diff options
Diffstat (limited to 'drivers/regulator')
-rw-r--r-- | drivers/regulator/Kconfig | 7 | ||||
-rw-r--r-- | drivers/regulator/Makefile | 1 | ||||
-rw-r--r-- | drivers/regulator/wm8400-regulator.c | 368 |
3 files changed, 376 insertions, 0 deletions
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index a656128f1fdd..99906872cb91 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig | |||
@@ -56,4 +56,11 @@ config REGULATOR_BQ24022 | |||
56 | charging select between 100 mA and 500 mA charging current | 56 | charging select between 100 mA and 500 mA charging current |
57 | limit. | 57 | limit. |
58 | 58 | ||
59 | config REGULATOR_WM8400 | ||
60 | tristate "Wolfson Microelectroncis WM8400 AudioPlus PMIC" | ||
61 | depends on MFD_WM8400 | ||
62 | select REGULATOR | ||
63 | help | ||
64 | This driver provides support for the voltage regulators of the | ||
65 | WM8400 AudioPlus PMIC. | ||
59 | endmenu | 66 | endmenu |
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index ac2c64efe65c..3c6ac73af152 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile | |||
@@ -8,5 +8,6 @@ obj-$(CONFIG_REGULATOR_FIXED_VOLTAGE) += fixed.o | |||
8 | obj-$(CONFIG_REGULATOR_VIRTUAL_CONSUMER) += virtual.o | 8 | obj-$(CONFIG_REGULATOR_VIRTUAL_CONSUMER) += virtual.o |
9 | 9 | ||
10 | obj-$(CONFIG_REGULATOR_BQ24022) += bq24022.o | 10 | obj-$(CONFIG_REGULATOR_BQ24022) += bq24022.o |
11 | obj-$(CONFIG_REGULATOR_WM8400) += wm8400-regulator.o | ||
11 | 12 | ||
12 | ccflags-$(CONFIG_REGULATOR_DEBUG) += -DDEBUG | 13 | ccflags-$(CONFIG_REGULATOR_DEBUG) += -DDEBUG |
diff --git a/drivers/regulator/wm8400-regulator.c b/drivers/regulator/wm8400-regulator.c new file mode 100644 index 000000000000..48b372e038a8 --- /dev/null +++ b/drivers/regulator/wm8400-regulator.c | |||
@@ -0,0 +1,368 @@ | |||
1 | /* | ||
2 | * Regulator support for WM8400 | ||
3 | * | ||
4 | * Copyright 2008 Wolfson Microelectronics PLC. | ||
5 | * | ||
6 | * Author: Mark Brown <broonie@opensource.wolfsonmicro.com> | ||
7 | * | ||
8 | * This program is free software; you can redistribute it and/or | ||
9 | * modify it under the terms of the GNU General Public License as | ||
10 | * published by the Free Software Foundation; either version 2 of the | ||
11 | * License, or (at your option) any later version. | ||
12 | * | ||
13 | */ | ||
14 | |||
15 | #include <linux/bug.h> | ||
16 | #include <linux/err.h> | ||
17 | #include <linux/kernel.h> | ||
18 | #include <linux/regulator/driver.h> | ||
19 | #include <linux/mfd/wm8400-private.h> | ||
20 | |||
21 | static int wm8400_ldo_is_enabled(struct regulator_dev *dev) | ||
22 | { | ||
23 | struct wm8400 *wm8400 = rdev_get_drvdata(dev); | ||
24 | u16 val; | ||
25 | |||
26 | val = wm8400_reg_read(wm8400, WM8400_LDO1_CONTROL + rdev_get_id(dev)); | ||
27 | return (val & WM8400_LDO1_ENA) != 0; | ||
28 | } | ||
29 | |||
30 | static int wm8400_ldo_enable(struct regulator_dev *dev) | ||
31 | { | ||
32 | struct wm8400 *wm8400 = rdev_get_drvdata(dev); | ||
33 | |||
34 | return wm8400_set_bits(wm8400, WM8400_LDO1_CONTROL + rdev_get_id(dev), | ||
35 | WM8400_LDO1_ENA, WM8400_LDO1_ENA); | ||
36 | } | ||
37 | |||
38 | static int wm8400_ldo_disable(struct regulator_dev *dev) | ||
39 | { | ||
40 | struct wm8400 *wm8400 = rdev_get_drvdata(dev); | ||
41 | |||
42 | return wm8400_set_bits(wm8400, WM8400_LDO1_CONTROL + rdev_get_id(dev), | ||
43 | WM8400_LDO1_ENA, 0); | ||
44 | } | ||
45 | |||
46 | static int wm8400_ldo_get_voltage(struct regulator_dev *dev) | ||
47 | { | ||
48 | struct wm8400 *wm8400 = rdev_get_drvdata(dev); | ||
49 | u16 val; | ||
50 | |||
51 | val = wm8400_reg_read(wm8400, WM8400_LDO1_CONTROL + rdev_get_id(dev)); | ||
52 | val &= WM8400_LDO1_VSEL_MASK; | ||
53 | |||
54 | if (val < 15) | ||
55 | return 900000 + (val * 50000); | ||
56 | else | ||
57 | return 1600000 + ((val - 14) * 100000); | ||
58 | } | ||
59 | |||
60 | static int wm8400_ldo_set_voltage(struct regulator_dev *dev, | ||
61 | int min_uV, int max_uV) | ||
62 | { | ||
63 | struct wm8400 *wm8400 = rdev_get_drvdata(dev); | ||
64 | u16 val; | ||
65 | |||
66 | if (min_uV < 900000 || min_uV > 3300000) | ||
67 | return -EINVAL; | ||
68 | |||
69 | if (min_uV < 1700000) { | ||
70 | /* Steps of 50mV from 900mV; */ | ||
71 | val = (min_uV - 850001) / 50000; | ||
72 | |||
73 | if ((val * 50000) + 900000 > max_uV) | ||
74 | return -EINVAL; | ||
75 | BUG_ON((val * 50000) + 900000 < min_uV); | ||
76 | } else { | ||
77 | /* Steps of 100mV from 1700mV */ | ||
78 | val = ((min_uV - 1600001) / 100000); | ||
79 | |||
80 | if ((val * 100000) + 1700000 > max_uV) | ||
81 | return -EINVAL; | ||
82 | BUG_ON((val * 100000) + 1700000 < min_uV); | ||
83 | |||
84 | val += 0xf; | ||
85 | } | ||
86 | |||
87 | return wm8400_set_bits(wm8400, WM8400_LDO1_CONTROL + rdev_get_id(dev), | ||
88 | WM8400_LDO1_VSEL_MASK, val); | ||
89 | } | ||
90 | |||
91 | static struct regulator_ops wm8400_ldo_ops = { | ||
92 | .is_enabled = wm8400_ldo_is_enabled, | ||
93 | .enable = wm8400_ldo_enable, | ||
94 | .disable = wm8400_ldo_disable, | ||
95 | .get_voltage = wm8400_ldo_get_voltage, | ||
96 | .set_voltage = wm8400_ldo_set_voltage, | ||
97 | }; | ||
98 | |||
99 | static int wm8400_dcdc_is_enabled(struct regulator_dev *dev) | ||
100 | { | ||
101 | struct wm8400 *wm8400 = rdev_get_drvdata(dev); | ||
102 | int offset = (rdev_get_id(dev) - WM8400_DCDC1) * 2; | ||
103 | u16 val; | ||
104 | |||
105 | val = wm8400_reg_read(wm8400, WM8400_DCDC1_CONTROL_1 + offset); | ||
106 | return (val & WM8400_DC1_ENA) != 0; | ||
107 | } | ||
108 | |||
109 | static int wm8400_dcdc_enable(struct regulator_dev *dev) | ||
110 | { | ||
111 | struct wm8400 *wm8400 = rdev_get_drvdata(dev); | ||
112 | int offset = (rdev_get_id(dev) - WM8400_DCDC1) * 2; | ||
113 | |||
114 | return wm8400_set_bits(wm8400, WM8400_DCDC1_CONTROL_1 + offset, | ||
115 | WM8400_DC1_ENA, WM8400_DC1_ENA); | ||
116 | } | ||
117 | |||
118 | static int wm8400_dcdc_disable(struct regulator_dev *dev) | ||
119 | { | ||
120 | struct wm8400 *wm8400 = rdev_get_drvdata(dev); | ||
121 | int offset = (rdev_get_id(dev) - WM8400_DCDC1) * 2; | ||
122 | |||
123 | return wm8400_set_bits(wm8400, WM8400_DCDC1_CONTROL_1 + offset, | ||
124 | WM8400_DC1_ENA, 0); | ||
125 | } | ||
126 | |||
127 | static int wm8400_dcdc_get_voltage(struct regulator_dev *dev) | ||
128 | { | ||
129 | struct wm8400 *wm8400 = rdev_get_drvdata(dev); | ||
130 | u16 val; | ||
131 | int offset = (rdev_get_id(dev) - WM8400_DCDC1) * 2; | ||
132 | |||
133 | val = wm8400_reg_read(wm8400, WM8400_DCDC1_CONTROL_1 + offset); | ||
134 | val &= WM8400_DC1_VSEL_MASK; | ||
135 | |||
136 | return 850000 + (25000 * val); | ||
137 | } | ||
138 | |||
139 | static int wm8400_dcdc_set_voltage(struct regulator_dev *dev, | ||
140 | int min_uV, int max_uV) | ||
141 | { | ||
142 | struct wm8400 *wm8400 = rdev_get_drvdata(dev); | ||
143 | u16 val; | ||
144 | int offset = (rdev_get_id(dev) - WM8400_DCDC1) * 2; | ||
145 | |||
146 | if (min_uV < 850000) | ||
147 | return -EINVAL; | ||
148 | |||
149 | val = (min_uV - 825001) / 25000; | ||
150 | |||
151 | if (850000 + (25000 * val) > max_uV) | ||
152 | return -EINVAL; | ||
153 | BUG_ON(850000 + (25000 * val) < min_uV); | ||
154 | |||
155 | return wm8400_set_bits(wm8400, WM8400_DCDC1_CONTROL_1 + offset, | ||
156 | WM8400_DC1_VSEL_MASK, val); | ||
157 | } | ||
158 | |||
159 | static unsigned int wm8400_dcdc_get_mode(struct regulator_dev *dev) | ||
160 | { | ||
161 | struct wm8400 *wm8400 = rdev_get_drvdata(dev); | ||
162 | int offset = (rdev_get_id(dev) - WM8400_DCDC1) * 2; | ||
163 | u16 data[2]; | ||
164 | int ret; | ||
165 | |||
166 | ret = wm8400_block_read(wm8400, WM8400_DCDC1_CONTROL_1 + offset, 2, | ||
167 | data); | ||
168 | if (ret != 0) | ||
169 | return 0; | ||
170 | |||
171 | /* Datasheet: hibernate */ | ||
172 | if (data[0] & WM8400_DC1_SLEEP) | ||
173 | return REGULATOR_MODE_STANDBY; | ||
174 | |||
175 | /* Datasheet: standby */ | ||
176 | if (!(data[0] & WM8400_DC1_ACTIVE)) | ||
177 | return REGULATOR_MODE_IDLE; | ||
178 | |||
179 | /* Datasheet: active with or without force PWM */ | ||
180 | if (data[1] & WM8400_DC1_FRC_PWM) | ||
181 | return REGULATOR_MODE_FAST; | ||
182 | else | ||
183 | return REGULATOR_MODE_NORMAL; | ||
184 | } | ||
185 | |||
186 | static int wm8400_dcdc_set_mode(struct regulator_dev *dev, unsigned int mode) | ||
187 | { | ||
188 | struct wm8400 *wm8400 = rdev_get_drvdata(dev); | ||
189 | int offset = (rdev_get_id(dev) - WM8400_DCDC1) * 2; | ||
190 | int ret; | ||
191 | |||
192 | switch (mode) { | ||
193 | case REGULATOR_MODE_FAST: | ||
194 | /* Datasheet: active with force PWM */ | ||
195 | ret = wm8400_set_bits(wm8400, WM8400_DCDC1_CONTROL_2 + offset, | ||
196 | WM8400_DC1_FRC_PWM, WM8400_DC1_FRC_PWM); | ||
197 | if (ret != 0) | ||
198 | return ret; | ||
199 | |||
200 | return wm8400_set_bits(wm8400, WM8400_DCDC1_CONTROL_1 + offset, | ||
201 | WM8400_DC1_ACTIVE | WM8400_DC1_SLEEP, | ||
202 | WM8400_DC1_ACTIVE); | ||
203 | |||
204 | case REGULATOR_MODE_NORMAL: | ||
205 | /* Datasheet: active */ | ||
206 | ret = wm8400_set_bits(wm8400, WM8400_DCDC1_CONTROL_2 + offset, | ||
207 | WM8400_DC1_FRC_PWM, 0); | ||
208 | if (ret != 0) | ||
209 | return ret; | ||
210 | |||
211 | return wm8400_set_bits(wm8400, WM8400_DCDC1_CONTROL_1 + offset, | ||
212 | WM8400_DC1_ACTIVE | WM8400_DC1_SLEEP, | ||
213 | WM8400_DC1_ACTIVE); | ||
214 | |||
215 | case REGULATOR_MODE_IDLE: | ||
216 | /* Datasheet: standby */ | ||
217 | ret = wm8400_set_bits(wm8400, WM8400_DCDC1_CONTROL_1 + offset, | ||
218 | WM8400_DC1_ACTIVE, 0); | ||
219 | if (ret != 0) | ||
220 | return ret; | ||
221 | return wm8400_set_bits(wm8400, WM8400_DCDC1_CONTROL_1 + offset, | ||
222 | WM8400_DC1_SLEEP, 0); | ||
223 | |||
224 | default: | ||
225 | return -EINVAL; | ||
226 | } | ||
227 | } | ||
228 | |||
229 | static unsigned int wm8400_dcdc_get_optimum_mode(struct regulator_dev *dev, | ||
230 | int input_uV, int output_uV, | ||
231 | int load_uA) | ||
232 | { | ||
233 | return REGULATOR_MODE_NORMAL; | ||
234 | } | ||
235 | |||
236 | static struct regulator_ops wm8400_dcdc_ops = { | ||
237 | .is_enabled = wm8400_dcdc_is_enabled, | ||
238 | .enable = wm8400_dcdc_enable, | ||
239 | .disable = wm8400_dcdc_disable, | ||
240 | .get_voltage = wm8400_dcdc_get_voltage, | ||
241 | .set_voltage = wm8400_dcdc_set_voltage, | ||
242 | .get_mode = wm8400_dcdc_get_mode, | ||
243 | .set_mode = wm8400_dcdc_set_mode, | ||
244 | .get_optimum_mode = wm8400_dcdc_get_optimum_mode, | ||
245 | }; | ||
246 | |||
247 | static struct regulator_desc regulators[] = { | ||
248 | { | ||
249 | .name = "LDO1", | ||
250 | .id = WM8400_LDO1, | ||
251 | .ops = &wm8400_ldo_ops, | ||
252 | .type = REGULATOR_VOLTAGE, | ||
253 | .owner = THIS_MODULE, | ||
254 | }, | ||
255 | { | ||
256 | .name = "LDO2", | ||
257 | .id = WM8400_LDO2, | ||
258 | .ops = &wm8400_ldo_ops, | ||
259 | .type = REGULATOR_VOLTAGE, | ||
260 | .owner = THIS_MODULE, | ||
261 | }, | ||
262 | { | ||
263 | .name = "LDO3", | ||
264 | .id = WM8400_LDO3, | ||
265 | .ops = &wm8400_ldo_ops, | ||
266 | .type = REGULATOR_VOLTAGE, | ||
267 | .owner = THIS_MODULE, | ||
268 | }, | ||
269 | { | ||
270 | .name = "LDO4", | ||
271 | .id = WM8400_LDO4, | ||
272 | .ops = &wm8400_ldo_ops, | ||
273 | .type = REGULATOR_VOLTAGE, | ||
274 | .owner = THIS_MODULE, | ||
275 | }, | ||
276 | { | ||
277 | .name = "DCDC1", | ||
278 | .id = WM8400_DCDC1, | ||
279 | .ops = &wm8400_dcdc_ops, | ||
280 | .type = REGULATOR_VOLTAGE, | ||
281 | .owner = THIS_MODULE, | ||
282 | }, | ||
283 | { | ||
284 | .name = "DCDC2", | ||
285 | .id = WM8400_DCDC2, | ||
286 | .ops = &wm8400_dcdc_ops, | ||
287 | .type = REGULATOR_VOLTAGE, | ||
288 | .owner = THIS_MODULE, | ||
289 | }, | ||
290 | }; | ||
291 | |||
292 | static int __init wm8400_regulator_probe(struct platform_device *pdev) | ||
293 | { | ||
294 | struct regulator_dev *rdev; | ||
295 | |||
296 | rdev = regulator_register(®ulators[pdev->id], &pdev->dev, | ||
297 | pdev->dev.driver_data); | ||
298 | |||
299 | if (IS_ERR(rdev)) | ||
300 | return PTR_ERR(rdev); | ||
301 | |||
302 | return 0; | ||
303 | } | ||
304 | |||
305 | static int __devexit wm8400_regulator_remove(struct platform_device *pdev) | ||
306 | { | ||
307 | struct regulator_dev *rdev = platform_get_drvdata(pdev); | ||
308 | |||
309 | regulator_unregister(rdev); | ||
310 | |||
311 | return 0; | ||
312 | } | ||
313 | |||
314 | static struct platform_driver wm8400_regulator_driver = { | ||
315 | .driver = { | ||
316 | .name = "wm8400-regulator", | ||
317 | }, | ||
318 | .probe = wm8400_regulator_probe, | ||
319 | .remove = __devexit_p(wm8400_regulator_remove), | ||
320 | }; | ||
321 | |||
322 | /** | ||
323 | * wm8400_register_regulator - enable software control of a WM8400 regulator | ||
324 | * | ||
325 | * This function enables software control of a WM8400 regulator via | ||
326 | * the regulator API. It is intended to be called from the | ||
327 | * platform_init() callback of the WM8400 MFD driver. | ||
328 | * | ||
329 | * @param dev The WM8400 device to operate on. | ||
330 | * @param reg The regulator to control. | ||
331 | * @param initdata Regulator initdata for the regulator. | ||
332 | */ | ||
333 | int wm8400_register_regulator(struct device *dev, int reg, | ||
334 | struct regulator_init_data *initdata) | ||
335 | { | ||
336 | struct wm8400 *wm8400 = dev->driver_data; | ||
337 | |||
338 | if (wm8400->regulators[reg].name) | ||
339 | return -EBUSY; | ||
340 | |||
341 | initdata->driver_data = wm8400; | ||
342 | |||
343 | wm8400->regulators[reg].name = "wm8400-regulator"; | ||
344 | wm8400->regulators[reg].id = reg; | ||
345 | wm8400->regulators[reg].dev.parent = dev; | ||
346 | wm8400->regulators[reg].dev.driver_data = wm8400; | ||
347 | wm8400->regulators[reg].dev.platform_data = initdata; | ||
348 | |||
349 | return platform_device_register(&wm8400->regulators[reg]); | ||
350 | } | ||
351 | EXPORT_SYMBOL_GPL(wm8400_register_regulator); | ||
352 | |||
353 | static int __init wm8400_regulator_init(void) | ||
354 | { | ||
355 | return platform_driver_register(&wm8400_regulator_driver); | ||
356 | } | ||
357 | module_init(wm8400_regulator_init); | ||
358 | |||
359 | static void __exit wm8400_regulator_exit(void) | ||
360 | { | ||
361 | platform_driver_unregister(&wm8400_regulator_driver); | ||
362 | } | ||
363 | module_exit(wm8400_regulator_exit); | ||
364 | |||
365 | MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>"); | ||
366 | MODULE_DESCRIPTION("WM8400 regulator driver"); | ||
367 | MODULE_LICENSE("GPL"); | ||
368 | MODULE_ALIAS("platform:wm8400-regulator"); | ||