diff options
Diffstat (limited to 'drivers/power')
-rw-r--r-- | drivers/power/Kconfig | 11 | ||||
-rw-r--r-- | drivers/power/Makefile | 1 | ||||
-rw-r--r-- | drivers/power/bq27x00_battery.c | 177 | ||||
-rw-r--r-- | drivers/power/da9030_battery.c | 2 | ||||
-rw-r--r-- | drivers/power/max8925_power.c | 534 | ||||
-rw-r--r-- | drivers/power/wm8350_power.c | 26 | ||||
-rw-r--r-- | drivers/power/wm97xx_battery.c | 14 |
7 files changed, 701 insertions, 64 deletions
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig index d4b3d67f0548..faaa9b4d0d07 100644 --- a/drivers/power/Kconfig +++ b/drivers/power/Kconfig | |||
@@ -29,6 +29,13 @@ config APM_POWER | |||
29 | Say Y here to enable support APM status emulation using | 29 | Say Y here to enable support APM status emulation using |
30 | battery class devices. | 30 | battery class devices. |
31 | 31 | ||
32 | config MAX8925_POWER | ||
33 | tristate "MAX8925 battery charger support" | ||
34 | depends on MFD_MAX8925 | ||
35 | help | ||
36 | Say Y here to enable support for the battery charger in the Maxim | ||
37 | MAX8925 PMIC. | ||
38 | |||
32 | config WM831X_BACKUP | 39 | config WM831X_BACKUP |
33 | tristate "WM831X backup battery charger support" | 40 | tristate "WM831X backup battery charger support" |
34 | depends on MFD_WM831X | 41 | depends on MFD_WM831X |
@@ -98,10 +105,10 @@ config BATTERY_WM97XX | |||
98 | Say Y to enable support for battery measured by WM97xx aux port. | 105 | Say Y to enable support for battery measured by WM97xx aux port. |
99 | 106 | ||
100 | config BATTERY_BQ27x00 | 107 | config BATTERY_BQ27x00 |
101 | tristate "BQ27200 battery driver" | 108 | tristate "BQ27x00 battery driver" |
102 | depends on I2C | 109 | depends on I2C |
103 | help | 110 | help |
104 | Say Y here to enable support for batteries with BQ27200(I2C) chip. | 111 | Say Y here to enable support for batteries with BQ27x00 (I2C) chips. |
105 | 112 | ||
106 | config BATTERY_DA9030 | 113 | config BATTERY_DA9030 |
107 | tristate "DA9030 battery driver" | 114 | tristate "DA9030 battery driver" |
diff --git a/drivers/power/Makefile b/drivers/power/Makefile index 573597c683b4..a2ba7c85c97a 100644 --- a/drivers/power/Makefile +++ b/drivers/power/Makefile | |||
@@ -16,6 +16,7 @@ obj-$(CONFIG_POWER_SUPPLY) += power_supply.o | |||
16 | 16 | ||
17 | obj-$(CONFIG_PDA_POWER) += pda_power.o | 17 | obj-$(CONFIG_PDA_POWER) += pda_power.o |
18 | obj-$(CONFIG_APM_POWER) += apm_power.o | 18 | obj-$(CONFIG_APM_POWER) += apm_power.o |
19 | obj-$(CONFIG_MAX8925_POWER) += max8925_power.o | ||
19 | obj-$(CONFIG_WM831X_BACKUP) += wm831x_backup.o | 20 | obj-$(CONFIG_WM831X_BACKUP) += wm831x_backup.o |
20 | obj-$(CONFIG_WM831X_POWER) += wm831x_power.o | 21 | obj-$(CONFIG_WM831X_POWER) += wm831x_power.o |
21 | obj-$(CONFIG_WM8350_POWER) += wm8350_power.o | 22 | obj-$(CONFIG_WM8350_POWER) += wm8350_power.o |
diff --git a/drivers/power/bq27x00_battery.c b/drivers/power/bq27x00_battery.c index 62bb98124e26..bece33ed873c 100644 --- a/drivers/power/bq27x00_battery.c +++ b/drivers/power/bq27x00_battery.c | |||
@@ -26,13 +26,22 @@ | |||
26 | #include <linux/i2c.h> | 26 | #include <linux/i2c.h> |
27 | #include <asm/unaligned.h> | 27 | #include <asm/unaligned.h> |
28 | 28 | ||
29 | #define DRIVER_VERSION "1.0.0" | 29 | #define DRIVER_VERSION "1.1.0" |
30 | 30 | ||
31 | #define BQ27x00_REG_TEMP 0x06 | 31 | #define BQ27x00_REG_TEMP 0x06 |
32 | #define BQ27x00_REG_VOLT 0x08 | 32 | #define BQ27x00_REG_VOLT 0x08 |
33 | #define BQ27x00_REG_RSOC 0x0B /* Relative State-of-Charge */ | ||
34 | #define BQ27x00_REG_AI 0x14 | 33 | #define BQ27x00_REG_AI 0x14 |
35 | #define BQ27x00_REG_FLAGS 0x0A | 34 | #define BQ27x00_REG_FLAGS 0x0A |
35 | #define BQ27x00_REG_TTE 0x16 | ||
36 | #define BQ27x00_REG_TTF 0x18 | ||
37 | #define BQ27x00_REG_TTECP 0x26 | ||
38 | |||
39 | #define BQ27000_REG_RSOC 0x0B /* Relative State-of-Charge */ | ||
40 | #define BQ27000_FLAG_CHGS BIT(7) | ||
41 | |||
42 | #define BQ27500_REG_SOC 0x2c | ||
43 | #define BQ27500_FLAG_DSC BIT(0) | ||
44 | #define BQ27500_FLAG_FC BIT(9) | ||
36 | 45 | ||
37 | /* If the system has several batteries we need a different name for each | 46 | /* If the system has several batteries we need a different name for each |
38 | * of them... | 47 | * of them... |
@@ -46,25 +55,28 @@ struct bq27x00_access_methods { | |||
46 | struct bq27x00_device_info *di); | 55 | struct bq27x00_device_info *di); |
47 | }; | 56 | }; |
48 | 57 | ||
58 | enum bq27x00_chip { BQ27000, BQ27500 }; | ||
59 | |||
49 | struct bq27x00_device_info { | 60 | struct bq27x00_device_info { |
50 | struct device *dev; | 61 | struct device *dev; |
51 | int id; | 62 | int id; |
52 | int voltage_uV; | ||
53 | int current_uA; | ||
54 | int temp_C; | ||
55 | int charge_rsoc; | ||
56 | struct bq27x00_access_methods *bus; | 63 | struct bq27x00_access_methods *bus; |
57 | struct power_supply bat; | 64 | struct power_supply bat; |
65 | enum bq27x00_chip chip; | ||
58 | 66 | ||
59 | struct i2c_client *client; | 67 | struct i2c_client *client; |
60 | }; | 68 | }; |
61 | 69 | ||
62 | static enum power_supply_property bq27x00_battery_props[] = { | 70 | static enum power_supply_property bq27x00_battery_props[] = { |
71 | POWER_SUPPLY_PROP_STATUS, | ||
63 | POWER_SUPPLY_PROP_PRESENT, | 72 | POWER_SUPPLY_PROP_PRESENT, |
64 | POWER_SUPPLY_PROP_VOLTAGE_NOW, | 73 | POWER_SUPPLY_PROP_VOLTAGE_NOW, |
65 | POWER_SUPPLY_PROP_CURRENT_NOW, | 74 | POWER_SUPPLY_PROP_CURRENT_NOW, |
66 | POWER_SUPPLY_PROP_CAPACITY, | 75 | POWER_SUPPLY_PROP_CAPACITY, |
67 | POWER_SUPPLY_PROP_TEMP, | 76 | POWER_SUPPLY_PROP_TEMP, |
77 | POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW, | ||
78 | POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG, | ||
79 | POWER_SUPPLY_PROP_TIME_TO_FULL_NOW, | ||
68 | }; | 80 | }; |
69 | 81 | ||
70 | /* | 82 | /* |
@@ -74,16 +86,11 @@ static enum power_supply_property bq27x00_battery_props[] = { | |||
74 | static int bq27x00_read(u8 reg, int *rt_value, int b_single, | 86 | static int bq27x00_read(u8 reg, int *rt_value, int b_single, |
75 | struct bq27x00_device_info *di) | 87 | struct bq27x00_device_info *di) |
76 | { | 88 | { |
77 | int ret; | 89 | return di->bus->read(reg, rt_value, b_single, di); |
78 | |||
79 | ret = di->bus->read(reg, rt_value, b_single, di); | ||
80 | *rt_value = be16_to_cpu(*rt_value); | ||
81 | |||
82 | return ret; | ||
83 | } | 90 | } |
84 | 91 | ||
85 | /* | 92 | /* |
86 | * Return the battery temperature in Celsius degrees | 93 | * Return the battery temperature in tenths of degree Celsius |
87 | * Or < 0 if something fails. | 94 | * Or < 0 if something fails. |
88 | */ | 95 | */ |
89 | static int bq27x00_battery_temperature(struct bq27x00_device_info *di) | 96 | static int bq27x00_battery_temperature(struct bq27x00_device_info *di) |
@@ -97,7 +104,10 @@ static int bq27x00_battery_temperature(struct bq27x00_device_info *di) | |||
97 | return ret; | 104 | return ret; |
98 | } | 105 | } |
99 | 106 | ||
100 | return (temp >> 2) - 273; | 107 | if (di->chip == BQ27500) |
108 | return temp - 2731; | ||
109 | else | ||
110 | return ((temp >> 2) - 273) * 10; | ||
101 | } | 111 | } |
102 | 112 | ||
103 | /* | 113 | /* |
@@ -115,7 +125,7 @@ static int bq27x00_battery_voltage(struct bq27x00_device_info *di) | |||
115 | return ret; | 125 | return ret; |
116 | } | 126 | } |
117 | 127 | ||
118 | return volt; | 128 | return volt * 1000; |
119 | } | 129 | } |
120 | 130 | ||
121 | /* | 131 | /* |
@@ -134,16 +144,23 @@ static int bq27x00_battery_current(struct bq27x00_device_info *di) | |||
134 | dev_err(di->dev, "error reading current\n"); | 144 | dev_err(di->dev, "error reading current\n"); |
135 | return 0; | 145 | return 0; |
136 | } | 146 | } |
137 | ret = bq27x00_read(BQ27x00_REG_FLAGS, &flags, 0, di); | 147 | |
138 | if (ret < 0) { | 148 | if (di->chip == BQ27500) { |
139 | dev_err(di->dev, "error reading flags\n"); | 149 | /* bq27500 returns signed value */ |
140 | return 0; | 150 | curr = (int)(s16)curr; |
141 | } | 151 | } else { |
142 | if ((flags & (1 << 7)) != 0) { | 152 | ret = bq27x00_read(BQ27x00_REG_FLAGS, &flags, 0, di); |
143 | dev_dbg(di->dev, "negative current!\n"); | 153 | if (ret < 0) { |
144 | return -curr; | 154 | dev_err(di->dev, "error reading flags\n"); |
155 | return 0; | ||
156 | } | ||
157 | if (flags & BQ27000_FLAG_CHGS) { | ||
158 | dev_dbg(di->dev, "negative current!\n"); | ||
159 | curr = -curr; | ||
160 | } | ||
145 | } | 161 | } |
146 | return curr; | 162 | |
163 | return curr * 1000; | ||
147 | } | 164 | } |
148 | 165 | ||
149 | /* | 166 | /* |
@@ -155,13 +172,70 @@ static int bq27x00_battery_rsoc(struct bq27x00_device_info *di) | |||
155 | int ret; | 172 | int ret; |
156 | int rsoc = 0; | 173 | int rsoc = 0; |
157 | 174 | ||
158 | ret = bq27x00_read(BQ27x00_REG_RSOC, &rsoc, 1, di); | 175 | if (di->chip == BQ27500) |
176 | ret = bq27x00_read(BQ27500_REG_SOC, &rsoc, 0, di); | ||
177 | else | ||
178 | ret = bq27x00_read(BQ27000_REG_RSOC, &rsoc, 1, di); | ||
159 | if (ret) { | 179 | if (ret) { |
160 | dev_err(di->dev, "error reading relative State-of-Charge\n"); | 180 | dev_err(di->dev, "error reading relative State-of-Charge\n"); |
161 | return ret; | 181 | return ret; |
162 | } | 182 | } |
163 | 183 | ||
164 | return rsoc >> 8; | 184 | return rsoc; |
185 | } | ||
186 | |||
187 | static int bq27x00_battery_status(struct bq27x00_device_info *di, | ||
188 | union power_supply_propval *val) | ||
189 | { | ||
190 | int flags = 0; | ||
191 | int status; | ||
192 | int ret; | ||
193 | |||
194 | ret = bq27x00_read(BQ27x00_REG_FLAGS, &flags, 0, di); | ||
195 | if (ret < 0) { | ||
196 | dev_err(di->dev, "error reading flags\n"); | ||
197 | return ret; | ||
198 | } | ||
199 | |||
200 | if (di->chip == BQ27500) { | ||
201 | if (flags & BQ27500_FLAG_FC) | ||
202 | status = POWER_SUPPLY_STATUS_FULL; | ||
203 | else if (flags & BQ27500_FLAG_DSC) | ||
204 | status = POWER_SUPPLY_STATUS_DISCHARGING; | ||
205 | else | ||
206 | status = POWER_SUPPLY_STATUS_CHARGING; | ||
207 | } else { | ||
208 | if (flags & BQ27000_FLAG_CHGS) | ||
209 | status = POWER_SUPPLY_STATUS_CHARGING; | ||
210 | else | ||
211 | status = POWER_SUPPLY_STATUS_DISCHARGING; | ||
212 | } | ||
213 | |||
214 | val->intval = status; | ||
215 | return 0; | ||
216 | } | ||
217 | |||
218 | /* | ||
219 | * Read a time register. | ||
220 | * Return < 0 if something fails. | ||
221 | */ | ||
222 | static int bq27x00_battery_time(struct bq27x00_device_info *di, int reg, | ||
223 | union power_supply_propval *val) | ||
224 | { | ||
225 | int tval = 0; | ||
226 | int ret; | ||
227 | |||
228 | ret = bq27x00_read(reg, &tval, 0, di); | ||
229 | if (ret) { | ||
230 | dev_err(di->dev, "error reading register %02x\n", reg); | ||
231 | return ret; | ||
232 | } | ||
233 | |||
234 | if (tval == 65535) | ||
235 | return -ENODATA; | ||
236 | |||
237 | val->intval = tval * 60; | ||
238 | return 0; | ||
165 | } | 239 | } |
166 | 240 | ||
167 | #define to_bq27x00_device_info(x) container_of((x), \ | 241 | #define to_bq27x00_device_info(x) container_of((x), \ |
@@ -171,9 +245,13 @@ static int bq27x00_battery_get_property(struct power_supply *psy, | |||
171 | enum power_supply_property psp, | 245 | enum power_supply_property psp, |
172 | union power_supply_propval *val) | 246 | union power_supply_propval *val) |
173 | { | 247 | { |
248 | int ret = 0; | ||
174 | struct bq27x00_device_info *di = to_bq27x00_device_info(psy); | 249 | struct bq27x00_device_info *di = to_bq27x00_device_info(psy); |
175 | 250 | ||
176 | switch (psp) { | 251 | switch (psp) { |
252 | case POWER_SUPPLY_PROP_STATUS: | ||
253 | ret = bq27x00_battery_status(di, val); | ||
254 | break; | ||
177 | case POWER_SUPPLY_PROP_VOLTAGE_NOW: | 255 | case POWER_SUPPLY_PROP_VOLTAGE_NOW: |
178 | case POWER_SUPPLY_PROP_PRESENT: | 256 | case POWER_SUPPLY_PROP_PRESENT: |
179 | val->intval = bq27x00_battery_voltage(di); | 257 | val->intval = bq27x00_battery_voltage(di); |
@@ -189,11 +267,20 @@ static int bq27x00_battery_get_property(struct power_supply *psy, | |||
189 | case POWER_SUPPLY_PROP_TEMP: | 267 | case POWER_SUPPLY_PROP_TEMP: |
190 | val->intval = bq27x00_battery_temperature(di); | 268 | val->intval = bq27x00_battery_temperature(di); |
191 | break; | 269 | break; |
270 | case POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW: | ||
271 | ret = bq27x00_battery_time(di, BQ27x00_REG_TTE, val); | ||
272 | break; | ||
273 | case POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG: | ||
274 | ret = bq27x00_battery_time(di, BQ27x00_REG_TTECP, val); | ||
275 | break; | ||
276 | case POWER_SUPPLY_PROP_TIME_TO_FULL_NOW: | ||
277 | ret = bq27x00_battery_time(di, BQ27x00_REG_TTF, val); | ||
278 | break; | ||
192 | default: | 279 | default: |
193 | return -EINVAL; | 280 | return -EINVAL; |
194 | } | 281 | } |
195 | 282 | ||
196 | return 0; | 283 | return ret; |
197 | } | 284 | } |
198 | 285 | ||
199 | static void bq27x00_powersupply_init(struct bq27x00_device_info *di) | 286 | static void bq27x00_powersupply_init(struct bq27x00_device_info *di) |
@@ -206,10 +293,10 @@ static void bq27x00_powersupply_init(struct bq27x00_device_info *di) | |||
206 | } | 293 | } |
207 | 294 | ||
208 | /* | 295 | /* |
209 | * BQ27200 specific code | 296 | * i2c specific code |
210 | */ | 297 | */ |
211 | 298 | ||
212 | static int bq27200_read(u8 reg, int *rt_value, int b_single, | 299 | static int bq27x00_read_i2c(u8 reg, int *rt_value, int b_single, |
213 | struct bq27x00_device_info *di) | 300 | struct bq27x00_device_info *di) |
214 | { | 301 | { |
215 | struct i2c_client *client = di->client; | 302 | struct i2c_client *client = di->client; |
@@ -238,7 +325,7 @@ static int bq27200_read(u8 reg, int *rt_value, int b_single, | |||
238 | err = i2c_transfer(client->adapter, msg, 1); | 325 | err = i2c_transfer(client->adapter, msg, 1); |
239 | if (err >= 0) { | 326 | if (err >= 0) { |
240 | if (!b_single) | 327 | if (!b_single) |
241 | *rt_value = get_unaligned_be16(data); | 328 | *rt_value = get_unaligned_le16(data); |
242 | else | 329 | else |
243 | *rt_value = data[0]; | 330 | *rt_value = data[0]; |
244 | 331 | ||
@@ -248,7 +335,7 @@ static int bq27200_read(u8 reg, int *rt_value, int b_single, | |||
248 | return err; | 335 | return err; |
249 | } | 336 | } |
250 | 337 | ||
251 | static int bq27200_battery_probe(struct i2c_client *client, | 338 | static int bq27x00_battery_probe(struct i2c_client *client, |
252 | const struct i2c_device_id *id) | 339 | const struct i2c_device_id *id) |
253 | { | 340 | { |
254 | char *name; | 341 | char *name; |
@@ -267,7 +354,7 @@ static int bq27200_battery_probe(struct i2c_client *client, | |||
267 | if (retval < 0) | 354 | if (retval < 0) |
268 | return retval; | 355 | return retval; |
269 | 356 | ||
270 | name = kasprintf(GFP_KERNEL, "bq27200-%d", num); | 357 | name = kasprintf(GFP_KERNEL, "%s-%d", id->name, num); |
271 | if (!name) { | 358 | if (!name) { |
272 | dev_err(&client->dev, "failed to allocate device name\n"); | 359 | dev_err(&client->dev, "failed to allocate device name\n"); |
273 | retval = -ENOMEM; | 360 | retval = -ENOMEM; |
@@ -281,6 +368,7 @@ static int bq27200_battery_probe(struct i2c_client *client, | |||
281 | goto batt_failed_2; | 368 | goto batt_failed_2; |
282 | } | 369 | } |
283 | di->id = num; | 370 | di->id = num; |
371 | di->chip = id->driver_data; | ||
284 | 372 | ||
285 | bus = kzalloc(sizeof(*bus), GFP_KERNEL); | 373 | bus = kzalloc(sizeof(*bus), GFP_KERNEL); |
286 | if (!bus) { | 374 | if (!bus) { |
@@ -293,7 +381,7 @@ static int bq27200_battery_probe(struct i2c_client *client, | |||
293 | i2c_set_clientdata(client, di); | 381 | i2c_set_clientdata(client, di); |
294 | di->dev = &client->dev; | 382 | di->dev = &client->dev; |
295 | di->bat.name = name; | 383 | di->bat.name = name; |
296 | bus->read = &bq27200_read; | 384 | bus->read = &bq27x00_read_i2c; |
297 | di->bus = bus; | 385 | di->bus = bus; |
298 | di->client = client; | 386 | di->client = client; |
299 | 387 | ||
@@ -323,7 +411,7 @@ batt_failed_1: | |||
323 | return retval; | 411 | return retval; |
324 | } | 412 | } |
325 | 413 | ||
326 | static int bq27200_battery_remove(struct i2c_client *client) | 414 | static int bq27x00_battery_remove(struct i2c_client *client) |
327 | { | 415 | { |
328 | struct bq27x00_device_info *di = i2c_get_clientdata(client); | 416 | struct bq27x00_device_info *di = i2c_get_clientdata(client); |
329 | 417 | ||
@@ -344,27 +432,28 @@ static int bq27200_battery_remove(struct i2c_client *client) | |||
344 | * Module stuff | 432 | * Module stuff |
345 | */ | 433 | */ |
346 | 434 | ||
347 | static const struct i2c_device_id bq27200_id[] = { | 435 | static const struct i2c_device_id bq27x00_id[] = { |
348 | { "bq27200", 0 }, | 436 | { "bq27200", BQ27000 }, /* bq27200 is same as bq27000, but with i2c */ |
437 | { "bq27500", BQ27500 }, | ||
349 | {}, | 438 | {}, |
350 | }; | 439 | }; |
351 | 440 | ||
352 | static struct i2c_driver bq27200_battery_driver = { | 441 | static struct i2c_driver bq27x00_battery_driver = { |
353 | .driver = { | 442 | .driver = { |
354 | .name = "bq27200-battery", | 443 | .name = "bq27x00-battery", |
355 | }, | 444 | }, |
356 | .probe = bq27200_battery_probe, | 445 | .probe = bq27x00_battery_probe, |
357 | .remove = bq27200_battery_remove, | 446 | .remove = bq27x00_battery_remove, |
358 | .id_table = bq27200_id, | 447 | .id_table = bq27x00_id, |
359 | }; | 448 | }; |
360 | 449 | ||
361 | static int __init bq27x00_battery_init(void) | 450 | static int __init bq27x00_battery_init(void) |
362 | { | 451 | { |
363 | int ret; | 452 | int ret; |
364 | 453 | ||
365 | ret = i2c_add_driver(&bq27200_battery_driver); | 454 | ret = i2c_add_driver(&bq27x00_battery_driver); |
366 | if (ret) | 455 | if (ret) |
367 | printk(KERN_ERR "Unable to register BQ27200 driver\n"); | 456 | printk(KERN_ERR "Unable to register BQ27x00 driver\n"); |
368 | 457 | ||
369 | return ret; | 458 | return ret; |
370 | } | 459 | } |
@@ -372,7 +461,7 @@ module_init(bq27x00_battery_init); | |||
372 | 461 | ||
373 | static void __exit bq27x00_battery_exit(void) | 462 | static void __exit bq27x00_battery_exit(void) |
374 | { | 463 | { |
375 | i2c_del_driver(&bq27200_battery_driver); | 464 | i2c_del_driver(&bq27x00_battery_driver); |
376 | } | 465 | } |
377 | module_exit(bq27x00_battery_exit); | 466 | module_exit(bq27x00_battery_exit); |
378 | 467 | ||
diff --git a/drivers/power/da9030_battery.c b/drivers/power/da9030_battery.c index 3364198134a1..a2e71f7b27fb 100644 --- a/drivers/power/da9030_battery.c +++ b/drivers/power/da9030_battery.c | |||
@@ -509,7 +509,7 @@ static int da9030_battery_probe(struct platform_device *pdev) | |||
509 | 509 | ||
510 | charger->master = pdev->dev.parent; | 510 | charger->master = pdev->dev.parent; |
511 | 511 | ||
512 | /* 10 seconds between monotor runs unless platfrom defines other | 512 | /* 10 seconds between monitor runs unless platform defines other |
513 | interval */ | 513 | interval */ |
514 | charger->interval = msecs_to_jiffies( | 514 | charger->interval = msecs_to_jiffies( |
515 | (pdata->batmon_interval ? : 10) * 1000); | 515 | (pdata->batmon_interval ? : 10) * 1000); |
diff --git a/drivers/power/max8925_power.c b/drivers/power/max8925_power.c new file mode 100644 index 000000000000..a1b4410544d7 --- /dev/null +++ b/drivers/power/max8925_power.c | |||
@@ -0,0 +1,534 @@ | |||
1 | /* | ||
2 | * Battery driver for Maxim MAX8925 | ||
3 | * | ||
4 | * Copyright (c) 2009-2010 Marvell International Ltd. | ||
5 | * Haojian Zhuang <haojian.zhuang@marvell.com> | ||
6 | * | ||
7 | * This program is free software; you can redistribute it and/or modify | ||
8 | * it under the terms of the GNU General Public License version 2 as | ||
9 | * published by the Free Software Foundation. | ||
10 | */ | ||
11 | |||
12 | #include <linux/module.h> | ||
13 | #include <linux/err.h> | ||
14 | #include <linux/i2c.h> | ||
15 | #include <linux/interrupt.h> | ||
16 | #include <linux/platform_device.h> | ||
17 | #include <linux/power_supply.h> | ||
18 | #include <linux/mfd/max8925.h> | ||
19 | |||
20 | /* registers in GPM */ | ||
21 | #define MAX8925_OUT5VEN 0x54 | ||
22 | #define MAX8925_OUT3VEN 0x58 | ||
23 | #define MAX8925_CHG_CNTL1 0x7c | ||
24 | |||
25 | /* bits definition */ | ||
26 | #define MAX8925_CHG_STAT_VSYSLOW (1 << 0) | ||
27 | #define MAX8925_CHG_STAT_MODE_MASK (3 << 2) | ||
28 | #define MAX8925_CHG_STAT_EN_MASK (1 << 4) | ||
29 | #define MAX8925_CHG_MBDET (1 << 1) | ||
30 | #define MAX8925_CHG_AC_RANGE_MASK (3 << 6) | ||
31 | |||
32 | /* registers in ADC */ | ||
33 | #define MAX8925_ADC_RES_CNFG1 0x06 | ||
34 | #define MAX8925_ADC_AVG_CNFG1 0x07 | ||
35 | #define MAX8925_ADC_ACQ_CNFG1 0x08 | ||
36 | #define MAX8925_ADC_ACQ_CNFG2 0x09 | ||
37 | /* 2 bytes registers in below. MSB is 1st, LSB is 2nd. */ | ||
38 | #define MAX8925_ADC_AUX2 0x62 | ||
39 | #define MAX8925_ADC_VCHG 0x64 | ||
40 | #define MAX8925_ADC_VBBATT 0x66 | ||
41 | #define MAX8925_ADC_VMBATT 0x68 | ||
42 | #define MAX8925_ADC_ISNS 0x6a | ||
43 | #define MAX8925_ADC_THM 0x6c | ||
44 | #define MAX8925_ADC_TDIE 0x6e | ||
45 | #define MAX8925_CMD_AUX2 0xc8 | ||
46 | #define MAX8925_CMD_VCHG 0xd0 | ||
47 | #define MAX8925_CMD_VBBATT 0xd8 | ||
48 | #define MAX8925_CMD_VMBATT 0xe0 | ||
49 | #define MAX8925_CMD_ISNS 0xe8 | ||
50 | #define MAX8925_CMD_THM 0xf0 | ||
51 | #define MAX8925_CMD_TDIE 0xf8 | ||
52 | |||
53 | enum { | ||
54 | MEASURE_AUX2, | ||
55 | MEASURE_VCHG, | ||
56 | MEASURE_VBBATT, | ||
57 | MEASURE_VMBATT, | ||
58 | MEASURE_ISNS, | ||
59 | MEASURE_THM, | ||
60 | MEASURE_TDIE, | ||
61 | MEASURE_MAX, | ||
62 | }; | ||
63 | |||
64 | struct max8925_power_info { | ||
65 | struct max8925_chip *chip; | ||
66 | struct i2c_client *gpm; | ||
67 | struct i2c_client *adc; | ||
68 | |||
69 | struct power_supply ac; | ||
70 | struct power_supply usb; | ||
71 | struct power_supply battery; | ||
72 | int irq_base; | ||
73 | unsigned ac_online:1; | ||
74 | unsigned usb_online:1; | ||
75 | unsigned bat_online:1; | ||
76 | unsigned chg_mode:2; | ||
77 | unsigned batt_detect:1; /* detecing MB by ID pin */ | ||
78 | unsigned topoff_threshold:2; | ||
79 | unsigned fast_charge:3; | ||
80 | |||
81 | int (*set_charger) (int); | ||
82 | }; | ||
83 | |||
84 | static int __set_charger(struct max8925_power_info *info, int enable) | ||
85 | { | ||
86 | struct max8925_chip *chip = info->chip; | ||
87 | if (enable) { | ||
88 | /* enable charger in platform */ | ||
89 | if (info->set_charger) | ||
90 | info->set_charger(1); | ||
91 | /* enable charger */ | ||
92 | max8925_set_bits(info->gpm, MAX8925_CHG_CNTL1, 1 << 7, 0); | ||
93 | } else { | ||
94 | /* disable charge */ | ||
95 | max8925_set_bits(info->gpm, MAX8925_CHG_CNTL1, 1 << 7, 1 << 7); | ||
96 | if (info->set_charger) | ||
97 | info->set_charger(0); | ||
98 | } | ||
99 | dev_dbg(chip->dev, "%s\n", (enable) ? "Enable charger" | ||
100 | : "Disable charger"); | ||
101 | return 0; | ||
102 | } | ||
103 | |||
104 | static irqreturn_t max8925_charger_handler(int irq, void *data) | ||
105 | { | ||
106 | struct max8925_power_info *info = (struct max8925_power_info *)data; | ||
107 | struct max8925_chip *chip = info->chip; | ||
108 | |||
109 | switch (irq - chip->irq_base) { | ||
110 | case MAX8925_IRQ_VCHG_DC_R: | ||
111 | info->ac_online = 1; | ||
112 | __set_charger(info, 1); | ||
113 | dev_dbg(chip->dev, "Adapter inserted\n"); | ||
114 | break; | ||
115 | case MAX8925_IRQ_VCHG_DC_F: | ||
116 | info->ac_online = 0; | ||
117 | __set_charger(info, 0); | ||
118 | dev_dbg(chip->dev, "Adapter is removal\n"); | ||
119 | break; | ||
120 | case MAX8925_IRQ_VCHG_USB_R: | ||
121 | info->usb_online = 1; | ||
122 | __set_charger(info, 1); | ||
123 | dev_dbg(chip->dev, "USB inserted\n"); | ||
124 | break; | ||
125 | case MAX8925_IRQ_VCHG_USB_F: | ||
126 | info->usb_online = 0; | ||
127 | __set_charger(info, 0); | ||
128 | dev_dbg(chip->dev, "USB is removal\n"); | ||
129 | break; | ||
130 | case MAX8925_IRQ_VCHG_THM_OK_F: | ||
131 | /* Battery is not ready yet */ | ||
132 | dev_dbg(chip->dev, "Battery temperature is out of range\n"); | ||
133 | case MAX8925_IRQ_VCHG_DC_OVP: | ||
134 | dev_dbg(chip->dev, "Error detection\n"); | ||
135 | __set_charger(info, 0); | ||
136 | break; | ||
137 | case MAX8925_IRQ_VCHG_THM_OK_R: | ||
138 | /* Battery is ready now */ | ||
139 | dev_dbg(chip->dev, "Battery temperature is in range\n"); | ||
140 | break; | ||
141 | case MAX8925_IRQ_VCHG_SYSLOW_R: | ||
142 | /* VSYS is low */ | ||
143 | dev_info(chip->dev, "Sys power is too low\n"); | ||
144 | break; | ||
145 | case MAX8925_IRQ_VCHG_SYSLOW_F: | ||
146 | dev_dbg(chip->dev, "Sys power is above low threshold\n"); | ||
147 | break; | ||
148 | case MAX8925_IRQ_VCHG_DONE: | ||
149 | __set_charger(info, 0); | ||
150 | dev_dbg(chip->dev, "Charging is done\n"); | ||
151 | break; | ||
152 | case MAX8925_IRQ_VCHG_TOPOFF: | ||
153 | dev_dbg(chip->dev, "Charging in top-off mode\n"); | ||
154 | break; | ||
155 | case MAX8925_IRQ_VCHG_TMR_FAULT: | ||
156 | __set_charger(info, 0); | ||
157 | dev_dbg(chip->dev, "Safe timer is expired\n"); | ||
158 | break; | ||
159 | case MAX8925_IRQ_VCHG_RST: | ||
160 | __set_charger(info, 0); | ||
161 | dev_dbg(chip->dev, "Charger is reset\n"); | ||
162 | break; | ||
163 | } | ||
164 | return IRQ_HANDLED; | ||
165 | } | ||
166 | |||
167 | static int start_measure(struct max8925_power_info *info, int type) | ||
168 | { | ||
169 | unsigned char buf[2] = {0, 0}; | ||
170 | int meas_reg = 0, ret; | ||
171 | |||
172 | switch (type) { | ||
173 | case MEASURE_VCHG: | ||
174 | meas_reg = MAX8925_ADC_VCHG; | ||
175 | break; | ||
176 | case MEASURE_VBBATT: | ||
177 | meas_reg = MAX8925_ADC_VBBATT; | ||
178 | break; | ||
179 | case MEASURE_VMBATT: | ||
180 | meas_reg = MAX8925_ADC_VMBATT; | ||
181 | break; | ||
182 | case MEASURE_ISNS: | ||
183 | meas_reg = MAX8925_ADC_ISNS; | ||
184 | break; | ||
185 | default: | ||
186 | return -EINVAL; | ||
187 | } | ||
188 | |||
189 | max8925_bulk_read(info->adc, meas_reg, 2, buf); | ||
190 | ret = (buf[0] << 4) | (buf[1] >> 4); | ||
191 | |||
192 | return ret; | ||
193 | } | ||
194 | |||
195 | static int max8925_ac_get_prop(struct power_supply *psy, | ||
196 | enum power_supply_property psp, | ||
197 | union power_supply_propval *val) | ||
198 | { | ||
199 | struct max8925_power_info *info = dev_get_drvdata(psy->dev->parent); | ||
200 | int ret = 0; | ||
201 | |||
202 | switch (psp) { | ||
203 | case POWER_SUPPLY_PROP_ONLINE: | ||
204 | val->intval = info->ac_online; | ||
205 | break; | ||
206 | case POWER_SUPPLY_PROP_VOLTAGE_NOW: | ||
207 | if (info->ac_online) { | ||
208 | ret = start_measure(info, MEASURE_VCHG); | ||
209 | if (ret >= 0) { | ||
210 | val->intval = ret << 1; /* unit is mV */ | ||
211 | goto out; | ||
212 | } | ||
213 | } | ||
214 | ret = -ENODATA; | ||
215 | break; | ||
216 | default: | ||
217 | ret = -ENODEV; | ||
218 | break; | ||
219 | } | ||
220 | out: | ||
221 | return ret; | ||
222 | } | ||
223 | |||
224 | static enum power_supply_property max8925_ac_props[] = { | ||
225 | POWER_SUPPLY_PROP_ONLINE, | ||
226 | POWER_SUPPLY_PROP_VOLTAGE_NOW, | ||
227 | }; | ||
228 | |||
229 | static int max8925_usb_get_prop(struct power_supply *psy, | ||
230 | enum power_supply_property psp, | ||
231 | union power_supply_propval *val) | ||
232 | { | ||
233 | struct max8925_power_info *info = dev_get_drvdata(psy->dev->parent); | ||
234 | int ret = 0; | ||
235 | |||
236 | switch (psp) { | ||
237 | case POWER_SUPPLY_PROP_ONLINE: | ||
238 | val->intval = info->usb_online; | ||
239 | break; | ||
240 | case POWER_SUPPLY_PROP_VOLTAGE_NOW: | ||
241 | if (info->usb_online) { | ||
242 | ret = start_measure(info, MEASURE_VCHG); | ||
243 | if (ret >= 0) { | ||
244 | val->intval = ret << 1; /* unit is mV */ | ||
245 | goto out; | ||
246 | } | ||
247 | } | ||
248 | ret = -ENODATA; | ||
249 | break; | ||
250 | default: | ||
251 | ret = -ENODEV; | ||
252 | break; | ||
253 | } | ||
254 | out: | ||
255 | return ret; | ||
256 | } | ||
257 | |||
258 | static enum power_supply_property max8925_usb_props[] = { | ||
259 | POWER_SUPPLY_PROP_ONLINE, | ||
260 | POWER_SUPPLY_PROP_VOLTAGE_NOW, | ||
261 | }; | ||
262 | |||
263 | static int max8925_bat_get_prop(struct power_supply *psy, | ||
264 | enum power_supply_property psp, | ||
265 | union power_supply_propval *val) | ||
266 | { | ||
267 | struct max8925_power_info *info = dev_get_drvdata(psy->dev->parent); | ||
268 | long long int tmp = 0; | ||
269 | int ret = 0; | ||
270 | |||
271 | switch (psp) { | ||
272 | case POWER_SUPPLY_PROP_ONLINE: | ||
273 | val->intval = info->bat_online; | ||
274 | break; | ||
275 | case POWER_SUPPLY_PROP_VOLTAGE_NOW: | ||
276 | if (info->bat_online) { | ||
277 | ret = start_measure(info, MEASURE_VMBATT); | ||
278 | if (ret >= 0) { | ||
279 | val->intval = ret << 1; /* unit is mV */ | ||
280 | ret = 0; | ||
281 | break; | ||
282 | } | ||
283 | } | ||
284 | ret = -ENODATA; | ||
285 | break; | ||
286 | case POWER_SUPPLY_PROP_CURRENT_NOW: | ||
287 | if (info->bat_online) { | ||
288 | ret = start_measure(info, MEASURE_ISNS); | ||
289 | if (ret >= 0) { | ||
290 | tmp = (long long int)ret * 6250 / 4096 - 3125; | ||
291 | ret = (int)tmp; | ||
292 | val->intval = 0; | ||
293 | if (ret > 0) | ||
294 | val->intval = ret; /* unit is mA */ | ||
295 | ret = 0; | ||
296 | break; | ||
297 | } | ||
298 | } | ||
299 | ret = -ENODATA; | ||
300 | break; | ||
301 | case POWER_SUPPLY_PROP_CHARGE_TYPE: | ||
302 | if (!info->bat_online) { | ||
303 | ret = -ENODATA; | ||
304 | break; | ||
305 | } | ||
306 | ret = max8925_reg_read(info->gpm, MAX8925_CHG_STATUS); | ||
307 | ret = (ret & MAX8925_CHG_STAT_MODE_MASK) >> 2; | ||
308 | switch (ret) { | ||
309 | case 1: | ||
310 | val->intval = POWER_SUPPLY_CHARGE_TYPE_FAST; | ||
311 | break; | ||
312 | case 0: | ||
313 | case 2: | ||
314 | val->intval = POWER_SUPPLY_CHARGE_TYPE_TRICKLE; | ||
315 | break; | ||
316 | case 3: | ||
317 | val->intval = POWER_SUPPLY_CHARGE_TYPE_NONE; | ||
318 | break; | ||
319 | } | ||
320 | ret = 0; | ||
321 | break; | ||
322 | case POWER_SUPPLY_PROP_STATUS: | ||
323 | if (!info->bat_online) { | ||
324 | ret = -ENODATA; | ||
325 | break; | ||
326 | } | ||
327 | ret = max8925_reg_read(info->gpm, MAX8925_CHG_STATUS); | ||
328 | if (info->usb_online || info->ac_online) { | ||
329 | val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING; | ||
330 | if (ret & MAX8925_CHG_STAT_EN_MASK) | ||
331 | val->intval = POWER_SUPPLY_STATUS_CHARGING; | ||
332 | } else | ||
333 | val->intval = POWER_SUPPLY_STATUS_DISCHARGING; | ||
334 | ret = 0; | ||
335 | break; | ||
336 | default: | ||
337 | ret = -ENODEV; | ||
338 | break; | ||
339 | } | ||
340 | return ret; | ||
341 | } | ||
342 | |||
343 | static enum power_supply_property max8925_battery_props[] = { | ||
344 | POWER_SUPPLY_PROP_ONLINE, | ||
345 | POWER_SUPPLY_PROP_VOLTAGE_NOW, | ||
346 | POWER_SUPPLY_PROP_CURRENT_NOW, | ||
347 | POWER_SUPPLY_PROP_CHARGE_TYPE, | ||
348 | POWER_SUPPLY_PROP_STATUS, | ||
349 | }; | ||
350 | |||
351 | #define REQUEST_IRQ(_irq, _name) \ | ||
352 | do { \ | ||
353 | ret = request_threaded_irq(chip->irq_base + _irq, NULL, \ | ||
354 | max8925_charger_handler, \ | ||
355 | IRQF_ONESHOT, _name, info); \ | ||
356 | if (ret) \ | ||
357 | dev_err(chip->dev, "Failed to request IRQ #%d: %d\n", \ | ||
358 | _irq, ret); \ | ||
359 | } while (0) | ||
360 | |||
361 | static __devinit int max8925_init_charger(struct max8925_chip *chip, | ||
362 | struct max8925_power_info *info) | ||
363 | { | ||
364 | int ret; | ||
365 | |||
366 | REQUEST_IRQ(MAX8925_IRQ_VCHG_DC_OVP, "ac-ovp"); | ||
367 | REQUEST_IRQ(MAX8925_IRQ_VCHG_DC_F, "ac-remove"); | ||
368 | REQUEST_IRQ(MAX8925_IRQ_VCHG_DC_R, "ac-insert"); | ||
369 | REQUEST_IRQ(MAX8925_IRQ_VCHG_USB_OVP, "usb-ovp"); | ||
370 | REQUEST_IRQ(MAX8925_IRQ_VCHG_USB_F, "usb-remove"); | ||
371 | REQUEST_IRQ(MAX8925_IRQ_VCHG_USB_R, "usb-insert"); | ||
372 | REQUEST_IRQ(MAX8925_IRQ_VCHG_THM_OK_R, "batt-temp-in-range"); | ||
373 | REQUEST_IRQ(MAX8925_IRQ_VCHG_THM_OK_F, "batt-temp-out-range"); | ||
374 | REQUEST_IRQ(MAX8925_IRQ_VCHG_SYSLOW_F, "vsys-high"); | ||
375 | REQUEST_IRQ(MAX8925_IRQ_VCHG_SYSLOW_R, "vsys-low"); | ||
376 | REQUEST_IRQ(MAX8925_IRQ_VCHG_RST, "charger-reset"); | ||
377 | REQUEST_IRQ(MAX8925_IRQ_VCHG_DONE, "charger-done"); | ||
378 | REQUEST_IRQ(MAX8925_IRQ_VCHG_TOPOFF, "charger-topoff"); | ||
379 | REQUEST_IRQ(MAX8925_IRQ_VCHG_TMR_FAULT, "charger-timer-expire"); | ||
380 | |||
381 | info->ac_online = 0; | ||
382 | info->usb_online = 0; | ||
383 | info->bat_online = 0; | ||
384 | ret = max8925_reg_read(info->gpm, MAX8925_CHG_STATUS); | ||
385 | if (ret >= 0) { | ||
386 | /* | ||
387 | * If battery detection is enabled, ID pin of battery is | ||
388 | * connected to MBDET pin of MAX8925. It could be used to | ||
389 | * detect battery presence. | ||
390 | * Otherwise, we have to assume that battery is always on. | ||
391 | */ | ||
392 | if (info->batt_detect) | ||
393 | info->bat_online = (ret & MAX8925_CHG_MBDET) ? 0 : 1; | ||
394 | else | ||
395 | info->bat_online = 1; | ||
396 | if (ret & MAX8925_CHG_AC_RANGE_MASK) | ||
397 | info->ac_online = 1; | ||
398 | else | ||
399 | info->ac_online = 0; | ||
400 | } | ||
401 | /* disable charge */ | ||
402 | max8925_set_bits(info->gpm, MAX8925_CHG_CNTL1, 1 << 7, 1 << 7); | ||
403 | /* set charging current in charge topoff mode */ | ||
404 | max8925_set_bits(info->gpm, MAX8925_CHG_CNTL1, 3 << 5, | ||
405 | info->topoff_threshold << 5); | ||
406 | /* set charing current in fast charge mode */ | ||
407 | max8925_set_bits(info->gpm, MAX8925_CHG_CNTL1, 7, info->fast_charge); | ||
408 | |||
409 | return 0; | ||
410 | } | ||
411 | |||
412 | static __devexit int max8925_deinit_charger(struct max8925_power_info *info) | ||
413 | { | ||
414 | struct max8925_chip *chip = info->chip; | ||
415 | int irq; | ||
416 | |||
417 | irq = chip->irq_base + MAX8925_IRQ_VCHG_DC_OVP; | ||
418 | for (; irq <= chip->irq_base + MAX8925_IRQ_VCHG_TMR_FAULT; irq++) | ||
419 | free_irq(irq, info); | ||
420 | |||
421 | return 0; | ||
422 | } | ||
423 | |||
424 | static __devinit int max8925_power_probe(struct platform_device *pdev) | ||
425 | { | ||
426 | struct max8925_chip *chip = dev_get_drvdata(pdev->dev.parent); | ||
427 | struct max8925_platform_data *max8925_pdata; | ||
428 | struct max8925_power_pdata *pdata = NULL; | ||
429 | struct max8925_power_info *info; | ||
430 | int ret; | ||
431 | |||
432 | if (pdev->dev.parent->platform_data) { | ||
433 | max8925_pdata = pdev->dev.parent->platform_data; | ||
434 | pdata = max8925_pdata->power; | ||
435 | } | ||
436 | |||
437 | if (!pdata) { | ||
438 | dev_err(&pdev->dev, "platform data isn't assigned to " | ||
439 | "power supply\n"); | ||
440 | return -EINVAL; | ||
441 | } | ||
442 | |||
443 | info = kzalloc(sizeof(struct max8925_power_info), GFP_KERNEL); | ||
444 | if (!info) | ||
445 | return -ENOMEM; | ||
446 | info->chip = chip; | ||
447 | info->gpm = chip->i2c; | ||
448 | info->adc = chip->adc; | ||
449 | |||
450 | info->ac.name = "max8925-ac"; | ||
451 | info->ac.type = POWER_SUPPLY_TYPE_MAINS; | ||
452 | info->ac.properties = max8925_ac_props; | ||
453 | info->ac.num_properties = ARRAY_SIZE(max8925_ac_props); | ||
454 | info->ac.get_property = max8925_ac_get_prop; | ||
455 | ret = power_supply_register(&pdev->dev, &info->ac); | ||
456 | if (ret) | ||
457 | goto out; | ||
458 | info->ac.dev->parent = &pdev->dev; | ||
459 | |||
460 | info->usb.name = "max8925-usb"; | ||
461 | info->usb.type = POWER_SUPPLY_TYPE_USB; | ||
462 | info->usb.properties = max8925_usb_props; | ||
463 | info->usb.num_properties = ARRAY_SIZE(max8925_usb_props); | ||
464 | info->usb.get_property = max8925_usb_get_prop; | ||
465 | ret = power_supply_register(&pdev->dev, &info->usb); | ||
466 | if (ret) | ||
467 | goto out_usb; | ||
468 | info->usb.dev->parent = &pdev->dev; | ||
469 | |||
470 | info->battery.name = "max8925-battery"; | ||
471 | info->battery.type = POWER_SUPPLY_TYPE_BATTERY; | ||
472 | info->battery.properties = max8925_battery_props; | ||
473 | info->battery.num_properties = ARRAY_SIZE(max8925_battery_props); | ||
474 | info->battery.get_property = max8925_bat_get_prop; | ||
475 | ret = power_supply_register(&pdev->dev, &info->battery); | ||
476 | if (ret) | ||
477 | goto out_battery; | ||
478 | info->battery.dev->parent = &pdev->dev; | ||
479 | |||
480 | info->batt_detect = pdata->batt_detect; | ||
481 | info->topoff_threshold = pdata->topoff_threshold; | ||
482 | info->fast_charge = pdata->fast_charge; | ||
483 | info->set_charger = pdata->set_charger; | ||
484 | dev_set_drvdata(&pdev->dev, info); | ||
485 | platform_set_drvdata(pdev, info); | ||
486 | |||
487 | max8925_init_charger(chip, info); | ||
488 | return 0; | ||
489 | out_battery: | ||
490 | power_supply_unregister(&info->battery); | ||
491 | out_usb: | ||
492 | power_supply_unregister(&info->ac); | ||
493 | out: | ||
494 | kfree(info); | ||
495 | return ret; | ||
496 | } | ||
497 | |||
498 | static __devexit int max8925_power_remove(struct platform_device *pdev) | ||
499 | { | ||
500 | struct max8925_power_info *info = platform_get_drvdata(pdev); | ||
501 | |||
502 | if (info) { | ||
503 | power_supply_unregister(&info->ac); | ||
504 | power_supply_unregister(&info->usb); | ||
505 | power_supply_unregister(&info->battery); | ||
506 | max8925_deinit_charger(info); | ||
507 | kfree(info); | ||
508 | } | ||
509 | return 0; | ||
510 | } | ||
511 | |||
512 | static struct platform_driver max8925_power_driver = { | ||
513 | .probe = max8925_power_probe, | ||
514 | .remove = __devexit_p(max8925_power_remove), | ||
515 | .driver = { | ||
516 | .name = "max8925-power", | ||
517 | }, | ||
518 | }; | ||
519 | |||
520 | static int __init max8925_power_init(void) | ||
521 | { | ||
522 | return platform_driver_register(&max8925_power_driver); | ||
523 | } | ||
524 | module_init(max8925_power_init); | ||
525 | |||
526 | static void __exit max8925_power_exit(void) | ||
527 | { | ||
528 | platform_driver_unregister(&max8925_power_driver); | ||
529 | } | ||
530 | module_exit(max8925_power_exit); | ||
531 | |||
532 | MODULE_LICENSE("GPL"); | ||
533 | MODULE_DESCRIPTION("Power supply driver for MAX8925"); | ||
534 | MODULE_ALIAS("platform:max8925-power"); | ||
diff --git a/drivers/power/wm8350_power.c b/drivers/power/wm8350_power.c index ad4f071e1287..0693902d6151 100644 --- a/drivers/power/wm8350_power.c +++ b/drivers/power/wm8350_power.c | |||
@@ -190,7 +190,7 @@ static irqreturn_t wm8350_charger_handler(int irq, void *data) | |||
190 | struct wm8350_power *power = &wm8350->power; | 190 | struct wm8350_power *power = &wm8350->power; |
191 | struct wm8350_charger_policy *policy = power->policy; | 191 | struct wm8350_charger_policy *policy = power->policy; |
192 | 192 | ||
193 | switch (irq) { | 193 | switch (irq - wm8350->irq_base) { |
194 | case WM8350_IRQ_CHG_BAT_FAIL: | 194 | case WM8350_IRQ_CHG_BAT_FAIL: |
195 | dev_err(wm8350->dev, "battery failed\n"); | 195 | dev_err(wm8350->dev, "battery failed\n"); |
196 | break; | 196 | break; |
@@ -428,18 +428,18 @@ static void wm8350_init_charger(struct wm8350 *wm8350) | |||
428 | 428 | ||
429 | static void free_charger_irq(struct wm8350 *wm8350) | 429 | static void free_charger_irq(struct wm8350 *wm8350) |
430 | { | 430 | { |
431 | wm8350_free_irq(wm8350, WM8350_IRQ_CHG_BAT_HOT); | 431 | wm8350_free_irq(wm8350, WM8350_IRQ_CHG_BAT_HOT, wm8350); |
432 | wm8350_free_irq(wm8350, WM8350_IRQ_CHG_BAT_COLD); | 432 | wm8350_free_irq(wm8350, WM8350_IRQ_CHG_BAT_COLD, wm8350); |
433 | wm8350_free_irq(wm8350, WM8350_IRQ_CHG_BAT_FAIL); | 433 | wm8350_free_irq(wm8350, WM8350_IRQ_CHG_BAT_FAIL, wm8350); |
434 | wm8350_free_irq(wm8350, WM8350_IRQ_CHG_TO); | 434 | wm8350_free_irq(wm8350, WM8350_IRQ_CHG_TO, wm8350); |
435 | wm8350_free_irq(wm8350, WM8350_IRQ_CHG_END); | 435 | wm8350_free_irq(wm8350, WM8350_IRQ_CHG_END, wm8350); |
436 | wm8350_free_irq(wm8350, WM8350_IRQ_CHG_START); | 436 | wm8350_free_irq(wm8350, WM8350_IRQ_CHG_START, wm8350); |
437 | wm8350_free_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_3P9); | 437 | wm8350_free_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_3P9, wm8350); |
438 | wm8350_free_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_3P1); | 438 | wm8350_free_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_3P1, wm8350); |
439 | wm8350_free_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_2P85); | 439 | wm8350_free_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_2P85, wm8350); |
440 | wm8350_free_irq(wm8350, WM8350_IRQ_EXT_USB_FB); | 440 | wm8350_free_irq(wm8350, WM8350_IRQ_EXT_USB_FB, wm8350); |
441 | wm8350_free_irq(wm8350, WM8350_IRQ_EXT_WALL_FB); | 441 | wm8350_free_irq(wm8350, WM8350_IRQ_EXT_WALL_FB, wm8350); |
442 | wm8350_free_irq(wm8350, WM8350_IRQ_EXT_BAT_FB); | 442 | wm8350_free_irq(wm8350, WM8350_IRQ_EXT_BAT_FB, wm8350); |
443 | } | 443 | } |
444 | 444 | ||
445 | static __devinit int wm8350_power_probe(struct platform_device *pdev) | 445 | static __devinit int wm8350_power_probe(struct platform_device *pdev) |
diff --git a/drivers/power/wm97xx_battery.c b/drivers/power/wm97xx_battery.c index fa39e759a275..23eed356a854 100644 --- a/drivers/power/wm97xx_battery.c +++ b/drivers/power/wm97xx_battery.c | |||
@@ -26,7 +26,7 @@ | |||
26 | 26 | ||
27 | static DEFINE_MUTEX(bat_lock); | 27 | static DEFINE_MUTEX(bat_lock); |
28 | static struct work_struct bat_work; | 28 | static struct work_struct bat_work; |
29 | struct mutex work_lock; | 29 | static struct mutex work_lock; |
30 | static int bat_status = POWER_SUPPLY_STATUS_UNKNOWN; | 30 | static int bat_status = POWER_SUPPLY_STATUS_UNKNOWN; |
31 | static struct wm97xx_batt_info *gpdata; | 31 | static struct wm97xx_batt_info *gpdata; |
32 | static enum power_supply_property *prop; | 32 | static enum power_supply_property *prop; |
@@ -175,8 +175,14 @@ static int __devinit wm97xx_bat_probe(struct platform_device *dev) | |||
175 | dev_err(&dev->dev, "Do not pass platform_data through " | 175 | dev_err(&dev->dev, "Do not pass platform_data through " |
176 | "wm97xx_bat_set_pdata!\n"); | 176 | "wm97xx_bat_set_pdata!\n"); |
177 | return -EINVAL; | 177 | return -EINVAL; |
178 | } else | 178 | } |
179 | pdata = wmdata->batt_pdata; | 179 | |
180 | if (!wmdata) { | ||
181 | dev_err(&dev->dev, "No platform data supplied\n"); | ||
182 | return -EINVAL; | ||
183 | } | ||
184 | |||
185 | pdata = wmdata->batt_pdata; | ||
180 | 186 | ||
181 | if (dev->id != -1) | 187 | if (dev->id != -1) |
182 | return -EINVAL; | 188 | return -EINVAL; |
@@ -197,7 +203,7 @@ static int __devinit wm97xx_bat_probe(struct platform_device *dev) | |||
197 | goto err2; | 203 | goto err2; |
198 | ret = request_irq(gpio_to_irq(pdata->charge_gpio), | 204 | ret = request_irq(gpio_to_irq(pdata->charge_gpio), |
199 | wm97xx_chrg_irq, IRQF_DISABLED, | 205 | wm97xx_chrg_irq, IRQF_DISABLED, |
200 | "AC Detect", 0); | 206 | "AC Detect", dev); |
201 | if (ret) | 207 | if (ret) |
202 | goto err2; | 208 | goto err2; |
203 | props++; /* POWER_SUPPLY_PROP_STATUS */ | 209 | props++; /* POWER_SUPPLY_PROP_STATUS */ |