diff options
Diffstat (limited to 'drivers/regulator')
-rw-r--r-- | drivers/regulator/Kconfig | 7 | ||||
-rw-r--r-- | drivers/regulator/Makefile | 1 | ||||
-rw-r--r-- | drivers/regulator/pcf50633-regulator.c | 329 |
3 files changed, 337 insertions, 0 deletions
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 39360e2a4540..e7e0cf102d6d 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig | |||
@@ -73,4 +73,11 @@ config REGULATOR_DA903X | |||
73 | Say y here to support the BUCKs and LDOs regulators found on | 73 | Say y here to support the BUCKs and LDOs regulators found on |
74 | Dialog Semiconductor DA9030/DA9034 PMIC. | 74 | Dialog Semiconductor DA9030/DA9034 PMIC. |
75 | 75 | ||
76 | config REGULATOR_PCF50633 | ||
77 | tristate "PCF50633 regulator driver" | ||
78 | depends on MFD_PCF50633 | ||
79 | help | ||
80 | Say Y here to support the voltage regulators and convertors | ||
81 | on PCF50633 | ||
82 | |||
76 | endif | 83 | endif |
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 254d40c02ee8..61b30c6ddecc 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile | |||
@@ -11,5 +11,6 @@ obj-$(CONFIG_REGULATOR_BQ24022) += bq24022.o | |||
11 | obj-$(CONFIG_REGULATOR_WM8350) += wm8350-regulator.o | 11 | obj-$(CONFIG_REGULATOR_WM8350) += wm8350-regulator.o |
12 | obj-$(CONFIG_REGULATOR_WM8400) += wm8400-regulator.o | 12 | obj-$(CONFIG_REGULATOR_WM8400) += wm8400-regulator.o |
13 | obj-$(CONFIG_REGULATOR_DA903X) += da903x.o | 13 | obj-$(CONFIG_REGULATOR_DA903X) += da903x.o |
14 | obj-$(CONFIG_REGULATOR_PCF50633) += pcf50633-regulator.o | ||
14 | 15 | ||
15 | ccflags-$(CONFIG_REGULATOR_DEBUG) += -DDEBUG | 16 | ccflags-$(CONFIG_REGULATOR_DEBUG) += -DDEBUG |
diff --git a/drivers/regulator/pcf50633-regulator.c b/drivers/regulator/pcf50633-regulator.c new file mode 100644 index 000000000000..4cc85ec6e120 --- /dev/null +++ b/drivers/regulator/pcf50633-regulator.c | |||
@@ -0,0 +1,329 @@ | |||
1 | /* NXP PCF50633 PMIC Driver | ||
2 | * | ||
3 | * (C) 2006-2008 by Openmoko, Inc. | ||
4 | * Author: Balaji Rao <balajirrao@openmoko.org> | ||
5 | * All rights reserved. | ||
6 | * | ||
7 | * Broken down from monstrous PCF50633 driver mainly by | ||
8 | * Harald Welte and Andy Green and Werner Almesberger | ||
9 | * | ||
10 | * This program is free software; you can redistribute it and/or modify it | ||
11 | * under the terms of the GNU General Public License as published by the | ||
12 | * Free Software Foundation; either version 2 of the License, or (at your | ||
13 | * option) any later version. | ||
14 | * | ||
15 | */ | ||
16 | |||
17 | #include <linux/kernel.h> | ||
18 | #include <linux/module.h> | ||
19 | #include <linux/init.h> | ||
20 | #include <linux/device.h> | ||
21 | #include <linux/err.h> | ||
22 | #include <linux/platform_device.h> | ||
23 | |||
24 | #include <linux/mfd/pcf50633/core.h> | ||
25 | #include <linux/mfd/pcf50633/pmic.h> | ||
26 | |||
27 | #define PCF50633_REGULATOR(_name, _id) \ | ||
28 | { \ | ||
29 | .name = _name, \ | ||
30 | .id = _id, \ | ||
31 | .ops = &pcf50633_regulator_ops, \ | ||
32 | .type = REGULATOR_VOLTAGE, \ | ||
33 | .owner = THIS_MODULE, \ | ||
34 | } | ||
35 | |||
36 | static const u8 pcf50633_regulator_registers[PCF50633_NUM_REGULATORS] = { | ||
37 | [PCF50633_REGULATOR_AUTO] = PCF50633_REG_AUTOOUT, | ||
38 | [PCF50633_REGULATOR_DOWN1] = PCF50633_REG_DOWN1OUT, | ||
39 | [PCF50633_REGULATOR_DOWN2] = PCF50633_REG_DOWN2OUT, | ||
40 | [PCF50633_REGULATOR_MEMLDO] = PCF50633_REG_MEMLDOOUT, | ||
41 | [PCF50633_REGULATOR_LDO1] = PCF50633_REG_LDO1OUT, | ||
42 | [PCF50633_REGULATOR_LDO2] = PCF50633_REG_LDO2OUT, | ||
43 | [PCF50633_REGULATOR_LDO3] = PCF50633_REG_LDO3OUT, | ||
44 | [PCF50633_REGULATOR_LDO4] = PCF50633_REG_LDO4OUT, | ||
45 | [PCF50633_REGULATOR_LDO5] = PCF50633_REG_LDO5OUT, | ||
46 | [PCF50633_REGULATOR_LDO6] = PCF50633_REG_LDO6OUT, | ||
47 | [PCF50633_REGULATOR_HCLDO] = PCF50633_REG_HCLDOOUT, | ||
48 | }; | ||
49 | |||
50 | /* Bits from voltage value */ | ||
51 | static u8 auto_voltage_bits(unsigned int millivolts) | ||
52 | { | ||
53 | if (millivolts < 1800) | ||
54 | return 0; | ||
55 | if (millivolts > 3800) | ||
56 | return 0xff; | ||
57 | |||
58 | millivolts -= 625; | ||
59 | |||
60 | return millivolts / 25; | ||
61 | } | ||
62 | |||
63 | static u8 down_voltage_bits(unsigned int millivolts) | ||
64 | { | ||
65 | if (millivolts < 625) | ||
66 | return 0; | ||
67 | else if (millivolts > 3000) | ||
68 | return 0xff; | ||
69 | |||
70 | millivolts -= 625; | ||
71 | |||
72 | return millivolts / 25; | ||
73 | } | ||
74 | |||
75 | static u8 ldo_voltage_bits(unsigned int millivolts) | ||
76 | { | ||
77 | if (millivolts < 900) | ||
78 | return 0; | ||
79 | else if (millivolts > 3600) | ||
80 | return 0x1f; | ||
81 | |||
82 | millivolts -= 900; | ||
83 | return millivolts / 100; | ||
84 | } | ||
85 | |||
86 | /* Obtain voltage value from bits */ | ||
87 | static unsigned int auto_voltage_value(u8 bits) | ||
88 | { | ||
89 | if (bits < 0x2f) | ||
90 | return 0; | ||
91 | |||
92 | return 625 + (bits * 25); | ||
93 | } | ||
94 | |||
95 | |||
96 | static unsigned int down_voltage_value(u8 bits) | ||
97 | { | ||
98 | return 625 + (bits * 25); | ||
99 | } | ||
100 | |||
101 | |||
102 | static unsigned int ldo_voltage_value(u8 bits) | ||
103 | { | ||
104 | bits &= 0x1f; | ||
105 | |||
106 | return 900 + (bits * 100); | ||
107 | } | ||
108 | |||
109 | static int pcf50633_regulator_set_voltage(struct regulator_dev *rdev, | ||
110 | int min_uV, int max_uV) | ||
111 | { | ||
112 | struct pcf50633 *pcf; | ||
113 | int regulator_id, millivolts; | ||
114 | u8 volt_bits, regnr; | ||
115 | |||
116 | pcf = rdev_get_drvdata(rdev); | ||
117 | |||
118 | regulator_id = rdev_get_id(rdev); | ||
119 | if (regulator_id >= PCF50633_NUM_REGULATORS) | ||
120 | return -EINVAL; | ||
121 | |||
122 | millivolts = min_uV / 1000; | ||
123 | |||
124 | regnr = pcf50633_regulator_registers[regulator_id]; | ||
125 | |||
126 | switch (regulator_id) { | ||
127 | case PCF50633_REGULATOR_AUTO: | ||
128 | volt_bits = auto_voltage_bits(millivolts); | ||
129 | break; | ||
130 | case PCF50633_REGULATOR_DOWN1: | ||
131 | volt_bits = down_voltage_bits(millivolts); | ||
132 | break; | ||
133 | case PCF50633_REGULATOR_DOWN2: | ||
134 | volt_bits = down_voltage_bits(millivolts); | ||
135 | break; | ||
136 | case PCF50633_REGULATOR_LDO1: | ||
137 | case PCF50633_REGULATOR_LDO2: | ||
138 | case PCF50633_REGULATOR_LDO3: | ||
139 | case PCF50633_REGULATOR_LDO4: | ||
140 | case PCF50633_REGULATOR_LDO5: | ||
141 | case PCF50633_REGULATOR_LDO6: | ||
142 | case PCF50633_REGULATOR_HCLDO: | ||
143 | volt_bits = ldo_voltage_bits(millivolts); | ||
144 | break; | ||
145 | default: | ||
146 | return -EINVAL; | ||
147 | } | ||
148 | |||
149 | return pcf50633_reg_write(pcf, regnr, volt_bits); | ||
150 | } | ||
151 | |||
152 | static int pcf50633_regulator_get_voltage(struct regulator_dev *rdev) | ||
153 | { | ||
154 | struct pcf50633 *pcf; | ||
155 | int regulator_id, millivolts, volt_bits; | ||
156 | u8 regnr; | ||
157 | |||
158 | pcf = rdev_get_drvdata(rdev);; | ||
159 | |||
160 | regulator_id = rdev_get_id(rdev); | ||
161 | if (regulator_id >= PCF50633_NUM_REGULATORS) | ||
162 | return -EINVAL; | ||
163 | |||
164 | regnr = pcf50633_regulator_registers[regulator_id]; | ||
165 | |||
166 | volt_bits = pcf50633_reg_read(pcf, regnr); | ||
167 | if (volt_bits < 0) | ||
168 | return -1; | ||
169 | |||
170 | switch (regulator_id) { | ||
171 | case PCF50633_REGULATOR_AUTO: | ||
172 | millivolts = auto_voltage_value(volt_bits); | ||
173 | break; | ||
174 | case PCF50633_REGULATOR_DOWN1: | ||
175 | millivolts = down_voltage_value(volt_bits); | ||
176 | break; | ||
177 | case PCF50633_REGULATOR_DOWN2: | ||
178 | millivolts = down_voltage_value(volt_bits); | ||
179 | break; | ||
180 | case PCF50633_REGULATOR_LDO1: | ||
181 | case PCF50633_REGULATOR_LDO2: | ||
182 | case PCF50633_REGULATOR_LDO3: | ||
183 | case PCF50633_REGULATOR_LDO4: | ||
184 | case PCF50633_REGULATOR_LDO5: | ||
185 | case PCF50633_REGULATOR_LDO6: | ||
186 | case PCF50633_REGULATOR_HCLDO: | ||
187 | millivolts = ldo_voltage_value(volt_bits); | ||
188 | break; | ||
189 | default: | ||
190 | return -EINVAL; | ||
191 | } | ||
192 | |||
193 | return millivolts * 1000; | ||
194 | } | ||
195 | |||
196 | static int pcf50633_regulator_enable(struct regulator_dev *rdev) | ||
197 | { | ||
198 | struct pcf50633 *pcf = rdev_get_drvdata(rdev); | ||
199 | int regulator_id; | ||
200 | u8 regnr; | ||
201 | |||
202 | regulator_id = rdev_get_id(rdev); | ||
203 | if (regulator_id >= PCF50633_NUM_REGULATORS) | ||
204 | return -EINVAL; | ||
205 | |||
206 | /* The *ENA register is always one after the *OUT register */ | ||
207 | regnr = pcf50633_regulator_registers[regulator_id] + 1; | ||
208 | |||
209 | return pcf50633_reg_set_bit_mask(pcf, regnr, PCF50633_REGULATOR_ON, | ||
210 | PCF50633_REGULATOR_ON); | ||
211 | } | ||
212 | |||
213 | static int pcf50633_regulator_disable(struct regulator_dev *rdev) | ||
214 | { | ||
215 | struct pcf50633 *pcf = rdev_get_drvdata(rdev); | ||
216 | int regulator_id; | ||
217 | u8 regnr; | ||
218 | |||
219 | regulator_id = rdev_get_id(rdev); | ||
220 | if (regulator_id >= PCF50633_NUM_REGULATORS) | ||
221 | return -EINVAL; | ||
222 | |||
223 | /* the *ENA register is always one after the *OUT register */ | ||
224 | regnr = pcf50633_regulator_registers[regulator_id] + 1; | ||
225 | |||
226 | return pcf50633_reg_set_bit_mask(pcf, regnr, | ||
227 | PCF50633_REGULATOR_ON, 0); | ||
228 | } | ||
229 | |||
230 | static int pcf50633_regulator_is_enabled(struct regulator_dev *rdev) | ||
231 | { | ||
232 | struct pcf50633 *pcf = rdev_get_drvdata(rdev); | ||
233 | int regulator_id = rdev_get_id(rdev); | ||
234 | u8 regnr; | ||
235 | |||
236 | regulator_id = rdev_get_id(rdev); | ||
237 | if (regulator_id >= PCF50633_NUM_REGULATORS) | ||
238 | return -EINVAL; | ||
239 | |||
240 | /* the *ENA register is always one after the *OUT register */ | ||
241 | regnr = pcf50633_regulator_registers[regulator_id] + 1; | ||
242 | |||
243 | return pcf50633_reg_read(pcf, regnr) & PCF50633_REGULATOR_ON; | ||
244 | } | ||
245 | |||
246 | static struct regulator_ops pcf50633_regulator_ops = { | ||
247 | .set_voltage = pcf50633_regulator_set_voltage, | ||
248 | .get_voltage = pcf50633_regulator_get_voltage, | ||
249 | .enable = pcf50633_regulator_enable, | ||
250 | .disable = pcf50633_regulator_disable, | ||
251 | .is_enabled = pcf50633_regulator_is_enabled, | ||
252 | }; | ||
253 | |||
254 | static struct regulator_desc regulators[] = { | ||
255 | [PCF50633_REGULATOR_AUTO] = | ||
256 | PCF50633_REGULATOR("auto", PCF50633_REGULATOR_AUTO), | ||
257 | [PCF50633_REGULATOR_DOWN1] = | ||
258 | PCF50633_REGULATOR("down1", PCF50633_REGULATOR_DOWN1), | ||
259 | [PCF50633_REGULATOR_DOWN2] = | ||
260 | PCF50633_REGULATOR("down2", PCF50633_REGULATOR_DOWN2), | ||
261 | [PCF50633_REGULATOR_LDO1] = | ||
262 | PCF50633_REGULATOR("ldo1", PCF50633_REGULATOR_LDO1), | ||
263 | [PCF50633_REGULATOR_LDO2] = | ||
264 | PCF50633_REGULATOR("ldo2", PCF50633_REGULATOR_LDO2), | ||
265 | [PCF50633_REGULATOR_LDO3] = | ||
266 | PCF50633_REGULATOR("ldo3", PCF50633_REGULATOR_LDO3), | ||
267 | [PCF50633_REGULATOR_LDO4] = | ||
268 | PCF50633_REGULATOR("ldo4", PCF50633_REGULATOR_LDO4), | ||
269 | [PCF50633_REGULATOR_LDO5] = | ||
270 | PCF50633_REGULATOR("ldo5", PCF50633_REGULATOR_LDO5), | ||
271 | [PCF50633_REGULATOR_LDO6] = | ||
272 | PCF50633_REGULATOR("ldo6", PCF50633_REGULATOR_LDO6), | ||
273 | [PCF50633_REGULATOR_HCLDO] = | ||
274 | PCF50633_REGULATOR("hcldo", PCF50633_REGULATOR_HCLDO), | ||
275 | [PCF50633_REGULATOR_MEMLDO] = | ||
276 | PCF50633_REGULATOR("memldo", PCF50633_REGULATOR_MEMLDO), | ||
277 | }; | ||
278 | |||
279 | static int __devinit pcf50633_regulator_probe(struct platform_device *pdev) | ||
280 | { | ||
281 | struct regulator_dev *rdev; | ||
282 | struct pcf50633 *pcf; | ||
283 | |||
284 | /* Already set by core driver */ | ||
285 | pcf = platform_get_drvdata(pdev); | ||
286 | |||
287 | rdev = regulator_register(®ulators[pdev->id], &pdev->dev, pcf); | ||
288 | if (IS_ERR(rdev)) | ||
289 | return PTR_ERR(rdev); | ||
290 | |||
291 | if (pcf->pdata->regulator_registered) | ||
292 | pcf->pdata->regulator_registered(pcf, pdev->id); | ||
293 | |||
294 | return 0; | ||
295 | } | ||
296 | |||
297 | static int __devexit pcf50633_regulator_remove(struct platform_device *pdev) | ||
298 | { | ||
299 | struct regulator_dev *rdev = platform_get_drvdata(pdev); | ||
300 | |||
301 | regulator_unregister(rdev); | ||
302 | |||
303 | return 0; | ||
304 | } | ||
305 | |||
306 | static struct platform_driver pcf50633_regulator_driver = { | ||
307 | .driver = { | ||
308 | .name = "pcf50633-regltr", | ||
309 | }, | ||
310 | .probe = pcf50633_regulator_probe, | ||
311 | .remove = __devexit_p(pcf50633_regulator_remove), | ||
312 | }; | ||
313 | |||
314 | static int __init pcf50633_regulator_init(void) | ||
315 | { | ||
316 | return platform_driver_register(&pcf50633_regulator_driver); | ||
317 | } | ||
318 | module_init(pcf50633_regulator_init); | ||
319 | |||
320 | static void __exit pcf50633_regulator_exit(void) | ||
321 | { | ||
322 | platform_driver_unregister(&pcf50633_regulator_driver); | ||
323 | } | ||
324 | module_exit(pcf50633_regulator_exit); | ||
325 | |||
326 | MODULE_AUTHOR("Balaji Rao <balajirrao@openmoko.org>"); | ||
327 | MODULE_DESCRIPTION("PCF50633 regulator driver"); | ||
328 | MODULE_LICENSE("GPL"); | ||
329 | MODULE_ALIAS("platform:pcf50633-regulator"); | ||