aurora_port, 0, sizeof(aurora_port)); | ||
2250 | for (i = 0; i < AURORA_TNPORTS; i++) { | ||
2251 | aurora_port[i].magic = AURORA_MAGIC; | ||
2252 | aurora_port[i].tqueue.routine = do_softint; | ||
2253 | aurora_port[i].tqueue.data = &aurora_port[i]; | ||
2254 | aurora_port[i].tqueue_hangup.routine = do_aurora_hangup; | ||
2255 | aurora_port[i].tqueue_hangup.data = &aurora_port[i]; | ||
2256 | aurora_port[i].close_delay = 50 * HZ/100; | ||
2257 | aurora_port[i].closing_wait = 3000 * HZ/100; | ||
2258 | init_waitqueue_head(&aurora_port[i].open_wait); | ||
2259 | init_waitqueue_head(&aurora_port[i].close_wait); | ||
2260 | } | ||
2261 | #ifdef AURORA_DEBUG | ||
2262 | printk("aurora_init_drivers: end\n"); | ||
2263 | #endif | ||
2264 | return 0; | ||
2265 | } | ||
2266 | |||
2267 | static void aurora_release_drivers(void) | ||
2268 | { | ||
2269 | #ifdef AURORA_DEBUG | ||
2270 | printk("aurora_release_drivers: start\n"); | ||
2271 | #endif | ||
2272 | free_page((unsigned long)tmp_buf); | ||
2273 | tty_unregister_driver(aurora_driver); | ||
2274 | put_tty_driver(aurora_driver); | ||
2275 | #ifdef AURORA_DEBUG | ||
2276 | printk("aurora_release_drivers: end\n"); | ||
2277 | #endif | ||
2278 | } | ||
2279 | |||
2280 | /* | ||
2281 | * Called at boot time. | ||
2282 | * | ||
2283 | * You can specify IO base for up to RC_NBOARD cards, | ||
2284 | * using line "riscom8=0xiobase1,0xiobase2,.." at LILO prompt. | ||
2285 | * Note that there will be no probing at default | ||
2286 | * addresses in this case. | ||
2287 | * | ||
2288 | */ | ||
2289 | void __init aurora_setup(char *str, int *ints) | ||
2290 | { | ||
2291 | int i; | ||
2292 | |||
2293 | for(i=0;(i<ints[0])&&(i<4);i++) { | ||
2294 | if (ints[i+1]) irqs[i]=ints[i+1]; | ||
2295 | } | ||
2296 | } | ||
2297 | |||
2298 | static int __init aurora_real_init(void) | ||
2299 | { | ||
2300 | int found; | ||
2301 | int i; | ||
2302 | |||
2303 | printk(KERN_INFO "aurora: Driver starting.\n"); | ||
2304 | if(aurora_init_drivers()) | ||
2305 | return -EIO; | ||
2306 | found = aurora_probe(); | ||
2307 | if(!found) { | ||
2308 | aurora_release_drivers(); | ||
2309 | printk(KERN_INFO "aurora: No Aurora Multiport boards detected.\n"); | ||
2310 | return -EIO; | ||
2311 | } else { | ||
2312 | printk(KERN_INFO "aurora: %d boards found.\n", found); | ||
2313 | } | ||
2314 | for (i = 0; i < found; i++) { | ||
2315 | int ret = aurora_setup_board(&aurora_board[i]); | ||
2316 | |||
2317 | if (ret) { | ||
2318 | #ifdef AURORA_DEBUG | ||
2319 | printk(KERN_ERR "aurora_init: error aurora_setup_board ret %d\n", | ||
2320 | ret); | ||
2321 | #endif | ||
2322 | return ret; | ||
2323 | } | ||
2324 | } | ||
2325 | return 0; | ||
2326 | } | ||
2327 | |||
2328 | int irq = 0; | ||
2329 | int irq1 = 0; | ||
2330 | int irq2 = 0; | ||
2331 | int irq3 = 0; | ||
2332 | module_param(irq , int, 0); | ||
2333 | module_param(irq1, int, 0); | ||
2334 | module_param(irq2, int, 0); | ||
2335 | module_param(irq3, int, 0); | ||
2336 | |||
2337 | static int __init aurora_init(void) | ||
2338 | { | ||
2339 | if (irq ) irqs[0]=irq ; | ||
2340 | if (irq1) irqs[1]=irq1; | ||
2341 | if (irq2) irqs[2]=irq2; | ||
2342 | if (irq3) irqs[3]=irq3; | ||
2343 | return aurora_real_init(); | ||
2344 | } | ||
2345 | |||
2346 | static void __exit aurora_cleanup(void) | ||
2347 | { | ||
2348 | int i; | ||
2349 | |||
2350 | #ifdef AURORA_DEBUG | ||
2351 | printk("cleanup_module: aurora_release_drivers\n"); | ||
2352 | #endif | ||
2353 | |||
2354 | aurora_release_drivers(); | ||
2355 | for (i = 0; i < AURORA_NBOARD; i++) | ||
2356 | if (aurora_board[i].flags & AURORA_BOARD_PRESENT) { | ||
2357 | aurora_shutdown_board(&aurora_board[i]); | ||
2358 | aurora_release_io_range(&aurora_board[i]); | ||
2359 | } | ||
2360 | } | ||
2361 | |||
2362 | module_init(aurora_init); | ||
2363 | module_exit(aurora_cleanup); | ||
2364 | MODULE_LICENSE("GPL"); | ||